phy: qcom-qmp: Use correct values for ipq8074 PCIe Gen2 PHY init

commit afd55e6d1bd35b4b36847869011447a83a81c8e0 upstream.

There were some problem in ipq8074 Gen2 PCIe phy init sequence.

1. Few register values were wrongly updated in the phy init sequence.
2. The register QSERDES_RX_SIGDET_CNTRL is a RX tuning parameter
   register which is added in serdes table causing the wrong register
   was getting updated.
3. Clocks and resets were not added in the phy init.

Fix these to make Gen2 PCIe port on ipq8074 devices to work.

Fixes: eef243d04b2b6 ("phy: qcom-qmp: Add support for IPQ8074")
Cc: stable@vger.kernel.org
Co-developed-by: Selvam Sathappan Periakaruppan <speriaka@codeaurora.org>
Signed-off-by: Selvam Sathappan Periakaruppan <speriaka@codeaurora.org>
Signed-off-by: Sivaprakash Murugesan <sivaprak@codeaurora.org>
Link: https://lore.kernel.org/r/1596036607-11877-4-git-send-email-sivaprak@codeaurora.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.c b/drivers/phy/qualcomm/phy-qcom-qmp.c
index e91040af33945dea3a1004094872723dfa2e311c..ba277136f52b1fc2ff140c71eec600f405c98de8 100644 (file)
--- a/drivers/phy/qualcomm/phy-qcom-qmp.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp.c
@@ -504,8 +504,8 @@ static const struct qmp_phy_init_tbl ipq8074_pcie_serdes_tbl[] = {
        QMP_PHY_INIT_CFG(QSERDES_COM_BG_TRIM, 0xf),
        QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP_EN, 0x1),
        QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_MAP, 0x0),
-       QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_TIMER1, 0x1f),
-       QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_TIMER2, 0x3f),
+       QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_TIMER1, 0xff),
+       QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_TIMER2, 0x1f),
        QMP_PHY_INIT_CFG(QSERDES_COM_CMN_CONFIG, 0x6),
        QMP_PHY_INIT_CFG(QSERDES_COM_PLL_IVCO, 0xf),
        QMP_PHY_INIT_CFG(QSERDES_COM_HSCLK_SEL, 0x0),
@@ -531,7 +531,6 @@ static const struct qmp_phy_init_tbl ipq8074_pcie_serdes_tbl[] = {
        QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN1_MODE0, 0x0),
        QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN0_MODE0, 0x80),
        QMP_PHY_INIT_CFG(QSERDES_COM_BIAS_EN_CTRL_BY_PSM, 0x1),
-       QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_CTRL, 0xa),
        QMP_PHY_INIT_CFG(QSERDES_COM_SSC_EN_CENTER, 0x1),
        QMP_PHY_INIT_CFG(QSERDES_COM_SSC_PER1, 0x31),
        QMP_PHY_INIT_CFG(QSERDES_COM_SSC_PER2, 0x1),
@@ -540,7 +539,6 @@ static const struct qmp_phy_init_tbl ipq8074_pcie_serdes_tbl[] = {
        QMP_PHY_INIT_CFG(QSERDES_COM_SSC_STEP_SIZE1, 0x2f),
        QMP_PHY_INIT_CFG(QSERDES_COM_SSC_STEP_SIZE2, 0x19),
        QMP_PHY_INIT_CFG(QSERDES_COM_CLK_EP_DIV, 0x19),
-       QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_CNTRL, 0x7),
 };
 
 static const struct qmp_phy_init_tbl ipq8074_pcie_tx_tbl[] = {
@@ -548,6 +546,8 @@ static const struct qmp_phy_init_tbl ipq8074_pcie_tx_tbl[] = {
        QMP_PHY_INIT_CFG(QSERDES_TX_LANE_MODE, 0x6),
        QMP_PHY_INIT_CFG(QSERDES_TX_RES_CODE_LANE_OFFSET, 0x2),
        QMP_PHY_INIT_CFG(QSERDES_TX_RCV_DETECT_LVL_2, 0x12),
+       QMP_PHY_INIT_CFG(QSERDES_TX_EMP_POST1_LVL, 0x36),
+       QMP_PHY_INIT_CFG(QSERDES_TX_SLEW_CNTL, 0x0a),
 };
 
 static const struct qmp_phy_init_tbl ipq8074_pcie_rx_tbl[] = {
@@ -558,7 +558,6 @@ static const struct qmp_phy_init_tbl ipq8074_pcie_rx_tbl[] = {
        QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL4, 0xdb),
        QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x4b),
        QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SO_GAIN, 0x4),
-       QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SO_GAIN_HALF, 0x4),
 };
 
 static const struct qmp_phy_init_tbl ipq8074_pcie_pcs_tbl[] = {
@@ -1673,6 +1672,9 @@ static const struct qmp_phy_cfg msm8996_usb3phy_cfg = {
        .pwrdn_ctrl             = SW_PWRDN,
 };
 
+static const char * const ipq8074_pciephy_clk_l[] = {
+       "aux", "cfg_ahb",
+};
 /* list of resets */
 static const char * const ipq8074_pciephy_reset_l[] = {
        "phy", "common",
@@ -1690,8 +1692,8 @@ static const struct qmp_phy_cfg ipq8074_pciephy_cfg = {
        .rx_tbl_num             = ARRAY_SIZE(ipq8074_pcie_rx_tbl),
        .pcs_tbl                = ipq8074_pcie_pcs_tbl,
        .pcs_tbl_num            = ARRAY_SIZE(ipq8074_pcie_pcs_tbl),
-       .clk_list               = NULL,
-       .num_clks               = 0,
+       .clk_list               = ipq8074_pciephy_clk_l,
+       .num_clks               = ARRAY_SIZE(ipq8074_pciephy_clk_l),
        .reset_list             = ipq8074_pciephy_reset_l,
        .num_resets             = ARRAY_SIZE(ipq8074_pciephy_reset_l),
        .vreg_list              = NULL,

diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.h b/drivers/phy/qualcomm/phy-qcom-qmp.h
index 6d017a0c0c8d931cff5bc0e43d6eff504bd351a7..832b3d0984033fd58685aef81282625bf2a002ad 100644 (file)
--- a/drivers/phy/qualcomm/phy-qcom-qmp.h
+++ b/drivers/phy/qualcomm/phy-qcom-qmp.h
@@ -77,6 +77,8 @@
 #define QSERDES_COM_CORECLK_DIV_MODE1                  0x1bc
 
 /* Only for QMP V2 PHY - TX registers */
+#define QSERDES_TX_EMP_POST1_LVL                       0x018
+#define QSERDES_TX_SLEW_CNTL                           0x040
 #define QSERDES_TX_RES_CODE_LANE_OFFSET                        0x054
 #define QSERDES_TX_DEBUG_BUS_SEL                       0x064
 #define QSERDES_TX_HIGHZ_TRANSCEIVEREN_BIAS_DRVR_EN    0x068