crypto: user - fix memory leak in crypto_reportstat

commit c03b04dcdba1da39903e23cc4d072abf8f68f2dd upstream.

In crypto_reportstat, a new skb is created by nlmsg_new(). This skb is
leaked if crypto_reportstat_alg() fails. Required release for skb is
added.

Fixes: cac5818c25d0 ("crypto: user - Implement a generic crypto statistics")
Cc: <stable@vger.kernel.org>
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto: user - fix memory leak in crypto_report

commit ffdde5932042600c6807d46c1550b28b0db6a3bc upstream.

In crypto_report, a new skb is created via nlmsg_new(). This skb should
be released if crypto_report_alg() fails.

Fixes: a38f7907b926 ("crypto: Add userspace configuration API")
Cc: <stable@vger.kernel.org>
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto: ecdh - fix big endian bug in ECC library

commit f398243e9fd6a3a059c1ea7b380c40628dbf0c61 upstream.

The elliptic curve arithmetic library used by the EC-DH KPP implementation
assumes big endian byte order, and unconditionally reverses the byte
and word order of multi-limb quantities. On big endian systems, the byte
reordering is not necessary, while the word ordering needs to be retained.

So replace the __swab64() invocation with a call to be64_to_cpu() which
should do the right thing for both little and big endian builds.

Fixes: 3c4b23901a0c ("crypto: ecdh - Add ECDH software support")
Cc: <stable@vger.kernel.org> # v4.9+
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto: ccp - fix uninitialized list head

commit 691505a803a7f223b2af621848d581259c61f77d upstream.

A NULL-pointer dereference was reported in fedora bz#1762199 while
reshaping a raid6 array after adding a fifth drive to an existing
array.

[   47.343549] md/raid:md0: raid level 6 active with 3 out of 5 devices, algorithm 2
[   47.804017] md0: detected capacity change from 0 to 7885289422848
[   47.822083] Unable to handle kernel read from unreadable memory at virtual address 0000000000000000
...
[   47.940477] CPU: 1 PID: 14210 Comm: md0_raid6 Tainted: G        W         5.2.18-200.fc30.aarch64 #1
[   47.949594] Hardware name: AMD Overdrive/Supercharger/To be filled by O.E.M., BIOS ROD1002C 04/08/2016
[   47.958886] pstate: 00400085 (nzcv daIf +PAN -UAO)
[   47.963668] pc : __list_del_entry_valid+0x2c/0xa8
[   47.968366] lr : ccp_tx_submit+0x84/0x168 [ccp]
[   47.972882] sp : ffff00001369b970
[   47.976184] x29: ffff00001369b970 x28: ffff00001369bdb8
[   47.981483] x27: 00000000ffffffff x26: ffff8003b758af70
[   47.986782] x25: ffff8003b758b2d8 x24: ffff8003e6245818
[   47.992080] x23: 0000000000000000 x22: ffff8003e62450c0
[   47.997379] x21: ffff8003dfd6add8 x20: 0000000000000003
[   48.002678] x19: ffff8003e6245100 x18: 0000000000000000
[   48.007976] x17: 0000000000000000 x16: 0000000000000000
[   48.013274] x15: 0000000000000000 x14: 0000000000000000
[   48.018572] x13: ffff7e000ef83a00 x12: 0000000000000001
[   48.023870] x11: ffff000010eff998 x10: 00000000000019a0
[   48.029169] x9 : 0000000000000000 x8 : ffff8003e6245180
[   48.034467] x7 : 0000000000000000 x6 : 000000000000003f
[   48.039766] x5 : 0000000000000040 x4 : ffff8003e0145080
[   48.045064] x3 : dead000000000200 x2 : 0000000000000000
[   48.050362] x1 : 0000000000000000 x0 : ffff8003e62450c0
[   48.055660] Call trace:
[   48.058095]  __list_del_entry_valid+0x2c/0xa8
[   48.062442]  ccp_tx_submit+0x84/0x168 [ccp]
[   48.066615]  async_tx_submit+0x224/0x368 [async_tx]
[   48.071480]  async_trigger_callback+0x68/0xfc [async_tx]
[   48.076784]  ops_run_biofill+0x178/0x1e8 [raid456]
[   48.081566]  raid_run_ops+0x248/0x818 [raid456]
[   48.086086]  handle_stripe+0x864/0x1208 [raid456]
[   48.090781]  handle_active_stripes.isra.0+0xb0/0x278 [raid456]
[   48.096604]  raid5d+0x378/0x618 [raid456]
[   48.100602]  md_thread+0xa0/0x150
[   48.103905]  kthread+0x104/0x130
[   48.107122]  ret_from_fork+0x10/0x18
[   48.110686] Code: d2804003 f2fbd5a3 eb03003f 54000320 (f9400021)
[   48.116766] ---[ end trace 23f390a527f7ad77 ]---

ccp_tx_submit is passed a dma_async_tx_descriptor which is contained in
a ccp_dma_desc and adds it to a ccp channel's pending list:

list_del(&desc->entry);
list_add_tail(&desc->entry, &chan->pending);

The problem is that desc->entry may be uninitialized in the
async_trigger_callback path where the descriptor was gotten
from ccp_prep_dma_interrupt which got it from ccp_alloc_dma_desc
which doesn't initialize the desc->entry list head. So, just
initialize the list head to avoid the problem.

Cc: <stable@vger.kernel.org>
Reported-by: Sahaj Sarup <sahajsarup@gmail.com>
Signed-off-by: Mark Salter <msalter@redhat.com>
Acked-by: Gary R Hook <gary.hook@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto: geode-aes - switch to skcipher for cbc(aes) fallback

commit 504582e8e40b90b8f8c58783e2d1e4f6a2b71a3a upstream.

Commit 79c65d179a40e145 ("crypto: cbc - Convert to skcipher") updated
the generic CBC template wrapper from a blkcipher to a skcipher algo,
to get away from the deprecated blkcipher interface. However, as a side
effect, drivers that instantiate CBC transforms using the blkcipher as
a fallback no longer work, since skciphers can wrap blkciphers but not
the other way around. This broke the geode-aes driver.

So let's fix it by moving to the sync skcipher interface when allocating
the fallback. At the same time, align with the generic API for ECB and
CBC by rejecting inputs that are not a multiple of the AES block size.

Fixes: 79c65d179a40e145 ("crypto: cbc - Convert to skcipher")
Cc: <stable@vger.kernel.org> # v4.20+ ONLY
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Florian Bezdeka <florian@bezdeka.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto: af_alg - cast ki_complete ternary op to int

commit 64e7f852c47ce99f6c324c46d6a299a5a7ebead9 upstream.

when libkcapi test is executed  using HW accelerator, cipher operation
return -74.Since af_alg_async_cb->ki_complete treat err as unsigned int,
libkcapi receive 429467222 even though it expect -ve value.

Hence its required to cast resultlen to int so that proper
error is returned to libkcapi.

AEAD one shot non-aligned test 2(libkcapi test)
./../bin/kcapi   -x 10   -c "gcm(aes)" -i 7815d4b06ae50c9c56e87bd7
-k ea38ac0c9b9998c80e28fb496a2b88d9 -a
"853f98a750098bec1aa7497e979e78098155c877879556bb51ddeb6374cbaefc"
-t "c4ce58985b7203094be1d134c1b8ab0b" -q
"b03692f86d1b8b39baf2abb255197c98"

Fixes: d887c52d6ae4 ("crypto: algif_aead - overhaul memory management")
Cc: <stable@vger.kernel.org>
Signed-off-by: Ayush Sawal <ayush.sawal@chelsio.com>
Signed-off-by: Atul Gupta <atul.gupta@chelsio.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Ayush Sawal <ayush.sawal@chelsio.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto: atmel-aes - Fix IV handling when req->nbytes < ivsize

commit 86ef1dfcb561473fbf5e199d58d18c55554d78be upstream.

commit 394a9e044702 ("crypto: cfb - add missing 'chunksize' property")
adds a test vector where the input length is smaller than the IV length
(the second test vector). This revealed a NULL pointer dereference in
the atmel-aes driver, that is caused by passing an incorrect offset in
scatterwalk_map_and_copy() when atmel_aes_complete() is called.

Do not save the IV in req->info of ablkcipher_request (or equivalently
req->iv of skcipher_request) when req->nbytes < ivsize, because the IV
will not be further used.

While touching the code, modify the type of ivsize from int to
unsigned int, to comply with the return type of
crypto_ablkcipher_ivsize().

Fixes: 91308019ecb4 ("crypto: atmel-aes - properly set IV after {en,de}crypt")
Cc: <stable@vger.kernel.org>
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto: crypto4xx - fix double-free in crypto4xx_destroy_sdr

commit 746c908c4d72e49068ab216c3926d2720d71a90d upstream.

This patch fixes a crash that can happen during probe
when the available dma memory is not enough (this can
happen if the crypto4xx is built as a module).

The descriptor window mapping would end up being free'd
twice, once in crypto4xx_build_pdr() and the second time
in crypto4xx_destroy_sdr().

Fixes: 5d59ad6eea82 ("crypto: crypto4xx - fix crypto4xx_build_pdr, crypto4xx_build_sdr leak")
Cc: <stable@vger.kernel.org>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: x86: Grab KVM's srcu lock when setting nested state

commit ad5996d9a0e8019c3ae5151e687939369acfe044 upstream.

Acquire kvm->srcu for the duration of ->set_nested_state() to fix a bug
where nVMX derefences ->memslots without holding ->srcu or ->slots_lock.

The other half of nested migration, ->get_nested_state(), does not need
to acquire ->srcu as it is a purely a dump of internal KVM (and CPU)
state to userspace.

Detected as an RCU lockdep splat that is 100% reproducible by running
KVM's state_test selftest with CONFIG_PROVE_LOCKING=y.  Note that the
failing function, kvm_is_visible_gfn(), is only checking the validity of
a gfn, it's not actually accessing guest memory (which is more or less
unsupported during vmx_set_nested_state() due to incorrect MMU state),
i.e. vmx_set_nested_state() itself isn't fundamentally broken.  In any
case, setting nested state isn't a fast path so there's no reason to go
out of our way to avoid taking ->srcu.

  =============================
  WARNING: suspicious RCU usage
  5.4.0-rc7+ #94 Not tainted
  -----------------------------
  include/linux/kvm_host.h:626 suspicious rcu_dereference_check() usage!

               other info that might help us debug this:

  rcu_scheduler_active = 2, debug_locks = 1
  1 lock held by evmcs_test/10939:
   #0: ffff88826ffcb800 (&vcpu->mutex){+.+.}, at: kvm_vcpu_ioctl+0x85/0x630 [kvm]

  stack backtrace:
  CPU: 1 PID: 10939 Comm: evmcs_test Not tainted 5.4.0-rc7+ #94
  Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
  Call Trace:
   dump_stack+0x68/0x9b
   kvm_is_visible_gfn+0x179/0x180 [kvm]
   mmu_check_root+0x11/0x30 [kvm]
   fast_cr3_switch+0x40/0x120 [kvm]
   kvm_mmu_new_cr3+0x34/0x60 [kvm]
   nested_vmx_load_cr3+0xbd/0x1f0 [kvm_intel]
   nested_vmx_enter_non_root_mode+0xab8/0x1d60 [kvm_intel]
   vmx_set_nested_state+0x256/0x340 [kvm_intel]
   kvm_arch_vcpu_ioctl+0x491/0x11a0 [kvm]
   kvm_vcpu_ioctl+0xde/0x630 [kvm]
   do_vfs_ioctl+0xa2/0x6c0
   ksys_ioctl+0x66/0x70
   __x64_sys_ioctl+0x16/0x20
   do_syscall_64+0x54/0x200
   entry_SYSCALL_64_after_hwframe+0x49/0xbe
  RIP: 0033:0x7f59a2b95f47

Fixes: 8fcc4b5923af5 ("kvm: nVMX: Introduce KVM_CAP_NESTED_STATE")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: x86: Remove a spurious export of a static function

commit 24885d1d79e2e83d49201aeae0bc59f1402fd4f1 upstream.

A recent change inadvertently exported a static function, which results
in modpost throwing a warning.  Fix it.

Fixes: cbbaa2727aa3 ("KVM: x86: fix presentation of TSX feature in ARCH_CAPABILITIES")
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Cc: stable@vger.kernel.org
Reviewed-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: x86: fix presentation of TSX feature in ARCH_CAPABILITIES

commit cbbaa2727aa3ae9e0a844803da7cef7fd3b94f2b upstream.

KVM does not implement MSR_IA32_TSX_CTRL, so it must not be presented
to the guests.  It is also confusing to have !ARCH_CAP_TSX_CTRL_MSR &&
!RTM && ARCH_CAP_TAA_NO: lack of MSR_IA32_TSX_CTRL suggests TSX was not
hidden (it actually was), yet the value says that TSX is not vulnerable
to microarchitectural data sampling.  Fix both.

Cc: stable@vger.kernel.org
Tested-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: x86: do not modify masked bits of shared MSRs

commit de1fca5d6e0105c9d33924e1247e2f386efc3ece upstream.

"Shared MSRs" are guest MSRs that are written to the host MSRs but
keep their value until the next return to userspace.  They support
a mask, so that some bits keep the host value, but this mask is
only used to skip an unnecessary MSR write and the value written
to the MSR is always the guest MSR.

Fix this and, while at it, do not update smsr->values[slot].curr if
for whatever reason the wrmsr fails.  This should only happen due to
reserved bits, so the value written to smsr->values[slot].curr
will not match when the user-return notifier and the host value will
always be restored.  However, it is untidy and in rare cases this
can actually avoid spurious WRMSRs on return to userspace.

Cc: stable@vger.kernel.org
Reviewed-by: Jim Mattson <jmattson@google.com>
Tested-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: arm/arm64: vgic: Don't rely on the wrong pending table

commit ca185b260951d3b55108c0b95e188682d8a507b7 upstream.

It's possible that two LPIs locate in the same "byte_offset" but target
two different vcpus, where their pending status are indicated by two
different pending tables.  In such a scenario, using last_byte_offset
optimization will lead KVM relying on the wrong pending table entry.
Let us use last_ptr instead, which can be treated as a byte index into
a pending table and also, can be vcpu specific.

Fixes: 280771252c1b ("KVM: arm64: vgic-v3: KVM_DEV_ARM_VGIC_SAVE_PENDING_TABLES")
Cc: stable@vger.kernel.org
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: Eric Auger <eric.auger@redhat.com>
Link: https://lore.kernel.org/r/20191029071919.177-4-yuzenghui@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: nVMX: Always write vmcs02.GUEST_CR3 during nested VM-Enter

commit 04f11ef45810da5ae2542dd78cc353f3761bd2cb upstream.

Write the desired L2 CR3 into vmcs02.GUEST_CR3 during nested VM-Enter
instead of deferring the VMWRITE until vmx_set_cr3().  If the VMWRITE
is deferred, then KVM can consume a stale vmcs02.GUEST_CR3 when it
refreshes vmcs12->guest_cr3 during nested_vmx_vmexit() if the emulated
VM-Exit occurs without actually entering L2, e.g. if the nested run
is squashed because nested VM-Enter (from L1) is putting L2 into HLT.

Note, the above scenario can occur regardless of whether L1 is
intercepting HLT, e.g. L1 can intercept HLT and then re-enter L2 with
vmcs.GUEST_ACTIVITY_STATE=HALTED.  But practically speaking, a VMM will
likely put a guest into HALTED if and only if it's not intercepting HLT.

In an ideal world where EPT *requires* unrestricted guest (and vice
versa), VMX could handle CR3 similar to how it handles RSP and RIP,
e.g. mark CR3 dirty and conditionally load it at vmx_vcpu_run().  But
the unrestricted guest silliness complicates the dirty tracking logic
to the point that explicitly handling vmcs02.GUEST_CR3 during nested
VM-Enter is a simpler overall implementation.

Cc: stable@vger.kernel.org
Reported-and-tested-by: Reto Buerki <reet@codelabs.ch>
Tested-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Liran Alon <liran.alon@oracle.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: PPC: Book3S HV: XIVE: Set kvm->arch.xive when VPs are allocated

commit e7d71c943040c23f2fd042033d319f56e84f845b upstream.

If we cannot allocate the XIVE VPs in OPAL, the creation of a XIVE or
XICS-on-XIVE device is aborted as expected, but we leave kvm->arch.xive
set forever since the release method isn't called in this case. Any
subsequent tentative to create a XIVE or XICS-on-XIVE for this VM will
thus always fail (DoS). This is a problem for QEMU since it destroys
and re-creates these devices when the VM is reset: the VM would be
restricted to using the much slower emulated XIVE or XICS forever.

As an alternative to adding rollback, do not assign kvm->arch.xive before
making sure the XIVE VPs are allocated in OPAL.

Cc: stable@vger.kernel.org # v5.2
Fixes: 5422e95103cf ("KVM: PPC: Book3S HV: XIVE: Replace the 'destroy' method by a 'release' method")
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: PPC: Book3S HV: XIVE: Fix potential page leak on error path

commit 30486e72093ea2e594f44876b7a445c219449bce upstream.

We need to check the host page size is big enough to accomodate the
EQ. Let's do this before taking a reference on the EQ page to avoid
a potential leak if the check fails.

Cc: stable@vger.kernel.org # v5.2
Fixes: 13ce3297c576 ("KVM: PPC: Book3S HV: XIVE: Add controls for the EQ configuration")
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: PPC: Book3S HV: XIVE: Free previous EQ page when setting up a new one

commit 31a88c82b466d2f31a44e21c479f45b4732ccfd0 upstream.

The EQ page is allocated by the guest and then passed to the hypervisor
with the H_INT_SET_QUEUE_CONFIG hcall. A reference is taken on the page
before handing it over to the HW. This reference is dropped either when
the guest issues the H_INT_RESET hcall or when the KVM device is released.
But, the guest can legitimately call H_INT_SET_QUEUE_CONFIG several times,
either to reset the EQ (vCPU hot unplug) or to set a new EQ (guest reboot).
In both cases the existing EQ page reference is leaked because we simply
overwrite it in the XIVE queue structure without calling put_page().

This is especially visible when the guest memory is backed with huge pages:
start a VM up to the guest userspace, either reboot it or unplug a vCPU,
quit QEMU. The leak is observed by comparing the value of HugePages_Free in
/proc/meminfo before and after the VM is run.

Ideally we'd want the XIVE code to handle the EQ page de-allocation at the
platform level. This isn't the case right now because the various XIVE
drivers have different allocation needs. It could maybe worth introducing
hooks for this purpose instead of exposing XIVE internals to the drivers,
but this is certainly a huge work to be done later.

In the meantime, for easier backport, fix both vCPU unplug and guest reboot
leaks by introducing a wrapper around xive_native_configure_queue() that
does the necessary cleanup.

Reported-by: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com>
Cc: stable@vger.kernel.org # v5.2
Fixes: 13ce3297c576 ("KVM: PPC: Book3S HV: XIVE: Add controls for the EQ configuration")
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Greg Kurz <groug@kaod.org>
Tested-by: Lijun Pan <ljp@linux.ibm.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: dts: exynos: Revert "Remove unneeded address space mapping for soc node"

commit bed903167ae5b5532eda5d7db26de451bd232da5 upstream.

Commit ef72171b3621 ("arm64: dts: exynos: Remove unneeded address space
mapping for soc node") changed the address and size cells in root node from
2 to 1, but /memory nodes for the affected boards were not updated. This
went unnoticed on Exynos5433-based TM2(e) boards, because they use u-boot,
which updates /memory node to the correct values. On the other hand, the
mentioned commit broke boot on Exynos7-based Espresso board, which
bootloader doesn't touch /memory node at all.

This patch reverts commit ef72171b3621 ("arm64: dts: exynos: Remove
unneeded address space mapping for soc node"), so Exynos5433 and Exynos7
SoCs again matches other ARM64 platforms with 64bit mappings in root
node.

Reported-by: Alim Akhtar <alim.akhtar@samsung.com>
Fixes: ef72171b3621 ("arm64: dts: exynos: Remove unneeded address space mapping for soc node")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: <stable@vger.kernel.org> # 5.3.x: 72ddcf6aa224 arm64: dts: exynos: Move GPU under /soc node for Exynos5433
Cc: <stable@vger.kernel.org> # 5.3.x: ede87c3a2bdb arm64: dts: exynos: Move GPU under /soc node for Exynos7
Cc: <stable@vger.kernel.org> # 4.18.x
Tested-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/i810: Prevent underflow in ioctl

commit 4f69851fbaa26b155330be35ce8ac393e93e7442 upstream.

The "used" variables here come from the user in the ioctl and it can be
negative.  It could result in an out of bounds write.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191004102251.GC823@mwanda
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm: damage_helper: Fix race checking plane->state->fb

commit 354c2d310082d1c384213ba76c3757dd3cd8755d upstream.

Since the dirtyfb ioctl doesn't give us any hints as to which plane is
scanning out the fb it's marking as damaged, we need to loop through
planes to find it.

Currently we just reach into plane state and check, but that can race
with another commit changing the fb out from under us. This patch locks
the plane before checking the fb and will release the lock if the plane
is not displaying the dirty fb.

Fixes: b9fc5e01d1ce ("drm: Add helper to implement legacy dirtyfb")
Cc: Rob Clark <robdclark@gmail.com>
Cc: Deepak Rawat <drawat@vmware.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v5.0+
Reported-by: Daniel Vetter <daniel@ffwll.ch>
Reviewed-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190904202938.110207-1-sean@poorly.run
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/msm: fix memleak on release

commit a64fc11b9a520c55ca34d82e5ca32274f49b6b15 upstream.

If a process is interrupted while accessing the "gpu" debugfs file and
the drm device struct_mutex is contended, release() could return early
and fail to free related resources.

Note that the return value from release() is ignored.

Fixes: 4f776f4511c7 ("drm/msm/gpu: Convert the GPU show function to use the GPU state")
Cc: stable <stable@vger.kernel.org> # 4.18
Cc: Jordan Crouse <jcrouse@codeaurora.org>
Cc: Rob Clark <robdclark@gmail.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191010131333.23635-2-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

jbd2: Fix possible overflow in jbd2_log_space_left()

commit add3efdd78b8a0478ce423bb9d4df6bd95e8b335 upstream.

When number of free space in the journal is very low, the arithmetic in
jbd2_log_space_left() could underflow resulting in very high number of
free blocks and thus triggering assertion failure in transaction commit
code complaining there's not enough space in the journal:

J_ASSERT(journal->j_free > 1);

Properly check for the low number of free blocks.

CC: stable@vger.kernel.org
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20191105164437.32602-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kernfs: fix ino wrap-around detection

commit e23f568aa63f64cd6b355094224cc9356c0f696b upstream.

When the 32bit ino wraps around, kernfs increments the generation
number to distinguish reused ino instances.  The wrap-around detection
tests whether the allocated ino is lower than what the cursor but the
cursor is pointing to the next ino to allocate so the condition never
triggers.

Fix it by remembering the last ino and comparing against that.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes: 4a3ef68acacf ("kernfs: implement i_generation")
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: stable@vger.kernel.org # v4.14+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nfsd: restore NFSv3 ACL support

commit 7c149057d044c52ed1e1d4ee50cf412c8d0f7295 upstream.

An error in e333f3bbefe3 left the nfsd_acl_program->pg_vers array empty,
which effectively turned off the server's support for NFSv3 ACLs.

Fixes: e333f3bbefe3 "nfsd: Allow containers to set supported nfs versions"
Cc: stable@vger.kernel.org
Cc: Trond Myklebust <trondmy@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nfsd: Ensure CLONE persists data and metadata changes to the target file

commit a25e3726b32c746c0098125d4c7463bb84df72bb upstream.

The NFSv4.2 CLONE operation has implicit persistence requirements on the
target file, since there is no protocol requirement that the client issue
a separate operation to persist data.
For that reason, we should call vfs_fsync_range() on the destination file
after a successful call to vfs_clone_file_range().

Fixes: ffa0160a1039 ("nfsd: implement the NFSv4.2 CLONE operation")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: stable@vger.kernel.org # v4.5+
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

can: slcan: Fix use-after-free Read in slcan_open

commit 9ebd796e24008f33f06ebea5a5e6aceb68b51794 upstream.

Slcan_open doesn't clean-up device which registration failed from the
slcan_devs device list. On next open this list is iterated and freed
device is accessed. Fix this by calling slc_free_netdev in error path.

Driver/net/can/slcan.c is derived from slip.c. Use-after-free error was
identified in slip_open by syzboz. Same bug is in slcan.c. Here is the
trace from the Syzbot slip report:

__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x197/0x210 lib/dump_stack.c:118
print_address_description.constprop.0.cold+0xd4/0x30b mm/kasan/report.c:374
__kasan_report.cold+0x1b/0x41 mm/kasan/report.c:506
kasan_report+0x12/0x20 mm/kasan/common.c:634
__asan_report_load8_noabort+0x14/0x20 mm/kasan/generic_report.c:132
sl_sync drivers/net/slip/slip.c:725 [inline]
slip_open+0xecd/0x11b7 drivers/net/slip/slip.c:801
tty_ldisc_open.isra.0+0xa3/0x110 drivers/tty/tty_ldisc.c:469
tty_set_ldisc+0x30e/0x6b0 drivers/tty/tty_ldisc.c:596
tiocsetd drivers/tty/tty_io.c:2334 [inline]
tty_ioctl+0xe8d/0x14f0 drivers/tty/tty_io.c:2594
vfs_ioctl fs/ioctl.c:46 [inline]
file_ioctl fs/ioctl.c:509 [inline]
do_vfs_ioctl+0xdb6/0x13e0 fs/ioctl.c:696
ksys_ioctl+0xab/0xd0 fs/ioctl.c:713
__do_sys_ioctl fs/ioctl.c:720 [inline]
__se_sys_ioctl fs/ioctl.c:718 [inline]
__x64_sys_ioctl+0x73/0xb0 fs/ioctl.c:718
do_syscall_64+0xfa/0x760 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x49/0xbe

Fixes: ed50e1600b44 ("slcan: Fix memory leak in error path")
Cc: Wolfgang Grandegger <wg@grandegger.com>
Cc: Marc Kleine-Budde <mkl@pengutronix.de>
Cc: David Miller <davem@davemloft.net>
Cc: Oliver Hartkopp <socketcan@hartkopp.net>
Cc: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Jouni Hogander <jouni.hogander@unikie.com>
Cc: linux-stable <stable@vger.kernel.org> # >= v5.4
Acked-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tty: vt: keyboard: reject invalid keycodes

commit b2b2dd71e0859436d4e05b2f61f86140250ed3f8 upstream.

Do not try to handle keycodes that are too big, otherwise we risk doing
out-of-bounds writes:

BUG: KASAN: global-out-of-bounds in clear_bit include/asm-generic/bitops-instrumented.h:56 [inline]
BUG: KASAN: global-out-of-bounds in kbd_keycode drivers/tty/vt/keyboard.c:1411 [inline]
BUG: KASAN: global-out-of-bounds in kbd_event+0xe6b/0x3790 drivers/tty/vt/keyboard.c:1495
Write of size 8 at addr ffffffff89a1b2d8 by task syz-executor108/1722
...
 kbd_keycode drivers/tty/vt/keyboard.c:1411 [inline]
 kbd_event+0xe6b/0x3790 drivers/tty/vt/keyboard.c:1495
 input_to_handler+0x3b6/0x4c0 drivers/input/input.c:118
 input_pass_values.part.0+0x2e3/0x720 drivers/input/input.c:145
 input_pass_values drivers/input/input.c:949 [inline]
 input_set_keycode+0x290/0x320 drivers/input/input.c:954
 evdev_handle_set_keycode_v2+0xc4/0x120 drivers/input/evdev.c:882
 evdev_do_ioctl drivers/input/evdev.c:1150 [inline]

In this case we were dealing with a fuzzed HID device that declared over
12K buttons, and while HID layer should not be reporting to us such big
keycodes, we should also be defensive and reject invalid data ourselves as
well.

Reported-by: syzbot+19340dff067c2d3835c0@syzkaller.appspotmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191122204220.GA129459@dtor-ws
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

CIFS: Fix SMB2 oplock break processing

commit fa9c2362497fbd64788063288dc4e74daf977ebb upstream.

Even when mounting modern protocol version the server may be
configured without supporting SMB2.1 leases and the client
uses SMB2 oplock to optimize IO performance through local caching.

However there is a problem in oplock break handling that leads
to missing a break notification on the client who has a file
opened. It latter causes big latencies to other clients that
are trying to open the same file.

The problem reproduces when there are multiple shares from the
same server mounted on the client. The processing code tries to
match persistent and volatile file ids from the break notification
with an open file but it skips all share besides the first one.
Fix this by looking up in all shares belonging to the server that
issued the oplock break.

Cc: Stable <stable@vger.kernel.org>
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

CIFS: Fix NULL-pointer dereference in smb2_push_mandatory_locks

commit 6f582b273ec23332074d970a7fb25bef835df71f upstream.

Currently when the client creates a cifsFileInfo structure for
a newly opened file, it allocates a list of byte-range locks
with a pointer to the new cfile and attaches this list to the
inode's lock list. The latter happens before initializing all
other fields, e.g. cfile->tlink. Thus a partially initialized
cifsFileInfo structure becomes available to other threads that
walk through the inode's lock list. One example of such a thread
may be an oplock break worker thread that tries to push all
cached byte-range locks. This causes NULL-pointer dereference
in smb2_push_mandatory_locks() when accessing cfile->tlink:

[598428.945633] BUG: kernel NULL pointer dereference, address: 0000000000000038
...
[598428.945749] Workqueue: cifsoplockd cifs_oplock_break [cifs]
[598428.945793] RIP: 0010:smb2_push_mandatory_locks+0xd6/0x5a0 [cifs]
...
[598428.945834] Call Trace:
[598428.945870]  ? cifs_revalidate_mapping+0x45/0x90 [cifs]
[598428.945901]  cifs_oplock_break+0x13d/0x450 [cifs]
[598428.945909]  process_one_work+0x1db/0x380
[598428.945914]  worker_thread+0x4d/0x400
[598428.945921]  kthread+0x104/0x140
[598428.945925]  ? process_one_work+0x380/0x380
[598428.945931]  ? kthread_park+0x80/0x80
[598428.945937]  ret_from_fork+0x35/0x40

Fix this by reordering initialization steps of the cifsFileInfo
structure: initialize all the fields first and then add the new
byte-range lock list to the inode's lock list.

Cc: Stable <stable@vger.kernel.org>
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/PCI: Avoid AMD FCH XHCI USB PME# from D0 defect

commit 7e8ce0e2b036dbc6617184317983aea4f2c52099 upstream.

The AMD FCH USB XHCI Controller advertises support for generating PME#
while in D0.  When in D0, it does signal PME# for USB 3.0 connect events,
but not for USB 2.0 or USB 1.1 connect events, which means the controller
doesn't wake correctly for those events.

  00:10.0 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD] FCH USB XHCI Controller [1022:7914] (rev 20) (prog-if 30 [XHCI])
        Subsystem: Dell FCH USB XHCI Controller [1028:087e]
        Capabilities: [50] Power Management version 3
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)

Clear PCI_PM_CAP_PME_D0 in dev->pme_support to indicate the device will not
assert PME# from D0 so we don't rely on it.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=203673
Link: https://lore.kernel.org/r/20190902145252.32111-1-kai.heng.feng@canonical.com
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/mm/32: Sync only to VMALLOC_END in vmalloc_sync_all()

commit 9a62d20027da3164a22244d9f022c0c987261687 upstream.

The job of vmalloc_sync_all() is to help the lazy freeing of vmalloc()
ranges: before such vmap ranges are reused we make sure that they are
unmapped from every task's page tables.

This is really easy on pagetable setups where the kernel page tables
are shared between all tasks - this is the case on 32-bit kernels
with SHARED_KERNEL_PMD = 1.

But on !SHARED_KERNEL_PMD 32-bit kernels this involves iterating
over the pgd_list and clearing all pmd entries in the pgds that
are cleared in the init_mm.pgd, which is the reference pagetable
that the vmalloc() code uses.

In that context the current practice of vmalloc_sync_all() iterating
until FIX_ADDR_TOP is buggy:

        for (address = VMALLOC_START & PMD_MASK;
             address >= TASK_SIZE_MAX && address < FIXADDR_TOP;
             address += PMD_SIZE) {
                struct page *page;

Because iterating up to FIXADDR_TOP will involve a lot of non-vmalloc
address ranges:

VMALLOC -> PKMAP -> LDT -> CPU_ENTRY_AREA -> FIX_ADDR

This is mostly harmless for the FIX_ADDR and CPU_ENTRY_AREA ranges
that don't clear their pmds, but it's lethal for the LDT range,
which relies on having different mappings in different processes,
and 'synchronizing' them in the vmalloc sense corrupts those
pagetable entries (clearing them).

This got particularly prominent with PTI, which turns SHARED_KERNEL_PMD
off and makes this the dominant mapping mode on 32-bit.

To make LDT working again vmalloc_sync_all() must only iterate over
the volatile parts of the kernel address range that are identical
between all processes.

So the correct check in vmalloc_sync_all() is "address < VMALLOC_END"
to make sure the VMALLOC areas are synchronized and the LDT
mapping is not falsely overwritten.

The CPU_ENTRY_AREA and the FIXMAP area are no longer synced either,
but this is not really a proplem since their PMDs get established
during bootup and never change.

This change fixes the ldt_gdt selftest in my setup.

[ mingo: Fixed up the changelog to explain the logic and modified the
         copying to only happen up until VMALLOC_END. ]

Reported-by: Borislav Petkov <bp@suse.de>
Tested-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Cc: <stable@vger.kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: hpa@zytor.com
Fixes: 7757d607c6b3: ("x86/pti: Allow CONFIG_PAGE_TABLE_ISOLATION for x86_32")
Link: https://lkml.kernel.org/r/20191126111119.GA110513@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: rc: mark input device as pointing stick

commit ce819649b03d932dc19b0cb6be513779bf64fad3 upstream.

libinput refuses pointer movement from rc-core, since it believes it's not
a pointer-type device:

libinput error: event17 - Media Center Ed. eHome Infrared Remote Transceiver (1784:0008): libinput bug: REL_X/Y from a non-pointer device

Fixes: 158bc148a31e ("media: rc: mce_kbd: input events via rc-core's input device")
Fixes: 0ac5a603a732 ("media: rc: imon: report mouse events using rc-core's input device")
Cc: stable@vger.kernel.org # 4.20+
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Input: Fix memory leak in psxpad_spi_probe

In the implementation of psxpad_spi_probe() the allocated memory for
pdev is leaked if psxpad_spi_init_ff() or input_register_polled_device()
fail. The solution is using device managed allocation, like the one used
for pad. Perform the allocation using
devm_input_allocate_polled_device().

Fixes: 8be193c7b1f4 ("Input: add support for PlayStation 1/2 joypads connected via SPI")
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

coresight: etm4x: Fix input validation for sysfs.

commit 2fe6899e36aa174abefd017887f9cfe0cb60c43a upstream.

A number of issues are fixed relating to sysfs input validation:-

1) bb_ctrl_store() - incorrect compare of bit select field to absolute
value. Reworked per ETMv4 specification.
2) seq_event_store() - incorrect mask value - register has two
event values.
3) cyc_threshold_store() - must mask with max before checking min
otherwise wrapped values can set illegal value below min.
4) res_ctrl_store() - update to mask off all res0 bits.

Reviewed-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Mike Leach <mike.leach@linaro.org>
Fixes: a77de2637c9eb ("coresight: etm4x: moving sysFS entries to a dedicated file")
Cc: stable <stable@vger.kernel.org> # 4.9+
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20191104181251.26732-6-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Input: goodix - add upside-down quirk for Teclast X89 tablet

commit df5b5e555b356662a5e4a23c6774fdfce8547d54 upstream.

The touchscreen on the Teclast X89 is mounted upside down in relation to
the display orientation (the touchscreen itself is mounted upright, but the
display is mounted upside-down). Add a quirk for this so that we send
coordinates which match the display orientation.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Bastien Nocera <hadess@hadess.net>
Link: https://lore.kernel.org/r/20191202085636.6650-1-hdegoede@redhat.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Input: synaptics-rmi4 - don't increment rmiaddr for SMBus transfers

commit a284e11c371e446371675668d8c8120a27227339 upstream.

This increment of rmi_smbus in rmi_smb_read/write_block() causes
garbage to be read/written.

The first read of SMB_MAX_COUNT bytes is fine, but after that
it is nonsense. Trial-and-error showed that by dropping the
increment of rmiaddr everything is fine and the F54 function
properly works.

I tried a hack with rmi_smb_write_block() as well (writing to the
same F54 touchpad data area, then reading it back), and that
suggests that there too the rmiaddr increment has to be dropped.
It makes sense that if it has to be dropped for read, then it has
to be dropped for write as well.

It looks like the initial work with F54 was done using i2c, not smbus,
and it seems nobody ever tested F54 with smbus. The other functions
all read/write less than SMB_MAX_COUNT as far as I can tell, so this
issue was never noticed with non-F54 functions.

With this change I can read out the touchpad data correctly on my
Lenovo X1 Carbon 6th Gen laptop.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Link: https://lore.kernel.org/r/8dd22e21-4933-8e9c-a696-d281872c8de7@xs4all.nl
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Input: synaptics-rmi4 - re-enable IRQs in f34v7_do_reflash

commit 86bcd3a12999447faad60ec59c2d64d18d8e61ac upstream.

F34 is a bit special as it reinitializes the device and related driver
structs during the firmware update. This clears the fn_irq_mask which
will then prevent F34 from receiving further interrupts, leading to
timeouts during the firmware update. Make sure to reinitialize the
IRQ enables at the appropriate times.

The issue is in F34 code, but the commit in the fixes tag exposed the
issue, as before this commit things would work by accident.

Fixes: 363c53875aef (Input: synaptics-rmi4 - avoid processing unknown IRQs)
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Link: https://lore.kernel.org/r/20191129133514.23224-1-l.stach@pengutronix.de
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Input: synaptics - switch another X1 Carbon 6 to RMI/SMbus

commit fc1156f373e3927e0dcf06678906c367588bfdd6 upstream.

Some Lenovo X1 Carbon Gen 6 laptops report LEN0091. Add this
to the smbus_pnp_ids list.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20191119105118.54285-2-hverkuil-cisco@xs4all.nl
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda: Modify stream stripe mask only when needed

commit e38e486d66e2a3b902768fd71c32dbf10f77e1cb upstream.

The recent commit in HD-audio stream management for changing the
stripe control seems causing a regression on some platforms.  The
stripe control is currently used only by HDMI codec, and applying the
stripe mask unconditionally may lead to scratchy and static noises as
seen on some MacBooks.

For addressing the regression, this patch changes the stream
management code to apply the stripe mask conditionally only when the
codec driver requested.

Fixes: 9b6f7e7a296e ("ALSA: hda: program stripe bits for controller")
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=204477
Tested-by: Michael Pobega <mpobega@neverware.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191202074947.1617-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda - Add mute led support for HP ProBook 645 G4

commit e190de6941db14813032af87873f5550ad5764fe upstream.

Mic mute led does not work on HP ProBook 645 G4.
We can use CXT_FIXUP_MUTE_LED_GPIO fixup to support it.

Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191120082035.18937-1-kai.heng.feng@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: pcm: oss: Avoid potential buffer overflows

commit 4cc8d6505ab82db3357613d36e6c58a297f57f7c upstream.

syzkaller reported an invalid access in PCM OSS read, and this seems
to be an overflow of the internal buffer allocated for a plugin.
Since the rate plugin adjusts its transfer size dynamically, the
calculation for the chained plugin might be bigger than the given
buffer size in some extreme cases, which lead to such an buffer
overflow as caught by KASAN.

Fix it by limiting the max transfer size properly by checking against
the destination size in each plugin transfer callback.

Reported-by: syzbot+f153bde47a62e0b05f83@syzkaller.appspotmail.com
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191204144824.17801-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/realtek - Dell headphone has noise on unmute for ALC236

commit e1e8c1fdce8b00fce08784d9d738c60ebf598ebc upstream.

headphone have noise even the volume is very small.
Let it fill up pcbeep hidden register to default value.
The issue was gone.

Fixes: 4344aec84bd8 ("ALSA: hda/realtek - New codec support for ALC256")
Fixes: 736f20a70608 ("ALSA: hda/realtek - Add support for ALC236/ALC3204")
Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/9ae47f23a64d4e41a9c81e263cd8a250@realtek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/realtek - Enable the headset-mic on a Xiaomi's laptop

commit 695d1ec3994f9de2cefae80ee2087c95d2e5a2f3 upstream.

The headset on this machine is not defined, after applying the quirk
ALC256_FIXUP_ASUS_HEADSET_MIC, the headset-mic works well

BugLink: https://bugs.launchpad.net/bugs/1846148
Cc: <stable@vger.kernel.org>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Link: https://lore.kernel.org/r/20191121025427.8856-1-hui.wang@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/realtek - Enable internal speaker of ASUS UX431FLC

commit 436e25505f3458cc92c7f3c985e9cbc198a98209 upstream.

Laptops like ASUS UX431FLC and UX431FL can share the same audio quirks.
But UX431FLC needs one more step to enable the internal speaker: Pull
the GPIO from CODEC to initialize the AMP.

Fixes: 60083f9e94b2 ("ALSA: hda/realtek - Enable internal speaker & headset mic of ASUS UX431FL")
Signed-off-by: Jian-Hong Pan <jian-hong@endlessm.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191125093405.5702-1-jian-hong@endlessm.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

SUNRPC: Avoid RPC delays when exiting suspend

commit 66eb3add452aa1be65ad536da99fac4b8f620b74 upstream.

Jon Hunter: "I have been tracking down another suspend/NFS related
issue where again I am seeing random delays exiting suspend. The delays
can be up to a couple minutes in the worst case and this is causing a
suspend test we have to fail."

Change the use of a deferrable work to a standard delayed one.

Reported-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Fixes: 7e0a0e38fcfea ("SUNRPC: Replace the queue timer with a delayed work function")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

io_uring: ensure req->submit is copied when req is deferred

There's an issue with deferred requests through drain, where if we do
need to defer, we're not copying over the sqe_submit state correctly.
This can result in using uninitialized data when we then later go and
submit the deferred request, like this check in __io_submit_sqe():

         if (unlikely(s->index >= ctx->sq_entries))
                 return -EINVAL;

with 's' being uninitialized, we can randomly fail this check. Fix this
by copying sqe_submit state when we defer a request.

Because it was fixed as part of a cleanup series in mainline, before
anyone realized we had this issue. That removed the separate states
of ->index vs ->submit.sqe. That series is not something I was
comfortable putting into stable, hence the much simpler addition.
Here's the patch in the series that fixes the same issue:

commit cf6fd4bd559ee61a4454b161863c8de6f30f8dca
Author: Pavel Begunkov <asml.silence@gmail.com>
Date:   Mon Nov 25 23:14:39 2019 +0300

    io_uring: inline struct sqe_submit

Reported-by: Andres Freund <andres@anarazel.de>
Reported-by: Tomáš Chaloupka
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fuse: verify attributes

commit eb59bd17d2fa6e5e84fba61a5ebdea984222e6d5 upstream.

If a filesystem returns negative inode sizes, future reads on the file were
causing the cpu to spin on truncate_pagecache.

Create a helper to validate the attributes.  This now does two things:

 - check the file mode
 - check if the file size fits in i_size without overflowing

Reported-by: Arijit Banerjee <arijit@rubrik.com>
Fixes: d8a5ba45457e ("[PATCH] FUSE - core")
Cc: <stable@vger.kernel.org> # v2.6.14
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fuse: verify nlink

commit c634da718db9b2fac201df2ae1b1b095344ce5eb upstream.

When adding a new hard link, make sure that i_nlink doesn't overflow.

Fixes: ac45d61357e8 ("fuse: fix nlink after unlink")
Cc: <stable@vger.kernel.org> # v3.4
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

io_uring: transform send/recvmsg() -ERESTARTSYS to -EINTR

commit 441cdbd5449b4923cd413d3ba748124f91388be9 upstream.

We should never return -ERESTARTSYS to userspace, transform it into
-EINTR.

Cc: stable@vger.kernel.org # v5.3+
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

i2c: core: fix use after free in of_i2c_notify

[ Upstream commit a4c2fec16f5e6a5fee4865e6e0e91e2bc2d10f37 ]

We can't use "adap->dev" after it has been freed.

Fixes: 5bf4fa7daea6 ("i2c: break out OF support into separate file")
Signed-off-by: Wen Yang <wenyang@linux.alibaba.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: ep93xx_eth: fix mismatch of request_mem_region in remove

[ Upstream commit 3df70afe8d33f4977d0e0891bdcfb639320b5257 ]

The driver calls release_resource in remove to match request_mem_region
in probe, which is incorrect.
Fix it by using the right one, release_mem_region.

Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

afs: Fix race in commit bulk status fetch

[ Upstream commit a28f239e296767ebf4ec4ae8a9ecb57d0d444b3f ]

When a lookup is done, the afs filesystem will perform a bulk status-fetch
operation on the requested vnode (file) plus the next 49 other vnodes from
the directory list (in AFS, directory contents are downloaded as blobs and
parsed locally).  When the results are received, it will speculatively
populate the inode cache from the extra data.

However, if the lookup races with another lookup on the same directory, but
for a different file - one that's in the 49 extra fetches, then if the bulk
status-fetch operation finishes first, it will try and update the inode
from the other lookup.

If this other inode is still in the throes of being created, however, this
will cause an assertion failure in afs_apply_status():

BUG_ON(test_bit(AFS_VNODE_UNSET, &vnode->flags));

on or about fs/afs/inode.c:175 because it expects data to be there already
that it can compare to.

Fix this by skipping the update if the inode is being created as the
creator will presumably set up the inode with the same information.

Fixes: 39db9815da48 ("afs: Fix application of the results of a inline bulk status fetch")
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: hns3: fix ETS bandwidth validation bug

[ Upstream commit c2d56897819338eb0ba8b93184f7d10329b36653 ]

Some device only support 4 TCs, but the driver check the total
bandwidth of 8 TCs, so may cause wrong configurations write to
the hw.

This patch uses hdev->tc_max to instead HNAE3_MAX_TC to fix it.

Fixes: e432abfb99e5 ("net: hns3: add common validation in hclge_dcb")
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: hns3: reallocate SSU' buffer size when pfc_en changes

[ Upstream commit aea8cfb35a82d6c2f3517c86694933ba766635e5 ]

When a TC's PFC is disabled or enabled, the RX private buffer for
this TC need to be changed too, otherwise this may cause packet
dropped problem.

This patch fixes it by calling hclge_buffer_alloc to reallocate
buffer when pfc_en changes.

Fixes: cacde272dd00 ("net: hns3: Add hclge_dcb module for the support of DCB feature")
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ravb: implement MTU change while device is up

[ Upstream commit 15fb35fa9ff456b81159033eba6397fcee85e671 ]

Pre-allocates buffers sufficient for the maximum supported MTU (2026) in
order to eliminate the possibility of resource exhaustion when changing the
MTU while the device is up.

Signed-off-by: Ulrich Hecht <uli+renesas@fpond.eu>
Reviewed-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

rsxx: add missed destroy_workqueue calls in remove

[ Upstream commit dcb77e4b274b8f13ac6482dfb09160cd2fae9a40 ]

The driver misses calling destroy_workqueue in remove like what is done
when probe fails.
Add the missed calls to fix it.

Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

rbd: silence bogus uninitialized warning in rbd_object_map_update_finish()

[ Upstream commit 633739b2fedb6617d782ca252797b7a8ad754347 ]

Some versions of gcc (so far 6.3 and 7.4) throw a warning:

  drivers/block/rbd.c: In function 'rbd_object_map_callback':
  drivers/block/rbd.c:2124:21: warning: 'current_state' may be used uninitialized in this function [-Wmaybe-uninitialized]
        (current_state == OBJECT_EXISTS && state == OBJECT_EXISTS_CLEAN))
  drivers/block/rbd.c:2092:23: note: 'current_state' was declared here
    u8 state, new_state, current_state;
                          ^~~~~~~~~~~~~

It's bogus because all current_state accesses are guarded by
has_current_state.

Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Dongsheng Yang <dongsheng.yang@easystack.cn>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests: kvm: fix build with glibc >= 2.30

[ Upstream commit e37f9f139f62deddff90c7298ae3a85026a71067 ]

Glibc-2.30 gained gettid() wrapper, selftests fail to compile:

lib/assert.c:58:14: error: static declaration of ‘gettid’ follows non-static declaration
   58 | static pid_t gettid(void)
      |              ^~~~~~
In file included from /usr/include/unistd.h:1170,
                 from include/test_util.h:18,
                 from lib/assert.c:10:
/usr/include/bits/unistd_ext.h:34:16: note: previous declaration of ‘gettid’ was here
   34 | extern __pid_t gettid (void) __THROW;
      |                ^~~~~~

Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/sun4i: tcon: Set min division of TCON0_DCLK to 1.

[ Upstream commit 0b8e7bbde5e7e2c419567e1ee29587dae3b78ee3 ]

The datasheet of V3s (and various other chips) wrote
that TCON0_DCLK_DIV can be >= 1 if only dclk is used,
and must >= 6 if dclk1 or dclk2 is used. As currently
neither dclk1 nor dclk2 is used (no writes to these
bits), let's set minimal division to 1.

If this minimal division is 6, some common dot clock
frequencies can't be produced (e.g. 30MHz will not be
possible and will fallback to 25MHz), which is
obviously not an expected behaviour.

Signed-off-by: Yunhao Tian <t123yh@outlook.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/linux-arm-kernel/MN2PR08MB57905AD8A00C08DA219377C989760@MN2PR08MB5790.namprd08.prod.outlook.com/
Signed-off-by: Sasha Levin <sashal@kernel.org>

x86/resctrl: Fix potential lockdep warning

[ Upstream commit c8eafe1495303bfd0eedaa8156b1ee9082ee9642 ]

rdtgroup_cpus_write() and mkdir_rdt_prepare() call
rdtgroup_kn_lock_live() -> kernfs_to_rdtgroup() to get 'rdtgrp', and
then call the rdt_last_cmd_{clear,puts,...}() functions which will check
if rdtgroup_mutex is held/requires its caller to hold rdtgroup_mutex.

But if 'rdtgrp' returned from kernfs_to_rdtgroup() is NULL,
rdtgroup_mutex is not held and calling rdt_last_cmd_{clear,puts,...}()
will result in a self-incurred, potential lockdep warning.

Remove the rdt_last_cmd_{clear,puts,...}() calls in these two paths.
Just returning error should be sufficient to report to the user that the
entry doesn't exist any more.

 [ bp: Massage. ]

Fixes: 94457b36e8a5 ("x86/intel_rdt: Add diagnostics when writing the cpus file")
Fixes: cfd0f34e4cd5 ("x86/intel_rdt: Add diagnostics when making directories")
Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Fenghua Yu <fenghua.yu@intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: pei.p.jia@intel.com
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: x86-ml <x86@kernel.org>
Link: https://lkml.kernel.org/r/1573079796-11713-1-git-send-email-xiaochen.shen@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: pcm: Fix stream lock usage in snd_pcm_period_elapsed()

[ Upstream commit f5cdc9d4003a2f66ea57b3edd3e04acc2b1a4439 ]

If the nullity check for `substream->runtime` is outside of the lock
region, it is possible to have a null runtime in the critical section
if snd_pcm_detach_substream is called right before the lock.

Signed-off-by: paulhsia <paulhsia@chromium.org>
Link: https://lore.kernel.org/r/20191112171715.128727-2-paulhsia@chromium.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf/core: Consistently fail fork on allocation failures

[ Upstream commit 697d877849d4b34ab58d7078d6930bad0ef6fc66 ]

Commit:

  313ccb9615948 ("perf: Allocate context task_ctx_data for child event")

makes the inherit path skip over the current event in case of task_ctx_data
allocation failure. This, however, is inconsistent with allocation failures
in perf_event_alloc(), which would abort the fork.

Correct this by returning an error code on task_ctx_data allocation
failure and failing the fork in that case.

Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: https://lkml.kernel.org/r/20191105075702.60319-1-alexander.shishkin@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

sched/pelt: Fix update of blocked PELT ordering

[ Upstream commit b90f7c9d2198d789709390280a43e0a46345682b ]

update_cfs_rq_load_avg() can call cpufreq_update_util() to trigger an
update of the frequency. Make sure that RT, DL and IRQ PELT signals have
been updated before calling cpufreq.

Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: dietmar.eggemann@arm.com
Cc: dsmythies@telus.net
Cc: juri.lelli@redhat.com
Cc: mgorman@suse.de
Cc: rostedt@goodmis.org
Fixes: 371bf4273269 ("sched/rt: Add rt_rq utilization tracking")
Fixes: 3727e0e16340 ("sched/dl: Add dl_rq utilization tracking")
Fixes: 91c27493e78d ("sched/irq: Add IRQ utilization tracking")
Link: https://lkml.kernel.org/r/1572434309-32512-1-git-send-email-vincent.guittot@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

sched/core: Avoid spurious lock dependencies

[ Upstream commit ff51ff84d82aea5a889b85f2b9fb3aa2b8691668 ]

While seemingly harmless, __sched_fork() does hrtimer_init(), which,
when DEBUG_OBJETS, can end up doing allocations.

This then results in the following lock order:

  rq->lock
    zone->lock.rlock
      batched_entropy_u64.lock

Which in turn causes deadlocks when we do wakeups while holding that
batched_entropy lock -- as the random code does.

Solve this by moving __sched_fork() out from under rq->lock. This is
safe because nothing there relies on rq->lock, as also evident from the
other __sched_fork() callsite.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qian Cai <cai@lca.pw>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: akpm@linux-foundation.org
Cc: bigeasy@linutronix.de
Cc: cl@linux.com
Cc: keescook@chromium.org
Cc: penberg@kernel.org
Cc: rientjes@google.com
Cc: thgarnie@google.com
Cc: tytso@mit.edu
Cc: will@kernel.org
Fixes: b7d5dc21072c ("random: add a spinlock_t to struct batched_entropy")
Link: https://lkml.kernel.org/r/20191001091837.GK4536@hirez.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Input: cyttsp4_core - fix use after free bug

[ Upstream commit 79aae6acbef16f720a7949f8fc6ac69816c79d62 ]

The device md->input is used after it is released. Setting the device
data to NULL is unnecessary as the device is never used again. Instead,
md->input should be assigned NULL to avoid accessing the freed memory
accidently. Besides, checking md->si against NULL is superfluous as it
points to a variable address, which cannot be NULL.

Signed-off-by: Pan Bian <bianpan2016@163.com>
Link: https://lore.kernel.org/r/1572936379-6423-1-git-send-email-bianpan2016@163.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

block: check bi_size overflow before merge

[ Upstream commit e3a5d8e386c3fb973fa75f2403622a8f3640ec06 ]

__bio_try_merge_page() may merge a page to bio without bio_full() check
and cause bi_size overflow.

The overflow typically ends up with sd_init_command() warning on zero
segment request with call trace like this:

    ------------[ cut here ]------------
    WARNING: CPU: 2 PID: 1986 at drivers/scsi/scsi_lib.c:1025 scsi_init_io+0x156/0x180
    CPU: 2 PID: 1986 Comm: kworker/2:1H Kdump: loaded Not tainted 5.4.0-rc7 #1
    Workqueue: kblockd blk_mq_run_work_fn
    RIP: 0010:scsi_init_io+0x156/0x180
    RSP: 0018:ffffa11487663bf0 EFLAGS: 00010246
    RAX: 00000000002be0a0 RBX: ffff8e6e9ff30118 RCX: 0000000000000000
    RDX: 00000000ffffffe1 RSI: 0000000000000000 RDI: ffff8e6e9ff30118
    RBP: ffffa11487663c18 R08: ffffa11487663d28 R09: ffff8e6e9ff30150
    R10: 0000000000000001 R11: 0000000000000000 R12: ffff8e6e9ff30000
    R13: 0000000000000001 R14: ffff8e74a1cf1800 R15: ffff8e6e9ff30000
    FS:  0000000000000000(0000) GS:ffff8e6ea7680000(0000) knlGS:0000000000000000
    CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
    CR2: 00007fff18cf0fe8 CR3: 0000000659f0a001 CR4: 00000000001606e0
    Call Trace:
     sd_init_command+0x326/0xb40 [sd_mod]
     scsi_queue_rq+0x502/0xaa0
     ? blk_mq_get_driver_tag+0xe7/0x120
     blk_mq_dispatch_rq_list+0x256/0x5a0
     ? elv_rb_del+0x24/0x30
     ? deadline_remove_request+0x7b/0xc0
     blk_mq_do_dispatch_sched+0xa3/0x140
     blk_mq_sched_dispatch_requests+0xfb/0x170
     __blk_mq_run_hw_queue+0x81/0x130
     blk_mq_run_work_fn+0x1b/0x20
     process_one_work+0x179/0x390
     worker_thread+0x4f/0x3e0
     kthread+0x105/0x140
     ? max_active_store+0x80/0x80
     ? kthread_bind+0x20/0x20
     ret_from_fork+0x35/0x40
    ---[ end trace f9036abf5af4a4d3 ]---
    blk_update_request: I/O error, dev sdd, sector 2875552 op 0x1:(WRITE) flags 0x0 phys_seg 0 prio class 0
    XFS (sdd1): writeback error on sector 2875552

__bio_try_merge_page() should check the overflow before actually doing
merge.

Fixes: 07173c3ec276c ("block: enable multipage bvecs")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

xfrm: release device reference for invalid state

[ Upstream commit 4944a4b1077f74d89073624bd286219d2fcbfce3 ]

An ESP packet could be decrypted in async mode if the input handler for
this packet returns -EINPROGRESS in xfrm_input(). At this moment the device
reference in skb is held. Later xfrm_input() will be invoked again to
resume the processing.
If the transform state is still valid it would continue to release the
device reference and there won't be a problem; however if the transform
state is not valid when async resumption happens, the packet will be
dropped while the device reference is still being held.
When the device is deleted for some reason and the reference to this
device is not properly released, the kernel will keep logging like:

unregister_netdevice: waiting for ppp2 to become free. Usage count = 1

The issue is observed when running IPsec traffic over a PPPoE device based
on a bridge interface. By terminating the PPPoE connection on the server
end for multiple times, the PPPoE device on the client side will eventually
get stuck on the above warning message.

This patch will check the async mode first and continue to release device
reference in async resumption, before it is dropped due to invalid state.

v2: Do not assign address family from outer_mode in the transform if the
state is invalid

v3: Release device reference in the error path instead of jumping to resume

Fixes: 4ce3dbe397d7b ("xfrm: Fix xfrm_input() to verify state is valid when (encap_type < 0)")
Signed-off-by: Xiaodong Xu <stid.smth@gmail.com>
Reported-by: Bo Chen <chenborfc@163.com>
Tested-by: Bo Chen <chenborfc@163.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

NFC: nxp-nci: Fix NULL pointer dereference after I2C communication error

[ Upstream commit a71a29f50de1ef97ab55c151a1598eb12dde379d ]

I2C communication errors (-EREMOTEIO) during the IRQ handler of nxp-nci
result in a NULL pointer dereference at the moment:

    BUG: kernel NULL pointer dereference, address: 0000000000000000
    Oops: 0002 [#1] PREEMPT SMP NOPTI
    CPU: 1 PID: 355 Comm: irq/137-nxp-nci Not tainted 5.4.0-rc6 #1
    RIP: 0010:skb_queue_tail+0x25/0x50
    Call Trace:
     nci_recv_frame+0x36/0x90 [nci]
     nxp_nci_i2c_irq_thread_fn+0xd1/0x285 [nxp_nci_i2c]
     ? preempt_count_add+0x68/0xa0
     ? irq_forced_thread_fn+0x80/0x80
     irq_thread_fn+0x20/0x60
     irq_thread+0xee/0x180
     ? wake_threads_waitq+0x30/0x30
     kthread+0xfb/0x130
     ? irq_thread_check_affinity+0xd0/0xd0
     ? kthread_park+0x90/0x90
     ret_from_fork+0x1f/0x40

Afterward the kernel must be rebooted to work properly again.

This happens because it attempts to call nci_recv_frame() with skb == NULL.
However, unlike nxp_nci_fw_recv_frame(), nci_recv_frame() does not have any
NULL checks for skb, causing the NULL pointer dereference.

Change the code to call only nxp_nci_fw_recv_frame() in case of an error.
Make sure to log it so it is obvious that a communication error occurred.
The error above then becomes:

    nxp-nci_i2c i2c-NXP1001:00: NFC: Read failed with error -121
    nci: __nci_request: wait_for_completion_interruptible_timeout failed 0
    nxp-nci_i2c i2c-NXP1001:00: NFC: Read failed with error -121

Fixes: 6be88670fc59 ("NFC: nxp-nci_i2c: Add I2C support to NXP NCI driver")
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: hda: Add Cometlake-S PCI ID

[ Upstream commit b73a58549ea37a44434c7afab3c7ad9af210cfd9 ]

Add HD Audio Device PCI ID for the Intel Cometlake-S platform

Signed-off-by: Chiou, Cooper <cooper.chiou@intel.com>
Link: https://lore.kernel.org/r/20191108071349.12840-1-cooper.chiou@intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ecryptfs: fix unlink and rmdir in face of underlying fs modifications

[ Upstream commit bcf0d9d4b76976f892154efdfc509b256fd898e8 ]

A problem similar to the one caught in commit 74dd7c97ea2a ("ecryptfs_rename():
verify that lower dentries are still OK after lock_rename()") exists for
unlink/rmdir as well.

Instead of playing with dget_parent() of underlying dentry of victim
and hoping it's the same as underlying dentry of our directory,
do the following:
        * find the underlying dentry of victim
        * find the underlying directory of victim's parent (stable
since the victim is ecryptfs dentry and inode of its parent is
held exclusive by the caller).
        * lock the inode of dentry underlying the victim's parent
        * check that underlying dentry of victim is still hashed and
has the right parent - it can be moved, but it can't be moved to/from
the directory we are holding exclusive.  So while ->d_parent itself
might not be stable, the result of comparison is.

If the check passes, everything is fine - underlying directory is locked,
underlying victim is still a child of that directory and we can go ahead
and feed them to vfs_unlink().  As in the current mainline we need to
pin the underlying dentry of victim, so that it wouldn't go negative under
us, but that's the only temporary reference that needs to be grabbed there.
Underlying dentry of parent won't go away (it's pinned by the parent,
which is held by caller), so there's no need to grab it.

The same problem (with the same solution) exists for rmdir.  Moreover,
rename gets simpler and more robust with the same "don't bother with
dget_parent()" approach.

Fixes: 74dd7c97ea2 "ecryptfs_rename(): verify that lower dentries are still OK after lock_rename()"
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

audit_get_nd(): don't unlock parent too early

[ Upstream commit 69924b89687a2923e88cc42144aea27868913d0e ]

if the child has been negative and just went positive
under us, we want coherent d_is_positive() and ->d_inode.
Don't unlock the parent until we'd done that work...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

exportfs_decode_fh(): negative pinned may become positive without the parent locked

[ Upstream commit a2ece088882666e1dc7113744ac912eb161e3f87 ]

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cgroup: don't put ERR_PTR() into fc->root

[ Upstream commit 630faf81b3e61bcc90dc6d8b497800657d2752a5 ]

the caller of ->get_tree() expects NULL left there on error...

Reported-by: Thibaut Sautereau <thibaut@sautereau.fr>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iwlwifi: pcie: don't consider IV len in A-MSDU

[ Upstream commit cb1a4badf59275eb7221dcec621e8154917eabd1 ]

From gen2 PN is totally offloaded to hardware (also the space for the
IV isn't part of the skb).  As you can see in mvm/mac80211.c:3545, the
MAC for cipher types CCMP/GCMP doesn't set
IEEE80211_KEY_FLAG_PUT_IV_SPACE for gen2 NICs.

This causes all the AMSDU data to be corrupted with cipher enabled.

Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/hns: Correct the value of srq_desc_size

[ Upstream commit 411c1e6774e2e1f96b1ccce4f119376b94ade3e4 ]

srq_desc_size should be rounded up to pow of two before used, or related
calculation may cause allocating wrong size of memory for srq buffer.

Fixes: c7bcb13442e1 ("RDMA/hns: Add SRQ support for hip08 kernel mode")
Link: https://lore.kernel.org/r/1572575610-52530-3-git-send-email-liweihang@hisilicon.com
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Weihang Li <liweihang@hisilicon.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/hns: Correct the value of HNS_ROCE_HEM_CHUNK_LEN

[ Upstream commit 531eb45b3da4267fc2a64233ba256c8ffb02edd2 ]

Size of pointer to buf field of struct hns_roce_hem_chunk should be
considered when calculating HNS_ROCE_HEM_CHUNK_LEN, or sg table size will
be larger than expected when allocating hem.

Fixes: 9a4435375cd1 ("IB/hns: Add driver files for hns RoCE driver")
Link: https://lore.kernel.org/r/1572575610-52530-2-git-send-email-liweihang@hisilicon.com
Signed-off-by: Sirong Wang <wangsirong@huawei.com>
Signed-off-by: Weihang Li <liweihang@hisilicon.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

MIPS: SGI-IP27: fix exception handler replication

[ Upstream commit 637346748245e94c877aa746e6fe0d7079b7736a ]

Commit 775b089aeffa ("MIPS: tlbex: Remove cpu_has_local_ebase") removed
generating tlb refill handlers for every CPU, which was needed for
generating per node exception handlers on IP27. Instead of resurrecting
(and fixing) refill handler generation, we simply copy all exception
vectors from the boot node to the other nodes. Also remove the config
option since the memory tradeoff for expection handler replication
is just 8k per node.

Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
Signed-off-by: Paul Burton <paulburton@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Burton <paul.burton@mips.com>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

autofs: fix a leak in autofs_expire_indirect()

[ Upstream commit 03ad0d703df75c43f78bd72e16124b5b94a95188 ]

if the second call of should_expire() in there ends up
grabbing and returning a new reference to dentry, we need
to drop it before continuing.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

aio: Fix io_pgetevents() struct __compat_aio_sigset layout

[ Upstream commit 97eba80fcca754856d09e048f469db22773bec68 ]

This type is used to pass the sigset_t from userland to the kernel,
but it was using the kernel native pointer type for the member
representing the compat userland pointer to the userland sigset_t.

This messes up the layout, and makes the kernel eat up both the
userland pointer and the size members into the kernel pointer, and
then reads garbage into the kernel sigsetsize. Which makes the sigset_t
size consistency check fail, and consequently the syscall always
returns -EINVAL.

This breaks both libaio and strace on 32-bit userland running on 64-bit
kernels. And there are apparently no users in the wild of the current
broken layout (at least according to codesearch.debian.org and a brief
check over github.com search). So it looks safe to fix this directly
in the kernel, instead of either letting userland deal with this
permanently with the additional overhead or trying to make the syscall
infer what layout userland used, even though this is also being worked
around in libaio to temporarily cope with kernels that have not yet
been fixed.

We use a proper compat_uptr_t instead of a compat_sigset_t pointer.

Fixes: 7a074e96dee6 ("aio: implement io_pgetevents")
Signed-off-by: Guillem Jover <guillem@hadrons.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

serial: ifx6x60: add missed pm_runtime_disable

commit 50b2b571c5f3df721fc81bf9a12c521dfbe019ba upstream.

The driver forgets to call pm_runtime_disable in remove.
Add the missed calls to fix it.

Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191118024833.21587-1-hslester96@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

serial: stm32: fix clearing interrupt error flags

commit 1250ed7114a977cdc2a67a0c09d6cdda63970eb9 upstream.

The interrupt clear flag register is a "write 1 to clear" register.
So, only writing ones allows to clear flags:
- Replace buggy stm32_clr_bits() by a simple write to clear error flags
- Replace useless read/modify/write stm32_set_bits() routine by a
  simple write to clear TC (transfer complete) flag.

Fixes: 4f01d833fdcd ("serial: stm32: fix rx error handling")
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/1574323849-1909-1-git-send-email-fabrice.gasnier@st.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

serial: serial_core: Perform NULL checks for break_ctl ops

commit 7d73170e1c282576419f8b50a771f1fcd2b81a94 upstream.

Doing fuzz test on sbsa uart device, causes a kernel crash
due to NULL pointer dereference:

------------[ cut here ]------------
Unable to handle kernel paging request at virtual address fffffffffffffffc
pgd = ffffffe331723000
[fffffffffffffffc] *pgd=0000002333595003, *pud=0000002333595003, *pmd=00000
Internal error: Oops: 96000005 [#1] PREEMPT SMP
Modules linked in: ping(O) jffs2 rtos_snapshot(O) pramdisk(O) hisi_sfc(O)
Drv_Nandc_K(O) Drv_SysCtl_K(O) Drv_SysClk_K(O) bsp_reg(O) hns3(O)
hns3_uio_enet(O) hclgevf(O) hclge(O) hnae3(O) mdio_factory(O)
mdio_registry(O) mdio_dev(O) mdio(O) hns3_info(O) rtos_kbox_panic(O)
uart_suspend(O) rsm(O) stp llc tunnel4 xt_tcpudp ipt_REJECT nf_reject_ipv4
iptable_filter ip_tables x_tables sd_mod xhci_plat_hcd xhci_pci xhci_hcd
usbmon usbhid usb_storage ohci_platform ohci_pci ohci_hcd hid_generic hid
ehci_platform ehci_pci ehci_hcd vfat fat usbcore usb_common scsi_mod
yaffs2multi(O) ext4 jbd2 ext2 mbcache ofpart i2c_dev i2c_core uio ubi nand
nand_ecc nand_ids cfi_cmdset_0002 cfi_cmdset_0001 cfi_probe gen_probe
cmdlinepart chipreg mtdblock mtd_blkdevs mtd nfsd auth_rpcgss oid_registry
nfsv3 nfs nfs_acl lockd sunrpc grace autofs4
CPU: 2 PID: 2385 Comm: tty_fuzz_test Tainted: G           O    4.4.193 #1
task: ffffffe32b23f110 task.stack: ffffffe32bda4000
PC is at uart_break_ctl+0x44/0x84
LR is at uart_break_ctl+0x34/0x84
pc : [<ffffff8393196098>] lr : [<ffffff8393196088>] pstate: 80000005
sp : ffffffe32bda7cc0
x29: ffffffe32bda7cc0 x28: ffffffe32b23f110
x27: ffffff8393402000 x26: 0000000000000000
x25: ffffffe32b233f40 x24: ffffffc07a8ec680
x23: 0000000000005425 x22: 00000000ffffffff
x21: ffffffe33ed73c98 x20: 0000000000000000
x19: ffffffe33ed94168 x18: 0000000000000004
x17: 0000007f92ae9d30 x16: ffffff8392fa6064
x15: 0000000000000010 x14: 0000000000000000
x13: 0000000000000000 x12: 0000000000000000
x11: 0000000000000020 x10: 0000007ffdac1708
x9 : 0000000000000078 x8 : 000000000000001d
x7 : 0000000052a64887 x6 : ffffffe32bda7e08
x5 : ffffffe32b23c000 x4 : 0000005fbc5b0000
x3 : ffffff83938d5018 x2 : 0000000000000080
x1 : ffffffe32b23c040 x0 : ffffff83934428f8
virtual start addr offset is 38ac00000
module base offset is 2cd4cf1000
linear region base offset is : 0
Process tty_fuzz_test (pid: 2385, stack limit = 0xffffffe32bda4000)
Stack: (0xffffffe32bda7cc0 to 0xffffffe32bda8000)
7cc0: ffffffe32bda7cf0 ffffff8393177718 ffffffc07a8ec680 ffffff8393196054
7ce0: 000000001739f2e0 0000007ffdac1978 ffffffe32bda7d20 ffffff8393179a1c
7d00: 0000000000000000 ffffff8393c0a000 ffffffc07a8ec680 cb88537fdc8ba600
7d20: ffffffe32bda7df0 ffffff8392fa5a40 ffffff8393c0a000 0000000000005425
7d40: 0000007ffdac1978 ffffffe32b233f40 ffffff8393178dcc 0000000000000003
7d60: 000000000000011d 000000000000001d ffffffe32b23f110 000000000000029e
7d80: ffffffe34fe8d5d0 0000000000000000 ffffffe32bda7e14 cb88537fdc8ba600
7da0: ffffffe32bda7e30 ffffff8393042cfc ffffff8393c41720 ffffff8393c46410
7dc0: ffffff839304fa68 ffffffe32b233f40 0000000000005425 0000007ffdac1978
7de0: 000000000000011d cb88537fdc8ba600 ffffffe32bda7e70 ffffff8392fa60cc
7e00: 0000000000000000 ffffffe32b233f40 ffffffe32b233f40 0000000000000003
7e20: 0000000000005425 0000007ffdac1978 ffffffe32bda7e70 ffffff8392fa60b0
7e40: 0000000000000280 ffffffe32b233f40 ffffffe32b233f40 0000000000000003
7e60: 0000000000005425 cb88537fdc8ba600 0000000000000000 ffffff8392e02e78
7e80: 0000000000000280 0000005fbc5b0000 ffffffffffffffff 0000007f92ae9d3c
7ea0: 0000000060000000 0000000000000015 0000000000000003 0000000000005425
7ec0: 0000007ffdac1978 0000000000000000 00000000a54c910e 0000007f92b95014
7ee0: 0000007f92b95090 0000000052a64887 000000000000001d 0000000000000078
7f00: 0000007ffdac1708 0000000000000020 0000000000000000 0000000000000000
7f20: 0000000000000000 0000000000000010 000000556acf0090 0000007f92ae9d30
7f40: 0000000000000004 000000556acdef10 0000000000000000 000000556acdebd0
7f60: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
7f80: 0000000000000000 0000000000000000 0000000000000000 0000007ffdac1840
7fa0: 000000556acdedcc 0000007ffdac1840 0000007f92ae9d3c 0000000060000000
7fc0: 0000000000000000 0000000000000000 0000000000000003 000000000000001d
7fe0: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
Call trace:
Exception stack(0xffffffe32bda7ab0 to 0xffffffe32bda7bf0)
7aa0:                                   0000000000001000 0000007fffffffff
7ac0: ffffffe32bda7cc0 ffffff8393196098 0000000080000005 0000000000000025
7ae0: ffffffe32b233f40 ffffff83930d777c ffffffe32bda7b30 ffffff83930d777c
7b00: ffffffe32bda7be0 ffffff83938d5000 ffffffe32bda7be0 ffffffe32bda7c20
7b20: ffffffe32bda7b60 ffffff83930d777c ffffffe32bda7c10 ffffff83938d5000
7b40: ffffffe32bda7c10 ffffffe32bda7c50 ffffff8393c0a000 ffffffe32b23f110
7b60: ffffffe32bda7b70 ffffff8392e09df4 ffffffe32bda7bb0 cb88537fdc8ba600
7b80: ffffff83934428f8 ffffffe32b23c040 0000000000000080 ffffff83938d5018
7ba0: 0000005fbc5b0000 ffffffe32b23c000 ffffffe32bda7e08 0000000052a64887
7bc0: 000000000000001d 0000000000000078 0000007ffdac1708 0000000000000020
7be0: 0000000000000000 0000000000000000
[<ffffff8393196098>] uart_break_ctl+0x44/0x84
[<ffffff8393177718>] send_break+0xa0/0x114
[<ffffff8393179a1c>] tty_ioctl+0xc50/0xe84
[<ffffff8392fa5a40>] do_vfs_ioctl+0xc4/0x6e8
[<ffffff8392fa60cc>] SyS_ioctl+0x68/0x9c
[<ffffff8392e02e78>] __sys_trace_return+0x0/0x4
Code: b9410ea0 34000160 f9408aa0 f9402814 (b85fc280)
---[ end trace 8606094f1960c5e0 ]---
Kernel panic - not syncing: Fatal exception

Fix this problem by adding NULL checks prior to calling break_ctl ops.

Signed-off-by: Jiangfeng Xiao <xiaojiangfeng@huawei.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/1574263133-28259-1-git-send-email-xiaojiangfeng@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

serial: pl011: Fix DMA ->flush_buffer()

commit f6a196477184b99a31d16366a8e826558aa11f6d upstream.

PL011's ->flush_buffer() implementation releases and reacquires the port
lock.  Due to a race condition here, data can end up being added to the
circular buffer but neither being discarded nor being sent out.  This
leads to, for example, tcdrain(2) waiting indefinitely.

Process A                       Process B

uart_flush_buffer()
 - acquire lock
 - circ_clear
 - pl011_flush_buffer()
 -- release lock
 -- dmaengine_terminate_all()

                                uart_write()
                                - acquire lock
                                - add chars to circ buffer
                                - start_tx()
                                -- start DMA
                                - release lock

 -- acquire lock
 -- turn off DMA
 -- release lock

                                // Data in circ buffer but DMA is off

According to the comment in the code, the releasing of the lock around
dmaengine_terminate_all() is to avoid a deadlock with the DMA engine
callback.  However, since the time this code was written, the DMA engine
API documentation seems to have been clarified to say that
dmaengine_terminate_all() (in the identically implemented but
differently named dmaengine_terminate_async() variant) does not wait for
any running complete callback to be completed and can even be called
from a complete callback.  So there is no possibility of deadlock if the
DMA engine driver implements this API correctly.

So we should be able to just remove this release and reacquire of the
lock to prevent the aforementioned race condition.

Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191118092547.32135-1-vincent.whitchurch@axis.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tty: serial: msm_serial: Fix flow control

commit b027ce258369cbfa88401a691c23dad01deb9f9b upstream.

hci_qca interfaces to the wcn3990 via a uart_dm on the msm8998 mtp and
Lenovo Miix 630 laptop.  As part of initializing the wcn3990, hci_qca
disables flow, configures the uart baudrate, and then reenables flow - at
which point an event is expected to be received over the uart from the
wcn3990.  It is observed that this event comes after the baudrate change
but before hci_qca re-enables flow. This is unexpected, and is a result of
msm_reset() being broken.

According to the uart_dm hardware documentation, it is recommended that
automatic hardware flow control be enabled by setting RX_RDY_CTL.  Auto
hw flow control will manage RFR based on the configured watermark.  When
there is space to receive data, the hw will assert RFR.  When the watermark
is hit, the hw will de-assert RFR.

The hardware documentation indicates that RFR can me manually managed via
CR when RX_RDY_CTL is not set.  SET_RFR asserts RFR, and RESET_RFR
de-asserts RFR.

msm_reset() is broken because after resetting the hardware, it
unconditionally asserts RFR via SET_RFR.  This enables flow regardless of
the current configuration, and would undo a previous flow disable
operation.  It should instead de-assert RFR via RESET_RFR to block flow
until the hardware is reconfigured.  msm_serial should rely on the client
to specify that flow should be enabled, either via mctrl() or the termios
structure, and only assert RFR in response to those triggers.

Fixes: 04896a77a97b ("msm_serial: serial driver for MSM7K onboard serial peripheral.")
Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: stable <stable@vger.kernel.org>
Reviewed-by: Andy Gross <agross@kernel.org>
Link: https://lore.kernel.org/r/20191021154616.25457-1-jeffrey.l.hugo@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tty: serial: fsl_lpuart: use the sg count from dma_map_sg

commit 487ee861de176090b055eba5b252b56a3b9973d6 upstream.

The dmaengine_prep_slave_sg needs to use sg count returned
by dma_map_sg, not use sport->dma_tx_nents, because the return
value of dma_map_sg is not always same with "nents".

When enabling iommu for lpuart + edma, iommu framework may concatenate
two sgs into one.

Fixes: 6250cc30c4c4e ("tty: serial: fsl_lpuart: Use scatter/gather DMA for Tx")
Cc: <stable@vger.kernel.org>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/1572932977-17866-1-git-send-email-peng.fan@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: gadget: u_serial: add missing port entry locking

commit daf82bd24e308c5a83758047aff1bd81edda4f11 upstream.

gserial_alloc_line() misses locking (for a release barrier) while
resetting port entry on TTY allocation failure. Fix this.

Cc: stable@vger.kernel.org
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tested-by: Ladislav Michl <ladis@linux-mips.org>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

time: Zero the upper 32-bits in __kernel_timespec on 32-bit

commit 7b8474466ed97be458c825f34a85f2c2b84c3f95 upstream.

On compat interfaces, the high order bits of nanoseconds should be zeroed
out. This is because the application code or the libc do not guarantee
zeroing of these. If used without zeroing, kernel might be at risk of using
timespec values incorrectly.

Originally it was handled correctly, but lost during is_compat_syscall()
cleanup. Revert the condition back to check CONFIG_64BIT.

Fixes: 98f76206b335 ("compat: Cleanup in_compat_syscall() callers")
Reported-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20191121000303.126523-1-dima@arista.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

lp: fix sparc64 LPSETTIMEOUT ioctl

commit 45a2d64696b11913bcf1087b041740edbade3e21 upstream.

The layout of struct timeval is different on sparc64 from
anything else, and the patch I did long ago failed to take
this into account.

Change it now to handle sparc64 user space correctly again.

Quite likely nobody cares about parallel ports on sparc64,
but there is no reason not to fix it.

Cc: stable@vger.kernel.org
Fixes: 9a450484089d ("lp: support 64-bit time_t user space")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20191108203435.112759-7-arnd@arndb.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sparc64: implement ioremap_uc

commit 38e45d81d14e5f78cd67922596b1c37b4c22ec74 upstream.

On sparc64, the whole physical IO address space is accessible using
physically addressed loads and stores. *_uc does nothing like the
others.

Cc: <stable@vger.kernel.org> # v4.19+
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Tuowen Zhao <ztuowen@gmail.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf scripts python: exported-sql-viewer.py: Fix use of TRUE with SQLite

commit af833988c088d3fed3e7188e7c3dd9ca17178dc3 upstream.

Prior to version 3.23 SQLite does not support TRUE or FALSE, so always
use 1 and 0 for SQLite.

Fixes: 26c11206f433 ("perf scripts python: exported-sql-viewer.py: Use new 'has_calls' column")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: stable@vger.kernel.org # v5.3+
Link: http://lore.kernel.org/lkml/20191113120206.26957-1-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
[Adrian: backported to v5.3, v5.4]
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: tegra: Fix 'active-low' warning for Jetson TX1 regulator

commit 1e5e929c009559bd7e898ac8e17a5d01037cb057 upstream.

Commit 34993594181d ("arm64: tegra: Enable HDMI on Jetson TX1")
added a regulator for HDMI on the Jetson TX1 platform. This regulator
has an active high enable, but the GPIO specifier for enabling the
regulator incorrectly defines it as active-low. This causes the
following warning to occur on boot ...

 WARNING KERN regulator@10 GPIO handle specifies active low - ignored

The fixed-regulator binding does not use the active-low flag from the
gpio specifier and purely relies of the presence of the
'enable-active-high' property to determine if it is active high or low
(if this property is omitted). Fix this warning by setting the GPIO
to active-high in the GPIO specifier which aligns with the presense of
the 'enable-active-high' property.

Fixes: 34993594181d ("arm64: tegra: Enable HDMI on Jetson TX1")
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rsi: release skb if rsi_prepare_beacon fails

commit d563131ef23cbc756026f839a82598c8445bc45f upstream.

In rsi_send_beacon, if rsi_prepare_beacon fails the allocated skb should
be released.

Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 5.3.15

net: fec: fix clock count mis-match

commit a31eda65ba210741b598044d045480494d0ed52a upstream.

pm_runtime_put_autosuspend in probe will call runtime suspend to
disable clks automatically if CONFIG_PM is defined. (If CONFIG_PM
is not defined, its implementation will be empty, then runtime
suspend will not be called.)

Therefore, we can call pm_runtime_get_sync to runtime resume it
first to enable clks, which matches the runtime suspend. (Only when
CONFIG_PM is defined, otherwise pm_runtime_get_sync will also be
empty, then runtime resume will not be called.)

Then it is fine to disable clks without causing clock count mis-match.

Fixes: c43eab3eddb4 ("net: fec: add missed clk_disable_unprepare in remove")
Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Acked-by: Fugang Duan <fugang.duan@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cc: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

platform/x86: hp-wmi: Fix ACPI errors caused by passing 0 as input size

commit f3e4f3fc8ee9729c4b1b27a478c68b713df53c0c upstream.

The AML code implementing the WMI methods creates a variable length
field to hold the input data we pass like this:

        CreateDWordField (Arg1, 0x0C, DSZI)
        Local5 = DSZI /* \HWMC.DSZI */
        CreateField (Arg1, 0x80, (Local5 * 0x08), DAIN)

If we pass 0 as bios_args.datasize argument then (Local5 * 0x08)
is 0 which results in these errors:

[   71.973305] ACPI BIOS Error (bug): Attempt to CreateField of length zero (20190816/dsopcode-133)
[   71.973332] ACPI Error: Aborting method \HWMC due to previous error (AE_AML_OPERAND_VALUE) (20190816/psparse-529)
[   71.973413] ACPI Error: Aborting method \_SB.WMID.WMAA due to previous error (AE_AML_OPERAND_VALUE) (20190816/psparse-529)

And in our HPWMI_WIRELESS2_QUERY calls always failing. for read commands
like HPWMI_WIRELESS2_QUERY the DSZI value is not used / checked, except for
read commands where extra input is needed to specify exactly what to read.

So for HPWMI_WIRELESS2_QUERY we can safely pass the size of the expected
output as insize to hp_wmi_perform_query(), as we are already doing for all
other HPWMI_READ commands we send. Doing so fixes these errors.

Cc: stable@vger.kernel.org
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=197007
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=201981
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1520703
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

platform/x86: hp-wmi: Fix ACPI errors caused by too small buffer

commit 16245db1489cd9aa579506f64afeeeb13d825a93 upstream.

The HP WMI calls may take up to 128 bytes of data as input, and
the AML methods implementing the WMI calls, declare a couple of fields for
accessing input in different sizes, specifycally the HWMC method contains:

        CreateField (Arg1, 0x80, 0x0400, D128)

Even though we do not use any of the WMI command-types which need a buffer
of this size, the APCI interpreter still tries to create it as it is
declared in generoc code at the top of the HWMC method which runs before
the code looks at which command-type is requested.

This results in many of these errors on many different HP laptop models:

[   14.459261] ACPI Error: Field [D128] at 1152 exceeds Buffer [NULL] size 160 (bits) (20170303/dsopcode-236)
[   14.459268] ACPI Error: Method parse/execution failed [\HWMC] (Node ffff8edcc61507f8), AE_AML_BUFFER_LIMIT (20170303/psparse-543)
[   14.459279] ACPI Error: Method parse/execution failed [\_SB.WMID.WMAA] (Node ffff8edcc61523c0), AE_AML_BUFFER_LIMIT (20170303/psparse-543)

This commit increases the size of the data element of the bios_args struct
to 128 bytes fixing these errors.

Cc: stable@vger.kernel.org
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=197007
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=201981
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1520703
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

HID: core: check whether Usage Page item is after Usage ID items

commit 1cb0d2aee26335d0bccf29100c7bed00ebece851 upstream.

Upstream commit 58e75155009c ("HID: core: move Usage Page concatenation
to Main item") adds support for Usage Page item after Usage ID items
(such as keyboards manufactured by Primax).

Usage Page concatenation in Main item works well for following report
descriptor patterns:

    USAGE_PAGE (Keyboard)                   05 07
    USAGE_MINIMUM (Keyboard LeftControl)    19 E0
    USAGE_MAXIMUM (Keyboard Right GUI)      29 E7
    LOGICAL_MINIMUM (0)                     15 00
    LOGICAL_MAXIMUM (1)                     25 01
    REPORT_SIZE (1)                         75 01
    REPORT_COUNT (8)                        95 08
    INPUT (Data,Var,Abs)                    81 02

-------------

    USAGE_MINIMUM (Keyboard LeftControl)    19 E0
    USAGE_MAXIMUM (Keyboard Right GUI)      29 E7
    LOGICAL_MINIMUM (0)                     15 00
    LOGICAL_MAXIMUM (1)                     25 01
    REPORT_SIZE (1)                         75 01
    REPORT_COUNT (8)                        95 08
    USAGE_PAGE (Keyboard)                   05 07
    INPUT (Data,Var,Abs)                    81 02

But it makes the parser act wrong for the following report
descriptor pattern(such as some Gamepads):

    USAGE_PAGE (Button)                     05 09
    USAGE (Button 1)                        09 01
    USAGE (Button 2)                        09 02
    USAGE (Button 4)                        09 04
    USAGE (Button 5)                        09 05
    USAGE (Button 7)                        09 07
    USAGE (Button 8)                        09 08
    USAGE (Button 14)                       09 0E
    USAGE (Button 15)                       09 0F
    USAGE (Button 13)                       09 0D
    USAGE_PAGE (Consumer Devices)           05 0C
    USAGE (Back)                            0a 24 02
    USAGE (HomePage)                        0a 23 02
    LOGICAL_MINIMUM (0)                     15 00
    LOGICAL_MAXIMUM (1)                     25 01
    REPORT_SIZE (1)                         75 01
    REPORT_COUNT (11)                       95 0B
    INPUT (Data,Var,Abs)                    81 02

With Usage Page concatenation in Main item, parser recognizes all the
11 Usages as consumer keys, it is not the HID device's real intention.

This patch checks whether Usage Page is really defined after Usage ID
items by comparing usage page using status.

Usage Page concatenation on currently defined Usage Page will always
do in local parsing when Usage ID items encountered.

When Main item is parsing, concatenation will do again with last
defined Usage Page if this page has not been used in the previous
usages concatenation.

Signed-off-by: Candle Sun <candle.sun@unisoc.com>
Signed-off-by: Nianfu Bai <nianfu.bai@unisoc.com>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Cc: Siarhei Vishniakou <svv@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: add more paranoia checking in ext4_expand_extra_isize handling

commit 4ea99936a1630f51fc3a2d61a58ec4a1c4b7d55a upstream.

It's possible to specify a non-zero s_want_extra_isize via debugging
option, and this can cause bad things(tm) to happen when using a file
system with an inode size of 128 bytes.

Add better checking when the file system is mounted, as well as when
we are actually doing the trying to do the inode expansion.

Link: https://lore.kernel.org/r/20191110121510.GH23325@mit.edu
Reported-by: syzbot+f8d6f8386ceacdbfff57@syzkaller.appspotmail.com
Reported-by: syzbot+33d7ea72e47de3bdf4e1@syzkaller.appspotmail.com
Reported-by: syzbot+44b6763edfc17144296f@syzkaller.appspotmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

selftests: pmtu: use -oneline for ip route list cache

[ Upstream commit 2745aea6750ff0d2c48285d25bdb00e5b636ec8b ]

Some versions of iproute2 will output more than one line per entry, which
will cause the test to fail, like:

TEST: ipv6: list and flush cached exceptions                        [FAIL]
  can't list cached exceptions

That happens, for example, with iproute2 4.15.0. When using the -oneline
option, this will work just fine:

TEST: ipv6: list and flush cached exceptions                        [ OK ]

This also works just fine with a more recent version of iproute2, like
5.4.0.

For some reason, two lines are printed for the IPv4 test no matter what
version of iproute2 is used. Use the same -oneline parameter there instead
of counting the lines twice.

Fixes: b964641e9925 ("selftests: pmtu: Make list_flush_ipv6_exception test more demanding")
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
Acked-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tipc: fix link name length check

[ Upstream commit fd567ac20cb0377ff466d3337e6e9ac5d0cb15e4 ]

In commit 4f07b80c9733 ("tipc: check msg->req data len in
tipc_nl_compat_bearer_disable") the same patch code was copied into
routines: tipc_nl_compat_bearer_disable(),
tipc_nl_compat_link_stat_dump() and tipc_nl_compat_link_reset_stats().
The two link routine occurrences should have been modified to check
the maximum link name length and not bearer name length.

Fixes: 4f07b80c9733 ("tipc: check msg->reg data len in tipc_nl_compat_bearer_disable")
Signed-off-by: John Rutherford <john.rutherford@dektech.com.au>
Acked-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>