pinctrl: imx: Do not treat a PIN without MUX register as an error

[ Upstream commit ba562d5e54fd3136bfea0457add3675850247774 ]

Some PINs do not have a MUX register, it is not an error.
It is necessary to allow the continuation of the PINs configuration,
otherwise the whole PIN-group will be configured incorrectly.

Cc: stable@vger.kernel.org
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

arm64: mm: remove page_mapping check in __sync_icache_dcache

[ Upstream commit 20c27a4270c775d7ed661491af8ac03264d60fc6 ]

__sync_icache_dcache unconditionally skips the cache maintenance for
anonymous pages, under the assumption that flushing is only required in
the presence of D-side aliases [see 7249b79f6b4cc ("arm64: Do not flush
the D-cache for anonymous pages")].

Unfortunately, this breaks migration of anonymous pages holding
self-modifying code, where userspace cannot be reasonably expected to
reissue maintenance instructions in response to a migration.

This patch fixes the problem by removing the broken page_mapping(page)
check from the cache syncing code, otherwise we may end up fetching and
executing stale instructions from the PoU.

Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: <stable@vger.kernel.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

tracing: Handle NULL formats in hold_module_trace_bprintk_format()

[ Upstream commit 70c8217acd4383e069fe1898bbad36ea4fcdbdcc ]

If a task uses a non constant string for the format parameter in
trace_printk(), then the trace_printk_fmt variable is set to NULL. This
variable is then saved in the __trace_printk_fmt section.

The function hold_module_trace_bprintk_format() checks to see if duplicate
formats are used by modules, and reuses them if so (saves them to the list
if it is new). But this function calls lookup_format() that does a strcmp()
to the value (which is now NULL) and can cause a kernel oops.

This wasn't an issue till 3debb0a9ddb ("tracing: Fix trace_printk() to print
when not using bprintk()") which added "__used" to the trace_printk_fmt
variable, and before that, the kernel simply optimized it out (no NULL value
was saved).

The fix is simply to handle the NULL pointer in lookup_format() and have the
caller ignore the value if it was NULL.

Link: http://lkml.kernel.org/r/1464769870-18344-1-git-send-email-zhengjun.xing@intel.com
Reported-by: xingzhen <zhengjun.xing@intel.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Fixes: 3debb0a9ddb ("tracing: Fix trace_printk() to print when not using bprintk()")
Cc: stable@vger.kernel.org # v3.5+
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

can: at91_can: RX queue could get stuck at high bus load

[ Upstream commit 43200a4480cbbe660309621817f54cbb93907108 ]

At high bus load it could happen that "at91_poll()" enters with all RX
message boxes filled up. If then at the end the "quota" is exceeded as
well, "rx_next" will not be reset to the first RX mailbox and hence the
interrupts remain disabled.

Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Tested-by: Amr Bekhit <amrbekhit@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

can: c_can: Update D_CAN TX and RX functions to 32 bit - fix Altera Cyclone access

[ Upstream commit 427460c83cdf55069eee49799a0caef7dde8df69 ]

When testing CAN write floods on Altera's CycloneV, the first 2 bytes
are sometimes 0x00, 0x00 or corrupted instead of the values sent. Also
observed bytes 4 & 5 were corrupted in some cases.

The D_CAN Data registers are 32 bits and changing from 16 bit writes to
32 bit writes fixes the problem.

Testing performed on Altera CycloneV (D_CAN).  Requesting tests on other
C_CAN & D_CAN platforms.

Reported-by: Richard Andrysek <richard.andrysek@gomtec.de>
Signed-off-by: Thor Thayer <tthayer@opensource.altera.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

IB/mlx4: Properly initialize GRH TClass and FlowLabel in AHs

[ Upstream commit 8c5122e45a10a9262f872b53f151a592e870f905 ]

When this code was reworked for IBoE support the order of assignments
for the sl_tclass_flowlabel got flipped around resulting in
TClass & FlowLabel being permanently set to 0 in the packet headers.

This breaks IB routers that rely on these headers, but only affects
kernel users - libmlx4 does this properly for user space.

Cc: stable@vger.kernel.org
Fixes: fa417f7b520e ("IB/mlx4: Add support for IBoE")
Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

btrfs: account for non-CoW'd blocks in btrfs_abort_transaction

[ Upstream commit 64c12921e11b3a0c10d088606e328c58e29274d8 ]

The test for !trans->blocks_used in btrfs_abort_transaction is
insufficient to determine whether it's safe to drop the transaction
handle on the floor.  btrfs_cow_block, informed by should_cow_block,
can return blocks that have already been CoW'd in the current
transaction.  trans->blocks_used is only incremented for new block
allocations. If an operation overlaps the blocks in the current
transaction entirely and must abort the transaction, we'll happily
let it clean up the trans handle even though it may have modified
the blocks and will commit an incomplete operation.

In the long-term, I'd like to do closer tracking of when the fs
is actually modified so we can still recover as gracefully as possible,
but that approach will need some discussion.  In the short term,
since this is the only code using trans->blocks_used, let's just
switch it to a bool indicating whether any blocks were used and set
it when should_cow_block returns false.

Cc: stable@vger.kernel.org # 3.4+
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

Btrfs: make btrfs_abort_transaction consider existence of new block groups

[ Upstream commit c92f6be34c501406daf5e61f3569a1813f985393 ]

If the transaction handle doesn't have used blocks but has created new block
groups make sure we turn the fs into readonly mode too. This is because the
new block groups didn't get all their metadata persisted into the chunk and
device trees, and therefore if a subsequent transaction starts, allocates
space from the new block groups, writes data or metadata into that space,
commits successfully and then after we unmount and mount the filesystem
again, the same space can be allocated again for a new block group,
resulting in file data or metadata corruption.

Example where we don't abort the transaction when we fail to finish the
chunk allocation (add items to the chunk and device trees) and later a
future transaction where the block group is removed fails because it can't
find the chunk item in the chunk tree:

[25230.404300] WARNING: CPU: 0 PID: 7721 at fs/btrfs/super.c:260 __btrfs_abort_transaction+0x50/0xfc [btrfs]()
[25230.404301] BTRFS: Transaction aborted (error -28)
[25230.404302] Modules linked in: btrfs dm_flakey nls_utf8 fuse xor raid6_pq ntfs vfat msdos fat xfs crc32c_generic libcrc32c ext3 jbd ext2 dm_mod nfsd auth_rpcgss oid_registry nfs_acl nfs lockd fscache sunrpc loop psmouse i2c_piix4 i2ccore parport_pc parport processor button pcspkr serio_raw thermal_sys evdev microcode ext4 crc16 jbd2 mbcache sr_mod cdrom ata_generic sg sd_mod crc_t10dif crct10dif_generic crct10dif_common virtio_scsi floppy e1000 ata_piix libata virtio_pci virtio_ring scsi_mod virtio [last unloaded: btrfs]
[25230.404325] CPU: 0 PID: 7721 Comm: xfs_io Not tainted 3.17.0-rc5-btrfs-next-1+ #1
[25230.404326] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.7.5-0-ge51488c-20140602_164612-nilsson.home.kraxel.org 04/01/2014
[25230.404328]  0000000000000000 ffff88004581bb08 ffffffff813e7a13 ffff88004581bb50
[25230.404330]  ffff88004581bb40 ffffffff810423aa ffffffffa049386a 00000000ffffffe4
[25230.404332]  ffffffffa05214c0 000000000000240c ffff88010fc8f800 ffff88004581bba8
[25230.404334] Call Trace:
[25230.404338]  [<ffffffff813e7a13>] dump_stack+0x45/0x56
[25230.404342]  [<ffffffff810423aa>] warn_slowpath_common+0x7f/0x98
[25230.404351]  [<ffffffffa049386a>] ? __btrfs_abort_transaction+0x50/0xfc [btrfs]
[25230.404353]  [<ffffffff8104240b>] warn_slowpath_fmt+0x48/0x50
[25230.404362]  [<ffffffffa049386a>] __btrfs_abort_transaction+0x50/0xfc [btrfs]
[25230.404374]  [<ffffffffa04a8c43>] btrfs_create_pending_block_groups+0x10c/0x135 [btrfs]
[25230.404387]  [<ffffffffa04b77fd>] __btrfs_end_transaction+0x7e/0x2de [btrfs]
[25230.404398]  [<ffffffffa04b7a6d>] btrfs_end_transaction+0x10/0x12 [btrfs]
[25230.404408]  [<ffffffffa04a3d64>] btrfs_check_data_free_space+0x111/0x1f0 [btrfs]
[25230.404421]  [<ffffffffa04c53bd>] __btrfs_buffered_write+0x160/0x48d [btrfs]
[25230.404425]  [<ffffffff811a9268>] ? cap_inode_need_killpriv+0x2d/0x37
[25230.404429]  [<ffffffff810f6501>] ? get_page+0x1a/0x2b
[25230.404441]  [<ffffffffa04c7c95>] btrfs_file_write_iter+0x321/0x42f [btrfs]
[25230.404443]  [<ffffffff8110f5d9>] ? handle_mm_fault+0x7f3/0x846
[25230.404446]  [<ffffffff813e98c5>] ? mutex_unlock+0x16/0x18
[25230.404449]  [<ffffffff81138d68>] new_sync_write+0x7c/0xa0
[25230.404450]  [<ffffffff81139401>] vfs_write+0xb0/0x112
[25230.404452]  [<ffffffff81139c9d>] SyS_pwrite64+0x66/0x84
[25230.404454]  [<ffffffff813ebf52>] system_call_fastpath+0x16/0x1b
[25230.404455] ---[ end trace 5aa5684fdf47ab38 ]---
[25230.404458] BTRFS warning (device sdc): btrfs_create_pending_block_groups:9228: Aborting unused transaction(No space left).
[25288.084814] BTRFS: error (device sdc) in btrfs_free_chunk:2509: errno=-2 No such entry (Failed lookup while freeing chunk.)

Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

KEYS: potential uninitialized variable

[ Upstream commit 38327424b40bcebe2de92d07312c89360ac9229a ]

If __key_link_begin() failed then "edit" would be uninitialized.  I've
added a check to fix that.

This allows a random user to crash the kernel, though it's quite
difficult to achieve.  There are three ways it can be done as the user
would have to cause an error to occur in __key_link():

 (1) Cause the kernel to run out of memory.  In practice, this is difficult
     to achieve without ENOMEM cropping up elsewhere and aborting the
     attempt.

 (2) Revoke the destination keyring between the keyring ID being looked up
     and it being tested for revocation.  In practice, this is difficult to
     time correctly because the KEYCTL_REJECT function can only be used
     from the request-key upcall process.  Further, users can only make use
     of what's in /sbin/request-key.conf, though this does including a
     rejection debugging test - which means that the destination keyring
     has to be the caller's session keyring in practice.

 (3) Have just enough key quota available to create a key, a new session
     keyring for the upcall and a link in the session keyring, but not then
     sufficient quota to create a link in the nominated destination keyring
     so that it fails with EDQUOT.

The bug can be triggered using option (3) above using something like the
following:

echo 80 >/proc/sys/kernel/keys/root_maxbytes
keyctl request2 user debug:fred negate @t

The above sets the quota to something much lower (80) to make the bug
easier to trigger, but this is dependent on the system.  Note also that
the name of the keyring created contains a random number that may be
between 1 and 10 characters in size, so may throw the test off by
changing the amount of quota used.

Assuming the failure occurs, something like the following will be seen:

kfree_debugcheck: out of range ptr 6b6b6b6b6b6b6b68h
------------[ cut here ]------------
kernel BUG at ../mm/slab.c:2821!
...
RIP: 0010:[<ffffffff811600f9>] kfree_debugcheck+0x20/0x25
RSP: 0018:ffff8804014a7de8  EFLAGS: 00010092
RAX: 0000000000000034 RBX: 6b6b6b6b6b6b6b68 RCX: 0000000000000000
RDX: 0000000000040001 RSI: 00000000000000f6 RDI: 0000000000000300
RBP: ffff8804014a7df0 R08: 0000000000000001 R09: 0000000000000000
R10: ffff8804014a7e68 R11: 0000000000000054 R12: 0000000000000202
R13: ffffffff81318a66 R14: 0000000000000000 R15: 0000000000000001
...
Call Trace:
  kfree+0xde/0x1bc
  assoc_array_cancel_edit+0x1f/0x36
  __key_link_end+0x55/0x63
  key_reject_and_link+0x124/0x155
  keyctl_reject_key+0xb6/0xe0
  keyctl_negate_key+0x10/0x12
  SyS_keyctl+0x9f/0xe7
  do_syscall_64+0x63/0x13a
  entry_SYSCALL64_slow_path+0x25/0x25

Fixes: f70e2e06196a ('KEYS: Do preallocation for __key_link()')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

kvm: Fix irq route entries exceeding KVM_MAX_IRQ_ROUTES

[ Upstream commit caf1ff26e1aa178133df68ac3d40815fed2187d9 ]

These days, we experienced one guest crash with 8 cores and 3 disks,
with qemu error logs as bellow:

qemu-system-x86_64: /build/qemu-2.0.0/kvm-all.c:984:
kvm_irqchip_commit_routes: Assertion `ret == 0' failed.

And then we found one patch(bdf026317d) in qemu tree, which said
could fix this bug.

Execute the following script will reproduce the BUG quickly:

irq_affinity.sh
========================================================================

vda_irq_num=25
vdb_irq_num=27
while [ 1 ]
do
    for irq in {1,2,4,8,10,20,40,80}
        do
            echo $irq > /proc/irq/$vda_irq_num/smp_affinity
            echo $irq > /proc/irq/$vdb_irq_num/smp_affinity
            dd if=/dev/vda of=/dev/zero bs=4K count=100 iflag=direct
            dd if=/dev/vdb of=/dev/zero bs=4K count=100 iflag=direct
        done
done
========================================================================

The following qemu log is added in the qemu code and is displayed when
this bug reproduced:

kvm_irqchip_commit_routes: max gsi: 1008, nr_allocated_irq_routes: 1024,
irq_routes->nr: 1024, gsi_count: 1024.

That's to say when irq_routes->nr == 1024, there are 1024 routing entries,
but in the kernel code when routes->nr >= 1024, will just return -EINVAL;

The nr is the number of the routing entries which is in of
[1 ~ KVM_MAX_IRQ_ROUTES], not the index in [0 ~ KVM_MAX_IRQ_ROUTES - 1].

This patch fix the BUG above.

Cc: stable@vger.kernel.org
Signed-off-by: Xiubo Li <lixiubo@cmss.chinamobile.com>
Signed-off-by: Wei Tang <tangwei@cmss.chinamobile.com>
Signed-off-by: Zhang Zhuoyu <zhangzhuoyu@cmss.chinamobile.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

base: make module_create_drivers_dir race-free

[ Upstream commit 7e1b1fc4dabd6ec8e28baa0708866e13fa93c9b3 ]

Modules which register drivers via standard path (driver_register) in
parallel can cause a warning:
WARNING: CPU: 2 PID: 3492 at ../fs/sysfs/dir.c:31 sysfs_warn_dup+0x62/0x80
sysfs: cannot create duplicate filename '/module/saa7146/drivers'
Modules linked in: hexium_gemini(+) mxb(+) ...
...
Call Trace:
...
 [<ffffffff812e63a2>] sysfs_warn_dup+0x62/0x80
 [<ffffffff812e6487>] sysfs_create_dir_ns+0x77/0x90
 [<ffffffff8140f2c4>] kobject_add_internal+0xb4/0x340
 [<ffffffff8140f5b8>] kobject_add+0x68/0xb0
 [<ffffffff8140f631>] kobject_create_and_add+0x31/0x70
 [<ffffffff8157a703>] module_add_driver+0xc3/0xd0
 [<ffffffff8155e5d4>] bus_add_driver+0x154/0x280
 [<ffffffff815604c0>] driver_register+0x60/0xe0
 [<ffffffff8145bed0>] __pci_register_driver+0x60/0x70
 [<ffffffffa0273e14>] saa7146_register_extension+0x64/0x90 [saa7146]
 [<ffffffffa0033011>] hexium_init_module+0x11/0x1000 [hexium_gemini]
...

As can be (mostly) seen, driver_register causes this call sequence:
  -> bus_add_driver
    -> module_add_driver
      -> module_create_drivers_dir
The last one creates "drivers" directory in /sys/module/<...>. When
this is done in parallel, the directory is attempted to be created
twice at the same time.

This can be easily reproduced by loading mxb and hexium_gemini in
parallel:
while :; do
  modprobe mxb &
  modprobe hexium_gemini
  wait
  rmmod mxb hexium_gemini saa7146_vv saa7146
done

saa7146 calls pci_register_driver for both mxb and hexium_gemini,
which means /sys/module/saa7146/drivers is to be created for both of
them.

Fix this by a new mutex in module_create_drivers_dir which makes the
test-and-create "drivers" dir atomic.

I inverted the condition and removed 'return' to avoid multiple
unlocks or a goto.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Fixes: fe480a2675ed (Modules: only add drivers/ direcory if needed)
Cc: v2.6.21+ <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

nfsd4/rpc: move backchannel create logic into rpc code

[ Upstream commit d50039ea5ee63c589b0434baa5ecf6e5075bb6f9 ]

Also simplify the logic a bit.

Cc: stable@vger.kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Acked-by: Trond Myklebust <trondmy@primarydata.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

drm/i915/ilk: Don't disable SSC source if it's in use

[ Upstream commit 476490a945e1f0f6bd58e303058d2d8ca93a974c ]

Thanks to Ville Syrjälä for pointing me towards the cause of this issue.

Unfortunately one of the sideaffects of having the refclk for a DPLL set
to SSC is that as long as it's set to SSC, the GPU will prevent us from
powering down any of the pipes or transcoders using it. A couple of
BIOSes enable SSC in both PCH_DREF_CONTROL and in the DPLL
configurations. This causes issues on the first modeset, since we don't
expect SSC to be left on and as a result, can't successfully power down
the pipes or the transcoders using it. Here's an example from this Dell
OptiPlex 990:

[drm:intel_modeset_init] SSC enabled by BIOS, overriding VBT which says disabled
[drm:intel_modeset_init] 2 display pipes available.
[drm:intel_update_cdclk] Current CD clock rate: 400000 kHz
[drm:intel_update_max_cdclk] Max CD clock rate: 400000 kHz
[drm:intel_update_max_cdclk] Max dotclock rate: 360000 kHz
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[drm:intel_crt_reset] crt adpa set to 0xf40000
[drm:intel_dp_init_connector] Adding DP connector on port C
[drm:intel_dp_aux_init] registering DPDDC-C bus for card0-DP-1
[drm:ironlake_init_pch_refclk] has_panel 0 has_lvds 0 has_ck505 0
[drm:ironlake_init_pch_refclk] Disabling SSC entirely
… later we try committing the first modeset …
[drm:intel_dump_pipe_config] [CRTC:26][modeset] config ffff88041b02e800 for pipe A
[drm:intel_dump_pipe_config] cpu_transcoder: A
…
[drm:intel_dump_pipe_config] dpll_hw_state: dpll: 0xc4016001, dpll_md: 0x0, fp0: 0x20e08, fp1: 0x30d07
[drm:intel_dump_pipe_config] planes on this crtc
[drm:intel_dump_pipe_config] STANDARD PLANE:23 plane: 0.0 idx: 0 enabled
[drm:intel_dump_pipe_config]     FB:42, fb = 800x600 format = 0x34325258
[drm:intel_dump_pipe_config]     scaler:0 src (0, 0) 800x600 dst (0, 0) 800x600
[drm:intel_dump_pipe_config] CURSOR PLANE:25 plane: 0.1 idx: 1 disabled, scaler_id = 0
[drm:intel_dump_pipe_config] STANDARD PLANE:27 plane: 0.1 idx: 2 disabled, scaler_id = 0
[drm:intel_get_shared_dpll] CRTC:26 allocated PCH DPLL A
[drm:intel_get_shared_dpll] using PCH DPLL A for pipe A
[drm:ilk_audio_codec_disable] Disable audio codec on port C, pipe A
[drm:intel_disable_pipe] disabling pipe A
------------[ cut here ]------------
WARNING: CPU: 1 PID: 130 at drivers/gpu/drm/i915/intel_display.c:1146 intel_disable_pipe+0x297/0x2d0 [i915]
pipe_off wait timed out
…
---[ end trace 94fc8aa03ae139e8 ]---
[drm:intel_dp_link_down]
[drm:ironlake_crtc_disable [i915]] *ERROR* failed to disable transcoder A

Later modesets succeed since they reset the DPLL's configuration anyway,
but this is enough to get stuck with a big fat warning in dmesg.

A better solution would be to add refcounts for the SSC source, but for
now leaving the source clock on should suffice.

Changes since v4:
 - Fix calculation of final for systems with LVDS panels (fixes BUG() on
   CI test suite)
Changes since v3:
 - Move temp variable into loop
 - Move checks for using_ssc_source to after we've figured out has_ck505
 - Add using_ssc_source to debug output
Changes since v2:
 - Fix debug output for when we disable the CPU source
Changes since v1:
 - Leave the SSC source clock on instead of just shutting it off on all
   of the DPLL configurations.

Cc: stable@vger.kernel.org
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Lyude <cpaul@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1465916649-10228-1-git-send-email-cpaul@redhat.com
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

kernel/sysrq, watchdog, sched/core: Reset watchdog on all CPUs while processing sysrq-w

[ Upstream commit 57675cb976eff977aefb428e68e4e0236d48a9ff ]

Lengthy output of sysrq-w may take a lot of time on slow serial console.

Currently we reset NMI-watchdog on the current CPU to avoid spurious
lockup messages. Sometimes this doesn't work since softlockup watchdog
might trigger on another CPU which is waiting for an IPI to proceed.
We reset softlockup watchdogs on all CPUs, but we do this only after
listing all tasks, and this may be too late on a busy system.

So, reset watchdogs CPUs earlier, in for_each_process_thread() loop.

Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/1465474805-14641-1-git-send-email-aryabinin@virtuozzo.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

kprobes/x86: Clear TF bit in fault on single-stepping

[ Upstream commit dcfc47248d3f7d28df6f531e6426b933de94370d ]

Fix kprobe_fault_handler() to clear the TF (trap flag) bit of
the flags register in the case of a fault fixup on single-stepping.

If we put a kprobe on the instruction which caused a
page fault (e.g. actual mov instructions in copy_user_*),
that fault happens on the single-stepping buffer. In this
case, kprobes resets running instance so that the CPU can
retry execution on the original ip address.

However, current code forgets to reset the TF bit. Since this
fault happens with TF bit set for enabling single-stepping,
when it retries, it causes a debug exception and kprobes
can not handle it because it already reset itself.

On the most of x86-64 platform, it can be easily reproduced
by using kprobe tracer. E.g.

  # cd /sys/kernel/debug/tracing
  # echo p copy_user_enhanced_fast_string+5 > kprobe_events
  # echo 1 > events/kprobes/enable

And you'll see a kernel panic on do_debug(), since the debug
trap is not handled by kprobes.

To fix this problem, we just need to clear the TF bit when
resetting running kprobe.

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Reviewed-by: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: systemtap@sourceware.org
Cc: stable@vger.kernel.org # All the way back to ancient kernels
Link: http://lkml.kernel.org/r/20160611140648.25885.37482.stgit@devbox
[ Updated the comments. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

spi: sunxi: fix transfer timeout

[ Upstream commit 719bd6542044efd9b338a53dba1bef45f40ca169 ]

The trasfer timeout is fixed at 1000 ms. Reading a 4Mbyte flash over
1MHz SPI bus takes way longer than that. Calculate the timeout from the
actual time the transfer is supposed to take and multiply by 2 for good
measure.

Signed-off-by: Michal Suchanek <hramrach@gmail.com>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

spi: sun4i: allow transfers to set transmission speed

[ Upstream commit 47284e3e0f3c427c93f8583549b6c938e8a18015 ]

Allow transfers to set the transmission speed rather than using the
device max_speed_hz value. The SPI core makes sure that the speed_hz
value is always set on the transfer.

Signed-off-by: Marcus Weseloh <mweseloh42@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

spi: sun4i: fix FIFO limit

[ Upstream commit 6d9fe44bd73d567d04d3a68a2d2fa521ab9532f2 ]

When testing SPI without DMA I noticed that filling the FIFO on the
spi controller causes timeout.

Always leave room for one byte in the FIFO.

Signed-off-by: Michal Suchanek <hramrach@gmail.com>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

MIPS: KVM: Fix modular KVM under QEMU

[ Upstream commit 797179bc4fe06c89e47a9f36f886f68640b423f8 ]

Copy __kvm_mips_vcpu_run() into unmapped memory, so that we can never
get a TLB refill exception in it when KVM is built as a module.

This was observed to happen with the host MIPS kernel running under
QEMU, due to a not entirely transparent optimisation in the QEMU TLB
handling where TLB entries replaced with TLBWR are copied to a separate
part of the TLB array. Code in those pages continue to be executable,
but those mappings persist only until the next ASID switch, even if they
are marked global.

An ASID switch happens in __kvm_mips_vcpu_run() at exception level after
switching to the guest exception base. Subsequent TLB mapped kernel
instructions just prior to switching to the guest trigger a TLB refill
exception, which enters the guest exception handlers without updating
EPC. This appears as a guest triggered TLB refill on a host kernel
mapped (host KSeg2) address, which is not handled correctly as user
(guest) mode accesses to kernel (host) segments always generate address
error exceptions.

Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: kvm@vger.kernel.org
Cc: linux-mips@linux-mips.org
Cc: <stable@vger.kernel.org> # 3.10.x-
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

usb: common: otg-fsm: add license to usb-otg-fsm

[ Upstream commit ea1d39a31d3b1b6060b6e83e5a29c069a124c68a ]

Fix warning about tainted kernel because usb-otg-fsm has no license.
WARNING: with this patch usb-otg-fsm module can be loaded
but then the kernel will hang. Tested with a udoo quad board.

Cc: <stable@vger.kernel.org> #v4.1+
Signed-off-by: Oscar <oscar@naiandei.net>
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

drm/radeon: fix asic initialization for virtualized environments

[ Upstream commit 05082b8bbd1a0ffc74235449c4b8930a8c240f85 ]

When executing in a PCI passthrough based virtuzliation environment, the
hypervisor will usually attempt to send a PCIe bus reset signal to the
ASIC when the VM reboots. In this scenario, the card is not correctly
initialized, but we still consider it to be posted. Therefore, in a
passthrough based environemnt we should always post the card to guarantee
it is in a good state for driver initialization.

Ported from amdgpu commit:
amdgpu: fix asic initialization for virtualized environments

Cc: Andres Rodriguez <andres.rodriguez@amd.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

crypto: ux500 - memmove the right size

[ Upstream commit 19ced623db2fe91604d69f7d86b03144c5107739 ]

The hash buffer is really HASH_BLOCK_SIZE bytes, someone
must have thought that memmove takes n*u32 words by mistake.
Tests work as good/bad as before after this patch.

Cc: Joakim Bech <joakim.bech@linaro.org>
Cc: stable@vger.kernel.org
Reported-by: David Binderman <linuxdev.baldrick@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

ARM: 8579/1: mm: Fix definition of pmd_mknotpresent

[ Upstream commit 56530f5d2ddc9b9fade7ef8db9cb886e9dc689b5 ]

Currently pmd_mknotpresent will use a zero entry to respresent an
invalidated pmd.

Unfortunately this definition clashes with pmd_none, thus it is
possible for a race condition to occur if zap_pmd_range sees pmd_none
whilst __split_huge_pmd_locked is running too with pmdp_invalidate
just called.

This patch fixes the race condition by modifying pmd_mknotpresent to
create non-zero faulting entries (as is done in other architectures),
removing the ambiguity with pmd_none.

[catalin.marinas@arm.com: using L_PMD_SECT_VALID instead of PMD_TYPE_SECT]

Fixes: 8d9625070073 ("ARM: mm: Transparent huge page support for LPAE systems.")
Cc: <stable@vger.kernel.org> # 3.11+
Reported-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Cc: Russell King <linux@armlinux.org.uk>
Signed-off-by: Steve Capper <steve.capper@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

ARM: 8578/1: mm: ensure pmd_present only checks the valid bit

[ Upstream commit 624531886987f0f1b5d01fb598034d039198e090 ]

In a subsequent patch, pmd_mknotpresent will clear the valid bit of the
pmd entry, resulting in a not-present entry from the hardware's
perspective. Unfortunately, pmd_present simply checks for a non-zero pmd
value and will therefore continue to return true even after a
pmd_mknotpresent operation. Since pmd_mknotpresent is only used for
managing huge entries, this is only an issue for the 3-level case.

This patch fixes the 3-level pmd_present implementation to take into
account the valid bit. For bisectability, the change is made before the
fix to pmd_mknotpresent.

[catalin.marinas@arm.com: comment update regarding pmd_mknotpresent patch]

Fixes: 8d9625070073 ("ARM: mm: Transparent huge page support for LPAE systems.")
Cc: <stable@vger.kernel.org> # 3.11+
Cc: Russell King <linux@armlinux.org.uk>
Cc: Steve Capper <Steve.Capper@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

scsi: fix race between simultaneous decrements of ->host_failed

[ Upstream commit 72d8c36ec364c82bf1bf0c64dfa1041cfaf139f7 ]

sas_ata_strategy_handler() adds the works of the ata error handler to
system_unbound_wq. This workqueue asynchronously runs work items, so the
ata error handler will be performed concurrently on different CPUs. In
this case, ->host_failed will be decreased simultaneously in
scsi_eh_finish_cmd() on different CPUs, and become abnormal.

It will lead to permanently inequality between ->host_failed and
->host_busy, and scsi error handler thread won't start running. IO
errors after that won't be handled.

Since all scmds must have been handled in the strategy handler, just
remove the decrement in scsi_eh_finish_cmd() and zero ->host_busy after
the strategy handler to fix this race.

Fixes: 50824d6c5657 ("[SCSI] libsas: async ata-eh")
Cc: stable@vger.kernel.org
Signed-off-by: Wei Fang <fangwei1@huawei.com>
Reviewed-by: James Bottomley <jejb@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

usb: host: ehci-tegra: Grab the correct UTMI pads reset

[ Upstream commit f8a15a9650694feaa0dabf197b0c94d37cd3fb42 ]

There are three EHCI controllers on Tegra SoCs, each with its own reset
line. However, the first controller contains a set of UTMI configuration
registers that are shared with its siblings. These registers will only
be reset as part of the first controller's reset. For proper operation
it must be ensured that the UTMI configuration registers are reset
before any of the EHCI controllers are enabled, irrespective of the
probe order.

Commit a47cc24cd1e5 ("USB: EHCI: tegra: Fix probe order issue leading to
broken USB") introduced code that ensures the first controller is always
reset before setting up any of the controllers, and is never again reset
afterwards.

This code, however, grabs the wrong reset. Each EHCI controller has two
reset controls attached: 1) the USB controller reset and 2) the UTMI
pads reset (really the first controller's reset). In order to reset the
UTMI pads registers the code must grab the second reset, but instead it
grabbing the first.

Fixes: a47cc24cd1e5 ("USB: EHCI: tegra: Fix probe order issue leading to broken USB")
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Cc: stable@vger.kernel.org
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

usb: musb: Stop bulk endpoint while queue is rotated

[ Upstream commit 7b2c17f829545df27a910e8d82e133c21c9a8c9c ]

Ensure that the endpoint is stopped by clearing REQPKT before
clearing DATAERR_NAKTIMEOUT before rotating the queue on the
dedicated bulk endpoint.
This addresses an issue where a race could result in the endpoint
receiving data before it was reprogrammed resulting in a warning
about such data from musb_rx_reinit before it was thrown away.
The data thrown away was a valid packet that had been correctly
ACKed which meant the host and device got out of sync.

Signed-off-by: Andrew Goodbody <andrew.goodbody@cambrionix.com>
Cc: stable@vger.kernel.org
Signed-off-by: Bin Liu <b-liu@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

usb: musb: Ensure rx reinit occurs for shared_fifo endpoints

[ Upstream commit f3eec0cf784e0d6c47822ca6b66df3d5812af7e6 ]

shared_fifo endpoints would only get a previous tx state cleared
out, the rx state was only cleared for non shared_fifo endpoints
Change this so that the rx state is cleared for all endpoints.
This addresses an issue that resulted in rx packets being dropped
silently.

Signed-off-by: Andrew Goodbody <andrew.goodbody@cambrionix.com>
Cc: stable@vger.kernel.org
Signed-off-by: Bin Liu <b-liu@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

USB: xhci: Add broken streams quirk for Frescologic device id 1009

[ Upstream commit d95815ba6a0f287213118c136e64d8c56daeaeab ]

I got one of these cards for testing uas with, it seems that with streams
it dma-s all over the place, corrupting memory. On my first tests it
managed to dma over the BIOS of the motherboard somehow and completely
bricked it.

Tests on another motherboard show that it does work with streams disabled.

Cc: stable@vger.kernel.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

usb: quirks: Add no-lpm quirk for Acer C120 LED Projector

[ Upstream commit 32cb0b37098f4beeff5ad9e325f11b42a6ede56c ]

The Acer C120 LED Projector is a USB-3 connected pico projector which
takes both its power and video data from USB-3.

In combination with some hubs this device does not play well with
lpm, so disable lpm for it.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

usb: quirks: Fix sorting

[ Upstream commit 81099f97bd31e25ff2719a435b1860fc3876122f ]

Properly sort all the entries by vendor id.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

usb: xhci-plat: properly handle probe deferral for devm_clk_get()

[ Upstream commit de95c40d5beaa47f6dc8fe9ac4159b4672b51523 ]

On some platforms, the clocks might be registered by a platform
driver. When this is the case, the clock platform driver may very well
be probed after xhci-plat, in which case the first probe() invocation
of xhci-plat will receive -EPROBE_DEFER as the return value of
devm_clk_get().

The current code handles that as a normal error, and simply assumes
that this means that the system doesn't have a clock for the XHCI
controller, and continues probing without calling
clk_prepare_enable(). Unfortunately, this doesn't work on systems
where the XHCI controller does have a clock, but that clock is
provided by another platform driver. In order to fix this situation,
we handle the -EPROBE_DEFER error condition specially, and abort the
XHCI controller probe(). It will be retried later automatically, the
clock will be available, devm_clk_get() will succeed, and the probe()
will continue with the clock prepared and enabled as expected.

In practice, such issue is seen on the ARM64 Marvell 7K/8K platform,
where the clocks are registered by a platform driver.

Cc: <stable@vger.kernel.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

xhci: Fix handling timeouted commands on hosts in weird states.

[ Upstream commit 3425aa03f484d45dc21e0e791c2f6c74ea656421 ]

If commands timeout we mark them for abortion, then stop the command
ring, and turn the commands to no-ops and finally restart the command
ring.

If the host is working properly the no-op commands will finish and
pending completions are called.
If we notice the host is failing, driver clears the command ring and
completes, deletes and frees all pending commands.

There are two separate cases reported where host is believed to work
properly but is not. In the first case we successfully stop the ring
but no abort or stop command ring event is ever sent and host locks up.

The second case is if a host is removed, command times out and driver
believes the ring is stopped, and assumes it will be restarted, but
actually ends up timing out on the same command forever.
If one of the pending commands has the xhci->mutex held it will block
xhci_stop() in the remove codepath which otherwise would cleanup pending
commands.

Add a check that clears all pending commands in case host is removed,
or we are stuck timing out on the same command. Also restart the
command timeout timer when stopping the command ring to ensure we
recive an ring stop/abort event.

Cc: stable <stable@vger.kernel.org>
Tested-by: Joe Lawrence <joe.lawrence@stratus.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

HID: elo: kill not flush the work

[ Upstream commit ed596a4a88bd161f868ccba078557ee7ede8a6ef ]

Flushing a work that reschedules itself is not a sensible operation. It needs
to be killed. Failure to do so leads to a kernel panic in the timer code.

CC: stable@vger.kernel.org
Signed-off-by: Oliver Neukum <ONeukum@suse.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

usb: gadget: fix spinlock dead lock in gadgetfs

[ Upstream commit d246dcb2331c5783743720e6510892eb1d2801d9 ]

[   40.467381] =============================================
[   40.473013] [ INFO: possible recursive locking detected ]
[   40.478651] 4.6.0-08691-g7f3db9a #37 Not tainted
[   40.483466] ---------------------------------------------
[   40.489098] usb/733 is trying to acquire lock:
[   40.493734]  (&(&dev->lock)->rlock){-.....}, at: [<bf129288>] ep0_complete+0x18/0xdc [gadgetfs]
[   40.502882]
[   40.502882] but task is already holding lock:
[   40.508967]  (&(&dev->lock)->rlock){-.....}, at: [<bf12a420>] ep0_read+0x20/0x5e0 [gadgetfs]
[   40.517811]
[   40.517811] other info that might help us debug this:
[   40.524623]  Possible unsafe locking scenario:
[   40.524623]
[   40.530798]        CPU0
[   40.533346]        ----
[   40.535894]   lock(&(&dev->lock)->rlock);
[   40.540088]   lock(&(&dev->lock)->rlock);
[   40.544284]
[   40.544284]  *** DEADLOCK ***
[   40.544284]
[   40.550461]  May be due to missing lock nesting notation
[   40.550461]
[   40.557544] 2 locks held by usb/733:
[   40.561271]  #0:  (&f->f_pos_lock){+.+.+.}, at: [<c02a6114>] __fdget_pos+0x40/0x48
[   40.569219]  #1:  (&(&dev->lock)->rlock){-.....}, at: [<bf12a420>] ep0_read+0x20/0x5e0 [gadgetfs]
[   40.578523]
[   40.578523] stack backtrace:
[   40.583075] CPU: 0 PID: 733 Comm: usb Not tainted 4.6.0-08691-g7f3db9a #37
[   40.590246] Hardware name: Generic AM33XX (Flattened Device Tree)
[   40.596625] [<c010ffbc>] (unwind_backtrace) from [<c010c1bc>] (show_stack+0x10/0x14)
[   40.604718] [<c010c1bc>] (show_stack) from [<c04207fc>] (dump_stack+0xb0/0xe4)
[   40.612267] [<c04207fc>] (dump_stack) from [<c01886ec>] (__lock_acquire+0xf68/0x1994)
[   40.620440] [<c01886ec>] (__lock_acquire) from [<c0189528>] (lock_acquire+0xd8/0x238)
[   40.628621] [<c0189528>] (lock_acquire) from [<c06ad6b4>] (_raw_spin_lock_irqsave+0x38/0x4c)
[   40.637440] [<c06ad6b4>] (_raw_spin_lock_irqsave) from [<bf129288>] (ep0_complete+0x18/0xdc [gadgetfs])
[   40.647339] [<bf129288>] (ep0_complete [gadgetfs]) from [<bf10a728>] (musb_g_giveback+0x118/0x1b0 [musb_hdrc])
[   40.657842] [<bf10a728>] (musb_g_giveback [musb_hdrc]) from [<bf108768>] (musb_g_ep0_queue+0x16c/0x188 [musb_hdrc])
[   40.668772] [<bf108768>] (musb_g_ep0_queue [musb_hdrc]) from [<bf12a944>] (ep0_read+0x544/0x5e0 [gadgetfs])
[   40.678963] [<bf12a944>] (ep0_read [gadgetfs]) from [<c0284470>] (__vfs_read+0x20/0x110)
[   40.687414] [<c0284470>] (__vfs_read) from [<c0285324>] (vfs_read+0x88/0x114)
[   40.694864] [<c0285324>] (vfs_read) from [<c0286150>] (SyS_read+0x44/0x9c)
[   40.702051] [<c0286150>] (SyS_read) from [<c0107820>] (ret_fast_syscall+0x0/0x1c)

This is caused by the spinlock bug in ep0_read().
Fix the two other deadlock sources in gadgetfs_setup() too.

Cc: <stable@vger.kernel.org> # v3.16+
Signed-off-by: Bin Liu <b-liu@ti.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

usb: dwc3: exynos: Fix deferred probing storm.

[ Upstream commit 4879efb34f7d49235fac334d76d9c6a77a021413 ]

dwc3-exynos has two problems during init if the regulators are slow
to come up (for instance if the I2C bus driver is not on the initramfs)
and return probe deferral. First, every time this happens, the driver
leaks the USB phys created; they need to be deallocated on error.

Second, since the phy devices are created before the regulators fail,
this means that there's a new device to re-trigger deferred probing,
which causes it to essentially go into a busy loop of re-probing the
device until the regulators come up.

Move the phy creation to after the regulators have succeeded, and also
fix cleanup on failure. On my ODROID XU4 system (with Debian's initramfs
which doesn't contain the I2C driver), this reduces the number of probe
attempts (for each of the two controllers) from more than 2000 to eight.

Signed-off-by: Steinar H. Gunderson <sesse@google.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Vivek Gautam <gautam.vivek@samsung.com>
Fixes: d720f057fda4 ("usb: dwc3: exynos: add nop transceiver support")
Cc: <stable@vger.kernel.org>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

usb: dwc3: exynos: Remove local variable for clock from probe

[ Upstream commit c1a3acaadde7eb260f4fd4ec87cb87d3ffeed979 ]

There's no need to keep one local variable for clock, and
then assign the same to 'clk' member of dwc3_exynos.
Just cleaning it up.

Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

cgroup: remove redundant cleanup in css_create

[ Upstream commit b00c52dae6d9ee8d0f2407118ef6544ae5524781 ]

When create css failed, before call css_free_rcu_fn, we remove the css
id and exit the percpu_ref, but we will do these again in
css_free_work_fn, so they are redundant.  Especially the css id, that
would cause problem if we remove it twice, since it may be assigned to
another css after the first remove.

tj: This was broken by two commits updating the free path without
    synchronizing the creation failure path.  This can be easily
    triggered by trying to create more than 64k memory cgroups.

Signed-off-by: Wenwei Tao <ww.tao0320@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Vladimir Davydov <vdavydov@parallels.com>
Fixes: 9a1049da9bd2 ("percpu-refcount: require percpu_ref to be exited explicitly")
Fixes: 01e586598b22 ("cgroup: release css->id after css_free")
Cc: stable@vger.kernel.org # v3.17+
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

percpu: fix synchronization between synchronous map extension and chunk destruction

[ Upstream commit 6710e594f71ccaad8101bc64321152af7cd9ea28 ]

For non-atomic allocations, pcpu_alloc() can try to extend the area
map synchronously after dropping pcpu_lock; however, the extension
wasn't synchronized against chunk destruction and the chunk might get
freed while extension is in progress.

This patch fixes the bug by putting most of non-atomic allocations
under pcpu_alloc_mutex to synchronize against pcpu_balance_work which
is responsible for async chunk management including destruction.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-and-tested-by: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Reported-by: Vlastimil Babka <vbabka@suse.cz>
Reported-by: Sasha Levin <sasha.levin@oracle.com>
Cc: stable@vger.kernel.org # v3.18+
Fixes: 1a4d76076cda ("percpu: implement asynchronous chunk population")
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

percpu: fix synchronization between chunk->map_extend_work and chunk destruction

[ Upstream commit 4f996e234dad488e5d9ba0858bc1bae12eff82c3 ]

Atomic allocations can trigger async map extensions which is serviced
by chunk->map_extend_work.  pcpu_balance_work which is responsible for
destroying idle chunks wasn't synchronizing properly against
chunk->map_extend_work and may end up freeing the chunk while the work
item is still in flight.

This patch fixes the bug by rolling async map extension operations
into pcpu_balance_work.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-and-tested-by: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Reported-by: Vlastimil Babka <vbabka@suse.cz>
Reported-by: Sasha Levin <sasha.levin@oracle.com>
Cc: stable@vger.kernel.org # v3.18+
Fixes: 9c824b6a172c ("percpu: make sure chunk->map array has available space")
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

af_unix: Fix splice-bind deadlock

[ Upstream commit c845acb324aa85a39650a14e7696982ceea75dc1 ]

On 2015/11/06, Dmitry Vyukov reported a deadlock involving the splice
system call and AF_UNIX sockets,

http://lists.openwall.net/netdev/2015/11/06/24

The situation was analyzed as

(a while ago) A: socketpair()
B: splice() from a pipe to /mnt/regular_file
does sb_start_write() on /mnt
C: try to freeze /mnt
wait for B to finish with /mnt
A: bind() try to bind our socket to /mnt/new_socket_name
lock our socket, see it not bound yet
decide that it needs to create something in /mnt
try to do sb_start_write() on /mnt, block (it's
waiting for C).
D: splice() from the same pipe to our socket
lock the pipe, see that socket is connected
try to lock the socket, block waiting for A
B: get around to actually feeding a chunk from
pipe to file, try to lock the pipe.  Deadlock.

on 2015/11/10 by Al Viro,

http://lists.openwall.net/netdev/2015/11/10/4

The patch fixes this by removing the kern_path_create related code from
unix_mknod and executing it as part of unix_bind prior acquiring the
readlock of the socket in question. This means that A (as used above)
will sb_start_write on /mnt before it acquires the readlock, hence, it
won't indirectly block B which first did a sb_start_write and then
waited for a thread trying to acquire the readlock. Consequently, A
being blocked by C waiting for B won't cause a deadlock anymore
(effectively, both A and B acquire two locks in opposite order in the
situation described above).

Dmitry Vyukov(<dvyukov@google.com>) tested the original patch.

Signed-off-by: Rainer Weikusat <rweikusat@mobileactivedefense.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

VFS: AF_UNIX sockets should call mknod on the top layer only

[ Upstream commit ee8ac4d61c2cf43bdd427e70db97ac330e61570d ]

AF_UNIX sockets should call mknod on the top layer only and should not attempt
to modify the lower layer in a layered filesystem such as overlayfs.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

VFS: net/unix: d_backing_inode() annotations

[ Upstream commit a25b376bded1ba7fd1d455e140d723b7de2e343c ]

places where we are dealing with S_ISSOCK file creation/lookups.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

Linux 3.18.36

Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

ecryptfs: forbid opening files without mmap handler

[ Upstream commit 2f36db71009304b3f0b95afacd8eba1f9f046b87 ]

This prevents users from triggering a stack overflow through a recursive
invocation of pagefault handling that involves mapping procfs files into
virtual memory.

Signed-off-by: Jann Horn <jannh@google.com>
Acked-by: Tyler Hicks <tyhicks@canonical.com>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

proc: prevent stacking filesystems on top

[ Upstream commit e54ad7f1ee263ffa5a2de9c609d58dfa27b21cd9 ]

This prevents stacking filesystems (ecryptfs and overlayfs) from using
procfs as lower filesystem.  There is too much magic going on inside
procfs, and there is no good reason to stack stuff on top of procfs.

(For example, procfs does access checks in VFS open handlers, and
ecryptfs by design calls open handlers from a kernel thread that doesn't
drop privileges or so.)

Signed-off-by: Jann Horn <jannh@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

wext: Fix 32 bit iwpriv compatibility issue with 64 bit Kernel

[ Upstream commit 3d5fdff46c4b2b9534fa2f9fc78e90a48e0ff724 ]

iwpriv app uses iw_point structure to send data to Kernel. The iw_point
structure holds a pointer. For compatibility Kernel converts the pointer
as required for WEXT IOCTLs (SIOCIWFIRST to SIOCIWLAST). Some drivers
may use iw_handler_def.private_args to populate iwpriv commands instead
of iw_handler_def.private. For those case, the IOCTLs from
SIOCIWFIRSTPRIV to SIOCIWLASTPRIV will follow the path ndo_do_ioctl().
Accordingly when the filled up iw_point structure comes from 32 bit
iwpriv to 64 bit Kernel, Kernel will not convert the pointer and sends
it to driver. So, the driver may get the invalid data.

The pointer conversion for the IOCTLs (SIOCIWFIRSTPRIV to
SIOCIWLASTPRIV), which follow the path ndo_do_ioctl(), is mandatory.
This patch adds pointer conversion from 32 bit to 64 bit and vice versa,
if the ioctl comes from 32 bit iwpriv to 64 bit Kernel.

Cc: stable@vger.kernel.org
Signed-off-by: Prasun Maiti <prasunmaiti87@gmail.com>
Signed-off-by: Ujjal Roy <royujjal@gmail.com>
Tested-by: Dibyajyoti Ghosh <dibyajyotig@gmail.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

gpio: bcm-kona: fix bcm_kona_gpio_reset() warnings

[ Upstream commit b66b2a0adf0e48973b582e055758b9907a7eee7c ]

The bcm_kona_gpio_reset() calls bcm_kona_gpio_write_lock_regs()
with what looks like the wrong parameter. The write_lock_regs
function takes a pointer to the registers, not the bcm_kona_gpio
structure.

Fix the warning, and probably bug by changing the function to
pass reg_base instead of kona_gpio, fixing the following warning:

drivers/gpio/gpio-bcm-kona.c:550:47: warning: incorrect type in argument 1
  (different address spaces)
  expected void [noderef] <asn:2>*reg_base
  got struct bcm_kona_gpio *kona_gpio
  warning: incorrect type in argument 1 (different address spaces)
  expected void [noderef] <asn:2>*reg_base
  got struct bcm_kona_gpio *kona_gpio

Cc: stable@vger.kernel.org
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Acked-by: Ray Jui <ray.jui@broadcom.com>
Reviewed-by: Markus Mayer <mmayer@broadcom.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

gpiolib: Fix NULL pointer deference

[ Upstream commit 11f33a6d15bfa397867ac0d7f3481b6dd683286f ]

Under some circumstances, a gpiochip might be half cleaned from the
gpio_device list.

This patch makes sure that the chip pointer is still valid, before
calling the match function.

[  104.088296] BUG: unable to handle kernel NULL pointer dereference at
0000000000000090
[  104.089772] IP: [<ffffffff813d2045>] of_gpiochip_find_and_xlate+0x15/0x80
[  104.128273] Call Trace:
[  104.129802]  [<ffffffff813d2030>] ? of_parse_own_gpio+0x1f0/0x1f0
[  104.131353]  [<ffffffff813cd910>] gpiochip_find+0x60/0x90
[  104.132868]  [<ffffffff813d21ba>] of_get_named_gpiod_flags+0x9a/0x120
...
[  104.141586]  [<ffffffff8163d12b>] gpio_led_probe+0x11b/0x360

Cc: stable@vger.kernel.org
Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

fix d_walk()/non-delayed __d_free() race

[ Upstream commit 3d56c25e3bb0726a5c5e16fc2d9e38f8ed763085 ]

Ascend-to-parent logics in d_walk() depends on all encountered child
dentries not getting freed without an RCU delay.  Unfortunately, in
quite a few cases it is not true, with hard-to-hit oopsable race as
the result.

Fortunately, the fix is simiple; right now the rule is "if it ever
been hashed, freeing must be delayed" and changing it to "if it
ever had a parent, freeing must be delayed" closes that hole and
covers all cases the old rule used to cover.  Moreover, pipes and
sockets remain _not_ covered, so we do not introduce RCU delay in
the cases which are the reason for having that delay conditional
in the first place.

Cc: stable@vger.kernel.org # v3.2+ (and watch out for __d_materialise_dentry())
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

cpufreq: intel_pstate: Fix ->set_policy() interface for no_turbo

[ Upstream commit 983e600e88835f0321d1a0ea06f52d48b7b5a544 ]

When turbo is disabled, the ->set_policy() interface is broken.

For example, when turbo is disabled and cpuinfo.max = 2900000 (full
max turbo frequency), setting the limits results in frequency less
than the requested one:
Set 1000000 KHz results in 0700000 KHz
Set 1500000 KHz results in 1100000 KHz
Set 2000000 KHz results in  1500000 KHz

This is because the limits->max_perf fraction is calculated using
the max turbo frequency as the reference, but when the max P-State is
capped in intel_pstate_get_min_max(), the reference is not the max
turbo P-State. This results in reducing max P-State.

One option is to always use max turbo as reference for calculating
limits. But this will not be correct. By definition the intel_pstate
sysfs limits, shows percentage of available performance. So when
BIOS has disabled turbo, the available performance is max non turbo.
So the max_perf_pct should still show 100%.

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
[ rjw : Subject & changelog, rewrite in fewer lines of code ]
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

of: fix autoloading due to broken modalias with no 'compatible'

[ Upstream commit b3c0a4dab7e35a9b6d69c0415641d2280fdefb2b ]

Because of an improper dereference, a stray 'C' character was output to
the modalias when no 'compatible' was specified. This is the case for
some old PowerMac drivers which only set the 'name' property. Fix it to
let them match again.

Reported-by: Mathieu Malaterre <malat@debian.org>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Tested-by: Mathieu Malaterre <malat@debian.org>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Andreas Schwab <schwab@linux-m68k.org>
Fixes: 6543becf26fff6 ("mod/file2alias: make modalias generation safe for cross compiling")
Cc: stable@vger.kernel.org # v3.9+
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

x86, build: copy ldlinux.c32 to image.iso

[ Upstream commit 9c77679cadb118c0aa99e6f88533d91765a131ba ]

For newer versions of Syslinux, we need ldlinux.c32 in addition to
isolinux.bin to reside on the boot disk, so if the latter is found,
copy it, too, to the isoimage tree.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Cc: Linux Stable Tree <stable@vger.kernel.org>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

mnt: fs_fully_visible test the proper mount for MNT_LOCKED

[ Upstream commit d71ed6c930ac7d8f88f3cef6624a7e826392d61f ]

MNT_LOCKED implies on a child mount implies the child is locked to the
parent.  So while looping through the children the children should be
tested (not their parent).

Typically an unshare of a mount namespace locks all mounts together
making both the parent and the slave as locked but there are a few
corner cases where other things work.

Cc: stable@vger.kernel.org
Fixes: ceeb0e5d39fc ("vfs: Ignore unlocked mounts in fs_fully_visible")
Reported-by: Seth Forshee <seth.forshee@canonical.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

mnt: If fs_fully_visible fails call put_filesystem.

[ Upstream commit 97c1df3e54e811aed484a036a798b4b25d002ecf ]

Add this trivial missing error handling.

Cc: stable@vger.kernel.org
Fixes: 1b852bceb0d1 ("mnt: Refactor the logic for mounting sysfs and proc in a user namespace")
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

parisc: Fix pagefault crash in unaligned __get_user() call

[ Upstream commit 8b78f260887df532da529f225c49195d18fef36b ]

One of the debian buildd servers had this crash in the syslog without
any other information:

 Unaligned handler failed, ret = -2
 clock_adjtime (pid 22578): Unaligned data reference (code 28)
 CPU: 1 PID: 22578 Comm: clock_adjtime Tainted: G  E  4.5.0-2-parisc64-smp #1 Debian 4.5.4-1
 task: 000000007d9960f8 ti: 00000001bde7c000 task.ti: 00000001bde7c000

      YZrvWESTHLNXBCVMcbcbcbcbOGFRQPDI
 PSW: 00001000000001001111100000001111 Tainted: G            E
 r00-03  000000ff0804f80f 00000001bde7c2b0 00000000402d2be8 00000001bde7c2b0
 r04-07  00000000409e1fd0 00000000fa6f7fff 00000001bde7c148 00000000fa6f7fff
 r08-11  0000000000000000 00000000ffffffff 00000000fac9bb7b 000000000002b4d4
 r12-15  000000000015241c 000000000015242c 000000000000002d 00000000fac9bb7b
 r16-19  0000000000028800 0000000000000001 0000000000000070 00000001bde7c218
 r20-23  0000000000000000 00000001bde7c210 0000000000000002 0000000000000000
 r24-27  0000000000000000 0000000000000000 00000001bde7c148 00000000409e1fd0
 r28-31  0000000000000001 00000001bde7c320 00000001bde7c350 00000001bde7c218
 sr00-03  0000000001200000 0000000001200000 0000000000000000 0000000001200000
 sr04-07  0000000000000000 0000000000000000 0000000000000000 0000000000000000

 IASQ: 0000000000000000 0000000000000000 IAOQ: 00000000402d2e84 00000000402d2e88
  IIR: 0ca0d089    ISR: 0000000001200000  IOR: 00000000fa6f7fff
  CPU:        1   CR30: 00000001bde7c000 CR31: ffffffffffffffff
  ORIG_R28: 00000002369fe628
  IAOQ[0]: compat_get_timex+0x2dc/0x3c0
  IAOQ[1]: compat_get_timex+0x2e0/0x3c0
  RP(r2): compat_get_timex+0x40/0x3c0
 Backtrace:
  [<00000000402d4608>] compat_SyS_clock_adjtime+0x40/0xc0
  [<0000000040205024>] syscall_exit+0x0/0x14

This means the userspace program clock_adjtime called the clock_adjtime()
syscall and then crashed inside the compat_get_timex() function.
Syscalls should never crash programs, but instead return EFAULT.

The IIR register contains the executed instruction, which disassebles
into "ldw 0(sr3,r5),r9".
This load-word instruction is part of __get_user() which tried to read the word
at %r5/IOR (0xfa6f7fff). This means the unaligned handler jumped in.  The
unaligned handler is able to emulate all ldw instructions, but it fails if it
fails to read the source e.g. because of page fault.

The following program reproduces the problem:

#define _GNU_SOURCE
#include <unistd.h>
#include <sys/syscall.h>
#include <sys/mman.h>

int main(void) {
        /* allocate 8k */
        char *ptr = mmap(NULL, 2*4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0);
        /* free second half (upper 4k) and make it invalid. */
        munmap(ptr+4096, 4096);
        /* syscall where first int is unaligned and clobbers into invalid memory region */
        /* syscall should return EFAULT */
        return syscall(__NR_clock_adjtime, 0, ptr+4095);
}

To fix this issue we simply need to check if the faulting instruction address
is in the exception fixup table when the unaligned handler failed. If it
is, call the fixup routine instead of crashing.

While looking at the unaligned handler I found another issue as well: The
target register should not be modified if the handler was unsuccessful.

Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

of: irq: fix of_irq_get[_byname]() kernel-doc

[ Upstream commit 3993546646baf1dab5f5c4f7d9bb58f2046fd1c1 ]

The kernel-doc for the of_irq_get[_byname]()  is clearly inadequate in
describing the return values -- of_irq_get_byname() is documented better
than of_irq_get() but it  still doesn't mention that 0 is returned iff
irq_create_of_mapping() fails (it doesn't return an error code in this
case). Document all possible return value variants, making the writing
of the word "IRQ" consistent, while at it...

Fixes: 9ec36cafe43b ("of/irq: do irq resolution in platform_get_irq")
Fixes: ad69674e73a1 ("of/irq: do irq resolution in platform_get_irq_byname()")
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
CC: stable@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

ALSA: hda - Fix headset mic detection problem for Dell machine

[ Upstream commit f90d83b301701026b2e4c437a3613f377f63290e ]

Add the pin configuration value of this machine into the pin_quirk
table to make DELL1_MIC_NO_PRESENCE apply to this machine.

Signed-off-by: AceLan Kao <acelan.kao@canonical.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

locking/ww_mutex: Report recursive ww_mutex locking early

[ Upstream commit 0422e83d84ae24b933e4b0d4c1e0f0b4ae8a0a3b ]

Recursive locking for ww_mutexes was originally conceived as an
exception. However, it is heavily used by the DRM atomic modesetting
code. Currently, the recursive deadlock is checked after we have queued
up for a busy-spin and as we never release the lock, we spin until
kicked, whereupon the deadlock is discovered and reported.

A simple solution for the now common problem is to move the recursive
deadlock discovery to the first action when taking the ww_mutex.

Suggested-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/1464293297-19777-1-git-send-email-chris@chris-wilson.co.uk
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

irqchip/gic-v3: Fix ICC_SGI1R_EL1.INTID decoding mask

[ Upstream commit dd5f1b049dc139876801db3cdd0f20d21fd428cc ]

The INTID mask is wrong, and is made a signed value, which has
nteresting effects in the KVM emulation. Let's sanitize it.

Cc: stable@vger.kernel.org
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

arm64: GICv3: introduce symbolic names for GICv3 ICC_SGI1R_EL1 fields

[ Upstream commit 7e5802781c3e109558ddfd8b02155ad24d872ee7 ]

The gic_send_sgi() function used hardcoded bit shift values to
generate the ICC_SGI1R_EL1 register value.
Replace this with symbolic names to allow reusing them later.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

KVM: x86: fix OOPS after invalid KVM_SET_DEBUGREGS

[ Upstream commit d14bdb553f9196169f003058ae1cdabe514470e6 ]

MOV to DR6 or DR7 causes a #GP if an attempt is made to write a 1 to
any of bits 63:32.  However, this is not detected at KVM_SET_DEBUGREGS
time, and the next KVM_RUN oopses:

   general protection fault: 0000 [#1] SMP
   CPU: 2 PID: 14987 Comm: a.out Not tainted 4.4.9-300.fc23.x86_64 #1
   Hardware name: LENOVO 2325F51/2325F51, BIOS G2ET32WW (1.12 ) 05/30/2012
   [...]
   Call Trace:
    [<ffffffffa072c93d>] kvm_arch_vcpu_ioctl_run+0x141d/0x14e0 [kvm]
    [<ffffffffa071405d>] kvm_vcpu_ioctl+0x33d/0x620 [kvm]
    [<ffffffff81241648>] do_vfs_ioctl+0x298/0x480
    [<ffffffff812418a9>] SyS_ioctl+0x79/0x90
    [<ffffffff817a0f2e>] entry_SYSCALL_64_fastpath+0x12/0x71
   Code: 55 83 ff 07 48 89 e5 77 27 89 ff ff 24 fd 90 87 80 81 0f 23 fe 5d c3 0f 23 c6 5d c3 0f 23 ce 5d c3 0f 23 d6 5d c3 0f 23 de 5d c3 <0f> 23 f6 5d c3 0f 0b 66 66 66 66 66 2e 0f 1f 84 00 00 00 00 00
   RIP  [<ffffffff810639eb>] native_set_debugreg+0x2b/0x40
    RSP <ffff88005836bd50>

Testcase (beautified/reduced from syzkaller output):

    #include <unistd.h>
    #include <sys/syscall.h>
    #include <string.h>
    #include <stdint.h>
    #include <linux/kvm.h>
    #include <fcntl.h>
    #include <sys/ioctl.h>

    long r[8];

    int main()
    {
        struct kvm_debugregs dr = { 0 };

        r[2] = open("/dev/kvm", O_RDONLY);
        r[3] = ioctl(r[2], KVM_CREATE_VM, 0);
        r[4] = ioctl(r[3], KVM_CREATE_VCPU, 7);

        memcpy(&dr,
               "\x5d\x6a\x6b\xe8\x57\x3b\x4b\x7e\xcf\x0d\xa1\x72"
               "\xa3\x4a\x29\x0c\xfc\x6d\x44\x00\xa7\x52\xc7\xd8"
               "\x00\xdb\x89\x9d\x78\xb5\x54\x6b\x6b\x13\x1c\xe9"
               "\x5e\xd3\x0e\x40\x6f\xb4\x66\xf7\x5b\xe3\x36\xcb",
               48);
        r[7] = ioctl(r[4], KVM_SET_DEBUGREGS, &dr);
        r[6] = ioctl(r[4], KVM_RUN, 0);
    }

Reported-by: Dmitry Vyukov <dvyukov@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

KVM: irqfd: fix NULL pointer dereference in kvm_irq_map_gsi

[ Upstream commit c622a3c21ede892e370b56e1ceb9eb28f8bbda6b ]

Found by syzkaller:

    BUG: unable to handle kernel NULL pointer dereference at 0000000000000120
    IP: [<ffffffffa0797202>] kvm_irq_map_gsi+0x12/0x90 [kvm]
    PGD 6f80b067 PUD b6535067 PMD 0
    Oops: 0000 [#1] SMP
    CPU: 3 PID: 4988 Comm: a.out Not tainted 4.4.9-300.fc23.x86_64 #1
    [...]
    Call Trace:
     [<ffffffffa0795f62>] irqfd_update+0x32/0xc0 [kvm]
     [<ffffffffa0796c7c>] kvm_irqfd+0x3dc/0x5b0 [kvm]
     [<ffffffffa07943f4>] kvm_vm_ioctl+0x164/0x6f0 [kvm]
     [<ffffffff81241648>] do_vfs_ioctl+0x298/0x480
     [<ffffffff812418a9>] SyS_ioctl+0x79/0x90
     [<ffffffff817a1062>] tracesys_phase2+0x84/0x89
    Code: b5 71 a7 e0 5b 41 5c 41 5d 5d f3 c3 66 66 66 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 55 48 8b 8f 10 2e 00 00 31 c0 48 89 e5 <39> 91 20 01 00 00 76 6a 48 63 d2 48 8b 94 d1 28 01 00 00 48 85
    RIP  [<ffffffffa0797202>] kvm_irq_map_gsi+0x12/0x90 [kvm]
     RSP <ffff8800926cbca8>
    CR2: 0000000000000120

Testcase:

    #include <unistd.h>
    #include <sys/syscall.h>
    #include <string.h>
    #include <stdint.h>
    #include <linux/kvm.h>
    #include <fcntl.h>
    #include <sys/ioctl.h>

    long r[26];

    int main()
    {
        memset(r, -1, sizeof(r));
        r[2] = open("/dev/kvm", 0);
        r[3] = ioctl(r[2], KVM_CREATE_VM, 0);

        struct kvm_irqfd ifd;
        ifd.fd = syscall(SYS_eventfd2, 5, 0);
        ifd.gsi = 3;
        ifd.flags = 2;
        ifd.resamplefd = ifd.fd;
        r[25] = ioctl(r[3], KVM_IRQFD, &ifd);
        return 0;
    }

Reported-by: Dmitry Vyukov <dvyukov@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

ARM: fix PTRACE_SETVFPREGS on SMP systems

[ Upstream commit e2dfb4b880146bfd4b6aa8e138c0205407cebbaf ]

PTRACE_SETVFPREGS fails to properly mark the VFP register set to be
reloaded, because it undoes one of the effects of vfp_flush_hwstate().

Specifically vfp_flush_hwstate() sets thread->vfpstate.hard.cpu to
an invalid CPU number, but vfp_set() overwrites this with the original
CPU number, thereby rendering the hardware state as apparently "valid",
even though the software state is more recent.

Fix this by reverting the previous change.

Cc: <stable@vger.kernel.org>
Fixes: 8130b9d7b9d8 ("ARM: 7308/1: vfp: flush thread hwstate before copying ptrace registers")
Acked-by: Will Deacon <will.deacon@arm.com>
Tested-by: Simon Marchi <simon.marchi@ericsson.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

drm/nouveau/fbcon: fix out-of-bounds memory accesses

[ Upstream commit f045f459d925138fe7d6193a8c86406bda7e49da ]

Reported by KASAN.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

drm/fb-helper: Propagate errors from initial config failure

[ Upstream commit 01934c2a691882185b3021d437df13bcba07711d ]

Make drm_fb_helper_initial_config() return an int rather than a bool so
that the error can be properly propagated. While at it, update drivers
to propagate errors further rather than just ignore them.

v2:
- cirrus: No cleanup is required, the top-level cirrus_driver_load()
  will do it as part of cirrus_driver_unload() in its cleanup path.
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
[danvet: Squash in simplification patch from kbuild.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

scsi: Add QEMU CD-ROM to VPD Inquiry Blacklist

[ Upstream commit fbd83006e3e536fcb103228d2422ea63129ccb03 ]

Linux fails to boot as a guest with a QEMU CD-ROM:

[    4.439488] ata2.00: ATAPI: QEMU CD-ROM, 0.8.2, max UDMA/100
[    4.443649] ata2.00: configured for MWDMA2
[    4.450267] scsi 1:0:0:0: CD-ROM            QEMU     QEMU CD-ROM      0.8. PQ: 0 ANSI: 5
[    4.464317] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[    4.464319] ata2.00: BMDMA stat 0x5
[    4.464339] ata2.00: cmd a0/01:00:00:00:01/00:00:00:00:00/a0 tag 0 dma 16640 in
[    4.464339]          Inquiry 12 01 00 00 ff 00res 48/20:02:00:24:00/00:00:00:00:00/a0 Emask 0x2 (HSM violation)
[    4.464341] ata2.00: status: { DRDY DRQ }
[    4.465864] ata2: soft resetting link
[    4.625971] ata2.00: configured for MWDMA2
[    4.628290] ata2: EH complete
[    4.646670] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[    4.646671] ata2.00: BMDMA stat 0x5
[    4.646683] ata2.00: cmd a0/01:00:00:00:01/00:00:00:00:00/a0 tag 0 dma 16640 in
[    4.646683]          Inquiry 12 01 00 00 ff 00res 48/20:02:00:24:00/00:00:00:00:00/a0 Emask 0x2 (HSM violation)
[    4.646685] ata2.00: status: { DRDY DRQ }
[    4.648193] ata2: soft resetting link

...

Fix this by suppressing VPD inquiry for this device.

Signed-off-by: Ewan D. Milne <emilne@redhat.com>
Reported-by: Jan Stancek <jstancek@redhat.com>
Tested-by: Jan Stancek <jstancek@redhat.com>
Cc: <stable@vger.kernel.org>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

mac80211: mesh: flush mesh paths unconditionally

[ Upstream commit fe7a7c57629e8dcbc0e297363a9b2366d67a6dc5 ]

Currently, the mesh paths associated with a nexthop station are cleaned
up in the following code path:

    __sta_info_destroy_part1
    synchronize_net()
    __sta_info_destroy_part2
     -> cleanup_single_sta
       -> mesh_sta_cleanup
         -> mesh_plink_deactivate
           -> mesh_path_flush_by_nexthop

However, there are a couple of problems here:

1) the paths aren't flushed at all if the MPM is running in userspace
   (e.g. when using wpa_supplicant or authsae)

2) there is no synchronize_rcu between removing the path and readers
   accessing the nexthop, which means the following race is possible:

CPU0                            CPU1
~~~~                            ~~~~
                                sta_info_destroy_part1()
                                synchronize_net()
rcu_read_lock()
mesh_nexthop_resolve()
  mpath = mesh_path_lookup()
                                [...] -> mesh_path_flush_by_nexthop()
  sta = rcu_dereference(
    mpath->next_hop)
                                kfree(sta)
  access sta <-- CRASH

Fix both of these by unconditionally flushing paths before destroying
the sta, and by adding a synchronize_net() after path flush to ensure
no active readers can still dereference the sta.

Fixes this crash:

[  348.529295] BUG: unable to handle kernel paging request at 00020040
[  348.530014] IP: [<f929245d>] ieee80211_mps_set_frame_flags+0x40/0xaa [mac80211]
[  348.530014] *pde = 00000000
[  348.530014] Oops: 0000 [#1] PREEMPT
[  348.530014] Modules linked in: drbg ansi_cprng ctr ccm ppp_generic slhc ipt_MASQUERADE nf_nat_masquerade_ipv4 8021q ]
[  348.530014] CPU: 0 PID: 20597 Comm: wget Tainted: G           O 4.6.0-rc5-wt=V1 #1
[  348.530014] Hardware name: To Be Filled By O.E.M./To be filled by O.E.M., BIOS 080016  11/07/2014
[  348.530014] task: f64fa280 ti: f4f9c000 task.ti: f4f9c000
[  348.530014] EIP: 0060:[<f929245d>] EFLAGS: 00010246 CPU: 0
[  348.530014] EIP is at ieee80211_mps_set_frame_flags+0x40/0xaa [mac80211]
[  348.530014] EAX: f4ce63e0 EBX: 00000088 ECX: f3788416 EDX: 00020008
[  348.530014] ESI: 00000000 EDI: 00000088 EBP: f6409a4c ESP: f6409a40
[  348.530014]  DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 0068
[  348.530014] CR0: 80050033 CR2: 00020040 CR3: 33190000 CR4: 00000690
[  348.530014] Stack:
[  348.530014]  00000000 f4ce63e0 f5f9bd80 f6409a64 f9291d80 0000ce67 f5d51e00 f4ce63e0
[  348.530014]  f3788416 f6409a80 f9291dc1 f4ce8320 f4ce63e0 f5d51e00 f4ce63e0 f4ce8320
[  348.530014]  f6409a98 f9277f6f 00000000 00000000 0000007c 00000000 f6409b2c f9278dd1
[  348.530014] Call Trace:
[  348.530014]  [<f9291d80>] mesh_nexthop_lookup+0xbb/0xc8 [mac80211]
[  348.530014]  [<f9291dc1>] mesh_nexthop_resolve+0x34/0xd8 [mac80211]
[  348.530014]  [<f9277f6f>] ieee80211_xmit+0x92/0xc1 [mac80211]
[  348.530014]  [<f9278dd1>] __ieee80211_subif_start_xmit+0x807/0x83c [mac80211]
[  348.530014]  [<c04df012>] ? sch_direct_xmit+0xd7/0x1b3
[  348.530014]  [<c022a8c6>] ? __local_bh_enable_ip+0x5d/0x7b
[  348.530014]  [<f956870c>] ? nf_nat_ipv4_out+0x4c/0xd0 [nf_nat_ipv4]
[  348.530014]  [<f957e036>] ? iptable_nat_ipv4_fn+0xf/0xf [iptable_nat]
[  348.530014]  [<c04c6f45>] ? netif_skb_features+0x14d/0x30a
[  348.530014]  [<f9278e10>] ieee80211_subif_start_xmit+0xa/0xe [mac80211]
[  348.530014]  [<c04c769c>] dev_hard_start_xmit+0x1f8/0x267
[  348.530014]  [<c04c7261>] ?  validate_xmit_skb.isra.120.part.121+0x10/0x253
[  348.530014]  [<c04defc6>] sch_direct_xmit+0x8b/0x1b3
[  348.530014]  [<c04c7a9c>] __dev_queue_xmit+0x2c8/0x513
[  348.530014]  [<c04c7cfb>] dev_queue_xmit+0xa/0xc
[  348.530014]  [<f91bfc7a>] batadv_send_skb_packet+0xd6/0xec [batman_adv]
[  348.530014]  [<f91bfdc4>] batadv_send_unicast_skb+0x15/0x4a [batman_adv]
[  348.530014]  [<f91b5938>] batadv_dat_send_data+0x27e/0x310 [batman_adv]
[  348.530014]  [<f91c30b5>] ? batadv_tt_global_hash_find.isra.11+0x8/0xa [batman_adv]
[  348.530014]  [<f91b63f3>] batadv_dat_snoop_outgoing_arp_request+0x208/0x23d [batman_adv]
[  348.530014]  [<f91c0cd9>] batadv_interface_tx+0x206/0x385 [batman_adv]
[  348.530014]  [<c04c769c>] dev_hard_start_xmit+0x1f8/0x267
[  348.530014]  [<c04c7261>] ?  validate_xmit_skb.isra.120.part.121+0x10/0x253
[  348.530014]  [<c04defc6>] sch_direct_xmit+0x8b/0x1b3
[  348.530014]  [<c04c7a9c>] __dev_queue_xmit+0x2c8/0x513
[  348.530014]  [<f80cbd2a>] ? igb_xmit_frame+0x57/0x72 [igb]
[  348.530014]  [<c04c7cfb>] dev_queue_xmit+0xa/0xc
[  348.530014]  [<f843a326>] br_dev_queue_push_xmit+0xeb/0xfb [bridge]
[  348.530014]  [<f843a35f>] br_forward_finish+0x29/0x74 [bridge]
[  348.530014]  [<f843a23b>] ? deliver_clone+0x3b/0x3b [bridge]
[  348.530014]  [<f843a714>] __br_forward+0x89/0xe7 [bridge]
[  348.530014]  [<f843a336>] ? br_dev_queue_push_xmit+0xfb/0xfb [bridge]
[  348.530014]  [<f843a234>] deliver_clone+0x34/0x3b [bridge]
[  348.530014]  [<f843a68b>] ? br_flood+0x95/0x95 [bridge]
[  348.530014]  [<f843a66d>] br_flood+0x77/0x95 [bridge]
[  348.530014]  [<f843a809>] br_flood_forward+0x13/0x1a [bridge]
[  348.530014]  [<f843a68b>] ? br_flood+0x95/0x95 [bridge]
[  348.530014]  [<f843b877>] br_handle_frame_finish+0x392/0x3db [bridge]
[  348.530014]  [<c04e9b2b>] ? nf_iterate+0x2b/0x6b
[  348.530014]  [<f843baa6>] br_handle_frame+0x1e6/0x240 [bridge]
[  348.530014]  [<f843b4e5>] ? br_handle_local_finish+0x6a/0x6a [bridge]
[  348.530014]  [<c04c4ba0>] __netif_receive_skb_core+0x43a/0x66b
[  348.530014]  [<f843b8c0>] ? br_handle_frame_finish+0x3db/0x3db [bridge]
[  348.530014]  [<c023cea4>] ? resched_curr+0x19/0x37
[  348.530014]  [<c0240707>] ? check_preempt_wakeup+0xbf/0xfe
[  348.530014]  [<c0255dec>] ? ktime_get_with_offset+0x5c/0xfc
[  348.530014]  [<c04c4fc1>] __netif_receive_skb+0x47/0x55
[  348.530014]  [<c04c57ba>] netif_receive_skb_internal+0x40/0x5a
[  348.530014]  [<c04c61ef>] napi_gro_receive+0x3a/0x94
[  348.530014]  [<f80ce8d5>] igb_poll+0x6fd/0x9ad [igb]
[  348.530014]  [<c0242bd8>] ? swake_up_locked+0x14/0x26
[  348.530014]  [<c04c5d29>] net_rx_action+0xde/0x250
[  348.530014]  [<c022a743>] __do_softirq+0x8a/0x163
[  348.530014]  [<c022a6b9>] ? __hrtimer_tasklet_trampoline+0x19/0x19
[  348.530014]  [<c021100f>] do_softirq_own_stack+0x26/0x2c
[  348.530014]  <IRQ>
[  348.530014]  [<c022a957>] irq_exit+0x31/0x6f
[  348.530014]  [<c0210eb2>] do_IRQ+0x8d/0xa0
[  348.530014]  [<c058152c>] common_interrupt+0x2c/0x40
[  348.530014] Code: e7 8c 00 66 81 ff 88 00 75 12 85 d2 75 0e b2 c3 b8 83 e9 29 f9 e8 a7 5f f9 c6 eb 74 66 81 e3 8c 005
[  348.530014] EIP: [<f929245d>] ieee80211_mps_set_frame_flags+0x40/0xaa [mac80211] SS:ESP 0068:f6409a40
[  348.530014] CR2: 0000000000020040
[  348.530014] ---[ end trace 48556ac26779732e ]---
[  348.530014] Kernel panic - not syncing: Fatal exception in interrupt
[  348.530014] Kernel Offset: disabled

Cc: stable@vger.kernel.org
Reported-by: Fred Veldini <fred.veldini@gmail.com>
Tested-by: Fred Veldini <fred.veldini@gmail.com>
Signed-off-by: Bob Copeland <me@bobcopeland.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

mac80211_hwsim: Add missing check for HWSIM_ATTR_SIGNAL

[ Upstream commit 62397da50bb20a6b812c949ef465d7e69fe54bb6 ]

A wmediumd that does not send this attribute causes a NULL pointer
dereference, as the attribute is accessed even if it does not exist.

The attribute was required but never checked ever since userspace frame
forwarding has been introduced. The issue gets more problematic once we
allow wmediumd registration from user namespaces.

Cc: stable@vger.kernel.org
Fixes: 7882513bacb1 ("mac80211_hwsim driver support userspace frame tx/rx")
Signed-off-by: Martin Willi <martin@strongswan.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

powerpc: Use privileged SPR number for MMCR2

[ Upstream commit 8dd75ccb571f3c92c48014b3dabd3d51a115ab41 ]

We are already using the privileged versions of MMCR0, MMCR1
and MMCRA in the kernel, so for MMCR2, we should better use
the privileged versions, too, to be consistent.

Fixes: 240686c13687 ("powerpc: Initialise PMU related regs on Power8")
Cc: stable@vger.kernel.org # v3.10+
Suggested-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Acked-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

powerpc: Fix definition of SIAR and SDAR registers

[ Upstream commit d23fac2b27d94aeb7b65536a50d32bfdc21fe01e ]

The SIAR and SDAR registers are available twice, one time as SPRs
780 / 781 (unprivileged, but read-only), and one time as the SPRs
796 / 797 (privileged, but read and write). The Linux kernel code
currently uses the unprivileged  SPRs - while this is OK for reading,
writing to that register of course does not work.
Since the KVM code tries to write to this register, too (see the mtspr
in book3s_hv_rmhandlers.S), the contents of this register sometimes get
lost for the guests, e.g. during migration of a VM.
To fix this issue, simply switch to the privileged SPR numbers instead.

Cc: stable@vger.kernel.org
Signed-off-by: Thomas Huth <thuth@redhat.com>
Acked-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

powerpc/pseries/eeh: Handle RTAS delay requests in configure_bridge

[ Upstream commit 871e178e0f2c4fa788f694721a10b4758d494ce1 ]

In the "ibm,configure-pe" and "ibm,configure-bridge" RTAS calls, the
spec states that values of 9900-9905 can be returned, indicating that
software should delay for 10^x (where x is the last digit, i.e. 990x)
milliseconds and attempt the call again. Currently, the kernel doesn't
know about this, and respecting it fixes some PCI failures when the
hypervisor is busy.

The delay is capped at 0.2 seconds.

Cc: <stable@vger.kernel.org> # 3.10+
Signed-off-by: Russell Currey <ruscur@russell.cc>
Acked-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

crypto: ccp - Fix AES XTS error for request sizes above 4096

[ Upstream commit ab6a11a7c8ef47f996974dd3c648c2c0b1a36ab1 ]

The ccp-crypto module for AES XTS support has a bug that can allow requests
greater than 4096 bytes in size to be passed to the CCP hardware. The CCP
hardware does not support request sizes larger than 4096, resulting in
incorrect output. The request should actually be handled by the fallback
mechanism instantiated by the ccp-crypto module.

Add a check to insure the request size is less than or equal to the maximum
supported size and use the fallback mechanism if it is not.

Cc: <stable@vger.kernel.org> # 3.14.x-
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

scsi_lib: correctly retry failed zero length REQ_TYPE_FS commands

[ Upstream commit a621bac3044ed6f7ec5fa0326491b2d4838bfa93 ]

When SCSI was written, all commands coming from the filesystem
(REQ_TYPE_FS commands) had data.  This meant that our signal for needing
to complete the command was the number of bytes completed being equal to
the number of bytes in the request.  Unfortunately, with the advent of
flush barriers, we can now get zero length REQ_TYPE_FS commands, which
confuse this logic because they satisfy the condition every time.  This
means they never get retried even for retryable conditions, like UNIT
ATTENTION because we complete them early assuming they're done.  Fix
this by special casing the early completion condition to recognise zero
length commands with errors and let them drop through to the retry code.

Cc: stable@vger.kernel.org
Reported-by: Sebastian Parschauer <s.parschauer@gmx.de>
Signed-off-by: James E.J. Bottomley <jejb@linux.vnet.ibm.com>
Tested-by: Jack Wang <jinpu.wang@profitbricks.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

crypto: public_key: select CRYPTO_AKCIPHER

[ Upstream commit bad6a185b4d6f81d0ed2b6e4c16307969f160b95 ]

In some rare randconfig builds, we can end up with
ASYMMETRIC_PUBLIC_KEY_SUBTYPE enabled but CRYPTO_AKCIPHER disabled,
which fails to link because of the reference to crypto_alloc_akcipher:

crypto/built-in.o: In function `public_key_verify_signature':
:(.text+0x110e4): undefined reference to `crypto_alloc_akcipher'

This adds a Kconfig 'select' statement to ensure the dependency
is always there.

Cc: <stable@vger.kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

Linux 3.18.35

Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

dma-debug: avoid spinlock recursion when disabling dma-debug

[ Upstream commit 3017cd63f26fc655d56875aaf497153ba60e9edf ]

With netconsole (at least) the pr_err("...  disablingn") call can
recurse back into the dma-debug code, where it'll try to grab
free_entries_lock again.  Avoid the problem by doing the printk after
dropping the lock.

Link: http://lkml.kernel.org/r/1463678421-18683-1-git-send-email-ville.syrjala@linux.intel.com
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

UBI: Fix static volume checks when Fastmap is used

[ Upstream commit 1900149c835ab5b48bea31a823ea5e5a401fb560 ]

Ezequiel reported that he's facing UBI going into read-only
mode after power cut. It turned out that this behavior happens
only when updating a static volume is interrupted and Fastmap is
used.

A possible trace can look like:
ubi0 warning: ubi_io_read_vid_hdr [ubi]: no VID header found at PEB 2323, only 0xFF bytes
ubi0 warning: ubi_eba_read_leb [ubi]: switch to read-only mode
CPU: 0 PID: 833 Comm: ubiupdatevol Not tainted 4.6.0-rc2-ARCH #4
Hardware name: SAMSUNG ELECTRONICS CO., LTD. 300E4C/300E5C/300E7C/NP300E5C-AD8AR, BIOS P04RAP 10/15/2012
0000000000000286 00000000eba949bd ffff8800c45a7b38 ffffffff8140d841
ffff8801964be000 ffff88018eaa4800 ffff8800c45a7bb8 ffffffffa003abf6
ffffffff850e2ac0 8000000000000163 ffff8801850e2ac0 ffff8801850e2ac0
Call Trace:
[<ffffffff8140d841>] dump_stack+0x63/0x82
[<ffffffffa003abf6>] ubi_eba_read_leb+0x486/0x4a0 [ubi]
[<ffffffffa00453b3>] ubi_check_volume+0x83/0xf0 [ubi]
[<ffffffffa0039d97>] ubi_open_volume+0x177/0x350 [ubi]
[<ffffffffa00375d8>] vol_cdev_open+0x58/0xb0 [ubi]
[<ffffffff8124b08e>] chrdev_open+0xae/0x1d0
[<ffffffff81243bcf>] do_dentry_open+0x1ff/0x300
[<ffffffff8124afe0>] ? cdev_put+0x30/0x30
[<ffffffff81244d36>] vfs_open+0x56/0x60
[<ffffffff812545f4>] path_openat+0x4f4/0x1190
[<ffffffff81256621>] do_filp_open+0x91/0x100
[<ffffffff81263547>] ? __alloc_fd+0xc7/0x190
[<ffffffff812450df>] do_sys_open+0x13f/0x210
[<ffffffff812451ce>] SyS_open+0x1e/0x20
[<ffffffff81a99e32>] entry_SYSCALL_64_fastpath+0x1a/0xa4

UBI checks static volumes for data consistency and reads the
whole volume upon first open. If the volume is found erroneous
users of UBI cannot read from it, but another volume update is
possible to fix it. The check is performed by running
ubi_eba_read_leb() on every allocated LEB of the volume.
For static volumes ubi_eba_read_leb() computes the checksum of all
data stored in a LEB. To verify the computed checksum it has to read
the LEB's volume header which stores the original checksum.
If the volume header is not found UBI treats this as fatal internal
error and switches to RO mode. If the UBI device was attached via a
full scan the assumption is correct, the volume header has to be
present as it had to be there while scanning to get known as mapped.
If the attach operation happened via Fastmap the assumption is no
longer correct. When attaching via Fastmap UBI learns the mapping
table from Fastmap's snapshot of the system state and not via a full
scan. It can happen that a LEB got unmapped after a Fastmap was
written to the flash. Then UBI can learn the LEB still as mapped and
accessing it returns only 0xFF bytes. As UBI is not a FTL it is
allowed to have mappings to empty PEBs, it assumes that the layer
above takes care of LEB accounting and referencing.
UBIFS does so using the LEB property tree (LPT).
For static volumes UBI blindly assumes that all LEBs are present and
therefore special actions have to be taken.

The described situation can happen when updating a static volume is
interrupted, either by a user or a power cut.
The volume update code first unmaps all LEBs of a volume and then
writes LEB by LEB. If the sequence of operations is interrupted UBI
detects this either by the absence of LEBs, no volume header present
at scan time, or corrupted payload, detected via checksum.
In the Fastmap case the former method won't trigger as no scan
happened and UBI automatically thinks all LEBs are present.
Only by reading data from a LEB it detects that the volume header is
missing and incorrectly treats this as fatal error.
To deal with the situation ubi_eba_read_leb() from now on checks
whether we attached via Fastmap and handles the absence of a
volume header like a data corruption error.
This way interrupted static volume updates will correctly get detected
also when Fastmap is used.

Cc: <stable@vger.kernel.org>
Reported-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Tested-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

UBI: fix missing brace control flow

[ Upstream commit b388e6a7a6ba988998ddd83919ae8d3debf1a13d ]

commit 0e707ae79ba3 ("UBI: do propagate positive error codes up") seems
to have produced an unintended change in the control flow here.

Completely untested, but it looks obvious.

Caught by Coverity, which didn't like the indentation. CID 1271184.

Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

UBI: do propagate positive error codes up

[ Upstream commit 0e707ae79ba357d60b8a36025ec8968e5020d827 ]

UBI uses positive function return codes internally, and should not propagate
them up, except in the place this path fixes. Here is the original bug report
from Dan Carpenter:

The problem is really in ubi_eba_read_leb().

drivers/mtd/ubi/eba.c
   412                  err = ubi_io_read_vid_hdr(ubi, pnum, vid_hdr, 1);
   413                  if (err && err != UBI_IO_BITFLIPS) {
   414                          if (err > 0) {
   415                                  /*
   416                                   * The header is either absent or corrupted.
   417                                   * The former case means there is a bug -
   418                                   * switch to read-only mode just in case.
   419                                   * The latter case means a real corruption - we
   420                                   * may try to recover data. FIXME: but this is
   421                                   * not implemented.
   422                                   */
   423                                  if (err == UBI_IO_BAD_HDR_EBADMSG ||
   424                                      err == UBI_IO_BAD_HDR) {
   425                                          ubi_warn("corrupted VID header at PEB %d, LEB %d:%d",
   426                                                   pnum, vol_id, lnum);
   427                                          err = -EBADMSG;
   428                                  } else
   429                                          ubi_ro_mode(ubi);

On this path we return UBI_IO_FF and UBI_IO_FF_BITFLIPS and it
eventually gets passed to ERR_PTR().  We probably dereference the bad
pointer and oops.  At that point we've gone read only so it was already
a bad situation...

   430                          }
   431                          goto out_free;
   432                  } else if (err == UBI_IO_BITFLIPS)
   433                          scrub = 1;
   434

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

UBI: Fastmap: Ensure that only one fastmap work is scheduled

[ Upstream commit 19371d73c9bd31a8e634ec5a80fc19fcd7714481 ]

If the WL pool runs out of PEBs we schedule a fastmap write
to refill it as soon as possible.
Ensure that only one at a time is scheduled otherwise we might end in
a fastmap write storm because writing the fastmap can schedule another
write if bitflips are detected.

Signed-off-by: Richard Weinberger <richard@nod.at>
Reviewed-by: Tanya Brokhman <tlinder@codeaurora.org>
Reviewed-by: Guido Martínez <guido@vanguardiasur.com.ar>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

xen/events: Don't move disabled irqs

[ Upstream commit f0f393877c71ad227d36705d61d1e4062bc29cf5 ]

Commit ff1e22e7a638 ("xen/events: Mask a moving irq") open-coded
irq_move_irq() but left out checking if the IRQ is disabled. This broke
resuming from suspend since it tries to move a (disabled) irq without
holding the IRQ's desc->lock. Fix it by adding in a check for disabled
IRQs.

The resulting stacktrace was:
kernel BUG at /build/linux-UbQGH5/linux-4.4.0/kernel/irq/migration.c:31!
invalid opcode: 0000 [#1] SMP
Modules linked in: xenfs xen_privcmd ...
CPU: 0 PID: 9 Comm: migration/0 Not tainted 4.4.0-22-generic #39-Ubuntu
Hardware name: Xen HVM domU, BIOS 4.6.1-xs125180 05/04/2016
task: ffff88003d75ee00 ti: ffff88003d7bc000 task.ti: ffff88003d7bc000
RIP: 0010:[<ffffffff810e26e2>]  [<ffffffff810e26e2>] irq_move_masked_irq+0xd2/0xe0
RSP: 0018:ffff88003d7bfc50  EFLAGS: 00010046
RAX: 0000000000000000 RBX: ffff88003d40ba00 RCX: 0000000000000001
RDX: 0000000000000001 RSI: 0000000000000100 RDI: ffff88003d40bad8
RBP: ffff88003d7bfc68 R08: 0000000000000000 R09: ffff88003d000000
R10: 0000000000000000 R11: 000000000000023c R12: ffff88003d40bad0
R13: ffffffff81f3a4a0 R14: 0000000000000010 R15: 00000000ffffffff
FS:  0000000000000000(0000) GS:ffff88003da00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fd4264de624 CR3: 0000000037922000 CR4: 00000000003406f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Stack:
 ffff88003d40ba38 0000000000000024 0000000000000000 ffff88003d7bfca0
 ffffffff814c8d92 00000010813ef89d 00000000805ea732 0000000000000009
 0000000000000024 ffff88003cc39b80 ffff88003d7bfce0 ffffffff814c8f66
Call Trace:
 [<ffffffff814c8d92>] eoi_pirq+0xb2/0xf0
 [<ffffffff814c8f66>] __startup_pirq+0xe6/0x150
 [<ffffffff814ca659>] xen_irq_resume+0x319/0x360
 [<ffffffff814c7e75>] xen_suspend+0xb5/0x180
 [<ffffffff81120155>] multi_cpu_stop+0xb5/0xe0
 [<ffffffff811200a0>] ? cpu_stop_queue_work+0x80/0x80
 [<ffffffff811203d0>] cpu_stopper_thread+0xb0/0x140
 [<ffffffff810a94e6>] ? finish_task_switch+0x76/0x220
 [<ffffffff810ca731>] ? __raw_callee_save___pv_queued_spin_unlock+0x11/0x20
 [<ffffffff810a3935>] smpboot_thread_fn+0x105/0x160
 [<ffffffff810a3830>] ? sort_range+0x30/0x30
 [<ffffffff810a0588>] kthread+0xd8/0xf0
 [<ffffffff810a04b0>] ? kthread_create_on_node+0x1e0/0x1e0
 [<ffffffff8182568f>] ret_from_fork+0x3f/0x70
 [<ffffffff810a04b0>] ? kthread_create_on_node+0x1e0/0x1e0

Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

xen/x86: actually allocate legacy interrupts on PV guests

[ Upstream commit 702f926067d2a4b28c10a3c41a1172dd62d9e735 ]

b4ff8389ed14 is incomplete: relies on nr_legacy_irqs() to get the number
of legacy interrupts when actually nr_legacy_irqs() returns 0 after
probe_8259A(). Use NR_IRQS_LEGACY instead.

Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
CC: stable@vger.kernel.org
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

x86/xen: Override ACPI IRQ management callback __acpi_unregister_gsi

[ Upstream commit 8abb850a03a3a8b11a0e92949e5b99d9cc178e35 ]

Xen overrides __acpi_register_gsi and leaves __acpi_unregister_gsi as is.
That means, an IRQ allocated by acpi_register_gsi_xen_hvm() or
acpi_register_gsi_xen() will be freed by acpi_unregister_gsi_ioapic(),
which may cause undesired effects. So override __acpi_unregister_gsi to
NULL for safety.

Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Tested-by: Sander Eikelenboom <linux@eikelenboom.it>
Cc: Tony Luck <tony.luck@intel.com>
Cc: xen-devel@lists.xenproject.org
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: David Vrabel <david.vrabel@citrix.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Graeme Gregory <graeme.gregory@linaro.org>
Cc: Lv Zheng <lv.zheng@intel.com>
Link: http://lkml.kernel.org/r/1421720467-7709-4-git-send-email-jiang.liu@linux.intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

wait/ptrace: assume __WALL if the child is traced

[ Upstream commit bf959931ddb88c4e4366e96dd22e68fa0db9527c ]

The following program (simplified version of generated by syzkaller)

#include <pthread.h>
#include <unistd.h>
#include <sys/ptrace.h>
#include <stdio.h>
#include <signal.h>

void *thread_func(void *arg)
{
ptrace(PTRACE_TRACEME, 0,0,0);
return 0;
}

int main(void)
{
pthread_t thread;

if (fork())
return 0;

while (getppid() != 1)
;

pthread_create(&thread, NULL, thread_func, NULL);
pthread_join(thread, NULL);
return 0;
}

creates an unreapable zombie if /sbin/init doesn't use __WALL.

This is not a kernel bug, at least in a sense that everything works as
expected: debugger should reap a traced sub-thread before it can reap the
leader, but without __WALL/__WCLONE do_wait() ignores sub-threads.

Unfortunately, it seems that /sbin/init in most (all?) distributions
doesn't use it and we have to change the kernel to avoid the problem.
Note also that most init's use sys_waitid() which doesn't allow __WALL, so
the necessary user-space fix is not that trivial.

This patch just adds the "ptrace" check into eligible_child().  To some
degree this matches the "tsk->ptrace" in exit_notify(), ->exit_signal is
mostly ignored when the tracee reports to debugger.  Or WSTOPPED, the
tracer doesn't need to set this flag to wait for the stopped tracee.

This obviously means the user-visible change: __WCLONE and __WALL no
longer have any meaning for debugger.  And I can only hope that this won't
break something, but at least strace/gdb won't suffer.

We could make a more conservative change.  Say, we can take __WCLONE into
account, or !thread_group_leader().  But it would be nice to not
complicate these historical/confusing checks.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Jan Kratochvil <jan.kratochvil@redhat.com>
Cc: "Michael Kerrisk (man-pages)" <mtk.manpages@gmail.com>
Cc: Pedro Alves <palves@redhat.com>
Cc: Roland McGrath <roland@hack.frob.com>
Cc: <syzkaller@googlegroups.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

sunrpc: fix stripping of padded MIC tokens

[ Upstream commit c0cb8bf3a8e4bd82e640862cdd8891400405cb89 ]

The length of the GSS MIC token need not be a multiple of four bytes.
It is then padded by XDR to a multiple of 4 B, but unwrap_integ_data()
would previously only trim mic.len + 4 B. The remaining up to three
bytes would then trigger a check in nfs4svc_decode_compoundargs(),
leading to a "garbage args" error and mount failure:

nfs4svc_decode_compoundargs: compound not properly padded!
nfsd: failed to decode arguments!

This would prevent older clients using the pre-RFC 4121 MIC format
(37-byte MIC including a 9-byte OID) from mounting exports from v3.9+
servers using krb5i.

The trimming was introduced by commit 4c190e2f913f ("sunrpc: trim off
trailing checksum before returning decrypted or integrity authenticated
buffer").

Fixes: 4c190e2f913f "unrpc: trim off trailing checksum..."
Signed-off-by: Tomáš Trnka <ttrnka@mail.muni.cz>
Cc: stable@vger.kernel.org
Acked-by: Jeff Layton <jlayton@poochiereds.net>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

mmc: sdhci-acpi: Remove MMC_CAP_BUS_WIDTH_TEST for Intel controllers

[ Upstream commit 265984b36ce82fec67957d452dd2b22e010611e4 ]

The CMD19/CMD14 bus width test has been found to be unreliable in
some cases.  It is not essential, so simply remove it.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

mmc: sdhci-acpi: Add two host capabilities for Intel

[ Upstream commit 9d65cb88e5979d43f47c899601353ca61973ba90 ]

Intel host controllers are capable of doing the bus
width test and of waiting while busy, so add the
capability flags.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

mmc: longer timeout for long read time quirk

[ Upstream commit 32ecd320db39bcb007679ed42f283740641b81ea ]

008GE0 Toshiba mmc in some Intel Baytrail tablets responds to
MMC_SEND_EXT_CSD in 450-600ms.

This patch will...

() Increase the long read time quirk timeout from 300ms to 600ms. Original
   author of that quirk says 300ms was only a guess and that the number
   may need to be raised in the future.

() Add this specific MMC to the quirk

Signed-off-by: Matt Gumbel <matthew.k.gumbel@intel.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

drm/i915: Don't leave old junk in ilk active watermarks on readout

[ Upstream commit 7045c3689f148a0c95f42bae8ef3eb2829ac7de9 ]

When we read out the watermark state from the hardware we're supposed to
transfer that into the active watermarks, but currently we fail to any
part of the active watermarks that isn't explicitly written. Let's clear
it all upfront.

Looks like this has been like this since the beginning, when I added the
readout. No idea why I didn't clear it up.

Cc: Matt Roper <matthew.d.roper@intel.com>
Fixes: 243e6a44b9ca ("drm/i915: Init HSW watermark tracking in intel_modeset_setup_hw_state()")
Cc: stable@vger.kernel.org
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1463151318-14719-2-git-send-email-ville.syrjala@linux.intel.com
(cherry picked from commit 15606534bf0a65d8a74a90fd57b8712d147dbca6)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

PM / sleep: Handle failures in device_suspend_late() consistently

[ Upstream commit 3a17fb329da68cb00558721aff876a80bba2fdb9 ]

Grygorii Strashko reports:

 The PM runtime will be left disabled for the device if its
 .suspend_late() callback fails and async suspend is not allowed
 for this device. In this case device will not be added in
 dpm_late_early_list and dpm_resume_early() will ignore this
 device, as result PM runtime will be disabled for it forever
 (side effect: after 8 subsequent failures for the same device
 the PM runtime will be reenabled due to disable_depth overflow).

To fix this problem, add devices to dpm_late_early_list regardless
of whether or not device_suspend_late() returns errors for them.

That will ensure failures in there to be handled consistently for
all devices regardless of their async suspend/resume status.

Reported-by: Grygorii Strashko <grygorii.strashko@ti.com>
Tested-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

Input: uinput - handle compat ioctl for UI_SET_PHYS

[ Upstream commit affa80bd97f7ca282d1faa91667b3ee9e4c590e6 ]

When running a 32-bit userspace on a 64-bit kernel, the UI_SET_PHYS
ioctl needs to be treated with special care, as it has the pointer
size encoded in the command.

Signed-off-by: Ricky Liang <jcliang@chromium.org>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

cifs: Create dedicated keyring for spnego operations

[ Upstream commit b74cb9a80268be5c80cf4c87c74debf0ff2129ac ]

The session key is the default keyring set for request_key operations.
This session key is revoked when the user owning the session logs out.
Any long running daemon processes started by this session ends up with
revoked session keyring which prevents these processes from using the
request_key mechanism from obtaining the krb5 keys.

The problem has been reported by a large number of autofs users. The
problem is also seen with multiuser mounts where the share may be used
by processes run by a user who has since logged out. A reproducer using
automount is available on the Red Hat bz.

The patch creates a new keyring which is used to cache cifs spnego
upcalls.

Red Hat bz: 1267754

Signed-off-by: Sachin Prabhu <sprabhu@redhat.com>
Reported-by: Scott Mayhew <smayhew@redhat.com>
Reviewed-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
CC: Stable <stable@vger.kernel.org>
Signed-off-by: Steve French <smfrench@gmail.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

ASoC: ak4642: Enable cache usage to fix crashes on resume

[ Upstream commit d3030d11961a8c103cf07aed59905276ddfc06c2 ]

The ak4642 driver is using a regmap cache sync to restore the
configuration of the chip on resume but (as Peter observed) does not
actually define a register cache which means that the resume is never
going to work and we trigger asserts in regmap.  Fix this by enabling
caching.

Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reported-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

ASoC: ak4642: Fix up max_register setting

[ Upstream commit f8ea6cebcfa6499949392da71fc427567c9e5a0e ]

The max_register setting for ak4642, ak4643 and ak4648 are wrong, fix it.

According to the datasheet:
        the maximum valid register for ak4642 is 0x1f
        the maximum valid register for ak4643 is 0x24
        the maximum valid register for ak4648 is 0x27

The default settings for ak4642 and ak4643 are the same for 0x0 ~ 0x1f
registers, so it's fine to use the same reg_default table with differnt
num_reg_defaults setting.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Tested-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

xfs: skip stale inodes in xfs_iflush_cluster

[ Upstream commit 7d3aa7fe970791f1a674b14572a411accf2f4d4e ]

We don't write back stale inodes so we should skip them in
xfs_iflush_cluster, too.

cc: <stable@vger.kernel.org> # 3.10.x-
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

xfs: fix inode validity check in xfs_iflush_cluster

[ Upstream commit 51b07f30a71c27405259a0248206ed4e22adbee2 ]

Some careless idiot(*) wrote crap code in commit 1a3e8f3 ("xfs:
convert inode cache lookups to use RCU locking") back in late 2010,
and so xfs_iflush_cluster checks the wrong inode for whether it is
still valid under RCU protection. Fix it to lock and check the
correct inode.

(*) Careless-idiot: Dave Chinner <dchinner@redhat.com>

cc: <stable@vger.kernel.org> # 3.10.x-
Discovered-by: Brain Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

xfs: xfs_iflush_cluster fails to abort on error

[ Upstream commit b1438f477934f5a4d5a44df26f3079a7575d5946 ]

When a failure due to an inode buffer occurs, the error handling
fails to abort the inode writeback correctly. This can result in the
inode being reclaimed whilst still in the AIL, leading to
use-after-free situations as well as filesystems that cannot be
unmounted as the inode log items left in the AIL never get removed.

Fix this by ensuring fatal errors from xfs_imap_to_bp() result in
the inode flush being aborted correctly.

cc: <stable@vger.kernel.org> # 3.10.x-
Reported-by: Shyam Kaushik <shyam@zadarastorage.com>
Diagnosed-by: Shyam Kaushik <shyam@zadarastorage.com>
Tested-by: Shyam Kaushik <shyam@zadarastorage.com>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

cpuidle: Fix cpuidle_state_is_coupled() argument in cpuidle_enter()

[ Upstream commit e7387da52028b072489c45efeb7a916c0205ebd2 ]

Commit 0b89e9aa2856 (cpuidle: delay enabling interrupts until all
coupled CPUs leave idle) rightfully fixed a regression by letting
the coupled idle state framework to handle local interrupt enabling
when the CPU is exiting an idle state.

The current code checks if the idle state is coupled and, if so, it
will let the coupled code to enable interrupts. This way, it can
decrement the ready-count before handling the interrupt. This
mechanism prevents the other CPUs from waiting for a CPU which is
handling interrupts.

But the check is done against the state index returned by the back
end driver's ->enter functions which could be different from the
initial index passed as parameter to the cpuidle_enter_state()
function.

 entered_state = target_state->enter(dev, drv, index);

 [ ... ]

 if (!cpuidle_state_is_coupled(drv, entered_state))
local_irq_enable();

 [ ... ]

If the 'index' is referring to a coupled idle state but the
'entered_state' is *not* coupled, then the interrupts are enabled
again. All CPUs blocked on the sync barrier may busy loop longer
if the CPU has interrupts to handle before decrementing the
ready-count. That's consuming more energy than saving.

Fixes: 0b89e9aa2856 (cpuidle: delay enabling interrupts until all coupled CPUs leave idle)
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: 3.15+ <stable@vger.kernel.org> # 3.15+
[ rjw: Subject & changelog ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

remove directory incorrectly tries to set delete on close on non-empty directories

[ Upstream commit 897fba1172d637d344f009d700f7eb8a1fa262f1 ]

Wrong return code was being returned on SMB3 rmdir of
non-empty directory.

For SMB3 (unlike for cifs), we attempt to delete a directory by
set of delete on close flag on the open. Windows clients set
this flag via a set info (SET_FILE_DISPOSITION to set this flag)
which properly checks if the directory is empty.

With this patch on smb3 mounts we correctly return
 "DIRECTORY NOT EMPTY"
on attempts to remove a non-empty directory.

Signed-off-by: Steve French <steve.french@primarydata.com>
CC: Stable <stable@vger.kernel.org>
Acked-by: Sachin Prabhu <sprabhu@redhat.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>