prctl: allow to setup brk for et_dyn executables

commit e1fbbd073137a9d63279f6bf363151a938347640 upstream.

Keno Fischer reported that when a binray loaded via ld-linux-x the
prctl(PR_SET_MM_MAP) doesn't allow to setup brk value because it lays
before mm:end_data.

For example a test program shows

 | # ~/t
 |
 | start_code      401000
 | end_code        401a15
 | start_stack     7ffce4577dd0
 | start_data    403e10
 | end_data        40408c
 | start_brk    b5b000
 | sbrk(0)         b5b000

and when executed via ld-linux

 | # /lib64/ld-linux-x86-64.so.2 ~/t
 |
 | start_code      7fc25b0a4000
 | end_code        7fc25b0c4524
 | start_stack     7fffcc6b2400
 | start_data    7fc25b0ce4c0
 | end_data        7fc25b0cff98
 | start_brk    55555710c000
 | sbrk(0)         55555710c000

This of course prevent criu from restoring such programs.  Looking into
how kernel operates with brk/start_brk inside brk() syscall I don't see
any problem if we allow to setup brk/start_brk without checking for
end_data.  Even if someone pass some weird address here on a purpose then
the worst possible result will be an unexpected unmapping of existing vma
(own vma, since prctl works with the callers memory) but test for
RLIMIT_DATA is still valid and a user won't be able to gain more memory in
case of expanding VMAs via new values shipped with prctl call.

Link: https://lkml.kernel.org/r/20210121221207.GB2174@grain
Fixes: bbdc6076d2e5 ("binfmt_elf: move brk out of mmap when doing direct loader exec")
Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com>
Reported-by: Keno Fischer <keno@juliacomputing.com>
Acked-by: Andrey Vagin <avagin@gmail.com>
Tested-by: Andrey Vagin <avagin@gmail.com>
Cc: Dmitry Safonov <0x7f454c46@gmail.com>
Cc: Kirill Tkhai <ktkhai@virtuozzo.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Pavel Tikhomirov <ptikhomirov@virtuozzo.com>
Cc: Alexander Mikhalitsyn <alexander.mikhalitsyn@virtuozzo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

9p/trans_virtio: Remove sysfs file on probe failure

commit f997ea3b7afc108eb9761f321b57de2d089c7c48 upstream.

This ensures we don't leak the sysfs file if we failed to
allocate chan->vc_wq during probe.

Link: http://lkml.kernel.org/r/20210517083557.172-1-xieyongji@bytedance.com
Fixes: 86c8437383ac ("net/9p: Add sysfs mount_tag file for virtio 9P device")
Signed-off-by: Xie Yongji <xieyongji@bytedance.com>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

thermal/drivers/exynos: Fix an error code in exynos_tmu_probe()

commit 02d438f62c05f0d055ceeedf12a2f8796b258c08 upstream.

This error path return success but it should propagate the negative
error code from devm_clk_get().

Fixes: 6c247393cfdd ("thermal: exynos: Add TMU support for Exynos7 SoC")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20210810084413.GA23810@kili
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dmaengine: acpi: Avoid comparison GSI with Linux vIRQ

commit 67db87dc8284070adb15b3c02c1c31d5cf51c5d6 upstream.

Currently the CRST parsing relies on the fact that on most of x86 devices
the IRQ mapping is 1:1 with Linux vIRQ. However, it may be not true for
some. Fix this by converting GSI to Linux vIRQ before checking it.

Fixes: ee8209fd026b ("dma: acpi-dma: parse CSRT to extract additional resources")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210730202715.24375-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

um: virtio_uml: fix memory leak on init failures

commit 7ad28e0df7ee9dbcb793bb88dd81d4d22bb9a10e upstream.

If initialization fails, e.g. because the connection failed,
we leak the 'vu_dev'. Fix that. Reported by smatch.

Fixes: 5d38f324993f ("um: drivers: Add virtio vhost-user driver")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Acked-By: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192u: Fix bitwise vs logical operator in TranslateRxSignalStuff819xUsb()

commit 099ec97ac92911abfb102bb5c68ed270fc12e0dd upstream.

clang warns:

drivers/staging/rtl8192u/r8192U_core.c:4268:20: warning: bitwise and of
boolean expressions; did you mean logical and? [-Wbool-operation-and]
        bpacket_toself =  bpacket_match_bssid &
                          ^~~~~~~~~~~~~~~~~~~~~
                                              &&
1 warning generated.

Replace the bitwise AND with a logical one to clear up the warning, as
that is clearly what was intended.

Fixes: 8fc8598e61f6 ("Staging: Added Realtek rtl8192u driver to staging")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20210814235625.1780033-1-nathan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sctp: add param size validation for SCTP_PARAM_SET_PRIMARY

commit ef6c8d6ccf0c1dccdda092ebe8782777cd7803c9 upstream.

When SCTP handles an INIT chunk, it calls for example:
sctp_sf_do_5_1B_init
  sctp_verify_init
    sctp_verify_param
  sctp_process_init
    sctp_process_param
      handling of SCTP_PARAM_SET_PRIMARY

sctp_verify_init() wasn't doing proper size validation and neither the
later handling, allowing it to work over the chunk itself, possibly being
uninitialized memory.

Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sctp: validate chunk size in __rcv_asconf_lookup

commit b6ffe7671b24689c09faa5675dd58f93758a97ae upstream.

In one of the fallbacks that SCTP has for identifying an association for an
incoming packet, it looks for AddIp chunk (from ASCONF) and take a peek.
Thing is, at this stage nothing was validating that the chunk actually had
enough content for that, allowing the peek to happen over uninitialized
memory.

Similar check already exists in actual asconf handling in
sctp_verify_asconf().

Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: 9098/1: ftrace: MODULE_PLT: Fix build problem without DYNAMIC_FTRACE

commit 6fa630bf473827aee48cbf0efbbdf6f03134e890 upstream

FTRACE_ADDR is only defined when CONFIG_DYNAMIC_FTRACE is defined, the
latter is even stronger requirement than CONFIG_FUNCTION_TRACER (which is
enough for MCOUNT_ADDR).

Link: https://lists.01.org/hyperkitty/list/kbuild-all@lists.01.org/thread/ZUVCQBHDMFVR7CCB7JPESLJEWERZDJ3T/
Fixes: 1f12fb25c5c5d22f ("ARM: 9079/1: ftrace: Add MODULE_PLTS support")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: 9079/1: ftrace: Add MODULE_PLTS support

commit 79f32b221b18c15a98507b101ef4beb52444cc6f upstream

Teach ftrace_make_call() and ftrace_make_nop() about PLTs.
Teach PLT code about FTRACE and all its callbacks.
Otherwise the following might happen:

------------[ cut here ]------------
WARNING: CPU: 14 PID: 2265 at .../arch/arm/kernel/insn.c:14 __arm_gen_branch+0x83/0x8c()
...
Hardware name: LSI Axxia AXM55XX
[<c0314a49>] (unwind_backtrace) from [<c03115e9>] (show_stack+0x11/0x14)
[<c03115e9>] (show_stack) from [<c0519f51>] (dump_stack+0x81/0xa8)
[<c0519f51>] (dump_stack) from [<c032185d>] (warn_slowpath_common+0x69/0x90)
[<c032185d>] (warn_slowpath_common) from [<c03218f3>] (warn_slowpath_null+0x17/0x1c)
[<c03218f3>] (warn_slowpath_null) from [<c03143cf>] (__arm_gen_branch+0x83/0x8c)
[<c03143cf>] (__arm_gen_branch) from [<c0314337>] (ftrace_make_nop+0xf/0x24)
[<c0314337>] (ftrace_make_nop) from [<c038ebcb>] (ftrace_process_locs+0x27b/0x3e8)
[<c038ebcb>] (ftrace_process_locs) from [<c0378d79>] (load_module+0x11e9/0x1a44)
[<c0378d79>] (load_module) from [<c037974d>] (SyS_finit_module+0x59/0x84)
[<c037974d>] (SyS_finit_module) from [<c030e981>] (ret_fast_syscall+0x1/0x18)
---[ end trace e1b64ced7a89adcc ]---
------------[ cut here ]------------
WARNING: CPU: 14 PID: 2265 at .../kernel/trace/ftrace.c:1979 ftrace_bug+0x1b1/0x234()
...
Hardware name: LSI Axxia AXM55XX
[<c0314a49>] (unwind_backtrace) from [<c03115e9>] (show_stack+0x11/0x14)
[<c03115e9>] (show_stack) from [<c0519f51>] (dump_stack+0x81/0xa8)
[<c0519f51>] (dump_stack) from [<c032185d>] (warn_slowpath_common+0x69/0x90)
[<c032185d>] (warn_slowpath_common) from [<c03218f3>] (warn_slowpath_null+0x17/0x1c)
[<c03218f3>] (warn_slowpath_null) from [<c038e87d>] (ftrace_bug+0x1b1/0x234)
[<c038e87d>] (ftrace_bug) from [<c038ebd5>] (ftrace_process_locs+0x285/0x3e8)
[<c038ebd5>] (ftrace_process_locs) from [<c0378d79>] (load_module+0x11e9/0x1a44)
[<c0378d79>] (load_module) from [<c037974d>] (SyS_finit_module+0x59/0x84)
[<c037974d>] (SyS_finit_module) from [<c030e981>] (ret_fast_syscall+0x1/0x18)
---[ end trace e1b64ced7a89adcd ]---
ftrace failed to modify [<e9ef7006>] 0xe9ef7006
actual: 02:f0:3b:fa
ftrace record flags: 0
(0) expected tramp: c0314265

Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: 9078/1: Add warn suppress parameter to arm_gen_branch_link()

commit 890cb057a46d323fd8c77ebecb6485476614cd21 upstream

Will be used in the following patch. No functional change.

Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: 9077/1: PLT: Move struct plt_entries definition to header

commit 4e271701c17dee70c6e1351c4d7d42e70405c6a9 upstream

No functional change, later it will be re-used in several files.

Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

apparmor: remove duplicate macro list_entry_is_head()

commit 9801ca279ad37f72f71234fa81722afd95a3f997 upstream.

Strangely I hadn't had noticed the existence of the list_entry_is_head()
in apparmor code when added the same one in the list.h.  Luckily it's
fully identical and didn't break builds.  In any case we don't need a
duplicate anymore, thus remove it from apparmor code.

Link: https://lkml.kernel.org/r/20201208100639.88182-1-andriy.shevchenko@linux.intel.com
Fixes: e130816164e244 ("include/linux/list.h: add a macro to test if entry is pointing to the head")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: John Johansen <john.johansen@canonical.com>
Cc: James Morris <jmorris@namei.org>
Cc: "Serge E . Hallyn " <serge@hallyn.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Nobuhiro Iwamatsu (CIP) <nobuhiro1.iwamatsu@toshiba.co.jp>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: Qualify enabling of swiotlb_init()

commit fcf044891c84e38fc90eb736b818781bccf94e38 upstream.

We do not need a SWIOTLB unless we have DRAM that is addressable beyond
the arm_dma_limit. Compare max_pfn with arm_dma_pfn_limit to determine
whether we do need a SWIOTLB to be initialized.

Fixes: ad3c7b18c5b3 ("arm: use swiotlb for bounce buffering on LPAE configs")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390/pci_mmio: fully validate the VMA before calling follow_pte()

commit a8b92b8c1eac8d655a97b1e90f4d83c25d9b9a18 upstream.

We should not walk/touch page tables outside of VMA boundaries when
holding only the mmap sem in read mode. Evil user space can modify the
VMA layout just before this function runs and e.g., trigger races with
page table removal code since commit dd2283f2605e ("mm: mmap: zap pages
with read mmap_sem in munmap").

find_vma() does not check if the address is >= the VMA start address;
use vma_lookup() instead.

Reviewed-by: Niklas Schnelle <schnelle@linux.ibm.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Fixes: dd2283f2605e ("mm: mmap: zap pages with read mmap_sem in munmap")
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

console: consume APC, DM, DCS

commit 3a2b2eb55681158d3e3ef464fbf47574cf0c517c upstream.

The Linux console's VT102 implementation already consumes OSC
("Operating System Command") sequences, probably because that's how
palette changes are transmitted.

In addition to OSC, there are three other major clases of ANSI control
strings: APC ("Application Program Command"), PM ("Privacy Message"),
and DCS ("Device Control String").  They are handled similarly to OSC in
terms of termination.

Source: vt100.net

Add three new enumerated states, one for each of these types.  All three
are handled the same way right now--they simply consume input until
terminated.  I hope to expand upon this firmament in the future.  Add
new predicate ansi_control_string(), returning true for any of these
states.  Replace explicit checks against ESosc with calls to this
function.  Transition to these states appropriately from the escape
initiation (ESesc) state.

This was motivated by the following Notcurses bugs:

 https://github.com/dankamongmen/notcurses/issues/2050
 https://github.com/dankamongmen/notcurses/issues/1828
 https://github.com/dankamongmen/notcurses/issues/2069

where standard VT sequences are not consumed by the Linux console.  It's
not necessary that the Linux console *support* these sequences, but it
ought *consume* these well-specified classes of sequences.

Tested by sending a variety of escape sequences to the console, and
verifying that they still worked, or were now properly consumed.
Verified that the escapes were properly terminated at a generic level.
Verified that the Notcurses tools continued to show expected output on
the Linux console, except now without escape bleedthrough.

Link: https://lore.kernel.org/lkml/YSydL0q8iaUfkphg@schwarzgerat.orthanc/
Signed-off-by: nick black <dankamongmen@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jiri Slaby <jirislaby@kernel.org>
Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: remember position in kvm->vcpus array

commit 8750e72a79dda2f665ce17b62049f4d62130d991 upstream.

Fetching an index for any vcpu in kvm->vcpus array by traversing
the entire array everytime is costly.
This patch remembers the position of each vcpu in kvm->vcpus array
by storing it in vcpus_idx under kvm_vcpu structure.

Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Nitesh Narayan Lal <nitesh@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
[borntraeger@de.ibm.com]: backport to 4.19 (also fits for 5.4)
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI/ACPI: Add Ampere Altra SOC MCFG quirk

commit 877c1a5f79c6984bbe3f2924234c08e2f4f1acd5 upstream.

Ampere Altra SOC supports only 32-bit ECAM reads.  Add an MCFG quirk for
the platform.

Link: https://lore.kernel.org/r/1596751055-12316-1-git-send-email-tuanphan@os.amperecomputing.com
Signed-off-by: Tuan Phan <tuanphan@os.amperecomputing.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
[ dannf: backport drops const qualifier from pci_32b_read_ops for
  consistency with the other quirks that weren't yet constified in v5.4 ]
Signed-off-by: dann frazier <dann.frazier@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI: aardvark: Fix reporting CRS value

commit 43f5c77bcbd27cce70bf33c2b86d6726ce95dd66 upstream.

Set CRSVIS flag in emulated root PCI bridge to indicate support for
Completion Retry Status.

Add check for CRSSVE flag from root PCI brige when issuing Configuration
Read Request via PIO to correctly returns fabricated CRS value as it is
required by PCIe spec.

Link: https://lore.kernel.org/r/20210722144041.12661-5-pali@kernel.org
Fixes: 8a3ebd8de328 ("PCI: aardvark: Implement emulated root PCI bridge config space")
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: stable@vger.kernel.org # e0d9d30b7354 ("PCI: pci-bridge-emul: Fix big-endian support")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI: pci-bridge-emul: Add PCIe Root Capabilities Register

commit e902bb7c24a7099d0eb0eb4cba06f2d91e9299f3 upstream.

The 16-bit Root Capabilities register is at offset 0x1e in the PCIe
Capability. Rename current 'rsvd' struct member to 'rootcap'.

Link: https://lore.kernel.org/r/20210722144041.12661-4-pali@kernel.org
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI: aardvark: Indicate error in 'val' when config read fails

commit b1bd5714472cc72e14409f5659b154c765a76c65 upstream.

Most callers of config read do not check for return value. But most of the
ones that do, checks for error indication in 'val' variable.

This patch updates error handling in advk_pcie_rd_conf() function. If PIO
transfer fails then 'val' variable is set to 0xffffffff which indicates
failture.

Link: https://lore.kernel.org/r/20200528162604.GA323482@bjorn-Precision-5520
Link: https://lore.kernel.org/r/20200601130315.18895-1-pali@kernel.org
Reported-by: Bjorn Helgaas <helgaas@kernel.org>
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI: pci-bridge-emul: Fix big-endian support

commit e0d9d30b73548fbfe5c024ed630169bdc9a08aee upstream.

Perform conversion to little-endian before every write to configuration
space and convert it back to CPU endianness on reads.

Additionally, initialise every multiple byte field of config space with
the cpu_to_le* macro, which is required since the structure describing
config space of emulated bridge assumes little-endian convention.

Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 5.4.148

Link: https://lore.kernel.org/r/20210920163931.123590023@linuxfoundation.org
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Tested-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Hulk Robot <hulkrobot@huawei.com>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390/bpf: Fix 64-bit subtraction of the -0x80000000 constant

commit 6e61dc9da0b7a0d91d57c2e20b5ea4fd2d4e7e53 upstream.

The JIT uses agfi for subtracting constants, but -(-0x80000000) cannot
be represented as a 32-bit signed binary integer. Fix by using algfi in
this particular case.

Reported-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Fixes: 054623105728 ("s390/bpf: Add s390x eBPF JIT compiler backend")
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390/bpf: Fix optimizing out zero-extensions

commit db7bee653859ef7179be933e7d1384644f795f26 upstream.

Currently the JIT completely removes things like `reg32 += 0`,
however, the BPF_ALU semantics requires the target register to be
zero-extended in such cases.

Fix by optimizing out only the arithmetic operation, but not the
subsequent zero-extension.

Reported-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Fixes: 054623105728 ("s390/bpf: Add s390x eBPF JIT compiler backend")
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: renesas: sh_eth: Fix freeing wrong tx descriptor

[ Upstream commit 0341d5e3d1ee2a36dd5a49b5bef2ce4ad1cfa6b4 ]

The cur_tx counter must be incremented after TACT bit of
txdesc->status was set. However, a CPU is possible to reorder
instructions and/or memory accesses between cur_tx and
txdesc->status. And then, if TX interrupt happened at such a
timing, the sh_eth_tx_free() may free the descriptor wrongly.
So, add wmb() before cur_tx++.
Otherwise NETDEV WATCHDOG timeout is possible to happen.

Fixes: 86a74ff21a7a ("net: sh_eth: add support for Renesas SuperH Ethernet")
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ip_gre: validate csum_start only on pull

[ Upstream commit 8a0ed250f911da31a2aef52101bc707846a800ff ]

The GRE tunnel device can pull existing outer headers in ipge_xmit.
This is a rare path, apparently unique to this device. The below
commit ensured that pulling does not move skb->data beyond csum_start.

But it has a false positive if ip_summed is not CHECKSUM_PARTIAL and
thus csum_start is irrelevant.

Refine to exclude this. At the same time simplify and strengthen the
test.

Simplify, by moving the check next to the offending pull, making it
more self documenting and removing an unnecessary branch from other
code paths.

Strengthen, by also ensuring that the transport header is correct and
therefore the inner headers will be after skb_reset_inner_headers.
The transport header is set to csum_start in skb_partial_csum_set.

Link: https://lore.kernel.org/netdev/YS+h%2FtqCJJiQei+W@shredder/
Fixes: 1d011c4803c7 ("ip_gre: add validation for csum_start")
Reported-by: Ido Schimmel <idosch@idosch.org>
Suggested-by: Alexander Duyck <alexander.duyck@gmail.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

qlcnic: Remove redundant unlock in qlcnic_pinit_from_rom

[ Upstream commit 9ddbc2a00d7f63fa9748f4278643193dac985f2d ]

Previous commit 68233c583ab4 removes the qlcnic_rom_lock()
in qlcnic_pinit_from_rom(), but remains its corresponding
unlock function, which is odd. I'm not very sure whether the
lock is missing, or the unlock is redundant. This bug is
suggested by a static analysis tool, please advise.

Fixes: 68233c583ab4 ("qlcnic: updated reset sequence")
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

fq_codel: reject silly quantum parameters

[ Upstream commit c7c5e6ff533fe1f9afef7d2fa46678987a1335a7 ]

syzbot found that forcing a big quantum attribute would crash hosts fast,
essentially using this:

tc qd replace dev eth0 root fq_codel quantum 4294967295

This is because fq_codel_dequeue() would have to loop
~2^31 times in :

if (flow->deficit <= 0) {
flow->deficit += q->quantum;
list_move_tail(&flow->flowchain, &q->old_flows);
goto begin;
}

SFQ max quantum is 2^19 (half a megabyte)
Lets adopt a max quantum of one megabyte for FQ_CODEL.

Fixes: 4b549a2ef4be ("fq_codel: Fair Queue Codel AQM")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfilter: socket: icmp6: fix use-after-scope

[ Upstream commit 730affed24bffcd1eebd5903171960f5ff9f1f22 ]

Bug reported by KASAN:

BUG: KASAN: use-after-scope in inet6_ehashfn (net/ipv6/inet6_hashtables.c:40)
Call Trace:
(...)
inet6_ehashfn (net/ipv6/inet6_hashtables.c:40)
(...)
nf_sk_lookup_slow_v6 (net/ipv6/netfilter/nf_socket_ipv6.c:91
net/ipv6/netfilter/nf_socket_ipv6.c:146)

It seems that this bug has already been fixed by Eric Dumazet in the
past in:
commit 78296c97ca1f ("netfilter: xt_socket: fix a stack corruption bug")

But a variant of the same issue has been introduced in
commit d64d80a2cde9 ("netfilter: x_tables: don't extract flow keys on early demuxed sks in socket match")

`daddr` and `saddr` potentially hold a reference to ipv6_var that is no
longer in scope when the call to `nf_socket_get_sock_v6` is made.

Fixes: d64d80a2cde9 ("netfilter: x_tables: don't extract flow keys on early demuxed sks in socket match")
Acked-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Benjamin Hesmans <benjamin.hesmans@tessares.net>
Reviewed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: dsa: b53: Fix calculating number of switch ports

[ Upstream commit cdb067d31c0fe4cce98b9d15f1f2ef525acaa094 ]

It isn't true that CPU port is always the last one. Switches BCM5301x
have 9 ports (port 6 being inactive) and they use port 5 as CPU by
default (depending on design some other may be CPU ports too).

A more reliable way of determining number of ports is to check for the
last set bit in the "enabled_ports" bitfield.

This fixes b53 internal state, it will allow providing accurate info to
the DSA and is required to fix BCM5301x support.

Fixes: 967dd82ffc52 ("net: dsa: b53: Add support for Broadcom RoboSwitch")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf unwind: Do not overwrite FEATURE_CHECK_LDFLAGS-libunwind-{x86,aarch64}

[ Upstream commit cdf32b44678c382a31dc183d9a767306915cda7b ]

When setting LIBUNWIND_DIR, we first set

 FEATURE_CHECK_LDFLAGS-libunwind-{aarch64,x86} = -L$(LIBUNWIND_DIR)/lib.

<committer note>
This happens a bit before, the overwritting, in:

  libunwind_arch_set_flags = $(eval $(libunwind_arch_set_flags_code))
  define libunwind_arch_set_flags_code
    FEATURE_CHECK_CFLAGS-libunwind-$(1)  = -I$(LIBUNWIND_DIR)/include
    FEATURE_CHECK_LDFLAGS-libunwind-$(1) = -L$(LIBUNWIND_DIR)/lib
  endef

  ifdef LIBUNWIND_DIR
    LIBUNWIND_CFLAGS  = -I$(LIBUNWIND_DIR)/include
    LIBUNWIND_LDFLAGS = -L$(LIBUNWIND_DIR)/lib
    LIBUNWIND_ARCHS = x86 x86_64 arm aarch64 debug-frame-arm debug-frame-aarch64
    $(foreach libunwind_arch,$(LIBUNWIND_ARCHS),$(call libunwind_arch_set_flags,$(libunwind_arch)))
  endif

Look at that 'foreach' on all the LIBUNWIND_ARCHS.
</>

After commit 5c4d7c82c0dc ("perf unwind: Do not put libunwind-{x86,aarch64}
in FEATURE_TESTS_BASIC"), FEATURE_CHECK_LDFLAGS-libunwind-{x86,aarch64} is
overwritten. As a result, the remote libunwind libraries cannot be searched
from $(LIBUNWIND_DIR)/lib directory during feature check tests. Fix it with
variable appending.

Before this patch:

  perf$ make VF=1 LIBUNWIND_DIR=/opt/libunwind_aarch64
   BUILD:   Doing 'make -j16' parallel build
  <SNIP>
  ...
  ...                    libopencsd: [ OFF ]
  ...                 libunwind-x86: [ OFF ]
  ...              libunwind-x86_64: [ OFF ]
  ...                 libunwind-arm: [ OFF ]
  ...             libunwind-aarch64: [ OFF ]
  ...         libunwind-debug-frame: [ OFF ]
  ...     libunwind-debug-frame-arm: [ OFF ]
  ... libunwind-debug-frame-aarch64: [ OFF ]
  ...                           cxx: [ OFF ]
  <SNIP>

  perf$ cat ../build/feature/test-libunwind-aarch64.make.output
  /usr/bin/ld: cannot find -lunwind-aarch64
  /usr/bin/ld: cannot find -lunwind-aarch64
  collect2: error: ld returned 1 exit status

After this patch:

  perf$ make VF=1 LIBUNWIND_DIR=/opt/libunwind_aarch64
   BUILD:   Doing 'make -j16' parallel build
  <SNIP>
  ...                    libopencsd: [ OFF ]
  ...                 libunwind-x86: [ OFF ]
  ...              libunwind-x86_64: [ OFF ]
  ...                 libunwind-arm: [ OFF ]
  ...             libunwind-aarch64: [ on  ]
  ...         libunwind-debug-frame: [ OFF ]
  ...     libunwind-debug-frame-arm: [ OFF ]
  ... libunwind-debug-frame-aarch64: [ OFF ]
  ...                           cxx: [ OFF ]
  <SNIP>

  perf$ cat ../build/feature/test-libunwind-aarch64.make.output

  perf$ ldd ./perf
        linux-vdso.so.1 (0x00007ffdf07da000)
        libpthread.so.0 => /lib/x86_64-linux-gnu/libpthread.so.0 (0x00007f30953dc000)
        librt.so.1 => /lib/x86_64-linux-gnu/librt.so.1 (0x00007f30951d4000)
        libm.so.6 => /lib/x86_64-linux-gnu/libm.so.6 (0x00007f3094e36000)
        libdl.so.2 => /lib/x86_64-linux-gnu/libdl.so.2 (0x00007f3094c32000)
        libelf.so.1 => /usr/lib/x86_64-linux-gnu/libelf.so.1 (0x00007f3094a18000)
        libdw.so.1 => /usr/lib/x86_64-linux-gnu/libdw.so.1 (0x00007f30947cc000)
        libunwind-x86_64.so.8 => /usr/lib/x86_64-linux-gnu/libunwind-x86_64.so.8 (0x00007f30945ad000)
        libunwind.so.8 => /usr/lib/x86_64-linux-gnu/libunwind.so.8 (0x00007f3094392000)
        liblzma.so.5 => /lib/x86_64-linux-gnu/liblzma.so.5 (0x00007f309416c000)
        libunwind-aarch64.so.8 => not found
        libslang.so.2 => /lib/x86_64-linux-gnu/libslang.so.2 (0x00007f3093c8a000)
        libpython2.7.so.1.0 => /usr/local/lib/libpython2.7.so.1.0 (0x00007f309386b000)
        libz.so.1 => /lib/x86_64-linux-gnu/libz.so.1 (0x00007f309364e000)
        libnuma.so.1 => /usr/lib/x86_64-linux-gnu/libnuma.so.1 (0x00007f3093443000)
        libc.so.6 => /lib/x86_64-linux-gnu/libc.so.6 (0x00007f3093052000)
        /lib64/ld-linux-x86-64.so.2 (0x00007f3096097000)
        libbz2.so.1.0 => /lib/x86_64-linux-gnu/libbz2.so.1.0 (0x00007f3092e42000)
        libutil.so.1 => /lib/x86_64-linux-gnu/libutil.so.1 (0x00007f3092c3f000)

Fixes: 5c4d7c82c0dceccf ("perf unwind: Do not put libunwind-{x86,aarch64} in FEATURE_TESTS_BASIC")
Signed-off-by: Li Huafei <lihuafei1@huawei.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Zhang Jinhao <zhangjinhao2@huawei.com>
Link: http://lore.kernel.org/lkml/20210823134340.60955-1-lihuafei1@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARC: export clear_user_page() for modules

[ Upstream commit 6b5ff0405e4190f23780362ea324b250bc495683 ]

0day bot reports a build error:
  ERROR: modpost: "clear_user_page" [drivers/media/v4l2-core/videobuf-dma-sg.ko] undefined!
so export it in arch/arc/ to fix the build error.

In most ARCHes, clear_user_page() is a macro. OTOH, in a few
ARCHes it is a function and needs to be exported.
PowerPC exported it in 2004. It looks like nds32 and nios2
still need to have it exported.

Fixes: 4102b53392d63 ("ARC: [mm] Aliasing VIPT dcache support 2/4")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: linux-snps-arc@lists.infradead.org
Signed-off-by: Vineet Gupta <vgupta@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mtd: rawnand: cafe: Fix a resource leak in the error handling path of 'cafe_nand_probe()'

[ Upstream commit 6b430c7595e4eb95fae8fb54adc3c3ce002e75ae ]

A successful 'init_rs_non_canonical()' call should be balanced by a
corresponding 'free_rs()' call in the error handling path of the probe, as
already done in the remove function.

Update the error handling path accordingly.

Fixes: 8c61b7a7f4d4 ("[MTD] [NAND] Use rslib for CAFÉ ECC")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/fd313d3fb787458bcc73189e349f481133a2cdc9.1629532640.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Sasha Levin <sashal@kernel.org>

PCI: Sync __pci_register_driver() stub for CONFIG_PCI=n

[ Upstream commit 817f9916a6e96ae43acdd4e75459ef4f92d96eb1 ]

The CONFIG_PCI=y case got a new parameter long time ago.  Sync the stub as
well.

[bhelgaas: add parameter names]
Fixes: 725522b5453d ("PCI: add the sysfs driver name to all modules")
Link: https://lore.kernel.org/r/20210813153619.89574-1-andriy.shevchenko@linux.intel.com
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

KVM: arm64: Handle PSCI resets before userspace touches vCPU state

[ Upstream commit 6826c6849b46aaa91300201213701eb861af4ba0 ]

The CPU_ON PSCI call takes a payload that KVM uses to configure a
destination vCPU to run. This payload is non-architectural state and not
exposed through any existing UAPI. Effectively, we have a race between
CPU_ON and userspace saving/restoring a guest: if the target vCPU isn't
ran again before the VMM saves its state, the requested PC and context
ID are lost. When restored, the target vCPU will be runnable and start
executing at its old PC.

We can avoid this race by making sure the reset payload is serviced
before userspace can access a vCPU's state.

Fixes: 358b28f09f0a ("arm/arm64: KVM: Allow a VCPU to fully reset itself")
Signed-off-by: Oliver Upton <oupton@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210818202133.1106786-3-oupton@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

mfd: tqmx86: Clear GPIO IRQ resource when no IRQ is set

[ Upstream commit a946506c48f3bd09363c9d2b0a178e55733bcbb6 ]

The driver was registering IRQ 0 when no IRQ was set. This leads to
warnings with newer kernels.

Clear the resource flags, so no resource is registered at all in this
case.

Fixes: 2f17dd34ffed ("mfd: tqmx86: IO controller with I2C, Wachdog and GPIO")
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

PCI: Fix pci_dev_str_match_path() alloc while atomic bug

[ Upstream commit 7eb6ea4148579b85540a41d57bcec315b8af8ff8 ]

pci_dev_str_match_path() is often called with a spinlock held so the
allocation has to be atomic.  The call tree is:

  pci_specified_resource_alignment() <-- takes spin_lock();
    pci_dev_str_match()
      pci_dev_str_match_path()

Fixes: 45db33709ccc ("PCI: Allow specifying devices using a base bus and path of devfns")
Link: https://lore.kernel.org/r/20210812070004.GC31863@kili
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mfd: axp20x: Update AXP288 volatile ranges

[ Upstream commit f949a9ebce7a18005266b859a17f10c891bb13d7 ]

On Cherry Trail devices with an AXP288 PMIC the external SD-card slot
used the AXP's DLDO2 as card-voltage and either DLDO3 or GPIO1LDO
(GPIO1 pin in low noise LDO mode) as signal-voltage.

These regulators are turned on/off and in case of the signal-voltage
also have their output-voltage changed by the _PS0 and _PS3 power-
management ACPI methods on the MMC-controllers ACPI fwnode as well as
by the _DSM ACPI method for changing the signal voltage.

The AML code implementing these methods is directly accessing the
PMIC through ACPI I2C OpRegion accesses, instead of using the special
PMIC OpRegion handled by drivers/acpi/pmic/intel_pmic_xpower.c .

This means that the contents of the involved PMIC registers can change
without the change being made through the regmap interface, so regmap
should not cache the contents of these registers.

Mark the regulator power on/off, the regulator voltage control and the
GPIO1 control registers as volatile, to avoid regmap caching them.

Specifically this fixes an issue on some models where the i915 driver
toggles another LDO using the same on/off register on/off through
MIPI sequences (through intel_soc_pmic_exec_mipi_pmic_seq_element())
which then writes back a cached on/off register-value where the
card-voltage is off causing the external sdcard slot to stop working
when the screen goes blank, or comes back on again.

The regulator register-range now marked volatile also includes the
buck regulator control registers. This is done on purpose these are
normally not touched by the AML code, but they are updated directly
by the SoC's PUNIT which means that they may also change without going
through regmap.

Note the AXP288 PMIC is only used on Bay- and Cherry-Trail platforms,
so even though this is an ACPI specific problem there is no need to
make the new volatile ranges conditional since these platforms always
use ACPI.

Fixes: dc91c3b6fe66 ("mfd: axp20x: Mark AXP20X_VBUS_IPSOUT_MGMT as volatile")
Fixes: cd53216625a0 ("mfd: axp20x: Fix axp288 volatile ranges")
Reported-and-tested-by: Clamshell <clamfly@163.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

NTB: perf: Fix an error code in perf_setup_inbuf()

[ Upstream commit 0097ae5f7af5684f961a5f803ff7ad3e6f933668 ]

When the function IS_ALIGNED() returns false, the value of ret is 0.
So, we set ret to -EINVAL to indicate this error.

Clean up smatch warning:
drivers/ntb/test/ntb_perf.c:602 perf_setup_inbuf() warn: missing error
code 'ret'.

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Signed-off-by: Sasha Levin <sashal@kernel.org>

NTB: Fix an error code in ntb_msit_probe()

[ Upstream commit 319f83ac98d7afaabab84ce5281a819a358b9895 ]

When the value of nm->isr_ctx is false, the value of ret is 0.
So, we set ret to -ENOMEM to indicate this error.

Clean up smatch warning:
drivers/ntb/test/ntb_msi_test.c:373 ntb_msit_probe() warn: missing
error code 'ret'.

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ethtool: Fix an error code in cxgb2.c

[ Upstream commit 7db8263a12155c7ae4ad97e850f1e499c73765fc ]

When adapter->registered_device_map is NULL, the value of err is
uncertain, we set err to -EINVAL to avoid ambiguity.

Clean up smatch warning:
drivers/net/ethernet/chelsio/cxgb/cxgb2.c:1114 init_one() warn: missing
error code 'err'

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

PCI: ibmphp: Fix double unmap of io_mem

[ Upstream commit faa2e05ad0dccf37f995bcfbb8d1980d66c02c11 ]

ebda_rsrc_controller() calls iounmap(io_mem) on the error path. Its caller,
ibmphp_access_ebda(), also calls iounmap(io_mem) on good and error paths.

Remove the iounmap(io_mem) invocation from ebda_rsrc_controller().

[bhelgaas: remove item from TODO]
Link: https://lore.kernel.org/r/20210818165751.591185-1-os.vaslot@gmail.com
Signed-off-by: Vishal Aslot <os.vaslot@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

block, bfq: honor already-setup queue merges

[ Upstream commit 2d52c58b9c9bdae0ca3df6a1eab5745ab3f7d80b ]

The function bfq_setup_merge prepares the merging between two
bfq_queues, say bfqq and new_bfqq. To this goal, it assigns
bfqq->new_bfqq = new_bfqq. Then, each time some I/O for bfqq arrives,
the process that generated that I/O is disassociated from bfqq and
associated with new_bfqq (merging is actually a redirection). In this
respect, bfq_setup_merge increases new_bfqq->ref in advance, adding
the number of processes that are expected to be associated with
new_bfqq.

Unfortunately, the stable-merging mechanism interferes with this
setup. After bfqq->new_bfqq has been set by bfq_setup_merge, and
before all the expected processes have been associated with
bfqq->new_bfqq, bfqq may happen to be stably merged with a different
queue than the current bfqq->new_bfqq. In this case, bfqq->new_bfqq
gets changed. So, some of the processes that have been already
accounted for in the ref counter of the previous new_bfqq will not be
associated with that queue.  This creates an unbalance, because those
references will never be decremented.

This commit fixes this issue by reestablishing the previous, natural
behaviour: once bfqq->new_bfqq has been set, it will not be changed
until all expected redirections have occurred.

Signed-off-by: Davide Zini <davidezini2@gmail.com>
Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Link: https://lore.kernel.org/r/20210802141352.74353-2-paolo.valente@linaro.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: usb: cdc_mbim: avoid altsetting toggling for Telit LN920

[ Upstream commit aabbdc67f3485b5db27ab4eba01e5fbf1ffea62c ]

Add quirk CDC_MBIM_FLAG_AVOID_ALTSETTING_TOGGLE for Telit LN920
0x1061 composition in order to avoid bind error.

Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Set fc_nlinfo in nh_create_ipv4, nh_create_ipv6

[ Upstream commit 9aca491e0dccf8a9d84a5b478e5eee3c6ea7803b ]

This patch fixes kernel NULL pointer dereference when creating nexthop
which is bound with SRv6 decapsulation. In the creation of nexthop,
__seg6_end_dt_vrf_build is called. __seg6_end_dt_vrf_build expects
fc_lninfo in fib6_config is set correctly, but it isn't set in
nh_create_ipv6, which causes kernel crash.

Here is steps to reproduce kernel crash:

1. modprobe vrf
2. ip -6 nexthop add encap seg6local action End.DT4 vrftable 1 dev eth0

We got the following message:

[  901.370336] BUG: kernel NULL pointer dereference, address: 0000000000000ba0
[  901.371658] #PF: supervisor read access in kernel mode
[  901.372672] #PF: error_code(0x0000) - not-present page
[  901.373672] PGD 0 P4D 0
[  901.374248] Oops: 0000 [#1] SMP PTI
[  901.374944] CPU: 0 PID: 8593 Comm: ip Not tainted 5.14-051400-generic #202108310811-Ubuntu
[  901.376404] Hardware name: Red Hat KVM, BIOS 1.11.1-4.module_el8.2.0+320+13f867d7 04/01/2014
[  901.377907] RIP: 0010:vrf_ifindex_lookup_by_table_id+0x19/0x90 [vrf]
[  901.379182] Code: c1 e9 72 ff ff ff e8 96 49 01 c2 66 0f 1f 44 00 00 0f 1f 44 00 00 55 48 89 e5 41 56 41 55 41 89 f5 41 54 53 8b 05 47 4c 00 00 <48> 8b 97 a0 0b 00 00 48 8b 1c c2 e8 57 27 53 c1 4c 8d a3 88 00 00
[  901.382652] RSP: 0018:ffffbf2d02043590 EFLAGS: 00010282
[  901.383746] RAX: 000000000000000b RBX: ffff990808255e70 RCX: ffffbf2d02043aa8
[  901.385436] RDX: 0000000000000001 RSI: 0000000000000001 RDI: 0000000000000000
[  901.386924] RBP: ffffbf2d020435b0 R08: 00000000000000c0 R09: ffff990808255e40
[  901.388537] R10: ffffffff83b08c90 R11: 0000000000000009 R12: 0000000000000000
[  901.389937] R13: 0000000000000001 R14: 0000000000000000 R15: 000000000000000b
[  901.391226] FS:  00007fe49381f740(0000) GS:ffff99087dc00000(0000) knlGS:0000000000000000
[  901.392737] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  901.393803] CR2: 0000000000000ba0 CR3: 000000000e3e8003 CR4: 0000000000770ef0
[  901.395122] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  901.396496] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[  901.397833] PKRU: 55555554
[  901.398578] Call Trace:
[  901.399144]  l3mdev_ifindex_lookup_by_table_id+0x3b/0x70
[  901.400179]  __seg6_end_dt_vrf_build+0x34/0xd0
[  901.401067]  seg6_end_dt4_build+0x16/0x20
[  901.401904]  seg6_local_build_state+0x271/0x430
[  901.402797]  lwtunnel_build_state+0x81/0x130
[  901.403645]  fib_nh_common_init+0x82/0x100
[  901.404465]  ? sock_def_readable+0x4b/0x80
[  901.405285]  fib6_nh_init+0x115/0x7c0
[  901.406033]  nh_create_ipv6.isra.0+0xe1/0x140
[  901.406932]  rtm_new_nexthop+0x3b7/0xeb0
[  901.407828]  rtnetlink_rcv_msg+0x152/0x3a0
[  901.408663]  ? rtnl_calcit.isra.0+0x130/0x130
[  901.409535]  netlink_rcv_skb+0x55/0x100
[  901.410319]  rtnetlink_rcv+0x15/0x20
[  901.411026]  netlink_unicast+0x1a8/0x250
[  901.411813]  netlink_sendmsg+0x238/0x470
[  901.412602]  ? _copy_from_user+0x2b/0x60
[  901.413394]  sock_sendmsg+0x65/0x70
[  901.414112]  ____sys_sendmsg+0x218/0x290
[  901.414929]  ? copy_msghdr_from_user+0x5c/0x90
[  901.415814]  ___sys_sendmsg+0x81/0xc0
[  901.416559]  ? fsnotify_destroy_marks+0x27/0xf0
[  901.417447]  ? call_rcu+0xa4/0x230
[  901.418153]  ? kmem_cache_free+0x23f/0x410
[  901.418972]  ? dentry_free+0x37/0x70
[  901.419705]  ? mntput_no_expire+0x4c/0x260
[  901.420574]  __sys_sendmsg+0x62/0xb0
[  901.421297]  __x64_sys_sendmsg+0x1f/0x30
[  901.422057]  do_syscall_64+0x5c/0xc0
[  901.422756]  ? syscall_exit_to_user_mode+0x27/0x50
[  901.423675]  ? __x64_sys_close+0x12/0x40
[  901.424462]  ? do_syscall_64+0x69/0xc0
[  901.425219]  ? irqentry_exit_to_user_mode+0x9/0x20
[  901.426149]  ? irqentry_exit+0x19/0x30
[  901.426901]  ? exc_page_fault+0x89/0x160
[  901.427709]  ? asm_exc_page_fault+0x8/0x30
[  901.428536]  entry_SYSCALL_64_after_hwframe+0x44/0xae
[  901.429514] RIP: 0033:0x7fe493945747
[  901.430248] Code: 64 89 02 48 c7 c0 ff ff ff ff eb bb 0f 1f 80 00 00 00 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 89 54 24 1c 48 89 74 24 10
[  901.433549] RSP: 002b:00007ffe9932cf68 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
[  901.434981] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007fe493945747
[  901.436303] RDX: 0000000000000000 RSI: 00007ffe9932cfe0 RDI: 0000000000000003
[  901.437607] RBP: 00000000613053f7 R08: 0000000000000001 R09: 00007ffe9932d07c
[  901.438990] R10: 000055f4a903a010 R11: 0000000000000246 R12: 0000000000000001
[  901.440340] R13: 0000000000000001 R14: 000055f4a802b163 R15: 000055f4a8042020
[  901.441630] Modules linked in: vrf nls_utf8 isofs nls_iso8859_1 dm_multipath scsi_dh_rdac scsi_dh_emc scsi_dh_alua intel_rapl_msr intel_rapl_common isst_if_mbox_msr isst_if_common nfit rapl input_leds joydev serio_raw qemu_fw_cfg mac_hid sch_fq_codel drm virtio_rng ip_tables x_tables autofs4 btrfs blake2b_generic zstd_compress raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor raid6_pq libcrc32c raid1 raid0 multipath linear crct10dif_pclmul crc32_pclmul ghash_clmulni_intel aesni_intel crypto_simd virtio_net net_failover cryptd psmouse virtio_blk failover i2c_piix4 pata_acpi floppy
[  901.450808] CR2: 0000000000000ba0
[  901.451514] ---[ end trace c27b934b99ade304 ]---
[  901.452403] RIP: 0010:vrf_ifindex_lookup_by_table_id+0x19/0x90 [vrf]
[  901.453626] Code: c1 e9 72 ff ff ff e8 96 49 01 c2 66 0f 1f 44 00 00 0f 1f 44 00 00 55 48 89 e5 41 56 41 55 41 89 f5 41 54 53 8b 05 47 4c 00 00 <48> 8b 97 a0 0b 00 00 48 8b 1c c2 e8 57 27 53 c1 4c 8d a3 88 00 00
[  901.456910] RSP: 0018:ffffbf2d02043590 EFLAGS: 00010282
[  901.457912] RAX: 000000000000000b RBX: ffff990808255e70 RCX: ffffbf2d02043aa8
[  901.459238] RDX: 0000000000000001 RSI: 0000000000000001 RDI: 0000000000000000
[  901.460552] RBP: ffffbf2d020435b0 R08: 00000000000000c0 R09: ffff990808255e40
[  901.461882] R10: ffffffff83b08c90 R11: 0000000000000009 R12: 0000000000000000
[  901.463208] R13: 0000000000000001 R14: 0000000000000000 R15: 000000000000000b
[  901.464529] FS:  00007fe49381f740(0000) GS:ffff99087dc00000(0000) knlGS:0000000000000000
[  901.466058] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  901.467189] CR2: 0000000000000ba0 CR3: 000000000e3e8003 CR4: 0000000000770ef0
[  901.468515] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  901.469858] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[  901.471139] PKRU: 55555554

Signed-off-by: Ryoga Saito <contact@proelbtn.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

PCI: Add ACS quirks for Cavium multi-function devices

[ Upstream commit 32837d8a8f63eb95dcb9cd005524a27f06478832 ]

Some Cavium endpoints are implemented as multi-function devices without ACS
capability, but they actually don't support peer-to-peer transactions.

Add ACS quirks to declare DMA isolation for the following devices:

  - BGX device found on Octeon-TX (8xxx)
  - CGX device found on Octeon-TX2 (9xxx)
  - RPM device found on Octeon-TX3 (10xxx)

Link: https://lore.kernel.org/r/20210810122425.1115156-1-george.cherian@marvell.com
Signed-off-by: George Cherian <george.cherian@marvell.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tracing/probes: Reject events which have the same name of existing one

[ Upstream commit 8e242060c6a4947e8ae7d29794af6a581db08841 ]

Since kprobe_events and uprobe_events only check whether the
other same-type probe event has the same name or not, if the
user gives the same name of the existing tracepoint event (or
the other type of probe events), it silently fails to create
the tracefs entry (but registered.) as below.

/sys/kernel/tracing # ls events/task/task_rename
enable   filter   format   hist     id       trigger
/sys/kernel/tracing # echo p:task/task_rename vfs_read >> kprobe_events
[  113.048508] Could not create tracefs 'task_rename' directory
/sys/kernel/tracing # cat kprobe_events
p:task/task_rename vfs_read

To fix this issue, check whether the existing events have the
same name or not in trace_probe_register_event_call(). If exists,
it rejects to register the new event.

Link: https://lkml.kernel.org/r/162936876189.187130.17558311387542061930.stgit@devnote2
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mfd: Don't use irq_create_mapping() to resolve a mapping

[ Upstream commit 9ff80e2de36d0554e3a6da18a171719fe8663c17 ]

Although irq_create_mapping() is able to deal with duplicate
mappings, it really isn't supposed to be a substitute for
irq_find_mapping(), and can result in allocations that take place
in atomic context if the mapping didn't exist.

Fix the handful of MFD drivers that use irq_create_mapping() in
interrupt context by using irq_find_mapping() instead.

Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

fuse: fix use after free in fuse_read_interrupt()

[ Upstream commit e1e71c168813564be0f6ea3d6740a059ca42d177 ]

There is a potential race between fuse_read_interrupt() and
fuse_request_end().

TASK1
  in fuse_read_interrupt(): delete req->intr_entry (while holding
  fiq->lock)

TASK2
  in fuse_request_end(): req->intr_entry is empty -> skip fiq->lock
  wake up TASK3

TASK3
  request is freed

TASK1
  in fuse_read_interrupt(): dereference req->in.h.unique ***BAM***

Fix by always grabbing fiq->lock if the request was ever interrupted
(FR_INTERRUPTED set) thereby serializing with concurrent
fuse_read_interrupt() calls.

FR_INTERRUPTED is set before the request is queued on fiq->interrupts.
Dequeing the request is done with list_del_init() but FR_INTERRUPTED is not
cleared in this case.

Reported-by: lijiazi <lijiazi@xiaomi.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

PCI: Add ACS quirks for NXP LX2xx0 and LX2xx2 platforms

[ Upstream commit d08c8b855140e9f5240b3ffd1b8b9d435675e281 ]

Root Ports in NXP LX2xx0 and LX2xx2, where each Root Port is a Root Complex
with unique segment numbers, do provide isolation features to disable peer
transactions and validate bus numbers in requests, but do not provide an
actual PCIe ACS capability.

Add ACS quirks for NXP LX2xx0 A/C/E/N and LX2xx2 A/C/E/N platforms.

  LX2xx0A : without security features + CAN-FD
    LX2160A (0x8d81) - 16 cores
    LX2120A (0x8da1) - 12 cores
    LX2080A (0x8d83) -  8 cores

  LX2xx0C : security features + CAN-FD
    LX2160C (0x8d80) - 16 cores
    LX2120C (0x8da0) - 12 cores
    LX2080C (0x8d82) -  8 cores

  LX2xx0E : security features + CAN
    LX2160E (0x8d90) - 16 cores
    LX2120E (0x8db0) - 12 cores
    LX2080E (0x8d92) -  8 cores

  LX2xx0N : without security features + CAN
    LX2160N (0x8d91) - 16 cores
    LX2120N (0x8db1) - 12 cores
    LX2080N (0x8d93) -  8 cores

  LX2xx2A : without security features + CAN-FD
    LX2162A (0x8d89) - 16 cores
    LX2122A (0x8da9) - 12 cores
    LX2082A (0x8d8b) -  8 cores

  LX2xx2C : security features + CAN-FD
    LX2162C (0x8d88) - 16 cores
    LX2122C (0x8da8) - 12 cores
    LX2082C (0x8d8a) -  8 cores

  LX2xx2E : security features + CAN
    LX2162E (0x8d98) - 16 cores
    LX2122E (0x8db8) - 12 cores
    LX2082E (0x8d9a) -  8 cores

  LX2xx2N : without security features + CAN
    LX2162N (0x8d99) - 16 cores
    LX2122N (0x8db9) - 12 cores
    LX2082N (0x8d9b) -  8 cores

[bhelgaas: put PCI_VENDOR_ID_NXP definition next to PCI_VENDOR_ID_FREESCALE
as a clue that they share the same Device ID namespace]
Link: https://lore.kernel.org/r/20210729121747.1823086-1-wasim.khan@oss.nxp.com
Link: https://lore.kernel.org/r/20210803180021.3252886-1-wasim.khan@oss.nxp.com
Signed-off-by: Wasim Khan <wasim.khan@nxp.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mfd: db8500-prcmu: Adjust map to reality

[ Upstream commit ec343111c056ec3847800302f6dbc57281f833fa ]

These are the actual frequencies reported by the PLL, so let's
report these. The roundoffs are inappropriate, we should round
to the frequency that the clock will later report.

Drop some whitespace at the same time.

Cc: phone-devel@vger.kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dt-bindings: mtd: gpmc: Fix the ECC bytes vs. OOB bytes equation

[ Upstream commit 778cb8e39f6ec252be50fc3850d66f3dcbd5dd5a ]

"PAGESIZE / 512" is the number of ECC chunks.
"ECC_BYTES" is the number of bytes needed to store a single ECC code.
"2" is the space reserved by the bad block marker.

"2 + (PAGESIZE / 512) * ECC_BYTES" should of course be lower or equal
than the total number of OOB bytes, otherwise it won't fit.

Fix the equation by substituting s/>=/<=/.

Suggested-by: Ryan J. Barnett <ryan.barnett@collins.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/linux-mtd/20210610143945.3504781-1-miquel.raynal@bootlin.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

mm/memory_hotplug: use "unsigned long" for PFN in zone_for_pfn_range()

commit 7cf209ba8a86410939a24cb1aeb279479a7e0ca6 upstream.

Patch series "mm/memory_hotplug: preparatory patches for new online policy and memory"

These are all cleanups and one fix previously sent as part of [1]:
[PATCH v1 00/12] mm/memory_hotplug: "auto-movable" online policy and memory
groups.

These patches make sense even without the other series, therefore I pulled
them out to make the other series easier to digest.

[1] https://lkml.kernel.org/r/20210607195430.48228-1-david@redhat.com

This patch (of 4):

Checkpatch complained on a follow-up patch that we are using "unsigned"
here, which defaults to "unsigned int" and checkpatch is correct.

As we will search for a fitting zone using the wrong pfn, we might end
up onlining memory to one of the special kernel zones, such as ZONE_DMA,
which can end badly as the onlined memory does not satisfy properties of
these zones.

Use "unsigned long" instead, just as we do in other places when handling
PFNs.  This can bite us once we have physical addresses in the range of
multiple TB.

Link: https://lkml.kernel.org/r/20210712124052.26491-2-david@redhat.com
Fixes: e5e689302633 ("mm, memory_hotplug: display allowed zones in the preferred ordering")
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta@ionos.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: David Hildenbrand <david@redhat.com>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: Wei Yang <richard.weiyang@linux.alibaba.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Len Brown <lenb@kernel.org>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: virtualization@lists.linux-foundation.org
Cc: Andy Lutomirski <luto@kernel.org>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com>
Cc: Anton Blanchard <anton@ozlabs.org>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Baoquan He <bhe@redhat.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Christophe Leroy <christophe.leroy@c-s.fr>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jia He <justin.he@arm.com>
Cc: Joe Perches <joe@perches.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Laurent Dufour <ldufour@linux.ibm.com>
Cc: Michel Lespinasse <michel@lespinasse.org>
Cc: Nathan Lynch <nathanl@linux.ibm.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Pierre Morel <pmorel@linux.ibm.com>
Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>
Cc: Rich Felker <dalias@libc.org>
Cc: Scott Cheloha <cheloha@linux.ibm.com>
Cc: Sergei Trofimovich <slyfox@gentoo.org>
Cc: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: hns3: fix the timing issue of VF clearing interrupt sources

commit 427900d27d86b820c559037a984bd403f910860f upstream.

Currently, the VF does not clear the interrupt source immediately after
receiving the interrupt. As a result, if the second interrupt task is
triggered when processing the first interrupt task, clearing the
interrupt source before exiting will clear the interrupt sources of the
two tasks at the same time. As a result, no interrupt is triggered for
the second task. The VF detects the missed message only when the next
interrupt is generated.

Clearing it immediately after executing check_evt_cause ensures that:
1. Even if two interrupt tasks are triggered at the same time, they can
be processed.
2. If the second task is triggered during the processing of the first
task and the interrupt source is not cleared, the interrupt is reported
after vector0 is enabled.

Fixes: b90fcc5bd904 ("net: hns3: add reset handling for VF when doing Core/Global/IMP reset")
Signed-off-by: Jiaran Zhang <zhangjiaran@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: hns3: disable mac in flr process

commit b81d8948746520f989e86d66292ff72b5056114a upstream.

The firmware will not disable mac in flr process. Therefore, the driver
needs to proactively disable mac during flr, which is the same as the
function reset.

Fixes: 35d93a30040c ("net: hns3: adjust the process of PF reset")
Signed-off-by: Yufeng Mo <moyufeng@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: hns3: change affinity_mask to numa node range

commit 1dc839ec09d3ab2a4156dc98328b8bc3586f2b70 upstream.

Currently, affinity_mask is set to a single cpu. As a result,
irqbalance becomes invalid in SUBSET or EXACT mode. To solve
this problem, change affinity_mask to numa node range. In this
way, irqbalance can be performed on the cpu of the numa node.

Fixes: 0812545487ec ("net: hns3: add interrupt affinity support for misc interrupt")
Signed-off-by: Yufeng Mo <moyufeng@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: hns3: pad the short tunnel frame before sending to hardware

commit d18e81183b1cb9c309266cbbce9acd3e0c528d04 upstream.

The hardware cannot handle short tunnel frames below 65 bytes,
and will cause vlan tag missing problem. So pads packet size to
65 bytes for tunnel frames to fix this bug.

Fixes: 3db084d28dc0("net: hns3: Fix for vxlan tx checksum bug")
Signed-off-by: Yufeng Mo <moyufeng@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: PPC: Book3S HV: Tolerate treclaim. in fake-suspend mode changing registers

commit 267cdfa21385d78c794768233678756e32b39ead upstream.

POWER9 DD2.2 and 2.3 hardware implements a "fake-suspend" mode where
certain TM instructions executed in HV=0 mode cause softpatch interrupts
so the hypervisor can emulate them and prevent problematic processor
conditions. In this fake-suspend mode, the treclaim. instruction does
not modify registers.

Unfortunately the rfscv instruction executed by the guest do not
generate softpatch interrupts, which can cause the hypervisor to lose
track of the fake-suspend mode, and it can execute this treclaim. while
not in fake-suspend mode. This modifies GPRs and crashes the hypervisor.

It's not trivial to disable scv in the guest with HFSCR now, because
they assume a POWER9 has scv available. So this fix saves and restores
checkpointed registers across the treclaim.

Fixes: 7854f7545bff ("KVM: PPC: Book3S: Rework TM save/restore code and make it C-callable")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210908101718.118522-2-npiggin@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ibmvnic: check failover_pending in login response

commit 273c29e944bda9a20a30c26cfc34c9a3f363280b upstream.

If a failover occurs before a login response is received, the login
response buffer maybe undefined. Check that there was no failover
before accessing the login response buffer.

Fixes: 032c5e82847a ("Driver for IBM System i/p VNIC protocol")
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dt-bindings: arm: Fix Toradex compatible typo

commit 55c21d57eafb7b379bb7b3e93baf9ca2695895b0 upstream.

Fix board compatible typo reported by dtbs_check.

Fixes: f4d1577e9bc6 ("dt-bindings: arm: Convert Tegra board/soc bindings to json-schema")
Signed-off-by: David Heidelberg <david@ixit.cz>
Link: https://lore.kernel.org/r/20210912165120.188490-1-david@ixit.cz
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

qed: Handle management FW error

commit 20e100f52730cd0db609e559799c1712b5f27582 upstream.

Handle MFW (management FW) error response in order to avoid a crash
during recovery flows.

Changes from v1:
- Add "Fixes tag".

Fixes: tag 5e7ba042fd05 ("qed: Fix reading stale configuration information")
Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: Shai Malin <smalin@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tcp: fix tp->undo_retrans accounting in tcp_sacktag_one()

commit 4f884f3962767877d7aabbc1ec124d2c307a4257 upstream.

Commit 10d3be569243 ("tcp-tso: do not split TSO packets at retransmit
time") may directly retrans a multiple segments TSO/GSO packet without
split, Since this commit, we can no longer assume that a retransmitted
packet is a single segment.

This patch fixes the tp->undo_retrans accounting in tcp_sacktag_one()
that use the actual segments(pcount) of the retransmitted packet.

Before that commit (10d3be569243), the assumption underlying the
tp->undo_retrans-- seems correct.

Fixes: 10d3be569243 ("tcp-tso: do not split TSO packets at retransmit time")
Signed-off-by: zhenggy <zhenggy@chinatelecom.cn>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Yuchung Cheng <ycheng@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: dsa: destroy the phylink instance on any error in dsa_slave_phy_setup

commit 6a52e73368038f47f6618623d75061dc263b26ae upstream.

DSA supports connecting to a phy-handle, and has a fallback to a non-OF
based method of connecting to an internal PHY on the switch's own MDIO
bus, if no phy-handle and no fixed-link nodes were present.

The -ENODEV error code from the first attempt (phylink_of_phy_connect)
is what triggers the second attempt (phylink_connect_phy).

However, when the first attempt returns a different error code than
-ENODEV, this results in an unbalance of calls to phylink_create and
phylink_destroy by the time we exit the function. The phylink instance
has leaked.

There are many other error codes that can be returned by
phylink_of_phy_connect. For example, phylink_validate returns -EINVAL.
So this is a practical issue too.

Fixes: aab9c4067d23 ("net: dsa: Plug in PHYLINK support")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/20210914134331.2303380-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/af_unix: fix a data-race in unix_dgram_poll

commit 04f08eb44b5011493d77b602fdec29ff0f5c6cd5 upstream.

syzbot reported another data-race in af_unix [1]

Lets change __skb_insert() to use WRITE_ONCE() when changing
skb head qlen.

Also, change unix_dgram_poll() to use lockless version
of unix_recvq_full()

It is verry possible we can switch all/most unix_recvq_full()
to the lockless version, this will be done in a future kernel version.

[1] HEAD commit: 8596e589b787732c8346f0482919e83cc9362db1

BUG: KCSAN: data-race in skb_queue_tail / unix_dgram_poll

write to 0xffff88814eeb24e0 of 4 bytes by task 25815 on cpu 0:
 __skb_insert include/linux/skbuff.h:1938 [inline]
 __skb_queue_before include/linux/skbuff.h:2043 [inline]
 __skb_queue_tail include/linux/skbuff.h:2076 [inline]
 skb_queue_tail+0x80/0xa0 net/core/skbuff.c:3264
 unix_dgram_sendmsg+0xff2/0x1600 net/unix/af_unix.c:1850
 sock_sendmsg_nosec net/socket.c:703 [inline]
 sock_sendmsg net/socket.c:723 [inline]
 ____sys_sendmsg+0x360/0x4d0 net/socket.c:2392
 ___sys_sendmsg net/socket.c:2446 [inline]
 __sys_sendmmsg+0x315/0x4b0 net/socket.c:2532
 __do_sys_sendmmsg net/socket.c:2561 [inline]
 __se_sys_sendmmsg net/socket.c:2558 [inline]
 __x64_sys_sendmmsg+0x53/0x60 net/socket.c:2558
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x3d/0x90 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x44/0xae

read to 0xffff88814eeb24e0 of 4 bytes by task 25834 on cpu 1:
 skb_queue_len include/linux/skbuff.h:1869 [inline]
 unix_recvq_full net/unix/af_unix.c:194 [inline]
 unix_dgram_poll+0x2bc/0x3e0 net/unix/af_unix.c:2777
 sock_poll+0x23e/0x260 net/socket.c:1288
 vfs_poll include/linux/poll.h:90 [inline]
 ep_item_poll fs/eventpoll.c:846 [inline]
 ep_send_events fs/eventpoll.c:1683 [inline]
 ep_poll fs/eventpoll.c:1798 [inline]
 do_epoll_wait+0x6ad/0xf00 fs/eventpoll.c:2226
 __do_sys_epoll_wait fs/eventpoll.c:2238 [inline]
 __se_sys_epoll_wait fs/eventpoll.c:2233 [inline]
 __x64_sys_epoll_wait+0xf6/0x120 fs/eventpoll.c:2233
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x3d/0x90 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x44/0xae

value changed: 0x0000001b -> 0x00000001

Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 25834 Comm: syz-executor.1 Tainted: G        W         5.14.0-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011

Fixes: 86b18aaa2b5b ("skbuff: fix a data race in skb_queue_len()")
Cc: Qian Cai <cai@lca.pw>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

vhost_net: fix OoB on sendmsg() failure.

commit 3c4cea8fa7f71f00c5279547043a84bc2a4d8b8c upstream.

If the sendmsg() call in vhost_tx_batch() fails, both the 'batched_xdp'
and 'done_idx' indexes are left unchanged. If such failure happens
when batched_xdp == VHOST_NET_BATCH, the next call to
vhost_net_build_xdp() will access and write memory outside the xdp
buffers area.

Since sendmsg() can only error with EBADFD, this change addresses the
issue explicitly freeing the XDP buffers batch on error.

Fixes: 0a0be13b8fe2 ("vhost_net: batch submitting XDP buffers to underlayer sockets")
Suggested-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

events: Reuse value read using READ_ONCE instead of re-reading it

commit b89a05b21f46150ac10a962aa50109250b56b03b upstream.

In perf_event_addr_filters_apply, the task associated with
the event (event->ctx->task) is read using READ_ONCE at the beginning
of the function, checked, and then re-read from event->ctx->task,
voiding all guarantees of the checks. Reuse the value that was read by
READ_ONCE to ensure the consistency of the task struct throughout the
function.

Fixes: 375637bc52495 ("perf/core: Introduce address range filtering")
Signed-off-by: Baptiste Lepers <baptiste.lepers@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20210906015310.12802-1-baptiste.lepers@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/mlx5: Fix potential sleeping in atomic context

commit ee27e330a953595903979ffdb84926843595a9fe upstream.

Fixes the below flow of sleeping in atomic context by releasing
the RCU lock before calling to free_match_list.

build_match_list() <- disables preempt
-> free_match_list()
   -> tree_put_node()
      -> down_write_ref_node() <- take write lock

Fixes: 693c6883bbc4 ("net/mlx5: Add hash table for flow groups in flow table")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/mlx5: FWTrace, cancel work on alloc pd error flow

commit dfe6fd72b5f1878b16aa2c8603e031bbcd66b96d upstream.

Handle error flow on mlx5_core_alloc_pd() failure,
read_fw_strings_work must be canceled.

Fixes: c71ad41ccb0c ("net/mlx5: FW tracer, events handling")
Reported-by: Pavel Machek (CIP) <pavel@denx.de>
Suggested-by: Pavel Machek (CIP) <pavel@denx.de>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Aya Levin <ayal@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf machine: Initialize srcline string member in add_location struct

commit 57f0ff059e3daa4e70a811cb1d31a49968262d20 upstream.

It's later supposed to be either a correct address or NULL. Without the
initialization, it may contain an undefined value which results in the
following segmentation fault:

  # perf top --sort comm -g --ignore-callees=do_idle

terminates with:

  #0  0x00007ffff56b7685 in __strlen_avx2 () from /lib64/libc.so.6
  #1  0x00007ffff55e3802 in strdup () from /lib64/libc.so.6
  #2  0x00005555558cb139 in hist_entry__init (callchain_size=<optimized out>, sample_self=true, template=0x7fffde7fb110, he=0x7fffd801c250) at util/hist.c:489
  #3  hist_entry__new (template=template@entry=0x7fffde7fb110, sample_self=sample_self@entry=true) at util/hist.c:564
  #4  0x00005555558cb4ba in hists__findnew_entry (hists=hists@entry=0x5555561d9e38, entry=entry@entry=0x7fffde7fb110, al=al@entry=0x7fffde7fb420,
      sample_self=sample_self@entry=true) at util/hist.c:657
  #5  0x00005555558cba1b in __hists__add_entry (hists=hists@entry=0x5555561d9e38, al=0x7fffde7fb420, sym_parent=<optimized out>, bi=bi@entry=0x0, mi=mi@entry=0x0,
      sample=sample@entry=0x7fffde7fb4b0, sample_self=true, ops=0x0, block_info=0x0) at util/hist.c:288
  #6  0x00005555558cbb70 in hists__add_entry (sample_self=true, sample=0x7fffde7fb4b0, mi=0x0, bi=0x0, sym_parent=<optimized out>, al=<optimized out>, hists=0x5555561d9e38)
      at util/hist.c:1056
  #7  iter_add_single_cumulative_entry (iter=0x7fffde7fb460, al=<optimized out>) at util/hist.c:1056
  #8  0x00005555558cc8a4 in hist_entry_iter__add (iter=iter@entry=0x7fffde7fb460, al=al@entry=0x7fffde7fb420, max_stack_depth=<optimized out>, arg=arg@entry=0x7fffffff7db0)
      at util/hist.c:1231
  #9  0x00005555557cdc9a in perf_event__process_sample (machine=<optimized out>, sample=0x7fffde7fb4b0, evsel=<optimized out>, event=<optimized out>, tool=0x7fffffff7db0)
      at builtin-top.c:842
  #10 deliver_event (qe=<optimized out>, qevent=<optimized out>) at builtin-top.c:1202
  #11 0x00005555558a9318 in do_flush (show_progress=false, oe=0x7fffffff80e0) at util/ordered-events.c:244
  #12 __ordered_events__flush (oe=oe@entry=0x7fffffff80e0, how=how@entry=OE_FLUSH__TOP, timestamp=timestamp@entry=0) at util/ordered-events.c:323
  #13 0x00005555558a9789 in __ordered_events__flush (timestamp=<optimized out>, how=<optimized out>, oe=<optimized out>) at util/ordered-events.c:339
  #14 ordered_events__flush (how=OE_FLUSH__TOP, oe=0x7fffffff80e0) at util/ordered-events.c:341
  #15 ordered_events__flush (oe=oe@entry=0x7fffffff80e0, how=how@entry=OE_FLUSH__TOP) at util/ordered-events.c:339
  #16 0x00005555557cd631 in process_thread (arg=0x7fffffff7db0) at builtin-top.c:1114
  #17 0x00007ffff7bb817a in start_thread () from /lib64/libpthread.so.0
  #18 0x00007ffff5656dc3 in clone () from /lib64/libc.so.6

If you look at the frame #2, the code is:

488  if (he->srcline) {
489          he->srcline = strdup(he->srcline);
490          if (he->srcline == NULL)
491              goto err_rawdata;
492  }

If he->srcline is not NULL (it is not NULL if it is uninitialized rubbish),
it gets strdupped and strdupping a rubbish random string causes the problem.

Also, if you look at the commit 1fb7d06a509e, it adds the srcline property
into the struct, but not initializing it everywhere needed.

Committer notes:

Now I see, when using --ignore-callees=do_idle we end up here at line
2189 in add_callchain_ip():

2181         if (al.sym != NULL) {
2182                 if (perf_hpp_list.parent && !*parent &&
2183                     symbol__match_regex(al.sym, &parent_regex))
2184                         *parent = al.sym;
2185                 else if (have_ignore_callees && root_al &&
2186                   symbol__match_regex(al.sym, &ignore_callees_regex)) {
2187                         /* Treat this symbol as the root,
2188                            forgetting its callees. */
2189                         *root_al = al;
2190                         callchain_cursor_reset(cursor);
2191                 }
2192         }

And the al that doesn't have the ->srcline field initialized will be
copied to the root_al, so then, back to:

1211 int hist_entry_iter__add(struct hist_entry_iter *iter, struct addr_location *al,
1212                          int max_stack_depth, void *arg)
1213 {
1214         int err, err2;
1215         struct map *alm = NULL;
1216
1217         if (al)
1218                 alm = map__get(al->map);
1219
1220         err = sample__resolve_callchain(iter->sample, &callchain_cursor, &iter->parent,
1221                                         iter->evsel, al, max_stack_depth);
1222         if (err) {
1223                 map__put(alm);
1224                 return err;
1225         }
1226
1227         err = iter->ops->prepare_entry(iter, al);
1228         if (err)
1229                 goto out;
1230
1231         err = iter->ops->add_single_entry(iter, al);
1232         if (err)
1233                 goto out;
1234

That al at line 1221 is what hist_entry_iter__add() (called from
sample__resolve_callchain()) saw as 'root_al', and then:

        iter->ops->add_single_entry(iter, al);

will go on with al->srcline with a bogus value, I'll add the above
sequence to the cset and apply, thanks!

Signed-off-by: Michael Petlan <mpetlan@redhat.com>
CC: Milian Wolff <milian.wolff@kdab.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Fixes: 1fb7d06a509e ("perf report Use srcline from callchain for hist entries")
Link: https //lore.kernel.org/r/20210719145332.29747-1-mpetlan@redhat.com
Reported-by: Juri Lelli <jlelli@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tipc: increase timeout in tipc_sk_enqueue()

commit f4bb62e64c88c93060c051195d3bbba804e56945 upstream.

In tipc_sk_enqueue() we use hardcoded 2 jiffies to extract
socket buffer from generic queue to particular socket.
The 2 jiffies is too short in case there are other high priority
tasks get CPU cycles for multiple jiffies update. As result, no
buffer could be enqueued to particular socket.

To solve this, we switch to use constant timeout 20msecs.
Then, the function will be expired between 2 jiffies (CONFIG_100HZ)
and 20 jiffies (CONFIG_1000HZ).

Fixes: c637c1035534 ("tipc: resolve race problem at unicast message reception")
Acked-by: Jon Maloy <jmaloy@redhat.com>
Signed-off-by: Hoang Le <hoang.h.le@dektech.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

r6040: Restore MDIO clock frequency after MAC reset

commit e3f0cc1a945fcefec0c7c9d9dfd028a51daa1846 upstream.

A number of users have reported that they were not able to get the PHY
to successfully link up, especially after commit c36757eb9dee ("net:
phy: consider AN_RESTART status when reading link status") where we
stopped reading just BMSR, but we also read BMCR to determine the link
status.

Andrius at NetBSD did a wonderful job at debugging the problem
and found out that the MDIO bus clock frequency would be incorrectly set
back to its default value which would prevent the MDIO bus controller
from reading PHY registers properly. Back when we only read BMSR, if we
read all 1s, we could falsely indicate a link status, though in general
there is a cable plugged in, so this went unnoticed. After a second read
of BMCR was added, a wrong read will lead to the inability to determine
a link UP condition which is when it started to be visibly broken, even
if it was long before that.

The fix consists in restoring the value of the MD_CSR register that was
set prior to the MAC reset.

Link: http://gnats.netbsd.org/cgi-bin/query-pr-single.pl?number=53494
Fixes: 90f750a81a29 ("r6040: consolidate MAC reset to its own function")
Reported-by: Andrius V <vezhlys@gmail.com>
Reported-by: Darek Strugacz <darek.strugacz@op.pl>
Tested-by: Darek Strugacz <darek.strugacz@op.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/l2tp: Fix reference count leak in l2tp_udp_recv_core

commit 9b6ff7eb666415e1558f1ba8a742f5db6a9954de upstream.

The reference count leak issue may take place in an error handling
path. If both conditions of tunnel->version == L2TP_HDR_VER_3 and the
return value of l2tp_v3_ensure_opt_in_linear is nonzero, the function
would directly jump to label invalid, without decrementing the reference
count of the l2tp_session object session increased earlier by
l2tp_tunnel_get_session(). This may result in refcount leaks.

Fix this issue by decrease the reference count before jumping to the
label invalid.

Fixes: 4522a70db7aa ("l2tp: fix reading optional fields of L2TPv3")
Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn>
Signed-off-by: Xin Xiong <xiongx18@fudan.edu.cn>
Signed-off-by: Xin Tan <tanxin.ctf@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dccp: don't duplicate ccid when cloning dccp sock

commit d9ea761fdd197351890418acd462c51f241014a7 upstream.

Commit 2677d2067731 ("dccp: don't free ccid2_hc_tx_sock ...") fixed
a UAF but reintroduced CVE-2017-6074.

When the sock is cloned, two dccps_hc_tx_ccid will reference to the
same ccid. So one can free the ccid object twice from two socks after
cloning.

This issue was found by "Hadar Manor" as well and assigned with
CVE-2020-16119, which was fixed in Ubuntu's kernel. So here I port
the patch from Ubuntu to fix it.

The patch prevents cloned socks from referencing the same ccid.

Fixes: 2677d2067731410 ("dccp: don't free ccid2_hc_tx_sock ...")
Signed-off-by: Zhenpeng Lin <zplin@psu.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ptp: dp83640: don't define PAGE0

commit 7366c23ff492ad260776a3ee1aaabba9fc773a8b upstream.

Building dp83640.c on arch/parisc/ produces a build warning for
PAGE0 being redefined. Since the macro is not used in the dp83640
driver, just make it a comment for documentation purposes.

In file included from ../drivers/net/phy/dp83640.c:23:
../drivers/net/phy/dp83640_reg.h:8: warning: "PAGE0" redefined
    8 | #define PAGE0                     0x0000
                 from ../drivers/net/phy/dp83640.c:11:
../arch/parisc/include/asm/page.h:187: note: this is the location of the previous definition
  187 | #define PAGE0   ((struct zeropage *)__PAGE_OFFSET)

Fixes: cb646e2b02b2 ("ptp: Added a clock driver for the National Semiconductor PHYTER.")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Richard Cochran <richard.cochran@omicron.at>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Heiner Kallweit <hkallweit1@gmail.com>
Cc: Russell King <linux@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20210913220605.19682-1-rdunlap@infradead.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net-caif: avoid user-triggerable WARN_ON(1)

commit 550ac9c1aaaaf51fd42e20d461f0b1cdbd55b3d2 upstream.

syszbot triggers this warning, which looks something
we can easily prevent.

If we initialize priv->list_field in chnl_net_init(),
then always use list_del_init(), we can remove robust_list_del()
completely.

WARNING: CPU: 0 PID: 3233 at net/caif/chnl_net.c:67 robust_list_del net/caif/chnl_net.c:67 [inline]
WARNING: CPU: 0 PID: 3233 at net/caif/chnl_net.c:67 chnl_net_uninit+0xc9/0x2e0 net/caif/chnl_net.c:375
Modules linked in:
CPU: 0 PID: 3233 Comm: syz-executor.3 Not tainted 5.14.0-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:robust_list_del net/caif/chnl_net.c:67 [inline]
RIP: 0010:chnl_net_uninit+0xc9/0x2e0 net/caif/chnl_net.c:375
Code: 89 eb e8 3a a3 ba f8 48 89 d8 48 c1 e8 03 42 80 3c 28 00 0f 85 bf 01 00 00 48 81 fb 00 14 4e 8d 48 8b 2b 75 d0 e8 17 a3 ba f8 <0f> 0b 5b 5d 41 5c 41 5d e9 0a a3 ba f8 4c 89 e3 e8 02 a3 ba f8 4c
RSP: 0018:ffffc90009067248 EFLAGS: 00010202
RAX: 0000000000008780 RBX: ffffffff8d4e1400 RCX: ffffc9000fd34000
RDX: 0000000000040000 RSI: ffffffff88bb6e49 RDI: 0000000000000003
RBP: ffff88802cd9ee08 R08: 0000000000000000 R09: ffffffff8d0e6647
R10: ffffffff88bb6dc2 R11: 0000000000000000 R12: ffff88803791ae08
R13: dffffc0000000000 R14: 00000000e600ffce R15: ffff888073ed3480
FS:  00007fed10fa0700(0000) GS:ffff8880b9d00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000001b2c322000 CR3: 00000000164a6000 CR4: 00000000001506e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 register_netdevice+0xadf/0x1500 net/core/dev.c:10347
 ipcaif_newlink+0x4c/0x260 net/caif/chnl_net.c:468
 __rtnl_newlink+0x106d/0x1750 net/core/rtnetlink.c:3458
 rtnl_newlink+0x64/0xa0 net/core/rtnetlink.c:3506
 rtnetlink_rcv_msg+0x413/0xb80 net/core/rtnetlink.c:5572
 netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2504
 netlink_unicast_kernel net/netlink/af_netlink.c:1314 [inline]
 netlink_unicast+0x533/0x7d0 net/netlink/af_netlink.c:1340
 netlink_sendmsg+0x86d/0xdb0 net/netlink/af_netlink.c:1929
 sock_sendmsg_nosec net/socket.c:704 [inline]
 sock_sendmsg+0xcf/0x120 net/socket.c:724
 __sys_sendto+0x21c/0x320 net/socket.c:2036
 __do_sys_sendto net/socket.c:2048 [inline]
 __se_sys_sendto net/socket.c:2044 [inline]
 __x64_sys_sendto+0xdd/0x1b0 net/socket.c:2044
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x44/0xae

Fixes: cc36a070b590 ("net-caif: add CAIF netdevice")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tipc: fix an use-after-free issue in tipc_recvmsg

commit cc19862ffe454a5b632ca202e5a51bfec9f89fd2 upstream.

syzbot reported an use-after-free crash:

  BUG: KASAN: use-after-free in tipc_recvmsg+0xf77/0xf90 net/tipc/socket.c:1979
  Call Trace:
   tipc_recvmsg+0xf77/0xf90 net/tipc/socket.c:1979
   sock_recvmsg_nosec net/socket.c:943 [inline]
   sock_recvmsg net/socket.c:961 [inline]
   sock_recvmsg+0xca/0x110 net/socket.c:957
   tipc_conn_rcv_from_sock+0x162/0x2f0 net/tipc/topsrv.c:398
   tipc_conn_recv_work+0xeb/0x190 net/tipc/topsrv.c:421
   process_one_work+0x98d/0x1630 kernel/workqueue.c:2276
   worker_thread+0x658/0x11f0 kernel/workqueue.c:2422

As Hoang pointed out, it was caused by skb_cb->bytes_read still accessed
after calling tsk_advance_rx_queue() to free the skb in tipc_recvmsg().

This patch is to fix it by accessing skb_cb->bytes_read earlier than
calling tsk_advance_rx_queue().

Fixes: f4919ff59c28 ("tipc: keep the skb in rcv queue until the whole data is read")
Reported-by: syzbot+e6741b97d5552f97c24d@syzkaller.appspotmail.com
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Jon Maloy <jmaloy@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/mm: Fix kern_addr_valid() to cope with existing but not present entries

commit 34b1999da935a33be6239226bfa6cd4f704c5c88 upstream.

Jiri Olsa reported a fault when running:

  # cat /proc/kallsyms | grep ksys_read
  ffffffff8136d580 T ksys_read
  # objdump -d --start-address=0xffffffff8136d580 --stop-address=0xffffffff8136d590 /proc/kcore

  /proc/kcore:     file format elf64-x86-64

  Segmentation fault

  general protection fault, probably for non-canonical address 0xf887ffcbff000: 0000 [#1] SMP PTI
  CPU: 12 PID: 1079 Comm: objdump Not tainted 5.14.0-rc5qemu+ #508
  Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.14.0-4.fc34 04/01/2014
  RIP: 0010:kern_addr_valid
  Call Trace:
   read_kcore
   ? rcu_read_lock_sched_held
   ? rcu_read_lock_sched_held
   ? rcu_read_lock_sched_held
   ? trace_hardirqs_on
   ? rcu_read_lock_sched_held
   ? lock_acquire
   ? lock_acquire
   ? rcu_read_lock_sched_held
   ? lock_acquire
   ? rcu_read_lock_sched_held
   ? rcu_read_lock_sched_held
   ? rcu_read_lock_sched_held
   ? lock_release
   ? _raw_spin_unlock
   ? __handle_mm_fault
   ? rcu_read_lock_sched_held
   ? lock_acquire
   ? rcu_read_lock_sched_held
   ? lock_release
   proc_reg_read
   ? vfs_read
   vfs_read
   ksys_read
   do_syscall_64
   entry_SYSCALL_64_after_hwframe

The fault happens because kern_addr_valid() dereferences existent but not
present PMD in the high kernel mappings.

Such PMDs are created when free_kernel_image_pages() frees regions larger
than 2Mb. In this case, a part of the freed memory is mapped with PMDs and
the set_memory_np_noalias() -> ... -> __change_page_attr() sequence will
mark the PMD as not present rather than wipe it completely.

Have kern_addr_valid() check whether higher level page table entries are
present before trying to dereference them to fix this issue and to avoid
similar issues in the future.

Stable backporting note:
------------------------

Note that the stable marking is for all active stable branches because
there could be cases where pagetable entries exist but are not valid -
see 9a14aefc1d28 ("x86: cpa, fix lookup_address"), for example. So make
sure to be on the safe side here and use pXY_present() accessors rather
than pXY_none() which could #GP when accessing pages in the direct map.

Also see:

  c40a56a7818c ("x86/mm/init: Remove freed kernel image areas from alias mapping")

for more info.

Reported-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Dave Hansen <dave.hansen@intel.com>
Tested-by: Jiri Olsa <jolsa@redhat.com>
Cc: <stable@vger.kernel.org> # 4.4+
Link: https://lkml.kernel.org/r/20210819132717.19358-1-rppt@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390/sclp: fix Secure-IPL facility detection

commit d76b14f3971a0638b6cd0da289f8b48acee287d0 upstream.

Prevent out-of-range access if the returned SCLP SCCB response is smaller
in size than the address of the Secure-IPL flag.

Fixes: c9896acc7851 ("s390/ipl: Provide has_secure sysfs attribute")
Cc: stable@vger.kernel.org # 5.2+
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/etnaviv: add missing MMU context put when reaping MMU mapping

commit f2faea8b64125852fa9acc6771c07fc0311a039b upstream.

When we forcefully evict a mapping from the the address space and thus the
MMU context, the MMU context is leaked, as the mapping no longer points to
it, so it doesn't get freed when the GEM object is destroyed. Add the
mssing context put to fix the leak.

Cc: stable@vger.kernel.org # 5.4
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Tested-by: Michael Walle <michael@walle.cc>
Tested-by: Marek Vasut <marex@denx.de>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/etnaviv: reference MMU context when setting up hardware state

commit d6408538f091fb22d47f792d4efa58143d56c3fb upstream.

Move the refcount manipulation of the MMU context to the point where the
hardware state is programmed. At that point it is also known if a previous
MMU state is still there, or the state needs to be reprogrammed with a
potentially different context.

Cc: stable@vger.kernel.org # 5.4
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Tested-by: Michael Walle <michael@walle.cc>
Tested-by: Marek Vasut <marex@denx.de>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/etnaviv: fix MMU context leak on GPU reset

commit f978a5302f5566480c58ffae64a16d34456801bd upstream.

After a reset the GPU is no longer using the MMU context and may be
restarted with a different context. While the mmu_state proeprly was
cleared, the context wasn't unreferenced, leading to a memory leak.

Cc: stable@vger.kernel.org # 5.4
Reported-by: Michael Walle <michael@walle.cc>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Tested-by: Michael Walle <michael@walle.cc>
Tested-by: Marek Vasut <marex@denx.de>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/etnaviv: exec and MMU state is lost when resetting the GPU

commit 725cbc7884c37f3b4f1777bc1aea6432cded8ca5 upstream.

When the GPU is reset both the current exec state, as well as all MMU
state is lost. Move the driver side state tracking into the reset function
to keep hardware and software state from diverging.

Cc: stable@vger.kernel.org # 5.4
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Tested-by: Michael Walle <michael@walle.cc>
Tested-by: Marek Vasut <marex@denx.de>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/etnaviv: keep MMU context across runtime suspend/resume

commit 8f3eea9d01d7b0f95b0fe04187c0059019ada85b upstream.

The MMU state may be kept across a runtime suspend/resume cycle, as we
avoid a full hardware reset to keep the latency of the runtime PM small.

Don't pretend that the MMU state is lost in driver state. The MMU
context is pushed out when new HW jobs with a different context are
coming in. The only exception to this is when the GPU is unbound, in
which case we need to make sure to also free the last active context.

Cc: stable@vger.kernel.org # 5.4
Reported-by: Michael Walle <michael@walle.cc>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Tested-by: Michael Walle <michael@walle.cc>
Tested-by: Marek Vasut <marex@denx.de>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/etnaviv: stop abusing mmu_context as FE running marker

commit 23e0f5a57d0ecec86e1fc82194acd94aede21a46 upstream.

While the DMA frontend can only be active when the MMU context is set, the
reverse isn't necessarily true, as the frontend can be stopped while the
MMU state is kept. Stop treating mmu_context being set as a indication that
the frontend is running and instead add a explicit property.

Cc: stable@vger.kernel.org # 5.4
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Tested-by: Michael Walle <michael@walle.cc>
Tested-by: Marek Vasut <marex@denx.de>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/etnaviv: put submit prev MMU context when it exists

commit cda7532916f7bc860b36a1806cb8352e6f63dacb upstream.

The prev context is the MMU context at the time of the job
queueing in hardware. As a job might be queued multiple times
due to recovery after a GPU hang, we need to make sure to put
the stale prev MMU context from a prior queuing, to avoid the
reference and thus the MMU context leaking.

Cc: stable@vger.kernel.org # 5.4
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Tested-by: Michael Walle <michael@walle.cc>
Tested-by: Marek Vasut <marex@denx.de>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/etnaviv: return context from etnaviv_iommu_context_get

commit 78edefc05e41352099ffb8f06f8d9b2d091e29cd upstream.

Being able to have the refcount manipulation in an assignment makes
it much easier to parse the code.

Cc: stable@vger.kernel.org # 5.4
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Tested-by: Michael Walle <michael@walle.cc>
Tested-by: Marek Vasut <marex@denx.de>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amd/amdgpu: Increase HWIP_MAX_INSTANCE to 10

commit 67a44e659888569a133a8f858c8230e9d7aad1d5 upstream.

Seems like newer cards can have even more instances now.
Found by UBSAN: array-index-out-of-bounds in
drivers/gpu/drm/amd/amdgpu/amdgpu_discovery.c:318:29
index 8 is out of range for type 'uint32_t *[8]'

Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1697
Cc: stable@vger.kernel.org
Signed-off-by: Ernst Sjöstrand <ernstp@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI: Add AMD GPU multi-function power dependencies

commit 60b78ed088ebe1a872ee1320b6c5ad6ee2c4bd9a upstream.

Some AMD GPUs have built-in USB xHCI and USB Type-C UCSI controllers with
power dependencies between the GPU and the other functions as in
6d2e369f0d4c ("PCI: Add NVIDIA GPU multi-function power dependencies").

Add device link support for the AMD integrated USB xHCI and USB Type-C UCSI
controllers.

Without this, runtime power management, including GPU resume and temp and
fan sensors don't work correctly.

Reported-at: https://gitlab.freedesktop.org/drm/amd/-/issues/1704
Link: https://lore.kernel.org/r/20210903063311.3606226-1-evan.quan@amd.com
Signed-off-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PM: base: power: don't try to use non-existing RTC for storing data

commit 0560204b360a332c321124dbc5cdfd3364533a74 upstream.

If there is no legacy RTC device, don't try to use it for storing trace
data across suspend/resume.

Cc: <stable@vger.kernel.org>
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Rafael J. Wysocki <rafael@kernel.org>
Link: https://lore.kernel.org/r/20210903084937.19392-2-jgross@suse.com
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64/sve: Use correct size when reinitialising SVE state

commit e35ac9d0b56e9efefaeeb84b635ea26c2839ea86 upstream.

When we need a buffer for SVE register state we call sve_alloc() to make
sure that one is there. In order to avoid repeated allocations and frees
we keep the buffer around unless we change vector length and just memset()
it to ensure a clean register state. The function that deals with this
takes the task to operate on as an argument, however in the case where we
do a memset() we initialise using the SVE state size for the current task
rather than the task passed as an argument.

This is only an issue in the case where we are setting the register state
for a task via ptrace and the task being configured has a different vector
length to the task tracing it. In the case where the buffer is larger in
the traced process we will leak old state from the traced process to
itself, in the case where the buffer is smaller in the traced process we
will overflow the buffer and corrupt memory.

Fixes: bc0ee4760364 ("arm64/sve: Core task context handling")
Cc: <stable@vger.kernel.org> # 4.15.x
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20210909165356.10675-1-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bnx2x: Fix enabling network interfaces without VFs

commit 52ce14c134a003fee03d8fc57442c05a55b53715 upstream.

This function is called to enable SR-IOV when available,
not enabling interfaces without VFs was a regression.

Fixes: 65161c35554f ("bnx2x: Fix missing error code in bnx2x_iov_init_one()")
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Reported-by: YunQiang Su <wzssyqa@gmail.com>
Tested-by: YunQiang Su <wzssyqa@gmail.com>
Cc: stable@vger.kernel.org
Acked-by: Shai Malin <smalin@marvell.com>
Link: https://lore.kernel.org/r/20210912190523.27991-1-bunk@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xen: reset legacy rtc flag for PV domU

commit f68aa100d815b5b4467fd1c3abbe3b99d65fd028 upstream.

A Xen PV guest doesn't have a legacy RTC device, so reset the legacy
RTC flag. Otherwise the following WARN splat will occur at boot:

[    1.333404] WARNING: CPU: 1 PID: 1 at /home/gross/linux/head/drivers/rtc/rtc-mc146818-lib.c:25 mc146818_get_time+0x1be/0x210
[    1.333404] Modules linked in:
[    1.333404] CPU: 1 PID: 1 Comm: swapper/0 Tainted: G        W         5.14.0-rc7-default+ #282
[    1.333404] RIP: e030:mc146818_get_time+0x1be/0x210
[    1.333404] Code: c0 64 01 c5 83 fd 45 89 6b 14 7f 06 83 c5 64 89 6b 14 41 83 ec 01 b8 02 00 00 00 44 89 63 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3 <0f> 0b 48 c7 c7 30 0e ef 82 4c 89 e6 e8 71 2a 24 00 48 c7 c0 ff ff
[    1.333404] RSP: e02b:ffffc90040093df8 EFLAGS: 00010002
[    1.333404] RAX: 00000000000000ff RBX: ffffc90040093e34 RCX: 0000000000000000
[    1.333404] RDX: 0000000000000001 RSI: 0000000000000000 RDI: 000000000000000d
[    1.333404] RBP: ffffffff82ef0e30 R08: ffff888005013e60 R09: 0000000000000000
[    1.333404] R10: ffffffff82373e9b R11: 0000000000033080 R12: 0000000000000200
[    1.333404] R13: 0000000000000000 R14: 0000000000000002 R15: ffffffff82cdc6d4
[    1.333404] FS:  0000000000000000(0000) GS:ffff88807d440000(0000) knlGS:0000000000000000
[    1.333404] CS:  10000e030 DS: 0000 ES: 0000 CR0: 0000000080050033
[    1.333404] CR2: 0000000000000000 CR3: 000000000260a000 CR4: 0000000000050660
[    1.333404] Call Trace:
[    1.333404]  ? wakeup_sources_sysfs_init+0x30/0x30
[    1.333404]  ? rdinit_setup+0x2b/0x2b
[    1.333404]  early_resume_init+0x23/0xa4
[    1.333404]  ? cn_proc_init+0x36/0x36
[    1.333404]  do_one_initcall+0x3e/0x200
[    1.333404]  kernel_init_freeable+0x232/0x28e
[    1.333404]  ? rest_init+0xd0/0xd0
[    1.333404]  kernel_init+0x16/0x120
[    1.333404]  ret_from_fork+0x1f/0x30

Cc: <stable@vger.kernel.org>
Fixes: 8d152e7a5c7537 ("x86/rtc: Replace paravirt rtc check with platform legacy quirk")
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lore.kernel.org/r/20210903084937.19392-3-jgross@suse.com
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: fix upper limit for max_inline for page size 64K

commit 6f93e834fa7c5faa0372e46828b4b2a966ac61d7 upstream.

The mount option max_inline ranges from 0 to the sectorsize (which is
now equal to page size). But we parse the mount options too early and
before the actual sectorsize is read from the superblock. So the upper
limit of max_inline is unaware of the actual sectorsize and is limited
by the temporary sectorsize 4096, even on a system where the default
sectorsize is 64K.

Fix this by reading the superblock sectorsize before the mount option
parse.

Reported-by: Alexander Tsvetkov <alexander.tsvetkov@oracle.com>
CC: stable@vger.kernel.org # 5.4+
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/panfrost: Clamp lock region to Bifrost minimum

commit bd7ffbc3ca12629aeb66fb9e28cf42b7f37e3e3b upstream.

When locking a region, we currently clamp to a PAGE_SIZE as the minimum
lock region. While this is valid for Midgard, it is invalid for Bifrost,
where the minimum locking size is 8x larger than the 4k page size. Add a
hardware definition for the minimum lock region size (corresponding to
KBASE_LOCK_REGION_MIN_SIZE_LOG2 in kbase) and respect it.

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Tested-by: Chris Morgan <macromorgan@hotmail.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210824173028.7528-4-alyssa.rosenzweig@collabora.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/panfrost: Use u64 for size in lock_region

commit a77b58825d7221d4a45c47881c35a47ba003aa73 upstream.

Mali virtual addresses are 48-bit. Use a u64 instead of size_t to ensure
we can express the "lock everything" condition as ~0ULL without
overflow. This code was silently broken on any platform where a size_t
is less than 48-bits; in particular, it was broken on 32-bit armv7
platforms which remain in use with panfrost. (Mainly RK3288)

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Suggested-by: Rob Herring <robh@kernel.org>
Tested-by: Chris Morgan <macromorgan@hotmail.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Fixes: f3ba91228e8e ("drm/panfrost: Add initial panfrost driver")
Cc: <stable@vger.kernel.org>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210824173028.7528-3-alyssa.rosenzweig@collabora.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/panfrost: Simplify lock_region calculation

commit b5fab345654c603c07525100d744498f28786929 upstream.

In lock_region, simplify the calculation of the region_width parameter.
This field is the size, but encoded as ceil(log2(size)) - 1.
ceil(log2(size)) may be computed directly as fls(size - 1). However, we
want to use the 64-bit versions as the amount to lock can exceed
32-bits.

This avoids undefined (and completely wrong) behaviour when locking all
memory (size ~0). In this case, the old code would "round up" ~0 to the
nearest page, overflowing to 0. Since fls(0) == 0, this would calculate
a region width of 10 + 0 = 10. But then the code would shift by
(region_width - 11) = -1. As shifting by a negative number is undefined,
UBSAN flags the bug. Of course, even if it were defined the behaviour is
wrong, instead of locking all memory almost none would get locked.

The new form of the calculation corrects this special case and avoids
the undefined behaviour.

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reported-and-tested-by: Chris Morgan <macromorgan@hotmail.com>
Fixes: f3ba91228e8e ("drm/panfrost: Add initial panfrost driver")
Cc: <stable@vger.kernel.org>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210824173028.7528-2-alyssa.rosenzweig@collabora.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amdgpu: Fix BUG_ON assert

commit ea7acd7c5967542353430947f3faf699e70602e5 upstream.

With added CPU domain to placement you can have
now 3 placemnts at once.

CC: stable@kernel.org
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210622162339.761651-5-andrey.grodzovsky@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/msi/mdp4: populate priv->kms in mdp4_kms_init

commit cb0927ab80d224c9074f53d1a55b087d12ec5a85 upstream.

Without this fix boot throws NULL ptr exception at msm_dsi_manager_setup_encoder
on devices like Nexus 7 2013 (MDP4 v4.4).

Fixes: 03436e3ec69c ("drm/msm/dsi: Move setup_encoder to modeset_init")
Cc: <stable@vger.kernel.org>
Signed-off-by: David Heidelberg <david@ixit.cz>
Link: https://lore.kernel.org/r/20210811170631.39296-1-david@ixit.cz
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: dsa: lantiq_gswip: fix maximum frame length

commit 552799f8b3b0074d2617f53a63a088f9514a66e3 upstream.

Currently, outgoing packets larger than 1496 bytes are dropped when
tagged VLAN is used on a switch port.

Add the frame check sequence length to the value of the register
GSWIP_MAC_FLEN to fix this. This matches the lantiq_ppa vendor driver,
which uses a value consisting of 1518 bytes for the MAC frame, plus the
lengths of special tag and VLAN tags.

Fixes: 14fceff4771e ("net: dsa: Add Lantiq / Intel DSA driver for vrx200")
Cc: stable@vger.kernel.org
Signed-off-by: Jan Hoffmann <jan@3e8.eu>
Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>