serial: ifx6x60: fix use-after-free on module unload

commit 1e948479b3d63e3ac0ecca13cbf4921c7d17c168 upstream.

Make sure to deregister the SPI driver before releasing the tty driver
to avoid use-after-free in the SPI remove callback where the tty
devices are deregistered.

Fixes: 72d4724ea54c ("serial: ifx6x60: Add modem power off function in the platform reboot process")
Cc: Jun Chen <jun.d.chen@intel.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

serial: ifx6x60: Remove dangerous spi_driver casts

commit 9a499db0325b8a8e2368f21fef66705b120f38ba upstream.

Casting spi_driver pointers to "void *" when calling
spi_{,un}register_driver() bypasses all type checking.

Remove the superfluous casts to fix this.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

serial: efm32: Fix parity management in 'efm32_uart_console_get_options()'

commit be40597a1bc173bf9dadccdf5388b956f620ae8f upstream.

UARTn_FRAME_PARITY_ODD is 0x0300
UARTn_FRAME_PARITY_EVEN is 0x0200
So if the UART is configured for EVEN parity, it would be reported as ODD.
Fix it by correctly testing if the 2 bits are set.

Fixes: 3afbd89c9639 ("serial/efm32: add new driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

usb: musb: tusb6010_omap: Do not reset the other direction's packet size

commit 6df2b42f7c040d57d9ecb67244e04e905ab87ac6 upstream.

We have one register for each EP to set the maximum packet size for both
TX and RX.
If for example an RX programming would happen before the previous TX
transfer finishes we would reset the TX packet side.

To fix this issue, only modify the TX or RX part of the register.

Fixes: 550a7375fe72 ("USB: Add MUSB and TUSB support")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Tested-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Bin Liu <b-liu@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

usb: host: xhci-plat: propagate return value of platform_get_irq()

commit 4b148d5144d64ee135b8924350cb0b3a7fd21150 upstream.

platform_get_irq() returns an error code, but the xhci-plat driver
ignores it and always returns -ENODEV. This is not correct, and
prevents -EPROBE_DEFER from being propagated properly.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

USB: xhci: fix lock-inversion problem

commit 63aea0dbab90a2461faaae357cbc8cfd6c8de9fe upstream.

With threaded interrupts, bottom-half handlers are called with
interrupts enabled.  Therefore they can't safely use spin_lock(); they
have to use spin_lock_irqsave().  Lockdep warns about a violation
occurring in xhci_irq():

=========================================================
[ INFO: possible irq lock inversion dependency detected ]
4.11.0-rc8-dbg+ #1 Not tainted
---------------------------------------------------------
swapper/7/0 just changed the state of lock:
 (&(&ehci->lock)->rlock){-.-...}, at: [<ffffffffa0130a69>]
ehci_hrtimer_func+0x29/0xc0 [ehci_hcd]
but this lock took another, HARDIRQ-unsafe lock in the past:
 (hcd_urb_list_lock){+.....}

and interrupts could create inverse lock ordering between them.

other info that might help us debug this:
 Possible interrupt unsafe locking scenario:

       CPU0                    CPU1
       ----                    ----
  lock(hcd_urb_list_lock);
                               local_irq_disable();
                               lock(&(&ehci->lock)->rlock);
                               lock(hcd_urb_list_lock);
  <Interrupt>
    lock(&(&ehci->lock)->rlock);
 *** DEADLOCK ***

no locks held by swapper/7/0.
the shortest dependencies between 2nd lock and 1st lock:
 -> (hcd_urb_list_lock){+.....} ops: 252 {
    HARDIRQ-ON-W at:
                      __lock_acquire+0x602/0x1280
                      lock_acquire+0xd5/0x1c0
                      _raw_spin_lock+0x2f/0x40
                      usb_hcd_unlink_urb_from_ep+0x1b/0x60 [usbcore]
                      xhci_giveback_urb_in_irq.isra.45+0x70/0x1b0 [xhci_hcd]
                      finish_td.constprop.60+0x1d8/0x2e0 [xhci_hcd]
                      xhci_irq+0xdd6/0x1fa0 [xhci_hcd]
                      usb_hcd_irq+0x26/0x40 [usbcore]
                      irq_forced_thread_fn+0x2f/0x70
                      irq_thread+0x149/0x1d0
                      kthread+0x113/0x150
                      ret_from_fork+0x2e/0x40

This patch fixes the problem.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-and-tested-by: Bart Van Assche <bart.vanassche@sandisk.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[bwh: Backported to 3.16: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

usb: host: xhci: simplify irq handler return

commit 76a35293b901915c5dcb4a87a4a0da8d7caf39fe upstream.

Instead of having several return points, let's use a local variable and
a single place to return. This makes the code slightly easier to read.

[set ret = IRQ_HANDLED in default working case  -Mathias]
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

usb: host: xhci-mem: allocate zeroed Scratchpad Buffer

commit 7480d912d549f414e0ce39331870899e89a5598c upstream.

According to xHCI ch4.20 Scratchpad Buffers, the Scratchpad
Buffer needs to be zeroed.

...
The following operations take place to allocate
        Scratchpad Buffers to the xHC:
...
b. Software clears the Scratchpad Buffer to '0'

Signed-off-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

xhci: apply PME_STUCK_QUIRK and MISSING_CAS quirk for Denverton

commit a0c16630d35a874e82bdf2088f58ecaca1024315 upstream.

Intel Denverton microserver is Atom based and need the PME and CAS quirks
as well.

Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

tracing/kprobes: Enforce kprobes teardown after testing

commit 30e7d894c1478c88d50ce94ddcdbd7f9763d9cdd upstream.

Enabling the tracer selftest triggers occasionally the warning in
text_poke(), which warns when the to be modified page is not marked
reserved.

The reason is that the tracer selftest installs kprobes on functions marked
__init for testing. These probes are removed after the tests, but that
removal schedules the delayed kprobes_optimizer work, which will do the
actual text poke. If the work is executed after the init text is freed,
then the warning triggers. The bug can be reproduced reliably when the work
delay is increased.

Flush the optimizer work and wait for the optimizing/unoptimizing lists to
become empty before returning from the kprobes tracer selftest. That
ensures that all operations which were queued due to the probes removal
have completed.

Link: http://lkml.kernel.org/r/20170516094802.76a468bb@gandalf.local.home
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Fixes: 6274de498 ("kprobes: Support delayed unoptimizing")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
[bwh: Backported to 3.16: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

usb: chipidea: udc: fix NULL pointer dereference if udc_start failed

commit aa1f058d7d9244423b8c5a75b9484b1115df7f02 upstream.

Fix below NULL pointer dereference. we set ci->roles[CI_ROLE_GADGET]
too early in ci_hdrc_gadget_init(), if udc_start() fails due to some
reason, the ci->roles[CI_ROLE_GADGET] check in  ci_hdrc_gadget_destroy
can't protect us.

We fix this issue by only setting ci->roles[CI_ROLE_GADGET] if
udc_start() succeed.

[    1.398550] Unable to handle kernel NULL pointer dereference at
virtual address 00000000
...
[    1.448600] PC is at dma_pool_free+0xb8/0xf0
[    1.453012] LR is at dma_pool_free+0x28/0xf0
[    2.113369] [<ffffff80081817d8>] dma_pool_free+0xb8/0xf0
[    2.118857] [<ffffff800841209c>] destroy_eps+0x4c/0x68
[    2.124165] [<ffffff8008413770>] ci_hdrc_gadget_destroy+0x28/0x50
[    2.130461] [<ffffff800840fa30>] ci_hdrc_probe+0x588/0x7e8
[    2.136129] [<ffffff8008380fb8>] platform_drv_probe+0x50/0xb8
[    2.142066] [<ffffff800837f494>] driver_probe_device+0x1fc/0x2a8
[    2.148270] [<ffffff800837f68c>] __device_attach_driver+0x9c/0xf8
[    2.154563] [<ffffff800837d570>] bus_for_each_drv+0x58/0x98
[    2.160317] [<ffffff800837f174>] __device_attach+0xc4/0x138
[    2.166072] [<ffffff800837f738>] device_initial_probe+0x10/0x18
[    2.172185] [<ffffff800837e58c>] bus_probe_device+0x94/0xa0
[    2.177940] [<ffffff800837c560>] device_add+0x3f0/0x560
[    2.183337] [<ffffff8008380d20>] platform_device_add+0x180/0x240
[    2.189541] [<ffffff800840f0e8>] ci_hdrc_add_device+0x440/0x4f8
[    2.195654] [<ffffff8008414194>] ci_hdrc_usb2_probe+0x13c/0x2d8
[    2.201769] [<ffffff8008380fb8>] platform_drv_probe+0x50/0xb8
[    2.207705] [<ffffff800837f494>] driver_probe_device+0x1fc/0x2a8
[    2.213910] [<ffffff800837f5ec>] __driver_attach+0xac/0xb0
[    2.219575] [<ffffff800837d4b0>] bus_for_each_dev+0x60/0xa0
[    2.225329] [<ffffff800837ec80>] driver_attach+0x20/0x28
[    2.230816] [<ffffff800837e880>] bus_add_driver+0x1d0/0x238
[    2.236571] [<ffffff800837fdb0>] driver_register+0x60/0xf8
[    2.242237] [<ffffff8008380ef4>] __platform_driver_register+0x44/0x50
[    2.248891] [<ffffff80086fd440>] ci_hdrc_usb2_driver_init+0x18/0x20
[    2.255365] [<ffffff8008082950>] do_one_initcall+0x38/0x128
[    2.261121] [<ffffff80086e0d00>] kernel_init_freeable+0x1ac/0x250
[    2.267414] [<ffffff800852f0b8>] kernel_init+0x10/0x100
[    2.272810] [<ffffff8008082680>] ret_from_fork+0x10/0x50

Fixes: 3f124d233e97 ("usb: chipidea: add role init and destroy APIs")
Signed-off-by: Jisheng Zhang <jszhang@marvell.com>
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

net: fix compile error in skb_orphan_partial()

commit 9142e9007f2d7ab58a587a1e1d921b0064a339aa upstream.

If CONFIG_INET is not set, net/core/sock.c can not compile :

net/core/sock.c: In function ‘skb_orphan_partial’:
net/core/sock.c:1810:2: error: implicit declaration of function
‘skb_is_tcp_pure_ack’ [-Werror=implicit-function-declaration]
  if (skb_is_tcp_pure_ack(skb))
  ^

Fix this by always including <net/tcp.h>

Fixes: f6ba8d33cfbb ("netem: fix skb_orphan_partial()")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

of: fdt: add missing allocation-failure check

commit 49e67dd17649b60b4d54966e18ec9c80198227f0 upstream.

The memory allocator passed to __unflatten_device_tree() (e.g. a wrapped
kzalloc) can fail so add the missing sanity check to avoid dereferencing
a NULL pointer.

Fixes: fe14042358fa ("of/flattree: Refactor unflatten_device_tree and add fdt_unflatten_tree")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

USB: serial: qcserial: add more Lenovo EM74xx device IDs

commit 8d7a10dd323993cc40bd37bce8bc570133b0c396 upstream.

In their infinite wisdom, and never ending quest for end user frustration,
Lenovo has decided to use new USB device IDs for the wwan modules in
their 2017 laptops.  The actual hardware is still the Sierra Wireless
EM7455 or EM7430, depending on region.

Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

mac80211: strictly check mesh address extension mode

commit 5667c86acf021e6dcf02584408b4484a273ac68f upstream.

Mesh forwarding path checks for address extension mode to fetch
appropriate proxied address and MPP address. Existing condition
that looks for 6 address format is not strict enough so that
frames with improper values are processed and invalid entries
are added into MPP table. Fix that by adding a stricter check before
processing the packet.

Per IEEE Std 802.11s-2011 spec. Table 7-6g1 lists address extension
mode 0x3 as reserved one. And also Table Table 9-13 does not specify
0x3 as valid address field.

Fixes: 9b395bc3be1c ("mac80211: verify that skb data is present")
Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
[bwh: Backported to 3.16: add mesh_flags variable in ieee80211_data_to_8023(),
 added separately upstream]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

USB: hub: fix SS max number of ports

commit 93491ced3c87c94b12220dbac0527e1356702179 upstream.

Add define for the maximum number of ports on a SuperSpeed hub as per
USB 3.1 spec Table 10-5, and use it when verifying the retrieved hub
descriptor.

This specifically avoids benign attempts to update the DeviceRemovable
mask for non-existing ports (should we get that far).

Fixes: dbe79bbe9dcb ("USB 3.0 Hub Changes")
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

USB: hub: fix non-SS hub-descriptor handling

commit bec444cd1c94c48df409a35ad4e5b143c245c3f7 upstream.

Add missing sanity check on the non-SuperSpeed hub-descriptor length in
order to avoid parsing and leaking two bytes of uninitialised slab data
through sysfs removable-attributes (or a compound-device debug
statement).

Note that we only make sure that the DeviceRemovable field is always
present (and specifically ignore the unused PortPwrCtrlMask field) in
order to continue support any hubs with non-compliant descriptors. As a
further safeguard, the descriptor buffer is also cleared.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Johan Hovold <johan@kernel.org>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

USB: hub: fix SS hub-descriptor handling

commit 2c25a2c818023df64463aac3288a9f969491e507 upstream.

A SuperSpeed hub descriptor does not have any variable-length fields so
bail out when reading a short descriptor.

This avoids parsing and leaking two bytes of uninitialised slab data
through sysfs removable-attributes.

Fixes: dbe79bbe9dcb ("USB 3.0 Hub Changes")
Cc: John Youn <John.Youn@synopsys.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

USB: usbip: fix nonconforming hub descriptor

commit ec963b412a54aac8e527708ecad06a6988a86fb4 upstream.

Fix up the root-hub descriptor to accommodate the variable-length
DeviceRemovable and PortPwrCtrlMask fields, while marking all ports as
removable (and leaving the reserved bit zero unset).

Also add a build-time constraint on VHCI_HC_PORTS which must never be
greater than USB_MAXCHILDREN (but this was only enforced through a
KConfig constant).

This specifically fixes the descriptor layout whenever VHCI_HC_PORTS is
greater than seven (default is 8).

Fixes: 04679b3489e0 ("Staging: USB/IP: add client driver")
Cc: Takahiro Hirofuchi <hirofuchi@users.sourceforge.net>
Cc: Valentina Manea <valentina.manea.m@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Acked-by: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[bwh: Backported to 3.16:
 - s/VHCI_HC_PORTS/VHCI_NPORTS/
 - Adjust filename, context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

USB: gadget: dummy_hcd: fix hub-descriptor removable fields

commit d81182ce30dbd497a1e7047d7fda2af040347790 upstream.

Flag the first and only port as removable while also leaving the
remaining bits (including the reserved bit zero) unset in accordance
with the specifications:

"Within a byte, if no port exists for a given location, the bit
field representing the port characteristics shall be 0."

Also add a comment marking the legacy PortPwrCtrlMask field.

Fixes: 1cd8fd2887e1 ("usb: gadget: dummy_hcd: add SuperSpeed support")
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: Tatyana Brokhman <tlinder@codeaurora.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[bwh: Backported to 3.16: adjust filename]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

usb: r8a66597-hcd: select a different endpoint on timeout

commit 1f873d857b6c2fefb4dada952674aa01bcfb92bd upstream.

If multiple endpoints on a single device have pending IN URBs and one
endpoint times out due to NAKs (perfectly legal), select a different
endpoint URB to try.
The existing code only checked to see another device address has pending
URBs and ignores other IN endpoints on the current device address. This
leads to endpoints never getting serviced if one endpoint is using NAK as
a flow control method.

Fixes: 5d3043586db4 ("usb: r8a66597-hcd: host controller driver for R8A6659")
Signed-off-by: Chris Brandt <chris.brandt@renesas.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

usb: r8a66597-hcd: decrease timeout

commit dd14a3e9b92ac6f0918054f9e3477438760a4fa6 upstream.

The timeout for BULK packets was 300ms which is a long time if other
endpoints or devices are waiting for their turn. Changing it to 50ms
greatly increased the overall performance for multi-endpoint devices.

Fixes: 5d3043586db4 ("usb: r8a66597-hcd: host controller driver for R8A6659")
Signed-off-by: Chris Brandt <chris.brandt@renesas.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

USB: iowarrior: fix info ioctl on big-endian hosts

commit dd5ca753fa92fb736b1395db892bd29f78e6d408 upstream.

Drop erroneous le16_to_cpu when returning the USB device speed which is
already in host byte order.

Found using sparse:

warning: cast to restricted __le16

Fixes: 946b960d13c1 ("USB: add driver for iowarrior devices.")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

uwb: fix device quirk on big-endian hosts

commit 41318a2b82f5d5fe1fb408f6d6e0b22aa557111d upstream.

Add missing endianness conversion when using the USB device-descriptor
idProduct field to apply a hardware quirk.

Fixes: 1ba47da52712 ("uwb: add the i1480 DFU driver")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

USB: core: replace %p with %pK

commit 2f964780c03b73de269b08d12aff96a9618d13f3 upstream.

Format specifier %p can leak kernel addresses while not valuing the
kptr_restrict system settings. When kptr_restrict is set to (1), kernel
pointers printed using the %pK format specifier will be replaced with
Zeros. Debugging Note : &pK prints only Zeros as address. If you need
actual address information, write 0 to kptr_restrict.

echo 0 > /proc/sys/kernel/kptr_restrict

[Found by poking around in a random vendor kernel tree, it would be nice
if someone would actually send these types of patches upstream - gkh]

Signed-off-by: Vamsi Krishna Samavedam <vskrishn@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[bwh: Backported to 3.16: drop changes in proc_reapurb*(), usbdev_do_ioctl()]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

USB: ene_usb6250: fix DMA to the stack

commit 628c2893d44876ddd11602400c70606ade62e129 upstream.

The ene_usb6250 sub-driver in usb-storage does USB I/O to buffers on
the stack, which doesn't work with vmapped stacks.  This patch fixes
the problem by allocating a separate 512-byte buffer at probe time and
using it for all of the offending I/O operations.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-and-tested-by: Andreas Hartmann <andihartmann@01019freenet.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

USB: serial: ftdi_sio: add Olimex ARM-USB-TINY(H) PIDs

commit 5f63424ab7daac840df2b12dd5bcc5b38d50f779 upstream.

This patch adds support for recognition of ARM-USB-TINY(H) devices which
are almost identical to ARM-USB-OCD(H) but lacking separate barrel jack
and serial console.

By suggestion from Johan Hovold it is possible to replace
ftdi_jtag_quirk with a bit more generic construction. Since all
Olimex-ARM debuggers has exactly two ports, we could safely always use
only second port within the debugger family.

Signed-off-by: Andrey Korolyov <andrey@xdel.ru>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

uio: fix incorrect memory leak cleanup

commit 0d83539092ddb1ab79b4d65bccb866bf07ea2ccd upstream.

Commit 75f0aef6220d ("uio: fix memory leak") has fixed up some
memory leaks during the failure paths of the addition of uio
attributes, but still is not correct entirely. A kobject_uevent()
failure still needs a kobject_put() and the kobject container
structure allocation failure before the kobject_init() doesn't
need a kobject_put(). Fix this properly.

Fixes: 75f0aef6220d ("uio: fix memory leak")
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

uio: add missing error codes

commit 0320a278b9ef80cfa44f74b7f9bb36781695f3ee upstream.

My static checker complains that "ret" could be uninitialized at the
end, which is true but it's more likely that it would be set to zero.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

tcp: eliminate negative reordering in tcp_clean_rtx_queue

commit bafbb9c73241760023d8981191ddd30bb1c6dbac upstream.

tcp_ack() can call tcp_fragment() which may dededuct the
value tp->fackets_out when MSS changes. When prior_fackets
is larger than tp->fackets_out, tcp_clean_rtx_queue() can
invoke tcp_update_reordering() with negative values. This
results in absurd tp->reodering values higher than
sysctl_tcp_max_reordering.

Note that tcp_update_reordering indeeds sets tp->reordering
to min(sysctl_tcp_max_reordering, metric), but because
the comparison is signed, a negative metric always wins.

Fixes: c7caf8d3ed7a ("[TCP]: Fix reord detection due to snd_una covered holes")
Reported-by: Rebecca Isaacs <risaacs@google.com>
Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

ahci: Acer SA5-271 SSD Not Detected Fix

commit 8bfd174312629866efa535193d9e563768ff4307 upstream.

(Correction in this resend: fixed function name acer_sa5_271_workaround; fixed
 the always-true condition in the function; fixed description.)

On the Acer Switch Alpha 12 (model number: SA5-271), the internal SSD may not
get detected because the port_map and CAP.nr_ports combination causes the driver
to skip the port that is actually connected to the SSD. More specifically,
either all SATA ports are identified as DUMMY, or all ports get ``link down''
and never get up again.

This problem occurs occasionally. When this problem occurs, CAP may hold a
value of 0xC734FF00 or 0xC734FF01 and port_map may hold a value of 0x00 or 0x01.
When this problem does not occur, CAP holds a value of 0xC734FF02 and port_map
may hold a value of 0x07. Overriding the CAP value to 0xC734FF02 and port_map to
0x7 significantly reduces the occurrence of this problem.

Link: https://bugzilla.kernel.org/attachment.cgi?id=253091
Signed-off-by: Sui Chen <suichen6@gmail.com>
Tested-by: Damian Ivanov <damianatorrpm@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
[bwh: Backported to 3.16: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

btrfs: fix incorrect error return ret being passed to mapping_set_error

commit bff5baf8aa37a97293725a16c03f49872249c07e upstream.

The setting of return code ret should be based on the error code
passed into function end_extent_writepage and not on ret. Thanks
to Liu Bo for spotting this mistake in the original fix I submitted.

Detected by CoverityScan, CID#1414312 ("Logically dead code")

Fixes: 5dca6eea91653e ("Btrfs: mark mapping with error flag to report errors to userspace")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

usb: dwc3: gadget: Prevent losing events in event cache

commit d325a1de49d61ee11aca58a529571c91ecea7879 upstream.

The dwc3 driver can overwite its previous events if its top-half IRQ
handler (TH) gets invoked again before processing the events in the
cache. We see this as a hang in the file transfer and the host will
attempt to reset the device. TH gets the event count and deasserts the
interrupt line by writing DWC3_GEVNTSIZ_INTMASK to DWC3_GEVNTSIZ. If
there's a new event coming between reading the event count and interrupt
deassertion, dwc3 will lose previous pending events. More generally, we
will see 0 event count, which should not affect anything.

This shouldn't be possible in the current dwc3 implementation. However,
through testing and reading the PCIe trace, the TH occasionally still
gets invoked one more time after HW interrupt deassertion. (With PCIe
legacy interrupts, TH is called repeatedly as long as the interrupt line
is asserted). We suspect that there is a small detection delay in the
SW.

To avoid this issue, Check DWC3_EVENT_PENDING flag to determine if the
events are processed in the bottom-half IRQ handler. If not, return
IRQ_HANDLED and don't process new event.

Signed-off-by: Thinh Nguyen <thinhn@synopsys.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
[bwh: Backported to 3.16: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

kvm: arm/arm64: Fix use after free of stage2 page table

commit 0c428a6a9256fcd66817e12db32a50b405ed2e5c upstream.

We yield the kvm->mmu_lock occassionaly while performing an operation
(e.g, unmap or permission changes) on a large area of stage2 mappings.
However this could possibly cause another thread to clear and free up
the stage2 page tables while we were waiting for regaining the lock and
thus the original thread could end up in accessing memory that was
freed. This patch fixes the problem by making sure that the stage2
pagetable is still valid after we regain the lock. The fact that
mmu_notifer->release() could be called twice (via __mmu_notifier_release
and mmu_notifier_unregsister) enhances the possibility of hitting
this race where there are two threads trying to unmap the entire guest
shadow pages.

While at it, cleanup the redudant checks around cond_resched_lock in
stage2_wp_range(), as cond_resched_lock already does the same checks.

Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: andreyknvl@google.com
Cc: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Reviewed-by: Christoffer Dall <cdall@linaro.org>
Signed-off-by: Christoffer Dall <cdall@linaro.org>
[bwh: Backported to 3.16:
 - unmap_range() is also used for hypervisor page tables, so make the check
   condition on kvm != NULL
 - s/READ_ONCE/ACCESS_ONCE/
 - Drop change to stage2_wp_range()
 - Adjust filename]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

kvm: arm/arm64: Force reading uncached stage2 PGD

commit 2952a6070e07ebdd5896f1f5b861acad677caded upstream.

Make sure we don't use a cached value of the KVM stage2 PGD while
resetting the PGD.

Cc: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Reviewed-by: Christoffer Dall <cdall@linaro.org>
Signed-off-by: Christoffer Dall <cdall@linaro.org>
[bwh: Backported to 3.16:
 - s/READ_ONCE/ACCESS_ONCE/
 - Adjust filename]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

kvm: arm/arm64: Fix race in resetting stage2 PGD

commit 6c0d706b563af732adb094c5bf807437e8963e84 upstream.

In kvm_free_stage2_pgd() we check the stage2 PGD before holding
the lock and proceed to take the lock if it is valid. And we unmap
the page tables, followed by releasing the lock. We reset the PGD
only after dropping this lock, which could cause a race condition
where another thread waiting on or even holding the lock, could
potentially see that the PGD is still valid and proceed to perform
a stage2 operation and later encounter a NULL PGD.

[223090.242280] Unable to handle kernel NULL pointer dereference at
virtual address 00000040
[223090.262330] PC is at unmap_stage2_range+0x8c/0x428
[223090.262332] LR is at kvm_unmap_hva_handler+0x2c/0x3c
[223090.262531] Call trace:
[223090.262533] [<ffff0000080adb78>] unmap_stage2_range+0x8c/0x428
[223090.262535] [<ffff0000080adf40>] kvm_unmap_hva_handler+0x2c/0x3c
[223090.262537] [<ffff0000080ace2c>] handle_hva_to_gpa+0xb0/0x104
[223090.262539] [<ffff0000080af988>] kvm_unmap_hva+0x5c/0xbc
[223090.262543] [<ffff0000080a2478>]
kvm_mmu_notifier_invalidate_page+0x50/0x8c
[223090.262547] [<ffff0000082274f8>]
__mmu_notifier_invalidate_page+0x5c/0x84
[223090.262551] [<ffff00000820b700>] try_to_unmap_one+0x1d0/0x4a0
[223090.262553] [<ffff00000820c5c8>] rmap_walk+0x1cc/0x2e0
[223090.262555] [<ffff00000820c90c>] try_to_unmap+0x74/0xa4
[223090.262557] [<ffff000008230ce4>] migrate_pages+0x31c/0x5ac
[223090.262561] [<ffff0000081f869c>] compact_zone+0x3fc/0x7ac
[223090.262563] [<ffff0000081f8ae0>] compact_zone_order+0x94/0xb0
[223090.262564] [<ffff0000081f91c0>] try_to_compact_pages+0x108/0x290
[223090.262569] [<ffff0000081d5108>] __alloc_pages_direct_compact+0x70/0x1ac
[223090.262571] [<ffff0000081d64a0>] __alloc_pages_nodemask+0x434/0x9f4
[223090.262572] [<ffff0000082256f0>] alloc_pages_vma+0x230/0x254
[223090.262574] [<ffff000008235e5c>] do_huge_pmd_anonymous_page+0x114/0x538
[223090.262576] [<ffff000008201bec>] handle_mm_fault+0xd40/0x17a4
[223090.262577] [<ffff0000081fb324>] __get_user_pages+0x12c/0x36c
[223090.262578] [<ffff0000081fb804>] get_user_pages_unlocked+0xa4/0x1b8
[223090.262579] [<ffff0000080a3ce8>] __gfn_to_pfn_memslot+0x280/0x31c
[223090.262580] [<ffff0000080a3dd0>] gfn_to_pfn_prot+0x4c/0x5c
[223090.262582] [<ffff0000080af3f8>] kvm_handle_guest_abort+0x240/0x774
[223090.262584] [<ffff0000080b2bac>] handle_exit+0x11c/0x1ac
[223090.262586] [<ffff0000080ab99c>] kvm_arch_vcpu_ioctl_run+0x31c/0x648
[223090.262587] [<ffff0000080a1d78>] kvm_vcpu_ioctl+0x378/0x768
[223090.262590] [<ffff00000825df5c>] do_vfs_ioctl+0x324/0x5a4
[223090.262591] [<ffff00000825e26c>] SyS_ioctl+0x90/0xa4
[223090.262595] [<ffff000008085d84>] el0_svc_naked+0x38/0x3c

This patch moves the stage2 PGD manipulation under the lock.

Reported-by: Alexander Graf <agraf@suse.de>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Reviewed-by: Christoffer Dall <cdall@linaro.org>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Christoffer Dall <cdall@linaro.org>
[bwh: Backported to 3.16: adjust filename, context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

dm space map disk: fix some book keeping in the disk space map

commit 0377a07c7a035e0d033cd8b29f0cb15244c0916a upstream.

When decrementing the reference count for a block, the free count wasn't
being updated if the reference count went to zero.

Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

dm thin metadata: call precommit before saving the roots

commit 91bcdb92d39711d1adb40c26b653b7978d93eb98 upstream.

These calls were the wrong way round in __write_initial_superblock.

Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

KVM: x86: Fix load damaged SSEx MXCSR register

commit a575813bfe4bc15aba511a5e91e61d242bff8b9d upstream.

Reported by syzkaller:

   BUG: unable to handle kernel paging request at ffffffffc07f6a2e
   IP: report_bug+0x94/0x120
   PGD 348e12067
   P4D 348e12067
   PUD 348e14067
   PMD 3cbd84067
   PTE 80000003f7e87161

   Oops: 0003 [#1] SMP
   CPU: 2 PID: 7091 Comm: kvm_load_guest_ Tainted: G           OE   4.11.0+ #8
   task: ffff92fdfb525400 task.stack: ffffbda6c3d04000
   RIP: 0010:report_bug+0x94/0x120
   RSP: 0018:ffffbda6c3d07b20 EFLAGS: 00010202
    do_trap+0x156/0x170
    do_error_trap+0xa3/0x170
    ? kvm_load_guest_fpu.part.175+0x12a/0x170 [kvm]
    ? mark_held_locks+0x79/0xa0
    ? retint_kernel+0x10/0x10
    ? trace_hardirqs_off_thunk+0x1a/0x1c
    do_invalid_op+0x20/0x30
    invalid_op+0x1e/0x30
   RIP: 0010:kvm_load_guest_fpu.part.175+0x12a/0x170 [kvm]
    ? kvm_load_guest_fpu.part.175+0x1c/0x170 [kvm]
    kvm_arch_vcpu_ioctl_run+0xed6/0x1b70 [kvm]
    kvm_vcpu_ioctl+0x384/0x780 [kvm]
    ? kvm_vcpu_ioctl+0x384/0x780 [kvm]
    ? sched_clock+0x13/0x20
    ? __do_page_fault+0x2a0/0x550
    do_vfs_ioctl+0xa4/0x700
    ? up_read+0x1f/0x40
    ? __do_page_fault+0x2a0/0x550
    SyS_ioctl+0x79/0x90
    entry_SYSCALL_64_fastpath+0x23/0xc2

SDM mentioned that "The MXCSR has several reserved bits, and attempting to write
a 1 to any of these bits will cause a general-protection exception(#GP) to be
generated". The syzkaller forks' testcase overrides xsave area w/ random values
and steps on the reserved bits of MXCSR register. The damaged MXCSR register
values of guest will be restored to SSEx MXCSR register before vmentry. This
patch fixes it by catching userspace override MXCSR register reserved bits w/
random values and bails out immediately.

Reported-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
[bwh: Backported to 3.16: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

USB: serial: io_ti: fix div-by-zero in set_termios

commit 6aeb75e6adfaed16e58780309613a578fe1ee90b upstream.

Fix a division-by-zero in set_termios when debugging is enabled and a
high-enough speed has been requested so that the divisor value becomes
zero.

Instead of just fixing the offending debug statement, cap the baud rate
at the base as a zero divisor value also appears to crash the firmware.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

USB: serial: mct_u232: fix big-endian baud-rate handling

commit 26cede343656c0bc2c33cdc783771282405c7fb2 upstream.

Drop erroneous cpu_to_le32 when setting the baud rate, something which
corrupted the divisor on big-endian hosts.

Found using sparse:

warning: incorrect type in argument 1 (different base types)
    expected unsigned int [unsigned] [usertype] val
    got restricted __le32 [usertype] <noident>

Fixes: af2ac1a091bc ("USB: serial mct_usb232: move DMA buffers to heap")
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-By: Pete Zaitcev <zaitcev@yahoo.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

USB: serial: ir-usb: fix big-endian baud-rate debug printk

commit ad0ccac76dcc92c3331f4c94c9fc54f8bf1ab20c upstream.

Add missing endianness conversion when printing the supported baud
rates.

Found using sparse:

warning: restricted __le16 degrades to integer

Fixes: e0d795e4f36c ("usb: irda: cleanup on ir-usb module")
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

staging: rtl8192e: rtl92e_get_eeprom_size Fix read size of EPROM_CMD.

commit 90be652c9f157d44b9c2803f902a8839796c090d upstream.

EPROM_CMD is 2 byte aligned on PCI map so calling with rtl92e_readl
will return invalid data so use rtl92e_readw.

The device is unable to select the right eeprom type.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[bwh: Backported to 3.16: use read_nic_word()]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

staging: rtl8192e: fix 2 byte alignment of register BSSIDR.

commit 867510bde14e7b7fc6dd0f50b48f6753cfbd227a upstream.

BSSIDR has two byte alignment on PCI ioremap correct the write
by swapping to 16 bits first.

This fixes a problem that the device associates fail because
the filter is not set correctly.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[bwh: Backported to 3.16: keep using write_nic_{word,dword}()]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

staging: rtl8192e: rtl92e_fill_tx_desc fix write to mapped out memory.

commit baabd567f87be05330faa5140f72a91960e7405a upstream.

The driver attempts to alter memory that is mapped to PCI device.

This is because tx_fwinfo_8190pci points to skb->data

Move the pci_map_single to when completed buffer is ready to be mapped with
psdec is empty to drop on mapping error.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

USB: serial: ftdi_sio: fix setting latency for unprivileged users

commit bb246681b3ed0967489a7401ad528c1aaa1a4c2e upstream.

Commit 557aaa7ffab6 ("ft232: support the ASYNC_LOW_LATENCY
flag") enables unprivileged users to set the FTDI latency timer,
but there was a logic flaw that skipped sending the corresponding
USB control message to the device.

Specifically, the device latency timer would not be updated until next
open, something which was later also inadvertently broken by commit
c19db4c9e49a ("USB: ftdi_sio: set device latency timeout at port
probe").

A recent commit c6dce2626606 ("USB: serial: ftdi_sio: fix extreme
low-latency setting") disabled the low-latency mode by default so we now
need this fix to allow unprivileged users to again enable it.

Signed-off-by: Anthony Mallet <anthony.mallet@laas.fr>
[johan: amend commit message]
Fixes: 557aaa7ffab6 ("ft232: support the ASYNC_LOW_LATENCY flag")
Fixes: c19db4c9e49a ("USB: ftdi_sio: set device latency timeout at port probe").
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

usb: serial: option: add Telit ME910 support

commit 40dd46048c155b8f0683f468c950a1c107f77a7c upstream.

This patch adds support for Telit ME910 PID 0x1100.

Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

PowerCap: Fix an error code in powercap_register_zone()

commit 216c4e9db4c9d1d2a382b42880442dc632cd47d9 upstream.

In the current code we accidentally return the successful result from
idr_alloc() instead of a negative error pointer.  The caller is looking
for an error pointer and so it treats the returned value as a valid
pointer.

This one might be a bit serious because if it lets people get around the
kernel's protection for remapping NULL.  I'm not sure.

Fixes: 75d2364ea0ca (PowerCap: Add class driver)
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

pid_ns: Fix race between setns'ed fork() and zap_pid_ns_processes()

commit 3fd37226216620c1a468afa999739d5016fbc349 upstream.

Imagine we have a pid namespace and a task from its parent's pid_ns,
which made setns() to the pid namespace. The task is doing fork(),
while the pid namespace's child reaper is dying. We have the race
between them:

Task from parent pid_ns             Child reaper
copy_process()                      ..
  alloc_pid()                       ..
  ..                                zap_pid_ns_processes()
  ..                                  disable_pid_allocation()
  ..                                  read_lock(&tasklist_lock)
  ..                                  iterate over pids in pid_ns
  ..                                    kill tasks linked to pids
  ..                                  read_unlock(&tasklist_lock)
  write_lock_irq(&tasklist_lock);   ..
  attach_pid(p, PIDTYPE_PID);       ..
  ..                                ..

So, just created task p won't receive SIGKILL signal,
and the pid namespace will be in contradictory state.
Only manual kill will help there, but does the userspace
care about this? I suppose, the most users just inject
a task into a pid namespace and wait a SIGCHLD from it.

The patch fixes the problem. It simply checks for
(pid_ns->nr_hashed & PIDNS_HASH_ADDING) in copy_process().
We do it under the tasklist_lock, and can't skip
PIDNS_HASH_ADDING as noted by Oleg:

"zap_pid_ns_processes() does disable_pid_allocation()
and then takes tasklist_lock to kill the whole namespace.
Given that copy_process() checks PIDNS_HASH_ADDING
under write_lock(tasklist) they can't race;
if copy_process() takes this lock first, the new child will
be killed, otherwise copy_process() can't miss
the change in ->nr_hashed."

If allocation is disabled, we just return -ENOMEM
like it's made for such cases in alloc_pid().

v2: Do not move disable_pid_allocation(), do not
introduce a new variable in copy_process() and simplify
the patch as suggested by Oleg Nesterov.
Account the problem with double irq enabling
found by Eric W. Biederman.

Fixes: c876ad768215 ("pidns: Stop pid allocation when init dies")
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
CC: Andrew Morton <akpm@linux-foundation.org>
CC: Ingo Molnar <mingo@kernel.org>
CC: Peter Zijlstra <peterz@infradead.org>
CC: Oleg Nesterov <oleg@redhat.com>
CC: Mike Rapoport <rppt@linux.vnet.ibm.com>
CC: Michal Hocko <mhocko@suse.com>
CC: Andy Lutomirski <luto@kernel.org>
CC: "Eric W. Biederman" <ebiederm@xmission.com>
CC: Andrei Vagin <avagin@openvz.org>
CC: Cyrill Gorcunov <gorcunov@openvz.org>
CC: Serge Hallyn <serge@hallyn.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
[bwh: Backported to 3.16: the proper cleanup label is bad_fork_free_pid, not
 bad_fork_cancel_cgroup]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

pid_ns: Sleep in TASK_INTERRUPTIBLE in zap_pid_ns_processes

commit b9a985db98961ae1ba0be169f19df1c567e4ffe0 upstream.

The code can potentially sleep for an indefinite amount of time in
zap_pid_ns_processes triggering the hung task timeout, and increasing
the system average.  This is undesirable.  Sleep with a task state of
TASK_INTERRUPTIBLE instead of TASK_UNINTERRUPTIBLE to remove these
undesirable side effects.

Apparently under heavy load this has been allowing Chrome to trigger
the hung time task timeout error and cause ChromeOS to reboot.

Reported-by: Vovo Yang <vovoy@google.com>
Reported-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Fixes: 6347e9009104 ("pidns: guarantee that the pidns init will be the last pidns process reaped")
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

SMB2: Fix share type handling

commit cd1230070ae1c12fd34cf6a557bfa81bf9311009 upstream.

In fs/cifs/smb2pdu.h, we have:
#define SMB2_SHARE_TYPE_DISK    0x01
#define SMB2_SHARE_TYPE_PIPE    0x02
#define SMB2_SHARE_TYPE_PRINT   0x03

Knowing that, with the current code, the SMB2_SHARE_TYPE_PRINT case can
never trigger and printer share would be interpreted as disk share.

So, test the ShareType value for equality instead.

Fixes: faaf946a7d5b ("CIFS: Add tree connect/disconnect capability for SMB2")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

net: irda: irda-usb: fix firmware name on big-endian hosts

commit 75cf067953d5ee543b3bda90bbfcbee5e1f94ae8 upstream.

Add missing endianness conversion when using the USB device-descriptor
bcdDevice field to construct a firmware file name.

Fixes: 8ef80aef118e ("[IRDA]: irda-usb.c: STIR421x cleanups")
Cc: Nick Fedchik <nfedchik@atlantic-link.com.ua>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

tcp: avoid fragmenting peculiar skbs in SACK

commit b451e5d24ba6687c6f0e7319c727a709a1846c06 upstream.

This patch fixes a bug in splitting an SKB during SACK
processing. Specifically if an skb contains multiple
packets and is only partially sacked in the higher sequences,
tcp_match_sack_to_skb() splits the skb and marks the second fragment
as SACKed.

The current code further attempts rounding up the first fragment
to MSS boundaries. But it misses a boundary condition when the
rounded-up fragment size (pkt_len) is exactly skb size.  Spliting
such an skb is pointless and causses a kernel warning and aborts
the SACK processing. This patch universally checks such over-split
before calling tcp_fragment to prevent these unnecessary warnings.

Fixes: adb92db857ee ("tcp: Make SACK code to split only at mss boundaries")
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

netem: fix skb_orphan_partial()

commit f6ba8d33cfbb46df569972e64dbb5bb7e929bfd9 upstream.

I should have known that lowering skb->truesize was dangerous :/

In case packets are not leaving the host via a standard Ethernet device,
but looped back to local sockets, bad things can happen, as reported
by Michael Madsen ( https://bugzilla.kernel.org/show_bug.cgi?id=195713 )

So instead of tweaking skb->truesize, lets change skb->destructor
and keep a reference on the owner socket via its sk_refcnt.

Fixes: f2f872f9272a ("netem: Introduce skb_orphan_partial() helper")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Michael Madsen <mkm@nabto.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
[bwh: Backported to 3.16: drop changes to the preceding comment and the
 fast path, which we don't have]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

s390/qeth: unbreak OSM and OSN support

commit 2d2ebb3ed0c6acfb014f98e427298673a5d07b82 upstream.

commit b4d72c08b358 ("qeth: bridgeport support - basic control")
broke the support for OSM and OSN devices as follows:

As OSM and OSN are L2 only, qeth_core_probe_device() does an early
setup by loading the l2 discipline and calling qeth_l2_probe_device().
In this context, adding the l2-specific bridgeport sysfs attributes
via qeth_l2_create_device_attributes() hits a BUG_ON in fs/sysfs/group.c,
since the basic sysfs infrastructure for the device hasn't been
established yet.

Note that OSN actually has its own unique sysfs attributes
(qeth_osn_devtype), so the additional attributes shouldn't be created
at all.
For OSM, add a new qeth_l2_devtype that contains all the common
and l2-specific sysfs attributes.
When qeth_core_probe_device() does early setup for OSM or OSN, assign
the corresponding devtype so that the ccwgroup probe code creates the
full set of sysfs attributes.
This allows us to skip qeth_l2_create_device_attributes() in case
of an early setup.

Any device that can't do early setup will initially have only the
generic sysfs attributes, and when it's probed later
qeth_l2_probe_device() adds the l2-specific attributes.

If an early-setup device is removed (by calling ccwgroup_ungroup()),
device_unregister() will - using the devtype - delete the
l2-specific attributes before qeth_l2_remove_device() is called.
So make sure to not remove them twice.

What complicates the issue is that qeth_l2_probe_device() and
qeth_l2_remove_device() is also called on a device when its
layer2 attribute changes (ie. its layer mode is switched).
For early-setup devices this wouldn't work properly - we wouldn't
remove the l2-specific attributes when switching to L3.
But switching the layer mode doesn't actually make any sense;
we already decided that the device can only operate in L2!
So just refuse to switch the layer mode on such devices. Note that
OSN doesn't have a layer2 attribute, so we only need to special-case
OSM.

Based on an initial patch by Ursula Braun.

Fixes: b4d72c08b358 ("qeth: bridgeport support - basic control")
Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

s390/qeth: handle sysfs error during initialization

commit 9111e7880ccf419548c7b0887df020b08eadb075 upstream.

When setting up the device from within the layer discipline's
probe routine, creating the layer-specific sysfs attributes can fail.
Report this error back to the caller, and handle it by
releasing the layer discipline.

Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
[jwi: updated commit msg, moved an OSN change to a subsequent patch]
Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

netxen_nic: set rcode to the return status from the call to netxen_issue_cmd

commit 0fe20fafd1791f993806d417048213ec57b81045 upstream.

Currently rcode is being initialized to NX_RCODE_SUCCESS and later it
is checked to see if it is not NX_RCODE_SUCCESS which is never true. It
appears that there is an unintentional missing assignment of rcode from
the return of the call to netxen_issue_cmd() that was dropped in
an earlier fix, so add it in.

Detected by CoverityScan, CID#401900 ("Logically dead code")

Fixes: 2dcd5d95ad6b2 ("netxen_nic: fix cdrp race condition")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

af_key: Fix slab-out-of-bounds in pfkey_compile_policy.

commit d90c902449a7561f1b1d58ba5a0d11728ce8b0b2 upstream.

The sadb_x_sec_len is stored in the unit 'byte divided by eight'.
So we have to multiply this value by eight before we can do
size checks. Otherwise we may get a slab-out-of-bounds when
we memcpy the user sec_ctx.

Fixes: df71837d502 ("[LSM-IPSec]: Security association restriction.")
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

iio: proximity: as3935: fix iio_trigger_poll issue

commit 9122b54f266ddee09654fe3fbc503c1a60f4a01c upstream.

Using iio_trigger_poll() can oops when multiple interrupts
happen before the first is handled.

Use iio_trigger_poll_chained() instead and use the timestamp
when processed, since it will be in theory be 2 ms max latency.

Fixes: 24ddb0e4bba4 ("iio: Add AS3935 lightning sensor support")
Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
[bwh: Backported to 3.16:
 - iio_get_time_ns() doesn't take any parameters
 - iio_trigger_poll{,_chained}() do take a time parameter]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

xfrm: fix stack access out of bounds with CONFIG_XFRM_SUB_POLICY

commit 9b3eb54106cf6acd03f07cf0ab01c13676a226c2 upstream.

When CONFIG_XFRM_SUB_POLICY=y, xfrm_dst stores a copy of the flowi for
that dst. Unfortunately, the code that allocates and fills this copy
doesn't care about what type of flowi (flowi, flowi4, flowi6) gets
passed. In multiple code paths (from raw_sendmsg, from TCP when
replying to a FIN, in vxlan, geneve, and gre), the flowi that gets
passed to xfrm is actually an on-stack flowi4, so we end up reading
stuff from the stack past the end of the flowi4 struct.

Since xfrm_dst->origin isn't used anywhere following commit
ca116922afa8 ("xfrm: Eliminate "fl" and "pol" args to
xfrm_bundle_ok()."), just get rid of it.  xfrm_dst->partner isn't used
either, so get rid of that too.

Fixes: 9d6ec938019c ("ipv4: Use flowi4 in public route lookup interfaces.")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

iio: proximity: as3935: fix AS3935_INT mask

commit 275292d3a3d62670b1b13484707b74e5239b4bb0 upstream.

AS3935 interrupt mask has been incorrect so valid lightning events
would never trigger an buffer event. Also noise interrupt should be
BIT(0).

Fixes: 24ddb0e4bba4 ("iio: Add AS3935 lightning sensor support")
Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

iio: proximity: as3935: recalibrate RCO after resume

commit 6272c0de13abf1480f701d38288f28a11b4301c4 upstream.

According to the datasheet the RCO must be recalibrated
on every power-on-reset. Also remove mutex locking in the
calibration function since callers other than the probe
function (which doesn't need it) will have a lock.

Fixes: 24ddb0e4bba4 ("iio: Add AS3935 lightning sensor support")
Cc: George McCollister <george.mccollister@gmail.com>
Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

Linux 3.16.47

net/mlx4: Fix the check in attaching steering rules

commit 6dc06c08bef1c746ff8da33dab677cfbacdcad32 upstream.

Our previous patch (cited below) introduced a regression
for RAW Eth QPs.

Fix it by checking if the QP number provided by user-space
exists, hence allowing steering rules to be added for valid
QPs only.

Fixes: 89c557687a32 ("net/mlx4_en: Avoid adding steering rules with invalid ring")
Reported-by: Or Gerlitz <gerlitz.or@gmail.com>
Signed-off-by: Talat Batheesh <talatb@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Acked-by: Or Gerlitz <ogerlitz@mellanox.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
[bwh: Backported to 3.16: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

usb: misc: legousbtower: Fix memory leak

commit 0bd193d62b4270a2a7a09da43ad1034c7ca5b3d3 upstream.

get_version_reply is not freed if function returns with success.

Fixes: 942a48730faf ("usb: misc: legousbtower: Fix buffers on stack")
Reported-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Maksim Salau <maksim.salau@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

udp: consistently apply ufo or fragmentation

commit 85f1bd9a7b5a79d5baa8bf44af19658f7bf77bfa upstream.

When iteratively building a UDP datagram with MSG_MORE and that
datagram exceeds MTU, consistently choose UFO or fragmentation.

Once skb_is_gso, always apply ufo. Conversely, once a datagram is
split across multiple skbs, do not consider ufo.

Sendpage already maintains the first invariant, only add the second.
IPv6 does not have a sendpage implementation to modify.

A gso skb must have a partial checksum, do not follow sk_no_check_tx
in udp_send_skb.

Found by syzkaller.

Fixes: e89e9cf539a2 ("[IPv4/IPv6]: UFO Scatter-gather approach")
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[bwh: Backported to 3.16:
 - ip6_append_data() doesn't take a queue parameter; use &sk->sk_write_queue
 - Adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

ipv6: Should use consistent conditional judgement for ip6 fragment between __ip6_append_data and ip6_finish_output

commit e4c5e13aa45c23692e4acf56f0b3533f328199b2 upstream.

There is an inconsistent conditional judgement between __ip6_append_data
and ip6_finish_output functions, the variable length in __ip6_append_data
just include the length of application's payload and udp6 header, don't
include the length of ipv6 header, but in ip6_finish_output use
(skb->len > ip6_skb_dst_mtu(skb)) as judgement, and skb->len include the
length of ipv6 header.

That causes some particular application's udp6 payloads whose length are
between (MTU - IPv6 Header) and MTU were fragmented by ip6_fragment even
though the rst->dev support UFO feature.

Add the length of ipv6 header to length in __ip6_append_data to keep
consistent conditional judgement as ip6_finish_output for ip6 fragment.

Signed-off-by: Zheng Li <james.z.li@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

packet: fix tp_reserve race in packet_set_ring

commit c27927e372f0785f3303e8fad94b85945e2c97b7 upstream.

Updates to tp_reserve can race with reads of the field in
packet_set_ring. Avoid this by holding the socket lock during
updates in setsockopt PACKET_RESERVE.

This bug was discovered by syzkaller.

Fixes: 8913336a7e8d ("packet: add PACKET_RESERVE sockopt")
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

mqueue: fix a use-after-free in sys_mq_notify()

commit f991af3daabaecff34684fd51fac80319d1baad1 upstream.

The retry logic for netlink_attachskb() inside sys_mq_notify()
is nasty and vulnerable:

1) The sock refcnt is already released when retry is needed
2) The fd is controllable by user-space because we already
   release the file refcnt

so we when retry but the fd has been just closed by user-space
during this small window, we end up calling netlink_detachskb()
on the error path which releases the sock again, later when
the user-space closes this socket a use-after-free could be
triggered.

Setting 'sock' to NULL here should be sufficient to fix it.

Reported-by: GeneBlue <geneblue.mail@gmail.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Manfred Spraul <manfred@colorfullife.com>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

timerfd: Protect the might cancel mechanism proper

commit 1e38da300e1e395a15048b0af1e5305bd91402f6 upstream.

The handling of the might_cancel queueing is not properly protected, so
parallel operations on the file descriptor can race with each other and
lead to list corruptions or use after free.

Protect the context for these operations with a seperate lock.

The wait queue lock cannot be reused for this because that would create a
lock inversion scenario vs. the cancel lock. Replacing might_cancel with an
atomic (atomic_t or atomic bit) does not help either because it still can
race vs. the actual list operation.

Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: "linux-fsdevel@vger.kernel.org"
Cc: syzkaller <syzkaller@googlegroups.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Link: http://lkml.kernel.org/r/alpine.DEB.2.20.1701311521430.3457@nanos
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

ipv6: avoid overflow of offset in ip6_find_1stfragopt

commit 6399f1fae4ec29fab5ec76070435555e256ca3a6 upstream.

In some cases, offset can overflow and can cause an infinite loop in
ip6_find_1stfragopt(). Make it unsigned int to prevent the overflow, and
cap it at IPV6_MAXPLEN, since packets larger than that should be invalid.

This problem has been here since before the beginning of git history.

Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

dentry name snapshots

commit 49d31c2f389acfe83417083e1208422b4091cd9e upstream.

take_dentry_name_snapshot() takes a safe snapshot of dentry name;
if the name is a short one, it gets copied into caller-supplied
structure, otherwise an extra reference to external name is grabbed
(those are never modified).  In either case the pointer to stable
string is stored into the same structure.

dentry must be held by the caller of take_dentry_name_snapshot(),
but may be freely dropped afterwards - the snapshot will stay
until destroyed by release_dentry_name_snapshot().

Intended use:
struct name_snapshot s;

take_dentry_name_snapshot(&s, dentry);
...
access s.name
...
release_dentry_name_snapshot(&s);

Replaces fsnotify_oldname_...(), gets used in fsnotify to obtain the name
to pass down with event.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
[carnil: backport 4.9: adjust context]
[bwh: Backported to 3.16:
 - External names are not ref-counted, so copy them
 - Adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

ath9k_htc: add device ID for Toshiba WLM-20U2/GN-1080

commit aea57edf80c6e96d6dc24757599396af99c02b19 upstream.

This device is available under different marketing names:
WLM-20U2 - Wireless USB Dongle for Toshiba TVs
GN-1080 - Wireless LAN Module for Toshiba MFPs.

Signed-off-by: Alexander Tsoy <alexander@tsoy.me>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

arm64: uaccess: ensure extension of access_ok() addr

commit a06040d7a791a9177581dcf7293941bd92400856 upstream.

Our access_ok() simply hands its arguments over to __range_ok(), which
implicitly assummes that the addr parameter is 64 bits wide. This isn't
necessarily true for compat code, which might pass down a 32-bit address
parameter.

In these cases, we don't have a guarantee that the address has been zero
extended to 64 bits, and the upper bits of the register may contain
unknown values, potentially resulting in a suprious failure.

Avoid this by explicitly casting the addr parameter to an unsigned long
(as is done on other architectures), ensuring that the parameter is
widened appropriately.

Fixes: 0aea86a2176c ("arm64: User access library functions")
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

arm64: ensure extension of smp_store_release value

commit 994870bead4ab19087a79492400a5478e2906196 upstream.

When an inline assembly operand's type is narrower than the register it
is allocated to, the least significant bits of the register (up to the
operand type's width) are valid, and any other bits are permitted to
contain any arbitrary value. This aligns with the AAPCS64 parameter
passing rules.

Our __smp_store_release() implementation does not account for this, and
implicitly assumes that operands have been zero-extended to the width of
the type being stored to. Thus, we may store unknown values to memory
when the value type is narrower than the pointer type (e.g. when storing
a char to a long).

This patch fixes the issue by casting the value operand to the same
width as the pointer operand in all cases, which ensures that the value
is zero-extended as we expect. We use the same union trickery as
__smp_load_acquire and {READ,WRITE}_ONCE() to avoid GCC complaining that
pointers are potentially cast to narrower width integers in unreachable
paths.

A whitespace issue at the top of __smp_store_release() is also
corrected.

No changes are necessary for __smp_load_acquire(). Load instructions
implicitly clear any upper bits of the register, and the compiler will
only consider the least significant bits of the register as valid
regardless.

Fixes: 47933ad41a86 ("arch: Introduce smp_load_acquire(), smp_store_release()")
Fixes: 878a84d5a8a1 ("arm64: add missing data types in smp_load_acquire/smp_store_release")
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
[bwh: Backported to 3.16: smp_store_release() only supports 32- and 64-bit
 types]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

net/mlx4_en: Avoid adding steering rules with invalid ring

commit 89c557687a32c294e9d25670a96e9287c09f2d5f upstream.

Inserting steering rules with illegal ring is an invalid operation,
block it.

Fixes: 820672812f82 ('net/mlx4_en: Manage flow steering rules with ethtool')
Signed-off-by: Talat Batheesh <talatb@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

net/mlx4_en: Change the error print to debug print

commit 505a9249c23988768983aaa0766ce54e0dbe037d upstream.

The error print within mlx4_en_calc_rx_buf() should be a debug print.

Fixes: 51151a16a60f ('mlx4: allow order-0 memory allocations in RX path')
Signed-off-by: Kamal Heib <kamalh@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
[bwh: Backported to 3.16: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

virtio_net: fix support for small rings

commit d85b758f72b05a774045545f24d70980e3e9aac4 upstream.

When ring size is small (<32 entries) making buffers smaller means a
full ring might not be able to hold enough buffers to fit a single large
packet.

Make sure a ring full of buffers is large enough to allow at least one
packet of max size.

Fixes: 2613af0ed18a ("virtio_net: migrate mergeable rx buffers to page frag allocators")
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
[bwh: Backported to 3.16:
 - There's no net_device::max_mtu, so always set packet_len = IP_MAX_MTU
 - Adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

x86/mm/32: Set the '__vmalloc_start_set' flag in initmem_init()

commit 861ce4a3244c21b0af64f880d5bfe5e6e2fb9e4a upstream.

'__vmalloc_start_set' currently only gets set in initmem_init() when
!CONFIG_NEED_MULTIPLE_NODES. This breaks detection of vmalloc address
with virt_addr_valid() with CONFIG_NEED_MULTIPLE_NODES=y, causing
a kernel crash:

  [mm/usercopy] 517e1fbeb6: kernel BUG at arch/x86/mm/physaddr.c:78!

Set '__vmalloc_start_set' appropriately for that case as well.

Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Laura Abbott <labbott@redhat.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: dc16ecf7fd1f ("x86-32: use specific __vmalloc_start_set flag in __virt_addr_valid")
Link: http://lkml.kernel.org/r/1494278596-30373-1-git-send-email-labbott@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

fs/xattr.c: zero out memory copied to userspace in getxattr

commit 81be3dee96346fbe08c31be5ef74f03f6b63cf68 upstream.

getxattr uses vmalloc to allocate memory if kzalloc fails.  This is
filled by vfs_getxattr and then copied to the userspace.  vmalloc,
however, doesn't zero out the memory so if the specific implementation
of the xattr handler is sloppy we can theoretically expose a kernel
memory.  There is no real sign this is really the case but let's make
sure this will not happen and use vzalloc instead.

Fixes: 779302e67835 ("fs/xattr.c:getxattr(): improve handling of allocation failures")
Link: http://lkml.kernel.org/r/20170306103327.2766-1-mhocko@kernel.org
Acked-by: Kees Cook <keescook@chromium.org>
Reported-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
[bwh: Backported to 3.16: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

target/fileio: Fix zero-length READ and WRITE handling

commit 59ac9c078141b8fd0186c0b18660a1b2c24e724e upstream.

This patch fixes zero-length READ and WRITE handling in target/FILEIO,
which was broken a long time back by:

Since:

  commit d81cb44726f050d7cf1be4afd9cb45d153b52066
  Author: Paolo Bonzini <pbonzini@redhat.com>
  Date:   Mon Sep 17 16:36:11 2012 -0700

      target: go through normal processing for all zero-length commands

which moved zero-length READ and WRITE completion out of target-core,
to doing submission into backend driver code.

To address this, go ahead and invoke target_complete_cmd() for any
non negative return value in fd_do_rw().

Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Andy Grover <agrover@redhat.com>
Cc: David Disseldorp <ddiss@suse.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

fbdev: sti: don't select CONFIG_VT

commit 34bf129a7f068e3108dbb051b4b05674e2a270e7 upstream.

While working on another build error, I ran into several variations of
this dependency loop:

subsection "Kconfig recursive dependency limitations"
drivers/input/Kconfig:8: symbol INPUT is selected by VT
For a resolution refer to Documentation/kbuild/kconfig-language.txt
subsection "Kconfig recursive dependency limitations"
drivers/tty/Kconfig:12: symbol VT is selected by FB_STI
For a resolution refer to Documentation/kbuild/kconfig-language.txt
subsection "Kconfig recursive dependency limitations"
drivers/video/fbdev/Kconfig:677: symbol FB_STI depends on FB
For a resolution refer to Documentation/kbuild/kconfig-language.txt
subsection "Kconfig recursive dependency limitations"
drivers/video/fbdev/Kconfig:5: symbol FB is selected by DRM_KMS_FB_HELPER
For a resolution refer to Documentation/kbuild/kconfig-language.txt
subsection "Kconfig recursive dependency limitations"
drivers/gpu/drm/Kconfig:72: symbol DRM_KMS_FB_HELPER is selected by DRM_KMS_CMA_HELPER
For a resolution refer to Documentation/kbuild/kconfig-language.txt
subsection "Kconfig recursive dependency limitations"
drivers/gpu/drm/Kconfig:137: symbol DRM_KMS_CMA_HELPER is selected by DRM_HDLCD
For a resolution refer to Documentation/kbuild/kconfig-language.txt
subsection "Kconfig recursive dependency limitations"
drivers/gpu/drm/arm/Kconfig:6: symbol DRM_HDLCD depends on OF
For a resolution refer to Documentation/kbuild/kconfig-language.txt
subsection "Kconfig recursive dependency limitations"
drivers/of/Kconfig:4: symbol OF is selected by X86_INTEL_CE
For a resolution refer to Documentation/kbuild/kconfig-language.txt
subsection "Kconfig recursive dependency limitations"
arch/x86/Kconfig:523: symbol X86_INTEL_CE depends on X86_IO_APIC
For a resolution refer to Documentation/kbuild/kconfig-language.txt
subsection "Kconfig recursive dependency limitations"
arch/x86/Kconfig:1011: symbol X86_IO_APIC depends on X86_LOCAL_APIC
For a resolution refer to Documentation/kbuild/kconfig-language.txt
subsection "Kconfig recursive dependency limitations"
arch/x86/Kconfig:1005: symbol X86_LOCAL_APIC depends on X86_UP_APIC
For a resolution refer to Documentation/kbuild/kconfig-language.txt
subsection "Kconfig recursive dependency limitations"
arch/x86/Kconfig:980: symbol X86_UP_APIC depends on PCI_MSI
For a resolution refer to Documentation/kbuild/kconfig-language.txt
subsection "Kconfig recursive dependency limitations"
drivers/pci/Kconfig:11: symbol PCI_MSI is selected by AMD_IOMMU
For a resolution refer to Documentation/kbuild/kconfig-language.txt
subsection "Kconfig recursive dependency limitations"
drivers/iommu/Kconfig:106: symbol AMD_IOMMU depends on IOMMU_SUPPORT
For a resolution refer to Documentation/kbuild/kconfig-language.txt
subsection "Kconfig recursive dependency limitations"
drivers/iommu/Kconfig:5: symbol IOMMU_SUPPORT is selected by DRM_ETNAVIV
For a resolution refer to Documentation/kbuild/kconfig-language.txt
subsection "Kconfig recursive dependency limitations"
drivers/gpu/drm/etnaviv/Kconfig:2: symbol DRM_ETNAVIV depends on THERMAL
For a resolution refer to Documentation/kbuild/kconfig-language.txt
subsection "Kconfig recursive dependency limitations"
drivers/thermal/Kconfig:5: symbol THERMAL is selected by ACPI_VIDEO
For a resolution refer to Documentation/kbuild/kconfig-language.txt
subsection "Kconfig recursive dependency limitations"
drivers/acpi/Kconfig:183: symbol ACPI_VIDEO is selected by INPUT

This doesn't currently show up as I fixed the 'THERMAL' part of it,
but I noticed that the FB_STI dependency should not be there but
was introduced by slightly incorrect bug-fix patch that tried to
fix a link error.

Instead of selecting 'VT' to make us enter the drivers/video/console
directory at compile-time, it's sufficient to build the
drivers/video/console/sticore.c file by adding its directory
to when CONFIG_FB_STI is enabled. Alternatively, we could move the
sticore code to another directory that is always built when we
have at STI_CONSOLE or FB_STI enabled.

Fixes: 17085a934592 ("parisc: stifb: should depend on STI_CONSOLE")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Helge Deller <deller@gmx.de>
Cc: "James E.J. Bottomley" <jejb@parisc-linux.org>
Cc: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

of: fix sparse warning in of_pci_range_parser_one

commit eb3100365791b06242b8bb5c3c2854ba41dabfbc upstream.

sparse gives the following warning for 'pci_space':

../drivers/of/address.c:266:26: warning: incorrect type in assignment (different base types)
../drivers/of/address.c:266:26:    expected unsigned int [unsigned] [usertype] pci_space
../drivers/of/address.c:266:26:    got restricted __be32 const [usertype] <noident>

It appears that pci_space is only ever accessed on powerpc, so the endian
swap is often not needed.

Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

ceph: fix memory leak in __ceph_setxattr()

commit eeca958dce0a9231d1969f86196653eb50fcc9b3 upstream.

The ceph_inode_xattr needs to be released when removing an xattr.  Easily
reproducible running the 'generic/020' test from xfstests or simply by
doing:

  attr -s attr0 -V 0 /mnt/test && attr -r attr0 /mnt/test

While there, also fix the error path.

Here's the kmemleak splat:

unreferenced object 0xffff88001f86fbc0 (size 64):
  comm "attr", pid 244, jiffies 4294904246 (age 98.464s)
  hex dump (first 32 bytes):
    40 fa 86 1f 00 88 ff ff 80 32 38 1f 00 88 ff ff  @........28.....
    00 01 00 00 00 00 ad de 00 02 00 00 00 00 ad de  ................
  backtrace:
    [<ffffffff81560199>] kmemleak_alloc+0x49/0xa0
    [<ffffffff810f3e5b>] kmem_cache_alloc+0x9b/0xf0
    [<ffffffff812b157e>] __ceph_setxattr+0x17e/0x820
    [<ffffffff812b1c57>] ceph_set_xattr_handler+0x37/0x40
    [<ffffffff8111fb4b>] __vfs_removexattr+0x4b/0x60
    [<ffffffff8111fd37>] vfs_removexattr+0x77/0xd0
    [<ffffffff8111fdd1>] removexattr+0x41/0x60
    [<ffffffff8111fe65>] path_removexattr+0x75/0xa0
    [<ffffffff81120aeb>] SyS_lremovexattr+0xb/0x10
    [<ffffffff81564b20>] entry_SYSCALL_64_fastpath+0x13/0x94
    [<ffffffffffffffff>] 0xffffffffffffffff

Signed-off-by: Luis Henriques <lhenriques@suse.com>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

SMB3: Work around mount failure when using SMB3 dialect to Macs

commit 7db0a6efdc3e990cdfd4b24820d010e9eb7890ad upstream.

Macs send the maximum buffer size in response on ioctl to validate
negotiate security information, which causes us to fail the mount
as the response buffer is larger than the expected response.

Changed ioctl response processing to allow for padding of validate
negotiate ioctl response and limit the maximum response size to
maximum buffer size.

Signed-off-by: Steve French <steve.french@primarydata.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

lockdep: teach lockdep about memalloc_noio_save

commit 6d7225f0cc1a1fc32cf5dd01b4ab4b8a34c7cdb4 upstream.

Patch series "scope GFP_NOFS api", v5.

This patch (of 7):

Commit 21caf2fc1931 ("mm: teach mm by current context info to not do I/O
during memory allocation") added the memalloc_noio_(save|restore)
functions to enable people to modify the MM behavior by disabling I/O
during memory allocation.

This was further extended in commit 934f3072c17c ("mm: clear __GFP_FS
when PF_MEMALLOC_NOIO is set").

memalloc_noio_* functions prevent allocation paths recursing back into
the filesystem without explicitly changing the flags for every
allocation site.

However, lockdep hasn't been keeping up with the changes and it entirely
misses handling the memalloc_noio adjustments.  Instead, it is left to
the callers of __lockdep_trace_alloc to call the function after they
have shaven the respective GFP flags which can lead to false positives:

  =================================
   [ INFO: inconsistent lock state ]
   4.10.0-nbor #134 Not tainted
   ---------------------------------
   inconsistent {IN-RECLAIM_FS-W} -> {RECLAIM_FS-ON-W} usage.
   fsstress/3365 [HC0[0]:SC0[0]:HE1:SE1] takes:
    (&xfs_nondir_ilock_class){++++?.}, at: xfs_ilock+0x141/0x230
   {IN-RECLAIM_FS-W} state was registered at:
     __lock_acquire+0x62a/0x17c0
     lock_acquire+0xc5/0x220
     down_write_nested+0x4f/0x90
     xfs_ilock+0x141/0x230
     xfs_reclaim_inode+0x12a/0x320
     xfs_reclaim_inodes_ag+0x2c8/0x4e0
     xfs_reclaim_inodes_nr+0x33/0x40
     xfs_fs_free_cached_objects+0x19/0x20
     super_cache_scan+0x191/0x1a0
     shrink_slab+0x26f/0x5f0
     shrink_node+0xf9/0x2f0
     kswapd+0x356/0x920
     kthread+0x10c/0x140
     ret_from_fork+0x31/0x40
   irq event stamp: 173777
   hardirqs last  enabled at (173777): __local_bh_enable_ip+0x70/0xc0
   hardirqs last disabled at (173775): __local_bh_enable_ip+0x37/0xc0
   softirqs last  enabled at (173776): _xfs_buf_find+0x67a/0xb70
   softirqs last disabled at (173774): _xfs_buf_find+0x5db/0xb70

   other info that might help us debug this:
    Possible unsafe locking scenario:

          CPU0
          ----
     lock(&xfs_nondir_ilock_class);
     <Interrupt>
       lock(&xfs_nondir_ilock_class);

    *** DEADLOCK ***

   4 locks held by fsstress/3365:
    #0:  (sb_writers#10){++++++}, at: mnt_want_write+0x24/0x50
    #1:  (&sb->s_type->i_mutex_key#12){++++++}, at: vfs_setxattr+0x6f/0xb0
    #2:  (sb_internal#2){++++++}, at: xfs_trans_alloc+0xfc/0x140
    #3:  (&xfs_nondir_ilock_class){++++?.}, at: xfs_ilock+0x141/0x230

   stack backtrace:
   CPU: 0 PID: 3365 Comm: fsstress Not tainted 4.10.0-nbor #134
   Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014
   Call Trace:
    kmem_cache_alloc_node_trace+0x3a/0x2c0
    vm_map_ram+0x2a1/0x510
    _xfs_buf_map_pages+0x77/0x140
    xfs_buf_get_map+0x185/0x2a0
    xfs_attr_rmtval_set+0x233/0x430
    xfs_attr_leaf_addname+0x2d2/0x500
    xfs_attr_set+0x214/0x420
    xfs_xattr_set+0x59/0xb0
    __vfs_setxattr+0x76/0xa0
    __vfs_setxattr_noperm+0x5e/0xf0
    vfs_setxattr+0xae/0xb0
    setxattr+0x15e/0x1a0
    path_setxattr+0x8f/0xc0
    SyS_lsetxattr+0x11/0x20
    entry_SYSCALL_64_fastpath+0x23/0xc6

Let's fix this by making lockdep explicitly do the shaving of respective
GFP flags.

Fixes: 934f3072c17c ("mm: clear __GFP_FS when PF_MEMALLOC_NOIO is set")
Link: http://lkml.kernel.org/r/20170306131408.9828-2-mhocko@kernel.org
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Michal Hocko <mhocko@suse.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Chris Mason <clm@fb.com>
Cc: David Sterba <dsterba@suse.cz>
Cc: Jan Kara <jack@suse.cz>
Cc: Brian Foster <bfoster@redhat.com>
Cc: Darrick J. Wong <darrick.wong@oracle.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
[bwh: Backported to 3.16: no need to touch #includes]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

um: Fix PTRACE_POKEUSER on x86_64

commit 9abc74a22d85ab29cef9896a2582a530da7e79bf upstream.

This is broken since ever but sadly nobody noticed.
Recent versions of GDB set DR_CONTROL unconditionally and
UML dies due to a heap corruption. It turns out that
the PTRACE_POKEUSER was copy&pasted from i386 and assumes
that addresses are 4 bytes long.

Fix that by using 8 as address size in the calculation.

Reported-by: jie cao <cj3054@gmail.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

CIFS: fix oplock break deadlocks

commit 3998e6b87d4258a70df358296d6f1c7234012bfe upstream.

When the final cifsFileInfo_put() is called from cifsiod and an oplock
break work is queued, lockdep complains loudly:

 =============================================
 [ INFO: possible recursive locking detected ]
 4.11.0+ #21 Not tainted
 ---------------------------------------------
 kworker/0:2/78 is trying to acquire lock:
  ("cifsiod"){++++.+}, at: flush_work+0x215/0x350

 but task is already holding lock:
  ("cifsiod"){++++.+}, at: process_one_work+0x255/0x8e0

 other info that might help us debug this:
  Possible unsafe locking scenario:

        CPU0
        ----
   lock("cifsiod");
   lock("cifsiod");

  *** DEADLOCK ***

  May be due to missing lock nesting notation

 2 locks held by kworker/0:2/78:
  #0:  ("cifsiod"){++++.+}, at: process_one_work+0x255/0x8e0
  #1:  ((&wdata->work)){+.+...}, at: process_one_work+0x255/0x8e0

 stack backtrace:
 CPU: 0 PID: 78 Comm: kworker/0:2 Not tainted 4.11.0+ #21
 Workqueue: cifsiod cifs_writev_complete
 Call Trace:
  dump_stack+0x85/0xc2
  __lock_acquire+0x17dd/0x2260
  ? match_held_lock+0x20/0x2b0
  ? trace_hardirqs_off_caller+0x86/0x130
  ? mark_lock+0xa6/0x920
  lock_acquire+0xcc/0x260
  ? lock_acquire+0xcc/0x260
  ? flush_work+0x215/0x350
  flush_work+0x236/0x350
  ? flush_work+0x215/0x350
  ? destroy_worker+0x170/0x170
  __cancel_work_timer+0x17d/0x210
  ? ___preempt_schedule+0x16/0x18
  cancel_work_sync+0x10/0x20
  cifsFileInfo_put+0x338/0x7f0
  cifs_writedata_release+0x2a/0x40
  ? cifs_writedata_release+0x2a/0x40
  cifs_writev_complete+0x29d/0x850
  ? preempt_count_sub+0x18/0xd0
  process_one_work+0x304/0x8e0
  worker_thread+0x9b/0x6a0
  kthread+0x1b2/0x200
  ? process_one_work+0x8e0/0x8e0
  ? kthread_create_on_node+0x40/0x40
  ret_from_fork+0x31/0x40

This is a real warning.  Since the oplock is queued on the same
workqueue this can deadlock if there is only one worker thread active
for the workqueue (which will be the case during memory pressure when
the rescuer thread is handling it).

Furthermore, there is at least one other kind of hang possible due to
the oplock break handling if there is only worker.  (This can be
reproduced without introducing memory pressure by having passing 1 for
the max_active parameter of cifsiod.) cifs_oplock_break() can wait
indefintely in the filemap_fdatawait() while the cifs_writev_complete()
work is blocked:

 sysrq: SysRq : Show Blocked State
   task                        PC stack   pid father
 kworker/0:1     D    0    16      2 0x00000000
 Workqueue: cifsiod cifs_oplock_break
 Call Trace:
  __schedule+0x562/0xf40
  ? mark_held_locks+0x4a/0xb0
  schedule+0x57/0xe0
  io_schedule+0x21/0x50
  wait_on_page_bit+0x143/0x190
  ? add_to_page_cache_lru+0x150/0x150
  __filemap_fdatawait_range+0x134/0x190
  ? do_writepages+0x51/0x70
  filemap_fdatawait_range+0x14/0x30
  filemap_fdatawait+0x3b/0x40
  cifs_oplock_break+0x651/0x710
  ? preempt_count_sub+0x18/0xd0
  process_one_work+0x304/0x8e0
  worker_thread+0x9b/0x6a0
  kthread+0x1b2/0x200
  ? process_one_work+0x8e0/0x8e0
  ? kthread_create_on_node+0x40/0x40
  ret_from_fork+0x31/0x40
 dd              D    0   683    171 0x00000000
 Call Trace:
  __schedule+0x562/0xf40
  ? mark_held_locks+0x29/0xb0
  schedule+0x57/0xe0
  io_schedule+0x21/0x50
  wait_on_page_bit+0x143/0x190
  ? add_to_page_cache_lru+0x150/0x150
  __filemap_fdatawait_range+0x134/0x190
  ? do_writepages+0x51/0x70
  filemap_fdatawait_range+0x14/0x30
  filemap_fdatawait+0x3b/0x40
  filemap_write_and_wait+0x4e/0x70
  cifs_flush+0x6a/0xb0
  filp_close+0x52/0xa0
  __close_fd+0xdc/0x150
  SyS_close+0x33/0x60
  entry_SYSCALL_64_fastpath+0x1f/0xbe

 Showing all locks held in the system:
 2 locks held by kworker/0:1/16:
  #0:  ("cifsiod"){.+.+.+}, at: process_one_work+0x255/0x8e0
  #1:  ((&cfile->oplock_break)){+.+.+.}, at: process_one_work+0x255/0x8e0

 Showing busy workqueues and worker pools:
 workqueue cifsiod: flags=0xc
   pwq 0: cpus=0 node=0 flags=0x0 nice=0 active=1/1
     in-flight: 16:cifs_oplock_break
     delayed: cifs_writev_complete, cifs_echo_request
 pool 0: cpus=0 node=0 flags=0x0 nice=0 hung=0s workers=3 idle: 750 3

Fix these problems by creating a a new workqueue (with a rescuer) for
the oplock break work.

Signed-off-by: Rabin Vincent <rabinv@axis.com>
Signed-off-by: Steve French <smfrench@gmail.com>
[bwh: Backported to 3.16: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

tg3: don't clear stats while tg3_close

commit 37a7fdf2892be124545ddaf99b85de576121476c upstream.

Now tg3 NIC's stats will be cleared after ifdown/ifup. bond_get_stats traverse
its salves to get statistics,cumulative the increment.If a tg3 NIC is added to
bonding as a slave,ifdown/ifup will cause bonding's stats become tremendous value
(ex.1638.3 PiB) because of negative increment.

Fixes: 92feeabf3f67 ("tg3: Save stats across chip resets")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

metag/uaccess: Check access_ok in strncpy_from_user

commit 3a158a62da0673db918b53ac1440845a5b64fd90 upstream.

The metag implementation of strncpy_from_user() doesn't validate the src
pointer, which could allow reading of arbitrary kernel memory. Add a
short access_ok() check to prevent that.

Its still possible for it to read across the user/kernel boundary, but
it will invariably reach a NUL character after only 9 bytes, leaking
only a static kernel address being loaded into D0Re0 at the beginning of
__start, which is acceptable for the immediate fix.

Reported-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: linux-metag@vger.kernel.org
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

Set unicode flag on cifs echo request to avoid Mac error

commit 26c9cb668c7fbf9830516b75d8bee70b699ed449 upstream.

Mac requires the unicode flag to be set for cifs, even for the smb
echo request (which doesn't have strings).

Without this Mac rejects the periodic echo requests (when mounting
with cifs) that we use to check if server is down

Signed-off-by: Steve French <smfrench@gmail.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

cifs: small underflow in cnvrtDosUnixTm()

commit 564277eceeca01e02b1ef3e141cfb939184601b4 upstream.

January is month 1.  There is no zero-th month.  If someone passes a
zero month then it means we read from one space before the start of the
total_days_of_prev_months[] array.

We may as well also be strict about days as well.

Fixes: 1bd5bbcb6531 ("[CIFS] Legacy time handling for Win9x and OS/2 part 1")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

tcp: fix wraparound issue in tcp_lp

commit a9f11f963a546fea9144f6a6d1a307e814a387e7 upstream.

Be careful when comparing tcp_time_stamp to some u32 quantity,
otherwise result can be surprising.

Fixes: 7c106d7e782b ("[TCP]: TCP Low Priority congestion control")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
[bwh: Backported to 3.16: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

metag/uaccess: Fix access_ok()

commit 8a8b56638bcac4e64cccc88bf95a0f9f4b19a2fb upstream.

The __user_bad() macro used by access_ok() has a few corner cases
noticed by Al Viro where it doesn't behave correctly:

 - The kernel range check has off by 1 errors which permit access to the
   first and last byte of the kernel mapped range.

 - The kernel range check ends at LINCORE_BASE rather than
   META_MEMORY_LIMIT, which is ineffective when the kernel is in global
   space (an extremely uncommon configuration).

There are a couple of other shortcomings here too:

 - Access to the whole of the other address space is permitted (i.e. the
   global half of the address space when the kernel is in local space).
   This isn't ideal as it could theoretically still contain privileged
   mappings set up by the bootloader.

 - The size argument is unused, permitting user copies which start on
   valid pages at the end of the user address range and cross the
   boundary into the kernel address space (e.g. addr = 0x3ffffff0, size
   > 0x10).

It isn't very convenient to add size checks when disallowing certain
regions, and it seems far safer to be sure and explicit about what
userland is able to access, so invert the logic to allow certain regions
instead, and fix the off by 1 errors and missing size checks. This also
allows the get_fs() == KERNEL_DS check to be more easily optimised into
the user address range case.

We now have 3 such allowed regions:

 - The user address range (incorporating the get_fs() == KERNEL_DS
   check).

 - NULL (some kernel code expects this to work, and we'll always catch
   the fault anyway).

 - The core code memory region.

Fixes: 373cd784d0fc ("metag: Memory handling")
Reported-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: linux-metag@vger.kernel.org
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

powerpc/eeh: Avoid use after free in eeh_handle_special_event()

commit daeba2956f32f91f3493788ff6ee02fb1b2f02fa upstream.

eeh_handle_special_event() is called when an EEH event is detected but
can't be narrowed down to a specific PE.  This function looks through
every PE to find one in an erroneous state, then calls the regular event
handler eeh_handle_normal_event() once it knows which PE has an error.

However, if eeh_handle_normal_event() found that the PE cannot possibly
be recovered, it will free it, rendering the passed PE stale.
This leads to a use after free in eeh_handle_special_event() as it attempts to
clear the "recovering" state on the PE after eeh_handle_normal_event() returns.

Thus, make sure the PE is valid when attempting to clear state in
eeh_handle_special_event().

Fixes: 8a6b1bc70dbb ("powerpc/eeh: EEH core to handle special event")
Reported-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Russell Currey <ruscur@russell.cc>
Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
[bwh: Backported to 3.16: adjust context, indentation]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

drm/edid: Add 10 bpc quirk for LGD 764 panel in HP zBook 17 G2

commit e345da82bd6bdfa8492f80b3ce4370acfd868d95 upstream.

The builtin eDP panel in the HP zBook 17 G2 supports 10 bpc,
as advertised by the Laptops product specs and verified via
injecting a fixed edid + photometer measurements, but edid
reports unknown depth, so drivers fall back to 6 bpc.

Add a quirk to get the full 10 bpc.

Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1492787108-23959-1-git-send-email-mario.kleiner.de@gmail.com
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

arm64: KVM: Fix decoding of Rt/Rt2 when trapping AArch32 CP accesses

commit c667186f1c01ca8970c785888868b7ffd74e51ee upstream.

Our 32bit CP14/15 handling inherited some of the ARMv7 code for handling
the trapped system registers, completely missing the fact that the
fields for Rt and Rt2 are now 5 bit wide, and not 4...

Let's fix it, and provide an accessor for the most common Rt case.

Reviewed-by: Christoffer Dall <cdall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <cdall@linaro.org>
[bwh: Backported to 3.16:
 - Use literal numbers in kvm_vcpu_sys_get_rt()
 - Adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

dm bufio: avoid a possible ABBA deadlock

commit 1b0fb5a5b2dc0dddcfa575060441a7176ba7ac37 upstream.

__get_memory_limit() tests if dm_bufio_cache_size changed and calls
__cache_size_refresh() if it did.  It takes dm_bufio_clients_lock while
it already holds the client lock.  However, lock ordering is violated
because in cleanup_old_buffers() dm_bufio_clients_lock is taken before
the client lock.

This results in a possible deadlock and lockdep engine warning.

Fix this deadlock by changing mutex_lock() to mutex_trylock().  If the
lock can't be taken, it will be re-checked next time when a new buffer
is allocated.

Also add "unlikely" to the if condition, so that the optimizer assumes
that the condition is false.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

ipv6: Need to export ipv6_push_frag_opts for tunneling now.

commit 5b8481fa42ac58484d633b558579e302aead64c1 upstream.

Since that change also made the nfrag function not necessary
for exports, remove it.

Fixes: 89a23c8b528b ("ip6_tunnel: Fix missing tunnel encapsulation limit option")
Signed-off-by: David S. Miller <davem@davemloft.net>
[bwh: Backported to 3.16: keep exporting ipv6_push_nfrag_opts(), needed by
 ip6_gre module]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

ip6_tunnel: Fix missing tunnel encapsulation limit option

commit 89a23c8b528bd2c89f3981573d6cd7d23840c8a6 upstream.

The IPv6 tunneling code tries to insert IPV6_TLV_TNL_ENCAP_LIMIT and
IPV6_TLV_PADN options when an encapsulation limit is defined (the
default is a limit of 4).  An MTU adjustment is done to account for
these options as well.  However, the options are never present in the
generated packets.

The issue appears to be a subtlety between IPV6_DSTOPTS and
IPV6_RTHDRDSTOPTS defined in RFC 3542.  When the IPIP tunnel driver was
written, the encap limit options were included as IPV6_RTHDRDSTOPTS in
dst0opt of struct ipv6_txoptions.  Later, ipv6_push_nfrags_opts was
(correctly) updated to require IPV6_RTHDR options when IPV6_RTHDRDSTOPTS
are to be used.  This caused the options to no longer be included in v6
encapsulated packets.

The fix is to use IPV6_DSTOPTS (in dst1opt of struct ipv6_txoptions)
instead.  IPV6_DSTOPTS do not have the additional IPV6_RTHDR requirement.

Fixes: 1df64a8569c7: ("[IPV6]: Add ip6ip6 tunnel driver.")
Fixes: 333fad5364d6: ("[IPV6]: Support several new sockopt / ancillary data in Advanced API (RFC3542)")
Signed-off-by: Craig Gallek <kraig@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
[bwh: Backported to 3.16: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>