git.fsl.cs.sunysb.edu Git - wrapfs-5.3.y.git/log

qmi_wwan: add Sierra Wireless MC74xx/EM74xx

commit 0db65fcfcded76fe4f74e3ca9f4e2baf67b683ef upstream.

New device IDs shamelessly lifted from the vendor driver.

Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

qmi_wwan: Add support for Dell Wireless 5809e 4G Modem

commit 2070c48cf2b78af89ba529c00992eaaa18df8ef7 upstream.

Added the USB IDs 0x413c:0x81b1 for the "Dell Wireless 5809e Gobi(TM) 4G
LTE Mobile Broadband Card", a Dell-branded Sierra Wireless EM7305 LTE
card in M.2 form factor, used eg. in Dell's Latitude E7540 Notebook
series.

Signed-off-by: Pieter Hollants <pieter@hollants.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
[bwh: Backported to 3.16: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

qmi_wwan: add the second QMI/network interface for Sierra Wireless MC7305/MC7355

commit e3426ca7bc2957ee072f61360c2b81b4adb629ad upstream.

Sierra Wireless MC7305/MC7355 with USB ID 1199:9041 also provide a
second QMI/network interface like the MC73xx with USB ID 1199:68c0 on
USB interface #10 when used in the appropriate USB configuration.
Add the corresponding QMI_FIXED_INTF entry to the qmi_wwan driver.

Please note that the second QMI/network interface is not working for
early MC73xx firmware versions like 01.08.x as the device does not
respond to QMI messages on the second /dev/cdc-wdm port.

Signed-off-by: Reinhard Speyerer <rspmn@arcor.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

sctp: lack the check for ports in sctp_v6_cmp_addr

[ Upstream commit 40b4f0fd74e46c017814618d67ec9127ff20f157 ]

As the member .cmp_addr of sctp_af_inet6, sctp_v6_cmp_addr should also check
the port of addresses, just like sctp_v4_cmp_addr, cause it's invoked by
sctp_cmp_addr_exact().

Now sctp_v6_cmp_addr just check the port when two addresses have different
family, and lack the port check for two ipv6 addresses. that will make
sctp_hash_cmp() cannot work well.

so fix it by adding ports comparison in sctp_v6_cmp_addr().

Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

net: jme: fix suspend/resume on JMC260

[ Upstream commit ee50c130c82175eaa0820c96b6d3763928af2241 ]

The JMC260 network card fails to suspend/resume because the call to
jme_start_irq() was too early, moving the call to jme_start_irq() after
the call to jme_reset_link() makes it work.

Prior this change suspend/resume would fail unless /sys/power/pm_async=0
was explicitly specified.

Relevant bug report: https://bugzilla.kernel.org/show_bug.cgi?id=112351

Signed-off-by: Diego Viola <diego.viola@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

serial: sh-sci: Remove cpufreq notifier to fix crash/deadlock

commit ff1cab374ad98f4b9f408525ca9c08992b4ed784 upstream.

The BSP team noticed that there is spin/mutex lock issue on sh-sci when
CPUFREQ is used.  The issue is that the notifier function may call
mutex_lock() while the spinlock is held, which can lead to a BUG().
This may happen if CPUFREQ is changed while another CPU calls
clk_get_rate().

Taking the spinlock was added to the notifier function in commit
e552de2413edad1a ("sh-sci: add platform device private data"), to
protect the list of serial ports against modification during traversal.
At that time the Common Clock Framework didn't exist yet, and
clk_get_rate() just returned clk->rate without taking a mutex.
Note that since commit d535a2305facf9b4 ("serial: sh-sci: Require a
device per port mapping."), there's no longer a list of serial ports to
traverse, and taking the spinlock became superfluous.

To fix the issue, just remove the cpufreq notifier:
  1. The notifier doesn't work correctly: all it does is update the
     stored clock rate; it does not update the divider in the hardware.
     The divider will only be updated when calling sci_set_termios().
     I believe this was broken back in 2004, when the old
     drivers/char/sh-sci.c driver (where the notifier did update the
     divider) was replaced by drivers/serial/sh-sci.c (where the
     notifier just updated port->uartclk).
     Cfr. full-history-linux commits 6f8deaef2e9675d9 ("[PATCH] sh: port
     sh-sci driver to the new API") and 3f73fe878dc9210a ("[PATCH]
     Remove old sh-sci driver").
  2. On modern SoCs, the sh-sci parent clock rate is no longer related
     to the CPU clock rate anyway, so using a cpufreq notifier is
     futile.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

ext4: fix NULL pointer dereference in ext4_mark_inode_dirty()

commit 5e1021f2b6dff1a86a468a1424d59faae2bc63c1 upstream.

ext4_reserve_inode_write() in ext4_mark_inode_dirty() could fail on
error (e.g. EIO) and iloc.bh can be NULL in this case. But the error is
ignored in the following "if" condition and ext4_expand_extra_isize()
might be called with NULL iloc.bh set, which triggers NULL pointer
dereference.

This is uncovered by commit 8b4953e13f4c ("ext4: reserve code points for
the project quota feature"), which enlarges the ext4_inode size, and
run the following script on new kernel but with old mke2fs:

  #/bin/bash
  mnt=/mnt/ext4
  devname=ext4-error
  dev=/dev/mapper/$devname
  fsimg=/home/fs.img

  trap cleanup 0 1 2 3 9 15

  cleanup()
  {
          umount $mnt >/dev/null 2>&1
          dmsetup remove $devname
          losetup -d $backend_dev
          rm -f $fsimg
          exit 0
  }

  rm -f $fsimg
  fallocate -l 1g $fsimg
  backend_dev=`losetup -f --show $fsimg`
  devsize=`blockdev --getsz $backend_dev`

  good_tab="0 $devsize linear $backend_dev 0"
  error_tab="0 $devsize error $backend_dev 0"

  dmsetup create $devname --table "$good_tab"

  mkfs -t ext4 $dev
  mount -t ext4 -o errors=continue,strictatime $dev $mnt

  dmsetup load $devname --table "$error_tab" && dmsetup resume $devname
  echo 3 > /proc/sys/vm/drop_caches
  ls -l $mnt
  exit 0

[ Patch changed to simplify the function a tiny bit. -- Ted ]

Signed-off-by: Eryu Guan <guaneryu@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

s390/mm: four page table levels vs. fork

commit 3446c13b268af86391d06611327006b059b8bab1 upstream.

The fork of a process with four page table levels is broken since
git commit 6252d702c5311ce9 "[S390] dynamic page tables."

All new mm contexts are created with three page table levels and
an asce limit of 4TB. If the parent has four levels dup_mmap will
add vmas to the new context which are outside of the asce limit.
The subsequent call to copy_page_range will walk the three level
page table structure of the new process with non-zero pgd and pud
indexes. This leads to memory clobbers as the pgd_index *and* the
pud_index is added to the mm->pgd pointer without a pgd_deref
in between.

The init_new_context() function is selecting the number of page
table levels for a new context. The function is used by mm_init()
which in turn is called by dup_mm() and mm_alloc(). These two are
used by fork() and exec(). The init_new_context() function can
distinguish the two cases by looking at mm->context.asce_limit,
for fork() the mm struct has been copied and the number of page
table levels may not change. For exec() the mm_alloc() function
set the new mm structure to zero, in this case a three-level page
table is created as the temporary stack space is located at
STACK_TOP_MAX = 4TB.

This fixes CVE-2016-2143.

Reported-by: Marcin Kościelnicki <koriakin@0x04.net>
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
[bwh: Backported to 3.16:
- 31-bit s390 is still supported so keep the #ifdef CONFIG_64BIT conditions
- PMDs are not accounted so don't call mm_inc_nr_pmds()
- Adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

USB: usbip: fix potential out-of-bounds write

commit b348d7dddb6c4fbfc810b7a0626e8ec9e29f7cbb upstream.

Fix potential out-of-bounds write to urb->transfer_buffer
usbip handles network communication directly in the kernel. When receiving a
packet from its peer, usbip code parses headers according to protocol. As
part of this parsing urb->actual_length is filled. Since the input for
urb->actual_length comes from the network, it should be treated as untrusted.
Any entity controlling the network may put any value in the input and the
preallocated urb->transfer_buffer may not be large enough to hold the data.
Thus, the malicious entity is able to write arbitrary data to kernel memory.

Signed-off-by: Ignat Korchagin <ignat.korchagin@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[bwh: Backported to 3.16: adjust filename]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

usbnet: cleanup after bind() in probe()

commit 1666984c8625b3db19a9abc298931d35ab7bc64b upstream.

In case bind() works, but a later error forces bailing
in probe() in error cases work and a timer may be scheduled.
They must be killed. This fixes an error case related to
the double free reported in
http://www.spinics.net/lists/netdev/msg367669.html
and needs to go on top of Linus' fix to cdc-ncm.

Signed-off-by: Oliver Neukum <ONeukum@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

x86/mm/32: Enable full randomization on i386 and X86_32

commit 8b8addf891de8a00e4d39fc32f93f7c5eb8feceb upstream.

Currently on i386 and on X86_64 when emulating X86_32 in legacy mode, only
the stack and the executable are randomized but not other mmapped files
(libraries, vDSO, etc.). This patch enables randomization for the
libraries, vDSO and mmap requests on i386 and in X86_32 in legacy mode.

By default on i386 there are 8 bits for the randomization of the libraries,
vDSO and mmaps which only uses 1MB of VA.

This patch preserves the original randomness, using 1MB of VA out of 3GB or
4GB. We think that 1MB out of 3GB is not a big cost for having the ASLR.

The first obvious security benefit is that all objects are randomized (not
only the stack and the executable) in legacy mode which highly increases
the ASLR effectiveness, otherwise the attackers may use these
non-randomized areas. But also sensitive setuid/setgid applications are
more secure because currently, attackers can disable the randomization of
these applications by setting the ulimit stack to "unlimited". This is a
very old and widely known trick to disable the ASLR in i386 which has been
allowed for too long.

Another trick used to disable the ASLR was to set the ADDR_NO_RANDOMIZE
personality flag, but fortunately this doesn't work on setuid/setgid
applications because there is security checks which clear Security-relevant
flags.

This patch always randomizes the mmap_legacy_base address, removing the
possibility to disable the ASLR by setting the stack to "unlimited".

Signed-off-by: Hector Marco-Gisbert <hecmargi@upv.es>
Acked-by: Ismael Ripoll Ripoll <iripoll@upv.es>
Acked-by: Kees Cook <keescook@chromium.org>
Acked-by: Arjan van de Ven <arjan@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: akpm@linux-foundation.org
Cc: kees Cook <keescook@chromium.org>
Link: http://lkml.kernel.org/r/1457639460-5242-1-git-send-email-hecmargi@upv.es
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

x86: standardize mmap_rnd() usage

commit 82168140bc4cec7ec9bad39705518541149ff8b7 upstream.

In preparation for splitting out ET_DYN ASLR, this refactors the use of
mmap_rnd() to be used similarly to arm, and extracts the checking of
PF_RANDOMIZE.

Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

netfilter: x_tables: make sure e->next_offset covers remaining blob size

commit 6e94e0cfb0887e4013b3b930fa6ab1fe6bb6ba91 upstream.

Otherwise this function may read data beyond the ruleset blob.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

netfilter: x_tables: validate e->target_offset early

commit bdf533de6968e9686df777dc178486f600c6e617 upstream.

We should check that e->target_offset is sane before
mark_source_chains gets called since it will fetch the target entry
for loop detection.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
[bwh: Backported to 3.16: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

parisc: Unbreak handling exceptions from kernel modules

commit 2ef4dfd9d9f288943e249b78365a69e3ea3ec072 upstream.

Handling exceptions from modules never worked on parisc.
It was just masked by the fact that exceptions from modules
don't happen during normal use.

When a module triggers an exception in get_user() we need to load the
main kernel dp value before accessing the exception_data structure, and
afterwards restore the original dp value of the module on exit.

Noticed-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Helge Deller <deller@gmx.de>
[bwh: Backported to 3.16: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

parisc: Fix kernel crash with reversed copy_from_user()

commit ef72f3110d8b19f4c098a0bff7ed7d11945e70c6 upstream.

The kernel module testcase (lib/test_user_copy.c) exhibited a kernel
crash on parisc if the parameters for copy_from_user were reversed
("illegal reversed copy_to_user" testcase).

Fix this potential crash by checking the fault handler if the faulting
address is in the exception table.

Signed-off-by: Helge Deller <deller@gmx.de>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

parisc: Avoid function pointers for kernel exception routines

commit e3893027a300927049efc1572f852201eb785142 upstream.

We want to avoid the kernel module loader to create function pointers
for the kernel fixup routines of get_user() and put_user(). Changing
the external reference from function type to int type fixes this.

This unbreaks exception handling for get_user() and put_user() when
called from a kernel module.

Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

gpio: pca953x: Use correct u16 value for register word write

commit 9b8e3ec34318663affced3c14d960e78d760dd9a upstream.

The current implementation only uses the first byte in val,
the second byte is always 0. Change it to use cpu_to_le16
to write the two bytes into the register

Signed-off-by: Yong Li <sdliyong@gmail.com>
Reviewed-by: Phil Reid <preid@electromag.com.au>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
[bwh: Backported to 3.16: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

usb: dwc3: keystone: drop dma_mask configuration

commit adf9a3ab90eb44e57f9dbf757acd897838b5ec21 upstream.

The Keystone 2 supports DT-boot only, as result dma_mask will be
always configured properly from DT -
of_platform_device_create_pdata()->of_dma_configure(). More over,
dwc3-keystone.c can be built as module and in this case it's unsafe to
assign local variable as dma_mask.

Hence, remove dma_mask configuration code.

Cc: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

USB: option: add "D-Link DWM-221 B1" device id

commit d48d5691ebf88a15d95ba96486917ffc79256536 upstream.

Thomas reports:
"Windows:

00 diagnostics
01 modem
02 at-port
03 nmea
04 nic

Linux:

T:  Bus=02 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#=  4 Spd=480 MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=2001 ProdID=7e19 Rev=02.32
S:  Manufacturer=Mobile Connect
S:  Product=Mobile Connect
S:  SerialNumber=0123456789ABCDEF
C:  #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
I:  If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
I:  If#= 5 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage"

Reported-by: Thomas Schäfer <tschaefer@t-online.de>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

USB: serial: cp210x: Adding GE Healthcare Device ID

commit cddc9434e3dcc37a85c4412fb8e277d3a582e456 upstream.

The CP2105 is used in the GE Healthcare Remote Alarm Box, with the
Manufacturer ID of 0x1901 and Product ID of 0x0194.

Signed-off-by: Martyn Welch <martyn.welch@collabora.co.uk>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

USB: serial: ftdi_sio: Add support for ICP DAS I-756xU devices

commit ea6db90e750328068837bed34cb1302b7a177339 upstream.

A Fedora user reports that the ftdi_sio driver works properly for the
ICP DAS I-7561U device. Further, the user manual for these devices
instructs users to load the driver and add the ids using the sysfs
interface.

Add support for these in the driver directly so that the devices work
out of the box instead of needing manual configuration.

Reported-by: <thesource@mail.ru>
Signed-off-by: Josh Boyer <jwboyer@fedoraproject.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

Btrfs: fix file/data loss caused by fsync after rename and new inode

commit 56f23fdbb600e6087db7b009775b95ce07cc3195 upstream.

If we rename an inode A (be it a file or a directory), create a new
inode B with the old name of inode A and under the same parent directory,
fsync inode B and then power fail, at log tree replay time we end up
removing inode A completely. If inode A is a directory then all its files
are gone too.

Example scenarios where this happens:
This is reproducible with the following steps, taken from a couple of
test cases written for fstests which are going to be submitted upstream
soon:

   # Scenario 1

   mkfs.btrfs -f /dev/sdc
   mount /dev/sdc /mnt
   mkdir -p /mnt/a/x
   echo "hello" > /mnt/a/x/foo
   echo "world" > /mnt/a/x/bar
   sync
   mv /mnt/a/x /mnt/a/y
   mkdir /mnt/a/x
   xfs_io -c fsync /mnt/a/x
   <power failure happens>

   The next time the fs is mounted, log tree replay happens and
   the directory "y" does not exist nor do the files "foo" and
   "bar" exist anywhere (neither in "y" nor in "x", nor the root
   nor anywhere).

   # Scenario 2

   mkfs.btrfs -f /dev/sdc
   mount /dev/sdc /mnt
   mkdir /mnt/a
   echo "hello" > /mnt/a/foo
   sync
   mv /mnt/a/foo /mnt/a/bar
   echo "world" > /mnt/a/foo
   xfs_io -c fsync /mnt/a/foo
   <power failure happens>

   The next time the fs is mounted, log tree replay happens and the
   file "bar" does not exists anymore. A file with the name "foo"
   exists and it matches the second file we created.

Another related problem that does not involve file/data loss is when a
new inode is created with the name of a deleted snapshot and we fsync it:

   mkfs.btrfs -f /dev/sdc
   mount /dev/sdc /mnt
   mkdir /mnt/testdir
   btrfs subvolume snapshot /mnt /mnt/testdir/snap
   btrfs subvolume delete /mnt/testdir/snap
   rmdir /mnt/testdir
   mkdir /mnt/testdir
   xfs_io -c fsync /mnt/testdir # or fsync some file inside /mnt/testdir
   <power failure>

   The next time the fs is mounted the log replay procedure fails because
   it attempts to delete the snapshot entry (which has dir item key type
   of BTRFS_ROOT_ITEM_KEY) as if it were a regular (non-root) entry,
   resulting in the following error that causes mount to fail:

   [52174.510532] BTRFS info (device dm-0): failed to delete reference to snap, inode 257 parent 257
   [52174.512570] ------------[ cut here ]------------
   [52174.513278] WARNING: CPU: 12 PID: 28024 at fs/btrfs/inode.c:3986 __btrfs_unlink_inode+0x178/0x351 [btrfs]()
   [52174.514681] BTRFS: Transaction aborted (error -2)
   [52174.515630] Modules linked in: btrfs dm_flakey dm_mod overlay crc32c_generic ppdev xor raid6_pq acpi_cpufreq parport_pc tpm_tis sg parport tpm evdev i2c_piix4 proc
   [52174.521568] CPU: 12 PID: 28024 Comm: mount Tainted: G        W       4.5.0-rc6-btrfs-next-27+ #1
   [52174.522805] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS by qemu-project.org 04/01/2014
   [52174.524053]  0000000000000000 ffff8801df2a7710 ffffffff81264e93 ffff8801df2a7758
   [52174.524053]  0000000000000009 ffff8801df2a7748 ffffffff81051618 ffffffffa03591cd
   [52174.524053]  00000000fffffffe ffff88015e6e5000 ffff88016dbc3c88 ffff88016dbc3c88
   [52174.524053] Call Trace:
   [52174.524053]  [<ffffffff81264e93>] dump_stack+0x67/0x90
   [52174.524053]  [<ffffffff81051618>] warn_slowpath_common+0x99/0xb2
   [52174.524053]  [<ffffffffa03591cd>] ? __btrfs_unlink_inode+0x178/0x351 [btrfs]
   [52174.524053]  [<ffffffff81051679>] warn_slowpath_fmt+0x48/0x50
   [52174.524053]  [<ffffffffa03591cd>] __btrfs_unlink_inode+0x178/0x351 [btrfs]
   [52174.524053]  [<ffffffff8118f5e9>] ? iput+0xb0/0x284
   [52174.524053]  [<ffffffffa0359fe8>] btrfs_unlink_inode+0x1c/0x3d [btrfs]
   [52174.524053]  [<ffffffffa038631e>] check_item_in_log+0x1fe/0x29b [btrfs]
   [52174.524053]  [<ffffffffa0386522>] replay_dir_deletes+0x167/0x1cf [btrfs]
   [52174.524053]  [<ffffffffa038739e>] fixup_inode_link_count+0x289/0x2aa [btrfs]
   [52174.524053]  [<ffffffffa038748a>] fixup_inode_link_counts+0xcb/0x105 [btrfs]
   [52174.524053]  [<ffffffffa038a5ec>] btrfs_recover_log_trees+0x258/0x32c [btrfs]
   [52174.524053]  [<ffffffffa03885b2>] ? replay_one_extent+0x511/0x511 [btrfs]
   [52174.524053]  [<ffffffffa034f288>] open_ctree+0x1dd4/0x21b9 [btrfs]
   [52174.524053]  [<ffffffffa032b753>] btrfs_mount+0x97e/0xaed [btrfs]
   [52174.524053]  [<ffffffff8108e1b7>] ? trace_hardirqs_on+0xd/0xf
   [52174.524053]  [<ffffffff8117bafa>] mount_fs+0x67/0x131
   [52174.524053]  [<ffffffff81193003>] vfs_kern_mount+0x6c/0xde
   [52174.524053]  [<ffffffffa032af81>] btrfs_mount+0x1ac/0xaed [btrfs]
   [52174.524053]  [<ffffffff8108e1b7>] ? trace_hardirqs_on+0xd/0xf
   [52174.524053]  [<ffffffff8108c262>] ? lockdep_init_map+0xb9/0x1b3
   [52174.524053]  [<ffffffff8117bafa>] mount_fs+0x67/0x131
   [52174.524053]  [<ffffffff81193003>] vfs_kern_mount+0x6c/0xde
   [52174.524053]  [<ffffffff8119590f>] do_mount+0x8a6/0x9e8
   [52174.524053]  [<ffffffff811358dd>] ? strndup_user+0x3f/0x59
   [52174.524053]  [<ffffffff81195c65>] SyS_mount+0x77/0x9f
   [52174.524053]  [<ffffffff814935d7>] entry_SYSCALL_64_fastpath+0x12/0x6b
   [52174.561288] ---[ end trace 6b53049efb1a3ea6 ]---

Fix this by forcing a transaction commit when such cases happen.
This means we check in the commit root of the subvolume tree if there
was any other inode with the same reference when the inode we are
fsync'ing is a new inode (created in the current transaction).

Test cases for fstests, covering all the scenarios given above, were
submitted upstream for fstests:

  * fstests: generic test for fsync after renaming directory
    https://patchwork.kernel.org/patch/8694281/

  * fstests: generic test for fsync after renaming file
    https://patchwork.kernel.org/patch/8694301/

  * fstests: add btrfs test for fsync after snapshot deletion
    https://patchwork.kernel.org/patch/8670671/

Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
[bwh: Backported to 3.16: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

ip6_tunnel: set rtnl_link_ops before calling register_netdevice

commit b6ee376cb0b7fb4e7e07d6cd248bd40436fb9ba6 upstream.

When creating an ip6tnl tunnel with ip tunnel, rtnl_link_ops is not set
before ip6_tnl_create2 is called. When register_netdevice is called, there
is no linkinfo attribute in the NEWLINK message because of that.

Setting rtnl_link_ops before calling register_netdevice fixes that.

Fixes: 0b112457229d ("ip6tnl: add support of link creation via rtnl")
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@redhat.com>
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

compiler-gcc: disable -ftracer for __noclone functions

commit 95272c29378ee7dc15f43fa2758cb28a5913a06d upstream.

-ftracer can duplicate asm blocks causing compilation to fail in
noclone functions.  For example, KVM declares a global variable
in an asm like

    asm("2: ... \n
         .pushsection data \n
         .global vmx_return \n
         vmx_return: .long 2b");

and -ftracer causes a double declaration.

Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Michal Marek <mmarek@suse.cz>
Cc: kvm@vger.kernel.org
Reported-by: Linda Walsh <lkml@tlinx.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
[bwh: Backported to 3.16: apply to compiler-gcc{4,5}.h]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

xen/events: Mask a moving irq

commit ff1e22e7a638a0782f54f81a6c9cb139aca2da35 upstream.

Moving an unmasked irq may result in irq handler being invoked on both
source and target CPUs.

With 2-level this can happen as follows:

On source CPU:
        evtchn_2l_handle_events() ->
            generic_handle_irq() ->
                handle_edge_irq() ->
                   eoi_pirq():
                       irq_move_irq(data);

                       /***** WE ARE HERE *****/

                       if (VALID_EVTCHN(evtchn))
                           clear_evtchn(evtchn);

If at this moment target processor is handling an unrelated event in
evtchn_2l_handle_events()'s loop it may pick up our event since target's
cpu_evtchn_mask claims that this event belongs to it *and* the event is
unmasked and still pending. At the same time, source CPU will continue
executing its own handle_edge_irq().

With FIFO interrupt the scenario is similar: irq_move_irq() may result
in a EVTCHNOP_unmask hypercall which, in turn, may make the event
pending on the target CPU.

We can avoid this situation by moving and clearing the event while
keeping event masked.

Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

mm: fix invalid node in alloc_migrate_target()

commit 6f25a14a7053b69917e2ebea0d31dd444cd31fd5 upstream.

It is incorrect to use next_node to find a target node, it will return
MAX_NUMNODES or invalid node. This will lead to crash in buddy system
allocation.

Fixes: c8721bbbdd36 ("mm: memory-hotplug: enable memory hotplug to handle hugepage")
Signed-off-by: Xishi Qiu <qiuxishi@huawei.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Joonsoo Kim <js1304@gmail.com>
Cc: David Rientjes <rientjes@google.com>
Cc: "Laura Abbott" <lauraa@codeaurora.org>
Cc: Hui Zhu <zhuhui@xiaomi.com>
Cc: Wang Xiaoqiang <wangxq10@lzu.edu.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

ALSA: timer: Use mod_timer() for rearming the system timer

commit 4a07083ed613644c96c34a7dd2853dc5d7c70902 upstream.

ALSA system timer backend stops the timer via del_timer() without sync
and leaves del_timer_sync() at the close instead.  This is because of
the restriction by the design of ALSA timer: namely, the stop callback
may be called from the timer handler, and calling the sync shall lead
to a hangup.  However, this also triggers a kernel BUG() when the
timer is rearmed immediately after stopping without sync:
kernel BUG at kernel/time/timer.c:966!
Call Trace:
  <IRQ>
  [<ffffffff8239c94e>] snd_timer_s_start+0x13e/0x1a0
  [<ffffffff8239e1f4>] snd_timer_interrupt+0x504/0xec0
  [<ffffffff8122fca0>] ? debug_check_no_locks_freed+0x290/0x290
  [<ffffffff8239ec64>] snd_timer_s_function+0xb4/0x120
  [<ffffffff81296b72>] call_timer_fn+0x162/0x520
  [<ffffffff81296add>] ? call_timer_fn+0xcd/0x520
  [<ffffffff8239ebb0>] ? snd_timer_interrupt+0xec0/0xec0
  ....

It's the place where add_timer() checks the pending timer.  It's clear
that this may happen after the immediate restart without sync in our
cases.

So, the workaround here is just to use mod_timer() instead of
add_timer().  This looks like a band-aid fix, but it's a right move,
as snd_timer_interrupt() takes care of the continuous rearm of timer.

Reported-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

KVM: x86: Inject pending interrupt even if pending nmi exist

commit 321c5658c5e9192dea0d58ab67cf1791e45b2b26 upstream.

Non maskable interrupts (NMI) are preferred to interrupts in current
implementation. If a NMI is pending and NMI is blocked by the result
of nmi_allowed(), pending interrupt is not injected and
enable_irq_window() is not executed, even if interrupts injection is
allowed.

In old kernel (e.g. 2.6.32), schedule() is often called in NMI context.
In this case, interrupts are needed to execute iret that intends end
of NMI. The flag of blocking new NMI is not cleared until the guest
execute the iret, and interrupts are blocked by pending NMI. Due to
this, iret can't be invoked in the guest, and the guest is starved
until block is cleared by some events (e.g. canceling injection).

This patch injects pending interrupts, when it's allowed, even if NMI
is blocked. And, If an interrupts is pending after executing
inject_pending_event(), enable_irq_window() is executed regardless of
NMI pending counter.

Signed-off-by: Yuki Shibuya <shibuya.yk@ncos.nec.co.jp>
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

ALSA: hda - fix front mic problem for a HP desktop

commit e549d190f7b5f94e9ab36bd965028112914d010d upstream.

The front mic jack (pink color) can't detect any plug or unplug. After
applying this fix, both detecting function and recording function
work well.

BugLink: https://bugs.launchpad.net/bugs/1564712
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

ext4: add lockdep annotations for i_data_sem

commit daf647d2dd58cec59570d7698a45b98e580f2076 upstream.

With the internal Quota feature, mke2fs creates empty quota inodes and
quota usage tracking is enabled as soon as the file system is mounted.
Since quotacheck is no longer preallocating all of the blocks in the
quota inode that are likely needed to be written to, we are now seeing
a lockdep false positive caused by needing to allocate a quota block
from inside ext4_map_blocks(), while holding i_data_sem for a data
inode.  This results in this complaint:

  Possible unsafe locking scenario:

        CPU0                    CPU1
        ----                    ----
   lock(&ei->i_data_sem);
                                lock(&s->s_dquot.dqio_mutex);
                                lock(&ei->i_data_sem);
   lock(&s->s_dquot.dqio_mutex);

Google-Bug-Id: 27907753

Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

drm/udl: Use unlocked gem unreferencing

commit 72b9ff0612ad8fc969b910cd00ac16b57a1a9ba4 upstream.

For drm_gem_object_unreference callers are required to hold
dev->struct_mutex, which these paths don't. Enforcing this requirement
has become a bit more strict with

commit ef4c6270bf2867e2f8032e9614d1a8cfc6c71663
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Thu Oct 15 09:36:25 2015 +0200

drm/gem: Check locking in drm_gem_object_unreference

Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

drm/dp: move hw_mutex up the call stack

commit 7779c5e23c5132c22a219f1f5554ef81dd15ee91 upstream.

1) don't let other threads trying to bang on aux channel interrupt the
defer timeout/logic
2) don't let other threads interrupt the i2c over aux logic

Technically, according to people who actually have the DP spec, this
should not be required. In practice, it makes some troublesome Dell
monitor (and perhaps others) work, so probably a case of "It's compliant
if it works with windows" on the hw vendor's part..

v2: rebased to come before DPCD/AUX logging patch for easier backport
to stable branches.

Reported-by: Dave Wysochanski <dwysocha@redhat.com>
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1274157
Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
[bwh: Backported to 3.16: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

sd: Fix excessive capacity printing on devices with blocks bigger than 512 bytes

commit f08bb1e0dbdd0297258d0b8cd4dbfcc057e57b2a upstream.

During revalidate we check whether device capacity has changed before we
decide whether to output disk information or not.

The check for old capacity failed to take into account that we scaled
sdkp->capacity based on the reported logical block size. And therefore
the capacity test would always fail for devices with sectors bigger than
512 bytes and we would print several copies of the same discovery
information.

Avoid scaling sdkp->capacity and instead adjust the value on the fly
when setting the block device capacity and generating fake C/H/S
geometry.

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Reported-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Hannes Reinicke <hare@suse.de>
Reviewed-by: Ewan Milne <emilne@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
[bwh: Backported to 3.16:
- logical_to_sectors() is a new function
- Adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

USB: digi_acceleport: do sanity checking for the number of ports

commit 5a07975ad0a36708c6b0a5b9fea1ff811d0b0c1f upstream.

The driver can be crashed with devices that expose crafted descriptors
with too few endpoints.

See: http://seclists.org/bugtraq/2016/Mar/61

Signed-off-by: Oliver Neukum <ONeukum@suse.com>
[johan: fix OOB endpoint check and add error messages ]
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

USB: cypress_m8: add endpoint sanity check

commit c55aee1bf0e6b6feec8b2927b43f7a09a6d5f754 upstream.

An attack using missing endpoints exists.

CVE-2016-3137

Signed-off-by: Oliver Neukum <ONeukum@suse.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

USB: mct_u232: add sanity checking in probe

commit 4e9a0b05257f29cf4b75f3209243ed71614d062e upstream.

An attack using the lack of sanity checking in probe is known. This
patch checks for the existence of a second port.

CVE-2016-3136

Signed-off-by: Oliver Neukum <ONeukum@suse.com>
[johan: add error message ]
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

ALSA: usb-audio: Fix double-free in error paths after snd_usb_add_audio_stream() call

commit 836b34a935abc91e13e63053d0a83b24dfb5ea78 upstream.

create_fixed_stream_quirk(), snd_usb_parse_audio_interface() and
create_uaxx_quirk() functions allocate the audioformat object by themselves
and free it upon error before returning. However, once the object is linked
to a stream, it's freed again in snd_usb_audio_pcm_free(), thus it'll be
double-freed, eventually resulting in a memory corruption.

This patch fixes these failures in the error paths by unlinking the audioformat
object before freeing it.

Based on a patch by Takashi Iwai <tiwai@suse.de>

[Note for stable backports:
this patch requires the commit 902eb7fd1e4a ('ALSA: usb-audio: Minor
code cleanup in create_fixed_stream_quirk()')]

Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1283358
Reported-by: Ralf Spenneberg <ralf@spenneberg.net>
Signed-off-by: Vladis Dronov <vdronov@redhat.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

ALSA: usb-audio: Minor code cleanup in create_fixed_stream_quirk()

commit 902eb7fd1e4af3ac69b9b30f8373f118c92b9729 upstream.

Just a minor code cleanup: unify the error paths.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

usb: renesas_usbhs: disable TX IRQ before starting TX DMAC transfer

commit 6490865c67825277b29638e839850882600b48ec upstream.

This patch adds a code to surely disable TX IRQ of the pipe before
starting TX DMAC transfer. Otherwise, a lot of unnecessary TX IRQs
may happen in rare cases when DMAC is used.

Fixes: e73a989 ("usb: renesas_usbhs: add DMAEngine support")
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

usb: renesas_usbhs: avoid NULL pointer derefernce in usbhsf_pkt_handler()

commit 894f2fc44f2f3f48c36c973b1123f6ab298be160 upstream.

When unexpected situation happened (e.g. tx/rx irq happened while
DMAC is used), the usbhsf_pkt_handler() was possible to cause NULL
pointer dereference like the followings:

Unable to handle kernel NULL pointer dereference at virtual address 00000000
pgd = c0004000
[00000000] *pgd=00000000
Internal error: Oops: 80000007 [#1] SMP ARM
Modules linked in: usb_f_acm u_serial g_serial libcomposite
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.5.0-rc6-00842-gac57066-dirty #63
Hardware name: Generic R8A7790 (Flattened Device Tree)
task: c0729c00 ti: c0724000 task.ti: c0724000
PC is at 0x0
LR is at usbhsf_pkt_handler+0xac/0x118
pc : [<00000000>]    lr : [<c03257e0>]    psr: 60000193
sp : c0725db8  ip : 00000000  fp : c0725df4
r10: 00000001  r9 : 00000193  r8 : ef3ccab4
r7 : ef3cca10  r6 : eea4586c  r5 : 00000000  r4 : ef19ceb4
r3 : 00000000  r2 : 0000009c  r1 : c0725dc4  r0 : ef19ceb4

This patch adds a condition to avoid the dereference.

Fixes: e73a989 ("usb: renesas_usbhs: add DMAEngine support")
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

drm/radeon: add a dpm quirk for all R7 370 parts

commit 0e5585dc870af947fab2af96a88c2d8b4270247c upstream.

Higher mclk values are not stable due to a bug somewhere.
Limit them for now.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

drm/radeon: add another R7 370 quirk

commit a64663d9870364bd2a2df62bf0d3a9fbe5ea62a8 upstream.

bug:
https://bugzilla.kernel.org/show_bug.cgi?id=115291

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

hwmon: (max1111) Return -ENODEV from max1111_read_channel if not instantiated

commit 3c2e2266a5bd2d1cef258e6e54dca1d99946379f upstream.

arm:pxa_defconfig can result in the following crash if the max1111 driver
is not instantiated.

Unhandled fault: page domain fault (0x01b) at 0x00000000
pgd = c0004000
[00000000] *pgd=00000000
Internal error: : 1b [#1] PREEMPT ARM
Modules linked in:
CPU: 0 PID: 300 Comm: kworker/0:1 Not tainted 4.5.0-01301-g1701f680407c #10
Hardware name: SHARP Akita
Workqueue: events sharpsl_charge_toggle
task: c390a000 ti: c391e000 task.ti: c391e000
PC is at max1111_read_channel+0x20/0x30
LR is at sharpsl_pm_pxa_read_max1111+0x2c/0x3c
pc : [<c03aaab0>] lr : [<c0024b50>] psr: 20000013
...
[<c03aaab0>] (max1111_read_channel) from [<c0024b50>]
(sharpsl_pm_pxa_read_max1111+0x2c/0x3c)
[<c0024b50>] (sharpsl_pm_pxa_read_max1111) from [<c00262e0>]
(spitzpm_read_devdata+0x5c/0xc4)
[<c00262e0>] (spitzpm_read_devdata) from [<c0024094>]
(sharpsl_check_battery_temp+0x78/0x110)
[<c0024094>] (sharpsl_check_battery_temp) from [<c0024f9c>]
(sharpsl_charge_toggle+0x48/0x110)
[<c0024f9c>] (sharpsl_charge_toggle) from [<c004429c>]
(process_one_work+0x14c/0x48c)
[<c004429c>] (process_one_work) from [<c0044618>] (worker_thread+0x3c/0x5d4)
[<c0044618>] (worker_thread) from [<c004a238>] (kthread+0xd0/0xec)
[<c004a238>] (kthread) from [<c000a670>] (ret_from_fork+0x14/0x24)

This can occur because the SPI controller driver (SPI_PXA2XX) is built as
module and thus not necessarily loaded. While building SPI_PXA2XX into the
kernel would make the problem disappear, it appears prudent to ensure that
the driver is instantiated before accessing its data structures.

Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

ocfs2/dlm: fix BUG in dlm_move_lockres_to_recovery_list

commit be12b299a83fc807bbaccd2bcb8ec50cbb0cb55c upstream.

When master handles convert request, it queues ast first and then
returns status.  This may happen that the ast is sent before the request
status because the above two messages are sent by two threads.  And
right after the ast is sent, if master down, it may trigger BUG in
dlm_move_lockres_to_recovery_list in the requested node because ast
handler moves it to grant list without clear lock->convert_pending.  So
remove BUG_ON statement and check if the ast is processed in
dlmconvert_remote.

Signed-off-by: Joseph Qi <joseph.qi@huawei.com>
Reported-by: Yiwen Jiang <jiangyiwen@huawei.com>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Tariq Saeed <tariq.x.saeed@oracle.com>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

ocfs2/dlm: fix race between convert and recovery

commit ac7cf246dfdbec3d8fed296c7bf30e16f5099dac upstream.

There is a race window between dlmconvert_remote and
dlm_move_lockres_to_recovery_list, which will cause a lock with
OCFS2_LOCK_BUSY in grant list, thus system hangs.

dlmconvert_remote
{
        spin_lock(&res->spinlock);
        list_move_tail(&lock->list, &res->converting);
        lock->convert_pending = 1;
        spin_unlock(&res->spinlock);

        status = dlm_send_remote_convert_request();
        >>>>>> race window, master has queued ast and return DLM_NORMAL,
               and then down before sending ast.
               this node detects master down and calls
               dlm_move_lockres_to_recovery_list, which will revert the
               lock to grant list.
               Then OCFS2_LOCK_BUSY won't be cleared as new master won't
               send ast any more because it thinks already be authorized.

        spin_lock(&res->spinlock);
        lock->convert_pending = 0;
        if (status != DLM_NORMAL)
                dlm_revert_pending_convert(res, lock);
        spin_unlock(&res->spinlock);
}

In this case, check if res->state has DLM_LOCK_RES_RECOVERING bit set
(res is still in recovering) or res master changed (new master has
finished recovery), reset the status to DLM_RECOVERING, then it will
retry convert.

Signed-off-by: Joseph Qi <joseph.qi@huawei.com>
Reported-by: Yiwen Jiang <jiangyiwen@huawei.com>
Reviewed-by: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Tariq Saeed <tariq.x.saeed@oracle.com>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

drm/radeon: add a dpm quirk for sapphire Dual-X R7 370 2G D5

commit f971f2263deaa4a441e377b385c11aee0f3b3f9a upstream.

bug:
https://bugs.freedesktop.org/show_bug.cgi?id=94692

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

MAINTAINERS: Update mailing list and web page for hwmon subsystem

commit 968ce1b1f45a7d76b5471b19bd035dbecc72f32d upstream.

The old web page for the hwmon subsystem is no longer operational,
and the mailing list has become unreliable. Move both to kernel.org.

Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
[bwh: Backported to 3.16: the set of hwmon drivers is different, so do a
search-and-replace for the same addresses]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

net: bcmgenet: fix skb_len in bcmgenet_xmit_single()

commit 7dd399130efb5a454daf24075b7563d197114e39 upstream.

skb_len needs to be skb_headlen(skb) in bcmgenet_xmit_single().

Fragmented skbs can have only Ethernet + IP + TCP headers (14+20+20=54 bytes)
in the linear buffer, followed by the rest in fragments. Bumping skb_len to
ETH_ZLEN would be incorrect for this case, as it would introduce garbage
between TCP header and the fragment data.

This also works with regular/non-fragmented small packets < ETH_ZLEN bytes.
Successfully tested this on GENETv3 with 42-byte ARP frames.

For testing, I used:
ethtool -K eth0 tx-checksum-ipv4 off
ethtool -K eth0 tx-checksum-ipv6 off
echo 0 > /proc/sys/net/ipv4/tcp_timestamps

Fixes: 1c1008c793fa ("net: bcmgenet: add main driver file")
Signed-off-by: Petri Gynther <pgynther@google.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

ppp: take reference on channels netns

commit 1f461dcdd296eecedaffffc6bae2bfa90bd7eb89 upstream.

Let channels hold a reference on their network namespace.
Some channel types, like ppp_async and ppp_synctty, can have their
userspace controller running in a different namespace. Therefore they
can't rely on them to preclude their netns from being removed from
under them.

==================================================================
BUG: KASAN: use-after-free in ppp_unregister_channel+0x372/0x3a0 at
addr ffff880064e217e0
Read of size 8 by task syz-executor/11581
=============================================================================
BUG net_namespace (Not tainted): kasan: bad access detected
-----------------------------------------------------------------------------

Disabling lock debugging due to kernel taint
INFO: Allocated in copy_net_ns+0x6b/0x1a0 age=92569 cpu=3 pid=6906
[<      none      >] ___slab_alloc+0x4c7/0x500 kernel/mm/slub.c:2440
[<      none      >] __slab_alloc+0x4c/0x90 kernel/mm/slub.c:2469
[<     inline     >] slab_alloc_node kernel/mm/slub.c:2532
[<     inline     >] slab_alloc kernel/mm/slub.c:2574
[<      none      >] kmem_cache_alloc+0x23a/0x2b0 kernel/mm/slub.c:2579
[<     inline     >] kmem_cache_zalloc kernel/include/linux/slab.h:597
[<     inline     >] net_alloc kernel/net/core/net_namespace.c:325
[<      none      >] copy_net_ns+0x6b/0x1a0 kernel/net/core/net_namespace.c:360
[<      none      >] create_new_namespaces+0x2f6/0x610 kernel/kernel/nsproxy.c:95
[<      none      >] copy_namespaces+0x297/0x320 kernel/kernel/nsproxy.c:150
[<      none      >] copy_process.part.35+0x1bf4/0x5760 kernel/kernel/fork.c:1451
[<     inline     >] copy_process kernel/kernel/fork.c:1274
[<      none      >] _do_fork+0x1bc/0xcb0 kernel/kernel/fork.c:1723
[<     inline     >] SYSC_clone kernel/kernel/fork.c:1832
[<      none      >] SyS_clone+0x37/0x50 kernel/kernel/fork.c:1826
[<      none      >] entry_SYSCALL_64_fastpath+0x16/0x7a kernel/arch/x86/entry/entry_64.S:185

INFO: Freed in net_drop_ns+0x67/0x80 age=575 cpu=2 pid=2631
[<      none      >] __slab_free+0x1fc/0x320 kernel/mm/slub.c:2650
[<     inline     >] slab_free kernel/mm/slub.c:2805
[<      none      >] kmem_cache_free+0x2a0/0x330 kernel/mm/slub.c:2814
[<     inline     >] net_free kernel/net/core/net_namespace.c:341
[<      none      >] net_drop_ns+0x67/0x80 kernel/net/core/net_namespace.c:348
[<      none      >] cleanup_net+0x4e5/0x600 kernel/net/core/net_namespace.c:448
[<      none      >] process_one_work+0x794/0x1440 kernel/kernel/workqueue.c:2036
[<      none      >] worker_thread+0xdb/0xfc0 kernel/kernel/workqueue.c:2170
[<      none      >] kthread+0x23f/0x2d0 kernel/drivers/block/aoe/aoecmd.c:1303
[<      none      >] ret_from_fork+0x3f/0x70 kernel/arch/x86/entry/entry_64.S:468
INFO: Slab 0xffffea0001938800 objects=3 used=0 fp=0xffff880064e20000
flags=0x5fffc0000004080
INFO: Object 0xffff880064e20000 @offset=0 fp=0xffff880064e24200

CPU: 1 PID: 11581 Comm: syz-executor Tainted: G    B           4.4.0+
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
rel-1.8.2-0-g33fbe13 by qemu-project.org 04/01/2014
00000000ffffffff ffff8800662c7790 ffffffff8292049d ffff88003e36a300
ffff880064e20000 ffff880064e20000 ffff8800662c77c0 ffffffff816f2054
ffff88003e36a300 ffffea0001938800 ffff880064e20000 0000000000000000
Call Trace:
[<     inline     >] __dump_stack kernel/lib/dump_stack.c:15
[<ffffffff8292049d>] dump_stack+0x6f/0xa2 kernel/lib/dump_stack.c:50
[<ffffffff816f2054>] print_trailer+0xf4/0x150 kernel/mm/slub.c:654
[<ffffffff816f875f>] object_err+0x2f/0x40 kernel/mm/slub.c:661
[<     inline     >] print_address_description kernel/mm/kasan/report.c:138
[<ffffffff816fb0c5>] kasan_report_error+0x215/0x530 kernel/mm/kasan/report.c:236
[<     inline     >] kasan_report kernel/mm/kasan/report.c:259
[<ffffffff816fb4de>] __asan_report_load8_noabort+0x3e/0x40 kernel/mm/kasan/report.c:280
[<     inline     >] ? ppp_pernet kernel/include/linux/compiler.h:218
[<ffffffff83ad71b2>] ? ppp_unregister_channel+0x372/0x3a0 kernel/drivers/net/ppp/ppp_generic.c:2392
[<     inline     >] ppp_pernet kernel/include/linux/compiler.h:218
[<ffffffff83ad71b2>] ppp_unregister_channel+0x372/0x3a0 kernel/drivers/net/ppp/ppp_generic.c:2392
[<     inline     >] ? ppp_pernet kernel/drivers/net/ppp/ppp_generic.c:293
[<ffffffff83ad6f26>] ? ppp_unregister_channel+0xe6/0x3a0 kernel/drivers/net/ppp/ppp_generic.c:2392
[<ffffffff83ae18f3>] ppp_asynctty_close+0xa3/0x130 kernel/drivers/net/ppp/ppp_async.c:241
[<ffffffff83ae1850>] ? async_lcp_peek+0x5b0/0x5b0 kernel/drivers/net/ppp/ppp_async.c:1000
[<ffffffff82c33239>] tty_ldisc_close.isra.1+0x99/0xe0 kernel/drivers/tty/tty_ldisc.c:478
[<ffffffff82c332c0>] tty_ldisc_kill+0x40/0x170 kernel/drivers/tty/tty_ldisc.c:744
[<ffffffff82c34943>] tty_ldisc_release+0x1b3/0x260 kernel/drivers/tty/tty_ldisc.c:772
[<ffffffff82c1ef21>] tty_release+0xac1/0x13e0 kernel/drivers/tty/tty_io.c:1901
[<ffffffff82c1e460>] ? release_tty+0x320/0x320 kernel/drivers/tty/tty_io.c:1688
[<ffffffff8174de36>] __fput+0x236/0x780 kernel/fs/file_table.c:208
[<ffffffff8174e405>] ____fput+0x15/0x20 kernel/fs/file_table.c:244
[<ffffffff813595ab>] task_work_run+0x16b/0x200 kernel/kernel/task_work.c:115
[<     inline     >] exit_task_work kernel/include/linux/task_work.h:21
[<ffffffff81307105>] do_exit+0x8b5/0x2c60 kernel/kernel/exit.c:750
[<ffffffff813fdd20>] ? debug_check_no_locks_freed+0x290/0x290 kernel/kernel/locking/lockdep.c:4123
[<ffffffff81306850>] ? mm_update_next_owner+0x6f0/0x6f0 kernel/kernel/exit.c:357
[<ffffffff813215e6>] ? __dequeue_signal+0x136/0x470 kernel/kernel/signal.c:550
[<ffffffff8132067b>] ? recalc_sigpending_tsk+0x13b/0x180 kernel/kernel/signal.c:145
[<ffffffff81309628>] do_group_exit+0x108/0x330 kernel/kernel/exit.c:880
[<ffffffff8132b9d4>] get_signal+0x5e4/0x14f0 kernel/kernel/signal.c:2307
[<     inline     >] ? kretprobe_table_lock kernel/kernel/kprobes.c:1113
[<ffffffff8151d355>] ? kprobe_flush_task+0xb5/0x450 kernel/kernel/kprobes.c:1158
[<ffffffff8115f7d3>] do_signal+0x83/0x1c90 kernel/arch/x86/kernel/signal.c:712
[<ffffffff8151d2a0>] ? recycle_rp_inst+0x310/0x310 kernel/include/linux/list.h:655
[<ffffffff8115f750>] ? setup_sigcontext+0x780/0x780 kernel/arch/x86/kernel/signal.c:165
[<ffffffff81380864>] ? finish_task_switch+0x424/0x5f0 kernel/kernel/sched/core.c:2692
[<     inline     >] ? finish_lock_switch kernel/kernel/sched/sched.h:1099
[<ffffffff81380560>] ? finish_task_switch+0x120/0x5f0 kernel/kernel/sched/core.c:2678
[<     inline     >] ? context_switch kernel/kernel/sched/core.c:2807
[<ffffffff85d794e9>] ? __schedule+0x919/0x1bd0 kernel/kernel/sched/core.c:3283
[<ffffffff81003901>] exit_to_usermode_loop+0xf1/0x1a0 kernel/arch/x86/entry/common.c:247
[<     inline     >] prepare_exit_to_usermode kernel/arch/x86/entry/common.c:282
[<ffffffff810062ef>] syscall_return_slowpath+0x19f/0x210 kernel/arch/x86/entry/common.c:344
[<ffffffff85d88022>] int_ret_from_sys_call+0x25/0x9f kernel/arch/x86/entry/entry_64.S:281
Memory state around the buggy address:
ffff880064e21680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff880064e21700: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
>ffff880064e21780: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
                                                       ^
ffff880064e21800: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff880064e21880: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
==================================================================

Fixes: 273ec51dd7ce ("net: ppp_generic - introduce net-namespace functionality v2")
Reported-by: Baozeng Ding <sploving1@gmail.com>
Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Reviewed-by: Cyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

ideapad-laptop: Add ideapad Y700 (15) to the no_hw_rfkill DMI list

commit 4db9675d927a71faa66e5ab128d2390d6329750b upstream.

Some Lenovo ideapad models lack a physical rfkill switch.
On Lenovo models ideapad Y700 Touch-15ISK and ideapad Y700-15ISK,
ideapad-laptop would wrongly report all radios as blocked by
hardware which caused wireless network connections to fail.

Add these models without an rfkill switch to the no_hw_rfkill list.

Signed-off-by: John Dahlstrom <jodarom@sdf.org>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

ALSA: hda - Apply fix for white noise on Asus N550JV, too

commit 83a9efb5b8170b7cffef4f62656656e1d8ad2ccd upstream.

Apply the new fixup that is used for ASUS N750JV to another similar
model, N500JV, too, for reducing the headphone noise.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=115181
Signed-off-by: Bobi Mihalca <bobbymihalca@touchtech.ro>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

ALSA: hda - Fix white noise on Asus N750JV headphone

commit 9d4dc5840f93bcb002fa311693349deae7702bc5 upstream.

For reducing the noise from the headphone output on ASUS N750JV,
call the existing fixup, alc_fixup_auto_mute_via_amp(), additionally.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=115181
Signed-off-by: Bobi Mihalca <bobbymihalca@touchtech.ro>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

ALSA: hda - Asus N750JV external subwoofer fixup

commit 70cf2cbd685e218c3ffd105d9fb6cf0f8d767481 upstream.

ASUS N750JV needs the same fixup as N550 for enabling its subwoofer.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=115181
Signed-off-by: Bobi Mihalca <bobbymihalca@touchtech.ro>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

rapidio/rionet: fix deadlock on SMP

commit 36915976eca58f2eefa040ba8f9939672564df61 upstream.

Fix deadlocking during concurrent receive and transmit operations on SMP
platforms caused by the use of incorrect lock: on transmit 'tx_lock'
spinlock should be used instead of 'lock' which is used for receive
operation.

This fix is applicable to kernel versions starting from v2.15.

Signed-off-by: Aurelien Jacquiot <a-jacquiot@ti.com>
Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Andre van Herk <andre.van.herk@prodrive-technologies.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

fs/coredump: prevent fsuid=0 dumps into user-controlled directories

commit 378c6520e7d29280f400ef2ceaf155c86f05a71a upstream.

This commit fixes the following security hole affecting systems where
all of the following conditions are fulfilled:

- The fs.suid_dumpable sysctl is set to 2.
- The kernel.core_pattern sysctl's value starts with "/". (Systems
   where kernel.core_pattern starts with "|/" are not affected.)
- Unprivileged user namespace creation is permitted. (This is
   true on Linux >=3.8, but some distributions disallow it by
   default using a distro patch.)

Under these conditions, if a program executes under secure exec rules,
causing it to run with the SUID_DUMP_ROOT flag, then unshares its user
namespace, changes its root directory and crashes, the coredump will be
written using fsuid=0 and a path derived from kernel.core_pattern - but
this path is interpreted relative to the root directory of the process,
allowing the attacker to control where a coredump will be written with
root privileges.

To fix the security issue, always interpret core_pattern for dumps that
are written under SUID_DUMP_ROOT relative to the root directory of init.

Signed-off-by: Jann Horn <jann@thejh.net>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
[bwh: Backported to 3.16: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

tracing: Fix trace_printk() to print when not using bprintk()

commit 3debb0a9ddb16526de8b456491b7db60114f7b5e upstream.

The trace_printk() code will allocate extra buffers if the compile detects
that a trace_printk() is used. To do this, the format of the trace_printk()
is saved to the __trace_printk_fmt section, and if that section is bigger
than zero, the buffers are allocated (along with a message that this has
happened).

If trace_printk() uses a format that is not a constant, and thus something
not guaranteed to be around when the print happens, the compiler optimizes
the fmt out, as it is not used, and the __trace_printk_fmt section is not
filled. This means the kernel will not allocate the special buffers needed
for the trace_printk() and the trace_printk() will not write anything to the
tracing buffer.

Adding a "__used" to the variable in the __trace_printk_fmt section will
keep it around, even though it is set to NULL. This will keep the string
from being printed in the debugfs/tracing/printk_formats section as it is
not needed.

Reported-by: Vlastimil Babka <vbabka@suse.cz>
Fixes: 07d777fe8c398 "tracing: Add percpu buffers for trace_printk()"
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

KVM: fix spin_lock_init order on x86

commit e9ad4ec8379ad1ba6f68b8ca1c26b50b5ae0a327 upstream.

Moving the initialization earlier is needed in 4.6 because
kvm_arch_init_vm is now using mmu_lock, causing lockdep to
complain:

[  284.440294] INFO: trying to register non-static key.
[  284.445259] the code is fine but needs lockdep annotation.
[  284.450736] turning off the locking correctness validator.
...
[  284.528318]  [<ffffffff810aecc3>] lock_acquire+0xd3/0x240
[  284.533733]  [<ffffffffa0305aa0>] ? kvm_page_track_register_notifier+0x20/0x60 [kvm]
[  284.541467]  [<ffffffff81715581>] _raw_spin_lock+0x41/0x80
[  284.546960]  [<ffffffffa0305aa0>] ? kvm_page_track_register_notifier+0x20/0x60 [kvm]
[  284.554707]  [<ffffffffa0305aa0>] kvm_page_track_register_notifier+0x20/0x60 [kvm]
[  284.562281]  [<ffffffffa02ece70>] kvm_mmu_init_vm+0x20/0x30 [kvm]
[  284.568381]  [<ffffffffa02dbf7a>] kvm_arch_init_vm+0x1ea/0x200 [kvm]
[  284.574740]  [<ffffffffa02bff3f>] kvm_dev_ioctl+0xbf/0x4d0 [kvm]

However, it also helps fixing a preexisting problem, which is why this
patch is also good for stable kernels: kvm_create_vm was incrementing
current->mm->mm_count but not decrementing it at the out_err label (in
case kvm_init_mmu_notifier failed).  The new initialization order makes
it possible to add the required mmdrop without adding a new error label.

Reported-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

KVM: VMX: avoid guest hang on invalid invept instruction

commit 2849eb4f99d54925c543db12917127f88b3c38ff upstream.

A guest executing an invalid invept instruction would hang
because the instruction pointer was not updated.

Fixes: bfd0a56b90005f8c8a004baf407ad90045c2b11e
Reviewed-by: David Matlack <dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

target: Fix target_release_cmd_kref shutdown comp leak

commit 5e47f1985d7107331c3f64fb3ec83d66fd73577e upstream.

This patch fixes an active I/O shutdown bug for fabric
drivers using target_wait_for_sess_cmds(), where se_cmd
descriptor shutdown would result in hung tasks waiting
indefinitely for se_cmd->cmd_wait_comp to complete().

To address this bug, drop the incorrect list_del_init()
usage in target_wait_for_sess_cmds() and always complete()
during se_cmd target_release_cmd_kref() put, in order to
let caller invoke the final fabric release callback
into se_cmd->se_tfo->release_cmd() code.

Reported-by: Himanshu Madhani <himanshu.madhani@qlogic.com>
Tested-by: Himanshu Madhani <himanshu.madhani@qlogic.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

mdio-sun4i: oops in error handling in probe

commit 227f33beab746aeec4ef3305bd17b1d374df09e7 upstream.

We could end up dereferencing an error pointer when we call
regulator_disable().

Fixes: 4bdcb1dd9feb ('net: Add MDIO bus driver for the Allwinner EMAC')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

bitops: Do not default to __clear_bit() for __clear_bit_unlock()

commit f75d48644c56a31731d17fa693c8175328957e1d upstream.

__clear_bit_unlock() is a special little snowflake. While it carries the
non-atomic '__' prefix, it is specifically documented to pair with
test_and_set_bit() and therefore should be 'somewhat' atomic.

Therefore the generic implementation of __clear_bit_unlock() cannot use
the fully non-atomic __clear_bit() as a default.

If an arch is able to do better; is must provide an implementation of
__clear_bit_unlock() itself.

Specifically, this came up as a result of hackbench livelock'ing in
slab_lock() on ARC with SMP + SLUB + !LLSC.

The issue was incorrect pairing of atomic ops.

slab_lock() -> bit_spin_lock() -> test_and_set_bit()
slab_unlock() -> __bit_spin_unlock() -> __clear_bit()

The non serializing __clear_bit() was getting "lost"

80543b8e: ld_s       r2,[r13,0] <--- (A) Finds PG_locked is set
80543b90: or         r3,r2,1    <--- (B) other core unlocks right here
80543b94: st_s       r3,[r13,0] <--- (C) sets PG_locked (overwrites unlock)

Fixes ARC STAR 9000817404 (and probably more).

Reported-by: Vineet Gupta <Vineet.Gupta1@synopsys.com>
Tested-by: Vineet Gupta <Vineet.Gupta1@synopsys.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Helge Deller <deller@gmx.de>
Cc: James E.J. Bottomley <jejb@parisc-linux.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Noam Camus <noamc@ezchip.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20160309114054.GJ6356@twins.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

tunnels: Don't apply GRO to multiple layers of encapsulation.

commit fac8e0f579695a3ecbc4d3cac369139d7f819971 upstream.

When drivers express support for TSO of encapsulated packets, they
only mean that they can do it for one layer of encapsulation.
Supporting additional levels would mean updating, at a minimum,
more IP length fields and they are unaware of this.

No encapsulation device expresses support for handling offloaded
encapsulated packets, so we won't generate these types of frames
in the transmit path. However, GRO doesn't have a check for
multiple levels of encapsulation and will attempt to build them.

UDP tunnel GRO actually does prevent this situation but it only
handles multiple UDP tunnels stacked on top of each other. This
generalizes that solution to prevent any kind of tunnel stacking
that would cause problems.

Fixes: bf5a755f ("net-gre-gro: Add GRE support to the GRO stack")
Signed-off-by: Jesse Gross <jesse@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
[bwh: Backported to 3.16:
- Drop the ipip and sit cases
- Adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

net: bcmgenet: fix dma api length mismatch

commit eee577232203842b4dcadb7ab477a298479633ed upstream.

When un-mapping skb->data in __bcmgenet_tx_reclaim(),
we must use the length that was used in original dma_map_single(),
instead of skb->len that might be bigger (includes the frags)

We simply can store skb_len into tx_cb_ptr->dma_len and use it
at unmap time.

Fixes: 1c1008c793fa ("net: bcmgenet: add main driver file")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
[bwh: Backported to 3.16: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

ethernet: micrel: fix some error codes

commit 3af0d554c1ce11e9d0953381ff566271f9ab81a9 upstream.

There were two issues here:
1) dma_mapping_error() return true/false but we want to return -ENOMEM
2) If dmaengine_prep_slave_sg() failed then "err" wasn't set but
presumably that should be -ENOMEM as well.

I changed the success path to "return 0;" instead of "return ret;" for
clarity.

Fixes: 94fe8c683cea ('ks8842: Support DMA when accessed via timberdale')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

splice: handle zero nr_pages in splice_to_pipe()

commit d6785d9152147596f60234157da2b02540c3e60f upstream.

Running the following command:

busybox cat /sys/kernel/debug/tracing/trace_pipe > /dev/null

with any tracing enabled pretty very quickly leads to various NULL
pointer dereferences and VM BUG_ON()s, such as these:

BUG: unable to handle kernel NULL pointer dereference at 0000000000000020
IP: [<ffffffff8119df6c>] generic_pipe_buf_release+0xc/0x40
Call Trace:
  [<ffffffff811c48a3>] splice_direct_to_actor+0x143/0x1e0
  [<ffffffff811c42e0>] ? generic_pipe_buf_nosteal+0x10/0x10
  [<ffffffff811c49cf>] do_splice_direct+0x8f/0xb0
  [<ffffffff81196869>] do_sendfile+0x199/0x380
  [<ffffffff81197600>] SyS_sendfile64+0x90/0xa0
  [<ffffffff8192cbee>] entry_SYSCALL_64_fastpath+0x12/0x6d

page dumped because: VM_BUG_ON_PAGE(atomic_read(&page->_count) == 0)
kernel BUG at include/linux/mm.h:367!
invalid opcode: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC
RIP: [<ffffffff8119df9c>] generic_pipe_buf_release+0x3c/0x40
Call Trace:
  [<ffffffff811c48a3>] splice_direct_to_actor+0x143/0x1e0
  [<ffffffff811c42e0>] ? generic_pipe_buf_nosteal+0x10/0x10
  [<ffffffff811c49cf>] do_splice_direct+0x8f/0xb0
  [<ffffffff81196869>] do_sendfile+0x199/0x380
  [<ffffffff81197600>] SyS_sendfile64+0x90/0xa0
  [<ffffffff8192cd1e>] tracesys_phase2+0x84/0x89

(busybox's cat uses sendfile(2), unlike the coreutils version)

This is because tracing_splice_read_pipe() can call splice_to_pipe()
with spd->nr_pages == 0.  spd_pages underflows in splice_to_pipe() and
we fill the page pointers and the other fields of the pipe_buffers with
garbage.

All other callers of splice_to_pipe() avoid calling it when nr_pages ==
0, and we could make tracing_splice_read_pipe() do that too, but it
seems reasonable to have splice_to_page() handle this condition
gracefully.

Signed-off-by: Rabin Vincent <rabin@rab.in>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

tracing: Fix crash from reading trace_pipe with sendfile

commit a29054d9478d0435ab01b7544da4f674ab13f533 upstream.

If tracing contains data and the trace_pipe file is read with sendfile(),
then it can trigger a NULL pointer dereference and various BUG_ON within the
VM code.

There's a patch to fix this in the splice_to_pipe() code, but it's also a
good idea to not let that happen from trace_pipe either.

Link: http://lkml.kernel.org/r/1457641146-9068-1-git-send-email-rabin@rab.in
Reported-by: Rabin Vincent <rabin.vincent@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

lpfc: fix misleading indentation

commit aeb6641f8ebdd61939f462a8255b316f9bfab707 upstream.

gcc-6 complains about the indentation of the lpfc_destroy_vport_work_array()
call in lpfc_online(), which clearly doesn't look right:

drivers/scsi/lpfc/lpfc_init.c: In function 'lpfc_online':
drivers/scsi/lpfc/lpfc_init.c:2880:3: warning: statement is indented as if it were guarded by... [-Wmisleading-indentation]
   lpfc_destroy_vport_work_array(phba, vports);
   ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/scsi/lpfc/lpfc_init.c:2863:2: note: ...this 'if' clause, but it is not
  if (vports != NULL)
  ^~

Looking at the patch that introduced this code, it's clear that the
behavior is correct and the indentation is wrong.

This fixes the indentation and adds curly braces around the previous
if() block for clarity, as that is most likely what caused the code
to be misindented in the first place.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: 549e55cd2a1b ("[SCSI] lpfc 8.2.2 : Fix locking around HBA's port_list")
Reviewed-by: Sebastian Herbszt <herbszt@gmx.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

tracing: Have preempt(irqs)off trace preempt disabled functions

commit cb86e05390debcc084cfdb0a71ed4c5dbbec517d upstream.

Joel Fernandes reported that the function tracing of preempt disabled
sections was not being reported when running either the preemptirqsoff or
preemptoff tracers. This was due to the fact that the function tracer
callback for those tracers checked if irqs were disabled before tracing. But
this fails when we want to trace preempt off locations as well.

Joel explained that he wanted to see funcitons where interrupts are enabled
but preemption was disabled. The expected output he wanted:

   <...>-2265    1d.h1 3419us : preempt_count_sub <-irq_exit
   <...>-2265    1d..1 3419us : __do_softirq <-irq_exit
   <...>-2265    1d..1 3419us : msecs_to_jiffies <-__do_softirq
   <...>-2265    1d..1 3420us : irqtime_account_irq <-__do_softirq
   <...>-2265    1d..1 3420us : __local_bh_disable_ip <-__do_softirq
   <...>-2265    1..s1 3421us : run_timer_softirq <-__do_softirq
   <...>-2265    1..s1 3421us : hrtimer_run_pending <-run_timer_softirq
   <...>-2265    1..s1 3421us : _raw_spin_lock_irq <-run_timer_softirq
   <...>-2265    1d.s1 3422us : preempt_count_add <-_raw_spin_lock_irq
   <...>-2265    1d.s2 3422us : _raw_spin_unlock_irq <-run_timer_softirq
   <...>-2265    1..s2 3422us : preempt_count_sub <-_raw_spin_unlock_irq
   <...>-2265    1..s1 3423us : rcu_bh_qs <-__do_softirq
   <...>-2265    1d.s1 3423us : irqtime_account_irq <-__do_softirq
   <...>-2265    1d.s1 3423us : __local_bh_enable <-__do_softirq

There's a comment saying that the irq disabled check is because there's a
possible race that tracing_cpu may be set when the function is executed. But
I don't remember that race. For now, I added a check for preemption being
enabled too to not record the function, as there would be no race if that
was the case. I need to re-investigate this, as I'm now thinking that the
tracing_cpu will always be correct. But no harm in keeping the check for
now, except for the slight performance hit.

Link: http://lkml.kernel.org/r/1457770386-88717-1-git-send-email-agnel.joel@gmail.com
Fixes: 5e6d2b9cfa3a "tracing: Use one prologue for the preempt irqs off tracer function tracers"
Cc: stable@vget.kernel.org # 2.6.37+
Reported-by: Joel Fernandes <agnel.joel@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

USB: uas: Reduce can_queue to MAX_CMNDS

commit 55ff8cfbc4e12a7d2187df523938cc671fbebdd1 upstream.

The uas driver can never queue more then MAX_CMNDS (- 1) tags and tags
are shared between luns, so there is no need to claim that we can_queue
some random large number.

Not claiming that we can_queue 65536 commands, fixes the uas driver
failing to initialize while allocating the tag map with a "Page allocation
failure (order 7)" error on systems which have been running for a while
and thus have fragmented memory.

Reported-and-tested-by: Yves-Alexis Perez <corsac@corsac.net>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[bwh: Backported to 3.16: add definition of MAX_CMNDS from upstream commit
5e61aede477e ("uas: Do not use scsi_host_find_tag")]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

USB: usb_driver_claim_interface: add sanity checking

commit 0b818e3956fc1ad976bee791eadcbb3b5fec5bfd upstream.

Attacks that trick drivers into passing a NULL pointer
to usb_driver_claim_interface() using forged descriptors are
known. This thwarts them by sanity checking.

Signed-off-by: Oliver Neukum <ONeukum@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

x86/apic: Fix suspicious RCU usage in smp_trace_call_function_interrupt()

commit 7834c10313fb823e538f2772be78edcdeed2e6e3 upstream.

Since 4.4, I've been able to trigger this occasionally:

===============================
[ INFO: suspicious RCU usage. ]
4.5.0-rc7-think+ #3 Not tainted
Cc: Andi Kleen <ak@linux.intel.com>
Link: http://lkml.kernel.org/r/20160315012054.GA17765@codemonkey.org.uk
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
-------------------------------
./arch/x86/include/asm/msr-trace.h:47 suspicious rcu_dereference_check() usage!

other info that might help us debug this:

RCU used illegally from idle CPU!
rcu_scheduler_active = 1, debug_locks = 1
RCU used illegally from extended quiescent state!
no locks held by swapper/3/0.

stack backtrace:
CPU: 3 PID: 0 Comm: swapper/3 Not tainted 4.5.0-rc7-think+ #3
ffffffff92f821e0 1f3e5c340597d7fc ffff880468e07f10 ffffffff92560c2a
ffff880462145280 0000000000000001 ffff880468e07f40 ffffffff921376a6
ffffffff93665ea0 0000cc7c876d28da 0000000000000005 ffffffff9383dd60
Call Trace:
<IRQ> [<ffffffff92560c2a>] dump_stack+0x67/0x9d
[<ffffffff921376a6>] lockdep_rcu_suspicious+0xe6/0x100
[<ffffffff925ae7a7>] do_trace_write_msr+0x127/0x1a0
[<ffffffff92061c83>] native_apic_msr_eoi_write+0x23/0x30
[<ffffffff92054408>] smp_trace_call_function_interrupt+0x38/0x360
[<ffffffff92d1ca60>] trace_call_function_interrupt+0x90/0xa0
<EOI> [<ffffffff92ac5124>] ? cpuidle_enter_state+0x1b4/0x520

Move the entering_irq() call before ack_APIC_irq(), because entering_irq()
tells the RCU susbstems to end the extended quiescent state, so that the
following trace call in ack_APIC_irq() works correctly.

Suggested-by: Andi Kleen <ak@linux.intel.com>
Fixes: 4787c368a9bc "x86/tracing: Add irq_enter/exit() in smp_trace_reschedule_interrupt()"
Signed-off-by: Dave Jones <davej@codemonkey.org.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

Input: synaptics - handle spurious release of trackstick buttons, again

commit 82be788c96ed5978d3cb4a00079e26b981a3df3f upstream.

Looks like the fimware 8.2 still has the extra buttons spurious release
bug.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=114321
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

Input: ims-pcu - sanity check against missing interfaces

commit a0ad220c96692eda76b2e3fd7279f3dcd1d8a8ff upstream.

A malicious device missing interface can make the driver oops.
Add sanity checking.

Signed-off-by: Oliver Neukum <ONeukum@suse.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

sunrpc/cache: drop reference when sunrpc_cache_pipe_upcall() detects a race

commit a6ab1e8126d205238defbb55d23661a3a5c6a0d8 upstream.

sunrpc_cache_pipe_upcall() can detect a race if CACHE_PENDING is no longer
set. In this case it aborts the queuing of the upcall.
However it has already taken a new counted reference on "h" and
doesn't "put" it, even though it frees the data structure holding the reference.

So let's delay the "cache_get" until we know we need it.

Fixes: f9e1aedc6c79 ("sunrpc/cache: remove races with queuing an upcall.")
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

x86/iopl: Fix iopl capability check on Xen PV

commit c29016cf41fe9fa994a5ecca607cf5f1cd98801e upstream.

iopl(3) is supposed to work if iopl is already 3, even if
unprivileged. This didn't work right on Xen PV. Fix it.

Reviewewd-by: Jan Beulich <JBeulich@suse.com>
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: David Vrabel <david.vrabel@citrix.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jan Beulich <JBeulich@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/8ce12013e6e4c0a44a97e316be4a6faff31bd5ea.1458162709.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

ppp: ensure file->private_data can't be overridden

commit e8e56ffd9d2973398b60ece1f1bebb8d67b4d032 upstream.

Locking ppp_mutex must be done before dereferencing file->private_data,
otherwise it could be modified before ppp_unattached_ioctl() takes the
lock. This could lead ppp_unattached_ioctl() to override ->private_data,
thus leaking reference to the ppp_file previously pointed to.

v2: lock all ppp_ioctl() instead of just checking private_data in
ppp_unattached_ioctl(), to avoid ambiguous behaviour.

Fixes: f3ff8a4d80e8 ("ppp: push BKL down into the driver")
Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

vfs: show_vfsstat: do not ignore errors from show_devname method

commit 5f8d498d4364f544fee17125787a47553db02afa upstream.

Explicitly check show_devname method return code and bail out in case
of an error. This fixes regression introduced by commit 9d4d65748a5c.

Signed-off-by: Dmitry V. Levin <ldv@altlinux.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
[bwh: Backported to 3.16: add the 'out' label]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

nfsd: fix deadlock secinfo+readdir compound

commit 2f6fc056e899bd0144a08da5cacaecbe8997cd74 upstream.

nfsd_lookup_dentry exits with the parent filehandle locked. fh_put also
unlocks if necessary (nfsd filehandle locking is probably too lenient),
so it gets unlocked eventually, but if the following op in the compound
needs to lock it again, we can deadlock.

A fuzzer ran into this; normal clients don't send a secinfo followed by
a readdir in the same compound.

Signed-off-by: J. Bruce Fields <bfields@redhat.com>
[bwh: Backported to 3.16: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

gpiolib: Fix comment referring to gpio_*() in gpiod_*()

commit 1cfab8f8b397f7d95ad43f72ed9a1fa7d26e210e upstream.

Fixes: 79a9becda8940deb ("gpiolib: export descriptor-based GPIO interface")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
[bwh: Backported to 3.16: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

paride: make 'verbose' parameter an 'int' again

commit dec63a4dec2d6d01346fd5d96062e67c0636852b upstream.

gcc-6.0 found an ancient bug in the paride driver, which had a
"module_param(verbose, bool, 0);" since before 2.6.12, but actually uses
it to accept '0', '1' or '2' as arguments:

  drivers/block/paride/pd.c: In function 'pd_init_dev_parms':
  drivers/block/paride/pd.c:298:29: warning: comparison of constant '1' with boolean expression is always false [-Wbool-compare]
   #define DBMSG(msg) ((verbose>1)?(msg):NULL)

In 2012, Rusty did a cleanup patch that also changed the type of the
variable to 'bool', which introduced what is now a gcc warning.

This changes the type back to 'int' and adapts the module_param() line
instead, so it should work as documented in case anyone ever cares about
running the ancient driver with debugging.

Fixes: 90ab5ee94171 ("module_param: make bool parameters really bool (drivers & misc)")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Rusty Russell <rusty@rustcorp.com.au>
Cc: Tim Waugh <tim@cyberelk.net>
Cc: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Cc: Jens Axboe <axboe@fb.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

ALSA: hda - Fix unconditional GPIO toggle via automute

commit 1f7c6658962fa1260c1658d681bd6bb0c746b99a upstream.

Cirrus HD-audio driver may adjust GPIO pins for EAPD dynamically
depending on the jack plug state. This works fine for the auto-mute
mode where the speaker gets muted upon the HP jack plug. OTOH, when
the auto-mute mode is off, this turns off the EAPD unexpectedly
depending on the jack state, which results in the silent speaker
output.

This patch fixes the silent speaker output issue by setting GPIO bits
constantly when the auto-mute mode is off.

Reported-and-tested-by: moosotc@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

HID: i2c-hid: fix OOB write in i2c_hid_set_or_send_report()

commit 3b654288b196ceaa156029d9457ccbded0489b98 upstream.

Even though hid_hw_* checks that passed in data_len is less than
HID_MAX_BUFFER_SIZE it is not enough, as i2c-hid does not necessarily
allocate buffers of HID_MAX_BUFFER_SIZE but rather checks all device
reports and select largest size. In-kernel users normally just send as much
data as report needs, so there is no problem, but hidraw users can do
whatever they please:

BUG: KASAN: slab-out-of-bounds in memcpy+0x34/0x54 at addr ffffffc07135ea80
Write of size 4101 by task syz-executor/8747
CPU: 2 PID: 8747 Comm: syz-executor Tainted: G    BU         3.18.0 #37
Hardware name: Google Tegra210 Smaug Rev 1,3+ (DT)
Call trace:
[<ffffffc00020ebcc>] dump_backtrace+0x0/0x258 arch/arm64/kernel/traps.c:83
[<ffffffc00020ee40>] show_stack+0x1c/0x2c arch/arm64/kernel/traps.c:172
[<     inline     >] __dump_stack lib/dump_stack.c:15
[<ffffffc001958114>] dump_stack+0x90/0x140 lib/dump_stack.c:50
[<     inline     >] print_error_description mm/kasan/report.c:97
[<     inline     >] kasan_report_error mm/kasan/report.c:278
[<ffffffc0004597dc>] kasan_report+0x268/0x530 mm/kasan/report.c:305
[<ffffffc0004592e8>] __asan_storeN+0x20/0x150 mm/kasan/kasan.c:718
[<ffffffc0004594e0>] memcpy+0x30/0x54 mm/kasan/kasan.c:299
[<ffffffc001306354>] __i2c_hid_command+0x2b0/0x7b4 drivers/hid/i2c-hid/i2c-hid.c:178
[<     inline     >] i2c_hid_set_or_send_report drivers/hid/i2c-hid/i2c-hid.c:321
[<ffffffc0013079a0>] i2c_hid_output_raw_report.isra.2+0x3d4/0x4b8 drivers/hid/i2c-hid/i2c-hid.c:589
[<ffffffc001307ad8>] i2c_hid_output_report+0x54/0x68 drivers/hid/i2c-hid/i2c-hid.c:602
[<     inline     >] hid_hw_output_report include/linux/hid.h:1039
[<ffffffc0012cc7a0>] hidraw_send_report+0x400/0x414 drivers/hid/hidraw.c:154
[<ffffffc0012cc7f4>] hidraw_write+0x40/0x64 drivers/hid/hidraw.c:177
[<ffffffc0004681dc>] vfs_write+0x1d4/0x3cc fs/read_write.c:534
[<     inline     >] SYSC_pwrite64 fs/read_write.c:627
[<ffffffc000468984>] SyS_pwrite64+0xec/0x144 fs/read_write.c:614
Object at ffffffc07135ea80, in cache kmalloc-512
Object allocated with size 268 bytes.

Let's check data length against the buffer size before attempting to copy
data over.

Reported-by: Alexander Potapenko <glider@google.com>
Signed-off-by: Dmitry Torokhov <dtor@chromium.org>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

net: mvneta: enable change MAC address when interface is up

commit 928b6519afeb2a5e2dc61154380b545ed66c476a upstream.

Function eth_prepare_mac_addr_change() is called as part of MAC
address change. This function check if interface is running.
To enable change MAC address when interface is running:
IFF_LIVE_ADDR_CHANGE flag must be set to dev->priv_flags field

Fixes: c5aff18204da ("net: mvneta: driver for Marvell Armada 370/XP
network unit")
Signed-off-by: Dmitri Epshtein <dima@marvell.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

md: multipath: don't hardcopy bio in .make_request path

commit fafcde3ac1a418688a734365203a12483b83907a upstream.

Inside multipath_make_request(), multipath maps the incoming
bio into low level device's bio, but it is totally wrong to
copy the bio into mapped bio via '*mapped_bio = *bio'. For
example, .__bi_remaining is kept in the copy, especially if
the incoming bio is chained to via bio splitting, so .bi_end_io
can't be called for the mapped bio at all in the completing path
in this kind of situation.

This patch fixes the issue by using clone style.

Reported-and-tested-by: Andrea Righi <righi.andrea@gmail.com>
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

ath9k: fix buffer overrun for ar9287

commit 83d6f1f15f8cce844b0a131cbc63e444620e48b5 upstream.

Code that was added back in 2.6.38 has an obvious overflow
when accessing a static array, and at the time it was added
only a code comment was put in front of it as a reminder
to have it reviewed properly.

This has not happened, but gcc-6 now points to the specific
overflow:

drivers/net/wireless/ath/ath9k/eeprom.c: In function 'ath9k_hw_get_gain_boundaries_pdadcs':
drivers/net/wireless/ath/ath9k/eeprom.c:483:44: error: array subscript is above array bounds [-Werror=array-bounds]
maxPwrT4[i] = data_9287[idxL].pwrPdg[i][4];
~~~~~~~~~~~~~~~~~~~~~~~~~^~~

It turns out that the correct array length exists in the local
'intercepts' variable of this function, so we can just use that
instead of hardcoding '4', so this patch changes all three
instances to use that variable. The other two instances were
already correct, but it's more consistent this way.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: 940cd2c12ebf ("ath9k_hw: merge the ar9287 version of ath9k_hw_get_gain_boundaries_pdadcs")
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

mlx4: add missing braces in verify_qp_parameters

commit baefd7015cdb304ce6c94f9679d0486c71954766 upstream.

The implementation of QP paravirtualization back in linux-3.7 included
some code that looks very dubious, and gcc-6 has grown smart enough
to warn about it:

drivers/net/ethernet/mellanox/mlx4/resource_tracker.c: In function 'verify_qp_parameters':
drivers/net/ethernet/mellanox/mlx4/resource_tracker.c:3154:5: error: statement is indented as if it were guarded by... [-Werror=misleading-indentation]
     if (optpar & MLX4_QP_OPTPAR_ALT_ADDR_PATH) {
     ^~
drivers/net/ethernet/mellanox/mlx4/resource_tracker.c:3144:4: note: ...this 'if' clause, but it is not
    if (slave != mlx4_master_func_num(dev))

>From looking at the context, I'm reasonably sure that the indentation
is correct but that it should have contained curly braces from the
start, as the update_gid() function in the same patch correctly does.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: 54679e148287 ("mlx4: Implement QP paravirtualization and maintain phys_pkey_cache for smp_snoop")
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

net: Fix use after free in the recvmmsg exit path

commit 34b88a68f26a75e4fded796f1a49c40f82234b7d upstream.

The syzkaller fuzzer hit the following use-after-free:

  Call Trace:
   [<ffffffff8175ea0e>] __asan_report_load8_noabort+0x3e/0x40 mm/kasan/report.c:295
   [<ffffffff851cc31a>] __sys_recvmmsg+0x6fa/0x7f0 net/socket.c:2261
   [<     inline     >] SYSC_recvmmsg net/socket.c:2281
   [<ffffffff851cc57f>] SyS_recvmmsg+0x16f/0x180 net/socket.c:2270
   [<ffffffff86332bb6>] entry_SYSCALL_64_fastpath+0x16/0x7a
  arch/x86/entry/entry_64.S:185

And, as Dmitry rightly assessed, that is because we can drop the
reference and then touch it when the underlying recvmsg calls return
some packets and then hit an error, which will make recvmmsg to set
sock->sk->sk_err, oops, fix it.

Reported-and-Tested-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Kostya Serebryany <kcc@google.com>
Cc: Sasha Levin <sasha.levin@oracle.com>
Fixes: a2e2725541fa ("net: Introduce recvmmsg socket syscall")
http://lkml.kernel.org/r/20160122211644.GC2470@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

rtc: hym8563: fix invalid year calculation

commit d5861262210067fc01b2fb4f7af2fd85a3453f15 upstream.

Year field must be in BCD format, according to
hym8563 datasheet.

Due to the bug year 2016 became 2010.

Fixes: dcaf03849352 ("rtc: add hym8563 rtc-driver")
Signed-off-by: Alexander Kochetkov <al.kochet@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

rtc: vr41xx: Wire up alarm_irq_enable

commit a25f4a95ec3cded34c1250364eba704c5e4fdac4 upstream.

drivers/rtc/rtc-vr41xx.c:229: warning: ‘vr41xx_rtc_alarm_irq_enable’ defined but not used

Apparently the conversion to alarm_irq_enable forgot to wire up the
callback.

Fixes: 16380c153a69c378 ("RTC: Convert rtc drivers to use the alarm_irq_enable method")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

s390/pci: enforce fmb page boundary rule

commit 80c544ded25ac14d7cc3e555abb8ed2c2da99b84 upstream.

The function measurement block must not cross a page boundary. Ensure
that by raising the alignment requirement to the smallest power of 2
larger than the size of the fmb.

Fixes: d0b088531 ("s390/pci: performance statistics and debug infrastructure")
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

s390/pci: extract software counters from fmb

commit 6001018ae8c659e624351d2e73b1272bacd68d6a upstream.

The software counters are not a part of the function measurement
block. Also we do not check for zdev->fmb != NULL when using these
counters (function measurement can be toggled at runtime). Just move
the software counters to struct zpci_dev.

Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

fuse: do not use iocb after it may have been freed

commit 7cabc61e01a0a8b663bd2b4c982aa53048218734 upstream.

There's a race in fuse_direct_IO(), whereby is_sync_kiocb() is called on an
iocb that could have been freed if async io has already completed. The fix
in this case is simple and obvious: cache the result before starting io.

It was discovered by KASan:

kernel: ==================================================================
kernel: BUG: KASan: use after free in fuse_direct_IO+0xb1a/0xcc0 at addr ffff88036c414390

Signed-off-by: Robert Doebbelin <robert@quobyte.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Fixes: bcba24ccdc82 ("fuse: enable asynchronous processing direct IO")
[bwh: Backported to 3.16: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

ALSA: intel8x0: Add clock quirk entry for AD1981B on IBM ThinkPad X41.

commit 4061db03dd71d195b9973ee466f6ed32f6a3fc16 upstream.

The clock measurement on the AC'97 audio card found in the IBM ThinkPad X41
will often fail, so add a quirk entry to fix it.

Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=441087
Signed-off-by: Vittorio Gambaletta <linuxbugs@vittgam.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

ALSA: hda - Add new GPU codec ID 0x10de0082 to snd-hda

commit 2d369c748c2ecc2a012ee85412a04007e67913ec upstream.

Vendor ID 0x10de0082 is used by a yet-to-be-named GPU chip.

This chip also has the 2-ch audio swapping bug, so patch_nvhdmi is
appropriate here.

Signed-off-by: Aaron Plattner <aplattner@nvidia.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
[bwh: Backported to 3.16: don't use HDA_CODEC_ENTRY()]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

ALSA: hda - Add new GPU codec ID 0x10de0083 to snd-hda

commit 3ec622f40913ae036f218e5e7e92df9c1f1753d9 upstream.

Vendor ID 0x10de0083 is used by a yet-to-be-named GPU chip.

This chip also has the 2-ch audio swapping bug, so patch_nvhdmi is
appropriate here.

Signed-off-by: Aaron Plattner <aplattner@nvidia.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

sctp: fix the transports round robin issue when init is retransmitted

commit 39d2adebf137de5f900843f69f5e500932e31047 upstream.

prior to this patch, at the beginning if we have two paths in one assoc,
they may have the same params other than the last_time_heard, it will try
the paths like this:

1st cycle
  try trans1 fail.
  then trans2 is selected.(cause it's last_time_heard is after trans1).

2nd cycle:
  try  trans2 fail
  then trans2 is selected.(cause it's last_time_heard is after trans1).

3rd cycle:
  try  trans2 fail
  then trans2 is selected.(cause it's last_time_heard is after trans1).

....

trans1 will never have change to be selected, which is not what we expect.
we should keeping round robin all the paths if they are just added at the
beginning.

So at first every tranport's last_time_heard should be initialized 0, so
that we ensure they have the same value at the beginning, only by this,
all the transports could get equal chance to be selected.

Then for sctp_trans_elect_best, it should return the trans_next one when
*trans == *trans_next, so that we can try next if it fails,  but now it
always return trans. so we can fix it by exchanging these two params when
we calls sctp_trans_elect_tie().

Fixes: 4c47af4d5eb2 ('net: sctp: rework multihoming retransmission path selection to rfc4960')
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

bus: imx-weim: Take the 'status' property value into account

commit 33b96d2c9579213cf3f36d7b29841b1e464750c4 upstream.

Currently we have an incorrect behaviour when multiple devices
are present under the weim node. For example:

&weim {
...
status = "okay";

sram@0,0 {
...
         status = "okay";
};

mram@0,0 {
...
         status = "disabled";
     };
};

In this case only the 'sram' device should be probed and not 'mram'.

However what happens currently is that the status variable is ignored,
causing the 'sram' device to be disabled and 'mram' to be enabled.

Change the weim_parse_dt() function to use
for_each_available_child_of_node()so that the devices marked with
'status = disabled' are not probed.

Suggested-by: Wolfgang Netbal <wolfgang.netbal@sigmatek.at>
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

xen kconfig: don't "select INPUT_XEN_KBDDEV_FRONTEND"

commit 13aa38e291bdd4e4018f40dd2f75e464814dcbf3 upstream.

The Xen framebuffer driver selects the xen keyboard driver, so the latter
will be built-in if XEN_FBDEV_FRONTEND=y. However, when CONFIG_INPUT
is a loadable module, this configuration cannot work. On mainline kernels,
the symbol will be enabled but not used, while in combination with
a patch I have to detect such useless configurations, we get the
expected link failure:

drivers/input/built-in.o: In function `xenkbd_remove':
xen-kbdfront.c:(.text+0x2f0): undefined reference to `input_unregister_device'
xen-kbdfront.c:(.text+0x30e): undefined reference to `input_unregister_device'

This removes the extra "select", as it just causes more trouble than
it helps. In theory, some defconfig file might break if it has
XEN_FBDEV_FRONTEND in it but not INPUT_XEN_KBDDEV_FRONTEND. The Kconfig
fragment we ship in the kernel (kernel/configs/xen.config) however
already enables both, and anyone using an old .config file would
keep having both enabled.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Suggested-by: David Vrabel <david.vrabel@citrix.com>
Fixes: 36c1132e34bd ("xen kconfig: fix select INPUT_XEN_KBDDEV_FRONTEND")
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

xtensa: clear all DBREAKC registers on start

commit 7de7ac785ae18a2cdc78d7560f48e3213d9ea0ab upstream.

There are XCHAL_NUM_DBREAK registers, clear them all.
This also fixes cryptic assembler error message with binutils 2.25 when
XCHAL_NUM_DBREAK is 0:

as: out of memory allocating 18446744073709551575 bytes after a total
of 495616 bytes

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>