xen/gntdev: Fix off-by-one error when unmapping with holes

[ Upstream commit 951a010233625b77cde3430b4b8785a9a22968d1 ]

If the requested range has a hole, the calculation of the number of
pages to unmap is off by one. Fix it.

Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

SolutionEngine771x: fix Ether platform data

[ Upstream commit 195e2addbce09e5afbc766efc1e6567c9ce840d3 ]

The 'sh_eth' driver's probe() method would fail  on the SolutionEngine7710
board and crash on SolutionEngine7712 board  as the platform code is
hopelessly behind the driver's platform data --  it passes the PHY address
instead of 'struct sh_eth_plat_data *'; pass the latter to the driver in
order to fix the bug...

Fixes: 71557a37adb5 ("[netdrvr] sh_eth: Add SH7619 support")
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mdio-sun4i: Fix a memory leak

[ Upstream commit 56c0290202ab94a2f2780c449395d4ae8495fab4 ]

If the probing of the regulator is deferred, the memory allocated by
'mdiobus_alloc_size()' will be leaking.
It should be freed before the next call to 'sun4i_mdio_probe()' which will
reallocate it.

Fixes: 4bdcb1dd9feb ("net: Add MDIO bus driver for the Allwinner EMAC")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xen-netfront: enable device after manual module load

[ Upstream commit b707fda2df4070785d0fa8a278aa13944c5f51f8 ]

When loading the module after unloading it, the network interface would
not be enabled and thus wouldn't have a backend counterpart and unable
to be used by the guest.

The guest would face errors like:

  [root@guest ~]# ethtool -i eth0
  Cannot get driver information: No such device

  [root@guest ~]# ifconfig eth0
  eth0: error fetching interface information: Device not found

This patch initializes the state of the netfront device whenever it is
loaded manually, this state would communicate the netback to create its
device and establish the connection between them.

Signed-off-by: Eduardo Otubo <otubo@redhat.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/ttm: check the return value of kzalloc

[ Upstream commit 19d859a7205bc59ffc38303eb25ae394f61d21dc ]

In the function ttm_page_alloc_init, kzalloc call is made for variable
_manager, we need to check its return value, it may return NULL.

Signed-off-by: Xiongwei Song <sxwjean@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

e1000: fix disabling already-disabled warning

[ Upstream commit 0b76aae741abb9d16d2c0e67f8b1e766576f897d ]

This patch adds check so that driver does not disable already
disabled device.

[   44.637743] advantechwdt: Unexpected close, not stopping watchdog!
[   44.997548] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input6
[   45.013419] e1000 0000:00:03.0: disabling already-disabled device
[   45.013447] ------------[ cut here ]------------
[   45.014868] WARNING: CPU: 1 PID: 71 at drivers/pci/pci.c:1641 pci_disable_device+0xa1/0x105:
pci_disable_device at drivers/pci/pci.c:1640
[   45.016171] CPU: 1 PID: 71 Comm: rcu_perf_shutdo Not tainted 4.14.0-01330-g3c07399 #1
[   45.017197] task: ffff88011bee9e40 task.stack: ffffc90000860000
[   45.017987] RIP: 0010:pci_disable_device+0xa1/0x105:
pci_disable_device at drivers/pci/pci.c:1640
[   45.018603] RSP: 0000:ffffc90000863e30 EFLAGS: 00010286
[   45.019282] RAX: 0000000000000035 RBX: ffff88013a230008 RCX: 0000000000000000
[   45.020182] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000203
[   45.021084] RBP: ffff88013a3f31e8 R08: 0000000000000001 R09: 0000000000000000
[   45.021986] R10: ffffffff827ec29c R11: 0000000000000002 R12: 0000000000000001
[   45.022946] R13: ffff88013a230008 R14: ffff880117802b20 R15: ffffc90000863e8f
[   45.023842] FS:  0000000000000000(0000) GS:ffff88013fd00000(0000) knlGS:0000000000000000
[   45.024863] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   45.025583] CR2: ffffc900006d4000 CR3: 000000000220f000 CR4: 00000000000006a0
[   45.026478] Call Trace:
[   45.026811]  __e1000_shutdown+0x1d4/0x1e2:
__e1000_shutdown at drivers/net/ethernet/intel/e1000/e1000_main.c:5162
[   45.027344]  ? rcu_perf_cleanup+0x2a1/0x2a1:
rcu_perf_shutdown at kernel/rcu/rcuperf.c:627
[   45.027883]  e1000_shutdown+0x14/0x3a:
e1000_shutdown at drivers/net/ethernet/intel/e1000/e1000_main.c:5235
[   45.028351]  device_shutdown+0x110/0x1aa:
device_shutdown at drivers/base/core.c:2807
[   45.028858]  kernel_power_off+0x31/0x64:
kernel_power_off at kernel/reboot.c:260
[   45.029343]  rcu_perf_shutdown+0x9b/0xa7:
rcu_perf_shutdown at kernel/rcu/rcuperf.c:637
[   45.029852]  ? __wake_up_common_lock+0xa2/0xa2:
autoremove_wake_function at kernel/sched/wait.c:376
[   45.030414]  kthread+0x126/0x12e:
kthread at kernel/kthread.c:233
[   45.030834]  ? __kthread_bind_mask+0x8e/0x8e:
kthread at kernel/kthread.c:190
[   45.031399]  ? ret_from_fork+0x1f/0x30:
ret_from_fork at arch/x86/entry/entry_64.S:443
[   45.031883]  ? kernel_init+0xa/0xf5:
kernel_init at init/main.c:997
[   45.032325]  ret_from_fork+0x1f/0x30:
ret_from_fork at arch/x86/entry/entry_64.S:443
[   45.032777] Code: 00 48 85 ed 75 07 48 8b ab a8 00 00 00 48 8d bb 98 00 00 00 e8 aa d1 11 00 48 89 ea 48 89 c6 48 c7 c7 d8 e4 0b 82 e8 55 7d da ff <0f> ff b9 01 00 00 00 31 d2 be 01 00 00 00 48 c7 c7 f0 b1 61 82
[   45.035222] ---[ end trace c257137b1b1976ef ]---
[   45.037838] ACPI: Preparing to enter system sleep state S5

Signed-off-by: Tushar Dave <tushar.n.dave@oracle.com>
Tested-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xfs: quota: check result of register_shrinker()

[ Upstream commit 3a3882ff26fbdbaf5f7e13f6a0bccfbf7121041d ]

xfs_qm_init_quotainfo() does not check result of register_shrinker()
which was tagged as __must_check recently, reported by sparse.

Signed-off-by: Aliaksei Karaliou <akaraliou.dev@gmail.com>
[darrick: move xfs_qm_destroy_quotainos nearer xfs_qm_init_quotainos]
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xfs: quota: fix missed destroy of qi_tree_lock

[ Upstream commit 2196881566225f3c3428d1a5f847a992944daa5b ]

xfs_qm_destroy_quotainfo() does not destroy quotainfo->qi_tree_lock
while destroys quotainfo->qi_quotaofflock.

Signed-off-by: Aliaksei Karaliou <akaraliou.dev@gmail.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390/dasd: fix wrongly assigned configuration data

[ Upstream commit 8a9bd4f8ebc6800bfc0596e28631ff6809a2f615 ]

We store per path and per device configuration data to identify the
path or device correctly. The per path configuration data might get
mixed up if the original request gets into error recovery and is
started with a random path mask.

This would lead to a wrong identification of a path in case of a CUIR
event for example.

Fix by copying the path mask from the original request to the error
recovery request in case it is a path verification request.

Signed-off-by: Stefan Haberland <sth@linux.vnet.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

led: core: Fix brightness setting when setting delay_off=0

[ Upstream commit 2b83ff96f51d0b039c4561b9f95c824d7bddb85c ]

With the current code, the following sequence won't work :
echo timer > trigger

echo 0 >  delay_off
* at this point we call
** led_delay_off_store
** led_blink_set

bnx2x: Improve reliability in case of nested PCI errors

[ Upstream commit f7084059a9cb9e56a186e1677b1dcffd76c2cd24 ]

While in recovery process of PCI error (called EEH on PowerPC arch),
another PCI transaction could be corrupted causing a situation of
nested PCI errors. Also, this scenario could be reproduced with
error injection mechanisms (for debug purposes).

We observe that in case of nested PCI errors, bnx2x might attempt to
initialize its shmem and cause a kernel crash due to bad addresses
read from MCP. Multiple different stack traces were observed depending
on the point the second PCI error happens.

This patch avoids the crashes by:

 * failing PCI recovery in case of nested errors (since multiple
 PCI errors in a row are not expected to lead to a functional
 adapter anyway), and by,

 * preventing access to adapter FW when MCP is failed (we mark it as
 failed when shmem cannot get initialized properly).

Reported-by: Abdul Haleem <abdhalee@linux.vnet.ibm.com>
Signed-off-by: Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com>
Acked-by: Shahed Shaikh <Shahed.Shaikh@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tg3: Enable PHY reset in MTU change path for 5720

[ Upstream commit e60ee41aaf898584205a6af5c996860d0fe6a836 ]

A customer noticed RX path hang when MTU is changed on the fly while
running heavy traffic with NCSI enabled for 5717 and 5719. Since 5720
belongs to same ASIC family, we observed same issue and same fix
could solve this problem for 5720.

Signed-off-by: Siva Reddy Kallam <siva.kallam@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tg3: Add workaround to restrict 5762 MRRS to 2048

[ Upstream commit 4419bb1cedcda0272e1dc410345c5a1d1da0e367 ]

One of AMD based server with 5762 hangs with jumbo frame traffic.
This AMD platform has southbridge limitation which is restricting MRRS
to 4000. As a work around, driver to restricts the MRRS to 2048 for
this particular 5762 NX1 card.

Signed-off-by: Siva Reddy Kallam <siva.kallam@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: storvsc: Fix scsi_cmd error assignments in storvsc_handle_error

[ Upstream commit d1b8b2391c24751e44f618fcf86fb55d9a9247fd ]

When an I/O is returned with an srb_status of SRB_STATUS_INVALID_LUN
which has zero good_bytes it must be assigned an error. Otherwise the
I/O will be continuously requeued and will cause a deadlock in the case
where disks are being hot added and removed. sd_probe_async will wait
forever for its I/O to complete while holding scsi_sd_probe_domain.

Also returning the default error of DID_TARGET_FAILURE causes multipath
to not retry the I/O resulting in applications receiving I/O errors
before a failover can occur.

Signed-off-by: Cathy Avery <cavery@redhat.com>
Signed-off-by: Long Li <longli@microsoft.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: arc_emac: fix arc_emac_rx() error paths

[ Upstream commit e688822d035b494071ecbadcccbd6f3325fb0f59 ]

arc_emac_rx() has some issues found by code review.

In case netdev_alloc_skb_ip_align() or dma_map_single() failure
rx fifo entry will not be returned to EMAC.

In case dma_map_single() failure previously allocated skb became
lost to driver. At the same time address of newly allocated skb
will not be provided to EMAC.

Signed-off-by: Alexander Kochetkov <al.kochet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

spi: atmel: fixed spin_lock usage inside atmel_spi_remove

[ Upstream commit 66e900a3d225575c8b48b59ae1fe74bb6e5a65cc ]

The only part of atmel_spi_remove which needs to be atomic is hardware
reset.

atmel_spi_stop_dma calls dma_terminate_all and this needs interrupts
enabled.
atmel_spi_release_dma calls dma_release_channel and dma_release_channel
locks a mutex inside of spin_lock.

So the call of these functions can't be inside a spin_lock.

Reported-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: Radu Pirea <radu.pirea@microchip.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sget(): handle failures of register_shrinker()

[ Upstream commit 9ee332d99e4d5a97548943b81c54668450ce641b ]

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipv6: icmp6: Allow icmp messages to be looped back

[ Upstream commit 588753f1eb18978512b1c9b85fddb457d46f9033 ]

One example of when an ICMPv6 packet is required to be looped back is
when a host acts as both a Multicast Listener and a Multicast Router.

A Multicast Router will listen on address ff02::16 for MLDv2 messages.

Currently, MLDv2 messages originating from a Multicast Listener running
on the same host as the Multicast Router are not being delivered to the
Multicast Router. This is due to dst.input being assigned the default
value of dst_discard.

This results in the packet being looped back but discarded before being
delivered to the Multicast Router.

This patch sets dst.input to ip6_input to ensure a looped back packet
is delivered to the Multicast Router.

Signed-off-by: Brendan McGrath <redmcg@redmandi.dyndns.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mtd: nand: gpmi: Fix failure when a erased page has a bitflip at BBM

[ Upstream commit fdf2e821052958a114618a95ab18a300d0b080cb ]

When erased subpages are read then the BCH decoder returns STATUS_ERASED
if they are all empty, or STATUS_UNCORRECTABLE if there are bitflips.
When there are bitflips, we have to set these bits again to show the
upper layers a completely erased page. When a bitflip happens in the
exact byte where the bad block marker is, then this byte is swapped
with another byte in block_mark_swapping(). The correction code then
detects a bitflip in another subpage and no longer corrects the bitflip
where it really happens.

Correct this behaviour by calling block_mark_swapping() after the
bitflips have been corrected.

In our case UBIFS failed with this bug because it expects erased
pages to be really empty:

UBIFS error (pid 187): ubifs_scan: corrupt empty space at LEB 36:118735
UBIFS error (pid 187): ubifs_scanned_corruption: corruption at LEB 36:118735
UBIFS error (pid 187): ubifs_scanned_corruption: first 8192 bytes from LEB 36:118735
UBIFS error (pid 187): ubifs_scan: LEB 36 scanning failed
UBIFS error (pid 187): do_commit: commit failed, error -117

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Reviewed-by: Richard Weinberger <richard@nod.at>
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

hrtimer: Ensure POSIX compliance (relative CLOCK_REALTIME hrtimers)

commit 48d0c9becc7f3c66874c100c126459a9da0fdced upstream.

The POSIX specification defines that relative CLOCK_REALTIME timers are not
affected by clock modifications. Those timers have to use CLOCK_MONOTONIC
to ensure POSIX compliance.

The introduction of the additional HRTIMER_MODE_PINNED mode broke this
requirement for pinned timers.

There is no user space visible impact because user space timers are not
using pinned mode, but for consistency reasons this needs to be fixed.

Check whether the mode has the HRTIMER_MODE_REL bit set instead of
comparing with HRTIMER_MODE_ABS.

Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de>
Cc: Christoph Hellwig <hch@lst.de>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: keescook@chromium.org
Fixes: 597d0275736d ("timers: Framework for identifying pinned timers")
Link: http://lkml.kernel.org/r/20171221104205.7269-7-anna-maria@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Mike Galbraith <efault@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipv6: Skip XFRM lookup if dst_entry in socket cache is valid

commit 00bc0ef5880dc7b82f9c320dead4afaad48e47be upstream.

At present we perform an xfrm_lookup() for each UDPv6 message we
send. The lookup involves querying the flow cache (flow_cache_lookup)
and, in case of a cache miss, creating an XFRM bundle.

If we miss the flow cache, we can end up creating a new bundle and
deriving the path MTU (xfrm_init_pmtu) from on an already transformed
dst_entry, which we pass from the socket cache (sk->sk_dst_cache) down
to xfrm_lookup(). This can happen only if we're caching the dst_entry
in the socket, that is when we're using a connected UDP socket.

To put it another way, the path MTU shrinks each time we miss the flow
cache, which later on leads to incorrectly fragmented payload. It can
be observed with ESPv6 in transport mode:

  1) Set up a transformation and lower the MTU to trigger fragmentation
    # ip xfrm policy add dir out src ::1 dst ::1 \
      tmpl src ::1 dst ::1 proto esp spi 1
    # ip xfrm state add src ::1 dst ::1 \
      proto esp spi 1 enc 'aes' 0x0b0b0b0b0b0b0b0b0b0b0b0b0b0b0b0b
    # ip link set dev lo mtu 1500

  2) Monitor the packet flow and set up an UDP sink
    # tcpdump -ni lo -ttt &
    # socat udp6-listen:12345,fork /dev/null &

  3) Send a datagram that needs fragmentation with a connected socket
    # perl -e 'print "@" x 1470 | socat - udp6:[::1]:12345
    2016/06/07 18:52:52 socat[724] E read(3, 0x555bb3d5ba00, 8192): Protocol error
    00:00:00.000000 IP6 ::1 > ::1: frag (0|1448) ESP(spi=0x00000001,seq=0x2), length 1448
    00:00:00.000014 IP6 ::1 > ::1: frag (1448|32)
    00:00:00.000050 IP6 ::1 > ::1: ESP(spi=0x00000001,seq=0x3), length 1272
    (^ ICMPv6 Parameter Problem)
    00:00:00.000022 IP6 ::1 > ::1: ESP(spi=0x00000001,seq=0x5), length 136

  4) Compare it to a non-connected socket
    # perl -e 'print "@" x 1500' | socat - udp6-sendto:[::1]:12345
    00:00:40.535488 IP6 ::1 > ::1: frag (0|1448) ESP(spi=0x00000001,seq=0x6), length 1448
    00:00:00.000010 IP6 ::1 > ::1: frag (1448|64)

What happens in step (3) is:

  1) when connecting the socket in __ip6_datagram_connect(), we
     perform an XFRM lookup, miss the flow cache, create an XFRM
     bundle, and cache the destination,

  2) afterwards, when sending the datagram, we perform an XFRM lookup,
     again, miss the flow cache (due to mismatch of flowi6_iif and
     flowi6_oif, which is an issue of its own), and recreate an XFRM
     bundle based on the cached (and already transformed) destination.

To prevent the recreation of an XFRM bundle, avoid an XFRM lookup
altogether whenever we already have a destination entry cached in the
socket. This prevents the path MTU shrinkage and brings us on par with
UDPv4.

The fix also benefits connected PINGv6 sockets, another user of
ip6_sk_dst_lookup_flow(), who also suffer messages being transformed
twice.

Joint work with Hannes Frederic Sowa.

Reported-by: Jan Tluka <jtluka@redhat.com>
Signed-off-by: Jakub Sitnicki <jkbs@redhat.com>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Benedict Wong <benedictwong@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 3.18.97

ASN.1: fix out-of-bounds read when parsing indefinite length item

commit e0058f3a874ebb48b25be7ff79bc3b4e59929f90 upstream.

In asn1_ber_decoder(), indefinitely-sized ASN.1 items were being passed
to the action functions before their lengths had been computed, using
the bogus length of 0x80 (ASN1_INDEFINITE_LENGTH).  This resulted in
reading data past the end of the input buffer, when given a specially
crafted message.

Fix it by rearranging the code so that the indefinite length is resolved
before the action is called.

This bug was originally found by fuzzing the X.509 parser in userspace
using libFuzzer from the LLVM project.

KASAN report (cleaned up slightly):

    BUG: KASAN: slab-out-of-bounds in memcpy ./include/linux/string.h:341 [inline]
    BUG: KASAN: slab-out-of-bounds in x509_fabricate_name.constprop.1+0x1a4/0x940 crypto/asymmetric_keys/x509_cert_parser.c:366
    Read of size 128 at addr ffff880035dd9eaf by task keyctl/195

    CPU: 1 PID: 195 Comm: keyctl Not tainted 4.14.0-09238-g1d3b78bbc6e9 #26
    Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-20171110_100015-anatol 04/01/2014
    Call Trace:
     __dump_stack lib/dump_stack.c:17 [inline]
     dump_stack+0xd1/0x175 lib/dump_stack.c:53
     print_address_description+0x78/0x260 mm/kasan/report.c:252
     kasan_report_error mm/kasan/report.c:351 [inline]
     kasan_report+0x23f/0x350 mm/kasan/report.c:409
     memcpy+0x1f/0x50 mm/kasan/kasan.c:302
     memcpy ./include/linux/string.h:341 [inline]
     x509_fabricate_name.constprop.1+0x1a4/0x940 crypto/asymmetric_keys/x509_cert_parser.c:366
     asn1_ber_decoder+0xb4a/0x1fd0 lib/asn1_decoder.c:447
     x509_cert_parse+0x1c7/0x620 crypto/asymmetric_keys/x509_cert_parser.c:89
     x509_key_preparse+0x61/0x750 crypto/asymmetric_keys/x509_public_key.c:174
     asymmetric_key_preparse+0xa4/0x150 crypto/asymmetric_keys/asymmetric_type.c:388
     key_create_or_update+0x4d4/0x10a0 security/keys/key.c:850
     SYSC_add_key security/keys/keyctl.c:122 [inline]
     SyS_add_key+0xe8/0x290 security/keys/keyctl.c:62
     entry_SYSCALL_64_fastpath+0x1f/0x96

    Allocated by task 195:
     __do_kmalloc_node mm/slab.c:3675 [inline]
     __kmalloc_node+0x47/0x60 mm/slab.c:3682
     kvmalloc ./include/linux/mm.h:540 [inline]
     SYSC_add_key security/keys/keyctl.c:104 [inline]
     SyS_add_key+0x19e/0x290 security/keys/keyctl.c:62
     entry_SYSCALL_64_fastpath+0x1f/0x96

Fixes: 42d5ec27f873 ("X.509: Add an ASN.1 decoder")
Reported-by: Alexander Potapenko <glider@google.com>
Cc: <stable@vger.kernel.org> # v3.7+
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: gadget: f_fs: Process all descriptors during bind

commit 6cf439e0d37463e42784271179c8a308fd7493c6 upstream.

During _ffs_func_bind(), the received descriptors are evaluated
to prepare for binding with the gadget in order to allocate
endpoints and optionally set up OS descriptors. However, the
high- and super-speed descriptors are only parsed based on
whether the gadget_is_dualspeed() and gadget_is_superspeed()
calls are true, respectively.

This is a problem in case a userspace program always provides
all of the {full,high,super,OS} descriptors when configuring a
function. Then, for example if a gadget device is not capable
of SuperSpeed, the call to ffs_do_descs() for the SS descriptors
is skipped, resulting in an incorrect offset calculation for
the vla_ptr when moving on to the OS descriptors that follow.
This causes ffs_do_os_descs() to fail as it is now looking at
the SS descriptors' offset within the raw_descs buffer instead.

_ffs_func_bind() should evaluate the descriptors unconditionally,
so remove the checks for gadget speed.

Fixes: f0175ab51993 ("usb: gadget: f_fs: OS descriptors support")
Cc: stable@vger.kernel.org
Co-Developed-by: Mayank Rana <mrana@codeaurora.org>
Signed-off-by: Mayank Rana <mrana@codeaurora.org>
Signed-off-by: Jack Pham <jackp@codeaurora.org>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: dwc3: gadget: Set maxpacket size for ep0 IN

commit 6180026341e852a250e1f97ebdcf71684a3c81b9 upstream.

There are 2 control endpoint structures for DWC3. However, the driver
only updates the OUT direction control endpoint structure during
ConnectDone event. DWC3 driver needs to update the endpoint max packet
size for control IN endpoint as well. If the max packet size is not
properly set, then the driver will incorrectly calculate the data
transfer size and fail to send ZLP for HS/FS 3-stage control read
transfer.

The fix is simply to update the max packet size for the ep0 IN direction
during ConnectDone event.

Cc: stable@vger.kernel.org
Fixes: 72246da40f37 ("usb: Introduce DesignWare USB3 DRD Driver")
Signed-off-by: Thinh Nguyen <thinhn@synopsys.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: Disable unhandled signal log messages by default

commit 5ee39a71fd89ab7240c5339d04161c44a8e03269 upstream.

aarch64 unhandled signal kernel messages are very verbose, suggesting
them to be more of a debugging aid:

sigsegv[33]: unhandled level 2 translation fault (11) at 0x00000000, esr
0x92000046, in sigsegv[400000+71000]
CPU: 1 PID: 33 Comm: sigsegv Tainted: G        W        4.15.0-rc3+ #3
Hardware name: linux,dummy-virt (DT)
pstate: 60000000 (nZCv daif -PAN -UAO)
pc : 0x4003f4
lr : 0x4006bc
sp : 0000fffffe94a060
x29: 0000fffffe94a070 x28: 0000000000000000
x27: 0000000000000000 x26: 0000000000000000
x25: 0000000000000000 x24: 00000000004001b0
x23: 0000000000486ac8 x22: 00000000004001c8
x21: 0000000000000000 x20: 0000000000400be8
x19: 0000000000400b30 x18: 0000000000484728
x17: 000000000865ffc8 x16: 000000000000270f
x15: 00000000000000b0 x14: 0000000000000002
x13: 0000000000000001 x12: 0000000000000000
x11: 0000000000000000 x10: 0008000020008008
x9 : 000000000000000f x8 : ffffffffffffffff
x7 : 0004000000000000 x6 : ffffffffffffffff
x5 : 0000000000000000 x4 : 0000000000000000
x3 : 00000000004003e4 x2 : 0000fffffe94a1e8
x1 : 000000000000000a x0 : 0000000000000000

Disable them by default, so they can be enabled using
/proc/sys/debug/exception-trace.

Cc: <stable@vger.kernel.org>
Signed-off-by: Michael Weiser <michael.weiser@gmx.de>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

irqchip/gic-v3: Use wmb() instead of smb_wmb() in gic_raise_softirq()

commit 21ec30c0ef5234fb1039cc7c7737d885bf875a9e upstream.

A DMB instruction can be used to ensure the relative order of only
memory accesses before and after the barrier. Since writes to system
registers are not memory operations, barrier DMB is not sufficient
for observability of memory accesses that occur before ICC_SGI1R_EL1
writes.

A DSB instruction ensures that no instructions that appear in program
order after the DSB instruction, can execute until the DSB instruction
has completed.

Cc: stable@vger.kernel.org
Acked-by: Will Deacon <will.deacon@arm.com>,
Signed-off-by: Shanker Donthineni <shankerd@codeaurora.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/oprofile: Fix bogus GCC-8 warning in nmi_setup()

commit 85c615eb52222bc5fab6c7190d146bc59fac289e upstream.

GCC-8 shows a warning for the x86 oprofile code that copies per-CPU
data from CPU 0 to all other CPUs, which when building a non-SMP
kernel turns into a memcpy() with identical source and destination
pointers:

 arch/x86/oprofile/nmi_int.c: In function 'mux_clone':
 arch/x86/oprofile/nmi_int.c:285:2: error: 'memcpy' source argument is the same as destination [-Werror=restrict]
   memcpy(per_cpu(cpu_msrs, cpu).multiplex,
   ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
          per_cpu(cpu_msrs, 0).multiplex,
          ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
          sizeof(struct op_msr) * model->num_virt_counters);
          ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 arch/x86/oprofile/nmi_int.c: In function 'nmi_setup':
 arch/x86/oprofile/nmi_int.c:466:3: error: 'memcpy' source argument is the same as destination [-Werror=restrict]
 arch/x86/oprofile/nmi_int.c:470:3: error: 'memcpy' source argument is the same as destination [-Werror=restrict]

I have analyzed a number of such warnings now: some are valid and the
GCC warning is welcome. Others turned out to be false-positives, and
GCC was changed to not warn about those any more. This is a corner case
that is a false-positive but the GCC developers feel it's better to keep
warning about it.

In this case, it seems best to work around it by telling GCC
a little more clearly that this code path is never hit with
an IS_ENABLED() configuration check.

Cc:stable as we also want old kernels to build cleanly with GCC-8.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Jessica Yu <jeyu@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Martin Sebor <msebor@gcc.gnu.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robert Richter <rric@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: oprofile-list@lists.sf.net
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/20180220205826.2008875-1-arnd@arndb.de
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=84095
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: adis_lib: Initialize trigger before requesting interrupt

commit f027e0b3a774e10302207e91d304bbf99e3a8b36 upstream.

The adis_probe_trigger() creates a new IIO trigger and requests an
interrupt associated with the trigger. The interrupt uses the generic
iio_trigger_generic_data_rdy_poll() function as its interrupt handler.

Currently the driver initializes some fields of the trigger structure after
the interrupt has been requested. But an interrupt can fire as soon as it
has been requested. This opens up a race condition.

iio_trigger_generic_data_rdy_poll() will access the trigger data structure
and dereference the ops field. If the ops field is not yet initialized this
will result in a NULL pointer deref.

It is not expected that the device generates an interrupt at this point, so
typically this issue did not surface unless e.g. due to a hardware
misconfiguration (wrong interrupt number, wrong polarity, etc.).

But some newer devices from the ADIS family start to generate periodic
interrupts in their power-on reset configuration and unfortunately the
interrupt can not be masked in the device.  This makes the race condition
much more visible and the following crash has been observed occasionally
when booting a system using the ADIS16460.

Unable to handle kernel NULL pointer dereference at virtual address 00000008
pgd = c0004000
[00000008] *pgd=00000000
Internal error: Oops: 5 [#1] PREEMPT SMP ARM
Modules linked in:
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.9.0-04126-gf9739f0-dirty #257
Hardware name: Xilinx Zynq Platform
task: ef04f640 task.stack: ef050000
PC is at iio_trigger_notify_done+0x30/0x68
LR is at iio_trigger_generic_data_rdy_poll+0x18/0x20
pc : [<c042d868>]    lr : [<c042d924>]    psr: 60000193
sp : ef051bb8  ip : 00000000  fp : ef106400
r10: c081d80a  r9 : ef3bfa00  r8 : 00000087
r7 : ef051bec  r6 : 00000000  r5 : ef3bfa00  r4 : ee92ab00
r3 : 00000000  r2 : 00000000  r1 : 00000000  r0 : ee97e400
Flags: nZCv  IRQs off  FIQs on  Mode SVC_32  ISA ARM  Segment none
Control: 18c5387d  Table: 0000404a  DAC: 00000051
Process swapper/0 (pid: 1, stack limit = 0xef050210)
[<c042d868>] (iio_trigger_notify_done) from [<c0065b10>] (__handle_irq_event_percpu+0x88/0x118)
[<c0065b10>] (__handle_irq_event_percpu) from [<c0065bbc>] (handle_irq_event_percpu+0x1c/0x58)
[<c0065bbc>] (handle_irq_event_percpu) from [<c0065c30>] (handle_irq_event+0x38/0x5c)
[<c0065c30>] (handle_irq_event) from [<c0068e28>] (handle_level_irq+0xa4/0x130)
[<c0068e28>] (handle_level_irq) from [<c0064e74>] (generic_handle_irq+0x24/0x34)
[<c0064e74>] (generic_handle_irq) from [<c021ab7c>] (zynq_gpio_irqhandler+0xb8/0x13c)
[<c021ab7c>] (zynq_gpio_irqhandler) from [<c0064e74>] (generic_handle_irq+0x24/0x34)
[<c0064e74>] (generic_handle_irq) from [<c0065370>] (__handle_domain_irq+0x5c/0xb4)
[<c0065370>] (__handle_domain_irq) from [<c000940c>] (gic_handle_irq+0x48/0x8c)
[<c000940c>] (gic_handle_irq) from [<c0013e8c>] (__irq_svc+0x6c/0xa8)

To fix this make sure that the trigger is fully initialized before
requesting the interrupt.

Fixes: ccd2b52f4ac6 ("staging:iio: Add common ADIS library")
Reported-by: Robin Getz <Robin.Getz@analog.com>
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: buffer: check if a buffer has been set up when poll is called

commit 4cd140bda6494543f1c1b0ccceceaa44b676eef6 upstream.

If no iio buffer has been set up and poll is called return 0.
Without this check there will be a null pointer dereference when
calling poll on a iio driver without an iio buffer.

Cc: stable@vger.kernel.org
Signed-off-by: Stefan Windfeldt-Prytz <stefan.windfeldt@axis.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cfg80211: fix cfg80211_beacon_dup

commit bee92d06157fc39d5d7836a061c7d41289a55797 upstream.

gcc-8 warns about some obviously incorrect code:

net/mac80211/cfg.c: In function 'cfg80211_beacon_dup':
net/mac80211/cfg.c:2896:3: error: 'memcpy' source argument is the same as destination [-Werror=restrict]

From the context, I conclude that we want to copy from beacon into
new_beacon, as we do in the rest of the function.

Cc: stable@vger.kernel.org
Fixes: 73da7d5bab79 ("mac80211: add channel switch command and beacon callbacks")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: ibmvfc: fix misdefined reserved field in ibmvfc_fcp_rsp_info

commit c39813652700f3df552b6557530f1e5f782dbe2f upstream.

The fcp_rsp_info structure as defined in the FC spec has an initial 3
bytes reserved field. The ibmvfc driver mistakenly defined this field as
4 bytes resulting in the rsp_code field being defined in what should be
the start of the second reserved field and thus always being reported as
zero by the driver.

Ideally, we should wire ibmvfc up with libfc for the sake of code
deduplication, and ease of maintaining standardized structures in a
single place. However, for now simply fixup the definition in ibmvfc for
backporting to distros on older kernels. Wiring up with libfc will be
done in a followup patch.

Cc: <stable@vger.kernel.org>
Reported-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI: keystone: Fix interrupt-controller-node lookup

commit eac56aa3bc8af3d9b9850345d0f2da9d83529134 upstream.

Fix child-node lookup during initialisation which was using the wrong
OF-helper and ended up searching the whole device tree depth-first
starting at the parent rather than just matching on its children.

To make things worse, the parent pci node could end up being prematurely
freed as of_find_node_by_name() drops a reference to its first argument.
Any matching child interrupt-controller node was also leaked.

Fixes: 0c4ffcfe1fbc ("PCI: keystone: Add TI Keystone PCIe driver")
Cc: stable <stable@vger.kernel.org> # 3.18
Acked-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
[lorenzo.pieralisi@arm.com: updated commit subject]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
[johan: backport to 4.4]
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netfilter: drop outermost socket lock in getsockopt()

commit 01ea306f2ac2baff98d472da719193e738759d93 upstream.

The Syzbot reported a possible deadlock in the netfilter area caused by
rtnl lock, xt lock and socket lock being acquired with a different order
on different code paths, leading to the following backtrace:
Reviewed-by: Xin Long <lucien.xin@gmail.com>
======================================================
WARNING: possible circular locking dependency detected
4.15.0+ #301 Not tainted
------------------------------------------------------
syzkaller233489/4179 is trying to acquire lock:
  (rtnl_mutex){+.+.}, at: [<0000000048e996fd>] rtnl_lock+0x17/0x20
net/core/rtnetlink.c:74

but task is already holding lock:
  (&xt[i].mutex){+.+.}, at: [<00000000328553a2>]
xt_find_table_lock+0x3e/0x3e0 net/netfilter/x_tables.c:1041

which lock already depends on the new lock.
===

Since commit 3f34cfae1230 ("netfilter: on sockopt() acquire sock lock
only in the required scope"), we already acquire the socket lock in
the innermost scope, where needed. In such commit I forgot to remove
the outer-most socket lock from the getsockopt() path, this commit
addresses the issues dropping it now.

v1 -> v2: fix bad subj, added relavant 'fixes' tag

Fixes: 22265a5c3c10 ("netfilter: xt_TEE: resolve oif using netdevice notifiers")
Fixes: 202f59afd441 ("netfilter: ipt_CLUSTERIP: do not hold dev")
Fixes: 3f34cfae1230 ("netfilter: on sockopt() acquire sock lock only in the required scope")
Reported-by: syzbot+ddde1c7b7ff7442d7f2d@syzkaller.appspotmail.com
Suggested-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Tested-by: Krzysztof Piotr Oledzki <ole@ans.pl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 3.18.96

crypto: s5p-sss - Fix kernel Oops in AES-ECB mode

commit c927b080c67e3e97193c81fc1d27f4251bf4e036 upstream.

In AES-ECB mode crypt is done with key only, so any use of IV
can cause kernel Oops. Use IV only in AES-CBC and AES-CTR.

Signed-off-by: Kamil Konieczny <k.konieczny@partner.samsung.com>
Reported-by: Anand Moon <linux.amoon@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Tested-by: Anand Moon <linux.amoon@gmail.com>
Cc: stable@vger.kernel.org # can be applied after commit 8f9702aad138
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: async_pf: Fix #DF due to inject "Page not Present" and "Page Ready" exceptions simultaneously

commit 9a6e7c39810e4a8bc7fc95056cefb40583fe07ef upstream.

qemu-system-x86-8600  [004] d..1  7205.687530: kvm_entry: vcpu 2
qemu-system-x86-8600  [004] ....  7205.687532: kvm_exit: reason EXCEPTION_NMI rip 0xffffffffa921297d info ffffeb2c0e44e018 80000b0e
qemu-system-x86-8600  [004] ....  7205.687532: kvm_page_fault: address ffffeb2c0e44e018 error_code 0
qemu-system-x86-8600  [004] ....  7205.687620: kvm_try_async_get_page: gva = 0xffffeb2c0e44e018, gfn = 0x427e4e
qemu-system-x86-8600  [004] .N..  7205.687628: kvm_async_pf_not_present: token 0x8b002 gva 0xffffeb2c0e44e018
    kworker/4:2-7814  [004] ....  7205.687655: kvm_async_pf_completed: gva 0xffffeb2c0e44e018 address 0x7fcc30c4e000
qemu-system-x86-8600  [004] ....  7205.687703: kvm_async_pf_ready: token 0x8b002 gva 0xffffeb2c0e44e018
qemu-system-x86-8600  [004] d..1  7205.687711: kvm_entry: vcpu 2

After running some memory intensive workload in guest, I catch the kworker
which completes the GUP too quickly, and queues an "Page Ready" #PF exception
after the "Page not Present" exception before the next vmentry as the above
trace which will result in #DF injected to guest.

This patch fixes it by clearing the queue for "Page not Present" if "Page Ready"
occurs before the next vmentry since the GUP has already got the required page
and shadow page table has already been fixed by "Page Ready" handler.

Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com>
Fixes: 7c90705bf2a3 ("KVM: Inject asynchronous page fault into a PV guest if page is swapped out.")
[Changed indentation and added clearing of injected. - Radim]
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
[port from upstream v4.14-rc1, Don't assign to kvm_queued_exception::injected or
 x86_exception::async_page_fault]
Signed-off-by: Jack Wang <jinpu.wang@profitbricks.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

hippi: Fix a Fix a possible sleep-in-atomic bug in rr_close

[ Upstream commit 6e266610eb6553cfb7e7eb5d11914bd01509c406 ]

The driver may sleep under a spinlock.
The function call path is:
rr_close (acquire the spinlock)
  free_irq --> may sleep

To fix it, free_irq is moved to the place without holding the spinlock.

This bug is found by my static analysis tool(DSAC) and checked by my code review.

Signed-off-by: Jia-Ju Bai <baijiaju1990@163.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xen: XEN_ACPI_PROCESSOR is Dom0-only

[ Upstream commit c4f9d9cb2c29ff04c6b4bb09b72802d8aedfc7cb ]

Add a respective dependency.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/mm/kmmio: Fix mmiotrace for page unaligned addresses

[ Upstream commit 6d60ce384d1d5ca32b595244db4077a419acc687 ]

If something calls ioremap() with an address not aligned to PAGE_SIZE, the
returned address might be not aligned as well. This led to a probe
registered on exactly the returned address, but the entire page was armed
for mmiotracing.

On calling iounmap() the address passed to unregister_kmmio_probe() was
PAGE_SIZE aligned by the caller leading to a complete freeze of the
machine.

We should always page align addresses while (un)registerung mappings,
because the mmiotracer works on top of pages, not mappings. We still keep
track of the probes based on their real addresses and lengths though,
because the mmiotrace still needs to know what are mapped memory regions.

Also move the call to mmiotrace_iounmap() prior page aligning the address,
so that all probes are unregistered properly, otherwise the kernel ends up
failing memory allocations randomly after disabling the mmiotracer.

Tested-by: Lyude <lyude@redhat.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Acked-by: Pekka Paalanen <ppaalanen@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: nouveau@lists.freedesktop.org
Link: http://lkml.kernel.org/r/20171127075139.4928-1-kherbst@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm/early_ioremap: Fix boot hang with earlyprintk=efi,keep

[ Upstream commit 7f6f60a1ba52538c16f26930bfbcfe193d9d746a ]

earlyprintk=efi,keep does not work any more with a warning
in mm/early_ioremap.c: WARN_ON(system_state != SYSTEM_BOOTING):
Boot just hangs because of the earlyprintk within the earlyprintk
implementation code itself.

This is caused by a new introduced middle state in:

  69a78ff226fe ("init: Introduce SYSTEM_SCHEDULING state")

early_ioremap() is fine in both SYSTEM_BOOTING and SYSTEM_SCHEDULING
states, original condition should be updated accordingly.

Signed-off-by: Dave Young <dyoung@redhat.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: bp@suse.de
Cc: linux-efi@vger.kernel.org
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/20171209041610.GA3249@dhcp-128-65.nay.redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dmaengine: jz4740: disable/unprepare clk if probe fails

[ Upstream commit eb9436966fdc84cebdf222952a99898ab46d9bb0 ]

in error path of jz4740_dma_probe(), call clk_disable_unprepare() to clean
up.

Found by Linux Driver Verification project (linuxtesting.org).

Fixes: 25ce6c35fea0 MIPS: jz4740: Remove custom DMA API
Signed-off-by: Tobias Jordan <Tobias.Jordan@elektrobit.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xfrm: Fix stack-out-of-bounds with misconfigured transport mode policies.

[ Upstream commit 732706afe1cc46ef48493b3d2b69c98f36314ae4 ]

On policies with a transport mode template, we pass the addresses
from the flowi to xfrm_state_find(), assuming that the IP addresses
(and address family) don't change during transformation.

Unfortunately our policy template validation is not strict enough.
It is possible to configure policies with transport mode template
where the address family of the template does not match the selectors
address family. This lead to stack-out-of-bound reads because
we compare arddesses of the wrong family. Fix this by refusing
such a configuration, address family can not change on transport
mode.

We use the assumption that, on transport mode, the first templates
address family must match the address family of the policy selector.
Subsequent transport mode templates must mach the address family of
the previous template.

Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

spi: sun4i: disable clocks in the remove function

[ Upstream commit c810daba0ab5226084a56893a789af427a801146 ]

mclk and hclk need to be disabled. Since pm_runtime_disable does
not disable the clocks, use pm_runtime_force_suspend instead.

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Takuo Koguchi <takuo.koguchi.sw@hitachi.com>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

509: fix printing uninitialized stack memory when OID is empty

[ Upstream commit 8dfd2f22d3bf3ab7714f7495ad5d897b8845e8c1 ]

Callers of sprint_oid() do not check its return value before printing
the result.  In the case where the OID is zero-length, -EBADMSG was
being returned without anything being written to the buffer, resulting
in uninitialized stack memory being printed.  Fix this by writing
"(bad)" to the buffer in the cases where -EBADMSG is returned.

Fixes: 4f73175d0375 ("X.509: Add utility functions to render OIDs as strings")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: Fix possible off-by-one in btrfs_search_path_in_tree

[ Upstream commit c8bcbfbd239ed60a6562964b58034ac8a25f4c31 ]

The name char array passed to btrfs_search_path_in_tree is of size
BTRFS_INO_LOOKUP_PATH_MAX (4080). So the actual accessible char indexes
are in the range of [0, 4079]. Currently the code uses the define but this
represents an off-by-one.

Implications:

Size of btrfs_ioctl_ino_lookup_args is 4096, so the new byte will be
written to extra space, not some padding that could be provided by the
allocator.

btrfs-progs store the arguments on stack, but kernel does own copy of
the ioctl buffer and the off-by-one overwrite does not affect userspace,
but the ending 0 might be lost.

Kernel ioctl buffer is allocated dynamically so we're overwriting
somebody else's memory, and the ioctl is privileged if args.objectid is
not 256. Which is in most cases, but resolving a subvolume stored in
another directory will trigger that path.

Before this patch the buffer was one byte larger, but then the -1 was
not added.

Fixes: ac8e9819d71f907 ("Btrfs: add search and inode lookup ioctls")
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ added implications ]
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net_sched: red: Avoid illegal values

[ Upstream commit 8afa10cbe281b10371fee5a87ab266e48d71a7f9 ]

Check the qmin & qmax values doesn't overflow for the given Wlog value.
Check that qmin <= qmax.

Fixes: a783474591f2 ("[PKT_SCHED]: Generic RED layer")
Signed-off-by: Nogah Frankel <nogahf@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net_sched: red: Avoid devision by zero

[ Upstream commit 5c472203421ab4f928aa1ae9e1dbcfdd80324148 ]

Do not allow delta value to be zero since it is used as a divisor.

Fixes: 8af2a218de38 ("sch_red: Adaptative RED AQM")
Signed-off-by: Nogah Frankel <nogahf@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

gianfar: fix a flooded alignment reports because of padding issue.

[ Upstream commit 58117672943734715bbe7565ac9f062effa524f0 ]

According to LS1021A RM, the value of PAL can be set so that the start of the
IP header in the receive data buffer is aligned to a 32-bit boundary. Normally,
setting PAL = 2 provides minimal padding to ensure such alignment of the IP
header.

However every incoming packet's 8-byte time stamp will be inserted into the
packet data buffer as padding alignment bytes when hardware time stamping is
enabled.

So we set the padding 8+2 here to avoid the flooded alignment faults:

root@128:~# cat /proc/cpu/alignment
User:           0
System:         17539 (inet_gro_receive+0x114/0x2c0)
Skipped:        0
Half:           0
Word:           0
DWord:          0
Multi:          17539
User faults:    2 (fixup)

Also shown when exception report enablement

CPU: 0 PID: 161 Comm: irq/66-eth1_g0_ Not tainted 4.1.21-rt13-WR8.0.0.0_preempt-rt #16
Hardware name: Freescale LS1021A
[<8001b420>] (unwind_backtrace) from [<8001476c>] (show_stack+0x20/0x24)
[<8001476c>] (show_stack) from [<807cfb48>] (dump_stack+0x94/0xac)
[<807cfb48>] (dump_stack) from [<80025d70>] (do_alignment+0x720/0x958)
[<80025d70>] (do_alignment) from [<80009224>] (do_DataAbort+0x40/0xbc)
[<80009224>] (do_DataAbort) from [<80015398>] (__dabt_svc+0x38/0x60)
Exception stack(0x86ad1cc0 to 0x86ad1d08)
1cc0: f9b3e080 86b3d072 2d78d287 00000000 866816c0 86b3d05e 86e785d0 00000000
1ce0: 00000011 0000000e 80840ab0 86ad1d3c 86ad1d08 86ad1d08 806d7fc0 806d806c
1d00: 40070013 ffffffff
[<80015398>] (__dabt_svc) from [<806d806c>] (inet_gro_receive+0x114/0x2c0)
[<806d806c>] (inet_gro_receive) from [<80660eec>] (dev_gro_receive+0x21c/0x3c0)
[<80660eec>] (dev_gro_receive) from [<8066133c>] (napi_gro_receive+0x44/0x17c)
[<8066133c>] (napi_gro_receive) from [<804f0538>] (gfar_clean_rx_ring+0x39c/0x7d4)
[<804f0538>] (gfar_clean_rx_ring) from [<804f0bf4>] (gfar_poll_rx_sq+0x58/0xe0)
[<804f0bf4>] (gfar_poll_rx_sq) from [<80660b10>] (net_rx_action+0x27c/0x43c)
[<80660b10>] (net_rx_action) from [<80033638>] (do_current_softirqs+0x1e0/0x3dc)
[<80033638>] (do_current_softirqs) from [<800338c4>] (__local_bh_enable+0x90/0xa8)
[<800338c4>] (__local_bh_enable) from [<8008025c>] (irq_forced_thread_fn+0x70/0x84)
[<8008025c>] (irq_forced_thread_fn) from [<800805e8>] (irq_thread+0x16c/0x244)
[<800805e8>] (irq_thread) from [<8004e490>] (kthread+0xe8/0x104)
[<8004e490>] (kthread) from [<8000fda8>] (ret_from_fork+0x14/0x2c)

Signed-off-by: Zumeng Chen <zumeng.chen@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390/dasd: prevent prefix I/O error

[ Upstream commit da340f921d3454f1521671c7a5a43ad3331fbe50 ]

Prevent that a prefix flag is set based on invalid configuration data.
The validity.verify_base flag should only be set for alias devices.
Usually the unit address type is either one of base, PAV alias or
HyperPAV alias. But in cases where the unit address type is not set or
any other value the validity.verify_base flag might be set as well.
This would lead to follow on errors.
Explicitly check for alias devices and set the validity flag only for
them.

Signed-off-by: Stefan Haberland <sth@linux.vnet.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/perf: Fix oops when grouping different pmu events

[ Upstream commit 5aa04b3eb6fca63d2e9827be656dcadc26d54e11 ]

When user tries to group imc (In-Memory Collections) event with
normal event, (sometime) kernel crashes with following log:

    Faulting instruction address: 0x00000000
    [link register   ] c00000000010ce88 power_check_constraints+0x128/0x980
    ...
    c00000000010e238 power_pmu_event_init+0x268/0x6f0
    c0000000002dc60c perf_try_init_event+0xdc/0x1a0
    c0000000002dce88 perf_event_alloc+0x7b8/0xac0
    c0000000002e92e0 SyS_perf_event_open+0x530/0xda0
    c00000000000b004 system_call+0x38/0xe0

'event_base' field of 'struct hw_perf_event' is used as flags for
normal hw events and used as memory address for imc events. While
grouping these two types of events, collect_events() tries to
interpret imc 'event_base' as a flag, which causes a corruption
resulting in a crash.

Consider only those events which belongs to 'perf_hw_context' in
collect_events().

Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Reviewed-By: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scripts/kernel-doc: Don't fail with status != 0 if error encountered with -none

[ Upstream commit e814bccbafece52a24e152d2395b5d49eef55841 ]

My bisect scripts starting running into build failures when trying to
compile 4.15-rc1 with the builds failing with things like:

drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c:2078: error: Cannot parse struct or union!

The line in question is actually just a #define, but after some digging
it turns out that my scripts pass W=1 and since commit 3a025e1d1c2ea
("Add optional check for bad kernel-doc comments") that results in
kernel-doc running on each source file. The file in question has a
badly formatted comment immediately before the #define:

/**
 * struct brcmf_skbuff_cb reserves first two bytes in sk_buff::cb for
 * bus layer usage.
 */

which causes the regex in dump_struct to fail (lack of braces following
struct declaration) and kernel-doc returns 1, which causes the build
to fail.

Fix the issue by always returning 0 from kernel-doc when invoked with
-none. It successfully generates no documentation, and prints out any
issues.

Cc: Matthew Wilcox <mawilcox@microsoft.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: s5k6aa: describe some function parameters

[ Upstream commit 070250a1715cee2297de0d9e7e2cea58be999d37 ]

as warned:
  drivers/media/i2c/s5k6aa.c:429: warning: No description found for parameter 's5k6aa'
  drivers/media/i2c/s5k6aa.c:679: warning: No description found for parameter 's5k6aa'
  drivers/media/i2c/s5k6aa.c:733: warning: No description found for parameter 's5k6aa'
  drivers/media/i2c/s5k6aa.c:733: warning: No description found for parameter 'preset'
  drivers/media/i2c/s5k6aa.c:787: warning: No description found for parameter 'sd'

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf bench numa: Fixup discontiguous/sparse numa nodes

[ Upstream commit 321a7c35c90cc834851ceda18a8ee18f1d032b92 ]

Certain systems are designed to have sparse/discontiguous nodes.  On
such systems, 'perf bench numa' hangs, shows wrong number of nodes and
shows values for non-existent nodes. Handle this by only taking nodes
that are exposed by kernel to userspace.

Signed-off-by: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com>
Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Acked-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/1edbcd353c009e109e93d78f2f46381930c340fe.1511368645.git.sathnaga@linux.vnet.ibm.com
Signed-off-by: Balamuruhan S <bala24@linux.vnet.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf top: Fix window dimensions change handling

[ Upstream commit 89d0aeab4252adc2a7ea693637dd21c588bfa2d1 ]

The stdio perf top crashes when we change the terminal
window size. The reason is that we assumed we get the
perf_top pointer as a signal handler argument which is
not the case.

Changing the SIGWINCH handler logic to change global
resize variable, which is checked in the main thread
loop.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-ysuzwz77oev1ftgvdscn9bpu@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: dts: am4372: Correct the interrupts_properties of McASP

[ Upstream commit 627395a6f8091c0aa18f49dca7df59ba3ec147ef ]

Fixes the following warnings:

arch/arm/boot/dts/am437x-cm-t43.dtb: Warning (interrupts_property):
interrupts size is (8), expected multiple of 12 in
/ocp@44000000/mcasp@48038000

arch/arm/boot/dts/am437x-cm-t43.dtb: Warning (interrupts_property):
interrupts size is (8), expected multiple of 12 in
/ocp@44000000/mcasp@4803C000

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: AM33xx: PRM: Remove am33xx_pwrdm_read_prev_pwrst function

[ Upstream commit b6d6af7226465b6d11eac09d0be2ab78a4a9eb62 ]

Referring TRM Am335X series:
http://www.ti.com/lit/ug/spruh73p/spruh73p.pdf

The LastPowerStateEntered bitfield is present only for PM_CEFUSE
domain. This is not present in any of the other power domains. Hence
remove the generic am33xx_pwrdm_read_prev_pwrst hook which wrongly
reads the reserved bit fields for all the other power domains.

Reading the reserved bits leads to wrongly interpreting the low
power transitions for various power domains that do not have the
LastPowerStateEntered field. The pm debug counters values are wrong
currently as we are incrementing them based on the reserved bits.

Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: build drivers/usb/common/ when USB_SUPPORT is set

[ Upstream commit c9d24f78268be444e803fb2bb138a2f598de9c23 ]

PHY drivers can use ULPI interfaces when CONFIG_USB (which is host side
support) is not enabled, so also build drivers/usb/ when CONFIG_USB_SUPPORT
is enabled so that drivers/usb/common/ is built.

ERROR: "ulpi_unregister_driver" [drivers/phy/ti/phy-tusb1210.ko] undefined!
ERROR: "__ulpi_register_driver" [drivers/phy/ti/phy-tusb1210.ko] undefined!
ERROR: "ulpi_read" [drivers/phy/ti/phy-tusb1210.ko] undefined!
ERROR: "ulpi_write" [drivers/phy/ti/phy-tusb1210.ko] undefined!
ERROR: "ulpi_unregister_driver" [drivers/phy/qualcomm/phy-qcom-usb-hs.ko] undefined!
ERROR: "__ulpi_register_driver" [drivers/phy/qualcomm/phy-qcom-usb-hs.ko] undefined!
ERROR: "ulpi_write" [drivers/phy/qualcomm/phy-qcom-usb-hs.ko] undefined!

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usbip: keep usbip_device sockfd state in sync with tcp_socket

commit 009f41aed4b3e11e6dc1e3c07377a10c20f1a5ed upstream.

Keep usbip_device sockfd state in sync with tcp_socket. When tcp_socket
is reset to null, reset sockfd to -1 to keep it in sync.

Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dn_getsockoptdecnet: move nf_{get/set}sockopt outside sock lock

commit dfec091439bb2acf763497cfc58f2bdfc67c56b7 upstream.

After commit 3f34cfae1238 ("netfilter: on sockopt() acquire sock lock
only in the required scope"), the caller of nf_{get/set}sockopt() must
not hold any lock, but, in such changeset, I forgot to cope with DECnet.

This commit addresses the issue moving the nf call outside the lock,
in the dn_{get,set}sockopt() with the same schema currently used by
ipv4 and ipv6. Also moves the unhandled sockopts of the end of the main
switch statements, to improve code readability.

Reported-by: Petr Vandrovec <petr@vandrovec.name>
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=198791#c2
Fixes: 3f34cfae1238 ("netfilter: on sockopt() acquire sock lock only in the required scope")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

video: fbdev/mmp: add MODULE_LICENSE

commit c1530ac5a3ce93a1f02adabc4508b5fbf862dfe2 upstream.

Kbuild complains about the lack of a license tag in this driver:

WARNING: modpost: missing MODULE_LICENSE() in drivers/video/fbdev/mmp/mmp_disp.o

This adds the license, author and description tags.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: ux500: add MODULE_LICENSE tag

commit 1783c9d7cb7bc3181b9271665959b87280d98d8e upstream.

This adds MODULE_LICENSE/AUTHOR/DESCRIPTION tags to the ux500
platform drivers, to avoid these build warnings:

WARNING: modpost: missing MODULE_LICENSE() in sound/soc/ux500/snd-soc-ux500-plat-dma.o
WARNING: modpost: missing MODULE_LICENSE() in sound/soc/ux500/snd-soc-ux500-mach-mop500.o

The company no longer exists, so the email addresses of the authors
don't work any more, but I've added them anyway for consistency.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

selinux: ensure the context is NUL terminated in security_context_to_sid_core()

commit ef28df55ac27e1e5cd122e19fa311d886d47a756 upstream.

The syzbot/syzkaller automated tests found a problem in
security_context_to_sid_core() during early boot (before we load the
SELinux policy) where we could potentially feed context strings without
NUL terminators into the strcmp() function.

We already guard against this during normal operation (after the SELinux
policy has been loaded) by making a copy of the context strings and
explicitly adding a NUL terminator to the end.  The patch extends this
protection to the early boot case (no loaded policy) by moving the context
copy earlier in security_context_to_sid_core().

Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Reviewed-By: William Roberts <william.c.roberts@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Provide a function to create a NUL-terminated string from unterminated data

commit f35157417215ec138c920320c746fdb3e04ef1d5 upstream.

Provide a function, kmemdup_nul(), that will create a NUL-terminated string
from an unterminated character array where the length is known in advance.

This is better than kstrndup() in situations where we already know the
string length as the strnlen() in kstrndup() is superfluous.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: avoid skb_warn_bad_offload on IS_ERR

commit 8d74e9f88d65af8bb2e095aff506aa6eac755ada upstream.

skb_warn_bad_offload warns when packets enter the GSO stack that
require skb_checksum_help or vice versa. Do not warn on arbitrary
bad packets. Packet sockets can craft many. Syzkaller was able to
demonstrate another one with eth_type games.

In particular, suppress the warning when segmentation returns an
error, which is for reasons other than checksum offload.

See also commit 36c92474498a ("net: WARN if skb_checksum_help() is
called on skb requiring segmentation") for context on this warning.

Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netfilter: xt_RATEEST: acquire xt_rateest_mutex for hash insert

commit 7dc68e98757a8eccf8ca7a53a29b896f1eef1f76 upstream.

rateest_hash is supposed to be protected by xt_rateest_mutex,
and, as suggested by Eric, lookup and insert should be atomic,
so we should acquire the xt_rateest_mutex once for both.

So introduce a non-locking helper for internal use and keep the
locking one for external.

Reported-by: <syzbot+5cb189720978275e4c75@syzkaller.appspotmail.com>
Fixes: 5859034d7eb8 ("[NETFILTER]: x_tables: add RATEEST target")
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Reviewed-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netfilter: on sockopt() acquire sock lock only in the required scope

commit 3f34cfae1238848fd53f25e5c8fd59da57901f4b upstream.

Syzbot reported several deadlocks in the netfilter area caused by
rtnl lock and socket lock being acquired with a different order on
different code paths, leading to backtraces like the following one:

======================================================
WARNING: possible circular locking dependency detected
4.15.0-rc9+ #212 Not tainted
------------------------------------------------------
syzkaller041579/3682 is trying to acquire lock:
  (sk_lock-AF_INET6){+.+.}, at: [<000000008775e4dd>] lock_sock
include/net/sock.h:1463 [inline]
  (sk_lock-AF_INET6){+.+.}, at: [<000000008775e4dd>]
do_ipv6_setsockopt.isra.8+0x3c5/0x39d0 net/ipv6/ipv6_sockglue.c:167

but task is already holding lock:
  (rtnl_mutex){+.+.}, at: [<000000004342eaa9>] rtnl_lock+0x17/0x20
net/core/rtnetlink.c:74

which lock already depends on the new lock.

the existing dependency chain (in reverse order) is:

-> #1 (rtnl_mutex){+.+.}:
        __mutex_lock_common kernel/locking/mutex.c:756 [inline]
        __mutex_lock+0x16f/0x1a80 kernel/locking/mutex.c:893
        mutex_lock_nested+0x16/0x20 kernel/locking/mutex.c:908
        rtnl_lock+0x17/0x20 net/core/rtnetlink.c:74
        register_netdevice_notifier+0xad/0x860 net/core/dev.c:1607
        tee_tg_check+0x1a0/0x280 net/netfilter/xt_TEE.c:106
        xt_check_target+0x22c/0x7d0 net/netfilter/x_tables.c:845
        check_target net/ipv6/netfilter/ip6_tables.c:538 [inline]
        find_check_entry.isra.7+0x935/0xcf0
net/ipv6/netfilter/ip6_tables.c:580
        translate_table+0xf52/0x1690 net/ipv6/netfilter/ip6_tables.c:749
        do_replace net/ipv6/netfilter/ip6_tables.c:1165 [inline]
        do_ip6t_set_ctl+0x370/0x5f0 net/ipv6/netfilter/ip6_tables.c:1691
        nf_sockopt net/netfilter/nf_sockopt.c:106 [inline]
        nf_setsockopt+0x67/0xc0 net/netfilter/nf_sockopt.c:115
        ipv6_setsockopt+0x115/0x150 net/ipv6/ipv6_sockglue.c:928
        udpv6_setsockopt+0x45/0x80 net/ipv6/udp.c:1422
        sock_common_setsockopt+0x95/0xd0 net/core/sock.c:2978
        SYSC_setsockopt net/socket.c:1849 [inline]
        SyS_setsockopt+0x189/0x360 net/socket.c:1828
        entry_SYSCALL_64_fastpath+0x29/0xa0

-> #0 (sk_lock-AF_INET6){+.+.}:
        lock_acquire+0x1d5/0x580 kernel/locking/lockdep.c:3914
        lock_sock_nested+0xc2/0x110 net/core/sock.c:2780
        lock_sock include/net/sock.h:1463 [inline]
        do_ipv6_setsockopt.isra.8+0x3c5/0x39d0 net/ipv6/ipv6_sockglue.c:167
        ipv6_setsockopt+0xd7/0x150 net/ipv6/ipv6_sockglue.c:922
        udpv6_setsockopt+0x45/0x80 net/ipv6/udp.c:1422
        sock_common_setsockopt+0x95/0xd0 net/core/sock.c:2978
        SYSC_setsockopt net/socket.c:1849 [inline]
        SyS_setsockopt+0x189/0x360 net/socket.c:1828
        entry_SYSCALL_64_fastpath+0x29/0xa0

other info that might help us debug this:

  Possible unsafe locking scenario:

        CPU0                    CPU1
        ----                    ----
   lock(rtnl_mutex);
                                lock(sk_lock-AF_INET6);
                                lock(rtnl_mutex);
   lock(sk_lock-AF_INET6);

  *** DEADLOCK ***

1 lock held by syzkaller041579/3682:
  #0:  (rtnl_mutex){+.+.}, at: [<000000004342eaa9>] rtnl_lock+0x17/0x20
net/core/rtnetlink.c:74

The problem, as Florian noted, is that nf_setsockopt() is always
called with the socket held, even if the lock itself is required only
for very tight scopes and only for some operation.

This patch addresses the issues moving the lock_sock() call only
where really needed, namely in ipv*_getorigdst(), so that nf_setsockopt()
does not need anymore to acquire both locks.

Fixes: 22265a5c3c10 ("netfilter: xt_TEE: resolve oif using netdevice notifiers")
Reported-by: syzbot+a4c2dc980ac1af699b36@syzkaller.appspotmail.com
Suggested-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netfilter: ipt_CLUSTERIP: fix out-of-bounds accesses in clusterip_tg_check()

commit 1a38956cce5eabd7b74f94bab70265e4df83165e upstream.

Commit 136e92bbec0a switched local_nodes from an array to a bitmask
but did not add proper bounds checks. As the result
clusterip_config_init_nodelist() can both over-read
ipt_clusterip_tgt_info.local_nodes and over-write
clusterip_config.local_nodes.

Add bounds checks for both.

Fixes: 136e92bbec0a ("[NETFILTER] CLUSTERIP: use a bitmap to store node responsibility data")
Signed-off-by: Dmitry Vyukov <dvyukov@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netfilter: x_tables: avoid out-of-bounds reads in xt_request_find_{match|target}

commit da17c73b6eb74aad3c3c0654394635675b623b3e upstream.

It looks like syzbot found its way into netfilter territory.

Issue here is that @name comes from user space and might
not be null terminated.

Out-of-bound reads happen, KASAN is not happy.

v2 added similar fix for xt_request_find_target(),
as Florian advised.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netfilter: x_tables: fix int overflow in xt_alloc_table_info()

commit 889c604fd0b5f6d3b8694ade229ee44124de1127 upstream.

syzkaller triggered OOM kills by passing ipt_replace.size = -1
to IPT_SO_SET_REPLACE. The root cause is that SMP_ALIGN() in
xt_alloc_table_info() causes int overflow and the size check passes
when it should not. SMP_ALIGN() is no longer needed leftover.

Remove SMP_ALIGN() call in xt_alloc_table_info().

Reported-by: syzbot+4396883fa8c4f64e0175@syzkaller.appspotmail.com
Signed-off-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto: x86/twofish-3way - Fix %rbp usage

commit d8c7fe9f2a486a6e5f0d5229ca43807af5ab22c6 upstream.

Using %rbp as a temporary register breaks frame pointer convention and
breaks stack traces when unwinding from an interrupt in the crypto code.

In twofish-3way, we can't simply replace %rbp with another register
because there are none available.  Instead, we use the stack to hold the
values that %rbp, %r11, and %r12 were holding previously.  Each of these
values represents the half of the output from the previous Feistel round
that is being passed on unchanged to the following round.  They are only
used once per round, when they are exchanged with %rax, %rbx, and %rcx.

As a result, we free up 3 registers (one per block) and can reassign
them so that %rbp is not used, and additionally %r14 and %r15 are not
used so they do not need to be saved/restored.

There may be a small overhead caused by replacing 'xchg REG, REG' with
the needed sequence 'mov MEM, REG; mov REG, MEM; mov REG, REG' once per
round.  But, counterintuitively, when I tested "ctr-twofish-3way" on a
Haswell processor, the new version was actually about 2% faster.
(Perhaps 'xchg' is not as well optimized as plain moves.)

Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

selinux: skip bounded transition processing if the policy isn't loaded

commit 4b14752ec4e0d87126e636384cf37c8dd9df157c upstream.

We can't do anything reasonable in security_bounded_transition() if we
don't have a policy loaded, and in fact we could run into problems
with some of the code inside expecting a policy.  Fix these problems
like we do many others in security/selinux/ss/services.c by checking
to see if the policy is loaded (ss_initialized) and returning quickly
if it isn't.

Reported-by: syzbot <syzkaller-bugs@googlegroups.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Acked-by: Stephen Smalley <sds@tycho.nsa.gov>
Reviewed-by: James Morris <james.l.morris@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xfrm: check id proto in validate_tmpl()

commit 6a53b7593233ab9e4f96873ebacc0f653a55c3e1 upstream.

syzbot reported a kernel warning in xfrm_state_fini(), which
indicates that we have entries left in the list
net->xfrm.state_all whose proto is zero. And
xfrm_id_proto_match() doesn't consider them as a match with
IPSEC_PROTO_ANY in this case.

Proto with value 0 is probably not a valid value, at least
verify_newsa_info() doesn't consider it valid either.

This patch fixes it by checking the proto value in
validate_tmpl() and rejecting invalid ones, like what iproute2
does in xfrm_xfrmproto_getbyname().

Reported-by: syzbot <syzkaller@googlegroups.com>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm,vmscan: Make unregister_shrinker() no-op if register_shrinker() failed.

commit bb422a738f6566f7439cd347d54e321e4fe92a9f upstream.

Syzbot caught an oops at unregister_shrinker() because combination of
commit 1d3d4437eae1bb29 ("vmscan: per-node deferred work") and fault
injection made register_shrinker() fail and the caller of
register_shrinker() did not check for failure.

----------
[  554.881422] FAULT_INJECTION: forcing a failure.
[  554.881422] name failslab, interval 1, probability 0, space 0, times 0
[  554.881438] CPU: 1 PID: 13231 Comm: syz-executor1 Not tainted 4.14.0-rc8+ #82
[  554.881443] Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
[  554.881445] Call Trace:
[  554.881459]  dump_stack+0x194/0x257
[  554.881474]  ? arch_local_irq_restore+0x53/0x53
[  554.881486]  ? find_held_lock+0x35/0x1d0
[  554.881507]  should_fail+0x8c0/0xa40
[  554.881522]  ? fault_create_debugfs_attr+0x1f0/0x1f0
[  554.881537]  ? check_noncircular+0x20/0x20
[  554.881546]  ? find_next_zero_bit+0x2c/0x40
[  554.881560]  ? ida_get_new_above+0x421/0x9d0
[  554.881577]  ? find_held_lock+0x35/0x1d0
[  554.881594]  ? __lock_is_held+0xb6/0x140
[  554.881628]  ? check_same_owner+0x320/0x320
[  554.881634]  ? lock_downgrade+0x990/0x990
[  554.881649]  ? find_held_lock+0x35/0x1d0
[  554.881672]  should_failslab+0xec/0x120
[  554.881684]  __kmalloc+0x63/0x760
[  554.881692]  ? lock_downgrade+0x990/0x990
[  554.881712]  ? register_shrinker+0x10e/0x2d0
[  554.881721]  ? trace_event_raw_event_module_request+0x320/0x320
[  554.881737]  register_shrinker+0x10e/0x2d0
[  554.881747]  ? prepare_kswapd_sleep+0x1f0/0x1f0
[  554.881755]  ? _down_write_nest_lock+0x120/0x120
[  554.881765]  ? memcpy+0x45/0x50
[  554.881785]  sget_userns+0xbcd/0xe20
(...snipped...)
[  554.898693] kasan: CONFIG_KASAN_INLINE enabled
[  554.898724] kasan: GPF could be caused by NULL-ptr deref or user memory access
[  554.898732] general protection fault: 0000 [#1] SMP KASAN
[  554.898737] Dumping ftrace buffer:
[  554.898741]    (ftrace buffer empty)
[  554.898743] Modules linked in:
[  554.898752] CPU: 1 PID: 13231 Comm: syz-executor1 Not tainted 4.14.0-rc8+ #82
[  554.898755] Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
[  554.898760] task: ffff8801d1dbe5c0 task.stack: ffff8801c9e38000
[  554.898772] RIP: 0010:__list_del_entry_valid+0x7e/0x150
[  554.898775] RSP: 0018:ffff8801c9e3f108 EFLAGS: 00010246
[  554.898780] RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000000000
[  554.898784] RDX: 0000000000000000 RSI: ffff8801c53c6f98 RDI: ffff8801c53c6fa0
[  554.898788] RBP: ffff8801c9e3f120 R08: 1ffff100393c7d55 R09: 0000000000000004
[  554.898791] R10: ffff8801c9e3ef70 R11: 0000000000000000 R12: 0000000000000000
[  554.898795] R13: dffffc0000000000 R14: 1ffff100393c7e45 R15: ffff8801c53c6f98
[  554.898800] FS:  0000000000000000(0000) GS:ffff8801db300000(0000) knlGS:0000000000000000
[  554.898804] CS:  0010 DS: 002b ES: 002b CR0: 0000000080050033
[  554.898807] CR2: 00000000dbc23000 CR3: 00000001c7269000 CR4: 00000000001406e0
[  554.898813] DR0: 0000000020000000 DR1: 0000000020000000 DR2: 0000000000000000
[  554.898816] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000600
[  554.898818] Call Trace:
[  554.898828]  unregister_shrinker+0x79/0x300
[  554.898837]  ? perf_trace_mm_vmscan_writepage+0x750/0x750
[  554.898844]  ? down_write+0x87/0x120
[  554.898851]  ? deactivate_super+0x139/0x1b0
[  554.898857]  ? down_read+0x150/0x150
[  554.898864]  ? check_same_owner+0x320/0x320
[  554.898875]  deactivate_locked_super+0x64/0xd0
[  554.898883]  deactivate_super+0x141/0x1b0
----------

Since allowing register_shrinker() callers to call unregister_shrinker()
when register_shrinker() failed can simplify error recovery path, this
patch makes unregister_shrinker() no-op when register_shrinker() failed.
Also, reset shrinker->nr_deferred in case unregister_shrinker() was
by error called twice.

Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Aliaksei Karaliou <akaraliou.dev@gmail.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Cc: Glauber Costa <glauber@scylladb.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: r820t: fix r820t_write_reg for KASAN

commit 16c3ada89cff9a8c2a0eea34ffa1aa20af3f6008 upstream.

With CONFIG_KASAN, we get an overly long stack frame due to inlining
the register access functions:

drivers/media/tuners/r820t.c: In function 'generic_set_freq.isra.7':
drivers/media/tuners/r820t.c:1334:1: error: the frame size of 2880 bytes is larger than 2048 bytes [-Werror=frame-larger-than=]

This is caused by a gcc bug that has now been fixed in gcc-8.
To work around the problem, we can pass the register data
through a local variable that older gcc versions can optimize
out as well.

Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=81715
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: dts: s5pv210: add interrupt-parent for ohci

commit 5c1037196b9ee75897c211972de370ed1336ec8f upstream.

The ohci-hcd node has an interrupt number but no interrupt-parent,
leading to a warning with current dtc versions:

arch/arm/boot/dts/s5pv210-aquila.dtb: Warning (interrupts_property): Missing interrupt-parent for /soc/ohci@ec300000
arch/arm/boot/dts/s5pv210-goni.dtb: Warning (interrupts_property): Missing interrupt-parent for /soc/ohci@ec300000
arch/arm/boot/dts/s5pv210-smdkc110.dtb: Warning (interrupts_property): Missing interrupt-parent for /soc/ohci@ec300000
arch/arm/boot/dts/s5pv210-smdkv210.dtb: Warning (interrupts_property): Missing interrupt-parent for /soc/ohci@ec300000
arch/arm/boot/dts/s5pv210-torbreck.dtb: Warning (interrupts_property): Missing interrupt-parent for /soc/ohci@ec300000

As seen from the related exynos dts files, the ohci and ehci controllers
always share one interrupt number, and the number is the same here as
well, so setting the same interrupt-parent is the reasonable solution
here.

Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: seq: Fix racy pool initializations

commit d15d662e89fc667b90cd294b0eb45694e33144da upstream.

ALSA sequencer core initializes the event pool on demand by invoking
snd_seq_pool_init() when the first write happens and the pool is
empty.  Meanwhile user can reset the pool size manually via ioctl
concurrently, and this may lead to UAF or out-of-bound accesses since
the function tries to vmalloc / vfree the buffer.

A simple fix is to just wrap the snd_seq_pool_init() call with the
recently introduced client->ioctl_mutex; as the calls for
snd_seq_pool_init() from other side are always protected with this
mutex, we can avoid the race.

Reported-by: 范龙飞 <long7573@126.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Btrfs: fix crash due to not cleaning up tree log block's dirty bits

commit 1846430c24d66e85cc58286b3319c82cd54debb2 upstream.

In cases that the whole fs flips into readonly status due to failures in
critical sections, then log tree's blocks are still dirty, and this leads
to a crash during umount time, the crash is about use-after-free,

umount
 -> close_ctree
    -> stop workers
    -> iput(btree_inode)
       -> iput_final
          -> write_inode_now
     -> ...
       -> queue job on stop'd workers

cc: <stable@vger.kernel.org> v3.12+
Fixes: 681ae50917df ("Btrfs: cleanup reserved space when freeing tree log on error")
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Btrfs: fix deadlock in run_delalloc_nocow

commit e89166990f11c3f21e1649d760dd35f9e410321c upstream.

@cur_offset is not set back to what it should be (@cow_start) if
btrfs_next_leaf() returns something wrong, and the range [cow_start,
cur_offset) remains locked forever.

cc: <stable@vger.kernel.org>
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

console/dummy: leave .con_font_get set to NULL

commit 724ba8b30b044aa0d94b1cd374fc15806cdd6f18 upstream.

When this method is set, the caller expects struct console_font fields
to be properly initialized when it returns. Leave it unset otherwise
nonsensical (leaked kernel stack) values are returned to user space.

Signed-off-by: Nicolas Pitre <nico@linaro.org>
Cc: stable@vger.kernel.org
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

video: fbdev: atmel_lcdfb: fix display-timings lookup

commit 9cb18db0701f6b74f0c45c23ad767b3ebebe37f6 upstream.

Fix child-node lookup during probe, which ended up searching the whole
device tree depth-first starting at the parent rather than just matching
on its children.

To make things worse, the parent display node was also prematurely
freed.

Note that the display and timings node references are never put after a
successful dt-initialisation so the nodes would leak on later probe
deferrals and on driver unbind.

Fixes: b985172b328a ("video: atmel_lcdfb: add device tree suport")
Cc: stable <stable@vger.kernel.org> # 3.13
Cc: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: correct documentation for grpid mount option

commit 9f0372488cc9243018a812e8cfbf27de650b187b upstream.

The grpid option is currently described as being the same as nogrpid.

Signed-off-by: Ernesto A. Fernández <ernesto.mnd.fernandez@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: save error to disk in __ext4_grp_locked_error()

commit 06f29cc81f0350261f59643a505010531130eea0 upstream.

In the function __ext4_grp_locked_error(), __save_error_info()
is called to save error info in super block block, but does not sync
that information to disk to info the subsequence fsck after reboot.

This patch writes the error information to disk.  After this patch,
I think there is no obvious EXT4 error handle branches which leads to
"Remounting filesystem read-only" will leave the disk partition miss
the subsequence fsck.

Signed-off-by: Zhouyi Zhou <zhouzhouyi@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/radeon: adjust tested variable

commit 3a61b527b4e1f285d21b6e9e623dc45cf8bb391f upstream.

Check the variable that was most recently initialized.

The semantic match that finds this problem is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@@
expression x, y, f, g, e, m;
statement S1,S2,S3,S4;
@@

x = f(...);
if (\(<+...x...+>\&e\)) S1 else S2
(
x = g(...);
|
m = g(...,&x,...);
|
y = g(...);
*if (e)
 S3 else S4
)
// </smpl>

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: seq: Fix regression by incorrect ioctl_mutex usages

This is the revised backport of the upstream commit
b3defb791b26ea0683a93a4f49c77ec45ec96f10

We had another backport (e.g. 623e5c8ae32b in 4.4.115), but it applies
the new mutex also to the code paths that are invoked via faked
kernel-to-kernel ioctls.  As reported recently, this leads to a
deadlock at suspend (or other scenarios triggering the kernel
sequencer client).

This patch addresses the issue by taking the mutex only in the code
paths invoked by user-space, just like the original fix patch does.

Reported-and-tested-by: Andres Bertens <abertensu@yahoo.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm: spear13xx: Fix spics gpio controller's warning

commit f8975cb1b8a36d0839b6365235778dd9df1d04ca upstream.

This fixes the following warning by also sending the flags argument for
gpio controllers:

Property 'cs-gpios', cell 6 is not a phandle reference in
/ahb/apb/spi@e0100000

Fixes: 8113ba917dfa ("ARM: SPEAr: DT: Update device nodes")
Cc: stable@vger.kernel.org # v3.8+
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm: spear13xx: Fix dmas cells

commit cdd10409914184c7eee5ae3e11beb890c9c16c61 upstream.

The "dmas" cells for the designware DMA controller need to have only 3
properties apart from the phandle: request line, src master and
destination master. But the commit 6e8887f60f60 updated it incorrectly
while moving from platform code to DT. Fix it.

Cc: stable@vger.kernel.org # v3.10+
Fixes: 6e8887f60f60 ("ARM: SPEAr13xx: Pass generic DW DMAC platform data from DT")
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm: spear600: Add missing interrupt-parent of rtc

commit 6ffb5b4f248fe53e0361b8cbc2a523b432566442 upstream.

The interrupt-parent of rtc was missing, add it.

Fixes: 8113ba917dfa ("ARM: SPEAr: DT: Update device nodes")
Cc: stable@vger.kernel.org # v3.8+
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390: fix handling of -1 in set{,fs}[gu]id16 syscalls

commit 6dd0d2d22aa363fec075cb2577ba273ac8462e94 upstream.

For some reason, the implementation of some 16-bit ID system calls
(namely, setuid16/setgid16 and setfsuid16/setfsgid16) used type cast
instead of low2highgid/low2highuid macros for converting [GU]IDs, which
led to incorrect handling of value of -1 (which ought to be considered
invalid).

Discovered by strace test suite.

Cc: stable@vger.kernel.org
Signed-off-by: Eugene Syromiatnikov <esyr@redhat.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PM / devfreq: Propagate error from devfreq_add_device()

commit d1bf2d30728f310f72296b54f0651ecdb09cbb12 upstream.

Propagate the error of devfreq_add_device() in devm_devfreq_add_device()
rather than statically returning ENOMEM. This makes it slightly faster
to pinpoint the cause of a returned error.

Fixes: 8cd84092d35e ("PM / devfreq: Add resource-managed function for devfreq device")
Cc: stable@vger.kernel.org
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

IB/mlx4: Fix incorrectly releasing steerable UD QPs when have only ETH ports

commit 852f6927594d0d3e8632c889b2ab38cbc46476ad upstream.

Allocating steerable UD QPs depends on having at least one IB port,
while releasing those QPs does not.

As a result, when there are only ETH ports, the IB (RoCE) driver
requests releasing a qp range whose base qp is zero, with
qp count zero.

When SR-IOV is enabled, and the VF driver is running on a VM over
a hypervisor which treats such qp release calls as errors
(rather than NOPs), we see lines in the VM message log like:

 mlx4_core 0002:00:02.0: Failed to release qp range base:0 cnt:0

Fix this by adding a check for a zero count in mlx4_release_qp_range()
(which thus treats releasing 0 qps as a nop), and eliminating the
check for device managed flow steering when releasing steerable UD QPs.
(Freeing ib_uc_qpns_bitmap unconditionally is also OK, since it
remains NULL when steerable UD QPs are not allocated).

Fixes: 4196670be786 ("IB/mlx4: Don't allocate range of steerable UD QPs for Ethernet-only device")
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 3.18.95

mn10300/misalignment: Use SIGSEGV SEGV_MAPERR to report a failed user copy

commit 6ac1dc736b323011a55ecd1fc5897c24c4f77cbd upstream.

Setting si_code to 0 is the same a setting si_code to SI_USER which is definitely
not correct.  With si_code set to SI_USER si_pid and si_uid will be copied to
userspace instead of si_addr.  Which is very wrong.

So fix this by using a sensible si_code (SEGV_MAPERR) for this failure.

Fixes: b920de1b77b7 ("mn10300: add the MN10300/AM33 architecture to the kernel")
Cc: David Howells <dhowells@redhat.com>
Cc: Masakazu Urade <urade.masakazu@jp.panasonic.com>
Cc: Koichi Yasutake <yasutake.koichi@jp.panasonic.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ACPI: sbshc: remove raw pointer from printk() message

commit 43cdd1b716b26f6af16da4e145b6578f98798bf6 upstream.

There's no need to be printing a raw kernel pointer to the kernel log at
every boot.  So just remove it, and change the whole message to use the
correct dev_info() call at the same time.

Reported-by: Wang Qize <wang_qize@venustech.com.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

pktcdvd: Fix pkt_setup_dev() error path

commit 5a0ec388ef0f6e33841aeb810d7fa23f049ec4cd upstream.

Commit 523e1d399ce0 ("block: make gendisk hold a reference to its queue")
modified add_disk() and disk_release() but did not update any of the
error paths that trigger a put_disk() call after disk->queue has been
assigned. That introduced the following behavior in the pktcdvd driver
if pkt_new_dev() fails:

Kernel BUG at 00000000e98fd882 [verbose debug info unavailable]

Since disk_release() calls blk_put_queue() anyway if disk->queue != NULL,
fix this by removing the blk_cleanup_queue() call from the pkt_setup_dev()
error path.

Fixes: commit 523e1d399ce0 ("block: make gendisk hold a reference to its queue")
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Maciej S. Szmigiero <mail@maciej.szmigiero.name>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

EDAC, octeon: Fix an uninitialized variable warning

commit 544e92581a2ac44607d7cc602c6b54d18656f56d upstream.

Fix an uninitialized variable warning in the Octeon EDAC driver, as seen
in MIPS cavium_octeon_defconfig builds since v4.14 with Codescape GNU
Tools 2016.05-03:

  drivers/edac/octeon_edac-lmc.c In function ‘octeon_lmc_edac_poll_o2’:
  drivers/edac/octeon_edac-lmc.c:87:24: warning: ‘((long unsigned int*)&int_reg)[1]’ may \
    be used uninitialized in this function [-Wmaybe-uninitialized]
    if (int_reg.s.sec_err || int_reg.s.ded_err) {
                        ^
Iinitialise the whole int_reg variable to zero before the conditional
assignments in the error injection case.

Signed-off-by: James Hogan <jhogan@kernel.org>
Acked-by: David Daney <david.daney@cavium.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: linux-mips@linux-mips.org
Fixes: 1bc021e81565 ("EDAC: Octeon: Add error injection support")
Link: http://lkml.kernel.org/r/20171113161206.20990-1-james.hogan@mips.com
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xtensa: fix futex_atomic_cmpxchg_inatomic

commit ca47480921587ae30417dd234a9f79af188e3666 upstream.

Return 0 if the operation was successful, not the userspace memory
value. Check that userspace value equals passed oldval, not itself.
Don't update *uval if the value wasn't read from userspace memory.

This fixes process hang due to infinite loop in futex_lock_pi.
It also fixes a bunch of glibc tests nptl/tst-mutexpi*.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

alpha: fix reboot on Avanti platform

commit 55fc633c41a08ce9244ff5f528f420b16b1e04d6 upstream.

We need to define NEED_SRM_SAVE_RESTORE on the Avanti, otherwise we get
machine check exception when attempting to reboot the machine.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

alpha: fix crash if pthread_create races with signal delivery

commit 21ffceda1c8b3807615c40d440d7815e0c85d366 upstream.

On alpha, a process will crash if it attempts to start a thread and a
signal is delivered at the same time. The crash can be reproduced with
this program: https://cygwin.com/ml/cygwin/2014-11/msg00473.html

The reason for the crash is this:
* we call the clone syscall
* we go to the function copy_process
* copy process calls copy_thread_tls, it is a wrapper around copy_thread
* copy_thread sets the tls pointer: childti->pcb.unique = regs->r20
* copy_thread sets regs->r20 to zero
* we go back to copy_process
* copy process checks "if (signal_pending(current))" and returns
  -ERESTARTNOINTR
* the clone syscall is restarted, but this time, regs->r20 is zero, so
  the new thread is created with zero tls pointer
* the new thread crashes in start_thread when attempting to access tls

The comment in the code says that setting the register r20 is some
compatibility with OSF/1. But OSF/1 doesn't use the CLONE_SETTLS flag, so
we don't have to zero r20 if CLONE_SETTLS is set. This patch fixes the bug
by zeroing regs->r20 only if CLONE_SETTLS is not set.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

signal/sh: Ensure si_signo is initialized in do_divide_error

commit 0e88bb002a9b2ee8cc3cc9478ce2dc126f849696 upstream.

Set si_signo.

Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Rich Felker <dalias@libc.org>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: linux-sh@vger.kernel.org
Fixes: 0983b31849bb ("sh: Wire up division and address error exceptions on SH-2A.")
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>