}
}
- /* Disable any BIOS SMIs */
- writel(XHCI_LEGACY_DISABLE_SMI,
- base + ext_cap_offset + XHCI_LEGACY_CONTROL_OFFSET);
+ val = readl(base + ext_cap_offset + XHCI_LEGACY_CONTROL_OFFSET);
+ /* Mask off (turn off) any enabled SMIs */
+ val &= XHCI_LEGACY_DISABLE_SMI;
+ /* Mask all SMI events bits, RW1C */
+ val |= XHCI_LEGACY_SMI_EVENTS;
+ /* Disable any BIOS SMIs and clear all SMI events*/
+ writel(val, base + ext_cap_offset + XHCI_LEGACY_CONTROL_OFFSET);
hc_init:
op_reg_base = base + XHCI_HC_LENGTH(readl(base));
/* USB Legacy Support Control and Status Register - section 7.1.2 */
/* Add this offset, plus the value of xECP in HCCPARAMS to the base address */
#define XHCI_LEGACY_CONTROL_OFFSET (0x04)
-/* bits 1:2, 5:12, and 17:19 need to be preserved; bits 21:28 should be zero */
-#define XHCI_LEGACY_DISABLE_SMI ((0x3 << 1) + (0xff << 5) + (0x7 << 17))
+/* bits 1:3, 5:12, and 17:19 need to be preserved; bits 21:28 should be zero */
+#define XHCI_LEGACY_DISABLE_SMI ((0x7 << 1) + (0xff << 5) + (0x7 << 17))
+#define XHCI_LEGACY_SMI_EVENTS (0x7 << 29)
/* command register values to disable interrupts and halt the HC */
/* start/stop HC execution - do not write unless HC is halted*/