PCI/PM: Avoid putting Elo i2 PCIe Ports in D3cold
authorRafael J. Wysocki <rafael.j.wysocki@intel.com>
Thu, 31 Mar 2022 17:38:51 +0000 (19:38 +0200)
committerGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Wed, 25 May 2022 07:14:34 +0000 (09:14 +0200)
commit 92597f97a40bf661bebceb92e26ff87c76d562d4 upstream.

If a Root Port on Elo i2 is put into D3cold and then back into D0, the
downstream device becomes permanently inaccessible, so add a bridge D3 DMI
quirk for that system.

This was exposed by 14858dcc3b35 ("PCI: Use pci_update_current_state() in
pci_enable_device_flags()"), but before that commit the Root Port in
question had never been put into D3cold for real due to a mismatch between
its power state retrieved from the PCI_PM_CTRL register (which was
accessible even though the platform firmware indicated that the port was in
D3cold) and the state of an ACPI power resource involved in its power
management.

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=215715
Link: https://lore.kernel.org/r/11980172.O9o76ZdvQC@kreacher
Reported-by: Stefan Gottwald <gottwald@igel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org # v5.15+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drivers/pci/pci.c

index b9550cd4280ca5698e7df5972b50ca7811dcaa9e..d539eb379743e4e6dc59c86706a0acee3c30b892 100644 (file)
@@ -2613,6 +2613,16 @@ static const struct dmi_system_id bridge_d3_blacklist[] = {
                        DMI_MATCH(DMI_BOARD_VENDOR, "Gigabyte Technology Co., Ltd."),
                        DMI_MATCH(DMI_BOARD_NAME, "X299 DESIGNARE EX-CF"),
                },
+               /*
+                * Downstream device is not accessible after putting a root port
+                * into D3cold and back into D0 on Elo i2.
+                */
+               .ident = "Elo i2",
+               .matches = {
+                       DMI_MATCH(DMI_SYS_VENDOR, "Elo Touch Solutions"),
+                       DMI_MATCH(DMI_PRODUCT_NAME, "Elo i2"),
+                       DMI_MATCH(DMI_PRODUCT_VERSION, "RevB"),
+               },
        },
 #endif
        { }