Yangtao Li [Tue, 20 Nov 2018 13:30:40 +0000 (08:30 -0500)]
sbus: char: add of_node_put()
[ Upstream commit
87d81a23e24f24ebe014891e8bdf3ff8785031e8 ]
use of_node_put() to release the refcount.
Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Trond Myklebust [Sun, 2 Dec 2018 04:18:00 +0000 (23:18 -0500)]
SUNRPC: Fix a potential race in xprt_connect()
[ Upstream commit
0a9a4304f3614e25d9de9b63502ca633c01c0d70 ]
If an asynchronous connection attempt completes while another task is
in xprt_connect(), then the call to rpc_sleep_on() could end up
racing with the call to xprt_wake_pending_tasks().
So add a second test of the connection state after we've put the
task to sleep and set the XPRT_CONNECTING flag, when we know that there
can be no asynchronous connection attempts still in progress.
Fixes: 0b9e79431377d ("SUNRPC: Move the test for XPRT_CONNECTING into...")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Toni Peltonen [Tue, 27 Nov 2018 14:56:57 +0000 (16:56 +0200)]
bonding: fix 802.3ad state sent to partner when unbinding slave
[ Upstream commit
3b5b3a3331d141e8f2a7aaae3a94dfa1e61ecbe4 ]
Previously when unbinding a slave the 802.3ad implementation only told
partner that the port is not suitable for aggregation by setting the port
aggregation state from aggregatable to individual. This is not enough. If the
physical layer still stays up and we only unbinded this port from the bond there
is nothing in the aggregation status alone to prevent the partner from sending
traffic towards us. To ensure that the partner doesn't consider this
port at all anymore we should also disable collecting and distributing to
signal that this actor is going away. Also clear AD_STATE_SYNCHRONIZATION to
ensure partner exits collecting + distributing state.
I have tested this behaviour againts Arista EOS switches with mlx5 cards
(physical link stays up even when interface is down) and simulated
the same situation virtually Linux <-> Linux with two network namespaces
running two veth device pairs. In both cases setting aggregation to
individual doesn't alone prevent traffic from being to sent towards this
port given that the link stays up in partners end. Partner still keeps
it's end in collecting + distributing state and continues until timeout is
reached. In most cases this means we are losing the traffic partner sends
towards our port while we wait for timeout. This is most visible with slow
periodic time (LACP rate slow).
Other open source implementations like Open VSwitch and libreswitch, and
vendor implementations like Arista EOS, seem to disable collecting +
distributing to when doing similar port disabling/detaching/removing change.
With this patch kernel implementation would behave the same way and ensure
partner doesn't consider our actor viable anymore.
Signed-off-by: Toni Peltonen <peltzi@peltzi.fi>
Signed-off-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Acked-by: Jonathan Toppins <jtoppins@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jose Abreu [Fri, 30 Nov 2018 09:47:31 +0000 (09:47 +0000)]
ARC: io.h: Implement reads{x}()/writes{x}()
[ Upstream commit
10d443431dc2bb733cf7add99b453e3fb9047a2e ]
Some ARC CPU's do not support unaligned loads/stores. Currently, generic
implementation of reads{b/w/l}()/writes{b/w/l}() is being used with ARC.
This can lead to misfunction of some drivers as generic functions do a
plain dereference of a pointer that can be unaligned.
Let's use {get/put}_unaligned() helpers instead of plain dereference of
pointer in order to fix. The helpers allow to get and store data from an
unaligned address whilst preserving the CPU internal alignment.
According to [1], the use of these helpers are costly in terms of
performance so we added an initial check for a buffer already aligned so
that the usage of the helpers can be avoided, when possible.
[1] Documentation/unaligned-memory-access.txt
Cc: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: David Laight <David.Laight@ACULAB.COM>
Tested-by: Vitor Soares <soares@synopsys.com>
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sean Paul [Wed, 3 Oct 2018 20:22:31 +0000 (16:22 -0400)]
drm/msm: Grab a vblank reference when waiting for commit_done
[ Upstream commit
3b712e43e3876b42b38321ecf790a1f5fe59c834 ]
Similar to the atomic helpers, we should enable vblank while we're
waiting for the commit to finish. DPU needs this, MDP5 seems to work
fine without it.
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
YiFei Zhu [Thu, 29 Nov 2018 17:12:30 +0000 (18:12 +0100)]
x86/earlyprintk/efi: Fix infinite loop on some screen widths
[ Upstream commit
79c2206d369b87b19ac29cb47601059b6bf5c291 ]
An affected screen resolution is 1366 x 768, which width is not
divisible by 8, the default font width. On such screens, when longer
lines are earlyprintk'ed, overflow-to-next-line can never trigger,
due to the left-most x-coordinate of the next character always less
than the screen width. Earlyprintk will infinite loop in trying to
print the rest of the string but unable to, due to the line being
full.
This patch makes the trigger consider the right-most x-coordinate,
instead of left-most, as the value to compare against the screen
width threshold.
Signed-off-by: YiFei Zhu <zhuyifei1999@gmail.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arend van Spriel <arend.vanspriel@broadcom.com>
Cc: Bhupesh Sharma <bhsharma@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Eric Snowberg <eric.snowberg@oracle.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Joe Perches <joe@perches.com>
Cc: Jon Hunter <jonathanh@nvidia.com>
Cc: Julien Thierry <julien.thierry@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Nathan Chancellor <natechancellor@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com>
Cc: Sedat Dilek <sedat.dilek@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/20181129171230.18699-12-ard.biesheuvel@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Cathy Avery [Tue, 27 Nov 2018 19:28:53 +0000 (14:28 -0500)]
scsi: vmw_pscsi: Rearrange code to avoid multiple calls to free_irq during unload
[ Upstream commit
02f425f811cefcc4d325d7a72272651e622dc97e ]
Currently pvscsi_remove calls free_irq more than once as
pvscsi_release_resources and __pvscsi_shutdown both call
pvscsi_shutdown_intr. This results in a 'Trying to free already-free IRQ'
warning and stack trace. To solve the problem pvscsi_shutdown_intr has been
moved out of pvscsi_release_resources.
Signed-off-by: Cathy Avery <cavery@redhat.com>
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Fred Herard [Wed, 21 Nov 2018 01:22:45 +0000 (20:22 -0500)]
scsi: libiscsi: Fix NULL pointer dereference in iscsi_eh_session_reset
[ Upstream commit
5db6dd14b31397e8cccaaddab2ff44ebec1acf25 ]
This commit addresses NULL pointer dereference in iscsi_eh_session_reset.
Reference should not be made to session->leadconn when session->state is
set to ISCSI_STATE_TERMINATE.
Signed-off-by: Fred Herard <fred.herard@oracle.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Alexey Khoroshilov [Fri, 5 Oct 2018 20:22:06 +0000 (23:22 +0300)]
mac80211_hwsim: fix module init error paths for netlink
[ Upstream commit
05cc09de4c017663a217630682041066f2f9a5cd ]
There is no unregister netlink notifier and family on error paths
in init_mac80211_hwsim(). Also there is an error path where
hwsim_class is not destroyed.
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Fixes: 62759361eb49 ("mac80211-hwsim: Provide multicast event for HWSIM_CMD_NEW_RADIO")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ilan Peer [Tue, 3 Apr 2018 08:35:22 +0000 (11:35 +0300)]
mac80211: Fix condition validating WMM IE
[ Upstream commit
911a26484c33e10de6237228ca1d7293548e9f49 ]
Commit
c470bdc1aaf3 ("mac80211: don't WARN on bad WMM parameters from
buggy APs") handled cases where an AP reports a zeroed WMM
IE. However, the condition that checks the validity accessed the wrong
index in the ieee80211_tx_queue_params array, thus wrongly deducing
that the parameters are invalid. Fix it.
Fixes: c470bdc1aaf3 ("mac80211: don't WARN on bad WMM parameters from buggy APs")
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Emmanuel Grumbach [Mon, 26 Mar 2018 13:21:04 +0000 (16:21 +0300)]
mac80211: don't WARN on bad WMM parameters from buggy APs
[ Upstream commit
c470bdc1aaf36669e04ba65faf1092b2d1c6cabe ]
Apparently, some APs are buggy enough to send a zeroed
WMM IE. Don't WARN on this since this is not caused by a bug
on the client's system.
This aligns the condition of the WARNING in drv_conf_tx
with the validity check in ieee80211_sta_wmm_params.
We will now pick the default values whenever we get
a zeroed WMM IE.
This has been reported here:
https://bugzilla.kernel.org/show_bug.cgi?id=199161
Fixes: f409079bb678 ("mac80211: sanity check CW_min/CW_max towards driver")
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yunlei He [Thu, 1 Jun 2017 08:43:51 +0000 (16:43 +0800)]
f2fs: fix a panic caused by NULL flush_cmd_control
commit
d4fdf8ba0e5808ba9ad6b44337783bd9935e0982 upstream.
Mount fs with option noflush_merge, boot failed for illegal address
fcc in function f2fs_issue_flush:
if (!test_opt(sbi, FLUSH_MERGE)) {
ret = submit_flush_wait(sbi);
atomic_inc(&fcc->issued_flush); -> Here, fcc illegal
return ret;
}
Signed-off-by: Yunlei He <heyunlei@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
[bwh: Backported to 4.9: adjust context]
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Brian Norris [Wed, 5 Dec 2018 18:16:57 +0000 (10:16 -0800)]
Revert "drm/rockchip: Allow driver to be shutdown on reboot/kexec"
commit
63238173b2faf3d6b85a416f1c69af6c7be2413f upstream.
This reverts commit
7f3ef5dedb146e3d5063b6845781ad1bb59b92b5.
It causes new warnings [1] on shutdown when running the Google Kevin or
Scarlet (RK3399) boards under Chrome OS. Presumably our usage of DRM is
different than what Marc and Heiko test.
We're looking at a different approach (e.g., [2]) to replace this, but
IMO the revert should be taken first, as it already propagated to
-stable.
[1] Report here:
http://lkml.kernel.org/lkml/
20181205030127.GA200921@google.com
WARNING: CPU: 4 PID: 2035 at drivers/gpu/drm/drm_mode_config.c:477 drm_mode_config_cleanup+0x1c4/0x294
...
Call trace:
drm_mode_config_cleanup+0x1c4/0x294
rockchip_drm_unbind+0x4c/0x8c
component_master_del+0x88/0xb8
rockchip_drm_platform_remove+0x2c/0x44
rockchip_drm_platform_shutdown+0x20/0x2c
platform_drv_shutdown+0x2c/0x38
device_shutdown+0x164/0x1b8
kernel_restart_prepare+0x40/0x48
kernel_restart+0x20/0x68
...
Memory manager not clean during takedown.
WARNING: CPU: 4 PID: 2035 at drivers/gpu/drm/drm_mm.c:950 drm_mm_takedown+0x34/0x44
...
drm_mm_takedown+0x34/0x44
rockchip_drm_unbind+0x64/0x8c
component_master_del+0x88/0xb8
rockchip_drm_platform_remove+0x2c/0x44
rockchip_drm_platform_shutdown+0x20/0x2c
platform_drv_shutdown+0x2c/0x38
device_shutdown+0x164/0x1b8
kernel_restart_prepare+0x40/0x48
kernel_restart+0x20/0x68
...
[2] https://patchwork.kernel.org/patch/
10556151/
https://www.spinics.net/lists/linux-rockchip/msg21342.html
[PATCH] drm/rockchip: shutdown drm subsystem on shutdown
Fixes: 7f3ef5dedb14 ("drm/rockchip: Allow driver to be shutdown on reboot/kexec")
Cc: Jeffy Chen <jeffy.chen@rock-chips.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Vicente Bergas <vicencb@gmail.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: stable@vger.kernel.org
Signed-off-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20181205181657.177703-1-briannorris@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Radu Rendec [Wed, 28 Nov 2018 03:20:48 +0000 (22:20 -0500)]
powerpc/msi: Fix NULL pointer access in teardown code
commit
78e7b15e17ac175e7eed9e21c6f92d03d3b0a6fa upstream.
The arch_teardown_msi_irqs() function assumes that controller ops
pointers were already checked in arch_setup_msi_irqs(), but this
assumption is wrong: arch_teardown_msi_irqs() can be called even when
arch_setup_msi_irqs() returns an error (-ENOSYS).
This can happen in the following scenario:
- msi_capability_init() calls pci_msi_setup_msi_irqs()
- pci_msi_setup_msi_irqs() returns -ENOSYS
- msi_capability_init() notices the error and calls free_msi_irqs()
- free_msi_irqs() calls pci_msi_teardown_msi_irqs()
This is easier to see when CONFIG_PCI_MSI_IRQ_DOMAIN is not set and
pci_msi_setup_msi_irqs() and pci_msi_teardown_msi_irqs() are just
aliases to arch_setup_msi_irqs() and arch_teardown_msi_irqs().
The call to free_msi_irqs() upon pci_msi_setup_msi_irqs() failure
seems legit, as it does additional cleanup; e.g.
list_del(&entry->list) and kfree(entry) inside free_msi_irqs() do
happen (MSI descriptors are allocated before pci_msi_setup_msi_irqs()
is called and need to be cleaned up if that fails).
Fixes: 6b2fd7efeb88 ("PCI/MSI/PPC: Remove arch_msi_check_device()")
Cc: stable@vger.kernel.org # v3.18+
Signed-off-by: Radu Rendec <radu.rendec@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Steven Rostedt (VMware) [Tue, 11 Dec 2018 04:58:01 +0000 (23:58 -0500)]
tracing: Fix memory leak of instance function hash filters
commit
2840f84f74035e5a535959d5f17269c69fa6edc5 upstream.
The following commands will cause a memory leak:
# cd /sys/kernel/tracing
# mkdir instances/foo
# echo schedule > instance/foo/set_ftrace_filter
# rmdir instances/foo
The reason is that the hashes that hold the filters to set_ftrace_filter and
set_ftrace_notrace are not freed if they contain any data on the instance
and the instance is removed.
Found by kmemleak detector.
Cc: stable@vger.kernel.org
Fixes: 591dffdade9f ("ftrace: Allow for function tracing instance to filter functions")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Steven Rostedt (VMware) [Mon, 10 Dec 2018 02:17:30 +0000 (21:17 -0500)]
tracing: Fix memory leak in set_trigger_filter()
commit
3cec638b3d793b7cacdec5b8072364b41caeb0e1 upstream.
When create_event_filter() fails in set_trigger_filter(), the filter may
still be allocated and needs to be freed. The caller expects the
data->filter to be updated with the new filter, even if the new filter
failed (we could add an error message by setting set_str parameter of
create_event_filter(), but that's another update).
But because the error would just exit, filter was left hanging and
nothing could free it.
Found by kmemleak detector.
Cc: stable@vger.kernel.org
Fixes: bac5fb97a173a ("tracing: Add and use generic set_trigger_filter() implementation")
Reviewed-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Aaro Koskinen [Mon, 19 Nov 2018 23:14:00 +0000 (01:14 +0200)]
MMC: OMAP: fix broken MMC on OMAP15XX/OMAP5910/OMAP310
commit
e8cde625bfe8a714a856e1366bcbb259d7346095 upstream.
Since v2.6.22 or so there has been reports [1] about OMAP MMC being
broken on OMAP15XX based hardware (OMAP5910 and OMAP310). The breakage
seems to have been caused by commit
46a6730e3ff9 ("mmc-omap: Fix
omap to use MMC_POWER_ON") that changed clock enabling to be done
on MMC_POWER_ON. This can happen multiple times in a row, and on 15XX
the hardware doesn't seem to like it and the MMC just stops responding.
Fix by memorizing the power mode and do the init only when necessary.
Before the patch (on Palm TE):
mmc0: new SD card at address b368
mmcblk0: mmc0:b368 SDC 977 MiB
mmci-omap mmci-omap.0: command timeout (CMD18)
mmci-omap mmci-omap.0: command timeout (CMD13)
mmci-omap mmci-omap.0: command timeout (CMD13)
mmci-omap mmci-omap.0: command timeout (CMD12) [x 6]
mmci-omap mmci-omap.0: command timeout (CMD13) [x 6]
mmcblk0: error -110 requesting status
mmci-omap mmci-omap.0: command timeout (CMD8)
mmci-omap mmci-omap.0: command timeout (CMD18)
mmci-omap mmci-omap.0: command timeout (CMD13)
mmci-omap mmci-omap.0: command timeout (CMD13)
mmci-omap mmci-omap.0: command timeout (CMD12) [x 6]
mmci-omap mmci-omap.0: command timeout (CMD13) [x 6]
mmcblk0: error -110 requesting status
mmcblk0: recovery failed!
print_req_error: I/O error, dev mmcblk0, sector 0
Buffer I/O error on dev mmcblk0, logical block 0, async page read
mmcblk0: unable to read partition table
After the patch:
mmc0: new SD card at address b368
mmcblk0: mmc0:b368 SDC 977 MiB
mmcblk0: p1
The patch is based on a fix and analysis done by Ladislav Michl.
Tested on OMAP15XX/OMAP310 (Palm TE), OMAP1710 (Nokia 770)
and OMAP2420 (Nokia N810).
[1] https://marc.info/?t=
123175197000003&r=1&w=2
Fixes: 46a6730e3ff9 ("mmc-omap: Fix omap to use MMC_POWER_ON")
Reported-by: Ladislav Michl <ladis@linux-mips.org>
Reported-by: Andrzej Zaborowski <balrogg@gmail.com>
Tested-by: Ladislav Michl <ladis@linux-mips.org>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jeff Moyer [Tue, 11 Dec 2018 17:37:49 +0000 (12:37 -0500)]
aio: fix spectre gadget in lookup_ioctx
commit
a538e3ff9dabcdf6c3f477a373c629213d1c3066 upstream.
Matthew pointed out that the ioctx_table is susceptible to spectre v1,
because the index can be controlled by an attacker. The below patch
should mitigate the attack for all of the aio system calls.
Cc: stable@vger.kernel.org
Reported-by: Matthew Wilcox <willy@infradead.org>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chen-Yu Tsai [Tue, 4 Dec 2018 09:04:57 +0000 (17:04 +0800)]
pinctrl: sunxi: a83t: Fix IRQ offset typo for PH11
commit
478b6767ad26ab86d9ecc341027dd09a87b1f997 upstream.
Pin PH11 is used on various A83T board to detect a change in the OTG
port's ID pin, as in when an OTG host cable is plugged in.
The incorrect offset meant the gpiochip/irqchip was activating the wrong
pin for interrupts.
Fixes: 4730f33f0d82 ("pinctrl: sunxi: add allwinner A83T PIO controller support")
Cc: <stable@vger.kernel.org>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Guenter Roeck [Sat, 15 Dec 2018 15:30:39 +0000 (07:30 -0800)]
powerpc/boot: Fix random libfdt related build errors
[ Upstream commit
64c3f648c25d108f346fdc96c15180c6b7d250e9 ]
Once in a while I see build errors similar to the following
when building images from a clean tree.
Building powerpc:virtex-ml507:44x/virtex5_defconfig ... failed
------------
Error log:
arch/powerpc/boot/treeboot-akebono.c:37:20: fatal error:
libfdt.h: No such file or directory
Building powerpc:bamboo:smpdev:44x/bamboo_defconfig ... failed
------------
Error log:
arch/powerpc/boot/treeboot-akebono.c:37:20: fatal error:
libfdt.h: No such file or directory
arch/powerpc/boot/treeboot-currituck.c:35:20: fatal error:
libfdt.h: No such file or directory
Rebuilds will succeed.
Turns out that several source files in arch/powerpc/boot/ include
libfdt.h, but Makefile dependencies are incomplete. Let's fix that.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[groeck: Backport to v4.4.y]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ingo Molnar [Mon, 13 Nov 2017 06:15:41 +0000 (07:15 +0100)]
timer/debug: Change /proc/timer_list from 0444 to 0400
[ Upstream commit
8e7df2b5b7f245c9bd11064712db5cb69044a362 ]
While it uses %pK, there's still few reasons to read this file
as non-root.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Davidlohr Bueso [Mon, 10 Jul 2017 22:51:49 +0000 (15:51 -0700)]
lib/interval_tree_test.c: allow users to limit scope of endpoint
[ Upstream commit
a8ec14d4f6aa8e245efacc992c8ee6ea0464ce2a ]
Add a 'max_endpoint' parameter such that users may easily limit the size
of the intervals that are randomly generated.
Link: http://lkml.kernel.org/r/20170518174936.20265-4-dave@stgolabs.net
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Davidlohr Bueso [Fri, 17 Nov 2017 23:28:27 +0000 (15:28 -0800)]
lib/rbtree-test: lower default params
[ Upstream commit
0b548e33e6cb2bff240fdaf1783783be15c29080 ]
Fengguang reported soft lockups while running the rbtree and interval
tree test modules. The logic for these tests all occur in init phase,
and we currently are pounding with the default values for number of
nodes and number of iterations of each test. Reduce the latter by two
orders of magnitude. This does not influence the value of the tests in
that one thousand times by default is enough to get the picture.
Link: http://lkml.kernel.org/r/20171109161715.xai2dtwqw2frhkcm@linux-n805
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Davidlohr Bueso [Fri, 8 Sep 2017 23:14:46 +0000 (16:14 -0700)]
lib/rbtree_test.c: make input module parameters
[ Upstream commit
223f8911eace60c787f8767c25148b80ece9732a ]
Allows for more flexible debugging.
Link: http://lkml.kernel.org/r/20170719014603.19029-5-dave@stgolabs.net
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Davidlohr Bueso [Mon, 10 Jul 2017 22:51:52 +0000 (15:51 -0700)]
lib/interval_tree_test.c: allow full tree search
[ Upstream commit
c46ecce431ebe6b1a9551d1f530eb432dae5c39b ]
... such that a user can specify visiting all the nodes in the tree
(intersects with the world). This is a nice opposite from the very
basic default query which is a single point.
Link: http://lkml.kernel.org/r/20170518174936.20265-5-dave@stgolabs.net
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Davidlohr Bueso [Mon, 10 Jul 2017 22:51:46 +0000 (15:51 -0700)]
lib/interval_tree_test.c: make test options module parameters
[ Upstream commit
a54dae0338b7f01eb0f9c7571fb9b74f791d1c6b ]
Allows for more flexible debugging.
Link: http://lkml.kernel.org/r/20170518174936.20265-3-dave@stgolabs.net
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Greg Kroah-Hartman [Mon, 17 Dec 2018 20:55:18 +0000 (21:55 +0100)]
Linux 4.4.168
Shuah Khan [Thu, 15 Sep 2016 14:36:07 +0000 (08:36 -0600)]
selftests: Move networking/timestamping from Documentation
commit
3d2c86e3057995270e08693231039d9d942871f0 upstream.
Remove networking from Documentation Makefile to move the test to
selftests. Update networking/timestamping Makefile to work under
selftests. These tests will not be run as part of selftests suite
and will not be included in install targets. They can be built and
run separately for now.
This is part of the effort to move runnable code from Documentation.
Acked-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
[ added to 4.4.y stable to remove a build warning - gregkh]
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Arnd Bergmann [Fri, 22 Sep 2017 21:29:18 +0000 (23:29 +0200)]
rocker: fix rocker_tlv_put_* functions for KASAN
commit
6098d7ddd62f532f80ee2a4b01aca500a8e4e9e4 upstream.
Inlining these functions creates lots of stack variables that each take
64 bytes when KASAN is enabled, leading to this warning about potential
stack overflow:
drivers/net/ethernet/rocker/rocker_ofdpa.c: In function 'ofdpa_cmd_flow_tbl_add':
drivers/net/ethernet/rocker/rocker_ofdpa.c:621:1: error: the frame size of 2752 bytes is larger than 1536 bytes [-Werror=frame-larger-than=]
gcc-8 can now consolidate the stack slots itself, but on older versions
we get the same behavior by using a temporary variable that holds a
copy of the inline function argument.
Cc: stable@vger.kernel.org
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=81715
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Guenter Roeck [Sun, 1 Jul 2018 20:57:24 +0000 (13:57 -0700)]
staging: speakup: Replace strncpy with memcpy
commit
fd29edc7232bc19f969e8f463138afc5472b3d5f upstream.
gcc 8.1.0 generates the following warnings.
drivers/staging/speakup/kobjects.c: In function 'punc_store':
drivers/staging/speakup/kobjects.c:522:2: warning:
'strncpy' output truncated before terminating nul
copying as many bytes from a string as its length
drivers/staging/speakup/kobjects.c:504:6: note: length computed here
drivers/staging/speakup/kobjects.c: In function 'synth_store':
drivers/staging/speakup/kobjects.c:391:2: warning:
'strncpy' output truncated before terminating nul
copying as many bytes from a string as its length
drivers/staging/speakup/kobjects.c:388:8: note: length computed here
Using strncpy() is indeed less than perfect since the length of data to
be copied has already been determined with strlen(). Replace strncpy()
with memcpy() to address the warning and optimize the code a little.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sudip Mukherjee [Thu, 25 Aug 2016 17:44:12 +0000 (23:14 +0530)]
matroxfb: fix size of memcpy
commit
59921b239056fb6389a865083284e00ce0518db6 upstream.
hw->DACreg has a size of 80 bytes and MGADACbpp32 has 21. So when
memcpy copies MGADACbpp32 to hw->DACreg it copies 80 bytes but
only 21 bytes are valid.
Signed-off-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Arnd Bergmann [Thu, 30 Nov 2017 16:55:46 +0000 (11:55 -0500)]
media: dvb-frontends: fix i2c access helpers for KASAN
commit
3cd890dbe2a4f14cc44c85bb6cf37e5e22d4dd0e upstream.
A typical code fragment was copied across many dvb-frontend drivers and
causes large stack frames when built with with CONFIG_KASAN on gcc-5/6/7:
drivers/media/dvb-frontends/cxd2841er.c:3225:1: error: the frame size of 3992 bytes is larger than 3072 bytes [-Werror=frame-larger-than=]
drivers/media/dvb-frontends/cxd2841er.c:3404:1: error: the frame size of 3136 bytes is larger than 3072 bytes [-Werror=frame-larger-than=]
drivers/media/dvb-frontends/stv0367.c:3143:1: error: the frame size of 4016 bytes is larger than 3072 bytes [-Werror=frame-larger-than=]
drivers/media/dvb-frontends/stv090x.c:3430:1: error: the frame size of 5312 bytes is larger than 3072 bytes [-Werror=frame-larger-than=]
drivers/media/dvb-frontends/stv090x.c:4248:1: error: the frame size of 4872 bytes is larger than 3072 bytes [-Werror=frame-larger-than=]
gcc-8 now solves this by consolidating the stack slots for the argument
variables, but on older compilers we can get the same behavior by taking
the pointer of a local variable rather than the inline function argument.
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=81715
Cc: stable@vger.kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Willy Tarreau [Fri, 11 May 2018 06:11:44 +0000 (08:11 +0200)]
proc: do not access cmdline nor environ from file-backed areas
commit
7f7ccc2ccc2e70c6054685f5e3522efa81556830 upstream.
proc_pid_cmdline_read() and environ_read() directly access the target
process' VM to retrieve the command line and environment. If this
process remaps these areas onto a file via mmap(), the requesting
process may experience various issues such as extra delays if the
underlying device is slow to respond.
Let's simply refuse to access file-backed areas in these functions.
For this we add a new FOLL_ANON gup flag that is passed to all calls
to access_remote_vm(). The code already takes care of such failures
(including unmapped areas). Accesses via /proc/pid/mem were not
changed though.
This was assigned CVE-2018-1120.
Note for stable backports: the patch may apply to kernels prior to 4.11
but silently miss one location; it must be checked that no call to
access_remote_vm() keeps zero as the last argument.
Reported-by: Qualys Security Advisory <qsa@qualys.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
[bwh: Backported to 4.4:
- Update the extra call to access_remote_vm() from proc_pid_cmdline_read()
- Adjust context]
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Linus Torvalds [Tue, 25 Oct 2016 02:00:44 +0000 (19:00 -0700)]
proc: don't use FOLL_FORCE for reading cmdline and environment
commit
272ddc8b37354c3fe111ab26d25e792629148eee upstream.
Now that Lorenzo cleaned things up and made the FOLL_FORCE users
explicit, it becomes obvious how some of them don't really need
FOLL_FORCE at all.
So remove FOLL_FORCE from the proc code that reads the command line and
arguments from user space.
The mem_rw() function actually does want FOLL_FORCE, because gdd (and
possibly many other debuggers) use it as a much more convenient version
of PTRACE_PEEKDATA, but we should consider making the FOLL_FORCE part
conditional on actually being a ptracer. This does not actually do
that, just moves adds a comment to that effect and moves the gup_flags
settings next to each other.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Lorenzo Stoakes [Thu, 13 Oct 2016 00:20:19 +0000 (01:20 +0100)]
mm: replace access_remote_vm() write parameter with gup_flags
commit
6347e8d5bcce33fc36e651901efefbe2c93a43ef upstream.
This removes the 'write' argument from access_remote_vm() and replaces
it with 'gup_flags' as use of this function previously silently implied
FOLL_FORCE, whereas after this patch callers explicitly pass this flag.
We make this explicit as use of FOLL_FORCE can result in surprising
behaviour (and hence bugs) within the mm subsystem.
Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Lorenzo Stoakes [Thu, 13 Oct 2016 00:20:18 +0000 (01:20 +0100)]
mm: replace __access_remote_vm() write parameter with gup_flags
commit
442486ec1096781c50227b73f721a63974b0fdda upstream.
This removes the 'write' argument from __access_remote_vm() and replaces
it with 'gup_flags' as use of this function previously silently implied
FOLL_FORCE, whereas after this patch callers explicitly pass this flag.
We make this explicit as use of FOLL_FORCE can result in surprising
behaviour (and hence bugs) within the mm subsystem.
Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
[bwh: Backported to 4.4: adjust context]
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Lorenzo Stoakes [Thu, 13 Oct 2016 00:20:16 +0000 (01:20 +0100)]
mm: replace get_user_pages() write/force parameters with gup_flags
commit
768ae309a96103ed02eb1e111e838c87854d8b51 upstream.
This removes the 'write' and 'force' from get_user_pages() and replaces
them with 'gup_flags' to make the use of FOLL_FORCE explicit in callers
as use of this flag can result in surprising behaviour (and hence bugs)
within the mm subsystem.
Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
[bwh: Backported to 4.4:
- Drop changes in rapidio, vchiq, goldfish
- Keep the "write" variable in amdgpu_ttm_tt_pin_userptr() as it's still
needed
- Also update calls from various other places that now use
get_user_pages_remote() upstream, which were updated there by commit
9beae1ea8930 "mm: replace get_user_pages_remote() write/force ..."
- Also update calls from hfi1 and ipath
- Adjust context]
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Lorenzo Stoakes [Thu, 13 Oct 2016 00:20:15 +0000 (01:20 +0100)]
mm: replace get_vaddr_frames() write/force parameters with gup_flags
commit
7f23b3504a0df63b724180262c5f3f117f21bcae upstream.
This removes the 'write' and 'force' from get_vaddr_frames() and
replaces them with 'gup_flags' to make the use of FOLL_FORCE explicit in
callers as use of this flag can result in surprising behaviour (and
hence bugs) within the mm subsystem.
Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Lorenzo Stoakes [Thu, 13 Oct 2016 00:20:14 +0000 (01:20 +0100)]
mm: replace get_user_pages_locked() write/force parameters with gup_flags
commit
3b913179c3fa89dd0e304193fa0c746fc0481447 upstream.
This removes the 'write' and 'force' use from get_user_pages_locked()
and replaces them with 'gup_flags' to make the use of FOLL_FORCE
explicit in callers as use of this flag can result in surprising
behaviour (and hence bugs) within the mm subsystem.
Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
[bwh: Backported to 4.4: adjust context]
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Lorenzo Stoakes [Thu, 13 Oct 2016 00:20:13 +0000 (01:20 +0100)]
mm: replace get_user_pages_unlocked() write/force parameters with gup_flags
commit
c164154f66f0c9b02673f07aa4f044f1d9c70274 upstream.
This removes the 'write' and 'force' use from get_user_pages_unlocked()
and replaces them with 'gup_flags' to make the use of FOLL_FORCE
explicit in callers as use of this flag can result in surprising
behaviour (and hence bugs) within the mm subsystem.
Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
[bwh: Backported to 4.4:
- Also update calls from process_vm_rw_single_vec() and async_pf_execute()
- Adjust context]
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ben Hutchings [Sun, 16 Dec 2018 23:50:08 +0000 (23:50 +0000)]
mm/nommu.c: Switch __get_user_pages_unlocked() to use __get_user_pages()
Extracted from commit
cde70140fed8 "mm/gup: Overload get_user_pages()
functions". This is needed before picking commit
768ae309a961
"mm: replace get_user_pages() write/force parameters with gup_flags".
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Lorenzo Stoakes [Thu, 13 Oct 2016 00:20:12 +0000 (01:20 +0100)]
mm: remove write/force parameters from __get_user_pages_unlocked()
commit
d4944b0ecec0af882483fe44b66729316e575208 upstream.
This removes the redundant 'write' and 'force' parameters from
__get_user_pages_unlocked() to make the use of FOLL_FORCE explicit in
callers as use of this flag can result in surprising behaviour (and
hence bugs) within the mm subsystem.
Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
[bwh: Backported to 4.4:
- Defer changes in process_vm_rw_single_vec() and async_pf_execute() since
they use get_user_pages_unlocked() here
- Adjust context]
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Lorenzo Stoakes [Thu, 13 Oct 2016 00:20:11 +0000 (01:20 +0100)]
mm: remove write/force parameters from __get_user_pages_locked()
commit
859110d7497cdd0e6b21010d6f777049d676382c upstream.
This removes the redundant 'write' and 'force' parameters from
__get_user_pages_locked() to make the use of FOLL_FORCE explicit in
callers as use of this flag can result in surprising behaviour (and
hence bugs) within the mm subsystem.
Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
[bwh: Backported to 4.4:
- Drop change in get_user_pages_remote()
- Adjust context]
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jens Axboe [Mon, 21 May 2018 18:21:14 +0000 (12:21 -0600)]
sr: pass down correctly sized SCSI sense buffer
commit
f7068114d45ec55996b9040e98111afa56e010fe upstream.
We're casting the CDROM layer request_sense to the SCSI sense
buffer, but the former is 64 bytes and the latter is 96 bytes.
As we generally allocate these on the stack, we end up blowing
up the stack.
Fix this by wrapping the scsi_execute() call with a properly
sized sense buffer, and copying back the bits for the CDROM
layer.
Reported-by: Piotr Gabriel Kosinski <pg.kosinski@gmail.com>
Reported-by: Daniel Shapira <daniel@twistlock.com>
Tested-by: Kees Cook <keescook@chromium.org>
Fixes: 82ed4db499b8 ("block: split scsi_request out of struct request")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
[bwh: Despite what the "Fixes" field says, a buffer overrun was already
possible if the sense data was really > 64 bytes long.
Backported to 4.4:
- We always need to allocate a sense buffer in order to call
scsi_normalize_sense()
- Remove the existing conditional heap-allocation of the sense buffer]
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kees Cook [Tue, 10 Jul 2018 23:22:22 +0000 (16:22 -0700)]
swiotlb: clean up reporting
commit
7d63fb3af87aa67aa7d24466e792f9d7c57d8e79 upstream.
This removes needless use of '%p', and refactors the printk calls to
use pr_*() helpers instead.
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
[bwh: Backported to 4.4:
- Adjust filename
- Remove "swiotlb: " prefix from an additional log message]
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mike Kravetz [Thu, 5 Apr 2018 23:18:21 +0000 (16:18 -0700)]
hugetlbfs: fix bug in pgoff overflow checking
commit
5df63c2a149ae65a9ec239e7c2af44efa6f79beb upstream.
This is a fix for a regression in 32 bit kernels caused by an invalid
check for pgoff overflow in hugetlbfs mmap setup. The check incorrectly
specified that the size of a loff_t was the same as the size of a long.
The regression prevents mapping hugetlbfs files at offsets greater than
4GB on 32 bit kernels.
On 32 bit kernels conversion from a page based unsigned long can not
overflow a loff_t byte offset. Therefore, skip this check if
sizeof(unsigned long) != sizeof(loff_t).
Link: http://lkml.kernel.org/r/20180330145402.5053-1-mike.kravetz@oracle.com
Fixes: 63489f8e8211 ("hugetlbfs: check for pgoff value overflow")
Reported-by: Dan Rue <dan.rue@linaro.org>
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Tested-by: Anders Roxell <anders.roxell@linaro.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Yisheng Xie <xieyisheng1@huawei.com>
Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Nic Losby <blurbdust@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mike Kravetz [Thu, 22 Mar 2018 23:17:13 +0000 (16:17 -0700)]
hugetlbfs: check for pgoff value overflow
commit
63489f8e821144000e0bdca7e65a8d1cc23a7ee7 upstream.
A vma with vm_pgoff large enough to overflow a loff_t type when
converted to a byte offset can be passed via the remap_file_pages system
call. The hugetlbfs mmap routine uses the byte offset to calculate
reservations and file size.
A sequence such as:
mmap(0x20a00000, 0x600000, 0, 0x66033, -1, 0);
remap_file_pages(0x20a00000, 0x600000, 0, 0x20000000000000, 0);
will result in the following when task exits/file closed,
kernel BUG at mm/hugetlb.c:749!
Call Trace:
hugetlbfs_evict_inode+0x2f/0x40
evict+0xcb/0x190
__dentry_kill+0xcb/0x150
__fput+0x164/0x1e0
task_work_run+0x84/0xa0
exit_to_usermode_loop+0x7d/0x80
do_syscall_64+0x18b/0x190
entry_SYSCALL_64_after_hwframe+0x3d/0xa2
The overflowed pgoff value causes hugetlbfs to try to set up a mapping
with a negative range (end < start) that leaves invalid state which
causes the BUG.
The previous overflow fix to this code was incomplete and did not take
the remap_file_pages system call into account.
[mike.kravetz@oracle.com: v3]
Link: http://lkml.kernel.org/r/20180309002726.7248-1-mike.kravetz@oracle.com
[akpm@linux-foundation.org: include mmdebug.h]
[akpm@linux-foundation.org: fix -ve left shift count on sh]
Link: http://lkml.kernel.org/r/20180308210502.15952-1-mike.kravetz@oracle.com
Fixes: 045c7a3f53d9 ("hugetlbfs: fix offset overflow in hugetlbfs mmap")
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reported-by: Nic Losby <blurbdust@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Yisheng Xie <xieyisheng1@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
[bwh: Backported to 4.4: Use a conditional WARN() instead of VM_WARN()]
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mike Kravetz [Thu, 13 Apr 2017 21:56:32 +0000 (14:56 -0700)]
hugetlbfs: fix offset overflow in hugetlbfs mmap
commit
045c7a3f53d9403b62d396b6d051c4be5044cdb4 upstream.
If mmap() maps a file, it can be passed an offset into the file at which
the mapping is to start. Offset could be a negative value when
represented as a loff_t. The offset plus length will be used to update
the file size (i_size) which is also a loff_t.
Validate the value of offset and offset + length to make sure they do
not overflow and appear as negative.
Found by syzcaller with commit
ff8c0c53c475 ("mm/hugetlb.c: don't call
region_abort if region_chg fails") applied. Prior to this commit, the
overflow would still occur but we would luckily return ENOMEM.
To reproduce:
mmap(0, 0x2000, 0, 0x40021, 0xffffffffffffffffULL, 0x8000000000000000ULL);
Resulted in,
kernel BUG at mm/hugetlb.c:742!
Call Trace:
hugetlbfs_evict_inode+0x80/0xa0
evict+0x24a/0x620
iput+0x48f/0x8c0
dentry_unlink_inode+0x31f/0x4d0
__dentry_kill+0x292/0x5e0
dput+0x730/0x830
__fput+0x438/0x720
____fput+0x1a/0x20
task_work_run+0xfe/0x180
exit_to_usermode_loop+0x133/0x150
syscall_return_slowpath+0x184/0x1c0
entry_SYSCALL_64_fastpath+0xab/0xad
Fixes: ff8c0c53c475 ("mm/hugetlb.c: don't call region_abort if region_chg fails")
Link: http://lkml.kernel.org/r/1491951118-30678-1-git-send-email-mike.kravetz@oracle.com
Reported-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mike Kravetz [Fri, 31 Mar 2017 22:12:07 +0000 (15:12 -0700)]
mm/hugetlb.c: don't call region_abort if region_chg fails
commit
ff8c0c53c47530ffea82c22a0a6df6332b56c957 upstream.
Changes to hugetlbfs reservation maps is a two step process. The first
step is a call to region_chg to determine what needs to be changed, and
prepare that change. This should be followed by a call to call to
region_add to commit the change, or region_abort to abort the change.
The error path in hugetlb_reserve_pages called region_abort after a
failed call to region_chg. As a result, the adds_in_progress counter in
the reservation map is off by 1. This is caught by a VM_BUG_ON in
resv_map_release when the reservation map is freed.
syzkaller fuzzer (when using an injected kmalloc failure) found this
bug, that resulted in the following:
kernel BUG at mm/hugetlb.c:742!
Call Trace:
hugetlbfs_evict_inode+0x7b/0xa0 fs/hugetlbfs/inode.c:493
evict+0x481/0x920 fs/inode.c:553
iput_final fs/inode.c:1515 [inline]
iput+0x62b/0xa20 fs/inode.c:1542
hugetlb_file_setup+0x593/0x9f0 fs/hugetlbfs/inode.c:1306
newseg+0x422/0xd30 ipc/shm.c:575
ipcget_new ipc/util.c:285 [inline]
ipcget+0x21e/0x580 ipc/util.c:639
SYSC_shmget ipc/shm.c:673 [inline]
SyS_shmget+0x158/0x230 ipc/shm.c:657
entry_SYSCALL_64_fastpath+0x1f/0xc2
RIP: resv_map_release+0x265/0x330 mm/hugetlb.c:742
Link: http://lkml.kernel.org/r/1490821682-23228-1-git-send-email-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Acked-by: Hillf Danton <hillf.zj@alibaba-inc.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Thomas Gleixner [Thu, 1 Nov 2018 20:02:38 +0000 (13:02 -0700)]
posix-timers: Sanitize overrun handling
commit
78c9c4dfbf8c04883941445a195276bb4bb92c76 upstream.
The posix timer overrun handling is broken because the forwarding functions
can return a huge number of overruns which does not fit in an int. As a
consequence timer_getoverrun(2) and siginfo::si_overrun can turn into
random number generators.
The k_clock::timer_forward() callbacks return a 64 bit value now. Make
k_itimer::ti_overrun[_last] 64bit as well, so the kernel internal
accounting is correct. 3Remove the temporary (int) casts.
Add a helper function which clamps the overrun value returned to user space
via timer_getoverrun(2) or siginfo::si_overrun limited to a positive value
between 0 and INT_MAX. INT_MAX is an indicator for user space that the
overrun value has been clamped.
Reported-by: Team OWL337 <icytxw@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: John Stultz <john.stultz@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Link: https://lkml.kernel.org/r/20180626132705.018623573@linutronix.de
[florian: Make patch apply to v4.9.135]
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Lior David [Tue, 14 Nov 2017 13:25:39 +0000 (15:25 +0200)]
wil6210: missing length check in wmi_set_ie
commit
b5a8ffcae4103a9d823ea3aa3a761f65779fbe2a upstream.
Add a length check in wmi_set_ie to detect unsigned integer
overflow.
Signed-off-by: Lior David <qca_liord@qca.qualcomm.com>
Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alexei Starovoitov [Tue, 15 May 2018 16:27:05 +0000 (09:27 -0700)]
bpf: Prevent memory disambiguation attack
commit
af86ca4e3088fe5eacf2f7e58c01fa68ca067672 upstream.
Detect code patterns where malicious 'speculative store bypass' can be used
and sanitize such patterns.
39: (bf) r3 = r10
40: (07) r3 += -216
41: (79) r8 = *(u64 *)(r7 +0) // slow read
42: (7a) *(u64 *)(r10 -72) = 0 // verifier inserts this instruction
43: (7b) *(u64 *)(r8 +0) = r3 // this store becomes slow due to r8
44: (79) r1 = *(u64 *)(r6 +0) // cpu speculatively executes this load
45: (71) r2 = *(u8 *)(r1 +0) // speculatively arbitrary 'load byte'
// is now sanitized
Above code after x86 JIT becomes:
e5: mov %rbp,%rdx
e8: add $0xffffffffffffff28,%rdx
ef: mov 0x0(%r13),%r14
f3: movq $0x0,-0x48(%rbp)
fb: mov %rdx,0x0(%r14)
ff: mov 0x0(%rbx),%rdi
103: movzbq 0x0(%rdi),%rsi
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
[bwh: Backported to 4.4:
- Add verifier_env parameter to check_stack_write()
- Look up stack slot_types with state->stack_slot_type[] rather than
state->stack[].slot_type[]
- Drop bpf_verifier_env argument to verbose()
- Adjust filename, context]
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ben Hutchings [Wed, 5 Dec 2018 22:41:36 +0000 (22:41 +0000)]
bpf/verifier: Pass instruction index to check_mem_access() and check_xadd()
Extracted from commit
31fd85816dbe "bpf: permits narrower load from
bpf program context fields".
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ben Hutchings [Wed, 5 Dec 2018 22:45:15 +0000 (22:45 +0000)]
bpf/verifier: Add spi variable to check_stack_write()
Extracted from commit
dc503a8ad984 "bpf/verifier: track liveness for
pruning".
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alexei Starovoitov [Fri, 2 Sep 2016 01:37:21 +0000 (18:37 -0700)]
bpf: support 8-byte metafield access
commit
cedaf52693f02372010548c63b2e63228b959099 upstream.
The verifier supported only 4-byte metafields in
struct __sk_buff and struct xdp_md. The metafields in upcoming
struct bpf_perf_event are 8-byte to match register width in struct pt_regs.
Teach verifier to recognize 8-byte metafield access.
The patch doesn't affect safety of sockets and xdp programs.
They check for 4-byte only ctx access before these conditions are hit.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tom Lendacky [Thu, 10 May 2018 20:06:39 +0000 (22:06 +0200)]
KVM: SVM: Implement VIRT_SPEC_CTRL support for SSBD
commit
bc226f07dcd3c9ef0b7f6236fe356ea4a9cb4769 upstream.
Expose the new virtualized architectural mechanism, VIRT_SSBD, for using
speculative store bypass disable (SSBD) under SVM. This will allow guests
to use SSBD on hardware that uses non-architectural mechanisms for enabling
SSBD.
[ tglx: Folded the migration fixup from Paolo Bonzini ]
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Borislav Petkov [Wed, 2 May 2018 16:15:14 +0000 (18:15 +0200)]
x86/speculation: Use synthetic bits for IBRS/IBPB/STIBP
commit
e7c587da125291db39ddf1f49b18e5970adbac17 upstream.
Intel and AMD have different CPUID bits hence for those use synthetic bits
which get set on the respective vendor's in init_speculation_control(). So
that debacles like what the commit message of
c65732e4f721 ("x86/cpu: Restore CPUID_8000_0008_EBX reload")
talks about don't happen anymore.
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Tested-by: Jörg Otte <jrg.otte@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Link: https://lkml.kernel.org/r/20180504161815.GG9257@pd.tnic
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[bwh: Backported to 4.4: This was partly applied before; apply just the
missing bits]
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Thomas Gleixner [Wed, 9 May 2018 21:01:01 +0000 (23:01 +0200)]
x86/bugs, KVM: Extend speculation control for VIRT_SPEC_CTRL
commit
ccbcd2674472a978b48c91c1fbfb66c0ff959f24 upstream.
AMD is proposing a VIRT_SPEC_CTRL MSR to handle the Speculative Store
Bypass Disable via MSR_AMD64_LS_CFG so that guests do not have to care
about the bit position of the SSBD bit and thus facilitate migration.
Also, the sibling coordination on Family 17H CPUs can only be done on
the host.
Extend x86_spec_ctrl_set_guest() and x86_spec_ctrl_restore_host() with an
extra argument for the VIRT_SPEC_CTRL MSR.
Hand in 0 from VMX and in SVM add a new virt_spec_ctrl member to the CPU
data structure which is going to be used in later patches for the actual
implementation.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[bwh: Backported to 4.4: This was partly applied before; apply just the
missing bits]
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Thomas Gleixner [Fri, 11 May 2018 13:21:01 +0000 (15:21 +0200)]
KVM: SVM: Move spec control call after restore of GS
commit
15e6c22fd8e5a42c5ed6d487b7c9fe44c2517765 upstream.
svm_vcpu_run() invokes x86_spec_ctrl_restore_host() after VMEXIT, but
before the host GS is restored. x86_spec_ctrl_restore_host() uses 'current'
to determine the host SSBD state of the thread. 'current' is GS based, but
host GS is not yet restored and the access causes a triple fault.
Move the call after the host GS restore.
Fixes: 885f82bfbc6f x86/process: Allow runtime control of Speculative Store Bypass
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Konrad Rzeszutek Wilk [Thu, 26 Apr 2018 02:04:25 +0000 (22:04 -0400)]
x86/KVM/VMX: Expose SPEC_CTRL Bit(2) to the guest
commit
da39556f66f5cfe8f9c989206974f1cb16ca5d7c upstream.
Expose the CPUID.7.EDX[31] bit to the guest, and also guard against various
combinations of SPEC_CTRL MSR values.
The handling of the MSR (to take into account the host value of SPEC_CTRL
Bit(2)) is taken care of in patch:
KVM/SVM/VMX/x86/spectre_v2: Support the combination of guest and host IBRS
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
[dwmw2: Handle 4.9 guest CPUID differences, rename
guest_cpu_has_ibrs() → guest_cpu_has_spec_ctrl()]
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[bwh: Backported to 4.4: Update feature bit name]
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Konrad Rzeszutek Wilk [Thu, 26 Apr 2018 02:04:19 +0000 (22:04 -0400)]
x86/bugs, KVM: Support the combination of guest and host IBRS
commit
5cf687548705412da47c9cec342fd952d71ed3d5 upstream.
A guest may modify the SPEC_CTRL MSR from the value used by the
kernel. Since the kernel doesn't use IBRS, this means a value of zero is
what is needed in the host.
But the 336996-Speculative-Execution-Side-Channel-Mitigations.pdf refers to
the other bits as reserved so the kernel should respect the boot time
SPEC_CTRL value and use that.
This allows to deal with future extensions to the SPEC_CTRL interface if
any at all.
Note: This uses wrmsrl() instead of native_wrmsl(). I does not make any
difference as paravirt will over-write the callq *0xfff.. with the wrmsrl
assembler code.
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
[bwh: Backported to 4.4: This was partly applied before; apply just the
missing bits]
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dan Williams [Tue, 30 Jan 2018 01:02:49 +0000 (17:02 -0800)]
x86/uaccess: Use __uaccess_begin_nospec() and uaccess_try_nospec
commit
304ec1b050310548db33063e567123fae8fd0301 upstream.
Quoting Linus:
I do think that it would be a good idea to very expressly document
the fact that it's not that the user access itself is unsafe. I do
agree that things like "get_user()" want to be protected, but not
because of any direct bugs or problems with get_user() and friends,
but simply because get_user() is an excellent source of a pointer
that is obviously controlled from a potentially attacking user
space. So it's a prime candidate for then finding _subsequent_
accesses that can then be used to perturb the cache.
__uaccess_begin_nospec() covers __get_user() and copy_from_iter() where the
limit check is far away from the user pointer de-reference. In those cases
a barrier_nospec() prevents speculation with a potential pointer to
privileged memory. uaccess_try_nospec covers get_user_try.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Suggested-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-arch@vger.kernel.org
Cc: Kees Cook <keescook@chromium.org>
Cc: kernel-hardening@lists.openwall.com
Cc: gregkh@linuxfoundation.org
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: alan@linux.intel.com
Link: https://lkml.kernel.org/r/151727416953.33451.10508284228526170604.stgit@dwillia2-desk3.amr.corp.intel.com
[bwh: Backported to 4.4:
- Convert several more functions to use __uaccess_begin_nospec(), that
are just wrappers in mainline
- Adjust context]
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dan Williams [Tue, 30 Jan 2018 01:02:44 +0000 (17:02 -0800)]
x86/usercopy: Replace open coded stac/clac with __uaccess_{begin, end}
commit
b5c4ae4f35325d520b230bab6eb3310613b72ac1 upstream.
In preparation for converting some __uaccess_begin() instances to
__uacess_begin_nospec(), make sure all 'from user' uaccess paths are
using the _begin(), _end() helpers rather than open-coded stac() and
clac().
No functional changes.
Suggested-by: Ingo Molnar <mingo@redhat.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-arch@vger.kernel.org
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: kernel-hardening@lists.openwall.com
Cc: gregkh@linuxfoundation.org
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: torvalds@linux-foundation.org
Cc: alan@linux.intel.com
Link: https://lkml.kernel.org/r/151727416438.33451.17309465232057176966.stgit@dwillia2-desk3.amr.corp.intel.com
[bwh: Backported to 4.4:
- Convert several more functions to use __uaccess_begin_nospec(), that
are just wrappers in mainline
- Adjust context]
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dan Williams [Tue, 30 Jan 2018 01:02:39 +0000 (17:02 -0800)]
x86: Introduce __uaccess_begin_nospec() and uaccess_try_nospec
commit
b3bbfb3fb5d25776b8e3f361d2eedaabb0b496cd upstream.
For __get_user() paths, do not allow the kernel to speculate on the value
of a user controlled pointer. In addition to the 'stac' instruction for
Supervisor Mode Access Protection (SMAP), a barrier_nospec() causes the
access_ok() result to resolve in the pipeline before the CPU might take any
speculative action on the pointer value. Given the cost of 'stac' the
speculation barrier is placed after 'stac' to hopefully overlap the cost of
disabling SMAP with the cost of flushing the instruction pipeline.
Since __get_user is a major kernel interface that deals with user
controlled pointers, the __uaccess_begin_nospec() mechanism will prevent
speculative execution past an access_ok() permission check. While
speculative execution past access_ok() is not enough to lead to a kernel
memory leak, it is a necessary precondition.
To be clear, __uaccess_begin_nospec() is addressing a class of potential
problems near __get_user() usages.
Note, that while the barrier_nospec() in __uaccess_begin_nospec() is used
to protect __get_user(), pointer masking similar to array_index_nospec()
will be used for get_user() since it incorporates a bounds check near the
usage.
uaccess_try_nospec provides the same mechanism for get_user_try.
No functional changes.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Suggested-by: Andi Kleen <ak@linux.intel.com>
Suggested-by: Ingo Molnar <mingo@redhat.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-arch@vger.kernel.org
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: kernel-hardening@lists.openwall.com
Cc: gregkh@linuxfoundation.org
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: alan@linux.intel.com
Link: https://lkml.kernel.org/r/151727415922.33451.5796614273104346583.stgit@dwillia2-desk3.amr.corp.intel.com
[bwh: Backported to 4.4: use current_thread_info()]
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Linus Torvalds [Tue, 23 Feb 2016 22:58:52 +0000 (14:58 -0800)]
x86: fix SMAP in 32-bit environments
commit
de9e478b9d49f3a0214310d921450cf5bb4a21e6 upstream.
In commit
11f1a4b9755f ("x86: reorganize SMAP handling in user space
accesses") I changed how the stac/clac instructions were generated
around the user space accesses, which then made it possible to do
batched accesses efficiently for user string copies etc.
However, in doing so, I completely spaced out, and didn't even think
about the 32-bit case. And nobody really even seemed to notice, because
SMAP doesn't even exist until modern Skylake processors, and you'd have
to be crazy to run 32-bit kernels on a modern CPU.
Which brings us to Andy Lutomirski.
He actually tested the 32-bit kernel on new hardware, and noticed that
it doesn't work. My bad. The trivial fix is to add the required
uaccess begin/end markers around the raw accesses in <asm/uaccess_32.h>.
I feel a bit bad about this patch, just because that header file really
should be cleaned up to avoid all the duplicated code in it, and this
commit just expands on the problem. But this just fixes the bug without
any bigger cleanup surgery.
Reported-and-tested-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Linus Torvalds [Thu, 17 Dec 2015 17:45:09 +0000 (09:45 -0800)]
x86: reorganize SMAP handling in user space accesses
commit
11f1a4b9755f5dbc3e822a96502ebe9b044b14d8 upstream.
This reorganizes how we do the stac/clac instructions in the user access
code. Instead of adding the instructions directly to the same inline
asm that does the actual user level access and exception handling, add
them at a higher level.
This is mainly preparation for the next step, where we will expose an
interface to allow users to mark several accesses together as being user
space accesses, but it does already clean up some code:
- the inlined trivial cases of copy_in_user() now do stac/clac just
once over the accesses: they used to do one pair around the user
space read, and another pair around the write-back.
- the {get,put}_user_ex() macros that are used with the catch/try
handling don't do any stac/clac at all, because that happens in the
try/catch surrounding them.
Other than those two cleanups that happened naturally from the
re-organization, this should not make any difference. Yet.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Paolo Bonzini [Thu, 22 Feb 2018 15:43:17 +0000 (16:43 +0100)]
KVM/x86: Remove indirect MSR op calls from SPEC_CTRL
commit
ecb586bd29c99fb4de599dec388658e74388daad upstream.
Having a paravirt indirect call in the IBRS restore path is not a
good idea, since we are trying to protect from speculative execution
of bogus indirect branch targets. It is also slower, so use
native_wrmsrl() on the vmentry path too.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: KarimAllah Ahmed <karahmed@amazon.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: kvm@vger.kernel.org
Cc: stable@vger.kernel.org
Fixes: d28b387fb74da95d69d2615732f50cceb38e9a4d
Link: http://lkml.kernel.org/r/20180222154318.20361-2-pbonzini@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[bwh: Backported to 4.4: adjust context]
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
KarimAllah Ahmed [Sat, 3 Feb 2018 14:56:23 +0000 (15:56 +0100)]
KVM/SVM: Allow direct access to MSR_IA32_SPEC_CTRL
commit
b2ac58f90540e39324e7a29a7ad471407ae0bf48 upstream.
[ Based on a patch from Paolo Bonzini <pbonzini@redhat.com> ]
... basically doing exactly what we do for VMX:
- Passthrough SPEC_CTRL to guests (if enabled in guest CPUID)
- Save and restore SPEC_CTRL around VMExit and VMEntry only if the guest
actually used it.
Signed-off-by: KarimAllah Ahmed <karahmed@amazon.de>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jun Nakajima <jun.nakajima@intel.com>
Cc: kvm@vger.kernel.org
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Asit Mallick <asit.k.mallick@intel.com>
Cc: Arjan Van De Ven <arjan.van.de.ven@intel.com>
Cc: Greg KH <gregkh@linuxfoundation.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Ashok Raj <ashok.raj@intel.com>
Link: https://lkml.kernel.org/r/1517669783-20732-1-git-send-email-karahmed@amazon.de
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
KarimAllah Ahmed [Thu, 1 Feb 2018 21:59:45 +0000 (22:59 +0100)]
KVM/VMX: Allow direct access to MSR_IA32_SPEC_CTRL
commit
d28b387fb74da95d69d2615732f50cceb38e9a4d upstream.
[ Based on a patch from Ashok Raj <ashok.raj@intel.com> ]
Add direct access to MSR_IA32_SPEC_CTRL for guests. This is needed for
guests that will only mitigate Spectre V2 through IBRS+IBPB and will not
be using a retpoline+IBPB based approach.
To avoid the overhead of saving and restoring the MSR_IA32_SPEC_CTRL for
guests that do not actually use the MSR, only start saving and restoring
when a non-zero is written to it.
No attempt is made to handle STIBP here, intentionally. Filtering STIBP
may be added in a future patch, which may require trapping all writes
if we don't want to pass it through directly to the guest.
[dwmw2: Clean up CPUID bits, save/restore manually, handle reset]
Signed-off-by: KarimAllah Ahmed <karahmed@amazon.de>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jun Nakajima <jun.nakajima@intel.com>
Cc: kvm@vger.kernel.org
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Asit Mallick <asit.k.mallick@intel.com>
Cc: Arjan Van De Ven <arjan.van.de.ven@intel.com>
Cc: Greg KH <gregkh@linuxfoundation.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Ashok Raj <ashok.raj@intel.com>
Link: https://lkml.kernel.org/r/1517522386-18410-5-git-send-email-karahmed@amazon.de
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
KarimAllah Ahmed [Thu, 1 Feb 2018 21:59:44 +0000 (22:59 +0100)]
KVM/VMX: Emulate MSR_IA32_ARCH_CAPABILITIES
commit
28c1c9fabf48d6ad596273a11c46e0d0da3e14cd upstream.
Intel processors use MSR_IA32_ARCH_CAPABILITIES MSR to indicate RDCL_NO
(bit 0) and IBRS_ALL (bit 1). This is a read-only MSR. By default the
contents will come directly from the hardware, but user-space can still
override it.
[dwmw2: The bit in kvm_cpuid_7_0_edx_x86_features can be unconditional]
Signed-off-by: KarimAllah Ahmed <karahmed@amazon.de>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jun Nakajima <jun.nakajima@intel.com>
Cc: kvm@vger.kernel.org
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Asit Mallick <asit.k.mallick@intel.com>
Cc: Arjan Van De Ven <arjan.van.de.ven@intel.com>
Cc: Greg KH <gregkh@linuxfoundation.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Ashok Raj <ashok.raj@intel.com>
Link: https://lkml.kernel.org/r/1517522386-18410-4-git-send-email-karahmed@amazon.de
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[bwh: Backported to 4.4: adjust context]
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ashok Raj [Thu, 1 Feb 2018 21:59:43 +0000 (22:59 +0100)]
KVM/x86: Add IBPB support
commit
15d45071523d89b3fb7372e2135fbd72f6af9506 upstream.
The Indirect Branch Predictor Barrier (IBPB) is an indirect branch
control mechanism. It keeps earlier branches from influencing
later ones.
Unlike IBRS and STIBP, IBPB does not define a new mode of operation.
It's a command that ensures predicted branch targets aren't used after
the barrier. Although IBRS and IBPB are enumerated by the same CPUID
enumeration, IBPB is very different.
IBPB helps mitigate against three potential attacks:
* Mitigate guests from being attacked by other guests.
- This is addressed by issing IBPB when we do a guest switch.
* Mitigate attacks from guest/ring3->host/ring3.
These would require a IBPB during context switch in host, or after
VMEXIT. The host process has two ways to mitigate
- Either it can be compiled with retpoline
- If its going through context switch, and has set !dumpable then
there is a IBPB in that path.
(Tim's patch: https://patchwork.kernel.org/patch/
10192871)
- The case where after a VMEXIT you return back to Qemu might make
Qemu attackable from guest when Qemu isn't compiled with retpoline.
There are issues reported when doing IBPB on every VMEXIT that resulted
in some tsc calibration woes in guest.
* Mitigate guest/ring0->host/ring0 attacks.
When host kernel is using retpoline it is safe against these attacks.
If host kernel isn't using retpoline we might need to do a IBPB flush on
every VMEXIT.
Even when using retpoline for indirect calls, in certain conditions 'ret'
can use the BTB on Skylake-era CPUs. There are other mitigations
available like RSB stuffing/clearing.
* IBPB is issued only for SVM during svm_free_vcpu().
VMX has a vmclear and SVM doesn't. Follow discussion here:
https://lkml.org/lkml/2018/1/15/146
Please refer to the following spec for more details on the enumeration
and control.
Refer here to get documentation about mitigations.
https://software.intel.com/en-us/side-channel-security-support
[peterz: rebase and changelog rewrite]
[karahmed: - rebase
- vmx: expose PRED_CMD if guest has it in CPUID
- svm: only pass through IBPB if guest has it in CPUID
- vmx: support !cpu_has_vmx_msr_bitmap()]
- vmx: support nested]
[dwmw2: Expose CPUID bit too (AMD IBPB only for now as we lack IBRS)
PRED_CMD is a write-only MSR]
Signed-off-by: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: KarimAllah Ahmed <karahmed@amazon.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: kvm@vger.kernel.org
Cc: Asit Mallick <asit.k.mallick@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Arjan Van De Ven <arjan.van.de.ven@intel.com>
Cc: Greg KH <gregkh@linuxfoundation.org>
Cc: Jun Nakajima <jun.nakajima@intel.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Link: http://lkml.kernel.org/r/1515720739-43819-6-git-send-email-ashok.raj@intel.com
Link: https://lkml.kernel.org/r/1517522386-18410-3-git-send-email-karahmed@amazon.de
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[bwh: Backported to 4.4: adjust context]
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Paolo Bonzini [Tue, 16 Jan 2018 15:51:18 +0000 (16:51 +0100)]
KVM: VMX: make MSR bitmaps per-VCPU
commit
904e14fb7cb96401a7dc803ca2863fd5ba32ffe6 upstream.
Place the MSR bitmap in struct loaded_vmcs, and update it in place
every time the x2apic or APICv state can change. This is rare and
the loop can handle 64 MSRs per iteration, in a similar fashion as
nested_vmx_prepare_msr_bitmap.
This prepares for choosing, on a per-VM basis, whether to intercept
the SPEC_CTRL and PRED_CMD MSRs.
Suggested-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[bwh: Backported to 4.4:
- APICv support looked different
- We still need to intercept the APIC_ID MSR
- Adjust context]
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Paolo Bonzini [Thu, 11 Jan 2018 11:16:15 +0000 (12:16 +0100)]
KVM: VMX: introduce alloc_loaded_vmcs
commit
f21f165ef922c2146cc5bdc620f542953c41714b upstream.
Group together the calls to alloc_vmcs and loaded_vmcs_init. Soon we'll also
allocate an MSR bitmap there.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[bwh: Backported to 4.4:
- No loaded_vmcs::shadow_vmcs field to initialise
- Adjust context]
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jim Mattson [Mon, 27 Nov 2017 23:22:25 +0000 (17:22 -0600)]
KVM: nVMX: Eliminate vmcs02 pool
commit
de3a0021a60635de96aa92713c1a31a96747d72c upstream.
The potential performance advantages of a vmcs02 pool have never been
realized. To simplify the code, eliminate the pool. Instead, a single
vmcs02 is allocated per VCPU when the VCPU enters VMX operation.
Signed-off-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Mark Kanda <mark.kanda@oracle.com>
Reviewed-by: Ameya More <ameya.more@oracle.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[bwh: Backported to 4.4:
- No loaded_vmcs::shadow_vmcs field to initialise
- Adjust context]
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
David Matlack [Tue, 1 Aug 2017 21:00:40 +0000 (14:00 -0700)]
KVM: nVMX: mark vmcs12 pages dirty on L2 exit
commit
c9f04407f2e0b3fc9ff7913c65fcfcb0a4b61570 upstream.
The host physical addresses of L1's Virtual APIC Page and Posted
Interrupt descriptor are loaded into the VMCS02. The CPU may write
to these pages via their host physical address while L2 is running,
bypassing address-translation-based dirty tracking (e.g. EPT write
protection). Mark them dirty on every exit from L2 to prevent them
from getting out of sync with dirty tracking.
Also mark the virtual APIC page and the posted interrupt descriptor
dirty when KVM is virtualizing posted interrupt processing.
Signed-off-by: David Matlack <dmatlack@google.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Radim Krčmář [Mon, 8 Aug 2016 18:16:22 +0000 (20:16 +0200)]
KVM: nVMX: fix msr bitmaps to prevent L2 from accessing L0 x2APIC
commit
d048c098218e91ed0e10dfa1f0f80e2567fe4ef7 upstream.
msr bitmap can be used to avoid a VM exit (interception) on guest MSR
accesses. In some configurations of VMX controls, the guest can even
directly access host's x2APIC MSRs. See SDM 29.5 VIRTUALIZING MSR-BASED
APIC ACCESSES.
L2 could read all L0's x2APIC MSRs and write TPR, EOI, and SELF_IPI.
To do so, L1 would first trick KVM to disable all possible interceptions
by enabling APICv features and then would turn those features off;
nested_vmx_merge_msr_bitmap() only disabled interceptions, so VMX would
not intercept previously enabled MSRs even though they were not safe
with the new configuration.
Correctly re-enabling interceptions is not enough as a second bug would
still allow L1+L2 to access host's MSRs: msr bitmap was shared for all
VMCSs, so L1 could trigger a race to get the desired combination of msr
bitmap and VMX controls.
This fix allocates a msr bitmap for every L1 VCPU, allows only safe
x2APIC MSRs from L1's msr bitmap, and disables msr bitmaps if they would
have to intercept everything anyway.
Fixes: 3af18d9c5fe9 ("KVM: nVMX: Prepare for using hardware MSR bitmap")
Reported-by: Jim Mattson <jmattson@google.com>
Suggested-by: Wincy Van <fanwenyi0529@gmail.com>
Reviewed-by: Wanpeng Li <wanpeng.li@hotmail.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
[bwh: Backported to 4.4:
- handle_vmon() doesn't allocate a cached vmcs12
- Adjust context]
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Takashi Sakamoto [Wed, 14 Jun 2017 10:30:03 +0000 (19:30 +0900)]
ALSA: pcm: remove SNDRV_PCM_IOCTL1_INFO internal command
commit
e11f0f90a626f93899687b1cc909ee37dd6c5809 upstream.
Drivers can implement 'struct snd_pcm_ops.ioctl' to handle some requests
from ALSA PCM core. These requests are internal purpose in kernel land.
Usually common set of operations are used for it.
SNDRV_PCM_IOCTL1_INFO is one of the requests. According to code comment,
it has been obsoleted in the old days.
We can see old releases in ftp.alsa-project.org. The command was firstly
introduced in v0.5.0 release as SND_PCM_IOCTL1_INFO, to allow drivers to
fill data of 'struct snd_pcm_channel_info' type. In v0.9.0 release,
this was obsoleted by the other commands for ioctl(2) such as
SNDRV_PCM_IOCTL_CHANNEL_INFO.
This commit removes the long-abandoned command, bye.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Namhyung Kim [Wed, 19 Oct 2016 01:23:41 +0000 (10:23 +0900)]
pstore: Convert console write to use ->write_buf
[ Upstream commit
70ad35db3321a6d129245979de4ac9d06eed897c ]
Maybe I'm missing something, but I don't know why it needs to copy the
input buffer to psinfo->buf and then write. Instead we can write the
input buffer directly. The only implementation that supports console
message (i.e. ramoops) already does it for ftrace messages.
For the upcoming virtio backend driver, it needs to protect psinfo->buf
overwritten from console messages. If it could use ->write_buf method
instead of ->write, the problem will be solved easily.
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Pan Bian [Fri, 30 Nov 2018 22:10:54 +0000 (14:10 -0800)]
ocfs2: fix potential use after free
[ Upstream commit
164f7e586739d07eb56af6f6d66acebb11f315c8 ]
ocfs2_get_dentry() calls iput(inode) to drop the reference count of
inode, and if the reference count hits 0, inode is freed. However, in
this function, it then reads inode->i_generation, which may result in a
use after free bug. Move the put operation later.
Link: http://lkml.kernel.org/r/1543109237-110227-1-git-send-email-bianpan2016@163.com
Fixes: 781f200cb7a("ocfs2: Remove masklog ML_EXPORT.")
Signed-off-by: Pan Bian <bianpan2016@163.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <jiangqi903@gmail.com>
Cc: Changwei Ge <ge.changwei@h3c.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Qian Cai [Fri, 30 Nov 2018 22:09:48 +0000 (14:09 -0800)]
debugobjects: avoid recursive calls with kmemleak
[ Upstream commit
8de456cf87ba863e028c4dd01bae44255ce3d835 ]
CONFIG_DEBUG_OBJECTS_RCU_HEAD does not play well with kmemleak due to
recursive calls.
fill_pool
kmemleak_ignore
make_black_object
put_object
__call_rcu (kernel/rcu/tree.c)
debug_rcu_head_queue
debug_object_activate
debug_object_init
fill_pool
kmemleak_ignore
make_black_object
...
So add SLAB_NOLEAKTRACE to kmem_cache_create() to not register newly
allocated debug objects at all.
Link: http://lkml.kernel.org/r/20181126165343.2339-1-cai@gmx.us
Signed-off-by: Qian Cai <cai@gmx.us>
Suggested-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Waiman Long <longman@redhat.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Yang Shi <yang.shi@linux.alibaba.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Pan Bian [Fri, 30 Nov 2018 22:09:18 +0000 (14:09 -0800)]
hfsplus: do not free node before using
[ Upstream commit
c7d7d620dcbd2a1c595092280ca943f2fced7bbd ]
hfs_bmap_free() frees node via hfs_bnode_put(node). However it then
reads node->this when dumping error message on an error path, which may
result in a use-after-free bug. This patch frees node only when it is
never used.
Link: http://lkml.kernel.org/r/1543053441-66942-1-git-send-email-bianpan2016@163.com
Signed-off-by: Pan Bian <bianpan2016@163.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Ernesto A. Fernandez <ernesto.mnd.fernandez@gmail.com>
Cc: Joe Perches <joe@perches.com>
Cc: Viacheslav Dubeyko <slava@dubeyko.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Pan Bian [Fri, 30 Nov 2018 22:09:14 +0000 (14:09 -0800)]
hfs: do not free node before using
[ Upstream commit
ce96a407adef126870b3f4a1b73529dd8aa80f49 ]
hfs_bmap_free() frees the node via hfs_bnode_put(node). However, it
then reads node->this when dumping error message on an error path, which
may result in a use-after-free bug. This patch frees the node only when
it is never again used.
Link: http://lkml.kernel.org/r/1542963889-128825-1-git-send-email-bianpan2016@163.com
Fixes: a1185ffa2fc ("HFS rewrite")
Signed-off-by: Pan Bian <bianpan2016@163.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Joe Perches <joe@perches.com>
Cc: Ernesto A. Fernandez <ernesto.mnd.fernandez@gmail.com>
Cc: Viacheslav Dubeyko <slava@dubeyko.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Larry Chen [Fri, 30 Nov 2018 22:08:56 +0000 (14:08 -0800)]
ocfs2: fix deadlock caused by ocfs2_defrag_extent()
[ Upstream commit
e21e57445a64598b29a6f629688f9b9a39e7242a ]
ocfs2_defrag_extent may fall into deadlock.
ocfs2_ioctl_move_extents
ocfs2_ioctl_move_extents
ocfs2_move_extents
ocfs2_defrag_extent
ocfs2_lock_allocators_move_extents
ocfs2_reserve_clusters
inode_lock GLOBAL_BITMAP_SYSTEM_INODE
__ocfs2_flush_truncate_log
inode_lock GLOBAL_BITMAP_SYSTEM_INODE
As backtrace shows above, ocfs2_reserve_clusters() will call inode_lock
against the global bitmap if local allocator has not sufficient cluters.
Once global bitmap could meet the demand, ocfs2_reserve_cluster will
return success with global bitmap locked.
After ocfs2_reserve_cluster(), if truncate log is full,
__ocfs2_flush_truncate_log() will definitely fall into deadlock because
it needs to inode_lock global bitmap, which has already been locked.
To fix this bug, we could remove from
ocfs2_lock_allocators_move_extents() the code which intends to lock
global allocator, and put the removed code after
__ocfs2_flush_truncate_log().
ocfs2_lock_allocators_move_extents() is referred by 2 places, one is
here, the other does not need the data allocator context, which means
this patch does not affect the caller so far.
Link: http://lkml.kernel.org/r/20181101071422.14470-1-lchen@suse.com
Signed-off-by: Larry Chen <lchen@suse.com>
Reviewed-by: Changwei Ge <ge.changwei@h3c.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <jiangqi903@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Colin Ian King [Tue, 17 Jul 2018 08:53:42 +0000 (09:53 +0100)]
fscache, cachefiles: remove redundant variable 'cache'
[ Upstream commit
31ffa563833576bd49a8bf53120568312755e6e2 ]
Variable 'cache' is being assigned but is never used hence it is
redundant and can be removed.
Cleans up clang warning:
warning: variable 'cache' set but not used [-Wunused-but-set-variable]
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
NeilBrown [Fri, 26 Oct 2018 06:16:29 +0000 (17:16 +1100)]
fscache: fix race between enablement and dropping of object
[ Upstream commit
c5a94f434c82529afda290df3235e4d85873c5b4 ]
It was observed that a process blocked indefintely in
__fscache_read_or_alloc_page(), waiting for FSCACHE_COOKIE_LOOKING_UP
to be cleared via fscache_wait_for_deferred_lookup().
At this time, ->backing_objects was empty, which would normaly prevent
__fscache_read_or_alloc_page() from getting to the point of waiting.
This implies that ->backing_objects was cleared *after*
__fscache_read_or_alloc_page was was entered.
When an object is "killed" and then "dropped",
FSCACHE_COOKIE_LOOKING_UP is cleared in fscache_lookup_failure(), then
KILL_OBJECT and DROP_OBJECT are "called" and only in DROP_OBJECT is
->backing_objects cleared. This leaves a window where
something else can set FSCACHE_COOKIE_LOOKING_UP and
__fscache_read_or_alloc_page() can start waiting, before
->backing_objects is cleared
There is some uncertainty in this analysis, but it seems to be fit the
observations. Adding the wake in this patch will be handled correctly
by __fscache_read_or_alloc_page(), as it checks if ->backing_objects
is empty again, after waiting.
Customer which reported the hang, also report that the hang cannot be
reproduced with this fix.
The backtrace for the blocked process looked like:
PID: 29360 TASK:
ffff881ff2ac0f80 CPU: 3 COMMAND: "zsh"
#0 [
ffff881ff43efbf8] schedule at
ffffffff815e56f1
#1 [
ffff881ff43efc58] bit_wait at
ffffffff815e64ed
#2 [
ffff881ff43efc68] __wait_on_bit at
ffffffff815e61b8
#3 [
ffff881ff43efca0] out_of_line_wait_on_bit at
ffffffff815e625e
#4 [
ffff881ff43efd08] fscache_wait_for_deferred_lookup at
ffffffffa04f2e8f [fscache]
#5 [
ffff881ff43efd18] __fscache_read_or_alloc_page at
ffffffffa04f2ffe [fscache]
#6 [
ffff881ff43efd58] __nfs_readpage_from_fscache at
ffffffffa0679668 [nfs]
#7 [
ffff881ff43efd78] nfs_readpage at
ffffffffa067092b [nfs]
#8 [
ffff881ff43efda0] generic_file_read_iter at
ffffffff81187a73
#9 [
ffff881ff43efe50] nfs_file_read at
ffffffffa066544b [nfs]
#10 [
ffff881ff43efe70] __vfs_read at
ffffffff811fc756
#11 [
ffff881ff43efee8] vfs_read at
ffffffff811fccfa
#12 [
ffff881ff43eff18] sys_read at
ffffffff811fda62
#13 [
ffff881ff43eff50] entry_SYSCALL_64_fastpath at
ffffffff815e986e
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Srikanth Boddepalli [Tue, 27 Nov 2018 14:23:27 +0000 (19:53 +0530)]
xen: xlate_mmu: add missing header to fix 'W=1' warning
[ Upstream commit
72791ac854fea36034fa7976b748fde585008e78 ]
Add a missing header otherwise compiler warns about missed prototype:
drivers/xen/xlate_mmu.c:183:5: warning: no previous prototype for 'xen_xlate_unmap_gfn_range?' [-Wmissing-prototypes]
int xen_xlate_unmap_gfn_range(struct vm_area_struct *vma,
^~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Srikanth Boddepalli <boddepalli.srikanth@gmail.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Reviewed-by: Joey Pabalinas <joeypabalinas@gmail.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Y.C. Chen [Thu, 22 Nov 2018 03:56:28 +0000 (11:56 +0800)]
drm/ast: fixed reading monitor EDID not stable issue
[ Upstream commit
300625620314194d9e6d4f6dda71f2dc9cf62d9f ]
v1: over-sample data to increase the stability with some specific monitors
v2: refine to avoid infinite loop
v3: remove un-necessary "volatile" declaration
[airlied: fix two checkpatch warnings]
Signed-off-by: Y.C. Chen <yc_chen@aspeedtech.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1542858988-1127-1-git-send-email-yc_chen@aspeedtech.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Pan Bian [Wed, 28 Nov 2018 07:30:24 +0000 (15:30 +0800)]
net: hisilicon: remove unexpected free_netdev
[ Upstream commit
c758940158bf29fe14e9d0f89d5848f227b48134 ]
The net device ndev is freed via free_netdev when failing to register
the device. The control flow then jumps to the error handling code
block. ndev is used and freed again. Resulting in a use-after-free bug.
Signed-off-by: Pan Bian <bianpan2016@163.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Josh Elsasser [Sat, 24 Nov 2018 20:57:33 +0000 (12:57 -0800)]
ixgbe: recognize 1000BaseLX SFP modules as 1Gbps
[ Upstream commit
a8bf879af7b1999eba36303ce9cc60e0e7dd816c ]
Add the two 1000BaseLX enum values to the X550's check for 1Gbps modules,
allowing the core driver code to establish a link over this SFP type.
This is done by the out-of-tree driver but the fix wasn't in mainline.
Fixes: e23f33367882 ("ixgbe: Fix 1G and 10G link stability for X550EM_x SFP+”)
Fixes: 6a14ee0cfb19 ("ixgbe: Add X550 support function pointers")
Signed-off-by: Josh Elsasser <jelsasser@appneta.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Lorenzo Bianconi [Mon, 26 Nov 2018 14:07:16 +0000 (15:07 +0100)]
net: thunderx: fix NULL pointer dereference in nic_remove
[ Upstream commit
24a6d2dd263bc910de018c78d1148b3e33b94512 ]
Fix a possible NULL pointer dereference in nic_remove routine
removing the nicpf module if nic_probe fails.
The issue can be triggered with the following reproducer:
$rmmod nicvf
$rmmod nicpf
[ 521.412008] Unable to handle kernel access to user memory outside uaccess routines at virtual address
0000000000000014
[ 521.422777] Mem abort info:
[ 521.425561] ESR = 0x96000004
[ 521.428624] Exception class = DABT (current EL), IL = 32 bits
[ 521.434535] SET = 0, FnV = 0
[ 521.437579] EA = 0, S1PTW = 0
[ 521.440730] Data abort info:
[ 521.443603] ISV = 0, ISS = 0x00000004
[ 521.447431] CM = 0, WnR = 0
[ 521.450417] user pgtable: 4k pages, 48-bit VAs, pgdp =
0000000072a3da42
[ 521.457022] [
0000000000000014] pgd=
0000000000000000
[ 521.461916] Internal error: Oops:
96000004 [#1] SMP
[ 521.511801] Hardware name: GIGABYTE H270-T70/MT70-HD0, BIOS T49 02/02/2018
[ 521.518664] pstate:
80400005 (Nzcv daif +PAN -UAO)
[ 521.523451] pc : nic_remove+0x24/0x88 [nicpf]
[ 521.527808] lr : pci_device_remove+0x48/0xd8
[ 521.532066] sp :
ffff000013433cc0
[ 521.535370] x29:
ffff000013433cc0 x28:
ffff810f6ac50000
[ 521.540672] x27:
0000000000000000 x26:
0000000000000000
[ 521.545974] x25:
0000000056000000 x24:
0000000000000015
[ 521.551274] x23:
ffff8007ff89a110 x22:
ffff000001667070
[ 521.556576] x21:
ffff8007ffb170b0 x20:
ffff8007ffb17000
[ 521.561877] x19:
0000000000000000 x18:
0000000000000025
[ 521.567178] x17:
0000000000000000 x16:
000000000000010ffc33ff98 x8 :
0000000000000000
[ 521.593683] x7 :
0000000000000000 x6 :
0000000000000001
[ 521.598983] x5 :
0000000000000002 x4 :
0000000000000003
[ 521.604284] x3 :
ffff8007ffb17184 x2 :
ffff8007ffb17184
[ 521.609585] x1 :
ffff000001662118 x0 :
ffff000008557be0
[ 521.614887] Process rmmod (pid: 1897, stack limit = 0x00000000859535c3)
[ 521.621490] Call trace:
[ 521.623928] nic_remove+0x24/0x88 [nicpf]
[ 521.627927] pci_device_remove+0x48/0xd8
[ 521.631847] device_release_driver_internal+0x1b0/0x248
[ 521.637062] driver_detach+0x50/0xc0
[ 521.640628] bus_remove_driver+0x60/0x100
[ 521.644627] driver_unregister+0x34/0x60
[ 521.648538] pci_unregister_driver+0x24/0xd8
[ 521.652798] nic_cleanup_module+0x14/0x111c [nicpf]
[ 521.657672] __arm64_sys_delete_module+0x150/0x218
[ 521.662460] el0_svc_handler+0x94/0x110
[ 521.666287] el0_svc+0x8/0xc
[ 521.669160] Code:
aa1e03e0 9102c295 d503201f f9404eb3 (
b9401660)
Fixes: 4863dea3fab0 ("net: Adding support for Cavium ThunderX network controller")
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yi Wang [Thu, 8 Nov 2018 08:48:36 +0000 (16:48 +0800)]
KVM: x86: fix empty-body warnings
[ Upstream commit
354cb410d87314e2eda344feea84809e4261570a ]
We get the following warnings about empty statements when building
with 'W=1':
arch/x86/kvm/lapic.c:632:53: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body]
arch/x86/kvm/lapic.c:1907:42: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body]
arch/x86/kvm/lapic.c:1936:65: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body]
arch/x86/kvm/lapic.c:1975:44: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body]
Rework the debug helper macro to get rid of these warnings.
Signed-off-by: Yi Wang <wang.yi59@zte.com.cn>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Aaro Koskinen [Sat, 24 Nov 2018 22:17:07 +0000 (00:17 +0200)]
USB: omap_udc: fix USB gadget functionality on Palm Tungsten E
[ Upstream commit
2c2322fbcab8102b8cadc09d66714700a2da42c2 ]
On Palm TE nothing happens when you try to use gadget drivers and plug
the USB cable. Fix by adding the board to the vbus sense quirk list.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Aaro Koskinen [Sat, 24 Nov 2018 22:17:06 +0000 (00:17 +0200)]
USB: omap_udc: fix omap_udc_start() on 15xx machines
[ Upstream commit
6ca6695f576b8453fe68865e84d25946d63b10ad ]
On OMAP 15xx machines there are no transceivers, and omap_udc_start()
always fails as it forgot to adjust the default return value.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Aaro Koskinen [Sat, 24 Nov 2018 22:17:05 +0000 (00:17 +0200)]
USB: omap_udc: fix crashes on probe error and module removal
[ Upstream commit
99f700366fcea1aa2fa3c49c99f371670c3c62f8 ]
We currently crash if usb_add_gadget_udc_release() fails, since the
udc->done is not initialized until in the remove function.
Furthermore, on module removal the udc data is accessed although
the release function is already triggered by usb_del_gadget_udc()
early in the function.
Fix by rewriting the release and remove functions, basically moving
all the cleanup into the release function, and doing the completion
only in the module removal case.
The patch fixes omap_udc module probe with a failing gadged, and also
allows the removal of omap_udc. Tested by running "modprobe omap_udc;
modprobe -r omap_udc" in a loop.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Aaro Koskinen [Sat, 24 Nov 2018 22:17:04 +0000 (00:17 +0200)]
USB: omap_udc: use devm_request_irq()
[ Upstream commit
286afdde1640d8ea8916a0f05e811441fbbf4b9d ]
The current code fails to release the third irq on the error path
(observed by reading the code), and we get also multiple WARNs with
failing gadget drivers due to duplicate IRQ releases. Fix by using
devm_request_irq().
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Martynas Pumputis [Fri, 23 Nov 2018 16:43:26 +0000 (17:43 +0100)]
bpf: fix check of allowed specifiers in bpf_trace_printk
[ Upstream commit
1efb6ee3edea57f57f9fb05dba8dcb3f7333f61f ]
A format string consisting of "%p" or "%s" followed by an invalid
specifier (e.g. "%p%\n" or "%s%") could pass the check which
would make format_decode (lib/vsprintf.c) to warn.
Fixes: 9c959c863f82 ("tracing: Allow BPF programs to call bpf_trace_printk()")
Reported-by: syzbot+1ec5c5ec949c4adaa0c4@syzkaller.appspotmail.com
Signed-off-by: Martynas Pumputis <m@lambda.lt>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Pan Bian [Fri, 23 Nov 2018 07:56:33 +0000 (15:56 +0800)]
exportfs: do not read dentry after free
[ Upstream commit
2084ac6c505a58f7efdec13eba633c6aaa085ca5 ]
The function dentry_connected calls dput(dentry) to drop the previously
acquired reference to dentry. In this case, dentry can be released.
After that, IS_ROOT(dentry) checks the condition
(dentry == dentry->d_parent), which may result in a use-after-free bug.
This patch directly compares dentry with its parent obtained before
dropping the reference.
Fixes: a056cc8934c("exportfs: stop retrying once we race with
rename/remove")
Signed-off-by: Pan Bian <bianpan2016@163.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Peter Ujfalusi [Wed, 14 Nov 2018 11:06:23 +0000 (13:06 +0200)]
ASoC: omap-dmic: Add pm_qos handling to avoid overruns with CPU_IDLE
[ Upstream commit
ffdcc3638c58d55a6fa68b6e5dfd4fb4109652eb ]
We need to block sleep states which would require longer time to leave than
the time the DMA must react to the DMA request in order to keep the FIFO
serviced without overrun.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Peter Ujfalusi [Wed, 14 Nov 2018 11:06:22 +0000 (13:06 +0200)]
ASoC: omap-mcpdm: Add pm_qos handling to avoid under/overruns with CPU_IDLE
[ Upstream commit
373a500e34aea97971c9d71e45edad458d3da98f ]
We need to block sleep states which would require longer time to leave than
the time the DMA must react to the DMA request in order to keep the FIFO
serviced without under of overrun.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Robbie Ko [Wed, 14 Nov 2018 18:32:37 +0000 (18:32 +0000)]
Btrfs: send, fix infinite loop due to directory rename dependencies
[ Upstream commit
a4390aee72713d9e73f1132bcdeb17d72fbbf974 ]
When doing an incremental send, due to the need of delaying directory move
(rename) operations we can end up in infinite loop at
apply_children_dir_moves().
An example scenario that triggers this problem is described below, where
directory names correspond to the numbers of their respective inodes.
Parent snapshot:
.
|--- 261/
|--- 271/
|--- 266/
|--- 259/
|--- 260/
| |--- 267
|
|--- 264/
| |--- 258/
| |--- 257/
|
|--- 265/
|--- 268/
|--- 269/
| |--- 262/
|
|--- 270/
|--- 272/
| |--- 263/
| |--- 275/
|
|--- 274/
|--- 273/
Send snapshot:
.
|-- 275/
|-- 274/
|-- 273/
|-- 262/
|-- 269/
|-- 258/
|-- 271/
|-- 268/
|-- 267/
|-- 270/
|-- 259/
| |-- 265/
|
|-- 272/
|-- 257/
|-- 260/
|-- 264/
|-- 263/
|-- 261/
|-- 266/
When processing inode 257 we delay its move (rename) operation because its
new parent in the send snapshot, inode 272, was not yet processed. Then
when processing inode 272, we delay the move operation for that inode
because inode 274 is its ancestor in the send snapshot. Finally we delay
the move operation for inode 274 when processing it because inode 275 is
its new parent in the send snapshot and was not yet moved.
When finishing processing inode 275, we start to do the move operations
that were previously delayed (at apply_children_dir_moves()), resulting in
the following iterations:
1) We issue the move operation for inode 274;
2) Because inode 262 depended on the move operation of inode 274 (it was
delayed because 274 is its ancestor in the send snapshot), we issue the
move operation for inode 262;
3) We issue the move operation for inode 272, because it was delayed by
inode 274 too (ancestor of 272 in the send snapshot);
4) We issue the move operation for inode 269 (it was delayed by 262);
5) We issue the move operation for inode 257 (it was delayed by 272);
6) We issue the move operation for inode 260 (it was delayed by 272);
7) We issue the move operation for inode 258 (it was delayed by 269);
8) We issue the move operation for inode 264 (it was delayed by 257);
9) We issue the move operation for inode 271 (it was delayed by 258);
10) We issue the move operation for inode 263 (it was delayed by 264);
11) We issue the move operation for inode 268 (it was delayed by 271);
12) We verify if we can issue the move operation for inode 270 (it was
delayed by 271). We detect a path loop in the current state, because
inode 267 needs to be moved first before we can issue the move
operation for inode 270. So we delay again the move operation for
inode 270, this time we will attempt to do it after inode 267 is
moved;
13) We issue the move operation for inode 261 (it was delayed by 263);
14) We verify if we can issue the move operation for inode 266 (it was
delayed by 263). We detect a path loop in the current state, because
inode 270 needs to be moved first before we can issue the move
operation for inode 266. So we delay again the move operation for
inode 266, this time we will attempt to do it after inode 270 is
moved (its move operation was delayed in step 12);
15) We issue the move operation for inode 267 (it was delayed by 268);
16) We verify if we can issue the move operation for inode 266 (it was
delayed by 270). We detect a path loop in the current state, because
inode 270 needs to be moved first before we can issue the move
operation for inode 266. So we delay again the move operation for
inode 266, this time we will attempt to do it after inode 270 is
moved (its move operation was delayed in step 12). So here we added
again the same delayed move operation that we added in step 14;
17) We attempt again to see if we can issue the move operation for inode
266, and as in step 16, we realize we can not due to a path loop in
the current state due to a dependency on inode 270. Again we delay
inode's 266 rename to happen after inode's 270 move operation, adding
the same dependency to the empty stack that we did in steps 14 and 16.
The next iteration will pick the same move dependency on the stack
(the only entry) and realize again there is still a path loop and then
again the same dependency to the stack, over and over, resulting in
an infinite loop.
So fix this by preventing adding the same move dependency entries to the
stack by removing each pending move record from the red black tree of
pending moves. This way the next call to get_pending_dir_moves() will
not return anything for the current parent inode.
A test case for fstests, with this reproducer, follows soon.
Signed-off-by: Robbie Ko <robbieko@synology.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
[Wrote changelog with example and more clear explanation]
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
projects / wrapfs-5.3.y.git / log