usb/ohci-platform: Fix a warning when hibernating

[ Upstream commit 1cb3b0095c3d0bb96912bfbbce4fc006d41f367c ]

The following warning was observed when attempting to suspend to disk
using a USB flash as a swap device.

[  111.779649] ------------[ cut here ]------------
[  111.788382] URB (____ptrval____) submitted while active
[  111.796646] WARNING: CPU: 3 PID: 365 at drivers/usb/core/urb.c:363 usb_submit_urb+0x3d8/0x590
[  111.805417] Modules linked in:
[  111.808584] CPU: 3 PID: 365 Comm: kworker/3:2 Not tainted 5.6.0-rc6-00002-gdfd1731f9a3e-dirty #545
[  111.817796] Hardware name: ARM Juno development board (r2) (DT)
[  111.823896] Workqueue: usb_hub_wq hub_event
[  111.828217] pstate: 60000005 (nZCv daif -PAN -UAO)
[  111.833156] pc : usb_submit_urb+0x3d8/0x590
[  111.837471] lr : usb_submit_urb+0x3d8/0x590
[  111.841783] sp : ffff800018de38b0
[  111.845205] x29: ffff800018de38b0 x28: 0000000000000003
[  111.850682] x27: ffff000970530b20 x26: ffff8000133fd000
[  111.856159] x25: ffff8000133fd000 x24: ffff800018de3b38
[  111.861635] x23: 0000000000000004 x22: 0000000000000c00
[  111.867112] x21: 0000000000000000 x20: 00000000fffffff0
[  111.872589] x19: ffff0009704e7a00 x18: ffffffffffffffff
[  111.878065] x17: 00000000a7c8f4bc x16: 000000002af33de8
[  111.883542] x15: ffff8000133fda88 x14: 0720072007200720
[  111.889019] x13: 0720072007200720 x12: 0720072007200720
[  111.894496] x11: 0000000000000000 x10: 00000000a5286134
[  111.899973] x9 : 0000000000000002 x8 : ffff000970c837a0
[  111.905449] x7 : 0000000000000000 x6 : ffff800018de3570
[  111.910926] x5 : 0000000000000001 x4 : 0000000000000003
[  111.916401] x3 : 0000000000000000 x2 : ffff800013427118
[  111.921879] x1 : 9d4e965b4b7d7c00 x0 : 0000000000000000
[  111.927356] Call trace:
[  111.929892]  usb_submit_urb+0x3d8/0x590
[  111.933852]  hub_activate+0x108/0x7f0
[  111.937633]  hub_resume+0xac/0x148
[  111.941149]  usb_resume_interface.isra.10+0x60/0x138
[  111.946265]  usb_resume_both+0xe4/0x140
[  111.950225]  usb_runtime_resume+0x24/0x30
[  111.954365]  __rpm_callback+0xdc/0x138
[  111.958236]  rpm_callback+0x34/0x98
[  111.961841]  rpm_resume+0x4a8/0x720
[  111.965445]  rpm_resume+0x50c/0x720
[  111.969049]  __pm_runtime_resume+0x4c/0xb8
[  111.973276]  usb_autopm_get_interface+0x28/0x60
[  111.977948]  hub_event+0x80/0x16d8
[  111.981466]  process_one_work+0x2a4/0x748
[  111.985604]  worker_thread+0x48/0x498
[  111.989387]  kthread+0x13c/0x140
[  111.992725]  ret_from_fork+0x10/0x18
[  111.996415] irq event stamp: 354
[  111.999756] hardirqs last  enabled at (353): [<ffff80001019ea1c>] console_unlock+0x504/0x5b8
[  112.008441] hardirqs last disabled at (354): [<ffff8000100a95d0>] do_debug_exception+0x1a8/0x258
[  112.017479] softirqs last  enabled at (350): [<ffff8000100818a4>] __do_softirq+0x4bc/0x568
[  112.025984] softirqs last disabled at (343): [<ffff8000101145a4>] irq_exit+0x144/0x150
[  112.034129] ---[ end trace dc96030b9cf6c8a3 ]---

The problem was tracked down to a missing call to
pm_runtime_set_active() on resume in ohci-platform.

Link: https://lore.kernel.org/lkml/20200323143857.db5zphxhq4hz3hmd@e107158-lin.cambridge.arm.com/
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Qais Yousef <qais.yousef@arm.com>
CC: Tony Prisk <linux@prisktech.co.nz>
CC: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
CC: Mathias Nyman <mathias.nyman@intel.com>
CC: Oliver Neukum <oneukum@suse.de>
CC: linux-arm-kernel@lists.infradead.org
CC: linux-usb@vger.kernel.org
CC: linux-kernel@vger.kernel.org
Link: https://lore.kernel.org/r/20200518154931.6144-1-qais.yousef@arm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

vfio-pci: Mask cap zero

[ Upstream commit bc138db1b96264b9c1779cf18d5a3b186aa90066 ]

The PCI Code and ID Assignment Specification changed capability ID 0
from reserved to a NULL capability in the v1.1 revision.  The NULL
capability is defined to include only the 16-bit capability header,
ie. only the ID and next pointer.  Unfortunately vfio-pci creates a
map of config space, where ID 0 is used to reserve the standard type
0 header.  Finding an actual capability with this ID therefore results
in a bogus range marked in that map and conflicts with subsequent
capabilities.  As this seems to be a dummy capability anyway and we
already support dropping capabilities, let's hide this one rather than
delving into the potentially subtle dependencies within our map.

Seen on an NVIDIA Tesla T4.

Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/ps3: Fix kexec shutdown hang

[ Upstream commit 126554465d93b10662742128918a5fc338cda4aa ]

The ps3_mm_region_destroy() and ps3_mm_vas_destroy() routines
are called very late in the shutdown via kexec's mmu_cleanup_all
routine.  By the time mmu_cleanup_all runs it is too late to use
udbg_printf, and calling it will cause PS3 systems to hang.

Remove all debugging statements from ps3_mm_region_destroy() and
ps3_mm_vas_destroy() and replace any error reporting with calls
to lv1_panic.

With this change builds with 'DEBUG' defined will not cause kexec
reboots to hang, and builds with 'DEBUG' defined or not will end
in lv1_panic if an error is encountered.

Signed-off-by: Geoff Levand <geoff@infradead.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/7325c4af2b4c989c19d6a26b90b1fec9c0615ddf.1589049250.git.geoff@infradead.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/pseries/ras: Fix FWNMI_VALID off by one

[ Upstream commit deb70f7a35a22dffa55b2c3aac71bc6fb0f486ce ]

This was discovered developing qemu fwnmi sreset support. This
off-by-one bug means the last 16 bytes of the rtas area can not
be used for a 16 byte save area.

It's not a serious bug, and QEMU implementation has to retain a
workaround for old kernels, but it's good to tighten it.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Acked-by: Mahesh Salgaonkar <mahesh@linux.ibm.com>
Link: https://lore.kernel.org/r/20200508043408.886394-7-npiggin@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

tty: n_gsm: Fix waking up upper tty layer when room available

[ Upstream commit 01dbb362f0a114fbce19c8abe4cd6f4710e934d5 ]

Warn the upper layer when n_gms is ready to receive data
again. Without this the associated virtual tty remains blocked
indefinitely.

Fixes: e1eaea46bb40 ("tty: n_gsm line discipline")
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Link: https://lore.kernel.org/r/20200512115323.1447922-4-gregory.clement@bootlin.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tty: n_gsm: Fix SOF skipping

[ Upstream commit 84d6f81c1fb58b56eba81ff0a36cf31946064b40 ]

For at least some modems like the TELIT LE910, skipping SOF makes
transfers blocking indefinitely after a short amount of data
transferred.

Given the small improvement provided by skipping the SOF (just one
byte on about 100 bytes), it seems better to completely remove this
"feature" than make it optional.

Fixes: e1eaea46bb40 ("tty: n_gsm line discipline")
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Link: https://lore.kernel.org/r/20200512115323.1447922-3-gregory.clement@bootlin.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: ti: composite: fix memory leak

[ Upstream commit c7c1cbbc9217ebb5601b88d138d4a5358548de9d ]

The parent_names is never released for a component clock definition,
causing some memory leak. Fix by releasing it once it is no longer
needed.

Reported-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Link: https://lkml.kernel.org/r/20200429131341.4697-2-t-kristo@ti.com
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dlm: remove BUG() before panic()

[ Upstream commit fe204591cc9480347af7d2d6029b24a62e449486 ]

Building a kernel with clang sometimes fails with an objtool error in dlm:

fs/dlm/lock.o: warning: objtool: revert_lock_pc()+0xbd: can't find jump dest instruction at .text+0xd7fc

The problem is that BUG() never returns and the compiler knows
that anything after it is unreachable, however the panic still
emits some code that does not get fully eliminated.

Having both BUG() and panic() is really pointless as the BUG()
kills the current process and the subsequent panic() never hits.
In most cases, we probably don't really want either and should
replace the DLM_ASSERT() statements with WARN_ON(), as has
been done for some of them.

Remove the BUG() here so the user at least sees the panic message
and we can reliably build randconfig kernels.

Fixes: e7fd41792fc0 ("[DLM] The core of the DLM for GFS2/CLVM")
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: clang-built-linux@googlegroups.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: mpt3sas: Fix double free warnings

[ Upstream commit cbbfdb2a2416c9f0cde913cf09670097ac281282 ]

Fix following warning from Smatch static analyser:

drivers/scsi/mpt3sas/mpt3sas_base.c:5256 _base_allocate_memory_pools()
warn: 'ioc->hpr_lookup' double freed

drivers/scsi/mpt3sas/mpt3sas_base.c:5256 _base_allocate_memory_pools()
warn: 'ioc->internal_lookup' double freed

Link: https://lore.kernel.org/r/20200508110738.30732-1-suganath-prabu.subramani@broadcom.com
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

power: supply: smb347-charger: IRQSTAT_D is volatile

[ Upstream commit c32ea07a30630ace950e07ffe7a18bdcc25898e1 ]

Fix failure when USB cable is connected:
smb347 2-006a: reading IRQSTAT_D failed

Fixes: 1502cfe19bac ("smb347-charger: Fix battery status reporting logic for charger faults")
Tested-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

PCI/ASPM: Allow ASPM on links to PCIe-to-PCI/PCI-X Bridges

[ Upstream commit 66ff14e59e8a30690755b08bc3042359703fb07a ]

7d715a6c1ae5 ("PCI: add PCI Express ASPM support") added the ability for
Linux to enable ASPM, but for some undocumented reason, it didn't enable
ASPM on links where the downstream component is a PCIe-to-PCI/PCI-X Bridge.

Remove this exclusion so we can enable ASPM on these links.

The Dell OptiPlex 7080 mentioned in the bugzilla has a TI XIO2001
PCIe-to-PCI Bridge.  Enabling ASPM on the link leading to it allows the
Intel SoC to enter deeper Package C-states, which is a significant power
savings.

[bhelgaas: commit log]
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=207571
Link: https://lore.kernel.org/r/20200505173423.26968-1-kai.heng.feng@canonical.com
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drivers: base: Fix NULL pointer exception in __platform_driver_probe() if a driver developer is foolish

[ Upstream commit 388bcc6ecc609fca1b4920de7dc3806c98ec535e ]

If platform bus driver registration is failed then, accessing
platform bus spin lock (&drv->driver.bus->p->klist_drivers.k_lock)
in __platform_driver_probe() without verifying the return value
__platform_driver_register() can lead to NULL pointer exception.

So check the return value before attempting the spin lock.

One such example is below:

For a custom usecase, I have intentionally failed the platform bus
registration and I expected all the platform device/driver
registrations to fail gracefully. But I came across this panic
issue.

[    1.331067] BUG: kernel NULL pointer dereference, address: 00000000000000c8
[    1.331118] #PF: supervisor write access in kernel mode
[    1.331163] #PF: error_code(0x0002) - not-present page
[    1.331208] PGD 0 P4D 0
[    1.331233] Oops: 0002 [#1] PREEMPT SMP
[    1.331268] CPU: 3 PID: 1 Comm: swapper/0 Tainted: G        W         5.6.0-00049-g670d35fb0144 #165
[    1.331341] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
[    1.331406] RIP: 0010:_raw_spin_lock+0x15/0x30
[    1.331588] RSP: 0000:ffffc9000001be70 EFLAGS: 00010246
[    1.331632] RAX: 0000000000000000 RBX: 00000000000000c8 RCX: 0000000000000001
[    1.331696] RDX: 0000000000000001 RSI: 0000000000000092 RDI: 0000000000000000
[    1.331754] RBP: 00000000ffffffed R08: 0000000000000501 R09: 0000000000000001
[    1.331817] R10: ffff88817abcc520 R11: 0000000000000670 R12: 00000000ffffffed
[    1.331881] R13: ffffffff82dbc268 R14: ffffffff832f070a R15: 0000000000000000
[    1.331945] FS:  0000000000000000(0000) GS:ffff88817bd80000(0000) knlGS:0000000000000000
[    1.332008] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[    1.332062] CR2: 00000000000000c8 CR3: 000000000681e001 CR4: 00000000003606e0
[    1.332126] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[    1.332189] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[    1.332252] Call Trace:
[    1.332281]  __platform_driver_probe+0x92/0xee
[    1.332323]  ? rtc_dev_init+0x2b/0x2b
[    1.332358]  cmos_init+0x37/0x67
[    1.332396]  do_one_initcall+0x7d/0x168
[    1.332428]  kernel_init_freeable+0x16c/0x1c9
[    1.332473]  ? rest_init+0xc0/0xc0
[    1.332508]  kernel_init+0x5/0x100
[    1.332543]  ret_from_fork+0x1f/0x30
[    1.332579] CR2: 00000000000000c8
[    1.332616] ---[ end trace 3bd87f12e9010b87 ]---
[    1.333549] note: swapper/0[1] exited with preempt_count 1
[    1.333592] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000009
[    1.333736] Kernel Offset: disabled

Note, this can only be triggered if a driver errors out from this call,
which should never happen.  If it does, the driver needs to be fixed.

Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Link: https://lore.kernel.org/r/20200408214003.3356-1-sathyanarayanan.kuppuswamy@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

serial: amba-pl011: Make sure we initialize the port.lock spinlock

[ Upstream commit 8508f4cba308f785b2fd4b8c38849c117b407297 ]

Valentine reported seeing:

[    3.626638] INFO: trying to register non-static key.
[    3.626639] the code is fine but needs lockdep annotation.
[    3.626640] turning off the locking correctness validator.
[    3.626644] CPU: 7 PID: 51 Comm: kworker/7:1 Not tainted 5.7.0-rc2-00115-g8c2e9790f196 #116
[    3.626646] Hardware name: HiKey960 (DT)
[    3.626656] Workqueue: events deferred_probe_work_func
[    3.632476] sd 0:0:0:0: [sda] Optimal transfer size 8192 bytes not a multiple of physical block size (16384 bytes)
[    3.640220] Call trace:
[    3.640225]  dump_backtrace+0x0/0x1b8
[    3.640227]  show_stack+0x20/0x30
[    3.640230]  dump_stack+0xec/0x158
[    3.640234]  register_lock_class+0x598/0x5c0
[    3.640235]  __lock_acquire+0x80/0x16c0
[    3.640236]  lock_acquire+0xf4/0x4a0
[    3.640241]  _raw_spin_lock_irqsave+0x70/0xa8
[    3.640245]  uart_add_one_port+0x388/0x4b8
[    3.640248]  pl011_register_port+0x70/0xf0
[    3.640250]  pl011_probe+0x184/0x1b8
[    3.640254]  amba_probe+0xdc/0x180
[    3.640256]  really_probe+0xe0/0x338
[    3.640257]  driver_probe_device+0x60/0xf8
[    3.640259]  __device_attach_driver+0x8c/0xd0
[    3.640260]  bus_for_each_drv+0x84/0xd8
[    3.640261]  __device_attach+0xe4/0x140
[    3.640263]  device_initial_probe+0x1c/0x28
[    3.640265]  bus_probe_device+0xa4/0xb0
[    3.640266]  deferred_probe_work_func+0x7c/0xb8
[    3.640269]  process_one_work+0x2c0/0x768
[    3.640271]  worker_thread+0x4c/0x498
[    3.640272]  kthread+0x14c/0x158
[    3.640275]  ret_from_fork+0x10/0x1c

Which seems to be due to the fact that after allocating the uap
structure, nothing initializes the spinlock.

Its a little confusing, as uart_port_spin_lock_init() is one
place where the lock is supposed to be initialized, but it has
an exception for the case where the port is a console.

This makes it seem like a deeper fix is needed to properly
register the console, but I'm not sure what that entails, and
Andy suggested that this approach is less invasive.

Thus, this patch resolves the issue by initializing the spinlock
in the driver, and resolves the resulting warning.

Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Jiri Slaby <jslaby@suse.com>
Cc: linux-serial@vger.kernel.org
Reported-by: Valentin Schneider <valentin.schneider@arm.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Reviewed-and-tested-by: Valentin Schneider <valentin.schneider@arm.com>
Link: https://lore.kernel.org/r/20200428184050.6501-1-john.stultz@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

i2c: pxa: fix i2c_pxa_scream_blue_murder() debug output

[ Upstream commit 88b73ee7ca4c90baf136ed5a8377fc5a9b73ac08 ]

The IRQ log output is supposed to appear on a single line.  However,
commit 3a2dc1677b60 ("i2c: pxa: Update debug function to dump more info
on error") resulted in it being printed one-entry-per-line, which is
excessively long.

Fixing this is not a trivial matter; using pr_cont() doesn't work as
the previous dev_dbg() may not have been compiled in, or may be
dynamic.

Since the rest of this function output is at error level, and is also
debug output, promote this to error level as well to avoid this
problem.

Reduce the number of always zero prefix digits to save screen real-
estate.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

staging: sm750fb: add missing case while setting FB_VISUAL

[ Upstream commit fa90133377f4a7f15a937df6ad55133bb57c5665 ]

Switch statement does not contain all cases: 8, 16, 24, 32.
This patch will add missing one (24)

Fixes: 81dee67e215b ("staging: sm750fb: add sm750 to staging")
Signed-off-by: Matej Dujava <mdujava@kocurkovo.cz>
Link: https://lore.kernel.org/r/1588277366-19354-2-git-send-email-mdujava@kocurkovo.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tty: hvc: Fix data abort due to race in hvc_open

[ Upstream commit e2bd1dcbe1aa34ff5570b3427c530e4332ecf0fe ]

Potentially, hvc_open() can be called in parallel when two tasks calls
open() on /dev/hvcX. In such a scenario, if the hp->ops->notifier_add()
callback in the function fails, where it sets the tty->driver_data to
NULL, the parallel hvc_open() can see this NULL and cause a memory abort.
Hence, serialize hvc_open and check if tty->private_data is NULL before
proceeding ahead.

The issue can be easily reproduced by launching two tasks simultaneously
that does nothing but open() and close() on /dev/hvcX.
For example:
$ ./simple_open_close /dev/hvc0 & ./simple_open_close /dev/hvc0 &

Signed-off-by: Raghavendra Rao Ananta <rananta@codeaurora.org>
Link: https://lore.kernel.org/r/20200428032601.22127-1-rananta@codeaurora.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

s390/qdio: put thinint indicator after early error

[ Upstream commit 75e82bec6b2622c6f455b7a543fb5476a5d0eed7 ]

qdio_establish() calls qdio_setup_thinint() via qdio_setup_irq().
If the subsequent qdio_establish_thinint() fails, we miss to put the
DSCI again. Thus the DSCI isn't available for re-use. Given enough of
such errors, we could end up with having only the shared DSCI available.

Merge qdio_setup_thinint() into qdio_establish_thinint(), and deal with
such an error internally.

Fixes: 779e6e1c724d ("[S390] qdio: new qdio driver.")
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: usb-audio: Improve frames size computation

[ Upstream commit f0bd62b64016508938df9babe47f65c2c727d25c ]

For computation of the the next frame size current value of fs/fps and
accumulated fractional parts of fs/fps are used, where values are stored
in Q16.16 format. This is quite natural for computing frame size for
asynchronous endpoints driven by explicit feedback, since in this case
fs/fps is a value provided by the feedback endpoint and it's already in
the Q format. If an error is accumulated over time, the device can
adjust fs/fps value to prevent buffer overruns/underruns.

But for synchronous endpoints the accuracy provided by these computations
is not enough. Due to accumulated error the driver periodically produces
frames with incorrect size (+/- 1 audio sample).

This patch fixes this issue by implementing a different algorithm for
frame size computation. It is based on accumulating of the remainders
from division fs/fps and it doesn't accumulate errors over time. This
new method is enabled for synchronous and adaptive playback endpoints.

Signed-off-by: Alexander Tsoy <alexander@tsoy.me>
Link: https://lore.kernel.org/r/20200424022449.14972-1-alexander@tsoy.me
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: ibmvscsi: Don't send host info in adapter info MAD after LPM

[ Upstream commit 4919b33b63c8b69d8dcf2b867431d0e3b6dc6d28 ]

The adapter info MAD is used to send the client info and receive the host
info as a response. A persistent buffer is used and as such the client info
is overwritten after the response. During the course of a normal adapter
reset the client info is refreshed in the buffer in preparation for sending
the adapter info MAD.

However, in the special case of LPM where we reenable the CRQ instead of a
full CRQ teardown and reset we fail to refresh the client info in the
adapter info buffer. As a result, after Live Partition Migration (LPM) we
erroneously report the host's info as our own.

[mkp: typos]

Link: https://lore.kernel.org/r/20200603203632.18426-1-tyreld@linux.ibm.com
Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: sr: Fix sr_probe() missing deallocate of device minor

[ Upstream commit 6555781b3fdec5e94e6914511496144241df7dee ]

If the cdrom fails to be registered then the device minor should be
deallocated.

Link: https://lore.kernel.org/r/072dac4b-8402-4de8-36bd-47e7588969cd@0882a8b5-c6c3-11e9-b005-00805fc181fe
Signed-off-by: Simon Arlott <simon@octiron.net>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mksysmap: Fix the mismatch of '.L' symbols in System.map

[ Upstream commit 72d24accf02add25e08733f0ecc93cf10fcbd88c ]

When System.map was generated, the kernel used mksysmap to
filter the kernel symbols, but all the symbols with the
second letter 'L' in the kernel were filtered out, not just
the symbols starting with 'dot + L'.

For example:
ashimida@ubuntu:~/linux$ cat System.map |grep ' .L'
ashimida@ubuntu:~/linux$ nm -n vmlinux |grep ' .L'
ffff0000088028e0 t bLength_show
......
ffff0000092e0408 b PLLP_OUTC_lock
ffff0000092e0410 b PLLP_OUTA_lock

The original intent should be to filter out all local symbols
starting with '.L', so the dot should be escaped.

Fixes: 00902e984732 ("mksysmap: Add h8300 local symbol pattern")
Signed-off-by: ashimida <ashimida@linux.alibaba.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

yam: fix possible memory leak in yam_init_driver

[ Upstream commit 98749b7188affbf2900c2aab704a8853901d1139 ]

If register_netdev(dev) fails, free_netdev(dev) needs
to be called, otherwise a memory leak will occur.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/crashkernel: Take "mem=" option into account

[ Upstream commit be5470e0c285a68dc3afdea965032f5ddc8269d7 ]

'mem=" option is an easy way to put high pressure on memory during
some test. Hence after applying the memory limit, instead of total
mem, the actual usable memory should be considered when reserving mem
for crashkernel. Otherwise the boot up may experience OOM issue.

E.g. it would reserve 4G prior to the change and 512M afterward, if
passing
crashkernel="2G-4G:384M,4G-16G:512M,16G-64G:1G,64G-128G:2G,128G-:4G",
and mem=5G on a 256G machine.

This issue is powerpc specific because it puts higher priority on
fadump and kdump reservation than on "mem=". Referring the following
code:
    if (fadump_reserve_mem() == 0)
            reserve_crashkernel();
    ...
    /* Ensure that total memory size is page-aligned. */
    limit = ALIGN(memory_limit ?: memblock_phys_mem_size(), PAGE_SIZE);
    memblock_enforce_memory_limit(limit);

While on other arches, the effect of "mem=" takes a higher priority
and pass through memblock_phys_mem_size() before calling
reserve_crashkernel().

Signed-off-by: Pingfan Liu <kernelfans@gmail.com>
Reviewed-by: Hari Bathini <hbathini@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1585749644-4148-1-git-send-email-kernelfans@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

nfsd: Fix svc_xprt refcnt leak when setup callback client failed

[ Upstream commit a4abc6b12eb1f7a533c2e7484cfa555454ff0977 ]

nfsd4_process_cb_update() invokes svc_xprt_get(), which increases the
refcount of the "c->cn_xprt".

The reference counting issue happens in one exception handling path of
nfsd4_process_cb_update(). When setup callback client failed, the
function forgets to decrease the refcnt increased by svc_xprt_get(),
causing a refcnt leak.

Fix this issue by calling svc_xprt_put() when setup callback client
failed.

Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn>
Signed-off-by: Xin Tan <tanxin.ctf@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: lpfc: Fix lpfc_nodelist leak when processing unsolicited event

[ Upstream commit 7217e6e694da3aae6d17db8a7f7460c8d4817ebf ]

In order to create or activate a new node, lpfc_els_unsol_buffer() invokes
lpfc_nlp_init() or lpfc_enable_node() or lpfc_nlp_get(), all of them will
return a reference of the specified lpfc_nodelist object to "ndlp" with
increased refcnt.

When lpfc_els_unsol_buffer() returns, local variable "ndlp" becomes
invalid, so the refcount should be decreased to keep refcount balanced.

The reference counting issue happens in one exception handling path of
lpfc_els_unsol_buffer(). When "ndlp" in DEV_LOSS, the function forgets to
decrease the refcnt increased by lpfc_nlp_init() or lpfc_enable_node() or
lpfc_nlp_get(), causing a refcnt leak.

Fix this issue by calling lpfc_nlp_put() when "ndlp" in DEV_LOSS.

Link: https://lore.kernel.org/r/1590416184-52592-1-git-send-email-xiyuyang19@fudan.edu.cn
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Reviewed-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn>
Signed-off-by: Xin Tan <tanxin.ctf@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mfd: wm8994: Fix driver operation if loaded as modules

[ Upstream commit d4f9b5428b53dd67f49ee8deed8d4366ed6b1933 ]

WM8994 chip has built-in regulators, which might be used for chip
operation. They are controlled by a separate wm8994-regulator driver,
which should be loaded before this driver calls regulator_get(), because
that driver also provides consumer-supply mapping for the them. If that
driver is not yet loaded, regulator core substitute them with dummy
regulator, what breaks chip operation, because the built-in regulators are
never enabled. Fix this by annotating this driver with MODULE_SOFTDEP()
"pre" dependency to "wm8994_regulator" module.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

vfio/pci: fix memory leaks in alloc_perm_bits()

[ Upstream commit 3e63b94b6274324ff2e7d8615df31586de827c4e ]

vfio_pci_disable() calls vfio_config_free() but forgets to call
free_perm_bits() resulting in memory leaks,

unreferenced object 0xc000000c4db2dee0 (size 16):
  comm "qemu-kvm", pid 4305, jiffies 4295020272 (age 3463.780s)
  hex dump (first 16 bytes):
    00 00 ff 00 ff ff ff ff ff ff ff ff ff ff 00 00  ................
  backtrace:
    [<00000000a6a4552d>] alloc_perm_bits+0x58/0xe0 [vfio_pci]
    [<00000000ac990549>] vfio_config_init+0xdf0/0x11b0 [vfio_pci]
    init_pci_cap_msi_perm at drivers/vfio/pci/vfio_pci_config.c:1125
    (inlined by) vfio_msi_cap_len at drivers/vfio/pci/vfio_pci_config.c:1180
    (inlined by) vfio_cap_len at drivers/vfio/pci/vfio_pci_config.c:1241
    (inlined by) vfio_cap_init at drivers/vfio/pci/vfio_pci_config.c:1468
    (inlined by) vfio_config_init at drivers/vfio/pci/vfio_pci_config.c:1707
    [<000000006db873a1>] vfio_pci_open+0x234/0x700 [vfio_pci]
    [<00000000630e1906>] vfio_group_fops_unl_ioctl+0x8e0/0xb84 [vfio]
    [<000000009e34c54f>] ksys_ioctl+0xd8/0x130
    [<000000006577923d>] sys_ioctl+0x28/0x40
    [<000000006d7b1cf2>] system_call_exception+0x114/0x1e0
    [<0000000008ea7dd5>] system_call_common+0xf0/0x278
unreferenced object 0xc000000c4db2e330 (size 16):
  comm "qemu-kvm", pid 4305, jiffies 4295020272 (age 3463.780s)
  hex dump (first 16 bytes):
    00 ff ff 00 ff ff ff ff ff ff ff ff ff ff 00 00  ................
  backtrace:
    [<000000004c71914f>] alloc_perm_bits+0x44/0xe0 [vfio_pci]
    [<00000000ac990549>] vfio_config_init+0xdf0/0x11b0 [vfio_pci]
    [<000000006db873a1>] vfio_pci_open+0x234/0x700 [vfio_pci]
    [<00000000630e1906>] vfio_group_fops_unl_ioctl+0x8e0/0xb84 [vfio]
    [<000000009e34c54f>] ksys_ioctl+0xd8/0x130
    [<000000006577923d>] sys_ioctl+0x28/0x40
    [<000000006d7b1cf2>] system_call_exception+0x114/0x1e0
    [<0000000008ea7dd5>] system_call_common+0xf0/0x278

Fixes: 89e1f7d4c66d ("vfio: Add PCI device driver")
Signed-off-by: Qian Cai <cai@lca.pw>
[aw: rolled in follow-up patch]
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ps3disk: use the default segment boundary

[ Upstream commit 720bc316690bd27dea9d71510b50f0cd698ffc32 ]

Since commit dcebd755926b ("block: use bio_for_each_bvec() to compute
multi-page bvec count"), the kernel will bug_on on the PS3 because
bio_split() is called with sectors == 0:

  kernel BUG at block/bio.c:1853!
  Oops: Exception in kernel mode, sig: 5 [#1]
  BE PAGE_SIZE=4K MMU=Hash PREEMPT SMP NR_CPUS=8 NUMA PS3
  Modules linked in: firewire_sbp2 rtc_ps3(+) soundcore ps3_gelic(+) \
  ps3rom(+) firewire_core ps3vram(+) usb_common crc_itu_t
  CPU: 0 PID: 97 Comm: blkid Not tainted 5.3.0-rc4 #1
  NIP:  c00000000027d0d0 LR: c00000000027d0b0 CTR: 0000000000000000
  REGS: c00000000135ae90 TRAP: 0700   Not tainted  (5.3.0-rc4)
  MSR:  8000000000028032 <SF,EE,IR,DR,RI>  CR: 44008240  XER: 20000000
  IRQMASK: 0
  GPR00: c000000000289368 c00000000135b120 c00000000084a500 c000000004ff8300
  GPR04: 0000000000000c00 c000000004c905e0 c000000004c905e0 000000000000ffff
  GPR08: 0000000000000000 0000000000000001 0000000000000000 000000000000ffff
  GPR12: 0000000000000000 c0000000008ef000 000000000000003e 0000000000080001
  GPR16: 0000000000000100 000000000000ffff 0000000000000000 0000000000000004
  GPR20: c00000000062fd7e 0000000000000001 000000000000ffff 0000000000000080
  GPR24: c000000000781788 c00000000135b350 0000000000000080 c000000004c905e0
  GPR28: c00000000135b348 c000000004ff8300 0000000000000000 c000000004c90000
  NIP [c00000000027d0d0] .bio_split+0x28/0xac
  LR [c00000000027d0b0] .bio_split+0x8/0xac
  Call Trace:
  [c00000000135b120] [c00000000027d130] .bio_split+0x88/0xac (unreliable)
  [c00000000135b1b0] [c000000000289368] .__blk_queue_split+0x11c/0x53c
  [c00000000135b2d0] [c00000000028f614] .blk_mq_make_request+0x80/0x7d4
  [c00000000135b3d0] [c000000000283a8c] .generic_make_request+0x118/0x294
  [c00000000135b4b0] [c000000000283d34] .submit_bio+0x12c/0x174
  [c00000000135b580] [c000000000205a44] .mpage_bio_submit+0x3c/0x4c
  [c00000000135b600] [c000000000206184] .mpage_readpages+0xa4/0x184
  [c00000000135b750] [c0000000001ff8fc] .blkdev_readpages+0x24/0x38
  [c00000000135b7c0] [c0000000001589f0] .read_pages+0x6c/0x1a8
  [c00000000135b8b0] [c000000000158c74] .__do_page_cache_readahead+0x118/0x184
  [c00000000135b9b0] [c0000000001591a8] .force_page_cache_readahead+0xe4/0xe8
  [c00000000135ba50] [c00000000014fc24] .generic_file_read_iter+0x1d8/0x830
  [c00000000135bb50] [c0000000001ffadc] .blkdev_read_iter+0x40/0x5c
  [c00000000135bbc0] [c0000000001b9e00] .new_sync_read+0x144/0x1a0
  [c00000000135bcd0] [c0000000001bc454] .vfs_read+0xa0/0x124
  [c00000000135bd70] [c0000000001bc7a4] .ksys_read+0x70/0xd8
  [c00000000135be20] [c00000000000a524] system_call+0x5c/0x70
  Instruction dump:
  7fe3fb78 482e30dc 7c0802a6 482e3085 7c9e2378 f821ff71 7ca42b78 7d3e00d0
  7c7d1b78 79290fe0 7cc53378 69290001 <0b090000> 81230028 7bca0020 7929ba62
  [ end trace 313fec760f30aa1f ]---

The problem originates from setting the segment boundary of the
request queue to -1UL. This makes get_max_segment_size() return zero
when offset is zero, whatever the max segment size. The test with
BLK_SEG_BOUNDARY_MASK fails and 'mask - (mask & offset) + 1' overflows
to zero in the return statement.

Not setting the segment boundary and using the default
value (BLK_SEG_BOUNDARY_MASK) fixes the problem.

Signed-off-by: Emmanuel Nicolet <emmanuel.nicolet@gmail.com>
Signed-off-by: Geoff Levand <geoff@infradead.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/060a416c43138f45105c0540eff1a45539f7e2fc.1589049250.git.geoff@infradead.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

usblp: poison URBs upon disconnect

[ Upstream commit 296a193b06120aa6ae7cf5c0d7b5e5b55968026e ]

syzkaller reported an URB that should have been killed to be active.
We do not understand it, but this should fix the issue if it is real.

Signed-off-by: Oliver Neukum <oneukum@suse.com>
Reported-by: syzbot+be5b5f86a162a6c281e6@syzkaller.appspotmail.com
Link: https://lore.kernel.org/r/20200507085806.5793-1-oneukum@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

i2c: pxa: clear all master action bits in i2c_pxa_stop_message()

[ Upstream commit e81c979f4e071d516aa27cf5a0c3939da00dc1ca ]

If we timeout during a message transfer, the control register may
contain bits that cause an action to be set. Read-modify-writing the
register leaving these bits set may trigger the hardware to attempt
one of these actions unintentionally.

Always clear these bits when cleaning up after a message or after
a timeout.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: qla2xxx: Fix issue with adapter's stopping state

[ Upstream commit 803e45550b11c8e43d89812356fe6f105adebdf9 ]

The goal of the following command sequence is to restart the adapter.
However, the tgt_stop flag remains set, indicating that the adapter is
still in stopping state even after re-enabling it.

echo 0x7fffffff > /sys/module/qla2xxx/parameters/logging
modprobe target_core_mod
modprobe tcm_qla2xxx
mkdir /sys/kernel/config/target/qla2xxx
mkdir /sys/kernel/config/target/qla2xxx/<port-name>
mkdir /sys/kernel/config/target/qla2xxx/<port-name>/tpgt_1
echo 1 > /sys/kernel/config/target/qla2xxx/<port-name>/tpgt_1/enable
echo 0 > /sys/kernel/config/target/qla2xxx/<port-name>/tpgt_1/enable
echo 1 > /sys/kernel/config/target/qla2xxx/<port-name>/tpgt_1/enable

kernel: PID 1396:qla_target.c:1555 qlt_stop_phase1(): tgt_stop 0x0, tgt_stopped 0x0
kernel: qla2xxx [0001:00:02.0]-e803:1: PID 1396:qla_target.c:1567: Stopping target for host 1(c0000000033557e8)
kernel: PID 1396:qla_target.c:1579 qlt_stop_phase1(): tgt_stop 0x1, tgt_stopped 0x0
kernel: PID 1396:qla_target.c:1266 qlt_schedule_sess_for_deletion(): tgt_stop 0x1, tgt_stopped 0x0
kernel: qla2xxx [0001:00:02.0]-e801:1: PID 1396:qla_target.c:1316: Scheduling sess c00000002d5cd800 for deletion 21:00:00:24:ff:7f:35:c7
<skipped>
kernel: qla2xxx [0001:00:02.0]-290a:1: PID 340:qla_target.c:1187: qlt_unreg_sess sess c00000002d5cd800 for deletion 21:00:00:24:ff:7f:35:c7
<skipped>
kernel: qla2xxx [0001:00:02.0]-f801:1: PID 340:qla_target.c:1145: Unregistration of sess c00000002d5cd800 21:00:00:24:ff:7f:35:c7 finished fcp_cnt 0
kernel: PID 340:qla_target.c:1155 qlt_free_session_done(): tgt_stop 0x1, tgt_stopped 0x0
kernel: qla2xxx [0001:00:02.0]-4807:1: PID 346:qla_os.c:6329: ISP abort scheduled.
<skipped>
kernel: qla2xxx [0001:00:02.0]-28f1:1: PID 346:qla_os.c:3956: Mark all dev lost
kernel: PID 346:qla_target.c:1266 qlt_schedule_sess_for_deletion(): tgt_stop 0x1, tgt_stopped 0x0
kernel: qla2xxx [0001:00:02.0]-4808:1: PID 346:qla_os.c:6338: ISP abort end.
<skipped>
kernel: PID 1396:qla_target.c:6812 qlt_enable_vha(): tgt_stop 0x1, tgt_stopped 0x0
<skipped>
kernel: qla2xxx [0001:00:02.0]-4807:1: PID 346:qla_os.c:6329: ISP abort scheduled.
<skipped>
kernel: qla2xxx [0001:00:02.0]-4808:1: PID 346:qla_os.c:6338: ISP abort end.

qlt_handle_cmd_for_atio() rejects the request to send commands because the
adapter is in the stopping state:

kernel: PID 0:qla_target.c:4442 qlt_handle_cmd_for_atio(): tgt_stop 0x1, tgt_stopped 0x0
kernel: qla2xxx [0001:00:02.0]-3861:1: PID 0:qla_target.c:4447: New command while device c000000005314600 is shutting down
kernel: qla2xxx [0001:00:02.0]-e85f:1: PID 0:qla_target.c:5728: qla_target: Unable to send command to target

This patch calls qla_stop_phase2() in addition to qlt_stop_phase1() in
tcm_qla2xxx_tpg_enable_store() and tcm_qla2xxx_npiv_tpg_enable_store(). The
qlt_stop_phase1() marks adapter as stopping (tgt_stop == 0x1, tgt_stopped
== 0x0) but qlt_stop_phase2() marks adapter as stopped (tgt_stop == 0x0,
tgt_stopped == 0x1).

Link: https://lore.kernel.org/r/52be1e8a3537f6c5407eae3edd4c8e08a9545ea5.camel@yadro.com
Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Viacheslav Dubeyko <v.dubeiko@yadro.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: isa/wavefront: prevent out of bounds write in ioctl

[ Upstream commit 7f0d5053c5a9d23fe5c2d337495a9d79038d267b ]

The "header->number" comes from the ioctl and it needs to be clamped to
prevent out of bounds writes.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20200501094011.GA960082@mwanda
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: qcom: msm8916: Fix the address location of pll->config_reg

[ Upstream commit f47ab3c2f5338828a67e89d5f688d2cef9605245 ]

During the process of debugging a processor derived from the msm8916 which
we found the new processor was not starting one of its PLLs.

After tracing the addresses and writes that downstream was doing and
comparing to upstream it became obvious that we were writing to a different
register location than downstream when trying to configure the PLL.

This error is also present in upstream msm8916.

As an example clk-pll.c::clk_pll_recalc_rate wants to write to
pll->config_reg updating the bit-field POST_DIV_RATIO. That bit-field is
defined in PLL_USER_CTL not in PLL_CONFIG_CTL. Taking the BIMC PLL as an
example

lm80-p0436-13_c_qc_snapdragon_410_processor_hrd.pdf

0x01823010 GCC_BIMC_PLL_USER_CTL
0x01823014 GCC_BIMC_PLL_CONFIG_CTL

This pattern is repeated for gpll0, gpll1, gpll2 and bimc_pll.

This error is likely not apparent since the bootloader will already have
initialized these PLLs.

This patch corrects the location of config_reg from PLL_CONFIG_CTL to
PLL_USER_CTL for all relevant PLLs on msm8916.

Fixes commit 3966fab8b6ab ("clk: qcom: Add MSM8916 Global Clock Controller support")

Cc: Georgi Djakov <georgi.djakov@linaro.org>
Cc: Andy Gross <agross@kernel.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://lkml.kernel.org/r/20200329124116.4185447-1-bryan.odonoghue@linaro.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

i2c: piix4: Detect secondary SMBus controller on AMD AM4 chipsets

[ Upstream commit f27237c174fd9653033330e4e532cd9d153ce824 ]

The AMD X370 and other AM4 chipsets (A/B/X 3/4/5 parts) and Threadripper
equivalents have a secondary SMBus controller at I/O port address
0x0B20.  This bus is used by several manufacturers to control
motherboard RGB lighting via embedded controllers.  I have been using
this bus in my OpenRGB project to control the Aura RGB on many
motherboards and ASRock also uses this bus for their Polychrome RGB
controller.

I am not aware of any CZ-compatible platforms which do not have the
second SMBus channel.  All of AMD's AM4- and Threadripper- series
chipsets that OpenRGB users have tested appear to have this secondary
bus.  I also noticed this secondary bus is present on older AMD
platforms including my FM1 home server.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=202587
Signed-off-by: Adam Honse <calcprogrammer1@gmail.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: sunxi: Fix incorrect usage of round_down()

[ Upstream commit ee25d9742dabed3fd18158b518f846abeb70f319 ]

round_down() can only round to powers of 2. If round_down() is asked
to round to something that is not a power of 2, incorrect results are
produced. The incorrect results can be both too large and too small.

Instead, use rounddown() which can round to any number.

Fixes: 6a721db180a2 ("clk: sunxi: Add A31 clocks support")
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Sasha Levin <sashal@kernel.org>

s390: fix syscall_get_error for compat processes

commit b3583fca5fb654af2cfc1c08259abb9728272538 upstream.

If both the tracer and the tracee are compat processes, and gprs[2]
is assigned a value by __poke_user_compat, then the higher 32 bits
of gprs[2] are cleared, IS_ERR_VALUE() always returns false, and
syscall_get_error() always returns 0.

Fix the implementation by sign-extending the value for compat processes
the same way as x86 implementation does.

The bug was exposed to user space by commit 201766a20e30f ("ptrace: add
PTRACE_GET_SYSCALL_INFO request") and detected by strace test suite.

This change fixes strace syscall tampering on s390.

Link: https://lkml.kernel.org/r/20200602180051.GA2427@altlinux.org
Fixes: 753c4dd6a2fa2 ("[S390] ptrace changes")
Cc: Elvira Khabirova <lineprinter@altlinux.org>
Cc: stable@vger.kernel.org # v2.6.28+
Signed-off-by: Dmitry V. Levin <ldv@altlinux.org>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 4.4.228

perf symbols: Fix debuginfo search for Ubuntu

commit 85afd35575a3c1a3a905722dde5ee70b49282e70 upstream.

Reportedly, from 19.10 Ubuntu has begun mixing up the location of some
debug symbol files, putting files expected to be in
/usr/lib/debug/usr/lib into /usr/lib/debug/lib instead. Fix by adding
another dso_binary_type.

Example on Ubuntu 20.04

  Before:

    $ perf record -e intel_pt//u uname
    Linux
    [ perf record: Woken up 1 times to write data ]
    [ perf record: Captured and wrote 0.030 MB perf.data ]
    $ perf script --call-trace | head -5
           uname 14003 [005] 15321.764958566:  cbr: 42 freq: 4219 MHz (156%)
           uname 14003 [005] 15321.764958566: (/usr/lib/x86_64-linux-gnu/ld-2.31.so              )          7f1e71cc4100
           uname 14003 [005] 15321.764961566: (/usr/lib/x86_64-linux-gnu/ld-2.31.so              )              7f1e71cc4df0
           uname 14003 [005] 15321.764961900: (/usr/lib/x86_64-linux-gnu/ld-2.31.so              )              7f1e71cc4e18
           uname 14003 [005] 15321.764963233: (/usr/lib/x86_64-linux-gnu/ld-2.31.so              )              7f1e71cc5128

  After:

    $ perf script --call-trace | head -5
           uname 14003 [005] 15321.764958566:  cbr: 42 freq: 4219 MHz (156%)
           uname 14003 [005] 15321.764958566: (/usr/lib/x86_64-linux-gnu/ld-2.31.so              )      _start
           uname 14003 [005] 15321.764961566: (/usr/lib/x86_64-linux-gnu/ld-2.31.so              )          _dl_start
           uname 14003 [005] 15321.764961900: (/usr/lib/x86_64-linux-gnu/ld-2.31.so              )          _dl_start
           uname 14003 [005] 15321.764963233: (/usr/lib/x86_64-linux-gnu/ld-2.31.so              )          _dl_start

Reported-by: Travis Downs <travis.downs@gmail.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: stable@vger.kernel.org
Link: http://lore.kernel.org/lkml/20200526155207.9172-1-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf probe: Do not show the skipped events

commit f41ebe9defacddeae96a872a33f0f22ced0bfcef upstream.

When a probe point is expanded to several places (like inlined) and if
some of them are skipped because of blacklisted or __init function,
those trace_events has no event name. It must be skipped while showing
results.

Without this fix, you can see "(null):(null)" on the list,

  # ./perf probe request_resource
  reserve_setup is out of .text, skip it.
  Added new events:
    (null):(null)        (on request_resource)
    probe:request_resource (on request_resource)

  You can now use it in all perf tools, such as:

   perf record -e probe:request_resource -aR sleep 1

  #

With this fix, it is ignored:

  # ./perf probe request_resource
  reserve_setup is out of .text, skip it.
  Added new events:
    probe:request_resource (on request_resource)

  You can now use it in all perf tools, such as:

   perf record -e probe:request_resource -aR sleep 1

  #

Fixes: 5a51fcd1f30c ("perf probe: Skip kernel symbols which is out of .text")
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: stable@vger.kernel.org
Link: http://lore.kernel.org/lkml/158763968263.30755.12800484151476026340.stgit@devnote2
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

w1: omap-hdq: cleanup to add missing newline for some dev_dbg

commit 5e02f3b31704e24537697bce54f8156bdb72b7a6 upstream.

Otherwise it will corrupt the console log during debugging.

Fixes: 7b5362a603a1 ("w1: omap_hdq: Fix some error/debug handling.")
Cc: stable@vger.kernel.org
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Link: https://lore.kernel.org/r/cd0d55749a091214106575f6e1d363c6db56622f.1590255176.git.hns@goldelico.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sunrpc: clean up properly in gss_mech_unregister()

commit 24c5efe41c29ee3e55bcf5a1c9f61ca8709622e8 upstream.

gss_mech_register() calls svcauth_gss_register_pseudoflavor() for each
flavour, but gss_mech_unregister() does not call auth_domain_put().
This is unbalanced and makes it impossible to reload the module.

Change svcauth_gss_register_pseudoflavor() to return the registered
auth_domain, and save it for later release.

Cc: stable@vger.kernel.org (v2.6.12+)
Link: https://bugzilla.kernel.org/show_bug.cgi?id=206651
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sunrpc: svcauth_gss_register_pseudoflavor must reject duplicate registrations.

commit d47a5dc2888fd1b94adf1553068b8dad76cec96c upstream.

There is no valid case for supporting duplicate pseudoflavor
registrations.
Currently the silent acceptance of such registrations is hiding a bug.
The rpcsec_gss_krb5 module registers 2 flavours but does not unregister
them, so if you load, unload, reload the module, it will happily
continue to use the old registration which now has pointers to the
memory were the module was originally loaded.  This could lead to
unexpected results.

So disallow duplicate registrations.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=206651
Cc: stable@vger.kernel.org (v2.6.12+)
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kbuild: force to build vmlinux if CONFIG_MODVERSION=y

commit 4b50c8c4eaf06a825d1c005c0b1b4a8307087b83 upstream.

This code does not work as stated in the comment.

$(CONFIG_MODVERSIONS) is always empty because it is expanded before
include/config/auto.conf is included. Hence, 'make modules' with
CONFIG_MODVERSION=y cannot record the version CRCs.

This has been broken since 2003, commit ("kbuild: Enable modules to be
build using the "make dir/" syntax"). [1]

[1]: https://git.kernel.org/pub/scm/linux/kernel/git/history/history.git/commit/?id=15c6240cdc44bbeef3c4797ec860f9765ef4f1a7
Cc: linux-stable <stable@vger.kernel.org> # v2.5.71+
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/macintosh: Fix memleak in windfarm_pm112 driver

commit 93900337b9ac2f4eca427eff6d187be2dc3b5551 upstream.

create_cpu_loop() calls smu_sat_get_sdb_partition() which does
kmalloc() and returns the allocated buffer. In fact it's called twice,
and neither buffer is freed.

This results in a memory leak as reported by Erhard:
  unreferenced object 0xc00000047081f840 (size 32):
    comm "kwindfarm", pid 203, jiffies 4294880630 (age 5552.877s)
    hex dump (first 32 bytes):
      c8 06 02 7f ff 02 ff 01 fb bf 00 41 00 20 00 00  ...........A. ..
      00 07 89 37 00 a0 00 00 00 00 00 00 00 00 00 00  ...7............
    backtrace:
      [<0000000083f0a65c>] .smu_sat_get_sdb_partition+0xc4/0x2d0 [windfarm_smu_sat]
      [<000000003010fcb7>] .pm112_wf_notify+0x104c/0x13bc [windfarm_pm112]
      [<00000000b958b2dd>] .notifier_call_chain+0xa8/0x180
      [<0000000070490868>] .blocking_notifier_call_chain+0x64/0x90
      [<00000000131d8149>] .wf_thread_func+0x114/0x1a0
      [<000000000d54838d>] .kthread+0x13c/0x190
      [<00000000669b72bc>] .ret_from_kernel_thread+0x58/0x64
  unreferenced object 0xc0000004737089f0 (size 16):
    comm "kwindfarm", pid 203, jiffies 4294880879 (age 5552.050s)
    hex dump (first 16 bytes):
      c4 04 01 7f 22 11 e0 e6 ff 55 7b 12 ec 11 00 00  ...."....U{.....
    backtrace:
      [<0000000083f0a65c>] .smu_sat_get_sdb_partition+0xc4/0x2d0 [windfarm_smu_sat]
      [<00000000b94ef7e1>] .pm112_wf_notify+0x1294/0x13bc [windfarm_pm112]
      [<00000000b958b2dd>] .notifier_call_chain+0xa8/0x180
      [<0000000070490868>] .blocking_notifier_call_chain+0x64/0x90
      [<00000000131d8149>] .wf_thread_func+0x114/0x1a0
      [<000000000d54838d>] .kthread+0x13c/0x190
      [<00000000669b72bc>] .ret_from_kernel_thread+0x58/0x64

Fix it by rearranging the logic so we deal with each buffer
separately, which then makes it easy to free the buffer once we're
done with it.

Fixes: ac171c46667c ("[PATCH] powerpc: Thermal control for dual core G5s")
Cc: stable@vger.kernel.org # v2.6.16+
Reported-by: Erhard F. <erhard_f@mailbox.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Tested-by: Erhard F. <erhard_f@mailbox.org>
Link: https://lore.kernel.org/r/20200423060038.3308530-1-mpe@ellerman.id.au
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: tegra: Correct PL310 Auxiliary Control Register initialization

commit 35509737c8f958944e059d501255a0bf18361ba0 upstream.

The PL310 Auxiliary Control Register shouldn't have the "Full line of
zero" optimization bit being set before L2 cache is enabled. The L2X0
driver takes care of enabling the optimization by itself.

This patch fixes a noisy error message on Tegra20 and Tegra30 telling
that cache optimization is erroneously enabled without enabling it for
the CPU:

L2C-310: enabling full line of zeros but not enabled in Cortex-A9

Cc: <stable@vger.kernel.org>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Tested-by: Nicolas Chauvet <kwizart@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kernel/cpu_pm: Fix uninitted local in cpu_pm

commit b5945214b76a1f22929481724ffd448000ede914 upstream.

cpu_pm_notify() is basically a wrapper of notifier_call_chain().
notifier_call_chain() doesn't initialize *nr_calls to 0 before it
starts incrementing it--presumably it's up to the callers to do this.

Unfortunately the callers of cpu_pm_notify() don't init *nr_calls.
This potentially means you could get too many or two few calls to
CPU_PM_ENTER_FAILED or CPU_CLUSTER_PM_ENTER_FAILED depending on the
luck of the stack.

Let's fix this.

Fixes: ab10023e0088 ("cpu_pm: Add cpu power management notifiers")
Cc: stable@vger.kernel.org
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20200504104917.v6.3.I2d44fc0053d019f239527a4e5829416714b7e299@changeid
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sparc32: fix register window handling in genregs32_[gs]et()

commit cf51e129b96847f969bfb8af1ee1516a01a70b39 upstream.

It needs access_process_vm() if the traced process does not share
mm with the caller.  Solution is similar to what sparc64 does.
Note that genregs32_set() is only ever called with pos being 0
or 32 * sizeof(u32) (the latter - as part of PTRACE_SETREGS
handling).

Cc: stable@kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

pinctrl: samsung: Save/restore eint_mask over suspend for EINT_TYPE GPIOs

commit f354157a7d184db430c1a564c506434e33b1bec5 upstream.

Currently, for EINT_TYPE GPIOs, the CON and FLTCON registers
are saved and restored over a suspend/resume cycle.  However, the
EINT_MASK registers are not.

On S5PV210 at the very least, these registers are not retained over
suspend, leading to the interrupts remaining masked upon resume and
therefore no interrupts being triggered for the device.  There should
be no effect on any SoCs that do retain these registers as theoretically
we would just be re-writing what was already there.

Fixes: 7ccbc60cd9c2 ("pinctrl: exynos: Handle suspend/resume of GPIO EINT registers")
Cc: <stable@vger.kernel.org>
Signed-off-by: Jonathan Bakker <xc-racer2@live.ca>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

power: vexpress: add suppress_bind_attrs to true

commit 73174acc9c75960af2daa7dcbdb9781fc0d135cb upstream.

Make sure that the POWER_RESET_VEXPRESS driver won't have bind/unbind
attributes available via the sysfs, so lets be explicit here and use
".suppress_bind_attrs = true" to prevent userspace from doing something
silly.

Link: https://lore.kernel.org/r/20200527112608.3886105-2-anders.roxell@linaro.org
Cc: stable@vger.kernel.org
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

igb: Report speed and duplex as unknown when device is runtime suspended

commit 165ae7a8feb53dc47fb041357e4b253bfc927cf9 upstream.

igb device gets runtime suspended when there's no link partner. We can't
get correct speed under that state:
$ cat /sys/class/net/enp3s0/speed
1000

In addition to that, an error can also be spotted in dmesg:
[  385.991957] igb 0000:03:00.0 enp3s0: PCIe link lost

Since device can only be runtime suspended when there's no link partner,
we can skip reading register and let the following logic set speed and
duplex with correct status.

The more generic approach will be wrap get_link_ksettings() with begin()
and complete() callbacks. However, for this particular issue, begin()
calls igb_runtime_resume() , which tries to rtnl_lock() while the lock
is already hold by upper ethtool layer.

So let's take this approach until the igb_runtime_resume() no longer
needs to hold rtnl_lock.

CC: stable <stable@vger.kernel.org>
Suggested-by: Alexander Duyck <alexander.duyck@gmail.com>
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

b43_legacy: Fix connection problem with WPA3

commit 6a29d134c04a8acebb7a95251acea7ad7abba106 upstream.

Since the driver was first introduced into the kernel, it has only
handled the ciphers associated with WEP, WPA, and WPA2. It fails with
WPA3 even though mac80211 can handle those additional ciphers in software,
b43legacy did not report that it could handle them. By setting MFP_CAPABLE using
ieee80211_set_hw(), the problem is fixed.

With this change, b43legacy will handle the ciphers it knows in hardware,
and let mac80211 handle the others in software. It is not necessary to
use the module parameter NOHWCRYPT to turn hardware encryption off.
Although this change essentially eliminates that module parameter,
I am choosing to keep it for cases where the hardware is broken,
and software encryption is required for all ciphers.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Stable <stable@vger.kernel.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200526155909.5807-3-Larry.Finger@lwfinger.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

b43: Fix connection problem with WPA3

commit 75d057bda1fbca6ade21378aa45db712e5f7d962 upstream.

Since the driver was first introduced into the kernel, it has only
handled the ciphers associated with WEP, WPA, and WPA2. It fails with
WPA3 even though mac80211 can handle those additional ciphers in software,
b43 did not report that it could handle them. By setting MFP_CAPABLE using
ieee80211_set_hw(), the problem is fixed.

With this change, b43 will handle the ciphers it knows in hardware,
and let mac80211 handle the others in software. It is not necessary to
use the module parameter NOHWCRYPT to turn hardware encryption off.
Although this change essentially eliminates that module parameter,
I am choosing to keep it for cases where the hardware is broken,
and software encryption is required for all ciphers.

Reported-and-tested-by: Rui Salvaterra <rsalvaterra@gmail.com>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Stable <stable@vger.kernel.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200526155909.5807-2-Larry.Finger@lwfinger.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

b43legacy: Fix case where channel status is corrupted

commit ec4d3e3a054578de34cd0b587ab8a1ac36f629d9 upstream.

This patch fixes commit 75388acd0cd8 ("add mac80211-based driver for
legacy BCM43xx devices")

In https://bugzilla.kernel.org/show_bug.cgi?id=207093, a defect in
b43legacy is reported. Upon testing, thus problem exists on PPC and
X86 platforms, is present in the oldest kernel tested (3.2), and
has been present in the driver since it was first added to the kernel.

The problem is a corrupted channel status received from the device.
Both the internal card in a PowerBook G4 and the PCMCIA version
(Broadcom BCM4306 with PCI ID 14e4:4320) have the problem. Only Rev, 2
(revision 4 of the 802.11 core) of the chip has been tested. No other
devices using b43legacy are available for testing.

Various sources of the problem were considered. Buffer overrun and
other sources of corruption within the driver were rejected because
the faulty channel status is always the same, not a random value.
It was concluded that the faulty data is coming from the device, probably
due to a firmware bug. As that source is not available, the driver
must take appropriate action to recover.

At present, the driver reports the error, and them continues to process
the bad packet. This is believed that to be a mistake, and the correct
action is to drop the correpted packet.

Fixes: 75388acd0cd8 ("add mac80211-based driver for legacy BCM43xx devices")
Cc: Stable <stable@vger.kernel.org>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Reported-and-tested by: F. Erhard <erhard_f@mailbox.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200407190043.1686-1-Larry.Finger@lwfinger.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: go7007: fix a miss of snd_card_free

commit 9453264ef58638ce8976121ac44c07a3ef375983 upstream.

go7007_snd_init() misses a snd_card_free() in an error path.
Add the missed call to fix it.

Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
[Salvatore Bonaccorso: Adjust context for backport to versions which do
not contain c0decac19da3 ("media: use strscpy() instead of strlcpy()")
and ba78170ef153 ("media: go7007: Fix misuse of strscpy")]
Signed-off-by: Salvatore Bonaccorso <carnil@debian.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

carl9170: remove P2P_GO support

commit b14fba7ebd04082f7767a11daea7f12f3593de22 upstream.

This patch follows up on a bug-report by Frank Schäfer that
discovered P2P GO wasn't working with wpa_supplicant.
This patch removes part of the broken P2P GO support but
keeps the vif switchover code in place.

Cc: <stable@vger.kernel.org>
Link: <https://lkml.kernel.org/r/3a9d86b6-744f-e670-8792-9167257edef8@googlemail.com>
Reported-by: Frank Schäfer <fschaefer.oss@googlemail.com>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200425092811.9494-1-chunkeey@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

e1000e: Relax condition to trigger reset for ME workaround

commit d601afcae2febc49665008e9a79e701248d56c50 upstream.

It's an error if the value of the RX/TX tail descriptor does not match
what was written. The error condition is true regardless the duration
of the interference from ME. But the driver only performs the reset if
E1000_ICH_FWSM_PCIM2PCI_COUNT (2000) iterations of 50us delay have
transpired. The extra condition can lead to inconsistency between the
state of hardware as expected by the driver.

Fix this by dropping the check for number of delay iterations.

While at it, also make __ew32_prepare() static as it's not used
anywhere else.

CC: stable <stable@vger.kernel.org>
Signed-off-by: Punit Agrawal <punit1.agrawal@toshiba.co.jp>
Reviewed-by: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI: Program MPS for RCiEP devices

commit aa0ce96d72dd2e1b0dfd0fb868f82876e7790878 upstream.

Root Complex Integrated Endpoints (RCiEPs) do not have an upstream bridge,
so pci_configure_mps() previously ignored them, which may result in reduced
performance.

Instead, program the Max_Payload_Size of RCiEPs to the maximum supported
value (unless it is limited for the PCIE_BUS_PEER2PEER case).  This also
affects the subsequent programming of Max_Read_Request_Size because Linux
programs MRRS based on the MPS value.

Fixes: 9dae3a97297f ("PCI: Move MPS configuration check to pci_configure_device()")
Link: https://lore.kernel.org/r/1585343775-4019-1-git-send-email-ashok.raj@intel.com
Tested-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ima: Directly assign the ima_default_policy pointer to ima_rules

[ Upstream commit 067a436b1b0aafa593344fddd711a755a58afb3b ]

This patch prevents the following oops:

[   10.771813] BUG: kernel NULL pointer dereference, address: 0000000000000
[...]
[   10.779790] RIP: 0010:ima_match_policy+0xf7/0xb80
[...]
[   10.798576] Call Trace:
[   10.798993]  ? ima_lsm_policy_change+0x2b0/0x2b0
[   10.799753]  ? inode_init_owner+0x1a0/0x1a0
[   10.800484]  ? _raw_spin_lock+0x7a/0xd0
[   10.801592]  ima_must_appraise.part.0+0xb6/0xf0
[   10.802313]  ? ima_fix_xattr.isra.0+0xd0/0xd0
[   10.803167]  ima_must_appraise+0x4f/0x70
[   10.804004]  ima_post_path_mknod+0x2e/0x80
[   10.804800]  do_mknodat+0x396/0x3c0

It occurs when there is a failure during IMA initialization, and
ima_init_policy() is not called. IMA hooks still call ima_match_policy()
but ima_rules is NULL. This patch prevents the crash by directly assigning
the ima_default_policy pointer to ima_rules when ima_rules is defined. This
wouldn't alter the existing behavior, as ima_rules is always set at the end
of ima_init_policy().

Cc: stable@vger.kernel.org # 3.7.x
Fixes: 07f6a79415d7d ("ima: add appraise action keywords and default rules")
Reported-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

btrfs: fix error handling when submitting direct I/O bio

[ Upstream commit 6d3113a193e3385c72240096fe397618ecab6e43 ]

In btrfs_submit_direct_hook(), if a direct I/O write doesn't span a RAID
stripe or chunk, we submit orig_bio without cloning it. In this case, we
don't increment pending_bios. Then, if btrfs_submit_dio_bio() fails, we
decrement pending_bios to -1, and we never complete orig_bio. Fix it by
initializing pending_bios to 1 instead of incrementing later.

Fixing this exposes another bug: we put orig_bio prematurely and then
put it again from end_io. Fix it by not putting orig_bio.

After this change, pending_bios is really more of a reference count, but
I'll leave that cleanup separate to keep the fix small.

Fixes: e65e15355429 ("btrfs: fix panic caused by direct IO")
CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

btrfs: send: emit file capabilities after chown

[ Upstream commit 89efda52e6b6930f80f5adda9c3c9edfb1397191 ]

Whenever a chown is executed, all capabilities of the file being touched
are lost.  When doing incremental send with a file with capabilities,
there is a situation where the capability can be lost on the receiving
side. The sequence of actions bellow shows the problem:

  $ mount /dev/sda fs1
  $ mount /dev/sdb fs2

  $ touch fs1/foo.bar
  $ setcap cap_sys_nice+ep fs1/foo.bar
  $ btrfs subvolume snapshot -r fs1 fs1/snap_init
  $ btrfs send fs1/snap_init | btrfs receive fs2

  $ chgrp adm fs1/foo.bar
  $ setcap cap_sys_nice+ep fs1/foo.bar

  $ btrfs subvolume snapshot -r fs1 fs1/snap_complete
  $ btrfs subvolume snapshot -r fs1 fs1/snap_incremental

  $ btrfs send fs1/snap_complete | btrfs receive fs2
  $ btrfs send -p fs1/snap_init fs1/snap_incremental | btrfs receive fs2

At this point, only a chown was emitted by "btrfs send" since only the
group was changed. This makes the cap_sys_nice capability to be dropped
from fs2/snap_incremental/foo.bar

To fix that, only emit capabilities after chown is emitted. The current
code first checks for xattrs that are new/changed, emits them, and later
emit the chown. Now, __process_new_xattr skips capabilities, letting
only finish_inode_if_needed to emit them, if they exist, for the inode
being processed.

This behavior was being worked around in "btrfs receive" side by caching
the capability and only applying it after chown. Now, xattrs are only
emmited _after_ chown, making that workaround not needed anymore.

Link: https://github.com/kdave/btrfs-progs/issues/202
CC: stable@vger.kernel.org # 4.4+
Suggested-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Marcos Paulo de Souza <mpdesouza@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Btrfs: fix unreplayable log after snapshot delete + parent dir fsync

[ Upstream commit 1ec9a1ae1e30c733077c0b288c4301b66b7a81f2 ]

If we delete a snapshot, fsync its parent directory and crash/power fail
before the next transaction commit, on the next mount when we attempt to
replay the log tree of the root containing the parent directory we will
fail and prevent the filesystem from mounting, which is solvable by wiping
out the log trees with the btrfs-zero-log tool but very inconvenient as
we will lose any data and metadata fsynced before the parent directory
was fsynced.

For example:

  $ mkfs.btrfs -f /dev/sdc
  $ mount /dev/sdc /mnt
  $ mkdir /mnt/testdir
  $ btrfs subvolume snapshot /mnt /mnt/testdir/snap
  $ btrfs subvolume delete /mnt/testdir/snap
  $ xfs_io -c "fsync" /mnt/testdir
  < crash / power failure and reboot >
  $ mount /dev/sdc /mnt
  mount: mount(2) failed: No such file or directory

And in dmesg/syslog we get the following message and trace:

[192066.361162] BTRFS info (device dm-0): failed to delete reference to snap, inode 257 parent 257
[192066.363010] ------------[ cut here ]------------
[192066.365268] WARNING: CPU: 4 PID: 5130 at fs/btrfs/inode.c:3986 __btrfs_unlink_inode+0x17a/0x354 [btrfs]()
[192066.367250] BTRFS: Transaction aborted (error -2)
[192066.368401] Modules linked in: btrfs dm_flakey dm_mod ppdev sha256_generic xor raid6_pq hmac drbg ansi_cprng aesni_intel acpi_cpufreq tpm_tis aes_x86_64 tpm ablk_helper evdev cryptd sg parport_pc i2c_piix4 psmouse lrw parport i2c_core pcspkr gf128mul processor serio_raw glue_helper button loop autofs4 ext4 crc16 mbcache jbd2 sd_mod sr_mod cdrom ata_generic virtio_scsi ata_piix libata virtio_pci virtio_ring crc32c_intel scsi_mod e1000 virtio floppy [last unloaded: btrfs]
[192066.377154] CPU: 4 PID: 5130 Comm: mount Tainted: G        W       4.4.0-rc6-btrfs-next-20+ #1
[192066.378875] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS by qemu-project.org 04/01/2014
[192066.380889]  0000000000000000 ffff880143923670 ffffffff81257570 ffff8801439236b8
[192066.382561]  ffff8801439236a8 ffffffff8104ec07 ffffffffa039dc2c 00000000fffffffe
[192066.384191]  ffff8801ed31d000 ffff8801b9fc9c88 ffff8801086875e0 ffff880143923710
[192066.385827] Call Trace:
[192066.386373]  [<ffffffff81257570>] dump_stack+0x4e/0x79
[192066.387387]  [<ffffffff8104ec07>] warn_slowpath_common+0x99/0xb2
[192066.388429]  [<ffffffffa039dc2c>] ? __btrfs_unlink_inode+0x17a/0x354 [btrfs]
[192066.389236]  [<ffffffff8104ec68>] warn_slowpath_fmt+0x48/0x50
[192066.389884]  [<ffffffffa039dc2c>] __btrfs_unlink_inode+0x17a/0x354 [btrfs]
[192066.390621]  [<ffffffff81184b55>] ? iput+0xb0/0x266
[192066.391200]  [<ffffffffa039ea25>] btrfs_unlink_inode+0x1c/0x3d [btrfs]
[192066.391930]  [<ffffffffa03ca623>] check_item_in_log+0x1fe/0x29b [btrfs]
[192066.392715]  [<ffffffffa03ca827>] replay_dir_deletes+0x167/0x1cf [btrfs]
[192066.393510]  [<ffffffffa03cccc7>] replay_one_buffer+0x417/0x570 [btrfs]
[192066.394241]  [<ffffffffa03ca164>] walk_up_log_tree+0x10e/0x1dc [btrfs]
[192066.394958]  [<ffffffffa03cac72>] walk_log_tree+0xa5/0x190 [btrfs]
[192066.395628]  [<ffffffffa03ce8b8>] btrfs_recover_log_trees+0x239/0x32c [btrfs]
[192066.396790]  [<ffffffffa03cc8b0>] ? replay_one_extent+0x50a/0x50a [btrfs]
[192066.397891]  [<ffffffffa0394041>] open_ctree+0x1d8b/0x2167 [btrfs]
[192066.398897]  [<ffffffffa03706e1>] btrfs_mount+0x5ef/0x729 [btrfs]
[192066.399823]  [<ffffffff8108ad98>] ? trace_hardirqs_on+0xd/0xf
[192066.400739]  [<ffffffff8108959b>] ? lockdep_init_map+0xb9/0x1b3
[192066.401700]  [<ffffffff811714b9>] mount_fs+0x67/0x131
[192066.402482]  [<ffffffff81188560>] vfs_kern_mount+0x6c/0xde
[192066.403930]  [<ffffffffa03702bd>] btrfs_mount+0x1cb/0x729 [btrfs]
[192066.404831]  [<ffffffff8108ad98>] ? trace_hardirqs_on+0xd/0xf
[192066.405726]  [<ffffffff8108959b>] ? lockdep_init_map+0xb9/0x1b3
[192066.406621]  [<ffffffff811714b9>] mount_fs+0x67/0x131
[192066.407401]  [<ffffffff81188560>] vfs_kern_mount+0x6c/0xde
[192066.408247]  [<ffffffff8118ae36>] do_mount+0x893/0x9d2
[192066.409047]  [<ffffffff8113009b>] ? strndup_user+0x3f/0x8c
[192066.409842]  [<ffffffff8118b187>] SyS_mount+0x75/0xa1
[192066.410621]  [<ffffffff8147e517>] entry_SYSCALL_64_fastpath+0x12/0x6b
[192066.411572] ---[ end trace 2de42126c1e0a0f0 ]---
[192066.412344] BTRFS: error (device dm-0) in __btrfs_unlink_inode:3986: errno=-2 No such entry
[192066.413748] BTRFS: error (device dm-0) in btrfs_replay_log:2464: errno=-2 No such entry (Failed to recover log tree)
[192066.415458] BTRFS error (device dm-0): cleaner transaction attach returned -30
[192066.444613] BTRFS: open_ctree failed

This happens because when we are replaying the log and processing the
directory entry pointing to the snapshot in the subvolume tree, we treat
its btrfs_dir_item item as having a location with a key type matching
BTRFS_INODE_ITEM_KEY, which is wrong because the type matches
BTRFS_ROOT_ITEM_KEY and therefore must be processed differently, as the
object id refers to a root number and not to an inode in the root
containing the parent directory.

So fix this by triggering a transaction commit if an fsync against the
parent directory is requested after deleting a snapshot. This is the
simplest approach for a rare use case. Some alternative that avoids the
transaction commit would require more code to explicitly delete the
snapshot at log replay time (factoring out common code from ioctl.c:
btrfs_ioctl_snap_destroy()), special care at fsync time to remove the
log tree of the snapshot's root from the log root of the root of tree
roots, amongst other steps.

A test case for xfstests that triggers the issue follows.

  seq=`basename $0`
  seqres=$RESULT_DIR/$seq
  echo "QA output created by $seq"
  tmp=/tmp/$$
  status=1 # failure is the default!
  trap "_cleanup; exit \$status" 0 1 2 3 15

  _cleanup()
  {
      _cleanup_flakey
      cd /
      rm -f $tmp.*
  }

  # get standard environment, filters and checks
  . ./common/rc
  . ./common/filter
  . ./common/dmflakey

  # real QA test starts here
  _need_to_be_root
  _supported_fs btrfs
  _supported_os Linux
  _require_scratch
  _require_dm_target flakey
  _require_metadata_journaling $SCRATCH_DEV

  rm -f $seqres.full

  _scratch_mkfs >>$seqres.full 2>&1
  _init_flakey
  _mount_flakey

  # Create a snapshot at the root of our filesystem (mount point path), delete it,
  # fsync the mount point path, crash and mount to replay the log. This should
  # succeed and after the filesystem is mounted the snapshot should not be visible
  # anymore.
  _run_btrfs_util_prog subvolume snapshot $SCRATCH_MNT $SCRATCH_MNT/snap1
  _run_btrfs_util_prog subvolume delete $SCRATCH_MNT/snap1
  $XFS_IO_PROG -c "fsync" $SCRATCH_MNT
  _flakey_drop_and_remount
  [ -e $SCRATCH_MNT/snap1 ] && \
      echo "Snapshot snap1 still exists after log replay"

  # Similar scenario as above, but this time the snapshot is created inside a
  # directory and not directly under the root (mount point path).
  mkdir $SCRATCH_MNT/testdir
  _run_btrfs_util_prog subvolume snapshot $SCRATCH_MNT $SCRATCH_MNT/testdir/snap2
  _run_btrfs_util_prog subvolume delete $SCRATCH_MNT/testdir/snap2
  $XFS_IO_PROG -c "fsync" $SCRATCH_MNT/testdir
  _flakey_drop_and_remount
  [ -e $SCRATCH_MNT/testdir/snap2 ] && \
      echo "Snapshot snap2 still exists after log replay"

  _unmount_flakey

  echo "Silence is golden"
  status=0
  exit

Signed-off-by: Filipe Manana <fdmanana@suse.com>
Tested-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Chris Mason <clm@fb.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ext4: fix EXT_MAX_EXTENT/INDEX to check for zeroed eh_max

commit c36a71b4e35ab35340facdd6964a00956b9fef0a upstream.

If eh->eh_max is 0, EXT_MAX_EXTENT/INDEX would evaluate to unsigned
(-1) resulting in illegal memory accesses. Although there is no
consistent repro, we see that generic/019 sometimes crashes because of
this bug.

Ran gce-xfstests smoke and verified that there were no regressions.

Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20200421023959.20879-2-harshadshirwadkar@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ima: Fix ima digest hash table key calculation

commit 1129d31b55d509f15e72dc68e4b5c3a4d7b4da8d upstream.

Function hash_long() accepts unsigned long, while currently only one byte
is passed from ima_hash_key(), which calculates a key for ima_htable.

Given that hashing the digest does not give clear benefits compared to
using the digest itself, remove hash_long() and return the modulus
calculated on the first two bytes of the digest with the number of slots.
Also reduce the depth of the hash table by doubling the number of slots.

Cc: stable@vger.kernel.org
Fixes: 3323eec921ef ("integrity: IMA as an integrity service provider")
Co-developed-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Krzysztof Struczynski <krzysztof.struczynski@huawei.com>
Acked-by: David.Laight@aculab.com (big endian system concerns)
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cpuidle: Fix three reference count leaks

[ Upstream commit c343bf1ba5efcbf2266a1fe3baefec9cc82f867f ]

kobject_init_and_add() takes reference even when it fails.
If this function returns an error, kobject_put() must be called to
properly clean up the memory associated with the object.

Previous commit "b8eb718348b8" fixed a similar problem.

Signed-off-by: Qiushi Wu <wu000273@umn.edu>
[ rjw: Subject ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

spi: dw: Return any value retrieved from the dma_transfer callback

[ Upstream commit f0410bbf7d0fb80149e3b17d11d31f5b5197873e ]

DW APB SSI DMA-part of the driver may need to perform the requested
SPI-transfer synchronously. In that case the dma_transfer() callback
will return 0 as a marker of the SPI transfer being finished so the
SPI core doesn't need to wait and may proceed with the SPI message
trasnfers pumping procedure. This will be needed to fix the problem
when DMA transactions are finished, but there is still data left in
the SPI Tx/Rx FIFOs being sent/received. But for now make dma_transfer
to return 1 as the normal dw_spi_transfer_one() method.

Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Cc: Georgy Vlasov <Georgy.Vlasov@baikalelectronics.ru>
Cc: Ramil Zaripov <Ramil.Zaripov@baikalelectronics.ru>
Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Feng Tang <feng.tang@intel.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: linux-mips@vger.kernel.org
Cc: devicetree@vger.kernel.org
Link: https://lore.kernel.org/r/20200529131205.31838-3-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ixgbe: fix signed-integer-overflow warning

[ Upstream commit 3b70683fc4d68f5d915d9dc7e5ba72c732c7315c ]

ubsan report this warning, fix it by adding a unsigned suffix.

UBSAN: signed-integer-overflow in
drivers/net/ethernet/intel/ixgbe/ixgbe_common.c:2246:26
65535 * 65537 cannot be represented in type 'int'
CPU: 21 PID: 7 Comm: kworker/u256:0 Not tainted 5.7.0-rc3-debug+ #39
Hardware name: Huawei TaiShan 2280 V2/BC82AMDC, BIOS 2280-V2 03/27/2020
Workqueue: ixgbe ixgbe_service_task [ixgbe]
Call trace:
 dump_backtrace+0x0/0x3f0
 show_stack+0x28/0x38
 dump_stack+0x154/0x1e4
 ubsan_epilogue+0x18/0x60
 handle_overflow+0xf8/0x148
 __ubsan_handle_mul_overflow+0x34/0x48
 ixgbe_fc_enable_generic+0x4d0/0x590 [ixgbe]
 ixgbe_service_task+0xc20/0x1f78 [ixgbe]
 process_one_work+0x8f0/0xf18
 worker_thread+0x430/0x6d0
 kthread+0x218/0x238
 ret_from_fork+0x10/0x18

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Xie XiuQi <xiexiuqi@huawei.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

MIPS: Fix IRQ tracing when call handle_fpe() and handle_msa_fpe()

[ Upstream commit 31e1b3efa802f97a17628dde280006c4cee4ce5e ]

Register "a1" is unsaved in this function,
 when CONFIG_TRACE_IRQFLAGS is enabled,
 the TRACE_IRQS_OFF macro will call trace_hardirqs_off(),
 and this may change register "a1".
 The changed register "a1" as argument will be send
 to do_fpe() and do_msa_fpe().

Signed-off-by: YuanJunQing <yuanjunqing66@163.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

PCI: Don't disable decoding when mmio_always_on is set

[ Upstream commit b6caa1d8c80cb71b6162cb1f1ec13aa655026c9f ]

Don't disable MEM/IO decoding when a device have both non_compliant_bars
and mmio_always_on.

That would allow us quirk devices with junk in BARs but can't disable
their decoding.

Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Acked-by: Bjorn Helgaas <helgaas@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

macvlan: Skip loopback packets in RX handler

[ Upstream commit 81f3dc9349ce0bf7b8447f147f45e70f0a5b36a6 ]

Ignore loopback-originatig packets soon enough and don't try to process L2
header where it doesn't exist. The very similar br_handle_frame() in bridge
code performs exactly the same check.

This is an example of such ICMPv6 packet:

skb len=96 headroom=40 headlen=96 tailroom=56
mac=(40,0) net=(40,40) trans=80
shinfo(txflags=0 nr_frags=0 gso(size=0 type=0 segs=0))
csum(0xae2e9a2f ip_summed=1 complete_sw=0 valid=0 level=0)
hash(0xc97ebd88 sw=1 l4=1) proto=0x86dd pkttype=5 iif=24
dev name=etha01.212 feat=0x0x0000000040005000
skb headroom: 00000000: 00 7c 86 52 84 88 ff ff 00 00 00 00 00 00 08 00
skb headroom: 00000010: 45 00 00 9e 5d 5c 40 00 40 11 33 33 00 00 00 01
skb headroom: 00000020: 02 40 43 80 00 00 86 dd
skb linear:   00000000: 60 09 88 bd 00 38 3a ff fe 80 00 00 00 00 00 00
skb linear:   00000010: 00 40 43 ff fe 80 00 00 ff 02 00 00 00 00 00 00
skb linear:   00000020: 00 00 00 00 00 00 00 01 86 00 61 00 40 00 00 2d
skb linear:   00000030: 00 00 00 00 00 00 00 00 03 04 40 e0 00 00 01 2c
skb linear:   00000040: 00 00 00 78 00 00 00 00 fd 5f 42 68 23 87 a8 81
skb linear:   00000050: 00 00 00 00 00 00 00 00 01 01 02 40 43 80 00 00
skb tailroom: 00000000: ...
skb tailroom: 00000010: ...
skb tailroom: 00000020: ...
skb tailroom: 00000030: ...

Call Trace, how it happens exactly:
 ...
 macvlan_handle_frame+0x321/0x425 [macvlan]
 ? macvlan_forward_source+0x110/0x110 [macvlan]
 __netif_receive_skb_core+0x545/0xda0
 ? enqueue_task_fair+0xe5/0x8e0
 ? __netif_receive_skb_one_core+0x36/0x70
 __netif_receive_skb_one_core+0x36/0x70
 process_backlog+0x97/0x140
 net_rx_action+0x1eb/0x350
 ? __hrtimer_run_queues+0x136/0x2e0
 __do_softirq+0xe3/0x383
 do_softirq_own_stack+0x2a/0x40
 </IRQ>
 do_softirq.part.4+0x4e/0x50
 netif_rx_ni+0x60/0xd0
 dev_loopback_xmit+0x83/0xf0
 ip6_finish_output2+0x575/0x590 [ipv6]
 ? ip6_cork_release.isra.1+0x64/0x90 [ipv6]
 ? __ip6_make_skb+0x38d/0x680 [ipv6]
 ? ip6_output+0x6c/0x140 [ipv6]
 ip6_output+0x6c/0x140 [ipv6]
 ip6_send_skb+0x1e/0x60 [ipv6]
 rawv6_sendmsg+0xc4b/0xe10 [ipv6]
 ? proc_put_long+0xd0/0xd0
 ? rw_copy_check_uvector+0x4e/0x110
 ? sock_sendmsg+0x36/0x40
 sock_sendmsg+0x36/0x40
 ___sys_sendmsg+0x2b6/0x2d0
 ? proc_dointvec+0x23/0x30
 ? addrconf_sysctl_forward+0x8d/0x250 [ipv6]
 ? dev_forward_change+0x130/0x130 [ipv6]
 ? _raw_spin_unlock+0x12/0x30
 ? proc_sys_call_handler.isra.14+0x9f/0x110
 ? __call_rcu+0x213/0x510
 ? get_max_files+0x10/0x10
 ? trace_hardirqs_on+0x2c/0xe0
 ? __sys_sendmsg+0x63/0xa0
 __sys_sendmsg+0x63/0xa0
 do_syscall_64+0x6c/0x1e0
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

m68k: mac: Don't call via_flush_cache() on Mac IIfx

[ Upstream commit bcc44f6b74106b31f0b0408b70305a40360d63b7 ]

There is no VIA2 chip on the Mac IIfx, so don't call via_flush_cache().
This avoids a boot crash which appeared in v5.4.

printk: console [ttyS0] enabled
printk: bootconsole [debug0] disabled
printk: bootconsole [debug0] disabled
Calibrating delay loop... 9.61 BogoMIPS (lpj=48064)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
devtmpfs: initialized
random: get_random_u32 called from bucket_table_alloc.isra.27+0x68/0x194 with crng_init=0
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
futex hash table entries: 256 (order: -1, 3072 bytes, linear)
NET: Registered protocol family 16
Data read fault at 0x00000000 in Super Data (pc=0x8a6a)
BAD KERNEL BUSERR
Oops: 00000000
Modules linked in:
PC: [<00008a6a>] via_flush_cache+0x12/0x2c
SR: 2700  SP: 01c1fe3c  a2: 01c24000
d0: 00001119    d1: 0000000c    d2: 00012000    d3: 0000000f
d4: 01c06840    d5: 00033b92    a0: 00000000    a1: 00000000
Process swapper (pid: 1, task=01c24000)
Frame format=B ssw=0755 isc=0200 isb=fff7 daddr=00000000 dobuf=01c1fed0
baddr=00008a6e dibuf=0000004e ver=f
Stack from 01c1fec4:
        01c1fed0 00007d7e 00010080 01c1fedc 0000792e 00000001 01c1fef4 00006b40
        01c80000 00040000 00000006 00000003 01c1ff1c 004a545e 004ff200 00040000
        00000000 00000003 01c06840 00033b92 004a5410 004b6c88 01c1ff84 000021e2
        00000073 00000003 01c06840 00033b92 0038507a 004bb094 004b6ca8 004b6c88
        004b6ca4 004b6c88 000021ae 00020002 00000000 01c0685d 00000000 01c1ffb4
        0049f938 00409c85 01c06840 0045bd40 00000073 00000002 00000002 00000000
Call Trace: [<00007d7e>] mac_cache_card_flush+0x12/0x1c
 [<00010080>] fix_dnrm+0x2/0x18
 [<0000792e>] cache_push+0x46/0x5a
 [<00006b40>] arch_dma_prep_coherent+0x60/0x6e
 [<00040000>] switched_to_dl+0x76/0xd0
 [<004a545e>] dma_atomic_pool_init+0x4e/0x188
 [<00040000>] switched_to_dl+0x76/0xd0
 [<00033b92>] parse_args+0x0/0x370
 [<004a5410>] dma_atomic_pool_init+0x0/0x188
 [<000021e2>] do_one_initcall+0x34/0x1be
 [<00033b92>] parse_args+0x0/0x370
 [<0038507a>] strcpy+0x0/0x1e
 [<000021ae>] do_one_initcall+0x0/0x1be
 [<00020002>] do_proc_dointvec_conv+0x54/0x74
 [<0049f938>] kernel_init_freeable+0x126/0x190
 [<0049f94c>] kernel_init_freeable+0x13a/0x190
 [<004a5410>] dma_atomic_pool_init+0x0/0x188
 [<00041798>] complete+0x0/0x3c
 [<000b9b0c>] kfree+0x0/0x20a
 [<0038df98>] schedule+0x0/0xd0
 [<0038d604>] kernel_init+0x0/0xda
 [<0038d610>] kernel_init+0xc/0xda
 [<0038d604>] kernel_init+0x0/0xda
 [<00002d38>] ret_from_kernel_thread+0xc/0x14
Code: 0000 2079 0048 10da 2279 0048 10c8 d3c8 <1011> 0200 fff7 1280 d1f9 0048 10c8 1010 0000 0008 1080 4e5e 4e75 4e56 0000 2039
Disabling lock debugging due to kernel taint
Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b

Thanks to Stan Johnson for capturing the console log and running git
bisect.

Git bisect said commit 8e3a68fb55e0 ("dma-mapping: make
dma_atomic_pool_init self-contained") is the first "bad" commit. I don't
know why. Perhaps mach_l2_flush first became reachable with that commit.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-and-tested-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Cc: Joshua Thompson <funaho@jurai.org>
Link: https://lore.kernel.org/r/b8bbeef197d6b3898e82ed0d231ad08f575a4b34.1589949122.git.fthain@telegraphics.com.au
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

x86/mm: Stop printing BRK addresses

[ Upstream commit 67d631b7c05eff955ccff4139327f0f92a5117e5 ]

This currently leaks kernel physical addresses into userspace.

Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Kees Cook <keescook@chromium.org>
Acked-by: Dave Hansen <dave.hansen@intel.com>
Link: https://lkml.kernel.org/r/20200229231120.1147527-1-nivedita@alum.mit.edu
Signed-off-by: Sasha Levin <sashal@kernel.org>

mips: Add udelay lpj numbers adjustment

[ Upstream commit ed26aacfb5f71eecb20a51c4467da440cb719d66 ]

Loops-per-jiffies is a special number which represents a number of
noop-loop cycles per CPU-scheduler quantum - jiffies. As you
understand aside from CPU-specific implementation it depends on
the CPU frequency. So when a platform has the CPU frequency fixed,
we have no problem and the current udelay interface will work
just fine. But as soon as CPU-freq driver is enabled and the cores
frequency changes, we'll end up with distorted udelay's. In order
to fix this we have to accordinly adjust the per-CPU udelay_val
(the same as the global loops_per_jiffy) number. This can be done
in the CPU-freq transition event handler. We subscribe to that event
in the MIPS arch time-inititalization method.

Co-developed-by: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
Signed-off-by: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Paul Burton <paulburton@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: devicetree@vger.kernel.org
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mwifiex: Fix memory corruption in dump_station

[ Upstream commit 3aa42bae9c4d1641aeb36f1a8585cd1d506cf471 ]

The mwifiex_cfg80211_dump_station() uses static variable for iterating
over a linked list of all associated stations (when the driver is in UAP
role). This has a race condition if .dump_station is called in parallel
for multiple interfaces. This corruption can be triggered by registering
multiple SSIDs and calling, in parallel for multiple interfaces
    iw dev <iface> station dump

[16750.719775] Unable to handle kernel paging request at virtual address dead000000000110
...
[16750.899173] Call trace:
[16750.901696]  mwifiex_cfg80211_dump_station+0x94/0x100 [mwifiex]
[16750.907824]  nl80211_dump_station+0xbc/0x278 [cfg80211]
[16750.913160]  netlink_dump+0xe8/0x320
[16750.916827]  netlink_recvmsg+0x1b4/0x338
[16750.920861]  ____sys_recvmsg+0x7c/0x2b0
[16750.924801]  ___sys_recvmsg+0x70/0x98
[16750.928564]  __sys_recvmsg+0x58/0xa0
[16750.932238]  __arm64_sys_recvmsg+0x28/0x30
[16750.936453]  el0_svc_common.constprop.3+0x90/0x158
[16750.941378]  do_el0_svc+0x74/0x90
[16750.944784]  el0_sync_handler+0x12c/0x1a8
[16750.948903]  el0_sync+0x114/0x140
[16750.952312] Code: f9400003 f907f423 eb02007f 54fffd60 (b9401060)
[16750.958583] ---[ end trace c8ad181c2f4b8576 ]---

This patch drops the use of the static iterator, and instead every time
the function is called iterates to the idx-th position of the
linked-list.

It would be better to convert the code not to use linked list for
associated stations storage (since the chip has a limited number of
associated stations anyway - it could just be an array). Such a change
may be proposed in the future. In the meantime this patch can backported
into stable kernels in this simple form.

Fixes: 8baca1a34d4c ("mwifiex: dump station support in uap mode")
Signed-off-by: Pali Rohár <pali@kernel.org>
Acked-by: Ganapathi Bhat <ganapathi.bhat@nxp.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200515075924.13841-1-pali@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

md: don't flush workqueue unconditionally in md_open

[ Upstream commit f6766ff6afff70e2aaf39e1511e16d471de7c3ae ]

We need to check mddev->del_work before flush workqueu since the purpose
of flush is to ensure the previous md is disappeared. Otherwise the similar
deadlock appeared if LOCKDEP is enabled, it is due to md_open holds the
bdev->bd_mutex before flush workqueue.

kernel: [  154.522645] ======================================================
kernel: [  154.522647] WARNING: possible circular locking dependency detected
kernel: [  154.522650] 5.6.0-rc7-lp151.27-default #25 Tainted: G           O
kernel: [  154.522651] ------------------------------------------------------
kernel: [  154.522653] mdadm/2482 is trying to acquire lock:
kernel: [  154.522655] ffff888078529128 ((wq_completion)md_misc){+.+.}, at: flush_workqueue+0x84/0x4b0
kernel: [  154.522673]
kernel: [  154.522673] but task is already holding lock:
kernel: [  154.522675] ffff88804efa9338 (&bdev->bd_mutex){+.+.}, at: __blkdev_get+0x79/0x590
kernel: [  154.522691]
kernel: [  154.522691] which lock already depends on the new lock.
kernel: [  154.522691]
kernel: [  154.522694]
kernel: [  154.522694] the existing dependency chain (in reverse order) is:
kernel: [  154.522696]
kernel: [  154.522696] -> #4 (&bdev->bd_mutex){+.+.}:
kernel: [  154.522704]        __mutex_lock+0x87/0x950
kernel: [  154.522706]        __blkdev_get+0x79/0x590
kernel: [  154.522708]        blkdev_get+0x65/0x140
kernel: [  154.522709]        blkdev_get_by_dev+0x2f/0x40
kernel: [  154.522716]        lock_rdev+0x3d/0x90 [md_mod]
kernel: [  154.522719]        md_import_device+0xd6/0x1b0 [md_mod]
kernel: [  154.522723]        new_dev_store+0x15e/0x210 [md_mod]
kernel: [  154.522728]        md_attr_store+0x7a/0xc0 [md_mod]
kernel: [  154.522732]        kernfs_fop_write+0x117/0x1b0
kernel: [  154.522735]        vfs_write+0xad/0x1a0
kernel: [  154.522737]        ksys_write+0xa4/0xe0
kernel: [  154.522745]        do_syscall_64+0x64/0x2b0
kernel: [  154.522748]        entry_SYSCALL_64_after_hwframe+0x49/0xbe
kernel: [  154.522749]
kernel: [  154.522749] -> #3 (&mddev->reconfig_mutex){+.+.}:
kernel: [  154.522752]        __mutex_lock+0x87/0x950
kernel: [  154.522756]        new_dev_store+0xc9/0x210 [md_mod]
kernel: [  154.522759]        md_attr_store+0x7a/0xc0 [md_mod]
kernel: [  154.522761]        kernfs_fop_write+0x117/0x1b0
kernel: [  154.522763]        vfs_write+0xad/0x1a0
kernel: [  154.522765]        ksys_write+0xa4/0xe0
kernel: [  154.522767]        do_syscall_64+0x64/0x2b0
kernel: [  154.522769]        entry_SYSCALL_64_after_hwframe+0x49/0xbe
kernel: [  154.522770]
kernel: [  154.522770] -> #2 (kn->count#253){++++}:
kernel: [  154.522775]        __kernfs_remove+0x253/0x2c0
kernel: [  154.522778]        kernfs_remove+0x1f/0x30
kernel: [  154.522780]        kobject_del+0x28/0x60
kernel: [  154.522783]        mddev_delayed_delete+0x24/0x30 [md_mod]
kernel: [  154.522786]        process_one_work+0x2a7/0x5f0
kernel: [  154.522788]        worker_thread+0x2d/0x3d0
kernel: [  154.522793]        kthread+0x117/0x130
kernel: [  154.522795]        ret_from_fork+0x3a/0x50
kernel: [  154.522796]
kernel: [  154.522796] -> #1 ((work_completion)(&mddev->del_work)){+.+.}:
kernel: [  154.522800]        process_one_work+0x27e/0x5f0
kernel: [  154.522802]        worker_thread+0x2d/0x3d0
kernel: [  154.522804]        kthread+0x117/0x130
kernel: [  154.522806]        ret_from_fork+0x3a/0x50
kernel: [  154.522807]
kernel: [  154.522807] -> #0 ((wq_completion)md_misc){+.+.}:
kernel: [  154.522813]        __lock_acquire+0x1392/0x1690
kernel: [  154.522816]        lock_acquire+0xb4/0x1a0
kernel: [  154.522818]        flush_workqueue+0xab/0x4b0
kernel: [  154.522821]        md_open+0xb6/0xc0 [md_mod]
kernel: [  154.522823]        __blkdev_get+0xea/0x590
kernel: [  154.522825]        blkdev_get+0x65/0x140
kernel: [  154.522828]        do_dentry_open+0x1d1/0x380
kernel: [  154.522831]        path_openat+0x567/0xcc0
kernel: [  154.522834]        do_filp_open+0x9b/0x110
kernel: [  154.522836]        do_sys_openat2+0x201/0x2a0
kernel: [  154.522838]        do_sys_open+0x57/0x80
kernel: [  154.522840]        do_syscall_64+0x64/0x2b0
kernel: [  154.522842]        entry_SYSCALL_64_after_hwframe+0x49/0xbe
kernel: [  154.522844]
kernel: [  154.522844] other info that might help us debug this:
kernel: [  154.522844]
kernel: [  154.522846] Chain exists of:
kernel: [  154.522846]   (wq_completion)md_misc --> &mddev->reconfig_mutex --> &bdev->bd_mutex
kernel: [  154.522846]
kernel: [  154.522850]  Possible unsafe locking scenario:
kernel: [  154.522850]
kernel: [  154.522852]        CPU0                    CPU1
kernel: [  154.522853]        ----                    ----
kernel: [  154.522854]   lock(&bdev->bd_mutex);
kernel: [  154.522856]                                lock(&mddev->reconfig_mutex);
kernel: [  154.522858]                                lock(&bdev->bd_mutex);
kernel: [  154.522860]   lock((wq_completion)md_misc);
kernel: [  154.522861]
kernel: [  154.522861]  *** DEADLOCK ***
kernel: [  154.522861]
kernel: [  154.522864] 1 lock held by mdadm/2482:
kernel: [  154.522865]  #0: ffff88804efa9338 (&bdev->bd_mutex){+.+.}, at: __blkdev_get+0x79/0x590
kernel: [  154.522868]
kernel: [  154.522868] stack backtrace:
kernel: [  154.522873] CPU: 1 PID: 2482 Comm: mdadm Tainted: G           O      5.6.0-rc7-lp151.27-default #25
kernel: [  154.522875] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
kernel: [  154.522878] Call Trace:
kernel: [  154.522881]  dump_stack+0x8f/0xcb
kernel: [  154.522884]  check_noncircular+0x194/0x1b0
kernel: [  154.522888]  ? __lock_acquire+0x1392/0x1690
kernel: [  154.522890]  __lock_acquire+0x1392/0x1690
kernel: [  154.522893]  lock_acquire+0xb4/0x1a0
kernel: [  154.522895]  ? flush_workqueue+0x84/0x4b0
kernel: [  154.522898]  flush_workqueue+0xab/0x4b0
kernel: [  154.522900]  ? flush_workqueue+0x84/0x4b0
kernel: [  154.522905]  ? md_open+0xb6/0xc0 [md_mod]
kernel: [  154.522908]  md_open+0xb6/0xc0 [md_mod]
kernel: [  154.522910]  __blkdev_get+0xea/0x590
kernel: [  154.522912]  ? bd_acquire+0xc0/0xc0
kernel: [  154.522914]  blkdev_get+0x65/0x140
kernel: [  154.522916]  ? bd_acquire+0xc0/0xc0
kernel: [  154.522918]  do_dentry_open+0x1d1/0x380
kernel: [  154.522921]  path_openat+0x567/0xcc0
kernel: [  154.522923]  ? __lock_acquire+0x380/0x1690
kernel: [  154.522926]  do_filp_open+0x9b/0x110
kernel: [  154.522929]  ? __alloc_fd+0xe5/0x1f0
kernel: [  154.522935]  ? kmem_cache_alloc+0x28c/0x630
kernel: [  154.522939]  ? do_sys_openat2+0x201/0x2a0
kernel: [  154.522941]  do_sys_openat2+0x201/0x2a0
kernel: [  154.522944]  do_sys_open+0x57/0x80
kernel: [  154.522946]  do_syscall_64+0x64/0x2b0
kernel: [  154.522948]  entry_SYSCALL_64_after_hwframe+0x49/0xbe
kernel: [  154.522951] RIP: 0033:0x7f98d279d9ae

And md_alloc also flushed the same workqueue, but the thing is different
here. Because all the paths call md_alloc don't hold bdev->bd_mutex, and
the flush is necessary to avoid race condition, so leave it as it is.

Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

kgdb: Fix spurious true from in_dbg_master()

[ Upstream commit 3fec4aecb311995189217e64d725cfe84a568de3 ]

Currently there is a small window where a badly timed migration could
cause in_dbg_master() to spuriously return true. Specifically if we
migrate to a new core after reading the processor id and the previous
core takes a breakpoint then we will evaluate true if we read
kgdb_active before we get the IPI to bring us to halt.

Fix this by checking irqs_disabled() first. Interrupts are always
disabled when we are executing the kgdb trap so this is an acceptable
prerequisite. This also allows us to replace raw_smp_processor_id()
with smp_processor_id() since the short circuit logic will prevent
warnings from PREEMPT_DEBUG.

Fixes: dcc7871128e9 ("kgdb: core changes to support kdb")
Suggested-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20200506164223.2875760-1-daniel.thompson@linaro.org
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mips: cm: Fix an invalid error code of INTVN_*_ERR

[ Upstream commit 8a0efb8b101665a843205eab3d67ab09cb2d9a8d ]

Commit 3885c2b463f6 ("MIPS: CM: Add support for reporting CM cache
errors") adds cm2_causes[] array with map of error type ID and
pointers to the short description string. There is a mistake in
the table, since according to MIPS32 manual CM2_ERROR_TYPE = {17,18}
correspond to INTVN_WR_ERR and INTVN_RD_ERR, while the table
claims they have {0x17,0x18} codes. This is obviously hex-dec
copy-paste bug. Moreover codes {0x18 - 0x1a} indicate L2 ECC errors.

Fixes: 3885c2b463f6 ("MIPS: CM: Add support for reporting CM cache errors")
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Paul Burton <paulburton@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: linux-pm@vger.kernel.org
Cc: devicetree@vger.kernel.org
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/spufs: fix copy_to_user while atomic

[ Upstream commit 88413a6bfbbe2f648df399b62f85c934460b7a4d ]

Currently, we may perform a copy_to_user (through
simple_read_from_buffer()) while holding a context's register_lock,
while accessing the context save area.

This change uses a temporary buffer for the context save area data,
which we then pass to simple_read_from_buffer.

Includes changes from Christoph Hellwig <hch@lst.de>.

Fixes: bf1ab978be23 ("[POWERPC] coredump: Add SPU elf notes to coredump.")
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
[hch: renamed to function to avoid ___-prefixes]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: allwinner: Fix use correct return type for ndo_start_xmit()

[ Upstream commit 09f6c44aaae0f1bdb8b983d7762676d5018c53bc ]

The method ndo_start_xmit() returns a value of type netdev_tx_t. Fix
the ndo function to use the correct type. And emac_start_xmit() can
leak one skb if 'channel' == 3.

Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: lpc-enet: fix error return code in lpc_mii_init()

[ Upstream commit 88ec7cb22ddde725ed4ce15991f0bd9dd817fd85 ]

Fix to return a negative error code from the error handling
case instead of 0, as done elsewhere in this function.

Fixes: b7370112f519 ("lpc32xx: Added ethernet driver")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Acked-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

lib/mpi: Fix 64-bit MIPS build with Clang

[ Upstream commit 18f1ca46858eac22437819937ae44aa9a8f9f2fa ]

When building 64r6_defconfig with CONFIG_MIPS32_O32 disabled and
CONFIG_CRYPTO_RSA enabled:

lib/mpi/generic_mpih-mul1.c:37:24: error: invalid use of a cast in a
inline asm context requiring an l-value: remove the cast
or build with -fheinous-gnu-extensions
                umul_ppmm(prod_high, prod_low, s1_ptr[j], s2_limb);
                ~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
lib/mpi/longlong.h:664:22: note: expanded from macro 'umul_ppmm'
                 : "=d" ((UDItype)(w0))
                         ~~~~~~~~~~^~~
lib/mpi/generic_mpih-mul1.c:37:13: error: invalid use of a cast in a
inline asm context requiring an l-value: remove the cast
or build with -fheinous-gnu-extensions
                umul_ppmm(prod_high, prod_low, s1_ptr[j], s2_limb);
                ~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
lib/mpi/longlong.h:668:22: note: expanded from macro 'umul_ppmm'
                 : "=d" ((UDItype)(w1))
                         ~~~~~~~~~~^~~
2 errors generated.

This special case for umul_ppmm for MIPS64r6 was added in
commit bbc25bee37d2b ("lib/mpi: Fix umul_ppmm() for MIPS64r6"), due to
GCC being inefficient and emitting a __multi3 intrinsic.

There is no such issue with clang; with this patch applied, I can build
this configuration without any problems and there are no link errors
like mentioned in the commit above (which I can still reproduce with
GCC 9.3.0 when that commit is reverted). Only use this definition when
GCC is being used.

This really should have been caught by commit b0c091ae04f67 ("lib/mpi:
Eliminate unused umul_ppmm definitions for MIPS") when I was messing
around in this area but I was not testing 64-bit MIPS at the time.

Link: https://github.com/ClangBuiltLinux/linux/issues/885
Reported-by: Dmitry Golovin <dima@golovin.in>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfilter: nft_nat: return EOPNOTSUPP if type or flags are not supported

[ Upstream commit 0d7c83463fdf7841350f37960a7abadd3e650b41 ]

Instead of EINVAL which should be used for malformed netlink messages.

Fixes: eb31628e37a0 ("netfilter: nf_tables: Add support for IPv6 NAT")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

MIPS: Make sparse_init() using top-down allocation

[ Upstream commit 269b3a9ac538c4ae87f84be640b9fa89914a2489 ]

In the current code, if CONFIG_SWIOTLB is set, when failed to get IO TLB
memory from the low pages by plat_swiotlb_setup(), it may lead to the boot
process failed with kernel panic.

(1) On the Loongson and SiByte platform
arch/mips/loongson64/dma.c
arch/mips/sibyte/common/dma.c
void __init plat_swiotlb_setup(void)
{
swiotlb_init(1);
}

kernel/dma/swiotlb.c
void  __init
swiotlb_init(int verbose)
{
...
vstart = memblock_alloc_low(PAGE_ALIGN(bytes), PAGE_SIZE);
if (vstart && !swiotlb_init_with_tbl(vstart, io_tlb_nslabs, verbose))
return;
...
pr_warn("Cannot allocate buffer");
no_iotlb_memory = true;
}

phys_addr_t swiotlb_tbl_map_single()
{
...
if (no_iotlb_memory)
panic("Can not allocate SWIOTLB buffer earlier ...");
...
}

(2) On the Cavium OCTEON platform
arch/mips/cavium-octeon/dma-octeon.c
void __init plat_swiotlb_setup(void)
{
...
octeon_swiotlb = memblock_alloc_low(swiotlbsize, PAGE_SIZE);
if (!octeon_swiotlb)
panic("%s: Failed to allocate %zu bytes align=%lx\n",
      __func__, swiotlbsize, PAGE_SIZE);
...
}

Because IO_TLB_DEFAULT_SIZE is 64M, if the rest size of low memory is less
than 64M when call plat_swiotlb_setup(), we can easily reproduce the panic
case.

In order to reduce the possibility of kernel panic when failed to get IO
TLB memory under CONFIG_SWIOTLB, it is better to allocate low memory as
small as possible before plat_swiotlb_setup(), so make sparse_init() using
top-down allocation.

Reported-by: Juxin Gao <gaojuxin@loongson.cn>
Co-developed-by: Juxin Gao <gaojuxin@loongson.cn>
Signed-off-by: Juxin Gao <gaojuxin@loongson.cn>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: dvb: return -EREMOTEIO on i2c transfer failure.

[ Upstream commit 96f3a9392799dd0f6472648a7366622ffd0989f3 ]

Currently when i2c transfers fail the error return -EREMOTEIO
is assigned to err but then later overwritten when the tuner
attach call is made.  Fix this by returning early with the
error return code -EREMOTEIO on i2c transfer failure errors.

If the transfer fails, an uninitialized value will be read from b2.

Addresses-Coverity: ("Unused value")

Fixes: fbfee8684ff2 ("V4L/DVB (5651): Dibusb-mb: convert pll handling to properly use dvb-pll")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

e1000: Distribute switch variables for initialization

[ Upstream commit a34c7f5156654ebaf7eaace102938be7ff7036cb ]

Variables declared in a switch statement before any case statements
cannot be automatically initialized with compiler instrumentation (as
they are not part of any execution flow). With GCC's proposed automatic
stack variable initialization feature, this triggers a warning (and they
don't get initialized). Clang's automatic stack variable initialization
(via CONFIG_INIT_STACK_ALL=y) doesn't throw a warning, but it also
doesn't initialize such variables[1]. Note that these warnings (or silent
skipping) happen before the dead-store elimination optimization phase,
so even when the automatic initializations are later elided in favor of
direct initializations, the warnings remain.

To avoid these problems, move such variables into the "case" where
they're used or lift them up into the main function body.

drivers/net/ethernet/intel/e1000/e1000_main.c: In function ‘e1000_xmit_frame’:
drivers/net/ethernet/intel/e1000/e1000_main.c:3143:18: warning: statement will never be executed [-Wswitch-unreachable]
 3143 |     unsigned int pull_size;
      |                  ^~~~~~~~~

[1] https://bugs.llvm.org/show_bug.cgi?id=44916

Signed-off-by: Kees Cook <keescook@chromium.org>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

staging: android: ion: use vmap instead of vm_map_ram

[ Upstream commit 5bf9917452112694b2c774465ee4dbe441c84b77 ]

vm_map_ram can keep mappings around after the vm_unmap_ram.  Using that
with non-PAGE_KERNEL mappings can lead to all kinds of aliasing issues.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Christophe Leroy <christophe.leroy@c-s.fr>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: David Airlie <airlied@linux.ie>
Cc: Gao Xiang <xiang@kernel.org>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Laura Abbott <labbott@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Kelley <mikelley@microsoft.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Sakari Ailus <sakari.ailus@linux.intel.com>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Wei Liu <wei.liu@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Paul Mackerras <paulus@ozlabs.org>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Link: http://lkml.kernel.org/r/20200414131348.444715-4-hch@lst.de
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: vmxnet3: fix possible buffer overflow caused by bad DMA value in vmxnet3_get_rss()

[ Upstream commit 3e1c6846b9e108740ef8a37be80314053f5dd52a ]

The value adapter->rss_conf is stored in DMA memory, and it is assigned
to rssConf, so rssConf->indTableSize can be modified at anytime by
malicious hardware. Because rssConf->indTableSize is assigned to n,
buffer overflow may occur when the code "rssConf->indTable[n]" is
executed.

To fix this possible bug, n is checked after being used.

Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: 8978/1: mm: make act_mm() respect THREAD_SIZE

[ Upstream commit e1de94380af588bdf6ad6f0cc1f75004c35bc096 ]

Recent work with KASan exposed the folling hard-coded bitmask
in arch/arm/mm/proc-macros.S:

  bic     rd, sp, #8128
  bic     rd, rd, #63

This forms the bitmask 0x1FFF that is coinciding with
(PAGE_SIZE << THREAD_SIZE_ORDER) - 1, this code was assuming
that THREAD_SIZE is always 8K (8192).

As KASan was increasing THREAD_SIZE_ORDER to 2, I ran into
this bug.

Fix it by this little oneline suggested by Ard:

  bic     rd, sp, #(THREAD_SIZE - 1) & ~63

Where THREAD_SIZE is defined using THREAD_SIZE_ORDER.

We have to also include <linux/const.h> since the THREAD_SIZE
expands to use the _AC() macro.

Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Suggested-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

btrfs: do not ignore error from btrfs_next_leaf() when inserting checksums

[ Upstream commit 7e4a3f7ed5d54926ec671bbb13e171cfe179cc50 ]

We are currently treating any non-zero return value from btrfs_next_leaf()
the same way, by going to the code that inserts a new checksum item in the
tree. However if btrfs_next_leaf() returns an error (a value < 0), we
should just stop and return the error, and not behave as if nothing has
happened, since in that case we do not have a way to know if there is a
next leaf or we are currently at the last leaf already.

So fix that by returning the error from btrfs_next_leaf().

Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clocksource: dw_apb_timer_of: Fix missing clockevent timers

[ Upstream commit 6d2e16a3181bafb77b535095c39ad1c8b9558c8c ]

Commit 100214889973 ("clocksource: dw_apb_timer_of: use
clocksource_of_init") replaced a publicly available driver
initialization method with one called by the timer_probe() method
available after CLKSRC_OF. In current implementation it traverses
all the timers available in the system and calls their initialization
methods if corresponding devices were either in dtb or in acpi. But
if before the commit any number of available timers would be installed
as clockevent and clocksource devices, after that there would be at most
two. The rest are just ignored since default case branch doesn't do
anything. I don't see a reason of such behaviour, neither the commit
message explains it. Moreover this might be wrong if on some platforms
these timers might be used for different purpose, as virtually CPU-local
clockevent timers and as an independent broadcast timer. So in order
to keep the compatibility with the platforms where the order of the
timers detection has some meaning, lets add the secondly discovered
timer to be of clocksource/sched_clock type, while the very first and
the others would provide the clockevents service.

Fixes: 100214889973 ("clocksource: dw_apb_timer_of: use clocksource_of_init")
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Paul Burton <paulburton@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: linux-mips@vger.kernel.org
Cc: linux-rtc@vger.kernel.org
Cc: devicetree@vger.kernel.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20200521204818.25436-7-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Sasha Levin <sashal@kernel.org>

spi: dw: Enable interrupts in accordance with DMA xfer mode

[ Upstream commit 43dba9f3f98c2b184a19f856f06fe22817bfd9e0 ]

It's pointless to track the Tx overrun interrupts if Rx-only SPI
transfer is issued. Similarly there is no need in handling the Rx
overrun/underrun interrupts if Tx-only SPI transfer is executed.
So lets unmask the interrupts only if corresponding SPI
transactions are implied.

Co-developed-by: Georgy Vlasov <Georgy.Vlasov@baikalelectronics.ru>
Signed-off-by: Georgy Vlasov <Georgy.Vlasov@baikalelectronics.ru>
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Cc: Ramil Zaripov <Ramil.Zaripov@baikalelectronics.ru>
Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Paul Burton <paulburton@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: linux-mips@vger.kernel.org
Cc: devicetree@vger.kernel.org
Link: https://lore.kernel.org/r/20200522000806.7381-3-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

kgdb: Prevent infinite recursive entries to the debugger

[ Upstream commit 3ca676e4ca60d1834bb77535dafe24169cadacef ]

If we detect that we recursively entered the debugger we should hack
our I/O ops to NULL so that the panic() in the next line won't
actually cause another recursion into the debugger.  The first line of
kgdb_panic() will check this and return.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://lore.kernel.org/r/20200507130644.v4.6.I89de39f68736c9de610e6f241e68d8dbc44bc266@changeid
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Bluetooth: Add SCO fallback for invalid LMP parameters error

[ Upstream commit 56b5453a86203a44726f523b4133c1feca49ce7c ]

Bluetooth PTS test case HFP/AG/ACC/BI-12-I accepts SCO connection
with invalid parameter at the first SCO request expecting AG to
attempt another SCO request with the use of "safe settings" for
given codec, base on section 5.7.1.2 of HFP 1.7 specification.

This patch addresses it by adding "Invalid LMP Parameters" (0x1e)
to the SCO fallback case. Verified with below log:

< HCI Command: Setup Synchronous Connection (0x01|0x0028) plen 17
        Handle: 256
        Transmit bandwidth: 8000
        Receive bandwidth: 8000
        Max latency: 13
        Setting: 0x0003
          Input Coding: Linear
          Input Data Format: 1's complement
          Input Sample Size: 8-bit
          # of bits padding at MSB: 0
          Air Coding Format: Transparent Data
        Retransmission effort: Optimize for link quality (0x02)
        Packet type: 0x0380
          3-EV3 may not be used
          2-EV5 may not be used
          3-EV5 may not be used
> HCI Event: Command Status (0x0f) plen 4
      Setup Synchronous Connection (0x01|0x0028) ncmd 1
        Status: Success (0x00)
> HCI Event: Number of Completed Packets (0x13) plen 5
        Num handles: 1
        Handle: 256
        Count: 1
> HCI Event: Max Slots Change (0x1b) plen 3
        Handle: 256
        Max slots: 1
> HCI Event: Synchronous Connect Complete (0x2c) plen 17
        Status: Invalid LMP Parameters / Invalid LL Parameters (0x1e)
        Handle: 0
        Address: 00:1B:DC:F2:21:59 (OUI 00-1B-DC)
        Link type: eSCO (0x02)
        Transmission interval: 0x00
        Retransmission window: 0x02
        RX packet length: 0
        TX packet length: 0
        Air mode: Transparent (0x03)
< HCI Command: Setup Synchronous Connection (0x01|0x0028) plen 17
        Handle: 256
        Transmit bandwidth: 8000
        Receive bandwidth: 8000
        Max latency: 8
        Setting: 0x0003
          Input Coding: Linear
          Input Data Format: 1's complement
          Input Sample Size: 8-bit
          # of bits padding at MSB: 0
          Air Coding Format: Transparent Data
        Retransmission effort: Optimize for link quality (0x02)
        Packet type: 0x03c8
          EV3 may be used
          2-EV3 may not be used
          3-EV3 may not be used
          2-EV5 may not be used
          3-EV5 may not be used
> HCI Event: Command Status (0x0f) plen 4
      Setup Synchronous Connection (0x01|0x0028) ncmd 1
        Status: Success (0x00)
> HCI Event: Max Slots Change (0x1b) plen 3
        Handle: 256
        Max slots: 5
> HCI Event: Max Slots Change (0x1b) plen 3
        Handle: 256
        Max slots: 1
> HCI Event: Synchronous Connect Complete (0x2c) plen 17
        Status: Success (0x00)
        Handle: 257
        Address: 00:1B:DC:F2:21:59 (OUI 00-1B-DC)
        Link type: eSCO (0x02)
        Transmission interval: 0x06
        Retransmission window: 0x04
        RX packet length: 30
        TX packet length: 30
        Air mode: Transparent (0x03)

Signed-off-by: Hsin-Yu Chao <hychao@chromium.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

spi: dw: Zero DMA Tx and Rx configurations on stack

[ Upstream commit 3cb97e223d277f84171cc4ccecab31e08b2ee7b5 ]

Some DMA controller drivers do not tolerate non-zero values in
the DMA configuration structures. Zero them to avoid issues with
such DMA controller drivers. Even despite above this is a good
practice per se.

Fixes: 7063c0d942a1 ("spi/dw_spi: add DMA support")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Feng Tang <feng.tang@intel.com>
Cc: Feng Tang <feng.tang@intel.com>
Link: https://lore.kernel.org/r/20200506153025.21441-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

can: kvaser_usb: kvaser_usb_leaf: Fix some info-leaks to USB devices

commit da2311a6385c3b499da2ed5d9be59ce331fa93e9 upstream.

Uninitialized Kernel memory can leak to USB devices.

Fix this by using kzalloc() instead of kmalloc().

Signed-off-by: Xiaolong Huang <butterflyhuangxx@gmail.com>
Fixes: 7259124eac7d ("can: kvaser_usb: Split driver into kvaser_usb_core.c and kvaser_usb_leaf.c")
Cc: linux-stable <stable@vger.kernel.org> # >= v4.19
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
[bwh: Backported to 4.9: adjust filename, context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fat: don't allow to mount if the FAT length == 0

commit b1b65750b8db67834482f758fc385bfa7560d228 upstream.

If FAT length == 0, the image doesn't have any data. And it can be the
cause of overlapping the root dir and FAT entries.

Also Windows treats it as invalid format.

Reported-by: syzbot+6f1624f937d9d6911e2d@syzkaller.appspotmail.com
Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Marco Elver <elver@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Link: http://lkml.kernel.org/r/87r1wz8mrd.fsf@mail.parknet.co.jp
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm/slub: fix a memory leak in sysfs_slab_add()

commit dde3c6b72a16c2db826f54b2d49bdea26c3534a2 upstream.

syzkaller reports for memory leak when kobject_init_and_add() returns an
error in the function sysfs_slab_add() [1]

When this happened, the function kobject_put() is not called for the
corresponding kobject, which potentially leads to memory leak.

This patch fixes the issue by calling kobject_put() even if
kobject_init_and_add() fails.

[1]
  BUG: memory leak
  unreferenced object 0xffff8880a6d4be88 (size 8):
  comm "syz-executor.3", pid 946, jiffies 4295772514 (age 18.396s)
  hex dump (first 8 bytes):
    70 69 64 5f 33 00 ff ff                          pid_3...
  backtrace:
     kstrdup+0x35/0x70 mm/util.c:60
     kstrdup_const+0x3d/0x50 mm/util.c:82
     kvasprintf_const+0x112/0x170 lib/kasprintf.c:48
     kobject_set_name_vargs+0x55/0x130 lib/kobject.c:289
     kobject_add_varg lib/kobject.c:384 [inline]
     kobject_init_and_add+0xd8/0x170 lib/kobject.c:473
     sysfs_slab_add+0x1d8/0x290 mm/slub.c:5811
     __kmem_cache_create+0x50a/0x570 mm/slub.c:4384
     create_cache+0x113/0x1e0 mm/slab_common.c:407
     kmem_cache_create_usercopy+0x1a1/0x260 mm/slab_common.c:505
     kmem_cache_create+0xd/0x10 mm/slab_common.c:564
     create_pid_cachep kernel/pid_namespace.c:54 [inline]
     create_pid_namespace kernel/pid_namespace.c:96 [inline]
     copy_pid_ns+0x77c/0x8f0 kernel/pid_namespace.c:148
     create_new_namespaces+0x26b/0xa30 kernel/nsproxy.c:95
     unshare_nsproxy_namespaces+0xa7/0x1e0 kernel/nsproxy.c:229
     ksys_unshare+0x3d2/0x770 kernel/fork.c:2969
     __do_sys_unshare kernel/fork.c:3037 [inline]
     __se_sys_unshare kernel/fork.c:3035 [inline]
     __x64_sys_unshare+0x2d/0x40 kernel/fork.c:3035
     do_syscall_64+0xa1/0x530 arch/x86/entry/common.c:295

Fixes: 80da026a8e5d ("mm/slub: fix slab double-free in case of duplicate sysfs filename")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Link: http://lkml.kernel.org/r/20200602115033.1054-1-wanghai38@huawei.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Smack: slab-out-of-bounds in vsscanf

commit 84e99e58e8d1e26f04c097f4266e431a33987f36 upstream.

Add barrier to soob. Return -EOVERFLOW if the buffer
is exceeded.

Suggested-by: Hillf Danton <hdanton@sina.com>
Reported-by: syzbot+bfdd4a2f07be52351350@syzkaller.appspotmail.com
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ath9k: Fix general protection fault in ath9k_hif_usb_rx_cb

commit 2bbcaaee1fcbd83272e29f31e2bb7e70d8c49e05 upstream.

In ath9k_hif_usb_rx_cb interface number is assumed to be 0.
usb_ifnum_to_if(urb->dev, 0)
But it isn't always true.

The case reported by syzbot:
https://lore.kernel.org/linux-usb/000000000000666c9c05a1c05d12@google.com
usb 2-1: new high-speed USB device number 2 using dummy_hcd
usb 2-1: config 1 has an invalid interface number: 2 but max is 0
usb 2-1: config 1 has no interface number 0
usb 2-1: New USB device found, idVendor=0cf3, idProduct=9271, bcdDevice=
1.08
usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
general protection fault, probably for non-canonical address
0xdffffc0000000015: 0000 [#1] SMP KASAN
KASAN: null-ptr-deref in range [0x00000000000000a8-0x00000000000000af]
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.6.0-rc5-syzkaller #0

Call Trace
__usb_hcd_giveback_urb+0x29a/0x550 drivers/usb/core/hcd.c:1650
usb_hcd_giveback_urb+0x368/0x420 drivers/usb/core/hcd.c:1716
dummy_timer+0x1258/0x32ae drivers/usb/gadget/udc/dummy_hcd.c:1966
call_timer_fn+0x195/0x6f0 kernel/time/timer.c:1404
expire_timers kernel/time/timer.c:1449 [inline]
__run_timers kernel/time/timer.c:1773 [inline]
__run_timers kernel/time/timer.c:1740 [inline]
run_timer_softirq+0x5f9/0x1500 kernel/time/timer.c:1786
__do_softirq+0x21e/0x950 kernel/softirq.c:292
invoke_softirq kernel/softirq.c:373 [inline]
irq_exit+0x178/0x1a0 kernel/softirq.c:413
exiting_irq arch/x86/include/asm/apic.h:546 [inline]
smp_apic_timer_interrupt+0x141/0x540 arch/x86/kernel/apic/apic.c:1146
apic_timer_interrupt+0xf/0x20 arch/x86/entry/entry_64.S:829

Reported-and-tested-by: syzbot+40d5d2e8a4680952f042@syzkaller.appspotmail.com
Signed-off-by: Qiujun Huang <hqjagain@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200404041838.10426-6-hqjagain@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ath9x: Fix stack-out-of-bounds Write in ath9k_hif_usb_rx_cb

commit 19d6c375d671ce9949a864fb9a03e19f5487b4d3 upstream.

Add barrier to accessing the stack array skb_pool.

The case reported by syzbot:
https://lore.kernel.org/linux-usb/0000000000003d7c1505a2168418@google.com
BUG: KASAN: stack-out-of-bounds in ath9k_hif_usb_rx_stream
drivers/net/wireless/ath/ath9k/hif_usb.c:626 [inline]
BUG: KASAN: stack-out-of-bounds in ath9k_hif_usb_rx_cb+0xdf6/0xf70
drivers/net/wireless/ath/ath9k/hif_usb.c:666
Write of size 8 at addr ffff8881db309a28 by task swapper/1/0

Call Trace:
ath9k_hif_usb_rx_stream drivers/net/wireless/ath/ath9k/hif_usb.c:626
[inline]
ath9k_hif_usb_rx_cb+0xdf6/0xf70
drivers/net/wireless/ath/ath9k/hif_usb.c:666
__usb_hcd_giveback_urb+0x1f2/0x470 drivers/usb/core/hcd.c:1648
usb_hcd_giveback_urb+0x368/0x420 drivers/usb/core/hcd.c:1713
dummy_timer+0x1258/0x32ae drivers/usb/gadget/udc/dummy_hcd.c:1966
call_timer_fn+0x195/0x6f0 kernel/time/timer.c:1404
expire_timers kernel/time/timer.c:1449 [inline]
__run_timers kernel/time/timer.c:1773 [inline]
__run_timers kernel/time/timer.c:1740 [inline]
run_timer_softirq+0x5f9/0x1500 kernel/time/timer.c:1786

Reported-and-tested-by: syzbot+d403396d4df67ad0bd5f@syzkaller.appspotmail.com
Signed-off-by: Qiujun Huang <hqjagain@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200404041838.10426-5-hqjagain@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ath9k: Fix use-after-free Write in ath9k_htc_rx_msg

commit e4ff08a4d727146bb6717a39a8d399d834654345 upstream.

Write out of slab bounds. We should check epid.

The case reported by syzbot:
https://lore.kernel.org/linux-usb/0000000000006ac55b05a1c05d72@google.com
BUG: KASAN: use-after-free in htc_process_conn_rsp
drivers/net/wireless/ath/ath9k/htc_hst.c:131 [inline]
BUG: KASAN: use-after-free in ath9k_htc_rx_msg+0xa25/0xaf0
drivers/net/wireless/ath/ath9k/htc_hst.c:443
Write of size 2 at addr ffff8881cea291f0 by task swapper/1/0

Call Trace:
 htc_process_conn_rsp drivers/net/wireless/ath/ath9k/htc_hst.c:131
[inline]
ath9k_htc_rx_msg+0xa25/0xaf0
drivers/net/wireless/ath/ath9k/htc_hst.c:443
ath9k_hif_usb_reg_in_cb+0x1ba/0x630
drivers/net/wireless/ath/ath9k/hif_usb.c:718
__usb_hcd_giveback_urb+0x29a/0x550 drivers/usb/core/hcd.c:1650
usb_hcd_giveback_urb+0x368/0x420 drivers/usb/core/hcd.c:1716
dummy_timer+0x1258/0x32ae drivers/usb/gadget/udc/dummy_hcd.c:1966
call_timer_fn+0x195/0x6f0 kernel/time/timer.c:1404
expire_timers kernel/time/timer.c:1449 [inline]
__run_timers kernel/time/timer.c:1773 [inline]
__run_timers kernel/time/timer.c:1740 [inline]
run_timer_softirq+0x5f9/0x1500 kernel/time/timer.c:1786

Reported-and-tested-by: syzbot+b1c61e5f11be5782f192@syzkaller.appspotmail.com
Signed-off-by: Qiujun Huang <hqjagain@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200404041838.10426-4-hqjagain@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>