net: amd-xgbe: Fix NETDEV WATCHDOG transmit queue timeout warning

[ Upstream commit 186edbb510bd60e748f93975989ccba25ee99c50 ]

The current driver calls netif_carrier_off() late in the link tear down
which can result in a netdev watchdog timeout.

Calling netif_carrier_off() immediately after netif_tx_stop_all_queues()
avoids the warning.

 ------------[ cut here ]------------
 NETDEV WATCHDOG: enp3s0f2 (amd-xgbe): transmit queue 0 timed out
 WARNING: CPU: 3 PID: 0 at net/sched/sch_generic.c:461 dev_watchdog+0x20d/0x220
 Modules linked in: amd_xgbe(E)  amd-xgbe 0000:03:00.2 enp3s0f2: Link is Down
 CPU: 3 PID: 0 Comm: swapper/3 Tainted: G            E
 Hardware name: AMD Bilby-RV2/Bilby-RV2, BIOS RBB1202A 10/18/2019
 RIP: 0010:dev_watchdog+0x20d/0x220
 Code: 00 49 63 4e e0 eb 92 4c 89 e7 c6 05 c6 e2 c1 00 01 e8 e7 ce fc ff 89 d9 48
 RSP: 0018:ffff90cfc28c3e88 EFLAGS: 00010286
 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000006
 RDX: 0000000000000007 RSI: 0000000000000086 RDI: ffff90cfc28d63c0
 RBP: ffff90cfb977845c R08: 0000000000000050 R09: 0000000000196018
 R10: ffff90cfc28c3ef8 R11: 0000000000000000 R12: ffff90cfb9778000
 R13: 0000000000000003 R14: ffff90cfb9778480 R15: 0000000000000010
 FS:  0000000000000000(0000) GS:ffff90cfc28c0000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 00007f240ff2d9d0 CR3: 00000001e3e0a000 CR4: 00000000003406e0
 Call Trace:
  <IRQ>
  ? pfifo_fast_reset+0x100/0x100
  call_timer_fn+0x2b/0x130
  run_timer_softirq+0x3e8/0x440
  ? enqueue_hrtimer+0x39/0x90

Fixes: e722ec82374b ("amd-xgbe: Update the BelFuse quirk to support SGMII")
Co-developed-by: Sudheesh Mavila <sudheesh.mavila@amd.com>
Signed-off-by: Sudheesh Mavila <sudheesh.mavila@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: amd-xgbe: Reset the PHY rx data path when mailbox command timeout

[ Upstream commit 30b7edc82ec82578f4f5e6706766f0a9535617d3 ]

Sometimes mailbox commands timeout when the RX data path becomes
unresponsive. This prevents the submission of new mailbox commands to DXIO.
This patch identifies the timeout and resets the RX data path so that the
next message can be submitted properly.

Fixes: 549b32af9f7c ("amd-xgbe: Simplify mailbox interface rate change code")
Co-developed-by: Sudheesh Mavila <sudheesh.mavila@amd.com>
Signed-off-by: Sudheesh Mavila <sudheesh.mavila@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ibmvnic: skip send_request_unmap for timeout reset

[ Upstream commit 7d3a7b9ea59ddb223aec59b45fa1713c633aaed4 ]

Timeout reset will trigger the VIOS to unmap it automatically,
similarly as FAILVOER and MOBILITY events. If we unmap it
in the linux side, we will see errors like
"30000003: Error 4 in REQUEST_UNMAP_RSP".
So, don't call send_request_unmap for timeout reset.

Fixes: ed651a10875f ("ibmvnic: Updated reset handling")
Signed-off-by: Lijun Pan <ljp@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ibmvnic: add memory barrier to protect long term buffer

[ Upstream commit 42557dab78edc8235aba5b441f2eb35f725a0ede ]

dma_rmb() barrier is added to load the long term buffer before copying
it to socket buffer; and dma_wmb() barrier is added to update the
long term buffer before it being accessed by VIOS (virtual i/o server).

Fixes: 032c5e82847a ("Driver for IBM System i/p VNIC protocol")
Signed-off-by: Lijun Pan <ljp@linux.ibm.com>
Acked-by: Thomas Falcon <tlfalcon@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

b43: N-PHY: Fix the update of coef for the PHY revision >= 3case

[ Upstream commit 4773acf3d4b50768bf08e9e97a204819e9ea0895 ]

The documentation for the PHY update [1] states:

Loop 4 times with index i

    If PHY Revision >= 3
        Copy table[i] to coef[i]
    Otherwise
        Set coef[i] to 0

the copy of the table to coef is currently implemented the wrong way
around, table is being updated from uninitialized values in coeff.
Fix this by swapping the assignment around.

[1] https://bcm-v4.sipsolutions.net/802.11/PHY/N/RestoreCal/

Fixes: 2f258b74d13c ("b43: N-PHY: implement restoring general configuration")
Addresses-Coverity: ("Uninitialized scalar variable")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cxgb4/chtls/cxgbit: Keeping the max ofld immediate data size same in cxgb4 and ulds

[ Upstream commit 2355a6773a2cb0d2dce13432dde78497f1d6617b ]

The Max imm data size in cxgb4 is not similar to the max imm data size
in the chtls. This caused an mismatch in output of is_ofld_imm() of
cxgb4 and chtls. So fixed this by keeping the max wreq size of imm data
same in both chtls and cxgb4 as MAX_IMM_OFLD_TX_DATA_WR_LEN.

As cxgb4's max imm. data value for ofld packets is changed to
MAX_IMM_OFLD_TX_DATA_WR_LEN. Using the same in cxgbit also.

Fixes: 36bedb3f2e5b8 ("crypto: chtls - Inline TLS record Tx")
Signed-off-by: Ayush Sawal <ayush.sawal@chelsio.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: axienet: Handle deferred probe on clock properly

[ Upstream commit 57baf8cc70ea4cf5503c9d42f31f6a86d7f5ff1a ]

This driver is set up to use a clock mapping in the device tree if it is
present, but still work without one for backward compatibility. However,
if getting the clock returns -EPROBE_DEFER, then we need to abort and
return that error from our driver initialization so that the probe can
be retried later after the clock is set up.

Move clock initialization to earlier in the process so we do not waste as
much effort if the clock is not yet available. Switch to use
devm_clk_get_optional and abort initialization on any error reported.
Also enable the clock regardless of whether the controller is using an MDIO
bus, as the clock is required in any case.

Fixes: 09a0354cadec267be7f ("net: axienet: Use clock framework to get device clock rate")
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tcp: fix SO_RCVLOWAT related hangs under mem pressure

[ Upstream commit f969dc5a885736842c3511ecdea240fbb02d25d9 ]

While commit 24adbc1676af ("tcp: fix SO_RCVLOWAT hangs with fat skbs")
fixed an issue vs too small sk_rcvbuf for given sk_rcvlowat constraint,
it missed to address issue caused by memory pressure.

1) If we are under memory pressure and socket receive queue is empty.
First incoming packet is allowed to be queued, after commit
76dfa6082032 ("tcp: allow one skb to be received per socket under memory pressure")

But we do not send EPOLLIN yet, in case tcp_data_ready() sees sk_rcvlowat
is bigger than skb length.

2) Then, when next packet comes, it is dropped, and we directly
call sk->sk_data_ready().

3) If application is using poll(), tcp_poll() will then use
tcp_stream_is_readable() and decide the socket receive queue is
not yet filled, so nothing will happen.

Even when sender retransmits packets, phases 2) & 3) repeat
and flow is effectively frozen, until memory pressure is off.

Fix is to consider tcp_under_memory_pressure() to take care
of global memory pressure or memcg pressure.

Fixes: 24adbc1676af ("tcp: fix SO_RCVLOWAT hangs with fat skbs")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Arjun Roy <arjunroy@google.com>
Suggested-by: Wei Wang <weiwan@google.com>
Reviewed-by: Wei Wang <weiwan@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf: Fix bpf_fib_lookup helper MTU check for SKB ctx

[ Upstream commit 2c0a10af688c02adcf127aad29e923e0056c6b69 ]

BPF end-user on Cilium slack-channel (Carlo Carraro) wants to use
bpf_fib_lookup for doing MTU-check, but *prior* to extending packet size,
by adjusting fib_params 'tot_len' with the packet length plus the expected
encap size. (Just like the bpf_check_mtu helper supports). He discovered
that for SKB ctx the param->tot_len was not used, instead skb->len was used
(via MTU check in is_skb_forwardable() that checks against netdev MTU).

Fix this by using fib_params 'tot_len' for MTU check. If not provided (e.g.
zero) then keep existing TC behaviour intact. Notice that 'tot_len' for MTU
check is done like XDP code-path, which checks against FIB-dst MTU.

V16:
- Revert V13 optimization, 2nd lookup is against egress/resulting netdev

V13:
- Only do ifindex lookup one time, calling dev_get_by_index_rcu().

V10:
- Use same method as XDP for 'tot_len' MTU check

Fixes: 4c79579b44b1 ("bpf: Change bpf_fib_lookup to return lookup status")
Reported-by: Carlo Carraro <colrack@gmail.com>
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/161287789444.790810.15247494756551413508.stgit@firesoul
Signed-off-by: Sasha Levin <sashal@kernel.org>

mac80211: fix potential overflow when multiplying to u32 integers

[ Upstream commit 6194f7e6473be78acdc5d03edd116944bdbb2c4e ]

The multiplication of the u32 variables tx_time and estimated_retx is
performed using a 32 bit multiplication and the result is stored in
a u64 result. This has a potential u32 overflow issue, so avoid this
by casting tx_time to a u64 to force a 64 bit multiply.

Addresses-Coverity: ("Unintentional integer overflow")
Fixes: 050ac52cbe1f ("mac80211: code for on-demand Hybrid Wireless Mesh Protocol")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20210205175352.208841-1-colin.king@canonical.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

xen/netback: fix spurious event detection for common event case

[ Upstream commit a3daf3d39132b405781be8d9ede0c449b244b64e ]

In case of a common event for rx and tx queue the event should be
regarded to be spurious if no rx and no tx requests are pending.

Unfortunately the condition for testing that is wrong causing to
decide a event being spurious if no rx OR no tx requests are
pending.

Fix that plus using local variables for rx/tx pending indicators in
order to split function calls and if condition.

Fixes: 23025393dbeb3b ("xen/netback: use lateeoi irq binding")
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Reviewed-by: Wei Liu <wl@xen.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bnxt_en: reverse order of TX disable and carrier off

[ Upstream commit 132e0b65dc2b8bfa9721bfce834191f24fd1d7ed ]

A TX queue can potentially immediately timeout after it is stopped
and the last TX timestamp on that queue was more than 5 seconds ago with
carrier still up.  Prevent these intermittent false TX timeouts
by bringing down carrier first before calling netif_tx_disable().

Fixes: c0c050c58d84 ("bnxt_en: New Broadcom ethernet driver.")
Signed-off-by: Edwin Peer <edwin.peer@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ibmvnic: Set to CLOSED state even on error

[ Upstream commit d4083d3c00f60a09ad82e3bf17ff57fec69c8aa6 ]

If set_link_state() fails for any reason, we still cleanup the adapter
state and cannot recover from a partial close anyway. So set the adapter
to CLOSED state. That way if a new soft/hard reset is processed, the
adapter will remain in the CLOSED state until the next ibmvnic_open().

Fixes: 01d9bd792d16 ("ibmvnic: Reorganize device close")
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com>
Reported-by: Abdul Haleem <abdhalee@in.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ath9k: fix data bus crash when setting nf_override via debugfs

[ Upstream commit 12c8f3d1cdd84f01ee777b756db9dddc1f1c9d17 ]

When trying to set the noise floor via debugfs, a "data bus error"
crash like the following can happen:

[   88.433133] Data bus error, epc == 80221c28, ra == 83314e60
[   88.438895] Oops[#1]:
[   88.441246] CPU: 0 PID: 7263 Comm: sh Not tainted 4.14.195 #0
[   88.447174] task: 838a1c20 task.stack: 82d5e000
[   88.451847] $ 0   : 00000000 00000030 deadc0de 83141de4
[   88.457248] $ 4   : b810a2c4 0000a2c4 83230fd4 00000000
[   88.462652] $ 8   : 0000000a 00000000 00000001 00000000
[   88.468055] $12   : 7f8ef318 00000000 00000000 77f802a0
[   88.473457] $16   : 83230080 00000002 0000001b 83230080
[   88.478861] $20   : 83a1c3f8 00841000 77f7adb0 ffffff92
[   88.484263] $24   : 00000fa4 77edd860
[   88.489665] $28   : 82d5e000 82d5fda8 00000000 83314e60
[   88.495070] Hi    : 00000000
[   88.498044] Lo    : 00000000
[   88.501040] epc   : 80221c28 ioread32+0x8/0x10
[   88.505671] ra    : 83314e60 ath9k_hw_loadnf+0x88/0x520 [ath9k_hw]
[   88.512049] Status: 1000fc03 KERNEL EXL IE
[   88.516369] Cause : 5080801c (ExcCode 07)
[   88.520508] PrId  : 00019374 (MIPS 24Kc)
[   88.524556] Modules linked in: ath9k ath9k_common pppoe ppp_async l2tp_ppp cdc_mbim batman_adv ath9k_hw ath sr9700 smsc95xx sierra_net rndis_host qmi_wwan pppox ppp_generic pl2303 nf_conntrack_ipv6 mcs7830 mac80211 kalmia iptable_nat ipt_REJECT ipt_MASQUERADE huawei_cdc_ncm ftdi_sio dm9601 cfg80211 cdc_subset cdc_ncm cdc_ether cdc_eem ax88179_178a asix xt_time xt_tcpudp xt_tcpmss xt_statistic xt_state xt_nat xt_multiport xt_mark xt_mac xt_limit xt_length xt_hl xt_ecn xt_dscp xt_conntrack xt_comment xt_TCPMSS xt_REDIRECT xt_NETMAP xt_LOG xt_HL xt_FLOWOFFLOAD xt_DSCP xt_CLASSIFY usbserial usbnet usbhid slhc rtl8150 r8152 pegasus nf_reject_ipv4 nf_nat_redirect nf_nat_masquerade_ipv4 nf_conntrack_ipv4 nf_nat_ipv4 nf_nat nf_log_ipv4 nf_flow_table_hw nf_flow_table nf_defrag_ipv6 nf_defrag_ipv4 nf_conntrack
[   88.597894]  libcrc32c kaweth iptable_mangle iptable_filter ipt_ECN ipheth ip_tables hso hid_generic crc_ccitt compat cdc_wdm cdc_acm br_netfilter hid evdev input_core nf_log_ipv6 nf_log_common ip6table_mangle ip6table_filter ip6_tables ip6t_REJECT x_tables nf_reject_ipv6 l2tp_netlink l2tp_core udp_tunnel ip6_udp_tunnel xfrm6_mode_tunnel xfrm6_mode_transport xfrm6_mode_beet ipcomp6 xfrm6_tunnel esp6 ah6 xfrm4_tunnel xfrm4_mode_tunnel xfrm4_mode_transport xfrm4_mode_beet ipcomp esp4 ah4 tunnel6 tunnel4 tun xfrm_user xfrm_ipcomp af_key xfrm_algo sha256_generic sha1_generic jitterentropy_rng drbg md5 hmac echainiv des_generic deflate zlib_inflate zlib_deflate cbc authenc crypto_acompress ehci_platform ehci_hcd gpio_button_hotplug usbcore nls_base usb_common crc16 mii aead crypto_null cryptomgr crc32c_generic
[   88.671671]  crypto_hash
[   88.674292] Process sh (pid: 7263, threadinfo=82d5e000, task=838a1c20, tls=77f81efc)
[   88.682279] Stack : 00008060 00000008 00000200 00000000 00000000 00000000 00000000 00000002
[   88.690916]         80500000 83230080 82d5fe22 00841000 77f7adb0 00000000 00000000 83156858
[   88.699553]         00000000 8352fa00 83ad62b0 835302a8 00000000 300a00f8 00000003 82d5fe38
[   88.708190]         82d5fef4 00000001 77f54dc4 77f80000 77f7adb0 c79fe901 00000000 00000000
[   88.716828]         80510000 00000002 00841000 77f54dc4 77f80000 801ce4cc 0000000b 41824292
[   88.725465]         ...
[   88.727994] Call Trace:
[   88.730532] [<80221c28>] ioread32+0x8/0x10
[   88.734765] Code: 00000000  8c820000  0000000f <03e00008> 00000000  08088708  00000000  aca40000  03e00008
[   88.744846]
[   88.746464] ---[ end trace db226b2de1b69b9e ]---
[   88.753477] Kernel panic - not syncing: Fatal exception
[   88.759981] Rebooting in 3 seconds..

The "REG_READ(ah, AR_PHY_AGC_CONTROL)" in ath9k_hw_loadnf() does not
like being called when the hardware is asleep, leading to this crash.

The easiest way to reproduce this is trying to set nf_override while
the hardware is down:

  $ ip link set down dev wlan0
  $ echo "-85" > /sys/kernel/debug/ieee80211/phy0/ath9k/nf_override

Fixing this crash by waking the hardware up before trying to set the
noise floor. Similar to what other ath9k debugfs files do.

Tested on a Lima board from 8devices, which has a QCA 4531 chipset.

Fixes: b90189759a7f ("ath9k: add noise floor override option")
Cc: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Linus Lüssing <ll@simonwunderlich.de>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210209184352.4272-1-linus.luessing@c0d3.blue
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf_lru_list: Read double-checked variable once without lock

[ Upstream commit 6df8fb83301d68ea0a0c0e1cbcc790fcc333ed12 ]

For double-checked locking in bpf_common_lru_push_free(), node->type is
read outside the critical section and then re-checked under the lock.
However, concurrent writes to node->type result in data races.

For example, the following concurrent access was observed by KCSAN:

  write to 0xffff88801521bc22 of 1 bytes by task 10038 on cpu 1:
   __bpf_lru_node_move_in        kernel/bpf/bpf_lru_list.c:91
   __local_list_flush            kernel/bpf/bpf_lru_list.c:298
   ...
  read to 0xffff88801521bc22 of 1 bytes by task 10043 on cpu 0:
   bpf_common_lru_push_free      kernel/bpf/bpf_lru_list.c:507
   bpf_lru_push_free             kernel/bpf/bpf_lru_list.c:555
   ...

Fix the data races where node->type is read outside the critical section
(for double-checked locking) by marking the access with READ_ONCE() as
well as ensuring the variable is only accessed once.

Fixes: 3a08c2fd7634 ("bpf: LRU List")
Reported-by: syzbot+3536db46dfa58c573458@syzkaller.appspotmail.com
Reported-by: syzbot+516acdb03d3e27d91bcd@syzkaller.appspotmail.com
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20210209112701.3341724-1-elver@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

soc: aspeed: snoop: Add clock control logic

[ Upstream commit 3f94cf15583be554df7aaa651b8ff8e1b68fbe51 ]

If LPC SNOOP driver is registered ahead of lpc-ctrl module, LPC
SNOOP block will be enabled without heart beating of LCLK until
lpc-ctrl enables the LCLK. This issue causes improper handling on
host interrupts when the host sends interrupt in that time frame.
Then kernel eventually forcibly disables the interrupt with
dumping stack and printing a 'nobody cared this irq' message out.

To prevent this issue, all LPC sub-nodes should enable LCLK
individually so this patch adds clock control logic into the LPC
SNOOP driver.

Fixes: 3772e5da4454 ("drivers/misc: Aspeed LPC snoop output using misc chardev")
Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@intel.com>
Signed-off-by: Vernon Mauery <vernon.mauery@linux.intel.com>
Signed-off-by: John Wang <wangzhiqiang.bj@bytedance.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20201208091748.1920-1-wangzhiqiang.bj@bytedance.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: s3c: fix fiq for clang IAS

[ Upstream commit 7f9942c61fa60eda7cc8e42f04bd25b7d175876e ]

Building with the clang integrated assembler produces a couple of
errors for the s3c24xx fiq support:

  arch/arm/mach-s3c/irq-s3c24xx-fiq.S:52:2: error: instruction 'subne' can not set flags, but 's' suffix specified
    subnes pc, lr, #4 @@ return, still have work to do

  arch/arm/mach-s3c/irq-s3c24xx-fiq.S:64:1: error: invalid symbol redefinition
    s3c24xx_spi_fiq_txrx:

There are apparently two problems: one with extraneous or duplicate
labels, and one with old-style opcode mnemonics. Stefan Agner has
previously fixed other problems like this, but missed this particular
file.

Fixes: bec0806cfec6 ("spi_s3c24xx: add FIQ pseudo-DMA support")
Cc: Stefan Agner <stefan@agner.ch>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20210204162416.3030114-1-arnd@kernel.org
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: msm8916: Fix reserved and rfsa nodes unit address

[ Upstream commit d5ae2528b0b56cf054b27d48b0cb85330900082f ]

Fix `reserved` and `rfsa` unit address according to their reg address

Fixes: 7258e10e6a0b ("ARM: dts: msm8916: Update reserved-memory")
Signed-off-by: Vincent Knecht <vincent.knecht@mailoo.org>
Link: https://lore.kernel.org/r/20210123104417.518105-1-vincent.knecht@mailoo.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Bluetooth: btusb: Fix memory leak in btusb_mtk_wmt_recv

[ Upstream commit de71a6cb4bf24d8993b9ca90d1ddb131b60251a1 ]

In btusb_mtk_wmt_recv if skb_clone fails, the alocated skb should be
released.

Omit the labels “err_out” and “err_free_skb” in this function
implementation so that the desired exception handling code
would be directly specified in the affected if branches.

Fixes: a1c49c434e15 ("btusb: Add protocol support for MediaTek MT7668U USB devices")
Signed-off-by: Jupeng Zhong <zhongjupeng@yulong.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: armada-3720-turris-mox: rename u-boot mtd partition to a53-firmware

[ Upstream commit a9d9bfcadfb43b856dbcf9419de75f7420d5a225 ]

The partition called "u-boot" in reality contains TF-A and U-Boot, and
TF-A is before U-Boot.

Rename this parition to "a53-firmware" to avoid confusion for users,
since they cannot simply build U-Boot from U-Boot repository and flash
the resulting image there. Instead they have to build the firmware with
the sources from the mox-boot-builder repository [1] and flash the
a53-firmware.bin binary there.

[1] https://gitlab.nic.cz/turris/mox-boot-builder

Signed-off-by: Marek Behún <kabel@kernel.org>
Fixes: 7109d817db2e ("arm64: dts: marvell: add DTS for Turris Mox")
Cc: Gregory CLEMENT <gregory.clement@bootlin.com>
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: armada388-helios4: assign pinctrl to each fan

[ Upstream commit 46ecdfc1830eaa40a11d7f832089c82b0e67ea96 ]

Split up the pins for each fan. This is needed in order to control them

Fixes: ced8025b569e ("ARM: dts: armada388-helios4")
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: armada388-helios4: assign pinctrl to LEDs

[ Upstream commit e011c9025a4691b5c734029577a920bd6c320994 ]

Split up the pins to match earlier definitions. Allows LEDs to flash
properly.

Fixes: ced8025b569e ("ARM: dts: armada388-helios4")
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

staging: rtl8723bs: wifi_regd.c: Fix incorrect number of regulatory rules

[ Upstream commit 61834c967a929f6b4b7fcb91f43fa225cc29aa19 ]

The custom regulatory ruleset in the rtl8723bs driver lists an incorrect
number of rules: one too many. This results in an out-of-bounds access,
as detected by KASAN. This was possible thanks to the newly added support
for KASAN on ARMv7.

Fix this by filling in the correct number of rules given.

KASAN report:

==================================================================
BUG: KASAN: global-out-of-bounds in cfg80211_does_bw_fit_range+0x14/0x4c [cfg80211]
Read of size 4 at addr bf20c254 by task ip/971

CPU: 2 PID: 971 Comm: ip Tainted: G         C        5.11.0-rc2-00020-gf7fe528a7ebe #1
Hardware name: Allwinner sun8i Family
[<c0113338>] (unwind_backtrace) from [<c010e8a4>] (show_stack+0x10/0x14)
[<c010e8a4>] (show_stack) from [<c0e0f868>] (dump_stack+0x9c/0xb4)
[<c0e0f868>] (dump_stack) from [<c0388284>] (print_address_description.constprop.2+0x1dc/0x2dc)
[<c0388284>] (print_address_description.constprop.2) from [<c03885cc>] (kasan_report+0x1a8/0x1c4)
[<c03885cc>] (kasan_report) from [<bf00a354>] (cfg80211_does_bw_fit_range+0x14/0x4c [cfg80211])
[<bf00a354>] (cfg80211_does_bw_fit_range [cfg80211]) from [<bf00b41c>] (freq_reg_info_regd.part.6+0x108/0x124 [>
[<bf00b41c>] (freq_reg_info_regd.part.6 [cfg80211]) from [<bf00df00>] (handle_channel_custom.constprop.12+0x48/>
[<bf00df00>] (handle_channel_custom.constprop.12 [cfg80211]) from [<bf00e150>] (wiphy_apply_custom_regulatory+0>
[<bf00e150>] (wiphy_apply_custom_regulatory [cfg80211]) from [<bf1fb9e8>] (rtw_regd_init+0x60/0x70 [r8723bs])
[<bf1fb9e8>] (rtw_regd_init [r8723bs]) from [<bf1ee5a8>] (rtw_cfg80211_init_wiphy+0x164/0x1e8 [r8723bs])
[<bf1ee5a8>] (rtw_cfg80211_init_wiphy [r8723bs]) from [<bf1f8d50>] (_netdev_open+0xe4/0x28c [r8723bs])
[<bf1f8d50>] (_netdev_open [r8723bs]) from [<bf1f8f58>] (netdev_open+0x60/0x88 [r8723bs])
[<bf1f8f58>] (netdev_open [r8723bs]) from [<c0bb3730>] (__dev_open+0x178/0x220)
[<c0bb3730>] (__dev_open) from [<c0bb3cdc>] (__dev_change_flags+0x258/0x2c4)
[<c0bb3cdc>] (__dev_change_flags) from [<c0bb3d88>] (dev_change_flags+0x40/0x80)
[<c0bb3d88>] (dev_change_flags) from [<c0bc86fc>] (do_setlink+0x538/0x1160)
[<c0bc86fc>] (do_setlink) from [<c0bcf9e8>] (__rtnl_newlink+0x65c/0xad8)
[<c0bcf9e8>] (__rtnl_newlink) from [<c0bcfeb0>] (rtnl_newlink+0x4c/0x6c)
[<c0bcfeb0>] (rtnl_newlink) from [<c0bc67c8>] (rtnetlink_rcv_msg+0x1f8/0x454)
[<c0bc67c8>] (rtnetlink_rcv_msg) from [<c0c330e4>] (netlink_rcv_skb+0xc4/0x1e0)
[<c0c330e4>] (netlink_rcv_skb) from [<c0c32478>] (netlink_unicast+0x2c8/0x3c4)
[<c0c32478>] (netlink_unicast) from [<c0c32894>] (netlink_sendmsg+0x320/0x5f0)
[<c0c32894>] (netlink_sendmsg) from [<c0b75eb0>] (____sys_sendmsg+0x320/0x3e0)
[<c0b75eb0>] (____sys_sendmsg) from [<c0b78394>] (___sys_sendmsg+0xe8/0x12c)
[<c0b78394>] (___sys_sendmsg) from [<c0b78a50>] (__sys_sendmsg+0xc0/0x120)
[<c0b78a50>] (__sys_sendmsg) from [<c0100060>] (ret_fast_syscall+0x0/0x58)
Exception stack(0xc5693fa8 to 0xc5693ff0)
3fa0:                   00000074 c7a39800 00000003 b6cee648 00000000 00000000
3fc0: 00000074 c7a39800 00000001 00000128 78d18349 00000000 b6ceeda0 004f7cb0
3fe0: 00000128 b6cee5e8 aeca151f aec1d746

The buggy address belongs to the variable:
 rtw_drv_halt+0xf908/0x6b4 [r8723bs]

Memory state around the buggy address:
 bf20c100: 00 00 00 00 00 00 00 00 00 00 04 f9 f9 f9 f9 f9
 bf20c180: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>bf20c200: 00 00 00 00 00 00 00 00 00 00 04 f9 f9 f9 f9 f9
                                         ^
 bf20c280: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 bf20c300: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
==================================================================

Fixes: 554c0a3abf21 ("staging: Add rtl8723bs sdio wifi driver")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Link: https://lore.kernel.org/r/20210108141401.31741-1-wens@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: dwc2: Make "trimming xfer length" a debug message

[ Upstream commit 1a9e38cabd80356ffb98c2c88fec528ea9644fd5 ]

With some USB network adapters, such as DM96xx, the following message
is seen for each maximum size receive packet.

dwc2 ff540000.usb: dwc2_update_urb_state(): trimming xfer length

This happens because the packet size requested by the driver is 1522
bytes, wMaxPacketSize is 64, the dwc2 driver configures the chip to
receive 24*64 = 1536 bytes, and the chip does indeed send more than
1522 bytes of data. Since the event does not indicate an error condition,
the message is just noise. Demote it to debug level.

Fixes: 7359d482eb4d3 ("staging: HCD files for the DWC2 driver")
Tested-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Link: https://lore.kernel.org/r/20210113112052.17063-4-nsaenzjulienne@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: dwc2: Abort transaction after errors with unknown reason

[ Upstream commit f74b68c61cbc4b2245022fcce038509333d63f6f ]

In some situations, the following error messages are reported.

dwc2 ff540000.usb: dwc2_hc_chhltd_intr_dma: Channel 1 - ChHltd set, but reason is unknown
dwc2 ff540000.usb: hcint 0x00000002, intsts 0x04000021

This is sometimes followed by:

dwc2 ff540000.usb: dwc2_update_urb_state_abn(): trimming xfer length

and then:

WARNING: CPU: 0 PID: 0 at kernel/v4.19/drivers/usb/dwc2/hcd.c:2913
dwc2_assign_and_init_hc+0x98c/0x990

The warning suggests that an odd buffer address is to be used for DMA.

After an error is observed, the receive buffer may be full
(urb->actual_length >= urb->length). However, the urb is still left in
the queue unless three errors were observed in a row. When it is queued
again, the dwc2 hcd code translates this into a 1-block transfer.
If urb->actual_length (ie the total expected receive length) is not
DMA-aligned, the buffer pointer programmed into the chip will be
unaligned. This results in the observed warning.

To solve the problem, abort input transactions after an error with
unknown cause if the entire packet was already received. This may be
a bit drastic, but we don't really know why the transfer was aborted
even though the entire packet was received. Aborting the transfer in
this situation is less risky than accepting a potentially corrupted
packet.

With this patch in place, the 'ChHltd set' and 'trimming xfer length'
messages are still observed, but there are no more transfer attempts
with odd buffer addresses.

Fixes: 151d0cbdbe860 ("usb: dwc2: make the scheduler handle excessive NAKs better")
Cc: Boris ARZUR <boris@konbu.org>
Cc: Douglas Anderson <dianders@chromium.org>
Tested-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Link: https://lore.kernel.org/r/20210113112052.17063-3-nsaenzjulienne@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: dwc2: Do not update data length if it is 0 on inbound transfers

[ Upstream commit 415fa1c7305dedbb345e2cc8ac91769bc1c83f1a ]

The DWC2 documentation states that transfers with zero data length should
set the number of packets to 1 and the transfer length to 0. This is not
currently the case for inbound transfers: the transfer length is set to
the maximum packet length. This can have adverse effects if the chip
actually does transfer data as it is programmed to do. Follow chip
documentation and keep the transfer length set to 0 in that situation.

Fixes: 56f5b1cff22a1 ("staging: Core files for the DWC2 driver")
Tested-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Link: https://lore.kernel.org/r/20210113112052.17063-2-nsaenzjulienne@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: Configure missing thermal interrupt for 4430

[ Upstream commit 44f416879a442600b006ef7dec3a6dc98bcf59c6 ]

We have gpio_86 wired internally to the bandgap thermal shutdown
interrupt on 4430 like we have it on 4460 according to the TRM.
This can be found easily by searching for TSHUT.

For some reason the thermal shutdown interrupt was never added
for 4430, let's add it. I believe this is needed for the thermal
shutdown interrupt handler ti_bandgap_tshut_irq_handler() to call
orderly_poweroff().

Fixes: aa9bb4bb8878 ("arm: dts: add omap4430 thermal data")
Cc: Carl Philipp Klemm <philipp@uvos.xyz>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Eduardo Valentin <edubezval@gmail.com>
Cc: Merlijn Wajer <merlijn@wizzup.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Cc: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

memory: ti-aemif: Drop child node when jumping out loop

[ Upstream commit 94e9dd43cf327366388c8f146bccdc6322c0d999 ]

Call of_node_put() to decrement the reference count of the child node
child_np when jumping out of the loop body of
for_each_available_child_of_node(), which is a macro that increments and
decrements the reference count of child node. If the loop is broken, the
reference of the child node should be dropped manually.

Fixes: 5a7c81547c1d ("memory: ti-aemif: introduce AEMIF driver")
Signed-off-by: Pan Bian <bianpan2016@163.com>
Link: https://lore.kernel.org/r/20210121090359.61763-1-bianpan2016@163.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Bluetooth: Put HCI device if inquiry procedure interrupts

[ Upstream commit 28a758c861ff290e39d4f1ee0aa5df0f0b9a45ee ]

Jump to the label done to decrement the reference count of HCI device
hdev on path that the Inquiry procedure is interrupted.

Fixes: 3e13fa1e1fab ("Bluetooth: Fix hci_inquiry ioctl usage")
Signed-off-by: Pan Bian <bianpan2016@163.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Bluetooth: drop HCI device reference before return

[ Upstream commit 5a3ef03afe7e12982dc3b978f4c5077c907f7501 ]

Call hci_dev_put() to decrement reference count of HCI device hdev if
fails to duplicate memory.

Fixes: 0b26ab9dce74 ("Bluetooth: AMP: Handle Accept phylink command status evt")
Signed-off-by: Pan Bian <bianpan2016@163.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: gadget: u_audio: Free requests only after callback

[ Upstream commit 7de8681be2cde9f6953d3be1fa6ce05f9fe6e637 ]

As per the kernel doc for usb_ep_dequeue(), it states that "this
routine is asynchronous, that is, it may return before the completion
routine runs". And indeed since v5.0 the dwc3 gadget driver updated
its behavior to place dequeued requests on to a cancelled list to be
given back later after the endpoint is stopped.

The free_ep() was incorrectly assuming that a request was ready to
be freed after calling dequeue which results in a use-after-free
in dwc3 when it traverses its cancelled list. Fix this by moving
the usb_ep_free_request() call to the callback itself in case the
ep is disabled.

Fixes: eb9fecb9e69b0 ("usb: gadget: f_uac2: split out audio core")
Reported-and-tested-by: Ferry Toth <fntoth@gmail.com>
Reviewed-and-tested-by: Peter Chen <peter.chen@nxp.com>
Acked-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Jack Pham <jackp@codeaurora.org>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20210118084642.322510-2-jbrunet@baylibre.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ACPICA: Fix exception code class checks

[ Upstream commit 3dfaea3811f8b6a89a347e8da9ab862cdf3e30fe ]

ACPICA commit 1a3a549286ea9db07d7ec700e7a70dd8bcc4354e

The macros to classify different AML exception codes are broken. For
instance,

  ACPI_ENV_EXCEPTION(Status)

will always evaluate to zero due to

  #define AE_CODE_ENVIRONMENTAL      0x0000
  #define ACPI_ENV_EXCEPTION(Status) (Status & AE_CODE_ENVIRONMENTAL)

Similarly, ACPI_AML_EXCEPTION(Status) will evaluate to a non-zero
value for error codes of type AE_CODE_PROGRAMMER, AE_CODE_ACPI_TABLES,
as well as AE_CODE_AML, and not just AE_CODE_AML as the name suggests.

This commit fixes those checks.

Fixes: d46b6537f0ce ("ACPICA: AML Parser: ignore all exceptions resulting from incorrect AML during table load")
Link: https://github.com/acpica/acpica/commit/1a3a5492
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cpufreq: brcmstb-avs-cpufreq: Fix resource leaks in ->remove()

[ Upstream commit 3657f729b6fb5f2c0bf693742de2dcd49c572aa1 ]

If 'cpufreq_unregister_driver()' fails, just WARN and continue, so that
other resources are freed.

Fixes: de322e085995 ("cpufreq: brcmstb-avs-cpufreq: AVS CPUfreq driver for Broadcom STB SoCs")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
[ Viresh: Updated Subject ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cpufreq: brcmstb-avs-cpufreq: Free resources in error path

[ Upstream commit 05f456286fd489558c72a4711d22a5612c965685 ]

If 'cpufreq_register_driver()' fails, we must release the resources
allocated in 'brcm_avs_prepare_init()' as already done in the remove
function.

To do that, introduce a new function 'brcm_avs_prepare_uninit()' in order
to avoid code duplication. This also makes the code more readable (IMHO).

Fixes: de322e085995 ("cpufreq: brcmstb-avs-cpufreq: AVS CPUfreq driver for Broadcom STB SoCs")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
[ Viresh: Updated Subject ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: allwinner: A64: Limit MMC2 bus frequency to 150 MHz

[ Upstream commit 948c657cc45e8ce48cb533d4e2106145fa765759 ]

In contrast to the H6 (and later) manuals, the A64 datasheet does not
specify any limitations in the maximum possible frequency for eMMC
controllers.
However experimentation has found that a 150 MHz limit similar to other
SoCs and also the MMC0 and MMC1 controllers on the A64 seems to exist
for the MMC2 controller.

Limit the frequency for the MMC2 controller to 150 MHz in the SoC .dtsi.
The Pinebook seems to be the an odd exception, since it apparently seems
to work with 200 MHz as well, so overwrite this in its board .dts file.

Tested on a Pine64-LTS: 200 MHz HS-200 fails, 150 MHz HS-200 works.

Fixes: 22be992faea7 ("arm64: allwinner: a64: Increase the MMC max frequency")
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20210113152630.28810-7-andre.przywara@arm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: allwinner: H6: Allow up to 150 MHz MMC bus frequency

[ Upstream commit cfe6c487b9a1abc6197714ec5605716a5428cf03 ]

The H6 manual explicitly lists a frequency limit of 150 MHz for the bus
frequency of the MMC controllers. So far we had no explicit limits in the
DT, which limited eMMC to the spec defined frequencies, or whatever the
driver defines (both Linux and FreeBSD use 52 MHz here).

Put those maximum frequencies in the SoC .dtsi, to allow higher speed
modes (which still would need to be explicitly enabled, per board).

Tested with an eMMC using HS-200 on a Pine H64. Running at the spec'ed
200 MHz indeed fails with I/O errors, but 150 MHz seems to work stably.

Fixes: 8f54bd1595b3 ("arm64: allwinner: h6: add device tree nodes for MMC controllers")
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20210113152630.28810-6-andre.przywara@arm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: allwinner: Drop non-removable from SoPine/LTS SD card

[ Upstream commit 941432d007689f3774646e41a1439228b6c6ee0e ]

The SD card on the SoPine SoM module is somewhat concealed, so was
originally defined as "non-removable".
However there is a working card-detect pin (tested on two different
SoM versions), and in certain SoM base boards it might be actually
accessible at runtime.
Also the Pine64-LTS shares the SoPine base .dtsi, so inherited the
non-removable flag, even though the SD card slot is perfectly accessible
and usable there. (It turns out that just *my* board has a broken card
detect switch, so I originally thought CD wouldn't work on the LTS.)

Drop the "non-removable" flag to describe the SD card slot properly.

Fixes: c3904a269891 ("arm64: allwinner: a64: add DTSI file for SoPine SoM")
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20210113152630.28810-5-andre.przywara@arm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: allwinner: H6: properly connect USB PHY to port 0

[ Upstream commit da2fb8457f71138d455cba82edec0d34f858e506 ]

In recent Allwinner SoCs the first USB host controller (HCI0) shares
the first PHY with the MUSB controller. Probably to make this sharing
work, we were avoiding to declare this in the DT. This has two
shortcomings:
- U-Boot (which uses the same .dts) cannot use this port in host mode
  without a PHY linked, so we were loosing one USB port there.
- It requires the MUSB driver to be enabled and loaded, although we
  don't actually use it.

To avoid those issues, let's add this PHY link to the H6 .dtsi file.
After all PHY port 0 *is* connected to HCI0, so we should describe
it as this.

This makes it work in U-Boot, also improves compatiblity when no MUSB
driver is loaded (for instance in distribution installers).

Fixes: eabb3d424b6d ("arm64: dts: allwinner: h6: add USB2-related device nodes")
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20210113152630.28810-3-andre.przywara@arm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: allwinner: A64: properly connect USB PHY to port 0

[ Upstream commit cc72570747e43335f4933a24dd74d5653639176a ]

In recent Allwinner SoCs the first USB host controller (HCI0) shares
the first PHY with the MUSB controller. Probably to make this sharing
work, we were avoiding to declare this in the DT. This has two
shortcomings:
- U-Boot (which uses the same .dts) cannot use this port in host mode
  without a PHY linked, so we were loosing one USB port there.
- It requires the MUSB driver to be enabled and loaded, although we
  don't actually use it.

To avoid those issues, let's add this PHY link to the A64 .dtsi file.
After all PHY port 0 *is* connected to HCI0, so we should describe
it as this. Remove the part from the Pinebook DTS which already had
this property.

This makes it work in U-Boot, also improves compatiblity when no MUSB
driver is loaded (for instance in distribution installers).

Fixes: dc03a047df1d ("arm64: allwinner: a64: add EHCI0/OHCI0 nodes to A64 DTSI")
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20210113152630.28810-2-andre.przywara@arm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf: Avoid warning when re-casting __bpf_call_base into __bpf_call_base_args

[ Upstream commit 6943c2b05bf09fd5c5729f7d7d803bf3f126cb9a ]

BPF interpreter uses extra input argument, so re-casts __bpf_call_base into
__bpf_call_base_args. Avoid compiler warning about incompatible function
prototypes by casting to void * first.

Fixes: 1ea47e01ad6e ("bpf: add support for bpf_call to interpreter")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210112075520.4103414-3-andrii@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf: Add bpf_patch_call_args prototype to include/linux/bpf.h

[ Upstream commit a643bff752dcf72a07e1b2ab2f8587e4f51118be ]

Add bpf_patch_call_args() prototype. This function is called from BPF verifier
and only if CONFIG_BPF_JIT_ALWAYS_ON is not defined. This fixes compiler
warning about missing prototype in some kernel configurations.

Fixes: 1ea47e01ad6e ("bpf: add support for bpf_call to interpreter")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210112075520.4103414-2-andrii@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

memory: mtk-smi: Fix PM usage counter unbalance in mtk_smi ops

[ Upstream commit a2d522ff0f5cc26915c4ccee9457fd4b4e1edc48 ]

pm_runtime_get_sync will increment pm usage counter
even it failed. Forgetting to putting operation will
result in reference leak here. We fix it by replacing
it with pm_runtime_resume_and_get to keep usage counter
balanced.

Fixes: 4f0a1a1ae3519 ("memory: mtk-smi: Invoke pm runtime_callback to enable clocks")
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Link: https://lore.kernel.org/r/20201123102118.3866195-1-zhangqilong3@huawei.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: exynos: correct PMIC interrupt trigger level on Espresso

[ Upstream commit 1fea2eb2f5bbd3fbbe2513d2386b5f6e6db17fd7 ]

The Samsung PMIC datasheets describe the interrupt line as active low
with a requirement of acknowledge from the CPU.  Without specifying the
interrupt type in Devicetree, kernel might apply some fixed
configuration, not necessarily working for this hardware.

Fixes: 9589f7721e16 ("arm64: dts: Add S2MPS15 PMIC node on exynos7-espresso")
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20201210212903.216728-8-krzk@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: exynos: correct PMIC interrupt trigger level on TM2

[ Upstream commit e98e2367dfb4b6d7a80c8ce795c644124eff5f36 ]

The Samsung PMIC datasheets describe the interrupt line as active low
with a requirement of acknowledge from the CPU.  Without specifying the
interrupt type in Devicetree, kernel might apply some fixed
configuration, not necessarily working for this hardware.

Fixes: 01e5d2352152 ("arm64: dts: exynos: Add dts file for Exynos5433-based TM2 board")
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20201210212903.216728-7-krzk@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: exynos: correct PMIC interrupt trigger level on Odroid XU3 family

[ Upstream commit 3e7d9a583a24f7582c6bc29a0d4d624feedbc2f9 ]

The Samsung PMIC datasheets describe the interrupt line as active low
with a requirement of acknowledge from the CPU.  The falling edge
interrupt will mostly work but it's not correct.

Fixes: aac4e0615341 ("ARM: dts: odroidxu3: Enable wake alarm of S2MPS11 RTC")
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20201210212903.216728-6-krzk@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: exynos: correct PMIC interrupt trigger level on Arndale Octa

[ Upstream commit 1ac8893c4fa3d4a34915dc5cdab568a39db5086c ]

The Samsung PMIC datasheets describe the interrupt line as active low
with a requirement of acknowledge from the CPU.  The falling edge
interrupt will mostly work but it's not correct.

Fixes: 1fed2252713e ("ARM: dts: fix pinctrl for s2mps11-irq on exynos5420-arndale-octa")
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20201210212903.216728-5-krzk@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: exynos: correct PMIC interrupt trigger level on Spring

[ Upstream commit 77e6a5467cb8657cf8b5e610a30a4c502085e4f9 ]

The Samsung PMIC datasheets describe the interrupt line as active low
with a requirement of acknowledge from the CPU.  Without specifying the
interrupt type in Devicetree, kernel might apply some fixed
configuration, not necessarily working for this hardware.

Fixes: 53dd4138bb0a ("ARM: dts: Add exynos5250-spring device tree")
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20201210212903.216728-4-krzk@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: exynos: correct PMIC interrupt trigger level on Rinato

[ Upstream commit 437ae60947716bb479e2f32466f49445c0509b1e ]

The Samsung PMIC datasheets describe the interrupt line as active low
with a requirement of acknowledge from the CPU.  Without specifying the
interrupt type in Devicetree, kernel might apply some fixed
configuration, not necessarily working for this hardware.

Fixes: faaf348ef468 ("ARM: dts: Add board dts file for exynos3250-rinato")
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20201210212903.216728-3-krzk@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: exynos: correct PMIC interrupt trigger level on Monk

[ Upstream commit 8528cda2b7c667e9cd173aef1a677c71b7d5a096 ]

The Samsung PMIC datasheets describe the interrupt line as active low
with a requirement of acknowledge from the CPU.  Without specifying the
interrupt type in Devicetree, kernel might apply some fixed
configuration, not necessarily working for this hardware.

Fixes: e0cefb3f79d3 ("ARM: dts: add board dts file for Exynos3250-based Monk board")
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20201210212903.216728-2-krzk@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: exynos: correct PMIC interrupt trigger level on Artik 5

[ Upstream commit cb31334687db31c691901269d65074a7ffaecb18 ]

The Samsung PMIC datasheets describe the interrupt line as active low
with a requirement of acknowledge from the CPU.  Without specifying the
interrupt type in Devicetree, kernel might apply some fixed
configuration, not necessarily working for this hardware.

Fixes: b004a34bd0ff ("ARM: dts: exynos: Add exynos3250-artik5 dtsi file for ARTIK5 module")
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20201210212903.216728-1-krzk@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

Bluetooth: Fix initializing response id after clearing struct

[ Upstream commit a5687c644015a097304a2e47476c0ecab2065734 ]

Looks like this was missed when patching the source to clear the structures
throughout, causing this one instance to clear the struct after the response
id is assigned.

Fixes: eddb7732119d ("Bluetooth: A2MP: Fix not initializing all members")
Signed-off-by: Christopher William Snowhill <chris@kode54.net>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Bluetooth: hci_uart: Fix a race for write_work scheduling

[ Upstream commit afe0b1c86458f121b085271e4f3034017a90d4a3 ]

In hci_uart_write_work, there is a loop/goto checking the value of
HCI_UART_TX_WAKEUP. If HCI_UART_TX_WAKEUP is set again, it keeps trying
hci_uart_dequeue; otherwise, it clears HCI_UART_SENDING and returns.

In hci_uart_tx_wakeup, if HCI_UART_SENDING is already set, it sets
HCI_UART_TX_WAKEUP, skips schedule_work and assumes the running/pending
hci_uart_write_work worker will do hci_uart_dequeue properly.

However, if the HCI_UART_SENDING check in hci_uart_tx_wakeup is done after
the loop breaks, but before HCI_UART_SENDING is cleared in
hci_uart_write_work, the schedule_work is skipped incorrectly.

Fix this race by changing the order of HCI_UART_SENDING and
HCI_UART_TX_WAKEUP modification.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Fixes: 82f5169bf3d3 ("Bluetooth: hci_uart: add serdev driver support library")
Signed-off-by: Claire Chang <tientzu@chromium.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Bluetooth: btqcomsmd: Fix a resource leak in error handling paths in the probe function

[ Upstream commit 9a39a927be01d89e53f04304ab99a8761e08910d ]

Some resource should be released in the error handling path of the probe
function, as already done in the remove function.

The remove function was fixed in commit 5052de8deff5 ("soc: qcom: smd:
Transition client drivers from smd to rpmsg")

Fixes: 1511cc750c3d ("Bluetooth: Introduce Qualcomm WCNSS SMD based HCI driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ath10k: Fix error handling in case of CE pipe init failure

[ Upstream commit 31561e8557cd1eeba5806ac9ce820f8323b2201b ]

Currently if the copy engine pipe init fails for snoc based
chipsets, the rri is not freed.

Fix this error handling for copy engine pipe init
failure.

Tested-on: WCN3990 hw1.0 SNOC WLAN.HL.3.1-01040-QCAHLSWMTPLZ-1

Fixes: 4945af5b264f ("ath10k: enable SRRI/DRRI support on ddr for WCN3990")
Signed-off-by: Rakesh Pillai <pillair@codeaurora.org>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1607713210-18320-1-git-send-email-pillair@codeaurora.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

random: fix the RNDRESEEDCRNG ioctl

commit 11a0b5e0ec8c13bef06f7414f9e914506140d5cb upstream.

The RNDRESEEDCRNG ioctl reseeds the primary_crng from itself, which
doesn't make sense.  Reseed it from the input_pool instead.

Fixes: d848e5f8e1eb ("random: add new ioctl RNDRESEEDCRNG")
Cc: stable@vger.kernel.org
Cc: linux-crypto@vger.kernel.org
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Jann Horn <jannh@google.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jann Horn <jannh@google.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20210112192818.69921-1-ebiggers@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

MIPS: vmlinux.lds.S: add missing PAGE_ALIGNED_DATA() section

commit 8ac7c87acdcac156670f9920c8acbd84308ff4b1 upstream.

MIPS uses its own declaration of rwdata, and thus it should be kept
in sync with the asm-generic one. Currently PAGE_ALIGNED_DATA() is
missing from the linker script, which emits the following ld
warnings:

mips-alpine-linux-musl-ld: warning: orphan section
`.data..page_aligned' from `arch/mips/kernel/vdso.o' being placed
in section `.data..page_aligned'
mips-alpine-linux-musl-ld: warning: orphan section
`.data..page_aligned' from `arch/mips/vdso/vdso-image.o' being placed
in section `.data..page_aligned'

Add the necessary declaration, so the mentioned structures will be
placed in vmlinux as intended:

ffffffff80630580 D __end_once
ffffffff80630580 D __start___dyndbg
ffffffff80630580 D __start_once
ffffffff80630580 D __stop___dyndbg
ffffffff80634000 d mips_vdso_data
ffffffff80638000 d vdso_data
ffffffff80638580 D _gp
ffffffff8063c000 T __init_begin
ffffffff8063c000 D _edata
ffffffff8063c000 T _sinittext

->

ffffffff805a4000 D __end_init_task
ffffffff805a4000 D __nosave_begin
ffffffff805a4000 D __nosave_end
ffffffff805a4000 d mips_vdso_data
ffffffff805a8000 d vdso_data
ffffffff805ac000 D mmlist_lock
ffffffff805ac080 D tasklist_lock

Fixes: ebb5e78cc634 ("MIPS: Initial implementation of a VDSO")
Signed-off-by: Alexander Lobakin <alobakin@pm.me>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Cc: stable@vger.kernel.org # 4.4+
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: usb-audio: Fix PCM buffer allocation in non-vmalloc mode

commit fb3c293b82c31a9a68fbcf4e7a45fadd8a47ea2b upstream.

The commit f274baa49be6 ("ALSA: usb-audio: Allow non-vmalloc buffer
for PCM buffers") introduced the mode to allocate coherent pages for
PCM buffers, and it used bus->controller device as its DMA device.
It turned out, however, that bus->sysdev is a more appropriate device
to be used for DMA mapping in HCD code.

This patch corrects the device reference accordingly.

Note that, on most platforms, both point to the very same device,
hence this patch doesn't change anything practically.  But on
platforms like xhcd-plat hcd, the change becomes effective.

Fixes: f274baa49be6 ("ALSA: usb-audio: Allow non-vmalloc buffer for PCM buffers")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210205144559.29555-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bfq: Avoid false bfq queue merging

commit 41e76c85660c022c6bf5713bfb6c21e64a487cec upstream.

bfq_setup_cooperator() uses bfqd->in_serv_last_pos so detect whether it
makes sense to merge current bfq queue with the in-service queue.
However if the in-service queue is freshly scheduled and didn't dispatch
any requests yet, bfqd->in_serv_last_pos is stale and contains value
from the previously scheduled bfq queue which can thus result in a bogus
decision that the two queues should be merged. This bug can be observed
for example with the following fio jobfile:

[global]
direct=0
ioengine=sync
invalidate=1
size=1g
rw=read

[reader]
numjobs=4
directory=/mnt

where the 4 processes will end up in the one shared bfq queue although
they do IO to physically very distant files (for some reason I was able to
observe this only with slice_idle=1ms setting).

Fix the problem by invalidating bfqd->in_serv_last_pos when switching
in-service queue.

Fixes: 058fdecc6de7 ("block, bfq: fix in-service-queue check for queue merging")
CC: stable@vger.kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Acked-by: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

virt: vbox: Do not use wait_event_interruptible when called from kernel context

commit c35901b39ddc20077f4ae7b9f7bf344487f62212 upstream.

Do not use wait_event_interruptible when vbg_hgcm_call() gets called from
kernel-context, such as it being called by the vboxsf filesystem code.

This fixes some filesystem related system calls on shared folders
unexpectedly failing with -EINTR.

Fixes: 0532a1b0d045 ("virt: vbox: Implement passing requestor info to the host for VirtualBox 6.0.x")
Reported-by: Ludovic Pouzenc <bugreports@pouzenc.fr>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210121150754.147598-1-hdegoede@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI: Decline to resize resources if boot config must be preserved

commit 729e3a669d1b62e9876a671ac03ccba399a23b68 upstream.

The _DSM #5 method in the ACPI host bridge object tells us whether the OS
must preserve the resource assignments done by firmware. If this is the
case, we should not permit drivers to resize BARs on the fly. Make
pci_resize_resource() take this into account.

Link: https://lore.kernel.org/r/20210109095353.13417-1-ardb@kernel.org
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org # v5.4+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI: qcom: Use PHY_REFCLK_USE_PAD only for ipq8064

commit 2cfef1971aea6119ee27429181d6cb3383031ac2 upstream.

The use of PHY_REFCLK_USE_PAD introduced a regression for apq8064 devices.
It was tested that while apq doesn't require the padding, ipq SoC must use
it or the kernel hangs on boot.

Link: https://lore.kernel.org/r/20201019165555.8269-1-ansuelsmth@gmail.com
Fixes: de3c4bf64897 ("PCI: qcom: Add support for tx term offset for rev 2.1.0")
Reported-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>
Cc: stable@vger.kernel.org # v4.19+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kdb: Make memory allocations more robust

commit 93f7a6d818deef69d0ba652d46bae6fbabbf365c upstream.

Currently kdb uses in_interrupt() to determine whether its library
code has been called from the kgdb trap handler or from a saner calling
context such as driver init. This approach is broken because
in_interrupt() alone isn't able to determine kgdb trap handler entry from
normal task context. This can happen during normal use of basic features
such as breakpoints and can also be trivially reproduced using:
echo g > /proc/sysrq-trigger

We can improve this by adding check for in_dbg_master() instead which
explicitly determines if we are running in debugger context.

Cc: stable@vger.kernel.org
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Link: https://lore.kernel.org/r/1611313556-4004-1-git-send-email-sumit.garg@linaro.org
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

debugfs: do not attempt to create a new file before the filesystem is initalized

commit 56348560d495d2501e87db559a61de717cd3ab02 upstream.

Some subsystems want to add debugfs files at early boot, way before
debugfs is initialized.  This seems to work somehow as the vfs layer
will not allow it to happen, but let's be explicit and test to ensure we
are properly up and running before allowing files to be created.

Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: stable <stable@vger.kernel.org>
Reported-by: Michael Walle <michael@walle.cc>
Reported-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210218100818.3622317-2-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

debugfs: be more robust at handling improper input in debugfs_lookup()

commit bc6de804d36b3709d54fa22bd128cbac91c11526 upstream.

debugfs_lookup() doesn't like it if it is passed an illegal name
pointer, or if the filesystem isn't even initialized yet.  If either of
these happen, it will crash the system, so fix it up by properly testing
for valid input and that we are up and running before trying to find a
file in the filesystem.

Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: stable <stable@vger.kernel.org>
Reported-by: Michael Walle <michael@walle.cc>
Tested-by: Michael Walle <michael@walle.cc>
Tested-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210218100818.3622317-1-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kvm: x86: replace kvm_spec_ctrl_test_value with runtime test on the host

commit 841c2be09fe4f495fe5224952a419bd8c7e5b455 upstream.

To avoid complex and in some cases incorrect logic in
kvm_spec_ctrl_test_value, just try the guest's given value on the host
processor instead, and if it doesn't #GP, allow the guest to set it.

One such case is when host CPU supports STIBP mitigation
but doesn't support IBRS (as is the case with some Zen2 AMD cpus),
and in this case we were giving guest #GP when it tried to use STIBP

The reason why can can do the host test is that IA32_SPEC_CTRL msr is
passed to the guest, after the guest sets it to a non zero value
for the first time (due to performance reasons),
and as as result of this, it is pointless to emulate #GP condition on
this first access, in a different way than what the host CPU does.

This is based on a patch from Sean Christopherson, who suggested this idea.

Fixes: 6441fa6178f5 ("KVM: x86: avoid incorrect writes to host MSR_IA32_SPEC_CTRL")
Cc: stable@vger.kernel.org
Suggested-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20200708115731.180097-1-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

vmlinux.lds.h: add DWARF v5 sections

commit 3c4fa46b30c551b1df2fb1574a684f68bc22067c upstream.

We expect toolchains to produce these new debug info sections as part of
DWARF v5. Add explicit placements to prevent the linker warnings from
--orphan-section=warn.

Compilers may produce such sections with explicit -gdwarf-5, or based on
the implicit default version of DWARF when -g is used via DEBUG_INFO.
This implicit default changes over time, and has changed to DWARF v5
with GCC 11.

.debug_sup was mentioned in review, but without compilers producing it
today, let's wait to add it until it becomes necessary.

Cc: stable@vger.kernel.org
Link: https://bugzilla.redhat.com/show_bug.cgi?id=1922707
Reported-by: Chris Murphy <lists@colorremedies.com>
Suggested-by: Fangrui Song <maskray@google.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Mark Wielaard <mark@klomp.org>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 5.4.101

Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Tested-by: Jason Self <jason@bluehome.net>
Tested-by: Ross Schmidt <ross.schm.dev@gmail.com>
Link: https://lore.kernel.org/r/20210225092515.001992375@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scripts/recordmcount.pl: support big endian for ARCH sh

[ Upstream commit 93ca696376dd3d44b9e5eae835ffbc84772023ec ]

The kernel test robot reported the following issue:

    CC [M]  drivers/soc/litex/litex_soc_ctrl.o
  sh4-linux-objcopy: Unable to change endianness of input file(s)
  sh4-linux-ld: cannot find drivers/soc/litex/.tmp_gl_litex_soc_ctrl.o: No such file or directory
  sh4-linux-objcopy: 'drivers/soc/litex/.tmp_mx_litex_soc_ctrl.o': No such file

The problem is that the format of input file is elf32-shbig-linux, but
sh4-linux-objcopy wants to output a file which format is elf32-sh-linux:

  $ sh4-linux-objdump -d drivers/soc/litex/litex_soc_ctrl.o | grep format
  drivers/soc/litex/litex_soc_ctrl.o:     file format elf32-shbig-linux

Link: https://lkml.kernel.org/r/20210210150435.2171567-1-rong.a.chen@intel.com
Link: https://lore.kernel.org/linux-mm/202101261118.GbbYSlHu-lkp@intel.com
Signed-off-by: Rong Chen <rong.a.chen@intel.com>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Yoshinori Sato <ysato@users.osdn.me>
Cc: Rich Felker <dalias@libc.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cifs: Set CIFS_MOUNT_USE_PREFIX_PATH flag on setting cifs_sb->prepath.

[ Upstream commit a738c93fb1c17e386a09304b517b1c6b2a6a5a8b ]

While debugging another issue today, Steve and I noticed that if a
subdir for a file share is already mounted on the client, any new
mount of any other subdir (or the file share root) of the same share
results in sharing the cifs superblock, which e.g. can result in
incorrect device name.

While setting prefix path for the root of a cifs_sb,
CIFS_MOUNT_USE_PREFIX_PATH flag should also be set.
Without it, prepath is not even considered in some places,
and output of "mount" and various /proc/<>/*mount* related
options can be missing part of the device name.

Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cxgb4: Add new T6 PCI device id 0x6092

[ Upstream commit 3401e4aa43a540881cc97190afead650e709c418 ]

Signed-off-by: Raju Rangoju <rajur@chelsio.com>
Link: https://lore.kernel.org/r/20210202182511.8109-1-rajur@chelsio.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

NET: usb: qmi_wwan: Adding support for Cinterion MV31

[ Upstream commit a4dc7eee9106a9d2a6e08b442db19677aa9699c7 ]

Adding support for Cinterion MV31 with PID 0x00B7.

T:  Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 11 Spd=5000 MxCh= 0
D:  Ver= 3.20 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs=  1
P:  Vendor=1e2d ProdID=00b7 Rev=04.14
S:  Manufacturer=Cinterion
S:  Product=Cinterion USB Mobile Broadband
S:  SerialNumber=b3246eed
C:  #Ifs= 4 Cfg#= 1 Atr=a0 MxPwr=896mA
I:  If#=0x0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
I:  If#=0x1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#=0x3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option

Signed-off-by: Christoph Schemmel <christoph.schemmel@gmail.com>
Link: https://lore.kernel.org/r/20210202084523.4371-1-christoph.schemmel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

KVM: Use kvm_pfn_t for local PFN variable in hva_to_pfn_remapped()

commit a9545779ee9e9e103648f6f2552e73cfe808d0f4 upstream.

Use kvm_pfn_t, a.k.a. u64, for the local 'pfn' variable when retrieving
a so called "remapped" hva/pfn pair.  In theory, the hva could resolve to
a pfn in high memory on a 32-bit kernel.

This bug was inadvertantly exposed by commit bd2fae8da794 ("KVM: do not
assume PTE is writable after follow_pfn"), which added an error PFN value
to the mix, causing gcc to comlain about overflowing the unsigned long.

  arch/x86/kvm/../../../virt/kvm/kvm_main.c: In function ‘hva_to_pfn_remapped’:
  include/linux/kvm_host.h:89:30: error: conversion from ‘long long unsigned int’
                                  to ‘long unsigned int’ changes value from
                                  ‘9218868437227405314’ to ‘2’ [-Werror=overflow]
   89 | #define KVM_PFN_ERR_RO_FAULT (KVM_PFN_ERR_MASK + 2)
      |                              ^
virt/kvm/kvm_main.c:1935:9: note: in expansion of macro ‘KVM_PFN_ERR_RO_FAULT’

Cc: stable@vger.kernel.org
Fixes: add6a0cd1c5b ("KVM: MMU: try to fix up page faults before giving up")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210208201940.1258328-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm: provide a saner PTE walking API for modules

commit 9fd6dad1261a541b3f5fa7dc5b152222306e6702 upstream.

Currently, the follow_pfn function is exported for modules but
follow_pte is not.  However, follow_pfn is very easy to misuse,
because it does not provide protections (so most of its callers
assume the page is writable!) and because it returns after having
already unlocked the page table lock.

Provide instead a simplified version of follow_pte that does
not have the pmdpp and range arguments.  The older version
survives as follow_invalidate_pte() for use by fs/dax.c.

Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: do not assume PTE is writable after follow_pfn

commit bd2fae8da794b55bf2ac02632da3a151b10e664c upstream.

In order to convert an HVA to a PFN, KVM usually tries to use
the get_user_pages family of functinso.  This however is not
possible for VM_IO vmas; in that case, KVM instead uses follow_pfn.

In doing this however KVM loses the information on whether the
PFN is writable.  That is usually not a problem because the main
use of VM_IO vmas with KVM is for BARs in PCI device assignment,
however it is a bug.  To fix it, use follow_pte and check pte_write
while under the protection of the PTE lock.  The information can
be used to fail hva_to_pfn_remapped or passed back to the
caller via *writable.

Usage of follow_pfn was introduced in commit add6a0cd1c5b ("KVM: MMU: try to fix
up page faults before giving up", 2016-07-05); however, even older version
have the same issue, all the way back to commit 2e2e3738af33 ("KVM:
Handle vma regions with no backing page", 2008-07-20), as they also did
not check whether the PFN was writable.

Fixes: 2e2e3738af33 ("KVM: Handle vma regions with no backing page")
Reported-by: David Stevens <stevensd@google.com>
Cc: 3pvd@google.com
Cc: Jann Horn <jannh@google.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm: simplify follow_pte{,pmd}

commit ff5c19ed4b087073cea38ff0edc80c23d7256943 upstream.

Merge __follow_pte_pmd, follow_pte_pmd and follow_pte into a single
follow_pte function and just pass two additional NULL arguments for the
two previous follow_pte callers.

[sfr@canb.auug.org.au: merge fix for "s390/pci: remove races against pte updates"]
Link: https://lkml.kernel.org/r/20201111221254.7f6a3658@canb.auug.org.au
Link: https://lkml.kernel.org/r/20201029101432.47011-3-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm: unexport follow_pte_pmd

commit 7336375734d65ecc82956b59a79cf5deccce880c upstream.

Patch series "simplify follow_pte a bit".

This small series drops the not needed follow_pte_pmd exports, and
simplifies the follow_pte family of functions a bit.

This patch (of 2):

follow_pte_pmd() is only used by the DAX code, which can't be modular.

Link: https://lkml.kernel.org/r/20201029101432.47011-2-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scripts: set proper OpenSSL include dir also for sign-file

commit fe968c41ac4f4ec9ffe3c4cf16b72285f5e9674f upstream.

Fixes: 2cea4a7a1885 ("scripts: use pkg-config to locate libcrypto")
Signed-off-by: Rolf Eike Beer <eb@emlix.com>
Cc: stable@vger.kernel.org # 5.6.x
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scripts: use pkg-config to locate libcrypto

commit 2cea4a7a1885bd0c765089afc14f7ff0eb77864e upstream.

Otherwise build fails if the headers are not in the default location. While at
it also ask pkg-config for the libs, with fallback to the existing value.

Signed-off-by: Rolf Eike Beer <eb@emlix.com>
Cc: stable@vger.kernel.org # 5.6.x
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: tegra: Add power-domain for Tegra210 HDA

commit 1e0ca5467445bc1f41a9e403d6161a22f313dae7 upstream.

HDA initialization is failing occasionally on Tegra210 and following
print is observed in the boot log. Because of this probe() fails and
no sound card is registered.

  [16.800802] tegra-hda 70030000.hda: no codecs found!

Codecs request a state change and enumeration by the controller. In
failure cases this does not seem to happen as STATETS register reads 0.

The problem seems to be related to the HDA codec dependency on SOR
power domain. If it is gated during HDA probe then the failure is
observed. Building Tegra HDA driver into kernel image avoids this
failure but does not completely address the dependency part. Fix this
problem by adding 'power-domains' DT property for Tegra210 HDA. Note
that Tegra186 and Tegra194 HDA do this already.

Fixes: 742af7e7a0a1 ("arm64: tegra: Add Tegra210 support")
Depends-on: 96d1f078ff0 ("arm64: tegra: Add SOR power-domain for Tegra210")
Cc: <stable@vger.kernel.org>
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ntfs: check for valid standard information attribute

commit 4dfe6bd94959222e18d512bdf15f6bf9edb9c27c upstream.

Mounting a corrupted filesystem with NTFS resulted in a kernel crash.

We should check for valid STANDARD_INFORMATION attribute offset and length
before trying to access it

Link: https://lkml.kernel.org/r/20210217155930.1506815-1-rkovhaev@gmail.com
Link: https://syzkaller.appspot.com/bug?extid=c584225dabdea2f71969
Signed-off-by: Rustam Kovhaev <rkovhaev@gmail.com>
Reported-by: syzbot+c584225dabdea2f71969@syzkaller.appspotmail.com
Tested-by: syzbot+c584225dabdea2f71969@syzkaller.appspotmail.com
Acked-by: Anton Altaparmakov <anton@tuxera.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: quirks: add quirk to start video capture on ELMO L-12F document camera reliable

commit 1ebe718bb48278105816ba03a0408ecc2d6cf47f upstream.

Without this quirk starting a video capture from the device often fails with

kernel: uvcvideo: Failed to set UVC probe control : -110 (exp. 34).

Signed-off-by: Stefan Ursella <stefan.ursella@wolfvision.net>
Link: https://lore.kernel.org/r/20210210140713.18711-1-stefan.ursella@wolfvision.net
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: quirks: sort quirk entries

commit 43861d29c0810a70792bf69d37482efb7bb6677d upstream.

Move the last entry to its proper place to maintain the VID/PID sort
order.

Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20210210111746.13360-1-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

HID: make arrays usage and value to be the same

commit ed9be64eefe26d7d8b0b5b9fa3ffdf425d87a01f upstream.

The HID subsystem allows an "HID report field" to have a different
number of "values" and "usages" when it is allocated. When a field
struct is created, the size of the usage array is guaranteed to be at
least as large as the values array, but it may be larger. This leads to
a potential out-of-bounds write in
__hidinput_change_resolution_multipliers() and an out-of-bounds read in
hidinput_count_leds().

To fix this, let's make sure that both the usage and value arrays are
the same size.

Cc: stable@vger.kernel.org
Signed-off-by: Will McVicker <willmcvicker@google.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bpf: Fix truncation handling for mod32 dst reg wrt zero

commit 9b00f1b78809309163dda2d044d9e94a3c0248a3 upstream.

Recently noticed that when mod32 with a known src reg of 0 is performed,
then the dst register is 32-bit truncated in verifier:

  0: R1=ctx(id=0,off=0,imm=0) R10=fp0
  0: (b7) r0 = 0
  1: R0_w=inv0 R1=ctx(id=0,off=0,imm=0) R10=fp0
  1: (b7) r1 = -1
  2: R0_w=inv0 R1_w=inv-1 R10=fp0
  2: (b4) w2 = -1
  3: R0_w=inv0 R1_w=inv-1 R2_w=inv4294967295 R10=fp0
  3: (9c) w1 %= w0
  4: R0_w=inv0 R1_w=inv(id=0,umax_value=4294967295,var_off=(0x0; 0xffffffff)) R2_w=inv4294967295 R10=fp0
  4: (b7) r0 = 1
  5: R0_w=inv1 R1_w=inv(id=0,umax_value=4294967295,var_off=(0x0; 0xffffffff)) R2_w=inv4294967295 R10=fp0
  5: (1d) if r1 == r2 goto pc+1
   R0_w=inv1 R1_w=inv(id=0,umax_value=4294967295,var_off=(0x0; 0xffffffff)) R2_w=inv4294967295 R10=fp0
  6: R0_w=inv1 R1_w=inv(id=0,umax_value=4294967295,var_off=(0x0; 0xffffffff)) R2_w=inv4294967295 R10=fp0
  6: (b7) r0 = 2
  7: R0_w=inv2 R1_w=inv(id=0,umax_value=4294967295,var_off=(0x0; 0xffffffff)) R2_w=inv4294967295 R10=fp0
  7: (95) exit
  7: R0=inv1 R1=inv(id=0,umin_value=4294967295,umax_value=4294967295,var_off=(0x0; 0xffffffff)) R2=inv4294967295 R10=fp0
  7: (95) exit

However, as a runtime result, we get 2 instead of 1, meaning the dst
register does not contain (u32)-1 in this case. The reason is fairly
straight forward given the 0 test leaves the dst register as-is:

  # ./bpftool p d x i 23
   0: (b7) r0 = 0
   1: (b7) r1 = -1
   2: (b4) w2 = -1
   3: (16) if w0 == 0x0 goto pc+1
   4: (9c) w1 %= w0
   5: (b7) r0 = 1
   6: (1d) if r1 == r2 goto pc+1
   7: (b7) r0 = 2
   8: (95) exit

This was originally not an issue given the dst register was marked as
completely unknown (aka 64 bit unknown). However, after 468f6eafa6c4
("bpf: fix 32-bit ALU op verification") the verifier casts the register
output to 32 bit, and hence it becomes 32 bit unknown. Note that for
the case where the src register is unknown, the dst register is marked
64 bit unknown. After the fix, the register is truncated by the runtime
and the test passes:

  # ./bpftool p d x i 23
   0: (b7) r0 = 0
   1: (b7) r1 = -1
   2: (b4) w2 = -1
   3: (16) if w0 == 0x0 goto pc+2
   4: (9c) w1 %= w0
   5: (05) goto pc+1
   6: (bc) w1 = w1
   7: (b7) r0 = 1
   8: (1d) if r1 == r2 goto pc+1
   9: (b7) r0 = 2
  10: (95) exit

Semantics also match with {R,W}x mod{64,32} 0 -> {R,W}x. Invalid div
has always been {R,W}x div{64,32} 0 -> 0. Rewrites are as follows:

  mod32:                            mod64:

  (16) if w0 == 0x0 goto pc+2       (15) if r0 == 0x0 goto pc+1
  (9c) w1 %= w0                     (9f) r1 %= r0
  (05) goto pc+1
  (bc) w1 = w1

Fixes: 468f6eafa6c4 ("bpf: fix 32-bit ALU op verification")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 5.4.100

Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Igor Matheus Andrade Torrente <igormtorrente@gmail.com>
Tested-by: Jason Self <jason@bluehome.net>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Link: https://lore.kernel.org/r/20210222121013.583922436@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: fix backport of 2175bf57dc952 in 5.4.95

There's a mistake in backport of upstream commit 2175bf57dc95 ("btrfs:
fix possible free space tree corruption with online conversion") as
5.4.95 commit e1ae9aab8029.

The enum value BTRFS_FS_FREE_SPACE_TREE_UNTRUSTED has been added to the
wrong enum set, colliding with value of BTRFS_FS_QUOTA_ENABLE. This
could cause problems during the tree conversion, where the quotas
wouldn't be set up properly but the related code executed anyway due to
the bit set.

Link: https://lore.kernel.org/linux-btrfs/20210219111741.95DD.409509F4@e16-tech.com
Reported-by: Wang Yugui <wangyugui@e16-tech.com>
CC: stable@vger.kernel.org # 5.4.95+
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: pwc: Use correct device for DMA

commit 69c9e825e812ec6d663e64ebf14bd3bc7f37e2c7 upstream.

This fixes the following newly introduced warning:

[   15.518253] ------------[ cut here ]------------
[   15.518941] WARNING: CPU: 0 PID: 246 at kernel/dma/mapping.c:149 dma_map_page_attrs+0x1a8/0x1d0
[   15.520634] Modules linked in: pwc videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 videobuf2_common videodev mc efivarfs
[   15.522335] CPU: 0 PID: 246 Comm: v4l2-test Not tainted 5.11.0-rc1+ #1
[   15.523281] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
[   15.524438] RIP: 0010:dma_map_page_attrs+0x1a8/0x1d0
[   15.525135] Code: 10 5b 5d 41 5c 41 5d c3 4d 89 d0 eb d7 4d 89 c8 89 e9 48 89 da e8 68 29 00 00 eb d1 48 89 f2 48 2b 50 18 48 89 d0 eb 83 0f 0b <0f> 0b 48 c7 c0 ff ff ff ff eb b8 48 89 d9 48 8b 40 40 e8 61 69 d2
[   15.527938] RSP: 0018:ffffa2694047bca8 EFLAGS: 00010246
[   15.528716] RAX: 0000000000000000 RBX: 0000000000002580 RCX: 0000000000000000
[   15.529782] RDX: 0000000000000000 RSI: ffffcdce000ecc00 RDI: ffffa0b4bdb888a0
[   15.530849] RBP: 0000000000000002 R08: 0000000000000002 R09: 0000000000000000
[   15.531881] R10: 0000000000000004 R11: 000000000002d8c0 R12: 0000000000000000
[   15.532911] R13: ffffa0b4bdb88800 R14: ffffa0b483820000 R15: ffffa0b4bdb888a0
[   15.533942] FS:  00007fc5fbb5e4c0(0000) GS:ffffa0b4fc000000(0000) knlGS:0000000000000000
[   15.535141] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   15.535988] CR2: 00007fc5fb6ea138 CR3: 0000000003812000 CR4: 00000000001506f0
[   15.537025] Call Trace:
[   15.537425]  start_streaming+0x2e9/0x4b0 [pwc]
[   15.538143]  vb2_start_streaming+0x5e/0x110 [videobuf2_common]
[   15.538989]  vb2_core_streamon+0x107/0x140 [videobuf2_common]
[   15.539831]  __video_do_ioctl+0x18f/0x4a0 [videodev]
[   15.540670]  video_usercopy+0x13a/0x5b0 [videodev]
[   15.541349]  ? video_put_user+0x230/0x230 [videodev]
[   15.542096]  ? selinux_file_ioctl+0x143/0x200
[   15.542752]  v4l2_ioctl+0x40/0x50 [videodev]
[   15.543360]  __x64_sys_ioctl+0x89/0xc0
[   15.543930]  do_syscall_64+0x33/0x40
[   15.544448]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[   15.545236] RIP: 0033:0x7fc5fb671587
[   15.545780] Code: b3 66 90 48 8b 05 11 49 2c 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d e1 48 2c 00 f7 d8 64 89 01 48
[   15.548486] RSP: 002b:00007fff0f71f038 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
[   15.549578] RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007fc5fb671587
[   15.550664] RDX: 00007fff0f71f060 RSI: 0000000040045612 RDI: 0000000000000003
[   15.551706] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000
[   15.552738] R10: 0000000000000000 R11: 0000000000000246 R12: 00007fff0f71f060
[   15.553817] R13: 00007fff0f71f1d0 R14: 0000000000de1270 R15: 0000000000000000
[   15.554914] ---[ end trace 7be03122966c2486 ]---

Fixes: 1161db6776bd ("media: usb: pwc: Don't use coherent DMA buffers for ISO transfer")
Signed-off-by: Matwey V. Kornilov <matwey@sai.msu.ru>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xen-blkback: fix error handling in xen_blkbk_map()

commit 871997bc9e423f05c7da7c9178e62dde5df2a7f8 upstream.

The function uses a goto-based loop, which may lead to an earlier error
getting discarded by a later iteration. Exit this ad-hoc loop when an
error was encountered.

The out-of-memory error path additionally fails to fill a structure
field looked at by xen_blkbk_unmap_prepare() before inspecting the
handle which does get properly set (to BLKBACK_INVALID_HANDLE).

Since the earlier exiting from the ad-hoc loop requires the same field
filling (invalidation) as that on the out-of-memory path, fold both
paths. While doing so, drop the pr_alert(), as extra log messages aren't
going to help the situation (the kernel will log oom conditions already
anyway).

This is XSA-365.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Julien Grall <julien@xen.org>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xen-scsiback: don't "handle" error by BUG()

commit 7c77474b2d22176d2bfb592ec74e0f2cb71352c9 upstream.

In particular -ENOMEM may come back here, from set_foreign_p2m_mapping().
Don't make problems worse, the more that handling elsewhere (together
with map's status fields now indicating whether a mapping wasn't even
attempted, and hence has to be considered failed) doesn't require this
odd way of dealing with errors.

This is part of XSA-362.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
Cc: stable@vger.kernel.org
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xen-netback: don't "handle" error by BUG()

commit 3194a1746e8aabe86075fd3c5e7cf1f4632d7f16 upstream.

In particular -ENOMEM may come back here, from set_foreign_p2m_mapping().
Don't make problems worse, the more that handling elsewhere (together
with map's status fields now indicating whether a mapping wasn't even
attempted, and hence has to be considered failed) doesn't require this
odd way of dealing with errors.

This is part of XSA-362.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
Cc: stable@vger.kernel.org
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xen-blkback: don't "handle" error by BUG()

commit 5a264285ed1cd32e26d9de4f3c8c6855e467fd63 upstream.

In particular -ENOMEM may come back here, from set_foreign_p2m_mapping().
Don't make problems worse, the more that handling elsewhere (together
with map's status fields now indicating whether a mapping wasn't even
attempted, and hence has to be considered failed) doesn't require this
odd way of dealing with errors.

This is part of XSA-362.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
Cc: stable@vger.kernel.org
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xen/arm: don't ignore return errors from set_phys_to_machine

commit 36bf1dfb8b266e089afa9b7b984217f17027bf35 upstream.

set_phys_to_machine can fail due to lack of memory, see the kzalloc call
in arch/arm/xen/p2m.c:__set_phys_to_machine_multi.

Don't ignore the potential return error in set_foreign_p2m_mapping,
returning it to the caller instead.

This is part of XSA-361.

Signed-off-by: Stefano Stabellini <stefano.stabellini@xilinx.com>
Cc: stable@vger.kernel.org
Reviewed-by: Julien Grall <jgrall@amazon.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Xen/gntdev: correct error checking in gntdev_map_grant_pages()

commit ebee0eab08594b2bd5db716288a4f1ae5936e9bc upstream.

Failure of the kernel part of the mapping operation should also be
indicated as an error to the caller, or else it may assume the
respective kernel VA is okay to access.

Furthermore gnttab_map_refs() failing still requires recording
successfully mapped handles, so they can be unmapped subsequently. This
in turn requires there to be a way to tell full hypercall failure from
partial success - preset map_op status fields such that they won't
"happen" to look as if the operation succeeded.

Also again use GNTST_okay instead of implying its value (zero).

This is part of XSA-361.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
Cc: stable@vger.kernel.org
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Xen/gntdev: correct dev_bus_addr handling in gntdev_map_grant_pages()

commit dbe5283605b3bc12ca45def09cc721a0a5c853a2 upstream.

We may not skip setting the field in the unmap structure when
GNTMAP_device_map is in use - such an unmap would fail to release the
respective resources (a page ref in the hypervisor). Otoh the field
doesn't need setting at all when GNTMAP_device_map is not in use.

To record the value for unmapping, we also better don't use our local
p2m: In particular after a subsequent change it may not have got updated
for all the batch elements. Instead it can simply be taken from the
respective map's results.

We can additionally avoid playing this game altogether for the kernel
part of the mappings in (x86) PV mode.

This is part of XSA-361.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
Cc: stable@vger.kernel.org
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Xen/x86: also check kernel mapping in set_foreign_p2m_mapping()

commit b512e1b077e5ccdbd6e225b15d934ab12453b70a upstream.

We should not set up further state if either mapping failed; paying
attention to just the user mapping's status isn't enough.

Also use GNTST_okay instead of implying its value (zero).

This is part of XSA-361.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
Cc: stable@vger.kernel.org
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Xen/x86: don't bail early from clear_foreign_p2m_mapping()

commit a35f2ef3b7376bfd0a57f7844bd7454389aae1fc upstream.

Its sibling (set_foreign_p2m_mapping()) as well as the sibling of its
only caller (gnttab_map_refs()) don't clean up after themselves in case
of error. Higher level callers are expected to do so. However, in order
for that to really clean up any partially set up state, the operation
should not terminate upon encountering an entry in unexpected state. It
is particularly relevant to notice here that set_foreign_p2m_mapping()
would skip setting up a p2m entry if its grant mapping failed, but it
would continue to set up further p2m entries as long as their mappings
succeeded.

Arguably down the road set_foreign_p2m_mapping() may want its page state
related WARN_ON() also converted to an error return.

This is part of XSA-361.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
Cc: stable@vger.kernel.org
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: bridge: Fix a warning when del bridge sysfs

[ Upstream commit 989a1db06eb18ff605377eec87e18d795e0ec74b ]

I got a warining report:

br_sysfs_addbr: can't create group bridge4/bridge
------------[ cut here ]------------
sysfs group 'bridge' not found for kobject 'bridge4'
WARNING: CPU: 2 PID: 9004 at fs/sysfs/group.c:279 sysfs_remove_group fs/sysfs/group.c:279 [inline]
WARNING: CPU: 2 PID: 9004 at fs/sysfs/group.c:279 sysfs_remove_group+0x153/0x1b0 fs/sysfs/group.c:270
Modules linked in: iptable_nat
...
Call Trace:
  br_dev_delete+0x112/0x190 net/bridge/br_if.c:384
  br_dev_newlink net/bridge/br_netlink.c:1381 [inline]
  br_dev_newlink+0xdb/0x100 net/bridge/br_netlink.c:1362
  __rtnl_newlink+0xe11/0x13f0 net/core/rtnetlink.c:3441
  rtnl_newlink+0x64/0xa0 net/core/rtnetlink.c:3500
  rtnetlink_rcv_msg+0x385/0x980 net/core/rtnetlink.c:5562
  netlink_rcv_skb+0x134/0x3d0 net/netlink/af_netlink.c:2494
  netlink_unicast_kernel net/netlink/af_netlink.c:1304 [inline]
  netlink_unicast+0x4a0/0x6a0 net/netlink/af_netlink.c:1330
  netlink_sendmsg+0x793/0xc80 net/netlink/af_netlink.c:1919
  sock_sendmsg_nosec net/socket.c:651 [inline]
  sock_sendmsg+0x139/0x170 net/socket.c:671
  ____sys_sendmsg+0x658/0x7d0 net/socket.c:2353
  ___sys_sendmsg+0xf8/0x170 net/socket.c:2407
  __sys_sendmsg+0xd3/0x190 net/socket.c:2440
  do_syscall_64+0x33/0x40 arch/x86/entry/common.c:46
  entry_SYSCALL_64_after_hwframe+0x44/0xa9

In br_device_event(), if the bridge sysfs fails to be added,
br_device_event() should return error. This can prevent warining
when removing bridge sysfs that do not exist.

Fixes: bb900b27a2f4 ("bridge: allow creating bridge devices with netlink")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Tested-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Link: https://lore.kernel.org/r/20201211122921.40386-1-wanghai38@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: qrtr: Fix port ID for control messages

[ Upstream commit ae068f561baa003d260475c3e441ca454b186726 ]

The port ID for control messages was uncorrectly set with broadcast
node ID value, causing message to be dropped on remote side since
not passing packet filtering (cb->dst_port != QRTR_PORT_CTRL).

Fixes: d27e77a3de28 ("net: qrtr: Reset the node and port ID of broadcast messages")
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

KVM: SEV: fix double locking due to incorrect backport

Fix an incorrect line in the 5.4.y and 4.19.y backports of commit
19a23da53932bc ("Fix unsynchronized access to sev members through
svm_register_enc_region"), first applied to 5.4.98 and 4.19.176.

Fixes: 1e80fdc09d12 ("KVM: SVM: Pin guest memory when SEV is active")
Reported-by: Dov Murik <dovmurik@linux.vnet.ibm.com>
Cc: stable@vger.kernel.org # 5.4.x
Cc: stable@vger.kernel.org # 4.19.x
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Linux 5.4.99

Tested-by: Jason Self <jason@bluehome.net>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Tested-by: Ross Schmidt <ross.schm.dev@gmail.com>
Link: https://lore.kernel.org/r/20210215152715.401453874@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>