USB: whci-hcd: fix endian conversion in qset_clear()

commit 8746c83d538cab273d335acb2be226d096f4a5af upstream.

qset->qh.link is an __le64 field and we should be using cpu_to_le64()
to fill it.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

Staging: comedi: fix signal handling in read and write

commit 6a9ce6b654e491981f6ef7e214cbd4f63e033848 upstream.

After sleeping on a wait queue, signal_pending(current) should be
checked (not before sleeping).

Acked-by: Alessandro Rubini <rubini@gnudd.com>
Signed-off-by: Federico Vaga <federico.vaga@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

staging: comedi: fix oops for USB DAQ devices.

commit 3ffab428f40849ed5f21bcfd7285bdef7902f9ca upstream.

This fixes kernel oops when an USB DAQ device is plugged out while it's
communicating with the userspace software.

Signed-off-by: Bernd Porr <berndporr@f2s.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

staging: usbip: bugfix for deadlock

commit 438957f8d4a84daa7fa5be6978ad5897a2e9e5e5 upstream.

Interrupts must be disabled prior to calling usb_hcd_unlink_urb_from_ep.
If interrupts are not disabled, it can potentially lead to a deadlock.
The deadlock is readily reproduceable on a slower (ARM based) device
such as the TI Pandaboard.

Signed-off-by: Bart Westgeest <bart@elbrys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

nl80211: fix MAC address validation

commit e007b857e88097c96c45620bf3b04a4e309053d1 upstream.

MAC addresses have a fixed length. The current
policy allows passing < ETH_ALEN bytes, which
might result in reading beyond the buffer.

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

p54spi: Fix workqueue deadlock

commit 2d1618170eb493d18f66f2ac03775409a6fb97c6 upstream.

priv->work must not be synced while priv->mutex is locked, because
the mutex is taken in the work handler.
Move cancel_work_sync down to after the device shutdown code.
This is safe, because the work handler checks fw_state and bails out
early in case of a race.

Signed-off-by: Michael Buesch <m@bues.ch>
Acked-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

p54spi: Add missing spin_lock_init

commit 32d3a3922d617a5a685a5e2d24b20d0e88f192a9 upstream.

The tx_lock is not initialized properly. Add spin_lock_init().

Signed-off-by: Michael Buesch <m@bues.ch>
Acked-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

timekeeping: add arch_offset hook to ktime_get functions

commit d004e024058a0eaca097513ce62cbcf978913e0a upstream.

ktime_get and ktime_get_ts were calling timekeeping_get_ns()
but later they were not calling arch_gettimeoffset() so architectures
using this mechanism returned 0 ns when calling these functions.

This happened for example when running Busybox's ping which calls
syscall(__NR_clock_gettime, CLOCK_MONOTONIC, ts) which eventually
calls ktime_get. As a result the returned ping travel time was zero.

Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

SUNRPC: Ensure we return EAGAIN in xs_nospace if congestion is cleared

commit 24ca9a847791fd53d9b217330b15f3c285827a18 upstream.

By returning '0' instead of 'EAGAIN' when the tests in xs_nospace() fail
to find evidence of socket congestion, we are making the RPC engine believe
that the message was incorrectly sent and so it disconnects the socket
instead of just retrying.

The bug appears to have been introduced by commit
5e3771ce2d6a69e10fcc870cdf226d121d868491 (SUNRPC: Ensure that xs_nospace
return values are propagated).

Reported-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Tested-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

ALSA: lx6464es - fix device communication via command bus

commit a29878553a9a7b4c06f93c7e383527cf014d4ceb upstream.

commit 6175ddf06b6172046a329e3abfd9c901a43efd2e optimized the mem*io
functions that have been used to send commands to the device. these
optimizations somehow corrupted the communication with the lx6464es,
that resulted the device to be unusable with kernels after 2.6.33.

this patch emulates the memcpy_*_io functions via a loop to avoid these
problems.

Signed-off-by: Tim Blechmann <tim@klingt.org>
LKML-Reference: <4ECB5257.4040600@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

ARM: 7161/1: errata: no automatic store buffer drain

commit 11ed0ba1754841316d4095478944300acf19acc3 upstream.

This patch implements a workaround for PL310 erratum 769419. On
revisions of the PL310 prior to r3p2, the Store Buffer does not
automatically drain. This can cause normal, non-cacheable writes to be
retained when the memory system is idle, leading to suboptimal I/O
performance for drivers using coherent DMA.

This patch adds an optional wmb() call to the cpu_idle loop. On systems
with an outer cache, this causes an explicit flush of the store buffer.

Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Tested-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

PCI hotplug: shpchp: don't blindly claim non-AMD 0x7450 device IDs

commit 4cac2eb158c6da0c761689345c6cc5df788a6292 upstream.

Previously we claimed device ID 0x7450, regardless of the vendor, which is
clearly wrong.  Now we'll claim that device ID only for AMD.

I suspect this was just a typo in the original code, but it's possible this
change will break shpchp on non-7450 AMD bridges.  If so, we'll have to fix
them as we find them.

Reference: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=638863
Reported-by: Ralf Jung <ralfjung-e@gmx.de>
Cc: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

eCryptfs: Extend array bounds for all filename chars

commit 0f751e641a71157aa584c2a2e22fda52b52b8a56 upstream.

From mhalcrow's original commit message:

    Characters with ASCII values greater than the size of
    filename_rev_map[] are valid filename characters.
    ecryptfs_decode_from_filename() will access kernel memory beyond
    that array, and ecryptfs_parse_tag_70_packet() will then decrypt
    those characters. The attacker, using the FNEK of the crafted file,
    can then re-encrypt the characters to reveal the kernel memory past
    the end of the filename_rev_map[] array. I expect low security
    impact since this array is statically allocated in the text area,
    and the amount of memory past the array that is accessible is
    limited by the largest possible ASCII filename character.

This patch solves the issue reported by mhalcrow but with an
implementation suggested by Linus to simply extend the length of
filename_rev_map[] to 256. Characters greater than 0x7A are mapped to
0x00, which is how invalid characters less than 0x7A were previously
being handled.

Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
Reported-by: Michael Halcrow <mhalcrow@google.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

i2c-algo-bit: Generate correct i2c address sequence for 10-bit target

commit cc6bcf7d2ec2234e7b41770185e4dc826390185e upstream.

The wrong bits were put on the wire, fix that.

This fixes kernel bug #42562.

Signed-off-by: Sheng-Hui J. Chu <jeffchu@broadcom.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

x86, ioapic: initialize nr_ioapic_registers early in mp_register_ioapic()

Lin Bao reported that one of the HP platforms failed to boot
2.6.32 kernel, when the BIOS enabled interrupt-remapping and
x2apic before handing over the control to the Linux kernel.

During boot, Linux kernel masks all the interrupt sources
(8259, IO-APIC RTE's), setup the interrupt-remapping hardware
with the OS controlled table and unmasks the 8259 interrupts
but not the IO-APIC RTE's (as the newly setup interrupt-remapping
table and the IO-APIC RTE's are not yet programmed by the kernel).

Shortly after this, IO-APIC RTE's and the interrupt-remapping table
entries are programmed based on the ACPI tables etc. So the
expectation is that any interrupt during this window will be dropped
and not see the intermediate configuration.

In the reported problematic case, BIOS has configured the IO-APIC
in virtual wire-B mode. Between the window of the kernel setting up
new interrupt-remapping table  and the IO-APIC RTE's are properly
configured, an interrupt gets routed by the IO-APIC RTE (setup
by the virtual wire-B configuration) and sees the empty
interrupt-remapping table entry, resulting in vt-d fault causing
the platform to generate NMI. And the OS panics on this unexpected NMI.

This problem doesn't happen with more recent kernels and closer
look at the 2.6.32 kernel shows that the code which masks
the IO-APIC RTE's is not working as expected as the nr_ioapic_registers
for each IO-APIC is not yet initialized at this point. In the later
kernels we initialize nr_ioapic_registers much before and
everything works as expected.

For 2.6.[32..34] kernels, fix this issue by initializing
nr_ioapic_registers early in mp_register_ioapic()

[ Relevant upstream commit info:
  commit 7716a5c4ff5f1f3dc5e9edcab125cbf7fceef0af
  Author: Eric W. Biederman <ebiederm@xmission.com>
  Date:   Tue Mar 30 01:07:12 2010 -0700

    x86, ioapic: Move nr_ioapic_registers calculation to mp_register_ioapic.

  As the upstream commit depends on quite a few prior commits
  and some followup fixes in the mainline, we just picked
  the smallest relevant hunk for fixing the issue at hand.
  Problematic platform uses ACPI for IO-APIC, VT-d enumeration etc
  and this hunk only touches the ACPI based platforms.

  nr_ioapic_reigsters initialization in enable_IO_APIC() is still
  retained, so that other configurations like legacy MPS table based
  enumeration etc works with no change.
]

Reported-and-tested-by: Zhang, Lin-Bao <linbao.zhang@hp.com>
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

xfs: fix acl count validation in xfs_acl_from_disk()

commit 093019cf1b18dd31b2c3b77acce4e000e2cbc9ce upstream.

Commit fa8b18ed didn't prevent the integer overflow and possible
memory corruption.  "count" can go negative and bypass the check.

Signed-off-by: Xi Wang <xi.wang@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ben Myers <bpm@sgi.com>
[PG: in 2.6.34, xfs still had "linux-2.6" as a path component.]
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

xfs: validate acl count

commit fa8b18edd752a8b4e9d1ee2cd615b82c93cf8bba upstream.

This prevents in-memory corruption and possible panics if the on-disk
ACL is badly corrupted.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ben Myers <bpm@sgi.com>
[PG: in 2.6.34, xfs still had "linux-2.6" as a path component.]
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

inotify: stop kernel memory leak on file creation failure

commit a2ae4cc9a16e211c8a128ba10d22a85431f093ab upstream.

If inotify_init is unable to allocate a new file for the new inotify
group we leak the new group.  This patch drops the reference on the
group on file allocation failure.

Reported-by: Vegard Nossum <vegard.nossum@gmail.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

genalloc: stop crashing the system when destroying a pool

commit eedce141cd2dad8d0cefc5468ef41898949a7031 upstream.

The genalloc code uses the bitmap API from include/linux/bitmap.h and
lib/bitmap.c, which is based on long values.  Both bitmap_set from
lib/bitmap.c and bitmap_set_ll, which is the lockless version from
genalloc.c, use BITMAP_LAST_WORD_MASK to set the first bits in a long in
the bitmap.

That one uses (1 << bits) - 1, 0b111, if you are setting the first three
bits.  This means that the API counts from the least significant bits
(LSB from now on) to the MSB.  The LSB in the first long is bit 0, then.
The same works for the lookup functions.

The genalloc code uses longs for the bitmap, as it should.  In
include/linux/genalloc.h, struct gen_pool_chunk has unsigned long
bits[0] as its last member.  When allocating the struct, genalloc should
reserve enough space for the bitmap.  This should be a proper number of
longs that can fit the amount of bits in the bitmap.

However, genalloc allocates an integer number of bytes that fit the
amount of bits, but may not be an integer amount of longs.  9 bytes, for
example, could be allocated for 70 bits.

This is a problem in itself if the Least Significat Bit in a long is in
the byte with the largest address, which happens in Big Endian machines.
This means genalloc is not allocating the byte in which it will try to
set or check for a bit.

This may end up in memory corruption, where genalloc will try to set the
bits it has not allocated.  In fact, genalloc may not set these bits
because it may find them already set, because they were not zeroed since
they were not allocated.  And that's what causes a BUG when
gen_pool_destroy is called and check for any set bits.

What really happens is that genalloc uses kmalloc_node with __GFP_ZERO
on gen_pool_add_virt.  With SLAB and SLUB, this means the whole slab
will be cleared, not only the requested bytes.  Since struct
gen_pool_chunk has a size that is a multiple of 8, and slab sizes are
multiples of 8, we get lucky and allocate and clear the right amount of
bytes.

Hower, this is not the case with SLOB or with older code that did memset
after allocating instead of using __GFP_ZERO.

So, a simple module as this (running 3.6.0), will cause a crash when
rmmod'ed.

  [root@phantom-lp2 foo]# cat foo.c
  #include <linux/kernel.h>
  #include <linux/module.h>
  #include <linux/init.h>
  #include <linux/genalloc.h>

  MODULE_LICENSE("GPL");
  MODULE_VERSION("0.1");

  static struct gen_pool *foo_pool;

  static __init int foo_init(void)
  {
          int ret;
          foo_pool = gen_pool_create(10, -1);
          if (!foo_pool)
                  return -ENOMEM;
          ret = gen_pool_add(foo_pool, 0xa0000000, 32 << 10, -1);
          if (ret) {
                  gen_pool_destroy(foo_pool);
                  return ret;
          }
          return 0;
  }

  static __exit void foo_exit(void)
  {
          gen_pool_destroy(foo_pool);
  }

  module_init(foo_init);
  module_exit(foo_exit);
  [root@phantom-lp2 foo]# zcat /proc/config.gz | grep SLOB
  CONFIG_SLOB=y
  [root@phantom-lp2 foo]# insmod ./foo.ko
  [root@phantom-lp2 foo]# rmmod foo
  ------------[ cut here ]------------
  kernel BUG at lib/genalloc.c:243!
  cpu 0x4: Vector: 700 (Program Check) at [c0000000bb0e7960]
      pc: c0000000003cb50c: .gen_pool_destroy+0xac/0x110
      lr: c0000000003cb4fc: .gen_pool_destroy+0x9c/0x110
      sp: c0000000bb0e7be0
     msr: 8000000000029032
    current = 0xc0000000bb0e0000
    paca    = 0xc000000006d30e00   softe: 0        irq_happened: 0x01
      pid   = 13044, comm = rmmod
  kernel BUG at lib/genalloc.c:243!
  [c0000000bb0e7ca0] d000000004b00020 .foo_exit+0x20/0x38 [foo]
  [c0000000bb0e7d20] c0000000000dff98 .SyS_delete_module+0x1a8/0x290
  [c0000000bb0e7e30] c0000000000097d4 syscall_exit+0x0/0x94
  --- Exception: c00 (System Call) at 000000800753d1a0
  SP (fffd0b0e640) is in userspace

Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Benjamin Gaignard <benjamin.gaignard@stericsson.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

md: Don't truncate size at 4TB for RAID0 and Linear

commit 667a5313ecd7308d79629c0738b0db588b0b0a4e upstream.

commit 27a7b260f71439c40546b43588448faac01adb93
   md: Fix handling for devices from 2TB to 4TB in 0.90 metadata.

changed 0.90 metadata handling to truncated size to 4TB as that is
all that 0.90 can record.
However for RAID0 and Linear, 0.90 doesn't need to record the size, so
this truncation is not needed and causes working arrays to become too small.

So avoid the truncation for RAID0 and Linear

This bug was introduced in 3.1 and is suitable for any stable kernels
from then onwards.
As the offending commit was tagged for 'stable', any stable kernel
that it was applied to should also get this patch.  That includes
at least 2.6.32, 2.6.33 and 3.0. (Thanks to Ben Hutchings for
providing that list).

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

md: Fix handling for devices from 2TB to 4TB in 0.90 metadata.

commit 27a7b260f71439c40546b43588448faac01adb93 upstream.

0.90 metadata uses an unsigned 32bit number to count the number of
kilobytes used from each device.
This should allow up to 4TB per device.
However we multiply this by 2 (to get sectors) before casting to a
larger type, so sizes above 2TB get truncated.

Also we allow rdev->sectors to be larger than 4TB, so it is possible
for the array to be resized larger than the metadata can handle.
So make sure rdev->sectors never exceeds 4TB when 0.90 metadata is in
used.

Also the sanity check at the end of super_90_load should include level
1 as it used ->size too. (RAID0 and Linear don't use ->size at all).

Reported-by: Pim Zandbergen <P.Zandbergen@macroscoop.nl>
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

gro: reset vlan_tci on reuse

This one liner is part of upstream
commit 3701e51382a026cba10c60b03efabe534fba4ca4
Author: Jesse Gross <jesse@nicira.com>

    vlan: Centralize handling of hardware acceleration.

The bulk of that commit is a rework of the hardware assisted vlan tagging
driver interface, and as such doesn't classify for -stable inclusion. The fix
that is needed is a part of that commit but can work independently of the
rest.

This patch can avoid panics on the 2.6.32.y -stable kernels and is in the same
spirit as mainline commits
66c46d7 gro: Reset dev pointer on reuse
6d152e2 gro: reset skb_iif on reuse
which are already in -stable.

For drivers using the vlan_gro_frags() interface, a packet with an invalid tci
leads to GRO_DROP and napi_reuse_skb(). The skb has to be sanitized before
being reused or we may send an skb with an invalid vlan_tci field up the stack
where it is not expected.

Signed-off-by: Benjamin Poirier <bpoirier@suse.de>
Cc: Jesse Gross <jesse@nicira.com>
Acked-by: David S. Miller <davem@davemloft.net>
[PG: taken from v2.6.32.y stable, commit 5aff28abc7e]
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

cifs: fix cifs stable patch cifs-fix-oplock-break-handling-try-2.patch

commit 4708ad6374f07cdfb379c5d4100125e2cfd339d9 in v2.6.32.x stable

The stable release 2.6.32.32 added the upstream commit
12fed00de963433128b5366a21a55808fab2f756. However, one of the hunks of
the original patch seems missing from the stable backport which can be
found here:
   http://permalink.gmane.org/gmane.linux.kernel.stable/5676

This hunk corresponds to the change in is_valid_oplock_break() at
fs/cifs/misc.c.

This patch backports the missing hunk and is against
linux-2.6.32.y stable kernel.

Cc: Steve French <sfrench@us.ibm.com>
Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Suresh Jayaraman <sjayaraman@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
[PG: I incorrectly dropped the same hunk in v2.6.34.9-152-g0c55f20
 since the code in question was relocated/rewritten in e66673e39a ]
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

ALSA: hda: Use position_fix=1 for Acer Aspire 5538 to enable capture on internal mic

commit dd5a089edfa51a74692604b4b427953d8e16bc35 upstream.

BugLink: https://launchpad.net/bugs/685161
The reporter of the bug states that he must use position_fix=1 to enable
capture for the internal microphone, so set it for his machine's PCI
SSID.  Verified using 2.6.35 and the 2010-12-04 alsa-driver build.

Reported-and-tested-by: Ralph Wabel <rwabel@gmx.net>
Signed-off-by: Daniel T Chen <crimsun@ubuntu.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

ALSA: hda - ALSA HD Audio patch for Intel Panther Point DeviceIDs

commit d2edeb7c6f1dada8ca7d5c23e42d604e92ae0c76 upstream.

This patch adds the HD Audio Controller DeviceIDs for the Intel Panther Point PCH.

Signed-off-by: Seth Heasley <seth.heasley@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: hda - Reduce pci id list for Intel with class id

commit b686453543fd56332e8730a2abd7bf5bca756149 upstream.

Most of Intel controllers work as generic HD-audio without quirks,
and it'll be hopefully so in future.  Let's mark pci id with the
PCI_CLASS_MULTIMEDIA_HD_AUDIO for Intel so that the driver will work
with any new control chips in future.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

ALSA: hda - Add support for VMware controller

commit 0f0714c5ed0a98fdeaa2287d3b159989bbe6d842 upstream.

Add the new PCI ID 0x15ad and device ID 0x1977 for VMware HDAudio
Controller.

[changed to use AZX_DRIVER_GENERIC by tiwai]

Signed-off-by: Bankim Bhavsar <bbhavsar@vmware.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

ALSA: hda: add Vortex86MX PCI ids

commit e35d4b119578a054515ccb4ed5dddc4e8a81ec15 upstream.

Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

ALSA: hda_intel: ALSA HD Audio patch for Intel Patsburg DeviceIDs

commit cea310e8f8702226f982f09386cfd3c5793c5e2f upstream.

This patch adds the Intel Patsburg (PCH) HD Audio Controller DeviceIDs.

Signed-off-by: Seth Heasley <seth.heasley@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

time: Move ktime_t overflow checking into timespec_valid_strict

commit cee58483cf56e0ba355fdd97ff5e8925329aa936 upstream.

Andreas Bombe reported that the added ktime_t overflow checking added to
timespec_valid in commit 4e8b14526ca7 ("time: Improve sanity checking of
timekeeping inputs") was causing problems with X.org because it caused
timeouts larger then KTIME_T to be invalid.

Previously, these large timeouts would be clamped to KTIME_MAX and would
never expire, which is valid.

This patch splits the ktime_t overflow checking into a new
timespec_valid_strict function, and converts the timekeeping codes
internal checking to use this more strict function.

Reported-and-tested-by: Andreas Bombe <aeb@debian.org>
Cc: Zhouping Liu <zliu@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Linux Kernel <linux-kernel@vger.kernel.org>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

time: Avoid making adjustments if we haven't accumulated anything

commit bf2ac312195155511a0f79325515cbb61929898a upstream.

If update_wall_time() is called and the current offset isn't large
enough to accumulate, avoid re-calling timekeeping_adjust which may
change the clock freq and can cause 1ns inconsistencies with
CLOCK_REALTIME_COARSE/CLOCK_MONOTONIC_COARSE.

Signed-off-by: John Stultz <john.stultz@linaro.org>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Link: http://lkml.kernel.org/r/1345595449-34965-5-git-send-email-john.stultz@linaro.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Linux Kernel <linux-kernel@vger.kernel.org>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

time: Improve sanity checking of timekeeping inputs

commit 4e8b14526ca7fb046a81c94002c1c43b6fdf0e9b upstream.

Unexpected behavior could occur if the time is set to a value large
enough to overflow a 64bit ktime_t (which is something larger then the
year 2262).

Also unexpected behavior could occur if large negative offsets are
injected via adjtimex.

So this patch improves the sanity check timekeeping inputs by
improving the timespec_valid() check, and then makes better use of
timespec_valid() to make sure we don't set the time to an invalid
negative value or one that overflows ktime_t.

Note: This does not protect from setting the time close to overflowing
ktime_t and then letting natural accumulation cause the overflow.

Reported-by: CAI Qian <caiqian@redhat.com>
Reported-by: Sasha Levin <levinsasha928@gmail.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Zhouping Liu <zliu@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Link: http://lkml.kernel.org/r/1344454580-17031-1-git-send-email-john.stultz@linaro.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Linux Kernel <linux-kernel@vger.kernel.org>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

net: sock: validate data_len before allocating skb in sock_alloc_send_pskb()

commit cc9b17ad29ecaa20bfe426a8d4dbfb94b13ff1cc upstream.

We need to validate the number of pages consumed by data_len, otherwise frags
array could be overflowed by userspace. So this patch validate data_len and
return -EMSGSIZE when data_len may occupies more frags than MAX_SKB_FRAGS.

Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

Linux 2.6.34.13

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

dmi: Feed DMI table to /dev/random driver

commit d114a33387472555188f142ed8e98acdb8181c6d upstream.

Send the entire DMI (SMBIOS) table to the /dev/random driver to
help seed its pools.

Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

mfd: wm831x: Feed the device UUID into device_add_randomness()

commit 27130f0cc3ab97560384da437e4621fc4e94f21c upstream.

wm831x devices contain a unique ID value. Feed this into the newly added
device_add_randomness() to add some per device seed data to the pool.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

rtc: wm831x: Feed the write counter into device_add_randomness()

commit 9dccf55f4cb011a7552a8a2749a580662f5ed8ed upstream.

The tamper evident features of the RTC include the "write counter" which
is a pseudo-random number regenerated whenever we set the RTC. Since this
value is unpredictable it should provide some useful seeding to the random
number generator.

Only do this on boot since the goal is to seed the pool rather than add
useful entropy.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

random: Add comment to random_initialize()

commit cbc96b7594b5691d61eba2db8b2ea723645be9ca upstream.

Many platforms have per-machine instance data (serial numbers,
asset tags, etc.) squirreled away in areas that are accessed
during early system bringup. Mixing this data into the random
pools has a very high value in providing better random data,
so we should allow (and even encourage) architecture code to
call add_device_randomness() from the setup_arch() paths.

However, this limits our options for internal structure of
the random driver since random_initialize() is not called
until long after setup_arch().

Add a big fat comment to rand_initialize() spelling out
this requirement.

Suggested-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

random: remove rand_initialize_irq()

commit c5857ccf293968348e5eb4ebedc68074de3dcda6 upstream.

With the new interrupt sampling system, we are no longer using the
timer_rand_state structure in the irq descriptor, so we can stop
initializing it now.

[ Merged in fixes from Sedat to find some last missing references to
  rand_initialize_irq() ]

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Sedat Dilek <sedat.dilek@gmail.com>
[PG: in .34 the irqdesc.h content is in irq.h instead.]
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

net: feed /dev/random with the MAC address when registering a device

commit 7bf2357524408b97fec58344caf7397f8140c3fd upstream.

Cc: David Miller <davem@davemloft.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

usb: feed USB device information to the /dev/random driver

commit b04b3156a20d395a7faa8eed98698d1e17a36000 upstream.

Send the USB device's serial, product, and manufacturer strings to the
/dev/random driver to help seed its pools.

Cc: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Greg KH <greg@kroah.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

MAINTAINERS: Theodore Ts'o is taking over the random driver

commit 330e0a01d54c2b8606c56816f99af6ebc58ec92c upstream.

Matt Mackall stepped down as the /dev/random driver maintainer last
year, so Theodore Ts'o is taking back the /dev/random driver.

Cc: Matt Mackall <mpm@selenic.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

random: mix in architectural randomness in extract_buf()

commit d2e7c96af1e54b507ae2a6a7dd2baf588417a7e5 upstream.

Mix in any architectural randomness in extract_buf() instead of
xfer_secondary_buf().  This allows us to mix in more architectural
randomness, and it also makes xfer_secondary_buf() faster, moving a
tiny bit of additional CPU overhead to process which is extracting the
randomness.

[ Commit description modified by tytso to remove an extended
  advertisement for the RDRAND instruction. ]

Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: DJ Johnston <dj.johnston@intel.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

random: add tracepoints for easier debugging and verification

commit 00ce1db1a634746040ace24c09a4e3a7949a3145 upstream.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

random: add new get_random_bytes_arch() function

commit c2557a303ab6712bb6e09447df828c557c710ac9 upstream.

Create a new function, get_random_bytes_arch() which will use the
architecture-specific hardware random number generator if it is
present.  Change get_random_bytes() to not use the HW RNG, even if it
is avaiable.

The reason for this is that the hw random number generator is fast (if
it is present), but it requires that we trust the hardware
manufacturer to have not put in a back door.  (For example, an
increasing counter encrypted by an AES key known to the NSA.)

It's unlikely that Intel (for example) was paid off by the US
Government to do this, but it's impossible for them to prove otherwise
 --- especially since Bull Mountain is documented to use AES as a
whitener.  Hence, the output of an evil, trojan-horse version of
RDRAND is statistically indistinguishable from an RDRAND implemented
to the specifications claimed by Intel.  Short of using a tunnelling
electronic microscope to reverse engineer an Ivy Bridge chip and
disassembling and analyzing the CPU microcode, there's no way for us
to tell for sure.

Since users of get_random_bytes() in the Linux kernel need to be able
to support hardware systems where the HW RNG is not present, most
time-sensitive users of this interface have already created their own
cryptographic RNG interface which uses get_random_bytes() as a seed.
So it's much better to use the HW RNG to improve the existing random
number generator, by mixing in any entropy returned by the HW RNG into
/dev/random's entropy pool, but to always _use_ /dev/random's entropy
pool.

This way we get almost of the benefits of the HW RNG without any
potential liabilities.  The only benefits we forgo is the
speed/performance enhancements --- and generic kernel code can't
depend on depend on get_random_bytes() having the speed of a HW RNG
anyway.

For those places that really want access to the arch-specific HW RNG,
if it is available, we provide get_random_bytes_arch().

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

random: use the arch-specific rng in xfer_secondary_pool

commit e6d4947b12e8ad947add1032dd754803c6004824 upstream.

If the CPU supports a hardware random number generator, use it in
xfer_secondary_pool(), where it will significantly improve things and
where we can afford it.

Also, remove the use of the arch-specific rng in
add_timer_randomness(), since the call is significantly slower than
get_cycles(), and we're much better off using it in
xfer_secondary_pool() anyway.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

random: create add_device_randomness() interface

commit a2080a67abe9e314f9e9c2cc3a4a176e8a8f8793 upstream.

Add a new interface, add_device_randomness() for adding data to the
random pool that is likely to differ between two devices (or possibly
even per boot).  This would be things like MAC addresses or serial
numbers, or the read-out of the RTC. This does *not* add any actual
entropy to the pool, but it initializes the pool to different values
for devices that might otherwise be identical and have very little
entropy available to them (particularly common in the embedded world).

[ Modified by tytso to mix in a timestamp, since there may be some
  variability caused by the time needed to detect/configure the hardware
  in question. ]

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

random: use lockless techniques in the interrupt path

commit 902c098a3663de3fa18639efbb71b6080f0bcd3c upstream.

The real-time Linux folks don't like add_interrupt_randomness() taking
a spinlock since it is called in the low-level interrupt routine.
This also allows us to reduce the overhead in the fast path, for the
random driver, which is the interrupt collection path.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

random: make 'add_interrupt_randomness()' do something sane

commit 775f4b297b780601e61787b766f306ed3e1d23eb upstream.

We've been moving away from add_interrupt_randomness() for various
reasons: it's too expensive to do on every interrupt, and flooding the
CPU with interrupts could theoretically cause bogus floods of entropy
from a somewhat externally controllable source.

This solves both problems by limiting the actual randomness addition
to just once a second or after 64 interrupts, whicever comes first.
During that time, the interrupt cycle data is buffered up in a per-cpu
pool.  Also, we make sure the the nonblocking pool used by urandom is
initialized before we start feeding the normal input pool.  This
assures that /dev/urandom is returning unpredictable data as soon as
possible.

(Based on an original patch by Linus, but significantly modified by
tytso.)

Tested-by: Eric Wustrow <ewust@umich.edu>
Reported-by: Eric Wustrow <ewust@umich.edu>
Reported-by: Nadia Heninger <nadiah@cs.ucsd.edu>
Reported-by: Zakir Durumeric <zakir@umich.edu>
Reported-by: J. Alex Halderman <jhalderm@umich.edu>.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
[PG: minor adjustment required since .34 doesn't have f9e4989eb8
 which renames "status" to "random" in kernel/irq/handle.c ]
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

drivers/char/random.c: fix boot id uniqueness race

commit 44e4360fa3384850d65dd36fb4e6e5f2f112709b upstream.

/proc/sys/kernel/random/boot_id can be read concurrently by userspace
processes.  If two (or more) user-space processes concurrently read
boot_id when sysctl_bootid is not yet assigned, a race can occur making
boot_id differ between the reads.  Because the whole point of the boot id
is to be unique across a kernel execution, fix this by protecting this
operation with a spinlock.

Given that this operation is not frequently used, hitting the spinlock
on each call should not be an issue.

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Matt Mackall <mpm@selenic.com>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Greg Kroah-Hartman <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

random: Adjust the number of loops when initializing

commit 2dac8e54f988ab58525505d7ef982493374433c3 upstream.

When we are initializing using arch_get_random_long() we only need to
loop enough times to touch all the bytes in the buffer; using
poolwords for that does twice the number of operations necessary on a
64-bit machine, since in the random number generator code "word" means
32 bits.

Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Link: http://lkml.kernel.org/r/1324589281-31931-1-git-send-email-tytso@mit.edu
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

random: Use arch-specific RNG to initialize the entropy store

commit 3e88bdff1c65145f7ba297ccec69c774afe4c785 upstream.

If there is an architecture-specific random number generator (such as
RDRAND for Intel architectures), use it to initialize /dev/random's
entropy stores.  Even in the worst case, if RDRAND is something like
AES(NSA_KEY, counter++), it won't hurt, and it will definitely help
against any other adversaries.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Link: http://lkml.kernel.org/r/1324589281-31931-1-git-send-email-tytso@mit.edu
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

random: Use arch_get_random_int instead of cycle counter if avail

commit cf833d0b9937874b50ef2867c4e8badfd64948ce upstream.

We still don't use rdrand in /dev/random, which just seems stupid. We
accept the *cycle*counter* as a random input, but we don't accept
rdrand? That's just broken.

Sure, people can do things in user space (write to /dev/random, use
rdrand in addition to /dev/random themselves etc etc), but that
*still* seems to be a particularly stupid reason for saying "we
shouldn't bother to try to do better in /dev/random".

And even if somebody really doesn't trust rdrand as a source of random
bytes, it seems singularly stupid to trust the cycle counter *more*.

So I'd suggest the attached patch. I'm not going to even bother
arguing that we should add more bits to the entropy estimate, because
that's not the point - I don't care if /dev/random fills up slowly or
not, I think it's just stupid to not use the bits we can get from
rdrand and mix them into the strong randomness pool.

Link: http://lkml.kernel.org/r/CA%2B55aFwn59N1=m651QAyTy-1gO1noGbK18zwKDwvwqnravA84A@mail.gmail.com
Acked-by: "David S. Miller" <davem@davemloft.net>
Acked-by: "Theodore Ts'o" <tytso@mit.edu>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

fix typo/thinko in get_random_bytes()

commit bd29e568a4cb6465f6e5ec7c1c1f3ae7d99cbec1 upstream.

If there is an architecture-specific random number generator we use it
to acquire randomness one "long" at a time.  We should put these random
words into consecutive words in the result buffer - not just overwrite
the first word again and again.

Signed-off-by: Tony Luck <tony.luck@intel.com>
Acked-by: H. Peter Anvin <hpa@zytor.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

x86, random: Architectural inlines to get random integers with RDRAND

commit 628c6246d47b85f5357298601df2444d7f4dd3fd upstream.

Architectural inlines to get random ints and longs using the RDRAND
instruction.

Intel has introduced a new RDRAND instruction, a Digital Random Number
Generator (DRNG), which is functionally an high bandwidth entropy
source, cryptographic whitener, and integrity monitor all built into
hardware.  This enables RDRAND to be used directly, bypassing the
kernel random number pool.

For technical documentation, see:

http://software.intel.com/en-us/articles/download-the-latest-bull-mountain-software-implementation-guide/

In this patch, this is *only* used for the nonblocking random number
pool.  RDRAND is a nonblocking source, similar to our /dev/urandom,
and is therefore not a direct replacement for /dev/random.  The
architectural hooks presented in the previous patch only feed the
kernel internal users, which only use the nonblocking pool, and so
this is not a problem.

Since this instruction is available in userspace, there is no reason
to have a /dev/hw_rng device driver for the purpose of feeding rngd.
This is especially so since RDRAND is a nonblocking source, and needs
additional whitening and reduction (see the above technical
documentation for details) in order to be of "pure entropy source"
quality.

The CONFIG_EXPERT compile-time option can be used to disable this use
of RDRAND.

Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Originally-by: Fenghua Yu <fenghua.yu@intel.com>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

random: Add support for architectural random hooks

commit 63d77173266c1791f1553e9e8ccea65dc87c4485 upstream.

Add support for architecture-specific hooks into the kernel-directed
random number generator interfaces.  This patchset does not use the
architecture random number generator interfaces for the
userspace-directed interfaces (/dev/random and /dev/urandom), thus
eliminating the need to distinguish between them based on a pool
pointer.

Changes in version 3:
- Moved the hooks from extract_entropy() to get_random_bytes().
- Changes the hooks to inlines.

Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "Theodore Ts'o" <tytso@mit.edu>
[PG: .34 already had "unsigned int ret" in get_random_int, so the
 diffstat here is slightly smaller than that of 63d7717. ]
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

x86, cpufeature: Update CPU feature RDRND to RDRAND

commit 7ccafc5f75c87853f3c49845d5a884f2376e03ce upstream.

The Intel manual changed the name of the CPUID bit to match the
instruction name. We should follow suit for sanity's sake. (See Intel SDM
Volume 2, Table 3-20 "Feature Information Returned in the ECX Register".)

[ hpa: we can only do this at this time because there are currently no CPUs
  with this feature on the market, hence this is pre-hardware enabling.
  However, Cc:'ing stable so that stable can present a consistent ABI. ]

Signed-off-by: Kees Cook <kees.cook@canonical.com>
Link: http://lkml.kernel.org/r/20110524232926.GA27728@outflux.net
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

x86, cpu: Add CPU flags for F16C and RDRND

commit 24da9c26f3050aee9314ec09930a24c80fe76352 upstream.

Add support for the newly documented F16C (16-bit floating point
conversions) and RDRND (RDRAND instruction) CPU feature flags.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

random: simplify fips mode

commit e954bc91bdd4bb08b8325478c5004b24a23a3522 upstream.

Rather than dynamically allocate 10 bytes, move it to static allocation.
This saves space and avoids the need for error checking.

Signed-off-by: Matt Mackall <mpm@selenic.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
[PG: adding this simplifies required updates to random for .34 stable]
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

USB: quirks: adding more quirky webcams to avoid squeaky audio

commit 0d145d7d4a241c321c832a810bb6edad18e2217b upstream.

The following patch contains additional affected webcam models, on top of the
patches commited to linux-next 2394d67e446bf616a0885167d5f0d397bdacfdfc
and 5b253d88cc6c65a23cefc457a5a4ef139913c5fc

Signed-off-by: sordna <sordna@gmail.com>
Cc: Oliver Neukum <oliver@neukum.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

USB: add quirk for Logitech C600 web cam

commit 60c71ca972a2dd3fd9d0165b405361c8ad48349b upstream.

We've had another report of the "chipmunk" sound on a Logitech C600 webcam.
This patch resolves the issue.

Signed-off-by: Josh Boyer <jwboyer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

usb-storage: Accept 8020i-protocol commands longer than 12 bytes

commit 2f640bf4c94324aeaa1b6385c10aab8c5ad1e1cf upstream.

The 8020i protocol (also 8070i and QIC-157) uses 12-byte commands;
shorter commands must be padded.  Simon Detheridge reports that his
3-TB USB disk drive claims to use the 8020i protocol (which is
normally meant for ATAPI devices like CD drives), and because of its
large size, the disk drive requires the use of 16-byte commands.
However the usb_stor_pad12_command() routine in usb-storage always
sets the command length to 12, making the drive impossible to use.

Since the SFF-8020i specification allows for 16-byte commands in
future extensions, we may as well accept them.  This patch (as1490)
changes usb_stor_pad12_command() to leave commands larger than 12
bytes alone rather than truncating them.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Tested-by: Simon Detheridge <simon@widgit.com>
CC: Matthew Dharm <mdharm-usb@one-eyed-alien.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

USB: ftdi_sio: fix initial baud rate

commit 108e02b12921078a59dcacd048079ece48a4a983 upstream.

Fix regression introduced by commit b1ffb4c851f1 ("USB: Fix Corruption
issue in USB ftdi driver ftdi_sio.c") which caused the termios settings
to no longer be initialised at open. Consequently it was no longer
possible to set the port to the default speed of 9600 baud without first
changing to another baud rate and back again.

Reported-by: Roland Ramthun <mail@roland-ramthun.de>
Signed-off-by: Johan Hovold <jhovold@gmail.com>
Tested-by: Roland Ramthun <mail@roland-ramthun.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

USB: Fix Corruption issue in USB ftdi driver ftdi_sio.c

commit b1ffb4c851f185e9051ba837c16d9b84ef688d26 upstream.

Fix for ftdi_set_termios() glitching output

ftdi_set_termios() is constantly setting the baud rate, data bits and parity
unnecessarily on every call, . When called while characters are being
transmitted can cause the FTDI chip to corrupt the serial port bit stream
output by stalling the output half a bit during the output of a character.
Simple fix by skipping this setting if the baud rate/data bits/parity are
unchanged.

Signed-off-by: Andrew Worsley <amworsley@gmail.com>
----

  I had a brief run with strace on the getty and it was doing ioctl()s on
  each call but it didn't look relavant to the problem. I think the issue is
  that XON/XOFF flow control was being implmented via hardware - for the ixoff
  to allow the user to use XON/XOFF to control output. Unfortunately it would
  send 3 Control URBs updating all of the settings after each piece of input

  I am trying to work around the issue of gmail messing with the tab/spacing
  by submitting via SMTP via gmail which I believe should fix the issue.

  The patch is against v3.2-rc2 and compiles - but no additional testing in
  this kernel has been done.

  Thanks

   Andrew

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

USB: serial: pl2303: rm duplicate id

commit 0c16595539b612fe948559433dda08ff96a8bdc7 upstream.

I get report from customer that his usb-serial
converter doesn't work well,it sometimes work,
but sometimes it doesn't.

The usb-serial converter's id:
vendor_id product_id
0x4348    0x5523

Then I search the usb-serial codes, and there are
two drivers announce support this device, pl2303
and ch341, commit 026dfaf1 cause it. Through many
times to test, ch341 works well with this device,
and pl2303 doesn't work quite often(it just work quite little).

ch341 works well with this device, so we doesn't
need pl2303 to support.I try to revert 026dfaf1 first,
but it failed. So I prepare this patch by hand to revert it.

Signed-off-by: Wang YanQing <Udknight@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

kbuild: Fix passing -Wno-* options to gcc 4.4+

commit 8417da6f2128008c431c7d130af6cd3d9079922e upstream.

Starting with 4.4, gcc will happily accept -Wno-<anything> in the
cc-option test and complain later when compiling a file that has some
other warning. This rather unexpected behavior is intentional as per
http://gcc.gnu.org/PR28322, so work around it by testing for support of
the opposite option (without the no-). Introduce a new Makefile function
cc-disable-warning that does this and update two uses of cc-option in
the toplevel Makefile.

Reported-and-tested-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

mm: vmalloc: check for page allocation failure before vmlist insertion

commit 1368edf0647ac112d8cfa6ce47257dc950c50f5c upstream.

Commit f5252e00 ("mm: avoid null pointer access in vm_struct via
/proc/vmallocinfo") adds newly allocated vm_structs to the vmlist after
it is fully initialised.  Unfortunately, it did not check that
__vmalloc_area_node() successfully populated the area.  In the event of
allocation failure, the vmalloc area is freed but the pointer to freed
memory is inserted into the vmlist leading to a a crash later in
get_vmalloc_info().

This patch adds a check for ____vmalloc_area_node() failure within
__vmalloc_node_range.  It does not use "goto fail" as in the previous
error path as a warning was already displayed by __vmalloc_area_node()
before it called vfree in its failure path.

Credit goes to Luciano Chavez for doing all the real work of identifying
exactly where the problem was.

Signed-off-by: Mel Gorman <mgorman@suse.de>
Reported-by: Luciano Chavez <lnx1138@linux.vnet.ibm.com>
Tested-by: Luciano Chavez <lnx1138@linux.vnet.ibm.com>
Reviewed-by: Rik van Riel <riel@redhat.com>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

mm: avoid null pointer access in vm_struct via /proc/vmallocinfo

commit f5252e009d5b87071a919221e4f6624184005368 upstream.

The /proc/vmallocinfo shows information about vmalloc allocations in
vmlist that is a linklist of vm_struct.  It, however, may access pages
field of vm_struct where a page was not allocated.  This results in a null
pointer access and leads to a kernel panic.

Why this happens: In __vmalloc_node_range() called from vmalloc(), newly
allocated vm_struct is added to vmlist at __get_vm_area_node() and then,
some fields of vm_struct such as nr_pages and pages are set at
__vmalloc_area_node().  In other words, it is added to vmlist before it is
fully initialized.  At the same time, when the /proc/vmallocinfo is read,
it accesses the pages field of vm_struct according to the nr_pages field
at show_numa_info().  Thus, a null pointer access happens.

The patch adds the newly allocated vm_struct to the vmlist *after* it is
fully initialized.  So, it can avoid accessing the pages field with
unallocated page when show_numa_info() is called.

Signed-off-by: Mitsuo Hayasaka <mitsuo.hayasaka.hu@hitachi.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
[PG: .34 has VMALLOC_START/END vs. start/end in f5252e009d5]
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

drm/i915: Rephrase pwrite bounds checking to avoid any potential overflow

commit 7dcd2499deab8f10011713c40bc2f309c9b65077 upstream.

... and do the same for pread.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

drm/i915: Sanity check pread/pwrite

commit ce9d419dbecc292cc3e06e8b1d6d123d3fa813a4 upstream.

Move the access control up from the fast paths, which are no longer
universally taken first, up into the caller. This then duplicates some
sanity checking along the slow paths, but is much simpler.
Tracked as CVE-2010-2962.

Reported-by: Kees Cook <kees@ubuntu.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

[media] Remove the old V4L1 v4lgrab.c file

commit 55fe25b418640fad04190103274841b2c907bacd upstream.

This example file uses the old V4L1 API. It also doesn't use libv4l.
So, it is completely obsolete. A good example already exists at
v4l-utils (v4l2grab.c):
http://git.linuxtv.org/v4l-utils.git

Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

md/raid5: abort any pending parity operations when array fails.

commit 9a3f530f39f4490eaa18b02719fb74ce5f4d2d86 upstream.

When the number of failed devices exceeds the allowed number
we must abort any active parity operations (checks or updates) as they
are no longer meaningful, and can lead to a BUG_ON in
handle_parity_checks6.

This bug was introduce by commit 6c0069c0ae9659e3a91b68eaed06a5c6c37f45c8
in 2.6.29.

Reported-by: Manish Katiyar <mkatiyar@gmail.com>
Tested-by: Manish Katiyar <mkatiyar@gmail.com>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
[PG: use 2.6.32.49 backport since raid5.c @ 9a3f530f/v3.2 differs more]
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

kbuild: Disable -Wunused-but-set-variable for gcc 4.6.0

commit af0e5d565d2fffcd97d1e2d89669d627cc04e8b8 upstream.

Disable the new -Wunused-but-set-variable that was added in gcc 4.6.0
It produces more false positives than useful warnings.

This can still be enabled using W=1

Signed-off-by: Dave Jones <davej@redhat.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Tested-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

kbuild: implement several W= levels

commit 28bc20dccadc610c56e27255aeef2938141a0cd3 upstream.

Building a kernel with "make W=1" produces far too much noise to be
useful.

Divide the warning options in three groups:

    W=1 - warnings that may be relevant and does not occur too often
    W=2 - warnings that occur quite often but may still be relevant
    W=3 - the more obscure warnings, can most likely be ignored

When building the whole kernel, those levels produce:

W=1 - 4859 warnings
W=2 - 1394 warnings
W=3 - 86666 warnings

respectively. Warnings have been counted with Geert's script at

http://www.kernel.org/pub/linux/kernel/people/geert/linux-log/linux-log-summary.pl

Many warnings occur from .h files so fixing one file may have a nice
effect on the total number of warnings.

With these changes I am actually tempted to try W=1 now and then.
Previously there was just too much noise.

Borislav:

- make the W= levels exclusive
- move very noisy and making little sense for the kernel warnings to W=3
- drop -Woverlength-strings due to useless warning message
- copy explanatory text for the different warning levels to 'make help'
- recount warnings per level

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Borislav Petkov <bp@alien8.de>
Cc: Dave Jones <davej@redhat.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
[PG: used for 2.6.34 to better control new compilers on older code]
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

kbuild: Add extra gcc checks

commit 4a5838ad9d2d4f7354a310982483f4c76aa0abeb upstream.

Add a 'W=1' Makefile switch which adds additional checking per build
object.

The idea behind this option is targeted at developers who, in the
process of writing their code, want to do the occasional

make W=1 [target.o]

and let gcc do more extensive code checking for them. Then, they
could eyeball the output for valid gcc warnings about various
bugs/discrepancies which are not reported during the normal build
process.

For more background information and a use case, read through this
thread: http://marc.info/?l=kernel-janitors&m=129802065918147&w=2

Cc: Michal Marek <mmarek@suse.cz>
Cc: linux-kbuild@vger.kernel.org
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Michal Marek <mmarek@suse.cz>
[PG: used for 2.6.34 to better control new compilers on older code]
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

hfs: add sanity check for file name length

commit bc5b8a9003132ae44559edd63a1623b7b99dfb68 upstream.

On a corrupted file system the ->len field could be wrong leading to
a buffer overflow.

Reported-and-acked-by: Clement LECIGNE <clement.lecigne@netasq.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

PM / Suspend: Off by one in pm_suspend()

commit 528f7ce6e439edeac38f6b3f8561f1be129b5e91 upstream.

In enter_state() we use "state" as an offset for the pm_states[]
array.  The pm_states[] array only has PM_SUSPEND_MAX elements so
this test is off by one.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

mtd: mtdchar: add missing initializer on raw write

commit bf5140817b2d65faac9b32fc9057a097044ac35b upstream.

On writes in MODE_RAW the mtd_oob_ops struct is not sufficiently
initialized which may cause nandwrite to fail. With this patch
it is possible to write raw nand/oob data without additional ECC
(either for testing or when some sectors need different oob layout
e.g. bootloader) like
nandwrite  -n -r -o  /dev/mtd0 <myfile>

Signed-off-by: Peter Wippich <pewi@gw-instruments.de>
Tested-by: Ricard Wanderlof <ricardw@axis.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

netlink: validate NLA_MSECS length

commit c30bc94758ae2a38a5eb31767c1985c0aae0950b upstream.

L2TP for example uses NLA_MSECS like this:
policy:
        [L2TP_ATTR_RECV_TIMEOUT]        = { .type = NLA_MSECS, },
code:
        if (info->attrs[L2TP_ATTR_RECV_TIMEOUT])
                cfg.reorder_timeout = nla_get_msecs(info->attrs[L2TP_ATTR_RECV_TIMEOUT]);

As nla_get_msecs() is essentially nla_get_u64() plus the
conversion to a HZ-based value, this will not properly
reject attributes from userspace that aren't long enough
and might overrun the message.

Add NLA_MSECS to the attribute minlen array to check the
size properly.

Cc: Thomas Graf <tgraf@suug.ch>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

NFS/sunrpc: don't use a credential with extra groups.

commit dc6f55e9f8dac4b6479be67c5c9128ad37bb491f upstream.

The sunrpc layer keeps a cache of recently used credentials and
'unx_match' is used to find the credential which matches the current
process.

However unx_match allows a match when the cached credential has extra
groups at the end of uc_gids list which are not in the process group list.

So if a process with a list of (say) 4 group accesses a file and gains
access because of the last group in the list, then another process
with the same uid and gid, and a gid list being the first tree of the
gids of the original process tries to access the file, it will be
granted access even though it shouldn't as the wrong rpc credential
will be used.

Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

[SCSI] Make scsi_free_queue() kill pending SCSI commands

commit 3308511c93e6ad0d3c58984ecd6e5e57f96b12c8 upstream.

Make sure that SCSI device removal via scsi_remove_host() does finish
all pending SCSI commands. Currently that's not the case and hence
removal of a SCSI host during I/O can cause a deadlock. See also
"blkdev_issue_discard() hangs forever if underlying storage device is
removed" (http://bugzilla.kernel.org/show_bug.cgi?id=40472). See also
http://lkml.org/lkml/2011/8/27/6.

Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

[SCSI] st: fix race in st_scsi_execute_end

commit c68bf8eeaa57c852e74adcf597237be149eef830 upstream.

The call to complete() in st_scsi_execute_end() wakes up sleeping thread
in write_behind_check(), which frees the st_request, thus invalidating
the pointer to the associated bio structure, which is then passed to the
blk_rq_unmap_user(). Fix by storing pointer to bio structure into
temporary local variable.

This bug is present since at least linux-2.6.32.

Signed-off-by: Petr Uzel <petr.uzel@suse.cz>
Reported-by: Juergen Groß <juergen.gross@ts.fujitsu.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Acked-by: Kai Mäkisara <kai.makisara@kolumbus.fi>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

timekeeping: Add missing update call in timekeeping_resume()

commit 3e997130bd2e8c6f5aaa49d6e3161d4d29b43ab0 upstream.

The leap second rework unearthed another issue of inconsistent data.

On timekeeping_resume() the timekeeper data is updated, but nothing
calls timekeeping_update(), so now the update code in the timer
interrupt sees stale values.

This has been the case before those changes, but then the timer
interrupt was using stale data as well so this went unnoticed for quite
some time.

Add the missing update call, so all the data is consistent everywhere.

Reported-by: Andreas Schwab <schwab@linux-m68k.org>
Reported-and-tested-by: "Rafael J. Wysocki" <rjw@sisk.pl>
Reported-and-tested-by: Martin Steigerwald <Martin@lichtvoll.de>
Cc: LKML <linux-kernel@vger.kernel.org>
Cc: Linux PM list <linux-pm@vger.kernel.org>
Cc: John Stultz <johnstul@us.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>,
Cc: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: John Stultz <johnstul@us.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Linux Kernel <linux-kernel@vger.kernel.org>
Signed-off-by: John Stultz <johnstul@us.ibm.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

hrtimer: Update hrtimer base offsets each hrtimer_interrupt

commit 5baefd6d84163443215f4a99f6a20f054ef11236 upstream.

The update of the hrtimer base offsets on all cpus cannot be made
atomically from the timekeeper.lock held and interrupt disabled region
as smp function calls are not allowed there.

clock_was_set(), which enforces the update on all cpus, is called
either from preemptible process context in case of do_settimeofday()
or from the softirq context when the offset modification happened in
the timer interrupt itself due to a leap second.

In both cases there is a race window for an hrtimer interrupt between
dropping timekeeper lock, enabling interrupts and clock_was_set()
issuing the updates. Any interrupt which arrives in that window will
see the new time but operate on stale offsets.

So we need to make sure that an hrtimer interrupt always sees a
consistent state of time and offsets.

ktime_get_update_offsets() allows us to get the current monotonic time
and update the per cpu hrtimer base offsets from hrtimer_interrupt()
to capture a consistent state of monotonic time and the offsets. The
function replaces the existing ktime_get() calls in hrtimer_interrupt().

The overhead of the new function vs. ktime_get() is minimal as it just
adds two store operations.

This ensures that any changes to realtime or boottime offsets are
noticed and stored into the per-cpu hrtimer base structures, prior to
any hrtimer expiration and guarantees that timers are not expired early.

Signed-off-by: John Stultz <johnstul@us.ibm.com>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Prarit Bhargava <prarit@redhat.com>
Link: http://lkml.kernel.org/r/1341960205-56738-8-git-send-email-johnstul@us.ibm.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Linux Kernel <linux-kernel@vger.kernel.org>
Signed-off-by: John Stultz <johnstul@us.ibm.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

timekeeping: Provide hrtimer update function

commit f6c06abfb3972ad4914cef57d8348fcb2932bc3b upstream.

To finally fix the infamous leap second issue and other race windows
caused by functions which change the offsets between the various time
bases (CLOCK_MONOTONIC, CLOCK_REALTIME and CLOCK_BOOTTIME) we need a
function which atomically gets the current monotonic time and updates
the offsets of CLOCK_REALTIME and CLOCK_BOOTTIME with minimalistic
overhead. The previous patch which provides ktime_t offsets allows us
to make this function almost as cheap as ktime_get() which is going to
be replaced in hrtimer_interrupt().

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: John Stultz <johnstul@us.ibm.com>
Link: http://lkml.kernel.org/r/1341960205-56738-7-git-send-email-johnstul@us.ibm.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Linux Kernel <linux-kernel@vger.kernel.org>
Signed-off-by: John Stultz <johnstul@us.ibm.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

hrtimers: Move lock held region in hrtimer_interrupt()

commit 196951e91262fccda81147d2bcf7fdab08668b40 upstream.

We need to update the base offsets from this code and we need to do
that under base->lock. Move the lock held region around the
ktime_get() calls. The ktime_get() calls are going to be replaced with
a function which gets the time and the offsets atomically.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: John Stultz <johnstul@us.ibm.com>
Link: http://lkml.kernel.org/r/1341960205-56738-6-git-send-email-johnstul@us.ibm.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Linux Kernel <linux-kernel@vger.kernel.org>
Signed-off-by: John Stultz <johnstul@us.ibm.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

timekeeping: Maintain ktime_t based offsets for hrtimers

commit 5b9fe759a678e05be4937ddf03d50e950207c1c0 upstream.

We need to update the hrtimer clock offsets from the hrtimer interrupt
context. To avoid conversions from timespec to ktime_t maintain a
ktime_t based representation of those offsets in the timekeeper. This
puts the conversion overhead into the code which updates the
underlying offsets and provides fast accessible values in the hrtimer
interrupt.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: John Stultz <johnstul@us.ibm.com>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Prarit Bhargava <prarit@redhat.com>
Link: http://lkml.kernel.org/r/1341960205-56738-4-git-send-email-johnstul@us.ibm.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Linux Kernel <linux-kernel@vger.kernel.org>
Signed-off-by: John Stultz <johnstul@us.ibm.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

timekeeping: Fix leapsecond triggered load spike issue

commit 4873fa070ae84a4115f0b3c9dfabc224f1bc7c51 upstream.

The timekeeping code misses an update of the hrtimer subsystem after a
leap second happened. Due to that timers based on CLOCK_REALTIME are
either expiring a second early or late depending on whether a leap
second has been inserted or deleted until an operation is initiated
which causes that update. Unless the update happens by some other
means this discrepancy between the timekeeping and the hrtimer data
stays forever and timers are expired either early or late.

The reported immediate workaround - $ data -s "`date`" - is causing a
call to clock_was_set() which updates the hrtimer data structures.
See: http://www.sheeri.com/content/mysql-and-leap-second-high-cpu-and-fix

Add the missing clock_was_set() call to update_wall_time() in case of
a leap second event. The actual update is deferred to softirq context
as the necessary smp function call cannot be invoked from hard
interrupt context.

Signed-off-by: John Stultz <johnstul@us.ibm.com>
Reported-by: Jan Engelhardt <jengelh@inai.de>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Prarit Bhargava <prarit@redhat.com>
Link: http://lkml.kernel.org/r/1341960205-56738-3-git-send-email-johnstul@us.ibm.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Linux Kernel <linux-kernel@vger.kernel.org>
Signed-off-by: John Stultz <johnstul@us.ibm.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

hrtimer: Provide clock_was_set_delayed()

commit f55a6faa384304c89cfef162768e88374d3312cb upstream.

clock_was_set() cannot be called from hard interrupt context because
it calls on_each_cpu().

For fixing the widely reported leap seconds issue it is necessary to
call it from hard interrupt context, i.e. the timer tick code, which
does the timekeeping updates.

Provide a new function which denotes it in the hrtimer cpu base
structure of the cpu on which it is called and raise the hrtimer
softirq. We then execute the clock_was_set() notificiation from
softirq context in run_hrtimer_softirq(). The hrtimer softirq is
rarely used, so polling the flag there is not a performance issue.

[ tglx: Made it depend on CONFIG_HIGH_RES_TIMERS. We really should get
  rid of all this ifdeffery ASAP ]

Signed-off-by: John Stultz <johnstul@us.ibm.com>
Reported-by: Jan Engelhardt <jengelh@inai.de>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Prarit Bhargava <prarit@redhat.com>
Link: http://lkml.kernel.org/r/1341960205-56738-2-git-send-email-johnstul@us.ibm.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Linux Kernel <linux-kernel@vger.kernel.org>
Signed-off-by: John Stultz <johnstul@us.ibm.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

time: Move common updates to a function

commit cc06268c6a87db156af2daed6e96a936b955cc82 upstream.

While not a bugfix itself, it allows following fixes to backport
in a more straightforward manner.

CC: Thomas Gleixner <tglx@linutronix.de>
CC: Eric Dumazet <eric.dumazet@gmail.com>
CC: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Linux Kernel <linux-kernel@vger.kernel.org>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

timekeeping: Fix CLOCK_MONOTONIC inconsistency during leapsecond

commit fad0c66c4bb836d57a5f125ecd38bed653ca863a upstream.
which resolves a bug the previous commit.

Commit 6b43ae8a61 (ntp: Fix leap-second hrtimer livelock) broke the
leapsecond update of CLOCK_MONOTONIC. The missing leapsecond update to
wall_to_monotonic causes discontinuities in CLOCK_MONOTONIC.

Adjust wall_to_monotonic when NTP inserted a leapsecond.

Reported-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Tested-by: Richard Cochran <richardcochran@gmail.com>
Link: http://lkml.kernel.org/r/1338400497-12420-1-git-send-email-john.stultz@linaro.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Linux Kernel <linux-kernel@vger.kernel.org>
Signed-off-by: John Stultz <johnstul@us.ibm.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

ntp: Fix STA_INS/DEL clearing bug

commit 6b1859dba01c7d512b72d77e3fd7da8354235189 upstream.

In commit 6b43ae8a619d17c4935c3320d2ef9e92bdeed05d, I
introduced a bug that kept the STA_INS or STA_DEL bit
from being cleared from time_status via adjtimex()
without forcing STA_PLL first.

Usually once the STA_INS is set, it isn't cleared
until the leap second is applied, so its unlikely this
affected anyone. However during testing I noticed it
took some effort to cancel a leap second once STA_INS
was set.

Signed-off-by: John Stultz <johnstul@us.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Link: http://lkml.kernel.org/r/1342156917-25092-2-git-send-email-john.stultz@linaro.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

ntp: Correct TAI offset during leap second

commit dd48d708ff3e917f6d6b6c2b696c3f18c019feed upstream.

When repeating a UTC time value during a leap second (when the UTC
time should be 23:59:60), the TAI timescale should not stop. The kernel
NTP code increments the TAI offset one second too late. This patch fixes
the issue by incrementing the offset during the leap second itself.

Signed-off-by: Richard Cochran <richardcochran@gmail.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Linux Kernel <linux-kernel@vger.kernel.org>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

ntp: Fix leap-second hrtimer livelock

commit 6b43ae8a619d17c4935c3320d2ef9e92bdeed05d upstream.

This should have been backported when it was commited, but I
mistook the problem as requiring the ntp_lock changes
that landed in 3.4 in order for it to occur.

Unfortunately the same issue can happen (with only one cpu)
as follows:
do_adjtimex()
 write_seqlock_irq(&xtime_lock);
  process_adjtimex_modes()
   process_adj_status()
    ntp_start_leap_timer()
     hrtimer_start()
      hrtimer_reprogram()
       tick_program_event()
        clockevents_program_event()
         ktime_get()
          seq = req_seqbegin(xtime_lock); [DEADLOCK]

This deadlock will no always occur, as it requires the
leap_timer to force a hrtimer_reprogram which only happens
if its set and there's no sooner timer to expire.

NOTE: This patch, being faithful to the original commit,
introduces a bug (we don't update wall_to_monotonic),
which will be resovled by backporting a following fix.

Original commit message below:

Since commit 7dffa3c673fbcf835cd7be80bb4aec8ad3f51168 the ntp
subsystem has used an hrtimer for triggering the leapsecond
adjustment. However, this can cause a potential livelock.

Thomas diagnosed this as the following pattern:
CPU 0                                                    CPU 1
do_adjtimex()
  spin_lock_irq(&ntp_lock);
    process_adjtimex_modes();  timer_interrupt()
      process_adj_status();                                do_timer()
        ntp_start_leap_timer();                             write_lock(&xtime_lock);
          hrtimer_start();                                  update_wall_time();
             hrtimer_reprogram();                            ntp_tick_length()
               tick_program_event()                            spin_lock(&ntp_lock);
                 clockevents_program_event()
   ktime_get()
                     seq = req_seqbegin(xtime_lock);

This patch tries to avoid the problem by reverting back to not using
an hrtimer to inject leapseconds, and instead we handle the leapsecond
processing in the second_overflow() function.

The downside to this change is that on systems that support highres
timers, the leap second processing will occur on a HZ tick boundary,
(ie: ~1-10ms, depending on HZ)  after the leap second instead of
possibly sooner (~34us in my tests w/ x86_64 lapic).

This patch applies on top of tip/timers/core.

CC: Sasha Levin <levinsasha928@gmail.com>
CC: Thomas Gleixner <tglx@linutronix.de>
Reported-by: Sasha Levin <levinsasha928@gmail.com>
Diagnoised-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Sasha Levin <levinsasha928@gmail.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Linux Kernel <linux-kernel@vger.kernel.org>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

ACPI/AC: prevent OOPS on some boxes due to missing check power_supply_register() return value check

commit f197ac13f6eeb351b31250b9ab7d0da17434ea36 upstream.

In the ac.c, power_supply_register()'s return value is not checked.

As a result, the driver's add() ops may return success
even though the device failed to initialize.

For example, some BIOS may describe two ACADs in the same DSDT.
The second ACAD device will fail to register,
but ACPI driver's add() ops returns sucessfully.
The ACPI device will receive ACPI notification and cause OOPS.

https://bugzilla.redhat.com/show_bug.cgi?id=772730

Signed-off-by: Lan Tianyu <tianyu.lan@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

USB: Serial: Add PID(0xF7C0) to FTDI SIO driver for a zeitcontrol-device

commit ce7e9065958191e6b7ca49d7ed0e1099c486d198 upstream.

Here is a patch for a new PID (zeitcontrol-device mifare-reader FT232BL(like FT232BM but lead free)).

Signed-off-by: Artur Zimmer <artur128@3dzimmer.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

USB: Serial: Add device ID for Sierra Wireless MC8305

commit 2f1def2695c223b2aa325e5e47d0d64200a45d23 upstream.

A new device ID pair is added for Sierra Wireless MC8305.

Signed-off-by: Florian Echtler <floe@butterbrot.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

ext2,ext3,ext4: don't inherit APPEND_FL or IMMUTABLE_FL for new inodes

commit 1cd9f0976aa4606db8d6e3dc3edd0aca8019372a upstream.

This doesn't make much sense, and it exposes a bug in the kernel where
attempts to create a new file in an append-only directory using
O_CREAT will fail (but still leave a zero-length file).  This was
discovered when xfstests #79 was generalized so it could run on all
file systems.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

drivers/net/rionet.c: fix ethernet address macros for LE platforms

commit e0c87bd95e8dad455c23bc56513af8dcb1737e55 upstream.

Modify Ethernet addess macros to be compatible with BE/LE platforms

Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com>
Cc: Chul Kim <chul.kim@idt.com>
Cc: Kumar Gala <galak@kernel.crashing.org>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Li Yang <leoli@freescale.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

vm: fix vm_pgoff wrap in upward expansion

commit 42c36f63ac1366ab0ecc2d5717821362c259f517 upstream.

Commit a626ca6a6564 ("vm: fix vm_pgoff wrap in stack expansion") fixed
the case of an expanding mapping causing vm_pgoff wrapping when you had
downward stack expansion.  But there was another case where IA64 and
PA-RISC expand mappings: upward expansion.

This fixes that case too.

Signed-off-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
[PG: .34 doesn't have perf call via 3af9e859 (in .36); adjust accordingly]
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>