commit
332704a51498a7e29aa92c19dc03f11f80b71bfe upstream.
priv->tx_power_next is not initialized to max supported power,
but instead default value is used, what cause errors like
[ 58.597834] iwl3945 0000:03:00.0: Requested user TXPOWER 15 above upper limit 14.
[ 58.597839] iwl3945 0000:03:00.0: Error setting Tx power (-22).
if maximum tx power read from the eeprom is smaller than default.
In consequence card is unable to initialize properly. Fix the problem
and cleanup tx power initialization.
Reported-and-tested-by: Robin Dong <hao.bigrat@gmail.com>
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
/* RSSI to dBm */
#define IWL39_RSSI_OFFSET 95
-#define IWL_DEFAULT_TX_POWER 0x0F
-
/*
* EEPROM related constants, enums, and structures.
*/
priv->dynamic_frag_thresh = BT_FRAG_THRESHOLD_DEF;
}
- /* Set the tx_power_user_lmt to the lowest power level
- * this value will get overwritten by channel max power avg
- * from eeprom */
- priv->tx_power_user_lmt = IWLAGN_TX_POWER_TARGET_POWER_MIN;
- priv->tx_power_next = IWLAGN_TX_POWER_TARGET_POWER_MIN;
-
ret = iwl_init_channel_map(priv);
if (ret) {
IWL_ERR(priv, "initializing regulatory failed: %d\n", ret);
struct ieee80211_channel *geo_ch;
struct ieee80211_rate *rates;
int i = 0;
+ s8 max_tx_power = 0;
if (priv->bands[IEEE80211_BAND_2GHZ].n_bitrates ||
priv->bands[IEEE80211_BAND_5GHZ].n_bitrates) {
geo_ch->flags |= ch->ht40_extension_channel;
- if (ch->max_power_avg > priv->tx_power_device_lmt)
- priv->tx_power_device_lmt = ch->max_power_avg;
+ if (ch->max_power_avg > max_tx_power)
+ max_tx_power = ch->max_power_avg;
} else {
geo_ch->flags |= IEEE80211_CHAN_DISABLED;
}
geo_ch->flags);
}
+ priv->tx_power_device_lmt = max_tx_power;
+ priv->tx_power_user_lmt = max_tx_power;
+ priv->tx_power_next = max_tx_power;
+
if ((priv->bands[IEEE80211_BAND_5GHZ].n_channels == 0) &&
priv->cfg->sku & IWL_SKU_A) {
IWL_INFO(priv, "Incorrectly detected BG card as ABG. "
flags & EEPROM_CHANNEL_RADAR))
? "" : "not ");
- /* Set the tx_power_user_lmt to the highest power
- * supported by any channel */
- if (eeprom_ch_info[ch].max_power_avg >
- priv->tx_power_user_lmt)
- priv->tx_power_user_lmt =
- eeprom_ch_info[ch].max_power_avg;
-
ch_info++;
}
}
priv->force_reset[IWL_FW_RESET].reset_duration =
IWL_DELAY_NEXT_FORCE_FW_RELOAD;
-
- priv->tx_power_user_lmt = IWL_DEFAULT_TX_POWER;
- priv->tx_power_next = IWL_DEFAULT_TX_POWER;
-
if (eeprom->version < EEPROM_3945_EEPROM_VERSION) {
IWL_WARN(priv, "Unsupported EEPROM version: 0x%04X\n",
eeprom->version);