git.fsl.cs.sunysb.edu Git - wrapfs-5.3.y.git/log

iio:filter:admv8818: select REGMAP_SPI for ADMV8818

[ Upstream commit d85cce86a86746354fffb688dd134609c8277adc ]

admv8818 driver needs __devm_regmap_init_spi() which is defined
when CONFIG_REGMAP_SPI is set and struct regmap_config when
CONFIG_REGMAP is set, so automatically select CONFIG_REGMAP_SPI
which also sets CONFIG_REGMAP.

Fixes: f34fe888ad05 ("iio:filter:admv8818: add support for ADMV8818")
Signed-off-by: Wang ShaoBo <bobo.shaobowang@huawei.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20220320055457.254983-1-bobo.shaobowang@huawei.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iio:imu:bmi160: disable regulator in error path

[ Upstream commit d926054d5565d3cfa2c7c3f7a48e79bcc10453ed ]

Regulator should be disabled in error path as mentioned in _regulator_put().
Also disable accel if gyro cannot be enabled.

[   16.233604] WARNING: CPU: 0 PID: 2177 at drivers/regulator/core.c:2257 _regulator_put
[   16.240453] Call Trace:
[   16.240572]  <TASK>
[   16.240676]  regulator_put+0x26/0x40
[   16.240853]  regulator_bulk_free+0x26/0x50
[   16.241050]  release_nodes+0x3f/0x70
[   16.241225]  devres_release_group+0x147/0x1c0
[   16.241441]  ? bmi160_core_probe+0x175/0x3a0 [bmi160_core]

Fixes: 5dea3fb066f0 ("iio: imu: bmi160: added regulator support")
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Tong Zhang <ztong0001@gmail.com>
Link: https://lore.kernel.org/r/20220327154005.806049-1-ztong0001@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iio: dac: ad3552r: fix signedness bug in ad3552r_reset()

[ Upstream commit 460bfa65b0de72f4d8a808bc7cfb1cb591a95b18 ]

The "val" variable is used to store either negative error codes from
ad3552r_read_reg_wrapper() or positive u16 values on success. It needs
to be signed for the error handling to work correctly.

Fixes: 8f2b54824b28 ("drivers:iio:dac: Add AD3552R driver support")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20220316122354.GA16825@kili
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: meson: remove CPU opps below 1GHz for SM1 boards

[ Upstream commit fd86d85401c2049f652293877c0f7e6e5afc3bbc ]

Amlogic SM1 devices experience CPU stalls and random board wedges when
the system idles and CPU cores clock down to lower opp points. Recent
vendor kernels include a change to remove 100-250MHz and other distro
sources also remove the 500/667MHz points. Unless all 100-667Mhz opps
are removed or the CPU governor forced to performance stalls are still
observed, so let's remove them to improve stability and uptime.

Fixes: 3d9e76483049 ("arm64: dts: meson-sm1-sei610: enable DVFS")
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20220210100638.19130-3-christianshewitt@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: meson: remove CPU opps below 1GHz for G12B boards

[ Upstream commit 6c4d636bc00dc17c63ffb2a73a0da850240e26e3 ]

Amlogic G12B devices experience CPU stalls and random board wedges when
the system idles and CPU cores clock down to lower opp points. Recent
vendor kernels include a change to remove 100-250MHz and other distro
sources also remove the 500/667MHz points. Unless all 100-667Mhz opps
are removed or the CPU governor forced to performance stalls are still
observed, so let's remove them to improve stability and uptime.

Fixes: b96d4e92709b ("arm64: dts: meson-g12b: support a311d and s922x cpu operating points")
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20220210100638.19130-2-christianshewitt@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

video: fbdev: udlfb: properly check endpoint type

[ Upstream commit aaf7dbe07385e0b8deb7237eca2a79926bbc7091 ]

syzbot reported warning in usb_submit_urb, which is caused by wrong
endpoint type.

This driver uses out bulk endpoint for communication, so
let's check if this endpoint is present and bail out early if not.

Fail log:

usb 1-1: BOGUS urb xfer, pipe 3 != type 1
WARNING: CPU: 0 PID: 4822 at drivers/usb/core/urb.c:493 usb_submit_urb+0xd27/0x1540 drivers/usb/core/urb.c:493
Modules linked in:
CPU: 0 PID: 4822 Comm: kworker/0:3 Tainted: G W 5.13.0-syzkaller #0
...
Workqueue: usb_hub_wq hub_event
RIP: 0010:usb_submit_urb+0xd27/0x1540 drivers/usb/core/urb.c:493
...
Call Trace:
dlfb_submit_urb+0x89/0x160 drivers/video/fbdev/udlfb.c:1969
dlfb_set_video_mode+0x21f0/0x2950 drivers/video/fbdev/udlfb.c:315
dlfb_ops_set_par+0x2a3/0x840 drivers/video/fbdev/udlfb.c:1110
dlfb_usb_probe.cold+0x113e/0x1f4a drivers/video/fbdev/udlfb.c:1732
usb_probe_interface+0x315/0x7f0 drivers/usb/core/driver.c:396

Fixes: 88e58b1a42f8 ("Staging: add udlfb driver")
Reported-and-tested-by: syzbot+53ce4a4246d0fe0fee34@syzkaller.appspotmail.com
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cpufreq: qcom-cpufreq-hw: Fix throttle frequency value on EPSS platforms

[ Upstream commit f84ccad5f5660f86a642a3d7e2bfdc4e7a8a2d49 ]

On QCOM platforms with EPSS flavour of cpufreq IP a throttled frequency is
obtained from another register REG_DOMAIN_STATE, thus the helper function
qcom_lmh_get_throttle_freq() should be modified accordingly, as for now
it returns gibberish since .reg_current_vote is unset for EPSS hardware.

To exclude a hardcoded magic number 19200 it is replaced by "xo" clock rate
in KHz.

Fixes: 275157b367f4 ("cpufreq: qcom-cpufreq-hw: Add dcvs interrupt support")
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cpufreq: qcom-hw: fix the opp entries refcounting

[ Upstream commit 6240aaad75e1a623872a830d13393d7aabf1052c ]

The qcom_lmh_dcvs_notify() will get the dev_pm_opp instance for
throttling, but will not put it, ending up with leaking a reference
count and the following backtrace when putting the CPU offline.

Correctly put the reference count of the returned opp instance.

[   84.418025] ------------[ cut here ]------------
[   84.422770] WARNING: CPU: 7 PID: 43 at drivers/opp/core.c:1396 _opp_table_kref_release+0x188/0x190
[   84.431966] Modules linked in:
[   84.435106] CPU: 7 PID: 43 Comm: cpuhp/7 Tainted: G S                5.17.0-rc6-00388-g7cf3c0d89c44-dirty #721
[   84.451631] pstate: 82400005 (Nzcv daif +PAN -UAO +TCO -DIT -SSBS BTYPE=--)
[   84.458781] pc : _opp_table_kref_release+0x188/0x190
[   84.463878] lr : _opp_table_kref_release+0x78/0x190
[   84.468885] sp : ffff80000841bc70
[   84.472294] x29: ffff80000841bc70 x28: ffff6664afe3d000 x27: ffff1db6729e5908
[   84.479621] x26: 0000000000000000 x25: 0000000000000000 x24: ffff1db6729e58e0
[   84.486946] x23: ffff8000080a5000 x22: ffff1db40aad80e0 x21: ffff1db4002fec80
[   84.494277] x20: ffff1db40aad8000 x19: ffffb751c3186300 x18: ffffffffffffffff
[   84.501603] x17: 5300326563697665 x16: 645f676e696c6f6f x15: 00001186c1df5448
[   84.508928] x14: 00000000000002e9 x13: 0000000000000000 x12: 0000000000000000
[   84.516256] x11: ffffb751c3186368 x10: ffffb751c39a2a70 x9 : 0000000000000000
[   84.523585] x8 : ffff1db4008edf00 x7 : ffffb751c328c000 x6 : 0000000000000001
[   84.530916] x5 : 0000000000040000 x4 : 0000000000000001 x3 : ffff1db4008edf00
[   84.538247] x2 : 0000000000000000 x1 : ffff1db400aa6100 x0 : ffff1db40aad80d0
[   84.545579] Call trace:
[   84.548101]  _opp_table_kref_release+0x188/0x190
[   84.552842]  dev_pm_opp_remove_all_dynamic+0x8c/0xc0
[   84.557949]  qcom_cpufreq_hw_cpu_exit+0x30/0xdc
[   84.562608]  cpufreq_offline.isra.0+0x1b4/0x1d8
[   84.567270]  cpuhp_cpufreq_offline+0x10/0x6c
[   84.571663]  cpuhp_invoke_callback+0x16c/0x2b0
[   84.576231]  cpuhp_thread_fun+0x190/0x250
[   84.580353]  smpboot_thread_fn+0x12c/0x230
[   84.584568]  kthread+0xfc/0x100
[   84.587810]  ret_from_fork+0x10/0x20
[   84.591490] irq event stamp: 3482
[   84.594901] hardirqs last  enabled at (3481): [<ffffb751c13c3db0>] call_rcu+0x39c/0x50c
[   84.603119] hardirqs last disabled at (3482): [<ffffb751c236b518>] el1_dbg+0x24/0x8c
[   84.611074] softirqs last  enabled at (310): [<ffffb751c1290410>] _stext+0x410/0x588
[   84.619028] softirqs last disabled at (305): [<ffffb751c131bf68>] __irq_exit_rcu+0x158/0x174
[   84.627691] ---[ end trace 0000000000000000 ]---

Fixes: 275157b367f4 ("cpufreq: qcom-cpufreq-hw: Add dcvs interrupt support")
Reported-by: kernel test robot <lkp@intel.com>
Tested-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cpufreq: qcom-hw: fix the race between LMH worker and cpuhp

[ Upstream commit 5e4f009da6be563984ba4db4ef4f32529e9aeb90 ]

The driver would disable the worker when cpu is being put offline, but
it happens closer to the end of cpufreq_offline(). The function
qcom_lmh_dcvs_poll() can be running in parallel with this, when
policy->cpus already has been updated. Read policy->related_cpus
instead.

[   37.122433] ------------[ cut here ]------------
[   37.127225] WARNING: CPU: 0 PID: 187 at drivers/base/arch_topology.c:180 topology_update_thermal_pressure+0xec/0x100
[   37.138098] Modules linked in:
[   37.141279] CPU: 0 PID: 187 Comm: kworker/0:3 Tainted: G S                5.17.0-rc6-00389-g37c83d0b8710-dirty #713
[   37.158306] Workqueue: events qcom_lmh_dcvs_poll
[   37.163095] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[   37.170278] pc : topology_update_thermal_pressure+0xec/0x100
[   37.176131] lr : topology_update_thermal_pressure+0x20/0x100
[   37.181977] sp : ffff800009b6bce0
[   37.185402] x29: ffff800009b6bce0 x28: ffffd87abe92b000 x27: ffff04bd7292e205
[   37.192792] x26: ffffd87abe930af8 x25: ffffd87abe94e4c8 x24: 0000000000000000
[   37.200180] x23: ffff04bb01177018 x22: ffff04bb011770c0 x21: ffff04bb01177000
[   37.207567] x20: ffff04bb0a419000 x19: 00000000000c4e00 x18: 0000000000000000
[   37.214954] x17: 000000040044ffff x16: 004000b2b5503510 x15: 0000006aaa1326d2
[   37.222333] x14: 0000000000000232 x13: 0000000000000001 x12: 0000000000000040
[   37.229718] x11: ffff04bb00400000 x10: 968f57bd39f701c8 x9 : ffff04bb0acc8674
[   37.237095] x8 : fefefefefefefeff x7 : 0000000000000018 x6 : ffffd87abd90092c
[   37.244478] x5 : 0000000000000016 x4 : 0000000000000000 x3 : 0000000000000100
[   37.251852] x2 : ffff04bb0a419020 x1 : 0000000000000100 x0 : 0000000000000100
[   37.259235] Call trace:
[   37.261771]  topology_update_thermal_pressure+0xec/0x100
[   37.267266]  qcom_lmh_dcvs_poll+0xbc/0x154
[   37.271505]  process_one_work+0x288/0x69c
[   37.275654]  worker_thread+0x74/0x470
[   37.279450]  kthread+0xfc/0x100
[   37.282712]  ret_from_fork+0x10/0x20
[   37.286417] irq event stamp: 74
[   37.289664] hardirqs last  enabled at (73): [<ffffd87abdd78af4>] _raw_spin_unlock_irq+0x44/0x80
[   37.298632] hardirqs last disabled at (74): [<ffffd87abdd71fc0>] __schedule+0x710/0xa10
[   37.306885] softirqs last  enabled at (58): [<ffffd87abcc90410>] _stext+0x410/0x588
[   37.314778] softirqs last disabled at (51): [<ffffd87abcd1bf68>] __irq_exit_rcu+0x158/0x174
[   37.323386] ---[ end trace 0000000000000000 ]---

Fixes: 275157b367f4 ("cpufreq: qcom-cpufreq-hw: Add dcvs interrupt support")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cpufreq: qcom-hw: drop affinity hint before freeing the IRQ

[ Upstream commit be5985b3dbce5ba2af3c8b0f2b7df235c93907e6 ]

Drop affinity hint before freeing the throttling IRQ to fix the
following trace:

[  185.114773] ------------[ cut here ]------------
[  185.119517] WARNING: CPU: 7 PID: 43 at kernel/irq/manage.c:1887 free_irq+0x3a4/0x3dc
[  185.127474] Modules linked in:
[  185.130618] CPU: 7 PID: 43 Comm: cpuhp/7 Tainted: G S      W         5.17.0-rc6-00386-g67382a5b705d-dirty #690
[  185.147125] pstate: 604000c5 (nZCv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[  185.154269] pc : free_irq+0x3a4/0x3dc
[  185.158031] lr : free_irq+0x33c/0x3dc
[  185.161792] sp : ffff80000841bc90
[  185.165195] x29: ffff80000841bc90 x28: ffffa6edc5c3d000 x27: ffff6d93729e5908
[  185.172515] x26: 0000000000000000 x25: ffff6d910109fc00 x24: ffff6d91011490e0
[  185.179838] x23: ffff6d9101149218 x22: 0000000000000080 x21: 0000000000000000
[  185.187163] x20: ffff6d9101149000 x19: ffff6d910ab61500 x18: ffffffffffffffff
[  185.194487] x17: 2e35202020202020 x16: 2020202020202020 x15: ffff80008841b9a7
[  185.201805] x14: 00000000000003c9 x13: 0000000000000001 x12: 0000000000000040
[  185.209135] x11: ffff6d91005aab58 x10: ffff6d91005aab5a x9 : ffffc6a5ad1c5408
[  185.216455] x8 : ffff6d91005adb88 x7 : 0000000000000000 x6 : ffffc6a5ab5a91f4
[  185.223776] x5 : 0000000000000000 x4 : ffff6d91011490a8 x3 : ffffc6a5ad266108
[  185.231098] x2 : 0000000013033204 x1 : ffff6d9101149000 x0 : ffff6d910a9cc000
[  185.238421] Call trace:
[  185.240932]  free_irq+0x3a4/0x3dc
[  185.244334]  qcom_cpufreq_hw_cpu_exit+0x78/0xcc
[  185.248985]  cpufreq_offline.isra.0+0x228/0x270
[  185.253639]  cpuhp_cpufreq_offline+0x10/0x20
[  185.258027]  cpuhp_invoke_callback+0x16c/0x2b0
[  185.262592]  cpuhp_thread_fun+0x190/0x250
[  185.266710]  smpboot_thread_fn+0x12c/0x230
[  185.270914]  kthread+0xfc/0x100
[  185.274145]  ret_from_fork+0x10/0x20
[  185.277820] irq event stamp: 212
[  185.281136] hardirqs last  enabled at (211): [<ffffc6a5ac57973c>] _raw_spin_unlock_irqrestore+0x8c/0xa0
[  185.290775] hardirqs last disabled at (212): [<ffffc6a5ac572100>] __schedule+0x710/0xa10
[  185.299081] softirqs last  enabled at (0): [<ffffc6a5ab50f7b0>] copy_process+0x7d0/0x1a14
[  185.307475] softirqs last disabled at (0): [<0000000000000000>] 0x0

Fixes: 3ed6dfbd3bb98 ("cpufreq: qcom-hw: Set CPU affinity of dcvsh interrupts")
Tested-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

virtio_net: fix wrong buf address calculation when using xdp

commit acb16b395c3f3d7502443e0c799c2b42df645642 upstream.

We received a report[1] of kernel crashes when Cilium is used in XDP
mode with virtio_net after updating to newer kernels. After
investigating the reason it turned out that when using mergeable bufs
with an XDP program which adjusts xdp.data or xdp.data_meta page_to_buf()
calculates the build_skb address wrong because the offset can become less
than the headroom so it gets the address of the previous page (-X bytes
depending on how lower offset is):
page_to_skb: page addr ffff9eb2923e2000 buf ffff9eb2923e1ffc offset 252 headroom 256

This is a pr_err() I added in the beginning of page_to_skb which clearly
shows offset that is less than headroom by adding 4 bytes of metadata
via an xdp prog. The calculations done are:
receive_mergeable():
headroom = VIRTIO_XDP_HEADROOM; // VIRTIO_XDP_HEADROOM == 256 bytes
offset = xdp.data - page_address(xdp_page) -
          vi->hdr_len - metasize;

page_to_skb():
p = page_address(page) + offset;
...
buf = p - headroom;

Now buf goes -4 bytes from the page's starting address as can be seen
above which is set as skb->head and skb->data by build_skb later. Depending
on what's done with the skb (when it's freed most often) we get all kinds
of corruptions and BUG_ON() triggers in mm[2]. We have to recalculate
the new headroom after the xdp program has run, similar to how offset
and len are recalculated. Headroom is directly related to
data_hard_start, data and data_meta, so we use them to get the new size.
The result is correct (similar pr_err() in page_to_skb, one case of
xdp_page and one case of virtnet buf):
a) Case with 4 bytes of metadata
[  115.949641] page_to_skb: page addr ffff8b4dcfad2000 offset 252 headroom 252
[  121.084105] page_to_skb: page addr ffff8b4dcf018000 offset 20732 headroom 252
b) Case of pushing data +32 bytes
[  153.181401] page_to_skb: page addr ffff8b4dd0c4d000 offset 288 headroom 288
[  158.480421] page_to_skb: page addr ffff8b4dd00b0000 offset 24864 headroom 288
c) Case of pushing data -33 bytes
[  835.906830] page_to_skb: page addr ffff8b4dd3270000 offset 223 headroom 223
[  840.839910] page_to_skb: page addr ffff8b4dcdd68000 offset 12511 headroom 223

Offset and headroom are equal because offset points to the start of
reserved bytes for the virtio_net header which are at buf start +
headroom, while data points at buf start + vnet hdr size + headroom so
when data or data_meta are adjusted by the xdp prog both the headroom size
and the offset change equally. We can use data_hard_start to compute the
new headroom after the xdp prog (linearized / page start case, the
virtnet buf case is similar just with bigger base offset):
xdp.data_hard_start = page_address + vnet_hdr
xdp.data = page_address + vnet_hdr + headroom
new headroom after xdp prog = xdp.data - xdp.data_hard_start - metasize

An example reproducer xdp prog[3] is below.

[1] https://github.com/cilium/cilium/issues/19453

[2] Two of the many traces:
[   40.437400] BUG: Bad page state in process swapper/0  pfn:14940
[   40.916726] BUG: Bad page state in process systemd-resolve  pfn:053b7
[   41.300891] kernel BUG at include/linux/mm.h:720!
[   41.301801] invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
[   41.302784] CPU: 1 PID: 1181 Comm: kubelet Kdump: loaded Tainted: G    B   W         5.18.0-rc1+ #37
[   41.304458] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.15.0-1.fc35 04/01/2014
[   41.306018] RIP: 0010:page_frag_free+0x79/0xe0
[   41.306836] Code: 00 00 75 ea 48 8b 07 a9 00 00 01 00 74 e0 48 8b 47 48 48 8d 50 ff a8 01 48 0f 45 fa eb d0 48 c7 c6 18 b8 30 a6 e8 d7 f8 fc ff <0f> 0b 48 8d 78 ff eb bc 48 8b 07 a9 00 00 01 00 74 3a 66 90 0f b6
[   41.310235] RSP: 0018:ffffac05c2a6bc78 EFLAGS: 00010292
[   41.311201] RAX: 000000000000003e RBX: 0000000000000000 RCX: 0000000000000000
[   41.312502] RDX: 0000000000000001 RSI: ffffffffa6423004 RDI: 00000000ffffffff
[   41.313794] RBP: ffff993c98823600 R08: 0000000000000000 R09: 00000000ffffdfff
[   41.315089] R10: ffffac05c2a6ba68 R11: ffffffffa698ca28 R12: ffff993c98823600
[   41.316398] R13: ffff993c86311ebc R14: 0000000000000000 R15: 000000000000005c
[   41.317700] FS:  00007fe13fc56740(0000) GS:ffff993cdd900000(0000) knlGS:0000000000000000
[   41.319150] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   41.320152] CR2: 000000c00008a000 CR3: 0000000014908000 CR4: 0000000000350ee0
[   41.321387] Call Trace:
[   41.321819]  <TASK>
[   41.322193]  skb_release_data+0x13f/0x1c0
[   41.322902]  __kfree_skb+0x20/0x30
[   41.343870]  tcp_recvmsg_locked+0x671/0x880
[   41.363764]  tcp_recvmsg+0x5e/0x1c0
[   41.384102]  inet_recvmsg+0x42/0x100
[   41.406783]  ? sock_recvmsg+0x1d/0x70
[   41.428201]  sock_read_iter+0x84/0xd0
[   41.445592]  ? 0xffffffffa3000000
[   41.462442]  new_sync_read+0x148/0x160
[   41.479314]  ? 0xffffffffa3000000
[   41.496937]  vfs_read+0x138/0x190
[   41.517198]  ksys_read+0x87/0xc0
[   41.535336]  do_syscall_64+0x3b/0x90
[   41.551637]  entry_SYSCALL_64_after_hwframe+0x44/0xae
[   41.568050] RIP: 0033:0x48765b
[   41.583955] Code: e8 4a 35 fe ff eb 88 cc cc cc cc cc cc cc cc e8 fb 7a fe ff 48 8b 7c 24 10 48 8b 74 24 18 48 8b 54 24 20 48 8b 44 24 08 0f 05 <48> 3d 01 f0 ff ff 76 20 48 c7 44 24 28 ff ff ff ff 48 c7 44 24 30
[   41.632818] RSP: 002b:000000c000a2f5b8 EFLAGS: 00000212 ORIG_RAX: 0000000000000000
[   41.664588] RAX: ffffffffffffffda RBX: 000000c000062000 RCX: 000000000048765b
[   41.681205] RDX: 0000000000005e54 RSI: 000000c000e66000 RDI: 0000000000000016
[   41.697164] RBP: 000000c000a2f608 R08: 0000000000000001 R09: 00000000000001b4
[   41.713034] R10: 00000000000000b6 R11: 0000000000000212 R12: 00000000000000e9
[   41.728755] R13: 0000000000000001 R14: 000000c000a92000 R15: ffffffffffffffff
[   41.744254]  </TASK>
[   41.758585] Modules linked in: br_netfilter bridge veth netconsole virtio_net

and

[   33.524802] BUG: Bad page state in process systemd-network  pfn:11e60
[   33.528617] page ffffe05dc0147b00 ffffe05dc04e7a00 ffff8ae9851ec000 (1) len 82 offset 252 metasize 4 hroom 0 hdr_len 12 data ffff8ae9851ec10c data_meta ffff8ae9851ec108 data_end ffff8ae9851ec14e
[   33.529764] page:000000003792b5ba refcount:0 mapcount:-512 mapping:0000000000000000 index:0x0 pfn:0x11e60
[   33.532463] flags: 0xfffffc0000000(node=0|zone=1|lastcpupid=0x1fffff)
[   33.532468] raw: 000fffffc0000000 0000000000000000 dead000000000122 0000000000000000
[   33.532470] raw: 0000000000000000 0000000000000000 00000000fffffdff 0000000000000000
[   33.532471] page dumped because: nonzero mapcount
[   33.532472] Modules linked in: br_netfilter bridge veth netconsole virtio_net
[   33.532479] CPU: 0 PID: 791 Comm: systemd-network Kdump: loaded Not tainted 5.18.0-rc1+ #37
[   33.532482] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.15.0-1.fc35 04/01/2014
[   33.532484] Call Trace:
[   33.532496]  <TASK>
[   33.532500]  dump_stack_lvl+0x45/0x5a
[   33.532506]  bad_page.cold+0x63/0x94
[   33.532510]  free_pcp_prepare+0x290/0x420
[   33.532515]  free_unref_page+0x1b/0x100
[   33.532518]  skb_release_data+0x13f/0x1c0
[   33.532524]  kfree_skb_reason+0x3e/0xc0
[   33.532527]  ip6_mc_input+0x23c/0x2b0
[   33.532531]  ip6_sublist_rcv_finish+0x83/0x90
[   33.532534]  ip6_sublist_rcv+0x22b/0x2b0

[3] XDP program to reproduce(xdp_pass.c):
#include <linux/bpf.h>
#include <bpf/bpf_helpers.h>

SEC("xdp_pass")
int xdp_pkt_pass(struct xdp_md *ctx)
{
          bpf_xdp_adjust_head(ctx, -(int)32);
          return XDP_PASS;
}

char _license[] SEC("license") = "GPL";

compile: clang -O2 -g -Wall -target bpf -c xdp_pass.c -o xdp_pass.o
load on virtio_net: ip link set enp1s0 xdpdrv obj xdp_pass.o sec xdp_pass

CC: stable@vger.kernel.org
CC: Jason Wang <jasowang@redhat.com>
CC: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
CC: Daniel Borkmann <daniel@iogearbox.net>
CC: "Michael S. Tsirkin" <mst@redhat.com>
CC: virtualization@lists.linux-foundation.org
Fixes: 8fb7da9e9907 ("virtio_net: get build_skb() buf by data ptr")
Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20220425103703.3067292-1-razor@blackwall.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iocost: don't reset the inuse weight of under-weighted debtors

commit 8c936f9ea11ec4e35e288810a7503b5c841a355f upstream.

When an iocg is in debt, its inuse weight is owned by debt handling and
should stay at 1. This invariant was broken when determining the amount of
surpluses at the beginning of donation calculation - when an iocg's
hierarchical weight is too low, the iocg is excluded from donation
calculation and its inuse is reset to its active regardless of its
indebtedness, triggering warnings like the following:

WARNING: CPU: 5 PID: 0 at block/blk-iocost.c:1416 iocg_kick_waitq+0x392/0x3a0
...
RIP: 0010:iocg_kick_waitq+0x392/0x3a0
Code: 00 00 be ff ff ff ff 48 89 4d a8 e8 98 b2 70 00 48 8b 4d a8 85 c0 0f 85 4a fe ff ff 0f 0b e9 43 fe ff ff 0f 0b e9 4d fe ff ff <0f> 0b e9 50 fe ff ff e8 a2 ae 70 00 66 90 0f 1f 44 00 00 55 48 89
RSP: 0018:ffffc90000200d08 EFLAGS: 00010016
...
  <IRQ>
  ioc_timer_fn+0x2e0/0x1470
  call_timer_fn+0xa1/0x2c0
...

As this happens only when an iocg's hierarchical weight is negligible, its
impact likely is limited to triggering the warnings. Fix it by skipping
resetting inuse of under-weighted debtors.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Rik van Riel <riel@surriel.com>
Fixes: c421a3eb2e27 ("blk-iocost: revamp debt handling")
Cc: stable@vger.kernel.org # v5.10+
Link: https://lore.kernel.org/r/YmjODd4aif9BzFuO@slm.duckdns.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/pci/xen: Disable PCI/MSI[-X] masking for XEN_HVM guests

commit 7e0815b3e09986d2fe651199363e135b9358132a upstream.

When a XEN_HVM guest uses the XEN PIRQ/Eventchannel mechanism, then
PCI/MSI[-X] masking is solely controlled by the hypervisor, but contrary to
XEN_PV guests this does not disable PCI/MSI[-X] masking in the PCI/MSI
layer.

This can lead to a situation where the PCI/MSI layer masks an MSI[-X]
interrupt and the hypervisor grants the write despite the fact that it
already requested the interrupt. As a consequence interrupt delivery on the
affected device is not happening ever.

Set pci_msi_ignore_mask to prevent that like it's done for XEN_PV guests
already.

Fixes: 809f9267bbab ("xen: map MSIs into pirqs")
Reported-by: Jeremi Piotrowski <jpiotrowski@linux.microsoft.com>
Reported-by: Dusty Mabe <dustymabe@redhat.com>
Reported-by: Salvatore Bonaccorso <carnil@debian.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Noah Meyerhans <noahm@debian.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/87tuaduxj5.ffs@tglx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/cpu: Load microcode during restore_processor_state()

commit f9e14dbbd454581061c736bf70bf5cbb15ac927c upstream.

When resuming from system sleep state, restore_processor_state()
restores the boot CPU MSRs. These MSRs could be emulated by microcode.
If microcode is not loaded yet, writing to emulated MSRs leads to
unchecked MSR access error:

  ...
  PM: Calling lapic_suspend+0x0/0x210
  unchecked MSR access error: WRMSR to 0x10f (tried to write 0x0...0) at rIP: ... (native_write_msr)
  Call Trace:
    <TASK>
    ? restore_processor_state
    x86_acpi_suspend_lowlevel
    acpi_suspend_enter
    suspend_devices_and_enter
    pm_suspend.cold
    state_store
    kobj_attr_store
    sysfs_kf_write
    kernfs_fop_write_iter
    new_sync_write
    vfs_write
    ksys_write
    __x64_sys_write
    do_syscall_64
    entry_SYSCALL_64_after_hwframe
   RIP: 0033:0x7fda13c260a7

To ensure microcode emulated MSRs are available for restoration, load
the microcode on the boot CPU before restoring these MSRs.

  [ Pawan: write commit message and productize it. ]

Fixes: e2a1256b17b1 ("x86/speculation: Restore speculation related MSRs during S3 resume")
Reported-by: Kyle D. Pelton <kyle.d.pelton@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Tested-by: Kyle D. Pelton <kyle.d.pelton@intel.com>
Cc: stable@vger.kernel.org
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215841
Link: https://lore.kernel.org/r/4350dfbf785cd482d3fafa72b2b49c83102df3ce.1650386317.git.pawan.kumar.gupta@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

riscv: patch_text: Fixup last cpu should be master

commit 8ec1442953c66a1d8462cccd8c20b7ba561f5915 upstream.

These patch_text implementations are using stop_machine_cpuslocked
infrastructure with atomic cpu_count. The original idea: When the
master CPU patch_text, the others should wait for it. But current
implementation is using the first CPU as master, which couldn't
guarantee the remaining CPUs are waiting. This patch changes the
last CPU as the master to solve the potential risk.

Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Signed-off-by: Guo Ren <guoren@kernel.org>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Fixes: 043cb41a85de ("riscv: introduce interfaces to patch kernel code")
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bus: fsl-mc-msi: Fix MSI descriptor mutex lock for msi_first_desc()

commit c7d2f89fea26c84d5accc55d9976dd7e5305e63a upstream.

Commit e8604b1447b4 introduced a call to the helper function
msi_first_desc(), which needs MSI descriptor mutex lock before
call. However, the required mutex lock was not added. This results in
lockdep assertion:

WARNING: CPU: 4 PID: 119 at kernel/irq/msi.c:274 msi_first_desc+0xd0/0x10c
  msi_first_desc+0xd0/0x10c
  fsl_mc_msi_domain_alloc_irqs+0x7c/0xc0
  fsl_mc_populate_irq_pool+0x80/0x3cc

Fix this by adding the mutex lock and unlock around the function call.

Fixes: e8604b1447b4 ("bus: fsl-mc-msi: Simplify MSI descriptor handling")
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220412075636.755454-1-shinichiro.kawasaki@wdc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

hex2bin: fix access beyond string end

commit e4d8a29997731b3bb14059024b24df9f784288d0 upstream.

If we pass too short string to "hex2bin" (and the string size without
the terminating NUL character is even), "hex2bin" reads one byte after
the terminating NUL character. This patch fixes it.

Note that hex_to_bin returns -1 on error and hex2bin return -EINVAL on
error - so we can't just return the variable "hi" or "lo" on error.
This inconsistency may be fixed in the next merge window, but for the
purpose of fixing this bug, we just preserve the existing behavior and
return -1 and -EINVAL.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Fixes: b78049831ffe ("lib: add error checking to hex2bin")
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

hex2bin: make the function hex_to_bin constant-time

commit e5be15767e7e284351853cbaba80cde8620341fb upstream.

The function hex2bin is used to load cryptographic keys into device
mapper targets dm-crypt and dm-integrity. It should take constant time
independent on the processed data, so that concurrently running
unprivileged code can't infer any information about the keys via
microarchitectural convert channels.

This patch changes the function hex_to_bin so that it contains no
branches and no memory accesses.

Note that this shouldn't cause performance degradation because the size
of the new function is the same as the size of the old function (on
x86-64) - and the new function causes no branch misprediction penalties.

I compile-tested this function with gcc on aarch64 alpha arm hppa hppa64
i386 ia64 m68k mips32 mips64 powerpc powerpc64 riscv sh4 s390x sparc32
sparc64 x86_64 and with clang on aarch64 arm hexagon i386 mips32 mips64
powerpc powerpc64 s390x sparc32 sparc64 x86_64 to verify that there are
no branches in the generated code.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

f2fs: should not truncate blocks during roll-forward recovery

commit 4d8ec91208196e0e19195f1e7d6be9de5873f242 upstream.

If the file preallocated blocks and fsync'ed, we should not truncate them during
roll-forward recovery which will recover i_size correctly back.

Fixes: d4dd19ec1ea0 ("f2fs: do not expose unwritten blocks to user by DIO")
Cc: <stable@vger.kernel.org> # 5.17+
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

pinctrl: samsung: fix missing GPIOLIB on ARM64 Exynos config

commit ac875df4d854ab13d9c4af682a1837a1214fecec upstream.

The Samsung pinctrl drivers depend on OF_GPIO, which is part of GPIOLIB.
ARMv7 Exynos platform selects GPIOLIB and Samsung pinctrl drivers. ARMv8
Exynos selects only the latter leading to possible wrong configuration
on ARMv8 build:

  WARNING: unmet direct dependencies detected for PINCTRL_EXYNOS
    Depends on [n]: PINCTRL [=y] && OF_GPIO [=n] && (ARCH_EXYNOS [=y] || ARCH_S5PV210 || COMPILE_TEST [=y])
    Selected by [y]:
    - ARCH_EXYNOS [=y]

Always select the GPIOLIB from the Samsung pinctrl drivers to fix the
issue.  This requires removing of OF_GPIO dependency (to avoid recursive
dependency), so add dependency on OF for COMPILE_TEST cases.

Reported-by: Necip Fazil Yildiran <fazilyildiran@gmail.com>
Fixes: eed6b3eb20b9 ("arm64: Split out platform options to separate Kconfig")
Cc: <stable@vger.kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20220420141407.470955-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: dts: imx8mm-venice: fix spi2 pin configuration

commit dc900431337f5f861e3cc47ec5be5a69db40ee34 upstream.

Due to what looks like a copy-paste error, the ECSPI2_MISO pad is not
muxed for SPI mode and causes reads from a slave-device connected to the
SPI header to always return zero.

Configure the ECSPI2_MISO pad for SPI mode on the gw71xx, gw72xx and
gw73xx families of boards that got this wrong.

Fixes: 6f30b27c5ef5 ("arm64: dts: imx8mm: Add Gateworks i.MX 8M Mini Development Kits")
Cc: stable@vger.kernel.org # 5.12
Cc: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Acked-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bus: mhi: host: pci_generic: Flush recovery worker during freeze

commit c38f83bae4037023827c85e045841d0421f85034 upstream.

It is possible that the recovery work might be running while the freeze
gets executed (during hibernation etc.,). Currently, we don't powerdown
the stack if it is not up but if the recovery work completes after freeze,
then the device will be up afterwards. This will not be a sane situation.

So let's flush the recovery worker before trying to powerdown the device.

Cc: stable@vger.kernel.org
Fixes: 5f0c2ee1fe8d ("bus: mhi: pci-generic: Fix hibernation")
Reported-by: Bhaumik Vasav Bhatt <quic_bbhatt@quicinc.com>
Reviewed-by: Bhaumik Vasav Bhatt <quic_bbhatt@quicinc.com>
Link: https://lore.kernel.org/r/20220408150039.17297-1-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bus: mhi: host: pci_generic: Add missing poweroff() PM callback

commit e64d5fa5044f225ac87d96a7e4be11389999c4c6 upstream.

During hibernation process, once thaw() stage completes, the MHI endpoint
devices will be in M0 state post recovery. After that, the devices will be
powered down so that the system can enter the target sleep state. During
this stage, the PCI core will put the devices in D3hot. But this transition
is allowed by the MHI spec. The devices can only enter D3hot when it is in
M3 state.

So for fixing this issue, let's add the poweroff() callback that will get
executed before putting the system in target sleep state during
hibernation. This callback will power down the device properly so that it
could be restored during restore() or thaw() stage.

Cc: stable@vger.kernel.org
Fixes: 5f0c2ee1fe8d ("bus: mhi: pci-generic: Fix hibernation")
Reported-by: Hemant Kumar <quic_hemantk@quicinc.com>
Suggested-by: Hemant Kumar <quic_hemantk@quicinc.com>
Link: https://lore.kernel.org/r/20220405125907.5644-1-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ceph: fix possible NULL pointer dereference for req->r_session

commit 7acae6183cf37c48b8da48bbbdb78820fb3913f3 upstream.

The request will be inserted into the ci->i_unsafe_dirops before
assigning the req->r_session, so it's possible that we will hit
NULL pointer dereference bug here.

Cc: stable@vger.kernel.org
URL: https://tracker.ceph.com/issues/55327
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Tested-by: Aaron Tomlin <atomlin@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

topology: make core_mask include at least cluster_siblings

commit db1e59483dfd8d4e956575302520bb8f7e20c79b upstream.

Ampere Altra defines CPU clusters in the ACPI PPTT. They share a Snoop
Control Unit, but have no shared CPU-side last level cache.

cpu_coregroup_mask() will return a cpumask with weight 1, while
cpu_clustergroup_mask() will return a cpumask with weight 2.

As a result, build_sched_domain() will BUG() once per CPU with:

BUG: arch topology borken
the CLS domain not a subset of the MC domain

The MC level cpumask is then extended to that of the CLS child, and is
later removed entirely as redundant. This sched domain topology is an
improvement over previous topologies, or those built without
SCHED_CLUSTER, particularly for certain latency sensitive workloads.
With the current scheduler model and heuristics, this is a desirable
default topology for Ampere Altra and Altra Max system.

Rather than create a custom sched domains topology structure and
introduce new logic in arch/arm64 to detect these systems, update the
core_mask so coregroup is never a subset of clustergroup, extending it
to cluster_siblings if necessary. Only do this if CONFIG_SCHED_CLUSTER
is enabled to avoid also changing the topology (MC) when
CONFIG_SCHED_CLUSTER is disabled.

This has the added benefit over a custom topology of working for both
symmetric and asymmetric topologies. It does not address systems where
the CLUSTER topology is above a populated MC topology, but these are not
considered today and can be addressed separately if and when they
appear.

The final sched domain topology for a 2 socket Ampere Altra system is
unchanged with or without CONFIG_SCHED_CLUSTER, and the BUG is avoided:

For CPU0:

CONFIG_SCHED_CLUSTER=y
CLS  [0-1]
DIE  [0-79]
NUMA [0-159]

CONFIG_SCHED_CLUSTER is not set
DIE  [0-79]
NUMA [0-159]

Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: D. Scott Phillips <scott@os.amperecomputing.com>
Cc: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Cc: <stable@vger.kernel.org> # 5.16.x
Suggested-by: Barry Song <song.bao.hua@hisilicon.com>
Reviewed-by: Barry Song <song.bao.hua@hisilicon.com>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Darren Hart <darren@os.amperecomputing.com>
Link: https://lore.kernel.org/r/c8fe9fce7c86ed56b4c455b8c902982dc2303868.1649696956.git.darren@os.amperecomputing.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arch_topology: Do not set llc_sibling if llc_id is invalid

commit 1dc9f1a66e1718479e1c4f95514e1750602a3cb9 upstream.

When ACPI is not enabled, cpuid_topo->llc_id = cpu_topo->llc_id = -1, which
will set llc_sibling 0xff(...), this is misleading.

Don't set llc_sibling(default 0) if we don't know the cache topology.

Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Wang Qing <wangqing@vivo.com>
Fixes: 37c3ec2d810f ("arm64: topology: divorce MC scheduling domain from core_siblings")
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/1649644580-54626-1-git-send-email-wangqing@vivo.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

eeprom: at25: Use DMA safe buffers

commit 5b47b751b760ee1c74a51660fd096aa148a362cd upstream.

Reading EEPROM fails with following warning:

[   16.357496] ------------[ cut here ]------------
[   16.357529] fsl_spi b01004c0.spi: rejecting DMA map of vmalloc memory
[   16.357698] WARNING: CPU: 0 PID: 371 at include/linux/dma-mapping.h:326 fsl_spi_cpm_bufs+0x2a0/0x2d8
[   16.357775] CPU: 0 PID: 371 Comm: od Not tainted 5.16.11-s3k-dev-01743-g19beecbfe9d6-dirty #109
[   16.357806] NIP:  c03fbc9c LR: c03fbc9c CTR: 00000000
[   16.357825] REGS: e68d9b20 TRAP: 0700   Not tainted  (5.16.11-s3k-dev-01743-g19beecbfe9d6-dirty)
[   16.357849] MSR:  00029032 <EE,ME,IR,DR,RI>  CR: 24002282  XER: 00000000
[   16.357931]
[   16.357931] GPR00: c03fbc9c e68d9be0 c26d06a0 00000039 00000001 c0d36364 c0e96428 00000027
[   16.357931] GPR08: 00000001 00000000 00000023 3fffc000 24002282 100d3dd6 100a2ffc 00000000
[   16.357931] GPR16: 100cd280 100b0000 00000000 aff54f7e 100d0000 100d0000 00000001 100cf328
[   16.357931] GPR24: 100cf328 00000000 00000003 e68d9e30 c156b410 e67ab4c0 e68d9d38 c24ab278
[   16.358253] NIP [c03fbc9c] fsl_spi_cpm_bufs+0x2a0/0x2d8
[   16.358292] LR [c03fbc9c] fsl_spi_cpm_bufs+0x2a0/0x2d8
[   16.358325] Call Trace:
[   16.358336] [e68d9be0] [c03fbc9c] fsl_spi_cpm_bufs+0x2a0/0x2d8 (unreliable)
[   16.358388] [e68d9c00] [c03fcb44] fsl_spi_bufs.isra.0+0x94/0x1a0
[   16.358436] [e68d9c20] [c03fd970] fsl_spi_do_one_msg+0x254/0x3dc
[   16.358483] [e68d9cb0] [c03f7e50] __spi_pump_messages+0x274/0x8a4
[   16.358529] [e68d9ce0] [c03f9d30] __spi_sync+0x344/0x378
[   16.358573] [e68d9d20] [c03fb52c] spi_sync+0x34/0x60
[   16.358616] [e68d9d30] [c03b4dec] at25_ee_read+0x138/0x1a8
[   16.358667] [e68d9e50] [c04a8fb8] bin_attr_nvmem_read+0x98/0x110
[   16.358725] [e68d9e60] [c0204b14] kernfs_fop_read_iter+0xc0/0x1fc
[   16.358774] [e68d9e80] [c0168660] vfs_read+0x284/0x410
[   16.358821] [e68d9f00] [c016925c] ksys_read+0x6c/0x11c
[   16.358863] [e68d9f30] [c00160e0] ret_from_syscall+0x0/0x28
...
[   16.359608] ---[ end trace a4ce3e34afef0cb5 ]---
[   16.359638] fsl_spi b01004c0.spi: unable to map tx dma

This is due to the AT25 driver using buffers on stack, which is not
possible with CONFIG_VMAP_STACK.

As mentionned in kernel Documentation (Documentation/spi/spi-summary.rst):

  - Follow standard kernel rules, and provide DMA-safe buffers in
    your messages.  That way controller drivers using DMA aren't forced
    to make extra copies unless the hardware requires it (e.g. working
    around hardware errata that force the use of bounce buffering).

Modify the driver to use a buffer located in the at25 device structure
which is allocated via kmalloc during probe.

Protect writes in this new buffer with the driver's mutex.

Fixes: b587b13a4f67 ("[PATCH] SPI eeprom driver")
Cc: stable <stable@kernel.org>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/230a9486fc68ea0182df46255e42a51099403642.1648032613.git.christophe.leroy@csgroup.eu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

serial: 8250: Correct the clock for EndRun PTP/1588 PCIe device

commit 637674fa40059cddcc3ad2212728965072f62ea3 upstream.

The EndRun PTP/1588 dual serial port device is based on the Oxford
Semiconductor OXPCIe952 UART device with the PCI vendor:device ID set
for EndRun Technologies and is therefore driven by a fixed 62.5MHz clock
input derived from the 100MHz PCI Express clock. The clock rate is
divided by the oversampling rate of 16 as it is supplied to the baud
rate generator, yielding the baud base of 3906250.

Replace the incorrect baud base of 4000000 with the right value of
3906250 then, complementing commit 6cbe45d8ac93 ("serial: 8250: Correct
the clock for OxSemi PCIe devices").

Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Cc: stable <stable@kernel.org>
Fixes: 1bc8cde46a159 ("8250_pci: Added driver for Endrun Technologies PTP PCIe card.")
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/alpine.DEB.2.21.2204181515270.9383@angie.orcam.me.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

serial: 8250: Also set sticky MCR bits in console restoration

commit 6e6eebdf5e2455f089ccd000754a0deaeb79af82 upstream.

Sticky MCR bits are lost in console restoration if console suspending
has been disabled. This currently affects the AFE bit, which works in
combination with RTS which we set, so we want to make sure the UART
retains control of its FIFO where previously requested. Also specific
drivers may need other bits in the future.

Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Fixes: 4516d50aabed ("serial: 8250: Use canary to restart console after suspend")
Cc: stable@vger.kernel.org # v4.0+
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/alpine.DEB.2.21.2204181518490.9383@angie.orcam.me.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

serial: amba-pl011: do not time out prematurely when draining tx fifo

commit 0e4deb56b0c625efdb70c94f150429e2f2a16fa1 upstream.

The current timeout for draining the tx fifo in RS485 mode is calculated by
multiplying the time it takes to transmit one character (with the given
baud rate) with the maximal number of characters in the tx queue.

This timeout is too short for two reasons:
First when calculating the time to transmit one character integer division
is used which may round down the result in case of a remainder of the
division.

Fix this by rounding up the division result.

Second the hardware may need additional time (e.g for first putting the
characters from the fifo into the shift register) before the characters are
actually put onto the wire.

To be on the safe side double the current maximum number of iterations
that are used to wait for the queue draining.

Fixes: 8d479237727c ("serial: amba-pl011: add RS485 support")
Cc: stable@vger.kernel.org
Signed-off-by: Lino Sanfilippo <LinoSanfilippo@gmx.de>
Link: https://lore.kernel.org/r/20220408233503.7251-1-LinoSanfilippo@gmx.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

serial: imx: fix overrun interrupts in DMA mode

commit 3ee82c6e41f3d2212647ce0bc5a05a0f69097824 upstream.

Commit 76821e222c18 ("serial: imx: ensure that RX irqs are off if RX is
off") accidentally enabled overrun interrupts unconditionally when
deferring DMA enable until after the receiver has been enabled during
startup.

Fix this by using the DMA-initialised instead of DMA-enabled flag to
determine whether overrun interrupts should be enabled.

Note that overrun interrupts are already accounted for in
imx_uart_clear_rx_errors() when using DMA since commit 41d98b5da92f
("serial: imx-serial - update RX error counters when DMA is used").

Fixes: 76821e222c18 ("serial: imx: ensure that RX irqs are off if RX is off")
Cc: stable@vger.kernel.org # 4.17
Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20220411081957.7846-1-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

binder: Address corner cases in deferred copy and fixup

commit 2d1746e3fda0c3612143d7c06f8e1d1830c13e23 upstream.

When handling BINDER_TYPE_FDA object we are pushing a parent fixup
with a certain skip_size but no scatter-gather copy object, since
the copy is handled standalone.
If BINDER_TYPE_FDA is the last children the scatter-gather copy
loop will never stop to skip it, thus we are left with an item in
the parent fixup list. This will trigger the BUG_ON().

This is reproducible in android when playing a video.
We receive a transaction that looks like this:
    obj[0] BINDER_TYPE_PTR, parent
    obj[1] BINDER_TYPE_PTR, child
    obj[2] BINDER_TYPE_PTR, child
    obj[3] BINDER_TYPE_FDA, child

Fixes: 09184ae9b575 ("binder: defer copies of pre-patched txn data")
Acked-by: Todd Kjos <tkjos@google.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Alessandro Astone <ales.astone@gmail.com>
Link: https://lore.kernel.org/r/20220415120015.52684-2-ales.astone@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

binder: Gracefully handle BINDER_TYPE_FDA objects with num_fds=0

commit ef38de9217a04c9077629a24652689d8fdb4c6c6 upstream.

Some android userspace is sending BINDER_TYPE_FDA objects with
num_fds=0. Like the previous patch, this is reproducible when
playing a video.

Before commit 09184ae9b575 BINDER_TYPE_FDA objects with num_fds=0
were 'correctly handled', as in no fixup was performed.

After commit 09184ae9b575 we aggregate fixup and skip regions in
binder_ptr_fixup structs and distinguish between the two by using
the skip_size field: if it's 0, then it's a fixup, otherwise skip.
When processing BINDER_TYPE_FDA objects with num_fds=0 we add a
skip region of skip_size=0, and this causes issues because now
binder_do_deferred_txn_copies will think this was a fixup region.

To address that, return early from binder_translate_fd_array to
avoid adding an empty skip region.

Fixes: 09184ae9b575 ("binder: defer copies of pre-patched txn data")
Acked-by: Todd Kjos <tkjos@google.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Alessandro Astone <ales.astone@gmail.com>
Link: https://lore.kernel.org/r/20220415120015.52684-1-ales.astone@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kernfs: fix NULL dereferencing in kernfs_remove

commit ad8d869343ae4a07a2038a4ca923f699308c8323 upstream.

kernfs_remove supported NULL kernfs_node param to bail out but revent
per-fs lock change introduced regression that dereferencing the
param without NULL check so kernel goes crash.

This patch checks the NULL kernfs_node in kernfs_remove and if so,
just return.

Quote from bug report by Jirka

```
The bug is triggered by running NAS Parallel benchmark suite on
SuperMicro servers with 2x Xeon(R) Gold 6126 CPU. Here is the error
log:

[  247.035564] BUG: kernel NULL pointer dereference, address: 0000000000000008
[  247.036009] #PF: supervisor read access in kernel mode
[  247.036009] #PF: error_code(0x0000) - not-present page
[  247.036009] PGD 0 P4D 0
[  247.036009] Oops: 0000 [#1] PREEMPT SMP PTI
[  247.058060] CPU: 1 PID: 6546 Comm: umount Not tainted
5.16.0393c3714081a53795bbff0e985d24146def6f57f+ #16
[  247.058060] Hardware name: Supermicro Super Server/X11DDW-L, BIOS
2.0b 03/07/2018
[  247.058060] RIP: 0010:kernfs_remove+0x8/0x50
[  247.058060] Code: 4c 89 e0 5b 5d 41 5c 41 5d 41 5e c3 49 c7 c4 f4
ff ff ff eb b2 66 66 2e 0f 1f 84 00 00 00 00 00 66 90 0f 1f 44 00 00
41 54 55 <48> 8b 47 08 48 89 fd 48 85 c0 48 0f 44 c7 4c 8b 60 50 49 83
c4 60
[  247.058060] RSP: 0018:ffffbbfa48a27e48 EFLAGS: 00010246
[  247.058060] RAX: 0000000000000001 RBX: ffffffff89e31f98 RCX: 0000000080200018
[  247.058060] RDX: 0000000080200019 RSI: fffff6760786c900 RDI: 0000000000000000
[  247.058060] RBP: ffffffff89e31f98 R08: ffff926b61b24d00 R09: 0000000080200018
[  247.122048] R10: ffff926b61b24d00 R11: ffff926a8040c000 R12: ffff927bd09a2000
[  247.122048] R13: ffffffff89e31fa0 R14: dead000000000122 R15: dead000000000100
[  247.122048] FS:  00007f01be0a8c40(0000) GS:ffff926fa8e40000(0000)
knlGS:0000000000000000
[  247.122048] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  247.122048] CR2: 0000000000000008 CR3: 00000001145c6003 CR4: 00000000007706e0
[  247.122048] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  247.122048] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[  247.122048] PKRU: 55555554
[  247.122048] Call Trace:
[  247.122048]  <TASK>
[  247.122048]  rdt_kill_sb+0x29d/0x350
[  247.122048]  deactivate_locked_super+0x36/0xa0
[  247.122048]  cleanup_mnt+0x131/0x190
[  247.122048]  task_work_run+0x5c/0x90
[  247.122048]  exit_to_user_mode_prepare+0x229/0x230
[  247.122048]  syscall_exit_to_user_mode+0x18/0x40
[  247.122048]  do_syscall_64+0x48/0x90
[  247.122048]  entry_SYSCALL_64_after_hwframe+0x44/0xae
[  247.122048] RIP: 0033:0x7f01be2d735b
```

Link: https://bugzilla.kernel.org/show_bug.cgi?id=215696
Link: https://lore.kernel.org/lkml/CAE4VaGDZr_4wzRn2___eDYRtmdPaGGJdzu_LCSkJYuY9BEO3cw@mail.gmail.com/
Fixes: 393c3714081a (kernfs: switch global kernfs_rwsem lock to per-fs lock)
Cc: stable@vger.kernel.org
Reported-by: Jirka Hladky <jhladky@redhat.com>
Tested-by: Jirka Hladky <jhladky@redhat.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Minchan Kim <minchan@kernel.org>
Link: https://lore.kernel.org/r/20220427172152.3505364-1-minchan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: phy: generic: Get the vbus supply

commit 03e607cbb2931374db1825f371e9c7f28526d3f4 upstream.

While support for working with a vbus was added, the regulator was never
actually gotten (despite what was documented). Fix this by actually
getting the supply from the device tree.

Fixes: 7acc9973e3c4 ("usb: phy: generic: add vbus support")
Cc: stable <stable@kernel.org>
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Link: https://lore.kernel.org/r/20220425171412.1188485-3-sean.anderson@seco.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: cdns3: Fix issue for clear halt endpoint

commit b3fa25de31fb7e9afebe9599b8ff32eda13d7c94 upstream.

Path fixes bug which occurs during resetting endpoint in
__cdns3_gadget_ep_clear_halt function. During resetting endpoint
controller will change HW/DMA owned TRB. It set Abort flag in
trb->control and will change trb->length field. If driver want
to use the aborted trb it must update the changed field in
TRB.

Fixes: 7733f6c32e36 ("usb: cdns3: Add Cadence USB3 DRD Driver")
cc: <stable@vger.kernel.org>
Acked-by: Peter Chen <peter.chen@kernel.org>
Signed-off-by: Pawel Laszczak <pawell@cadence.com>
Link: https://lore.kernel.org/r/20220329084605.4022-1-pawell@cadence.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: dwc3: pci: add support for the Intel Meteor Lake-P

commit 973e0f7a847ef13ade840d4c30729ce329a66895 upstream.

This patch adds the necessary PCI IDs for Intel Meteor Lake-P
devices.

Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Cc: stable <stable@kernel.org>
Link: https://lore.kernel.org/r/20220425103518.44028-1-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: dwc3: gadget: Return proper request status

commit c7428dbddcf4ea1919e1c8e15f715b94ca359268 upstream.

If the user sets the usb_request's no_interrupt, then there will be no
completion event for the request. Currently the driver incorrectly uses
the event status of a different request to report the status for a
request with no_interrupt. The dwc3 driver needs to check the TRB status
associated with the request when reporting its status.

Note: this is only applicable to missed_isoc TRB completion status, but
the other status are also listed for completeness/documentation.

Fixes: 6d8a019614f3 ("usb: dwc3: gadget: check for Missed Isoc from event status")
Cc: <stable@vger.kernel.org>
Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/db2c80108286cfd108adb05bad52138b78d7c3a7.1650673655.git.Thinh.Nguyen@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: dwc3: core: Only handle soft-reset in DCTL

commit f4fd84ae0765a80494b28c43b756a95100351a94 upstream.

Make sure not to set run_stop bit or link state change request while
initiating soft-reset. Register read-modify-write operation may
unintentionally start the controller before the initialization completes
with its previous DCTL value, which can cause initialization failure.

Fixes: f59dcab17629 ("usb: dwc3: core: improve reset sequence")
Cc: <stable@vger.kernel.org>
Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/6aecbd78328f102003d40ccf18ceeebd411d3703.1650594792.git.Thinh.Nguyen@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: dwc3: core: Fix tx/rx threshold settings

commit f28ad9069363dec7deb88032b70612755eed9ee6 upstream.

The current driver logic checks against 0 to determine whether the
periodic tx/rx threshold settings are set, but we may get bogus values
from uninitialized variables if no device property is set. Properly
default these variables to 0.

Fixes: 938a5ad1d305 ("usb: dwc3: Check for ESS TX/RX threshold config")
Cc: <stable@vger.kernel.org>
Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/cccfce990b11b730b0dae42f9d217dc6fb988c90.1649727139.git.Thinh.Nguyen@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: dwc3: Try usb-role-switch first in dwc3_drd_init

commit ab7aa2866d295438dc60522f85c5421c6b4f1507 upstream.

If the PHY controller node has a "port" dwc3 tries to find an
extcon device even when "usb-role-switch" is present. This happens
because dwc3_get_extcon() sees that "port" node and then calls
extcon_find_edev_by_node() which will always return EPROBE_DEFER
in that case.

On the other hand, even if an extcon was present and dwc3_get_extcon()
was successful it would still be ignored in favor of "usb-role-switch".

Let's just first check if "usb-role-switch" is configured in the device
tree and directly use it instead and only try to look for an extcon
device otherwise.

Fixes: 8a0a13799744 ("usb: dwc3: Registering a role switch in the DRD code.")
Cc: stable <stable@kernel.org>
Signed-off-by: Sven Peter <sven@svenpeter.dev>
Link: https://lore.kernel.org/r/20220411155300.9766-1-sven@svenpeter.dev
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: gadget: configfs: clear deactivation flag in configfs_composite_unbind()

commit bf95c4d4630c7a2c16e7b424fdea5177d9ce0864 upstream.

If any function like UVC is deactivating gadget as part of composition
switch which results in not calling pullup enablement, it is not getting
enabled after switch to new composition due to this deactivation flag
not cleared. This results in USB enumeration not happening after switch
to new USB composition. Hence clear deactivation flag inside gadget
structure in configfs_composite_unbind() before switch to new USB
composition.

Signed-off-by: Vijayavardhan Vennapusa <vvreddy@codeaurora.org>
Signed-off-by: Dan Vacura <w36195@motorola.com>
Cc: stable <stable@kernel.org>
Link: https://lore.kernel.org/r/20220413211038.72797-1-w36195@motorola.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: gadget: uvc: Fix crash when encoding data for usb request

commit 71d471e3faf90c9674cadc7605ac719e82cb7fac upstream.

During the uvcg_video_pump() process, if an error occurs and
uvcg_queue_cancel() is called, the buffer queue will be cleared out, but
the current marker (queue->buf_used) of the active buffer (no longer
active) is not reset. On the next iteration of uvcg_video_pump() the
stale buf_used count will be used and the logic of min((unsigned
int)len, buf->bytesused - queue->buf_used) may incorrectly calculate a
nbytes size, causing an invalid memory access.

[80802.185460][  T315] configfs-gadget gadget: uvc: VS request completed
with status -18.
[80802.185519][  T315] configfs-gadget gadget: uvc: VS request completed
with status -18.
...
uvcg_queue_cancel() is called and the queue is cleared out, but the
marker queue->buf_used is not reset.
...
[80802.262328][ T8682] Unable to handle kernel paging request at virtual
address ffffffc03af9f000
...
...
[80802.263138][ T8682] Call trace:
[80802.263146][ T8682]  __memcpy+0x12c/0x180
[80802.263155][ T8682]  uvcg_video_pump+0xcc/0x1e0
[80802.263165][ T8682]  process_one_work+0x2cc/0x568
[80802.263173][ T8682]  worker_thread+0x28c/0x518
[80802.263181][ T8682]  kthread+0x160/0x170
[80802.263188][ T8682]  ret_from_fork+0x10/0x18
[80802.263198][ T8682] Code: a8c12829 a88130cb a8c130

Fixes: d692522577c0 ("usb: gadget/uvc: Port UVC webcam gadget to use videobuf2 framework")
Cc: <stable@vger.kernel.org>
Signed-off-by: Dan Vacura <w36195@motorola.com>
Link: https://lore.kernel.org/r/20220331184024.23918-1-w36195@motorola.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: typec: ucsi: Fix role swapping

commit eb5d7ff3cf0d55093c619b5ad107cd5c05ce8134 upstream.

All attempts to swap the roles timed out because the
completion was done without releasing the port lock. Fixing
that by releasing the lock before starting to wait for the
completion.

Link: https://lore.kernel.org/linux-usb/037de7ac-e210-bdf5-ec7a-8c0c88a0be20@gmail.com/
Fixes: ad74b8649bea ("usb: typec: ucsi: Preliminary support for alternate modes")
Cc: stable@vger.kernel.org
Reported-and-tested-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20220405134824.68067-3-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: typec: ucsi: Fix reuse of completion structure

commit e25adcca917d7e4cdc1dc6444d0692ffda7594bf upstream.

The role swapping completion variable is reused, so it needs
to be reinitialised every time. Otherwise it will be marked
as done after the first time it's used and completing
immediately.

Link: https://lore.kernel.org/linux-usb/20220325203959.GA19752@jackp-linux.qualcomm.com/
Fixes: 6df475f804e6 ("usb: typec: ucsi: Start using struct typec_operations")
Cc: stable@vger.kernel.org
Reported-and-suggested-by: Jack Pham <quic_jackp@quicinc.com>
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20220405134824.68067-2-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: core: Don't hold the device lock while sleeping in do_proc_control()

commit 0543e4e8852ef5ff1809ae62f1ea963e2ab23b66 upstream.

Since commit ae8709b296d8 ("USB: core: Make do_proc_control() and
do_proc_bulk() killable") if a device has the USB_QUIRK_DELAY_CTRL_MSG
quirk set, it will temporarily block all other URBs (e.g. interrupts)
while sleeping due to a control.

This results in noticeable delays when, for example, a userspace usbfs
application is sending URB interrupts at a high rate to a keyboard and
simultaneously updates the lock indicators using controls. Interrupts
with direction set to IN are also affected by this, meaning that
delivery of HID reports (containing scancodes) to the usbfs application
is delayed as well.

This patch fixes the regression by calling msleep() while the device
mutex is unlocked, as was the case originally with usb_control_msg().

Fixes: ae8709b296d8 ("USB: core: Make do_proc_control() and do_proc_bulk() killable")
Cc: stable <stable@kernel.org>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Tasos Sahanidis <tasos@tasossah.com>
Link: https://lore.kernel.org/r/3e299e2a-13b9-ddff-7fee-6845e868bc06@tasossah.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: misc: fix improper handling of refcount in uss720_probe()

commit 0a96fa640dc928da9eaa46a22c46521b037b78ad upstream.

usb_put_dev shouldn't be called when uss720_probe succeeds because of
priv->usbdev. At the same time, priv->usbdev shouldn't be set to NULL
before destroy_priv in uss720_disconnect because usb_put_dev is in
destroy_priv.

Fix this by moving priv->usbdev = NULL after usb_put_dev.

Fixes: dcb4b8ad6a44 ("misc/uss720: fix memory leak in uss720_probe")
Cc: stable <stable@kernel.org>
Reviewed-by: Dongliang Mu <mudongliangabcd@gmail.com>
Signed-off-by: Hangyu Hua <hbh25y@gmail.com>
Link: https://lore.kernel.org/r/20220407024001.11761-1-hbh25y@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: imu: inv_icm42600: Fix I2C init possible nack

commit b5d6ba09b10d2ccb865ed9bc45941db0a41c6756 upstream.

This register write to REG_INTF_CONFIG6 enables a spike filter that
is impacting the line and can prevent the I2C ACK to be seen by the
controller. So we don't test the return value.

Fixes: 7297ef1e261672b8 ("iio: imu: inv_icm42600: add I2C driver")
Signed-off-by: Fawzi Khaber <fawzi.khaber@tdk.com>
Signed-off-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
Link: https://lore.kernel.org/r/20220411111533.5826-1-jmaneyrol@invensense.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: magnetometer: ak8975: Fix the error handling in ak8975_power_on()

commit 3a26787dacf04257a68b16315c984eb2c340bc5e upstream.

When the driver fails to enable the regulator 'vid', we will get the
following splat:

[   79.955610] WARNING: CPU: 5 PID: 441 at drivers/regulator/core.c:2257 _regulator_put+0x3ec/0x4e0
[   79.959641] RIP: 0010:_regulator_put+0x3ec/0x4e0
[   79.967570] Call Trace:
[   79.967773]  <TASK>
[   79.967951]  regulator_put+0x1f/0x30
[   79.968254]  devres_release_group+0x319/0x3d0
[   79.968608]  i2c_device_probe+0x766/0x940

Fix this by disabling the 'vdd' regulator when failing to enable 'vid'
regulator.

Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Link: https://lore.kernel.org/r/20220409034849.3717231-2-zheyuma97@gmail.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: dac: ad5446: Fix read_raw not returning set value

commit 89a01cd688d3c0ac983ef0b0e5f40018ab768317 upstream.

read_raw should return the un-scaled value.

Fixes: 5e06bdfb46e8b ("staging:iio:dac:ad5446: Return cached value for 'raw' attribute")
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20220406105620.1171340-1-michael.hennerich@analog.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: scd4x: check return of scd4x_write_and_fetch

commit f50232193e61cf89a73130b5e843fef30763c428 upstream.

Clang static analysis reports this problem
scd4x.c:474:10: warning: The left operand of '==' is a
  garbage value
  if (val == 0xff) {
      ~~~ ^
val is only set from a successful call to scd4x_write_and_fetch()
So check it's return.

Fixes: 49d22b695cbb ("drivers: iio: chemical: Add support for Sensirion SCD4x CO2 sensor")
Signed-off-by: Tom Rix <trix@redhat.com>
Link: https://lore.kernel.org/r/20220301025223.223223-1-trix@redhat.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: dac: ad5592r: Fix the missing return value.

commit b55b38f7cc12da3b9ef36e7a3b7f8f96737df4d5 upstream.

The third call to `fwnode_property_read_u32` did not record
the return value, resulting in `channel_offstate` possibly
being assigned the wrong value.

Fixes: 56ca9db862bf ("iio: dac: Add support for the AD5592R/AD5593R ADCs/DACs")
Signed-off-by: Zizhuang Deng <sunsetdzz@gmail.com>
Link: https://lore.kernel.org/r/20220310125450.4164164-1-sunsetdzz@gmail.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xhci: increase usb U3 -> U0 link resume timeout from 100ms to 500ms

commit 33597f0c48be0836854d43c577e35c8f8a765a7d upstream.

The first U3 wake signal by the host may be lost if the USB 3 connection is
tunneled over USB4, with a runtime suspended USB4 host, and firmware
implemented connection manager.

Specs state the host must wait 100ms (tU3WakeupRetryDelay) before
resending a U3 wake signal if device doesn't respond, leading to U3 -> U0
link transition times around 270ms in the tunneled case.

Fixes: 0200b9f790b0 ("xhci: Wait until link state trainsits to U0 after setting USB_SS_PORT_LS_U0")
Cc: stable@vger.kernel.org
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20220408134823.2527272-4-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xhci: stop polling roothubs after shutdown

commit dc92944a014cd6a6f6c94299aaa36164dd2c238a upstream.

While rebooting, XHCI controller and its bus device will be shut down
in order by .shutdown callback. Stopping roothubs polling in
xhci_shutdown() can prevent XHCI driver from accessing port status
after its bus device shutdown.

Take PCIe XHCI controller as example, if XHCI driver doesn't stop roothubs
polling, XHCI driver may access PCIe BAR register for port status after
parent PCIe root port driver is shutdown and cause PCIe bus error.

[check shared hcd exist before stopping its roothub polling -Mathias]

Cc: stable@vger.kernel.org
Signed-off-by: Henry Lin <henryl@nvidia.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20220408134823.2527272-3-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xhci: Enable runtime PM on second Alderlake controller

commit d8bfe5091d6cc4b8b8395e4666979ae72a6069ca upstream.

Alderlake has two XHCI controllers with PCI IDs 0x461e and 0x51ed. We
had previously added the quirk to default enable runtime PM for 0x461e,
now add it for 0x51ed as well.

Signed-off-by: Evan Green <evgreen@chromium.org>
Cc: stable <stable@kernel.org>
Link: https://lore.kernel.org/r/20220408114225.1.Ibcff6b86ed4eacfe4c4bc89c90e18416f3900a3e@changeid
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: xhci: tegra:Fix PM usage reference leak of tegra_xusb_unpowergate_partitions

commit 8771039482d965bdc8cefd972bcabac2b76944a8 upstream.

pm_runtime_get_sync will increment pm usage counter
even it failed. Forgetting to putting operation will
result in reference leak here. We fix it by replacing
it with pm_runtime_resume_and_get to keep usage counter
balanced.

Fixes: 41a7426d25fa ("usb: xhci: tegra: Unlink power domain devices")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Link: https://lore.kernel.org/r/20220319023822.145641-1-zhangqilong3@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: option: add Telit 0x1057, 0x1058, 0x1075 compositions

commit f32c5a0423400e01f4d7c607949fa3a1f006e8fa upstream.

Add support for the following Telit FN980 and FN990 compositions:

0x1057: tty, adb, rmnet, tty, tty, tty, tty, tty
0x1058: tty, adb, tty, tty, tty, tty, tty
0x1075: adb, tty

Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
Link: https://lore.kernel.org/r/20220406141408.580669-1-dnlplm@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: option: add support for Cinterion MV32-WA/MV32-WB

commit b4a64ed6e7b857317070fcb9d87ff5d4a73be3e8 upstream.

Add support for Cinterion device MV32-WA/MV32-WB. MV32-WA PID is
0x00F1, and MV32-WB PID is 0x00F2.

Test evidence as below:
T:  Bus=04 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#=  4 Spd=5000 MxCh= 0
D:  Ver= 3.20 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs=  1
P:  Vendor=1e2d ProdID=00f1 Rev=05.04
S:  Manufacturer=Cinterion
S:  Product=Cinterion PID 0x00F1 USB Mobile Broadband
S:  SerialNumber=78ada8c4
C:  #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=896mA
I:  If#=0x0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim
I:  If#=0x1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
I:  If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
I:  If#=0x3 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
I:  If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option
I:  If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option

T:  Bus=04 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#=  3 Spd=5000 MxCh= 0
D:  Ver= 3.20 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs=  1
P:  Vendor=1e2d ProdID=00f2 Rev=05.04
S:  Manufacturer=Cinterion
S:  Product=Cinterion PID 0x00F2 USB Mobile Broadband
S:  SerialNumber=cdd06a78
C:  #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=896mA
I:  If#=0x0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim
I:  If#=0x1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
I:  If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
I:  If#=0x3 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
I:  If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option
I:  If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option

Interface 0&1: MBIM, 2:Modem, 3: GNSS, 4: NMEA, 5: Diag
GNSS port don't use serial driver.

Signed-off-by: Slark Xiao <slark_xiao@163.com>
Link: https://lore.kernel.org/r/20220414074434.5699-1-slark_xiao@163.com
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: cp210x: add PIDs for Kamstrup USB Meter Reader

commit 35a923a0b329c343e9e81d79518e2937eba06fcd upstream.

Wireless reading of water and heat meters using 868 MHz wM-Bus mode C1.

The two different product IDs allow detection of dongle antenna
solution:
- Internal antenna
- External antenna using SMA connector

https://www.kamstrup.com/en-en/water-solutions/water-meter-reading/usb-meter-reader

Signed-off-by: Bruno Thomsen <bruno.thomsen@gmail.com>
Link: https://lore.kernel.org/r/20220414081202.5591-1-bruno.thomsen@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: whiteheat: fix heap overflow in WHITEHEAT_GET_DTR_RTS

commit e23e50e7acc8d8f16498e9c129db33e6a00e80eb upstream.

The sizeof(struct whitehat_dr_info) can be 4 bytes under CONFIG_AEABI=n
due to "-mabi=apcs-gnu", even though it has a single u8:

whiteheat_private {
        __u8                       mcr;                  /*     0     1 */

        /* size: 4, cachelines: 1, members: 1 */
        /* padding: 3 */
        /* last cacheline: 4 bytes */
};

The result is technically harmless, as both the source and the
destinations are currently the same allocation size (4 bytes) and don't
use their padding, but if anything were to ever be added after the
"mcr" member in "struct whiteheat_private", it would be overwritten. The
structs both have a single u8 "mcr" member, but are 4 bytes in padded
size. The memcpy() destination was explicitly targeting the u8 member
(size 1) with the length of the whole structure (size 4), triggering
the memcpy buffer overflow warning:

In file included from include/linux/string.h:253,
                 from include/linux/bitmap.h:11,
                 from include/linux/cpumask.h:12,
                 from include/linux/smp.h:13,
                 from include/linux/lockdep.h:14,
                 from include/linux/spinlock.h:62,
                 from include/linux/mmzone.h:8,
                 from include/linux/gfp.h:6,
                 from include/linux/slab.h:15,
                 from drivers/usb/serial/whiteheat.c:17:
In function 'fortify_memcpy_chk',
    inlined from 'firm_send_command' at drivers/usb/serial/whiteheat.c:587:4:
include/linux/fortify-string.h:328:25: warning: call to '__write_overflow_field' declared with attribute warning: detected write beyond size of field (1st parameter); maybe use struct_group()? [-Wattribute-warning]
  328 |                         __write_overflow_field(p_size_field, size);
      |                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Instead, just assign the one byte directly.

Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/lkml/202204142318.vDqjjSFn-lkp@intel.com
Cc: stable@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20220421001234.2421107-1-keescook@chromium.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: quirks: add STRING quirk for VCOM device

commit ec547af8a9ea6441864bad34172676b5652ceb96 upstream.

This has been reported to stall if queried

Cc: stable <stable@vger.kernel.org>
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Link: https://lore.kernel.org/r/20220414123152.1700-1-oneukum@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: quirks: add a Realtek card reader

commit 2a7ccf6bb6f147f64c025ad68f4255d8e1e0ce6d upstream.

This device is reported to stall when enummerated.

Cc: stable <stable@vger.kernel.org>
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Link: https://lore.kernel.org/r/20220414110209.30924-1-oneukum@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

floppy: disable FDRAWCMD by default

commit 233087ca063686964a53c829d547c7571e3f67bf upstream.

Minh Yuan reported a concurrency use-after-free issue in the floppy code
between raw_cmd_ioctl and seek_interrupt.

[ It turns out this has been around, and that others have reported the
  KASAN splats over the years, but Minh Yuan had a reproducer for it and
  so gets primary credit for reporting it for this fix   - Linus ]

The problem is, this driver tends to break very easily and nowadays,
nobody is expected to use FDRAWCMD anyway since it was used to
manipulate non-standard formats.  The risk of breaking the driver is
higher than the risk presented by this race, and accessing the device
requires privileges anyway.

Let's just add a config option to completely disable this ioctl and
leave it disabled by default.  Distros shouldn't use it, and only those
running on antique hardware might need to enable it.

Link: https://lore.kernel.org/all/000000000000b71cdd05d703f6bf@google.com/
Link: https://lore.kernel.org/lkml/CAKcFiNC=MfYVW-Jt9A3=FPJpTwCD2PL_ULNCpsCVE5s8ZeBQgQ@mail.gmail.com
Link: https://lore.kernel.org/all/CAEAjamu1FRhz6StCe_55XY5s389ZP_xmCF69k987En+1z53=eg@mail.gmail.com
Reported-by: Minh Yuan <yuanmingbuaa@gmail.com>
Reported-by: syzbot+8e8958586909d62b6840@syzkaller.appspotmail.com
Reported-by: cruise k <cruise4k@gmail.com>
Reported-by: Kyungtae Kim <kt0755@gmail.com>
Suggested-by: Linus Torvalds <torvalds@linuxfoundation.org>
Tested-by: Denis Efremov <efremov@linux.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: mtu3: fix USB 3.0 dual-role-switch from device to host

commit 456244aeecd54249096362a173dfe06b82a5cafa upstream.

Issue description:
  When an OTG port has been switched to device role and then switch back
  to host role again, the USB 3.0 Host (XHCI) will not be able to detect
  "plug in event of a connected USB 2.0/1.0 ((Highspeed and Fullspeed)
  devices until system reboot.

Root cause and Solution:
  There is a condition checking flag "ssusb->otg_switch.is_u3_drd" in
  toggle_opstate(). At the end of role switch procedure, toggle_opstate()
  will be called to set DC_SESSION and SOFT_CONN bit. If "is_u3_drd" was
  set and switched the role to USB host 3.0, bit DC_SESSION and SOFT_CONN
  will be skipped hence caused the port cannot detect connected USB 2.0
  (Highspeed and Fullspeed) devices. Simply remove the condition check to
  solve this issue.

Fixes: d0ed062a8b75 ("usb: mtu3: dual-role mode support")
Cc: stable@vger.kernel.org
Tested-by: Fabien Parent <fparent@baylibre.com>
Reviewed-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com>
Signed-off-by: Tainping Fang <tianping.fang@mediatek.com>
Link: https://lore.kernel.org/r/20220419081245.21015-1-macpaul.lin@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 5.17.5

Link: https://lore.kernel.org/r/20220426081750.051179617@linuxfoundation.org
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Justin M. Forbes <jforbes@fedoraproject.org>
Tested-by: Ron Economos <re@w6rz.net>
Tested-by: Zan Aziz <zanaziz313@gmail.com>
Tested-by: Slade Watkins <slade@sladewatkins.com>
Tested-by: Jiri Slaby <jirislaby@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: dts: qcom: add IPA qcom,qmp property

commit 73419e4d2fd1b838fcb1df6a978d67b3ae1c5c01 upstream.

At least three platforms require the "qcom,qmp" property to be
specified, so the IPA driver can request register retention across
power collapse. Update DTS files accordingly.

Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220201140723.467431-1-elder@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

io_uring: fix leaks on IOPOLL and CQE_SKIP

commit c0713540f6d55c53dca65baaead55a5a8b20552d upstream.

If all completed requests in io_do_iopoll() were marked with
REQ_F_CQE_SKIP, we'll not only skip CQE posting but also
io_free_batch_list() leaking memory and resources.

Move @nr_events increment before REQ_F_CQE_SKIP check. We'll potentially
return the value greater than the real one, but iopolling will deal with
it and the userspace will re-iopoll if needed. In anyway, I don't think
there are many use cases for REQ_F_CQE_SKIP + IOPOLL.

Fixes: 83a13a4181b0e ("io_uring: tweak iopoll CQE_SKIP event counting")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/5072fc8693fbfd595f89e5d4305bfcfd5d2f0a64.1650186611.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: SOF: topology: cleanup dailinks on widget unload

commit 20744617bdbafe2e7fb7bf5401f616e24bde4471 upstream.

We set the cpu_dai capture_ or playback_widget on widget_ready but
never clear them, which leads to failures when unloading/reloading a
topology in modprobe/rmmod tests

BugLink: https://github.com/thesofproject/linux/issues/3535
Fixes: 311ce4fe7637 ("ASoC: SOF: Add support for loading topologies")
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220406191606.254576-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

spi: atmel-quadspi: Fix the buswidth adjustment between spi-mem and controller

commit 8c235cc25087495c4288d94f547e9d3061004991 upstream.

Use the spi_mem_default_supports_op() core helper in order to take into
account the buswidth specified by the user in device tree.

Cc: <stable@vger.kernel.org>
Fixes: 0e6aae08e9ae ("spi: Add QuadSPI driver for Atmel SAMA5D2")
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Link: https://lore.kernel.org/r/20220406133604.455356-1-tudor.ambarus@microchip.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

jbd2: fix a potential race while discarding reserved buffers after an abort

commit 23e3d7f7061f8682c751c46512718f47580ad8f0 upstream.

we got issue as follows:
[   72.796117] EXT4-fs error (device sda): ext4_journal_check_start:83: comm fallocate: Detected aborted journal
[   72.826847] EXT4-fs (sda): Remounting filesystem read-only
fallocate: fallocate failed: Read-only file system
[   74.791830] jbd2_journal_commit_transaction: jh=0xffff9cfefe725d90 bh=0x0000000000000000 end delay
[   74.793597] ------------[ cut here ]------------
[   74.794203] kernel BUG at fs/jbd2/transaction.c:2063!
[   74.794886] invalid opcode: 0000 [#1] PREEMPT SMP PTI
[   74.795533] CPU: 4 PID: 2260 Comm: jbd2/sda-8 Not tainted 5.17.0-rc8-next-20220315-dirty #150
[   74.798327] RIP: 0010:__jbd2_journal_unfile_buffer+0x3e/0x60
[   74.801971] RSP: 0018:ffffa828c24a3cb8 EFLAGS: 00010202
[   74.802694] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
[   74.803601] RDX: 0000000000000001 RSI: ffff9cfefe725d90 RDI: ffff9cfefe725d90
[   74.804554] RBP: ffff9cfefe725d90 R08: 0000000000000000 R09: ffffa828c24a3b20
[   74.805471] R10: 0000000000000001 R11: 0000000000000001 R12: ffff9cfefe725d90
[   74.806385] R13: ffff9cfefe725d98 R14: 0000000000000000 R15: ffff9cfe833a4d00
[   74.807301] FS:  0000000000000000(0000) GS:ffff9d01afb00000(0000) knlGS:0000000000000000
[   74.808338] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   74.809084] CR2: 00007f2b81bf4000 CR3: 0000000100056000 CR4: 00000000000006e0
[   74.810047] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[   74.810981] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[   74.811897] Call Trace:
[   74.812241]  <TASK>
[   74.812566]  __jbd2_journal_refile_buffer+0x12f/0x180
[   74.813246]  jbd2_journal_refile_buffer+0x4c/0xa0
[   74.813869]  jbd2_journal_commit_transaction.cold+0xa1/0x148
[   74.817550]  kjournald2+0xf8/0x3e0
[   74.819056]  kthread+0x153/0x1c0
[   74.819963]  ret_from_fork+0x22/0x30

Above issue may happen as follows:
        write                   truncate                   kjournald2
generic_perform_write
ext4_write_begin
  ext4_walk_page_buffers
   do_journal_get_write_access ->add BJ_Reserved list
ext4_journalled_write_end
  ext4_walk_page_buffers
   write_end_fn
    ext4_handle_dirty_metadata
                ***************JBD2 ABORT**************
     jbd2_journal_dirty_metadata
-> return -EROFS, jh in reserved_list
                                                   jbd2_journal_commit_transaction
                                                    while (commit_transaction->t_reserved_list)
                                                      jh = commit_transaction->t_reserved_list;
                        truncate_pagecache_range
                         do_invalidatepage
  ext4_journalled_invalidatepage
   jbd2_journal_invalidatepage
    journal_unmap_buffer
     __dispose_buffer
      __jbd2_journal_unfile_buffer
       jbd2_journal_put_journal_head ->put last ref_count
        __journal_remove_journal_head
bh->b_private = NULL;
jh->b_bh = NULL;
                      jbd2_journal_refile_buffer(journal, jh);
bh = jh2bh(jh);
->bh is NULL, later will trigger null-ptr-deref
journal_free_journal_head(jh);

After commit 96f1e0974575, we no longer hold the j_state_lock while
iterating over the list of reserved handles in
jbd2_journal_commit_transaction().  This potentially allows the
journal_head to be freed by journal_unmap_buffer while the commit
codepath is also trying to free the BJ_Reserved buffers.  Keeping
j_state_lock held while trying extends hold time of the lock
minimally, and solves this issue.

Fixes: 96f1e0974575("jbd2: avoid long hold times of j_state_lock while committing a transaction")
Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220317142137.1821590-1-yebin10@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: update the cached overhead value in the superblock

commit eb7054212eac8b451d727bf079eae3db8c88f9d3 upstream.

If we (re-)calculate the file system overhead amount and it's
different from the on-disk s_overhead_clusters value, update the
on-disk version since this can take potentially quite a while on
bigalloc file systems.

Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: force overhead calculation if the s_overhead_cluster makes no sense

commit 85d825dbf4899a69407338bae462a59aa9a37326 upstream.

If the file system does not use bigalloc, calculating the overhead is
cheap, so force the recalculation of the overhead so we don't have to
trust the precalculated overhead in the superblock.

Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: fix overhead calculation to account for the reserved gdt blocks

commit 10b01ee92df52c8d7200afead4d5e5f55a5c58b1 upstream.

The kernel calculation was underestimating the overhead by not taking
into account the reserved gdt blocks. With this change, the overhead
calculated by the kernel matches the overhead calculation in mke2fs.

Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4, doc: fix incorrect h_reserved size

commit 7102ffe4c166ca0f5e35137e9f9de83768c2d27d upstream.

According to document and code, ext4_xattr_header's size is 32 bytes, so
h_reserved size should be 3.

Signed-off-by: Wang Jianjian <wangjianjian3@huawei.com>
Link: https://lore.kernel.org/r/92fcc3a6-7d77-8c09-4126-377fcb4c46a5@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: limit length to bitmap_maxbytes - blocksize in punch_hole

commit 2da376228a2427501feb9d15815a45dbdbdd753e upstream.

Syzbot found an issue [1] in ext4_fallocate().
The C reproducer [2] calls fallocate(), passing size 0xffeffeff000ul,
and offset 0x1000000ul, which, when added together exceed the
bitmap_maxbytes for the inode. This triggers a BUG in
ext4_ind_remove_space(). According to the comments in this function
the 'end' parameter needs to be one block after the last block to be
removed. In the case when the BUG is triggered it points to the last
block. Modify the ext4_punch_hole() function and add constraint that
caps the length to satisfy the one before laster block requirement.

LINK: [1] https://syzkaller.appspot.com/bug?id=b80bd9cf348aac724a4f4dff251800106d721331
LINK: [2] https://syzkaller.appspot.com/text?tag=ReproC&x=14ba0238700000

Fixes: a4bb6b64e39a ("ext4: enable "punch hole" functionality")
Reported-by: syzbot+7a806094edd5d07ba029@syzkaller.appspotmail.com
Signed-off-by: Tadeusz Struk <tadeusz.struk@linaro.org>
Link: https://lore.kernel.org/r/20220331200515.153214-1-tadeusz.struk@linaro.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: fix use-after-free in ext4_search_dir

commit c186f0887fe7061a35cebef024550ec33ef8fbd8 upstream.

We got issue as follows:
EXT4-fs (loop0): mounted filesystem without journal. Opts: ,errors=continue
==================================================================
BUG: KASAN: use-after-free in ext4_search_dir fs/ext4/namei.c:1394 [inline]
BUG: KASAN: use-after-free in search_dirblock fs/ext4/namei.c:1199 [inline]
BUG: KASAN: use-after-free in __ext4_find_entry+0xdca/0x1210 fs/ext4/namei.c:1553
Read of size 1 at addr ffff8881317c3005 by task syz-executor117/2331

CPU: 1 PID: 2331 Comm: syz-executor117 Not tainted 5.10.0+ #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014
Call Trace:
__dump_stack lib/dump_stack.c:83 [inline]
dump_stack+0x144/0x187 lib/dump_stack.c:124
print_address_description+0x7d/0x630 mm/kasan/report.c:387
__kasan_report+0x132/0x190 mm/kasan/report.c:547
kasan_report+0x47/0x60 mm/kasan/report.c:564
ext4_search_dir fs/ext4/namei.c:1394 [inline]
search_dirblock fs/ext4/namei.c:1199 [inline]
__ext4_find_entry+0xdca/0x1210 fs/ext4/namei.c:1553
ext4_lookup_entry fs/ext4/namei.c:1622 [inline]
ext4_lookup+0xb8/0x3a0 fs/ext4/namei.c:1690
__lookup_hash+0xc5/0x190 fs/namei.c:1451
do_rmdir+0x19e/0x310 fs/namei.c:3760
do_syscall_64+0x33/0x40 arch/x86/entry/common.c:46
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x445e59
Code: 4d c7 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 1b c7 fb ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007fff2277fac8 EFLAGS: 00000246 ORIG_RAX: 0000000000000054
RAX: ffffffffffffffda RBX: 0000000000400280 RCX: 0000000000445e59
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 00000000200000c0
RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000002
R10: 00007fff2277f990 R11: 0000000000000246 R12: 0000000000000000
R13: 431bde82d7b634db R14: 0000000000000000 R15: 0000000000000000

The buggy address belongs to the page:
page:0000000048cd3304 refcount:0 mapcount:0 mapping:0000000000000000 index:0x1 pfn:0x1317c3
flags: 0x200000000000000()
raw: 0200000000000000 ffffea0004526588 ffffea0004528088 0000000000000000
raw: 0000000000000001 0000000000000000 00000000ffffffff 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
ffff8881317c2f00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ffff8881317c2f80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>ffff8881317c3000: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
                   ^
ffff8881317c3080: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ffff8881317c3100: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
==================================================================

ext4_search_dir:
  ...
  de = (struct ext4_dir_entry_2 *)search_buf;
  dlimit = search_buf + buf_size;
  while ((char *) de < dlimit) {
  ...
    if ((char *) de + de->name_len <= dlimit &&
ext4_match(dir, fname, de)) {
    ...
    }
  ...
    de_len = ext4_rec_len_from_disk(de->rec_len, dir->i_sb->s_blocksize);
    if (de_len <= 0)
      return -1;
    offset += de_len;
    de = (struct ext4_dir_entry_2 *) ((char *) de + de_len);
  }

Assume:
de=0xffff8881317c2fff
dlimit=0x0xffff8881317c3000

If read 'de->name_len' which address is 0xffff8881317c3005, obviously is
out of range, then will trigger use-after-free.
To solve this issue, 'dlimit' must reserve 8 bytes, as we will read
'de->name_len' to judge if '(char *) de + de->name_len' out of range.

Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220324064816.1209985-1-yebin10@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: fix symlink file size not match to file content

commit a2b0b205d125f27cddfb4f7280e39affdaf46686 upstream.

We got issue as follows:
[home]# fsck.ext4 -fn ram0yb
e2fsck 1.45.6 (20-Mar-2020)
Pass 1: Checking inodes, blocks, and sizes
Pass 2: Checking directory structure
Symlink /p3/d14/d1a/l3d (inode #3494) is invalid.
Clear? no
Entry 'l3d' in /p3/d14/d1a (3383) has an incorrect filetype (was 7, should be 0).
Fix? no

As the symlink file size does not match the file content. If the writeback
of the symlink data block failed, ext4_finish_bio() handles the end of IO.
However this function fails to mark the buffer with BH_write_io_error and
so when unmount does journal checkpoint it cannot detect the writeback
error and will cleanup the journal. Thus we've lost the correct data in the
journal area. To solve this issue, mark the buffer as BH_write_io_error in
ext4_finish_bio().

Cc: stable@kernel.org
Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220321144438.201685-1-yebin10@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: fix fallocate to use file_modified to update permissions consistently

commit ad5cd4f4ee4d5fcdb1bfb7a0c073072961e70783 upstream.

Since the initial introduction of (posix) fallocate back at the turn of
the century, it has been possible to use this syscall to change the
user-visible contents of files. This can happen by extending the file
size during a preallocation, or through any of the newer modes (punch,
zero, collapse, insert range). Because the call can be used to change
file contents, we should treat it like we do any other modification to a
file -- update the mtime, and drop set[ug]id privileges/capabilities.

The VFS function file_modified() does all this for us if pass it a
locked inode, so let's make fallocate drop permissions correctly.

Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Link: https://lore.kernel.org/r/20220308185043.GA117678@magnolia
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: SVM: Flush when freeing encrypted pages even on SME_COHERENT CPUs

commit d45829b351ee6ec5f54dd55e6aca1f44fe239fe6 upstream.

Use clflush_cache_range() to flush the confidential memory when
SME_COHERENT is supported in AMD CPU. Cache flush is still needed since
SME_COHERENT only support cache invalidation at CPU side. All confidential
cache lines are still incoherent with DMA devices.

Cc: stable@vger.kerel.org
Fixes: add5e2f04541 ("KVM: SVM: Add support for the SEV-ES VMSA")
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Mingwei Zhang <mizhang@google.com>
Message-Id: <20220421031407.2516575-3-mizhang@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: SVM: Simplify and harden helper to flush SEV guest page(s)

commit 4bbef7e8eb8c2c7dabf57d97decfd2b4f48aaf02 upstream.

Rework sev_flush_guest_memory() to explicitly handle only a single page,
and harden it to fall back to WBINVD if VM_PAGE_FLUSH fails.  Per-page
flushing is currently used only to flush the VMSA, and in its current
form, the helper is completely broken with respect to flushing actual
guest memory, i.e. won't work correctly for an arbitrary memory range.

VM_PAGE_FLUSH takes a host virtual address, and is subject to normal page
walks, i.e. will fault if the address is not present in the host page
tables or does not have the correct permissions.  Current AMD CPUs also
do not honor SMAP overrides (undocumented in kernel versions of the APM),
so passing in a userspace address is completely out of the question.  In
other words, KVM would need to manually walk the host page tables to get
the pfn, ensure the pfn is stable, and then use the direct map to invoke
VM_PAGE_FLUSH.  And the latter might not even work, e.g. if userspace is
particularly evil/clever and backs the guest with Secret Memory (which
unmaps memory from the direct map).

Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes: add5e2f04541 ("KVM: SVM: Add support for the SEV-ES VMSA")
Reported-by: Mingwei Zhang <mizhang@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mingwei Zhang <mizhang@google.com>
Message-Id: <20220421031407.2516575-2-mizhang@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: nVMX: Defer APICv updates while L2 is active until L1 is active

commit 7c69661e225cc484fbf44a0b99b56714a5241ae3 upstream.

Defer APICv updates that occur while L2 is active until nested VM-Exit,
i.e. until L1 regains control.  vmx_refresh_apicv_exec_ctrl() assumes L1
is active and (a) stomps all over vmcs02 and (b) neglects to ever updated
vmcs01.  E.g. if vmcs12 doesn't enable the TPR shadow for L2 (and thus no
APICv controls), L1 performs nested VM-Enter APICv inhibited, and APICv
becomes unhibited while L2 is active, KVM will set various APICv controls
in vmcs02 and trigger a failed VM-Entry.  The kicker is that, unless
running with nested_early_check=1, KVM blames L1 and chaos ensues.

In all cases, ignoring vmcs02 and always deferring the inhibition change
to vmcs01 is correct (or at least acceptable).  The ABSENT and DISABLE
inhibitions cannot truly change while L2 is active (see below).

IRQ_BLOCKING can change, but it is firmly a best effort debug feature.
Furthermore, only L2's APIC is accelerated/virtualized to the full extent
possible, e.g. even if L1 passes through its APIC to L2, normal MMIO/MSR
interception will apply to the virtual APIC managed by KVM.
The exception is the SELF_IPI register when x2APIC is enabled, but that's
an acceptable hole.

Lastly, Hyper-V's Auto EOI can technically be toggled if L1 exposes the
MSRs to L2, but for that to work in any sane capacity, L1 would need to
pass through IRQs to L2 as well, and IRQs must be intercepted to enable
virtual interrupt delivery.  I.e. exposing Auto EOI to L2 and enabling
VID for L2 are, for all intents and purposes, mutually exclusive.

Lack of dynamic toggling is also why this scenario is all but impossible
to encounter in KVM's current form.  But a future patch will pend an
APICv update request _during_ vCPU creation to plug a race where a vCPU
that's being created doesn't get included in the "all vCPUs request"
because it's not yet visible to other vCPUs.  If userspaces restores L2
after VM creation (hello, KVM selftests), the first KVM_RUN will occur
while L2 is active and thus service the APICv update request made during
VM creation.

Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220420013732.3308816-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: x86: Pend KVM_REQ_APICV_UPDATE during vCPU creation to fix a race

commit 423ecfea77dda83823c71b0fad1c2ddb2af1e5fc upstream.

Make a KVM_REQ_APICV_UPDATE request when creating a vCPU with an
in-kernel local APIC and APICv enabled at the module level.  Consuming
kvm_apicv_activated() and stuffing vcpu->arch.apicv_active directly can
race with __kvm_set_or_clear_apicv_inhibit(), as vCPU creation happens
before the vCPU is fully onlined, i.e. it won't get the request made to
"all" vCPUs.  If APICv is globally inhibited between setting apicv_active
and onlining the vCPU, the vCPU will end up running with APICv enabled
and trigger KVM's sanity check.

Mark APICv as active during vCPU creation if APICv is enabled at the
module level, both to be optimistic about it's final state, e.g. to avoid
additional VMWRITEs on VMX, and because there are likely bugs lurking
since KVM checks apicv_active in multiple vCPU creation paths.  While
keeping the current behavior of consuming kvm_apicv_activated() is
arguably safer from a regression perspective, force apicv_active so that
vCPU creation runs with deterministic state and so that if there are bugs,
they are found sooner than later, i.e. not when some crazy race condition
is hit.

  WARNING: CPU: 0 PID: 484 at arch/x86/kvm/x86.c:9877 vcpu_enter_guest+0x2ae3/0x3ee0 arch/x86/kvm/x86.c:9877
  Modules linked in:
  CPU: 0 PID: 484 Comm: syz-executor361 Not tainted 5.16.13 #2
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1~cloud0 04/01/2014
  RIP: 0010:vcpu_enter_guest+0x2ae3/0x3ee0 arch/x86/kvm/x86.c:9877
  Call Trace:
   <TASK>
   vcpu_run arch/x86/kvm/x86.c:10039 [inline]
   kvm_arch_vcpu_ioctl_run+0x337/0x15e0 arch/x86/kvm/x86.c:10234
   kvm_vcpu_ioctl+0x4d2/0xc80 arch/x86/kvm/../../../virt/kvm/kvm_main.c:3727
   vfs_ioctl fs/ioctl.c:51 [inline]
   __do_sys_ioctl fs/ioctl.c:874 [inline]
   __se_sys_ioctl fs/ioctl.c:860 [inline]
   __x64_sys_ioctl+0x16d/0x1d0 fs/ioctl.c:860
   do_syscall_x64 arch/x86/entry/common.c:50 [inline]
   do_syscall_64+0x38/0x90 arch/x86/entry/common.c:80
   entry_SYSCALL_64_after_hwframe+0x44/0xae

The bug was hit by a syzkaller spamming VM creation with 2 vCPUs and a
call to KVM_SET_GUEST_DEBUG.

  r0 = openat$kvm(0xffffffffffffff9c, &(0x7f0000000000), 0x0, 0x0)
  r1 = ioctl$KVM_CREATE_VM(r0, 0xae01, 0x0)
  ioctl$KVM_CAP_SPLIT_IRQCHIP(r1, 0x4068aea3, &(0x7f0000000000)) (async)
  r2 = ioctl$KVM_CREATE_VCPU(r1, 0xae41, 0x0) (async)
  r3 = ioctl$KVM_CREATE_VCPU(r1, 0xae41, 0x400000000000002)
  ioctl$KVM_SET_GUEST_DEBUG(r3, 0x4048ae9b, &(0x7f00000000c0)={0x5dda9c14aa95f5c5})
  ioctl$KVM_RUN(r2, 0xae80, 0x0)

Reported-by: Gaoning Pan <pgn@zju.edu.cn>
Reported-by: Yongkang Jia <kangel@zju.edu.cn>
Fixes: 8df14af42f00 ("kvm: x86: Add support for dynamic APICv activation")
Cc: stable@vger.kernel.org
Cc: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20220420013732.3308816-4-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: x86: Don't re-acquire SRCU lock in complete_emulated_io()

commit 2d08935682ac5f6bfb70f7e6844ec27d4a245fa4 upstream.

Don't re-acquire SRCU in complete_emulated_io() now that KVM acquires the
lock in kvm_arch_vcpu_ioctl_run(). More importantly, don't overwrite
vcpu->srcu_idx. If the index acquired by complete_emulated_io() differs
from the one acquired by kvm_arch_vcpu_ioctl_run(), KVM will effectively
leak a lock and hang if/when synchronize_srcu() is invoked for the
relevant grace period.

Fixes: 8d25b7beca7e ("KVM: x86: pull kvm->srcu read-side to kvm_arch_vcpu_ioctl_run")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20220415004343.2203171-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: x86/pmu: Update AMD PMC sample period to fix guest NMI-watchdog

commit 75189d1de1b377e580ebd2d2c55914631eac9c64 upstream.

NMI-watchdog is one of the favorite features of kernel developers,
but it does not work in AMD guest even with vPMU enabled and worse,
the system misrepresents this capability via /proc.

This is a PMC emulation error. KVM does not pass the latest valid
value to perf_event in time when guest NMI-watchdog is running, thus
the perf_event corresponding to the watchdog counter will enter the
old state at some point after the first guest NMI injection, forcing
the hardware register PMC0 to be constantly written to 0x800000000001.

Meanwhile, the running counter should accurately reflect its new value
based on the latest coordinated pmc->counter (from vPMC's point of view)
rather than the value written directly by the guest.

Fixes: 168d918f2643 ("KVM: x86: Adjust counter sample period after a wrmsr")
Reported-by: Dongli Cao <caodongli@kingsoft.com>
Signed-off-by: Like Xu <likexu@tencent.com>
Reviewed-by: Yanan Wang <wangyanan55@huawei.com>
Tested-by: Yanan Wang <wangyanan55@huawei.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Message-Id: <20220409015226.38619-1-likexu@tencent.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm_pmu: Validate single/group leader events

commit e5c23779f93d45e39a52758ca593bd7e62e9b4be upstream.

In the case where there is only a cycle counter available (i.e.
PMCR_EL0.N is 0) and an event other than CPU cycles is opened, the open
should fail as the event can never possibly be scheduled. However, the
event validation when an event is opened is skipped when the group
leader is opened. Fix this by always validating the group leader events.

Reported-by: Al Grant <al.grant@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20220408203330.4014015-1-robh@kernel.org
Cc: <stable@vger.kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/vmwgfx: Fix gem refcounting and memory evictions

commit 298799a28264ce400d9ff95c51b7adcb123d866e upstream.

v2: Add the last part of the ref count fix which was spotted by
Philipp Sieweck where the ref count of cpu writers is off due to
ERESTARTSYS or EBUSY during bo waits.

The initial GEM port broke refcounting on shareable (prime) surfaces and
memory evictions. The prime surfaces broke because the parent surfaces
weren't increasing the ref count on GEM surfaces, which meant that
the memory backing textures could have been deleted while the texture
was still accessible. The evictions broke due to a typo, the code was
supposed to exit if the passed buffers were not vmw_buffer_object
not if they were. They're tied because the evictions depend on having
memory to actually evict.

This fixes crashes with XA state tracker which is used for xrender
acceleration on xf86-video-vmware, apps/tests which use a lot of
memory (a good test being the piglit's streaming-texture-leak) and
desktops.

Signed-off-by: Zack Rusin <zackr@vmware.com>
Fixes: 8afa13a0583f ("drm/vmwgfx: Implement DRIVER_GEM")
Reported-by: Philipp Sieweck <psi@informatik.uni-kiel.de>
Cc: <stable@vger.kernel.org> # v5.17+
Reviewed-by: Maaz Mombasawala <mombasawalam@vmware.com>
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220420040328.1007409-1-zack@kde.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARC: entry: fix syscall_trace_exit argument

commit b1c6ecfdd06907554518ec384ce8e99889d15193 upstream.

Function syscall_trace_exit expects pointer to pt_regs. However
r0 is also used to keep syscall return value. Restore pointer
to pt_regs before calling syscall_trace_exit.

Cc: <stable@vger.kernel.org>
Signed-off-by: Sergey Matyukevich <sergey.matyukevich@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

codecs: rt5682s: fix an incorrect NULL check on list iterator

commit acc72863e0f11cd0bedc888b663700229f9ba5ff upstream.

The bug is here:
if (!dai) {

The list iterator value 'dai' will *always* be set and non-NULL
by for_each_component_dais(), so it is incorrect to assume that
the iterator value will be NULL if the list is empty or no element
is found (In fact, it will be a bogus pointer to an invalid struct
object containing the HEAD). Otherwise it will bypass the check
'if (!dai) {' (never call dev_err() and never return -ENODEV;)
and lead to invalid memory access lately when calling
'rt5682s_set_bclk1_ratio(dai, factor);'.

To fix the bug, just return rt5682s_set_bclk1_ratio(dai, factor);
when found the 'dai', otherwise dev_err() and return -ENODEV;

Cc: stable@vger.kernel.org
Fixes: bdd229ab26be9 ("ASoC: rt5682s: Add driver for ALC5682I-VS codec")
Signed-off-by: Xiaomeng Tong <xiam0nd.tong@gmail.com>
Link: https://lore.kernel.org/r/20220327081300.12962-1-xiam0nd.tong@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

e1000e: Fix possible overflow in LTR decoding

commit 04ebaa1cfddae5f240cc7404f009133bb0389a47 upstream.

When we decode the latency and the max_latency, u16 value may not fit
the required size and could lead to the wrong LTR representation.

Scaling is represented as:
scale 0 - 1         (2^(5*0)) = 2^0
scale 1 - 32        (2^(5 *1))= 2^5
scale 2 - 1024      (2^(5 *2)) =2^10
scale 3 - 32768     (2^(5 *3)) =2^15
scale 4 - 1048576   (2^(5 *4)) = 2^20
scale 5 - 33554432  (2^(5 *4)) = 2^25
scale 4 and scale 5 required 20 and 25 bits respectively.
scale 6 reserved.

Replace the u16 type with the u32 type and allow corrected LTR
representation.

Cc: stable@vger.kernel.org
Fixes: 44a13a5d99c7 ("e1000e: Fix the max snoop/no-snoop latency for 10M")
Reported-by: James Hutchinson <jahutchinson99@googlemail.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215689
Suggested-by: Dima Ruinskiy <dima.ruinskiy@intel.com>
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Tested-by: James Hutchinson <jahutchinson99@googlemail.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: soc-dapm: fix two incorrect uses of list iterator

commit f730a46b931d894816af34a0ff8e4ad51565b39f upstream.

These two bug are here:
list_for_each_entry_safe_continue(w, n, list,
power_list);
list_for_each_entry_safe_continue(w, n, list,
power_list);

After the list_for_each_entry_safe_continue() exits, the list iterator
will always be a bogus pointer which point to an invalid struct objdect
containing HEAD member. The funciton poniter 'w->event' will be a
invalid value which can lead to a control-flow hijack if the 'w' can be
controlled.

The original intention was to continue the outer list_for_each_entry_safe()
loop with the same entry if w->event is NULL, but misunderstanding the
meaning of list_for_each_entry_safe_continue().

So just add a 'continue;' to fix the bug.

Cc: stable@vger.kernel.org
Fixes: 163cac061c973 ("ASoC: Factor out DAPM sequence execution")
Signed-off-by: Xiaomeng Tong <xiam0nd.tong@gmail.com>
Link: https://lore.kernel.org/r/20220329012134.9375-1-xiam0nd.tong@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: rt5682: fix an incorrect NULL check on list iterator

commit c8618d65007ba68d7891130642d73e89372101e8 upstream.

The bug is here:
if (!dai) {

The list iterator value 'dai' will *always* be set and non-NULL
by for_each_component_dais(), so it is incorrect to assume that
the iterator value will be NULL if the list is empty or no element
is found (In fact, it will be a bogus pointer to an invalid struct
object containing the HEAD). Otherwise it will bypass the check
'if (!dai) {' (never call dev_err() and never return -ENODEV;)
and lead to invalid memory access lately when calling
'rt5682_set_bclk1_ratio(dai, factor);'.

To fix the bug, just return rt5682_set_bclk1_ratio(dai, factor);
when found the 'dai', otherwise dev_err() and return -ENODEV;

Cc: stable@vger.kernel.org
Fixes: ebbfabc16d23d ("ASoC: rt5682: Add CCF usage for providing I2S clks")
Signed-off-by: Xiaomeng Tong <xiam0nd.tong@gmail.com>
Link: https://lore.kernel.org/r/20220327081002.12684-1-xiam0nd.tong@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

gpio: Request interrupts after IRQ is initialized

commit 06fb4ecfeac7e00d6704fa5ed19299f2fefb3cc9 upstream.

Commit 5467801f1fcb ("gpio: Restrict usage of GPIO chip irq members
before initialization") attempted to fix a race condition that lead to a
NULL pointer, but in the process caused a regression for _AEI/_EVT
declared GPIOs.

This manifests in messages showing deferred probing while trying to
allocate IRQs like so:

  amd_gpio AMDI0030:00: Failed to translate GPIO pin 0x0000 to IRQ, err -517
  amd_gpio AMDI0030:00: Failed to translate GPIO pin 0x002C to IRQ, err -517
  amd_gpio AMDI0030:00: Failed to translate GPIO pin 0x003D to IRQ, err -517
  [ .. more of the same .. ]

The code for walking _AEI doesn't handle deferred probing and so this
leads to non-functional GPIO interrupts.

Fix this issue by moving the call to `acpi_gpiochip_request_interrupts`
to occur after gc->irc.initialized is set.

Fixes: 5467801f1fcb ("gpio: Restrict usage of GPIO chip irq members before initialization")
Link: https://lore.kernel.org/linux-gpio/BL1PR12MB51577A77F000A008AA694675E2EF9@BL1PR12MB5157.namprd12.prod.outlook.com/
Link: https://bugzilla.suse.com/show_bug.cgi?id=1198697
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215850
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/1979
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/1976
Reported-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Shreeya Patel <shreeya.patel@collabora.com>
Tested-By: Samuel Čavoj <samuel@cavoj.net>
Tested-By: lukeluk498@gmail.com Link:
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-and-tested-by: Takashi Iwai <tiwai@suse.de>
Cc: Shreeya Patel <shreeya.patel@collabora.com>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

openvswitch: fix OOB access in reserve_sfa_size()

commit cefa91b2332d7009bc0be5d951d6cbbf349f90f8 upstream.

Given a sufficiently large number of actions, while copying and
reserving memory for a new action of a new flow, if next_offset is
greater than MAX_ACTIONS_BUFSIZE, the function reserve_sfa_size() does
not return -EMSGSIZE as expected, but it allocates MAX_ACTIONS_BUFSIZE
bytes increasing actions_len by req_size. This can then lead to an OOB
write access, especially when further actions need to be copied.

Fix it by rearranging the flow action size check.

KASAN splat below:

==================================================================
BUG: KASAN: slab-out-of-bounds in reserve_sfa_size+0x1ba/0x380 [openvswitch]
Write of size 65360 at addr ffff888147e4001c by task handler15/836

CPU: 1 PID: 836 Comm: handler15 Not tainted 5.18.0-rc1+ #27
...
Call Trace:
<TASK>
dump_stack_lvl+0x45/0x5a
print_report.cold+0x5e/0x5db
? __lock_text_start+0x8/0x8
? reserve_sfa_size+0x1ba/0x380 [openvswitch]
kasan_report+0xb5/0x130
? reserve_sfa_size+0x1ba/0x380 [openvswitch]
kasan_check_range+0xf5/0x1d0
memcpy+0x39/0x60
reserve_sfa_size+0x1ba/0x380 [openvswitch]
__add_action+0x24/0x120 [openvswitch]
ovs_nla_add_action+0xe/0x20 [openvswitch]
ovs_ct_copy_action+0x29d/0x1130 [openvswitch]
? __kernel_text_address+0xe/0x30
? unwind_get_return_address+0x56/0xa0
? create_prof_cpu_mask+0x20/0x20
? ovs_ct_verify+0xf0/0xf0 [openvswitch]
? prep_compound_page+0x198/0x2a0
? __kasan_check_byte+0x10/0x40
? kasan_unpoison+0x40/0x70
? ksize+0x44/0x60
? reserve_sfa_size+0x75/0x380 [openvswitch]
__ovs_nla_copy_actions+0xc26/0x2070 [openvswitch]
? __zone_watermark_ok+0x420/0x420
? validate_set.constprop.0+0xc90/0xc90 [openvswitch]
? __alloc_pages+0x1a9/0x3e0
? __alloc_pages_slowpath.constprop.0+0x1da0/0x1da0
? unwind_next_frame+0x991/0x1e40
? __mod_node_page_state+0x99/0x120
? __mod_lruvec_page_state+0x2e3/0x470
? __kasan_kmalloc_large+0x90/0xe0
ovs_nla_copy_actions+0x1b4/0x2c0 [openvswitch]
ovs_flow_cmd_new+0x3cd/0xb10 [openvswitch]
...

Cc: stable@vger.kernel.org
Fixes: f28cd2af22a0 ("openvswitch: fix flow actions reallocation")
Signed-off-by: Paolo Valerio <pvalerio@redhat.com>
Acked-by: Eelco Chaudron <echaudro@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xtensa: fix a7 clobbering in coprocessor context load/store

commit 839769c35477d4acc2369e45000ca7b0b6af39a7 upstream.

Fast coprocessor exception handler saves a3..a6, but coprocessor context
load/store code uses a4..a7 as temporaries, potentially clobbering a7.
'Potentially' because coprocessor state load/store macros may not use
all four temporary registers (and neither FPU nor HiFi macros do).
Use a3..a6 as intended.

Cc: stable@vger.kernel.org
Fixes: c658eac628aa ("[XTENSA] Add support for configurable registers and coprocessors")
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xtensa: patch_text: Fixup last cpu should be master

commit ee69d4be8fd064cd08270b4808d2dfece3614ee0 upstream.

These patch_text implementations are using stop_machine_cpuslocked
infrastructure with atomic cpu_count. The original idea: When the
master CPU patch_text, the others should wait for it. But current
implementation is using the first CPU as master, which couldn't
guarantee the remaining CPUs are waiting. This patch changes the
last CPU as the master to solve the potential risk.

Fixes: 64711f9a47d4 ("xtensa: implement jump_label support")
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Signed-off-by: Guo Ren <guoren@kernel.org>
Reviewed-by: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: <stable@vger.kernel.org>
Message-Id: <20220407073323.743224-4-guoren@kernel.org>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cifs: use correct lock type in cifs_reconnect()

commit cd70a3e8988a999c42d307d2616a5e7b6a33c7c8 upstream.

TCP_Server_Info::origin_fullpath and TCP_Server_Info::leaf_fullpath
are protected by refpath_lock mutex and not cifs_tcp_ses_lock
spinlock.

Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Cc: stable@vger.kernel.org
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cifs: fix NULL ptr dereference in refresh_mounts()

commit 41f10081a92a0ed280008218a8ec18ad8ba0fceb upstream.

Either mount(2) or automount might not have server->origin_fullpath
set yet while refresh_cache_worker() is attempting to refresh DFS
referrals.  Add missing NULL check and locking around it.

This fixes bellow crash:

[ 1070.276835] general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN NOPTI
[ 1070.277676] KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
[ 1070.278219] CPU: 1 PID: 8506 Comm: kworker/u8:1 Not tainted 5.18.0-rc3 #10
[ 1070.278701] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.15.0-0-g2dd4b9b-rebuilt.opensuse.org 04/01/2014
[ 1070.279495] Workqueue: cifs-dfscache refresh_cache_worker [cifs]
[ 1070.280044] RIP: 0010:strcasecmp+0x34/0x150
[ 1070.280359] Code: 00 00 00 fc ff df 41 54 55 48 89 fd 53 48 83 ec 10 eb 03 4c 89 fe 48 89 ef 48 83 c5 01 48 89 f8 48 89 fa 48 c1 e8 03 83 e2 07 <42> 0f b6 04 28 38 d0 7f 08 84 c0 0f 85 bc 00 00 00 0f b6 45 ff 44
[ 1070.281729] RSP: 0018:ffffc90008367958 EFLAGS: 00010246
[ 1070.282114] RAX: 0000000000000000 RBX: dffffc0000000000 RCX: 0000000000000000
[ 1070.282691] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
[ 1070.283273] RBP: 0000000000000001 R08: 0000000000000000 R09: ffffffff873eda27
[ 1070.283857] R10: ffffc900083679a0 R11: 0000000000000001 R12: ffff88812624c000
[ 1070.284436] R13: dffffc0000000000 R14: ffff88810e6e9a88 R15: ffff888119bb9000
[ 1070.284990] FS:  0000000000000000(0000) GS:ffff888151200000(0000) knlGS:0000000000000000
[ 1070.285625] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1070.286100] CR2: 0000561a4d922418 CR3: 000000010aecc000 CR4: 0000000000350ee0
[ 1070.286683] Call Trace:
[ 1070.286890]  <TASK>
[ 1070.287070]  refresh_cache_worker+0x895/0xd20 [cifs]
[ 1070.287475]  ? __refresh_tcon.isra.0+0xfb0/0xfb0 [cifs]
[ 1070.287905]  ? __lock_acquire+0xcd1/0x6960
[ 1070.288247]  ? is_dynamic_key+0x1a0/0x1a0
[ 1070.288591]  ? lockdep_hardirqs_on_prepare+0x410/0x410
[ 1070.289012]  ? lock_downgrade+0x6f0/0x6f0
[ 1070.289318]  process_one_work+0x7bd/0x12d0
[ 1070.289637]  ? worker_thread+0x160/0xec0
[ 1070.289970]  ? pwq_dec_nr_in_flight+0x230/0x230
[ 1070.290318]  ? _raw_spin_lock_irq+0x5e/0x90
[ 1070.290619]  worker_thread+0x5ac/0xec0
[ 1070.290891]  ? process_one_work+0x12d0/0x12d0
[ 1070.291199]  kthread+0x2a5/0x350
[ 1070.291430]  ? kthread_complete_and_exit+0x20/0x20
[ 1070.291770]  ret_from_fork+0x22/0x30
[ 1070.292050]  </TASK>
[ 1070.292223] Modules linked in: bpfilter cifs cifs_arc4 cifs_md4
[ 1070.292765] ---[ end trace 0000000000000000 ]---
[ 1070.293108] RIP: 0010:strcasecmp+0x34/0x150
[ 1070.293471] Code: 00 00 00 fc ff df 41 54 55 48 89 fd 53 48 83 ec 10 eb 03 4c 89 fe 48 89 ef 48 83 c5 01 48 89 f8 48 89 fa 48 c1 e8 03 83 e2 07 <42> 0f b6 04 28 38 d0 7f 08 84 c0 0f 85 bc 00 00 00 0f b6 45 ff 44
[ 1070.297718] RSP: 0018:ffffc90008367958 EFLAGS: 00010246
[ 1070.298622] RAX: 0000000000000000 RBX: dffffc0000000000 RCX: 0000000000000000
[ 1070.299428] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
[ 1070.300296] RBP: 0000000000000001 R08: 0000000000000000 R09: ffffffff873eda27
[ 1070.301204] R10: ffffc900083679a0 R11: 0000000000000001 R12: ffff88812624c000
[ 1070.301932] R13: dffffc0000000000 R14: ffff88810e6e9a88 R15: ffff888119bb9000
[ 1070.302645] FS:  0000000000000000(0000) GS:ffff888151200000(0000) knlGS:0000000000000000
[ 1070.303462] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1070.304131] CR2: 0000561a4d922418 CR3: 000000010aecc000 CR4: 0000000000350ee0
[ 1070.305004] Kernel panic - not syncing: Fatal exception
[ 1070.305711] Kernel Offset: disabled
[ 1070.305971] ---[ end Kernel panic - not syncing: Fatal exception ]---

Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Cc: stable@vger.kernel.org
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fs: fix acl translation

commit 705191b03d507744c7e097f78d583621c14988ac upstream.

Last cycle we extended the idmapped mounts infrastructure to support
idmapped mounts of idmapped filesystems (No such filesystem yet exist.).
Since then, the meaning of an idmapped mount is a mount whose idmapping
is different from the filesystems idmapping.

While doing that work we missed to adapt the acl translation helpers.
They still assume that checking for the identity mapping is enough.  But
they need to use the no_idmapping() helper instead.

Note, POSIX ACLs are always translated right at the userspace-kernel
boundary using the caller's current idmapping and the initial idmapping.
The order depends on whether we're coming from or going to userspace.
The filesystem's idmapping doesn't matter at the border.

Consequently, if a non-idmapped mount is passed we need to make sure to
always pass the initial idmapping as the mount's idmapping and not the
filesystem idmapping.  Since it's irrelevant here it would yield invalid
ids and prevent setting acls for filesystems that are mountable in a
userns and support posix acls (tmpfs and fuse).

I verified the regression reported in [1] and verified that this patch
fixes it.  A regression test will be added to xfstests in parallel.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=215849
Fixes: bd303368b776 ("fs: support mapped mounts of mapped filesystems")
Cc: Seth Forshee <sforshee@digitalocean.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: <stable@vger.kernel.org> # 5.17
Cc: <regressions@lists.linux.dev>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf report: Set PERF_SAMPLE_DATA_SRC bit for Arm SPE event

[ Upstream commit ccb17caecfbd542f49a2a79ae088136ba8bfb794 ]

Since commit bb30acae4c4dacfa ("perf report: Bail out --mem-mode if mem
info is not available") "perf mem report" and "perf report --mem-mode"
don't report result if the PERF_SAMPLE_DATA_SRC bit is missed in sample
type.

The commit ffab487052054162 ("perf: arm-spe: Fix perf report
--mem-mode") partially fixes the issue. It adds PERF_SAMPLE_DATA_SRC
bit for Arm SPE event, this allows the perf data file generated by
kernel v5.18-rc1 or later version can be reported properly.

On the other hand, perf tool still fails to be backward compatibility
for a data file recorded by an older version's perf which contains Arm
SPE trace data. This patch is a workaround in reporting phase, when
detects ARM SPE PMU event and without PERF_SAMPLE_DATA_SRC bit, it will
force to set the bit in the sample type and give a warning info.

Fixes: bb30acae4c4dacfa ("perf report: Bail out --mem-mode if mem info is not available")
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Tested-by: German Gomez <german.gomez@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Link: https://lore.kernel.org/r/20220414123201.842754-1-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf script: Always allow field 'data_src' for auxtrace

[ Upstream commit c6d8df01064333dcf140eda996abdb60a60e24b3 ]

If use command 'perf script -F,+data_src' to dump memory samples with
Arm SPE trace data, it reports error:

# perf script -F,+data_src
Samples for 'dummy:u' event do not have DATA_SRC attribute set. Cannot print 'data_src' field.

This is because the 'dummy:u' event is absent DATA_SRC bit in its sample
type, so if a file contains AUX area tracing data then always allow
field 'data_src' to be selected as an option for perf script.

Fixes: e55ed3423c1bb29f ("perf arm-spe: Synthesize memory event")
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220417114837.839896-1-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>