hwmon: (w83792d) Fix NULL pointer dereference by removing unnecessary structure field

commit 0f36b88173f028e372668ae040ab1a496834d278 upstream.

If driver read val value sufficient for
(val & 0x08) && (!(val & 0x80)) && ((val & 0x7) == ((val >> 4) & 0x7))
from device then Null pointer dereference occurs.
(It is possible if tmp = 0b0xyz1xyz, where same literals mean same numbers)
Also lm75[] does not serve a purpose anymore after switching to
devm_i2c_new_dummy_device() in w83791d_detect_subclients().

The patch fixes possible NULL pointer dereference by removing lm75[].

Found by Linux Driver Verification project (linuxtesting.org).

Cc: stable@vger.kernel.org
Signed-off-by: Nadezda Lutovinova <lutovinova@ispras.ru>
Link: https://lore.kernel.org/r/20210921155153.28098-2-lutovinova@ispras.ru
[groeck: Dropped unnecessary continuation lines, fixed multipline alignment]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

hwmon: (w83793) Fix NULL pointer dereference by removing unnecessary structure field

commit dd4d747ef05addab887dc8ff0d6ab9860bbcd783 upstream.

If driver read tmp value sufficient for
(tmp & 0x08) && (!(tmp & 0x80)) && ((tmp & 0x7) == ((tmp >> 4) & 0x7))
from device then Null pointer dereference occurs.
(It is possible if tmp = 0b0xyz1xyz, where same literals mean same numbers)
Also lm75[] does not serve a purpose anymore after switching to
devm_i2c_new_dummy_device() in w83791d_detect_subclients().

The patch fixes possible NULL pointer dereference by removing lm75[].

Found by Linux Driver Verification project (linuxtesting.org).

Cc: stable@vger.kernel.org
Signed-off-by: Nadezda Lutovinova <lutovinova@ispras.ru>
Link: https://lore.kernel.org/r/20210921155153.28098-3-lutovinova@ispras.ru
[groeck: Dropped unnecessary continuation lines, fixed multi-line alignments]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

hwmon: (tmp421) handle I2C errors

commit 2938b2978a70d4cc10777ee71c9e512ffe4e0f4b upstream.

Function i2c_smbus_read_byte_data() can return a negative error number
instead of the data read if I2C transaction failed for whatever reason.

Lack of error checking can lead to serious issues on production
hardware, e.g. errors treated as temperatures produce spurious critical
temperature-crossed-threshold errors in BMC logs for OCP server
hardware. The patch was tested with Mellanox OCP Mezzanine card
emulating TMP421 protocol for temperature sensing which sometimes leads
to I2C protocol error during early boot up stage.

Fixes: 9410700b881f ("hwmon: Add driver for Texas Instruments TMP421/422/423 sensor chips")
Cc: stable@vger.kernel.org
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Link: https://lore.kernel.org/r/20210924093011.26083-1-fercerpav@gmail.com
[groeck: dropped unnecessary line breaks]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fs-verity: fix signed integer overflow with i_size near S64_MAX

commit 80f6e3080bfcf865062a926817b3ca6c4a137a57 upstream.

If the file size is almost S64_MAX, the calculated number of Merkle tree
levels exceeds FS_VERITY_MAX_LEVELS, causing FS_IOC_ENABLE_VERITY to
fail.  This is unintentional, since as the comment above the definition
of FS_VERITY_MAX_LEVELS states, it is enough for over U64_MAX bytes of
data using SHA-256 and 4K blocks.  (Specifically, 4096*128**8 >= 2**64.)

The bug is actually that when the number of blocks in the first level is
calculated from i_size, there is a signed integer overflow due to i_size
being signed.  Fix this by treating i_size as unsigned.

This was found by the new test "generic: test fs-verity EFBIG scenarios"
(https://lkml.kernel.org/r/b1d116cd4d0ea74b9cd86f349c672021e005a75c.1631558495.git.boris@bur.io).

This didn't affect ext4 or f2fs since those have a smaller maximum file
size, but it did affect btrfs which allows files up to S64_MAX bytes.

Reported-by: Boris Burkov <boris@bur.io>
Fixes: 3fda4c617e84 ("fs-verity: implement FS_IOC_ENABLE_VERITY ioctl")
Fixes: fd2d1acfcadf ("fs-verity: add the hook for file ->open()")
Cc: <stable@vger.kernel.org> # v5.4+
Reviewed-by: Boris Burkov <boris@bur.io>
Link: https://lore.kernel.org/r/20210916203424.113376-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ACPI: NFIT: Use fallback node id when numa info in NFIT table is incorrect

commit f060db99374e80e853ac4916b49f0a903f65e9dc upstream.

When ACPI NFIT table is failing to populate correct numa information
on arm64, dax_kmem will get NUMA_NO_NODE from the NFIT driver.

Without this patch, pmem can't be probed as RAM devices on arm64 guest:
  $ndctl create-namespace -fe namespace0.0 --mode=devdax --map=dev -s 1g -a 128M
  kmem dax0.0: rejecting DAX region [mem 0x240400000-0x2bfffffff] with invalid node: -1
  kmem: probe of dax0.0 failed with error -22

Suggested-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Jia He <justin.he@arm.com>
Cc: <stable@vger.kernel.org>
Fixes: c221c0b0308f ("device-dax: "Hotplug" persistent memory for use like normal RAM")
Link: https://lore.kernel.org/r/20210922152919.6940-1-justin.he@arm.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/realtek: Quirks to enable speaker output for Lenovo Legion 7i 15IMHG05, Yoga 7i 14ITL5/15ITL5, and 13s Gen2 laptops.

commit ad7cc2d41b7a8d0c5c5ecff37c3de7a4e137b3a6 upstream.

This patch initializes and enables speaker output on the Lenovo Legion 7i
15IMHG05, Yoga 7i 14ITL5/15ITL5, and 13s Gen2 series of laptops using the
HDA verb sequence specific to each model.

Speaker automute is suppressed for the Lenovo Legion 7i 15IMHG05 to avoid
breaking speaker output on resume and when devices are unplugged from its
headphone jack.

Thanks to: Andreas Holzer, Vincent Morel, sycxyc, Max Christian Pohle and
all others that helped.

[ minor coding style fixes by tiwai ]

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=208555
Signed-off-by: Cameron Berkenpas <cam@neo-zeon.de>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210913212627.339362-1-cam@neo-zeon.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: firewire-motu: fix truncated bytes in message tracepoints

commit cb1bcf5ed536747013fe2b3f9bd56ce3242c295a upstream.

In MOTU protocol v2/v3, first two data chunks across 2nd and 3rd data
channels includes message bytes from device. The total size of message
is 48 bits per data block.

The 'data_block_message' tracepoints event produced by ALSA firewire-motu
driver exposes the sequence of messages to userspace in 64 bit storage,
however lower 32 bits are actually available since current implementation
truncates 16 bits in upper of the message as a result of bit shift
operation within 32 bit storage.

This commit fixes the bug by perform the bit shift in 64 bit storage.

Fixes: c6b0b9e65f09 ("ALSA: firewire-motu: add tracepoints for messages for unique protocol")
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20210920110734.27161-1-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: rawmidi: introduce SNDRV_RAWMIDI_IOCTL_USER_PVERSION

commit 09d23174402da0f10e98da2c61bb5ac8e7d79fdd upstream.

The new framing mode causes the user space regression, because
the alsa-lib code does not initialize the reserved space in
the params structure when the device is opened.

This change adds SNDRV_RAWMIDI_IOCTL_USER_PVERSION like we
do for the PCM interface for the protocol acknowledgment.

Cc: David Henningsson <coding@diwic.se>
Cc: <stable@vger.kernel.org>
Fixes: 08fdced60ca0 ("ALSA: rawmidi: Add framing mode")
BugLink: https://github.com/alsa-project/alsa-lib/issues/178
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20210920171850.154186-1-perex@perex.cz
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: ufs: ufs-pci: Fix Intel LKF link stability

commit 1cbc9ad3eecd492be33b727b4606ae75bc880676 upstream.

Intel LKF can experience link errors. Make fixes to increase link
stability, especially when switching to high speed modes.

Link: https://lore.kernel.org/r/20210831145317.26306-1-adrian.hunter@intel.com
Fixes: b2c57925df1f ("scsi: ufs: ufs-pci: Add support for Intel LKF")
Cc: stable@vger.kernel.org
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cpufreq: schedutil: Destroy mutex before kobject_put() frees the memory

[ Upstream commit cdef1196608892b9a46caa5f2b64095a7f0be60c ]

Since commit e5c6b312ce3c ("cpufreq: schedutil: Use kobject release()
method to free sugov_tunables") kobject_put() has kfree()d the
attr_set before gov_attr_set_put() returns.

kobject_put() isn't the last user of attr_set in gov_attr_set_put(),
the subsequent mutex_destroy() triggers a use-after-free:
| BUG: KASAN: use-after-free in mutex_is_locked+0x20/0x60
| Read of size 8 at addr ffff000800ca4250 by task cpuhp/2/20
|
| CPU: 2 PID: 20 Comm: cpuhp/2 Not tainted 5.15.0-rc1 #12369
| Hardware name: ARM LTD ARM Juno Development Platform/ARM Juno Development
| Platform, BIOS EDK II Jul 30 2018
| Call trace:
|  dump_backtrace+0x0/0x380
|  show_stack+0x1c/0x30
|  dump_stack_lvl+0x8c/0xb8
|  print_address_description.constprop.0+0x74/0x2b8
|  kasan_report+0x1f4/0x210
|  kasan_check_range+0xfc/0x1a4
|  __kasan_check_read+0x38/0x60
|  mutex_is_locked+0x20/0x60
|  mutex_destroy+0x80/0x100
|  gov_attr_set_put+0xfc/0x150
|  sugov_exit+0x78/0x190
|  cpufreq_offline.isra.0+0x2c0/0x660
|  cpuhp_cpufreq_offline+0x14/0x24
|  cpuhp_invoke_callback+0x430/0x6d0
|  cpuhp_thread_fun+0x1b0/0x624
|  smpboot_thread_fn+0x5e0/0xa6c
|  kthread+0x3a0/0x450
|  ret_from_fork+0x10/0x20

Swap the order of the calls.

Fixes: e5c6b312ce3c ("cpufreq: schedutil: Use kobject release() method to free sugov_tunables")
Cc: 4.7+ <stable@vger.kernel.org> # 4.7+
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amdgpu: stop scheduler when calling hw_fini (v2)

[ Upstream commit f7d6779df642720e22bffd449e683bb8690bd3bf ]

This gurantees no more work on the ring can be submitted
to hardware in suspend/resume case, otherwise a potential
race will occur and the ring will get no chance to stay
empty before suspend.

v2: Call drm_sched_resubmit_job before drm_sched_start to
restart jobs from the pending list.

Suggested-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Suggested-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amdgpu: avoid over-handle of fence driver fini in s3 test (v2)

[ Upstream commit 067f44c8b4590c3f24d21a037578a478590f2175 ]

In amdgpu_fence_driver_hw_fini, no need to call drm_sched_fini to stop
scheduler in s3 test, otherwise, fence related failure will arrive
after resume. To fix this and for a better clean up, move drm_sched_fini
from fence_hw_fini to fence_sw_fini, as it's part of driver shutdown, and
should never be called in hw_fini.

v2: rename amdgpu_fence_driver_init to amdgpu_fence_driver_sw_init,
to keep sw_init and sw_fini paired.

Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1668
Fixes: 8d35a2596164c1 ("drm/amdgpu: adjust fence driver enable sequence")
Suggested-by: Christian König <christian.koenig@amd.com>
Tested-by: Mike Lothian <mike@fireburn.co.uk>
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amdgpu: adjust fence driver enable sequence

[ Upstream commit 8d35a2596164c1c9d34d4656fd42b445cd1e247f ]

Fence driver was enabled per ring when sw init on per IP block before.
Change to enable all the fence driver at the same time after
amdgpu_device_ip_init finished.
Rename some function related to fence to make it reasonable for read.

Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: qla2xxx: Changes to support kdump kernel for NVMe BFS

[ Upstream commit 4a0a542fe5e4273baf9228459ef3f75c29490cba ]

The MSI-X and MSI calls fails in kdump kernel. Because of this
qla2xxx_create_qpair() fails leading to .create_queue callback failure.
The fix is to return existing qpair instead of allocating new one and
allocate a single hw queue.

[   19.975838] qla2xxx [0000:d8:00.1]-00c7:11: MSI-X: Failed to enable support,
giving   up -- 16/-28.
[   19.984885] qla2xxx [0000:d8:00.1]-0037:11: Falling back-to MSI mode --
ret=-28.
[   19.992278] qla2xxx [0000:d8:00.1]-0039:11: Falling back-to INTa mode --
ret=-28.
..
..
..
[   21.141518] qla2xxx [0000:d8:00.0]-2104:2: qla_nvme_alloc_queue: handle
00000000e7ee499d, idx =1, qsize 32
[   21.151166] qla2xxx [0000:d8:00.0]-0181:2: FW/Driver is not multi-queue capable.
[   21.158558] qla2xxx [0000:d8:00.0]-2122:2: Failed to allocate qpair
[   21.164824] nvme nvme0: NVME-FC{0}: reset: Reconnect attempt failed (-22)
[   21.171612] nvme nvme0: NVME-FC{0}: Reconnect attempt in 2 seconds

Link: https://lore.kernel.org/r/20210810043720.1137-13-njavali@marvell.com
Cc: stable@vger.kernel.org
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cpufreq: schedutil: Use kobject release() method to free sugov_tunables

[ Upstream commit e5c6b312ce3cc97e90ea159446e6bfa06645364d ]

The struct sugov_tunables is protected by the kobject, so we can't free
it directly. Otherwise we would get a call trace like this:
  ODEBUG: free active (active state 0) object type: timer_list hint: delayed_work_timer_fn+0x0/0x30
  WARNING: CPU: 3 PID: 720 at lib/debugobjects.c:505 debug_print_object+0xb8/0x100
  Modules linked in:
  CPU: 3 PID: 720 Comm: a.sh Tainted: G        W         5.14.0-rc1-next-20210715-yocto-standard+ #507
  Hardware name: Marvell OcteonTX CN96XX board (DT)
  pstate: 40400009 (nZcv daif +PAN -UAO -TCO BTYPE=--)
  pc : debug_print_object+0xb8/0x100
  lr : debug_print_object+0xb8/0x100
  sp : ffff80001ecaf910
  x29: ffff80001ecaf910 x28: ffff00011b10b8d0 x27: ffff800011043d80
  x26: ffff00011a8f0000 x25: ffff800013cb3ff0 x24: 0000000000000000
  x23: ffff80001142aa68 x22: ffff800011043d80 x21: ffff00010de46f20
  x20: ffff800013c0c520 x19: ffff800011d8f5b0 x18: 0000000000000010
  x17: 6e6968207473696c x16: 5f72656d6974203a x15: 6570797420746365
  x14: 6a626f2029302065 x13: 303378302f307830 x12: 2b6e665f72656d69
  x11: ffff8000124b1560 x10: ffff800012331520 x9 : ffff8000100ca6b0
  x8 : 000000000017ffe8 x7 : c0000000fffeffff x6 : 0000000000000001
  x5 : ffff800011d8c000 x4 : ffff800011d8c740 x3 : 0000000000000000
  x2 : ffff0001108301c0 x1 : ab3c90eedf9c0f00 x0 : 0000000000000000
  Call trace:
   debug_print_object+0xb8/0x100
   __debug_check_no_obj_freed+0x1c0/0x230
   debug_check_no_obj_freed+0x20/0x88
   slab_free_freelist_hook+0x154/0x1c8
   kfree+0x114/0x5d0
   sugov_exit+0xbc/0xc0
   cpufreq_exit_governor+0x44/0x90
   cpufreq_set_policy+0x268/0x4a8
   store_scaling_governor+0xe0/0x128
   store+0xc0/0xf0
   sysfs_kf_write+0x54/0x80
   kernfs_fop_write_iter+0x128/0x1c0
   new_sync_write+0xf0/0x190
   vfs_write+0x2d4/0x478
   ksys_write+0x74/0x100
   __arm64_sys_write+0x24/0x30
   invoke_syscall.constprop.0+0x54/0xe0
   do_el0_svc+0x64/0x158
   el0_svc+0x2c/0xb0
   el0t_64_sync_handler+0xb0/0xb8
   el0t_64_sync+0x198/0x19c
  irq event stamp: 5518
  hardirqs last  enabled at (5517): [<ffff8000100cbd7c>] console_unlock+0x554/0x6c8
  hardirqs last disabled at (5518): [<ffff800010fc0638>] el1_dbg+0x28/0xa0
  softirqs last  enabled at (5504): [<ffff8000100106e0>] __do_softirq+0x4d0/0x6c0
  softirqs last disabled at (5483): [<ffff800010049548>] irq_exit+0x1b0/0x1b8

So split the original sugov_tunables_free() into two functions,
sugov_clear_global_tunables() is just used to clear the global_tunables
and the new sugov_tunables_free() is used as kobj_type::release to
release the sugov_tunables safely.

Fixes: 9bdcb44e391d ("cpufreq: schedutil: New governor based on scheduler utilization data")
Cc: 4.7+ <stable@vger.kernel.org> # 4.7+
Signed-off-by: Kevin Hao <haokexin@gmail.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tty: Fix out-of-bound vmalloc access in imageblit

[ Upstream commit 3b0c406124719b625b1aba431659f5cdc24a982c ]

This issue happens when a userspace program does an ioctl
FBIOPUT_VSCREENINFO passing the fb_var_screeninfo struct
containing only the fields xres, yres, and bits_per_pixel
with values.

If this struct is the same as the previous ioctl, the
vc_resize() detects it and doesn't call the resize_screen(),
leaving the fb_var_screeninfo incomplete. And this leads to
the updatescrollmode() calculates a wrong value to
fbcon_display->vrows, which makes the real_y() return a
wrong value of y, and that value, eventually, causes
the imageblit to access an out-of-bound address value.

To solve this issue I made the resize_screen() be called
even if the screen does not need any resizing, so it will
"fix and fill" the fb_var_screeninfo independently.

Cc: stable <stable@vger.kernel.org> # after 5.15-rc2 is out, give it time to bake
Reported-and-tested-by: syzbot+858dc7a2f7ef07c2c219@syzkaller.appspotmail.com
Signed-off-by: Igor Matheus Andrade Torrente <igormtorrente@gmail.com>
Link: https://lore.kernel.org/r/20210628134509.15895-1-igormtorrente@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

watchdog/sb_watchdog: fix compilation problem due to COMPILE_TEST

[ Upstream commit c388a18957efdf31db8e97ec4d2d4b7dc1ca9a44 ]

Compiling sb_watchdog needs to clearly define SIBYTE_HDR_FEATURES.
In arch/mips/sibyte/Platform like:

  cflags-$(CONFIG_SIBYTE_BCM112X) +=                                      \
                -I$(srctree)/arch/mips/include/asm/mach-sibyte          \
                -DSIBYTE_HDR_FEATURES=SIBYTE_HDR_FMASK_1250_112x_ALL

Otherwise, SIBYTE_HDR_FEATURES is SIBYTE_HDR_FMASK_ALL.
SIBYTE_HDR_FMASK_ALL is mean:

 #define SIBYTE_HDR_FMASK_ALL  SIBYTE_HDR_FMASK_1250_ALL | SIBYTE_HDR_FMASK_112x_ALL \
     | SIBYTE_HDR_FMASK_1480_ALL)

So, If not limited to CPU_SB1, we will get such an error:

  arch/mips/include/asm/sibyte/bcm1480_scd.h:261: error: "M_SPC_CFG_CLEAR" redefined [-Werror]
  arch/mips/include/asm/sibyte/bcm1480_scd.h:262: error: "M_SPC_CFG_ENABLE" redefined [-Werror]

Fixes: da2a68b3eb47 ("watchdog: Enable COMPILE_TEST where possible")
Signed-off-by: Jackie Liu <liuyun01@kylinos.cn>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf iostat: Fix Segmentation fault from NULL 'struct perf_counts_values *'

[ Upstream commit 4da8b121884d84476f3d50d46a471471af1aa9df ]

If the 'perf iostat' user specifies two or more iio_root_ports and also
specifies the cpu(s) by -C which is not *connected to all* the above iio
ports, the iostat_print_metric() will run into trouble:

For example:

  $ perf iostat list
  S0-uncore_iio_0<0000:16>
  S1-uncore_iio_0<0000:97> # <--- CPU 1 is located in the socket S0

  $ perf iostat 0000:16,0000:97 -C 1 -- ls
  port  Inbound Read(MB) Inbound Write(MB) Outbound Read(MB) Outbound
  Write(MB) ../perf-iostat: line 12: 104418 Segmentation fault
  (core dumped) perf stat --iostat$DELIMITER$*

The core-dump stack says, in the above corner case, the returned
(struct perf_counts_values *) count will be NULL, and the caller
iostat_print_metric() apparently doesn't not handle this case.

  433 struct perf_counts_values *count = perf_counts(evsel->counts, die, 0);
  434
  435 if (count->run && count->ena) {
  (gdb) p count
  $1 = (struct perf_counts_values *) 0x0

The deeper reason is that there are actually no statistics from the user
specified pair "iostat 0000:X, -C (disconnected) Y ", but let's fix it with
minimum cost by adding a NULL check in the user space.

Fixes: f9ed693e8bc0e7de ("perf stat: Enable iostat mode for x86 platforms")
Signed-off-by: Like Xu <likexu@tencent.com>
Cc: Alexander Antonov <alexander.antonov@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20210927081115.39568-2-likexu@tencent.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf iostat: Use system-wide mode if the target cpu_list is unspecified

[ Upstream commit e4fe5d7349e0b1c0d3da5b6b3e1efce591e85bd2 ]

An iostate use case like "perf iostat 0000:16,0000:97 -- ls" should be
implemented to work in system-wide mode to ensure that the output from
print_header() is consistent with the user documentation perf-iostat.txt,
rather than incorrectly assuming that the kernel does not support it:

 Error:
 The sys_perf_event_open() syscall returned with 22 (Invalid argument) \
 for event (uncore_iio_0/event=0x83,umask=0x04,ch_mask=0xF,fc_mask=0x07/).
 /bin/dmesg | grep -i perf may provide additional information.

This error is easily fixed by assigning system-wide mode by default
for IOSTAT_RUN only when the target cpu_list is unspecified.

Fixes: f07952b179697771 ("perf stat: Basic support for iostat in perf")
Signed-off-by: Like Xu <likexu@tencent.com>
Cc: Alexander Antonov <alexander.antonov@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20210927081115.39568-1-likexu@tencent.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf test: Fix DWARF unwind for optimized builds.

[ Upstream commit 5c34aea341b16e29fde6e6c8d4b18866cd99754d ]

To ensure the stack frames are on the stack tail calls optimizations
need to be inhibited. If your compiler supports an attribute use it,
otherwise use an asm volatile barrier.

The barrier fix was suggested here:
https://lore.kernel.org/lkml/20201028081123.GT2628@hirez.programming.kicks-ass.net/
Tested with an optimized clang build and by forcing the asm barrier
route with an optimized clang build.

A GCC bug tracking a proper disable_tail_calls is:
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=97831

Fixes: 9ae1e990f1ab ("perf tools: Remove broken __no_tail_call
       attribute")

v2. is a rebase. The original fix patch generated quite a lot of
    discussion over the right place for the fix:
    https://lore.kernel.org/lkml/20201114000803.909530-1-irogers@google.com/
    The patch reflects my preference of it being near the use, so that
    future code cleanups don't break this somewhat special usage.

Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: clang-built-linux@googlegroups.com
Link: http://lore.kernel.org/lkml/20210922173812.456348-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

HID: amd_sfh: Fix potential NULL pointer dereference

[ Upstream commit d46ef750ed58cbeeba2d9a55c99231c30a172764 ]

devm_add_action_or_reset() can suddenly invoke amd_mp2_pci_remove() at
registration that will cause NULL pointer dereference since
corresponding data is not initialized yet. The patch moves
initialization of data before devm_add_action_or_reset().

Found by Linux Driver Verification project (linuxtesting.org).

[jkosina@suse.cz: rebase]
Signed-off-by: Evgeny Novikov <novikov@ispras.ru>
Acked-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>

kasan: fix Kconfig check of CC_HAS_WORKING_NOSANITIZE_ADDRESS

[ Upstream commit fa360beac4b62d54879a88b182afef4b369c9700 ]

In the main KASAN config option CC_HAS_WORKING_NOSANITIZE_ADDRESS is
checked for instrumentation-based modes.  However, if
HAVE_ARCH_KASAN_HW_TAGS is true all modes may still be selected.

To fix, also make the software modes depend on
CC_HAS_WORKING_NOSANITIZE_ADDRESS.

Link: https://lkml.kernel.org/r/20210910084240.1215803-1-elver@google.com
Fixes: 6a63a63ff1ac ("kasan: introduce CONFIG_KASAN_HW_TAGS")
Signed-off-by: Marco Elver <elver@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Aleksandr Nogikh <nogikh@google.com>
Cc: Taras Madan <tarasmadan@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

NIOS2: fix kconfig unmet dependency warning for SERIAL_CORE_CONSOLE

[ Upstream commit adfc8f9d2f9fefd880abc82cfbf62cbfe6539c97 ]

SERIAL_CORE_CONSOLE depends on TTY so EARLY_PRINTK should also
depend on TTY so that it does not select SERIAL_CORE_CONSOLE
inadvertently.

WARNING: unmet direct dependencies detected for SERIAL_CORE_CONSOLE
  Depends on [n]: TTY [=n] && HAS_IOMEM [=y]
  Selected by [y]:
  - EARLY_PRINTK [=y]

Fixes: e8bf5bc776ed ("nios2: add early printk support")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

m68k: Update ->thread.esp0 before calling syscall_trace() in ret_from_signal

[ Upstream commit 50e43a57334400668952f8e551c9d87d3ed2dfef ]

We get there when sigreturn has performed obscene acts on kernel stack;
in particular, the location of pt_regs has shifted.  We are about to call
syscall_trace(), which might stop for tracer.  If that happens, we'd better
have task_pt_regs() returning correct result...

Fucked-up-by: Al Viro <viro@zeniv.linux.org.uk>
Fixes: bd6f56a75bb2 ("m68k: Missing syscall_trace() on sigreturn")
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Tested-by: Michael Schmitz <schmitzmic@gmail.com>
Reviewed-by: Michael Schmitz <schmitzmic@gmail.com>
Tested-by: Finn Thain <fthain@linux-m68k.org>
Link: https://lore.kernel.org/r/YP2dMWeV1LkHiOpr@zeniv-ca.linux.org.uk
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: ccp - fix resource leaks in ccp_run_aes_gcm_cmd()

[ Upstream commit 505d9dcb0f7ddf9d075e729523a33d38642ae680 ]

There are three bugs in this code:

1) If we ccp_init_data() fails for &src then we need to free aad.
   Use goto e_aad instead of goto e_ctx.
2) The label to free the &final_wa was named incorrectly as "e_tag" but
   it should have been "e_final_wa".  One error path leaked &final_wa.
3) The &tag was leaked on one error path.  In that case, I added a free
   before the goto because the resource was local to that block.

Fixes: 36cf515b9bbe ("crypto: ccp - Enable support for AES GCM on v5 CCPs")
Reported-by: "minihanshen(沈明航)" <minihanshen@tencent.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: John Allen <john.allen@amd.com>
Tested-by: John Allen <john.allen@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

s390/qeth: fix deadlock during failing recovery

[ Upstream commit d2b59bd4b06d84a4eadb520b0f71c62fe8ec0a62 ]

Commit 0b9902c1fcc5 ("s390/qeth: fix deadlock during recovery") removed
taking discipline_mutex inside qeth_do_reset(), fixing potential
deadlocks. An error path was missed though, that still takes
discipline_mutex and thus has the original deadlock potential.

Intermittent deadlocks were seen when a qeth channel path is configured
offline, causing a race between qeth_do_reset and ccwgroup_remove.
Call qeth_set_offline() directly in the qeth_do_reset() error case and
then a new variant of ccwgroup_set_offline(), without taking
discipline_mutex.

Fixes: b41b554c1ee7 ("s390/qeth: fix locking for discipline setup / removal")
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Reviewed-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

s390/qeth: Fix deadlock in remove_discipline

[ Upstream commit ee909d0b1dac8632eeb78cbf17661d6c7674bbd0 ]

Problem: qeth_close_dev_handler is a worker that tries to acquire
card->discipline_mutex via drv->set_offline() in ccwgroup_set_offline().
Since commit b41b554c1ee7
("s390/qeth: fix locking for discipline setup / removal")
qeth_remove_discipline() is called under card->discipline_mutex and
cancels the work and waits for it to finish.

STOPLAN reception with reason code IPA_RC_VEPA_TO_VEB_TRANSITION is the
only situation that schedules close_dev_work. In that situation scheduling
qeth recovery will also result in an offline interface, when resetting the
isolation mode fails, if the external switch is still set to VEB.
And since commit 0b9902c1fcc5 ("s390/qeth: fix deadlock during recovery")
qeth recovery does not aquire card->discipline_mutex anymore.

So we accept the longer pathlength of qeth_schedule_recovery in this
error situation and re-use the existing function.

As a side-benefit this changes the hwtrap to behave like during recovery
instead of like during a user-triggered set_offline.

Fixes: b41b554c1ee7 ("s390/qeth: fix locking for discipline setup / removal")
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Acked-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx4_en: Resolve bad operstate value

[ Upstream commit 72a3c58d18fd780eecd80178bb2132ce741a0a74 ]

Any link state change that's done prior to net device registration
isn't reflected on the state, thus the operational state is left
obsolete, with 'UNKNOWN' status.

To resolve the issue, query link state from FW upon open operations
to ensure operational state is updated.

Fixes: c27a02cd94d6 ("mlx4_en: Add driver for Mellanox ConnectX 10GbE NIC")
Signed-off-by: Lama Kayal <lkayal@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pinctrl: qcom: spmi-gpio: correct parent irqspec translation

[ Upstream commit d36a97736b2cc9b13db0dfdf6f32b115ec193614 ]

pmic_gpio_child_to_parent_hwirq() and
gpiochip_populate_parent_fwspec_fourcell() translate a pinctrl-
spmi-gpio irqspec to an SPMI controller irqspec.  When they do
this, they use a fixed SPMI slave ID of 0 and a fixed GPIO
peripheral offset of 0xC0 (corresponding to SPMI address 0xC000).
This translation results in an incorrect irqspec for secondary
PMICs that don't have a slave ID of 0 as well as for PMIC chips
which have GPIO peripherals located at a base address other than
0xC000.

Correct this issue by passing the slave ID of the pinctrl-spmi-
gpio device's parent in the SPMI controller irqspec and by
calculating the peripheral ID base from the device tree 'reg'
property of the pinctrl-spmi-gpio device.

Signed-off-by: David Collins <collinsd@codeaurora.org>
Signed-off-by: satya priya <skakit@codeaurora.org>
Fixes: ca69e2d165eb ("qcom: spmi-gpio: add support for hierarchical IRQ chip")
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/1631798498-10864-2-git-send-email-skakit@codeaurora.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: SOF: imx: imx8m: Bar index is only valid for IRAM and SRAM types

[ Upstream commit d9be4a88c3627c270bbe032b623dc43f3b764565 ]

i.MX8 only uses SOF_FW_BLK_TYPE_IRAM (1) and SOF_FW_BLK_TYPE_SRAM (3)
bars, everything else is left as 0 in sdev->bar[] array.

If a broken or purposefully crafted firmware image is loaded with other
types of FW_BLK_TYPE then a kernel crash can be triggered.

Make sure that only IRAM/SRAM type is converted to bar index.

Fixes: afb93d716533d ("ASoC: SOF: imx: Add i.MX8M HW support")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@gmail.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Link: https://lore.kernel.org/r/20210915122116.18317-6-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: SOF: imx: imx8: Bar index is only valid for IRAM and SRAM types

[ Upstream commit 10d93a98190aec2c3ff98d9472ab1bf0543aa02c ]

i.MX8 only uses SOF_FW_BLK_TYPE_IRAM (1) and SOF_FW_BLK_TYPE_SRAM (3)
bars, everything else is left as 0 in sdev->bar[] array.

If a broken or purposefully crafted firmware image is loaded with other
types of FW_BLK_TYPE then a kernel crash can be triggered.

Make sure that only IRAM/SRAM type is converted to bar index.

Fixes: 202acc565a1f0 ("ASoC: SOF: imx: Add i.MX8 HW support")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@gmail.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Link: https://lore.kernel.org/r/20210915122116.18317-5-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: SOF: Fix DSP oops stack dump output contents

[ Upstream commit ac4dfccb96571ca03af7cac64b7a0b2952c97f3a ]

Fix @buf arg given to hex_dump_to_buffer() and stack address used
in dump error output.

Fixes: e657c18a01c8 ('ASoC: SOF: Add xtensa support')
Signed-off-by: Yong Zhi <yong.zhi@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@gmail.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20210915063230.29711-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: elx: efct: Fix void-pointer-to-enum-cast warning for efc_nport_topology

[ Upstream commit 96fafe7c6523886308605d30ec92c7936abe7c2c ]

The kernel test robot flagged an warning for ".../efc_device.c:932:6:
warning: cast to smaller integer type 'enum efc_nport_topology' from 'void
*'"

For the topology events, the "arg" field is generically defined as a void *
and is used to pass different arguments. Most of the arguments are pointers
to data structures. But for the EFC_EVT_NPORT_TOPOLOGY_NOTIFY event, the
argument is an enum value, and the code is typecasting the void * to an
enum generating the warning.

Fix by converting the EFC_EVT_NPORT_TOPOLOGY_NOTIFY event to pass a pointer
to the enum, thus it's a straight-forward pointer dereference in the event
handler.

Link: https://lore.kernel.org/r/20210830231050.5951-1-jsmart2021@gmail.com
Fixes: 202bfdffae27 ("scsi: elx: libefc: FC node ELS and state handling")
Reported-by: kernel test robot <lkp@intel.com>
Co-developed-by: Ram Vegesna <ram.vegesna@broadcom.com>
Signed-off-by: Ram Vegesna <ram.vegesna@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: mediatek: common: handle NULL case in suspend/resume function

[ Upstream commit 1dd038522615b70f5f8945c5631e9e2fa5bd58b1 ]

When memory allocation for afe->reg_back_up fails, reg_back_up can't
be used.
Keep the suspend/resume flow but skip register backup when
afe->reg_back_up is NULL, in case illegal memory access happens.

Fixes: 283b612429a2 ("ASoC: mediatek: implement mediatek common structure")
Signed-off-by: Trevor Wu <trevor.wu@mediatek.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20210910092613.30188-1-trevor.wu@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: fsl_xcvr: register platform component before registering cpu dai

[ Upstream commit c590fa80b39287a91abeb487829f3190e7ae775f ]

There is no defer probe when adding platform component to
snd_soc_pcm_runtime(rtd), the code is in snd_soc_add_pcm_runtime()

snd_soc_register_card()
  -> snd_soc_bind_card()
    -> snd_soc_add_pcm_runtime()
      -> adding cpu dai
      -> adding codec dai
      -> adding platform component.

So if the platform component is not ready at that time, then the
sound card still registered successfully, but platform component
is empty, the sound card can't be used.

As there is defer probe checking for cpu dai component, then register
platform component before cpu dai to avoid such issue.

Fixes: 28564486866f ("ASoC: fsl_xcvr: Add XCVR ASoC CPU DAI driver")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1630665006-31437-6-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: fsl_spdif: register platform component before registering cpu dai

[ Upstream commit ee8ccc2eb5840e34fce088bdb174fd5329153ef0 ]

There is no defer probe when adding platform component to
snd_soc_pcm_runtime(rtd), the code is in snd_soc_add_pcm_runtime()

snd_soc_register_card()
  -> snd_soc_bind_card()
    -> snd_soc_add_pcm_runtime()
      -> adding cpu dai
      -> adding codec dai
      -> adding platform component.

So if the platform component is not ready at that time, then the
sound card still registered successfully, but platform component
is empty, the sound card can't be used.

As there is defer probe checking for cpu dai component, then register
platform component before cpu dai to avoid such issue.

Fixes: a2388a498ad2 ("ASoC: fsl: Add S/PDIF CPU DAI driver")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1630665006-31437-5-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: fsl_micfil: register platform component before registering cpu dai

[ Upstream commit 0adf292069dcca8bab76a603251fcaabf77468ca ]

There is no defer probe when adding platform component to
snd_soc_pcm_runtime(rtd), the code is in snd_soc_add_pcm_runtime()

snd_soc_register_card()
  -> snd_soc_bind_card()
    -> snd_soc_add_pcm_runtime()
      -> adding cpu dai
      -> adding codec dai
      -> adding platform component.

So if the platform component is not ready at that time, then the
sound card still registered successfully, but platform component
is empty, the sound card can't be used.

As there is defer probe checking for cpu dai component, then register
platform component before cpu dai to avoid such issue.

Fixes: 47a70e6fc9a8 ("ASoC: Add MICFIL SoC Digital Audio Interface driver.")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1630665006-31437-4-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: fsl_esai: register platform component before registering cpu dai

[ Upstream commit f12ce92e98b21c1fc669cd74e12c54a0fe3bc2eb ]

There is no defer probe when adding platform component to
snd_soc_pcm_runtime(rtd), the code is in snd_soc_add_pcm_runtime()

snd_soc_register_card()
  -> snd_soc_bind_card()
    -> snd_soc_add_pcm_runtime()
      -> adding cpu dai
      -> adding codec dai
      -> adding platform component.

So if the platform component is not ready at that time, then the
sound card still registered successfully, but platform component
is empty, the sound card can't be used.

As there is defer probe checking for cpu dai component, then register
platform component before cpu dai to avoid such issue.

Fixes: 43d24e76b698 ("ASoC: fsl_esai: Add ESAI CPU DAI driver")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1630665006-31437-3-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: fsl_sai: register platform component before registering cpu dai

[ Upstream commit 9c3ad33b5a412d8bc0a377e7cd9baa53ed52f22d ]

There is no defer probe when adding platform component to
snd_soc_pcm_runtime(rtd), the code is in snd_soc_add_pcm_runtime()

snd_soc_register_card()
  -> snd_soc_bind_card()
    -> snd_soc_add_pcm_runtime()
      -> adding cpu dai
      -> adding codec dai
      -> adding platform component.

So if the platform component is not ready at that time, then the
sound card still registered successfully, but platform component
is empty, the sound card can't be used.

As there is defer probe checking for cpu dai component, then register
platform component before cpu dai to avoid such issue.

Fixes: 435508214942 ("ASoC: Add SAI SoC Digital Audio Interface driver")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1630665006-31437-2-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: s5p-jpeg: rename JPEG marker constants to prevent build warnings

[ Upstream commit 3ad02c27d89d72b3b49ac51899144b7d0942f05f ]

The use of a macro named 'RST' conflicts with one of the same name
in arch/mips/include/asm/mach-rc32434/rb.h. This causes build
warnings on some MIPS builds.

Change the names of the JPEG marker constants to be in their own
namespace to fix these build warnings and to prevent other similar
problems in the future.

Fixes these build warnings:

In file included from ../drivers/media/platform/s5p-jpeg/jpeg-hw-exynos3250.c:14:
../drivers/media/platform/s5p-jpeg/jpeg-core.h:43: warning: "RST" redefined
   43 | #define RST                             0xd0
      |
../arch/mips/include/asm/mach-rc32434/rb.h:13: note: this is the location of the previous definition
   13 | #define RST             (1 << 15)

In file included from ../drivers/media/platform/s5p-jpeg/jpeg-hw-s5p.c:13:
../drivers/media/platform/s5p-jpeg/jpeg-core.h:43: warning: "RST" redefined
   43 | #define RST                             0xd0
../arch/mips/include/asm/mach-rc32434/rb.h:13: note: this is the location of the previous definition
   13 | #define RST             (1 << 15)

In file included from ../drivers/media/platform/s5p-jpeg/jpeg-hw-exynos4.c:12:
../drivers/media/platform/s5p-jpeg/jpeg-core.h:43: warning: "RST" redefined
   43 | #define RST                             0xd0
../arch/mips/include/asm/mach-rc32434/rb.h:13: note: this is the location of the previous definition
   13 | #define RST             (1 << 15)

In file included from ../drivers/media/platform/s5p-jpeg/jpeg-core.c:31:
../drivers/media/platform/s5p-jpeg/jpeg-core.h:43: warning: "RST" redefined
   43 | #define RST                             0xd0
../arch/mips/include/asm/mach-rc32434/rb.h:13: note: this is the location of the previous definition
   13 | #define RST             (1 << 15)

Also update the kernel-doc so that the word "marker" is not
repeated.

Link: https://lore.kernel.org/linux-media/20210907044022.30602-1-rdunlap@infradead.org
Fixes: bb677f3ac434 ("[media] Exynos4 JPEG codec v4l2 driver")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Andrzej Pietrasiewicz <andrzejtp2010@gmail.com>
Cc: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Cc: Sylwester Nawrocki <s.nawrocki@samsung.com>
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: cedrus: Fix SUNXI tile size calculation

[ Upstream commit 132c88614f2b3548cd3c8979a434609019db4151 ]

Tiled formats requires full rows being allocated (even for Chroma
planes). When the number of Luma tiles is odd, we need to round up
to twice the tile width in order to roundup the number of Chroma
tiles.

This was notice with a crash running BA1_FT_C compliance test using
sunxi tiles using GStreamer. Cedrus driver would allocate 9 rows for
Luma, but only 4.5 rows for Chroma, causing userspace to crash.

Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Fixes: 50e761516f2b8 ("media: platform: Add Cedrus VPU decoder driver")
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: hantro: Fix check for single irq

[ Upstream commit 31692ab9a9ef0119959f66838de74eeb37490c8d ]

Some cores use only one interrupt and in such case interrupt name in DT
is not needed. Driver supposedly accounted that, but due to the wrong
field check it never worked. Fix that.

Fixes: 18d6c8b7b4c9 ("media: hantro: add fallback handling for single irq/clk")
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Linux 5.14.9

Link: https://lore.kernel.org/r/20210927170233.453060397@linuxfoundation.org
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Fox Chen <foxhlchen@gmail.com>
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/20210928071739.782455217@linuxfoundation.org
Tested-by: Fox Chen <foxhlchen@gmail.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Salvatore Bonaccorso <carnil@debian.org>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: gadget: f_uac2: Populate SS descriptors' wBytesPerInterval

commit f0e8a206a2a53a919e1709c654cb65d519f7befb upstream.

For Isochronous endpoints, the SS companion descriptor's
wBytesPerInterval field is required to reserve bus time in order
to transmit the required payload during the service interval.
If left at 0, the UAC2 function is unable to transact data on its
playback or capture endpoints in SuperSpeed mode.

Since f_uac2 currently does not support any bursting this value can
be exactly equal to the calculated wMaxPacketSize.

Tested with Windows 10 as a host.

Fixes: f8cb3d556be3 ("usb: f_uac2: adds support for SS and SSP")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Jack Pham <jackp@codeaurora.org>
Link: https://lore.kernel.org/r/20210909174811.12534-3-jackp@codeaurora.org
[jackp: Backport to 5.14 with minor conflict resolution]
Signed-off-by: Jack Pham <jackp@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: gadget: f_uac2: Add missing companion descriptor for feedback EP

commit 595091a1426a3b2625dad322f69fe569dc9d8943 upstream.

The f_uac2 function fails to enumerate when connected in SuperSpeed
due to the feedback endpoint missing the companion descriptor.
Add a new ss_epin_fback_desc_comp descriptor and append it behind the
ss_epin_fback_desc both in the static definition of the ss_audio_desc
structure as well as its dynamic construction in setup_headers().

Fixes: 24f779dac8f3 ("usb: gadget: f_uac2/u_audio: add feedback endpoint support")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Jack Pham <jackp@codeaurora.org>
Link: https://lore.kernel.org/r/20210909174811.12534-2-jackp@codeaurora.org
[jackp: Backport to 5.14 with minor conflict resolution]
Signed-off-by: Jack Pham <jackp@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nvmet: fix a width vs precision bug in nvmet_subsys_attr_serial_show()

commit 0bd46e22c5ec3dbfb81b60de475151e3f6b411c2 upstream.

This was intended to limit the number of characters printed from
"subsys->serial" to NVMET_SN_MAX_SIZE.  But accidentally the width
specifier was used instead of the precision specifier so it only
affects the alignment and not the number of characters printed.

Fixes: f04064814c2a ("nvmet: fixup buffer overrun in nvmet_subsys_attr_serial()")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

qnx4: work around gcc false positive warning bug

commit d5f6545934c47e97c0b48a645418e877b452a992 upstream.

In commit b7213ffa0e58 ("qnx4: avoid stringop-overread errors") I tried
to teach gcc about how the directory entry structure can be two
different things depending on a status flag.  It made the code clearer,
and it seemed to make gcc happy.

However, Arnd points to a gcc bug, where despite using two different
members of a union, gcc then gets confused, and uses the size of one of
the members to decide if a string overrun happens.  And not necessarily
the rigth one.

End result: with some configurations, gcc-11 will still complain about
the source buffer size being overread:

  fs/qnx4/dir.c: In function 'qnx4_readdir':
  fs/qnx4/dir.c:76:32: error: 'strnlen' specified bound [16, 48] exceeds source size 1 [-Werror=stringop-overread]
     76 |                         size = strnlen(name, size);
        |                                ^~~~~~~~~~~~~~~~~~~
  fs/qnx4/dir.c:26:22: note: source object declared here
     26 |                 char de_name;
        |                      ^~~~~~~

because gcc will get confused about which union member entry is actually
getting accessed, even when the source code is very clear about it.  Gcc
internally will have combined two "redundant" pointers (pointing to
different union elements that are at the same offset), and takes the
size checking from one or the other - not necessarily the right one.

This is clearly a gcc bug, but we can work around it fairly easily.  The
biggest thing here is the big honking comment about why we do what we
do.

Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=99578#c6
Reported-and-tested-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xen/balloon: fix balloon kthread freezing

commit 96f5bd03e1be606987644b71899ea56a8d05f825 upstream.

Commit 8480ed9c2bbd56 ("xen/balloon: use a kernel thread instead a
workqueue") switched the Xen balloon driver to use a kernel thread.
Unfortunately the patch omitted to call try_to_freeze() or to use
wait_event_freezable_timeout(), causing a system suspend to fail.

Fixes: 8480ed9c2bbd56 ("xen/balloon: use a kernel thread instead a workqueue")
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lore.kernel.org/r/20210920100345.21939-1-jgross@suse.com
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

software node: balance refcount for managed software nodes

commit 5aeb05b27f81269a2bf2e15eab9fc0f9a400d3a8 upstream.

software_node_notify(), on KOBJ_REMOVE drops the refcount twice on managed
software nodes, thus leading to underflow errors. Balance the refcount by
bumping it in the device_create_managed_software_node() function.

The error [1] was encountered after adding a .shutdown() op to our
fsl-mc-bus driver.

[1]
pc : refcount_warn_saturate+0xf8/0x150
lr : refcount_warn_saturate+0xf8/0x150
sp : ffff80001009b920
x29: ffff80001009b920 x28: ffff1a2420318000 x27: 0000000000000000
x26: ffffccac15e7a038 x25: 0000000000000008 x24: ffffccac168e0030
x23: ffff1a2428a82000 x22: 0000000000080000 x21: ffff1a24287b5000
x20: 0000000000000001 x19: ffff1a24261f4400 x18: ffffffffffffffff
x17: 6f72645f726f7272 x16: 0000000000000000 x15: ffff80009009b607
x14: 0000000000000000 x13: ffffccac16602670 x12: 0000000000000a17
x11: 000000000000035d x10: ffffccac16602670 x9 : ffffccac16602670
x8 : 00000000ffffefff x7 : ffffccac1665a670 x6 : ffffccac1665a670
x5 : 0000000000000000 x4 : 0000000000000000 x3 : 00000000ffffffff
x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff1a2420318000
Call trace:
 refcount_warn_saturate+0xf8/0x150
 kobject_put+0x10c/0x120
 software_node_notify+0xd8/0x140
 device_platform_notify+0x4c/0xb4
 device_del+0x188/0x424
 fsl_mc_device_remove+0x2c/0x4c
 rebofind sp.c__fsl_mc_device_remove+0x14/0x2c
 device_for_each_child+0x5c/0xac
 dprc_remove+0x9c/0xc0
 fsl_mc_driver_remove+0x28/0x64
 __device_release_driver+0x188/0x22c
 device_release_driver+0x30/0x50
 bus_remove_device+0x128/0x134
 device_del+0x16c/0x424
 fsl_mc_bus_remove+0x8c/0x114
 fsl_mc_bus_shutdown+0x14/0x20
 platform_shutdown+0x28/0x40
 device_shutdown+0x15c/0x330
 __do_sys_reboot+0x218/0x2a0
 __arm64_sys_reboot+0x28/0x34
 invoke_syscall+0x48/0x114
 el0_svc_common+0x40/0xdc
 do_el0_svc+0x2c/0x94
 el0_svc+0x2c/0x54
 el0t_64_sync_handler+0xa8/0x12c
 el0t_64_sync+0x198/0x19c
---[ end trace 32eb1c71c7d86821 ]---

Fixes: 151f6ff78cdf ("software node: Provide replacement for device_add_properties()")
Reported-by: Jon Nettleton <jon@solid-run.com>
Suggested-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Cc: 5.12+ <stable@vger.kernel.org> # 5.12+
[ rjw: Fix up the software_node_notify() invocation ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: cp210x: fix dropped characters with CP2102

commit c32dfec6c1c36bbbcd5d33e949d99aeb215877ec upstream.

Some CP2102 do not support event-insertion mode but return no error when
attempting to enable it.

This means that any event escape characters in the input stream will not
be escaped by the device and consequently regular data may be
interpreted as escape sequences and be removed from the stream by the
driver.

The reporter's device has batch number DCL00X etched into it and as
discovered by the SHA2017 Badge team, counterfeit devices with that
marking can be detected by sending malformed vendor requests. [1][2]

Tests confirm that the possibly counterfeit CP2102 returns a single byte
in response to a malformed two-byte part-number request, while an
original CP2102 returns two bytes. Assume that every CP2102 that behaves
this way also does not support event-insertion mode (e.g. cannot report
parity errors).

[1] https://mobile.twitter.com/sha2017badge/status/1167902087289532418
[2] https://hackaday.com/2017/08/14/hands-on-with-the-shacamp-2017-badge/#comment-3903376

Reported-by: Malte Di Donato <malte@neo-soft.org>
Tested-by: Malte Di Donato <malte@neo-soft.org>
Fixes: a7207e9835a4 ("USB: serial: cp210x: add support for line-status events")
Cc: stable@vger.kernel.org # 5.9
Link: https://lore.kernel.org/r/20210922113100.20888-1-johan@kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: add MTE supported check to thread switching and syscall entry/exit

commit 8c8a3b5bd960cd88f7655b5251dc28741e11f139 upstream.

This lets us avoid doing unnecessary work on hardware that does not
support MTE, and will allow us to freely use MTE instructions in the
code called by mte_thread_switch().

Since this would mean that we do a redundant check in
mte_check_tfsr_el1(), remove it and add two checks now required in its
callers. This also avoids an unnecessary DSB+ISB sequence on the syscall
exit path for hardware not supporting MTE.

Fixes: 65812c6921cc ("arm64: mte: Enable async tag check fault")
Cc: <stable@vger.kernel.org> # 5.13.x
Signed-off-by: Peter Collingbourne <pcc@google.com>
Link: https://linux-review.googlesource.com/id/I02fd000d1ef2c86c7d2952a7f099b254ec227a5d
Link: https://lore.kernel.org/r/20210915190336.398390-1-pcc@google.com
[catalin.marinas@arm.com: adjust the commit log slightly]
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

irqchip/armada-370-xp: Fix ack/eoi breakage

commit 2a7313dc81e88adc7bb09d0f056985fa8afc2b89 upstream.

When converting the driver to using handle_percpu_devid_irq,
we forgot to repaint the irq_eoi() callback into irq_ack(),
as handle_percpu_devid_fasteoi_ipi() was actually using EOI
really early in the handling. Yes this was a stupid idea.

Fix this by using the HW ack method as irq_ack().

Fixes: e52e73b7e9f7 ("irqchip/armada-370-xp: Make IPIs use handle_percpu_devid_irq()")
Reported-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Tested-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: Valentin Schneider <valentin.schneider@arm.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/87tuiexq5f.fsf@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

thermal/drivers/int340x: Do not set a wrong tcc offset on resume

commit 8b4bd256674720709a9d858a219fcac6f2f253b5 upstream.

After upgrading to Linux 5.13.3 I noticed my laptop would shutdown due
to overheat (when it should not). It turned out this was due to commit
fe6a6de6692e ("thermal/drivers/int340x/processor_thermal: Fix tcc setting").

What happens is this drivers uses a global variable to keep track of the
tcc offset (tcc_offset_save) and uses it on resume. The issue is this
variable is initialized to 0, but is only set in
tcc_offset_degree_celsius_store, i.e. when the tcc offset is explicitly
set by userspace. If that does not happen, the resume path will set the
offset to 0 (in my case the h/w default being 3, the offset would become
too low after a suspend/resume cycle).

The issue did not arise before commit fe6a6de6692e, as the function
setting the offset would return if the offset was 0. This is no longer
the case (rightfully).

Fix this by not applying the offset if it wasn't saved before, reverting
back to the old logic. A better approach will come later, but this will
be easier to apply to stable kernels.

The logic to restore the offset after a resume was there long before
commit fe6a6de6692e, but as a value of 0 was considered invalid I'm
referencing the commit that made the issue possible in the Fixes tag
instead.

Fixes: fe6a6de6692e ("thermal/drivers/int340x/processor_thermal: Fix tcc setting")
Cc: stable@vger.kernel.org
Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Tested-by: Srinivas Pandruvada <srinivas.pI andruvada@linux.intel.com>
Link: https://lore.kernel.org/r/20210909085613.5577-2-atenart@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/setup: Call early_reserve_memory() earlier

commit 8aa83e6395ce047a506f0b16edca45f36c1ae7f8 upstream.

Commit in Fixes introduced early_reserve_memory() to do all needed
initial memblock_reserve() calls in one function. Unfortunately, the call
of early_reserve_memory() is done too late for Xen dom0, as in some
cases a Xen hook called by e820__memory_setup() will need those memory
reservations to have happened already.

Move the call of early_reserve_memory() before the call of
e820__memory_setup() in order to avoid such problems.

Fixes: a799c2bd29d1 ("x86/setup: Consolidate early memory reservations")
Reported-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Tested-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20210920120421.29276-1-jgross@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

EDAC/dmc520: Assign the proper type to dimm->edac_mode

commit 54607282fae6148641a08d81a6e0953b541249c7 upstream.

dimm->edac_mode contains values of type enum edac_type - not the
corresponding capability flags. Fix that.

Fixes: 1088750d7839 ("EDAC: Add EDAC driver for DMC520")
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20210916085258.7544-1-bp@alien8.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

EDAC/synopsys: Fix wrong value type assignment for edac_mode

commit 5297cfa6bdf93e3889f78f9b482e2a595a376083 upstream.

dimm->edac_mode contains values of type enum edac_type - not the
corresponding capability flags. Fix that.

Issue caught by Coverity check "enumerated type mixed with another
type."

 [ bp: Rewrite commit message, add tags. ]

Fixes: ae9b56e3996d ("EDAC, synps: Add EDAC support for zynq ddr ecc controller")
Signed-off-by: Sai Krishna Potthuri <lakshmi.sai.krishna.potthuri@xilinx.com>
Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20210818072315.15149-1-shubhrajyoti.datta@xilinx.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert drm/vc4 hdmi runtime PM changes

[ Upstream commit b1044a9b8100a0cc5c9d2e1e2f9ca4bb8e32b23a ]

This reverts commits

  9984d6664ce9 ("drm/vc4: hdmi: Make sure the controller is powered in detect")
  411efa18e4b0 ("drm/vc4: hdmi: Move the HSM clock enable to runtime_pm")

as Michael Stapelberg reports that the new runtime PM changes cause his
Raspberry Pi 3 to hang on boot, probably due to interactions with other
changes in the DRM tree (because a bisect points to the merge in commit
e058a84bfddc: "Merge tag 'drm-next-2021-07-01' of git://.../drm").

Revert these two commits until it's been resolved.

Link: https://lore.kernel.org/all/871r5mp7h2.fsf@midna.i-did-not-set--mail-host-address--so-tickle-me/
Reported-and-tested-by: Michael Stapelberg <michael@stapelberg.ch>
Cc: Maxime Ripard <maxime@cerno.tech>
Cc: Dave Stevenson <dave.stevenson@raspberrypi.com>
Cc: Dave Airlie <airlied@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

libperf evsel: Make use of FD robust.

[ Upstream commit aba5daeb645181ee5a046bc00c231fd045882aaa ]

FD uses xyarray__entry that may return NULL if an index is out of
bounds. If NULL is returned then a segv happens as FD unconditionally
dereferences the pointer. This was happening in a case of with perf
iostat as shown below. The fix is to make FD an "int*" rather than an
int and handle the NULL case as either invalid input or a closed fd.

  $ sudo gdb --args perf stat --iostat  list
  ...
  Breakpoint 1, perf_evsel__alloc_fd (evsel=0x5555560951a0, ncpus=1, nthreads=1) at evsel.c:50
  50      {
  (gdb) bt
   #0  perf_evsel__alloc_fd (evsel=0x5555560951a0, ncpus=1, nthreads=1) at evsel.c:50
   #1  0x000055555585c188 in evsel__open_cpu (evsel=0x5555560951a0, cpus=0x555556093410,
      threads=0x555556086fb0, start_cpu=0, end_cpu=1) at util/evsel.c:1792
   #2  0x000055555585cfb2 in evsel__open (evsel=0x5555560951a0, cpus=0x0, threads=0x555556086fb0)
      at util/evsel.c:2045
   #3  0x000055555585d0db in evsel__open_per_thread (evsel=0x5555560951a0, threads=0x555556086fb0)
      at util/evsel.c:2065
   #4  0x00005555558ece64 in create_perf_stat_counter (evsel=0x5555560951a0,
      config=0x555555c34700 <stat_config>, target=0x555555c2f1c0 <target>, cpu=0) at util/stat.c:590
   #5  0x000055555578e927 in __run_perf_stat (argc=1, argv=0x7fffffffe4a0, run_idx=0)
      at builtin-stat.c:833
   #6  0x000055555578f3c6 in run_perf_stat (argc=1, argv=0x7fffffffe4a0, run_idx=0)
      at builtin-stat.c:1048
   #7  0x0000555555792ee5 in cmd_stat (argc=1, argv=0x7fffffffe4a0) at builtin-stat.c:2534
   #8  0x0000555555835ed3 in run_builtin (p=0x555555c3f540 <commands+288>, argc=3,
      argv=0x7fffffffe4a0) at perf.c:313
   #9  0x0000555555836154 in handle_internal_command (argc=3, argv=0x7fffffffe4a0) at perf.c:365
   #10 0x000055555583629f in run_argv (argcp=0x7fffffffe2ec, argv=0x7fffffffe2e0) at perf.c:409
   #11 0x0000555555836692 in main (argc=3, argv=0x7fffffffe4a0) at perf.c:539
  ...
  (gdb) c
  Continuing.
  Error:
  The sys_perf_event_open() syscall returned with 22 (Invalid argument) for event (uncore_iio_0/event=0x83,umask=0x04,ch_mask=0xF,fc_mask=0x07/).
  /bin/dmesg | grep -i perf may provide additional information.

  Program received signal SIGSEGV, Segmentation fault.
  0x00005555559b03ea in perf_evsel__close_fd_cpu (evsel=0x5555560951a0, cpu=1) at evsel.c:166
  166                     if (FD(evsel, cpu, thread) >= 0)

v3. fixes a bug in perf_evsel__run_ioctl where the sense of a branch was
    backward.

Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20210918054440.2350466-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

spi: Fix tegra20 build with CONFIG_PM=n

[ Upstream commit efafec27c5658ed987e720130772f8933c685e87 ]

Without CONFIG_PM enabled, the SET_RUNTIME_PM_OPS() macro ends up being
empty, and the only use of tegra_slink_runtime_{resume,suspend} goes
away, resulting in

  drivers/spi/spi-tegra20-slink.c:1200:12: error: ‘tegra_slink_runtime_resume’ defined but not used [-Werror=unused-function]
   1200 | static int tegra_slink_runtime_resume(struct device *dev)
        |            ^~~~~~~~~~~~~~~~~~~~~~~~~~
  drivers/spi/spi-tegra20-slink.c:1188:12: error: ‘tegra_slink_runtime_suspend’ defined but not used [-Werror=unused-function]
   1188 | static int tegra_slink_runtime_suspend(struct device *dev)
        |            ^~~~~~~~~~~~~~~~~~~~~~~~~~~

mark the functions __maybe_unused to make the build happy.

This hits the alpha allmodconfig build (and others).

Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: 6pack: Fix tx timeout and slot time

[ Upstream commit 3c0d2a46c0141913dc6fd126c57d0615677d946e ]

tx timeout and slot time are currently specified in units of HZ.  On
Alpha, HZ is defined as 1024.  When building alpha:allmodconfig, this
results in the following error message.

  drivers/net/hamradio/6pack.c: In function 'sixpack_open':
  drivers/net/hamradio/6pack.c:71:41: error:
   unsigned conversion from 'int' to 'unsigned char'
   changes value from '256' to '0'

In the 6PACK protocol, tx timeout is specified in units of 10 ms and
transmitted over the wire:

    https://www.linux-ax25.org/wiki/6PACK

Defining a value dependent on HZ doesn't really make sense, and
presumably comes from the (very historical) situation where HZ was
originally 100.

Note that the SIXP_SLOTTIME use explicitly is about 10ms granularity:

        mod_timer(&sp->tx_t, jiffies + ((when + 1) * HZ) / 100);

and the SIXP_TXDELAY walue is sent as a byte over the wire.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

alpha: Declare virt_to_phys and virt_to_bus parameter as pointer to volatile

[ Upstream commit 35a3f4ef0ab543daa1725b0c963eb8c05e3376f8 ]

Some drivers pass a pointer to volatile data to virt_to_bus() and
virt_to_phys(), and that works fine.  One exception is alpha.  This
results in a number of compile errors such as

  drivers/net/wan/lmc/lmc_main.c: In function 'lmc_softreset':
  drivers/net/wan/lmc/lmc_main.c:1782:50: error:
passing argument 1 of 'virt_to_bus' discards 'volatile'
qualifier from pointer target type

  drivers/atm/ambassador.c: In function 'do_loader_command':
  drivers/atm/ambassador.c:1747:58: error:
passing argument 1 of 'virt_to_bus' discards 'volatile'
qualifier from pointer target type

Declare the parameter of virt_to_phys and virt_to_bus as pointer to
volatile to fix the problem.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: Mark __stack_chk_guard as __ro_after_init

[ Upstream commit 9fcb2e93f41c07a400885325e7dbdfceba6efaec ]

__stack_chk_guard is setup once while init stage and never changed
after that.

Although the modification of this variable at runtime will usually
cause the kernel to crash (so does the attacker), it should be marked
as __ro_after_init, and it should not affect performance if it is
placed in the ro_after_init section.

Signed-off-by: Dan Li <ashimida@linux.alibaba.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/1631612642-102881-1-git-send-email-ashimida@linux.alibaba.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

amd/display: enable panel orientation quirks

[ Upstream commit cd51a57eb59fd56f3fe7ce9cadef444451bcf804 ]

This patch allows panel orientation quirks from DRM core to be
used. They attach a DRM connector property "panel orientation"
which indicates in which direction the panel has been mounted.
Some machines have the internal screen mounted with a rotation.

Since the panel orientation quirks need the native mode from the
EDID, check for it in amdgpu_dm_connector_ddc_get_modes.

Signed-off-by: Simon Ser <contact@emersion.fr>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Harry Wentland <hwentlan@amd.com>
Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/display: Link training retry fix for abort case

[ Upstream commit 71ae30997a8f1791835167d3ceb8d1fab32407db ]

[Why]
If link training is aborted, it shall be retried if sink is present.

[How]
Check hpd status to find out whether sink is present or not. If sink is
present, then link training shall be tried again with same settings.
Otherwise, link training shall be aborted.

Reviewed-by: Jimmy Kizito <Jimmy.Kizito@amd.com>
Acked-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/display: Fix unstable HPCP compliance on Chrome Barcelo

[ Upstream commit 4e00a434a08e0654a4dd9347485d9ec85deee1ef ]

[Why]
Intermittently, there presents two occurrences of 0 stream
commits in a single HPD event. Current HDCP sequence does
not consider such scenerio, and will thus disable HDCP.

[How]
Add condition check to include stream remove and re-enable
case for HDCP enable.

Reviewed-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Acked-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amdkfd: make needs_pcie_atomics FW-version dependent

[ Upstream commit fb932dfeb87411a8a01c995576198bfc302df339 ]

On some GPUs the PCIe atomic requirement for KFD depends on the MEC
firmware version. Add a firmware version check for this. The minimum
firmware version that works without atomics can be updated in the
device_info structure for each GPU type.

Move PCIe atomic detection from kgd2kfd_probe into kgd2kfd_device_init
because the MEC firmware is not loaded yet at the probe stage.

Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

parisc: Use absolute_pointer() to define PAGE0

[ Upstream commit 90cc7bed1ed19f869ae7221a6b41887fe762a6a3 ]

Use absolute_pointer() wrapper for PAGE0 to avoid this compiler warning:

  arch/parisc/kernel/setup.c: In function 'start_parisc':
  error: '__builtin_memcmp_eq' specified bound 8 exceeds source size 0

Signed-off-by: Helge Deller <deller@gmx.de>
Co-Developed-by: Guenter Roeck <linux@roeck-us.net>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

qnx4: avoid stringop-overread errors

[ Upstream commit b7213ffa0e585feb1aee3e7173e965e66ee0abaa ]

The qnx4 directory entries are 64-byte blocks that have different
contents depending on the a status byte that is in the last byte of the
block.

In particular, a directory entry can be either a "link info" entry with
a 48-byte name and pointers to the real inode information, or an "inode
entry" with a smaller 16-byte name and the full inode information.

But the code was written to always just treat the directory name as if
it was part of that "inode entry", and just extend the name to the
longer case if the status byte said it was a link entry.

That work just fine and gives the right results, but now that gcc is
tracking data structure accesses much more, the code can trigger a
compiler error about using up to 48 bytes (the long name) in a structure
that only has that shorter name in it:

   fs/qnx4/dir.c: In function ‘qnx4_readdir’:
   fs/qnx4/dir.c:51:32: error: ‘strnlen’ specified bound 48 exceeds source size 16 [-Werror=stringop-overread]
      51 |                         size = strnlen(de->di_fname, size);
         |                                ^~~~~~~~~~~~~~~~~~~~~~~~~~~
   In file included from fs/qnx4/qnx4.h:3,
                    from fs/qnx4/dir.c:16:
   include/uapi/linux/qnx4_fs.h:45:25: note: source object declared here
      45 |         char            di_fname[QNX4_SHORT_NAME_MAX];
         |                         ^~~~~~~~

which is because the source code doesn't really make this whole "one of
two different types" explicit.

Fix this by introducing a very explicit union of the two types, and
basically explaining to the compiler what is really going on.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

sparc: avoid stringop-overread errors

[ Upstream commit fc7c028dcdbfe981bca75d2a7b95f363eb691ef3 ]

The sparc mdesc code does pointer games with 'struct mdesc_hdr', but
didn't describe to the compiler how that header is then followed by the
data that the header describes.

As a result, gcc is now unhappy since it does stricter pointer range
tracking, and doesn't understand about how these things work.  This
results in various errors like:

    arch/sparc/kernel/mdesc.c: In function ‘mdesc_node_by_name’:
    arch/sparc/kernel/mdesc.c:647:22: error: ‘strcmp’ reading 1 or more bytes from a region of size 0 [-Werror=stringop-overread]
      647 |                 if (!strcmp(names + ep[ret].name_offset, name))
          |                      ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

which are easily avoided by just describing 'struct mdesc_hdr' better,
and making the node_block() helper function look into that unsized
data[] that follows the header.

This makes the sparc64 build happy again at least for my cross-compiler
version (gcc version 11.2.1).

Link: https://lore.kernel.org/lkml/CAHk-=wi4NW3NC0xWykkw=6LnjQD6D_rtRtxY9g8gQAJXtQMi8A@mail.gmail.com/
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: i825xx: Use absolute_pointer for memcpy from fixed memory location

[ Upstream commit dff2d13114f0beec448da9b3716204eb34b0cf41 ]

gcc 11.x reports the following compiler warning/error.

  drivers/net/ethernet/i825xx/82596.c: In function 'i82596_probe':
  arch/m68k/include/asm/string.h:72:25: error:
'__builtin_memcpy' reading 6 bytes from a region of size 0 [-Werror=stringop-overread]

Use absolute_pointer() to work around the problem.

Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

compiler.h: Introduce absolute_pointer macro

[ Upstream commit f6b5f1a56987de837f8e25cd560847106b8632a8 ]

absolute_pointer() disassociates a pointer from its originating symbol
type and context. Use it to prevent compiler warnings/errors such as

  drivers/net/ethernet/i825xx/82596.c: In function 'i82596_probe':
  arch/m68k/include/asm/string.h:72:25: error:
'__builtin_memcpy' reading 6 bytes from a region of size 0 [-Werror=stringop-overread]

Such warnings may be reported by gcc 11.x for string and memory
operations on fixed addresses.

Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

blk-cgroup: fix UAF by grabbing blkcg lock before destroying blkg pd

[ Upstream commit 858560b27645e7e97aca37ee8f232cccd658fbd2 ]

KASAN reports a use-after-free report when doing fuzz test:

[693354.104835] ==================================================================
[693354.105094] BUG: KASAN: use-after-free in bfq_io_set_weight_legacy+0xd3/0x160
[693354.105336] Read of size 4 at addr ffff888be0a35664 by task sh/1453338

[693354.105607] CPU: 41 PID: 1453338 Comm: sh Kdump: loaded Not tainted 4.18.0-147
[693354.105610] Hardware name: Huawei 2288H V5/BC11SPSCB0, BIOS 0.81 07/02/2018
[693354.105612] Call Trace:
[693354.105621]  dump_stack+0xf1/0x19b
[693354.105626]  ? show_regs_print_info+0x5/0x5
[693354.105634]  ? printk+0x9c/0xc3
[693354.105638]  ? cpumask_weight+0x1f/0x1f
[693354.105648]  print_address_description+0x70/0x360
[693354.105654]  kasan_report+0x1b2/0x330
[693354.105659]  ? bfq_io_set_weight_legacy+0xd3/0x160
[693354.105665]  ? bfq_io_set_weight_legacy+0xd3/0x160
[693354.105670]  bfq_io_set_weight_legacy+0xd3/0x160
[693354.105675]  ? bfq_cpd_init+0x20/0x20
[693354.105683]  cgroup_file_write+0x3aa/0x510
[693354.105693]  ? ___slab_alloc+0x507/0x540
[693354.105698]  ? cgroup_file_poll+0x60/0x60
[693354.105702]  ? 0xffffffff89600000
[693354.105708]  ? usercopy_abort+0x90/0x90
[693354.105716]  ? mutex_lock+0xef/0x180
[693354.105726]  kernfs_fop_write+0x1ab/0x280
[693354.105732]  ? cgroup_file_poll+0x60/0x60
[693354.105738]  vfs_write+0xe7/0x230
[693354.105744]  ksys_write+0xb0/0x140
[693354.105749]  ? __ia32_sys_read+0x50/0x50
[693354.105760]  do_syscall_64+0x112/0x370
[693354.105766]  ? syscall_return_slowpath+0x260/0x260
[693354.105772]  ? do_page_fault+0x9b/0x270
[693354.105779]  ? prepare_exit_to_usermode+0xf9/0x1a0
[693354.105784]  ? enter_from_user_mode+0x30/0x30
[693354.105793]  entry_SYSCALL_64_after_hwframe+0x65/0xca

[693354.105875] Allocated by task 1453337:
[693354.106001]  kasan_kmalloc+0xa0/0xd0
[693354.106006]  kmem_cache_alloc_node_trace+0x108/0x220
[693354.106010]  bfq_pd_alloc+0x96/0x120
[693354.106015]  blkcg_activate_policy+0x1b7/0x2b0
[693354.106020]  bfq_create_group_hierarchy+0x1e/0x80
[693354.106026]  bfq_init_queue+0x678/0x8c0
[693354.106031]  blk_mq_init_sched+0x1f8/0x460
[693354.106037]  elevator_switch_mq+0xe1/0x240
[693354.106041]  elevator_switch+0x25/0x40
[693354.106045]  elv_iosched_store+0x1a1/0x230
[693354.106049]  queue_attr_store+0x78/0xb0
[693354.106053]  kernfs_fop_write+0x1ab/0x280
[693354.106056]  vfs_write+0xe7/0x230
[693354.106060]  ksys_write+0xb0/0x140
[693354.106064]  do_syscall_64+0x112/0x370
[693354.106069]  entry_SYSCALL_64_after_hwframe+0x65/0xca

[693354.106114] Freed by task 1453336:
[693354.106225]  __kasan_slab_free+0x130/0x180
[693354.106229]  kfree+0x90/0x1b0
[693354.106233]  blkcg_deactivate_policy+0x12c/0x220
[693354.106238]  bfq_exit_queue+0xf5/0x110
[693354.106241]  blk_mq_exit_sched+0x104/0x130
[693354.106245]  __elevator_exit+0x45/0x60
[693354.106249]  elevator_switch_mq+0xd6/0x240
[693354.106253]  elevator_switch+0x25/0x40
[693354.106257]  elv_iosched_store+0x1a1/0x230
[693354.106261]  queue_attr_store+0x78/0xb0
[693354.106264]  kernfs_fop_write+0x1ab/0x280
[693354.106268]  vfs_write+0xe7/0x230
[693354.106271]  ksys_write+0xb0/0x140
[693354.106275]  do_syscall_64+0x112/0x370
[693354.106280]  entry_SYSCALL_64_after_hwframe+0x65/0xca

[693354.106329] The buggy address belongs to the object at ffff888be0a35580
                 which belongs to the cache kmalloc-1k of size 1024
[693354.106736] The buggy address is located 228 bytes inside of
                 1024-byte region [ffff888be0a35580, ffff888be0a35980)
[693354.107114] The buggy address belongs to the page:
[693354.107273] page:ffffea002f828c00 count:1 mapcount:0 mapping:ffff888107c17080 index:0x0 compound_mapcount: 0
[693354.107606] flags: 0x17ffffc0008100(slab|head)
[693354.107760] raw: 0017ffffc0008100 ffffea002fcbc808 ffffea0030bd3a08 ffff888107c17080
[693354.108020] raw: 0000000000000000 00000000001c001c 00000001ffffffff 0000000000000000
[693354.108278] page dumped because: kasan: bad access detected

[693354.108511] Memory state around the buggy address:
[693354.108671]  ffff888be0a35500: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[693354.116396]  ffff888be0a35580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[693354.124473] >ffff888be0a35600: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[693354.132421]                                                        ^
[693354.140284]  ffff888be0a35680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[693354.147912]  ffff888be0a35700: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[693354.155281] ==================================================================

blkgs are protected by both queue and blkcg locks and holding
either should stabilize them. However, the path of destroying
blkg policy data is only protected by queue lock in
blkcg_activate_policy()/blkcg_deactivate_policy(). Other tasks
can get the blkg policy data before the blkg policy data is
destroyed, and use it after destroyed, which will result in a
use-after-free.

CPU0                             CPU1
blkcg_deactivate_policy
  spin_lock_irq(&q->queue_lock)
                                 bfq_io_set_weight_legacy
                                   spin_lock_irq(&blkcg->lock)
                                   blkg_to_bfqg(blkg)
                                     pd_to_bfqg(blkg->pd[pol->plid])
                                     ^^^^^^blkg->pd[pol->plid] != NULL
                                           bfqg != NULL
  pol->pd_free_fn(blkg->pd[pol->plid])
    pd_to_bfqg(blkg->pd[pol->plid])
    bfqg_put(bfqg)
      kfree(bfqg)
  blkg->pd[pol->plid] = NULL
  spin_unlock_irq(q->queue_lock);
                                   bfq_group_set_weight(bfqg, val, 0)
                                     bfqg->entity.new_weight
                                     ^^^^^^trigger uaf here
                                   spin_unlock_irq(&blkcg->lock);

Fix by grabbing the matching blkcg lock before trying to
destroy blkg policy data.

Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Li Jinlin <lijinlin3@huawei.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20210914042605.3260596-1-lijinlin3@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

block: flush the integrity workqueue in blk_integrity_unregister

[ Upstream commit 3df49967f6f1d2121b0c27c381ca1c8386b1dab9 ]

When the integrity profile is unregistered there can still be integrity
reads queued up which could see a NULL verify_fn as shown by the race
window below:

CPU0                                    CPU1
  process_one_work                      nvme_validate_ns
    bio_integrity_verify_fn                nvme_update_ns_info
                                     nvme_update_disk_info
                                       blk_integrity_unregister
                                               ---set queue->integrity as 0
bio_integrity_process
--access bi->profile->verify_fn(bi is a pointer of queue->integity)

Before calling blk_integrity_unregister in nvme_update_disk_info, we must
make sure that there is no work item in the kintegrityd_wq. Just call
blk_flush_integrity to flush the work queue so the bug can be resolved.

Signed-off-by: Lihong Kou <koulihong@huawei.com>
[hch: split up and shortened the changelog]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Link: https://lore.kernel.org/r/20210914070657.87677-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

block: check if a profile is actually registered in blk_integrity_unregister

[ Upstream commit 783a40a1b3ac7f3714d2776fa8ac8cce3535e4f6 ]

While clearing the profile itself is harmless, we really should not clear
the stable writes flag if it wasn't set due to a registered integrity
profile.

Reported-by: Lihong Kou <koulihong@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Link: https://lore.kernel.org/r/20210914070657.87677-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/ttm: fix type mismatch error on sparc64

[ Upstream commit 3ca706c189db861b2ca2019a0901b94050ca49d8 ]

On sparc64, __fls() returns an "int", but the drm TTM code expected it
to be "unsigned long" as on x86.  As a result, on sparc (and arc, and
m68k) you get build errors because 'min()' checks that the types match.

As suggested by Linus, it can use min_t instead of min to force the type
to be "unsigned int".

Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexdeucher@gmail.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

amd/display: downgrade validation failure log level

[ Upstream commit 7bbee36d71502ab9a341505da89a017c7ae2e6b2 ]

In amdgpu_dm_atomic_check, dc_validate_global_state is called. On
failure this logs a warning to the kernel journal. However warnings
shouldn't be used for atomic test-only commit failures: user-space
might be perfoming a lot of atomic test-only commits to find the
best hardware configuration.

Downgrade the log to a regular DRM atomic message. While at it, use
the new device-aware logging infrastructure.

This fixes error messages in the kernel when running gamescope [1].

[1]: https://github.com/Plagman/gamescope/issues/245

Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Simon Ser <contact@emersion.fr>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Harry Wentland <hwentlan@amd.com>
Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

sparc32: page align size in arch_dma_alloc

[ Upstream commit 59583f747664046aaae5588d56d5954fab66cce8 ]

Commit 53b7670e5735 ("sparc: factor the dma coherent mapping into
helper") lost the page align for the calls to dma_make_coherent and
srmmu_unmapiorange. The latter cannot handle a non page aligned len
argument.

Signed-off-by: Andreas Larsson <andreas@gaisler.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nvme-rdma: destroy cm id before destroy qp to avoid use after free

[ Upstream commit 9817d763dbe15327b9b3ff4404fa6f27f927e744 ]

We should always destroy cm_id before destroy qp to avoid to get cma
event after qp was destroyed, which may lead to use after free.
In RDMA connection establishment error flow, don't destroy qp in cm
event handler.Just report cm_error to upper level, qp will be destroy
in nvme_rdma_alloc_queue() after destroy cm id.

Signed-off-by: Ruozhu Li <liruozhu@huawei.com>
Reviewed-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nvme-multipath: fix ANA state updates when a namespace is not present

[ Upstream commit 79f528afa93918519574773ea49a444c104bc1bd ]

nvme_update_ana_state() has a deficiency that results in a failure to
properly update the ana state for a namespace in the following case:

  NSIDs in ctrl->namespaces: 1, 3,    4
  NSIDs in desc->nsids: 1, 2, 3, 4

Loop iteration 0:
    ns index = 0, n = 0, ns->head->ns_id = 1, nsid = 1, MATCH.
Loop iteration 1:
    ns index = 1, n = 1, ns->head->ns_id = 3, nsid = 2, NO MATCH.
Loop iteration 2:
    ns index = 2, n = 2, ns->head->ns_id = 4, nsid = 4, MATCH.

Where the update to the ANA state of NSID 3 is missed.  To fix this
increment n and retry the update with the same ns when ns->head->ns_id is
higher than nsid,

Signed-off-by: Anton Eidelman <anton@lightbitslabs.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Sasha Levin <sashal@kernel.org>

xen/balloon: use a kernel thread instead a workqueue

[ Upstream commit 8480ed9c2bbd56fc86524998e5f2e3e22f5038f6 ]

Today the Xen ballooning is done via delayed work in a workqueue. This
might result in workqueue hangups being reported in case of large
amounts of memory are being ballooned in one go (here 16GB):

BUG: workqueue lockup - pool cpus=6 node=0 flags=0x0 nice=0 stuck for 64s!
Showing busy workqueues and worker pools:
workqueue events: flags=0x0
  pwq 12: cpus=6 node=0 flags=0x0 nice=0 active=2/256 refcnt=3
    in-flight: 229:balloon_process
    pending: cache_reap
workqueue events_freezable_power_: flags=0x84
  pwq 12: cpus=6 node=0 flags=0x0 nice=0 active=1/256 refcnt=2
    pending: disk_events_workfn
workqueue mm_percpu_wq: flags=0x8
  pwq 12: cpus=6 node=0 flags=0x0 nice=0 active=1/256 refcnt=2
    pending: vmstat_update
pool 12: cpus=6 node=0 flags=0x0 nice=0 hung=64s workers=3 idle: 2222 43

This can easily be avoided by using a dedicated kernel thread for doing
the ballooning work.

Reported-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lore.kernel.org/r/20210827123206.15429-1-jgross@suse.com
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf: Add oversize check before call kvcalloc()

[ Upstream commit 0e6491b559704da720f6da09dd0a52c4df44c514 ]

Commit 7661809d493b ("mm: don't allow oversized kvmalloc() calls") add the
oversize check. When the allocation is larger than what kmalloc() supports,
the following warning triggered:

WARNING: CPU: 0 PID: 8408 at mm/util.c:597 kvmalloc_node+0x108/0x110 mm/util.c:597
Modules linked in:
CPU: 0 PID: 8408 Comm: syz-executor221 Not tainted 5.14.0-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:kvmalloc_node+0x108/0x110 mm/util.c:597
Call Trace:
 kvmalloc include/linux/mm.h:806 [inline]
 kvmalloc_array include/linux/mm.h:824 [inline]
 kvcalloc include/linux/mm.h:829 [inline]
 check_btf_line kernel/bpf/verifier.c:9925 [inline]
 check_btf_info kernel/bpf/verifier.c:10049 [inline]
 bpf_check+0xd634/0x150d0 kernel/bpf/verifier.c:13759
 bpf_prog_load kernel/bpf/syscall.c:2301 [inline]
 __sys_bpf+0x11181/0x126e0 kernel/bpf/syscall.c:4587
 __do_sys_bpf kernel/bpf/syscall.c:4691 [inline]
 __se_sys_bpf kernel/bpf/syscall.c:4689 [inline]
 __x64_sys_bpf+0x78/0x90 kernel/bpf/syscall.c:4689
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x44/0xae

Reported-by: syzbot+f3e749d4c662818ae439@syzkaller.appspotmail.com
Signed-off-by: Bixuan Cui <cuibixuan@huawei.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210911005557.45518-1-cuibixuan@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

cpufreq: intel_pstate: Override parameters if HWP forced by BIOS

[ Upstream commit d9a7e9df731670acdc69e81748941ad338f47fab ]

If HWP has been already been enabled by BIOS, it may be
necessary to override some kernel command line parameters.
Once it has been enabled it requires a reset to be disabled.

Suggested-by: Rafael J. Wysocki <rafael@kernel.org>
Signed-off-by: Doug Smythies <dsmythies@telus.net>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dma-debug: prevent an error message from causing runtime problems

[ Upstream commit 510e1a724ab1bf38150be2c1acabb303f98d0047 ]

For some drivers, that use the DMA API. This error message can be reached
several millions of times per second, causing spam to the kernel's printk
buffer and bringing the CPU usage up to 100% (so, it should be rate
limited). However, since there is at least one driver that is in the
mainline and suffers from the error condition, it is more useful to
err_printk() here instead of just rate limiting the error message (in hopes
that it will make it easier for other drivers that suffer from this issue
to be spotted).

Link: https://lkml.kernel.org/r/fd67fbac-64bf-f0ea-01e1-5938ccfab9d0@arm.com
Reported-by: Jeremy Linton <jeremy.linton@arm.com>
Signed-off-by: Hamza Mahfooz <someguy@effective-light.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ipv6: delay fib6_sernum increase in fib6_add

[ Upstream commit e87b5052271e39d62337ade531992b7e5d8c2cfa ]

only increase fib6_sernum in net namespace after add fib6_info
successfully.

Signed-off-by: zhang kai <zhangkaiheb@126.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

m68k: Double cast io functions to unsigned long

[ Upstream commit b1a89856fbf63fffde6a4771d8f1ac21df549e50 ]

m68k builds fail widely with errors such as

arch/m68k/include/asm/raw_io.h:20:19: error:
cast to pointer from integer of different size
arch/m68k/include/asm/raw_io.h:30:32: error:
cast to pointer from integer of different size [-Werror=int-to-p

On m68k, io functions are defined as macros. The problem is seen if the
macro parameter variable size differs from the size of a pointer. Cast
the parameter of all io macros to unsigned long before casting it to
a pointer to fix the problem.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20210907060729.2391992-1-linux@roeck-us.net
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

blk-mq: avoid to iterate over stale request

[ Upstream commit 67f3b2f822b7e71cfc9b42dbd9f3144fa2933e0b ]

blk-mq can't run allocating driver tag and updating ->rqs[tag]
atomically, meantime blk-mq doesn't clear ->rqs[tag] after the driver
tag is released.

So there is chance to iterating over one stale request just after the
tag is allocated and before updating ->rqs[tag].

scsi_host_busy_iter() calls scsi_host_check_in_flight() to count scsi
in-flight requests after scsi host is blocked, so no new scsi command can
be marked as SCMD_STATE_INFLIGHT. However, driver tag allocation still can
be run by blk-mq core. One request is marked as SCMD_STATE_INFLIGHT,
but this request may have been kept in another slot of ->rqs[], meantime
the slot can be allocated out but ->rqs[] isn't updated yet. Then this
in-flight request is counted twice as SCMD_STATE_INFLIGHT. This way causes
trouble in handling scsi error.

Fixes the issue by not iterating over stale request.

Cc: linux-scsi@vger.kernel.org
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Reported-by: luojiaxing <luojiaxing@huawei.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20210906065003.439019-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: stmmac: allow CSR clock of 300MHz

[ Upstream commit 08dad2f4d541fcfe5e7bfda72cc6314bbfd2802f ]

The Synopsys Ethernet IP uses the CSR clock as a base clock for MDC.
The divisor used is set in the MAC_MDIO_Address register field CR
(Clock Rate)

The divisor is there to change the CSR clock into a clock that falls
below the IEEE 802.3 specified max frequency of 2.5MHz.

If the CSR clock is 300MHz, the code falls back to using the reset
value in the MAC_MDIO_Address register, as described in the comment
above this code.

However, 300MHz is actually an allowed value and the proper divider
can be estimated quite easily (it's just 1Hz difference!)

A CSR frequency of 300MHz with the maximum clock rate value of 0x5
(STMMAC_CSR_250_300M, a divisor of 124) gives somewhere around
~2.42MHz which is below the IEEE 802.3 specified maximum.

For the ARTPEC-8 SoC, the CSR clock is this problematic 300MHz,
and unfortunately, the reset-value of the MAC_MDIO_Address CR field
is 0x0.

This leads to a clock rate of zero and a divisor of 42, and gives an
MDC frequency of ~7.14MHz.

Allow CSR clock of 300MHz by making the comparison inclusive.

Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: macb: fix use after free on rmmod

[ Upstream commit d82d5303c4c539db86588ffb5dc5b26c3f1513e8 ]

plat_dev->dev->platform_data is released by platform_device_unregister(),
use of pclk and hclk is a use-after-free. Since device unregister won't
need a clk device we adjust the function call sequence to fix this issue.

[   31.261225] BUG: KASAN: use-after-free in macb_remove+0x77/0xc6 [macb_pci]
[   31.275563] Freed by task 306:
[   30.276782]  platform_device_release+0x25/0x80

Suggested-by: Nicolas Ferre <Nicolas.Ferre@microchip.com>
Signed-off-by: Tong Zhang <ztong0001@gmail.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: phylink: Update SFP selected interface on advertising changes

[ Upstream commit ea269a6f720782ed94171fb962b14ce07c372138 ]

Currently changes to the advertising state via ethtool do not cause any
reselection of the configured interface mode after the SFP is already
inserted and initially configured.

While it is not typical to change the advertised link modes for an
interface using an SFP in certain use cases it is desirable. In the case
of a SFP port that is capable of handling both SFP and SFP+ modules it
will automatically select between 1G and 10G modes depending on the
supported mode of the SFP. However if the SFP module is capable of
working in multiple modes (e.g. a SFP+ DAC that can operate at 1G or
10G), one end of the cable may be attached to a SFP 1000base-x port thus
the SFP+ end must be manually configured to the 1000base-x mode in order
for the link to be established.

This change causes the ethtool setting of advertised mode changes to
reselect the interface mode so that the link can be established.
Additionally when a module is inserted the advertising mode is reset to
match the supported modes of the module.

Signed-off-by: Nathan Rossi <nathan.rossi@digi.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

blktrace: Fix uaf in blk_trace access after removing by sysfs

[ Upstream commit 5afedf670caf30a2b5a52da96eb7eac7dee6a9c9 ]

There is an use-after-free problem triggered by following process:

      P1(sda) P2(sdb)
echo 0 > /sys/block/sdb/trace/enable
  blk_trace_remove_queue
    synchronize_rcu
    blk_trace_free
      relay_close
rcu_read_lock
__blk_add_trace
  trace_note_tsk
  (Iterate running_trace_list)
        relay_close_buf
  relay_destroy_buf
    kfree(buf)
    trace_note(sdb's bt)
      relay_reserve
        buf->offset <- nullptr deference (use-after-free) !!!
rcu_read_unlock

[  502.714379] BUG: kernel NULL pointer dereference, address:
0000000000000010
[  502.715260] #PF: supervisor read access in kernel mode
[  502.715903] #PF: error_code(0x0000) - not-present page
[  502.716546] PGD 103984067 P4D 103984067 PUD 17592b067 PMD 0
[  502.717252] Oops: 0000 [#1] SMP
[  502.720308] RIP: 0010:trace_note.isra.0+0x86/0x360
[  502.732872] Call Trace:
[  502.733193]  __blk_add_trace.cold+0x137/0x1a3
[  502.733734]  blk_add_trace_rq+0x7b/0xd0
[  502.734207]  blk_add_trace_rq_issue+0x54/0xa0
[  502.734755]  blk_mq_start_request+0xde/0x1b0
[  502.735287]  scsi_queue_rq+0x528/0x1140
...
[  502.742704]  sg_new_write.isra.0+0x16e/0x3e0
[  502.747501]  sg_ioctl+0x466/0x1100

Reproduce method:
  ioctl(/dev/sda, BLKTRACESETUP, blk_user_trace_setup[buf_size=127])
  ioctl(/dev/sda, BLKTRACESTART)
  ioctl(/dev/sdb, BLKTRACESETUP, blk_user_trace_setup[buf_size=127])
  ioctl(/dev/sdb, BLKTRACESTART)

  echo 0 > /sys/block/sdb/trace/enable &
  // Add delay(mdelay/msleep) before kernel enters blk_trace_free()

  ioctl$SG_IO(/dev/sda, SG_IO, ...)
  // Enters trace_note_tsk() after blk_trace_free() returned
  // Use mdelay in rcu region rather than msleep(which may schedule out)

Remove blk_trace from running_list before calling blk_trace_free() by
sysfs if blk_trace is at Blktrace_running state.

Fixes: c71a896154119f ("blktrace: add ftrace plugin")
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Link: https://lore.kernel.org/r/20210923134921.109194-1-chengzhihao1@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

io_uring: don't punt files update to io-wq unconditionally

[ Upstream commit cdb31c29d397a8076d81fd1458d091c647ef94ba ]

There's no reason to punt it unconditionally, we just need to ensure that
the submit lock grabbing is conditional.

Fixes: 05f3fb3c5397 ("io_uring: avoid ring quiesce for fixed file set unregister and update")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

io_uring: put provided buffer meta data under memcg accounting

[ Upstream commit 9990da93d2bf9892c2c14c958bef050d4e461a1a ]

For each provided buffer, we allocate a struct io_buffer to hold the
data associated with it. As a large number of buffers can be provided,
account that data with memcg.

Fixes: ddf0322db79c ("io_uring: add IORING_OP_PROVIDE_BUFFERS")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

io_uring: fix missing set of EPOLLONESHOT for CQ ring overflow

[ Upstream commit a62682f92eedb41c1cd8290fa875a4b85624fb9a ]

We should set EPOLLONESHOT if cqring_fill_event() returns false since
io_poll_add() decides to put req or not by it.

Fixes: 5082620fb2ca ("io_uring: terminate multishot poll for CQ ring overflow")
Signed-off-by: Hao Xu <haoxu@linux.alibaba.com>
Link: https://lore.kernel.org/r/20210922101238.7177-3-haoxu@linux.alibaba.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

io_uring: fix race between poll completion and cancel_hash insertion

[ Upstream commit bd99c71bd14072ce2920f6d0c2fe43df072c653c ]

If poll arming and poll completion runs in parallel, there maybe races.
For instance, run io_poll_add in iowq and io_poll_task_func in original
context, then:

  iowq                                      original context
  io_poll_add
    vfs_poll
     (interruption happens
      tw queued to original
      context)                              io_poll_task_func
                                              generate cqe
                                              del from cancel_hash[]
    if !poll.done
      insert to cancel_hash[]

The entry left in cancel_hash[], similar case for fast poll.
Fix it by set poll.done = true when del from cancel_hash[].

Fixes: 5082620fb2ca ("io_uring: terminate multishot poll for CQ ring overflow")
Signed-off-by: Hao Xu <haoxu@linux.alibaba.com>
Link: https://lore.kernel.org/r/20210922101238.7177-2-haoxu@linux.alibaba.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

x86/asm: Fix SETZ size enqcmds() build failure

[ Upstream commit d81ff5fe14a950f53e2833cfa196e7bb3fd5d4e3 ]

When building under GCC 4.9 and 5.5:

  arch/x86/include/asm/special_insns.h: Assembler messages:
  arch/x86/include/asm/special_insns.h:286: Error: operand size mismatch for `setz'

Change the type to "bool" for condition code arguments, as documented.

Fixes: 7f5933f81bd8 ("x86/asm: Add an enqcmds() wrapper for the ENQCMDS instruction")
Co-developed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20210910223332.3224851-1-keescook@chromium.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

md: fix a lock order reversal in md_alloc

[ Upstream commit 7df835a32a8bedf7ce88efcfa7c9b245b52ff139 ]

Commit b0140891a8cea3 ("md: Fix race when creating a new md device.")
not only moved assigning mddev->gendisk before calling add_disk, which
fixes the races described in the commit log, but also added a
mddev->open_mutex critical section over add_disk and creation of the
md kobj.  Adding a kobject after add_disk is racy vs deleting the gendisk
right after adding it, but md already prevents against that by holding
a mddev->active reference.

On the other hand taking this lock added a lock order reversal with what
is not disk->open_mutex (used to be bdev->bd_mutex when the commit was
added) for partition devices, which need that lock for the internal open
for the partition scan, and a recent commit also takes it for
non-partitioned devices, leading to further lockdep splatter.

Fixes: b0140891a8ce ("md: Fix race when creating a new md device.")
Fixes: d62633873590 ("block: support delayed holder registration")
Reported-by: syzbot+fadc0aaf497e6a493b9f@syzkaller.appspotmail.com
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: syzbot+fadc0aaf497e6a493b9f@syzkaller.appspotmail.com
Reviewed-by: NeilBrown <neilb@suse.de>
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

irqchip/gic-v3-its: Fix potential VPE leak on error

[ Upstream commit 280bef512933b2dda01d681d8cbe499b98fc5bdd ]

In its_vpe_irq_domain_alloc, when its_vpe_init() returns an error,
there is an off-by-one in the number of VPEs to be freed.

Fix it by simply passing the number of VPEs allocated, which is the
index of the loop iterating over the VPEs.

Fixes: 7d75bbb4bc1a ("irqchip/gic-v3-its: Add VPE irq domain allocation/teardown")
Signed-off-by: Kaige Fu <kaige.fu@linux.alibaba.com>
[maz: fixed commit message]
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/d9e36dee512e63670287ed9eff884a5d8d6d27f2.1631672311.git.kaige.fu@linux.alibaba.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

irqchip/goldfish-pic: Select GENERIC_IRQ_CHIP to fix build

[ Upstream commit 969ac78db78c723a24e9410666b457cc1b0cb3c3 ]

irq-goldfish-pic uses GENERIC_IRQ_CHIP interfaces so select that symbol
to fix build errors.

Fixes these build errors:

mips-linux-ld: drivers/irqchip/irq-goldfish-pic.o: in function `goldfish_pic_of_init':
irq-goldfish-pic.c:(.init.text+0xc0): undefined reference to `irq_alloc_generic_chip'
mips-linux-ld: irq-goldfish-pic.c:(.init.text+0xf4): undefined reference to `irq_gc_unmask_enable_reg'
mips-linux-ld: irq-goldfish-pic.c:(.init.text+0xf8): undefined reference to `irq_gc_unmask_enable_reg'
mips-linux-ld: irq-goldfish-pic.c:(.init.text+0x100): undefined reference to `irq_gc_mask_disable_reg'
mips-linux-ld: irq-goldfish-pic.c:(.init.text+0x104): undefined reference to `irq_gc_mask_disable_reg'
mips-linux-ld: irq-goldfish-pic.c:(.init.text+0x11c): undefined reference to `irq_setup_generic_chip'
mips-linux-ld: irq-goldfish-pic.c:(.init.text+0x168): undefined reference to `irq_remove_generic_chip'

Fixes: 4235ff50cf98 ("irqchip/irq-goldfish-pic: Add Goldfish PIC driver")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Miodrag Dinic <miodrag.dinic@mips.com>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Goran Ferenc <goran.ferenc@mips.com>
Cc: Aleksandar Markovic <aleksandar.markovic@mips.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210905162519.21507-1-rdunlap@infradead.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: lpfc: Use correct scnprintf() limit

[ Upstream commit 6dacc371b77f473770ec646e220303a84fe96c11 ]

The limit should be "PAGE_SIZE - len" instead of "PAGE_SIZE".  We're not
going to hit the limit so this fix will not affect runtime.

Link: https://lore.kernel.org/r/20210916132331.GE25094@kili
Fixes: 5b9e70b22cc5 ("scsi: lpfc: raise sg count for nvme to use available sg resources")
Reviewed-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: qla2xxx: Restore initiator in dual mode

[ Upstream commit 5f8579038842d77e6ce05e1df6bf9dd493b0e3ef ]

In dual mode in case of disabling the target, the whole port goes offline
and initiator is turned off too.

Fix restoring initiator mode after disabling target in dual mode.

Link: https://lore.kernel.org/r/20210915153239.8035-1-d.bogdanov@yadro.com
Fixes: 0645cb8350cd ("scsi: qla2xxx: Add mode control for each physical port")
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Dmitry Bogdanov <d.bogdanov@yadro.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>