Eric Dumazet [Tue, 14 Jan 2020 21:00:35 +0000 (13:00 -0800)]
macvlan: use skb_reset_mac_header() in macvlan_queue_xmit()
commit
1712b2fff8c682d145c7889d2290696647d82dab upstream.
I missed the fact that macvlan_broadcast() can be used both
in RX and TX.
skb_eth_hdr() makes only sense in TX paths, so we can not
use it blindly in macvlan_broadcast()
Fixes: 96cc4b69581d ("macvlan: do not assume mac_header is set in macvlan_broadcast()")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Jurgen Van Ham <juvanham@gmail.com>
Tested-by: Matteo Croce <mcroce@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Mikulas Patocka [Wed, 15 Jan 2020 13:35:25 +0000 (08:35 -0500)]
block: fix an integer overflow in logical block size
commit
ad6bf88a6c19a39fb3b0045d78ea880325dfcf15 upstream.
Logical block size has type unsigned short. That means that it can be at
most 32768. However, there are architectures that can run with 64k pages
(for example arm64) and on these architectures, it may be possible to
create block devices with 64k block size.
For exmaple (run this on an architecture with 64k pages):
Mount will fail with this error because it tries to read the superblock using 2-sector
access:
device-mapper: writecache: I/O is not aligned, sector 2, size 1024, block size 65536
EXT4-fs (dm-0): unable to read superblock
This patch changes the logical block size from unsigned short to unsigned
int to avoid the overflow.
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
[bwh: Backported to 3.16: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Arnd Bergmann [Tue, 7 Jan 2020 20:15:49 +0000 (21:15 +0100)]
scsi: fnic: fix invalid stack access
commit
42ec15ceaea74b5f7a621fc6686cbf69ca66c4cf upstream.
gcc -O3 warns that some local variables are not properly initialized:
drivers/scsi/fnic/vnic_dev.c: In function 'fnic_dev_hang_notify':
drivers/scsi/fnic/vnic_dev.c:511:16: error: 'a0' is used uninitialized in this function [-Werror=uninitialized]
vdev->args[0] = *a0;
~~~~~~~~~~~~~~^~~~~
drivers/scsi/fnic/vnic_dev.c:691:6: note: 'a0' was declared here
u64 a0, a1;
^~
drivers/scsi/fnic/vnic_dev.c:512:16: error: 'a1' is used uninitialized in this function [-Werror=uninitialized]
vdev->args[1] = *a1;
~~~~~~~~~~~~~~^~~~~
drivers/scsi/fnic/vnic_dev.c:691:10: note: 'a1' was declared here
u64 a0, a1;
^~
drivers/scsi/fnic/vnic_dev.c: In function 'fnic_dev_mac_addr':
drivers/scsi/fnic/vnic_dev.c:512:16: error: 'a1' is used uninitialized in this function [-Werror=uninitialized]
vdev->args[1] = *a1;
~~~~~~~~~~~~~~^~~~~
drivers/scsi/fnic/vnic_dev.c:698:10: note: 'a1' was declared here
u64 a0, a1;
^~
Apparently the code relies on the local variables occupying adjacent memory
locations in the same order, but this is of course not guaranteed.
Use an array of two u64 variables where needed to make it work correctly.
I suspect there is also an endianness bug here, but have not digged in deep
enough to be sure.
Fixes: 5df6d737dd4b ("[SCSI] fnic: Add new Cisco PCI-Express FCoE HBA")
Fixes: mmtom ("init/Kconfig: enable -O3 for all arches")
Link: https://lore.kernel.org/r/20200107201602.4096790-1-arnd@arndb.de
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
[bwh: Backported to 3.16: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Takashi Iwai [Wed, 15 Jan 2020 20:37:33 +0000 (21:37 +0100)]
ALSA: seq: Fix racy access for queue timer in proc read
commit
60adcfde92fa40fcb2dbf7cc52f9b096e0cd109a upstream.
snd_seq_info_timer_read() reads the information of the timer assigned
for each queue, but it's done in a racy way which may lead to UAF as
spotted by syzkaller.
This patch applies the missing q->timer_mutex lock while accessing the
timer object as well as a slight code change to adapt the standard
coding style.
Reported-by: syzbot+2b2ef983f973e5c40943@syzkaller.appspotmail.com
Link: https://lore.kernel.org/r/20200115203733.26530-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Jari Ruusu [Sun, 12 Jan 2020 13:00:53 +0000 (15:00 +0200)]
Fix built-in early-load Intel microcode alignment
commit
f5ae2ea6347a308cfe91f53b53682ce635497d0d upstream.
Intel Software Developer's Manual, volume 3, chapter 9.11.6 says:
"Note that the microcode update must be aligned on a 16-byte boundary
and the size of the microcode update must be 1-KByte granular"
When early-load Intel microcode is loaded from initramfs, userspace tool
'iucode_tool' has already 16-byte aligned those microcode bits in that
initramfs image. Image that was created something like this:
iucode_tool --write-earlyfw=FOO.cpio microcode-files...
However, when early-load Intel microcode is loaded from built-in
firmware BLOB using CONFIG_EXTRA_FIRMWARE= kernel config option, that
16-byte alignment is not guaranteed.
Fix this by forcing all built-in firmware BLOBs to 16-byte alignment.
[ If we end up having other firmware with much bigger alignment
requirements, we might need to introduce some method for the firmware
to specify it, this is the minimal "just increase the alignment a bit
to account for this one special case" patch - Linus ]
Signed-off-by: Jari Ruusu <jari.ruusu@gmail.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
[bwh: Backported to 3.16: adjust filename, context, indentation]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Keiya Nobuta [Thu, 9 Jan 2020 05:14:48 +0000 (14:14 +0900)]
usb: core: hub: Improved device recognition on remote wakeup
commit
9c06ac4c83df6d6fbdbf7488fbad822b4002ba19 upstream.
If hub_activate() is called before D+ has stabilized after remote
wakeup, the following situation might occur:
__ ___________________
/ \ /
D+ __/ \__/
Hub _______________________________
| ^ ^ ^
| | | |
Host _____v__|___|___________|______
| | | |
| | | \-- Interrupt Transfer (*3)
| | \-- ClearPortFeature (*2)
| \-- GetPortStatus (*1)
\-- Host detects remote wakeup
- D+ goes high, Host starts running by remote wakeup
- D+ is not stable, goes low
- Host requests GetPortStatus at (*1) and gets the following hub status:
- Current Connect Status bit is 0
- Connect Status Change bit is 1
- D+ stabilizes, goes high
- Host requests ClearPortFeature and thus Connect Status Change bit is
cleared at (*2)
- After waiting 100 ms, Host starts the Interrupt Transfer at (*3)
- Since the Connect Status Change bit is 0, Hub returns NAK.
In this case, port_event() is not called in hub_event() and Host cannot
recognize device. To solve this issue, flag change_bits even if only
Connect Status Change bit is 1 when got in the first GetPortStatus.
This issue occurs rarely because it only if D+ changes during a very
short time between GetPortStatus and ClearPortFeature. However, it is
fatal if it occurs in embedded system.
Signed-off-by: Keiya Nobuta <nobuta.keiya@fujitsu.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20200109051448.28150-1-nobuta.keiya@fujitsu.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Johan Hovold [Tue, 14 Jan 2020 08:27:29 +0000 (09:27 +0100)]
r8152: add missing endpoint sanity check
commit
86f3f4cd53707ceeec079b83205c8d3c756eca93 upstream.
Add missing endpoint sanity check to probe in order to prevent a
NULL-pointer dereference (or slab out-of-bounds access) when retrieving
the interrupt-endpoint bInterval on ndo_open() in case a device lacks
the expected endpoints.
Fixes: 40a82917b1d3 ("net/usb/r8152: enable interrupt transfer")
Cc: hayeswang <hayeswang@realtek.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Johan Hovold [Mon, 13 Jan 2020 17:22:13 +0000 (18:22 +0100)]
USB: serial: opticon: fix control-message timeouts
commit
5e28055f340275a8616eee88ef19186631b4d136 upstream.
The driver was issuing synchronous uninterruptible control requests
without using a timeout. This could lead to the driver hanging
on open() or tiocmset() due to a malfunctioning (or malicious) device
until the device is physically disconnected.
The USB upper limit of five seconds per request should be more than
enough.
Fixes: 309a057932ab ("USB: opticon: add rts and cts support")
Cc: Martin Jansen <martin.jansen@opticon.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Johan Hovold [Tue, 14 Jan 2020 08:39:53 +0000 (09:39 +0100)]
ALSA: usb-audio: fix sync-ep altsetting sanity check
commit
5d1b71226dc4d44b4b65766fa9d74492f9d4587b upstream.
The altsetting sanity check in set_sync_ep_implicit_fb_quirk() was
checking for there to be at least one altsetting but then went on to
access the second one, which may not exist.
This could lead to random slab data being used to initialise the sync
endpoint in snd_usb_add_endpoint().
Fixes: c75a8a7ae565 ("ALSA: snd-usb: add support for implicit feedback")
Fixes: ca10a7ebdff1 ("ALSA: usb-audio: FT C400 sync playback EP to capture EP")
Fixes: 5e35dc0338d8 ("ALSA: usb-audio: add implicit fb quirk for Behringer UFX1204")
Fixes: 17f08b0d9aaf ("ALSA: usb-audio: add implicit fb quirk for Axe-Fx II")
Fixes: 103e9625647a ("ALSA: usb-audio: simplify set_sync_ep_implicit_fb_quirk")
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20200114083953.1106-1-johan@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Alberto Aguirre [Wed, 18 Apr 2018 14:35:34 +0000 (09:35 -0500)]
ALSA: usb-audio: simplify set_sync_ep_implicit_fb_quirk
commit
103e9625647ad74d201e26fb74afcd8479142a37 upstream.
Signed-off-by: Alberto Aguirre <albaguirre@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Alberto Aguirre [Thu, 8 Dec 2016 06:36:48 +0000 (00:36 -0600)]
ALSA: usb-audio: add implicit fb quirk for Axe-Fx II
commit
17f08b0d9aafccdb10038ab6dbd9ddb6433c13e2 upstream.
The Axe-Fx II implicit feedback end point and the data sync endpoint
are in different interface descriptors. Add quirk to ensure a sync
endpoint is properly configured.
Signed-off-by: Alberto Aguirre <albaguirre@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
[bwh: Backported to 3.16: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Florian Westphal [Sat, 11 Jan 2020 22:19:53 +0000 (23:19 +0100)]
netfilter: arp_tables: init netns pointer in xt_tgdtor_param struct
commit
212e7f56605ef9688d0846db60c6c6ec06544095 upstream.
An earlier commit (
1b789577f655060d98d20e,
"netfilter: arp_tables: init netns pointer in xt_tgchk_param struct")
fixed missing net initialization for arptables, but turns out it was
incomplete. We can get a very similar struct net NULL deref during
error unwinding:
general protection fault: 0000 [#1] PREEMPT SMP KASAN
RIP: 0010:xt_rateest_put+0xa1/0x440 net/netfilter/xt_RATEEST.c:77
xt_rateest_tg_destroy+0x72/0xa0 net/netfilter/xt_RATEEST.c:175
cleanup_entry net/ipv4/netfilter/arp_tables.c:509 [inline]
translate_table+0x11f4/0x1d80 net/ipv4/netfilter/arp_tables.c:587
do_replace net/ipv4/netfilter/arp_tables.c:981 [inline]
do_arpt_set_ctl+0x317/0x650 net/ipv4/netfilter/arp_tables.c:1461
Also init the netns pointer in xt_tgdtor_param struct.
Fixes: add67461240c1d ("netfilter: add struct net * to target parameters")
Reported-by: syzbot+91bdd8eece0f6629ec8b@syzkaller.appspotmail.com
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
[bwh: Backported to 3.16:
- __arpt_unregister_table() has not been split out of
arpt_unregister_table()
- Add "net" parameter to arpt_unregister_table() and update its only
caller in arptable_filter.c]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Cong Wang [Fri, 10 Jan 2020 19:53:08 +0000 (11:53 -0800)]
netfilter: fix a use-after-free in mtype_destroy()
commit
c120959387efa51479056fd01dc90adfba7a590c upstream.
map->members is freed by ip_set_free() right before using it in
mtype_ext_cleanup() again. So we just have to move it down.
Reported-by: syzbot+4c3cc6dbe7259dbf9054@syzkaller.appspotmail.com
Fixes: 40cd63bf33b2 ("netfilter: ipset: Support extensions which need a per data destroy function")
Acked-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
[bwh: Backported to 3.16: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Jerónimo Borque [Thu, 9 Jan 2020 15:23:34 +0000 (12:23 -0300)]
USB: serial: simple: Add Motorola Solutions TETRA MTP3xxx and MTP85xx
commit
260e41ac4dd3e5acb90be624c03ba7f019615b75 upstream.
Add device-ids for the Motorola Solutions TETRA radios MTP3xxx series
and MTP85xx series
$ lsusb -vd 0cad:
Bus 001 Device 009: ID 0cad:9015 Motorola CGISS TETRA PEI interface
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x0cad Motorola CGISS
idProduct 0x9015
bcdDevice 24.16
iManufacturer 1
iProduct 2
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 0x0037
bNumInterfaces 2
bConfigurationValue 1
iConfiguration 3
bmAttributes 0x80
(Bus Powered)
MaxPower 500mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Bus 001 Device 010: ID 0cad:9013 Motorola CGISS TETRA PEI interface
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x0cad Motorola CGISS
idProduct 0x9013
bcdDevice 24.16
iManufacturer 1
iProduct 2
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 0x0037
bNumInterfaces 2
bConfigurationValue 1
iConfiguration 3
bmAttributes 0x80
(Bus Powered)
MaxPower 500mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Signed-off-by: Jerónimo Borque <jeronimo@borque.com.ar>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Lars Möllendorf [Fri, 13 Dec 2019 13:50:55 +0000 (14:50 +0100)]
iio: buffer: align the size of scan bytes to size of the largest element
commit
883f616530692d81cb70f8a32d85c0d2afc05f69 upstream.
Previous versions of `iio_compute_scan_bytes` only aligned each element
to its own length (i.e. its own natural alignment). Because multiple
consecutive sets of scan elements are buffered this does not work in
case the computed scan bytes do not align with the natural alignment of
the first scan element in the set.
This commit fixes this by aligning the scan bytes to the natural
alignment of the largest scan element in the set.
Fixes: 959d2952d124 ("staging:iio: make iio_sw_buffer_preenable much more general.")
Signed-off-by: Lars Möllendorf <lars.moellendorf@plating.de>
Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[bwh: Backported to 3.16: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Jian-Hong Pan [Mon, 30 Dec 2019 08:30:45 +0000 (16:30 +0800)]
platform/x86: asus-wmi: Fix keyboard brightness cannot be set to 0
commit
176a7fca81c5090a7240664e3002c106d296bf31 upstream.
Some of ASUS laptops like UX431FL keyboard backlight cannot be set to
brightness 0. According to ASUS' information, the brightness should be
0x80 ~ 0x83. This patch fixes it by following the logic.
Fixes: e9809c0b9670 ("asus-wmi: add keyboard backlight support")
Signed-off-by: Jian-Hong Pan <jian-hong@endlessm.com>
Reviewed-by: Daniel Drake <drake@endlessm.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Johan Hovold [Fri, 10 Jan 2020 20:01:27 +0000 (12:01 -0800)]
Input: sur40 - fix interface sanity checks
commit
6b32391ed675827f8425a414abbc6fbd54ea54fe upstream.
Make sure to use the current alternate setting when verifying the
interface descriptors to avoid binding to an invalid interface.
This in turn could cause the driver to misbehave or trigger a WARN() in
usb_submit_urb() that kernels with panic_on_warn set would choke on.
Fixes: bdb5c57f209c ("Input: add sur40 driver for Samsung SUR40 (aka MS Surface 2.0/Pixelsense)")
Signed-off-by: Johan Hovold <johan@kernel.org>
Acked-by: Vladis Dronov <vdronov@redhat.com>
Link: https://lore.kernel.org/r/20191210113737.4016-8-johan@kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Johan Hovold [Fri, 10 Jan 2020 20:00:18 +0000 (12:00 -0800)]
Input: gtco - fix endpoint sanity check
commit
a8eeb74df5a6bdb214b2b581b14782c5f5a0cf83 upstream.
The driver was checking the number of endpoints of the first alternate
setting instead of the current one, something which could lead to the
driver binding to an invalid interface.
This in turn could cause the driver to misbehave or trigger a WARN() in
usb_submit_urb() that kernels with panic_on_warn set would choke on.
Fixes: 162f98dea487 ("Input: gtco - fix crash on detecting device without endpoints")
Signed-off-by: Johan Hovold <johan@kernel.org>
Acked-by: Vladis Dronov <vdronov@redhat.com>
Link: https://lore.kernel.org/r/20191210113737.4016-5-johan@kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Johan Hovold [Fri, 10 Jan 2020 19:59:32 +0000 (11:59 -0800)]
Input: aiptek - fix endpoint sanity check
commit
3111491fca4f01764e0c158c5e0f7ced808eef51 upstream.
The driver was checking the number of endpoints of the first alternate
setting instead of the current one, something which could lead to the
driver binding to an invalid interface.
This in turn could cause the driver to misbehave or trigger a WARN() in
usb_submit_urb() that kernels with panic_on_warn set would choke on.
Fixes: 8e20cf2bce12 ("Input: aiptek - fix crash on detecting device without endpoints")
Signed-off-by: Johan Hovold <johan@kernel.org>
Acked-by: Vladis Dronov <vdronov@redhat.com>
Link: https://lore.kernel.org/r/20191210113737.4016-3-johan@kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Jiri Kosina [Fri, 10 Jan 2020 14:32:51 +0000 (15:32 +0100)]
HID: hidraw, uhid: Always report EPOLLOUT
commit
9e635c2851df6caee651e589fbf937b637973c91 upstream.
hidraw and uhid device nodes are always available for writing so we should
always report EPOLLOUT and EPOLLWRNORM bits, not only in the cases when
there is nothing to read.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Fixes: be54e7461ffdc ("HID: uhid: Fix returning EPOLLOUT from uhid_char_poll")
Fixes: 9f3b61dc1dd7b ("HID: hidraw: Fix returning EPOLLOUT from hidraw_poll")
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
[bwh: Backported to 3.16:
- Use unsigned int type instead of __poll_t
- s/EPOLL/POLL/g]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Marcel Holtmann [Wed, 4 Dec 2019 02:37:13 +0000 (03:37 +0100)]
HID: hidraw: Fix returning EPOLLOUT from hidraw_poll
commit
9f3b61dc1dd7b81e99e7ed23776bb64a35f39e1a upstream.
When polling a connected /dev/hidrawX device, it is useful to get the
EPOLLOUT when writing is possible. Since writing is possible as soon as
the device is connected, always return it.
Right now EPOLLOUT is only returned when there are also input reports
are available. This works if devices start sending reports when
connected, but some HID devices might need an output report first before
sending any input reports. This change will allow using EPOLLOUT here as
well.
Fixes: 378b80370aa1 ("hidraw: Return EPOLLOUT from hidraw_poll")
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
[bwh: Backported to 3.16: s/EPOLL/POLL/g]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Fabian Henneke [Tue, 9 Jul 2019 11:03:37 +0000 (13:03 +0200)]
hidraw: Return EPOLLOUT from hidraw_poll
commit
378b80370aa1fe50f9c48a3ac8af3e416e73b89f upstream.
Always return EPOLLOUT from hidraw_poll when a device is connected.
This is safe since writes are always possible (but will always block).
hidraw does not support non-blocking writes and instead always calls
blocking backend functions on write requests. Hence, so far, a call to
poll never returned EPOLLOUT, which confuses tools like socat.
Signed-off-by: Fabian Henneke <fabian.henneke@gmail.com>
In-reply-to: <CA+hv5qkyis03CgYTWeWX9cr0my-d2Oe+aZo+mjmWRXgjrGqyrw@mail.gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
[bwh: Backported to 3.16: s/EPOLL/POLL/]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
James Bottomley [Thu, 9 Jan 2020 01:21:32 +0000 (17:21 -0800)]
scsi: enclosure: Fix stale device oops with hot replug
commit
529244bd1afc102ab164429d338d310d5d65e60d upstream.
Doing an add/remove/add on a SCSI device in an enclosure leads to an oops
caused by poisoned values in the enclosure device list pointers. The
reason is because we are keeping the enclosure device across the enclosed
device add/remove/add but the current code is doing a
device_add/device_del/device_add on it. This is the wrong thing to do in
sysfs, so fix it by not doing a device_del on the enclosure device simply
because of a hot remove of the drive in the slot.
[mkp: added missing email addresses]
Fixes: 43d8eb9cfd0a ("[SCSI] ses: add support for enclosure component hot removal")
Link: https://lore.kernel.org/r/1578532892.3852.10.camel@HansenPartnership.com
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Reported-by: Luo Jiaxing <luojiaxing@huawei.com>
Tested-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Xiang Chen [Thu, 9 Jan 2020 01:12:24 +0000 (09:12 +0800)]
scsi: sd: Clear sdkp->protection_type if disk is reformatted without PI
commit
465f4edaecc6c37f81349233e84d46246bcac11a upstream.
If an attached disk with protection information enabled is reformatted
to Type 0 the revalidation code does not clear the original protection
type and subsequent accesses will keep setting RDPROTECT/WRPROTECT.
Set the protection type to 0 if the disk reports PROT_EN=0 in READ
CAPACITY(16).
[mkp: commit desc]
Fixes: fe542396da73 ("[SCSI] sd: Ensure we correctly disable devices with unknown protection type")
Link: https://lore.kernel.org/r/1578532344-101668-1-git-send-email-chenxiang66@hisilicon.com
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Radoslaw Tyl [Mon, 25 Nov 2019 14:24:52 +0000 (15:24 +0100)]
ixgbevf: Remove limit of 10 entries for unicast filter list
commit
aa604651d523b1493988d0bf6710339f3ee60272 upstream.
Currently, though the FDB entry is added to VF, it does not appear in
RAR filters. VF driver only allows to add 10 entries. Attempting to add
another causes an error. This patch removes limitation and allows use of
all free RAR entries for the FDB if needed.
Fixes: 46ec20ff7d ("ixgbevf: Add macvlan support in the set rx mode op")
Signed-off-by: Radoslaw Tyl <radoslawx.tyl@intel.com>
Acked-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Florian Westphal [Wed, 8 Jan 2020 09:59:38 +0000 (10:59 +0100)]
netfilter: ipset: avoid null deref when IPSET_ATTR_LINENO is present
commit
22dad713b8a5ff488e07b821195270672f486eb2 upstream.
The set uadt functions assume lineno is never NULL, but it is in
case of ip_set_utest().
syzkaller managed to generate a netlink message that calls this with
LINENO attr present:
general protection fault: 0000 [#1] PREEMPT SMP KASAN
RIP: 0010:hash_mac4_uadt+0x1bc/0x470 net/netfilter/ipset/ip_set_hash_mac.c:104
Call Trace:
ip_set_utest+0x55b/0x890 net/netfilter/ipset/ip_set_core.c:1867
nfnetlink_rcv_msg+0xcf2/0xfb0 net/netfilter/nfnetlink.c:229
netlink_rcv_skb+0x177/0x450 net/netlink/af_netlink.c:2477
nfnetlink_rcv+0x1ba/0x460 net/netfilter/nfnetlink.c:563
pass a dummy lineno storage, its easier than patching all set
implementations.
This seems to be a day-0 bug.
Cc: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Reported-by: syzbot+34bd2369d38707f3f4a7@syzkaller.appspotmail.com
Fixes: a7b4f989a6294 ("netfilter: ipset: IP set core support")
Signed-off-by: Florian Westphal <fw@strlen.de>
Acked-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
[bwh: Backported to 3.16: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Eric Dumazet [Mon, 6 Jan 2020 20:30:48 +0000 (12:30 -0800)]
macvlan: do not assume mac_header is set in macvlan_broadcast()
commit
96cc4b69581db68efc9749ef32e9cf8e0160c509 upstream.
Use of eth_hdr() in tx path is error prone.
Many drivers call skb_reset_mac_header() before using it,
but others do not.
Commit
6d1ccff62780 ("net: reset mac header in dev_start_xmit()")
attempted to fix this generically, but commit
d346a3fae3ff
("packet: introduce PACKET_QDISC_BYPASS socket option") brought
back the macvlan bug.
Lets add a new helper, so that tx paths no longer have
to call skb_reset_mac_header() only to get a pointer
to skb->data.
Hopefully we will be able to revert
6d1ccff62780
("net: reset mac header in dev_start_xmit()") and save few cycles
in transmit fast path.
BUG: KASAN: use-after-free in __get_unaligned_cpu32 include/linux/unaligned/packed_struct.h:19 [inline]
BUG: KASAN: use-after-free in mc_hash drivers/net/macvlan.c:251 [inline]
BUG: KASAN: use-after-free in macvlan_broadcast+0x547/0x620 drivers/net/macvlan.c:277
Read of size 4 at addr
ffff8880a4932401 by task syz-executor947/9579
CPU: 0 PID: 9579 Comm: syz-executor947 Not tainted 5.5.0-rc4-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x197/0x210 lib/dump_stack.c:118
print_address_description.constprop.0.cold+0xd4/0x30b mm/kasan/report.c:374
__kasan_report.cold+0x1b/0x41 mm/kasan/report.c:506
kasan_report+0x12/0x20 mm/kasan/common.c:639
__asan_report_load_n_noabort+0xf/0x20 mm/kasan/generic_report.c:145
__get_unaligned_cpu32 include/linux/unaligned/packed_struct.h:19 [inline]
mc_hash drivers/net/macvlan.c:251 [inline]
macvlan_broadcast+0x547/0x620 drivers/net/macvlan.c:277
macvlan_queue_xmit drivers/net/macvlan.c:520 [inline]
macvlan_start_xmit+0x402/0x77f drivers/net/macvlan.c:559
__netdev_start_xmit include/linux/netdevice.h:4447 [inline]
netdev_start_xmit include/linux/netdevice.h:4461 [inline]
dev_direct_xmit+0x419/0x630 net/core/dev.c:4079
packet_direct_xmit+0x1a9/0x250 net/packet/af_packet.c:240
packet_snd net/packet/af_packet.c:2966 [inline]
packet_sendmsg+0x260d/0x6220 net/packet/af_packet.c:2991
sock_sendmsg_nosec net/socket.c:639 [inline]
sock_sendmsg+0xd7/0x130 net/socket.c:659
__sys_sendto+0x262/0x380 net/socket.c:1985
__do_sys_sendto net/socket.c:1997 [inline]
__se_sys_sendto net/socket.c:1993 [inline]
__x64_sys_sendto+0xe1/0x1a0 net/socket.c:1993
do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294
entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x442639
Code: 18 89 d0 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 5b 10 fc ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:
00007ffc13549e08 EFLAGS:
00000246 ORIG_RAX:
000000000000002c
RAX:
ffffffffffffffda RBX:
0000000000000003 RCX:
0000000000442639
RDX:
000000000000000e RSI:
0000000020000080 RDI:
0000000000000003
RBP:
0000000000000004 R08:
0000000000000000 R09:
0000000000000000
R10:
0000000000000000 R11:
0000000000000246 R12:
0000000000000000
R13:
0000000000403bb0 R14:
0000000000000000 R15:
0000000000000000
Allocated by task 9389:
save_stack+0x23/0x90 mm/kasan/common.c:72
set_track mm/kasan/common.c:80 [inline]
__kasan_kmalloc mm/kasan/common.c:513 [inline]
__kasan_kmalloc.constprop.0+0xcf/0xe0 mm/kasan/common.c:486
kasan_kmalloc+0x9/0x10 mm/kasan/common.c:527
__do_kmalloc mm/slab.c:3656 [inline]
__kmalloc+0x163/0x770 mm/slab.c:3665
kmalloc include/linux/slab.h:561 [inline]
tomoyo_realpath_from_path+0xc5/0x660 security/tomoyo/realpath.c:252
tomoyo_get_realpath security/tomoyo/file.c:151 [inline]
tomoyo_path_perm+0x230/0x430 security/tomoyo/file.c:822
tomoyo_inode_getattr+0x1d/0x30 security/tomoyo/tomoyo.c:129
security_inode_getattr+0xf2/0x150 security/security.c:1222
vfs_getattr+0x25/0x70 fs/stat.c:115
vfs_statx_fd+0x71/0xc0 fs/stat.c:145
vfs_fstat include/linux/fs.h:3265 [inline]
__do_sys_newfstat+0x9b/0x120 fs/stat.c:378
__se_sys_newfstat fs/stat.c:375 [inline]
__x64_sys_newfstat+0x54/0x80 fs/stat.c:375
do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294
entry_SYSCALL_64_after_hwframe+0x49/0xbe
Freed by task 9389:
save_stack+0x23/0x90 mm/kasan/common.c:72
set_track mm/kasan/common.c:80 [inline]
kasan_set_free_info mm/kasan/common.c:335 [inline]
__kasan_slab_free+0x102/0x150 mm/kasan/common.c:474
kasan_slab_free+0xe/0x10 mm/kasan/common.c:483
__cache_free mm/slab.c:3426 [inline]
kfree+0x10a/0x2c0 mm/slab.c:3757
tomoyo_realpath_from_path+0x1a7/0x660 security/tomoyo/realpath.c:289
tomoyo_get_realpath security/tomoyo/file.c:151 [inline]
tomoyo_path_perm+0x230/0x430 security/tomoyo/file.c:822
tomoyo_inode_getattr+0x1d/0x30 security/tomoyo/tomoyo.c:129
security_inode_getattr+0xf2/0x150 security/security.c:1222
vfs_getattr+0x25/0x70 fs/stat.c:115
vfs_statx_fd+0x71/0xc0 fs/stat.c:145
vfs_fstat include/linux/fs.h:3265 [inline]
__do_sys_newfstat+0x9b/0x120 fs/stat.c:378
__se_sys_newfstat fs/stat.c:375 [inline]
__x64_sys_newfstat+0x54/0x80 fs/stat.c:375
do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294
entry_SYSCALL_64_after_hwframe+0x49/0xbe
The buggy address belongs to the object at
ffff8880a4932000
which belongs to the cache kmalloc-4k of size 4096
The buggy address is located 1025 bytes inside of
4096-byte region [
ffff8880a4932000,
ffff8880a4933000)
The buggy address belongs to the page:
page:
ffffea0002924c80 refcount:1 mapcount:0 mapping:
ffff8880aa402000 index:0x0 compound_mapcount: 0
raw:
00fffe0000010200 ffffea0002846208 ffffea00028f3888 ffff8880aa402000
raw:
0000000000000000 ffff8880a4932000 0000000100000001 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff8880a4932300: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff8880a4932380: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
>
ffff8880a4932400: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff8880a4932480: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff8880a4932500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
Fixes: b863ceb7ddce ("[NET]: Add macvlan driver")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
[bwh: Backported to 3.16: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Eric Dumazet [Mon, 6 Jan 2020 14:10:39 +0000 (06:10 -0800)]
pkt_sched: fq: do not accept silly TCA_FQ_QUANTUM
commit
d9e15a2733067c9328fb56d98fe8e574fa19ec31 upstream.
As diagnosed by Florian :
If TCA_FQ_QUANTUM is set to 0x80000000, fq_deueue()
can loop forever in :
if (f->credit <= 0) {
f->credit += q->quantum;
goto begin;
}
... because f->credit is either 0 or -
2147483648.
Let's limit TCA_FQ_QUANTUM to no more than 1 << 20 :
This max value should limit risks of breaking user setups
while fixing this bug.
Fixes: afe4fd062416 ("pkt_sched: fq: Fair Queue packet scheduler")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Diagnosed-by: Florian Westphal <fw@strlen.de>
Reported-by: syzbot+dc9071cc5a85950bdfce@syzkaller.appspotmail.com
Signed-off-by: David S. Miller <davem@davemloft.net>
[bwh: Backported to 3.16: Drop call to NL_SET_ERR_MSG_MOD() as extack is
not supported.]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Kenneth Klette Jonassen [Tue, 3 Feb 2015 16:49:18 +0000 (17:49 +0100)]
pkt_sched: fq: avoid hang when quantum 0
commit
3725a269815ba6dbb415feddc47da5af7d1fac58 upstream.
Configuring fq with quantum 0 hangs the system, presumably because of a
non-interruptible infinite loop. Either way quantum 0 does not make sense.
Reproduce with:
sudo tc qdisc add dev lo root fq quantum 0 initial_quantum 0
ping 127.0.0.1
Signed-off-by: Kenneth Klette Jonassen <kennetkl@ifi.uio.no>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Chen-Yu Tsai [Mon, 6 Jan 2020 03:09:22 +0000 (11:09 +0800)]
net: stmmac: dwmac-sunxi: Allow all RGMII modes
commit
52cc73e5404c7ba0cbfc50cb4c265108c84b3d5a upstream.
Allow all the RGMII modes to be used. This would allow us to represent
the hardware better in the device tree with RGMII_ID where in most
cases the PHY's internal delay for both RX and TX are used.
Fixes: af0bd4e9ba80 ("net: stmmac: sunxi platform extensions for GMAC in Allwinner A20 SoC's")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Eric Dumazet [Tue, 7 Jan 2020 09:42:25 +0000 (01:42 -0800)]
vlan: vlan_changelink() should propagate errors
commit
eb8ef2a3c50092bb018077c047b8dba1ce0e78e3 upstream.
Both vlan_dev_change_flags() and vlan_dev_set_egress_priority()
can return an error. vlan_changelink() should not ignore them.
Fixes: 07b5b17e157b ("[VLAN]: Use rtnl_link API")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Xin Long [Sat, 4 Jan 2020 06:15:02 +0000 (14:15 +0800)]
sctp: free cmd->obj.chunk for the unprocessed SCTP_CMD_REPLY
commit
be7a7729207797476b6666f046d765bdf9630407 upstream.
This patch is to fix a memleak caused by no place to free cmd->obj.chunk
for the unprocessed SCTP_CMD_REPLY. This issue occurs when failing to
process a cmd while there're still SCTP_CMD_REPLY cmds on the cmd seq
with an allocated chunk in cmd->obj.chunk.
So fix it by freeing cmd->obj.chunk for each SCTP_CMD_REPLY cmd left on
the cmd seq when any cmd returns error. While at it, also remove 'nomem'
label.
Reported-by: syzbot+107c4aff5f392bf1517f@syzkaller.appspotmail.com
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Will Deacon [Thu, 19 Dec 2019 12:02:03 +0000 (12:02 +0000)]
chardev: Avoid potential use-after-free in 'chrdev_open()'
commit
68faa679b8be1a74e6663c21c3a9d25d32f1c079 upstream.
'chrdev_open()' calls 'cdev_get()' to obtain a reference to the
'struct cdev *' stashed in the 'i_cdev' field of the target inode
structure. If the pointer is NULL, then it is initialised lazily by
looking up the kobject in the 'cdev_map' and so the whole procedure is
protected by the 'cdev_lock' spinlock to serialise initialisation of
the shared pointer.
Unfortunately, it is possible for the initialising thread to fail *after*
installing the new pointer, for example if the subsequent '->open()' call
on the file fails. In this case, 'cdev_put()' is called, the reference
count on the kobject is dropped and, if nobody else has taken a reference,
the release function is called which finally clears 'inode->i_cdev' from
'cdev_purge()' before potentially freeing the object. The problem here
is that a racing thread can happily take the 'cdev_lock' and see the
non-NULL pointer in the inode, which can result in a refcount increment
from zero and a warning:
| ------------[ cut here ]------------
| refcount_t: addition on 0; use-after-free.
| WARNING: CPU: 2 PID: 6385 at lib/refcount.c:25 refcount_warn_saturate+0x6d/0xf0
| Modules linked in:
| CPU: 2 PID: 6385 Comm: repro Not tainted 5.5.0-rc2+ #22
| Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014
| RIP: 0010:refcount_warn_saturate+0x6d/0xf0
| Code: 05 55 9a 15 01 01 e8 9d aa c8 ff 0f 0b c3 80 3d 45 9a 15 01 00 75 ce 48 c7 c7 00 9c 62 b3 c6 08
| RSP: 0018:
ffffb524c1b9bc70 EFLAGS:
00010282
| RAX:
0000000000000000 RBX:
ffff9e9da1f71390 RCX:
0000000000000000
| RDX:
ffff9e9dbbd27618 RSI:
ffff9e9dbbd18798 RDI:
ffff9e9dbbd18798
| RBP:
0000000000000000 R08:
000000000000095f R09:
0000000000000039
| R10:
0000000000000000 R11:
ffffb524c1b9bb20 R12:
ffff9e9da1e8c700
| R13:
ffffffffb25ee8b0 R14:
0000000000000000 R15:
ffff9e9da1e8c700
| FS:
00007f3b87d26700(0000) GS:
ffff9e9dbbd00000(0000) knlGS:
0000000000000000
| CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
| CR2:
00007fc16909c000 CR3:
000000012df9c000 CR4:
00000000000006e0
| DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
| DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
| Call Trace:
| kobject_get+0x5c/0x60
| cdev_get+0x2b/0x60
| chrdev_open+0x55/0x220
| ? cdev_put.part.3+0x20/0x20
| do_dentry_open+0x13a/0x390
| path_openat+0x2c8/0x1470
| do_filp_open+0x93/0x100
| ? selinux_file_ioctl+0x17f/0x220
| do_sys_open+0x186/0x220
| do_syscall_64+0x48/0x150
| entry_SYSCALL_64_after_hwframe+0x44/0xa9
| RIP: 0033:0x7f3b87efcd0e
| Code: 89 54 24 08 e8 a3 f4 ff ff 8b 74 24 0c 48 8b 3c 24 41 89 c0 44 8b 54 24 08 b8 01 01 00 00 89 f4
| RSP: 002b:
00007f3b87d259f0 EFLAGS:
00000293 ORIG_RAX:
0000000000000101
| RAX:
ffffffffffffffda RBX:
0000000000000000 RCX:
00007f3b87efcd0e
| RDX:
0000000000000000 RSI:
00007f3b87d25a80 RDI:
00000000ffffff9c
| RBP:
00007f3b87d25e90 R08:
0000000000000000 R09:
0000000000000000
| R10:
0000000000000000 R11:
0000000000000293 R12:
00007ffe188f504e
| R13:
00007ffe188f504f R14:
00007f3b87d26700 R15:
0000000000000000
| ---[ end trace
24f53ca58db8180a ]---
Since 'cdev_get()' can already fail to obtain a reference, simply move
it over to use 'kobject_get_unless_zero()' instead of 'kobject_get()',
which will cause the racing thread to return -ENXIO if the initialising
thread fails unexpectedly.
Cc: Hillf Danton <hdanton@sina.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Reported-by: syzbot+82defefbbd8527e1c2cb@syzkaller.appspotmail.com
Signed-off-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20191219120203.32691-1-will@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Jan Kara [Thu, 23 Mar 2017 00:37:01 +0000 (01:37 +0100)]
kobject: Export kobject_get_unless_zero()
commit
c70c176ff8c3ff0ac6ef9a831cd591ea9a66bd1a upstream.
Make the function available for outside use and fortify it against NULL
kobject.
CC: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Kaitao Cheng [Tue, 31 Dec 2019 13:35:30 +0000 (05:35 -0800)]
kernel/trace: Fix do not unregister tracepoints when register sched_migrate_task fail
commit
50f9ad607ea891a9308e67b81f774c71736d1098 upstream.
In the function, if register_trace_sched_migrate_task() returns error,
sched_switch/sched_wakeup_new/sched_wakeup won't unregister. That is
why fail_deprobe_sched_switch was added.
Link: http://lkml.kernel.org/r/20191231133530.2794-1-pilgrimtao@gmail.com
Fixes: 478142c39c8c2 ("tracing: do not grab lock in wakeup latency function tracing")
Signed-off-by: Kaitao Cheng <pilgrimtao@gmail.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Michael Straube [Sat, 28 Dec 2019 14:37:25 +0000 (15:37 +0100)]
staging: rtl8188eu: Add device code for TP-Link TL-WN727N v5.21
commit
58dcc5bf4030cab548d5c98cd4cd3632a5444d5a upstream.
This device was added to the stand-alone driver on github.
Add it to the staging driver as well.
Link: https://github.com/lwfinger/rtl8188eu/commit/b9b537aa25a8
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20191228143725.24455-1-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Wen Yang [Fri, 3 Jan 2020 03:02:48 +0000 (11:02 +0800)]
ftrace: Avoid potential division by zero in function profiler
commit
e31f7939c1c27faa5d0e3f14519eaf7c89e8a69d upstream.
The ftrace_profile->counter is unsigned long and
do_div truncates it to 32 bits, which means it can test
non-zero and be truncated to zero for division.
Fix this issue by using div64_ul() instead.
Link: http://lkml.kernel.org/r/20200103030248.14516-1-wenyang@linux.alibaba.com
Fixes: e330b3bcd8319 ("tracing: Show sample std dev in function profiling")
Fixes: 34886c8bc590f ("tracing: add average time in function to function profiler")
Signed-off-by: Wen Yang <wenyang@linux.alibaba.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
[bwh: Backported to 3.16: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Steven Rostedt (VMware) [Fri, 3 Jan 2020 03:02:41 +0000 (22:02 -0500)]
tracing: Have stack tracer compile when MCOUNT_INSN_SIZE is not defined
commit
b8299d362d0837ae39e87e9019ebe6b736e0f035 upstream.
On some archs with some configurations, MCOUNT_INSN_SIZE is not defined, and
this makes the stack tracer fail to compile. Just define it to zero in this
case.
Link: https://lore.kernel.org/r/202001020219.zvE3vsty%lkp@intel.com
Fixes: 4df297129f622 ("tracing: Remove most or all of stack tracer stack size from stack_max_size")
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Hangbin Liu [Thu, 2 Jan 2020 09:23:45 +0000 (17:23 +0800)]
vxlan: fix tos value before xmit
commit
71130f29979c7c7956b040673e6b9d5643003176 upstream.
Before ip_tunnel_ecn_encap() and udp_tunnel_xmit_skb() we should filter
tos value by RT_TOS() instead of using config tos directly.
vxlan_get_route() would filter the tos to fl4.flowi4_tos but we didn't
return it back, as geneve_get_v4_rt() did. So we have to use RT_TOS()
directly in function ip_tunnel_ecn_encap().
Fixes: 206aaafcd279 ("VXLAN: Use IP Tunnels tunnel ENC encap API")
Fixes: 1400615d64cf ("vxlan: allow setting ipv6 traffic class")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Pengcheng Yang [Mon, 30 Dec 2019 09:54:41 +0000 (17:54 +0800)]
tcp: fix "old stuff" D-SACK causing SACK to be treated as D-SACK
commit
c9655008e7845bcfdaac10a1ed8554ec167aea88 upstream.
When we receive a D-SACK, where the sequence number satisfies:
undo_marker <= start_seq < end_seq <= prior_snd_una
we consider this is a valid D-SACK and tcp_is_sackblock_valid()
returns true, then this D-SACK is discarded as "old stuff",
but the variable first_sack_index is not marked as negative
in tcp_sacktag_write_queue().
If this D-SACK also carries a SACK that needs to be processed
(for example, the previous SACK segment was lost), this SACK
will be treated as a D-SACK in the following processing of
tcp_sacktag_write_queue(), which will eventually lead to
incorrect updates of undo_retrans and reordering.
Fixes: fd6dad616d4f ("[TCP]: Earlier SACK block verification & simplify access to them")
Signed-off-by: Pengcheng Yang <yangpc@wangsu.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Florian Faber [Thu, 26 Dec 2019 18:51:24 +0000 (19:51 +0100)]
can: mscan: mscan_rx_poll(): fix rx path lockup when returning from polling to irq mode
commit
2d77bd61a2927be8f4e00d9478fe6996c47e8d45 upstream.
Under load, the RX side of the mscan driver can get stuck while TX still
works. Restarting the interface locks up the system. This behaviour
could be reproduced reliably on a MPC5121e based system.
The patch fixes the return value of the NAPI polling function (should be
the number of processed packets, not constant 1) and the condition under
which IRQs are enabled again after polling is finished.
With this patch, no more lockups were observed over a test period of ten
days.
Fixes: afa17a500a36 ("net/can: add driver for mscan family & mpc52xx_mscan")
Signed-off-by: Florian Faber <faber@faberman.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Johan Hovold [Tue, 10 Dec 2019 11:32:31 +0000 (12:32 +0100)]
can: gs_usb: gs_usb_probe(): use descriptors of current altsetting
commit
2f361cd9474ab2c4ab9ac8db20faf81e66c6279b upstream.
Make sure to always use the descriptors of the current alternate setting
to avoid future issues when accessing fields that may differ between
settings.
Signed-off-by: Johan Hovold <johan@kernel.org>
Fixes: d08e973a77d1 ("can: gs_usb: Added support for the GS_USB CAN devices")
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Paul Cercueil [Mon, 16 Dec 2019 16:18:43 +0000 (10:18 -0600)]
usb: musb: dma: Correct parameter passed to IRQ handler
commit
c80d0f4426c7fdc7efd6ae8d8b021dcfc89b4254 upstream.
The IRQ handler was passed a pointer to a struct dma_controller, but the
argument was then casted to a pointer to a struct musb_dma_controller.
Fixes: 427c4f333474 ("usb: struct device - replace bus_id with dev_name(), dev_set_name()")
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Tested-by: Artur Rojek <contact@artur-rojek.eu>
Signed-off-by: Bin Liu <b-liu@ti.com>
Link: https://lore.kernel.org/r/20191216161844.772-2-b-liu@ti.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Johan Hovold [Mon, 3 Feb 2020 15:38:29 +0000 (16:38 +0100)]
USB: quirks: blacklist duplicate ep on Sound Devices USBPre2
commit
bdd1b147b8026df0e4260b387026b251d888ed01 upstream.
This device has a broken vendor-specific altsetting for interface 1,
where endpoint 0x85 is declared as an isochronous endpoint despite being
used by interface 2 for audio capture.
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 239 Miscellaneous Device
bDeviceSubClass 2
bDeviceProtocol 1 Interface Association
bMaxPacketSize0 64
idVendor 0x0926
idProduct 0x0202
bcdDevice 1.00
iManufacturer 1 Sound Devices
iProduct 2 USBPre2
iSerial 3 [...]
bNumConfigurations 1
[...]
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 3
bNumEndpoints 2
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x85 EP 5 IN
bmAttributes 5
Transfer Type Isochronous
Synch Type Asynchronous
Usage Type Data
wMaxPacketSize 0x0126 1x 294 bytes
bInterval 1
[...]
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 2
bAlternateSetting 1
bNumEndpoints 1
bInterfaceClass 1 Audio
bInterfaceSubClass 2 Streaming
bInterfaceProtocol 0
iInterface 0
AudioStreaming Interface Descriptor:
bLength 7
bDescriptorType 36
bDescriptorSubtype 1 (AS_GENERAL)
bTerminalLink 4
bDelay 1 frames
wFormatTag 0x0001 PCM
AudioStreaming Interface Descriptor:
bLength 26
bDescriptorType 36
bDescriptorSubtype 2 (FORMAT_TYPE)
bFormatType 1 (FORMAT_TYPE_I)
bNrChannels 2
bSubframeSize 2
bBitResolution 16
bSamFreqType 6 Discrete
tSamFreq[ 0] 8000
tSamFreq[ 1] 16000
tSamFreq[ 2] 24000
tSamFreq[ 3] 32000
tSamFreq[ 4] 44100
tSamFreq[ 5] 48000
Endpoint Descriptor:
bLength 9
bDescriptorType 5
bEndpointAddress 0x85 EP 5 IN
bmAttributes 5
Transfer Type Isochronous
Synch Type Asynchronous
Usage Type Data
wMaxPacketSize 0x0126 1x 294 bytes
bInterval 4
bRefresh 0
bSynchAddress 0
AudioStreaming Endpoint Descriptor:
bLength 7
bDescriptorType 37
bDescriptorSubtype 1 (EP_GENERAL)
bmAttributes 0x01
Sampling Frequency
bLockDelayUnits 2 Decoded PCM samples
wLockDelay 0x0000
Since commit
3e4f8e21c4f2 ("USB: core: fix check for duplicate
endpoints") USB core ignores any duplicate endpoints found during
descriptor parsing, but in this case we need to ignore the first
instance in order to avoid breaking the audio capture interface.
Fixes: 3e4f8e21c4f2 ("USB: core: fix check for duplicate endpoints")
Reported-by: edes <edes@gmx.net>
Tested-by: edes <edes@gmx.net>
Link: https://lore.kernel.org/r/20200201105829.5682c887@acme7.acmenet
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20200203153830.26394-3-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Johan Hovold [Mon, 3 Feb 2020 15:38:28 +0000 (16:38 +0100)]
USB: core: add endpoint-blacklist quirk
commit
73f8bda9b5dc1c69df2bc55c0cbb24461a6391a9 upstream.
Add a new device quirk that can be used to blacklist endpoints.
Since commit
3e4f8e21c4f2 ("USB: core: fix check for duplicate
endpoints") USB core ignores any duplicate endpoints found during
descriptor parsing.
In order to handle devices where the first interfaces with duplicate
endpoints are the ones that should have their endpoints ignored, we need
to add a blacklist.
Tested-by: edes <edes@gmx.net>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20200203153830.26394-2-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[bwh: Backported to 3.16: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Johan Hovold [Thu, 19 Dec 2019 16:10:16 +0000 (17:10 +0100)]
USB: core: fix check for duplicate endpoints
commit
3e4f8e21c4f27bcf30a48486b9dcc269512b79ff upstream.
Amend the endpoint-descriptor sanity checks to detect all duplicate
endpoint addresses in a configuration.
Commit
0a8fd1346254 ("USB: fix problems with duplicate endpoint
addresses") added a check for duplicate endpoint addresses within a
single alternate setting, but did not look for duplicate addresses in
other interfaces.
The current check would also not detect all duplicate addresses when one
endpoint is as a (bi-directional) control endpoint.
This specifically avoids overwriting the endpoint entries in struct
usb_device when enabling a duplicate endpoint, something which could
potentially lead to crashes or leaks, for example, when endpoints are
later disabled.
Signed-off-by: Johan Hovold <johan@kernel.org>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20191219161016.6695-1-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Sudip Mukherjee [Fri, 27 Dec 2019 17:44:34 +0000 (17:44 +0000)]
tty: always relink the port
commit
273f632912f1b24b642ba5b7eb5022e43a72f3b5 upstream.
If the serial device is disconnected and reconnected, it re-enumerates
properly but does not link it. fwiw, linking means just saving the port
index, so allow it always as there is no harm in saving the same value
again even if it tries to relink with the same port.
Fixes: fb2b90014d78 ("tty: link tty and port before configuring it as console")
Reported-by: Kenneth R. Crudup <kenny@panix.com>
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Link: https://lore.kernel.org/r/20191227174434.12057-1-sudipm.mukherjee@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Florian Westphal [Fri, 27 Dec 2019 00:33:10 +0000 (01:33 +0100)]
netfilter: arp_tables: init netns pointer in xt_tgchk_param struct
commit
1b789577f655060d98d20ed0c6f9fbd469d6ba63 upstream.
We get crash when the targets checkentry function tries to make
use of the network namespace pointer for arptables.
When the net pointer got added back in 2010, only ip/ip6/ebtables were
changed to initialize it, so arptables has this set to NULL.
This isn't a problem for normal arptables because no existing
arptables target has a checkentry function that makes use of par->net.
However, direct users of the setsockopt interface can provide any
target they want as long as its registered for ARP or UNPSEC protocols.
syzkaller managed to send a semi-valid arptables rule for RATEEST target
which is enough to trigger NULL deref:
kasan: GPF could be caused by NULL-ptr deref or user memory access
general protection fault: 0000 [#1] PREEMPT SMP KASAN
RIP: xt_rateest_tg_checkentry+0x11d/0xb40 net/netfilter/xt_RATEEST.c:109
[..]
xt_check_target+0x283/0x690 net/netfilter/x_tables.c:1019
check_target net/ipv4/netfilter/arp_tables.c:399 [inline]
find_check_entry net/ipv4/netfilter/arp_tables.c:422 [inline]
translate_table+0x1005/0x1d70 net/ipv4/netfilter/arp_tables.c:572
do_replace net/ipv4/netfilter/arp_tables.c:977 [inline]
do_arpt_set_ctl+0x310/0x640 net/ipv4/netfilter/arp_tables.c:1456
Fixes: add67461240c1d ("netfilter: add struct net * to target parameters")
Reported-by: syzbot+d7358a458d8a81aee898@syzkaller.appspotmail.com
Signed-off-by: Florian Westphal <fw@strlen.de>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
[bwh: Backported to 3.16: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Amir Goldstein [Sun, 22 Dec 2019 18:45:28 +0000 (20:45 +0200)]
locks: print unsigned ino in /proc/locks
commit
98ca480a8f22fdbd768e3dad07024c8d4856576c upstream.
An ino is unsigned, so display it as such in /proc/locks.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
[bwh: Backported to 3.16: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Takashi Iwai [Wed, 18 Dec 2019 19:26:06 +0000 (20:26 +0100)]
ALSA: ice1724: Fix sleep-in-atomic in Infrasonic Quartet support code
commit
0aec96f5897ac16ad9945f531b4bef9a2edd2ebd upstream.
Jia-Ju Bai reported a possible sleep-in-atomic scenario in the ice1724
driver with Infrasonic Quartet support code: namely, ice->set_rate
callback gets called inside ice->reg_lock spinlock, while the callback
in quartet.c holds ice->gpio_mutex.
This patch fixes the invalid call: it simply moves the calls of
ice->set_rate and ice->set_mclk callbacks outside the spinlock.
Reported-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Link: https://lore.kernel.org/r/5d43135e-73b9-a46a-2155-9e91d0dcdf83@gmail.com
Link: https://lore.kernel.org/r/20191218192606.12866-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Ard Biesheuvel [Tue, 24 Dec 2019 13:29:09 +0000 (14:29 +0100)]
x86/efistub: Disable paging at mixed mode entry
commit
4911ee401b7ceff8f38e0ac597cbf503d71e690c upstream.
The EFI mixed mode entry code goes through the ordinary startup_32()
routine before jumping into the kernel's EFI boot code in 64-bit
mode. The 32-bit startup code must be entered with paging disabled,
but this is not documented as a requirement for the EFI handover
protocol, and so we should disable paging explicitly when entering
the kernel from 32-bit EFI firmware.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Cc: Arvind Sankar <nivedita@alum.mit.edu>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Link: https://lkml.kernel.org/r/20191224132909.102540-4-ardb@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Russell King [Thu, 19 Dec 2019 23:24:47 +0000 (23:24 +0000)]
mod_devicetable: fix PHY module format
commit
d2ed49cf6c13e379c5819aa5ac20e1f9674ebc89 upstream.
When a PHY is probed, if the top bit is set, we end up requesting a
module with the string "mdio:-
10101110000000100101000101010001" -
the top bit is printed to a signed -1 value. This leads to the module
not being loaded.
Fix the module format string and the macro generating the values for
it to ensure that we only print unsigned types and the top bit is
always 0/1. We correctly end up with
"mdio:
10101110000000100101000101010001".
Fixes: 8626d3b43280 ("phylib: Support phy module autoloading")
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Hans de Goede [Tue, 17 Dec 2019 19:06:04 +0000 (20:06 +0100)]
platform/x86: hp-wmi: Make buffer for HPWMI_FEATURE2_QUERY 128 bytes
commit
133b2acee3871ae6bf123b8fe34be14464aa3d2c upstream.
At least on the HP Envy x360 15-cp0xxx model the WMI interface
for HPWMI_FEATURE2_QUERY requires an outsize of at least 128 bytes,
otherwise it fails with an error code 5 (HPWMI_RET_INVALID_PARAMETERS):
Dec 06 00:59:38 kernel: hp_wmi: query 0xd returned error 0x5
We do not care about the contents of the buffer, we just want to know
if the HPWMI_FEATURE2_QUERY command is supported.
This commits bumps the buffer size, fixing the error.
Fixes: 8a1513b4932 ("hp-wmi: limit hotkey enable")
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1520703
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
[bwh: Backported to 3.16: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Florian Westphal [Sun, 15 Dec 2019 02:49:25 +0000 (03:49 +0100)]
netfilter: ebtables: compat: reject all padding in matches/watchers
commit
e608f631f0ba5f1fc5ee2e260a3a35d13107cbfe upstream.
syzbot reported following splat:
BUG: KASAN: vmalloc-out-of-bounds in size_entry_mwt net/bridge/netfilter/ebtables.c:2063 [inline]
BUG: KASAN: vmalloc-out-of-bounds in compat_copy_entries+0x128b/0x1380 net/bridge/netfilter/ebtables.c:2155
Read of size 4 at addr
ffffc900004461f4 by task syz-executor267/7937
CPU: 1 PID: 7937 Comm: syz-executor267 Not tainted 5.5.0-rc1-syzkaller #0
size_entry_mwt net/bridge/netfilter/ebtables.c:2063 [inline]
compat_copy_entries+0x128b/0x1380 net/bridge/netfilter/ebtables.c:2155
compat_do_replace+0x344/0x720 net/bridge/netfilter/ebtables.c:2249
compat_do_ebt_set_ctl+0x22f/0x27e net/bridge/netfilter/ebtables.c:2333
[..]
Because padding isn't considered during computation of ->buf_user_offset,
"total" is decremented by fewer bytes than it should.
Therefore, the first part of
if (*total < sizeof(*entry) || entry->next_offset < sizeof(*entry))
will pass, -- it should not have. This causes oob access:
entry->next_offset is past the vmalloced size.
Reject padding and check that computed user offset (sum of ebt_entry
structure plus all individual matches/watchers/targets) is same
value that userspace gave us as the offset of the next entry.
Reported-by: syzbot+f68108fed972453a0ad4@syzkaller.appspotmail.com
Fixes: 81e675c227ec ("netfilter: ebtables: add CONFIG_COMPAT support")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Florian Westphal [Mon, 19 Feb 2018 00:24:53 +0000 (01:24 +0100)]
netfilter: ebtables: convert BUG_ONs to WARN_ONs
commit
fc6a5d0601c5ac1d02f283a46f60b87b2033e5ca upstream.
All of these conditions are not fatal and should have
been WARN_ONs from the get-go.
Convert them to WARN_ONs and bail out.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Jose Abreu [Wed, 18 Dec 2019 10:17:42 +0000 (11:17 +0100)]
net: stmmac: Enable 16KB buffer size
commit
b2f3a481c4cd62f78391b836b64c0a6e72b503d2 upstream.
XGMAC supports maximum MTU that can go to 16KB. Lets add this check in
the calculation of RX buffer size.
Fixes: 7ac6653a085b ("stmmac: Move the STMicroelectronics driver")
Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Jose Abreu [Wed, 18 Dec 2019 10:17:41 +0000 (11:17 +0100)]
net: stmmac: 16KB buffer must be 16 byte aligned
commit
8605131747e7e1fd8f6c9f97a00287aae2b2c640 upstream.
The 16KB RX Buffer must also be 16 byte aligned. Fix it.
Fixes: 7ac6653a085b ("stmmac: Move the STMicroelectronics driver")
Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Jim Mattson [Sat, 14 Dec 2019 00:15:15 +0000 (16:15 -0800)]
kvm: x86: Host feature SSBD doesn't imply guest feature SPEC_CTRL_SSBD
commit
396d2e878f92ec108e4293f1c77ea3bc90b414ff upstream.
The host reports support for the synthetic feature X86_FEATURE_SSBD
when any of the three following hardware features are set:
CPUID.(EAX=7,ECX=0):EDX.SSBD[bit 31]
CPUID.80000008H:EBX.AMD_SSBD[bit 24]
CPUID.80000008H:EBX.VIRT_SSBD[bit 25]
Either of the first two hardware features implies the existence of the
IA32_SPEC_CTRL MSR, but CPUID.80000008H:EBX.VIRT_SSBD[bit 25] does
not. Therefore, CPUID.(EAX=7,ECX=0):EDX.SSBD[bit 31] should only be
set in the guest if CPUID.(EAX=7,ECX=0):EDX.SSBD[bit 31] or
CPUID.80000008H:EBX.AMD_SSBD[bit 24] is set on the host.
Fixes: 0c54914d0c52a ("KVM: x86: use Intel speculation bugs and features as derived in generic x86 code")
Signed-off-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Jacob Xu <jacobhxu@google.com>
Reviewed-by: Peter Shier <pshier@google.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Reported-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
[bwh: Backported to 3.16: adjust indentation]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Suwan Kim [Fri, 13 Dec 2019 02:30:55 +0000 (11:30 +0900)]
usbip: Fix error path of vhci_recv_ret_submit()
commit
aabb5b833872524eaf28f52187e5987984982264 upstream.
If a transaction error happens in vhci_recv_ret_submit(), event
handler closes connection and changes port status to kick hub_event.
Then hub tries to flush the endpoint URBs, but that causes infinite
loop between usb_hub_flush_endpoint() and vhci_urb_dequeue() because
"vhci_priv" in vhci_urb_dequeue() was already released by
vhci_recv_ret_submit() before a transmission error occurred. Thus,
vhci_urb_dequeue() terminates early and usb_hub_flush_endpoint()
continuously calls vhci_urb_dequeue().
The root cause of this issue is that vhci_recv_ret_submit()
terminates early without giving back URB when transaction error
occurs in vhci_recv_ret_submit(). That causes the error URB to still
be linked at endpoint list without “vhci_priv".
So, in the case of transaction error in vhci_recv_ret_submit(),
unlink URB from the endpoint, insert proper error code in
urb->status and give back URB.
Reported-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Tested-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Signed-off-by: Suwan Kim <suwan.kim027@gmail.com>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20191213023055.19933-3-suwan.kim027@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[bwh: Backported to 3.16: adjust filename]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Erkka Talvitie [Wed, 11 Dec 2019 08:08:39 +0000 (10:08 +0200)]
USB: EHCI: Do not return -EPIPE when hub is disconnected
commit
64cc3f12d1c7dd054a215bc1ff9cc2abcfe35832 upstream.
When disconnecting a USB hub that has some child device(s) connected to it
(such as a USB mouse), then the stack tries to clear halt and
reset device(s) which are _already_ physically disconnected.
The issue has been reproduced with:
CPU: IMX6D5EYM10AD or MCIMX6D5EYM10AE.
SW: U-Boot 2019.07 and kernel 4.19.40.
CPU: HP Proliant Microserver Gen8.
SW: Linux version 4.2.3-300.fc23.x86_64
In this situation there will be error bit for MMF active yet the
CERR equals EHCI_TUNE_CERR + halt. Existing implementation
interprets this as a stall [1] (chapter 8.4.5).
The possible conditions when the MMF will be active + halt
can be found from [2] (Table 4-13).
Fix for the issue is to check whether MMF is active and PID Code is
IN before checking for the stall. If these conditions are true then
it is not a stall.
What happens after the fix is that when disconnecting a hub with
attached device(s) the situation is not interpret as a stall.
[1] [https://www.usb.org/document-library/usb-20-specification, usb_20.pdf]
[2] [https://www.intel.com/content/dam/www/public/us/en/documents/
technical-specifications/ehci-specification-for-usb.pdf]
Signed-off-by: Erkka Talvitie <erkka.talvitie@vincit.fi>
Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/ef70941d5f349767f19c0ed26b0dd9eed8ad81bb.1576050523.git.erkka.talvitie@vincit.fi
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Sudip Mukherjee [Thu, 12 Dec 2019 13:16:02 +0000 (13:16 +0000)]
tty: link tty and port before configuring it as console
commit
fb2b90014d782d80d7ebf663e50f96d8c507a73c upstream.
There seems to be a race condition in tty drivers and I could see on
many boot cycles a NULL pointer dereference as tty_init_dev() tries to
do 'tty->port->itty = tty' even though tty->port is NULL.
'tty->port' will be set by the driver and if the driver has not yet done
it before we open the tty device we can get to this situation. By adding
some extra debug prints, I noticed that:
6.650130: uart_add_one_port
6.663849: register_console
6.664846: tty_open
6.674391: tty_init_dev
6.675456: tty_port_link_device
uart_add_one_port() registers the console, as soon as it registers, the
userspace tries to use it and that leads to tty_open() but
uart_add_one_port() has not yet done tty_port_link_device() and so
tty->port is not yet configured when control reaches tty_init_dev().
Further look into the code and tty_port_link_device() is done by
uart_add_one_port(). After registering the console uart_add_one_port()
will call tty_port_register_device_attr_serdev() and
tty_port_link_device() is called from this.
Call add tty_port_link_device() before uart_configure_port() is done and
add a check in tty_port_link_device() so that it only links the port if
it has not been done yet.
Suggested-by: Jiri Slaby <jslaby@suse.com>
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Link: https://lore.kernel.org/r/20191212131602.29504-1-sudipm.mukherjee@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Shengjiu Wang [Wed, 11 Dec 2019 11:57:22 +0000 (19:57 +0800)]
ASoC: wm8962: fix lambda value
commit
556672d75ff486e0b6786056da624131679e0576 upstream.
According to user manual, it is required that FLL_LAMBDA > 0
in all cases (Integer and Franctional modes).
Fixes: 9a76f1ff6e29 ("ASoC: Add initial WM8962 CODEC driver")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/1576065442-19763-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Takashi Iwai [Fri, 13 Dec 2019 08:51:10 +0000 (09:51 +0100)]
ALSA: hda/ca0132 - Avoid endless loop
commit
cb04fc3b6b076f67d228a0b7d096c69ad486c09c upstream.
Introduce a timeout to dspio_clear_response_queue() so that it won't
be caught in an endless loop even if the hardware doesn't respond
properly.
Fixes: a73d511c4867 ("ALSA: hda/ca0132: Add unsol handler for DSP and jack detection")
Link: https://lore.kernel.org/r/20191213085111.22855-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Takashi Iwai [Wed, 11 Dec 2019 15:57:42 +0000 (16:57 +0100)]
ALSA: pcm: Avoid possible info leaks from PCM stream buffers
commit
add9d56d7b3781532208afbff5509d7382fb6efe upstream.
The current PCM code doesn't initialize explicitly the buffers
allocated for PCM streams, hence it might leak some uninitialized
kernel data or previous stream contents by mmapping or reading the
buffer before actually starting the stream.
Since this is a common problem, this patch simply adds the clearance
of the buffer data at hw_params callback. Although this does only
zero-clear no matter which format is used, which doesn't mean the
silence for some formats, but it should be OK because the intention is
just to clear the previous data on the buffer.
Reported-by: Lionel Koenig <lionel.koenig@gmail.com>
Link: https://lore.kernel.org/r/20191211155742.3213-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Eric Dumazet [Thu, 12 Dec 2019 20:55:29 +0000 (12:55 -0800)]
tcp: do not send empty skb from tcp_write_xmit()
commit
1f85e6267caca44b30c54711652b0726fadbb131 upstream.
Backport of commit
fdfc5c8594c2 ("tcp: remove empty skb from
write queue in error cases") in linux-4.14 stable triggered
various bugs. One of them has been fixed in commit
ba2ddb43f270
("tcp: Don't dequeue SYN/FIN-segments from write-queue"), but
we still have crashes in some occasions.
Root-cause is that when tcp_sendmsg() has allocated a fresh
skb and could not append a fragment before being blocked
in sk_stream_wait_memory(), tcp_write_xmit() might be called
and decide to send this fresh and empty skb.
Sending an empty packet is not only silly, it might have caused
many issues we had in the past with tp->packets_out being
out of sync.
Fixes: c65f7f00c587 ("[TCP]: Simplify SKB data portion allocation with NETIF_F_SG.")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Christoph Paasch <cpaasch@apple.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Cc: Jason Baron <jbaron@akamai.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
[bwh: Backported to 3.16: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Eric Dumazet [Thu, 12 Dec 2019 18:32:13 +0000 (10:32 -0800)]
6pack,mkiss: fix possible deadlock
commit
5c9934b6767b16ba60be22ec3cbd4379ad64170d upstream.
We got another syzbot report [1] that tells us we must use
write_lock_irq()/write_unlock_irq() to avoid possible deadlock.
[1]
WARNING: inconsistent lock state
5.5.0-rc1-syzkaller #0 Not tainted
--------------------------------
inconsistent {HARDIRQ-ON-W} -> {IN-HARDIRQ-R} usage.
syz-executor826/9605 [HC1[1]:SC0[0]:HE0:SE1] takes:
ffffffff8a128718 (disc_data_lock){+-..}, at: sp_get.isra.0+0x1d/0xf0 drivers/net/ppp/ppp_synctty.c:138
{HARDIRQ-ON-W} state was registered at:
lock_acquire+0x190/0x410 kernel/locking/lockdep.c:4485
__raw_write_lock_bh include/linux/rwlock_api_smp.h:203 [inline]
_raw_write_lock_bh+0x33/0x50 kernel/locking/spinlock.c:319
sixpack_close+0x1d/0x250 drivers/net/hamradio/6pack.c:657
tty_ldisc_close.isra.0+0x119/0x1a0 drivers/tty/tty_ldisc.c:489
tty_set_ldisc+0x230/0x6b0 drivers/tty/tty_ldisc.c:585
tiocsetd drivers/tty/tty_io.c:2337 [inline]
tty_ioctl+0xe8d/0x14f0 drivers/tty/tty_io.c:2597
vfs_ioctl fs/ioctl.c:47 [inline]
file_ioctl fs/ioctl.c:545 [inline]
do_vfs_ioctl+0x977/0x14e0 fs/ioctl.c:732
ksys_ioctl+0xab/0xd0 fs/ioctl.c:749
__do_sys_ioctl fs/ioctl.c:756 [inline]
__se_sys_ioctl fs/ioctl.c:754 [inline]
__x64_sys_ioctl+0x73/0xb0 fs/ioctl.c:754
do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294
entry_SYSCALL_64_after_hwframe+0x49/0xbe
irq event stamp: 3946
hardirqs last enabled at (3945): [<
ffffffff87c86e43>] __raw_spin_unlock_irq include/linux/spinlock_api_smp.h:168 [inline]
hardirqs last enabled at (3945): [<
ffffffff87c86e43>] _raw_spin_unlock_irq+0x23/0x80 kernel/locking/spinlock.c:199
hardirqs last disabled at (3946): [<
ffffffff8100675f>] trace_hardirqs_off_thunk+0x1a/0x1c arch/x86/entry/thunk_64.S:42
softirqs last enabled at (2658): [<
ffffffff86a8b4df>] spin_unlock_bh include/linux/spinlock.h:383 [inline]
softirqs last enabled at (2658): [<
ffffffff86a8b4df>] clusterip_netdev_event+0x46f/0x670 net/ipv4/netfilter/ipt_CLUSTERIP.c:222
softirqs last disabled at (2656): [<
ffffffff86a8b22b>] spin_lock_bh include/linux/spinlock.h:343 [inline]
softirqs last disabled at (2656): [<
ffffffff86a8b22b>] clusterip_netdev_event+0x1bb/0x670 net/ipv4/netfilter/ipt_CLUSTERIP.c:196
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(disc_data_lock);
<Interrupt>
lock(disc_data_lock);
*** DEADLOCK ***
5 locks held by syz-executor826/9605:
#0:
ffff8880a905e198 (&tty->legacy_mutex){+.+.}, at: tty_lock+0xc7/0x130 drivers/tty/tty_mutex.c:19
#1:
ffffffff899a56c0 (rcu_read_lock){....}, at: mutex_spin_on_owner+0x0/0x330 kernel/locking/mutex.c:413
#2:
ffff8880a496a2b0 (&(&i->lock)->rlock){-.-.}, at: spin_lock include/linux/spinlock.h:338 [inline]
#2:
ffff8880a496a2b0 (&(&i->lock)->rlock){-.-.}, at: serial8250_interrupt+0x2d/0x1a0 drivers/tty/serial/8250/8250_core.c:116
#3:
ffffffff8c104048 (&port_lock_key){-.-.}, at: serial8250_handle_irq.part.0+0x24/0x330 drivers/tty/serial/8250/8250_port.c:1823
#4:
ffff8880a905e090 (&tty->ldisc_sem){++++}, at: tty_ldisc_ref+0x22/0x90 drivers/tty/tty_ldisc.c:288
stack backtrace:
CPU: 1 PID: 9605 Comm: syz-executor826 Not tainted 5.5.0-rc1-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
<IRQ>
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x197/0x210 lib/dump_stack.c:118
print_usage_bug.cold+0x327/0x378 kernel/locking/lockdep.c:3101
valid_state kernel/locking/lockdep.c:3112 [inline]
mark_lock_irq kernel/locking/lockdep.c:3309 [inline]
mark_lock+0xbb4/0x1220 kernel/locking/lockdep.c:3666
mark_usage kernel/locking/lockdep.c:3554 [inline]
__lock_acquire+0x1e55/0x4a00 kernel/locking/lockdep.c:3909
lock_acquire+0x190/0x410 kernel/locking/lockdep.c:4485
__raw_read_lock include/linux/rwlock_api_smp.h:149 [inline]
_raw_read_lock+0x32/0x50 kernel/locking/spinlock.c:223
sp_get.isra.0+0x1d/0xf0 drivers/net/ppp/ppp_synctty.c:138
sixpack_write_wakeup+0x25/0x340 drivers/net/hamradio/6pack.c:402
tty_wakeup+0xe9/0x120 drivers/tty/tty_io.c:536
tty_port_default_wakeup+0x2b/0x40 drivers/tty/tty_port.c:50
tty_port_tty_wakeup+0x57/0x70 drivers/tty/tty_port.c:387
uart_write_wakeup+0x46/0x70 drivers/tty/serial/serial_core.c:104
serial8250_tx_chars+0x495/0xaf0 drivers/tty/serial/8250/8250_port.c:1761
serial8250_handle_irq.part.0+0x2a2/0x330 drivers/tty/serial/8250/8250_port.c:1834
serial8250_handle_irq drivers/tty/serial/8250/8250_port.c:1820 [inline]
serial8250_default_handle_irq+0xc0/0x150 drivers/tty/serial/8250/8250_port.c:1850
serial8250_interrupt+0xf1/0x1a0 drivers/tty/serial/8250/8250_core.c:126
__handle_irq_event_percpu+0x15d/0x970 kernel/irq/handle.c:149
handle_irq_event_percpu+0x74/0x160 kernel/irq/handle.c:189
handle_irq_event+0xa7/0x134 kernel/irq/handle.c:206
handle_edge_irq+0x25e/0x8d0 kernel/irq/chip.c:830
generic_handle_irq_desc include/linux/irqdesc.h:156 [inline]
do_IRQ+0xde/0x280 arch/x86/kernel/irq.c:250
common_interrupt+0xf/0xf arch/x86/entry/entry_64.S:607
</IRQ>
RIP: 0010:cpu_relax arch/x86/include/asm/processor.h:685 [inline]
RIP: 0010:mutex_spin_on_owner+0x247/0x330 kernel/locking/mutex.c:579
Code: c3 be 08 00 00 00 4c 89 e7 e8 e5 06 59 00 4c 89 e0 48 c1 e8 03 42 80 3c 38 00 0f 85 e1 00 00 00 49 8b 04 24 a8 01 75 96 f3 90 <e9> 2f fe ff ff 0f 0b e8 0d 19 09 00 84 c0 0f 85 ff fd ff ff 48 c7
RSP: 0018:
ffffc90001eafa20 EFLAGS:
00000246 ORIG_RAX:
ffffffffffffffd7
RAX:
0000000000000000 RBX:
ffff88809fd9e0c0 RCX:
1ffffffff13266dd
RDX:
0000000000000000 RSI:
0000000000000008 RDI:
0000000000000000
RBP:
ffffc90001eafa60 R08:
1ffff11013d22898 R09:
ffffed1013d22899
R10:
ffffed1013d22898 R11:
ffff88809e9144c7 R12:
ffff8880a905e138
R13:
ffff88809e9144c0 R14:
0000000000000000 R15:
dffffc0000000000
mutex_optimistic_spin kernel/locking/mutex.c:673 [inline]
__mutex_lock_common kernel/locking/mutex.c:962 [inline]
__mutex_lock+0x32b/0x13c0 kernel/locking/mutex.c:1106
mutex_lock_nested+0x16/0x20 kernel/locking/mutex.c:1121
tty_lock+0xc7/0x130 drivers/tty/tty_mutex.c:19
tty_release+0xb5/0xe90 drivers/tty/tty_io.c:1665
__fput+0x2ff/0x890 fs/file_table.c:280
____fput+0x16/0x20 fs/file_table.c:313
task_work_run+0x145/0x1c0 kernel/task_work.c:113
exit_task_work include/linux/task_work.h:22 [inline]
do_exit+0x8e7/0x2ef0 kernel/exit.c:797
do_group_exit+0x135/0x360 kernel/exit.c:895
__do_sys_exit_group kernel/exit.c:906 [inline]
__se_sys_exit_group kernel/exit.c:904 [inline]
__x64_sys_exit_group+0x44/0x50 kernel/exit.c:904
do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294
entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x43fef8
Code: Bad RIP value.
RSP: 002b:
00007ffdb07d2338 EFLAGS:
00000246 ORIG_RAX:
00000000000000e7
RAX:
ffffffffffffffda RBX:
0000000000000000 RCX:
000000000043fef8
RDX:
0000000000000000 RSI:
000000000000003c RDI:
0000000000000000
RBP:
00000000004bf730 R08:
00000000000000e7 R09:
ffffffffffffffd0
R10:
00000000004002c8 R11:
0000000000000246 R12:
0000000000000001
R13:
00000000006d1180 R14:
0000000000000000 R15:
0000000000000000
Fixes: 6e4e2f811bad ("6pack,mkiss: fix lock inconsistency")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Christophe Leroy [Mon, 9 Dec 2019 06:19:08 +0000 (06:19 +0000)]
powerpc/irq: fix stack overflow verification
commit
099bc4812f09155da77eeb960a983470249c9ce1 upstream.
Before commit
0366a1c70b89 ("powerpc/irq: Run softirqs off the top of
the irq stack"), check_stack_overflow() was called by do_IRQ(), before
switching to the irq stack.
In that commit, do_IRQ() was renamed __do_irq(), and is now executing
on the irq stack, so check_stack_overflow() has just become almost
useless.
Move check_stack_overflow() call in do_IRQ() to do the check while
still on the current stack.
Fixes: 0366a1c70b89 ("powerpc/irq: Run softirqs off the top of the irq stack")
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/e033aa8116ab12b7ca9a9c75189ad0741e3b9b5f.1575872340.git.christophe.leroy@c-s.fr
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Jan Kara [Mon, 2 Dec 2019 17:02:13 +0000 (18:02 +0100)]
ext4: check for directory entries too close to block end
commit
109ba779d6cca2d519c5dd624a3276d03e21948e upstream.
ext4_check_dir_entry() currently does not catch a case when a directory
entry ends so close to the block end that the header of the next
directory entry would not fit in the remaining space. This can lead to
directory iteration code trying to access address beyond end of current
buffer head leading to oops.
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20191202170213.4761-3-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Josef Bacik [Fri, 10 Jan 2020 16:11:24 +0000 (11:11 -0500)]
btrfs: check rw_devices, not num_devices for balance
commit
b35cf1f0bf1f2b0b193093338414b9bd63b29015 upstream.
The fstest btrfs/154 reports
[ 8675.381709] BTRFS: Transaction aborted (error -28)
[ 8675.383302] WARNING: CPU: 1 PID: 31900 at fs/btrfs/block-group.c:2038 btrfs_create_pending_block_groups+0x1e0/0x1f0 [btrfs]
[ 8675.390925] CPU: 1 PID: 31900 Comm: btrfs Not tainted 5.5.0-rc6-default+ #935
[ 8675.392780] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
rel-1.12.0-59-gc9ba527-rebuilt.opensuse.org 04/01/2014
[ 8675.395452] RIP: 0010:btrfs_create_pending_block_groups+0x1e0/0x1f0 [btrfs]
[ 8675.402672] RSP: 0018:
ffffb2090888fb00 EFLAGS:
00010286
[ 8675.404413] RAX:
0000000000000000 RBX:
ffff92026dfa91c8 RCX:
0000000000000001
[ 8675.406609] RDX:
0000000000000000 RSI:
ffffffff8e100899 RDI:
ffffffff8e100971
[ 8675.408775] RBP:
ffff920247c61660 R08:
0000000000000000 R09:
0000000000000000
[ 8675.410978] R10:
0000000000000000 R11:
0000000000000000 R12:
00000000ffffffe4
[ 8675.412647] R13:
ffff92026db74000 R14:
ffff920247c616b8 R15:
ffff92026dfbc000
[ 8675.413994] FS:
00007fd5e57248c0(0000) GS:
ffff92027d800000(0000) knlGS:
0000000000000000
[ 8675.416146] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 8675.417833] CR2:
0000564aa51682d8 CR3:
000000006dcbc004 CR4:
0000000000160ee0
[ 8675.419801] Call Trace:
[ 8675.420742] btrfs_start_dirty_block_groups+0x355/0x480 [btrfs]
[ 8675.422600] btrfs_commit_transaction+0xc8/0xaf0 [btrfs]
[ 8675.424335] reset_balance_state+0x14a/0x190 [btrfs]
[ 8675.425824] btrfs_balance.cold+0xe7/0x154 [btrfs]
[ 8675.427313] ? kmem_cache_alloc_trace+0x235/0x2c0
[ 8675.428663] btrfs_ioctl_balance+0x298/0x350 [btrfs]
[ 8675.430285] btrfs_ioctl+0x466/0x2550 [btrfs]
[ 8675.431788] ? mem_cgroup_charge_statistics+0x51/0xf0
[ 8675.433487] ? mem_cgroup_commit_charge+0x56/0x400
[ 8675.435122] ? do_raw_spin_unlock+0x4b/0xc0
[ 8675.436618] ? _raw_spin_unlock+0x1f/0x30
[ 8675.438093] ? __handle_mm_fault+0x499/0x740
[ 8675.439619] ? do_vfs_ioctl+0x56e/0x770
[ 8675.441034] do_vfs_ioctl+0x56e/0x770
[ 8675.442411] ksys_ioctl+0x3a/0x70
[ 8675.443718] ? trace_hardirqs_off_thunk+0x1a/0x1c
[ 8675.445333] __x64_sys_ioctl+0x16/0x20
[ 8675.446705] do_syscall_64+0x50/0x210
[ 8675.448059] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 8675.479187] BTRFS: error (device vdb) in btrfs_create_pending_block_groups:2038: errno=-28 No space left
We now use btrfs_can_overcommit() to see if we can flip a block group
read only. Before this would fail because we weren't taking into
account the usable un-allocated space for allocating chunks. With my
patches we were allowed to do the balance, which is technically correct.
The test is trying to start balance on degraded mount. So now we're
trying to allocate a chunk and cannot because we want to allocate a
RAID1 chunk, but there's only 1 device that's available for usage. This
results in an ENOSPC.
But we shouldn't even be making it this far, we don't have enough
devices to restripe. The problem is we're using btrfs_num_devices(),
that also includes missing devices. That's not actually what we want, we
need to use rw_devices.
The chunk_mutex is not needed here, rw_devices changes only in device
add, remove or replace, all are excluded by EXCL_OP mechanism.
Fixes: e4d8ec0f65b9 ("Btrfs: implement online profile changing")
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ add stacktrace, update changelog, drop chunk_mutex ]
Signed-off-by: David Sterba <dsterba@suse.com>
[bwh: Backported to 3.16: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Josef Bacik [Wed, 18 Dec 2019 22:20:29 +0000 (17:20 -0500)]
btrfs: do not delete mismatched root refs
commit
423a716cd7be16fb08690760691befe3be97d3fc upstream.
btrfs_del_root_ref() will simply WARN_ON() if the ref doesn't match in
any way, and then continue to delete the reference. This shouldn't
happen, we have these values because there's more to the reference than
the original root and the sub root. If any of these checks fail, return
-ENOENT.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Lu Fengqi [Wed, 1 Aug 2018 03:32:31 +0000 (11:32 +0800)]
btrfs: Remove redundant btrfs_release_path from btrfs_unlink_subvol
commit
5b7d687ad5913a56b6a8788435d7a53990b4176d upstream.
Although it is safe to call this on already released paths with no locks
held or extent buffers, removing the redundant btrfs_release_path is
reasonable.
Signed-off-by: Lu Fengqi <lufq.fnst@cn.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[bwh: Backported to 3.16 as dependency of commit
d49d3287e74f
"btrfs: fix invalid removal of root ref"]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Filipe Manana [Wed, 11 Dec 2019 09:01:40 +0000 (09:01 +0000)]
Btrfs: fix infinite loop during nocow writeback due to race
commit
de7999afedff02c6631feab3ea726a0e8f8c3d40 upstream.
When starting writeback for a range that covers part of a preallocated
extent, due to a race with writeback for another range that also covers
another part of the same preallocated extent, we can end up in an infinite
loop.
Consider the following example where for inode 280 we have two dirty
ranges:
range A, from 294912 to 303103, 8192 bytes
range B, from 348160 to 438271, 90112 bytes
and we have the following file extent item layout for our inode:
leaf
38895616 gen 24544 total ptrs 29 free space 13820 owner 5
(...)
item 27 key (280 108 200704) itemoff 14598 itemsize 53
extent data disk bytenr 0 nr 0 type 1 (regular)
extent data offset 0 nr 94208 ram 94208
item 28 key (280 108 294912) itemoff 14545 itemsize 53
extent data disk bytenr
10433052672 nr 81920 type 2 (prealloc)
extent data offset 0 nr 81920 ram 81920
Then the following happens:
1) Writeback starts for range B (from 348160 to 438271), execution of
run_delalloc_nocow() starts;
2) The first iteration of run_delalloc_nocow()'s whil loop leaves us at
the extent item at slot 28, pointing to the prealloc extent item
covering the range from 294912 to 376831. This extent covers part of
our range;
3) An ordered extent is created against that extent, covering the file
range from 348160 to 376831 (28672 bytes);
4) We adjust 'cur_offset' to 376832 and move on to the next iteration of
the while loop;
5) The call to btrfs_lookup_file_extent() leaves us at the same leaf,
pointing to slot 29, 1 slot after the last item (the extent item
we processed in the previous iteration);
6) Because we are a slot beyond the last item, we call btrfs_next_leaf(),
which releases the search path before doing a another search for the
last key of the leaf (280 108 294912);
7) Right after btrfs_next_leaf() released the path, and before it did
another search for the last key of the leaf, writeback for the range
A (from 294912 to 303103) completes (it was previously started at
some point);
8) Upon completion of the ordered extent for range A, the prealloc extent
we previously found got split into two extent items, one covering the
range from 294912 to 303103 (8192 bytes), with a type of regular extent
(and no longer prealloc) and another covering the range from 303104 to
376831 (73728 bytes), with a type of prealloc and an offset of 8192
bytes. So our leaf now has the following layout:
leaf
38895616 gen 24544 total ptrs 31 free space 13664 owner 5
(...)
item 27 key (280 108 200704) itemoff 14598 itemsize 53
extent data disk bytenr 0 nr 0 type 1
extent data offset 0 nr 8192 ram 94208
item 28 key (280 108 208896) itemoff 14545 itemsize 53
extent data disk bytenr
10433142784 nr 86016 type 1
extent data offset 0 nr 86016 ram 86016
item 29 key (280 108 294912) itemoff 14492 itemsize 53
extent data disk bytenr
10433052672 nr 81920 type 1
extent data offset 0 nr 8192 ram 81920
item 30 key (280 108 303104) itemoff 14439 itemsize 53
extent data disk bytenr
10433052672 nr 81920 type 2
extent data offset 8192 nr 73728 ram 81920
9) After btrfs_next_leaf() returns, we have our path pointing to that same
leaf and at slot 30, since it has a key we didn't have before and it's
the first key greater then the key that was previously the last key of
the leaf (key (280 108 294912));
10) The extent item at slot 30 covers the range from 303104 to 376831
which is in our target range, so we process it, despite having already
created an ordered extent against this extent for the file range from
348160 to 376831. This is because we skip to the next extent item only
if its end is less than or equals to the start of our delalloc range,
and not less than or equals to the current offset ('cur_offset');
11) As a result we compute 'num_bytes' as:
num_bytes = min(end + 1, extent_end) - cur_offset;
= min(438271 + 1, 376832) - 376832 = 0
12) We then call create_io_em() for a 0 bytes range starting at offset
376832;
13) Then create_io_em() enters an infinite loop because its calls to
btrfs_drop_extent_cache() do nothing due to the 0 length range
passed to it. So no existing extent maps that cover the offset
376832 get removed, and therefore calls to add_extent_mapping()
return -EEXIST, resulting in an infinite loop. This loop from
create_io_em() is the following:
do {
btrfs_drop_extent_cache(BTRFS_I(inode), em->start,
em->start + em->len - 1, 0);
write_lock(&em_tree->lock);
ret = add_extent_mapping(em_tree, em, 1);
write_unlock(&em_tree->lock);
/*
* The caller has taken lock_extent(), who could race with us
* to add em?
*/
} while (ret == -EEXIST);
Also, each call to btrfs_drop_extent_cache() triggers a warning because
the start offset passed to it (376832) is smaller then the end offset
(376832 - 1) passed to it by -1, due to the 0 length:
[258532.052621] ------------[ cut here ]------------
[258532.052643] WARNING: CPU: 0 PID: 9987 at fs/btrfs/file.c:602 btrfs_drop_extent_cache+0x3f4/0x590 [btrfs]
(...)
[258532.052672] CPU: 0 PID: 9987 Comm: fsx Tainted: G W 5.4.0-rc7-btrfs-next-64 #1
[258532.052673] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
rel-1.12.0-0-ga698c8995f-prebuilt.qemu.org 04/01/2014
[258532.052691] RIP: 0010:btrfs_drop_extent_cache+0x3f4/0x590 [btrfs]
(...)
[258532.052695] RSP: 0018:
ffffb4be0153f860 EFLAGS:
00010287
[258532.052700] RAX:
ffff975b445ee360 RBX:
ffff975b44eb3e08 RCX:
0000000000000000
[258532.052700] RDX:
0000000000038fff RSI:
0000000000039000 RDI:
ffff975b445ee308
[258532.052700] RBP:
0000000000038fff R08:
0000000000000000 R09:
0000000000000001
[258532.052701] R10:
ffff975b513c5c10 R11:
00000000e3c0cfa9 R12:
0000000000039000
[258532.052703] R13:
ffff975b445ee360 R14:
00000000ffffffef R15:
ffff975b445ee308
[258532.052705] FS:
00007f86a821de80(0000) GS:
ffff975b76a00000(0000) knlGS:
0000000000000000
[258532.052707] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[258532.052708] CR2:
00007fdacf0f3ab4 CR3:
00000001f9d26002 CR4:
00000000003606f0
[258532.052712] DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
[258532.052717] DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
[258532.052717] Call Trace:
[258532.052718] ? preempt_schedule_common+0x32/0x70
[258532.052722] ? ___preempt_schedule+0x16/0x20
[258532.052741] create_io_em+0xff/0x180 [btrfs]
[258532.052767] run_delalloc_nocow+0x942/0xb10 [btrfs]
[258532.052791] btrfs_run_delalloc_range+0x30b/0x520 [btrfs]
[258532.052812] ? find_lock_delalloc_range+0x221/0x250 [btrfs]
[258532.052834] writepage_delalloc+0xe4/0x140 [btrfs]
[258532.052855] __extent_writepage+0x110/0x4e0 [btrfs]
[258532.052876] extent_write_cache_pages+0x21c/0x480 [btrfs]
[258532.052906] extent_writepages+0x52/0xb0 [btrfs]
[258532.052911] do_writepages+0x23/0x80
[258532.052915] __filemap_fdatawrite_range+0xd2/0x110
[258532.052938] btrfs_fdatawrite_range+0x1b/0x50 [btrfs]
[258532.052954] start_ordered_ops+0x57/0xa0 [btrfs]
[258532.052973] ? btrfs_sync_file+0x225/0x490 [btrfs]
[258532.052988] btrfs_sync_file+0x225/0x490 [btrfs]
[258532.052997] __x64_sys_msync+0x199/0x200
[258532.053004] do_syscall_64+0x5c/0x250
[258532.053007] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[258532.053010] RIP: 0033:0x7f86a7dfd760
(...)
[258532.053014] RSP: 002b:
00007ffd99af0368 EFLAGS:
00000246 ORIG_RAX:
000000000000001a
[258532.053016] RAX:
ffffffffffffffda RBX:
0000000000000ec9 RCX:
00007f86a7dfd760
[258532.053017] RDX:
0000000000000004 RSI:
000000000000836c RDI:
00007f86a8221000
[258532.053019] RBP:
0000000000021ec9 R08:
0000000000000003 R09:
00007f86a812037c
[258532.053020] R10:
0000000000000001 R11:
0000000000000246 R12:
00000000000074a3
[258532.053021] R13:
00007f86a8221000 R14:
000000000000836c R15:
0000000000000001
[258532.053032] irq event stamp:
1653450494
[258532.053035] hardirqs last enabled at (
1653450493): [<
ffffffff9dec69f9>] _raw_spin_unlock_irq+0x29/0x50
[258532.053037] hardirqs last disabled at (
1653450494): [<
ffffffff9d4048ea>] trace_hardirqs_off_thunk+0x1a/0x20
[258532.053039] softirqs last enabled at (
1653449852): [<
ffffffff9e200466>] __do_softirq+0x466/0x6bd
[258532.053042] softirqs last disabled at (
1653449845): [<
ffffffff9d4c8a0c>] irq_exit+0xec/0x120
[258532.053043] ---[ end trace
8476fce13d9ce20a ]---
Which results in flooding dmesg/syslog since btrfs_drop_extent_cache()
uses WARN_ON() and not WARN_ON_ONCE().
So fix this issue by changing run_delalloc_nocow()'s loop to move to the
next extent item when the current extent item ends at at offset less than
or equals to the current offset instead of the start offset.
Fixes: 80ff385665b7fc ("Btrfs: update nodatacow code v2")
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[bwh: Backported to 3.16: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Josef Bacik [Fri, 6 Dec 2019 14:37:18 +0000 (09:37 -0500)]
btrfs: do not leak reloc root if we fail to read the fs root
commit
ca1aa2818a53875cfdd175fb5e9a2984e997cce9 upstream.
If we fail to read the fs root corresponding with a reloc root we'll
just break out and free the reloc roots. But we remove our current
reloc_root from this list higher up, which means we'll leak this
reloc_root. Fix this by adding ourselves back to the reloc_roots list
so we are properly cleaned up.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Josef Bacik [Fri, 6 Dec 2019 14:37:17 +0000 (09:37 -0500)]
btrfs: skip log replay on orphaned roots
commit
9bc574de590510eff899c3ca8dbaf013566b5efe upstream.
My fsstress modifications coupled with generic/475 uncovered a failure
to mount and replay the log if we hit a orphaned root. We do not want
to replay the log for an orphan root, but it's completely legitimate to
have an orphaned root with a log attached. Fix this by simply skipping
replaying the log. We still need to pin it's root node so that we do
not overwrite it while replaying other logs, as we re-read the log root
at every stage of the replay.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[bwh: Backported to 3.16:
- Pass fs_info->extent_root, instead of fs_info, as first argument to
btrfs_pin_extent_for_log_replay()
- Adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Josef Bacik [Fri, 6 Dec 2019 16:39:00 +0000 (11:39 -0500)]
btrfs: handle ENOENT in btrfs_uuid_tree_iterate
commit
714cd3e8cba6841220dce9063a7388a81de03825 upstream.
If we get an -ENOENT back from btrfs_uuid_iter_rem when iterating the
uuid tree we'll just continue and do btrfs_next_item(). However we've
done a btrfs_release_path() at this point and no longer have a valid
path. So increment the key and go back and do a normal search.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Josef Bacik [Fri, 6 Dec 2019 14:37:15 +0000 (09:37 -0500)]
btrfs: abort transaction after failed inode updates in create_subvol
commit
c7e54b5102bf3614cadb9ca32d7be73bad6cecf0 upstream.
We can just abort the transaction here, and in fact do that for every
other failure in this function except these two cases.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[bwh: Backported to 3.16:
- Add root as second argument to btrfs_abort_transaction()
- Adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Filipe Manana [Fri, 6 Dec 2019 12:27:39 +0000 (12:27 +0000)]
Btrfs: fix removal logic of the tree mod log that leads to use-after-free issues
commit
6609fee8897ac475378388238456c84298bff802 upstream.
When a tree mod log user no longer needs to use the tree it calls
btrfs_put_tree_mod_seq() to remove itself from the list of users and
delete all no longer used elements of the tree's red black tree, which
should be all elements with a sequence number less then our equals to
the caller's sequence number. However the logic is broken because it
can delete and free elements from the red black tree that have a
sequence number greater then the caller's sequence number:
1) At a point in time we have sequence numbers 1, 2, 3 and 4 in the
tree mod log;
2) The task which got assigned the sequence number 1 calls
btrfs_put_tree_mod_seq();
3) Sequence number 1 is deleted from the list of sequence numbers;
4) The current minimum sequence number is computed to be the sequence
number 2;
5) A task using sequence number 2 is at tree_mod_log_rewind() and gets
a pointer to one of its elements from the red black tree through
a call to tree_mod_log_search();
6) The task with sequence number 1 iterates the red black tree of tree
modification elements and deletes (and frees) all elements with a
sequence number less then or equals to 2 (the computed minimum sequence
number) - it ends up only leaving elements with sequence numbers of 3
and 4;
7) The task with sequence number 2 now uses the pointer to its element,
already freed by the other task, at __tree_mod_log_rewind(), resulting
in a use-after-free issue. When CONFIG_DEBUG_PAGEALLOC=y it produces
a trace like the following:
[16804.546854] general protection fault: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC PTI
[16804.547451] CPU: 0 PID: 28257 Comm: pool Tainted: G W 5.4.0-rc8-btrfs-next-51 #1
[16804.548059] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
rel-1.12.0-0-ga698c8995f-prebuilt.qemu.org 04/01/2014
[16804.548666] RIP: 0010:rb_next+0x16/0x50
(...)
[16804.550581] RSP: 0018:
ffffb948418ef9b0 EFLAGS:
00010202
[16804.551227] RAX:
6b6b6b6b6b6b6b6b RBX:
ffff90e0247f6600 RCX:
6b6b6b6b6b6b6b6b
[16804.551873] RDX:
0000000000000000 RSI:
0000000000000000 RDI:
ffff90e0247f6600
[16804.552504] RBP:
ffff90dffe0d4688 R08:
0000000000000001 R09:
0000000000000000
[16804.553136] R10:
ffff90dffa4a0040 R11:
0000000000000000 R12:
000000000000002e
[16804.553768] R13:
ffff90e0247f6600 R14:
0000000000001663 R15:
ffff90dff77862b8
[16804.554399] FS:
00007f4b197ae700(0000) GS:
ffff90e036a00000(0000) knlGS:
0000000000000000
[16804.555039] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[16804.555683] CR2:
00007f4b10022000 CR3:
00000002060e2004 CR4:
00000000003606f0
[16804.556336] DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
[16804.556968] DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
[16804.557583] Call Trace:
[16804.558207] __tree_mod_log_rewind+0xbf/0x280 [btrfs]
[16804.558835] btrfs_search_old_slot+0x105/0xd00 [btrfs]
[16804.559468] resolve_indirect_refs+0x1eb/0xc70 [btrfs]
[16804.560087] ? free_extent_buffer.part.19+0x5a/0xc0 [btrfs]
[16804.560700] find_parent_nodes+0x388/0x1120 [btrfs]
[16804.561310] btrfs_check_shared+0x115/0x1c0 [btrfs]
[16804.561916] ? extent_fiemap+0x59d/0x6d0 [btrfs]
[16804.562518] extent_fiemap+0x59d/0x6d0 [btrfs]
[16804.563112] ? __might_fault+0x11/0x90
[16804.563706] do_vfs_ioctl+0x45a/0x700
[16804.564299] ksys_ioctl+0x70/0x80
[16804.564885] ? trace_hardirqs_off_thunk+0x1a/0x20
[16804.565461] __x64_sys_ioctl+0x16/0x20
[16804.566020] do_syscall_64+0x5c/0x250
[16804.566580] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[16804.567153] RIP: 0033:0x7f4b1ba2add7
(...)
[16804.568907] RSP: 002b:
00007f4b197adc88 EFLAGS:
00000246 ORIG_RAX:
0000000000000010
[16804.569513] RAX:
ffffffffffffffda RBX:
00007f4b100210d8 RCX:
00007f4b1ba2add7
[16804.570133] RDX:
00007f4b100210d8 RSI:
00000000c020660b RDI:
0000000000000003
[16804.570726] RBP:
000055de05a6cfe0 R08:
0000000000000000 R09:
00007f4b197add44
[16804.571314] R10:
0000000000000000 R11:
0000000000000246 R12:
00007f4b197add48
[16804.571905] R13:
00007f4b197add40 R14:
00007f4b100210d0 R15:
00007f4b197add50
(...)
[16804.575623] ---[ end trace
87317359aad4ba50 ]---
Fix this by making btrfs_put_tree_mod_seq() skip deletion of elements that
have a sequence number equals to the computed minimum sequence number, and
not just elements with a sequence number greater then that minimum.
Fixes: bd989ba359f2ac ("Btrfs: add tree modification log functions")
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[bwh: Backported to 3.16: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Josef Bacik [Tue, 19 Nov 2019 18:59:35 +0000 (13:59 -0500)]
btrfs: do not call synchronize_srcu() in inode_tree_del
commit
f72ff01df9cf5db25c76674cac16605992d15467 upstream.
Testing with the new fsstress uncovered a pretty nasty deadlock with
lookup and snapshot deletion.
Process A
unlink
-> final iput
-> inode_tree_del
-> synchronize_srcu(subvol_srcu)
Process B
btrfs_lookup <- srcu_read_lock() acquired here
-> btrfs_iget
-> find inode that has I_FREEING set
-> __wait_on_freeing_inode()
We're holding the srcu_read_lock() while doing the iget in order to make
sure our fs root doesn't go away, and then we are waiting for the inode
to finish freeing. However because the free'ing process is doing a
synchronize_srcu() we deadlock.
Fix this by dropping the synchronize_srcu() in inode_tree_del(). We
don't need people to stop accessing the fs root at this point, we're
only adding our empty root to the dead roots list.
A larger much more invasive fix is forthcoming to address how we deal
with fs roots, but this fixes the immediate problem.
Fixes: 76dda93c6ae2 ("Btrfs: add snapshot/subvolume destroy ioctl")
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[bwh: Backported to 3.16: No fs_info variable was used here]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Dmitry Torokhov [Sat, 7 Dec 2019 21:05:18 +0000 (13:05 -0800)]
HID: hid-input: clear unmapped usages
commit
4f3882177240a1f55e45a3d241d3121341bead78 upstream.
We should not be leaving half-mapped usages with potentially invalid
keycodes, as that may confuse hidinput_find_key() when the key is located
by index, which may end up feeding way too large keycode into the VT
keyboard handler and cause OOB write there:
BUG: KASAN: global-out-of-bounds in clear_bit include/asm-generic/bitops-instrumented.h:56 [inline]
BUG: KASAN: global-out-of-bounds in kbd_keycode drivers/tty/vt/keyboard.c:1411 [inline]
BUG: KASAN: global-out-of-bounds in kbd_event+0xe6b/0x3790 drivers/tty/vt/keyboard.c:1495
Write of size 8 at addr
ffffffff89a1b2d8 by task syz-executor108/1722
...
kbd_keycode drivers/tty/vt/keyboard.c:1411 [inline]
kbd_event+0xe6b/0x3790 drivers/tty/vt/keyboard.c:1495
input_to_handler+0x3b6/0x4c0 drivers/input/input.c:118
input_pass_values.part.0+0x2e3/0x720 drivers/input/input.c:145
input_pass_values drivers/input/input.c:949 [inline]
input_set_keycode+0x290/0x320 drivers/input/input.c:954
evdev_handle_set_keycode_v2+0xc4/0x120 drivers/input/evdev.c:882
evdev_do_ioctl drivers/input/evdev.c:1150 [inline]
Reported-by: syzbot+19340dff067c2d3835c0@syzkaller.appspotmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Tested-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Parav Pandit [Thu, 12 Dec 2019 09:12:13 +0000 (11:12 +0200)]
IB/mlx4: Follow mirror sequence of device add during device removal
commit
89f988d93c62384758b19323c886db917a80c371 upstream.
Current code device add sequence is:
ib_register_device()
ib_mad_init()
init_sriov_init()
register_netdev_notifier()
Therefore, the remove sequence should be,
unregister_netdev_notifier()
close_sriov()
mad_cleanup()
ib_unregister_device()
However it is not above.
Hence, make do above remove sequence.
Fixes: fa417f7b520ee ("IB/mlx4: Add support for IBoE")
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Link: https://lore.kernel.org/r/20191212091214.315005-3-leon@kernel.org
Signed-off-by: Doug Ledford <dledford@redhat.com>
[bwh: Backported to 3.16: No need to call mlx4_ib_diag_cleanup()]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Moni Shoua [Thu, 21 Aug 2014 11:28:42 +0000 (14:28 +0300)]
IB/mlx4: Avoid executing gid task when device is being removed
commit
4bf9715f184969dc703bde7be94919995024a6a9 upstream.
When device is being removed (e.g during VPI port link type change
from ETH to IB), tasks for gid table changes should not be executed.
Flush the current queue of tasks and block further tasks from entering the queue.
Signed-off-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Leo Yan [Wed, 27 Nov 2019 14:15:43 +0000 (22:15 +0800)]
tty: serial: msm_serial: Fix lockup for sysrq and oops
commit
0e4f7f920a5c6bfe5e851e989f27b35a0cc7fb7e upstream.
As the commit
677fe555cbfb ("serial: imx: Fix recursive locking bug")
has mentioned the uart driver might cause recursive locking between
normal printing and the kernel debugging facilities (e.g. sysrq and
oops). In the commit it gave out suggestion for fixing recursive
locking issue: "The solution is to avoid locking in the sysrq case
and trylock in the oops_in_progress case."
This patch follows the suggestion (also used the exactly same code with
other serial drivers, e.g. amba-pl011.c) to fix the recursive locking
issue, this can avoid stuck caused by deadlock and print out log for
sysrq and oops.
Fixes: 04896a77a97b ("msm_serial: serial driver for MSM7K onboard serial peripheral.")
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Link: https://lore.kernel.org/r/20191127141544.4277-2-leo.yan@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Heikki Krogerus [Thu, 12 Dec 2019 09:37:13 +0000 (12:37 +0300)]
usb: dwc3: pci: add ID for the Intel Comet Lake -H variant
commit
3c3caae4cd6e122472efcf64759ff6392fb6bce2 upstream.
The original ID that was added for Comet Lake PCH was
actually for the -LP (low power) variant even though the
constant for it said CMLH. Changing that while at it.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Felipe Balbi <balbi@kernel.org>
Link: https://lore.kernel.org/r/20191212093713.60614-1-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[bwh: Backported to 3.16:
- No properties support
- Adjust context, indentation]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Felipe Balbi [Wed, 13 Dec 2017 14:03:22 +0000 (16:03 +0200)]
usb: dwc3: pci: add support for TigerLake Devices
commit
b3649dee5fbb0f6585010e6e9313dfcbb075b22b upstream.
This patch adds the necessary PCI ID for TGP-LP devices.
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
[bwh: Backported to 3.16:
- No properties support
- Adjust context, indentation]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Felipe Balbi [Mon, 11 Jun 2018 08:21:12 +0000 (11:21 +0300)]
usb: dwc3: pci: Add Support for Intel Elkhart Lake Devices
commit
dbb0569de852fb4576d6f62078d515f989a181ca upstream.
This patch simply adds a new PCI Device ID
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
[bwh: Backported to 3.16:
- No properties support
- Adjust context, indentation]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Felipe Balbi [Thu, 31 Jan 2019 09:04:19 +0000 (11:04 +0200)]
usb: dwc3: pci: add support for Comet Lake PCH ID
commit
7ae622c978db6b2e28b4fced6ecd2a174492059d upstream.
This patch simply adds a new PCI Device ID
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
[bwh: Backported to 3.16:
- No properties support
- Adjust context, indentation]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Heikki Krogerus [Thu, 15 Jun 2017 09:57:30 +0000 (12:57 +0300)]
usb: dwc3: pci: add support for Intel IceLake
commit
00908693c481f7298adf8cf4d2ff3dfbea8c375f upstream.
PCI IDs for Intel IceLake.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
[bwh: Backported to 3.16: adjust context, indentation]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Heikki Krogerus [Fri, 1 Apr 2016 14:13:13 +0000 (17:13 +0300)]
usb: dwc3: pci: add Intel Cannonlake PCI IDs
commit
682179592e48fa66056fbad1a86604be4992f885 upstream.
Intel Cannonlake PCH has the same DWC3 than Intel
Sunrisepoint. Add the new IDs to the supported devices.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
[bwh: Backported to 3.16: adjust context, indentation]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Heikki Krogerus [Fri, 1 Apr 2016 14:13:12 +0000 (17:13 +0300)]
usb: dwc3: pci: add Intel Gemini Lake PCI ID
commit
8f8983a5683623b62b339d159573f95a1fce44f3 upstream.
Intel Gemini Lake SoC has the same DWC3 than Broxton. Add
the new ID to the supported Devices.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
[bwh: Backported to 3.16: adjust context, indentation]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Heikki Krogerus [Fri, 1 Apr 2016 14:13:11 +0000 (17:13 +0300)]
usb: dwc3: pci: add Intel Kabylake PCI ID
commit
4491ed5042f0419b22a4b08331adb54af31e2caa upstream.
Intel Kabylake PCH has the same DWC3 than Intel
Sunrisepoint. Add the new ID to the supported devices.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
[bwh: Backported to 3.16: adjust context, indentation]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Heikki Krogerus [Fri, 1 Apr 2016 14:13:10 +0000 (17:13 +0300)]
usb: dwc3: pci: add ID for one more Intel Broxton platform
commit
1ffb4d5cc78a3a99109ff0808ce6915de07a0588 upstream.
BXT-M is a Intel Broxton SoC based platform with unique PCI ID.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
[bwh: Backported to 3.16: adjust context, indentation]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Heikki Krogerus [Wed, 21 Oct 2015 11:37:04 +0000 (14:37 +0300)]
usb: dwc3: pci: add support for Intel Broxton SOC
commit
b4c580a43d520b7812c0fd064fbab929ce2f1da0 upstream.
PCI IDs for Broxton based platforms.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
[bwh: Backported to 3.16: adjust context, indentation]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Heikki Krogerus [Thu, 18 Dec 2014 14:39:14 +0000 (16:39 +0200)]
usb: dwc3: pci: add support for Intel Sunrise Point PCH
commit
84a2b61b6eb94036093531cdabc448dddfbae45a upstream.
Add PCI IDs for Intel Sunrise Point PCH.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
[bwh: Backported to 3.16: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Alan Cox [Wed, 24 Sep 2014 07:40:25 +0000 (10:40 +0300)]
usb: dwc3: pci: Add PCI ID for Intel Braswell
commit
7d643664ea559b36188cae264047ce3c9bfec3a2 upstream.
The device controller is the same but it has different PCI ID. Add this new
ID to the driver's list of supported IDs.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Mathias Nyman [Wed, 11 Dec 2019 14:20:07 +0000 (16:20 +0200)]
xhci: make sure interrupts are restored to correct state
commit
bd82873f23c9a6ad834348f8b83f3b6a5bca2c65 upstream.
spin_unlock_irqrestore() might be called with stale flags after
reading port status, possibly restoring interrupts to a incorrect
state.
If a usb2 port just finished resuming while the port status is read
the spin lock will be temporary released and re-acquired in a separate
function. The flags parameter is passed as value instead of a pointer,
not updating flags properly before the final spin_unlock_irqrestore()
is called.
Fixes: 8b3d45705e54 ("usb: Fix xHCI host issues on remote wakeup.")
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20191211142007.8847-7-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Mathias Nyman [Wed, 11 Dec 2019 14:20:06 +0000 (16:20 +0200)]
xhci: handle some XHCI_TRUST_TX_LENGTH quirks cases as default behaviour.
commit
7ff11162808cc2ec66353fc012c58bb449c892c3 upstream.
xhci driver claims it needs XHCI_TRUST_TX_LENGTH quirk for both
Broadcom/Cavium and a Renesas xHC controllers.
The quirk was inteded for handling false "success" complete event for
transfers that had data left untransferred.
These transfers should complete with "short packet" events instead.
In these two new cases the false "success" completion is reported
after a "short packet" if the TD consists of several TRBs.
xHCI specs 4.10.1.1.2 say remaining TRBs should report "short packet"
as well after the first short packet in a TD, but this issue seems so
common it doesn't make sense to add the quirk for all vendors.
Turn these events into short packets automatically instead.
This gets rid of the "The WARN Successful completion on short TX for
slot 1 ep 1: needs XHCI_TRUST_TX_LENGTH quirk" warning in many cases.
Reported-by: Eli Billauer <eli.billauer@gmail.com>
Reported-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Eli Billauer <eli.billauer@gmail.com>
Tested-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20191211142007.8847-6-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[bwh: Backported to 3.16: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Alan Stern [Tue, 10 Dec 2019 21:26:11 +0000 (16:26 -0500)]
HID: Fix slab-out-of-bounds read in hid_field_extract
commit
8ec321e96e056de84022c032ffea253431a83c3c upstream.
The syzbot fuzzer found a slab-out-of-bounds bug in the HID report
handler. The bug was caused by a report descriptor which included a
field with size 12 bits and count 4899, for a total size of 7349
bytes.
The usbhid driver uses at most a single-page 4-KB buffer for reports.
In the test there wasn't any problem about overflowing the buffer,
since only one byte was received from the device. Rather, the bug
occurred when the HID core tried to extract the data from the report
fields, which caused it to try reading data beyond the end of the
allocated buffer.
This patch fixes the problem by rejecting any report whose total
length exceeds the HID_MAX_BUFFER_SIZE limit (minus one byte to allow
for a possible report index). In theory a device could have a report
longer than that, but if there was such a thing we wouldn't handle it
correctly anyway.
Reported-and-tested-by: syzbot+09ef48aa58261464b621@syzkaller.appspotmail.com
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
David Hildenbrand [Wed, 11 Dec 2019 11:11:52 +0000 (12:11 +0100)]
virtio-balloon: fix managed page counts when migrating pages between zones
commit
63341ab03706e11a31e3dd8ccc0fbc9beaf723f0 upstream.
In case we have to migrate a ballon page to a newpage of another zone, the
managed page count of both zones is wrong. Paired with memory offlining
(which will adjust the managed page count), we can trigger kernel crashes
and all kinds of different symptoms.
One way to reproduce:
1. Start a QEMU guest with 4GB, no NUMA
2. Hotplug a 1GB DIMM and online the memory to ZONE_NORMAL
3. Inflate the balloon to 1GB
4. Unplug the DIMM (be quick, otherwise unmovable data ends up on it)
5. Observe /proc/zoneinfo
Node 0, zone Normal
pages free 16810
min
24848885473806
low
18471592959183339
high
36918337032892872
spanned 262144
present 262144
managed
18446744073709533486
6. Do anything that requires some memory (e.g., inflate the balloon some
more). The OOM goes crazy and the system crashes
[ 238.324946] Out of memory: Killed process 537 (login) total-vm:27584kB, anon-rss:860kB, file-rss:0kB, shmem-rss:00
[ 238.338585] systemd invoked oom-killer: gfp_mask=0x100cca(GFP_HIGHUSER_MOVABLE), order=0, oom_score_adj=0
[ 238.339420] CPU: 0 PID: 1 Comm: systemd Tainted: G D W 5.4.0-next-
20191204+ #75
[ 238.340139] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu4
[ 238.341121] Call Trace:
[ 238.341337] dump_stack+0x8f/0xd0
[ 238.341630] dump_header+0x61/0x5ea
[ 238.341942] oom_kill_process.cold+0xb/0x10
[ 238.342299] out_of_memory+0x24d/0x5a0
[ 238.342625] __alloc_pages_slowpath+0xd12/0x1020
[ 238.343024] __alloc_pages_nodemask+0x391/0x410
[ 238.343407] pagecache_get_page+0xc3/0x3a0
[ 238.343757] filemap_fault+0x804/0xc30
[ 238.344083] ? ext4_filemap_fault+0x28/0x42
[ 238.344444] ext4_filemap_fault+0x30/0x42
[ 238.344789] __do_fault+0x37/0x1a0
[ 238.345087] __handle_mm_fault+0x104d/0x1ab0
[ 238.345450] handle_mm_fault+0x169/0x360
[ 238.345790] do_user_addr_fault+0x20d/0x490
[ 238.346154] do_page_fault+0x31/0x210
[ 238.346468] async_page_fault+0x43/0x50
[ 238.346797] RIP: 0033:0x7f47eba4197e
[ 238.347110] Code: Bad RIP value.
[ 238.347387] RSP: 002b:
00007ffd7c0c1890 EFLAGS:
00010293
[ 238.347834] RAX:
0000000000000002 RBX:
000055d196a20a20 RCX:
00007f47eba4197e
[ 238.348437] RDX:
0000000000000033 RSI:
00007ffd7c0c18c0 RDI:
0000000000000004
[ 238.349047] RBP:
00007ffd7c0c1c20 R08:
0000000000000000 R09:
0000000000000033
[ 238.349660] R10:
00000000ffffffff R11:
0000000000000293 R12:
0000000000000001
[ 238.350261] R13:
ffffffffffffffff R14:
0000000000000000 R15:
00007ffd7c0c18c0
[ 238.350878] Mem-Info:
[ 238.351085] active_anon:3121 inactive_anon:51 isolated_anon:0
[ 238.351085] active_file:12 inactive_file:7 isolated_file:0
[ 238.351085] unevictable:0 dirty:0 writeback:0 unstable:0
[ 238.351085] slab_reclaimable:5565 slab_unreclaimable:10170
[ 238.351085] mapped:3 shmem:111 pagetables:155 bounce:0
[ 238.351085] free:720717 free_pcp:2 free_cma:0
[ 238.353757] Node 0 active_anon:12484kB inactive_anon:204kB active_file:48kB inactive_file:28kB unevictable:0kB iss
[ 238.355979] Node 0 DMA free:11556kB min:36kB low:48kB high:60kB reserved_highatomic:0KB active_anon:152kB inactivB
[ 238.358345] lowmem_reserve[]: 0 2955 2884 2884 2884
[ 238.358761] Node 0 DMA32 free:2677864kB min:7004kB low:10028kB high:13052kB reserved_highatomic:0KB active_anon:0B
[ 238.361202] lowmem_reserve[]: 0 0
72057594037927865 72057594037927865 72057594037927865
[ 238.361888] Node 0 Normal free:193448kB min:99395541895224kB low:73886371836733356kB high:147673348131571488kB reB
[ 238.364765] lowmem_reserve[]: 0 0 0 0 0
[ 238.365101] Node 0 DMA: 7*4kB (U) 5*8kB (UE) 6*16kB (UME) 2*32kB (UM) 1*64kB (U) 2*128kB (UE) 3*256kB (UME) 2*512B
[ 238.366379] Node 0 DMA32: 0*4kB 1*8kB (U) 2*16kB (UM) 2*32kB (UM) 2*64kB (UM) 1*128kB (U) 1*256kB (U) 1*512kB (U)B
[ 238.367654] Node 0 Normal: 1985*4kB (UME) 1321*8kB (UME) 844*16kB (UME) 524*32kB (UME) 300*64kB (UME) 138*128kB (B
[ 238.369184] Node 0 hugepages_total=0 hugepages_free=0 hugepages_surp=0 hugepages_size=2048kB
[ 238.369915] 130 total pagecache pages
[ 238.370241] 0 pages in swap cache
[ 238.370533] Swap cache stats: add 0, delete 0, find 0/0
[ 238.370981] Free swap = 0kB
[ 238.371239] Total swap = 0kB
[ 238.371488]
1048445 pages RAM
[ 238.371756] 0 pages HighMem/MovableOnly
[ 238.372090] 306992 pages reserved
[ 238.372376] 0 pages cma reserved
[ 238.372661] 0 pages hwpoisoned
In another instance (older kernel), I was able to observe this
(negative page count :/):
[ 180.896971] Offlined Pages 32768
[ 182.667462] Offlined Pages 32768
[ 184.408117] Offlined Pages 32768
[ 186.026321] Offlined Pages 32768
[ 187.684861] Offlined Pages 32768
[ 189.227013] Offlined Pages 32768
[ 190.830303] Offlined Pages 32768
[ 190.833071] Built 1 zonelists, mobility grouping on. Total pages: -
36920272750453009
In another instance (older kernel), I was no longer able to start any
process:
[root@vm ~]# [ 214.348068] Offlined Pages 32768
[ 215.973009] Offlined Pages 32768
cat /proc/meminfo
-bash: fork: Cannot allocate memory
[root@vm ~]# cat /proc/meminfo
-bash: fork: Cannot allocate memory
Fix it by properly adjusting the managed page count when migrating if
the zone changed. The managed page count of the zones now looks after
unplug of the DIMM (and after deflating the balloon) just like before
inflating the balloon (and plugging+onlining the DIMM).
We'll temporarily modify the totalram page count. If this ever becomes a
problem, we can fine tune by providing helpers that don't touch
the totalram pages (e.g., adjust_zone_managed_page_count()).
Please note that fixing up the managed page count is only necessary when
we adjusted the managed page count when inflating - only if we
don't have VIRTIO_BALLOON_F_DEFLATE_ON_OOM. With that feature, the
managed page count is not touched when inflating/deflating.
Reported-by: Yumei Huang <yuhuang@redhat.com>
Fixes: 3dcc0571cd64 ("mm: correctly update zone->managed_pages")
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Jiang Liu <liuj97@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: virtualization@lists.linux-foundation.org
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
[bwh: Backported to 3.16: Deflate-on-OOM is not supported at all so don't
check that flag]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Russell King [Sat, 7 Dec 2019 16:20:18 +0000 (16:20 +0000)]
gpiolib: fix up emulated open drain outputs
commit
256efaea1fdc4e38970489197409a26125ee0aaa upstream.
gpiolib has a corner case with open drain outputs that are emulated.
When such outputs are outputting a logic 1, emulation will set the
hardware to input mode, which will cause gpiod_get_direction() to
report that it is in input mode. This is different from the behaviour
with a true open-drain output.
Unify the semantics here.
Suggested-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Johan Hovold [Tue, 10 Dec 2019 11:47:51 +0000 (12:47 +0100)]
staging: rtl8712: fix interface sanity check
commit
c724f776f048538ecfdf53a52b7a522309f5c504 upstream.
Make sure to use the current alternate setting when verifying the
interface descriptors to avoid binding to an invalid interface.
Failing to do so could cause the driver to misbehave or trigger a WARN()
in usb_submit_urb() that kernels with panic_on_warn set would choke on.
Fixes: 2865d42c78a9 ("staging: r8712u: Add the new driver to the mainline kernel")
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20191210114751.5119-3-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[bwh: Backported to 3.16: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
projects / wrapfs-3.16.y.git / log