auxdisplay: hd44780: Fix oops on module unloading

commit 333ff32d54cdefc2e479892e7f15ac91e026b57d upstream.

Fixes: 718e05ed92ec ("auxdisplay: Introduce hd44780_common.[ch]")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/lkml/CAHp75VfKyqy+vM0XkP9Yb+znGOTVT4zYCRY3A3nQ7C3WNUVN0g@mail.gmail.com/
Reported-By: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Lars Poeschel <poeschel@lemonage.de>
Tested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
[added Link, Fixes, Cc stable tags, edited message]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

time: Handle negative seconds correctly in timespec64_to_ns()

commit 39ff83f2f6cc5cc1458dfcea9697f96338210beb upstream.

timespec64_ns() prevents multiplication overflows by comparing the seconds
value of the timespec to KTIME_SEC_MAX. If the value is greater or equal it
returns KTIME_MAX.

But that check casts the signed seconds value to unsigned which makes the
comparision true for all negative values and therefore return wrongly
KTIME_MAX.

Negative second values are perfectly valid and required in some places,
e.g. ptp_clock_adjtime().

Remove the cast and add a check for the negative boundary which is required
to prevent undefined behaviour due to multiplication underflow.

Fixes: cb47755725da ("time: Prevent undefined behaviour in timespec64_to_ns()")'
Signed-off-by: Lukas Hannen <lukas.hannen@opensource.tttech-industrial.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/AM6PR01MB541637BD6F336B8FFB72AF80EEC69@AM6PR01MB5416.eurprd01.prod.exchangelabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

f2fs: guarantee to write dirty data when enabling checkpoint back

commit dddd3d65293a52c2c3850c19b1e5115712e534d8 upstream.

We must flush all the dirty data when enabling checkpoint back. Let's guarantee
that first by adding a retry logic on sync_inodes_sb(). In addition to that,
this patch adds to flush data in fsync when checkpoint is disabled, which can
mitigate the sync_inodes_sb() failures in advance.

Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iwlwifi Add support for ax201 in Samsung Galaxy Book Flex2 Alpha

commit 2f32c147a3816d789722c0bd242a9431332ec3ed upstream.

The Samsung Galaxy Book Flex2 Alpha uses an ax201 with the ID a0f0/6074.
This works fine with the existing driver once it knows to claim it.
Simple patch to add the device.

Signed-off-by: Justin M. Forbes <jforbes@fedoraproject.org>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210702223155.1981510-1-jforbes@fedoraproject.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: rt5682: Remove unused variable in rt5682_i2c_remove()

commit a1ea05723c27a6f77894a60038a7b2b12fcec9a7 upstream.

In commit 772d44526e20 ("ASoC: rt5682: Properly turn off regulators if
wrong device ID") I deleted code but forgot to delete a variable
that's now unused. Delete it.

Fixes: 772d44526e20 ("ASoC: rt5682: Properly turn off regulators if wrong device ID")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20210813073402.1.Iaa9425cfab80f5233afa78b32d02b6dc23256eb3@changeid
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipv4: fix endianness issue in inet_rtm_getroute_build_skb()

[ Upstream commit 92548b0ee220e000d81c27ac9a80e0ede895a881 ]

The UDP length field should be in network order.
This removes the following sparse error:

net/ipv4/route.c:3173:27: warning: incorrect type in assignment (different base types)
net/ipv4/route.c:3173:27:    expected restricted __be16 [usertype] len
net/ipv4/route.c:3173:27:    got unsigned long

Fixes: 404eb77ea766 ("ipv4: support sport, dport and ip_proto in RTM_GETROUTE")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Roopa Prabhu <roopa@nvidia.com>
Cc: David Ahern <dsahern@kernel.org>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

octeontx2-af: Set proper errorcode for IPv4 checksum errors

[ Upstream commit 1e4428b6dba9b683dc2ec0a56ed7879de3200cce ]

With current config, for packets with IPv4 checksum errors,
errorcode is being set to UNKNOWN. Hence added a separate
errorcodes for outer and inner IPv4 checksum and changed
NPC configuration accordingly.

Also turn on L2 multicast address check in NPC protocol check block.

Fixes: 6b3321bacc5a ("octeontx2-af: Enable packet length and csum validation")
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

octeontx2-af: Fix static code analyzer reported issues

[ Upstream commit 698a82ebfb4b2f2014baf31b7324b328a2a6366e ]

This patch fixes the static code analyzer reported issues
in rvu_npc.c. The reported errors are different sizes of
operands in bitops and returning uninitialized values.

Fixes: 651cd2652339 ("octeontx2-af: MCAM entry installation support")
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

octeontx2-af: Fix mailbox errors in nix_rss_flowkey_cfg

[ Upstream commit f2e4568ec95166605c77577953b2787c7f909978 ]

In npc_update_vf_flow_entry function the loop cursor
'index' is being changed inside the loop causing
the loop to spin forever. This in turn hogs the kworker
thread forever and no other mbox message is processed
by AF driver after that. Fix this by using
another variable in the loop.

Fixes: 55307fcb9258 ("octeontx2-af: Add mbox messages to install and delete MCAM rules")
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

octeontx2-af: Fix loop in free and unmap counter

[ Upstream commit 6537e96d743b89294b397b4865c6c061abae31b0 ]

When the given counter does not belong to the entry
then code ends up in infinite loop because the loop
cursor, entry is not getting updated further. This
patch fixes that by updating entry for every iteration.

Fixes: a958dd59f9ce ("octeontx2-af: Map or unmap NPC MCAM entry and counter")
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: qualcomm: fix QCA7000 checksum handling

[ Upstream commit 429205da6c834447a57279af128bdd56ccd5225e ]

Based on tests the QCA7000 doesn't support checksum offloading. So assume
ip_summed is CHECKSUM_NONE and let the kernel take care of the checksum
handling. This fixes data transfer issues in noisy environments.

Reported-by: Michael Heimpold <michael.heimpold@in-tech.com>
Fixes: 291ab06ecf67 ("net: qualcomm: new Ethernet over SPI driver for QCA7000")
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: sched: Fix qdisc_rate_table refcount leak when get tcf_block failed

[ Upstream commit c66070125837900163b81a03063ddd657a7e9bfb ]

The reference counting issue happens in one exception handling path of
cbq_change_class(). When failing to get tcf_block, the function forgets
to decrease the refcount of "rtab" increased by qdisc_put_rtab(),
causing a refcount leak.

Fix this issue by jumping to "failure" label when get tcf_block failed.

Fixes: 6529eaba33f0 ("net: sched: introduce tcf block infractructure")
Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn>
Reviewed-by: Cong Wang <cong.wang@bytedance.com>
Link: https://lore.kernel.org/r/1630252681-71588-1-git-send-email-xiyuyang19@fudan.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

sch_htb: Fix inconsistency when leaf qdisc creation fails

[ Upstream commit ca49bfd90a9dde175d2929dc1544b54841e33804 ]

In HTB offload mode, qdiscs of leaf classes are grafted to netdev
queues. sch_htb expects the dev_queue field of these qdiscs to point to
the corresponding queues. However, qdisc creation may fail, and in that
case noop_qdisc is used instead. Its dev_queue doesn't point to the
right queue, so sch_htb can lose track of used netdev queues, which will
cause internal inconsistencies.

This commit fixes this bug by keeping track of the netdev queue inside
struct htb_class. All reads of cl->leaf.q->dev_queue are replaced by the
new field, the two values are synced on writes, and WARNs are added to
assert equality of the two values.

The driver API has changed: when TC_HTB_LEAF_DEL needs to move a queue,
the driver used to pass the old and new queue IDs to sch_htb. Now that
there is a new field (offload_queue) in struct htb_class that needs to
be updated on this operation, the driver will pass the old class ID to
sch_htb instead (it already knows the new class ID).

Fixes: d03b195b5aa0 ("sch_htb: Hierarchical QoS hardware offload")
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://lore.kernel.org/r/20210826115425.1744053-1-maximmi@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: qrtr: make checks in qrtr_endpoint_post() stricter

[ Upstream commit aaa8e4922c887ff47ad66ef918193682bccc1905 ]

These checks are still not strict enough.  The main problem is that if
"cb->type == QRTR_TYPE_NEW_SERVER" is true then "len - hdrlen" is
guaranteed to be 4 but we need to be at least 16 bytes.  In fact, we
can reject everything smaller than sizeof(*pkt) which is 20 bytes.

Also I don't like the ALIGN(size, 4).  It's better to just insist that
data is needs to be aligned at the start.

Fixes: 0baa99ee353c ("net: qrtr: Allow non-immediate node routing")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ipv4: make exception cache less predictible

[ Upstream commit 67d6d681e15b578c1725bad8ad079e05d1c48a8e ]

Even after commit 6457378fe796 ("ipv4: use siphash instead of Jenkins in
fnhe_hashfun()"), an attacker can still use brute force to learn
some secrets from a victim linux host.

One way to defeat these attacks is to make the max depth of the hash
table bucket a random value.

Before this patch, each bucket of the hash table used to store exceptions
could contain 6 items under attack.

After the patch, each bucket would contains a random number of items,
between 6 and 10. The attacker can no longer infer secrets.

This is slightly increasing memory size used by the hash table,
by 50% in average, we do not expect this to be a problem.

This patch is more complex than the prior one (IPv6 equivalent),
because IPv4 was reusing the oldest entry.
Since we need to be able to evict more than one entry per
update_or_create_fnhe() call, I had to replace
fnhe_oldest() with fnhe_remove_oldest().

Also note that we will queue extra kfree_rcu() calls under stress,
which hopefully wont be a too big issue.

Fixes: 4895c771c7f0 ("ipv4: Add FIB nexthop exceptions.")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Keyu Man <kman001@ucr.edu>
Cc: Willy Tarreau <w@1wt.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>
Reviewed-by: David Ahern <dsahern@kernel.org>
Tested-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ipv6: make exception cache less predictible

[ Upstream commit a00df2caffed3883c341d5685f830434312e4a43 ]

Even after commit 4785305c05b2 ("ipv6: use siphash in rt6_exception_hash()"),
an attacker can still use brute force to learn some secrets from a victim
linux host.

One way to defeat these attacks is to make the max depth of the hash
table bucket a random value.

Before this patch, each bucket of the hash table used to store exceptions
could contain 6 items under attack.

After the patch, each bucket would contains a random number of items,
between 6 and 10. The attacker can no longer infer secrets.

This is slightly increasing memory size used by the hash table,
we do not expect this to be a problem.

Following patch is dealing with the same issue in IPv4.

Fixes: 35732d01fe31 ("ipv6: introduce a hash table to store dst cache")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Keyu Man <kman001@ucr.edu>
Cc: Wei Wang <weiwan@google.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

brcmfmac: pcie: fix oops on failure to resume and reprobe

[ Upstream commit d745ca4f2c4ae9f1bd8cf7d8ac6e22d739bffd19 ]

When resuming from suspend, brcmf_pcie_pm_leave_D3 will first attempt a
hot resume and then fall back to removing the PCI device and then
reprobing. If this probe fails, the kernel will oops, because brcmf_err,
which is called to report the failure will dereference the stale bus
pointer. Open code and use the default bus-less brcmf_err to avoid this.

Fixes: 8602e62441ab ("brcmfmac: pass bus to the __brcmf_err() in pcie.c")
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210817063521.22450-1-a.fatoum@pengutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>

bcma: Fix memory leak for internally-handled cores

[ Upstream commit b63aed3ff195130fef12e0af590f4838cf0201d8 ]

kmemleak reported that dev_name() of internally-handled cores were leaked
on driver unbinding. Let's use device_initialize() to take refcounts for
them and put_device() to properly free the related stuff.

While looking at it, there's another potential issue for those which should
be *registered* into driver core. If device_register() failed, we put
device once and freed bcma_device structures. In bcma_unregister_cores(),
they're treated as unregistered and we hit both UAF and double-free. That
smells not good and has also been fixed now.

Fixes: ab54bc8460b5 ("bcma: fill core details for every device")
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210727025232.663-2-yuzenghui@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

atlantic: Fix driver resume flow.

[ Upstream commit 57f780f1c43362b86fd23d20bd940e2468237716 ]

Driver crashes when restoring from the Hibernate. In the resume flow,
driver need to clean up the older nic/vec objects and re-initialize them.

Fixes: 8aaa112a57c1d ("net: atlantic: refactoring pm logic")
Signed-off-by: Sudarsana Reddy Kalluru <skalluru@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: usb-audio: Add lowlatency module option

[ Upstream commit 4801bee7d5a36c199b734a28cde5259183aff822 ]

For making user to switch back to the old playback mode, this patch
adds a new module option 'lowlatency' to snd-usb-audio driver.
When user face a regression due to the recent low-latency playback
support, they can test easily by passing lowlatency=0 option without
rebuilding the kernel.

Fixes: 307cc9baac5c ("ALSA: usb-audio: Reduce latency at playback start, take#2")
Link: https://lore.kernel.org/r/20210829073830.22686-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ath6kl: wmi: fix an error code in ath6kl_wmi_sync_point()

[ Upstream commit fd6729ec534cffbbeb3917761e6d1fe6a412d3fe ]

This error path is unlikely because of it checked for NULL and
returned -ENOMEM earlier in the function.  But it should return
an error code here as well if we ever do hit it because of a
race condition or something.

Fixes: bdcd81707973 ("Add ath6kl cleaned up driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210813113438.GB30697@kili
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: phy: marvell10g: fix broken PHY interrupts for anyone after us in the driver probe list

[ Upstream commit 0d55649d2ad7296acfda9127e1d05518d025734a ]

Enabling interrupts via device tree for the internal PHYs on the
mv88e6390 DSA switch does not work. The driver insists to use poll mode.

Stage one debugging shows that the fwnode_mdiobus_phy_device_register
function calls fwnode_irq_get properly, and phy->irq is set to a valid
interrupt line initially.

But it is then cleared.

Stage two debugging shows that it is cleared here:

phy_probe:

  /* Disable the interrupt if the PHY doesn't support it
   * but the interrupt is still a valid one
   */
  if (!phy_drv_supports_irq(phydrv) && phy_interrupt_is_valid(phydev))
phydev->irq = PHY_POLL;

Okay, so does the "Marvell 88E6390 Family" PHY driver not have the
.config_intr and .handle_interrupt function pointers? Yes it does.

Stage three debugging shows that the PHY device does not attempt a probe
against the "Marvell 88E6390 Family" driver, but against the "mv88x3310"
driver.

Okay, so why does the "mv88x3310" driver match on a mv88x6390 internal
PHY? The PHY IDs (MARVELL_PHY_ID_88E6390_FAMILY vs
MARVELL_PHY_ID_88X3310) are way different.

Stage four debugging has us looking through:

phy_device_register
-> device_add
   -> bus_probe_device
      -> device_initial_probe
         -> __device_attach
            -> bus_for_each_drv
               -> driver_match_device
                  -> drv->bus->match
                     -> phy_bus_match

Okay, so as we said, the MII_PHYSID1 of mv88e6390 does not match the
mv88x3310 driver's PHY mask & ID, so why would phy_bus_match return...

Ahh, phy_bus_match calls a shortcircuit method,
phydrv->match_phy_device, and does not even bother to compare the PHY ID
if that is implemented.

So of course, we go inside the marvell10g.c driver and sure enough, it
implements .match_phy_device and does not bother to check the PHY ID.

What's interesting though is that at the end of the device_add() from
phy_device_register(), the driver for the internal PHYs _is_ the proper
"Marvell 88E6390 Family". This is because "mv88x3310" ends up failing to
probe after all, and __device_attach_driver(), to quote:

  /*
   * Ignore errors returned by ->probe so that the next driver can try
   * its luck.
   */

The next (and only other) driver that matches is the 6390 driver. For
this one, phy_probe doesn't fail, and everything expects to work as
normal, EXCEPT phydev->irq has already been cleared by the previous
unsuccessful probe of a driver which did not implement PHY interrupts,
and therefore cleared that IRQ.

Okay, so it is not just Marvell 6390 that has PHY interrupts broken.
Stuff like Atheros, Aquantia, Broadcom, Qualcomm work because they are
lexicographically before Marvell, and stuff like NXP, Realtek, Vitesse
are broken.

This goes to show how fragile it is to reset phydev->irq = PHY_POLL from
the actual beginning of phy_probe itself. That seems like an actual bug
of its own too, since phy_probe has side effects which are not restored
on probe failure, but the line of thought probably was, the same driver
will attempt probe again, so it doesn't matter. Well, looks like it
does.

Maybe it would make more sense to move the phydev->irq clearing after
the actual device_add() in phy_device_register() completes, and the
bound driver is the actual final one.

(also, a bit frightening that drivers are permitted to bypass the MDIO
bus matching in such a trivial way and perform PHY reads and writes from
the .match_phy_device method, on devices that do not even belong to
them. In the general case it might not be guaranteed that the MDIO
accesses one driver needs to make to figure out whether to match on a
device is safe for all other PHY devices)

Fixes: a5de4be0aaaa ("net: phy: marvell10g: fix differentiation of 88X3310 from 88X3340")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20210827132541.28953-1-kabel@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ice: Only lock to update netdev dev_addr

[ Upstream commit b357d9717be7f95fde2c6c4650b186a995b71e59 ]

commit 3ba7f53f8bf1 ("ice: don't remove netdev->dev_addr from uc sync
list") introduced calls to netif_addr_lock_bh() and
netif_addr_unlock_bh() in the driver's ndo_set_mac() callback. This is
fine since the driver is updated the netdev's dev_addr, but since this
is a spinlock, the driver cannot sleep when the lock is held.
Unfortunately the functions to add/delete MAC filters depend on a mutex.
This was causing a trace with the lock debug kernel config options
enabled when changing the mac address via iproute.

[  203.273059] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:281
[  203.273065] in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 6698, name: ip
[  203.273068] Preemption disabled at:
[  203.273068] [<ffffffffc04aaeab>] ice_set_mac_address+0x8b/0x1c0 [ice]
[  203.273097] CPU: 31 PID: 6698 Comm: ip Tainted: G S      W I       5.14.0-rc4 #2
[  203.273100] Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.02.01.0010.010620200716 01/06/2020
[  203.273102] Call Trace:
[  203.273107]  dump_stack_lvl+0x33/0x42
[  203.273113]  ? ice_set_mac_address+0x8b/0x1c0 [ice]
[  203.273124]  ___might_sleep.cold.150+0xda/0xea
[  203.273131]  mutex_lock+0x1c/0x40
[  203.273136]  ice_remove_mac+0xe3/0x180 [ice]
[  203.273155]  ? ice_fltr_add_mac_list+0x20/0x20 [ice]
[  203.273175]  ice_fltr_prepare_mac+0x43/0xa0 [ice]
[  203.273194]  ice_set_mac_address+0xab/0x1c0 [ice]
[  203.273206]  dev_set_mac_address+0xb8/0x120
[  203.273210]  dev_set_mac_address_user+0x2c/0x50
[  203.273212]  do_setlink+0x1dd/0x10e0
[  203.273217]  ? __nla_validate_parse+0x12d/0x1a0
[  203.273221]  __rtnl_newlink+0x530/0x910
[  203.273224]  ? __kmalloc_node_track_caller+0x17f/0x380
[  203.273230]  ? preempt_count_add+0x68/0xa0
[  203.273236]  ? _raw_spin_lock_irqsave+0x1f/0x30
[  203.273241]  ? kmem_cache_alloc_trace+0x4d/0x440
[  203.273244]  rtnl_newlink+0x43/0x60
[  203.273245]  rtnetlink_rcv_msg+0x13a/0x380
[  203.273248]  ? rtnl_calcit.isra.40+0x130/0x130
[  203.273250]  netlink_rcv_skb+0x4e/0x100
[  203.273256]  netlink_unicast+0x1a2/0x280
[  203.273258]  netlink_sendmsg+0x242/0x490
[  203.273260]  sock_sendmsg+0x58/0x60
[  203.273263]  ____sys_sendmsg+0x1ef/0x260
[  203.273265]  ? copy_msghdr_from_user+0x5c/0x90
[  203.273268]  ? ____sys_recvmsg+0xe6/0x170
[  203.273270]  ___sys_sendmsg+0x7c/0xc0
[  203.273272]  ? copy_msghdr_from_user+0x5c/0x90
[  203.273274]  ? ___sys_recvmsg+0x89/0xc0
[  203.273276]  ? __netlink_sendskb+0x50/0x50
[  203.273278]  ? mod_objcg_state+0xee/0x310
[  203.273282]  ? __dentry_kill+0x114/0x170
[  203.273286]  ? get_max_files+0x10/0x10
[  203.273288]  __sys_sendmsg+0x57/0xa0
[  203.273290]  do_syscall_64+0x37/0x80
[  203.273295]  entry_SYSCALL_64_after_hwframe+0x44/0xae
[  203.273296] RIP: 0033:0x7f8edf96e278
[  203.273298] Code: 89 02 48 c7 c0 ff ff ff ff eb b5 0f 1f 80 00 00 00 00 f3 0f 1e fa 48 8d 05 25 63 2c 00 8b 00 85 c0 75 17 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 58 c3 0f 1f 80 00 00 00 00 41 54 41 89 d4 55
[  203.273300] RSP: 002b:00007ffcb8bdac08 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
[  203.273303] RAX: ffffffffffffffda RBX: 000000006115e0ae RCX: 00007f8edf96e278
[  203.273304] RDX: 0000000000000000 RSI: 00007ffcb8bdac70 RDI: 0000000000000003
[  203.273305] RBP: 0000000000000000 R08: 0000000000000001 R09: 00007ffcb8bda5b0
[  203.273306] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000001
[  203.273306] R13: 0000555e10092020 R14: 0000000000000000 R15: 0000000000000005

Fix this by only locking when changing the netdev->dev_addr. Also, make
sure to restore the old netdev->dev_addr on any failures.

Fixes: 3ba7f53f8bf1 ("ice: don't remove netdev->dev_addr from uc sync list")
Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ice: restart periodic outputs around time changes

[ Upstream commit 9ee313433c483e4a6ecd517c38c0f8aee1962c53 ]

When we enabled auxiliary input/output support for the E810 device, we
forgot to add logic to restart the output when we change time. This is
important as the periodic output will be incorrect after a time change
otherwise.

This unfortunately includes the adjust time function, even though it
uses an atomic hardware interface. The atomic adjustment can still cause
the pin output to stall permanently, so we need to stop and restart it.

Introduce wrapper functions to temporarily disable and then re-enable
the clock outputs.

Fixes: 172db5f91d5f ("ice: add support for auxiliary input/output pins")
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Sunitha D Mekala <sunithax.d.mekala@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ice: add lock around Tx timestamp tracker flush

[ Upstream commit 4dd0d5c33c3ebf24a07cae6141648aeb7ba56072 ]

The driver didn't take the lock while flushing the Tx tracker, which
could cause a race where one thread is trying to read timestamps out
while another thread is trying to read the tracker to check the
timestamps.

Avoid this by ensuring that flushing is locked against read accesses.

Fixes: ea9b847cda64 ("ice: enable transmit timestamps for E810 devices")
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ice: fix Tx queue iteration for Tx timestamp enablement

[ Upstream commit 84c5fb8c4264ec12ef9d21905c562d2297a0234e ]

The driver accidentally copied the ice_for_each_rxq iterator when
implementing enablement of the ptp_tx bit for the Tx rings. We still
load the Tx rings and set the ptp_tx field, but we iterate over the
count of the num_rxq.

If the number of Tx and Rx queues differ, this could either cause
a buffer overrun when accessing the tx_rings list if num_txq is greater
than num_rxq, or it could cause us to fail to enable Tx timestamps for
some rings.

This was not noticed originally as we generally have the same number of
Tx and Rx queues.

Fixes: ea9b847cda64 ("ice: enable transmit timestamps for E810 devices")
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

misc/pvpanic: fix set driver data

[ Upstream commit a99009bc4f2f0b46e6c553704fda0b67e04395f5 ]

Add again dev_set_drvdata(), but this time in devm_pvpanic_probe(), in order
for dev_get_drvdata() to not return NULL.

Fixes: 394febc9d0a6 ("misc/pvpanic: Make 'pvpanic_probe()' resource managed")
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mihai Carabas <mihai.carabas@oracle.com>
Link: https://lore.kernel.org/r/1629385946-4584-2-git-send-email-mihai.carabas@oracle.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx5e: Use correct eswitch for stack devices with lag

[ Upstream commit f9d196bd632b8b79261ec3366c30ec3923ea9a02 ]

If link aggregation is used within stack devices driver rejects encap
rules if PF of the VF tunnel device is down. This happens because route
resolved for other PF and its eswitch instance is used to determine
correct vport.
To fix that use devcom feature to retrieve other eswitch instance if
failed to find vport for the 1st eswitch and LAG is active.

Fixes: 10742efc20a4 ("net/mlx5e: VF tunnel TX traffic offloading")
Signed-off-by: Dmytro Linkin <dlinkin@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx5: E-Switch, Set vhca id valid flag when creating indir fwd group

[ Upstream commit ca6891f9b27db7764bba0798202b0a21d0dc909c ]

When indirect forward group is created, flow is added with vhca id but
without setting vhca id valid flag which violates the PRM.

Fix by setting the missing flag, vhca id valid.

Fixes: 34ca65352ddf ("net/mlx5: E-Switch, Indirect table infrastructure")
Signed-off-by: Maor Dickman <maord@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx5e: Fix possible use-after-free deleting fdb rule

[ Upstream commit 9a5f9cc794e17cf6ed2a5bb215d2e8b6832db444 ]

After neigh-update-add failure we are still with a slow path rule but
the driver always assume the rule is an fdb rule.
Fix neigh-update-del by checking slow path tc flag on the flow.
Also fix neigh-update-add for when neigh-update-del fails the same.

Fixes: 5dbe906ff1d5 ("net/mlx5e: Use a slow path rule instead if vxlan neighbour isn't available")
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Paul Blakey <paulb@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx5: Remove all auxiliary devices at the unregister event

[ Upstream commit 8e7e2e8ed0e251138926838b7933f8eb6dd56b12 ]

The call to mlx5_unregister_device() means that mlx5_core driver is
removed. In such scenario, we need to disregard all other flags like
attach/detach and forcibly remove all auxiliary devices.

Fixes: a5ae8fc9058e ("net/mlx5e: Don't create devices during unload flow")
Tested-and-Reported-by: Yicong Yang <yangyicong@hisilicon.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx5: Lag, fix multipath lag activation

[ Upstream commit 2f8b6161cca5fb34b0065e2eac8bb2b61b7bfe87 ]

When handling FIB_EVENT_ENTRY_REPLACE event for a new multipath route,
lag activation can be missed if a stale (struct lag_mp)->mfi pointer
exists, which was associated with an older multipath route that had been
removed.

Normally, when a route is removed, it triggers mlx5_lag_fib_event(),
which handles FIB_EVENT_ENTRY_DEL and clears mfi pointer. But, if
mlx5_lag_check_prereq() condition isn't met, for example when eswitch is
in legacy mode, the fib event is skipped and mfi pointer becomes stale.

Fix by resetting mfi pointer to NULL in mlx5_deactivate_lag().

Fixes: 8a66e4585979 ("net/mlx5: Change ownership model for lag")
Signed-off-by: Dima Chumak <dchumak@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iwlwifi: skip first element in the WTAS ACPI table

[ Upstream commit 19426d54302e199b3fd2d575f926a13af66be2b9 ]

By mistake we were considering the first element of the WTAS wifi
package as part of the data we want to rid, but that element is the wifi
package signature (always 0x07), so it should be skipped.

Change the code to read the data starting from element 1 instead.

Signed-off-by: Abhishek Naik <abhishek.naik@intel.com>
Fixes: 28dd7ccdc56f ("iwlwifi: acpi: read TAS table from ACPI and send it to the FW")
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210805141826.ff8148197b15.I70636c04e37b2b57a5df3ce611511f62203d27a7@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: wcd9335: Disable irq on slave ports in the remove function

[ Upstream commit d3efd26af2e044ff2b48d38bb871630282d77e60 ]

The probe calls 'wcd9335_setup_irqs()' to enable interrupts on all slave
ports.
This must be undone in the remove function.

Add a 'wcd9335_teardown_irqs()' function that undoes 'wcd9335_setup_irqs()'
function, and call it from the remove function.

Fixes: 20aedafdf492 ("ASoC: wcd9335: add support to wcd9335 codec")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Message-Id: <8f761244d79bd4c098af8a482be9121d3a486d1b.1629091028.git.christophe.jaillet@wanadoo.fr>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: wcd9335: Fix a memory leak in the error handling path of the probe function

[ Upstream commit fc6fc81caa63900cef9ebb8b2e365c3ed5a9effb ]

If 'wcd9335_setup_irqs()' fails, me must release the memory allocated in
'wcd_clsh_ctrl_alloc()', as already done in the remove function.

Add an error handling path and the missing 'wcd_clsh_ctrl_free()' call.

Fixes: 20aedafdf492 ("ASoC: wcd9335: add support to wcd9335 codec")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Message-Id: <6dc12372f09fabb70bf05941dbe6a1382dc93e43.1629091028.git.christophe.jaillet@wanadoo.fr>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: wcd9335: Fix a double irq free in the remove function

[ Upstream commit 7a6a723e98aa45f393e6add18f7309dfffa1b0e2 ]

There is no point in calling 'free_irq()' explicitly for
'WCD9335_IRQ_SLIMBUS' in the remove function.

The irqs are requested in 'wcd9335_setup_irqs()' using a resource managed
function (i.e. 'devm_request_threaded_irq()').
'wcd9335_setup_irqs()' requests all what is defined in the 'wcd9335_irqs'
structure.
This structure has only one entry for 'WCD9335_IRQ_SLIMBUS'.

So 'devm_request...irq()' + explicit 'free_irq()' would lead to a double
free.

Remove the unneeded 'free_irq()' from the remove function.

Fixes: 20aedafdf492 ("ASoC: wcd9335: add support to wcd9335 codec")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Message-Id: <0614d63bc00edd7e81dd367504128f3d84f72efa.1629091028.git.christophe.jaillet@wanadoo.fr>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tty: serial: fsl_lpuart: fix the wrong mapbase value

[ Upstream commit d5c38948448abc2bb6b36dbf85a554bf4748885e ]

Register offset needs to be applied on mapbase also.
dma_tx/rx_request use the physical address of UARTDATA.
Register offset is currently only applied to membase (the
corresponding virtual addr) but not on mapbase.

Fixes: 24b1e5f0e83c ("tty: serial: lpuart: add imx7ulp support")
Reviewed-by: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: Adriana Reus <adriana.reus@nxp.com>
Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Signed-off-by: Andy Duan <fugang.duan@nxp.com>
Link: https://lore.kernel.org/r/20210819021033.32606-1-sherry.sun@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: bdc: Fix a resource leak in the error handling path of 'bdc_probe()'

[ Upstream commit 6f15a2a09cecb7a2faba4a75bbd101f6f962294b ]

If an error occurs after a successful 'clk_prepare_enable()' call, it must
be undone by a corresponding 'clk_disable_unprepare()' call.
This call is already present in the remove function.

Add this call in the error handling path and reorder the code so that the
'clk_prepare_enable()' call happens later in the function.
The goal is to have as much managed resources functions as possible
before the 'clk_prepare_enable()' call in order to keep the error handling
path simple.

While at it, remove the now unneeded 'clk' variable.

Fixes: c87dca047849 ("usb: bdc: Add clock enable for new chips with a separate BDC clock")
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/f8a4a6897deb0c8cb2e576580790303550f15fcd.1629314734.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: bdc: Fix an error handling path in 'bdc_probe()' when no suitable DMA config is available

[ Upstream commit d2f42e09393c774ab79088d8e3afcc62b3328fc9 ]

If no suitable DMA configuration is available, a previous 'bdc_phy_init()'
call must be undone by a corresponding 'bdc_phy_exit()' call.

Branch to the existing error handling path instead of returning
directly.

Fixes: cc29d4f67757 ("usb: bdc: Add support for USB phy")
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/0c5910979f39225d5d8fe68c9ab1c147c68ddee1.1629314734.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: ehci-orion: Handle errors of clk_prepare_enable() in probe

[ Upstream commit 4720f1bf4ee4a784d9ece05420ba33c9222a3004 ]

ehci_orion_drv_probe() did not account for possible errors of
clk_prepare_enable() that in particular could cause invocation of
clk_disable_unprepare() on clocks that were not prepared/enabled yet,
e.g. in remove or on handling errors of usb_add_hcd() in probe. Though,
there were several patches fixing different issues with clocks in this
driver, they did not solve this problem.

Add handling of errors of clk_prepare_enable() in ehci_orion_drv_probe()
to avoid calls of clk_disable_unprepare() without previous successful
invocation of clk_prepare_enable().

Found by Linux Driver Verification project (linuxtesting.org).

Fixes: 8c869edaee07 ("ARM: Orion: EHCI: Add support for enabling clocks")
Co-developed-by: Kirill Shilimanov <kirill.shilimanov@huawei.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Evgeny Novikov <novikov@ispras.ru>
Signed-off-by: Kirill Shilimanov <kirill.shilimanov@huawei.com>
Link: https://lore.kernel.org/r/20210825170902.11234-1-novikov@ispras.ru
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

octeontx2-pf: cn10k: Fix error return code in otx2_set_flowkey_cfg()

[ Upstream commit 5e8243e66b4d80eeaf9ed8cb0235ff133630a014 ]

If otx2_mbox_get_rsp() fails, otx2_set_flowkey_cfg() need return an
error code.

Fixes: e7938365459f ("octeontx2-pf: Fix algorithm index in MCAM rules with RSS action")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

i2c: xlp9xx: fix main IRQ check

[ Upstream commit 661e8a88e8317eb9ffe69c69d6cb4876370fe7e2 ]

Iff platform_get_irq() returns 0 for the main IRQ, the driver's probe()
method will return 0 early (as if the method's call was successful).
Let's consider IRQ0 valid for simplicity -- devm_request_irq() can always
override that decision...

Fixes: 2bbd681ba2b ("i2c: xlp9xx: Driver for Netlogic XLP9XX/5XX I2C controller")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Reviewed-by: George Cherian <george.cherian@marvell.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

i2c: mt65xx: fix IRQ check

[ Upstream commit 58fb7c643d346e2364404554f531cfa6a1a3917c ]

Iff platform_get_irq() returns 0, the driver's probe() method will return 0
early (as if the method's call was successful).  Let's consider IRQ0 valid
for simplicity -- devm_request_irq() can always override that decision...

Fixes: ce38815d39ea ("I2C: mediatek: Add driver for MediaTek I2C controller")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omprussia.ru>
Reviewed-by: Qii Wang <qii.wang@mediatek.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

CIFS: Fix a potencially linear read overflow

[ Upstream commit f980d055a0f858d73d9467bb0b570721bbfcdfb8 ]

strlcpy() reads the entire source buffer first. This read may exceed the
destination size limit. This is both inefficient and can lead to linear
read overflows if a source string is not NUL-terminated.

Also, the strnlen() call does not avoid the read overflow in the strlcpy
function when a not NUL-terminated string is passed.

So, replace this block by a call to kstrndup() that avoids this type of
overflow and does the same.

Fixes: 066ce6899484d ("cifs: rename cifs_strlcpy_to_host and make it use new functions")
Signed-off-by: Len Baker <len.baker@gmx.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

hv_utils: Set the maximum packet size for VSS driver to the length of the receive buffer

[ Upstream commit 9d68cd9120e4e3af38f843e165631c323b86b4e4 ]

Commit adae1e931acd ("Drivers: hv: vmbus: Copy packets sent by Hyper-V out
of the ring buffer") introduced a notion of maximum packet size and for
KVM and FCOPY drivers set it to the length of the receive buffer. VSS
driver wasn't updated, this means that the maximum packet size is now
VMBUS_DEFAULT_MAX_PKT_SIZE (4k). Apparently, this is not enough. I'm
observing a packet of 6304 bytes which is being truncated to 4096. When
VSS driver tries to read next packet from ring buffer it starts from the
wrong offset and receives garbage.

Set the maximum packet size to 'HV_HYP_PAGE_SIZE * 2' in VSS driver. This
matches the length of the receive buffer and is in line with other utils
drivers.

Fixes: adae1e931acd ("Drivers: hv: vmbus: Copy packets sent by Hyper-V out of the ring buffer")
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20210825133857.847866-1-vkuznets@redhat.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf: Fix possible out of bound write in narrow load handling

[ Upstream commit d7af7e497f0308bc97809cc48b58e8e0f13887e1 ]

Fix a verifier bug found by smatch static checker in [0].

This problem has never been seen in prod to my best knowledge. Fixing it
still seems to be a good idea since it's hard to say for sure whether
it's possible or not to have a scenario where a combination of
convert_ctx_access() and a narrow load would lead to an out of bound
write.

When narrow load is handled, one or two new instructions are added to
insn_buf array, but before it was only checked that

cnt >= ARRAY_SIZE(insn_buf)

And it's safe to add a new instruction to insn_buf[cnt++] only once. The
second try will lead to out of bound write. And this is what can happen
if `shift` is set.

Fix it by making sure that if the BPF_RSH instruction has to be added in
addition to BPF_AND then there is enough space for two more instructions
in insn_buf.

The full report [0] is below:

kernel/bpf/verifier.c:12304 convert_ctx_accesses() warn: offset 'cnt' incremented past end of array
kernel/bpf/verifier.c:12311 convert_ctx_accesses() warn: offset 'cnt' incremented past end of array

kernel/bpf/verifier.c
    12282
    12283  insn->off = off & ~(size_default - 1);
    12284  insn->code = BPF_LDX | BPF_MEM | size_code;
    12285  }
    12286
    12287  target_size = 0;
    12288  cnt = convert_ctx_access(type, insn, insn_buf, env->prog,
    12289   &target_size);
    12290  if (cnt == 0 || cnt >= ARRAY_SIZE(insn_buf) ||
                                        ^^^^^^^^^^^^^^^^^^^^^^^^^^^
Bounds check.

    12291      (ctx_field_size && !target_size)) {
    12292  verbose(env, "bpf verifier is misconfigured\n");
    12293  return -EINVAL;
    12294  }
    12295
    12296  if (is_narrower_load && size < target_size) {
    12297  u8 shift = bpf_ctx_narrow_access_offset(
    12298  off, size, size_default) * 8;
    12299  if (ctx_field_size <= 4) {
    12300  if (shift)
    12301  insn_buf[cnt++] = BPF_ALU32_IMM(BPF_RSH,
                                                         ^^^^^
increment beyond end of array

    12302  insn->dst_reg,
    12303  shift);
--> 12304  insn_buf[cnt++] = BPF_ALU32_IMM(BPF_AND, insn->dst_reg,
                                                 ^^^^^
out of bounds write

    12305  (1 << size * 8) - 1);
    12306  } else {
    12307  if (shift)
    12308  insn_buf[cnt++] = BPF_ALU64_IMM(BPF_RSH,
    12309  insn->dst_reg,
    12310  shift);
    12311  insn_buf[cnt++] = BPF_ALU64_IMM(BPF_AND, insn->dst_reg,
                                        ^^^^^^^^^^^^^^^
Same.

    12312  (1ULL << size * 8) - 1);
    12313  }
    12314  }
    12315
    12316  new_prog = bpf_patch_insn_data(env, i + delta, insn_buf, cnt);
    12317  if (!new_prog)
    12318  return -ENOMEM;
    12319
    12320  delta += cnt - 1;
    12321
    12322  /* keep walking new program and skip insns we just inserted */
    12323  env->prog = new_prog;
    12324  insn      = new_prog->insnsi + i + delta;
    12325  }
    12326
    12327  return 0;
    12328 }

[0] https://lore.kernel.org/bpf/20210817050843.GA21456@kili/

v1->v2:
- clarify that problem was only seen by static checker but not in prod;

Fixes: 46f53a65d2de ("bpf: Allow narrow loads with offset > 0")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210820163935.1902398-1-rdna@fb.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: wm_adsp: Put debugfs_remove_recursive back in

[ Upstream commit e6d0b92ac00b53121a35b2a1ce8d393dc9179fdf ]

This patch reverts commit acbf58e53041 ("ASoC: wm_adsp: Let
soc_cleanup_component_debugfs remove debugfs"), and adds an
alternate solution to the issue. That patch removes the call to
debugfs_remove_recursive, which cleans up the DSPs debugfs. The
intention was to avoid an unbinding issue on an out of tree
driver/platform.

The issue with the patch is it means the driver no longer cleans up
its own debugfs, instead relying on ASoC to remove recurive on the
parent debugfs node. This is conceptually rather unclean, but also it
would prevent DSPs being added/removed independently of ASoC and soon
we are going to be upstreaming some non-audio parts with these DSPs,
which will require this.

Finally, it seems the issue on the platform is a result of the
wm_adsp2_cleanup_debugfs getting called twice. This is very likely a
problem on the platform side and will be resolved there. But in the mean
time make the code a little more robust to such issues, and again
conceptually a bit nicer, but clearing the debugfs_root variable in the
DSP structure when the debugfs is removed.

Fixes: acbf58e53041 ("ASoC: wm_adsp: Let soc_cleanup_component_debugfs remove debugfs"
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210824101552.1119-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mmc: moxart: Fix issue with uninitialized dma_slave_config

[ Upstream commit ee5165354d498e5bceb0b386e480ac84c5f8c28c ]

Depending on the DMA driver being used, the struct dma_slave_config may
need to be initialized to zero for the unused data.

For example, we have three DMA drivers using src_port_window_size and
dst_port_window_size. If these are left uninitialized, it can cause DMA
failures.

For moxart, this is probably not currently an issue but is still good to
fix though.

Fixes: 1b66e94e6b99 ("mmc: moxart: Add MOXA ART SD/MMC driver")
Cc: Jonas Jensen <jonas.jensen@gmail.com>
Cc: Vinod Koul <vkoul@kernel.org>
Cc: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20210810081644.19353-3-tony@atomide.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mmc: dw_mmc: Fix issue with uninitialized dma_slave_config

[ Upstream commit c3ff0189d3bc9c03845fe37472c140f0fefd0c79 ]

Depending on the DMA driver being used, the struct dma_slave_config may
need to be initialized to zero for the unused data.

For example, we have three DMA drivers using src_port_window_size and
dst_port_window_size. If these are left uninitialized, it can cause DMA
failures.

For dw_mmc, this is probably not currently an issue but is still good to
fix though.

Fixes: 3fc7eaef44db ("mmc: dw_mmc: Add external dma interface support")
Cc: Shawn Lin <shawn.lin@rock-chips.com>
Cc: Jaehoon Chung <jh80.chung@samsung.com>
Cc: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Cc: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20210810081644.19353-2-tony@atomide.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mmc: sdhci: Fix issue with uninitialized dma_slave_config

[ Upstream commit 522654d534d315d540710124c57b49ca22ac5f72 ]

Depending on the DMA driver being used, the struct dma_slave_config may
need to be initialized to zero for the unused data.

For example, we have three DMA drivers using src_port_window_size and
dst_port_window_size. If these are left uninitialized, it can cause DMA
failures at least if external TI SDMA is ever configured for sdhci.

For other external DMA cases, this is probably not currently an issue but
is still good to fix though.

Fixes: 18e762e3b7a7 ("mmc: sdhci: add support for using external DMA devices")
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Chunyan Zhang <zhang.chunyan@linaro.org>
Cc: Faiz Abbas <faiz_abbas@ti.com>
Cc: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Cc: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Link: https://lore.kernel.org/r/20210810081644.19353-1-tony@atomide.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: Intel: Skylake: Fix module resource and format selection

[ Upstream commit e8b374b649afe756c2470e0e6668022e90bf8518 ]

Module configuration may differ between its instances depending on
resources required and input and output audio format. Available
parameters to select from are stored in module resource and interface
(format) lists. These come from topology, together with description of
each of pipe's modules.

Ignoring index value provided by topology and relying always on 0th
entry leads to unexpected module behavior due to under/overbudged
resources assigned or impropper format selection. Fix by taking entry at
index specified by topology.

Fixes: f6fa56e22559 ("ASoC: Intel: Skylake: Parse and update module config structure")
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Tested-by: Lukasz Majczak <lma@semihalf.com>
Link: https://lore.kernel.org/r/20210818075742.1515155-5-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: Intel: Skylake: Leave data as is when invoking TLV IPCs

[ Upstream commit 126b3422adc80f29d2129db7f61e0113a8a526c6 ]

Advancing pointer initially fixed issue for some users but caused
regression for others. Leave data as it to make it easier for end users
to adjust their topology files if needed.

Fixes: a8cd7066f042 ("ASoC: Intel: Skylake: Strip T and L from TLV IPCs")
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Tested-by: Lukasz Majczak <lma@semihalf.com>
Link: https://lore.kernel.org/r/20210818075742.1515155-3-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: Intel: kbl_da7219_max98927: Fix format selection for max98373

[ Upstream commit 6d41bbf2fd3615c56dbf2b67f6cbf9e83d14a2e2 ]

Contrary to what is said in board's file, topology targeting
kbl_da7219_max98373 expects format 16b, not 24/32b. Partially revert
changes added in 'ASoC: Intel: Boards: Add Maxim98373 support' to bring
old behavior back, aligning with topology expectations.

Fixes: 716d53cc7837 ("ASoC: Intel: Boards: Add Maxim98373 support")
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Tested-by: Lukasz Majczak <lma@semihalf.com>
Link: https://lore.kernel.org/r/20210818075742.1515155-2-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

m68k: coldfire: return success for clk_enable(NULL)

[ Upstream commit f6a4f0b424df957d84fa7b9f2d02981234ff5828 ]

The clk_enable is supposed work when CONFIG_HAVE_CLK is false, but it
returns -EINVAL.  That means some drivers fail during probe.

[    1.680000] flexcan: probe of flexcan.0 failed with error -22

Fixes: c1fb1bf64bb6 ("m68k: let clk_enable() return immediately if clk is NULL")
Fixes: bea8bcb12da0 ("m68knommu: Add support for the Coldfire m5441x.")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

octeontx2-af: cn10k: Use FLIT0 register instead of FLIT1

[ Upstream commit 623da5ca70b70f01cd483585f5cd4c463cf2f2da ]

RVU SMMU widget stores the final translated PA at
RVU_AF_SMMU_TLN_FLIT0<57:18> instead of FLIT1 register. This patch
fixes the address translation logic to use the correct register.

Fixes: 893ae97214c3 ("octeontx2-af: cn10k: Support configurable LMTST regions")
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

octeontx2-pf: Fix algorithm index in MCAM rules with RSS action

[ Upstream commit e7938365459f3a6d4edf212f435c4ad635621450 ]

Otherthan setting action as RSS in NPC MCAM entry, RSS flowkey
algorithm index also needs to be set. Otherwise whatever algorithm
is defined at flowkey index '0' will be considered by HW and pkt
flows will be distributed as such.

Fix this by saving the flowkey index sent by admin function while
initializing RSS and then use it when framing MCAM rules.

Fixes: 81a4362016e7 ("octeontx2-pf: Add RSS multi group support")
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

octeontx2-pf: Don't install VLAN offload rule if netdev is down

[ Upstream commit 05209e3570e452cdaa644e8398a8875b6a91051d ]

Whenever user changes interface MAC address both default DMAC based
MCAM rule and VLAN offload (for strip) rules are updated with new
MAC address. To update or install VLAN offload rule PF driver needs
interface's receive channel info, which is retrieved from admin
function at the time of NIXLF initialization.

If user changes MAC address before interface is UP, VLAN offload rule
installation will fail and throw error as receive channel is not valid.
To avoid this, skip VLAN offload rule installation if netdev is not UP.
This rule will anyway be reinslatted as part of open() call.

Fixes: fd9d7859db6c ("octeontx2-pf: Implement ingress/egress VLAN offload")
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

octeontx2-af: Check capability flag while freeing ipolicer memory

[ Upstream commit 07cccffdbdd37820ba13c645af8e74a78a266557 ]

Bandwidth profiles (ipolicer structure)is implemented only on CN10K
platform. But current code try to free the ipolicer memory without
checking the capibility flag leading to driver crash on OCTEONTX2
platform. This patch fixes the issue by add capability flag check.

Fixes: e8e095b3b3700 ("octeontx2-af: cn10k: Bandwidth profiles config support")
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

octeontx2-pf: send correct vlan priority mask to npc_install_flow_req

[ Upstream commit 10df5a13ac6785b409ad749c4b10d4b220cc7e71 ]

This patch corrects the erroneous vlan priority mask field that was
send to npc_install_flow_req.

Fixes: 1d4d9e42c240 ("octeontx2-pf: Add tc flower hardware offload on ingress traffic")
Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

octeontx2-af: cn10k: Fix SDP base channel number

[ Upstream commit 477b53f3f95ba5341b4320f8b7a92cedc5a67650 ]

As per hardware the base channel number configured
for programmable channels of a block must be multiple
of number of channels of that block. This condition
is not met for SDP base channel currently. Hence this
patch ensures all the base channel numbers of all
blocks are multiple of number of channels present in
the blocks. Also instead of hardcoding SDP number
of channels the same is read from the NIX_AF_CONST1
register.

Fixes: 242da439214b ("octeontx2-af: cn10k: Add support for programmable")
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

rsi: fix an error code in rsi_probe()

[ Upstream commit 9adcdf6758d7c4c9bdaf22d78eb9fcae260ed113 ]

Return -ENODEV instead of success for unsupported devices.

Fixes: 54fdb318c111 ("rsi: add new device model for 9116")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210816183947.GA2119@kili
Signed-off-by: Sasha Levin <sashal@kernel.org>

rsi: fix error code in rsi_load_9116_firmware()

[ Upstream commit d0f8430332a16c7baa80ce2886339182c5d85f37 ]

This code returns success if the kmemdup() fails, but obviously it
should return -ENOMEM instead.

Fixes: e5a1ecc97e5f ("rsi: add firmware loading for 9116 device")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210805103746.GA26417@kili
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/exynos: g2d: fix missing unlock on error in g2d_runqueue_worker()

[ Upstream commit b74a29fac6de62f39b594e8f545b3a26db7edb5e ]

Add the missing unlock before return from function g2d_runqueue_worker()
in the error handling case.

Fixes: 445d3bed75de ("drm/exynos: use pm_runtime_resume_and_get()")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

gfs2: init system threads before freeze lock

[ Upstream commit a28dc123fa66ba7f3eca7cffc4b01d96bfd35c27 ]

Patch 96b1454f2e ("gfs2: move freeze glock outside the make_fs_rw and _ro
functions") changed the gfs2 mount sequence so that it holds the freeze
lock before calling gfs2_make_fs_rw. Before this patch, gfs2_make_fs_rw
called init_threads to initialize the quotad and logd threads. That is a
problem if the system needs to withdraw due to IO errors early in the
mount sequence, for example, while initializing the system statfs inode:

1. An IO error causes the statfs glock to not sync properly after
   recovery, and leaves items on the ail list.
2. The leftover items on the ail list causes its do_xmote call to fail,
   which makes it want to withdraw. But since the glock code cannot
   withdraw (because the withdraw sequence uses glocks) it relies upon
   the logd daemon to initiate the withdraw.
3. The withdraw can never be performed by the logd daemon because all
   this takes place before the logd daemon is started.

This patch moves function init_threads from super.c to ops_fstype.c
and it changes gfs2_fill_super to start its threads before holding the
freeze lock, and if there's an error, stop its threads after releasing
it. This allows the logd to run unblocked by the freeze lock. Thus,
the logd daemon can perform its withdraw sequence properly.

Fixes: 96b1454f2e8e ("gfs2: move freeze glock outside the make_fs_rw and _ro functions")
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

i2c: hix5hd2: fix IRQ check

[ Upstream commit f9b459c2ba5edfe247e86b45ad5dea8da542f3ea ]

Iff platform_get_irq() returns 0, the driver's probe() method will return 0
early (as if the method's call was successful).  Let's consider IRQ0 valid
for simplicity -- devm_request_irq() can always override that decision...

Fixes: 15ef27756b23 ("i2c: hix5hd2: add i2c controller driver")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

i2c: s3c2410: fix IRQ check

[ Upstream commit d6840a5e370b7ea4fde16ce2caf431bcc87f9a75 ]

Iff platform_get_irq() returns 0, the driver's probe() method will return 0
early (as if the method's call was successful).  Let's consider IRQ0 valid
for simplicity -- devm_request_irq() can always override that decision...

Fixes: e0d1ec97853f ("i2c-s3c2410: Change IRQ to be plain integer.")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

i2c: iop3xx: fix deferred probing

[ Upstream commit a1299505162ad00def3573260c2c68b9c8e8d697 ]

When adding the code to handle platform_get_irq*() errors in the commit
489447380a29 ("handle errors returned by platform_get_irq*()"), the
actual error code was enforced to be -ENXIO in the driver for some
strange reason.  This didn't matter much until the deferred probing was
introduced -- which requires an actual error code to be propagated
upstream from the failure site.

While fixing this, also stop overriding the errors from request_irq() to
-EIO (done since the pre-git era).

Fixes: 489447380a29 ("[PATCH] handle errors returned by platform_get_irq*()")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Bluetooth: add timeout sanity check to hci_inquiry

[ Upstream commit f41a4b2b5eb7872109723dab8ae1603bdd9d9ec1 ]

Syzbot hit "task hung" bug in hci_req_sync(). The problem was in
unreasonable huge inquiry timeout passed from userspace.
Fix it by adding sanity check for timeout value to hci_inquiry().

Since hci_inquiry() is the only user of hci_req_sync() with user
controlled timeout value, it makes sense to check timeout value in
hci_inquiry() and don't touch hci_req_sync().

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-and-tested-by: syzbot+be2baed593ea56c6a84c@syzkaller.appspotmail.com
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

lkdtm: replace SCSI_DISPATCH_CMD with SCSI_QUEUE_RQ

[ Upstream commit d1f278da6b11585f05b2755adfc8851cbf14a1ec ]

When scsi_dispatch_cmd was moved to scsi_lib.c and made static, some
compilers (i.e., at least gcc 8.4.0) decided to compile this
inline. This is a problem for lkdtm.ko, which inserted a kprobe
on this function for the SCSI_DISPATCH_CMD crashpoint.

Move this crashpoint one function up the call chain to
scsi_queue_rq. Though this is also a static function, it should never be
inlined because it is assigned as a structure entry. Therefore,
kprobe_register should always be able to find it.

Fixes: 82042a2cdb55 ("scsi: move scsi_dispatch_cmd to scsi_lib.c")
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kevin Mitchell <kevmitch@arista.com>
Link: https://lore.kernel.org/r/20210819022940.561875-2-kevmitch@arista.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mm/swap: consider max pages in iomap_swapfile_add_extent

[ Upstream commit 36ca7943ac18aebf8aad4c50829eb2ea5ec847df ]

When the max pages (last_page in the swap header + 1) is smaller than
the total pages (inode size) of the swapfile, iomap_swapfile_activate
overwrites sis->max with total pages.

However, frontswap_map is a swap page state bitmap allocated using the
initial sis->max page count read from the swap header.  If swapfile
activation increases sis->max, it's possible for the frontswap code to
walk off the end of the bitmap, thereby corrupting kernel memory.

[djwong: modify the description a bit; the original paragraph reads:

"However, frontswap_map is allocated using max pages. When test and clear
the sis offset, which is larger than max pages, of frontswap_map in
__frontswap_invalidate_page(), neighbors of frontswap_map may be
overwritten, i.e., slab is polluted."

Note also that this bug resulted in a behavioral change: activating a
swap file that was formatted and later extended results in all pages
being activated, not the number of pages recorded in the swap header.]

This fixes the issue by considering the limitation of max pages of swap
info in iomap_swapfile_add_extent().

To reproduce the case, compile kernel with slub RED ZONE, then run test:
$ sudo stress-ng -a 1 -x softlockup,resources -t 72h --metrics --times \
 --verify -v -Y /root/tmpdir/stress-ng/stress-statistic-12.yaml \
 --log-file /root/tmpdir/stress-ng/stress-logfile-12.txt \
 --temp-path /root/tmpdir/stress-ng/

We'll get the error log as below:

[ 1151.015141] =============================================================================
[ 1151.016489] BUG kmalloc-16 (Not tainted): Right Redzone overwritten
[ 1151.017486] -----------------------------------------------------------------------------
[ 1151.017486]
[ 1151.018997] Disabling lock debugging due to kernel taint
[ 1151.019873] INFO: 0x0000000084e43932-0x0000000098d17cae @offset=7392. First byte 0x0 instead of 0xcc
[ 1151.021303] INFO: Allocated in __do_sys_swapon+0xcf6/0x1170 age=43417 cpu=9 pid=3816
[ 1151.022538]  __slab_alloc+0xe/0x20
[ 1151.023069]  __kmalloc_node+0xfd/0x4b0
[ 1151.023704]  __do_sys_swapon+0xcf6/0x1170
[ 1151.024346]  do_syscall_64+0x33/0x40
[ 1151.024925]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 1151.025749] INFO: Freed in put_cred_rcu+0xa1/0xc0 age=43424 cpu=3 pid=2041
[ 1151.026889]  kfree+0x276/0x2b0
[ 1151.027405]  put_cred_rcu+0xa1/0xc0
[ 1151.027949]  rcu_do_batch+0x17d/0x410
[ 1151.028566]  rcu_core+0x14e/0x2b0
[ 1151.029084]  __do_softirq+0x101/0x29e
[ 1151.029645]  asm_call_irq_on_stack+0x12/0x20
[ 1151.030381]  do_softirq_own_stack+0x37/0x40
[ 1151.031037]  do_softirq.part.15+0x2b/0x30
[ 1151.031710]  __local_bh_enable_ip+0x4b/0x50
[ 1151.032412]  copy_fpstate_to_sigframe+0x111/0x360
[ 1151.033197]  __setup_rt_frame+0xce/0x480
[ 1151.033809]  arch_do_signal+0x1a3/0x250
[ 1151.034463]  exit_to_user_mode_prepare+0xcf/0x110
[ 1151.035242]  syscall_exit_to_user_mode+0x27/0x190
[ 1151.035970]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 1151.036795] INFO: Slab 0x000000003b9de4dc objects=44 used=9 fp=0x00000000539e349e flags=0xfffffc0010201
[ 1151.038323] INFO: Object 0x000000004855ba01 @offset=7376 fp=0x0000000000000000
[ 1151.038323]
[ 1151.039683] Redzone  000000008d0afd3d: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc  ................
[ 1151.041180] Object   000000004855ba01: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
[ 1151.042714] Redzone  0000000084e43932: 00 00 00 c0 cc cc cc cc                          ........
[ 1151.044120] Padding  000000000864c042: 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a  ZZZZZZZZZZZZZZZZ
[ 1151.045615] CPU: 5 PID: 3816 Comm: stress-ng Tainted: G    B             5.10.50+ #7
[ 1151.046846] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014
[ 1151.048633] Call Trace:
[ 1151.049072]  dump_stack+0x57/0x6a
[ 1151.049585]  check_bytes_and_report+0xed/0x110
[ 1151.050320]  check_object+0x1eb/0x290
[ 1151.050924]  ? __x64_sys_swapoff+0x39a/0x540
[ 1151.051646]  free_debug_processing+0x151/0x350
[ 1151.052333]  __slab_free+0x21a/0x3a0
[ 1151.052938]  ? _cond_resched+0x2d/0x40
[ 1151.053529]  ? __vunmap+0x1de/0x220
[ 1151.054139]  ? __x64_sys_swapoff+0x39a/0x540
[ 1151.054796]  ? kfree+0x276/0x2b0
[ 1151.055307]  kfree+0x276/0x2b0
[ 1151.055832]  __x64_sys_swapoff+0x39a/0x540
[ 1151.056466]  do_syscall_64+0x33/0x40
[ 1151.057084]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 1151.057866] RIP: 0033:0x150340b0ffb7
[ 1151.058481] Code: Unable to access opcode bytes at RIP 0x150340b0ff8d.
[ 1151.059537] RSP: 002b:00007fff7f4ee238 EFLAGS: 00000246 ORIG_RAX: 00000000000000a8
[ 1151.060768] RAX: ffffffffffffffda RBX: 00007fff7f4ee66c RCX: 0000150340b0ffb7
[ 1151.061904] RDX: 000000000000000a RSI: 0000000000018094 RDI: 00007fff7f4ee860
[ 1151.063033] RBP: 00007fff7f4ef980 R08: 0000000000000000 R09: 0000150340a672bd
[ 1151.064135] R10: 00007fff7f4edca0 R11: 0000000000000246 R12: 0000000000018094
[ 1151.065253] R13: 0000000000000005 R14: 000000000160d930 R15: 00007fff7f4ee66c
[ 1151.066413] FIX kmalloc-16: Restoring 0x0000000084e43932-0x0000000098d17cae=0xcc
[ 1151.066413]
[ 1151.067890] FIX kmalloc-16: Object at 0x000000004855ba01 not freed

Fixes: 67482129cdab ("iomap: add a swapfile activation function")
Fixes: a45c0eccc564 ("iomap: move the swapfile code into a separate file")
Signed-off-by: Gang Deng <gavin.dg@linux.alibaba.com>
Signed-off-by: Xu Yu <xuyu@linux.alibaba.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: gadget: mv_u3d: request_irq() after initializing UDC

[ Upstream commit 2af0c5ffadaf9d13eca28409d4238b4e672942d3 ]

If IRQ occurs between calling  request_irq() and  mv_u3d_eps_init(),
then null pointer dereference occurs since u3d->eps[] wasn't
initialized yet but used in mv_u3d_nuke().

The patch puts registration of the interrupt handler after
initializing of neccesery data.

Found by Linux Driver Verification project (linuxtesting.org).

Fixes: 90fccb529d24 ("usb: gadget: Gadget directory cleanup - group UDC drivers")
Acked-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Nadezda Lutovinova <lutovinova@ispras.ru>
Link: https://lore.kernel.org/r/20210818141247.4794-1-lutovinova@ispras.ru
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

firmware: raspberrypi: Fix a leak in 'rpi_firmware_get()'

[ Upstream commit 09cbd1df7d2615c19e40facbe31fdcb5f1ebfa96 ]

The reference taken by 'of_find_device_by_node()' must be released when
not needed anymore.

Add the corresponding 'put_device()' in the normal and error handling
paths.

Fixes: 4e3d60656a72 ("ARM: bcm2835: Add the Raspberry Pi firmware driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/5e17e5409b934cd08bf6f9279c73be5c1cb11cce.1628232242.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: fsl_rpmsg: Check -EPROBE_DEFER for getting clocks

[ Upstream commit 2fbbcffea5b6adbfe90ffc842a6b3eb2d7e381ed ]

The devm_clk_get() may return -EPROBE_DEFER, then clocks
will be assigned to NULL wrongly. As the clocks are
optional so we can use devm_clk_get_optional() instead of
devm_clk_get().

Fixes: b73d9e6225e8 ("ASoC: fsl_rpmsg: Add CPU DAI driver for audio base on rpmsg")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1629266614-6942-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

hwmon: remove amd_energy driver in Makefile

[ Upstream commit b3a7ab2d4376726178909e27b6956c012277ac4e ]

Commit 9049572fb145 ("hwmon: Remove amd_energy driver") removes the driver,
but misses to adjust the Makefile.

Hence, ./scripts/checkkconfigsymbols.py warns:

SENSORS_AMD_ENERGY
Referencing files: drivers/hwmon/Makefile

Remove the missing piece of this driver removal.

Fixes: 9049572fb145 ("hwmon: Remove amd_energy driver")
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Link: https://lore.kernel.org/r/20210817084811.10673-1-lukas.bulwahn@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

hwmon: (pmbus/bpa-rs600) Don't use rated limits as warn limits

[ Upstream commit 7a8c68c57fd09541377f6971f25efdeb9a926c37 ]

In the initial implementation a number of PMBUS_x_WARN_LIMITs were
mapped to MFR fields. This was incorrect as these MFR limits reflect the
rated limit as opposed to a limit which will generate warning. Instead
return -ENXIO like we were already doing for other WARN_LIMITs.

Subsequently these rated limits have been exposed generically as new
fields in the sysfs ABI so the values are still available.

Fixes: 15b2703e5e02 ("hwmon: (pmbus) Add driver for BluTek BPA-RS600")
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Link: https://lore.kernel.org/r/20210812014000.26293-2-chris.packham@alliedtelesis.co.nz
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

i2c: synquacer: fix deferred probing

[ Upstream commit 8d744da241b81f4211f4813b0d3c1981326fa9ca ]

The driver overrides the error codes returned by platform_get_irq() to
-ENODEV, so if it returns -EPROBE_DEFER, the driver will fail the probe
permanently instead of the deferred probing. Switch to propagating the
error codes upstream.

Fixes: 0d676a6c4390 ("i2c: add support for Socionext SynQuacer I2C controller")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omprussia.ru>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: staging: correct reference to config IOMEM to config HAS_IOMEM

[ Upstream commit cbfa6f33e3a685c329d78e06b0cf1dcb23c9d849 ]

Commit 0a0a66c984b3 ("clk: staging: Specify IOMEM dependency for Xilinx
Clocking Wizard driver") introduces a dependency on the non-existing config
IOMEM, which basically makes it impossible to include this driver into any
build. Fortunately, ./scripts/checkkconfigsymbols.py warns:

IOMEM
Referencing files: drivers/staging/clocking-wizard/Kconfig

The config for IOMEM support is called HAS_IOMEM. Correct this reference to
the intended config.

Fixes: 0a0a66c984b3 ("clk: staging: Specify IOMEM dependency for Xilinx Clocking Wizard driver")
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Link: https://lore.kernel.org/r/20210817105404.13146-1-lukas.bulwahn@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: marvell: armada-37xx: Extend PCIe MEM space

[ Upstream commit 514ef1e62d6521c2199d192b1c71b79d2aa21d5a ]

Current PCIe MEM space of size 16 MB is not enough for some combination
of PCIe cards (e.g. NVMe disk together with ath11k wifi card). ARM Trusted
Firmware for Armada 3700 platform already assigns 128 MB for PCIe window,
so extend PCIe MEM space to the end of 128 MB PCIe window which allows to
allocate more PCIe BARs for more PCIe cards.

Without this change some combination of PCIe cards cannot be used and
kernel show error messages in dmesg during initialization:

    pci 0000:00:00.0: BAR 8: no space for [mem size 0x01800000]
    pci 0000:00:00.0: BAR 8: failed to assign [mem size 0x01800000]
    pci 0000:00:00.0: BAR 6: assigned [mem 0xe8000000-0xe80007ff pref]
    pci 0000:01:00.0: BAR 8: no space for [mem size 0x01800000]
    pci 0000:01:00.0: BAR 8: failed to assign [mem size 0x01800000]
    pci 0000:02:03.0: BAR 8: no space for [mem size 0x01000000]
    pci 0000:02:03.0: BAR 8: failed to assign [mem size 0x01000000]
    pci 0000:02:07.0: BAR 8: no space for [mem size 0x00100000]
    pci 0000:02:07.0: BAR 8: failed to assign [mem size 0x00100000]
    pci 0000:03:00.0: BAR 0: no space for [mem size 0x01000000 64bit]
    pci 0000:03:00.0: BAR 0: failed to assign [mem size 0x01000000 64bit]

Due to bugs in U-Boot port for Turris Mox, the second range in Turris Mox
kernel DTS file for PCIe must start at 16 MB offset. Otherwise U-Boot
crashes during loading of kernel DTB file. This bug is present only in
U-Boot code for Turris Mox and therefore other Armada 3700 devices are not
affected by this bug. Bug is fixed in U-Boot version 2021.07.

To not break booting new kernels on existing versions of U-Boot on Turris
Mox, use first 16 MB range for IO and second range with rest of PCIe window
for MEM.

Signed-off-by: Pali Rohár <pali@kernel.org>
Fixes: 76f6386b25cc ("arm64: dts: marvell: Add Aardvark PCIe support for Armada 3700")
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nfsd4: Fix forced-expiry locking

[ Upstream commit f7104cc1a9159cd0d3e8526cb638ae0301de4b61 ]

This should use the network-namespace-wide client_lock, not the
per-client cl_lock.

You shouldn't see any bugs unless you're actually using the
forced-expiry interface introduced by 89c905beccbb.

Fixes: 89c905beccbb "nfsd: allow forced expiration of NFSv4 clients"
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

SUNRPC: Fix a NULL pointer deref in trace_svc_stats_latency()

[ Upstream commit 5c11720767f70d34357d00a15ba5a0ad052c40fe ]

Some paths through svc_process() leave rqst->rq_procinfo set to
NULL, which triggers a crash if tracing happens to be enabled.

Fixes: 89ff87494c6e ("SUNRPC: Display RPC procedure names instead of proc numbers")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

lockd: Fix invalid lockowner cast after vfs_test_lock

[ Upstream commit cd2d644ddba183ec7b451b7c20d5c7cc06fcf0d7 ]

After calling vfs_test_lock() the pointer to a conflicting lock can be
returned, and that lock is not guarunteed to be owned by nlm.  In that
case, we cannot cast it to struct nlm_lockowner.  Instead return the pid
of that conflicting lock.

Fixes: 646d73e91b42 ("lockd: Show pid of lockd for remote locks")
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

locking/local_lock: Add missing owner initialization

[ Upstream commit d8bbd97ad0b99a9394f2cd8410b884c48e218cf0 ]

If CONFIG_DEBUG_LOCK_ALLOC=y is enabled then local_lock_t has an 'owner'
member which is checked for consistency, but nothing initialized it to
zero explicitly.

The static initializer does so implicit, and the run time allocated per CPU
storage is usually zero initialized as well, but relying on that is not
really good practice.

Fixes: 91710728d172 ("locking: Introduce local_lock()")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20210815211301.969975279@linutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>

mac80211: Fix insufficient headroom issue for AMSDU

[ Upstream commit f50d2ff8f016b79a2ff4acd5943a1eda40c545d4 ]

ieee80211_amsdu_realloc_pad() fails to account for extra_tx_headroom,
the original reserved headroom might be eaten. Add the necessary
extra_tx_headroom.

Fixes: 6e0456b54545 ("mac80211: add A-MSDU tx support")
Signed-off-by: Chih-Kang Chang <gary.chang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://lore.kernel.org/r/20210816085128.10931-2-pkshih@realtek.com
[fix indentation]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

libbpf: Re-build libbpf.so when libbpf.map changes

[ Upstream commit 61c7aa5020e98ac2fdcf07d07eec1baf2e9f0a08 ]

Ensure libbpf.so is re-built whenever libbpf.map is modified.  Without this,
changes to libbpf.map are not detected and versioned symbols mismatch error
will be reported until `make clean && make` is used, which is a suboptimal
developer experience.

Fixes: 306b267cb3c4 ("libbpf: Verify versioned symbols")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210815070609.987780-8-andrii@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: phy: tahvo: add IRQ check

[ Upstream commit 0d45a1373e669880b8beaecc8765f44cb0241e47 ]

The driver neglects to check the result of platform_get_irq()'s call and
blithely passes the negative error codes to request_threaded_irq() (which
takes *unsigned* IRQ #), causing it to fail with -EINVAL, overriding an
original error code.  Stop calling request_threaded_irq() with the invalid
IRQ #s.

Fixes: 9ba96ae5074c ("usb: omap1: Tahvo USB transceiver driver")
Acked-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Link: https://lore.kernel.org/r/8280d6a4-8e9a-7cfe-1aa9-db586dc9afdf@omp.ru
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: host: ohci-tmio: add IRQ check

[ Upstream commit 4ac5132e8a4300637a2da8f5d6bc7650db735b8a ]

The driver neglects to check the  result of platform_get_irq()'s call and
blithely passes the negative error codes to usb_add_hcd() (which takes
*unsigned* IRQ #), causing request_irq() that it calls to fail with
-EINVAL, overriding an original error code. Stop calling usb_add_hcd()
with the invalid IRQ #s.

Fixes: 78c73414f4f6 ("USB: ohci: add support for tmio-ohci cell")
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Link: https://lore.kernel.org/r/402e1a45-a0a4-0e08-566a-7ca1331506b1@omp.ru
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

PM: cpu: Make notifier chain use a raw_spinlock_t

[ Upstream commit b2f6662ac08d0e7c25574ce53623c71bdae9dd78 ]

Invoking atomic_notifier_chain_notify() requires acquiring a spinlock_t,
which can block under CONFIG_PREEMPT_RT. Notifications for members of the
cpu_pm notification chain will be issued by the idle task, which can never
block.

Making *all* atomic_notifiers use a raw_spinlock is too big of a hammer, as
only notifications issued by the idle task are problematic.

Special-case cpu_pm_notifier_chain by kludging a raw_notifier and
raw_spinlock_t together, matching the atomic_notifier behavior with a
raw_spinlock_t.

Fixes: 70d932985757 ("notifier: Fix broken error handling pattern")
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Bluetooth: Move shutdown callback before flushing tx and rx queue

[ Upstream commit 0ea53674d07fb6db2dd7a7ec2fdc85a12eb246c2 ]

Commit 0ea9fd001a14 ("Bluetooth: Shutdown controller after workqueues
are flushed or cancelled") introduced a regression that makes mtkbtsdio
driver stops working:
[   36.593956] Bluetooth: hci0: Firmware already downloaded
[   46.814613] Bluetooth: hci0: Execution of wmt command timed out
[   46.814619] Bluetooth: hci0: Failed to send wmt func ctrl (-110)

The shutdown callback depends on the result of hdev->rx_work, so we
should call it before flushing rx_work:
-> btmtksdio_shutdown()
 -> mtk_hci_wmt_sync()
  -> __hci_cmd_send()
   -> wait for BTMTKSDIO_TX_WAIT_VND_EVT gets cleared

-> btmtksdio_recv_event()
 -> hci_recv_frame()
  -> queue_work(hdev->workqueue, &hdev->rx_work)
   -> clears BTMTKSDIO_TX_WAIT_VND_EVT

So move the shutdown callback before flushing TX/RX queue to resolve the
issue.

Reported-and-tested-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Tested-by: Hsin-Yi Wang <hsinyi@chromium.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Fixes: 0ea9fd001a14 ("Bluetooth: Shutdown controller after workqueues are flushed or cancelled")
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: stmmac: fix INTR TBU status affecting irq count statistic

[ Upstream commit 1975df880b959e30f28d66148a12d77b458abd76 ]

DMA channel status "Transmit buffer unavailable(TBU)" bit is not
considered as a successful dma tx. Hence, it should not affect
all the irq count statistic.

Fixes: 1103d3a5531c ("net: stmmac: dwmac4: Also use TBU interrupt to clean TX path")
Signed-off-by: Voon Weifeng <weifeng.voon@intel.com>
Signed-off-by: Vijayakannan Ayyathurai <vijayakannan.ayyathurai@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

samples: pktgen: add missing IPv6 option to pktgen scripts

[ Upstream commit 0f0c4f1b72e090b23131700bb155944cc28b2a7b ]

Currently, "sample04" and "sample05" are not working properly when
running with an IPv6 option("-6"). The commit 0f06a6787e05 ("samples:
Add an IPv6 "-6" option to the pktgen scripts") has omitted the addition
of this option at "sample04" and "sample05".

In order to support IPv6 option, this commit adds logic related to IPv6
option.

Fixes: 0f06a6787e05 ("samples: Add an IPv6 "-6" option to the pktgen scripts")
Signed-off-by: Juhee Kang <claudiajkang@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

devlink: Clear whole devlink_flash_notify struct

[ Upstream commit ed43fbac717882165a2a4bd64f7b1f56f7467bb7 ]

The { 0 } doesn't clear all fields in the struct, but tells to the
compiler to set all fields to zero and doesn't touch any sub-fields
if they exists.

The {} is an empty initialiser that instructs to fully initialize whole
struct including sub-fields, which is error-prone for future
devlink_flash_notify extensions.

Fixes: 6700acc5f1fe ("devlink: collect flash notify params into a struct")
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests/bpf: Fix test_core_autosize on big-endian machines

[ Upstream commit d164dd9a5c08c16a883b3de97d13948c7be7fa4d ]

The "probed" part of test_core_autosize copies an integer using
bpf_core_read() into an integer of a potentially different size.
On big-endian machines a destination offset is required for this to
produce a sensible result.

Fixes: 888d83b961f6 ("selftests/bpf: Validate libbpf's auto-sizing of LD/ST/STX instructions")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210812224814.187460-1-iii@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: gadget: udc: renesas_usb3: Fix soc_device_match() abuse

[ Upstream commit cea45a3bd2dd4d9c35581328f571afd32b3c9f48 ]

soc_device_match() is intended as a last resort, to handle e.g. quirks
that cannot be handled by matching based on a compatible value.

As the device nodes for the Renesas USB 3.0 Peripheral Controller on
R-Car E3 and RZ/G2E do have SoC-specific compatible values, the latter
can and should be used to match against these devices.

This also fixes support for the USB 3.0 Peripheral Controller on the
R-Car E3e (R8A779M6) SoC, which is a different grading of the R-Car E3
(R8A77990) SoC, using the same SoC-specific compatible value.

Fixes: 30025efa8b5e75f5 ("usb: gadget: udc: renesas_usb3: add support for r8a77990")
Fixes: 546970fdab1da5fe ("usb: gadget: udc: renesas_usb3: add support for r8a774c0")
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/760981fb4cd110d7cbfc9dcffa365e7c8b25c6e5.1628696960.git.geert+renesas@glider.be
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: phy: twl6030: add IRQ checks

[ Upstream commit 0881e22c06e66af0b64773c91c8868ead3d01aa1 ]

The driver neglects to check the result of platform_get_irq()'s calls and
blithely passes the negative error codes to request_threaded_irq() (which
takes *unsigned* IRQ #), causing them both to fail with -EINVAL, overriding
an original error code.  Stop calling request_threaded_irq() with the
invalid IRQ #s.

Fixes: c33fad0c3748 ("usb: otg: Adding twl6030-usb transceiver driver for OMAP4430")
Acked-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Link: https://lore.kernel.org/r/9507f50b-50f1-6dc4-f57c-3ed4e53a1c25@omp.ru
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: phy: fsl-usb: add IRQ check

[ Upstream commit ecc2f30dbb25969908115c81ec23650ed982b004 ]

The driver neglects to check the result of platform_get_irq()'s call and
blithely passes the negative error codes to request_irq() (which takes
*unsigned* IRQ #), causing it to fail with -EINVAL, overriding an original
error code. Stop calling request_irq() with the invalid IRQ #s.

Fixes: 0807c500a1a6 ("USB: add Freescale USB OTG Transceiver driver")
Acked-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Link: https://lore.kernel.org/r/b0a86089-8b8b-122e-fd6d-73e8c2304964@omp.ru
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: misc: brcmstb-usb-pinmap: add IRQ check

[ Upstream commit 711087f342914e831269438ff42cf59bb0142c71 ]

The driver neglects to check the result of platform_get_irq()'s call and
blithely passes the negative error codes to devm_request_irq() (which takes
*unsigned* IRQ #), causing it to fail with -EINVAL, overriding an original
error code.  Stop calling devm_request_irq() with the invalid IRQ #s.

Fixes: 517c4c44b323 ("usb: Add driver to allow any GPIO to be used for 7211 USB signals")
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Link: https://lore.kernel.org/r/806d0b1a-365b-93d9-3fc1-922105ca5e61@omp.ru
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mac80211: remove unnecessary NULL check in ieee80211_register_hw()

[ Upstream commit 4a11174d6dbd0bde6d5a1d6efb0d70f58811db55 ]

The address "&sband->iftype_data[i]" points to an array at the end of
struct.  It can't be NULL and so the check can be removed.

Fixes: bac2fd3d7534 ("mac80211: remove use of ieee80211_get_he_sta_cap()")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/YNmgHi7Rh3SISdog@mwanda
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: gadget: udc: s3c2410: add IRQ check

[ Upstream commit ecff88e819e31081d41cd05bb199b9bd10e13e90 ]

The driver neglects to check the result of platform_get_irq()'s call and
blithely passes the negative error codes to request_irq() (which takes
*unsigned* IRQ #), causing it to fail with -EINVAL, overriding an original
error code. Stop calling request_irq() with the invalid IRQ #s.

Fixes: 188db4435ac6 ("usb: gadget: s3c: use platform resources")
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Acked-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Link: https://lore.kernel.org/r/bd69b22c-b484-5a1f-c798-78d4b78405f2@omp.ru
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: gadget: udc: at91: add IRQ check

[ Upstream commit 50855c31573b02963f0aa2aacfd4ea41c31ae0e0 ]

The driver neglects to check the result of platform_get_irq()'s call and
blithely passes the negative error codes to devm_request_irq() (which takes
*unsigned* IRQ #), causing it to fail with -EINVAL, overriding an original
error code. Stop calling devm_request_irq() with the invalid IRQ #s.

Fixes: 8b2e76687b39 ("USB: AT91 UDC updates, mostly power management")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Acked-by: Felipe Balbi <balbi@kernel.org>
Link: https://lore.kernel.org/r/6654a224-739a-1a80-12f0-76d920f87b6c@omp.ru
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: dwc3: qcom: add IRQ check

[ Upstream commit 175006956740f70ca23394c58f8d7804776741bd ]

In dwc3_qcom_acpi_register_core(), the driver neglects to check the result
of platform_get_irq()'s call and blithely assigns the negative error codes
to the allocated child device's IRQ resource and then passing this resource
to platform_device_add_resources() and later causing dwc3_otg_get_irq() to
fail anyway.  Stop calling platform_device_add_resources() with the invalid
IRQ #s, so that there's less complexity in the IRQ error checking.

Fixes: 2bc02355f8ba ("usb: dwc3: qcom: Add support for booting with ACPI")
Acked-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Link: https://lore.kernel.org/r/45fec3da-1679-5bfe-5d74-219ca3fb28e7@omp.ru
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>