Linux 2.6.32.60

Signed-off-by: Willy Tarreau <w@1wt.eu>

dmi: Feed DMI table to /dev/random driver

commit d114a33387472555188f142ed8e98acdb8181c6d upstream.

Send the entire DMI (SMBIOS) table to the /dev/random driver to
help seed its pools.

Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>

mfd: wm831x: Feed the device UUID into device_add_randomness()

commit 27130f0cc3ab97560384da437e4621fc4e94f21c upstream.

wm831x devices contain a unique ID value. Feed this into the newly added
device_add_randomness() to add some per device seed data to the pool.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>

rtc: wm831x: Feed the write counter into device_add_randomness()

commit 9dccf55f4cb011a7552a8a2749a580662f5ed8ed upstream.

The tamper evident features of the RTC include the "write counter" which
is a pseudo-random number regenerated whenever we set the RTC. Since this
value is unpredictable it should provide some useful seeding to the random
number generator.

Only do this on boot since the goal is to seed the pool rather than add
useful entropy.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>

random: Add comment to random_initialize()

commit cbc96b7594b5691d61eba2db8b2ea723645be9ca upstream.

Many platforms have per-machine instance data (serial numbers,
asset tags, etc.) squirreled away in areas that are accessed
during early system bringup. Mixing this data into the random
pools has a very high value in providing better random data,
so we should allow (and even encourage) architecture code to
call add_device_randomness() from the setup_arch() paths.

However, this limits our options for internal structure of
the random driver since random_initialize() is not called
until long after setup_arch().

Add a big fat comment to rand_initialize() spelling out
this requirement.

Suggested-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>

random: remove rand_initialize_irq()

commit c5857ccf293968348e5eb4ebedc68074de3dcda6 upstream.

With the new interrupt sampling system, we are no longer using the
timer_rand_state structure in the irq descriptor, so we can stop
initializing it now.

[ Merged in fixes from Sedat to find some last missing references to
  rand_initialize_irq() ]

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Sedat Dilek <sedat.dilek@gmail.com>
[PG: in .34 the irqdesc.h content is in irq.h instead.]
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>

net: feed /dev/random with the MAC address when registering a device

commit 7bf2357524408b97fec58344caf7397f8140c3fd upstream.

Cc: David Miller <davem@davemloft.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>

usb: feed USB device information to the /dev/random driver

commit b04b3156a20d395a7faa8eed98698d1e17a36000 upstream.

Send the USB device's serial, product, and manufacturer strings to the
/dev/random driver to help seed its pools.

Cc: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Greg KH <greg@kroah.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>

MAINTAINERS: Theodore Ts'o is taking over the random driver

commit 330e0a01d54c2b8606c56816f99af6ebc58ec92c upstream.

Matt Mackall stepped down as the /dev/random driver maintainer last
year, so Theodore Ts'o is taking back the /dev/random driver.

Cc: Matt Mackall <mpm@selenic.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>

random: mix in architectural randomness in extract_buf()

commit d2e7c96af1e54b507ae2a6a7dd2baf588417a7e5 upstream.

Mix in any architectural randomness in extract_buf() instead of
xfer_secondary_buf().  This allows us to mix in more architectural
randomness, and it also makes xfer_secondary_buf() faster, moving a
tiny bit of additional CPU overhead to process which is extracting the
randomness.

[ Commit description modified by tytso to remove an extended
  advertisement for the RDRAND instruction. ]

Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: DJ Johnston <dj.johnston@intel.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>

random: add new get_random_bytes_arch() function

commit c2557a303ab6712bb6e09447df828c557c710ac9 upstream.

Create a new function, get_random_bytes_arch() which will use the
architecture-specific hardware random number generator if it is
present.  Change get_random_bytes() to not use the HW RNG, even if it
is avaiable.

The reason for this is that the hw random number generator is fast (if
it is present), but it requires that we trust the hardware
manufacturer to have not put in a back door.  (For example, an
increasing counter encrypted by an AES key known to the NSA.)

It's unlikely that Intel (for example) was paid off by the US
Government to do this, but it's impossible for them to prove otherwise
 --- especially since Bull Mountain is documented to use AES as a
whitener.  Hence, the output of an evil, trojan-horse version of
RDRAND is statistically indistinguishable from an RDRAND implemented
to the specifications claimed by Intel.  Short of using a tunnelling
electronic microscope to reverse engineer an Ivy Bridge chip and
disassembling and analyzing the CPU microcode, there's no way for us
to tell for sure.

Since users of get_random_bytes() in the Linux kernel need to be able
to support hardware systems where the HW RNG is not present, most
time-sensitive users of this interface have already created their own
cryptographic RNG interface which uses get_random_bytes() as a seed.
So it's much better to use the HW RNG to improve the existing random
number generator, by mixing in any entropy returned by the HW RNG into
/dev/random's entropy pool, but to always _use_ /dev/random's entropy
pool.

This way we get almost of the benefits of the HW RNG without any
potential liabilities.  The only benefits we forgo is the
speed/performance enhancements --- and generic kernel code can't
depend on depend on get_random_bytes() having the speed of a HW RNG
anyway.

For those places that really want access to the arch-specific HW RNG,
if it is available, we provide get_random_bytes_arch().

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>

random: use the arch-specific rng in xfer_secondary_pool

commit e6d4947b12e8ad947add1032dd754803c6004824 upstream.

If the CPU supports a hardware random number generator, use it in
xfer_secondary_pool(), where it will significantly improve things and
where we can afford it.

Also, remove the use of the arch-specific rng in
add_timer_randomness(), since the call is significantly slower than
get_cycles(), and we're much better off using it in
xfer_secondary_pool() anyway.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>

random: create add_device_randomness() interface

commit a2080a67abe9e314f9e9c2cc3a4a176e8a8f8793 upstream.

Add a new interface, add_device_randomness() for adding data to the
random pool that is likely to differ between two devices (or possibly
even per boot).  This would be things like MAC addresses or serial
numbers, or the read-out of the RTC. This does *not* add any actual
entropy to the pool, but it initializes the pool to different values
for devices that might otherwise be identical and have very little
entropy available to them (particularly common in the embedded world).

[ Modified by tytso to mix in a timestamp, since there may be some
  variability caused by the time needed to detect/configure the hardware
  in question. ]

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>

random: use lockless techniques in the interrupt path

commit 902c098a3663de3fa18639efbb71b6080f0bcd3c upstream.

The real-time Linux folks don't like add_interrupt_randomness() taking
a spinlock since it is called in the low-level interrupt routine.
This also allows us to reduce the overhead in the fast path, for the
random driver, which is the interrupt collection path.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>

random: make 'add_interrupt_randomness()' do something sane

commit 775f4b297b780601e61787b766f306ed3e1d23eb upstream.

We've been moving away from add_interrupt_randomness() for various
reasons: it's too expensive to do on every interrupt, and flooding the
CPU with interrupts could theoretically cause bogus floods of entropy
from a somewhat externally controllable source.

This solves both problems by limiting the actual randomness addition
to just once a second or after 64 interrupts, whicever comes first.
During that time, the interrupt cycle data is buffered up in a per-cpu
pool.  Also, we make sure the the nonblocking pool used by urandom is
initialized before we start feeding the normal input pool.  This
assures that /dev/urandom is returning unpredictable data as soon as
possible.

(Based on an original patch by Linus, but significantly modified by
tytso.)

Tested-by: Eric Wustrow <ewust@umich.edu>
Reported-by: Eric Wustrow <ewust@umich.edu>
Reported-by: Nadia Heninger <nadiah@cs.ucsd.edu>
Reported-by: Zakir Durumeric <zakir@umich.edu>
Reported-by: J. Alex Halderman <jhalderm@umich.edu>.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
[PG: minor adjustment required since .34 doesn't have f9e4989eb8
 which renames "status" to "random" in kernel/irq/handle.c ]
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>

drivers/char/random.c: fix boot id uniqueness race

commit 44e4360fa3384850d65dd36fb4e6e5f2f112709b upstream.

/proc/sys/kernel/random/boot_id can be read concurrently by userspace
processes.  If two (or more) user-space processes concurrently read
boot_id when sysctl_bootid is not yet assigned, a race can occur making
boot_id differ between the reads.  Because the whole point of the boot id
is to be unique across a kernel execution, fix this by protecting this
operation with a spinlock.

Given that this operation is not frequently used, hitting the spinlock
on each call should not be an issue.

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Matt Mackall <mpm@selenic.com>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Greg Kroah-Hartman <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>

random: Adjust the number of loops when initializing

commit 2dac8e54f988ab58525505d7ef982493374433c3 upstream.

When we are initializing using arch_get_random_long() we only need to
loop enough times to touch all the bytes in the buffer; using
poolwords for that does twice the number of operations necessary on a
64-bit machine, since in the random number generator code "word" means
32 bits.

Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Link: http://lkml.kernel.org/r/1324589281-31931-1-git-send-email-tytso@mit.edu
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>

random: Use arch-specific RNG to initialize the entropy store

commit 3e88bdff1c65145f7ba297ccec69c774afe4c785 upstream.

If there is an architecture-specific random number generator (such as
RDRAND for Intel architectures), use it to initialize /dev/random's
entropy stores.  Even in the worst case, if RDRAND is something like
AES(NSA_KEY, counter++), it won't hurt, and it will definitely help
against any other adversaries.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Link: http://lkml.kernel.org/r/1324589281-31931-1-git-send-email-tytso@mit.edu
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>

random: Use arch_get_random_int instead of cycle counter if avail

commit cf833d0b9937874b50ef2867c4e8badfd64948ce upstream.

We still don't use rdrand in /dev/random, which just seems stupid. We
accept the *cycle*counter* as a random input, but we don't accept
rdrand? That's just broken.

Sure, people can do things in user space (write to /dev/random, use
rdrand in addition to /dev/random themselves etc etc), but that
*still* seems to be a particularly stupid reason for saying "we
shouldn't bother to try to do better in /dev/random".

And even if somebody really doesn't trust rdrand as a source of random
bytes, it seems singularly stupid to trust the cycle counter *more*.

So I'd suggest the attached patch. I'm not going to even bother
arguing that we should add more bits to the entropy estimate, because
that's not the point - I don't care if /dev/random fills up slowly or
not, I think it's just stupid to not use the bits we can get from
rdrand and mix them into the strong randomness pool.

Link: http://lkml.kernel.org/r/CA%2B55aFwn59N1=m651QAyTy-1gO1noGbK18zwKDwvwqnravA84A@mail.gmail.com
Acked-by: "David S. Miller" <davem@davemloft.net>
Acked-by: "Theodore Ts'o" <tytso@mit.edu>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>

fix typo/thinko in get_random_bytes()

commit bd29e568a4cb6465f6e5ec7c1c1f3ae7d99cbec1 upstream.

If there is an architecture-specific random number generator we use it
to acquire randomness one "long" at a time.  We should put these random
words into consecutive words in the result buffer - not just overwrite
the first word again and again.

Signed-off-by: Tony Luck <tony.luck@intel.com>
Acked-by: H. Peter Anvin <hpa@zytor.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>

x86, random: Verify RDRAND functionality and allow it to be disabled

commit 49d859d78c5aeb998b6936fcb5f288f78d713489 upstream.

If the CPU declares that RDRAND is available, go through a guranteed
reseed sequence, and make sure that it is actually working (producing
data.)   If it does not, disable the CPU feature flag.

Allow RDRAND to be disabled on the command line (as opposed to at
compile time) for a user who has special requirements with regards to
random numbers.

Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Willy Tarreau <w@1wt.eu>

x86, random: Architectural inlines to get random integers with RDRAND

commit 628c6246d47b85f5357298601df2444d7f4dd3fd upstream.

Architectural inlines to get random ints and longs using the RDRAND
instruction.

Intel has introduced a new RDRAND instruction, a Digital Random Number
Generator (DRNG), which is functionally an high bandwidth entropy
source, cryptographic whitener, and integrity monitor all built into
hardware.  This enables RDRAND to be used directly, bypassing the
kernel random number pool.

For technical documentation, see:

http://software.intel.com/en-us/articles/download-the-latest-bull-mountain-software-implementation-guide/

In this patch, this is *only* used for the nonblocking random number
pool.  RDRAND is a nonblocking source, similar to our /dev/urandom,
and is therefore not a direct replacement for /dev/random.  The
architectural hooks presented in the previous patch only feed the
kernel internal users, which only use the nonblocking pool, and so
this is not a problem.

Since this instruction is available in userspace, there is no reason
to have a /dev/hw_rng device driver for the purpose of feeding rngd.
This is especially so since RDRAND is a nonblocking source, and needs
additional whitening and reduction (see the above technical
documentation for details) in order to be of "pure entropy source"
quality.

The CONFIG_EXPERT compile-time option can be used to disable this use
of RDRAND.

Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Originally-by: Fenghua Yu <fenghua.yu@intel.com>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>

random: Add support for architectural random hooks

commit 63d77173266c1791f1553e9e8ccea65dc87c4485 upstream.

Add support for architecture-specific hooks into the kernel-directed
random number generator interfaces.  This patchset does not use the
architecture random number generator interfaces for the
userspace-directed interfaces (/dev/random and /dev/urandom), thus
eliminating the need to distinguish between them based on a pool
pointer.

Changes in version 3:
- Moved the hooks from extract_entropy() to get_random_bytes().
- Changes the hooks to inlines.

Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "Theodore Ts'o" <tytso@mit.edu>
[PG: .34 already had "unsigned int ret" in get_random_int, so the
 diffstat here is slightly smaller than that of 63d7717. ]
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>

x86, cpufeature: Update CPU feature RDRND to RDRAND

commit 7ccafc5f75c87853f3c49845d5a884f2376e03ce upstream.

The Intel manual changed the name of the CPUID bit to match the
instruction name. We should follow suit for sanity's sake. (See Intel SDM
Volume 2, Table 3-20 "Feature Information Returned in the ECX Register".)

[ hpa: we can only do this at this time because there are currently no CPUs
  with this feature on the market, hence this is pre-hardware enabling.
  However, Cc:'ing stable so that stable can present a consistent ABI. ]

Signed-off-by: Kees Cook <kees.cook@canonical.com>
Link: http://lkml.kernel.org/r/20110524232926.GA27728@outflux.net
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>

x86, cpu: Add CPU flags for F16C and RDRND

commit 24da9c26f3050aee9314ec09930a24c80fe76352 upstream.

Add support for the newly documented F16C (16-bit floating point
conversions) and RDRND (RDRAND instruction) CPU feature flags.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>

random: simplify fips mode

commit e954bc91bdd4bb08b8325478c5004b24a23a3522 upstream.

Rather than dynamically allocate 10 bytes, move it to static allocation.
This saves space and avoids the need for error checking.

Signed-off-by: Matt Mackall <mpm@selenic.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
[PG: adding this simplifies required updates to random for .34 stable]
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>

random: update interface comments to reflect reality

commit 442a4fffffa26fc3080350b4d50172f7589c3ac2 upstream.

At present, the comment header in random.c makes no mention of
add_disk_randomness, and instead, suggests that disk activity adds to the
random pool by way of add_interrupt_randomness, which appears to not have
been the case since sometime prior to the existence of git, and even prior
to bitkeeper. Didn't look any further back. At least, as far as I can
tell, there are no storage drivers setting IRQF_SAMPLE_RANDOM, which is a
requirement for add_interrupt_randomness to trigger, so the only way for a
disk to contribute entropy is by way of add_disk_randomness. Update
comments accordingly, complete with special mention about solid state
drives being a crappy source of entropy (see e2e1a148bc for reference).

Signed-off-by: Jarod Wilson <jarod@redhat.com>
Acked-by: Matt Mackall <mpm@selenic.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Willy Tarreau <w@1wt.eu>

random: Reorder struct entropy_store to remove padding on 64bits

commit 4015d9a865e3bcc42d88bedc8ce1551000bab664 upstream.

Re-order structure entropy_store to remove 8 bytes of padding on
64 bit builds, so shrinking this structure from 72 to 64 bytes
and allowing it to fit into one cache line.

Signed-off-by: Richard Kennedy <richard@rsk.demon.co.uk>
Signed-off-by: Matt Mackall <mpm@selenic.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Willy Tarreau <w@1wt.eu>

epoll: clear the tfile_check_list on -ELOOP

commit 13d518074a952d33d47c428419693f63389547e9 upstream.

An epoll_ctl(,EPOLL_CTL_ADD,,) operation can return '-ELOOP' to prevent
circular epoll dependencies from being created.  However, in that case we
do not properly clear the 'tfile_check_list'.  Thus, add a call to
clear_tfile_check_list() for the -ELOOP case.

Signed-off-by: Jason Baron <jbaron@redhat.com>
Reported-by: Yurij M. Plotnikov <Yurij.Plotnikov@oktetlabs.ru>
Cc: Nelson Elhage <nelhage@nelhage.com>
Cc: Davide Libenzi <davidel@xmailserver.org>
Tested-by: Alexandra N. Kossovsky <Alexandra.Kossovsky@oktetlabs.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Willy Tarreau <w@1wt.eu>

Don't limit non-nested epoll paths

commit 93dc6107a76daed81c07f50215fa6ae77691634f upstream.

Commit 28d82dc1c4ed ("epoll: limit paths") that I did to limit the
number of possible wakeup paths in epoll is causing a few applications
to longer work (dovecot for one).

The original patch is really about limiting the amount of epoll nesting
(since epoll fds can be attached to other fds). Thus, we probably can
allow an unlimited number of paths of depth 1. My current patch limits
it at 1000. And enforce the limits on paths that have a greater depth.

This is captured in: https://bugzilla.redhat.com/show_bug.cgi?id=681578

Signed-off-by: Jason Baron <jbaron@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>

epoll: limit paths

commit 28d82dc1c4edbc352129f97f4ca22624d1fe61de upstream.

The current epoll code can be tickled to run basically indefinitely in
both loop detection path check (on ep_insert()), and in the wakeup paths.
The programs that tickle this behavior set up deeply linked networks of
epoll file descriptors that cause the epoll algorithms to traverse them
indefinitely.  A couple of these sample programs have been previously
posted in this thread: https://lkml.org/lkml/2011/2/25/297.

To fix the loop detection path check algorithms, I simply keep track of
the epoll nodes that have been already visited.  Thus, the loop detection
becomes proportional to the number of epoll file descriptor and links.
This dramatically decreases the run-time of the loop check algorithm.  In
one diabolical case I tried it reduced the run-time from 15 mintues (all
in kernel time) to .3 seconds.

Fixing the wakeup paths could be done at wakeup time in a similar manner
by keeping track of nodes that have already been visited, but the
complexity is harder, since there can be multiple wakeups on different
cpus...Thus, I've opted to limit the number of possible wakeup paths when
the paths are created.

This is accomplished, by noting that the end file descriptor points that
are found during the loop detection pass (from the newly added link), are
actually the sources for wakeup events.  I keep a list of these file
descriptors and limit the number and length of these paths that emanate
from these 'source file descriptors'.  In the current implemetation I
allow 1000 paths of length 1, 500 of length 2, 100 of length 3, 50 of
length 4 and 10 of length 5.  Note that it is sufficient to check the
'source file descriptors' reachable from the newly added link, since no
other 'source file descriptors' will have newly added links.  This allows
us to check only the wakeup paths that may have gotten too long, and not
re-check all possible wakeup paths on the system.

In terms of the path limit selection, I think its first worth noting that
the most common case for epoll, is probably the model where you have 1
epoll file descriptor that is monitoring n number of 'source file
descriptors'.  In this case, each 'source file descriptor' has a 1 path of
length 1.  Thus, I believe that the limits I'm proposing are quite
reasonable and in fact may be too generous.  Thus, I'm hoping that the
proposed limits will not prevent any workloads that currently work to
fail.

In terms of locking, I have extended the use of the 'epmutex' to all
epoll_ctl add and remove operations.  Currently its only used in a subset
of the add paths.  I need to hold the epmutex, so that we can correctly
traverse a coherent graph, to check the number of paths.  I believe that
this additional locking is probably ok, since its in the setup/teardown
paths, and doesn't affect the running paths, but it certainly is going to
add some extra overhead.  Also, worth noting is that the epmuex was
recently added to the ep_ctl add operations in the initial path loop
detection code using the argument that it was not on a critical path.

Another thing to note here, is the length of epoll chains that is allowed.
Currently, eventpoll.c defines:

/* Maximum number of nesting allowed inside epoll sets */

This basically means that I am limited to a graph depth of 5 (EP_MAX_NESTS
+ 1).  However, this limit is currently only enforced during the loop
check detection code, and only when the epoll file descriptors are added
in a certain order.  Thus, this limit is currently easily bypassed.  The
newly added check for wakeup paths, stricly limits the wakeup paths to a
length of 5, regardless of the order in which ep's are linked together.
Thus, a side-effect of the new code is a more consistent enforcement of
the graph depth.

Thus far, I've tested this, using the sample programs previously
mentioned, which now either return quickly or return -EINVAL.  I've also
testing using the piptest.c epoll tester, which showed no difference in
performance.  I've also created a number of different epoll networks and
tested that they behave as expectded.

I believe this solves the original diabolical test cases, while still
preserving the sane epoll nesting.

Signed-off-by: Jason Baron <jbaron@redhat.com>
Cc: Nelson Elhage <nelhage@ksplice.com>
Cc: Davide Libenzi <davidel@xmailserver.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>

epoll: ep_unregister_pollwait() can use the freed pwq->whead

commit 971316f0503a5c50633d07b83b6db2f15a3a5b00 upstream.

signalfd_cleanup() ensures that ->signalfd_wqh is not used, but
this is not enough. eppoll_entry->whead still points to the memory
we are going to free, ep_unregister_pollwait()->remove_wait_queue()
is obviously unsafe.

Change ep_poll_callback(POLLFREE) to set eppoll_entry->whead = NULL,
change ep_unregister_pollwait() to check pwq->whead != NULL under
rcu_read_lock() before remove_wait_queue(). We add the new helper,
ep_remove_wait_queue(), for this.

This works because sighand_cachep is SLAB_DESTROY_BY_RCU and because
->signalfd_wqh is initialized in sighand_ctor(), not in copy_sighand.
ep_unregister_pollwait()->remove_wait_queue() can play with already
freed and potentially reused ->sighand, but this is fine. This memory
must have the valid ->signalfd_wqh until rcu_read_unlock().

Reported-by: Maxime Bizon <mbizon@freebox.fr>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>

epoll: introduce POLLFREE to flush ->signalfd_wqh before kfree()

commit d80e731ecab420ddcb79ee9d0ac427acbc187b4b upstream.

This patch is intentionally incomplete to simplify the review.
It ignores ep_unregister_pollwait() which plays with the same wqh.
See the next change.

epoll assumes that the EPOLL_CTL_ADD'ed file controls everything
f_op->poll() needs. In particular it assumes that the wait queue
can't go away until eventpoll_release(). This is not true in case
of signalfd, the task which does EPOLL_CTL_ADD uses its ->sighand
which is not connected to the file.

This patch adds the special event, POLLFREE, currently only for
epoll. It expects that init_poll_funcptr()'ed hook should do the
necessary cleanup. Perhaps it should be defined as EPOLLFREE in
eventpoll.

__cleanup_sighand() is changed to do wake_up_poll(POLLFREE) if
->signalfd_wqh is not empty, we add the new signalfd_cleanup()
helper.

ep_poll_callback(POLLFREE) simply does list_del_init(task_list).
This make this poll entry inconsistent, but we don't care. If you
share epoll fd which contains our sigfd with another process you
should blame yourself. signalfd is "really special". I simply do
not know how we can define the "right" semantics if it used with
epoll.

The main problem is, epoll calls signalfd_poll() once to establish
the connection with the wait queue, after that signalfd_poll(NULL)
returns the different/inconsistent results depending on who does
EPOLL_CTL_MOD/signalfd_read/etc. IOW: apart from sigmask, signalfd
has nothing to do with the file, it works with the current thread.

In short: this patch is the hack which tries to fix the symptoms.
It also assumes that nobody can take tasklist_lock under epoll
locks, this seems to be true.

Note:

- we do not have wake_up_all_poll() but wake_up_poll()
  is fine, poll/epoll doesn't use WQ_FLAG_EXCLUSIVE.

- signalfd_cleanup() uses POLLHUP along with POLLFREE,
  we need a couple of simple changes in eventpoll.c to
  make sure it can't be "lost".

Reported-by: Maxime Bizon <mbizon@freebox.fr>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>

mtd: cafe_nand: fix an & vs | mistake

commit 48f8b641297df49021093763a3271119a84990a2 upstream.

The intent here was clearly to set result to true if the 0x40000000 flag
was set.  But instead there was a | vs & typo and we always set result
to true.

Artem: check the spec at
wiki.laptop.org/images/5/5c/88ALP01_Datasheet_July_2007.pdf
and this fix looks correct.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>

udf: fix retun value on error path in udf_load_logicalvol

commit 68766a2edcd5cd744262a70a2f67a320ac944760 upstream.

In case we detect a problem and bail out, we fail to set "ret" to a
nonzero value, and udf_load_logicalvol will mistakenly report success.

Signed-off-by: Nikola Pajkovsky <npajkovs@redhat.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Willy Tarreau <w@1wt.eu>

udf: Fortify loading of sparing table

commit 1df2ae31c724e57be9d7ac00d78db8a5dabdd050 upstream.

Add sanity checks when loading sparing table from disk to avoid accessing
unallocated memory or writing to it.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>

sparc64: Eliminate obsolete __handle_softirq() function

commit 3d3eeb2ef26112a200785e5fca58ec58dd33bf1e upstream.

The invocation of softirq is now handled by irq_exit(), so there is no
need for sparc64 to invoke it on the trap-return path.  In fact, doing so
is a bug because if the trap occurred in the idle loop, this invocation
can result in lockdep-RCU failures.  The problem is that RCU ignores idle
CPUs, and the sparc64 trap-return path to the softirq handlers fails to
tell RCU that the CPU must be considered non-idle while those handlers
are executing.  This means that RCU is ignoring any RCU read-side critical
sections in those handlers, which in turn means that RCU-protected data
can be yanked out from under those read-side critical sections.

The shiny new lockdep-RCU ability to detect RCU read-side critical sections
that RCU is ignoring located this problem.

The fix is straightforward: Make sparc64 stop manually invoking the
softirq handlers.

Reported-by: Meelis Roos <mroos@linux.ee>
Suggested-by: David Miller <davem@davemloft.net>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Tested-by: Meelis Roos <mroos@linux.ee>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>

x86, tls: Off by one limit check

commit 8f0750f19789cf352d7e24a6cc50f2ab1b4f1372 upstream.

These are used as offsets into an array of GDT_ENTRY_TLS_ENTRIES members
so GDT_ENTRY_TLS_ENTRIES is one past the end of the array.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: http://lkml.kernel.org/r/20120324075250.GA28258@elgon.mountain
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>

x86, amd, xen: Avoid NULL pointer paravirt references

commit 1ab46fd319bcf1fcd9fb6311727d532b580e4eba upstream.

Stub out MSR methods that aren't actually needed.  This fixes a crash
as Xen Dom0 on AMD Trinity systems.  A bigger patch should be added to
remove the paravirt machinery completely for the methods which
apparently have no users!

Reported-by: Andre Przywara <andre.przywara@amd.com>
Link: http://lkml.kernel.org/r/20120530222356.GA28417@andromeda.dapyr.net
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Willy Tarreau <w@1wt.eu>

xen: correctly check for pending events when restoring irq flags

commit 7eb7ce4d2e8991aff4ecb71a81949a907ca755ac upstream.

In xen_restore_fl_direct(), xen_force_evtchn_callback() was being
called even if no events were pending.  This resulted in (depending on
workload) about a 100 times as many xen_version hypercalls as
necessary.

Fix this by correcting the sense of the conditional jump.

This seems to give a significant performance benefit for some
workloads.

There is some subtle tricksy "..since the check here is trying to
check both pending and masked in a single cmpw, but I think this is
correct. It will call check_events now only when the combined
mask+pending word is 0x0001 (aka unmasked, pending)." (Ian)

Acked-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>

tcp: drop SYN+FIN messages

commit fdf5af0daf8019cec2396cdef8fb042d80fe71fa upstream.

Denys Fedoryshchenko reported that SYN+FIN attacks were bringing his
linux machines to their limits.

Dont call conn_request() if the TCP flags includes SYN flag

Reported-by: Denys Fedoryshchenko <denys@visp.net.lb>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cc: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>

tcp: do_tcp_sendpages() must try to push data out on oom conditions

commit bad115cfe5b509043b684d3a007ab54b80090aa1 upstream.

Since recent changes on TCP splicing (starting with commits 2f533844
"tcp: allow splice() to build full TSO packets" and 35f9c09f "tcp:
tcp_sendpages() should call tcp_push() once"), I started seeing
massive stalls when forwarding traffic between two sockets using
splice() when pipe buffers were larger than socket buffers.

Latest changes (net: netdev_alloc_skb() use build_skb()) made the
problem even more apparent.

The reason seems to be that if do_tcp_sendpages() fails on out of memory
condition without being able to send at least one byte, tcp_push() is not
called and the buffers cannot be flushed.

After applying the attached patch, I cannot reproduce the stalls at all
and the data rate it perfectly stable and steady under any condition
which previously caused the problem to be permanent.

The issue seems to have been there since before the kernel migrated to
git, which makes me think that the stalls I occasionally experienced
with tux during stress-tests years ago were probably related to the
same issue.

This issue was first encountered on 3.0.31 and 3.2.17, so please backport
to -stable.

Signed-off-by: Willy Tarreau <w@1wt.eu>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>

ia64: Add accept4() syscall

commit 65cc21b4523e94d5640542a818748cd3be8cd6b4 upstream.

While debugging udev > 170 failure on Debian Wheezy
(http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=648325), it appears
that the issue was in fact due to missing accept4() in ia64.

This patch simply adds accept4() to ia64.

Signed-off-by: Ã\89meric Maschino <emeric.maschino@gmail.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Backported-by: Dennis Schridde <devurandom@gmx.net>
Signed-off-by: Willy Tarreau <w@1wt.eu>

dccp: check ccid before dereferencing

commit 276bdb82dedb290511467a5a4fdbe9f0b52dce6f upstream.

ccid_hc_rx_getsockopt() and ccid_hc_tx_getsockopt() might be called with
a NULL ccid pointer leading to a NULL pointer dereference. This could
lead to a privilege escalation if the attacker is able to map page 0 and
prepare it with a fake ccid_ops pointer.

Signed-off-by: Mathias Krause <minipli@googlemail.com>
Cc: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>

PARISC: Redefine ATOMIC_INIT and ATOMIC64_INIT to drop the casts

commit bba3d8c3b3c0f2123be5bc687d1cddc13437c923 upstream.

The following build error occured during a parisc build with
swap-over-NFS patches applied.

net/core/sock.c:274:36: error: initializer element is not constant
net/core/sock.c:274:36: error: (near initialization for 'memalloc_socks')
net/core/sock.c:274:36: error: initializer element is not constant

Dave Anglin says:
> Here is the line in sock.i:
>
> struct static_key memalloc_socks = ((struct static_key) { .enabled =
> ((atomic_t) { (0) }) });

The above line contains two compound literals.  It also uses a designated
initializer to initialize the field enabled.  A compound literal is not a
constant expression.

The location of the above statement isn't fully clear, but if a compound
literal occurs outside the body of a function, the initializer list must
consist of constant expressions.

Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Mel Gorman <mgorman@suse.de>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>

ext3: Fix fdatasync() for files with only i_size changes

commit 156bddd8e505b295540f3ca0e27dda68cb0d49aa upstream.

Code tracking when transaction needs to be committed on fdatasync(2) forgets
to handle a situation when only inode's i_size is changed. Thus in such
situations fdatasync(2) doesn't force transaction with new i_size to disk
and that can result in wrong i_size after a crash.

Fix the issue by updating inode's i_datasync_tid whenever its size is
updated.

Reported-by: Kristian Nielsen <knielsen@knielsen-hq.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>

udf: Fix data corruption for files in ICB

commit 9c2fc0de1a6e638fe58c354a463f544f42a90a09 upstream.

When a file is stored in ICB (inode), we overwrite part of the file, and
the page containing file's data is not in page cache, we end up corrupting
file's data by overwriting them with zeros. The problem is we use
simple_write_begin() which simply zeroes parts of the page which are not
written to. The problem has been introduced by be021ee4 (udf: convert to
new aops).

Fix the problem by providing a ->write_begin function which makes the page
properly uptodate.

Reported-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>

Remove user-triggerable BUG from mpol_to_str

commit 80de7c3138ee9fd86a98696fd2cf7ad89b995d0a upstream.

Trivially triggerable, found by trinity:

  kernel BUG at mm/mempolicy.c:2546!
  Process trinity-child2 (pid: 23988, threadinfo ffff88010197e000, task ffff88007821a670)
  Call Trace:
    show_numa_map+0xd5/0x450
    show_pid_numa_map+0x13/0x20
    traverse+0xf2/0x230
    seq_read+0x34b/0x3e0
    vfs_read+0xac/0x180
    sys_pread64+0xa2/0xc0
    system_call_fastpath+0x1a/0x1f
  RIP: mpol_to_str+0x156/0x360

Signed-off-by: Dave Jones <davej@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>

USB: CDC ACM: Fix NULL pointer dereference

commit 99f347caa4568cb803862730b3b1f1942639523f upstream.

If a device specifies zero endpoints in its interface descriptor,
the kernel oopses in acm_probe(). Even though that's clearly an
invalid descriptor, we should test wether we have all endpoints.
This is especially bad as this oops can be triggered by just
plugging a USB device in.

Signed-off-by: Sven Schnelle <svens@stackframe.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>

cciss: fix incorrect scsi status reporting

commit b0cf0b118c90477d1a6811f2cd2307f6a5578362 upstream.

Delete code which sets SCSI status incorrectly as it's already been set
correctly above this incorrect code.  The bug was introduced in 2009 by
commit b0e15f6db111 ("cciss: fix typo that causes scsi status to be
lost.")

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Reported-by: Roel van Meer <roel.vanmeer@bokxing.nl>
Tested-by: Roel van Meer <roel.vanmeer@bokxing.nl>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>

svcrpc: sends on closed socket should stop immediately

commit f06f00a24d76e168ecb38d352126fd203937b601 upstream.

svc_tcp_sendto sets XPT_CLOSE if we fail to transmit the entire reply.
However, the XPT_CLOSE won't be acted on immediately.  Meanwhile other
threads could send further replies before the socket is really shut
down.  This can manifest as data corruption: for example, if a truncated
read reply is followed by another rpc reply, that second reply will look
to the client like further read data.

Symptoms were data corruption preceded by svc_tcp_sendto logging
something like

kernel: rpc-srv/tcp: nfsd: sent only 963696 when sending 1048708 bytes - shutting down socket

Reported-by: Malahal Naineni <malahal@us.ibm.com>
Tested-by: Malahal Naineni <malahal@us.ibm.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>

svcrpc: fix svc_xprt_enqueue/svc_recv busy-looping

commit d10f27a750312ed5638c876e4bd6aa83664cccd8 upstream.

The rpc server tries to ensure that there will be room to send a reply
before it receives a request.

It does this by tracking, in xpt_reserved, an upper bound on the total
size of the replies that is has already committed to for the socket.

Currently it is adding in the estimate for a new reply *before* it
checks whether there is space available.  If it finds that there is not
space, it then subtracts the estimate back out.

This may lead the subsequent svc_xprt_enqueue to decide that there is
space after all.

The results is a svc_recv() that will repeatedly return -EAGAIN, causing
server threads to loop without doing any actual work.

Reported-by: Michael Tokarev <mjt@tls.msk.ru>
Tested-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>

NFS: Alias the nfs module to nfs4

commit 425e776d93a7a5070b77d4f458a5bab0f924652c upstream.

This allows distros to remove the line from their modprobe
configuration.

Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>

NFSv3: Ensure that do_proc_get_root() reports errors correctly

commit 086600430493e04b802bee6e5b3ce0458e4eb77f upstream.

If the rpc call to NFS3PROC_FSINFO fails, then we need to report that
error so that the mount fails. Otherwise we can end up with a
superblock with completely unusable values for block sizes, maxfilesize,
etc.

Reported-by: Yuanming Chen <hikvision_linux@163.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>

vfs: missed source of ->f_pos races

commit 0e665d5d1125f9f4ccff56a75e814f10f88861a2 upstream.

compat_sys_{read,write}v() need the same "pass a copy of file->f_pos" thing
as sys_{read,write}{,v}().

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>

ALSA: hda - fix Copyright debug message

commit 088c820b732dbfd515fc66d459d5f5777f79b406 upstream.

As spec said, 1 indicates no copyright is asserted.

Signed-off-by: Wang Xingchao <xingchao.wang@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>

usb: serial: mos7840: Fixup mos7840_chars_in_buffer()

commit 5c263b92f828af6a8cf54041db45ceae5af8f2ab upstream.

 * Use the buffer content length as opposed to the total buffer size.  This can
   be a real problem when using the mos7840 as a usb serial-console as all
   kernel output is truncated during boot.

Signed-off-by: Mark Ferrell <mferrell@uplogix.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>

xhci: Increase reset timeout for Renesas 720201 host.

commit 22ceac191211cf6688b1bf6ecd93c8b6bf80ed9b upstream.

The NEC/Renesas 720201 xHCI host controller does not complete its reset
within 250 milliseconds.  In fact, it takes about 9 seconds to reset the
host controller, and 1 second for the host to be ready for doorbell
rings.  Extend the reset and CNR polling timeout to 10 seconds each.

This patch should be backported to kernels as old as 2.6.31, that
contain the commit 66d4eadd8d067269ea8fead1a50fe87c2979a80d "USB: xhci:
BIOS handoff and HW initialization."

Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Reported-by: Edwin Klein Mentink <e.kleinmentink@zonnet.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>

fuse: verify all ioctl retry iov elements

commit fb6ccff667712c46b4501b920ea73a326e49626a upstream.

Commit 7572777eef78ebdee1ecb7c258c0ef94d35bad16 attempted to verify that
the total iovec from the client doesn't overflow iov_length() but it
only checked the first element.  The iovec could still overflow by
starting with a small element.  The obvious fix is to check all the
elements.

The overflow case doesn't look dangerous to the kernel as the copy is
limited by the length after the overflow.  This fix restores the
intention of returning an error instead of successfully copying less
than the iovec represented.

I found this by code inspection.  I built it but don't have a test case.
I'm cc:ing stable because the initial commit did as well.

Signed-off-by: Zach Brown <zab@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>

mm: mmu_notifier: fix freed page still mapped in secondary MMU

commit 3ad3d901bbcfb15a5e4690e55350db0899095a68 upstream.

mmu_notifier_release() is called when the process is exiting.  It will
delete all the mmu notifiers.  But at this time the page belonging to the
process is still present in page tables and is present on the LRU list, so
this race will happen:

      CPU 0                 CPU 1
mmu_notifier_release:    try_to_unmap:
   hlist_del_init_rcu(&mn->hlist);
                            ptep_clear_flush_notify:
                                  mmu nofifler not found
                            free page  !!!!!!
                            /*
                             * At the point, the page has been
                             * freed, but it is still mapped in
                             * the secondary MMU.
                             */

  mn->ops->release(mn, mm);

Then the box is not stable and sometimes we can get this bug:

[  738.075923] BUG: Bad page state in process migrate-perf  pfn:03bec
[  738.075931] page:ffffea00000efb00 count:0 mapcount:0 mapping:          (null) index:0x8076
[  738.075936] page flags: 0x20000000000014(referenced|dirty)

The same issue is present in mmu_notifier_unregister().

We can call ->release before deleting the notifier to ensure the page has
been unmapped from the secondary MMU before it is freed.

Signed-off-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Cc: Avi Kivity <avi@redhat.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>

pcdp: use early_ioremap/early_iounmap to access pcdp table

commit 6c4088ac3a4d82779903433bcd5f048c58fb1aca upstream.

efi_setup_pcdp_console() is called during boot to parse the HCDP/PCDP
EFI system table and setup an early console for printk output.  The
routine uses ioremap/iounmap to setup access to the HCDP/PCDP table
information.

The call to ioremap is happening early in the boot process which leads
to a panic on x86_64 systems:

    panic+0x01ca
    do_exit+0x043c
    oops_end+0x00a7
    no_context+0x0119
    __bad_area_nosemaphore+0x0138
    bad_area_nosemaphore+0x000e
    do_page_fault+0x0321
    page_fault+0x0020
    reserve_memtype+0x02a1
    __ioremap_caller+0x0123
    ioremap_nocache+0x0012
    efi_setup_pcdp_console+0x002b
    setup_arch+0x03a9
    start_kernel+0x00d4
    x86_64_start_reservations+0x012c
    x86_64_start_kernel+0x00fe

This replaces the calls to ioremap/iounmap in efi_setup_pcdp_console()
with calls to early_ioremap/early_iounmap which can be called during
early boot.

This patch was tested on an x86_64 prototype system which uses the
HCDP/PCDP table for early console setup.

Signed-off-by: Greg Pearson <greg.pearson@hp.com>
Acked-by: Khalid Aziz <khalid.aziz@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>

futex: Forbid uaddr == uaddr2 in futex_wait_requeue_pi()

commit 6f7b0a2a5c0fb03be7c25bd1745baa50582348ef upstream.

If uaddr == uaddr2, then we have broken the rule of only requeueing
from a non-pi futex to a pi futex with this call. If we attempt this,
as the trinity test suite manages to do, we miss early wakeups as
q.key is equal to key2 (because they are the same uaddr). We will then
attempt to dereference the pi_mutex (which would exist had the futex_q
been properly requeued to a pi futex) and trigger a NULL pointer
dereference.

Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Cc: Dave Jones <davej@redhat.com>
Link: http://lkml.kernel.org/r/ad82bfe7f7d130247fbe2b5b4275654807774227.1342809673.git.dvhart@linux.intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>

futex: Fix bug in WARN_ON for NULL q.pi_state

commit f27071cb7fe3e1d37a9dbe6c0dfc5395cd40fa43 upstream.

The WARN_ON in futex_wait_requeue_pi() for a NULL q.pi_state was testing
the address (&q.pi_state) of the pointer instead of the value
(q.pi_state) of the pointer. Correct it accordingly.

Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Cc: Dave Jones <davej@redhat.com>
Link: http://lkml.kernel.org/r/1c85d97f6e5f79ec389a4ead3e367363c74bd09a.1342809673.git.dvhart@linux.intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>

futex: Test for pi_mutex on fault in futex_wait_requeue_pi()

commit b6070a8d9853eda010a549fa9a09eb8d7269b929 upstream.

If fixup_pi_state_owner() faults, pi_mutex may be NULL. Test
for pi_mutex != NULL before testing the owner against current
and possibly unlocking it.

Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Cc: Dave Jones <davej@redhat.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Link: http://lkml.kernel.org/r/dc59890338fc413606f04e5c5b131530734dae3d.1342809673.git.dvhart@linux.intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>

ALSA: mpu401: Fix missing initialization of irq field

commit bc733d495267a23ef8660220d696c6e549ce30b3 upstream.

The irq field of struct snd_mpu401 is supposed to be initialized to -1.
Since it's set to zero as of now, a probing error before the irq
installation results in a kernel warning "Trying to free already-free
IRQ 0".

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=44821
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>

USB: echi-dbgp: increase the controller wait time to come out of halt.

commit f96a4216e85050c0a9d41a41ecb0ae9d8e39b509 upstream.

The default 10 microsecond delay for the controller to come out of
halt in dbgp_ehci_startup is too short, so increase it to 1 millisecond.

This is based on emperical testing on various USB debug ports on
modern machines such as a Lenovo X220i and an Ivybridge development
platform that needed to wait ~450-950 microseconds.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>

net/tun: fix ioctl() based info leaks

[ Upstream commits a117dacde0288f3ec60b6e5bcedae8fa37ee0dfc
  and 8bbb181308bc348e02bfdbebdedd4e4ec9d452ce ]

The tun module leaks up to 36 bytes of memory by not fully initializing
a structure located on the stack that gets copied to user memory by the
TUNGETIFF and SIOCGIFHWADDR ioctl()s.

Signed-off-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>

tcp: perform DMA to userspace only if there is a task waiting for it

[ Upstream commit 59ea33a68a9083ac98515e4861c00e71efdc49a1 ]

Back in 2006, commit 1a2449a87b ("[I/OAT]: TCP recv offload to I/OAT")
added support for receive offloading to IOAT dma engine if available.

The code in tcp_rcv_established() tries to perform early DMA copy if
applicable. It however does so without checking whether the userspace
task is actually expecting the data in the buffer.

This is not a problem under normal circumstances, but there is a corner
case where this doesn't work -- and that's when MSG_TRUNC flag to
recvmsg() is used.

If the IOAT dma engine is not used, the code properly checks whether
there is a valid ucopy.task and the socket is owned by userspace, but
misses the check in the dmaengine case.

This problem can be observed in real trivially -- for example 'tbench' is a
good reproducer, as it makes a heavy use of MSG_TRUNC. On systems utilizing
IOAT, you will soon find tbench waiting indefinitely in sk_wait_data(), as they
have been already early-copied in tcp_rcv_established() using dma engine.

This patch introduces the same check we are performing in the simple
iovec copy case to the IOAT case as well. It fixes the indefinite
recvmsg(MSG_TRUNC) hangs.

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>

USB: kaweth.c: use GFP_ATOMIC under spin_lock

[ Upstream commit e4c7f259c5be99dcfc3d98f913590663b0305bf8 ]

The problem is that we call this with a spin lock held.  The call tree
is:
kaweth_start_xmit() holds kaweth->device_lock.
-> kaweth_async_set_rx_mode()
   -> kaweth_control()
      -> kaweth_internal_control_msg()

The kaweth_internal_control_msg() function is only called from
kaweth_control() which used GFP_ATOMIC for its allocations.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>

wanmain: comparing array with NULL

[ Upstream commit 8b72ff6484fe303e01498b58621810a114f3cf09 ]

gcc really should warn about these !

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>

cipso: don't follow a NULL pointer when setsockopt() is called

[ Upstream commit 89d7ae34cdda4195809a5a987f697a517a2a3177 ]

As reported by Alan Cox, and verified by Lin Ming, when a user
attempts to add a CIPSO option to a socket using the CIPSO_V4_TAG_LOCAL
tag the kernel dies a terrible death when it attempts to follow a NULL
pointer (the skb argument to cipso_v4_validate() is NULL when called via
the setsockopt() syscall).

This patch fixes this by first checking to ensure that the skb is
non-NULL before using it to find the incoming network interface.  In
the unlikely case where the skb is NULL and the user attempts to add
a CIPSO option with the _TAG_LOCAL tag we return an error as this is
not something we want to allow.

A simple reproducer, kindly supplied by Lin Ming, although you must
have the CIPSO DOI #3 configure on the system first or you will be
caught early in cipso_v4_validate():

#include <sys/types.h>
#include <sys/socket.h>
#include <linux/ip.h>
#include <linux/in.h>
#include <string.h>

struct local_tag {
char type;
char length;
char info[4];
};

struct cipso {
char type;
char length;
char doi[4];
struct local_tag local;
};

int main(int argc, char **argv)
{
int sockfd;
struct cipso cipso = {
.type = IPOPT_CIPSO,
.length = sizeof(struct cipso),
.local = {
.type = 128,
.length = sizeof(struct local_tag),
},
};

memset(cipso.doi, 0, 4);
cipso.doi[3] = 3;

sockfd = socket(AF_INET, SOCK_DGRAM, 0);
#define SOL_IP 0
setsockopt(sockfd, SOL_IP, IP_OPTIONS,
&cipso, sizeof(struct cipso));

return 0;
}

CC: Lin Ming <mlin@ss.pku.edu.cn>
Reported-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Paul Moore <pmoore@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>

sctp: Fix list corruption resulting from freeing an association on a list

[ Upstream commit 2eebc1e188e9e45886ee00662519849339884d6d ]

A few days ago Dave Jones reported this oops:

[22766.294255] general protection fault: 0000 [#1] PREEMPT SMP
[22766.295376] CPU 0
[22766.295384] Modules linked in:
[22766.387137]  ffffffffa169f292 6b6b6b6b6b6b6b6b ffff880147c03a90
ffff880147c03a74
[22766.387135] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 00000000000
[22766.387136] Process trinity-watchdo (pid: 10896, threadinfo ffff88013e7d2000,
[22766.387137] Stack:
[22766.387140]  ffff880147c03a10
[22766.387140]  ffffffffa169f2b6
[22766.387140]  ffff88013ed95728
[22766.387143]  0000000000000002
[22766.387143]  0000000000000000
[22766.387143]  ffff880003fad062
[22766.387144]  ffff88013c120000
[22766.387144]
[22766.387145] Call Trace:
[22766.387145]  <IRQ>
[22766.387150]  [<ffffffffa169f292>] ? __sctp_lookup_association+0x62/0xd0
[sctp]
[22766.387154]  [<ffffffffa169f2b6>] __sctp_lookup_association+0x86/0xd0 [sctp]
[22766.387157]  [<ffffffffa169f597>] sctp_rcv+0x207/0xbb0 [sctp]
[22766.387161]  [<ffffffff810d4da8>] ? trace_hardirqs_off_caller+0x28/0xd0
[22766.387163]  [<ffffffff815827e3>] ? nf_hook_slow+0x133/0x210
[22766.387166]  [<ffffffff815902fc>] ? ip_local_deliver_finish+0x4c/0x4c0
[22766.387168]  [<ffffffff8159043d>] ip_local_deliver_finish+0x18d/0x4c0
[22766.387169]  [<ffffffff815902fc>] ? ip_local_deliver_finish+0x4c/0x4c0
[22766.387171]  [<ffffffff81590a07>] ip_local_deliver+0x47/0x80
[22766.387172]  [<ffffffff8158fd80>] ip_rcv_finish+0x150/0x680
[22766.387174]  [<ffffffff81590c54>] ip_rcv+0x214/0x320
[22766.387176]  [<ffffffff81558c07>] __netif_receive_skb+0x7b7/0x910
[22766.387178]  [<ffffffff8155856c>] ? __netif_receive_skb+0x11c/0x910
[22766.387180]  [<ffffffff810d423e>] ? put_lock_stats.isra.25+0xe/0x40
[22766.387182]  [<ffffffff81558f83>] netif_receive_skb+0x23/0x1f0
[22766.387183]  [<ffffffff815596a9>] ? dev_gro_receive+0x139/0x440
[22766.387185]  [<ffffffff81559280>] napi_skb_finish+0x70/0xa0
[22766.387187]  [<ffffffff81559cb5>] napi_gro_receive+0xf5/0x130
[22766.387218]  [<ffffffffa01c4679>] e1000_receive_skb+0x59/0x70 [e1000e]
[22766.387242]  [<ffffffffa01c5aab>] e1000_clean_rx_irq+0x28b/0x460 [e1000e]
[22766.387266]  [<ffffffffa01c9c18>] e1000e_poll+0x78/0x430 [e1000e]
[22766.387268]  [<ffffffff81559fea>] net_rx_action+0x1aa/0x3d0
[22766.387270]  [<ffffffff810a495f>] ? account_system_vtime+0x10f/0x130
[22766.387273]  [<ffffffff810734d0>] __do_softirq+0xe0/0x420
[22766.387275]  [<ffffffff8169826c>] call_softirq+0x1c/0x30
[22766.387278]  [<ffffffff8101db15>] do_softirq+0xd5/0x110
[22766.387279]  [<ffffffff81073bc5>] irq_exit+0xd5/0xe0
[22766.387281]  [<ffffffff81698b03>] do_IRQ+0x63/0xd0
[22766.387283]  [<ffffffff8168ee2f>] common_interrupt+0x6f/0x6f
[22766.387283]  <EOI>
[22766.387284]
[22766.387285]  [<ffffffff8168eed9>] ? retint_swapgs+0x13/0x1b
[22766.387285] Code: c0 90 5d c3 66 0f 1f 44 00 00 4c 89 c8 5d c3 0f 1f 00 55 48
89 e5 48 83
ec 20 48 89 5d e8 4c 89 65 f0 4c 89 6d f8 66 66 66 66 90 <0f> b7 87 98 00 00 00
48 89 fb
49 89 f5 66 c1 c0 08 66 39 46 02
[22766.387307]
[22766.387307] RIP
[22766.387311]  [<ffffffffa168a2c9>] sctp_assoc_is_match+0x19/0x90 [sctp]
[22766.387311]  RSP <ffff880147c039b0>
[22766.387142]  ffffffffa16ab120
[22766.599537] ---[ end trace 3f6dae82e37b17f5 ]---
[22766.601221] Kernel panic - not syncing: Fatal exception in interrupt

It appears from his analysis and some staring at the code that this is likely
occuring because an association is getting freed while still on the
sctp_assoc_hashtable.  As a result, we get a gpf when traversing the hashtable
while a freed node corrupts part of the list.

Nominally I would think that an mibalanced refcount was responsible for this,
but I can't seem to find any obvious imbalance.  What I did note however was
that the two places where we create an association using
sctp_primitive_ASSOCIATE (__sctp_connect and sctp_sendmsg), have failure paths
which free a newly created association after calling sctp_primitive_ASSOCIATE.
sctp_primitive_ASSOCIATE brings us into the sctp_sf_do_prm_asoc path, which
issues a SCTP_CMD_NEW_ASOC side effect, which in turn adds a new association to
the aforementioned hash table.  the sctp command interpreter that process side
effects has not way to unwind previously processed commands, so freeing the
association from the __sctp_connect or sctp_sendmsg error path would lead to a
freed association remaining on this hash table.

I've fixed this but modifying sctp_[un]hash_established to use hlist_del_init,
which allows us to proerly use hlist_unhashed to check if the node is on a
hashlist safely during a delete.  That in turn alows us to safely call
sctp_unhash_established in the __sctp_connect and sctp_sendmsg error paths
before freeing them, regardles of what the associations state is on the hash
list.

I noted, while I was doing this, that the __sctp_unhash_endpoint was using
hlist_unhsashed in a simmilar fashion, but never nullified any removed nodes
pointers to make that function work properly, so I fixed that up in a simmilar
fashion.

I attempted to test this using a virtual guest running the SCTP_RR test from
netperf in a loop while running the trinity fuzzer, both in a loop.  I wasn't
able to recreate the problem prior to this fix, nor was I able to trigger the
failure after (neither of which I suppose is suprising).  Given the trace above
however, I think its likely that this is what we hit.

Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Reported-by: davej@redhat.com
CC: davej@redhat.com
CC: "David S. Miller" <davem@davemloft.net>
CC: Vlad Yasevich <vyasevich@gmail.com>
CC: Sridhar Samudrala <sri@us.ibm.com>
CC: linux-sctp@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>

ext4: don't let i_reserved_meta_blocks go negative

commit 97795d2a5b8d3c8dc4365d4bd3404191840453ba upstream.

If we hit a condition where we have allocated metadata blocks that
were not appropriately reserved, we risk underflow of
ei->i_reserved_meta_blocks.  In turn, this can throw
sbi->s_dirtyclusters_counter significantly out of whack and undermine
the nondelalloc fallback logic in ext4_nonda_switch().  Warn if this
occurs and set i_allocated_meta_blocks to avoid this problem.

This condition is reproduced by xfstests 270 against ext2 with
delalloc enabled:

Mar 28 08:58:02 localhost kernel: [  171.526344] EXT4-fs (loop1): delayed block allocation failed for inode 14 at logical offset 64486 with max blocks 64 with error -28
Mar 28 08:58:02 localhost kernel: [  171.526346] EXT4-fs (loop1): This should not happen!! Data will be lost

270 ultimately fails with an inconsistent filesystem and requires an
fsck to repair.  The cause of the error is an underflow in
ext4_da_update_reserve_space() due to an unreserved meta block
allocation.

Signed-off-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>

nfsd4: our filesystems are normally case sensitive

commit 2930d381d22b9c56f40dd4c63a8fa59719ca2c3c upstream.

Actually, xfs and jfs can optionally be case insensitive; we'll handle
that case in later patches.

Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>

Btrfs: call the ordered free operation without any locks held

commit e9fbcb42201c862fd6ab45c48ead4f47bb2dea9d upstream.

Each ordered operation has a free callback, and this was called with the
worker spinlock held.  Josef made the free callback also call iput,
which we can't do with the spinlock.

This drops the spinlock for the free operation and grabs it again before
moving through the rest of the list.  We'll circle back around to this
and find a cleaner way that doesn't bounce the lock around so much.

Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>

ACPI/AC: prevent OOPS on some boxes due to missing check power_supply_register() return value check

commit f197ac13f6eeb351b31250b9ab7d0da17434ea36 upstream.

In the ac.c, power_supply_register()'s return value is not checked.

As a result, the driver's add() ops may return success
even though the device failed to initialize.

For example, some BIOS may describe two ACADs in the same DSDT.
The second ACAD device will fail to register,
but ACPI driver's add() ops returns sucessfully.
The ACPI device will receive ACPI notification and cause OOPS.

https://bugzilla.redhat.com/show_bug.cgi?id=772730

Signed-off-by: Lan Tianyu <tianyu.lan@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>

locks: fix checking of fcntl_setlease argument

commit 0ec4f431eb56d633da3a55da67d5c4b88886ccc7 upstream.

The only checks of the long argument passed to fcntl(fd,F_SETLEASE,.)
are done after converting the long to an int.  Thus some illegal values
may be let through and cause problems in later code.

[ They actually *don't* cause problems in mainline, as of Dave Jones's
  commit 8d657eb3b438 "Remove easily user-triggerable BUG from
  generic_setlease", but we should fix this anyway.  And this patch will
  be necessary to fix real bugs on earlier kernels. ]

Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>

usbdevfs: Correct amount of data copied to user in processcompl_compat

commit 2102e06a5f2e414694921f23591f072a5ba7db9f upstream.

iso data buffers may have holes in them if some packets were short, so for
iso urbs we should always copy the entire buffer, just like the regular
processcompl does.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>

SCSI: Avoid dangling pointer in scsi_requeue_command()

commit 940f5d47e2f2e1fa00443921a0abf4822335b54d upstream.

When we call scsi_unprep_request() the command associated with the request
gets destroyed and therefore drops its reference on the device.  If this was
the only reference, the device may get released and we end up with a NULL
pointer deref when we call blk_requeue_request.

Reported-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Reviewed-by: Tejun Heo <tj@kernel.org>
[jejb: enhance commend and add commit log for stable]
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>

SCSI: fix eh wakeup (scsi_schedule_eh vs scsi_restart_operations)

commit 57fc2e335fd3c2f898ee73570dc81426c28dc7b4 upstream.

Rapid ata hotplug on a libsas controller results in cases where libsas
is waiting indefinitely on eh to perform an ata probe.

A race exists between scsi_schedule_eh() and scsi_restart_operations()
in the case when scsi_restart_operations() issues i/o to other devices
in the sas domain.  When this happens the host state transitions from
SHOST_RECOVERY (set by scsi_schedule_eh) back to SHOST_RUNNING and
->host_busy is non-zero so we put the eh thread to sleep even though
->host_eh_scheduled is active.

Before putting the error handler to sleep we need to check if the
host_state needs to return to SHOST_RECOVERY for another trip through
eh.  Since i/o that is released by scsi_restart_operations has been
blocked for at least one eh cycle, this implementation allows those
i/o's to run before another eh cycle starts to discourage hung task
timeouts.

Reported-by: Tom Jackson <thomas.p.jackson@intel.com>
Tested-by: Tom Jackson <thomas.p.jackson@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>

SCSI: libsas: fix sas_discover_devices return code handling

commit b17caa174a7e1fd2e17b26e210d4ee91c4c28b37 upstream.

commit 198439e4 [SCSI] libsas: do not set res = 0 in sas_ex_discover_dev()
commit 19252de6 [SCSI] libsas: fix wide port hotplug issues

The above commits seem to have confused the return value of
sas_ex_discover_dev which is non-zero on failure and
sas_ex_join_wide_port which just indicates short circuiting discovery on
already established ports.  The result is random discovery failures
depending on configuration.

Calls to sas_ex_join_wide_port are the source of the trouble as its
return value is errantly assigned to 'res'.  Convert it to bool and stop
returning its result up the stack.

Tested-by: Dan Melnic <dan.melnic@amd.com>
Reported-by: Dan Melnic <dan.melnic@amd.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Jack Wang <jack_wang@usish.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>

SCSI: libsas: continue revalidation

commit 26f2f199ff150d8876b2641c41e60d1c92d2fb81 upstream.

Continue running revalidation until no more broadcast devices are
discovered.  Fixes cases where re-discovery completes too early in a
domain with multiple expanders with pending re-discovery events.
Servicing BCNs can get backed up behind error recovery.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>

powerpc: Add "memory" attribute for mfmsr()

commit b416c9a10baae6a177b4f9ee858b8d309542fbef upstream.

Add "memory" attribute in inline assembly language as a compiler
barrier to make sure 4.6.x GCC don't reorder mfmsr().

Signed-off-by: Tiejun Chen <tiejun.chen@windriver.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>

powerpc/ftrace: Fix assembly trampoline register usage

commit fd5a42980e1cf327b7240adf5e7b51ea41c23437 upstream.

Just like the module loader, ftrace needs to be updated to use r12
instead of r11 with newer gcc's.

Signed-off-by: Roger Blofeld <blofeldus@yahoo.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>

MIPS: Properly align the .data..init_task section.

commit 7b1c0d26a8e272787f0f9fcc5f3e8531df3b3409 upstream.

Improper alignment can lead to unbootable systems and/or random
crashes.

[ralf@linux-mips.org: This is a lond standing bug since
6eb10bc9e2deab06630261cd05c4cb1e9a60e980 (kernel.org) rsp.
c422a10917f75fd19fa7fe070aaaa23e384dae6f (lmo) [MIPS: Clean up linker script
using new linker script macros.] so dates back to 2.6.32.]

Signed-off-by: David Daney <david.daney@cavium.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/3881/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>

ntp: Fix STA_INS/DEL clearing bug

commit 6b1859dba01c7d512b72d77e3fd7da8354235189 upstream.

In commit 6b43ae8a619d17c4935c3320d2ef9e92bdeed05d, I
introduced a bug that kept the STA_INS or STA_DEL bit
from being cleared from time_status via adjtimex()
without forcing STA_PLL first.

Usually once the STA_INS is set, it isn't cleared
until the leap second is applied, so its unlikely this
affected anyone. However during testing I noticed it
took some effort to cancel a leap second once STA_INS
was set.

Signed-off-by: John Stultz <johnstul@us.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Link: http://lkml.kernel.org/r/1342156917-25092-2-git-send-email-john.stultz@linaro.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>

mm: Hold a file reference in madvise_remove

commit 9ab4233dd08036fe34a89c7dc6f47a8bf2eb29eb upstream.

Otherwise the code races with munmap (causing a use-after-free
of the vma) or with close (causing a use-after-free of the struct
file).

The bug was introduced by commit 90ed52ebe481 ("[PATCH] holepunch: fix
mmap_sem i_mutex deadlock")

[bwh: Backported to 3.2:
 - Adjust context
 - madvise_remove() calls vmtruncate_range(), not do_fallocate()]
[luto: Backported to 3.0: Adjust context]

Cc: Hugh Dickins <hugh@veritas.com>
Cc: Miklos Szeredi <mszeredi@suse.cz>
Cc: Badari Pulavarty <pbadari@us.ibm.com>
Cc: Nick Piggin <npiggin@suse.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>

USB: cdc-wdm: fix lockup on error in wdm_read

commit b086b6b10d9f182cd8d2f0dcfd7fd11edba93fc9 upstream.

Clear the WDM_READ flag on empty reads to avoid running
forever in an infinite tight loop, causing lockups:

Jul  1 21:58:11 nemi kernel: [ 3658.898647] qmi_wwan 2-1:1.2: Unexpected error -71
Jul  1 21:58:36 nemi kernel: [ 3684.072021] BUG: soft lockup - CPU#0 stuck for 23s! [qmi.pl:12235]
Jul  1 21:58:36 nemi kernel: [ 3684.072212] CPU 0
Jul  1 21:58:36 nemi kernel: [ 3684.072355]
Jul  1 21:58:36 nemi kernel: [ 3684.072367] Pid: 12235, comm: qmi.pl Tainted: P           O 3.5.0-rc2+ #13 LENOVO 2776LEG/2776LEG
Jul  1 21:58:36 nemi kernel: [ 3684.072383] RIP: 0010:[<ffffffffa0635008>]  [<ffffffffa0635008>] spin_unlock_irq+0x8/0xc [cdc_wdm]
Jul  1 21:58:36 nemi kernel: [ 3684.072388] RSP: 0018:ffff88022dca1e70  EFLAGS: 00000282
Jul  1 21:58:36 nemi kernel: [ 3684.072393] RAX: ffff88022fc3f650 RBX: ffffffff811c56f7 RCX: 00000001000ce8c1
Jul  1 21:58:36 nemi kernel: [ 3684.072398] RDX: 0000000000000010 RSI: 000000000267d810 RDI: ffff88022fc3f650
Jul  1 21:58:36 nemi kernel: [ 3684.072403] RBP: ffff88022dca1eb0 R08: ffffffffa063578e R09: 0000000000000000
Jul  1 21:58:36 nemi kernel: [ 3684.072407] R10: 0000000000000008 R11: 0000000000000246 R12: 0000000000000002
Jul  1 21:58:36 nemi kernel: [ 3684.072412] R13: 0000000000000246 R14: ffffffff00000002 R15: ffff8802281d8c88
Jul  1 21:58:36 nemi kernel: [ 3684.072418] FS:  00007f666a260700(0000) GS:ffff88023bc00000(0000) knlGS:0000000000000000
Jul  1 21:58:36 nemi kernel: [ 3684.072423] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
Jul  1 21:58:36 nemi kernel: [ 3684.072428] CR2: 000000000270d9d8 CR3: 000000022e865000 CR4: 00000000000007f0
Jul  1 21:58:36 nemi kernel: [ 3684.072433] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
Jul  1 21:58:36 nemi kernel: [ 3684.072438] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Jul  1 21:58:36 nemi kernel: [ 3684.072444] Process qmi.pl (pid: 12235, threadinfo ffff88022dca0000, task ffff88022ff76380)
Jul  1 21:58:36 nemi kernel: [ 3684.072448] Stack:
Jul  1 21:58:36 nemi kernel: [ 3684.072458]  ffffffffa063592e 0000000100020000 ffff88022fc3f650 ffff88022fc3f6a8
Jul  1 21:58:36 nemi kernel: [ 3684.072466]  0000000000000200 0000000100000000 000000000267d810 0000000000000000
Jul  1 21:58:36 nemi kernel: [ 3684.072475]  0000000000000000 ffff880212cfb6d0 0000000000000200 ffff880212cfb6c0
Jul  1 21:58:36 nemi kernel: [ 3684.072479] Call Trace:
Jul  1 21:58:36 nemi kernel: [ 3684.072489]  [<ffffffffa063592e>] ? wdm_read+0x1a0/0x263 [cdc_wdm]
Jul  1 21:58:36 nemi kernel: [ 3684.072500]  [<ffffffff8110adb7>] ? vfs_read+0xa1/0xfb
Jul  1 21:58:36 nemi kernel: [ 3684.072509]  [<ffffffff81040589>] ? alarm_setitimer+0x35/0x64
Jul  1 21:58:36 nemi kernel: [ 3684.072517]  [<ffffffff8110aec7>] ? sys_read+0x45/0x6e
Jul  1 21:58:36 nemi kernel: [ 3684.072525]  [<ffffffff813725f9>] ? system_call_fastpath+0x16/0x1b
Jul  1 21:58:36 nemi kernel: [ 3684.072557] Code: <66> 66 90 c3 83 ff ed 89 f8 74 16 7f 06 83 ff a1 75 0a c3 83 ff f4

The WDM_READ flag is normally cleared by wdm_int_callback
before resubmitting the read urb, and set by wdm_in_callback
when this urb returns with data or an error.  But a crashing
device may cause both a read error and cancelling all urbs.
Make sure that the flag is cleared by wdm_read if the buffer
is empty.

We don't clear the flag on errors, as there may be pending
data in the buffer which should be processed.  The flag will
instead be cleared on the next wdm_read call.

Signed-off-by: Bjørn Mork <bjorn@mork.no>
Acked-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>

eCryptfs: Properly check for O_RDONLY flag before doing privileged open

commit 9fe79d7600497ed8a95c3981cbe5b73ab98222f0 upstream.

If the first attempt at opening the lower file read/write fails,
eCryptfs will retry using a privileged kthread. However, the privileged
retry should not happen if the lower file's inode is read-only because a
read/write open will still be unsuccessful.

The check for determining if the open should be retried was intended to
be based on the access mode of the lower file's open flags being
O_RDONLY, but the check was incorrectly performed. This would cause the
open to be retried by the privileged kthread, resulting in a second
failed open of the lower file. This patch corrects the check to
determine if the open request should be handled by the privileged
kthread.

Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>

stable: Allow merging of backports for serious user-visible performance issues

commit eb3979f64d25120d60b9e761a4c58f70b1a02f86 upstream.

Distribution kernel maintainers routinely backport fixes for users that
were deemed important but not "something critical" as defined by the
rules. To users of these kernels they are very serious and failing to fix
them reduces the value of -stable.

The problem is that the patches fixing these issues are often subtle and
prone to regressions in other ways and need greater care and attention.
To combat this, these "serious" backports should have a higher barrier
to entry.

This patch relaxes the rules to allow a distribution maintainer to merge
to -stable a backported patch or small series that fixes a "serious"
user-visible performance issue. They should include additional information on
the user-visible bug affected and a link to the bugzilla entry if available.
The same rules about the patch being already in mainline still apply.

Signed-off-by: Mel Gorman <mgorman@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>

udf: Improve table length check to avoid possible overflow

commit 57b9655d01ef057a523e810d29c37ac09b80eead upstream.

When a partition table length is corrupted to be close to 1 << 32, the
check for its length may overflow on 32-bit systems and we will think
the length is valid. Later on the kernel can crash trying to read beyond
end of buffer. Fix the check to avoid possible overflow.

CC: stable@vger.kernel.org
Reported-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Willy Tarreau <w@1wt.eu>

udf: Avoid run away loop when partition table length is corrupted

commit adee11b2085bee90bd8f4f52123ffb07882d6256 upstream.

Check provided length of partition table so that (possibly maliciously)
corrupted partition table cannot cause accessing data beyond current buffer.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>

fuse: fix stat call on 32 bit platforms

commit 45c72cd73c788dd18c8113d4a404d6b4a01decf1 upstream.

Now we store attr->ino at inode->i_ino, return attr->ino at the
first time and then return inode->i_ino if the attribute timeout
isn't expired. That's wrong on 32 bit platforms because attr->ino
is 64 bit and inode->i_ino is 32 bit in this case.

Fix this by saving 64 bit ino in fuse_inode structure and returning
it every time we call getattr. Also squash attr->ino into inode->i_ino
explicitly.

Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>

powerpc: Fix kernel panic during kernel module load

commit 3c75296562f43e6fbc6cddd3de948a7b3e4e9bcf upstream.

This fixes a problem which can causes kernel oopses while loading
a kernel module.

According to the PowerPC EABI specification, GPR r11 is assigned
the dedicated function to point to the previous stack frame.
In the powerpc-specific kernel module loader, do_plt_call()
(in arch/powerpc/kernel/module_32.c), GPR r11 is also used
to generate trampoline code.

This combination crashes the kernel, in the case where the compiler
chooses to use a helper function for saving GPRs on entry, and the
module loader has placed the .init.text section far away from the
.text section, meaning that it has to generate a trampoline for
functions in the .init.text section to call the GPR save helper.
Because the trampoline trashes r11, references to the stack frame
using r11 can cause an oops.

The fix just uses GPR r12 instead of GPR r11 for generating the
trampoline code.  According to the statements from Freescale, this is
safe from an EABI perspective.

I've tested the fix for kernel 2.6.33 on MPC8541.

Signed-off-by: Steffen Rumler <steffen.rumler.ext@nsn.com>
[paulus@samba.org: reworded the description]
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>

SCSI: fix scsi_wait_scan

commit 1ff2f40305772b159a91c19590ee159d3a504afc upstream.

Commit  c751085943362143f84346d274e0011419c84202
Author: Rafael J. Wysocki <rjw@sisk.pl>
Date:   Sun Apr 12 20:06:56 2009 +0200

    PM/Hibernate: Wait for SCSI devices scan to complete during resume

Broke the scsi_wait_scan module in 2.6.30.  Apparently debian still uses it so
fix it and backport to stable before removing it in 3.6.

The breakage is caused because the function template in
include/scsi/scsi_scan.h is defined to be a nop unless SCSI is built in.
That means that in the modular case (which is every distro), the
scsi_wait_scan module does a simple async_synchronize_full() instead of
waiting for scans.

Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>

xhci: Reset reserved command ring TRBs on cleanup.

commit 33b2831ac870d50cc8e01c317b07fb1e69c13fe1 upstream.

When the xHCI driver needs to clean up memory (perhaps due to a failed
register restore on resume from S3 or resume from S4), it needs to reset
the number of reserved TRBs on the command ring to zero.  Otherwise,
several resume cycles (about 30) with a UAS device attached will
continually increment the number of reserved TRBs, until all command
submissions fail because there isn't enough room on the command ring.

This patch should be backported to kernels as old as 2.6.32,
that contain the commit 913a8a344ffcaf0b4a586d6662a2c66a7106557d
"USB: xhci: Change how xHCI commands are handled."

Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>

ext4: fix error handling on inode bitmap corruption

commit acd6ad83517639e8f09a8c5525b1dccd81cd2a10 upstream.

When insert_inode_locked() fails in ext4_new_inode() it most likely means inode
bitmap got corrupted and we allocated again inode which is already in use. Also
doing unlock_new_inode() during error recovery is wrong since the inode does
not have I_NEW set. Fix the problem by jumping to fail: (instead of fail_drop:)
which declares filesystem error and does not call unlock_new_inode().

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>

ext3: Fix error handling on inode bitmap corruption

commit 1415dd8705394399d59a3df1ab48d149e1e41e77 upstream.

When insert_inode_locked() fails in ext3_new_inode() it most likely
means inode bitmap got corrupted and we allocated again inode which
is already in use. Also doing unlock_new_inode() during error recovery
is wrong since inode does not have I_NEW set. Fix the problem by jumping
to fail: (instead of fail_drop:) which declares filesystem error and
does not call unlock_new_inode().

Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>

NFSv4: Revalidate uid/gid after open

This is a shorter (and more appropriate for stable kernels) analog to
the following upstream commit:

commit 6926afd1925a54a13684ebe05987868890665e2b
Author: Trond Myklebust <Trond.Myklebust@netapp.com>
Date:   Sat Jan 7 13:22:46 2012 -0500

    NFSv4: Save the owner/group name string when doing open

    ...so that we can do the uid/gid mapping outside the asynchronous RPC
    context.
    This fixes a bug in the current NFSv4 atomic open code where the client
    isn't able to determine what the true uid/gid fields of the file are,
    (because the asynchronous nature of the OPEN call denies it the ability
    to do an upcall) and so fills them with default values, marking the
    inode as needing revalidation.
    Unfortunately, in some cases, the VFS will do some additional sanity
    checks on the file, and may override the server's decision to allow
    the open because it sees the wrong owner/group fields.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Without this patch, logging into two different machines with home
directories mounted over NFS4 and then running "vim" and typing ":q"
in each reliably produces the following error on the second machine:

E137: Viminfo file is not writable: /users/system/rtheys/.viminfo

This regression was introduced by 80e52aced138 ("NFSv4: Don't do
idmapper upcalls for asynchronous RPC calls", merged during the 2.6.32
cycle) --- after the OPEN call, .viminfo has the default values for
st_uid and st_gid (0xfffffffe) cached because we do not want to let
rpciod wait for an idmapper upcall to fill them in.

The fix used in mainline is to save the owner and group as strings and
perform the upcall in _nfs4_proc_open outside the rpciod context,
which takes about 600 lines.  For stable, we can do something similar
with a one-liner: make open check for the stale fields and make a
(synchronous) GETATTR call to fill them when needed.

Trond dictated the patch, I typed it in, and Rik tested it.

Addresses http://bugs.debian.org/659111 and
          https://bugzilla.redhat.com/789298

Reported-by: Rik Theys <Rik.Theys@esat.kuleuven.be>
Explained-by: David Flyn <davidf@rd.bbc.co.uk>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Tested-by: Rik Theys <Rik.Theys@esat.kuleuven.be>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>

ALSA: echoaudio: Remove incorrect part of assertion

commit c914f55f7cdfafe9d7d5b248751902c7ab57691e upstream.

This assertion seems to imply that chip->dsp_code_to_load is a pointer.
It's actually an integer handle on the actual firmware, and 0 has no
special meaning.

The assertion prevents initialisation of a Darla20 card, but would also
affect other models. It seems it was introduced in commit dd7b254d.

ALSA sound/pci/echoaudio/echoaudio.c:2061 Echoaudio driver starting...
ALSA sound/pci/echoaudio/echoaudio.c:1969 chip=ebe4e000
ALSA sound/pci/echoaudio/echoaudio.c:2007 pci=ed568000 irq=19 subdev=0010 Init hardware...
ALSA sound/pci/echoaudio/darla20_dsp.c:36 init_hw() - Darla20
------------[ cut here ]------------
WARNING: at sound/pci/echoaudio/echoaudio_dsp.c:478 init_hw+0x1d1/0x86c [snd_darla20]()
Hardware name: Dell DM051
BUG? (!chip->dsp_code_to_load || !chip->comm_page)

Signed-off-by: Mark Hills <mark@pogo.org.uk>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>