PCI: Align checking of syscall user config accessors

[ Upstream commit ef9e4005cbaf022c6251263aa27836acccaef65d ]

After 34e3207205ef ("PCI: handle positive error codes"),
pci_user_read_config_*() and pci_user_write_config_*() return 0 or negative
errno values, not PCIBIOS_* values like PCIBIOS_SUCCESSFUL or
PCIBIOS_BAD_REGISTER_NUMBER.

Remove comparisons with PCIBIOS_SUCCESSFUL and check only for non-zero.  It
happens that PCIBIOS_SUCCESSFUL is zero, so this is not a functional
change, but it aligns this code with the user accessors.

[bhelgaas: commit log]
Fixes: 34e3207205ef ("PCI: handle positive error codes")
Link: https://lore.kernel.org/r/f1220314-e518-1e18-bf94-8e6f8c703758@gmail.com
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

VMCI: Use set_page_dirty_lock() when unregistering guest memory

[ Upstream commit 5a16c535409f8dcb7568e20737309e3027ae3e49 ]

When the VMCI host support releases guest memory in the case where
the VM was killed, the pinned guest pages aren't locked. Use
set_page_dirty_lock() instead of set_page_dirty().

Testing done: Killed VM while having an active VMCI based vSocket
connection and observed warning from ext4. With this fix, no
warning was observed. Ran various vSocket tests without issues.

Fixes: 06164d2b72aa ("VMCI: queue pairs implementation.")
Reviewed-by: Vishnu Dasa <vdasa@vmware.com>
Signed-off-by: Jorgen Hansen <jhansen@vmware.com>
Link: https://lore.kernel.org/r/1611160360-30299-1-git-send-email-jhansen@vmware.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pwm: rockchip: rockchip_pwm_probe(): Remove superfluous clk_unprepare()

[ Upstream commit d5d8d675865ccddfe4da26c85f22c55cec663bf2 ]

If rockchip_pwm_probe() fails to register a PWM device it calls
clk_unprepare() for the device's PWM clock, without having first disabled
the clock and before jumping to an error handler that also unprepares
it. This is likely to produce warnings from the kernel about the clock
being unprepared when it is still enabled, and then being unprepared when
it has already been unprepared.

Prevent these warnings by removing this unnecessary call to
clk_unprepare().

Fixes: 48cf973cae33 ("pwm: rockchip: Avoid glitches on already running PWMs")
Signed-off-by: Simon South <simon@simonsouth.net>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

misc: eeprom_93xx46: Add module alias to avoid breaking support for non device tree users

[ Upstream commit 4540b9fbd8ebb21bb3735796d300a1589ee5fbf2 ]

Module alias "spi:93xx46" is used by non device tree users like
drivers/misc/eeprom/digsy_mtc_eeprom.c  and removing it will
break support for them.

Fix this by adding back the module alias "spi:93xx46".

Fixes: 13613a2246bf ("misc: eeprom_93xx46: Fix module alias to enable module autoprobe")
Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
Link: https://lore.kernel.org/r/20210113051253.15061-1-a-govindraju@ti.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

misc: eeprom_93xx46: Fix module alias to enable module autoprobe

[ Upstream commit 13613a2246bf531f5fc04e8e62e8f21a3d39bf1c ]

Fix module autoprobe by correcting module alias to match the string from
/sys/class/.../spi1.0/modalias content.

Fixes: 06b4501e88ad ("misc/eeprom: add driver for microwire 93xx46 EEPROMs")
Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
Link: https://lore.kernel.org/r/20210107163957.28664-2-a-govindraju@ti.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

sparc64: only select COMPAT_BINFMT_ELF if BINFMT_ELF is set

[ Upstream commit 80bddf5c93a99e11fc9faf7e4b575d01cecd45d3 ]

Currently COMPAT on SPARC64 selects COMPAT_BINFMT_ELF unconditionally,
even when BINFMT_ELF is not enabled. This causes a kconfig warning.

Instead, just select COMPAT_BINFMT_ELF if BINFMT_ELF is enabled.
This builds cleanly with no kconfig warnings.

WARNING: unmet direct dependencies detected for COMPAT_BINFMT_ELF
  Depends on [n]: COMPAT [=y] && BINFMT_ELF [=n]
  Selected by [y]:
  - COMPAT [=y] && SPARC64 [=y]

Fixes: 26b4c912185a ("sparc,sparc64: unify Kconfig files")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: sparclinux@vger.kernel.org
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Input: elo - fix an error code in elo_connect()

[ Upstream commit 0958351e93fa0ac142f6dd8bd844441594f30a57 ]

If elo_setup_10() fails then this should return an error code instead
of success.

Fixes: fae3006e4b42 ("Input: elo - add support for non-pressure-sensitive touchscreens")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/YBKFd5CvDu+jVmfW@mwanda
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf test: Fix unaligned access in sample parsing test

[ Upstream commit c5c97cadd7ed13381cb6b4bef5c841a66938d350 ]

The ubsan reported the following error.  It was because sample's raw
data missed u32 padding at the end.  So it broke the alignment of the
array after it.

The raw data contains an u32 size prefix so the data size should have
an u32 padding after 8-byte aligned data.

27: Sample parsing  :util/synthetic-events.c:1539:4:
  runtime error: store to misaligned address 0x62100006b9bc for type
  '__u64' (aka 'unsigned long long'), which requires 8 byte alignment
0x62100006b9bc: note: pointer points here
  00 00 00 00 ff ff ff ff  ff ff ff ff ff ff ff ff  ff ff ff ff ff ff ff ff  ff ff ff ff ff ff ff ff
              ^
    #0 0x561532a9fc96 in perf_event__synthesize_sample util/synthetic-events.c:1539:13
    #1 0x5615327f4a4f in do_test tests/sample-parsing.c:284:8
    #2 0x5615327f3f50 in test__sample_parsing tests/sample-parsing.c:381:9
    #3 0x56153279d3a1 in run_test tests/builtin-test.c:424:9
    #4 0x56153279c836 in test_and_print tests/builtin-test.c:454:9
    #5 0x56153279b7eb in __cmd_test tests/builtin-test.c:675:4
    #6 0x56153279abf0 in cmd_test tests/builtin-test.c:821:9
    #7 0x56153264e796 in run_builtin perf.c:312:11
    #8 0x56153264cf03 in handle_internal_command perf.c:364:8
    #9 0x56153264e47d in run_argv perf.c:408:2
    #10 0x56153264c9a9 in main perf.c:538:3
    #11 0x7f137ab6fbbc in __libc_start_main (/lib64/libc.so.6+0x38bbc)
    #12 0x561532596828 in _start ...

SUMMARY: UndefinedBehaviorSanitizer: misaligned-pointer-use
 util/synthetic-events.c:1539:4 in

Fixes: 045f8cd8542d ("perf tests: Add a sample parsing test")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20210214091638.519643-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf intel-pt: Fix missing CYC processing in PSB

[ Upstream commit 03fb0f859b45d1eb05c984ab4bd3bef67e45ede2 ]

Add missing CYC packet processing when walking through PSB+. This
improves the accuracy of timestamps that follow PSB+, until the next
MTC.

Fixes: 3d49807870f08 ("perf tools: Add new Intel PT packet definitions")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/r/20210205175350.23817-2-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

spi: pxa2xx: Fix the controller numbering for Wildcat Point

[ Upstream commit 54c5d3bfb0cfb7b31259765524567871dee11615 ]

Wildcat Point has two SPI controllers and added one is actually second one.
Fix the numbering by adding the description of the first one.

Fixes: caba248db286 ("spi: spi-pxa2xx-pci: Add ID and driver type for WildcatPoint PCH")
Cc: Leif Liddy <leif.liddy@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210208163816.22147-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/8xx: Fix software emulation interrupt

[ Upstream commit 903178d0ce6bb30ef80a3604ab9ee2b57869fbc9 ]

For unimplemented instructions or unimplemented SPRs, the 8xx triggers
a "Software Emulation Exception" (0x1000). That interrupt doesn't set
reason bits in SRR1 as the "Program Check Exception" does.

Go through emulation_assist_interrupt() to set REASON_ILLEGAL.

Fixes: fbbcc3bb139e ("powerpc/8xx: Remove SoftwareEmulation()")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/ad782af87a222efc79cfb06079b0fd23d4224eaf.1612515180.git.christophe.leroy@csgroup.eu
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/pseries/dlpar: handle ibm, configure-connector delay status

[ Upstream commit 768d70e19ba525debd571b36e6d0ab19956c63d7 ]

dlpar_configure_connector() has two problems in its handling of
ibm,configure-connector's return status:

1. When the status is -2 (busy, call again), we call
   ibm,configure-connector again immediately without checking whether
   to schedule, which can result in monopolizing the CPU.
2. Extended delay status (9900..9905) goes completely unhandled,
   causing the configuration to unnecessarily terminate.

Fix both of these issues by using rtas_busy_delay().

Fixes: ab519a011caa ("powerpc/pseries: Kernel DLPAR Infrastructure")
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Reviewed-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210107025900.410369-1-nathanl@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

mfd: wm831x-auxadc: Prevent use after free in wm831x_auxadc_read_irq()

[ Upstream commit 26783d74cc6a440ee3ef9836a008a697981013d0 ]

The "req" struct is always added to the "wm831x->auxadc_pending" list,
but it's only removed from the list on the success path.  If a failure
occurs then the "req" struct is freed but it's still on the list,
leading to a use after free.

Fixes: 78bb3688ea18 ("mfd: Support multiple active WM831x AUXADC conversions")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

spi: stm32: properly handle 0 byte transfer

[ Upstream commit 2269f5a8b1a7b38651d62676b98182828f29d11a ]

On 0 byte transfer request, return straight from the
xfer function after finalizing the transfer.

Fixes: dcbe0d84dfa5 ("spi: add driver for STM32 SPI controller")
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Link: https://lore.kernel.org/r/1612551572-495-2-git-send-email-alain.volmat@foss.st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/rxe: Fix coding error in rxe_recv.c

[ Upstream commit 7d9ae80e31df57dd3253e1ec514f0000aa588a81 ]

check_type_state() in rxe_recv.c is written as if the type bits in the
packet opcode were a bit mask which is not correct. This patch corrects
this code to compare all 3 type bits to the required type.

Fixes: 8700e3e7c485 ("Soft RoCE driver")
Link: https://lore.kernel.org/r/20210127214500.3707-1-rpearson@hpe.com
Signed-off-by: Bob Pearson <rpearson@hpe.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf tools: Fix DSO filtering when not finding a map for a sampled address

[ Upstream commit c69bf11ad3d30b6bf01cfa538ddff1a59467c734 ]

When we lookup an address and don't find a map we should filter that
sample if the user specified a list of --dso entries to filter on, fix
it.

Before:

  $ perf script
             sleep 274800  2843.556162:          1 cycles:u:  ffffffffbb26bff4 [unknown] ([unknown])
             sleep 274800  2843.556168:          1 cycles:u:  ffffffffbb2b047d [unknown] ([unknown])
             sleep 274800  2843.556171:          1 cycles:u:  ffffffffbb2706b2 [unknown] ([unknown])
             sleep 274800  2843.556174:          6 cycles:u:  ffffffffbb2b0267 [unknown] ([unknown])
             sleep 274800  2843.556176:         59 cycles:u:  ffffffffbb2b03b1 [unknown] ([unknown])
             sleep 274800  2843.556180:        691 cycles:u:  ffffffffbb26bff4 [unknown] ([unknown])
             sleep 274800  2843.556189:       9160 cycles:u:      7fa9550eeaa3 __GI___tunables_init+0xf3 (/usr/lib64/ld-2.32.so)
             sleep 274800  2843.556312:      86937 cycles:u:      7fa9550e157b _dl_lookup_symbol_x+0x4b (/usr/lib64/ld-2.32.so)
  $

So we have some samples we somehow didn't find in a map for, if we now
do:

  $ perf report --stdio --dso /usr/lib64/ld-2.32.so
  # dso: /usr/lib64/ld-2.32.so
  #
  # Total Lost Samples: 0
  #
  # Samples: 8  of event 'cycles:u'
  # Event count (approx.): 96856
  #
  # Overhead  Command  Symbol
  # ........  .......  ........................
  #
      89.76%  sleep    [.] _dl_lookup_symbol_x
       9.46%  sleep    [.] __GI___tunables_init
       0.71%  sleep    [k] 0xffffffffbb26bff4
       0.06%  sleep    [k] 0xffffffffbb2b03b1
       0.01%  sleep    [k] 0xffffffffbb2b0267
       0.00%  sleep    [k] 0xffffffffbb2706b2
       0.00%  sleep    [k] 0xffffffffbb2b047d
  $

After this patch we get the right output with just entries for the DSOs
specified in --dso:

  $ perf report --stdio --dso /usr/lib64/ld-2.32.so
  # dso: /usr/lib64/ld-2.32.so
  #
  # Total Lost Samples: 0
  #
  # Samples: 8  of event 'cycles:u'
  # Event count (approx.): 96856
  #
  # Overhead  Command  Symbol
  # ........  .......  ........................
  #
      89.76%  sleep    [.] _dl_lookup_symbol_x
       9.46%  sleep    [.] __GI___tunables_init
  $
  #

Fixes: 96415e4d3f5fdf9c ("perf symbols: Avoid unnecessary symbol loading when dso list is specified")
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20210128131209.GD775562@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tracepoint: Do not fail unregistering a probe due to memory failure

[ Upstream commit befe6d946551d65cddbd32b9cb0170b0249fd5ed ]

The list of tracepoint callbacks is managed by an array that is protected
by RCU. To update this array, a new array is allocated, the updates are
copied over to the new array, and then the list of functions for the
tracepoint is switched over to the new array. After a completion of an RCU
grace period, the old array is freed.

This process happens for both adding a callback as well as removing one.
But on removing a callback, if the new array fails to be allocated, the
callback is not removed, and may be used after it is freed by the clients
of the tracepoint.

There's really no reason to fail if the allocation for a new array fails
when removing a function. Instead, the function can simply be replaced by a
stub function that could be cleaned up on the next modification of the
array. That is, instead of calling the function registered to the
tracepoint, it would call a stub function in its place.

Link: https://lore.kernel.org/r/20201115055256.65625-1-mmullins@mmlx.us
Link: https://lore.kernel.org/r/20201116175107.02db396d@gandalf.local.home
Link: https://lore.kernel.org/r/20201117211836.54acaef2@oasis.local.home
Link: https://lkml.kernel.org/r/20201118093405.7a6d2290@gandalf.local.home
[ Note, this version does use undefined compiler behavior (assuming that
  a stub function with no parameters or return, can be called by a location
  that thinks it has parameters but still no return value. Static calls
  do the same thing, so this trick is not without precedent.

  There's another solution that uses RCU tricks and is more complex, but
  can be an alternative if this solution becomes an issue.

Link: https://lore.kernel.org/lkml/20210127170721.58bce7cc@gandalf.local.home/
]

Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Yonghong Song <yhs@fb.com>
Cc: Andrii Nakryiko <andriin@fb.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: KP Singh <kpsingh@chromium.org>
Cc: netdev <netdev@vger.kernel.org>
Cc: bpf <bpf@vger.kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Florian Weimer <fw@deneb.enyo.de>
Fixes: 97e1c18e8d17b ("tracing: Kernel Tracepoints")
Reported-by: syzbot+83aa762ef23b6f0d1991@syzkaller.appspotmail.com
Reported-by: syzbot+d29e58bb557324e55e5e@syzkaller.appspotmail.com
Reported-by: Matt Mullins <mmullins@mmlx.us>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Tested-by: Matt Mullins <mmullins@mmlx.us>
Signed-off-by: Sasha Levin <sashal@kernel.org>

amba: Fix resource leak for drivers without .remove

[ Upstream commit de5d7adb89367bbc87b4e5ce7afe7ae9bd86dc12 ]

Consider an amba driver with a .probe but without a .remove callback (e.g.
pl061_gpio_driver). The function amba_probe() is called to bind a device
and so dev_pm_domain_attach() and others are called. As there is no remove
callback amba_remove() isn't called at unbind time however and so calling
dev_pm_domain_detach() is missed and the pm domain keeps active.

To fix this always use the core driver callbacks and handle missing amba
callbacks there. For probe refuse registration as a driver without probe
doesn't make sense.

Fixes: 7cfe249475fd ("ARM: AMBA: Add pclk support to AMBA bus infrastructure")
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20210126165835.687514-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: 9046/1: decompressor: Do not clear SCTLR.nTLSMD for ARMv7+ cores

[ Upstream commit 2acb909750431030b65a0a2a17fd8afcbd813a84 ]

It was observed that decompressor running on hardware implementing ARM v8.2
Load/Store Multiple Atomicity and Ordering Control (LSMAOC), say, as guest,
would stuck just after:

Uncompressing Linux... done, booting the kernel.

The reason is that it clears nTLSMD bit when disabling caches:

  nTLSMD, bit [3]

  When ARMv8.2-LSMAOC is implemented:

    No Trap Load Multiple and Store Multiple to
    Device-nGRE/Device-nGnRE/Device-nGnRnE memory.

    0b0 All memory accesses by A32 and T32 Load Multiple and Store
        Multiple at EL1 or EL0 that are marked at stage 1 as
        Device-nGRE/Device-nGnRE/Device-nGnRnE memory are trapped and
        generate a stage 1 Alignment fault.

    0b1 All memory accesses by A32 and T32 Load Multiple and Store
        Multiple at EL1 or EL0 that are marked at stage 1 as
        Device-nGRE/Device-nGnRE/Device-nGnRnE memory are not trapped.

  This bit is permitted to be cached in a TLB.

  This field resets to 1.

  Otherwise:

  Reserved, RES1

So as effect we start getting traps we are not quite ready for.

Looking into history it seems that mask used for SCTLR clear came from
the similar code for ARMv4, where bit[3] is the enable/disable bit for
the write buffer. That not applicable to ARMv7 and onwards, so retire
that bit from the masks.

Fixes: 7d09e85448dfa78e3e58186c934449aaf6d49b50 ("[ARM] 4393/2: ARMv7: Add uncompressing code for the new CPU Id format")
Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mmc: usdhi6rol0: Fix a resource leak in the error handling path of the probe

[ Upstream commit 6052b3c370fb82dec28bcfff6d7ec0da84ac087a ]

A call to 'ausdhi6_dma_release()' to undo a previous call to
'usdhi6_dma_request()' is missing in the error handling path of the probe
function.

It is already present in the remove function.

Fixes: 75fa9ea6e3c0 ("mmc: add a driver for the Renesas usdhi6rol0 SD/SDIO host controller")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/20201217210922.165340-1-christophe.jaillet@wanadoo.fr
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/47x: Disable 256k page size

[ Upstream commit 910a0cb6d259736a0c86e795d4c2f42af8d0d775 ]

PPC47x_TLBE_SIZE isn't defined for 256k pages, leading to a build
break if 256k pages is selected.

So change the kconfig so that 256k pages can't be selected for 47x.

Fixes: e7f75ad01d59 ("powerpc/47x: Base ppc476 support")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
[mpe: Expand change log to mention build break]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/2fed79b1154c872194f98bac4422c23918325e61.1611128938.git.christophe.leroy@csgroup.eu
Signed-off-by: Sasha Levin <sashal@kernel.org>

IB/umad: Return EIO in case of when device disassociated

[ Upstream commit 4fc5461823c9cad547a9bdfbf17d13f0da0d6bb5 ]

MAD message received by the user has EINVAL error in all flows
including when the device is disassociated. That makes it impossible
for the applications to treat such flow differently.

Change it to return EIO, so the applications will be able to perform
disassociation recovery.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Link: https://lore.kernel.org/r/20210125121339.837518-2-leon@kernel.org
Signed-off-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

auxdisplay: ht16k33: Fix refresh rate handling

[ Upstream commit e89b0a426721a8ca5971bc8d70aa5ea35c020f90 ]

Drop the call to msecs_to_jiffies(), as "HZ / fbdev->refresh_rate" is
already the number of jiffies to wait.

Fixes: 8992da44c6805d53 ("auxdisplay: ht16k33: Driver for LED controller")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

isofs: release buffer head before return

[ Upstream commit 0a6dc67a6aa45f19bd4ff89b4f468fc50c4b8daa ]

Release the buffer_head before returning error code in
do_isofs_readdir() and isofs_find_entry().

Fixes: 2deb1acc653c ("isofs: fix access to unallocated memory when reading corrupted filesystem")
Link: https://lore.kernel.org/r/20210118120455.118955-1-bianpan2016@163.com
Signed-off-by: Pan Bian <bianpan2016@163.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>

spi: atmel: Put allocated master before return

[ Upstream commit 21ea2743f015dbacec1831bdc8afc848db9c2b8c ]

The allocated master is not released. Goto error handling label rather
than directly return.

Fixes: 5e9af37e46bc ("spi: atmel: introduce probe deferring")
Signed-off-by: Pan Bian <bianpan2016@163.com>
Fixes: 5e9af37e46bc ("spi: atmel: introduce probe deferring")
Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Link: https://lore.kernel.org/r/20210120050025.25426-1-bianpan2016@163.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

certs: Fix blacklist flag type confusion

[ Upstream commit 4993e1f9479a4161fd7d93e2b8b30b438f00cb0f ]

KEY_FLAG_KEEP is not meant to be passed to keyring_alloc() or key_alloc(),
as these only take KEY_ALLOC_* flags.  KEY_FLAG_KEEP has the same value as
KEY_ALLOC_BYPASS_RESTRICTION, but fortunately only key_create_or_update()
uses it.  LSMs using the key_alloc hook don't check that flag.

KEY_FLAG_KEEP is then ignored but fortunately (again) the root user cannot
write to the blacklist keyring, so it is not possible to remove a key/hash
from it.

Fix this by adding a KEY_ALLOC_SET_KEEP flag that tells key_alloc() to set
KEY_FLAG_KEEP on the new key.  blacklist_init() can then, correctly, pass
this to keyring_alloc().

We can also use this in ima_mok_init() rather than setting the flag
manually.

Note that this doesn't fix an observable bug with the current
implementation but it is required to allow addition of new hashes to the
blacklist in the future without making it possible for them to be removed.

Fixes: 734114f8782f ("KEYS: Add a system blacklist keyring")
Reported-by: Mickaël Salaün <mic@linux.microsoft.com>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Mickaël Salaün <mic@linux.microsoft.com>
cc: Mimi Zohar <zohar@linux.vnet.ibm.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

regulator: axp20x: Fix reference cout leak

[ Upstream commit e78bf6be7edaacb39778f3a89416caddfc6c6d70 ]

Decrements the reference count of device node and its child node.

Fixes: dfe7a1b058bb ("regulator: AXP20x: Add support for regulators subsystem")
Signed-off-by: Pan Bian <bianpan2016@163.com>
Link: https://lore.kernel.org/r/20210120123313.107640-1-bianpan2016@163.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clocksource/drivers/mxs_timer: Add missing semicolon when DEBUG is defined

[ Upstream commit 7da390694afbaed8e0f05717a541dfaf1077ba51 ]

When DEBUG is defined this error occurs

drivers/clocksource/mxs_timer.c:138:1: error:
  expected ‘;’ before ‘}’ token

The preceding statement needs a semicolon.
Replace pr_info() with pr_debug() and remove the unneeded ifdef.

Fixes: eb8703e2ef7c ("clockevents/drivers/mxs: Migrate to new 'set-state' interface")
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20210118211955.763609-1-trix@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

rtc: s5m: select REGMAP_I2C

[ Upstream commit 1f0cbda3b452b520c5f3794f8f0e410e8bc7386a ]

The rtc-s5m uses the I2C regmap but doesn't select it in Kconfig so
depending on the configuration the build may fail. Fix it.

Fixes: 959df7778bbd ("rtc: Enable compile testing for Maxim and Samsung drivers")
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20210114102219.23682-2-brgl@bgdev.pl
Signed-off-by: Sasha Levin <sashal@kernel.org>

power: reset: at91-sama5d2_shdwc: fix wkupdbc mask

[ Upstream commit 95aa21a3f1183260db1b0395e03df5bebc5ed641 ]

According to datasheet WKUPDBC mask is b/w bits 26..24.

Fixes: f80cb48843987 ("power: reset: at91-shdwc: add new shutdown controller driver")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

of/fdt: Make sure no-map does not remove already reserved regions

[ Upstream commit 8a5a75e5e9e55de1cef5d83ca3589cb4899193ef ]

If the device tree is incorrectly configured, and attempts to
define a "no-map" reserved memory that overlaps with the kernel
data/code, the kernel would crash quickly after boot, with no
obvious clue about the nature of the issue.

For example, this would happen if we have the kernel mapped at
these addresses (from /proc/iomem):
40000000-41ffffff : System RAM
  40080000-40dfffff : Kernel code
  40e00000-411fffff : reserved
  41200000-413e0fff : Kernel data

And we declare a no-map shared-dma-pool region at a fixed address
within that range:
mem_reserved: mem_region {
compatible = "shared-dma-pool";
reg = <0 0x40000000 0 0x01A00000>;
no-map;
};

To fix this, when removing memory regions at early boot (which is
what "no-map" regions do), we need to make sure that the memory
is not already reserved. If we do, __reserved_mem_reserve_reg
will throw an error:
[    0.000000] OF: fdt: Reserved memory: failed to reserve memory
   for node 'mem_region': base 0x0000000040000000, size 26 MiB
and the code that will try to use the region should also fail,
later on.

We do not do anything for non-"no-map" regions, as memblock
explicitly allows reserved regions to overlap, and the commit
that this fixes removed the check for that precise reason.

[ qperret: fixed conflicts caused by the usage of memblock_mark_nomap ]

Fixes: 094cb98179f19b7 ("of/fdt: memblock_reserve /memreserve/ regions in the case of partial overlap")
Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Quentin Perret <qperret@google.com>
Link: https://lore.kernel.org/r/20210115114544.1830068-3-qperret@google.com
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

fdt: Properly handle "no-map" field in the memory region

[ Upstream commit 86588296acbfb1591e92ba60221e95677ecadb43 ]

Mark the memory region with NOMAP flag instead of completely removing it
from the memory blocks. That makes the FDT handling consistent with the EFI
memory map handling.

Cc: Rob Herring <robh+dt@kernel.org>
Cc: Frank Rowand <frowand.list@gmail.com>
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: KarimAllah Ahmed <karahmed@amazon.de>
Signed-off-by: Quentin Perret <qperret@google.com>
Link: https://lore.kernel.org/r/20210115114544.1830068-2-qperret@google.com
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mfd: bd9571mwv: Use devm_mfd_add_devices()

[ Upstream commit c58ad0f2b052b5675d6394e03713ee41e721b44c ]

To remove mfd devices when unload this driver, should use
devm_mfd_add_devices() instead.

Fixes: d3ea21272094 ("mfd: Add ROHM BD9571MWV-M MFD PMIC driver")
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Acked-for-MFD-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dmaengine: hsu: disable spurious interrupt

[ Upstream commit 035b73b2b3b2e074a56489a7bf84b6a8012c0e0d ]

On Intel Tangier B0 and Anniedale the interrupt line, disregarding
to have different numbers, is shared between HSU DMA and UART IPs.
Thus on such SoCs we are expecting that IRQ handler is called in
UART driver only. hsu_pci_irq was handling the spurious interrupt
from HSU DMA by returning immediately. This wastes CPU time and
since HSU DMA and HSU UART interrupt occur simultaneously they race
to be handled causing delay to the HSU UART interrupt handling.
Fix this by disabling the interrupt entirely.

Fixes: 4831e0d9054c ("serial: 8250_mid: handle interrupt correctly in DMA case")
Signed-off-by: Ferry Toth <ftoth@exalondelft.nl>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20210112223749.97036-1-ftoth@exalondelft.nl
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dmaengine: fsldma: Fix a resource leak in an error handling path of the probe function

[ Upstream commit b202d4e82531a62a33a6b14d321dd2aad491578e ]

In case of error, the previous 'fsl_dma_chan_probe()' calls must be undone
by some 'fsl_dma_chan_remove()', as already done in the remove function.

It was added in the remove function in commit 77cd62e8082b ("fsldma: allow
Freescale Elo DMA driver to be compiled as a module")

Fixes: d3f620b2c4fe ("fsldma: simplify IRQ probing and handling")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/20201212160614.92576-1-christophe.jaillet@wanadoo.fr
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dmaengine: fsldma: Fix a resource leak in the remove function

[ Upstream commit cbc0ad004c03ad7971726a5db3ec84dba3dcb857 ]

A 'irq_dispose_mapping()' call is missing in the remove function.
Add it.

This is needed to undo the 'irq_of_parse_and_map() call from the probe
function and already part of the error handling path of the probe function.

It was added in the probe function only in commit d3f620b2c4fe ("fsldma:
simplify IRQ probing and handling")

Fixes: 77cd62e8082b ("fsldma: allow Freescale Elo DMA driver to be compiled as a module")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/20201212160516.92515-1-christophe.jaillet@wanadoo.fr
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

HID: core: detect and skip invalid inputs to snto32()

[ Upstream commit a0312af1f94d13800e63a7d0a66e563582e39aec ]

Prevent invalid (0, 0) inputs to hid-core's snto32() function.

Maybe it is just the dummy device here that is causing this, but
there are hundreds of calls to snto32(0, 0). Having n (bits count)
of 0 is causing the current UBSAN trap with a shift value of
0xffffffff (-1, or n - 1 in this function).

Either of the value to shift being 0 or the bits count being 0 can be
handled by just returning 0 to the caller, avoiding the following
complex shift + OR operations:

return value & (1 << (n - 1)) ? value | (~0U << n) : value;

Fixes: dde5845a529f ("[PATCH] Generic HID layer - code split")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: syzbot+1e911ad71dd4ea72e04a@syzkaller.appspotmail.com
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: linux-input@vger.kernel.org
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>

spi: cadence-quadspi: Abort read if dummy cycles required are too many

[ Upstream commit ceeda328edeeeeac7579e9dbf0610785a3b83d39 ]

The controller can only support up to 31 dummy cycles. If the command
requires more it falls back to using 31. This command is likely to fail
because the correct number of cycles are not waited upon. Rather than
silently issuing an incorrect command, fail loudly so the caller can get
a chance to find out the command can't be supported by the controller.

Fixes: 140623410536 ("mtd: spi-nor: Add driver for Cadence Quad SPI Flash Controller")
Signed-off-by: Pratyush Yadav <p.yadav@ti.com>
Link: https://lore.kernel.org/r/20201222184425.7028-3-p.yadav@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

quota: Fix memory leak when handling corrupted quota file

[ Upstream commit a4db1072e1a3bd7a8d9c356e1902b13ac5deb8ef ]

When checking corrupted quota file we can bail out and leak allocated
info structure. Properly free info structure on error return.

Reported-by: syzbot+77779c9b52ab78154b08@syzkaller.appspotmail.com
Fixes: 11c514a99bb9 ("quota: Sanity-check quota file headers on load")
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: meson: clk-pll: fix initializing the old rate (fallback) for a PLL

[ Upstream commit 2f290b7c67adf6459a17a4c978102af35cd62e4a ]

The "rate" parameter in meson_clk_pll_set_rate() contains the new rate.
Retrieve the old rate with clk_hw_get_rate() so we don't inifinitely try
to switch from the new rate to the same rate again.

Fixes: 7a29a869434e8b ("clk: meson: Add support for Meson clock controller")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20201226121556.975418-2-martin.blumenstingl@googlemail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

capabilities: Don't allow writing ambiguous v3 file capabilities

[ Upstream commit 95ebabde382c371572297915b104e55403674e73 ]

The v3 file capabilities have a uid field that records the filesystem
uid of the root user of the user namespace the file capabilities are
valid in.

When someone is silly enough to have the same underlying uid as the
root uid of multiple nested containers a v3 filesystem capability can
be ambiguous.

In the spirit of don't do that then, forbid writing a v3 filesystem
capability if it is ambiguous.

Fixes: 8db6c34f1dbc ("Introduce v3 namespaced file capabilities")
Reviewed-by: Andrew G. Morgan <morgan@kernel.org>
Reviewed-by: Serge Hallyn <serge@hallyn.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

jffs2: fix use after free in jffs2_sum_write_data()

[ Upstream commit 19646447ad3a680d2ab08c097585b7d96a66126b ]

clang static analysis reports this problem

fs/jffs2/summary.c:794:31: warning: Use of memory after it is freed
                c->summary->sum_list_head = temp->u.next;
                                            ^~~~~~~~~~~~

In jffs2_sum_write_data(), in a loop summary data is handles a node at
a time.  When it has written out the node it is removed the summary list,
and the node is deleted.  In the corner case when a
JFFS2_FEATURE_RWCOMPAT_COPY is seen, a call is made to
jffs2_sum_disable_collecting().  jffs2_sum_disable_collecting() deletes
the whole list which conflicts with the loop's deleting the list by parts.

To preserve the old behavior of stopping the write midway, bail out of
the loop after disabling summary collection.

Fixes: 6171586a7ae5 ("[JFFS2] Correct handling of JFFS2_FEATURE_RWCOMPAT_COPY nodes.")
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>

fs/jfs: fix potential integer overflow on shift of a int

[ Upstream commit 4208c398aae4c2290864ba15c3dab7111f32bec1 ]

The left shift of int 32 bit integer constant 1 is evaluated using 32 bit
arithmetic and then assigned to a signed 64 bit integer. In the case where
l2nb is 32 or more this can lead to an overflow.  Avoid this by shifting
the value 1LL instead.

Addresses-Coverity: ("Uninitentional integer overflow")
Fixes: b40c2e665cd5 ("fs/jfs: TRIM support for JFS Filesystem")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ima: Free IMA measurement buffer after kexec syscall

[ Upstream commit f31e3386a4e92ba6eda7328cb508462956c94c64 ]

IMA allocates kernel virtual memory to carry forward the measurement
list, from the current kernel to the next kernel on kexec system call,
in ima_add_kexec_buffer() function.  This buffer is not freed before
completing the kexec system call resulting in memory leak.

Add ima_buffer field in "struct kimage" to store the virtual address
of the buffer allocated for the IMA measurement list.
Free the memory allocated for the IMA measurement list in
kimage_file_post_load_cleanup() function.

Signed-off-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com>
Suggested-by: Tyler Hicks <tyhicks@linux.microsoft.com>
Reviewed-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Reviewed-by: Tyler Hicks <tyhicks@linux.microsoft.com>
Fixes: 7b8589cc29e7 ("ima: on soft reboot, save the measurement list")
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ima: Free IMA measurement buffer on error

[ Upstream commit 6d14c6517885fa68524238787420511b87d671df ]

IMA allocates kernel virtual memory to carry forward the measurement
list, from the current kernel to the next kernel on kexec system call,
in ima_add_kexec_buffer() function.  In error code paths this memory
is not freed resulting in memory leak.

Free the memory allocated for the IMA measurement list in
the error code paths in ima_add_kexec_buffer() function.

Signed-off-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com>
Suggested-by: Tyler Hicks <tyhicks@linux.microsoft.com>
Fixes: 7b8589cc29e7 ("ima: on soft reboot, save the measurement list")
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: ecdh_helper - Ensure 'len >= secret.len' in decode_key()

[ Upstream commit a53ab94eb6850c3657392e2d2ce9b38c387a2633 ]

The length ('len' parameter) passed to crypto_ecdh_decode_key() is never
checked against the length encoded in the passed buffer ('buf'
parameter). This could lead to an out-of-bounds access when the passed
length is less than the encoded length.

Add a check to prevent that.

Fixes: 3c4b23901a0c7 ("crypto: ecdh - Add ECDH software support")
Signed-off-by: Daniele Alessandrelli <daniele.alessandrelli@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

hwrng: timeriomem - Fix cooldown period calculation

[ Upstream commit e145f5565dc48ccaf4cb50b7cfc48777bed8c100 ]

Ensure cooldown period tolerance of 1% is actually accounted for.

Fixes: ca3bff70ab32 ("hwrng: timeriomem - Improve performance...")
Signed-off-by: Jan Henrik Weinstock <jan.weinstock@rwth-aachen.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

btrfs: clarify error returns values in __load_free_space_cache

[ Upstream commit 3cc64e7ebfb0d7faaba2438334c43466955a96e8 ]

Return value in __load_free_space_cache is not properly set after
(unlikely) memory allocation failures and 0 is returned instead.
This is not a problem for the caller load_free_space_cache because only
value 1 is considered as 'cache loaded' but for clarity it's better
to set the errors accordingly.

Fixes: a67509c30079 ("Btrfs: add a io_ctl struct and helpers for dealing with the space cache")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Drivers: hv: vmbus: Avoid use-after-free in vmbus_onoffer_rescind()

[ Upstream commit e3fa4b747f085d2cda09bba0533b86fa76038635 ]

When channel->device_obj is non-NULL, vmbus_onoffer_rescind() could
invoke put_device(), that will eventually release the device and free
the channel object (cf. vmbus_device_release()).  However, a pointer
to the object is dereferenced again later to load the primary_channel.
The use-after-free can be avoided by noticing that this load/check is
redundant if device_obj is non-NULL: primary_channel must be NULL if
device_obj is non-NULL, cf. vmbus_add_channel_work().

Fixes: 54a66265d6754b ("Drivers: hv: vmbus: Fix rescind handling")
Reported-by: Juan Vazquez <juvazq@microsoft.com>
Signed-off-by: Andrea Parri (Microsoft) <parri.andrea@gmail.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20201209070827.29335-5-parri.andrea@gmail.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ata: ahci_brcm: Add back regulators management

[ Upstream commit 10340f8d7b6dd54e616339c8ccb2f397133ebea0 ]

While reworking the resources management and departing from using
ahci_platform_enable_resources() which did not allow a proper step
separation like we need, we unfortunately lost the ability to control
AHCI regulators. This broke some Broadcom STB systems that do expect
regulators to be turned on to link up with attached hard drives.

Fixes: c0cdf2ac4b5b ("ata: ahci_brcm: Fix AHCI resources management")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: uvcvideo: Accept invalid bFormatIndex and bFrameIndex values

[ Upstream commit dc9455ffae02d7b7fb51ba1e007fffcb9dc5d890 ]

The Renkforce RF AC4K 300 Action Cam 4K reports invalid bFormatIndex and
bFrameIndex values when negotiating the video probe and commit controls.
The UVC descriptors report a single supported format and frame size,
with bFormatIndex and bFrameIndex both equal to 2, but the video probe
and commit controls report bFormatIndex and bFrameIndex set to 1.

The device otherwise operates correctly, but the driver rejects the
values and fails the format try operation. Fix it by ignoring the
invalid indices, and assuming that the format and frame requested by the
driver are accepted by the device.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=210767
Fixes: 8a652a17e3c0 ("media: uvcvideo: Ensure all probed info is returned to v4l2")
Reported-by: Till Dörges <doerges@pre-sense.de>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: pxa_camera: declare variable when DEBUG is defined

[ Upstream commit 031b9212eeee365443aaef013360ea6cded7b2c4 ]

When DEBUG is defined this error occurs

drivers/media/platform/pxa_camera.c:1410:7: error:
  ‘i’ undeclared (first use in this function)
  for (i = 0; i < vb->num_planes; i++)
       ^
The variable 'i' is missing, so declare it.

Fixes: 6f28435d1c15 ("[media] media: platform: pxa_camera: trivial move of functions")
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: cx25821: Fix a bug when reallocating some dma memory

[ Upstream commit b2de3643c5024fc4fd128ba7767c7fb8b714bea7 ]

This function looks like a realloc.

However, if 'risc->cpu != NULL', the memory will be freed, but never
reallocated with the bigger 'size'.
Explicitly set 'risc->cpu' to NULL, so that the reallocation is
correctly performed a few lines below.

[hverkuil: NULL != risc->cpu -> risc->cpu]

Fixes: 5ede94c70553 ("[media] cx25821: remove bogus btcx_risc dependency)
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: qm1d1c0042: fix error return code in qm1d1c0042_init()

[ Upstream commit fcf8d018bdca0453b8d6359062e6bc1512d04c38 ]

Fix to return a negative error code from the error handling case
instead of 0 in function qm1d1c0042_init(), as done elsewhere
in this function.

Fixes: ab4d14528fdf ("[media] em28xx: add support for PLEX PX-BCUD (ISDB-S)")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Luo Meng <luomeng12@huawei.com>
Acked-by: Akihiro Tsukada <tskd08@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: lmedm04: Fix misuse of comma

[ Upstream commit 59a3e78f8cc33901fe39035c1ab681374bba95ad ]

There's a comma used instead of a semicolon that causes multiple
statements to be executed after an if instead of just the intended
single statement.

Replace the comma with a semicolon.

Fixes: 15e1ce33182d ("[media] lmedm04: Fix usb_submit_urb BOGUS urb xfer, pipe 1 != type 3 in interrupt urb")
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: bcm - Rename struct device_private to bcm_device_private

[ Upstream commit f7f2b43eaf6b4cfe54c75100709be31d5c4b52c8 ]

Renaming 'struct device_private' to 'struct bcm_device_private',
because it clashes with 'struct device_private' from
'drivers/base/base.h'.

While it's not a functional problem, it's causing two distinct
type hierarchies in BTF data. It also breaks build with options:
  CONFIG_DEBUG_INFO_BTF=y
  CONFIG_CRYPTO_DEV_BCM_SPU=y

as reported by Qais Yousef [1].

[1] https://lore.kernel.org/lkml/20201229151352.6hzmjvu3qh6p2qgg@e107158-lin/

Fixes: 9d12ba86f818 ("crypto: brcm - Add Broadcom SPU driver")
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Qais Yousef <qais.yousef@arm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: cs42l56: fix up error handling in probe

[ Upstream commit 856fe64da84c95a1d415564b981ae3908eea2a76 ]

There are two issues with this code.  The first error path forgot to set
the error code and instead returns success.  The second error path
doesn't clean up.

Fixes: 272b5edd3b8f ("ASoC: Add support for CS42L56 CODEC")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/X9NE/9nK9/TuxuL+@mwanda
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: tm6000: Fix memleak in tm6000_start_stream

[ Upstream commit 76aaf8a96771c16365b8510f1fb97738dc88026e ]

When usb_clear_halt() fails, dvb->bulk_urb->transfer_buffer
and dvb->bulk_urb should be freed just like when
usb_submit_urb() fails.

Fixes: 3169c9b26fffa ("V4L/DVB (12788): tm6000: Add initial DVB-T support")
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: media/pci: Fix memleak in empress_init

[ Upstream commit 15d0c52241ecb1c9d802506bff6f5c3f7872c0df ]

When vb2_queue_init() fails, dev->empress_dev
should be released just like other error handling
paths.

Fixes: 2ada815fc48bb ("[media] saa7134: convert to vb2")
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: vsp1: Fix an error handling path in the probe function

[ Upstream commit 7113469dafc2d545fa4fa9bc649c31dc27db492e ]

A previous 'rcar_fcp_get()' call must be undone in the error handling path,
as already done in the remove function.

Fixes: 94fcdf829793 ("[media] v4l: vsp1: Add FCP support")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: i2c: ov5670: Fix PIXEL_RATE minimum value

[ Upstream commit dc1eb7c9c290cba52937c9a224b22a400bb0ffd7 ]

The driver currently reports a single supported value for
V4L2_CID_PIXEL_RATE and initializes the control's minimum value to 0,
which is very risky, as userspace might accidentally use it as divider
when calculating the time duration of a line.

Fix this by using as minimum the only supported value when registering
the control.

Fixes: 5de35c9b8dcd1 ("media: i2c: Add Omnivision OV5670 5M sensor support")
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

MIPS: lantiq: Explicitly compare LTQ_EBU_PCC_ISTAT against 0

[ Upstream commit c6f2a9e17b9bef7677caddb1626c2402f3e9d2bd ]

When building xway_defconfig with clang:

arch/mips/lantiq/irq.c:305:48: error: use of logical '&&' with constant
operand [-Werror,-Wconstant-logical-operand]
        if ((irq == LTQ_ICU_EBU_IRQ) && (module == 0) && LTQ_EBU_PCC_ISTAT)
                                                      ^ ~~~~~~~~~~~~~~~~~
arch/mips/lantiq/irq.c:305:48: note: use '&' for a bitwise operation
        if ((irq == LTQ_ICU_EBU_IRQ) && (module == 0) && LTQ_EBU_PCC_ISTAT)
                                                      ^~
                                                      &
arch/mips/lantiq/irq.c:305:48: note: remove constant to silence this
warning
        if ((irq == LTQ_ICU_EBU_IRQ) && (module == 0) && LTQ_EBU_PCC_ISTAT)
                                                     ~^~~~~~~~~~~~~~~~~~~~
1 error generated.

Explicitly compare the constant LTQ_EBU_PCC_ISTAT against 0 to fix the
warning. Additionally, remove the unnecessary parentheses as this is a
simple conditional statement and shorthand '== 0' to '!'.

Fixes: 3645da0276ae ("OF: MIPS: lantiq: implement irq_domain support")
Link: https://github.com/ClangBuiltLinux/linux/issues/807
Reported-by: Dmitry Golovin <dima@golovin.in>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

MIPS: c-r4k: Fix section mismatch for loongson2_sc_init

[ Upstream commit c58734eee6a2151ba033c0dcb31902c89e310374 ]

When building with clang, the following section mismatch warning occurs:

WARNING: modpost: vmlinux.o(.text+0x24490): Section mismatch in
reference from the function r4k_cache_init() to the function
.init.text:loongson2_sc_init()

This should have been fixed with commit ad4fddef5f23 ("mips: fix Section
mismatch in reference") but it was missed. Remove the improper __init
annotation like that commit did.

Fixes: 078a55fc824c ("MIPS: Delete __cpuinit/__CPUINIT usage from MIPS code")
Link: https://github.com/ClangBuiltLinux/linux/issues/787
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Huacai Chen <chenhuacai@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: sun4i-ss - fix kmap usage

[ Upstream commit 9bc3dd24e7dccd50757db743a3635ad5b0497e6e ]

With the recent kmap change, some tests which were conditional on
CONFIG_DEBUG_HIGHMEM now are enabled by default.
This permit to detect a problem in sun4i-ss usage of kmap.

sun4i-ss uses two kmap via sg_miter (one for input, one for output), but
using two kmap at the same time is hard:
"the ordering has to be correct and with sg_miter that's probably hard to get
right." (quoting Tlgx)

So the easiest solution is to never have two sg_miter/kmap open at the same time.
After each use of sg_miter, I store the current index, for being able to
resume sg_miter to the right place.

Fixes: 6298e948215f ("crypto: sunxi-ss - Add Allwinner Security System crypto accelerator")
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

gma500: clean up error handling in init

[ Upstream commit 15ccc39b3aab667c6fa131206f01f31bfbccdf6a ]

The main problem with this error handling was that it didn't clean up if
i2c_add_numbered_adapter() failed.  This code is pretty old, and doesn't
match with today's checkpatch.pl standards so I took the opportunity to
tidy it up a bit.  I changed the NULL comparison, and removed the
WARNING message if kzalloc() fails and updated the label names.

Fixes: 1b082ccf5901 ("gma500: Add Oaktrail support")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/X8ikkAqZfnDO2lu6@mwanda
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/gma500: Fix error return code in psb_driver_load()

[ Upstream commit 6926872ae24452d4f2176a3ba2dee659497de2c4 ]

Fix to return a negative error code from the error handling
case instead of 0, as done elsewhere in this function.

Fixes: 5c49fd3aa0ab ("gma500: Add the core DRM files and headers")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20201130020216.1906141-1-zhangjialin11@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

fbdev: aty: SPARC64 requires FB_ATY_CT

[ Upstream commit c6c90c70db4d9a0989111d6b994d545659410f7a ]

It looks like SPARC64 requires FB_ATY_CT to build without errors,
so have FB_ATY select FB_ATY_CT if both SPARC64 and PCI are enabled
instead of using "default y if SPARC64 && PCI", which is not strong
enough to prevent build errors.

As it currently is, FB_ATY_CT can be disabled, resulting in build
errors:

ERROR: modpost: "aty_postdividers" [drivers/video/fbdev/aty/atyfb.ko] undefined!
ERROR: modpost: "aty_ld_pll_ct" [drivers/video/fbdev/aty/atyfb.ko] undefined!

Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Fixes: f7018c213502 ("video: move fbdev to drivers/video/fbdev")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: sparclinux@vger.kernel.org
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-fbdev@vger.kernel.org
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: David Airlie <airlied@linux.ie>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20201127031752.10371-1-rdunlap@infradead.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: mvneta: Remove per-cpu queue mapping for Armada 3700

[ Upstream commit cf9bf871280d9e0a8869d98c2602d29caf69dfa3 ]

According to Errata #23 "The per-CPU GbE interrupt is limited to Core
0", we can't use the per-cpu interrupt mechanism on the Armada 3700
familly.

This is correctly checked for RSS configuration, but the initial queue
mapping is still done by having the queues spread across all the CPUs in
the system, both in the init path and in the cpu_hotplug path.

Fixes: 2636ac3cc2b4 ("net: mvneta: Add network support for Armada 3700 SoC")
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: amd-xgbe: Reset link when the link never comes back

[ Upstream commit 84fe68eb67f9499309cffd97c1ba269de125ff14 ]

Normally, auto negotiation and reconnect should be automatically done by
the hardware. But there seems to be an issue where auto negotiation has
to be restarted manually. This happens because of link training and so
even though still connected to the partner the link never "comes back".
This needs an auto-negotiation restart.

Also, a change in xgbe-mdio is needed to get ethtool to recognize the
link down and get the link change message. This change is only
required in a backplane connection mode.

Fixes: abf0a1c2b26a ("amd-xgbe: Add support for SFP+ modules")
Co-developed-by: Sudheesh Mavila <sudheesh.mavila@amd.com>
Signed-off-by: Sudheesh Mavila <sudheesh.mavila@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: amd-xgbe: Reset the PHY rx data path when mailbox command timeout

[ Upstream commit 30b7edc82ec82578f4f5e6706766f0a9535617d3 ]

Sometimes mailbox commands timeout when the RX data path becomes
unresponsive. This prevents the submission of new mailbox commands to DXIO.
This patch identifies the timeout and resets the RX data path so that the
next message can be submitted properly.

Fixes: 549b32af9f7c ("amd-xgbe: Simplify mailbox interface rate change code")
Co-developed-by: Sudheesh Mavila <sudheesh.mavila@amd.com>
Signed-off-by: Sudheesh Mavila <sudheesh.mavila@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ibmvnic: skip send_request_unmap for timeout reset

[ Upstream commit 7d3a7b9ea59ddb223aec59b45fa1713c633aaed4 ]

Timeout reset will trigger the VIOS to unmap it automatically,
similarly as FAILVOER and MOBILITY events. If we unmap it
in the linux side, we will see errors like
"30000003: Error 4 in REQUEST_UNMAP_RSP".
So, don't call send_request_unmap for timeout reset.

Fixes: ed651a10875f ("ibmvnic: Updated reset handling")
Signed-off-by: Lijun Pan <ljp@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

b43: N-PHY: Fix the update of coef for the PHY revision >= 3case

[ Upstream commit 4773acf3d4b50768bf08e9e97a204819e9ea0895 ]

The documentation for the PHY update [1] states:

Loop 4 times with index i

    If PHY Revision >= 3
        Copy table[i] to coef[i]
    Otherwise
        Set coef[i] to 0

the copy of the table to coef is currently implemented the wrong way
around, table is being updated from uninitialized values in coeff.
Fix this by swapping the assignment around.

[1] https://bcm-v4.sipsolutions.net/802.11/PHY/N/RestoreCal/

Fixes: 2f258b74d13c ("b43: N-PHY: implement restoring general configuration")
Addresses-Coverity: ("Uninitialized scalar variable")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mac80211: fix potential overflow when multiplying to u32 integers

[ Upstream commit 6194f7e6473be78acdc5d03edd116944bdbb2c4e ]

The multiplication of the u32 variables tx_time and estimated_retx is
performed using a 32 bit multiplication and the result is stored in
a u64 result. This has a potential u32 overflow issue, so avoid this
by casting tx_time to a u64 to force a 64 bit multiply.

Addresses-Coverity: ("Unintentional integer overflow")
Fixes: 050ac52cbe1f ("mac80211: code for on-demand Hybrid Wireless Mesh Protocol")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20210205175352.208841-1-colin.king@canonical.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

xen/netback: fix spurious event detection for common event case

[ Upstream commit a3daf3d39132b405781be8d9ede0c449b244b64e ]

In case of a common event for rx and tx queue the event should be
regarded to be spurious if no rx and no tx requests are pending.

Unfortunately the condition for testing that is wrong causing to
decide a event being spurious if no rx OR no tx requests are
pending.

Fix that plus using local variables for rx/tx pending indicators in
order to split function calls and if condition.

Fixes: 23025393dbeb3b ("xen/netback: use lateeoi irq binding")
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Reviewed-by: Wei Liu <wl@xen.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bnxt_en: reverse order of TX disable and carrier off

[ Upstream commit 132e0b65dc2b8bfa9721bfce834191f24fd1d7ed ]

A TX queue can potentially immediately timeout after it is stopped
and the last TX timestamp on that queue was more than 5 seconds ago with
carrier still up.  Prevent these intermittent false TX timeouts
by bringing down carrier first before calling netif_tx_disable().

Fixes: c0c050c58d84 ("bnxt_en: New Broadcom ethernet driver.")
Signed-off-by: Edwin Peer <edwin.peer@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ath9k: fix data bus crash when setting nf_override via debugfs

[ Upstream commit 12c8f3d1cdd84f01ee777b756db9dddc1f1c9d17 ]

When trying to set the noise floor via debugfs, a "data bus error"
crash like the following can happen:

[   88.433133] Data bus error, epc == 80221c28, ra == 83314e60
[   88.438895] Oops[#1]:
[   88.441246] CPU: 0 PID: 7263 Comm: sh Not tainted 4.14.195 #0
[   88.447174] task: 838a1c20 task.stack: 82d5e000
[   88.451847] $ 0   : 00000000 00000030 deadc0de 83141de4
[   88.457248] $ 4   : b810a2c4 0000a2c4 83230fd4 00000000
[   88.462652] $ 8   : 0000000a 00000000 00000001 00000000
[   88.468055] $12   : 7f8ef318 00000000 00000000 77f802a0
[   88.473457] $16   : 83230080 00000002 0000001b 83230080
[   88.478861] $20   : 83a1c3f8 00841000 77f7adb0 ffffff92
[   88.484263] $24   : 00000fa4 77edd860
[   88.489665] $28   : 82d5e000 82d5fda8 00000000 83314e60
[   88.495070] Hi    : 00000000
[   88.498044] Lo    : 00000000
[   88.501040] epc   : 80221c28 ioread32+0x8/0x10
[   88.505671] ra    : 83314e60 ath9k_hw_loadnf+0x88/0x520 [ath9k_hw]
[   88.512049] Status: 1000fc03 KERNEL EXL IE
[   88.516369] Cause : 5080801c (ExcCode 07)
[   88.520508] PrId  : 00019374 (MIPS 24Kc)
[   88.524556] Modules linked in: ath9k ath9k_common pppoe ppp_async l2tp_ppp cdc_mbim batman_adv ath9k_hw ath sr9700 smsc95xx sierra_net rndis_host qmi_wwan pppox ppp_generic pl2303 nf_conntrack_ipv6 mcs7830 mac80211 kalmia iptable_nat ipt_REJECT ipt_MASQUERADE huawei_cdc_ncm ftdi_sio dm9601 cfg80211 cdc_subset cdc_ncm cdc_ether cdc_eem ax88179_178a asix xt_time xt_tcpudp xt_tcpmss xt_statistic xt_state xt_nat xt_multiport xt_mark xt_mac xt_limit xt_length xt_hl xt_ecn xt_dscp xt_conntrack xt_comment xt_TCPMSS xt_REDIRECT xt_NETMAP xt_LOG xt_HL xt_FLOWOFFLOAD xt_DSCP xt_CLASSIFY usbserial usbnet usbhid slhc rtl8150 r8152 pegasus nf_reject_ipv4 nf_nat_redirect nf_nat_masquerade_ipv4 nf_conntrack_ipv4 nf_nat_ipv4 nf_nat nf_log_ipv4 nf_flow_table_hw nf_flow_table nf_defrag_ipv6 nf_defrag_ipv4 nf_conntrack
[   88.597894]  libcrc32c kaweth iptable_mangle iptable_filter ipt_ECN ipheth ip_tables hso hid_generic crc_ccitt compat cdc_wdm cdc_acm br_netfilter hid evdev input_core nf_log_ipv6 nf_log_common ip6table_mangle ip6table_filter ip6_tables ip6t_REJECT x_tables nf_reject_ipv6 l2tp_netlink l2tp_core udp_tunnel ip6_udp_tunnel xfrm6_mode_tunnel xfrm6_mode_transport xfrm6_mode_beet ipcomp6 xfrm6_tunnel esp6 ah6 xfrm4_tunnel xfrm4_mode_tunnel xfrm4_mode_transport xfrm4_mode_beet ipcomp esp4 ah4 tunnel6 tunnel4 tun xfrm_user xfrm_ipcomp af_key xfrm_algo sha256_generic sha1_generic jitterentropy_rng drbg md5 hmac echainiv des_generic deflate zlib_inflate zlib_deflate cbc authenc crypto_acompress ehci_platform ehci_hcd gpio_button_hotplug usbcore nls_base usb_common crc16 mii aead crypto_null cryptomgr crc32c_generic
[   88.671671]  crypto_hash
[   88.674292] Process sh (pid: 7263, threadinfo=82d5e000, task=838a1c20, tls=77f81efc)
[   88.682279] Stack : 00008060 00000008 00000200 00000000 00000000 00000000 00000000 00000002
[   88.690916]         80500000 83230080 82d5fe22 00841000 77f7adb0 00000000 00000000 83156858
[   88.699553]         00000000 8352fa00 83ad62b0 835302a8 00000000 300a00f8 00000003 82d5fe38
[   88.708190]         82d5fef4 00000001 77f54dc4 77f80000 77f7adb0 c79fe901 00000000 00000000
[   88.716828]         80510000 00000002 00841000 77f54dc4 77f80000 801ce4cc 0000000b 41824292
[   88.725465]         ...
[   88.727994] Call Trace:
[   88.730532] [<80221c28>] ioread32+0x8/0x10
[   88.734765] Code: 00000000  8c820000  0000000f <03e00008> 00000000  08088708  00000000  aca40000  03e00008
[   88.744846]
[   88.746464] ---[ end trace db226b2de1b69b9e ]---
[   88.753477] Kernel panic - not syncing: Fatal exception
[   88.759981] Rebooting in 3 seconds..

The "REG_READ(ah, AR_PHY_AGC_CONTROL)" in ath9k_hw_loadnf() does not
like being called when the hardware is asleep, leading to this crash.

The easiest way to reproduce this is trying to set nf_override while
the hardware is down:

  $ ip link set down dev wlan0
  $ echo "-85" > /sys/kernel/debug/ieee80211/phy0/ath9k/nf_override

Fixing this crash by waking the hardware up before trying to set the
noise floor. Similar to what other ath9k debugfs files do.

Tested on a Lima board from 8devices, which has a QCA 4531 chipset.

Fixes: b90189759a7f ("ath9k: add noise floor override option")
Cc: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Linus Lüssing <ll@simonwunderlich.de>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210209184352.4272-1-linus.luessing@c0d3.blue
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf_lru_list: Read double-checked variable once without lock

[ Upstream commit 6df8fb83301d68ea0a0c0e1cbcc790fcc333ed12 ]

For double-checked locking in bpf_common_lru_push_free(), node->type is
read outside the critical section and then re-checked under the lock.
However, concurrent writes to node->type result in data races.

For example, the following concurrent access was observed by KCSAN:

  write to 0xffff88801521bc22 of 1 bytes by task 10038 on cpu 1:
   __bpf_lru_node_move_in        kernel/bpf/bpf_lru_list.c:91
   __local_list_flush            kernel/bpf/bpf_lru_list.c:298
   ...
  read to 0xffff88801521bc22 of 1 bytes by task 10043 on cpu 0:
   bpf_common_lru_push_free      kernel/bpf/bpf_lru_list.c:507
   bpf_lru_push_free             kernel/bpf/bpf_lru_list.c:555
   ...

Fix the data races where node->type is read outside the critical section
(for double-checked locking) by marking the access with READ_ONCE() as
well as ensuring the variable is only accessed once.

Fixes: 3a08c2fd7634 ("bpf: LRU List")
Reported-by: syzbot+3536db46dfa58c573458@syzkaller.appspotmail.com
Reported-by: syzbot+516acdb03d3e27d91bcd@syzkaller.appspotmail.com
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20210209112701.3341724-1-elver@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: s3c: fix fiq for clang IAS

[ Upstream commit 7f9942c61fa60eda7cc8e42f04bd25b7d175876e ]

Building with the clang integrated assembler produces a couple of
errors for the s3c24xx fiq support:

  arch/arm/mach-s3c/irq-s3c24xx-fiq.S:52:2: error: instruction 'subne' can not set flags, but 's' suffix specified
    subnes pc, lr, #4 @@ return, still have work to do

  arch/arm/mach-s3c/irq-s3c24xx-fiq.S:64:1: error: invalid symbol redefinition
    s3c24xx_spi_fiq_txrx:

There are apparently two problems: one with extraneous or duplicate
labels, and one with old-style opcode mnemonics. Stefan Agner has
previously fixed other problems like this, but missed this particular
file.

Fixes: bec0806cfec6 ("spi_s3c24xx: add FIQ pseudo-DMA support")
Cc: Stefan Agner <stefan@agner.ch>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20210204162416.3030114-1-arnd@kernel.org
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: msm8916: Fix reserved and rfsa nodes unit address

[ Upstream commit d5ae2528b0b56cf054b27d48b0cb85330900082f ]

Fix `reserved` and `rfsa` unit address according to their reg address

Fixes: 7258e10e6a0b ("ARM: dts: msm8916: Update reserved-memory")
Signed-off-by: Vincent Knecht <vincent.knecht@mailoo.org>
Link: https://lore.kernel.org/r/20210123104417.518105-1-vincent.knecht@mailoo.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

staging: rtl8723bs: wifi_regd.c: Fix incorrect number of regulatory rules

[ Upstream commit 61834c967a929f6b4b7fcb91f43fa225cc29aa19 ]

The custom regulatory ruleset in the rtl8723bs driver lists an incorrect
number of rules: one too many. This results in an out-of-bounds access,
as detected by KASAN. This was possible thanks to the newly added support
for KASAN on ARMv7.

Fix this by filling in the correct number of rules given.

KASAN report:

==================================================================
BUG: KASAN: global-out-of-bounds in cfg80211_does_bw_fit_range+0x14/0x4c [cfg80211]
Read of size 4 at addr bf20c254 by task ip/971

CPU: 2 PID: 971 Comm: ip Tainted: G         C        5.11.0-rc2-00020-gf7fe528a7ebe #1
Hardware name: Allwinner sun8i Family
[<c0113338>] (unwind_backtrace) from [<c010e8a4>] (show_stack+0x10/0x14)
[<c010e8a4>] (show_stack) from [<c0e0f868>] (dump_stack+0x9c/0xb4)
[<c0e0f868>] (dump_stack) from [<c0388284>] (print_address_description.constprop.2+0x1dc/0x2dc)
[<c0388284>] (print_address_description.constprop.2) from [<c03885cc>] (kasan_report+0x1a8/0x1c4)
[<c03885cc>] (kasan_report) from [<bf00a354>] (cfg80211_does_bw_fit_range+0x14/0x4c [cfg80211])
[<bf00a354>] (cfg80211_does_bw_fit_range [cfg80211]) from [<bf00b41c>] (freq_reg_info_regd.part.6+0x108/0x124 [>
[<bf00b41c>] (freq_reg_info_regd.part.6 [cfg80211]) from [<bf00df00>] (handle_channel_custom.constprop.12+0x48/>
[<bf00df00>] (handle_channel_custom.constprop.12 [cfg80211]) from [<bf00e150>] (wiphy_apply_custom_regulatory+0>
[<bf00e150>] (wiphy_apply_custom_regulatory [cfg80211]) from [<bf1fb9e8>] (rtw_regd_init+0x60/0x70 [r8723bs])
[<bf1fb9e8>] (rtw_regd_init [r8723bs]) from [<bf1ee5a8>] (rtw_cfg80211_init_wiphy+0x164/0x1e8 [r8723bs])
[<bf1ee5a8>] (rtw_cfg80211_init_wiphy [r8723bs]) from [<bf1f8d50>] (_netdev_open+0xe4/0x28c [r8723bs])
[<bf1f8d50>] (_netdev_open [r8723bs]) from [<bf1f8f58>] (netdev_open+0x60/0x88 [r8723bs])
[<bf1f8f58>] (netdev_open [r8723bs]) from [<c0bb3730>] (__dev_open+0x178/0x220)
[<c0bb3730>] (__dev_open) from [<c0bb3cdc>] (__dev_change_flags+0x258/0x2c4)
[<c0bb3cdc>] (__dev_change_flags) from [<c0bb3d88>] (dev_change_flags+0x40/0x80)
[<c0bb3d88>] (dev_change_flags) from [<c0bc86fc>] (do_setlink+0x538/0x1160)
[<c0bc86fc>] (do_setlink) from [<c0bcf9e8>] (__rtnl_newlink+0x65c/0xad8)
[<c0bcf9e8>] (__rtnl_newlink) from [<c0bcfeb0>] (rtnl_newlink+0x4c/0x6c)
[<c0bcfeb0>] (rtnl_newlink) from [<c0bc67c8>] (rtnetlink_rcv_msg+0x1f8/0x454)
[<c0bc67c8>] (rtnetlink_rcv_msg) from [<c0c330e4>] (netlink_rcv_skb+0xc4/0x1e0)
[<c0c330e4>] (netlink_rcv_skb) from [<c0c32478>] (netlink_unicast+0x2c8/0x3c4)
[<c0c32478>] (netlink_unicast) from [<c0c32894>] (netlink_sendmsg+0x320/0x5f0)
[<c0c32894>] (netlink_sendmsg) from [<c0b75eb0>] (____sys_sendmsg+0x320/0x3e0)
[<c0b75eb0>] (____sys_sendmsg) from [<c0b78394>] (___sys_sendmsg+0xe8/0x12c)
[<c0b78394>] (___sys_sendmsg) from [<c0b78a50>] (__sys_sendmsg+0xc0/0x120)
[<c0b78a50>] (__sys_sendmsg) from [<c0100060>] (ret_fast_syscall+0x0/0x58)
Exception stack(0xc5693fa8 to 0xc5693ff0)
3fa0:                   00000074 c7a39800 00000003 b6cee648 00000000 00000000
3fc0: 00000074 c7a39800 00000001 00000128 78d18349 00000000 b6ceeda0 004f7cb0
3fe0: 00000128 b6cee5e8 aeca151f aec1d746

The buggy address belongs to the variable:
 rtw_drv_halt+0xf908/0x6b4 [r8723bs]

Memory state around the buggy address:
 bf20c100: 00 00 00 00 00 00 00 00 00 00 04 f9 f9 f9 f9 f9
 bf20c180: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>bf20c200: 00 00 00 00 00 00 00 00 00 00 04 f9 f9 f9 f9 f9
                                         ^
 bf20c280: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 bf20c300: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
==================================================================

Fixes: 554c0a3abf21 ("staging: Add rtl8723bs sdio wifi driver")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Link: https://lore.kernel.org/r/20210108141401.31741-1-wens@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: dwc2: Make "trimming xfer length" a debug message

[ Upstream commit 1a9e38cabd80356ffb98c2c88fec528ea9644fd5 ]

With some USB network adapters, such as DM96xx, the following message
is seen for each maximum size receive packet.

dwc2 ff540000.usb: dwc2_update_urb_state(): trimming xfer length

This happens because the packet size requested by the driver is 1522
bytes, wMaxPacketSize is 64, the dwc2 driver configures the chip to
receive 24*64 = 1536 bytes, and the chip does indeed send more than
1522 bytes of data. Since the event does not indicate an error condition,
the message is just noise. Demote it to debug level.

Fixes: 7359d482eb4d3 ("staging: HCD files for the DWC2 driver")
Tested-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Link: https://lore.kernel.org/r/20210113112052.17063-4-nsaenzjulienne@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: dwc2: Abort transaction after errors with unknown reason

[ Upstream commit f74b68c61cbc4b2245022fcce038509333d63f6f ]

In some situations, the following error messages are reported.

dwc2 ff540000.usb: dwc2_hc_chhltd_intr_dma: Channel 1 - ChHltd set, but reason is unknown
dwc2 ff540000.usb: hcint 0x00000002, intsts 0x04000021

This is sometimes followed by:

dwc2 ff540000.usb: dwc2_update_urb_state_abn(): trimming xfer length

and then:

WARNING: CPU: 0 PID: 0 at kernel/v4.19/drivers/usb/dwc2/hcd.c:2913
dwc2_assign_and_init_hc+0x98c/0x990

The warning suggests that an odd buffer address is to be used for DMA.

After an error is observed, the receive buffer may be full
(urb->actual_length >= urb->length). However, the urb is still left in
the queue unless three errors were observed in a row. When it is queued
again, the dwc2 hcd code translates this into a 1-block transfer.
If urb->actual_length (ie the total expected receive length) is not
DMA-aligned, the buffer pointer programmed into the chip will be
unaligned. This results in the observed warning.

To solve the problem, abort input transactions after an error with
unknown cause if the entire packet was already received. This may be
a bit drastic, but we don't really know why the transfer was aborted
even though the entire packet was received. Aborting the transfer in
this situation is less risky than accepting a potentially corrupted
packet.

With this patch in place, the 'ChHltd set' and 'trimming xfer length'
messages are still observed, but there are no more transfer attempts
with odd buffer addresses.

Fixes: 151d0cbdbe860 ("usb: dwc2: make the scheduler handle excessive NAKs better")
Cc: Boris ARZUR <boris@konbu.org>
Cc: Douglas Anderson <dianders@chromium.org>
Tested-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Link: https://lore.kernel.org/r/20210113112052.17063-3-nsaenzjulienne@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: dwc2: Do not update data length if it is 0 on inbound transfers

[ Upstream commit 415fa1c7305dedbb345e2cc8ac91769bc1c83f1a ]

The DWC2 documentation states that transfers with zero data length should
set the number of packets to 1 and the transfer length to 0. This is not
currently the case for inbound transfers: the transfer length is set to
the maximum packet length. This can have adverse effects if the chip
actually does transfer data as it is programmed to do. Follow chip
documentation and keep the transfer length set to 0 in that situation.

Fixes: 56f5b1cff22a1 ("staging: Core files for the DWC2 driver")
Tested-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Link: https://lore.kernel.org/r/20210113112052.17063-2-nsaenzjulienne@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: Configure missing thermal interrupt for 4430

[ Upstream commit 44f416879a442600b006ef7dec3a6dc98bcf59c6 ]

We have gpio_86 wired internally to the bandgap thermal shutdown
interrupt on 4430 like we have it on 4460 according to the TRM.
This can be found easily by searching for TSHUT.

For some reason the thermal shutdown interrupt was never added
for 4430, let's add it. I believe this is needed for the thermal
shutdown interrupt handler ti_bandgap_tshut_irq_handler() to call
orderly_poweroff().

Fixes: aa9bb4bb8878 ("arm: dts: add omap4430 thermal data")
Cc: Carl Philipp Klemm <philipp@uvos.xyz>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Eduardo Valentin <edubezval@gmail.com>
Cc: Merlijn Wajer <merlijn@wizzup.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Cc: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Bluetooth: Put HCI device if inquiry procedure interrupts

[ Upstream commit 28a758c861ff290e39d4f1ee0aa5df0f0b9a45ee ]

Jump to the label done to decrement the reference count of HCI device
hdev on path that the Inquiry procedure is interrupted.

Fixes: 3e13fa1e1fab ("Bluetooth: Fix hci_inquiry ioctl usage")
Signed-off-by: Pan Bian <bianpan2016@163.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Bluetooth: drop HCI device reference before return

[ Upstream commit 5a3ef03afe7e12982dc3b978f4c5077c907f7501 ]

Call hci_dev_put() to decrement reference count of HCI device hdev if
fails to duplicate memory.

Fixes: 0b26ab9dce74 ("Bluetooth: AMP: Handle Accept phylink command status evt")
Signed-off-by: Pan Bian <bianpan2016@163.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: gadget: u_audio: Free requests only after callback

[ Upstream commit 7de8681be2cde9f6953d3be1fa6ce05f9fe6e637 ]

As per the kernel doc for usb_ep_dequeue(), it states that "this
routine is asynchronous, that is, it may return before the completion
routine runs". And indeed since v5.0 the dwc3 gadget driver updated
its behavior to place dequeued requests on to a cancelled list to be
given back later after the endpoint is stopped.

The free_ep() was incorrectly assuming that a request was ready to
be freed after calling dequeue which results in a use-after-free
in dwc3 when it traverses its cancelled list. Fix this by moving
the usb_ep_free_request() call to the callback itself in case the
ep is disabled.

Fixes: eb9fecb9e69b0 ("usb: gadget: f_uac2: split out audio core")
Reported-and-tested-by: Ferry Toth <fntoth@gmail.com>
Reviewed-and-tested-by: Peter Chen <peter.chen@nxp.com>
Acked-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Jack Pham <jackp@codeaurora.org>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20210118084642.322510-2-jbrunet@baylibre.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cpufreq: brcmstb-avs-cpufreq: Fix resource leaks in ->remove()

[ Upstream commit 3657f729b6fb5f2c0bf693742de2dcd49c572aa1 ]

If 'cpufreq_unregister_driver()' fails, just WARN and continue, so that
other resources are freed.

Fixes: de322e085995 ("cpufreq: brcmstb-avs-cpufreq: AVS CPUfreq driver for Broadcom STB SoCs")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
[ Viresh: Updated Subject ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: exynos: correct PMIC interrupt trigger level on Espresso

[ Upstream commit 1fea2eb2f5bbd3fbbe2513d2386b5f6e6db17fd7 ]

The Samsung PMIC datasheets describe the interrupt line as active low
with a requirement of acknowledge from the CPU.  Without specifying the
interrupt type in Devicetree, kernel might apply some fixed
configuration, not necessarily working for this hardware.

Fixes: 9589f7721e16 ("arm64: dts: Add S2MPS15 PMIC node on exynos7-espresso")
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20201210212903.216728-8-krzk@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: exynos: correct PMIC interrupt trigger level on TM2

[ Upstream commit e98e2367dfb4b6d7a80c8ce795c644124eff5f36 ]

The Samsung PMIC datasheets describe the interrupt line as active low
with a requirement of acknowledge from the CPU.  Without specifying the
interrupt type in Devicetree, kernel might apply some fixed
configuration, not necessarily working for this hardware.

Fixes: 01e5d2352152 ("arm64: dts: exynos: Add dts file for Exynos5433-based TM2 board")
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20201210212903.216728-7-krzk@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: exynos: correct PMIC interrupt trigger level on Arndale Octa

[ Upstream commit 1ac8893c4fa3d4a34915dc5cdab568a39db5086c ]

The Samsung PMIC datasheets describe the interrupt line as active low
with a requirement of acknowledge from the CPU.  The falling edge
interrupt will mostly work but it's not correct.

Fixes: 1fed2252713e ("ARM: dts: fix pinctrl for s2mps11-irq on exynos5420-arndale-octa")
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20201210212903.216728-5-krzk@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: exynos: correct PMIC interrupt trigger level on Spring

[ Upstream commit 77e6a5467cb8657cf8b5e610a30a4c502085e4f9 ]

The Samsung PMIC datasheets describe the interrupt line as active low
with a requirement of acknowledge from the CPU.  Without specifying the
interrupt type in Devicetree, kernel might apply some fixed
configuration, not necessarily working for this hardware.

Fixes: 53dd4138bb0a ("ARM: dts: Add exynos5250-spring device tree")
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20201210212903.216728-4-krzk@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: exynos: correct PMIC interrupt trigger level on Rinato

[ Upstream commit 437ae60947716bb479e2f32466f49445c0509b1e ]

The Samsung PMIC datasheets describe the interrupt line as active low
with a requirement of acknowledge from the CPU.  Without specifying the
interrupt type in Devicetree, kernel might apply some fixed
configuration, not necessarily working for this hardware.

Fixes: faaf348ef468 ("ARM: dts: Add board dts file for exynos3250-rinato")
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20201210212903.216728-3-krzk@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: exynos: correct PMIC interrupt trigger level on Monk

[ Upstream commit 8528cda2b7c667e9cd173aef1a677c71b7d5a096 ]

The Samsung PMIC datasheets describe the interrupt line as active low
with a requirement of acknowledge from the CPU.  Without specifying the
interrupt type in Devicetree, kernel might apply some fixed
configuration, not necessarily working for this hardware.

Fixes: e0cefb3f79d3 ("ARM: dts: add board dts file for Exynos3250-based Monk board")
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20201210212903.216728-2-krzk@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

Bluetooth: Fix initializing response id after clearing struct

[ Upstream commit a5687c644015a097304a2e47476c0ecab2065734 ]

Looks like this was missed when patching the source to clear the structures
throughout, causing this one instance to clear the struct after the response
id is assigned.

Fixes: eddb7732119d ("Bluetooth: A2MP: Fix not initializing all members")
Signed-off-by: Christopher William Snowhill <chris@kode54.net>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Bluetooth: btqcomsmd: Fix a resource leak in error handling paths in the probe function

[ Upstream commit 9a39a927be01d89e53f04304ab99a8761e08910d ]

Some resource should be released in the error handling path of the probe
function, as already done in the remove function.

The remove function was fixed in commit 5052de8deff5 ("soc: qcom: smd:
Transition client drivers from smd to rpmsg")

Fixes: 1511cc750c3d ("Bluetooth: Introduce Qualcomm WCNSS SMD based HCI driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

random: fix the RNDRESEEDCRNG ioctl

commit 11a0b5e0ec8c13bef06f7414f9e914506140d5cb upstream.

The RNDRESEEDCRNG ioctl reseeds the primary_crng from itself, which
doesn't make sense.  Reseed it from the input_pool instead.

Fixes: d848e5f8e1eb ("random: add new ioctl RNDRESEEDCRNG")
Cc: stable@vger.kernel.org
Cc: linux-crypto@vger.kernel.org
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Jann Horn <jannh@google.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jann Horn <jannh@google.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20210112192818.69921-1-ebiggers@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

MIPS: vmlinux.lds.S: add missing PAGE_ALIGNED_DATA() section

commit 8ac7c87acdcac156670f9920c8acbd84308ff4b1 upstream.

MIPS uses its own declaration of rwdata, and thus it should be kept
in sync with the asm-generic one. Currently PAGE_ALIGNED_DATA() is
missing from the linker script, which emits the following ld
warnings:

mips-alpine-linux-musl-ld: warning: orphan section
`.data..page_aligned' from `arch/mips/kernel/vdso.o' being placed
in section `.data..page_aligned'
mips-alpine-linux-musl-ld: warning: orphan section
`.data..page_aligned' from `arch/mips/vdso/vdso-image.o' being placed
in section `.data..page_aligned'

Add the necessary declaration, so the mentioned structures will be
placed in vmlinux as intended:

ffffffff80630580 D __end_once
ffffffff80630580 D __start___dyndbg
ffffffff80630580 D __start_once
ffffffff80630580 D __stop___dyndbg
ffffffff80634000 d mips_vdso_data
ffffffff80638000 d vdso_data
ffffffff80638580 D _gp
ffffffff8063c000 T __init_begin
ffffffff8063c000 D _edata
ffffffff8063c000 T _sinittext

->

ffffffff805a4000 D __end_init_task
ffffffff805a4000 D __nosave_begin
ffffffff805a4000 D __nosave_end
ffffffff805a4000 d mips_vdso_data
ffffffff805a8000 d vdso_data
ffffffff805ac000 D mmlist_lock
ffffffff805ac080 D tasklist_lock

Fixes: ebb5e78cc634 ("MIPS: Initial implementation of a VDSO")
Signed-off-by: Alexander Lobakin <alobakin@pm.me>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Cc: stable@vger.kernel.org # 4.4+
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kdb: Make memory allocations more robust

commit 93f7a6d818deef69d0ba652d46bae6fbabbf365c upstream.

Currently kdb uses in_interrupt() to determine whether its library
code has been called from the kgdb trap handler or from a saner calling
context such as driver init. This approach is broken because
in_interrupt() alone isn't able to determine kgdb trap handler entry from
normal task context. This can happen during normal use of basic features
such as breakpoints and can also be trivially reproduced using:
echo g > /proc/sysrq-trigger

We can improve this by adding check for in_dbg_master() instead which
explicitly determines if we are running in debugger context.

Cc: stable@vger.kernel.org
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Link: https://lore.kernel.org/r/1611313556-4004-1-git-send-email-sumit.garg@linaro.org
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

vmlinux.lds.h: add DWARF v5 sections

commit 3c4fa46b30c551b1df2fb1574a684f68bc22067c upstream.

We expect toolchains to produce these new debug info sections as part of
DWARF v5. Add explicit placements to prevent the linker warnings from
--orphan-section=warn.

Compilers may produce such sections with explicit -gdwarf-5, or based on
the implicit default version of DWARF when -g is used via DEBUG_INFO.
This implicit default changes over time, and has changed to DWARF v5
with GCC 11.

.debug_sup was mentioned in review, but without compilers producing it
today, let's wait to add it until it becomes necessary.

Cc: stable@vger.kernel.org
Link: https://bugzilla.redhat.com/show_bug.cgi?id=1922707
Reported-by: Chris Murphy <lists@colorremedies.com>
Suggested-by: Fangrui Song <maskray@google.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Mark Wielaard <mark@klomp.org>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>