From: Stefan Riedmueller Date: Mon, 29 Mar 2021 13:01:03 +0000 (+0200) Subject: ARM: dts: imx6: pbab01: Set vmmc supply for both SD interfaces X-Git-Tag: v5.4.112~48 X-Git-Url: https://git.fsl.cs.sunysb.edu/?a=commitdiff_plain;h=c66b672a231ca830d6a7647f944960d66dce7c04;p=wrapfs-5.3.y.git ARM: dts: imx6: pbab01: Set vmmc supply for both SD interfaces [ Upstream commit f57011e72f5fe0421ec7a812beb1b57bdf4bb47f ] Setting the vmmc supplies is crucial since otherwise the supplying regulators get disabled and the SD interfaces are no longer powered which leads to system failures if the system is booted from that SD interface. Fixes: 1e44d3f880d5 ("ARM i.MX6Q: dts: Enable I2C1 with EEPROM and PMIC on Phytec phyFLEX-i.MX6 Ouad module") Signed-off-by: Stefan Riedmueller Reviewed-by: Fabio Estevam Signed-off-by: Shawn Guo Signed-off-by: Sasha Levin --- diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi index bc43c75f1745..6678b97b1007 100644 --- a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi +++ b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi @@ -432,6 +432,7 @@ pinctrl-0 = <&pinctrl_usdhc2>; cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; wp-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>; + vmmc-supply = <&vdd_sd1_reg>; status = "disabled"; }; @@ -441,5 +442,6 @@ &pinctrl_usdhc3_cdwp>; cd-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>; wp-gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>; + vmmc-supply = <&vdd_sd0_reg>; status = "disabled"; };