ALSA: rawmidi: Fix possible deadlock with virmidi registration

commit 816f318b2364262a51024096da7ca3b84e78e3b5 upstream.

When a seq-virmidi driver is initialized, it registers a rawmidi
instance with its callback to create an associated seq kernel client.
Currently it's done throughly in rawmidi's register_mutex context.
Recently it was found that this may lead to a deadlock another rawmidi
device that is being attached with the sequencer is accessed, as both
open with the same register_mutex.  This was actually triggered by
syzkaller, as Dmitry Vyukov reported:

======================================================
 [ INFO: possible circular locking dependency detected ]
 4.8.0-rc1+ #11 Not tainted
 -------------------------------------------------------
 syz-executor/7154 is trying to acquire lock:
  (register_mutex#5){+.+.+.}, at: [<ffffffff84fd6d4b>] snd_rawmidi_kernel_open+0x4b/0x260 sound/core/rawmidi.c:341

 but task is already holding lock:
  (&grp->list_mutex){++++.+}, at: [<ffffffff850138bb>] check_and_subscribe_port+0x5b/0x5c0 sound/core/seq/seq_ports.c:495

 which lock already depends on the new lock.

 the existing dependency chain (in reverse order) is:

 -> #1 (&grp->list_mutex){++++.+}:
    [<ffffffff8147a3a8>] lock_acquire+0x208/0x430 kernel/locking/lockdep.c:3746
    [<ffffffff863f6199>] down_read+0x49/0xc0 kernel/locking/rwsem.c:22
    [<     inline     >] deliver_to_subscribers sound/core/seq/seq_clientmgr.c:681
    [<ffffffff85005c5e>] snd_seq_deliver_event+0x35e/0x890 sound/core/seq/seq_clientmgr.c:822
    [<ffffffff85006e96>] > snd_seq_kernel_client_dispatch+0x126/0x170 sound/core/seq/seq_clientmgr.c:2418
    [<ffffffff85012c52>] snd_seq_system_broadcast+0xb2/0xf0 sound/core/seq/seq_system.c:101
    [<ffffffff84fff70a>] snd_seq_create_kernel_client+0x24a/0x330 sound/core/seq/seq_clientmgr.c:2297
    [<     inline     >] snd_virmidi_dev_attach_seq sound/core/seq/seq_virmidi.c:383
    [<ffffffff8502d29f>] snd_virmidi_dev_register+0x29f/0x750 sound/core/seq/seq_virmidi.c:450
    [<ffffffff84fd208c>] snd_rawmidi_dev_register+0x30c/0xd40 sound/core/rawmidi.c:1645
    [<ffffffff84f816d3>] __snd_device_register.part.0+0x63/0xc0 sound/core/device.c:164
    [<     inline     >] __snd_device_register sound/core/device.c:162
    [<ffffffff84f8235d>] snd_device_register_all+0xad/0x110 sound/core/device.c:212
    [<ffffffff84f7546f>] snd_card_register+0xef/0x6c0 sound/core/init.c:749
    [<ffffffff85040b7f>] snd_virmidi_probe+0x3ef/0x590 sound/drivers/virmidi.c:123
    [<ffffffff833ebf7b>] platform_drv_probe+0x8b/0x170 drivers/base/platform.c:564
    ......

 -> #0 (register_mutex#5){+.+.+.}:
    [<     inline     >] check_prev_add kernel/locking/lockdep.c:1829
    [<     inline     >] check_prevs_add kernel/locking/lockdep.c:1939
    [<     inline     >] validate_chain kernel/locking/lockdep.c:2266
    [<ffffffff814791f4>] __lock_acquire+0x4d44/0x4d80 kernel/locking/lockdep.c:3335
    [<ffffffff8147a3a8>] lock_acquire+0x208/0x430 kernel/locking/lockdep.c:3746
    [<     inline     >] __mutex_lock_common kernel/locking/mutex.c:521
    [<ffffffff863f0ef1>] mutex_lock_nested+0xb1/0xa20 kernel/locking/mutex.c:621
    [<ffffffff84fd6d4b>] snd_rawmidi_kernel_open+0x4b/0x260 sound/core/rawmidi.c:341
    [<ffffffff8502e7c7>] midisynth_subscribe+0xf7/0x350 sound/core/seq/seq_midi.c:188
    [<     inline     >] subscribe_port sound/core/seq/seq_ports.c:427
    [<ffffffff85013cc7>] check_and_subscribe_port+0x467/0x5c0 sound/core/seq/seq_ports.c:510
    [<ffffffff85015da9>] snd_seq_port_connect+0x2c9/0x500 sound/core/seq/seq_ports.c:579
    [<ffffffff850079b8>] snd_seq_ioctl_subscribe_port+0x1d8/0x2b0 sound/core/seq/seq_clientmgr.c:1480
    [<ffffffff84ffe9e4>] snd_seq_do_ioctl+0x184/0x1e0 sound/core/seq/seq_clientmgr.c:2225
    [<ffffffff84ffeae8>] snd_seq_kernel_client_ctl+0xa8/0x110 sound/core/seq/seq_clientmgr.c:2440
    [<ffffffff85027664>] snd_seq_oss_midi_open+0x3b4/0x610 sound/core/seq/oss/seq_oss_midi.c:375
    [<ffffffff85023d67>] snd_seq_oss_synth_setup_midi+0x107/0x4c0 sound/core/seq/oss/seq_oss_synth.c:281
    [<ffffffff8501b0a8>] snd_seq_oss_open+0x748/0x8d0 sound/core/seq/oss/seq_oss_init.c:274
    [<ffffffff85019d8a>] odev_open+0x6a/0x90 sound/core/seq/oss/seq_oss.c:138
    [<ffffffff84f7040f>] soundcore_open+0x30f/0x640 sound/sound_core.c:639
    ......

 other info that might help us debug this:

 Possible unsafe locking scenario:

        CPU0                    CPU1
        ----                    ----
   lock(&grp->list_mutex);
                                lock(register_mutex#5);
                                lock(&grp->list_mutex);
   lock(register_mutex#5);

 *** DEADLOCK ***
======================================================

The fix is to simply move the registration parts in
snd_rawmidi_dev_register() to the outside of the register_mutex lock.
The lock is needed only to manage the linked list, and it's not
necessarily to cover the whole initialization process.

Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>

x86/apic: Do not init irq remapping if ioapic is disabled

commit 2e63ad4bd5dd583871e6602f9d398b9322d358d9 upstream.

native_smp_prepare_cpus
  -> default_setup_apic_routing
    -> enable_IR_x2apic
      -> irq_remapping_prepare
        -> intel_prepare_irq_remapping
          -> intel_setup_irq_remapping

So IR table is setup even if "noapic" boot parameter is added. As a result we
crash later when the interrupt affinity is set due to a half initialized
remapping infrastructure.

Prevent remap initialization when IOAPIC is disabled.

Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Joerg Roedel <joro@8bytes.org>
Link: http://lkml.kernel.org/r/1471954039-3942-1-git-send-email-wanpeng.li@hotmail.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>

ubifs: Fix assertion in layout_in_gaps()

commit c0082e985fdf77b02fc9e0dac3b58504dcf11b7a upstream.

An assertion in layout_in_gaps() verifies that the gap_lebs pointer is
below the maximum bound. When computing this maximum bound the idx_lebs
count is multiplied by sizeof(int), while C pointers arithmetic does take
into account the size of the pointed elements implicitly already. Remove
the multiplication to fix the assertion.

Fixes: 1e51764a3c2ac05a ("UBIFS: add new flash file system")
Signed-off-by: Vincent Stehlé <vincent.stehle@intel.com>
Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>

timekeeping: Cap array access in timekeeping_debug

commit a4f8f6667f099036c88f231dcad4cf233652c824 upstream.

It was reported that hibernation could fail on the 2nd attempt, where the
system hangs at hibernate() -> syscore_resume() -> i8237A_resume() ->
claim_dma_lock(), because the lock has already been taken.

However there is actually no other process would like to grab this lock on
that problematic platform.

Further investigation showed that the problem is triggered by setting
/sys/power/pm_trace to 1 before the 1st hibernation.

Since once pm_trace is enabled, the rtc becomes unmeaningful after suspend,
and meanwhile some BIOSes would like to adjust the 'invalid' RTC (e.g, smaller
than 1970) to the release date of that motherboard during POST stage, thus
after resumed, it may seem that the system had a significant long sleep time
which is a completely meaningless value.

Then in timekeeping_resume -> tk_debug_account_sleep_time, if the bit31 of the
sleep time happened to be set to 1, fls() returns 32 and we add 1 to
sleep_time_bin[32], which causes an out of bounds array access and therefor
memory being overwritten.

As depicted by System.map:
0xffffffff81c9d080 b sleep_time_bin
0xffffffff81c9d100 B dma_spin_lock
the dma_spin_lock.val is set to 1, which caused this problem.

This patch adds a sanity check in tk_debug_account_sleep_time()
to ensure we don't index past the sleep_time_bin array.

[jstultz: Problem diagnosed and original patch by Chen Yu, I've solved the
 issue slightly differently, but borrowed his excelent explanation of the
 issue here.]

Fixes: 5c83545f24ab "power: Add option to log time spent in suspend"
Reported-by: Janek Kozicki <cosurgi@gmail.com>
Reported-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Cc: linux-pm@vger.kernel.org
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Xunlei Pang <xpang@redhat.com>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Zhang Rui <rui.zhang@intel.com>
Link: http://lkml.kernel.org/r/1471993702-29148-3-git-send-email-john.stultz@linaro.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>

xfs: fix superblock inprogress check

commit f3d7ebdeb2c297bd26272384e955033493ca291c upstream.

From inspection, the superblock sb_inprogress check is done in the
verifier and triggered only for the primary superblock via a
"bp->b_bn == XFS_SB_DADDR" check.

Unfortunately, the primary superblock is an uncached buffer, and
hence it is configured by xfs_buf_read_uncached() with:

bp->b_bn = XFS_BUF_DADDR_NULL;  /* always null for uncached buffers */

And so this check never triggers. Fix it.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>

drm/msm: fix use of copy_from_user() while holding spinlock

commit 89f82cbb0d5c0ab768c8d02914188aa2211cd2e3 upstream.

Use instead __copy_from_user_inatomic() and fallback to slow-path where
we drop and re-aquire the lock in case of fault.

Reported-by: Vaishali Thakkar <vaishali.thakkar@oracle.com>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>

drm: Reject page_flip for !DRIVER_MODESET

commit 6f00975c619064a18c23fd3aced325ae165a73b9 upstream.

Somehow this one slipped through, which means drivers without modeset
support can be oopsed (since those also don't call
drm_mode_config_init, which means the crtc lookup will chase an
uninitalized idr).

Reported-by: Alexander Potapenko <glider@google.com>
Cc: Alexander Potapenko <glider@google.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>

drm/radeon: fix radeon_move_blit on 32bit systems

commit 13f479b9df4e2bbf2d16e7e1b02f3f55f70e2455 upstream.

This bug seems to be present for a very long time.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>

ipv6: release dst in ping_v6_sendmsg

[ Upstream commit 03c2778a938aaba0893f6d6cdc29511d91a79848 ]

Neither the failure or success paths of ping_v6_sendmsg release
the dst it acquires.  This leads to a flood of warnings from
"net/core/dst.c:288 dst_release" on older kernels that
don't have 8bf4ada2e21378816b28205427ee6b0e1ca4c5f1 backported.

That patch optimistically hoped this had been fixed post 3.10, but
it seems at least one case wasn't, where I've seen this triggered
a lot from machines doing unprivileged icmp sockets.

Cc: Martin Lau <kafai@fb.com>
Signed-off-by: Dave Jones <davej@codemonkey.org.uk>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>

net: ratelimit warnings about dst entry refcount underflow or overflow

commit 8bf4ada2e21378816b28205427ee6b0e1ca4c5f1 upstream.

Kernel generates a lot of warnings when dst entry reference counter
overflows and becomes negative. That bug was seen several times at
machines with outdated 3.10.y kernels. Most like it's already fixed
in upstream. Anyway that flood completely kills machine and makes
further debugging impossible.

Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>

bonding: Fix bonding crash

[ Upstream commit 24b27fc4cdf9e10c5e79e5923b6b7c2c5c95096c ]

Following few steps will crash kernel -

  (a) Create bonding master
      > modprobe bonding miimon=50
  (b) Create macvlan bridge on eth2
      > ip link add link eth2 dev mvl0 address aa:0:0:0:0:01 \
   type macvlan
  (c) Now try adding eth2 into the bond
      > echo +eth2 > /sys/class/net/bond0/bonding/slaves
      <crash>

Bonding does lots of things before checking if the device enslaved is
busy or not.

In this case when the notifier call-chain sends notifications, the
bond_netdev_event() assumes that the rx_handler /rx_handler_data is
registered while the bond_enslave() hasn't progressed far enough to
register rx_handler for the new slave.

This patch adds a rx_handler check that can be performed right at the
beginning of the enslave code to avoid getting into this situation.

Signed-off-by: Mahesh Bandewar <maheshb@google.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>

tun: fix transmit timestamp support

[ Upstream commit 7b996243fab46092fb3a29c773c54be8152366e4 ]

Instead of using sock_tx_timestamp, use skb_tx_timestamp to record
software transmit timestamp of a packet.

sock_tx_timestamp resets and overrides the tx_flags of the skb.
The function is intended to be called from within the protocol
layer when creating the skb, not from a device driver. This is
inconsistent with other drivers and will cause issues for TCP.

In TCP, we intend to sample the timestamps for the last byte
for each sendmsg/sendpage. For that reason, tcp_sendmsg calls
tcp_tx_timestamp only with the last skb that it generates.
For example, if a 128KB message is split into two 64KB packets
we want to sample the SND timestamp of the last packet. The current
code in the tun driver, however, will result in sampling the SND
timestamp for both packets.

Also, when the last packet is split into smaller packets for
retranmission (see tcp_fragment), the tun driver will record
timestamps for all of the retransmitted packets and not only the
last packet.

Fixes: eda297729171 (tun: Support software transmit time stamping.)
Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: Francis Yan <francisyyan@google.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>

tcp: properly scale window in tcp_v[46]_reqsk_send_ack()

[ Upstream commit 20a2b49fc538540819a0c552877086548cff8d8d ]

When sending an ack in SYN_RECV state, we must scale the offered
window if wscale option was negotiated and accepted.

Tested:
 Following packetdrill test demonstrates the issue :

0.000 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3
+0 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0

+0 bind(3, ..., ...) = 0
+0 listen(3, 1) = 0

// Establish a connection.
+0 < S 0:0(0) win 20000 <mss 1000,sackOK,wscale 7, nop, TS val 100 ecr 0>
+0 > S. 0:0(0) ack 1 win 28960 <mss 1460,sackOK, TS val 100 ecr 100, nop, wscale 7>

+0 < . 1:11(10) ack 1 win 156 <nop,nop,TS val 99 ecr 100>
// check that window is properly scaled !
+0 > . 1:1(0) ack 1 win 226 <nop,nop,TS val 200 ecr 100>

Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Yuchung Cheng <ycheng@google.com>
Cc: Neal Cardwell <ncardwell@google.com>
Acked-by: Yuchung Cheng <ycheng@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>

net/mlx5: Added missing check of msg length in verifying its signature

[ Upstream commit 2c0f8ce1b584a4d7b8ff53140d21dfed99834940 ]

Set and verify signature calculates the signature for each of the
mailbox nodes, even for those that are unused (from cache). Added
a missing length check to set and verify only those which are used.

While here, also moved the setting of msg's nodes token to where we
already go over them. This saves a pass because checksum is disabled,
and the only useful thing remaining that set signature does is setting
the token.

Fixes: e126ba97dba9 ('mlx5: Add driver for Mellanox Connect-IB
adapters')
Signed-off-by: Paul Blakey <paulb@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>

tcp: fix use after free in tcp_xmit_retransmit_queue()

[ Upstream commit bb1fceca22492109be12640d49f5ea5a544c6bb4 ]

When tcp_sendmsg() allocates a fresh and empty skb, it puts it at the
tail of the write queue using tcp_add_write_queue_tail()

Then it attempts to copy user data into this fresh skb.

If the copy fails, we undo the work and remove the fresh skb.

Unfortunately, this undo lacks the change done to tp->highest_sack and
we can leave a dangling pointer (to a freed skb)

Later, tcp_xmit_retransmit_queue() can dereference this pointer and
access freed memory. For regular kernels where memory is not unmapped,
this might cause SACK bugs because tcp_highest_sack_seq() is buggy,
returning garbage instead of tp->snd_nxt, but with various debug
features like CONFIG_DEBUG_PAGEALLOC, this can crash the kernel.

This bug was found by Marco Grassi thanks to syzkaller.

Fixes: 6859d49475d4 ("[TCP]: Abstract tp->highest_sack accessing & point to next skb")
Reported-by: Marco Grassi <marco.gra@gmail.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Cc: Yuchung Cheng <ycheng@google.com>
Cc: Neal Cardwell <ncardwell@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>

net/irda: handle iriap_register_lsap() allocation failure

[ Upstream commit 5ba092efc7ddff040777ae7162f1d195f513571b ]

If iriap_register_lsap() fails to allocate memory, self->lsap is
set to NULL. However, none of the callers handle the failure and
irlmp_connect_request() will happily dereference it:

    iriap_register_lsap: Unable to allocated LSAP!
    ================================================================================
    UBSAN: Undefined behaviour in net/irda/irlmp.c:378:2
    member access within null pointer of type 'struct lsap_cb'
    CPU: 1 PID: 15403 Comm: trinity-c0 Not tainted 4.8.0-rc1+ #81
    Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.3-0-ge2fc41e-prebuilt.qemu-project.org
    04/01/2014
     0000000000000000 ffff88010c7e78a8 ffffffff82344f40 0000000041b58ab3
     ffffffff84f98000 ffffffff82344e94 ffff88010c7e78d0 ffff88010c7e7880
     ffff88010630ad00 ffffffff84a5fae0 ffffffff84d3f5c0 000000000000017a
    Call Trace:
     [<ffffffff82344f40>] dump_stack+0xac/0xfc
     [<ffffffff8242f5a8>] ubsan_epilogue+0xd/0x8a
     [<ffffffff824302bf>] __ubsan_handle_type_mismatch+0x157/0x411
     [<ffffffff83b7bdbc>] irlmp_connect_request+0x7ac/0x970
     [<ffffffff83b77cc0>] iriap_connect_request+0xa0/0x160
     [<ffffffff83b77f48>] state_s_disconnect+0x88/0xd0
     [<ffffffff83b78904>] iriap_do_client_event+0x94/0x120
     [<ffffffff83b77710>] iriap_getvaluebyclass_request+0x3e0/0x6d0
     [<ffffffff83ba6ebb>] irda_find_lsap_sel+0x1eb/0x630
     [<ffffffff83ba90c8>] irda_connect+0x828/0x12d0
     [<ffffffff833c0dfb>] SYSC_connect+0x22b/0x340
     [<ffffffff833c7e09>] SyS_connect+0x9/0x10
     [<ffffffff81007bd3>] do_syscall_64+0x1b3/0x4b0
     [<ffffffff845f946a>] entry_SYSCALL64_slow_path+0x25/0x25
    ================================================================================

The bug seems to have been around since forever.

There's more problems with missing error checks in iriap_init() (and
indeed all of irda_init()), but that's a bigger problem that needs
very careful review and testing. This patch will fix the most serious
bug (as it's easily reached from unprivileged userspace).

I have tested my patch with a reproducer.

Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>

Revert "wext: Fix 32 bit iwpriv compatibility issue with 64 bit Kernel"

commit 4d0bd46a4d55383f7b925e6cf7865a77e0f0e020 upstream.

This reverts commit 3d5fdff46c4b2b9534fa2f9fc78e90a48e0ff724.

Ben Hutchings pointed out that the commit isn't safe since it assumes
that the structure used by the driver is iw_point, when in fact there's
no way to know about that.

Fortunately, the only driver in the tree that ever runs this code path
is the wilc1000 staging driver, so it doesn't really matter.

Clearly I should have investigated this better before applying, sorry.

Reported-by: Ben Hutchings <ben@decadent.org.uk>
Fixes: 3d5fdff46c4b ("wext: Fix 32 bit iwpriv compatibility issue with 64 bit Kernel")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>

ext4: use __GFP_NOFAIL in ext4_free_blocks()

commit adb7ef600cc9d9d15ecc934cc26af5c1379777df upstream.

This might be unexpected but pages allocated for sbi->s_buddy_cache are
charged to current memory cgroup. So, GFP_NOFS allocation could fail if
current task has been killed by OOM or if current memory cgroup has no
free memory left. Block allocator cannot handle such failures here yet.

Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>

timers: Use proper base migration in add_timer_on()

commit 22b886dd1018093920c4250dee2a9a3cb7cff7b8 upstream.

Regardless of the previous CPU a timer was on, add_timer_on()
currently simply sets timer->flags to the new CPU.  As the caller must
be seeing the timer as idle, this is locally fine, but the timer
leaving the old base while unlocked can lead to race conditions as
follows.

Let's say timer was on cpu 0.

  cpu 0 cpu 1
  -----------------------------------------------------------------------------
  del_timer(timer) succeeds
del_timer(timer)
  lock_timer_base(timer) locks cpu_0_base
  add_timer_on(timer, 1)
    spin_lock(&cpu_1_base->lock)
    timer->flags set to cpu_1_base
    operates on @timer   operates on @timer

This triggered with mod_delayed_work_on() which contains
"if (del_timer()) add_timer_on()" sequence eventually leading to the
following oops.

  BUG: unable to handle kernel NULL pointer dereference at           (null)
  IP: [<ffffffff810ca6e9>] detach_if_pending+0x69/0x1a0
  ...
  Workqueue: wqthrash wqthrash_workfunc [wqthrash]
  task: ffff8800172ca680 ti: ffff8800172d0000 task.ti: ffff8800172d0000
  RIP: 0010:[<ffffffff810ca6e9>]  [<ffffffff810ca6e9>] detach_if_pending+0x69/0x1a0
  ...
  Call Trace:
   [<ffffffff810cb0b4>] del_timer+0x44/0x60
   [<ffffffff8106e836>] try_to_grab_pending+0xb6/0x160
   [<ffffffff8106e913>] mod_delayed_work_on+0x33/0x80
   [<ffffffffa0000081>] wqthrash_workfunc+0x61/0x90 [wqthrash]
   [<ffffffff8106dba8>] process_one_work+0x1e8/0x650
   [<ffffffff8106e05e>] worker_thread+0x4e/0x450
   [<ffffffff810746af>] kthread+0xef/0x110
   [<ffffffff8185980f>] ret_from_fork+0x3f/0x70

Fix it by updating add_timer_on() to perform proper migration as
__mod_timer() does.

Mike: apply tglx backport

Reported-and-tested-by: Jeff Layton <jlayton@poochiereds.net>
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Chris Worley <chris.worley@primarydata.com>
Cc: bfields@fieldses.org
Cc: Michael Skralivetsky <michael.skralivetsky@primarydata.com>
Cc: Trond Myklebust <trond.myklebust@primarydata.com>
Cc: Shaohua Li <shli@fb.com>
Cc: Jeff Layton <jlayton@poochiereds.net>
Cc: kernel-team@fb.com
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/20151029103113.2f893924@tlielax.poochiereds.net
Link: http://lkml.kernel.org/r/20151104171533.GI5749@mtj.duckdns.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Mike Galbraith <mgalbraith@suse.de>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>

ext4: avoid modifying checksum fields directly during checksum verification

commit b47820edd1634dc1208f9212b7ecfb4230610a23 upstream.

We temporally change checksum fields in buffers of some types of
metadata into '0' for verifying the checksum values. By doing this
without locking the buffer, some metadata's checksums, which are
being committed or written back to the storage, could be damaged.
In our test, several metadata blocks were found with damaged metadata
checksum value during recovery process. When we only verify the
checksum value, we have to avoid modifying checksum fields directly.

Signed-off-by: Daeho Jeong <daeho.jeong@samsung.com>
Signed-off-by: Youngjin Gil <youngjin.gil@samsung.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>

fix d_walk()/non-delayed __d_free() race

I checked Jari's explanation below and found that v3.14.77 and v3.12.62
are missing the same fix as 3.10. In fact Al's original commit 3d56c25
("fix d_walk()/non-delayed __d_free() race") used to mention to check
this __d_materialise_dentry() function in the Cc: stable line, but this
got lost during the backports.

Normally all of our 3 kernels need to apply the following patch that
Ben correctly put in 3.16 and 3.2. I'm fixing the backport in 3.10.103
right now.

On Mon, Aug 22, 2016 at 04:56:57PM +0300, Jari Ruusu wrote:
> This patch for 3.10 branch appears to be missing one important
>
> +       dentry->d_flags |= DCACHE_RCUACCESS;
>
> in fs/dcache.c __d_materialise_dentry() function. When Ben Hutchings
> backported Al Viro's original fix to stable branches that he maintains,
> he added that one additional line to both 3.2 and 3.16 branches. Please
> consider including that additional one line fix for 3.10 stable branch
> also.
>
>
> Ben Hutchings said this on his 3.2.82-rc1 patch:
> [bwh: Backported to 3.2:
>  - Adjust context
>  - Also set the flag in __d_materialise_dentry())]
>
> http://marc.info/?l=linux-kernel&m=147117565612275&w=2
>
>
> Ben Hutchings said this on his 3.16.37-rc1 patch:
> [bwh: Backported to 3.16:
>  - Adjust context
>  - Also set the flag in __d_materialise_dentry())]
>
> http://marc.info/?l=linux-kernel&m=147117433412006&w=2
>
>
> Also mentioned by Sasha Levin on 3.18 and 4.1 commits:
> Cc: stable@vger.kernel.org # v3.2+ (and watch out for __d_materialise_dentry())
>
> http://marc.info/?l=linux-stable-commits&m=146648034410827&w=2
> http://marc.info/?l=linux-stable-commits&m=146647471009771&w=2

Signed-off-by: Jiri Slaby <jslaby@suse.cz>

s390/sclp_ctl: fix potential information leak with /dev/sclp

commit 532c34b5fbf1687df63b3fcd5b2846312ac943c6 upstream.

The sclp_ctl_ioctl_sccb function uses two copy_from_user calls to
retrieve the sclp request from user space. The first copy_from_user
fetches the length of the request which is stored in the first two
bytes of the request. The second copy_from_user gets the complete
sclp request, but this copies the length field a second time.
A malicious user may have changed the length in the meantime.

Reported-by: Pengfei Wang <wpengfeinudt@gmail.com>
Reviewed-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Juerg Haefliger <juerg.haefliger@hpe.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>

ext4: validate that metadata blocks do not overlap superblock

commit 829fa70dddadf9dd041d62b82cd7cea63943899d upstream.

A number of fuzzing failures seem to be caused by allocation bitmaps
or other metadata blocks being pointed at the superblock.

This can cause kernel BUG or WARNings once the superblock is
overwritten, so validate the group descriptor blocks to make sure this
doesn't happen.

Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>

stb6100: fix buffer length check in stb6100_write_reg_range()

commit 7e6bd12fb77b0067df13fb3ba3fadbdff2945396 upstream.

We are checking sizeof() the wrong variable!

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Cc: Willy Tarreau <w@1wt.eu>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>

ALSA: oxygen: Fix logical-not-parentheses warning

commit 8ec7cfce3762299ae289c384e281b2f4010ae231 upstream.

This fixes the following warning, that is seen with gcc 5.1:
warning: logical not is only applied to the left hand side of comparison [-Wlogical-not-parentheses].

Signed-off-by: Tomer Barletz <barletz@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Cc: Willy Tarreau <w@1wt.eu>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>

HID: hid-input: Add parentheses to quell gcc warning

commit 09a5c34e8d6b05663ec4c3d22b1fbd9fec89aaf9 upstream.

GCC reports a -Wlogical-not-parentheses warning here; therefore
add parentheses to shut it up and to express our intent more.

Signed-off-by: James C Boyd <jcboyd.dev@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Cc: Willy Tarreau <w@1wt.eu>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>

be2iscsi: Fix bogus WARN_ON length check

commit dd29dae00d39186890a5eaa2fe4ad8768bfd41a9 upstream.

drivers/scsi/be2iscsi/be_main.c: In function 'be_sgl_create_contiguous':
drivers/scsi/be2iscsi/be_main.c:3187:18: warning: logical not is only applied to the left hand side of comparison [-Wlogical-not-parentheses]
  WARN_ON(!length > 0);

gcc version 5.2.1

Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
Cc: Jayamohan Kallickal <jayamohan.kallickal@avagotech.com>
Cc: Minh Tran <minh.tran@avagotech.com>
Cc: John Soni Jose <sony.john-n@avagotech.com>
Cc: "James E.J. Bottomley" <JBottomley@odin.com>
Reported-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Manoj Kumar <manoj@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Willy Tarreau <w@1wt.eu>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>

Revert "can: fix handling of unmodifiable configuration options fix"

This reverts commit ded1c127d6dc1a1827f3ff657a4cb7edd646092e which was
bce271f255dae8335dc4d2ee2c4531e09cc67f5a upstream.

It was applied incorrectly, and isn't needed for 3.12-stable.

Reported-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

ACPI / sysfs: fix error code in get_status()

commit f18ebc211e259d4f591e39e74b2aa2de226c9a1d upstream.

The problem with ornamental, do-nothing gotos is that they lead to
"forgot to set the error code" bugs.  We should be returning -EINVAL
here but we don't.  It leads to an uninitalized variable in
counter_show():

    drivers/acpi/sysfs.c:603 counter_show()
    error: uninitialized symbol 'status'.

Fixes: 1c8fce27e275 (ACPI: introduce drivers/acpi/sysfs.c)
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>

staging: comedi: daqboard2000: bug fix board type matching code

commit 80e162ee9b31d77d851b10f8c5299132be1e120f upstream.

`daqboard2000_find_boardinfo()` is supposed to check if the
DaqBoard/2000 series model is supported, based on the PCI subvendor and
subdevice ID.  The current code is wrong as it is comparing the PCI
device's subdevice ID to an expected, fixed value for the subvendor ID.
It should be comparing the PCI device's subvendor ID to this fixed
value.  Correct it.

Fixes: 7e8401b23e7f ("staging: comedi: daqboard2000: add back subsystem_device check")
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>

USB: serial: mos7840: fix non-atomic allocation in write path

commit 3b7c7e52efda0d4640060de747768360ba70a7c0 upstream.

There is an allocation with GFP_KERNEL flag in mos7840_write(),
while it may be called from interrupt context.

Follow-up for commit 191252837626 ("USB: kobil_sct: fix non-atomic
allocation in write path")

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>

USB: serial: mos7720: fix non-atomic allocation in write path

commit 5a5a1d614287a647b36dff3f40c2b0ceabbc83ec upstream.

There is an allocation with GFP_KERNEL flag in mos7720_write(),
while it may be called from interrupt context.

Follow-up for commit 191252837626 ("USB: kobil_sct: fix non-atomic
allocation in write path")

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>

USB: fix typo in wMaxPacketSize validation

commit 6c73358c83ce870c0cf32413e5cadb3b9a39c606 upstream.

The maximum value allowed for wMaxPacketSize of a high-speed interrupt
endpoint is 1024 bytes, not 1023.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Fixes: aed9d65ac327 ("USB: validate wMaxPacketValue entries in endpoint descriptors")
Signed-off-by: Jiri Slaby <jslaby@suse.cz>

crypto: nx - off by one bug in nx_of_update_msc()

commit e514cc0a492a3f39ef71b31590a7ef67537ee04b upstream.

The props->ap[] array is defined like this:

struct alg_props ap[NX_MAX_FC][NX_MAX_MODE][3];

So we can see that if msc->fc and msc->mode are == to NX_MAX_FC or
NX_MAX_MODE then we're off by one.

Fixes: ae0222b7289d ('powerpc/crypto: nx driver code supporting nx encryption')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>

Input: i8042 - set up shared ps2_cmd_mutex for AUX ports

commit 47af45d684b5f3ae000ad448db02ce4f13f73273 upstream.

The commit 4097461897df ("Input: i8042 - break load dependency ...")
correctly set up ps2_cmd_mutex pointer for the KBD port but forgot to do
the same for AUX port(s), which results in communication on KBD and AUX
ports to clash with each other.

Fixes: 4097461897df ("Input: i8042 - break load dependency ...")
Reported-by: Bruno Wolff III <bruno@wolff.to>
Tested-by: Bruno Wolff III <bruno@wolff.to>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>

Input: i8042 - break load dependency between atkbd/psmouse and i8042

commit 4097461897df91041382ff6fcd2bfa7ee6b2448c upstream.

As explained in 1407814240-4275-1-git-send-email-decui@microsoft.com we
have a hard load dependency between i8042 and atkbd which prevents
keyboard from working on Gen2 Hyper-V VMs.

> hyperv_keyboard invokes serio_interrupt(), which needs a valid serio
> driver like atkbd.c.  atkbd.c depends on libps2.c because it invokes
> ps2_command().  libps2.c depends on i8042.c because it invokes
> i8042_check_port_owner().  As a result, hyperv_keyboard actually
> depends on i8042.c.
>
> For a Generation 2 Hyper-V VM (meaning no i8042 device emulated), if a
> Linux VM (like Arch Linux) happens to configure CONFIG_SERIO_I8042=m
> rather than =y, atkbd.ko can't load because i8042.ko can't load(due to
> no i8042 device emulated) and finally hyperv_keyboard can't work and
> the user can't input: https://bugs.archlinux.org/task/39820
> (Ubuntu/RHEL/SUSE aren't affected since they use CONFIG_SERIO_I8042=y)

To break the dependency we move away from using i8042_check_port_owner()
and instead allow serio port owner specify a mutex that clients should use
to serialize PS/2 command stream.

Reported-by: Mark Laws <mdl@60hz.org>
Tested-by: Mark Laws <mdl@60hz.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fs/seq_file: fix out-of-bounds read

commit 088bf2ff5d12e2e32ee52a4024fec26e582f44d3 upstream.

seq_read() is a nasty piece of work, not to mention buggy.

It has (I think) an old bug which allows unprivileged userspace to read
beyond the end of m->buf.

I was getting these:

    BUG: KASAN: slab-out-of-bounds in seq_read+0xcd2/0x1480 at addr ffff880116889880
    Read of size 2713 by task trinity-c2/1329
    CPU: 2 PID: 1329 Comm: trinity-c2 Not tainted 4.8.0-rc1+ #96
    Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.3-0-ge2fc41e-prebuilt.qemu-project.org 04/01/2014
    Call Trace:
      kasan_object_err+0x1c/0x80
      kasan_report_error+0x2cb/0x7e0
      kasan_report+0x4e/0x80
      check_memory_region+0x13e/0x1a0
      kasan_check_read+0x11/0x20
      seq_read+0xcd2/0x1480
      proc_reg_read+0x10b/0x260
      do_loop_readv_writev.part.5+0x140/0x2c0
      do_readv_writev+0x589/0x860
      vfs_readv+0x7b/0xd0
      do_readv+0xd8/0x2c0
      SyS_readv+0xb/0x10
      do_syscall_64+0x1b3/0x4b0
      entry_SYSCALL64_slow_path+0x25/0x25
    Object at ffff880116889100, in cache kmalloc-4096 size: 4096
    Allocated:
    PID = 1329
      save_stack_trace+0x26/0x80
      save_stack+0x46/0xd0
      kasan_kmalloc+0xad/0xe0
      __kmalloc+0x1aa/0x4a0
      seq_buf_alloc+0x35/0x40
      seq_read+0x7d8/0x1480
      proc_reg_read+0x10b/0x260
      do_loop_readv_writev.part.5+0x140/0x2c0
      do_readv_writev+0x589/0x860
      vfs_readv+0x7b/0xd0
      do_readv+0xd8/0x2c0
      SyS_readv+0xb/0x10
      do_syscall_64+0x1b3/0x4b0
      return_from_SYSCALL_64+0x0/0x6a
    Freed:
    PID = 0
    (stack is not available)
    Memory state around the buggy address:
     ffff88011688a000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
     ffff88011688a080: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    >ffff88011688a100: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
       ^
     ffff88011688a180: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
     ffff88011688a200: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
    ==================================================================
    Disabling lock debugging due to kernel taint

This seems to be the same thing that Dave Jones was seeing here:

  https://lkml.org/lkml/2016/8/12/334

There are multiple issues here:

  1) If we enter the function with a non-empty buffer, there is an attempt
     to flush it. But it was not clearing m->from after doing so, which
     means that if we try to do this flush twice in a row without any call
     to traverse() in between, we are going to be reading from the wrong
     place -- the splat above, fixed by this patch.

  2) If there's a short write to userspace because of page faults, the
     buffer may already contain multiple lines (i.e. pos has advanced by
     more than 1), but we don't save the progress that was made so the
     next call will output what we've already returned previously. Since
     that is a much less serious issue (and I have a headache after
     staring at seq_read() for the past 8 hours), I'll leave that for now.

Link: http://lkml.kernel.org/r/1471447270-32093-1-git-send-email-vegard.nossum@oracle.com
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Reported-by: Dave Jones <davej@codemonkey.org.uk>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>

gpio: Fix OF build problem on UM

commit 2527ecc9195e9c66252af24c4689e8a67cd4ccb9 upstream.

The UserMode (UM) Linux build was failing in gpiolib-of as it requires
ioremap()/iounmap() to exist, which is absent from UM. The non-existence
of IO memory is negatively defined as CONFIG_NO_IOMEM which means we
need to depend on HAS_IOMEM.

Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>

megaraid_sas: Fix probing cards without io port

commit e7f851684efb3377e9c93aca7fae6e76212e5680 upstream.

Found one megaraid_sas HBA probe fails,

[  187.235190] scsi host2: Avago SAS based MegaRAID driver
[  191.112365] megaraid_sas 0000:89:00.0: BAR 0: can't reserve [io  0x0000-0x00ff]
[  191.120548] megaraid_sas 0000:89:00.0: IO memory region busy!

and the card has resource like,
[  125.097714] pci 0000:89:00.0: [1000:005d] type 00 class 0x010400
[  125.104446] pci 0000:89:00.0: reg 0x10: [io  0x0000-0x00ff]
[  125.110686] pci 0000:89:00.0: reg 0x14: [mem 0xce400000-0xce40ffff 64bit]
[  125.118286] pci 0000:89:00.0: reg 0x1c: [mem 0xce300000-0xce3fffff 64bit]
[  125.125891] pci 0000:89:00.0: reg 0x30: [mem 0xce200000-0xce2fffff pref]

that does not io port resource allocated from BIOS, and kernel can not
assign one as io port shortage.

The driver is only looking for MEM, and should not fail.

It turns out megasas_init_fw() etc are using bar index as mask.  index 1
is used as mask 1, so that pci_request_selected_regions() is trying to
request BAR0 instead of BAR1.

Fix all related reference.

Fixes: b6d5d8808b4c ("megaraid_sas: Use lowest memory bar for SR-IOV VF support")
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Acked-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>

cdc-acm: fix wrong pipe type on rx interrupt xfers

commit add125054b8727103631dce116361668436ef6a7 upstream.

This fixes the "BOGUS urb xfer" warning logged by usb_submit_urb().

Signed-off-by: Gavin Li <git@thegavinli.com>
Acked-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>

aacraid: Check size values after double-fetch from user

commit fa00c437eef8dc2e7b25f8cd868cfa405fcc2bb3 upstream.

In aacraid's ioctl_send_fib() we do two fetches from userspace, one the
get the fib header's size and one for the fib itself. Later we use the
size field from the second fetch to further process the fib. If for some
reason the size from the second fetch is different than from the first
fix, we may encounter an out-of- bounds access in aac_fib_send(). We
also check the sender size to insure it is not out of bounds. This was
reported in https://bugzilla.kernel.org/show_bug.cgi?id=116751 and was
assigned CVE-2016-6480.

Reported-by: Pengfei Wang <wpengfeinudt@gmail.com>
Fixes: 7c00ffa31 '[SCSI] 2.6 aacraid: Variable FIB size (updated patch)'
Signed-off-by: Dave Carroll <david.carroll@microsemi.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>

mac80211: fix purging multicast PS buffer queue

commit 6b07d9ca9b5363dda959b9582a3fc9c0b89ef3b5 upstream.

The code currently assumes that buffered multicast PS frames don't have
a pending ACK frame for tx status reporting.
However, hostapd sends a broadcast deauth frame on teardown for which tx
status is requested. This can lead to the "Have pending ack frames"
warning on module reload.
Fix this by using ieee80211_free_txskb/ieee80211_purge_tx_queue.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>

s390/dasd: fix hanging device after clear subchannel

commit 9ba333dc55cbb9523553df973adb3024d223e905 upstream.

When a device is in a status where CIO has killed all I/O by itself the
interrupt for a clear request may not contain an irb to determine the
clear function. Instead it contains an error pointer -EIO.
This was ignored by the DASD int_handler leading to a hanging device
waiting for a clear interrupt.

Handle -EIO error pointer correctly for requests that are clear pending and
treat the clear as successful.

Signed-off-by: Stefan Haberland <sth@linux.vnet.ibm.com>
Reviewed-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>

EDAC: Increment correct counter in edac_inc_ue_error()

commit 993f88f1cc7f0879047ff353e824e5cc8f10adfc upstream.

Fix typo in edac_inc_ue_error() to increment ue_noinfo_count instead of
ce_noinfo_count.

Signed-off-by: Emmanouil Maroudas <emmanouil.maroudas@gmail.com>
Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Fixes: 4275be635597 ("edac: Change internal representation to work with layers")
Link: http://lkml.kernel.org/r/1461425580-5898-1-git-send-email-emmanouil.maroudas@gmail.com
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>

xhci: Make sure xhci handles USB_SPEED_SUPER_PLUS devices.

commit 0caf6b33452112e5a1186c8c964e90310e49e6bd upstream.

In most cases the devices with the speed set to USB_SPEED_SUPER_PLUS
are handled like regular SuperSpeed devices.

Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>

USB: serial: ftdi_sio: add PIDs for Ivium Technologies devices

commit 6977495c06f7f47636a076ee5a0ca571279d9697 upstream.

Ivium Technologies uses the FTDI VID with custom PIDs for their line of
electrochemical interfaces and the PalmSens they developed for PalmSens
BV.

Signed-off-by: Robert Delien <robert@delien.nl>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>

USB: serial: ftdi_sio: add device ID for WICED USB UART dev board

commit ae34d12cc1e212ffcd92e069030e54dae69c832f upstream.

BCM20706V2_EVAL is a WICED dev board designed with FT2232H USB 2.0
UART/FIFO IC.

To support BCM920706V2_EVAL dev board for WICED development on Linux.
Add the VID(0a5c) and PID(6422) to ftdi_sio driver to allow loading
ftdi_sio for this board.

Signed-off-by: Sheng-Hui J. Chu <s.jeffrey.chu@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>

USB: serial: option: add support for Telit LE920A4

commit 01d7956b58e644ea0d2e8d9340c5727a8fc39d70 upstream.

This patch adds a set of compositions for Telit LE920A4.

Compositions in short are:

0x1207: tty + tty
0x1208: tty + adb + tty + tty
0x1211: tty + adb + ecm
0x1212: tty + adb
0x1213: ecm + tty
0x1214: tty + adb + ecm + tty

telit_le922_blacklist_usbcfg3 is reused for compositions 0x1211
and 0x1214 due to the same interfaces positions.

Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>

USB: serial: option: add D-Link DWM-156/A3

commit cf1b18030de29e4e5b0a57695ae5db4a89da0ff7 upstream.

The device has four interfaces; the three serial ports ought to be
handled by this driver:

00 Diagnostic interface serial port
01 NMEA device serial port
02 Mass storage (sd card)
03 Modem serial port

The other product ids listed in the Windows driver are present already.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>

USB: serial: fix memleak in driver-registration error path

commit 647024a7df36014bbc4479d92d88e6b77c0afcf6 upstream.

udriver struct allocated by kzalloc() will not be freed
if usb_register() and next calls fail. This patch fixes this
by adding one more step with kfree(udriver) in error path.

Signed-off-by: Alexey Klimov <klimov.linux@gmail.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>

usb: xhci: Fix panic if disconnect

commit 88716a93766b8f095cdef37a8e8f2c93aa233b21 upstream.

After a device is disconnected, xhci_stop_device() will be invoked
in xhci_bus_suspend().
Also the "disconnect" IRQ will have ISR to invoke
xhci_free_virt_device() in this sequence.
xhci_irq -> xhci_handle_event -> handle_cmd_completion ->
xhci_handle_cmd_disable_slot -> xhci_free_virt_device

If xhci->devs[slot_id] has been assigned to NULL in
xhci_free_virt_device(), then virt_dev->eps[i].ring in
xhci_stop_device() may point to an invlid address to cause kernel
panic.

virt_dev = xhci->devs[slot_id];
:
if (virt_dev->eps[i].ring && virt_dev->eps[i].ring->dequeue)

[] Unable to handle kernel paging request at virtual address 00001a68
[] pgd=ffffffc001430000
[] [00001a68] *pgd=000000013c807003, *pud=000000013c807003,
*pmd=000000013c808003, *pte=0000000000000000
[] Internal error: Oops: 96000006 [#1] PREEMPT SMP
[] CPU: 0 PID: 39 Comm: kworker/0:1 Tainted: G     U
[] Workqueue: pm pm_runtime_work
[] task: ffffffc0bc0e0bc0 ti: ffffffc0bc0ec000 task.ti:
ffffffc0bc0ec000
[] PC is at xhci_stop_device.constprop.11+0xb4/0x1a4

This issue is found when running with realtek ethernet device
(0bda:8153).

Signed-off-by: Jim Lin <jilin@nvidia.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>

USB: validate wMaxPacketValue entries in endpoint descriptors

commit aed9d65ac3278d4febd8665bd7db59ef53e825fe upstream.

Erroneous or malicious endpoint descriptors may have non-zero bits in
reserved positions, or out-of-bounds values.  This patch helps prevent
these from causing problems by bounds-checking the wMaxPacketValue
entries in endpoint descriptors and capping the values at the maximum
allowed.

This issue was first discovered and tests were conducted by Jake Lamberson
<jake.lamberson1@gmail.com>, an intern working for Rosie Hall.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-by: roswest <roswest@cisco.com>
Tested-by: roswest <roswest@cisco.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>

usb: define USB_SPEED_SUPER_PLUS speed for SuperSpeedPlus USB3.1 devices

commit 8a1b2725a60d3267135c15e80984b4406054f650 upstream.

Add a new USB_SPEED_SUPER_PLUS device speed, and make sure usb core can
handle the new speed.
In most cases the behaviour is the same as with USB_SPEED_SUPER SuperSpeed
devices. In a few places we add a "Plus" string to inform the user of the
new speed.

[js] backport to 3.12: no use_new_scheme yet

Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>

usb: dwc3: gadget: increment request->actual once

commit c7de573471832dff7d31f0c13b0f143d6f017799 upstream.

When using SG lists, we would end up setting
request->actual to:

num_mapped_sgs * (request->length - count)

Let's fix that up by incrementing request->actual
only once.

Reported-by: Brian E Rogers <brian.e.rogers@intel.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>

PCI: Limit config space size for Netronome NFP4000

commit c2e771b02792d222cbcd9617fe71482a64f52647 upstream.

Like the NFP6000, the NFP4000 as an erratum where reading/writing to PCI
config space addresses above 0x600 can cause the NFP to generate PCIe
completion timeouts.

Limit the NFP4000's PF's config space size to 0x600 bytes as is already
done for the NFP6000.

The NFP4000's VF is 0x6004 (PCI_DEVICE_ID_NETRONOME_NFP6000_VF), the same
device ID as the NFP6000's VF.  Thus, its config space is already limited
by the existing use of quirk_nfp6000().

Signed-off-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>

PCI: Add Netronome NFP4000 PF device ID

commit 69874ec233871a62e1bc8c89e643993af93a8630 upstream.

Add the device ID for the PF of the NFP4000.  The device ID for the VF,
0x6003, is already present as PCI_DEVICE_ID_NETRONOME_NFP6000_VF.

Signed-off-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>

PCI: Limit config space size for Netronome NFP6000 family

commit 9f33a2ae59f24452c1076749deb615bccd435ca9 upstream.

The NFP6000 has an erratum where reading/writing to PCI config space
addresses above 0x600 can cause the NFP to generate PCIe completion
timeouts.

Limit the NFP6000's config space size to 0x600 bytes.

Signed-off-by: Jason S. McMullan <jason.mcmullan@netronome.com>
[simon: edited changelog]
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>

PCI: Add Netronome vendor and device IDs

commit a755e169031dac9ebaed03302c4921687c271d62 upstream.

Device IDs for the Netronome NFP3200, NFP3240, NFP6000, and NFP6000 SR-IOV
devices.

Signed-off-by: Jason S. McMullan <jason.mcmullan@netronome.com>
[simon: edited changelog]
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>

PCI: Support PCIe devices with short cfg_size

commit c20aecf6963d1273d8f6d61c042b4845441ca592 upstream.

If a device quirk modifies the pci_dev->cfg_size to be less than
PCI_CFG_SPACE_EXP_SIZE (4096), but greater than PCI_CFG_SPACE_SIZE (256),
the PCI sysfs interface truncates the readable size to PCI_CFG_SPACE_SIZE.

Allow sysfs access to config space up to cfg_size, even if the device
doesn't support the entire 4096-byte PCIe config space.

Note that pci_read_config() and pci_write_config() limit access to
dev->cfg_size even though pcie_config_attr contains 4096 (the maximum
size).

Signed-off-by: Jason S. McMullan <jason.mcmullan@netronome.com>
[simon: edited changelog]
Signed-off-by: Simon Horman <simon.horman@netronome.com>
[bhelgaas: more changelog edits]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>

parisc: Fix order of EREFUSED define in errno.h

commit 3eb53b20d7bd1374598cfb1feaa081fcac0e76cd upstream.

When building gccgo in userspace, errno.h gets parsed and the go include file
sysinfo.go is generated.

Since EREFUSED is defined to the same value as ECONNREFUSED, and ECONNREFUSED
is defined later on in errno.h, this leads to go complaining that EREFUSED
isn't defined yet.

Fix this trivial problem by moving the define of EREFUSED down after
ECONNREFUSED in errno.h (and clean up the indenting while touching this line).

Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>

arm64: Define AT_VECTOR_SIZE_ARCH for ARCH_DLINFO

commit 3146bc64d12377a74dbda12b96ea32da3774ae07 upstream.

AT_VECTOR_SIZE_ARCH should be defined with the maximum number of
NEW_AUX_ENT entries that ARCH_DLINFO can contain, but it wasn't defined
for arm64 at all even though ARCH_DLINFO will contain one NEW_AUX_ENT
for the VDSO address.

This shouldn't be a problem as AT_VECTOR_SIZE_BASE includes space for
AT_BASE_PLATFORM which arm64 doesn't use, but lets define it now and add
the comment above ARCH_DLINFO as found in several other architectures to
remind future modifiers of ARCH_DLINFO to keep AT_VECTOR_SIZE_ARCH up to
date.

Fixes: f668cd1673aa ("arm64: ELF definitions")
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>

x86/mm: Disable preemption during CR3 read+write

commit 5cf0791da5c162ebc14b01eb01631cfa7ed4fa6e upstream.

There's a subtle preemption race on UP kernels:

Usually current->mm (and therefore mm->pgd) stays the same during the
lifetime of a task so it does not matter if a task gets preempted during
the read and write of the CR3.

But then, there is this scenario on x86-UP:

TaskA is in do_exit() and exit_mm() sets current->mm = NULL followed by:

 -> mmput()
 -> exit_mmap()
 -> tlb_finish_mmu()
 -> tlb_flush_mmu()
 -> tlb_flush_mmu_tlbonly()
 -> tlb_flush()
 -> flush_tlb_mm_range()
 -> __flush_tlb_up()
 -> __flush_tlb()
 ->  __native_flush_tlb()

At this point current->mm is NULL but current->active_mm still points to
the "old" mm.

Let's preempt taskA _after_ native_read_cr3() by taskB. TaskB has its
own mm so CR3 has changed.

Now preempt back to taskA. TaskA has no ->mm set so it borrows taskB's
mm and so CR3 remains unchanged. Once taskA gets active it continues
where it was interrupted and that means it writes its old CR3 value
back. Everything is fine because userland won't need its memory
anymore.

Now the fun part:

Let's preempt taskA one more time and get back to taskB. This
time switch_mm() won't do a thing because oldmm (->active_mm)
is the same as mm (as per context_switch()). So we remain
with a bad CR3 / PGD and return to userland.

The next thing that happens is handle_mm_fault() with an address for
the execution of its code in userland. handle_mm_fault() realizes that
it has a PTE with proper rights so it returns doing nothing. But the
CPU looks at the wrong PGD and insists that something is wrong and
faults again. And again. And one more time…

This pagefault circle continues until the scheduler gets tired of it and
puts another task on the CPU. It gets little difficult if the task is a
RT task with a high priority. The system will either freeze or it gets
fixed by the software watchdog thread which usually runs at RT-max prio.
But waiting for the watchdog will increase the latency of the RT task
which is no good.

Fix this by disabling preemption across the critical code section.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Rik van Riel <riel@redhat.com>
Acked-by: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Borislav Petkov <bp@suse.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/1470404259-26290-1-git-send-email-bigeasy@linutronix.de
[ Prettified the changelog. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>

MIPS: KVM: Check for pfn noslot case

commit ba913e4f72fc9cfd03dad968dfb110eb49211d80 upstream.

When mapping a page into the guest we error check using is_error_pfn(),
however this doesn't detect a value of KVM_PFN_NOSLOT, indicating an
error HVA for the page. This can only happen on MIPS right now due to
unusual memslot management (e.g. being moved / removed / resized), or
with an Enhanced Virtual Memory (EVA) configuration where the default
KVM_HVA_ERR_* and kvm_is_error_hva() definitions are unsuitable (fixed
in a later patch). This case will be treated as a pfn of zero, mapping
the first page of physical memory into the guest.

It would appear the MIPS KVM port wasn't updated prior to being merged
(in v3.10) to take commit 81c52c56e2b4 ("KVM: do not treat noslot pfn as
a error pfn") into account (merged v3.8), which converted a bunch of
is_error_pfn() calls to is_error_noslot_pfn(). Switch to using
is_error_noslot_pfn() instead to catch this case properly.

Fixes: 858dd5d45733 ("KVM/MIPS32: MMU/TLB operations for the Guest.")
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Radim Krčmář" <rkrcmar@redhat.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: kvm@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
[james.hogan@imgtec.com: Backport to v3.16.y]
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>

Linux 3.12.63

module: Invalidate signatures on force-loaded modules

commit bca014caaa6130e57f69b5bf527967aa8ee70fdd upstream.

Signing a module should only make it trusted by the specific kernel it
was built for, not anything else.  Loading a signed module meant for a
kernel with a different ABI could have interesting effects.
Therefore, treat all signatures as invalid when a module is
force-loaded.

Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>

dm flakey: error READ bios during the down_interval

commit 99f3c90d0d85708e7401a81ce3314e50bf7f2819 upstream.

When the corrupt_bio_byte feature was introduced it caused READ bios to
no longer be errored with -EIO during the down_interval.  This had to do
with the complexity of needing to submit READs if the corrupt_bio_byte
feature was used.

Fix it so READ bios are properly errored with -EIO; doing so early in
flakey_map() as long as there isn't a match for the corrupt_bio_byte
feature.

Fixes: a3998799fb4df ("dm flakey: add corrupt_bio_byte feature")
Reported-by: Akira Hayakawa <ruby.wktk@gmail.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>

ubi: Fix race condition between ubi device creation and udev

commit 714fb87e8bc05ff78255afc0dca981e8c5242785 upstream.

Install the UBI device object before we arm sysfs.
Otherwise udev tries to read sysfs attributes before UBI is ready and
udev rules will not match.

Signed-off-by: Iosif Harutyunov <iharutyunov@sonicwall.com>
[rw: massaged commit message]
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>

ubi: Make volume resize power cut aware

commit 4946784bd3924b1374f05eebff2fd68660bae866 upstream.

When the volume resize operation shrinks a volume,
LEBs will be unmapped. Since unmapping will not erase these
LEBs immediately we have to wait for that operation to finish.
Otherwise in case of a power cut right after writing the new
volume table the UBI attach process can find more LEBs than the
volume table knows. This will render the UBI image unattachable.

Fix this issue by waiting for erase to complete and write the new
volume table afterward.

Reported-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>

IB/mlx4: Fix the SQ size of an RC QP

commit f2940e2c76bb554a7fbdd28ca5b90904117a9e96 upstream.

When calculating the required size of an RC QP send queue, leave
enough space for masked atomic operations, which require more space than
"regular" atomic operation.

Fixes: 6fa8f719844b ("IB/mlx4: Add support for masked atomic operations")
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Reviewed-by: Jack Morgenstein <jackm@mellanox.co.il>
Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>

IB/IPoIB: Don't update neigh validity for unresolved entries

commit 61c78eea9516a921799c17b4c20558e2aa780fd3 upstream.

ipoib_neigh_get unconditionally updates the "alive" variable member on
any packet send.  This prevents the neighbor garbage collection from
cleaning out a dead neighbor entry if we are still queueing packets
for it.  If the queue for this neighbor is full, then don't update the
alive timestamp.  That way the neighbor can time out even if packets
are still being queued as long as none of them are being sent.

Fixes: b63b70d87741 ("IPoIB: Use a private hash table for path lookup in xmit path")
Signed-off-by: Erez Shitrit <erezsh@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>

IB/mlx5: Fix post send fence logic

commit c9b254955b9f8814966f5dabd34c39d0e0a2b437 upstream.

If the caller specified IB_SEND_FENCE in the send flags of the work
request and no previous work request stated that the successive one
should be fenced, the work request would be executed without a fence.
This could result in RDMA read or atomic operations failure due to a MR
being invalidated. Fix this by adding the mlx5 enumeration for fencing
RDMA/atomic operations and fix the logic to apply this.

Fixes: e126ba97dba9 ('mlx5: Add driver for Mellanox Connect-IB adapters')
Signed-off-by: Eli Cohen <eli@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>

IB/mlx5: Fix returned values of query QP

commit 0540d8148d419bf769e5aa99c77027febd8922f0 upstream.

Some variables were not initialized properly: max_recv_wr,
max_recv_sge, max_send_wr, qp_context and max_inline_data.

Fixes: e126ba97dba9 ('mlx5: Add driver for Mellanox Connect-IB...')
Signed-off-by: Noa Osherovich <noaos@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>

IB/mlx5: Fix MODIFY_QP command input structure

commit e3353c268b06236d6c40fa1714c114f21f44451c upstream.

Make MODIFY_QP command input structure compliant to specification

Fixes: e126ba97dba9 ('mlx5: Add driver for Mellanox Connect-IB adapters')
Signed-off-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>

metag: Fix __cmpxchg_u32 asm constraint for CMP

commit 6154c187b97ee7513046bb4eb317a89f738f13ef upstream.

The LNKGET based atomic sequence in __cmpxchg_u32 has slightly incorrect
constraints for the return value which under certain circumstances can
allow an address unit register to be used as the first operand of a CMP
instruction. This isn't a valid instruction however as the encodings
only allow a data unit to be specified. This would result in an
assembler error like the following:

  Error: failed to assemble instruction: "CMP A0.2,D0Ar6"

Fix by changing the constraint from "=&da" (assigned, early clobbered,
data or address unit register) to "=&d" (data unit register only).

The constraint for the second operand, "bd" (an op2 register where op1
is a data unit register and the instruction supports O2R) is already
correct assuming the first operand is a data unit register.

Other cases of CMP in inline asm have had their constraints checked, and
appear to all be fine.

Fixes: 6006c0d8ce94 ("metag: Atomics, locks and bitops")
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: linux-metag@vger.kernel.org
Signed-off-by: Jiri Slaby <jslaby@suse.cz>

ftrace/recordmcount: Work around for addition of metag magic but not relocations

commit b2e1c26f0b62531636509fbcb6dab65617ed8331 upstream.

glibc recently did a sync up (94e73c95d9b5 "elf.h: Sync with the gabi
webpage") that added a #define for EM_METAG but did not add relocations

This triggers build errors:

scripts/recordmcount.c: In function 'do_file':
scripts/recordmcount.c:466:28: error: 'R_METAG_ADDR32' undeclared (first use in this function)
  case EM_METAG:  reltype = R_METAG_ADDR32;
                            ^~~~~~~~~~~~~~
scripts/recordmcount.c:466:28: note: each undeclared identifier is reported only once for each function it appears in
scripts/recordmcount.c:468:20: error: 'R_METAG_NONE' undeclared (first use in this function)
     rel_type_nop = R_METAG_NONE;
                    ^~~~~~~~~~~~

Work around this change with some more #ifdefery for the relocations.

Fedora Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1354034

Link: http://lkml.kernel.org/r/1468005530-14757-1-git-send-email-labbott@redhat.com
Cc: James Hogan <james.hogan@imgtec.com>
Fixes: 00512bdd4573 ("metag: ftrace support")
Reported-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>

balloon: check the number of available pages in leak balloon

commit 37cf99e08c6fb4dcea0f9ad2b13b6daa8c76a711 upstream.

The balloon has a special mechanism that is subscribed to the oom
notification which leads to deflation for a fixed number of pages.
The number is always fixed even when the balloon is fully deflated.
But leak_balloon did not expect that the pages to deflate will be more
than taken, and raise a "BUG" in balloon_page_dequeue when page list
will be empty.

So, the simplest solution would be to check that the number of releases
pages is less or equal to the number taken pages.

Signed-off-by: Konstantin Neumoin <kneumoin@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>

drm/i915/dp: Revert "drm/i915/dp: fall back to 18 bpp when sink capability is unknown"

commit 196f954e250943df414efd3d632254c29be38e59 upstream.

This reverts commit 013dd9e03872
("drm/i915/dp: fall back to 18 bpp when sink capability is unknown")

This commit introduced a regression into stable kernels,
as it reduces output color depth to 6 bpc for any video
sink connected to a Displayport connector if that sink
doesn't report a specific color depth via EDID, or if
our EDID parser doesn't actually recognize the proper
bpc from EDID.

Affected are active DisplayPort->VGA converters and
active DisplayPort->DVI converters. Both should be
able to handle 8 bpc, but are degraded to 6 bpc with
this patch.

The reverted commit was meant to fix
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=105331

A followup patch implements a fix for that specific bug,
which is caused by a faulty EDID of the affected DP panel
by adding a new EDID quirk for that panel.

DP 18 bpp fallback handling and other improvements to
DP sink bpc detection will be handled for future
kernels in a separate series of patches.

Please backport to stable.

Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>

drm/radeon: support backlight control for UNIPHY3

commit d3200be6c423afa1c34f7e39e9f6d04dd5b0af9d upstream.

Same interface as other UNIPHY blocks

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>

drm/radeon: fix firmware info version checks

commit 3edc38a0facef45ee22af8afdce3737f421f36ab upstream.

Some of the checks didn't handle frev 2 tables properly.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>

drm/radeon: Poll for both connect/disconnect on analog connectors

commit 14ff8d48f2235295dfb3117693008e367b49cdb5 upstream.

DRM_CONNECTOR_POLL_CONNECT only enables polling for connections, not
disconnections. Because of this, we end up losing hotplug polling for
analog connectors once they get connected.

Easy way to reproduce:
 - Grab a machine with a radeon GPU and a VGA port
 - Plug a monitor into the VGA port, wait for it to update the connector
   from disconnected to connected
 - Disconnect the monitor on VGA, a hotplug event is never sent for the
   removal of the connector.

Originally, only using DRM_CONNECTOR_POLL_CONNECT might have been a good
idea since doing VGA polling can sometimes result in having to mess with
the DAC voltages to figure out whether or not there's actually something
there since VGA doesn't have HPD. Doing this would have the potential of
showing visible artifacts on the screen every time we ran a poll while a
VGA display was connected. Luckily, radeon_vga_detect() only resorts to
this sort of polling if the poll is forced, and DRM's polling helper
doesn't force it's polls.

Additionally, this removes some assignments to connector->polled that
weren't actually doing anything.

Signed-off-by: Lyude <cpaul@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>

drm/radeon: add a delay after ATPX dGPU power off

commit d814b24fb74cb9797d70cb8053961447c5879a5c upstream.

ATPX dGPU power control requires a 200ms delay between
power off and on.  This should fix dGPU failures on
resume from power off.

Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>

netlabel: add address family checks to netlbl_{sock,req}_delattr()

commit 0e0e36774081534783aa8eeb9f6fbddf98d3c061 upstream.

It seems risky to always rely on the caller to ensure the socket's
address family is correct before passing it to the NetLabel kAPI,
especially since we see at least one LSM which didn't. Add address
family checks to the *_delattr() functions to help prevent future
problems.

Reported-by: Maninder Singh <maninder1.s@samsung.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>

ARM: 8579/1: mm: Fix definition of pmd_mknotpresent

commit 56530f5d2ddc9b9fade7ef8db9cb886e9dc689b5 upstream.

Currently pmd_mknotpresent will use a zero entry to respresent an
invalidated pmd.

Unfortunately this definition clashes with pmd_none, thus it is
possible for a race condition to occur if zap_pmd_range sees pmd_none
whilst __split_huge_pmd_locked is running too with pmdp_invalidate
just called.

This patch fixes the race condition by modifying pmd_mknotpresent to
create non-zero faulting entries (as is done in other architectures),
removing the ambiguity with pmd_none.

[catalin.marinas@arm.com: using L_PMD_SECT_VALID instead of PMD_TYPE_SECT]

Fixes: 8d9625070073 ("ARM: mm: Transparent huge page support for LPAE systems.")
Reported-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Cc: Russell King <linux@armlinux.org.uk>
Signed-off-by: Steve Capper <steve.capper@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>

nfs: don't create zero-length requests

commit 149a4fddd0a72d526abbeac0c8deaab03559836a upstream.

NFS doesn't expect requests with wb_bytes set to zero and may make
unexpected decisions about how to handle that request at the page IO layer.
Skip request creation if we won't have any wb_bytes in the request.

Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Reviewed-by: Weston Andros Adamson <dros@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>

random: properly align get_random_int_hash

commit b1132deac01c2332d234fa821a70022796b79182 upstream.

get_random_long() reads from the get_random_int_hash array using an
unsigned long pointer.  For this code to be guaranteed correct on all
architectures, the array must be aligned to an unsigned long boundary.

Signed-off-by: Eric Biggers <ebiggers3@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>

CIFS: Fix a possible invalid memory access in smb2_query_symlink()

commit 7893242e2465aea6f2cbc2639da8fa5ce96e8cc2 upstream.

During following a symbolic link we received err_buf from SMB2_open().
While the validity of SMB2 error response is checked previously
in smb2_check_message() a symbolic link payload is not checked at all.
Fix it by adding such checks.

Cc: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steve French <smfrench@gmail.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>

cifs: fix crash due to race in hmac(md5) handling

commit bd975d1eead2558b76e1079e861eacf1f678b73b upstream.

The secmech hmac(md5) structures are present in the TCP_Server_Info
struct and can be shared among multiple CIFS sessions.  However, the
server mutex is not currently held when these structures are allocated
and used, which can lead to a kernel crashes, as in the scenario below:

mount.cifs(8) #1 mount.cifs(8) #2

Is secmech.sdeschmaccmd5 allocated?
// false

Is secmech.sdeschmaccmd5 allocated?
// false

secmech.hmacmd = crypto_alloc_shash..
secmech.sdeschmaccmd5 = kzalloc..
sdeschmaccmd5->shash.tfm = &secmec.hmacmd;

secmech.sdeschmaccmd5 = kzalloc
// sdeschmaccmd5->shash.tfm
// not yet assigned

crypto_shash_update()
 deref NULL sdeschmaccmd5->shash.tfm

 Unable to handle kernel paging request at virtual address 00000030
 epc   : 8027ba34 crypto_shash_update+0x38/0x158
 ra    : 8020f2e8 setup_ntlmv2_rsp+0x4bc/0xa84
 Call Trace:
  crypto_shash_update+0x38/0x158
  setup_ntlmv2_rsp+0x4bc/0xa84
  build_ntlmssp_auth_blob+0xbc/0x34c
  sess_auth_rawntlmssp_authenticate+0xac/0x248
  CIFS_SessSetup+0xf0/0x178
  cifs_setup_session+0x4c/0x84
  cifs_get_smb_ses+0x2c8/0x314
  cifs_mount+0x38c/0x76c
  cifs_do_mount+0x98/0x440
  mount_fs+0x20/0xc0
  vfs_kern_mount+0x58/0x138
  do_mount+0x1e8/0xccc
  SyS_mount+0x88/0xd4
  syscall_common+0x30/0x54

Fix this by locking the srv_mutex around the code which uses these
hmac(md5) structures.  All the other secmech algos already have similar
locking.

Fixes: 95dc8dd14e2e84cc ("Limit allocation of crypto mechanisms to dialect which requires")
Signed-off-by: Rabin Vincent <rabinv@axis.com>
Acked-by: Sachin Prabhu <sprabhu@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>

cifs: Check for existing directory when opening file with O_CREAT

commit 8d9535b6efd86e6c07da59f97e68f44efb7fe080 upstream.

When opening a file with O_CREAT flag, check to see if the file opened
is an existing directory.

This prevents the directory from being opened which subsequently causes
a crash when the close function for directories cifs_closedir() is called
which frees up the file->private_data memory while the file is still
listed on the open file list for the tcon.

Signed-off-by: Sachin Prabhu <sprabhu@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Reported-by: Xiaoli Feng <xifeng@redhat.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>

Bluetooth: Fix l2cap_sock_setsockopt() with optname BT_RCVMTU

commit 23bc6ab0a0912146fd674a0becc758c3162baabc upstream.

When we retrieve imtu value from userspace we should use 16 bit pointer
cast instead of 32 as it's defined that way in headers. Fixes setsockopt
calls on big-endian platforms.

Signed-off-by: Amadeusz Sławiński <amadeusz.slawinski@tieto.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>

s5p-mfc: Add release callback for memory region devs

commit 6311f1261f59ce5e51fbe5cc3b5e7737197316ac upstream.

When s5p_mfc_remove() calls put_device() for the reserved memory region
devs, the driver core warns that the dev doesn't have a release callback:

WARNING: CPU: 0 PID: 591 at drivers/base/core.c:251 device_release+0x8c/0x90
Device 's5p-mfc-l' does not have a release() function, it is broken and must be fixed.

Also, the declared DMA memory using dma_declare_coherent_memory() isn't
relased so add a dev .release that calls dma_release_declared_memory().

Fixes: 6e83e6e25eb4 ("[media] s5p-mfc: Fix kernel warning on memory init")
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>

s5p-mfc: Set device name for reserved memory region devs

commit 29debab0a94035a390801d1f177d171d014b7765 upstream.

The devices don't have a name set, so makes dev_name() returns NULL which
makes harder to identify the devices that are causing issues, for example:

WARNING: CPU: 2 PID: 616 at drivers/base/core.c:251 device_release+0x8c/0x90
Device '(null)' does not have a release() function, it is broken and must be fixed.

And after setting the device name:

WARNING: CPU: 0 PID: 591 at drivers/base/core.c:251 device_release+0x8c/0x90
Device 's5p-mfc-l' does not have a release() function, it is broken and must be fixed.

Fixes: 6e83e6e25eb4 ("[media] s5p-mfc: Fix kernel warning on memory init")
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>

gpio: pca953x: Fix NBANK calculation for PCA9536

commit a246b8198f776a16d1d3a3bbfc2d437bad766b29 upstream.

NBANK() macro assumes that ngpios is a multiple of 8(BANK_SZ) and
hence results in 0 banks for PCA9536 which has just 4 gpios. This is
wrong as PCA9356 has 1 bank with 4 gpios. This results in uninitialized
PCA953X_INVERT register. Fix this by using DIV_ROUND_UP macro in
NBANK().

Signed-off-by: Vignesh R <vigneshr@ti.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>

USB: serial: option: add support for Telit LE910 PID 0x1206

commit 3c0415fa08548e3bc63ef741762664497ab187ed upstream.

This patch adds support for 0x1206 PID of Telit LE910.

Since the interfaces positions are the same than the ones for
0x1043 PID of Telit LE922, telit_le922_blacklist_usbcfg3 is used.

Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>

usb: renesas_usbhs: protect the CFIFOSEL setting in usbhsg_ep_enable()

commit 15e4292a2d21e9997fdb2b8c014cc461b3f268f0 upstream.

This patch fixes an issue that the CFIFOSEL register value is possible
to be changed by usbhsg_ep_enable() wrongly. And then, a data transfer
using CFIFO may not work correctly.

For example:
 # modprobe g_multi file=usb-storage.bin
 # ifconfig usb0 192.168.1.1 up
 (During the USB host is sending file to the mass storage)
 # ifconfig usb0 down

In this case, since the u_ether.c may call usb_ep_enable() in
eth_stop(), if the renesas_usbhs driver is also using CFIFO for
mass storage, the mass storage may not work correctly.

So, this patch adds usbhs_lock() and usbhs_unlock() calling in
usbhsg_ep_enable() to protect CFIFOSEL register. This is because:
 - CFIFOSEL.CURPIPE = 0 is also needed for the pipe configuration
 - The CFIFOSEL (fifo->sel) is already protected by usbhs_lock()

Fixes: 97664a207bc2 ("usb: renesas_usbhs: shrink spin lock area")
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>

ext4: fix reference counting bug on block allocation error

commit 554a5ccc4e4a20c5f3ec859de0842db4b4b9c77e upstream.

If we hit this error when mounted with errors=continue or
errors=remount-ro:

    EXT4-fs error (device loop0): ext4_mb_mark_diskspace_used:2940: comm ext4.exe: Allocating blocks 5090-6081 which overlap fs metadata

then ext4_mb_new_blocks() will call ext4_mb_release_context() and try to
continue. However, ext4_mb_release_context() is the wrong thing to call
here since we are still actually using the allocation context.

Instead, just error out. We could retry the allocation, but there is a
possibility of getting stuck in an infinite loop instead, so this seems
safer.

[ Fixed up so we don't return EAGAIN to userspace. --tytso ]

Fixes: 8556e8f3b6 ("ext4: Don't allow new groups to be added during block allocation")
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>

ext4: short-cut orphan cleanup on error

commit c65d5c6c81a1f27dec5f627f67840726fcd146de upstream.

If we encounter a filesystem error during orphan cleanup, we should stop.
Otherwise, we may end up in an infinite loop where the same inode is
processed again and again.

    EXT4-fs (loop0): warning: checktime reached, running e2fsck is recommended
    EXT4-fs error (device loop0): ext4_mb_generate_buddy:758: group 2, block bitmap and bg descriptor inconsistent: 6117 vs 0 free clusters
    Aborting journal on device loop0-8.
    EXT4-fs (loop0): Remounting filesystem read-only
    EXT4-fs error (device loop0) in ext4_free_blocks:4895: Journal has aborted
    EXT4-fs error (device loop0) in ext4_do_update_inode:4893: Journal has aborted
    EXT4-fs error (device loop0) in ext4_do_update_inode:4893: Journal has aborted
    EXT4-fs error (device loop0) in ext4_ext_remove_space:3068: IO failure
    EXT4-fs error (device loop0) in ext4_ext_truncate:4667: Journal has aborted
    EXT4-fs error (device loop0) in ext4_orphan_del:2927: Journal has aborted
    EXT4-fs error (device loop0) in ext4_do_update_inode:4893: Journal has aborted
    EXT4-fs (loop0): Inode 16 (00000000618192a0): orphan list check failed!
    [...]
    EXT4-fs (loop0): Inode 16 (0000000061819748): orphan list check failed!
    [...]
    EXT4-fs (loop0): Inode 16 (0000000061819bf0): orphan list check failed!
    [...]

See-also: c9eb13a9105 ("ext4: fix hang when processing corrupted orphaned inode list")
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>

ext4: don't call ext4_should_journal_data() on the journal inode

commit 6a7fd522a7c94cdef0a3b08acf8e6702056e635c upstream.

If ext4_fill_super() fails early, it's possible for ext4_evict_inode()
to call ext4_should_journal_data() before superblock options and flags
are fully set up.  In that case, the iput() on the journal inode can
end up causing a BUG().

Work around this problem by reordering the tests so we only call
ext4_should_journal_data() after we know it's not the journal inode.

Fixes: 2d859db3e4 ("ext4: fix data corruption in inodes with journalled data")
Fixes: 2b405bfa84 ("ext4: fix data=journal fast mount/umount hang")
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>

ext4: fix deadlock during page writeback

commit 646caa9c8e196880b41cd3e3d33a2ebc752bdb85 upstream.

Commit 06bd3c36a733 (ext4: fix data exposure after a crash) uncovered a
deadlock in ext4_writepages() which was previously much harder to hit.
After this commit xfstest generic/130 reproduces the deadlock on small
filesystems.

The problem happens when ext4_do_update_inode() sets LARGE_FILE feature
and marks current inode handle as synchronous. That subsequently results
in ext4_journal_stop() called from ext4_writepages() to block waiting for
transaction commit while still holding page locks, reference to io_end,
and some prepared bio in mpd structure each of which can possibly block
transaction commit from completing and thus results in deadlock.

Fix the problem by releasing page locks, io_end reference, and
submitting prepared bio before calling ext4_journal_stop().

[ Changed to defer the call to ext4_journal_stop() only if the handle
  is synchronous.  --tytso ]

Reported-and-tested-by: Eryu Guan <eguan@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>

ext4: check for extents that wrap around

commit f70749ca42943faa4d4dcce46dfdcaadb1d0c4b6 upstream.

An extent with lblock = 4294967295 and len = 1 will pass the
ext4_valid_extent() test:

ext4_lblk_t last = lblock + len - 1;

if (len == 0 || lblock > last)
return 0;

since last = 4294967295 + 1 - 1 = 4294967295. This would later trigger
the BUG_ON(es->es_lblk + es->es_len < es->es_lblk) in ext4_es_end().

We can simplify it by removing the - 1 altogether and changing the test
to use lblock + len <= lblock, since now if len = 0, then lblock + 0 ==
lblock and it fails, and if len > 0 then lblock + len > lblock in order
to pass (i.e. it doesn't overflow).

Fixes: 5946d0893 ("ext4: check for overlapping extents in ext4_valid_extent_entries()")
Fixes: 2f974865f ("ext4: check for zero length extent explicitly")
Cc: Eryu Guan <guaneryu@gmail.com>
Signed-off-by: Phil Turnbull <phil.turnbull@oracle.com>
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>

crypto: scatterwalk - Fix test in scatterwalk_done

commit 5f070e81bee35f1b7bd1477bb223a873ff657803 upstream.

When there is more data to be processed, the current test in
scatterwalk_done may prevent us from calling pagedone even when
we should.

In particular, if we're on an SG entry spanning multiple pages
where the last page is not a full page, we will incorrectly skip
calling pagedone on the second last page.

This patch fixes this by adding a separate test for whether we've
reached the end of a page.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>