git.fsl.cs.sunysb.edu Git - wrapfs-5.10.y.git/log

powerpc/watchdog: Use hrtimers for per-CPU heartbeat

[ Upstream commit 7ae3f6e130e8dc6188b59e3b4ebc2f16e9c8d053 ]

Using a jiffies timer creates a dependency on the tick_do_timer_cpu
incrementing jiffies. If that CPU has locked up and jiffies is not
incrementing, the watchdog heartbeat timer for all CPUs stops and
creates false positives and confusing warnings on local CPUs, and
also causes the SMP detector to stop, so the root cause is never
detected.

Fix this by using hrtimer based timers for the watchdog heartbeat,
like the generic kernel hardlockup detector.

Cc: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Reported-by: Ravikumar Bangoria <ravi.bangoria@in.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Tested-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Reported-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Reviewed-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

x86/ftrace: Set trampoline pages as executable

[ Upstream commit 3c0dab44e22782359a0a706cbce72de99a22aa75 ]

Since alloc_module() will not set the pages as executable soon, set
ftrace trampoline pages as executable after they are allocated.

For the time being, do not change ftrace to use the text_poke()
interface. As a result, ftrace still breaks W^X.

Signed-off-by: Nadav Amit <namit@vmware.com>
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: <akpm@linux-foundation.org>
Cc: <ard.biesheuvel@linaro.org>
Cc: <deneen.t.dock@intel.com>
Cc: <kernel-hardening@lists.openwall.com>
Cc: <kristen@linux.intel.com>
Cc: <linux_dti@icloud.com>
Cc: <will.deacon@arm.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20190426001143.4983-10-namit@vmware.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mt76: remove mt76_queue dependency from tx_queue_skb function pointer

[ Upstream commit 89a37842b0c13c9e568bf12f4fcbe6507147e41d ]

Remove mt76_queue dependency from tx_queue_skb function pointer and
rely on mt76_tx_qid instead. This is a preliminary patch to introduce
mt76_sw_queue support

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: Fix compiler warning from pte_unmap() with -Wunused-but-set-variable

[ Upstream commit 74dd022f9e6260c3b5b8d15901d27ebcc5f21eda ]

When building with -Wunused-but-set-variable, the compiler shouts about
a number of pte_unmap() users, since this expands to an empty macro on
arm64:

  | mm/gup.c: In function 'gup_pte_range':
  | mm/gup.c:1727:16: warning: variable 'ptem' set but not used
  | [-Wunused-but-set-variable]
  | mm/gup.c: At top level:
  | mm/memory.c: In function 'copy_pte_range':
  | mm/memory.c:821:24: warning: variable 'orig_dst_pte' set but not used
  | [-Wunused-but-set-variable]
  | mm/memory.c:821:9: warning: variable 'orig_src_pte' set but not used
  | [-Wunused-but-set-variable]
  | mm/swap_state.c: In function 'swap_ra_info':
  | mm/swap_state.c:641:15: warning: variable 'orig_pte' set but not used
  | [-Wunused-but-set-variable]
  | mm/madvise.c: In function 'madvise_free_pte_range':
  | mm/madvise.c:318:9: warning: variable 'orig_pte' set but not used
  | [-Wunused-but-set-variable]

Rewrite pte_unmap() as a static inline function, which silences the
warnings.

Signed-off-by: Qian Cai <cai@lca.pw>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: vdso: Remove dependency with the arch_timer driver internals

[ Upstream commit 1f5b62f09f6b314c8d70b9de5182dae4de1f94da ]

The VDSO code uses the kernel helper that was originally designed
to abstract the access between 32 and 64bit systems. It worked so
far because this function is declared as 'inline'.

As we're about to revamp that part of the code, the VDSO would
break. Let's fix it by doing what should have been done from
the start, a proper system register access.

Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: stm32-dcmi: return appropriate error codes during probe

[ Upstream commit b5b5a27bee5884860798ffd0f08e611a3942064b ]

During probe, return the provided errors value instead of -ENODEV.
This allows the driver to be deferred probed if needed.

Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com>
Acked-by: Hugues Fruchet <hugues.fruchet@st.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/nouveau/bar/nv50: ensure BAR is mapped

[ Upstream commit f10b83de1fd49216a4c657816f48001437e4bdd5 ]

If the BAR is zero size, it indicates it was never successfully mapped.
Ensure that the BAR is valid during initialization before attempting to
use it.

Signed-off-by: Jon Derrick <jonathan.derrick@intel.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ACPI / property: fix handling of data_nodes in acpi_get_next_subnode()

[ Upstream commit 23583f7795025e3c783b680d906509366b0906ad ]

When the DSDT tables expose devices with subdevices and a set of
hierarchical _DSD properties, the data returned by
acpi_get_next_subnode() is incorrect, with the results suggesting a bad
pointer assignment. The parser works fine with device_nodes or
data_nodes, but not with a combination of the two.

The problem is traced to an invalid pointer used when jumping from
handling device_nodes to data nodes. The existing code looks for data
nodes below the last subdevice found instead of the common root. Fix
by forcing the acpi_device pointer to be derived from the same fwnode
for the two types of subnodes.

This same problem of handling device and data nodes was already fixed
in a similar way by 'commit bf4703fdd166 ("ACPI / property: fix data
node parsing in acpi_get_next_subnode()")' but broken later by 'commit
34055190b19 ("ACPI / property: Add fwnode_get_next_child_node()")', so
this should probably go to linux-stable all the way to 4.12

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

brcm80211: potential NULL dereference in brcmf_cfg80211_vndr_cmds_dcmd_handler()

[ Upstream commit e025da3d7aa4770bb1d1b3b0aa7cc4da1744852d ]

If "ret_len" is negative then it could lead to a NULL dereference.

The "ret_len" value comes from nl80211_vendor_cmd(), if it's negative
then we don't allocate the "dcmd_buf" buffer.  Then we pass "ret_len" to
brcmf_fil_cmd_data_set() where it is cast to a very high u32 value.
Most of the functions in that call tree check whether the buffer we pass
is NULL but there are at least a couple places which don't such as
brcmf_dbg_hex_dump() and brcmf_msgbuf_query_dcmd().  We memcpy() to and
from the buffer so it would result in a NULL dereference.

The fix is to change the types so that "ret_len" can't be negative.  (If
we memcpy() zero bytes to NULL, that's a no-op and doesn't cause an
issue).

Fixes: 1bacb0487d0e ("brcmfmac: replace cfg80211 testmode with vendor command")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx5: E-Switch, Use atomic rep state to serialize state change

[ Upstream commit 6f4e02193c9a9ea54dd3151cf97489fa787cd0e6 ]

When the state of rep was introduced, it was also designed to prevent
duplicate unloading of the same rep. Considering the following two
flows when an eswitch manager is at switchdev mode with n VF reps loaded.

+--------------------------------------+--------------------------------+
| cpu-0                                | cpu-1                          |
| --------                             | --------                       |
| mlx5_ib_remove                       | mlx5_eswitch_disable_sriov     |
|  mlx5_ib_unregister_vport_reps       |  esw_offloads_cleanup          |
|   mlx5_eswitch_unregister_vport_reps |   esw_offloads_unload_all_reps |
|    __unload_reps_all_vport           |    __unload_reps_all_vport     |
+--------------------------------------+--------------------------------+

These two flows will try to unload the same rep. Per original design,
once one flow unloads the rep, the state moves to REGISTERED. The 2nd
flow will no longer needs to do the unload and bails out. However, as
read and write of the state is not atomic, when 1st flow is doing the
unload, the state is still LOADED, 2nd flow is able to do the same
unload action. Kernel crash will happen.

To solve this, driver should do atomic test-and-set for the state. So
that only one flow can change the rep state from LOADED to REGISTERED,
and proceed to do the actual unloading.

Since the state is changing to atomic type, all other read/write should
be atomic action as well.

Fixes: f121e0ea9586 (net/mlx5: E-Switch, Add state to eswitch vport representors)
Signed-off-by: Bodong Wang <bodong@mellanox.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Vu Pham <vuhuong@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

spi: pxa2xx: fix SCR (divisor) calculation

[ Upstream commit 29f2133717c527f492933b0622a4aafe0b3cbe9e ]

Calculate the divisor for the SCR (Serial Clock Rate), avoiding
that the SSP transmission rate can be greater than the device rate.

When the division between the SSP clock and the device rate generates
a reminder, we have to increment by one the divisor.
In this way the resulting SSP clock will never be greater than the
device SPI max frequency.

For example, with:

- ssp_clk = 50 MHz
- dev freq = 15 MHz

without this patch the SSP clock will be greater than 15 MHz:

- 25 MHz for PXA25x_SSP and CE4100_SSP
- 16,56 MHz for the others

Instead, with this patch, we have in both case an SSP clock of 12.5MHz,
so the max rate of the SPI device clock is respected.

Signed-off-by: Flavio Suligoi <f.suligoi@asem.it>
Reviewed-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Reviewed-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: imx: fix fiq dependencies

[ Upstream commit ea751227c813ab833609afecfeedaf0aa26f327e ]

During randconfig builds, I occasionally run into an invalid configuration
of the freescale FIQ sound support:

WARNING: unmet direct dependencies detected for SND_SOC_IMX_PCM_FIQ
  Depends on [m]: SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && SND_IMX_SOC [=m]
  Selected by [y]:
  - SND_SOC_FSL_SPDIF [=y] && SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && SND_IMX_SOC [=m]!=n && (MXC_TZIC [=n] || MXC_AVIC [=y])

sound/soc/fsl/imx-ssi.o: In function `imx_ssi_remove':
imx-ssi.c:(.text+0x28): undefined reference to `imx_pcm_fiq_exit'
sound/soc/fsl/imx-ssi.o: In function `imx_ssi_probe':
imx-ssi.c:(.text+0xa64): undefined reference to `imx_pcm_fiq_init'

The Kconfig warning is a result of the symbol being defined inside of
the "if SND_IMX_SOC" block, and is otherwise harmless. The link error
is more tricky and happens with SND_SOC_IMX_SSI=y, which may or may not
imply FIQ support. However, if SND_SOC_FSL_SSI is set to =m at the same
time, that selects SND_SOC_IMX_PCM_FIQ as a loadable module dependency,
which then causes a link failure from imx-ssi.

The solution here is to make SND_SOC_IMX_PCM_FIQ built-in whenever
one of its potential users is built-in.

Fixes: ff40260f79dc ("ASoC: fsl: refine DMA/FIQ dependencies")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

spi: atmel-quadspi: fix crash while suspending

[ Upstream commit e5c27498a0403b270620b1a8a0a66e3efc222fb6 ]

atmel_qspi objects are kept in spi_controller objects, so, first get
pointer to spi_controller object and then get atmel_qspi object from
spi_controller object.

Fixes: 2d30ac5ed633 ("mtd: spi-nor: atmel-quadspi: Use spi-mem interface for atmel-quadspi driver")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/perf: Fix loop exit condition in nest_imc_event_init

[ Upstream commit 860b7d2286236170a36f94946d03ca9888d32571 ]

The data structure (i.e struct imc_mem_info) to hold the memory address
information for nest imc units is allocated based on the number of nodes
in the system.

nest_imc_event_init() traverse this struct array to calculate the memory
base address for the event-cpu. If we fail to find a match for the event
cpu's chip-id in imc_mem_info struct array, then the do-while loop will
iterate until we crash.

Fix this by changing the loop exit condition based on the number of
non zero vbase elements in the array, since the allocation is done for
nr_chips + 1.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: 885dcd709ba91 ("powerpc/perf: Add nest IMC PMU support")
Signed-off-by: Anju T Sudhakar <anju@linux.vnet.ibm.com>
Reviewed-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/boot: Fix missing check of lseek() return value

[ Upstream commit 5d085ec04a000fefb5182d3b03ee46ca96d8389b ]

This is detected by Coverity scan: CID: 1440481

Signed-off-by: Bo YU <tsu.yubo@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/perf: Return accordingly on invalid chip-id in

[ Upstream commit a913e5e8b43be1d3897a141ce61c1ec071cad89c ]

Nest hardware counter memory resides in a per-chip reserve-memory.
During nest_imc_event_init(), chip-id of the event-cpu is considered to
calculate the base memory addresss for that cpu. Return, proper error
condition if the chip_id calculated is invalid.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: 885dcd709ba91 ("powerpc/perf: Add nest IMC PMU support")
Reviewed-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Signed-off-by: Anju T Sudhakar <anju@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: hdmi-codec: unlock the device on startup errors

[ Upstream commit 30180e8436046344b12813dc954b2e01dfdcd22d ]

If the hdmi codec startup fails, it should clear the current_substream
pointer to free the device. This is properly done for the audio_startup()
callback but for snd_pcm_hw_constraint_eld().

Make sure the pointer cleared if an error is reported.

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: gadget: f_fs: don't free buffer prematurely

[ Upstream commit 73103c7f958b99561555c3bd1bc1a0809e0b7d61 ]

The following kernel panic happens due to the io_data buffer gets deallocated
before the async io is completed. Add a check for the case where io_data buffer
should be deallocated by ffs_user_copy_worker.

[   41.663334] BUG: unable to handle kernel NULL pointer dereference at 0000000000000048
[   41.672099] #PF error: [normal kernel read fault]
[   41.677356] PGD 20c974067 P4D 20c974067 PUD 20c973067 PMD 0
[   41.683687] Oops: 0000 [#1] PREEMPT SMP
[   41.687976] CPU: 1 PID: 7 Comm: kworker/u8:0 Tainted: G     U            5.0.0-quilt-2e5dc0ac-00790-gd8c79f2-dirty #2
[   41.705309] Workqueue: adb ffs_user_copy_worker
[   41.705316] RIP: 0010:__vunmap+0x2a/0xc0
[   41.705318] Code: 0f 1f 44 00 00 48 85 ff 0f 84 87 00 00 00 55 f7 c7 ff 0f 00 00 48 89 e5 41 55 41 89 f5 41 54 53 48 89 fb 75 71 e8 56 d7 ff ff <4c> 8b 60 48 4d 85 e4 74 76 48 89 df e8 25 ff ff ff 45 85 ed 74 46
[   41.705320] RSP: 0018:ffffbc3a40053df0 EFLAGS: 00010286
[   41.705322] RAX: 0000000000000000 RBX: ffffbc3a406f1000 RCX: 0000000000000000
[   41.705323] RDX: 0000000000000001 RSI: 0000000000000001 RDI: 00000000ffffffff
[   41.705324] RBP: ffffbc3a40053e08 R08: 000000000001fb79 R09: 0000000000000037
[   41.705325] R10: ffffbc3a40053b68 R11: ffffbc3a40053cad R12: fffffffffffffff2
[   41.705326] R13: 0000000000000001 R14: 0000000000000000 R15: ffffffffffffffff
[   41.705328] FS:  0000000000000000(0000) GS:ffff9e2977a80000(0000) knlGS:0000000000000000
[   41.705329] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   41.705330] CR2: 0000000000000048 CR3: 000000020c994000 CR4: 00000000003406e0
[   41.705331] Call Trace:
[   41.705338]  vfree+0x50/0xb0
[   41.705341]  ffs_user_copy_worker+0xe9/0x1c0
[   41.705344]  process_one_work+0x19f/0x3e0
[   41.705348]  worker_thread+0x3f/0x3b0
[   41.829766]  kthread+0x12b/0x150
[   41.833371]  ? process_one_work+0x3e0/0x3e0
[   41.838045]  ? kthread_create_worker_on_cpu+0x70/0x70
[   41.843695]  ret_from_fork+0x3a/0x50
[   41.847689] Modules linked in: hci_uart bluetooth ecdh_generic rfkill_gpio dwc3_pci dwc3 snd_usb_audio mei_me tpm_crb snd_usbmidi_lib xhci_pci xhci_hcd mei tpm snd_hwdep cfg80211 snd_soc_skl snd_soc_skl_ipc snd_soc_sst_ipc snd_soc_sst_dsp snd_hda_ext_core snd_hda_core videobuf2_dma_sg crlmodule
[   41.876880] CR2: 0000000000000048
[   41.880584] ---[ end trace 2bc4addff0f2e673 ]---
[   41.891346] RIP: 0010:__vunmap+0x2a/0xc0
[   41.895734] Code: 0f 1f 44 00 00 48 85 ff 0f 84 87 00 00 00 55 f7 c7 ff 0f 00 00 48 89 e5 41 55 41 89 f5 41 54 53 48 89 fb 75 71 e8 56 d7 ff ff <4c> 8b 60 48 4d 85 e4 74 76 48 89 df e8 25 ff ff ff 45 85 ed 74 46
[   41.916740] RSP: 0018:ffffbc3a40053df0 EFLAGS: 00010286
[   41.922583] RAX: 0000000000000000 RBX: ffffbc3a406f1000 RCX: 0000000000000000
[   41.930563] RDX: 0000000000000001 RSI: 0000000000000001 RDI: 00000000ffffffff
[   41.938540] RBP: ffffbc3a40053e08 R08: 000000000001fb79 R09: 0000000000000037
[   41.946520] R10: ffffbc3a40053b68 R11: ffffbc3a40053cad R12: fffffffffffffff2
[   41.954502] R13: 0000000000000001 R14: 0000000000000000 R15: ffffffffffffffff
[   41.962482] FS:  0000000000000000(0000) GS:ffff9e2977a80000(0000) knlGS:0000000000000000
[   41.971536] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   41.977960] CR2: 0000000000000048 CR3: 000000020c994000 CR4: 00000000003406e0
[   41.985930] Kernel panic - not syncing: Fatal exception
[   41.991817] Kernel Offset: 0x16000000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff)
[   42.009525] Rebooting in 10 seconds..
[   52.014376] ACPI MEMORY or I/O RESET_REG.

Fixes: 772a7a724f69 ("usb: gadget: f_fs: Allow scatter-gather buffers")
Signed-off-by: Fei Yang <fei.yang@intel.com>
Reviewed-by: Manu Gautam <mgautam@codeaurora.org>
Tested-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: dwc3: move synchronize_irq() out of the spinlock protected block

[ Upstream commit 41a91c606e7d2b74358a944525267cc451c271e8 ]

dwc3_gadget_suspend() is called under dwc->lock spinlock. In such context
calling synchronize_irq() is not allowed. Move the problematic call out
of the protected block to fix the following kernel BUG during system
suspend:

BUG: sleeping function called from invalid context at kernel/irq/manage.c:112
in_atomic(): 1, irqs_disabled(): 128, pid: 1601, name: rtcwake
6 locks held by rtcwake/1601:
#0: f70ac2a2 (sb_writers#7){.+.+}, at: vfs_write+0x130/0x16c
#1: b5fe1270 (&of->mutex){+.+.}, at: kernfs_fop_write+0xc0/0x1e4
#2: 7e597705 (kn->count#60){.+.+}, at: kernfs_fop_write+0xc8/0x1e4
#3: 8b3527d0 (system_transition_mutex){+.+.}, at: pm_suspend+0xc4/0xc04
#4: fc7f1c42 (&dev->mutex){....}, at: __device_suspend+0xd8/0x74c
#5: 4b36507e (&(&dwc->lock)->rlock){....}, at: dwc3_gadget_suspend+0x24/0x3c
irq event stamp: 11252
hardirqs last  enabled at (11251): [<c09c54a4>] _raw_spin_unlock_irqrestore+0x6c/0x74
hardirqs last disabled at (11252): [<c09c4d44>] _raw_spin_lock_irqsave+0x1c/0x5c
softirqs last  enabled at (9744): [<c0102564>] __do_softirq+0x3a4/0x66c
softirqs last disabled at (9737): [<c0128528>] irq_exit+0x140/0x168
Preemption disabled at:
[<00000000>]   (null)
CPU: 7 PID: 1601 Comm: rtcwake Not tainted
5.0.0-rc3-next-20190122-00039-ga3f4ee4f8a52 #5252
Hardware name: SAMSUNG EXYNOS (Flattened Device Tree)
[<c01110f0>] (unwind_backtrace) from [<c010d120>] (show_stack+0x10/0x14)
[<c010d120>] (show_stack) from [<c09a4d04>] (dump_stack+0x90/0xc8)
[<c09a4d04>] (dump_stack) from [<c014c700>] (___might_sleep+0x22c/0x2c8)
[<c014c700>] (___might_sleep) from [<c0189d68>] (synchronize_irq+0x28/0x84)
[<c0189d68>] (synchronize_irq) from [<c05cbbf8>] (dwc3_gadget_suspend+0x34/0x3c)
[<c05cbbf8>] (dwc3_gadget_suspend) from [<c05bd020>] (dwc3_suspend_common+0x154/0x410)
[<c05bd020>] (dwc3_suspend_common) from [<c05bd34c>] (dwc3_suspend+0x14/0x2c)
[<c05bd34c>] (dwc3_suspend) from [<c051c730>] (platform_pm_suspend+0x2c/0x54)
[<c051c730>] (platform_pm_suspend) from [<c05285d4>] (dpm_run_callback+0xa4/0x3dc)
[<c05285d4>] (dpm_run_callback) from [<c0528a40>] (__device_suspend+0x134/0x74c)
[<c0528a40>] (__device_suspend) from [<c052c508>] (dpm_suspend+0x174/0x588)
[<c052c508>] (dpm_suspend) from [<c0182134>] (suspend_devices_and_enter+0xc0/0xe74)
[<c0182134>] (suspend_devices_and_enter) from [<c0183658>] (pm_suspend+0x770/0xc04)
[<c0183658>] (pm_suspend) from [<c0180ddc>] (state_store+0x6c/0xcc)
[<c0180ddc>] (state_store) from [<c09a9a70>] (kobj_attr_store+0x14/0x20)
[<c09a9a70>] (kobj_attr_store) from [<c02d6800>] (sysfs_kf_write+0x4c/0x50)
[<c02d6800>] (sysfs_kf_write) from [<c02d594c>] (kernfs_fop_write+0xfc/0x1e4)
[<c02d594c>] (kernfs_fop_write) from [<c02593d8>] (__vfs_write+0x2c/0x160)
[<c02593d8>] (__vfs_write) from [<c0259694>] (vfs_write+0xa4/0x16c)
[<c0259694>] (vfs_write) from [<c0259870>] (ksys_write+0x40/0x8c)
[<c0259870>] (ksys_write) from [<c0101000>] (ret_fast_syscall+0x0/0x28)
Exception stack(0xed55ffa8 to 0xed55fff0)
...

Fixes: 01c10880d242 ("usb: dwc3: gadget: synchronize_irq dwc irq in suspend")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: dwc2: gadget: Increase descriptors count for ISOC's

[ Upstream commit 54f37f56631747075f1f9a2f0edf6ba405e3e66c ]

Some function drivers queueing more than 128 ISOC requests at a time.
To avoid "descriptor chain full" cases, increasing descriptors count
from MAX_DMA_DESC_NUM_GENERIC to MAX_DMA_DESC_NUM_HS_ISOC for ISOC's
only.

Signed-off-by: Minas Harutyunyan <hminas@synopsys.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: Intel: kbl_da7219_max98357a: Map BTN_0 to KEY_PLAYPAUSE

[ Upstream commit 16ec5dfe0327ddcf279957bffe4c8fe527088c63 ]

On kbl_rt5663_max98927, commit 38a5882e4292
("ASoC: Intel: kbl_rt5663_max98927: Map BTN_0 to KEY_PLAYPAUSE")
This key pair mapping to play/pause when playing Youtube

The Android 3.5mm Headset jack specification mentions that BTN_0 should
be mapped to KEY_MEDIA, but this is less logical than KEY_PLAYPAUSE,
which has much broader userspace support.

For example, the Chrome OS userspace now supports KEY_PLAYPAUSE to toggle
play/pause of videos and audio, but does not handle KEY_MEDIA.

Furthermore, Android itself now supports KEY_PLAYPAUSE equivalently, as the
new USB headset spec requires KEY_PLAYPAUSE for BTN_0.
https://source.android.com/devices/accessories/headset/usb-headset-spec

The same fix is required on Chrome kbl_da7219_max98357a.

Signed-off-by: Mac Chiang <mac.chiang@intel.com>
Reviewed-by: Benson Leung <bleung@chromium.org>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pinctrl: zte: fix leaked of_node references

[ Upstream commit 02d15f0d80720545f1f4922a1550ea4aaad4e152 ]

The call to of_parse_phandle returns a node pointer with refcount
incremented thus it must be explicitly decremented after the last
usage.

Detected by coccinelle with the following warnings:
./drivers/pinctrl/zte/pinctrl-zx.c:415:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 407, but without a corresponding object release within this function.
./drivers/pinctrl/zte/pinctrl-zx.c:422:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 407, but without a corresponding object release within this function.
./drivers/pinctrl/zte/pinctrl-zx.c:436:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 407, but without a corresponding object release within this function.
./drivers/pinctrl/zte/pinctrl-zx.c:444:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 407, but without a corresponding object release within this function.
./drivers/pinctrl/zte/pinctrl-zx.c:448:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 407, but without a corresponding object release within this function.

Signed-off-by: Wen Yang <wen.yang99@zte.com.cn>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Jun Nie <jun.nie@linaro.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: linux-gpio@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Acked-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Bluetooth: Ignore CC events not matching the last HCI command

[ Upstream commit f80c5dad7b6467b884c445ffea45985793b4b2d0 ]

This commit makes the kernel not send the next queued HCI command until
a command complete arrives for the last HCI command sent to the
controller. This change avoids a problem with some buggy controllers
(seen on two SKUs of QCA9377) that send an extra command complete event
for the previous command after the kernel had already sent a new HCI
command to the controller.

The problem was reproduced when starting an active scanning procedure,
where an extra command complete event arrives for the LE_SET_RANDOM_ADDR
command. When this happends the kernel ends up not processing the
command complete for the following commmand, LE_SET_SCAN_PARAM, and
ultimately behaving as if a passive scanning procedure was being
performed, when in fact controller is performing an active scanning
procedure. This makes it impossible to discover BLE devices as no device
found events are sent to userspace.

This problem is reproducible on 100% of the attempts on the affected
controllers. The extra command complete event can be seen at timestamp
27.420131 on the btmon logs bellow.

Bluetooth monitor ver 5.50
= Note: Linux version 5.0.0+ (x86_64)                                  0.352340
= Note: Bluetooth subsystem version 2.22                               0.352343
= New Index: 80:C5:F2:8F:87:84 (Primary,USB,hci0)               [hci0] 0.352344
= Open Index: 80:C5:F2:8F:87:84                                 [hci0] 0.352345
= Index Info: 80:C5:F2:8F:87:84 (Qualcomm)                      [hci0] 0.352346
@ MGMT Open: bluetoothd (privileged) version 1.14             {0x0001} 0.352347
@ MGMT Open: btmon (privileged) version 1.14                  {0x0002} 0.352366
@ MGMT Open: btmgmt (privileged) version 1.14                {0x0003} 27.302164
@ MGMT Command: Start Discovery (0x0023) plen 1       {0x0003} [hci0] 27.302310
        Address type: 0x06
          LE Public
          LE Random
< HCI Command: LE Set Random Address (0x08|0x0005) plen 6   #1 [hci0] 27.302496
        Address: 15:60:F2:91:B2:24 (Non-Resolvable)
> HCI Event: Command Complete (0x0e) plen 4                 #2 [hci0] 27.419117
      LE Set Random Address (0x08|0x0005) ncmd 1
        Status: Success (0x00)
< HCI Command: LE Set Scan Parameters (0x08|0x000b) plen 7  #3 [hci0] 27.419244
        Type: Active (0x01)
        Interval: 11.250 msec (0x0012)
        Window: 11.250 msec (0x0012)
        Own address type: Random (0x01)
        Filter policy: Accept all advertisement (0x00)
> HCI Event: Command Complete (0x0e) plen 4                 #4 [hci0] 27.420131
      LE Set Random Address (0x08|0x0005) ncmd 1
        Status: Success (0x00)
< HCI Command: LE Set Scan Enable (0x08|0x000c) plen 2      #5 [hci0] 27.420259
        Scanning: Enabled (0x01)
        Filter duplicates: Enabled (0x01)
> HCI Event: Command Complete (0x0e) plen 4                 #6 [hci0] 27.420969
      LE Set Scan Parameters (0x08|0x000b) ncmd 1
        Status: Success (0x00)
> HCI Event: Command Complete (0x0e) plen 4                 #7 [hci0] 27.421983
      LE Set Scan Enable (0x08|0x000c) ncmd 1
        Status: Success (0x00)
@ MGMT Event: Command Complete (0x0001) plen 4        {0x0003} [hci0] 27.422059
      Start Discovery (0x0023) plen 1
        Status: Success (0x00)
        Address type: 0x06
          LE Public
          LE Random
@ MGMT Event: Discovering (0x0013) plen 2             {0x0003} [hci0] 27.422067
        Address type: 0x06
          LE Public
          LE Random
        Discovery: Enabled (0x01)
@ MGMT Event: Discovering (0x0013) plen 2             {0x0002} [hci0] 27.422067
        Address type: 0x06
          LE Public
          LE Random
        Discovery: Enabled (0x01)
@ MGMT Event: Discovering (0x0013) plen 2             {0x0001} [hci0] 27.422067
        Address type: 0x06
          LE Public
          LE Random
        Discovery: Enabled (0x01)

Signed-off-by: João Paulo Rechi Vita <jprvita@endlessm.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

hv_netvsc: fix race that may miss tx queue wakeup

[ Upstream commit 93aa4792c3908eac87ddd368ee0fe0564148232b ]

When the ring buffer is almost full due to RX completion messages, a
TX packet may reach the "low watermark" and cause the queue stopped.
If the TX completion arrives earlier than queue stopping, the wakeup
may be missed.

This patch moves the check for the last pending packet to cover both
EAGAIN and success cases, so the queue will be reliably waked up when
necessary.

Reported-and-tested-by: Stephan Klein <stephan.klein@wegfinder.at>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: ena: fix: set freed objects to NULL to avoid failing future allocations

[ Upstream commit 8ee8ee7fe87bf64738ab4e31be036a7165608b27 ]

In some cases when a queue related allocation fails, successful past
allocations are freed but the pointer that pointed to them is not
set to NULL. This is a problem for 2 reasons:
1. This is generally a bad practice since this pointer might be
accidentally accessed in the future.
2. Future allocations using the same pointer check if the pointer
is NULL and fail if it is not.

Fixed this by setting such pointers to NULL in the allocation of
queue related objects.

Also refactored the code of ena_setup_tx_resources() to goto-style
error handling to avoid code duplication of resource freeing.

Fixes: 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)")
Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: Sameeh Jubran <sameehj@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: ena: gcc 8: fix compilation warning

[ Upstream commit f913308879bc6ae437ce64d878c7b05643ddea44 ]

GCC 8 contains a number of new warnings as well as enhancements to existing
checkers. The warning - Wstringop-truncation - warns for calls to bounded
string manipulation functions such as strncat, strncpy, and stpncpy that
may either truncate the copied string or leave the destination unchanged.

In our case the destination string length (32 bytes) is much shorter than
the source string (64 bytes) which causes this warning to show up. In
general the destination has to be at least a byte larger than the length
of the source string with strncpy for this warning not to showup.

This can be easily fixed by using strlcpy instead which already does the
truncation to the string. Documentation for this function can be
found here:

https://elixir.bootlin.com/linux/latest/source/lib/string.c#L141

Fixes: 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)")
Signed-off-by: Sameeh Jubran <sameehj@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dmaengine: tegra210-dma: free dma controller in remove()

[ Upstream commit f030e419501cb95e961e9ed35c493b5d46a04eca ]

Following kernel panic is seen during DMA driver unload->load sequence
==========================================================================
Unable to handle kernel paging request at virtual address ffffff8001198880
Internal error: Oops: 86000007 [#1] PREEMPT SMP
CPU: 0 PID: 5907 Comm: HwBinder:4123_1 Tainted: G C 4.9.128-tegra-g065839f
Hardware name: galen (DT)
task: ffffffc3590d1a80 task.stack: ffffffc3d0678000
PC is at 0xffffff8001198880
LR is at of_dma_request_slave_channel+0xd8/0x1f8
pc : [<ffffff8001198880>] lr : [<ffffff8008746f30>] pstate: 60400045
sp : ffffffc3d067b710
x29: ffffffc3d067b710 x28: 000000000000002f
x27: ffffff800949e000 x26: ffffff800949e750
x25: ffffff800949e000 x24: ffffffbefe817d84
x23: ffffff8009f77cb0 x22: 0000000000000028
x21: ffffffc3ffda49c8 x20: 0000000000000029
x19: 0000000000000001 x18: ffffffffffffffff
x17: 0000000000000000 x16: ffffff80082b66a0
x15: ffffff8009e78250 x14: 000000000000000a
x13: 0000000000000038 x12: 0101010101010101
x11: 0000000000000030 x10: 0101010101010101
x9 : fffffffffffffffc x8 : 7f7f7f7f7f7f7f7f
x7 : 62ff726b6b64622c x6 : 0000000000008064
x5 : 6400000000000000 x4 : ffffffbefe817c44
x3 : ffffffc3ffda3e08 x2 : ffffff8001198880
x1 : ffffffc3d48323c0 x0 : ffffffc3d067b788

Process HwBinder:4123_1 (pid: 5907, stack limit = 0xffffffc3d0678028)
Call trace:
[<ffffff8001198880>] 0xffffff8001198880
[<ffffff80087459f8>] dma_request_chan+0x50/0x1f0
[<ffffff8008745bc0>] dma_request_slave_channel+0x28/0x40
[<ffffff8001552c44>] tegra_alt_pcm_open+0x114/0x170
[<ffffff8008d65fa4>] soc_pcm_open+0x10c/0x878
[<ffffff8008d18618>] snd_pcm_open_substream+0xc0/0x170
[<ffffff8008d1878c>] snd_pcm_open+0xc4/0x240
[<ffffff8008d189e0>] snd_pcm_playback_open+0x58/0x80
[<ffffff8008cfc6d4>] snd_open+0xb4/0x178
[<ffffff8008250628>] chrdev_open+0xb8/0x1d0
[<ffffff8008246fdc>] do_dentry_open+0x214/0x318
[<ffffff80082485d0>] vfs_open+0x58/0x88
[<ffffff800825bce0>] do_last+0x450/0xde0
[<ffffff800825c718>] path_openat+0xa8/0x368
[<ffffff800825dd84>] do_filp_open+0x8c/0x110
[<ffffff8008248a74>] do_sys_open+0x164/0x220
[<ffffff80082b66dc>] compat_SyS_openat+0x3c/0x50
[<ffffff8008083040>] el0_svc_naked+0x34/0x38
---[ end trace 67e6d544e65b5145 ]---
Kernel panic - not syncing: Fatal exception
==========================================================================

In device probe(), of_dma_controller_register() registers DMA controller.
But when driver is removed, this is not freed. During driver reload this
results in data abort and kernel panic. Add of_dma_controller_free() in
driver remove path to fix the issue.

Fixes: f46b195799b5 ("dmaengine: tegra-adma: Add support for Tegra210 ADMA")
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

blk-mq: grab .q_usage_counter when queuing request from plug code path

[ Upstream commit e87eb301bee183d82bb3d04bd71b6660889a2588 ]

Just like aio/io_uring, we need to grab 2 refcount for queuing one
request, one is for submission, another is for completion.

If the request isn't queued from plug code path, the refcount grabbed
in generic_make_request() serves for submission. In theroy, this
refcount should have been released after the sumission(async run queue)
is done. blk_freeze_queue() works with blk_sync_queue() together
for avoiding race between cleanup queue and IO submission, given async
run queue activities are canceled because hctx->run_work is scheduled with
the refcount held, so it is fine to not hold the refcount when
running the run queue work function for dispatch IO.

However, if request is staggered into plug list, and finally queued
from plug code path, the refcount in submission side is actually missed.
And we may start to run queue after queue is removed because the queue's
kobject refcount isn't guaranteed to be grabbed in flushing plug list
context, then kernel oops is triggered, see the following race:

blk_mq_flush_plug_list():
        blk_mq_sched_insert_requests()
                insert requests to sw queue or scheduler queue
                blk_mq_run_hw_queue

Because of concurrent run queue, all requests inserted above may be
completed before calling the above blk_mq_run_hw_queue. Then queue can
be freed during the above blk_mq_run_hw_queue().

Fixes the issue by grab .q_usage_counter before calling
blk_mq_sched_insert_requests() in blk_mq_flush_plug_list(). This way is
safe because the queue is absolutely alive before inserting request.

Cc: Dongli Zhang <dongli.zhang@oracle.com>
Cc: James Smart <james.smart@broadcom.com>
Cc: linux-scsi@vger.kernel.org,
Cc: Martin K . Petersen <martin.petersen@oracle.com>,
Cc: Christoph Hellwig <hch@lst.de>,
Cc: James E . J . Bottomley <jejb@linux.vnet.ibm.com>,
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Tested-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

blk-mq: split blk_mq_alloc_and_init_hctx into two parts

[ Upstream commit 7c6c5b7c9186e3fb5b10afb8e5f710ae661144c6 ]

Split blk_mq_alloc_and_init_hctx into two parts, and one is
blk_mq_alloc_hctx() for allocating all hctx resources, another
is blk_mq_init_hctx() for initializing hctx, which serves as
counter-part of blk_mq_exit_hctx().

Cc: Dongli Zhang <dongli.zhang@oracle.com>
Cc: James Smart <james.smart@broadcom.com>
Cc: Bart Van Assche <bart.vanassche@wdc.com>
Cc: linux-scsi@vger.kernel.org
Cc: Martin K . Petersen <martin.petersen@oracle.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: James E . J . Bottomley <jejb@linux.vnet.ibm.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ice: Preserve VLAN Rx stripping settings

[ Upstream commit e80e76db6c5bbc7a8f8512f3dc630a2170745b0b ]

When Tx insertion is set, we are not accounting for the state of Rx
stripping. This causes Rx stripping to be enabled any time Tx
insertion is changed, even when it's supposed to be disabled.

Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ice: Separate if conditions for ice_set_features()

[ Upstream commit 8f529ff912073f778e3cd74e87fb69a36499fc2f ]

Set features can have multiple features turned on|off in a single
call. Grouping these all in an if/else means after one condition
is met, other conditions/features will not be evaluated. Break
the if/else statements by feature to ensure all features will be
handled properly.

Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpftool: exclude bash-completion/bpftool from .gitignore pattern

[ Upstream commit a7d006714724de4334c5e3548701b33f7b12ca96 ]

tools/bpf/bpftool/.gitignore has the "bpftool" pattern, which is
intended to ignore the following build artifact:

tools/bpf/bpftool/bpftool

However, the .gitignore entry is effective not only for the current
directory, but also for any sub-directories.

So, from the point of .gitignore grammar, the following check-in file
is also considered to be ignored:

tools/bpf/bpftool/bash-completion/bpftool

As the manual gitignore(5) says "Files already tracked by Git are not
affected", this is not a problem as far as Git is concerned.

However, Git is not the only program that parses .gitignore because
.gitignore is useful to distinguish build artifacts from source files.

For example, tar(1) supports the --exclude-vcs-ignore option. As of
writing, this option does not work perfectly, but it intends to create
a tarball excluding files specified by .gitignore.

So, I believe it is better to fix this issue.

You can fix it by prefixing the pattern with a slash; the leading slash
means the specified pattern is relative to the current directory.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests/bpf: set RLIMIT_MEMLOCK properly for test_libbpf_open.c

[ Upstream commit 6cea33701eb024bc6c920ab83940ee22afd29139 ]

Test test_libbpf.sh failed on my development server with failure
  -bash-4.4$ sudo ./test_libbpf.sh
  [0] libbpf: Error in bpf_object__probe_name():Operation not permitted(1).
      Couldn't load basic 'r0 = 0' BPF program.
  test_libbpf: failed at file test_l4lb.o
  selftests: test_libbpf [FAILED]
  -bash-4.4$

The reason is because my machine has 64KB locked memory by default which
is not enough for this program to get locked memory.
Similar to other bpf selftests, let us increase RLIMIT_MEMLOCK
to infinity, which fixed the issue.

Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

libbpf: fix invalid munmap call

[ Upstream commit 0e6741f092979535d159d5a851f12c88bfb7cb9a ]

When unmapping the AF_XDP memory regions used for the rings, an
invalid address was passed to the munmap() calls. Instead of passing
the beginning of the memory region, the descriptor region was passed
to munmap.

When the userspace application tried to tear down an AF_XDP socket,
the operation failed and the application would still have a reference
to socket it wished to get rid of.

Reported-by: William Tu <u9012063@gmail.com>
Fixes: 1cad07884239 ("libbpf: add support for using AF_XDP sockets")
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Tested-by: William Tu <u9012063@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

i40e: Fix of memory leak and integer truncation in i40e_virtchnl.c

[ Upstream commit 24474f2709af6729b9b1da1c5e160ab62e25e3a4 ]

Fixed possible memory leak in i40e_vc_add_cloud_filter function:
cfilter is being allocated and in some error conditions
the function returns without freeing the memory.

Fix of integer truncation from u16 (type of queue_id value) to u8
when calling i40e_vc_isvalid_queue_id function.

Signed-off-by: Martyna Szapar <martyna.szapar@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tools/bpf: fix perf build error with uClibc (seen on ARC)

[ Upstream commit ca31ca8247e2d3807ff5fa1d1760616a2292001c ]

When build perf for ARC recently, there was a build failure due to lack
of __NR_bpf.

| Auto-detecting system features:
|
| ...                     get_cpuid: [ OFF ]
| ...                           bpf: [ on  ]
|
| #  error __NR_bpf not defined. libbpf does not support your arch.
    ^~~~~
| bpf.c: In function 'sys_bpf':
| bpf.c:66:17: error: '__NR_bpf' undeclared (first use in this function)
|  return syscall(__NR_bpf, cmd, attr, size);
|                 ^~~~~~~~
|                 sys_bpf

Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mmc: core: Verify SD bus width

[ Upstream commit 9e4be8d03f50d1b25c38e2b59e73b194c130df7d ]

The SD Physical Layer Spec says the following: Since the SD Memory Card
shall support at least the two bus modes 1-bit or 4-bit width, then any SD
Card shall set at least bits 0 and 2 (SD_BUS_WIDTH="0101").

This change verifies the card has specified a bus width.

AMD SDHC Device 7806 can get into a bad state after a card disconnect
where anything transferred via the DATA lines will always result in a
zero filled buffer. Currently the driver will continue without error if
the HC is in this condition. A block device will be created, but reading
from it will result in a zero buffer. This makes it seem like the SD
device has been erased, when in actuality the data is never getting
copied from the DATA lines to the data buffer.

SCR is the first command in the SD initialization sequence that uses the
DATA lines. By checking that the response was invalid, we can abort
mounting the card.

Reviewed-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

gfs2: Fix occasional glock use-after-free

[ Upstream commit 9287c6452d2b1f24ea8e84bd3cf6f3c6f267f712 ]

This patch has to do with the life cycle of glocks and buffers.  When
gfs2 metadata or journaled data is queued to be written, a gfs2_bufdata
object is assigned to track the buffer, and that is queued to various
lists, including the glock's gl_ail_list to indicate it's on the active
items list.  Once the page associated with the buffer has been written,
it is removed from the ail list, but its life isn't over until a revoke
has been successfully written.

So after the block is written, its bufdata object is moved from the
glock's gl_ail_list to a file-system-wide list of pending revokes,
sd_log_le_revoke.  At that point the glock still needs to track how many
revokes it contributed to that list (in gl_revokes) so that things like
glock go_sync can ensure all the metadata has been not only written, but
also revoked before the glock is granted to a different node.  This is
to guarantee journal replay doesn't replay the block once the glock has
been granted to another node.

Ross Lagerwall recently discovered a race in which an inode could be
evicted, and its glock freed after its ail list had been synced, but
while it still had unwritten revokes on the sd_log_le_revoke list.  The
evict decremented the glock reference count to zero, which allowed the
glock to be freed.  After the revoke was written, function
revoke_lo_after_commit tried to adjust the glock's gl_revokes counter
and clear its GLF_LFLUSH flag, at which time it referenced the freed
glock.

This patch fixes the problem by incrementing the glock reference count
in gfs2_add_revoke when the glock's first bufdata object is moved from
the glock to the global revokes list. Later, when the glock's last such
bufdata object is freed, the reference count is decremented. This
guarantees that whichever process finishes last (the revoke writing or
the evict) will properly free the glock, and neither will reference the
glock after it has been freed.

Reported-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

IB/hfi1: Fix WQ_MEM_RECLAIM warning

[ Upstream commit 4c4b1996b5db688e2dcb8242b0a3bf7b1e845e42 ]

The work_item cancels that occur when a QP is destroyed can elicit the
following trace:

workqueue: WQ_MEM_RECLAIM ipoib_wq:ipoib_cm_tx_reap [ib_ipoib] is flushing !WQ_MEM_RECLAIM hfi0_0:_hfi1_do_send [hfi1]
WARNING: CPU: 7 PID: 1403 at kernel/workqueue.c:2486 check_flush_dependency+0xb1/0x100
Call Trace:
  __flush_work.isra.29+0x8c/0x1a0
  ? __switch_to_asm+0x40/0x70
  __cancel_work_timer+0x103/0x190
  ? schedule+0x32/0x80
  iowait_cancel_work+0x15/0x30 [hfi1]
  rvt_reset_qp+0x1f8/0x3e0 [rdmavt]
  rvt_destroy_qp+0x65/0x1f0 [rdmavt]
  ? _cond_resched+0x15/0x30
  ib_destroy_qp+0xe9/0x230 [ib_core]
  ipoib_cm_tx_reap+0x21c/0x560 [ib_ipoib]
  process_one_work+0x171/0x370
  worker_thread+0x49/0x3f0
  kthread+0xf8/0x130
  ? max_active_store+0x80/0x80
  ? kthread_bind+0x10/0x10
  ret_from_fork+0x35/0x40

Since QP destruction frees memory, hfi1_wq should have the WQ_MEM_RECLAIM.

The hfi1_wq does not allocate memory with GFP_KERNEL or otherwise become
entangled with memory reclaim, so this flag is appropriate.

Fixes: 0a226edd203f ("staging/rdma/hfi1: Use parallel workqueue for SDMA engines")
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

io_uring: use cpu_online() to check p->sq_thread_cpu instead of cpu_possible()

[ Upstream commit 7889f44dd9cee15aff1c3f7daf81ca4dfed48fc7 ]

This issue is found by running liburing/test/io_uring_setup test.

When test run, the testcase "attempt to bind to invalid cpu" would not
pass with messages like:
   io_uring_setup(1, 0xbfc2f7c8), \
flags: IORING_SETUP_SQPOLL|IORING_SETUP_SQ_AFF, \
resv: 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000, \
sq_thread_cpu: 2
   expected -1, got 3
   FAIL

On my system, there is:
   CPU(s) possible : 0-3
   CPU(s) online   : 0-1
   CPU(s) offline  : 2-3
   CPU(s) present  : 0-1

The sq_thread_cpu 2 is offline on my system, so the bind should fail.
But cpu_possible() will pass the check. We shouldn't be able to bind
to an offline cpu. Use cpu_online() to do the check.

After the change, the testcase run as expected: EINVAL will be returned
for cpu offlined.

Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Shenghui Wang <shhuiw@foxmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

gfs2: fix race between gfs2_freeze_func and unmount

[ Upstream commit 8f91821990fd6f170a5dca79697a441181a41b16 ]

As part of the freeze operation, gfs2_freeze_func() is left blocking
on a request to hold the sd_freeze_gl in SH. This glock is held in EX
by the gfs2_freeze() code.

A subsequent call to gfs2_unfreeze() releases the EXclusively held
sd_freeze_gl, which allows gfs2_freeze_func() to acquire it in SH and
resume its operation.

gfs2_unfreeze(), however, doesn't wait for gfs2_freeze_func() to complete.
If a umount is issued right after unfreeze, it could result in an
inconsistent filesystem because some journal data (statfs update) isn't
written out.

Refer to commit 24972557b12c for a more detailed explanation of how
freeze/unfreeze work.

This patch causes gfs2_unfreeze() to wait for gfs2_freeze_func() to
complete before returning to the user.

Signed-off-by: Abhi Das <adas@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

NFS: make nfs_match_client killable

[ Upstream commit 950a578c6128c2886e295b9c7ecb0b6b22fcc92b ]

    Actually we don't do anything with return value from
    nfs_wait_client_init_complete in nfs_match_client, as a
    consequence if we get a fatal signal and client is not
    fully initialised, we'll loop to "again" label

    This has been proven to cause soft lockups on some scenarios
    (no-carrier but configured network interfaces)

Signed-off-by: Roberto Bergantinos Corpas <rbergant@redhat.com>
Reviewed-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

afs: Fix getting the afs.fid xattr

[ Upstream commit a2f611a3dc317d8ea1c98ad6c54b911cf7f93193 ]

The AFS3 FID is three 32-bit unsigned numbers and is represented as three
up-to-8-hex-digit numbers separated by colons to the afs.fid xattr.
However, with the advent of support for YFS, the FID is now a 64-bit volume
number, a 96-bit vnode/inode number and a 32-bit uniquifier (as before).
Whilst the sprintf in afs_xattr_get_fid() has been partially updated (it
currently ignores the upper 32 bits of the 96-bit vnode number), the size
of the stack-based buffer has not been increased to match, thereby allowing
stack corruption to occur.

Fix this by increasing the buffer size appropriately and conditionally
including the upper part of the vnode number if it is non-zero. The latter
requires the lower part to be zero-padded if the upper part is non-zero.

Fixes: 3b6492df4153 ("afs: Increase to 64-bit volume ID and 96-bit vnode ID for YFS")
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cxgb4: Fix error path in cxgb4_init_module

[ Upstream commit a3147770bea76c8dbad73eca3a24c2118da5e719 ]

BUG: unable to handle kernel paging request at ffffffffa016a270
PGD 3270067 P4D 3270067 PUD 3271063 PMD 230bbd067 PTE 0
Oops: 0000 [#1
CPU: 0 PID: 6134 Comm: modprobe Not tainted 5.1.0+ #33
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.3-0-ge2fc41e-prebuilt.qemu-project.org 04/01/2014
RIP: 0010:atomic_notifier_chain_register+0x24/0x60
Code: 1f 80 00 00 00 00 55 48 89 e5 41 54 49 89 f4 53 48 89 fb e8 ae b4 38 01 48 8b 53 38 48 8d 4b 38 48 85 d2 74 20 45 8b 44 24 10 <44> 3b 42 10 7e 08 eb 13 44 39 42 10 7c 0d 48 8d 4a 08 48 8b 52 08
RSP: 0018:ffffc90000e2bc60 EFLAGS: 00010086
RAX: 0000000000000292 RBX: ffffffff83467240 RCX: ffffffff83467278
RDX: ffffffffa016a260 RSI: ffffffff83752140 RDI: ffffffff83467240
RBP: ffffc90000e2bc70 R08: 0000000000000000 R09: 0000000000000001
R10: 0000000000000000 R11: 00000000014fa61f R12: ffffffffa01c8260
R13: ffff888231091e00 R14: 0000000000000000 R15: ffffc90000e2be78
FS: 00007fbd8d7cd540(0000) GS:ffff888237a00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffffffa016a270 CR3: 000000022c7e3000 CR4: 00000000000006f0
Call Trace:
register_inet6addr_notifier+0x13/0x20
cxgb4_init_module+0x6c/0x1000 [cxgb4
? 0xffffffffa01d7000
do_one_initcall+0x6c/0x3cc
? do_init_module+0x22/0x1f1
? rcu_read_lock_sched_held+0x97/0xb0
? kmem_cache_alloc_trace+0x325/0x3b0
do_init_module+0x5b/0x1f1
load_module+0x1db1/0x2690
? m_show+0x1d0/0x1d0
__do_sys_finit_module+0xc5/0xd0
__x64_sys_finit_module+0x15/0x20
do_syscall_64+0x6b/0x1d0
entry_SYSCALL_64_after_hwframe+0x49/0xbe

If pci_register_driver fails, register inet6addr_notifier is
pointless. This patch fix the error path in cxgb4_init_module.

Fixes: b5a02f503caa ("cxgb4 : Update ipv6 address handling api")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

gfs2: Fix lru_count going negative

[ Upstream commit 7881ef3f33bb80f459ea6020d1e021fc524a6348 ]

Under certain conditions, lru_count may drop below zero resulting in
a large amount of log spam like this:

vmscan: shrink_slab: gfs2_dump_glock+0x3b0/0x630 [gfs2] \
    negative objects to delete nr=-1

This happens as follows:
1) A glock is moved from lru_list to the dispose list and lru_count is
   decremented.
2) The dispose function calls cond_resched() and drops the lru lock.
3) Another thread takes the lru lock and tries to add the same glock to
   lru_list, checking if the glock is on an lru list.
4) It is on a list (actually the dispose list) and so it avoids
   incrementing lru_count.
5) The glock is moved to lru_list.
5) The original thread doesn't dispose it because it has been re-added
   to the lru list but the lru_count has still decreased by one.

Fix by checking if the LRU flag is set on the glock rather than checking
if the glock is on some list and rearrange the code so that the LRU flag
is added/removed precisely when the glock is added/removed from lru_list.

Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Revert "btrfs: Honour FITRIM range constraints during free space trim"

This reverts commit eb432217d775a90c061681c0dfa3c7abfba75123.

There is currently no corresponding patch in master due to additional
changes that would be significantly different from plain revert in the
respective stable branch.

The range argument was not handled correctly and could cause trim to
overlap allocated areas or reach beyond the end of the device. The
address space that fitrim normally operates on is in logical
coordinates, while the discards are done on the physical device extents.
This distinction cannot be made with the current ioctl interface and
caused the confusion.

The bug depends on the layout of block groups and does not always
happen. The whole-fs trim (run by default by the fstrim tool) is not
affected.

Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netfilter: ctnetlink: Resolve conntrack L3-protocol flush regression

commit f8e608982022fad035160870f5b06086d3cba54d upstream.

Commit 59c08c69c278 ("netfilter: ctnetlink: Support L3 protocol-filter
on flush") introduced a user-space regression when flushing connection
track entries. Before this commit, the nfgen_family field was not used
by the kernel and all entries were removed. Since this commit,
nfgen_family is used to filter out entries that should not be removed.
One example a broken tool is conntrack. conntrack always sets
nfgen_family to AF_INET, so after 59c08c69c278 only IPv4 entries were
removed with the -F parameter.

Pablo Neira Ayuso suggested using nfgenmsg->version to resolve the
regression, and this commit implements his suggestion. nfgenmsg->version
is so far set to zero, so it is well-suited to be used as a flag for
selecting old or new flush behavior. If version is 0, nfgen_family is
ignored and all entries are used. If user-space sets the version to one
(or any other value than 0), then the new behavior is used. As version
only can have two valid values, I chose not to add a new
NFNETLINK_VERSION-constant.

Fixes: 59c08c69c278 ("netfilter: ctnetlink: Support L3 protocol-filter on flush")
Reported-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Suggested-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Kristian Evensen <kristian.evensen@gmail.com>
Tested-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

acct_on(): don't mess with freeze protection

commit 9419a3191dcb27f24478d288abaab697228d28e6 upstream.

What happens there is that we are replacing file->path.mnt of
a file we'd just opened with a clone and we need the write
count contribution to be transferred from original mount to
new one. That's it. We do *NOT* want any kind of freeze
protection for the duration of switchover.

IOW, we should just use __mnt_{want,drop}_write() for that
switchover; no need to bother with mnt_{want,drop}_write()
there.

Tested-by: Amir Goldstein <amir73il@gmail.com>
Reported-by: syzbot+2a73a6ea9507b7112141@syzkaller.appspotmail.com
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

at76c50x-usb: Don't register led_trigger if usb_register_driver failed

commit 09ac2694b0475f96be895848687ebcbba97eeecf upstream.

Syzkaller report this:

[ 1213.468581] BUG: unable to handle kernel paging request at fffffbfff83bf338
[ 1213.469530] #PF error: [normal kernel read fault]
[ 1213.469530] PGD 237fe4067 P4D 237fe4067 PUD 237e60067 PMD 1c868b067 PTE 0
[ 1213.473514] Oops: 0000 [#1] SMP KASAN PTI
[ 1213.473514] CPU: 0 PID: 6321 Comm: syz-executor.0 Tainted: G         C        5.1.0-rc3+ #8
[ 1213.473514] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
[ 1213.473514] RIP: 0010:strcmp+0x31/0xa0
[ 1213.473514] Code: 00 00 00 00 fc ff df 55 53 48 83 ec 08 eb 0a 84 db 48 89 ef 74 5a 4c 89 e6 48 89 f8 48 89 fa 48 8d 6f 01 48 c1 e8 03 83 e2 07 <42> 0f b6 04 28 38 d0 7f 04 84 c0 75 50 48 89 f0 48 89 f2 0f b6 5d
[ 1213.473514] RSP: 0018:ffff8881f2b7f950 EFLAGS: 00010246
[ 1213.473514] RAX: 1ffffffff83bf338 RBX: ffff8881ea6f7240 RCX: ffffffff825350c6
[ 1213.473514] RDX: 0000000000000000 RSI: ffffffffc1ee19c0 RDI: ffffffffc1df99c0
[ 1213.473514] RBP: ffffffffc1df99c1 R08: 0000000000000001 R09: 0000000000000004
[ 1213.473514] R10: 0000000000000000 R11: ffff8881de353f00 R12: ffff8881ee727900
[ 1213.473514] R13: dffffc0000000000 R14: 0000000000000001 R15: ffffffffc1eeaaf0
[ 1213.473514] FS:  00007fa66fa01700(0000) GS:ffff8881f7200000(0000) knlGS:0000000000000000
[ 1213.473514] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1213.473514] CR2: fffffbfff83bf338 CR3: 00000001ebb9e005 CR4: 00000000007606f0
[ 1213.473514] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 1213.473514] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 1213.473514] PKRU: 55555554
[ 1213.473514] Call Trace:
[ 1213.473514]  led_trigger_register+0x112/0x3f0
[ 1213.473514]  led_trigger_register_simple+0x7a/0x110
[ 1213.473514]  ? 0xffffffffc1c10000
[ 1213.473514]  at76_mod_init+0x77/0x1000 [at76c50x_usb]
[ 1213.473514]  do_one_initcall+0xbc/0x47d
[ 1213.473514]  ? perf_trace_initcall_level+0x3a0/0x3a0
[ 1213.473514]  ? kasan_unpoison_shadow+0x30/0x40
[ 1213.473514]  ? kasan_unpoison_shadow+0x30/0x40
[ 1213.473514]  do_init_module+0x1b5/0x547
[ 1213.473514]  load_module+0x6405/0x8c10
[ 1213.473514]  ? module_frob_arch_sections+0x20/0x20
[ 1213.473514]  ? kernel_read_file+0x1e6/0x5d0
[ 1213.473514]  ? find_held_lock+0x32/0x1c0
[ 1213.473514]  ? cap_capable+0x1ae/0x210
[ 1213.473514]  ? __do_sys_finit_module+0x162/0x190
[ 1213.473514]  __do_sys_finit_module+0x162/0x190
[ 1213.473514]  ? __ia32_sys_init_module+0xa0/0xa0
[ 1213.473514]  ? __mutex_unlock_slowpath+0xdc/0x690
[ 1213.473514]  ? wait_for_completion+0x370/0x370
[ 1213.473514]  ? vfs_write+0x204/0x4a0
[ 1213.473514]  ? do_syscall_64+0x18/0x450
[ 1213.473514]  do_syscall_64+0x9f/0x450
[ 1213.473514]  entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 1213.473514] RIP: 0033:0x462e99
[ 1213.473514] Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48
[ 1213.473514] RSP: 002b:00007fa66fa00c58 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
[ 1213.473514] RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99
[ 1213.473514] RDX: 0000000000000000 RSI: 0000000020000300 RDI: 0000000000000003
[ 1213.473514] RBP: 00007fa66fa00c70 R08: 0000000000000000 R09: 0000000000000000
[ 1213.473514] R10: 0000000000000000 R11: 0000000000000246 R12: 00007fa66fa016bc
[ 1213.473514] R13: 00000000004bcefa R14: 00000000006f6fb0 R15: 0000000000000004

If usb_register failed, no need to call led_trigger_register_simple.

Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes: 1264b951463a ("at76c50x-usb: add driver")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

batman-adv: mcast: fix multicast tt/tvlv worker locking

commit a3c7cd0cdf1107f891aff847ad481e34df727055 upstream.

Syzbot has reported some issues with the locking assumptions made for
the multicast tt/tvlv worker: It was able to trigger the WARN_ON() in
batadv_mcast_mla_tt_retract() and batadv_mcast_mla_tt_add().
While hard/not reproduceable for us so far it seems that the
delayed_work_pending() we use might not be quite safe from reordering.

Therefore this patch adds an explicit, new spinlock to protect the
update of the mla_list and flags in bat_priv and then removes the
WARN_ON(delayed_work_pending()).

Reported-by: syzbot+83f2d54ec6b7e417e13f@syzkaller.appspotmail.com
Reported-by: syzbot+050927a651272b145a5d@syzkaller.appspotmail.com
Reported-by: syzbot+979ffc89b87309b1b94b@syzkaller.appspotmail.com
Reported-by: syzbot+f9f3f388440283da2965@syzkaller.appspotmail.com
Fixes: cbebd363b2e9 ("batman-adv: Use own timer for multicast TT and TVLV updates")
Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bpf: devmap: fix use-after-free Read in __dev_map_entry_free

commit 2baae3545327632167c0180e9ca1d467416f1919 upstream.

synchronize_rcu() is fine when the rcu callbacks only need
to free memory (kfree_rcu() or direct kfree() call rcu call backs)

__dev_map_entry_free() is a bit more complex, so we need to make
sure that call queued __dev_map_entry_free() callbacks have completed.

sysbot report:

BUG: KASAN: use-after-free in dev_map_flush_old kernel/bpf/devmap.c:365
[inline]
BUG: KASAN: use-after-free in __dev_map_entry_free+0x2a8/0x300
kernel/bpf/devmap.c:379
Read of size 8 at addr ffff8801b8da38c8 by task ksoftirqd/1/18

CPU: 1 PID: 18 Comm: ksoftirqd/1 Not tainted 4.17.0+ #39
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
Google 01/01/2011
Call Trace:
  __dump_stack lib/dump_stack.c:77 [inline]
  dump_stack+0x1b9/0x294 lib/dump_stack.c:113
  print_address_description+0x6c/0x20b mm/kasan/report.c:256
  kasan_report_error mm/kasan/report.c:354 [inline]
  kasan_report.cold.7+0x242/0x2fe mm/kasan/report.c:412
  __asan_report_load8_noabort+0x14/0x20 mm/kasan/report.c:433
  dev_map_flush_old kernel/bpf/devmap.c:365 [inline]
  __dev_map_entry_free+0x2a8/0x300 kernel/bpf/devmap.c:379
  __rcu_reclaim kernel/rcu/rcu.h:178 [inline]
  rcu_do_batch kernel/rcu/tree.c:2558 [inline]
  invoke_rcu_callbacks kernel/rcu/tree.c:2818 [inline]
  __rcu_process_callbacks kernel/rcu/tree.c:2785 [inline]
  rcu_process_callbacks+0xe9d/0x1760 kernel/rcu/tree.c:2802
  __do_softirq+0x2e0/0xaf5 kernel/softirq.c:284
  run_ksoftirqd+0x86/0x100 kernel/softirq.c:645
  smpboot_thread_fn+0x417/0x870 kernel/smpboot.c:164
  kthread+0x345/0x410 kernel/kthread.c:240
  ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:412

Allocated by task 6675:
  save_stack+0x43/0xd0 mm/kasan/kasan.c:448
  set_track mm/kasan/kasan.c:460 [inline]
  kasan_kmalloc+0xc4/0xe0 mm/kasan/kasan.c:553
  kmem_cache_alloc_trace+0x152/0x780 mm/slab.c:3620
  kmalloc include/linux/slab.h:513 [inline]
  kzalloc include/linux/slab.h:706 [inline]
  dev_map_alloc+0x208/0x7f0 kernel/bpf/devmap.c:102
  find_and_alloc_map kernel/bpf/syscall.c:129 [inline]
  map_create+0x393/0x1010 kernel/bpf/syscall.c:453
  __do_sys_bpf kernel/bpf/syscall.c:2351 [inline]
  __se_sys_bpf kernel/bpf/syscall.c:2328 [inline]
  __x64_sys_bpf+0x303/0x510 kernel/bpf/syscall.c:2328
  do_syscall_64+0x1b1/0x800 arch/x86/entry/common.c:290
  entry_SYSCALL_64_after_hwframe+0x49/0xbe

Freed by task 26:
  save_stack+0x43/0xd0 mm/kasan/kasan.c:448
  set_track mm/kasan/kasan.c:460 [inline]
  __kasan_slab_free+0x11a/0x170 mm/kasan/kasan.c:521
  kasan_slab_free+0xe/0x10 mm/kasan/kasan.c:528
  __cache_free mm/slab.c:3498 [inline]
  kfree+0xd9/0x260 mm/slab.c:3813
  dev_map_free+0x4fa/0x670 kernel/bpf/devmap.c:191
  bpf_map_free_deferred+0xba/0xf0 kernel/bpf/syscall.c:262
  process_one_work+0xc64/0x1b70 kernel/workqueue.c:2153
  worker_thread+0x181/0x13a0 kernel/workqueue.c:2296
  kthread+0x345/0x410 kernel/kthread.c:240
  ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:412

The buggy address belongs to the object at ffff8801b8da37c0
  which belongs to the cache kmalloc-512 of size 512
The buggy address is located 264 bytes inside of
  512-byte region [ffff8801b8da37c0, ffff8801b8da39c0)
The buggy address belongs to the page:
page:ffffea0006e368c0 count:1 mapcount:0 mapping:ffff8801da800940
index:0xffff8801b8da3540
flags: 0x2fffc0000000100(slab)
raw: 02fffc0000000100 ffffea0007217b88 ffffea0006e30cc8 ffff8801da800940
raw: ffff8801b8da3540 ffff8801b8da3040 0000000100000004 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
  ffff8801b8da3780: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb
  ffff8801b8da3800: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
> ffff8801b8da3880: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
                                               ^
  ffff8801b8da3900: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
  ffff8801b8da3980: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc

Fixes: 546ac1ffb70d ("bpf: add devmap, a map for storing net device references")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot+457d3e2ffbcf31aee5c0@syzkaller.appspotmail.com
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ssb: Fix possible NULL pointer dereference in ssb_host_pcmcia_exit

commit b2c01aab9646ed8ffb7c549afe55d5349c482425 upstream.

Syzkaller report this:

kasan: GPF could be caused by NULL-ptr deref or user memory access
general protection fault: 0000 [#1] SMP KASAN PTI
CPU: 0 PID: 4492 Comm: syz-executor.0 Not tainted 5.0.0-rc7+ #45
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
RIP: 0010:sysfs_remove_file_ns+0x27/0x70 fs/sysfs/file.c:468
Code: 00 00 00 41 54 55 48 89 fd 53 49 89 d4 48 89 f3 e8 ee 76 9c ff 48 8d 7d 30 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <80> 3c 02 00 75 2d 48 89 da 48 b8 00 00 00 00 00 fc ff df 48 8b 6d
RSP: 0018:ffff8881e9d9fc00 EFLAGS: 00010206
RAX: dffffc0000000000 RBX: ffffffff900367e0 RCX: ffffffff81a95952
RDX: 0000000000000006 RSI: ffffc90001405000 RDI: 0000000000000030
RBP: 0000000000000000 R08: fffffbfff1fa22ed R09: fffffbfff1fa22ed
R10: 0000000000000001 R11: fffffbfff1fa22ec R12: 0000000000000000
R13: ffffffffc1abdac0 R14: 1ffff1103d3b3f8b R15: 0000000000000000
FS:  00007fe409dc1700(0000) GS:ffff8881f1200000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000001b2d721000 CR3: 00000001e98b6005 CR4: 00000000007606f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
sysfs_remove_file include/linux/sysfs.h:519 [inline]
driver_remove_file+0x40/0x50 drivers/base/driver.c:122
pcmcia_remove_newid_file drivers/pcmcia/ds.c:163 [inline]
pcmcia_unregister_driver+0x7d/0x2b0 drivers/pcmcia/ds.c:209
ssb_modexit+0xa/0x1b [ssb]
__do_sys_delete_module kernel/module.c:1018 [inline]
__se_sys_delete_module kernel/module.c:961 [inline]
__x64_sys_delete_module+0x3dc/0x5e0 kernel/module.c:961
do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x462e99
Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007fe409dc0c58 EFLAGS: 00000246 ORIG_RAX: 00000000000000b0
RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 00000000200000c0
RBP: 0000000000000002 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00007fe409dc16bc
R13: 00000000004bccaa R14: 00000000006f6bc8 R15: 00000000ffffffff
Modules linked in: ssb(-) 3c59x nvme_core macvlan tap pata_hpt3x3 rt2x00pci null_blk tsc40 pm_notifier_error_inject notifier_error_inject mdio cdc_wdm nf_reject_ipv4 ath9k_common ath9k_hw ath pppox ppp_generic slhc ehci_platform wl12xx wlcore tps6507x_ts ioc4 nf_synproxy_core ide_gd_mod ax25 can_dev iwlwifi can_raw atm tm2_touchkey can_gw can sundance adp5588_keys rt2800mmio rt2800lib rt2x00mmio rt2x00lib eeprom_93cx6 pn533 lru_cache elants_i2c ip_set nfnetlink gameport tipc hampshire nhc_ipv6 nhc_hop nhc_udp nhc_fragment nhc_routing nhc_mobility nhc_dest 6lowpan silead brcmutil nfc mt76_usb mt76 mac80211 iptable_security iptable_raw iptable_mangle iptable_nat nf_nat_ipv4 nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 iptable_filter bpfilter ip6_vti ip_gre sit hsr veth vxcan batman_adv cfg80211 rfkill chnl_net caif nlmon vcan bridge stp llc ip6_gre ip6_tunnel tunnel6 tun joydev mousedev serio_raw ide_pci_generic piix floppy ide_core sch_fq_codel ip_tables x_tables ipv6
[last unloaded: 3c59x]
Dumping ftrace buffer:
   (ftrace buffer empty)
---[ end trace 3913cbf8011e1c05 ]---

In ssb_modinit, it does not fail SSB init when ssb_host_pcmcia_init failed,
however in ssb_modexit, ssb_host_pcmcia_exit calls pcmcia_unregister_driver
unconditionally, which may tigger a NULL pointer dereference issue as above.

Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes: 399500da18f7 ("ssb: pick PCMCIA host code support from b43 driver")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: vivid: use vfree() instead of kfree() for dev->bitmap_cap

commit dad7e270ba712ba1c99cd2d91018af6044447a06 upstream.

syzkaller reported crashes on kfree() called from
vivid_vid_cap_s_selection(). This looks like a simple typo, as
dev->bitmap_cap is allocated with vzalloc() throughout the file.

Fixes: ef834f7836ec0 ("[media] vivid: add the video capture and output
parts")

Signed-off-by: Alexander Potapenko <glider@google.com>
Reported-by: Syzbot <syzbot+6c0effb5877f6b0344e2@syzkaller.appspotmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: vb2: add waiting_in_dqbuf flag

commit d65842f7126aa1a87fb44b7c9980c12630ed4f33 upstream.

Calling VIDIOC_DQBUF can release the core serialization lock pointed to
by vb2_queue->lock if it has to wait for a new buffer to arrive.

However, if userspace dup()ped the video device filehandle, then it is
possible to read or call DQBUF from two filehandles at the same time.

It is also possible to call REQBUFS from one filehandle while the other
is waiting for a buffer. This will remove all the buffers and reallocate
new ones. Removing all the buffers isn't the problem here (that's already
handled correctly by DQBUF), but the reallocating part is: DQBUF isn't
aware that the buffers have changed.

This is fixed by setting a flag whenever the lock is released while waiting
for a buffer to arrive. And checking the flag where needed so we can return
-EBUSY.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Reported-by: Syzbot <syzbot+4180ff9ca6810b06c1e9@syzkaller.appspotmail.com>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: serial_ir: Fix use-after-free in serial_ir_init_module

commit 56cd26b618855c9af48c8301aa6754ced8dd0beb upstream.

Syzkaller report this:

BUG: KASAN: use-after-free in sysfs_remove_file_ns+0x5f/0x70 fs/sysfs/file.c:468
Read of size 8 at addr ffff8881dc7ae030 by task syz-executor.0/6249

CPU: 1 PID: 6249 Comm: syz-executor.0 Not tainted 5.0.0-rc8+ #3
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0xfa/0x1ce lib/dump_stack.c:113
print_address_description+0x65/0x270 mm/kasan/report.c:187
kasan_report+0x149/0x18d mm/kasan/report.c:317
? 0xffffffffc1728000
sysfs_remove_file_ns+0x5f/0x70 fs/sysfs/file.c:468
sysfs_remove_file include/linux/sysfs.h:519 [inline]
driver_remove_file+0x40/0x50 drivers/base/driver.c:122
remove_bind_files drivers/base/bus.c:585 [inline]
bus_remove_driver+0x186/0x220 drivers/base/bus.c:725
driver_unregister+0x6c/0xa0 drivers/base/driver.c:197
serial_ir_init_module+0x169/0x1000 [serial_ir]
do_one_initcall+0xfa/0x5ca init/main.c:887
do_init_module+0x204/0x5f6 kernel/module.c:3460
load_module+0x66b2/0x8570 kernel/module.c:3808
__do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902
do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x462e99
Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f9450132c58 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99
RDX: 0000000000000000 RSI: 0000000020000100 RDI: 0000000000000003
RBP: 00007f9450132c70 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00007f94501336bc
R13: 00000000004bcefa R14: 00000000006f6fb0 R15: 0000000000000004

Allocated by task 6249:
set_track mm/kasan/common.c:85 [inline]
__kasan_kmalloc.constprop.3+0xa0/0xd0 mm/kasan/common.c:495
kmalloc include/linux/slab.h:545 [inline]
kzalloc include/linux/slab.h:740 [inline]
bus_add_driver+0xc0/0x610 drivers/base/bus.c:651
driver_register+0x1bb/0x3f0 drivers/base/driver.c:170
serial_ir_init_module+0xe8/0x1000 [serial_ir]
do_one_initcall+0xfa/0x5ca init/main.c:887
do_init_module+0x204/0x5f6 kernel/module.c:3460
load_module+0x66b2/0x8570 kernel/module.c:3808
__do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902
do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x49/0xbe

Freed by task 6249:
set_track mm/kasan/common.c:85 [inline]
__kasan_slab_free+0x130/0x180 mm/kasan/common.c:457
slab_free_hook mm/slub.c:1430 [inline]
slab_free_freelist_hook mm/slub.c:1457 [inline]
slab_free mm/slub.c:3005 [inline]
kfree+0xe1/0x270 mm/slub.c:3957
kobject_cleanup lib/kobject.c:662 [inline]
kobject_release lib/kobject.c:691 [inline]
kref_put include/linux/kref.h:67 [inline]
kobject_put+0x146/0x240 lib/kobject.c:708
bus_remove_driver+0x10e/0x220 drivers/base/bus.c:732
driver_unregister+0x6c/0xa0 drivers/base/driver.c:197
serial_ir_init_module+0x14c/0x1000 [serial_ir]
do_one_initcall+0xfa/0x5ca init/main.c:887
do_init_module+0x204/0x5f6 kernel/module.c:3460
load_module+0x66b2/0x8570 kernel/module.c:3808
__do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902
do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x49/0xbe

The buggy address belongs to the object at ffff8881dc7ae000
which belongs to the cache kmalloc-256 of size 256
The buggy address is located 48 bytes inside of
256-byte region [ffff8881dc7ae000, ffff8881dc7ae100)
The buggy address belongs to the page:
page:ffffea000771eb80 count:1 mapcount:0 mapping:ffff8881f6c02e00 index:0x0
flags: 0x2fffc0000000200(slab)
raw: 02fffc0000000200 ffffea0007d14800 0000000400000002 ffff8881f6c02e00
raw: 0000000000000000 00000000800c000c 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
ffff8881dc7adf00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ffff8881dc7adf80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>ffff8881dc7ae000: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff8881dc7ae080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff8881dc7ae100: fc fc fc fc fc fc fc fc 00 00 00 00 00 00 00 00

There are already cleanup handlings in serial_ir_init error path,
no need to call serial_ir_exit do it again in serial_ir_init_module,
otherwise will trigger a use-after-free issue.

Fixes: fa5dc29c1fcc ("[media] lirc_serial: move out of staging and rename to serial_ir")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: cpia2: Fix use-after-free in cpia2_exit

commit dea37a97265588da604c6ba80160a287b72c7bfd upstream.

Syzkaller report this:

BUG: KASAN: use-after-free in sysfs_remove_file_ns+0x5f/0x70 fs/sysfs/file.c:468
Read of size 8 at addr ffff8881f59a6b70 by task syz-executor.0/8363

CPU: 0 PID: 8363 Comm: syz-executor.0 Not tainted 5.0.0-rc8+ #3
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0xfa/0x1ce lib/dump_stack.c:113
print_address_description+0x65/0x270 mm/kasan/report.c:187
kasan_report+0x149/0x18d mm/kasan/report.c:317
sysfs_remove_file_ns+0x5f/0x70 fs/sysfs/file.c:468
sysfs_remove_file include/linux/sysfs.h:519 [inline]
driver_remove_file+0x40/0x50 drivers/base/driver.c:122
usb_remove_newid_files drivers/usb/core/driver.c:212 [inline]
usb_deregister+0x12a/0x3b0 drivers/usb/core/driver.c:1005
cpia2_exit+0xa/0x16 [cpia2]
__do_sys_delete_module kernel/module.c:1018 [inline]
__se_sys_delete_module kernel/module.c:961 [inline]
__x64_sys_delete_module+0x3dc/0x5e0 kernel/module.c:961
do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x462e99
Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f86f3754c58 EFLAGS: 00000246 ORIG_RAX: 00000000000000b0
RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000020000300
RBP: 0000000000000002 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00007f86f37556bc
R13: 00000000004bcca9 R14: 00000000006f6b48 R15: 00000000ffffffff

Allocated by task 8363:
set_track mm/kasan/common.c:85 [inline]
__kasan_kmalloc.constprop.3+0xa0/0xd0 mm/kasan/common.c:495
kmalloc include/linux/slab.h:545 [inline]
kzalloc include/linux/slab.h:740 [inline]
bus_add_driver+0xc0/0x610 drivers/base/bus.c:651
driver_register+0x1bb/0x3f0 drivers/base/driver.c:170
usb_register_driver+0x267/0x520 drivers/usb/core/driver.c:965
0xffffffffc1b4817c
do_one_initcall+0xfa/0x5ca init/main.c:887
do_init_module+0x204/0x5f6 kernel/module.c:3460
load_module+0x66b2/0x8570 kernel/module.c:3808
__do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902
do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x49/0xbe

Freed by task 8363:
set_track mm/kasan/common.c:85 [inline]
__kasan_slab_free+0x130/0x180 mm/kasan/common.c:457
slab_free_hook mm/slub.c:1430 [inline]
slab_free_freelist_hook mm/slub.c:1457 [inline]
slab_free mm/slub.c:3005 [inline]
kfree+0xe1/0x270 mm/slub.c:3957
kobject_cleanup lib/kobject.c:662 [inline]
kobject_release lib/kobject.c:691 [inline]
kref_put include/linux/kref.h:67 [inline]
kobject_put+0x146/0x240 lib/kobject.c:708
bus_remove_driver+0x10e/0x220 drivers/base/bus.c:732
driver_unregister+0x6c/0xa0 drivers/base/driver.c:197
usb_register_driver+0x341/0x520 drivers/usb/core/driver.c:980
0xffffffffc1b4817c
do_one_initcall+0xfa/0x5ca init/main.c:887
do_init_module+0x204/0x5f6 kernel/module.c:3460
load_module+0x66b2/0x8570 kernel/module.c:3808
__do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902
do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x49/0xbe

The buggy address belongs to the object at ffff8881f59a6b40
which belongs to the cache kmalloc-256 of size 256
The buggy address is located 48 bytes inside of
256-byte region [ffff8881f59a6b40, ffff8881f59a6c40)
The buggy address belongs to the page:
page:ffffea0007d66980 count:1 mapcount:0 mapping:ffff8881f6c02e00 index:0x0
flags: 0x2fffc0000000200(slab)
raw: 02fffc0000000200 dead000000000100 dead000000000200 ffff8881f6c02e00
raw: 0000000000000000 00000000800c000c 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
ffff8881f59a6a00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ffff8881f59a6a80: 00 00 00 00 00 00 00 00 00 00 fc fc fc fc fc fc
>ffff8881f59a6b00: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb
^
ffff8881f59a6b80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff8881f59a6c00: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc

cpia2_init does not check return value of cpia2_init, if it failed
in usb_register_driver, there is already cleanup using driver_unregister.
No need call cpia2_usb_cleanup on module exit.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fbdev: fix WARNING in __alloc_pages_nodemask bug

commit 8c40292be9169a9cbe19aadd1a6fc60cbd1af82f upstream.

Syzkaller hit 'WARNING in __alloc_pages_nodemask' bug.

WARNING: CPU: 1 PID: 1473 at mm/page_alloc.c:4377
__alloc_pages_nodemask+0x4da/0x2130
Kernel panic - not syncing: panic_on_warn set ...

Call Trace:
alloc_pages_current+0xb1/0x1e0
kmalloc_order+0x1f/0x60
kmalloc_order_trace+0x1d/0x120
fb_alloc_cmap_gfp+0x85/0x2b0
fb_set_user_cmap+0xff/0x370
do_fb_ioctl+0x949/0xa20
fb_ioctl+0xdd/0x120
do_vfs_ioctl+0x186/0x1070
ksys_ioctl+0x89/0xa0
__x64_sys_ioctl+0x74/0xb0
do_syscall_64+0xc8/0x550
entry_SYSCALL_64_after_hwframe+0x49/0xbe

This is a warning about order >= MAX_ORDER and the order is from
userspace ioctl. Add flag __NOWARN to silence this warning.

Signed-off-by: Jiufei Xue <jiufei.xue@linux.alibaba.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ovl: relax WARN_ON() for overlapping layers use case

commit acf3062a7e1ccf67c6f7e7c28671a6708fde63b0 upstream.

This nasty little syzbot repro:
https://syzkaller.appspot.com/x/repro.syz?x=12c7a94f400000

Creates overlay mounts where the same directory is both in upper and lower
layers. Simplified example:

mkdir foo work
mount -t overlay none foo -o"lowerdir=.,upperdir=foo,workdir=work"

The repro runs several threads in parallel that attempt to chdir into foo
and attempt to symlink/rename/exec/mkdir the file bar.

The repro hits a WARN_ON() I placed in ovl_instantiate(), which suggests
that an overlay inode already exists in cache and is hashed by the pointer
of the real upper dentry that ovl_create_real() has just created. At the
point of the WARN_ON(), for overlay dir inode lock is held and upper dir
inode lock, so at first, I did not see how this was possible.

On a closer look, I see that after ovl_create_real(), because of the
overlapping upper and lower layers, a lookup by another thread can find the
file foo/bar that was just created in upper layer, at overlay path
foo/foo/bar and hash the an overlay inode with the new real dentry as lower
dentry. This is possible because the overlay directory foo/foo is not
locked and the upper dentry foo/bar is in dcache, so ovl_lookup() can find
it without taking upper dir inode shared lock.

Overlapping layers is considered a wrong setup which would result in
unexpected behavior, but it shouldn't crash the kernel and it shouldn't
trigger WARN_ON() either, so relax this WARN_ON() and leave a pr_warn()
instead to cover all cases of failure to get an overlay inode.

The error returned from failure to insert new inode to cache with
inode_insert5() was changed to -EEXIST, to distinguish from the error
-ENOMEM returned on failure to get/allocate inode with iget5_locked().

Reported-by: syzbot+9c69c282adc4edd2b540@syzkaller.appspotmail.com
Fixes: 01b39dcc9568 ("ovl: use inode_insert5() to hash a newly...")
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: errata: Add workaround for Cortex-A76 erratum #1463225

commit 969f5ea627570e91c9d54403287ee3ed657f58fe upstream.

Revisions of the Cortex-A76 CPU prior to r4p0 are affected by an erratum
that can prevent interrupts from being taken when single-stepping.

This patch implements a software workaround to prevent userspace from
effectively being able to disable interrupts.

Cc: <stable@vger.kernel.org>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fbdev: fix divide error in fb_var_to_videomode

commit cf84807f6dd0be5214378e66460cfc9187f532f9 upstream.

To fix following divide-by-zero error found by Syzkaller:

  divide error: 0000 [#1] SMP PTI
  CPU: 7 PID: 8447 Comm: test Kdump: loaded Not tainted 4.19.24-8.al7.x86_64 #1
  Hardware name: Alibaba Cloud Alibaba Cloud ECS, BIOS rel-1.12.0-0-ga698c8995f-prebuilt.qemu.org 04/01/2014
  RIP: 0010:fb_var_to_videomode+0xae/0xc0
  Code: 04 44 03 46 78 03 4e 7c 44 03 46 68 03 4e 70 89 ce d1 ee 69 c0 e8 03 00 00 f6 c2 01 0f 45 ce 83 e2 02 8d 34 09 0f 45 ce 31 d2 <41> f7 f0 31 d2 f7 f1 89 47 08 f3 c3 66 0f 1f 44 00 00 0f 1f 44 00
  RSP: 0018:ffffb7e189347bf0 EFLAGS: 00010246
  RAX: 00000000e1692410 RBX: ffffb7e189347d60 RCX: 0000000000000000
  RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffb7e189347c10
  RBP: ffff99972a091c00 R08: 0000000000000000 R09: 0000000000000000
  R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000100
  R13: 0000000000010000 R14: 00007ffd66baf6d0 R15: 0000000000000000
  FS:  00007f2054d11740(0000) GS:ffff99972fbc0000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 00007f205481fd20 CR3: 00000004288a0001 CR4: 00000000001606a0
  Call Trace:
   fb_set_var+0x257/0x390
   ? lookup_fast+0xbb/0x2b0
   ? fb_open+0xc0/0x140
   ? chrdev_open+0xa6/0x1a0
   do_fb_ioctl+0x445/0x5a0
   do_vfs_ioctl+0x92/0x5f0
   ? __alloc_fd+0x3d/0x160
   ksys_ioctl+0x60/0x90
   __x64_sys_ioctl+0x16/0x20
   do_syscall_64+0x5b/0x190
   entry_SYSCALL_64_after_hwframe+0x44/0xa9
  RIP: 0033:0x7f20548258d7
  Code: 44 00 00 48 8b 05 b9 15 2d 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 89 15 2d 00 f7 d8 64 89 01 48

It can be triggered easily with following test code:

  #include <linux/fb.h>
  #include <fcntl.h>
  #include <sys/ioctl.h>
  int main(void)
  {
          struct fb_var_screeninfo var = {.activate = 0x100, .pixclock = 60};
          int fd = open("/dev/fb0", O_RDWR);
          if (fd < 0)
                  return 1;

          if (ioctl(fd, FBIOPUT_VSCREENINFO, &var))
                  return 1;

          return 0;
  }

Signed-off-by: Shile Zhang <shile.zhang@linux.alibaba.com>
Cc: Fredrik Noring <noring@nocrew.org>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Mukesh Ojha <mojha@codeaurora.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: sysfs: don't leak memory when failing add fsid

commit e32773357d5cc271b1d23550b3ed026eb5c2a468 upstream.

A failed call to kobject_init_and_add() must be followed by a call to
kobject_put().  Currently in the error path when adding fs_devices we
are missing this call.  This could be fixed by calling
btrfs_sysfs_remove_fsid() if btrfs_sysfs_add_fsid() returns an error or
by adding a call to kobject_put() directly in btrfs_sysfs_add_fsid().
Here we choose the second option because it prevents the slightly
unusual error path handling requirements of kobject from leaking out
into btrfs functions.

Add a call to kobject_put() in the error path of kobject_add_and_init().
This causes the release method to be called if kobject_init_and_add()
fails.  open_tree() is the function that calls btrfs_sysfs_add_fsid()
and the error code in this function is already written with the
assumption that the release method is called during the error path of
open_tree() (as seen by the call to btrfs_sysfs_remove_fsid() under the
fail_fsdev_sysfs label).

Cc: stable@vger.kernel.org # v4.4+
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Tobin C. Harding <tobin@kernel.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: sysfs: Fix error path kobject memory leak

commit 450ff8348808a89cc27436771aa05c2b90c0eef1 upstream.

If a call to kobject_init_and_add() fails we must call kobject_put()
otherwise we leak memory.

Calling kobject_put() when kobject_init_and_add() fails drops the
refcount back to 0 and calls the ktype release method (which in turn
calls the percpu destroy and kfree).

Add call to kobject_put() in the error path of call to
kobject_init_and_add().

Cc: stable@vger.kernel.org # v4.4+
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Tobin C. Harding <tobin@kernel.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Btrfs: fix race between ranged fsync and writeback of adjacent ranges

commit 0c713cbab6200b0ab6473b50435e450a6e1de85d upstream.

When we do a full fsync (the bit BTRFS_INODE_NEEDS_FULL_SYNC is set in the
inode) that happens to be ranged, which happens during a msync() or writes
for files opened with O_SYNC for example, we can end up with a corrupt log,
due to different file extent items representing ranges that overlap with
each other, or hit some assertion failures.

When doing a ranged fsync we only flush delalloc and wait for ordered
exents within that range. If while we are logging items from our inode
ordered extents for adjacent ranges complete, we end up in a race that can
make us insert the file extent items that overlap with others we logged
previously and the assertion failures.

For example, if tree-log.c:copy_items() receives a leaf that has the
following file extents items, all with a length of 4K and therefore there
is an implicit hole in the range 68K to 72K - 1:

  (257 EXTENT_ITEM 64K), (257 EXTENT_ITEM 72K), (257 EXTENT_ITEM 76K), ...

It copies them to the log tree. However due to the need to detect implicit
holes, it may release the path, in order to look at the previous leaf to
detect an implicit hole, and then later it will search again in the tree
for the first file extent item key, with the goal of locking again the
leaf (which might have changed due to concurrent changes to other inodes).

However when it locks again the leaf containing the first key, the key
corresponding to the extent at offset 72K may not be there anymore since
there is an ordered extent for that range that is finishing (that is,
somewhere in the middle of btrfs_finish_ordered_io()), and it just
removed the file extent item but has not yet replaced it with a new file
extent item, so the part of copy_items() that does hole detection will
decide that there is a hole in the range starting from 68K to 76K - 1,
and therefore insert a file extent item to represent that hole, having
a key offset of 68K. After that we now have a log tree with 2 different
extent items that have overlapping ranges:

1) The file extent item copied before copy_items() released the path,
    which has a key offset of 72K and a length of 4K, representing the
    file range 72K to 76K - 1.

2) And a file extent item representing a hole that has a key offset of
    68K and a length of 8K, representing the range 68K to 76K - 1. This
    item was inserted after releasing the path, and overlaps with the
    extent item inserted before.

The overlapping extent items can cause all sorts of unpredictable and
incorrect behaviour, either when replayed or if a fast (non full) fsync
happens later, which can trigger a BUG_ON() when calling
btrfs_set_item_key_safe() through __btrfs_drop_extents(), producing a
trace like the following:

  [61666.783269] ------------[ cut here ]------------
  [61666.783943] kernel BUG at fs/btrfs/ctree.c:3182!
  [61666.784644] invalid opcode: 0000 [#1] PREEMPT SMP
  (...)
  [61666.786253] task: ffff880117b88c40 task.stack: ffffc90008168000
  [61666.786253] RIP: 0010:btrfs_set_item_key_safe+0x7c/0xd2 [btrfs]
  [61666.786253] RSP: 0018:ffffc9000816b958 EFLAGS: 00010246
  [61666.786253] RAX: 0000000000000000 RBX: 000000000000000f RCX: 0000000000030000
  [61666.786253] RDX: 0000000000000000 RSI: ffffc9000816ba4f RDI: ffffc9000816b937
  [61666.786253] RBP: ffffc9000816b998 R08: ffff88011dae2428 R09: 0000000000001000
  [61666.786253] R10: 0000160000000000 R11: 6db6db6db6db6db7 R12: ffff88011dae2418
  [61666.786253] R13: ffffc9000816ba4f R14: ffff8801e10c4118 R15: ffff8801e715c000
  [61666.786253] FS:  00007f6060a18700(0000) GS:ffff88023f5c0000(0000) knlGS:0000000000000000
  [61666.786253] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  [61666.786253] CR2: 00007f6060a28000 CR3: 0000000213e69000 CR4: 00000000000006e0
  [61666.786253] Call Trace:
  [61666.786253]  __btrfs_drop_extents+0x5e3/0xaad [btrfs]
  [61666.786253]  ? time_hardirqs_on+0x9/0x14
  [61666.786253]  btrfs_log_changed_extents+0x294/0x4e0 [btrfs]
  [61666.786253]  ? release_extent_buffer+0x38/0xb4 [btrfs]
  [61666.786253]  btrfs_log_inode+0xb6e/0xcdc [btrfs]
  [61666.786253]  ? lock_acquire+0x131/0x1c5
  [61666.786253]  ? btrfs_log_inode_parent+0xee/0x659 [btrfs]
  [61666.786253]  ? arch_local_irq_save+0x9/0xc
  [61666.786253]  ? btrfs_log_inode_parent+0x1f5/0x659 [btrfs]
  [61666.786253]  btrfs_log_inode_parent+0x223/0x659 [btrfs]
  [61666.786253]  ? arch_local_irq_save+0x9/0xc
  [61666.786253]  ? lockref_get_not_zero+0x2c/0x34
  [61666.786253]  ? rcu_read_unlock+0x3e/0x5d
  [61666.786253]  btrfs_log_dentry_safe+0x60/0x7b [btrfs]
  [61666.786253]  btrfs_sync_file+0x317/0x42c [btrfs]
  [61666.786253]  vfs_fsync_range+0x8c/0x9e
  [61666.786253]  SyS_msync+0x13c/0x1c9
  [61666.786253]  entry_SYSCALL_64_fastpath+0x18/0xad

A sample of a corrupt log tree leaf with overlapping extents I got from
running btrfs/072:

      item 14 key (295 108 200704) itemoff 2599 itemsize 53
              extent data disk bytenr 0 nr 0
              extent data offset 0 nr 458752 ram 458752
      item 15 key (295 108 659456) itemoff 2546 itemsize 53
              extent data disk bytenr 4343541760 nr 770048
              extent data offset 606208 nr 163840 ram 770048
      item 16 key (295 108 663552) itemoff 2493 itemsize 53
              extent data disk bytenr 4343541760 nr 770048
              extent data offset 610304 nr 155648 ram 770048
      item 17 key (295 108 819200) itemoff 2440 itemsize 53
              extent data disk bytenr 4334788608 nr 4096
              extent data offset 0 nr 4096 ram 4096

The file extent item at offset 659456 (item 15) ends at offset 823296
(659456 + 163840) while the next file extent item (item 16) starts at
offset 663552.

Another different problem that the race can trigger is a failure in the
assertions at tree-log.c:copy_items(), which expect that the first file
extent item key we found before releasing the path exists after we have
released path and that the last key we found before releasing the path
also exists after releasing the path:

  $ cat -n fs/btrfs/tree-log.c
  4080          if (need_find_last_extent) {
  4081                  /* btrfs_prev_leaf could return 1 without releasing the path */
  4082                  btrfs_release_path(src_path);
  4083                  ret = btrfs_search_slot(NULL, inode->root, &first_key,
  4084                                  src_path, 0, 0);
  4085                  if (ret < 0)
  4086                          return ret;
  4087                  ASSERT(ret == 0);
  (...)
  4103                  if (i >= btrfs_header_nritems(src_path->nodes[0])) {
  4104                          ret = btrfs_next_leaf(inode->root, src_path);
  4105                          if (ret < 0)
  4106                                  return ret;
  4107                          ASSERT(ret == 0);
  4108                          src = src_path->nodes[0];
  4109                          i = 0;
  4110                          need_find_last_extent = true;
  4111                  }
  (...)

The second assertion implicitly expects that the last key before the path
release still exists, because the surrounding while loop only stops after
we have found that key. When this assertion fails it produces a stack like
this:

  [139590.037075] assertion failed: ret == 0, file: fs/btrfs/tree-log.c, line: 4107
  [139590.037406] ------------[ cut here ]------------
  [139590.037707] kernel BUG at fs/btrfs/ctree.h:3546!
  [139590.038034] invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC PTI
  [139590.038340] CPU: 1 PID: 31841 Comm: fsstress Tainted: G        W         5.0.0-btrfs-next-46 #1
  (...)
  [139590.039354] RIP: 0010:assfail.constprop.24+0x18/0x1a [btrfs]
  (...)
  [139590.040397] RSP: 0018:ffffa27f48f2b9b0 EFLAGS: 00010282
  [139590.040730] RAX: 0000000000000041 RBX: ffff897c635d92c8 RCX: 0000000000000000
  [139590.041105] RDX: 0000000000000000 RSI: ffff897d36a96868 RDI: ffff897d36a96868
  [139590.041470] RBP: ffff897d1b9a0708 R08: 0000000000000000 R09: 0000000000000000
  [139590.041815] R10: 0000000000000008 R11: 0000000000000000 R12: 0000000000000013
  [139590.042159] R13: 0000000000000227 R14: ffff897cffcbba88 R15: 0000000000000001
  [139590.042501] FS:  00007f2efc8dee80(0000) GS:ffff897d36a80000(0000) knlGS:0000000000000000
  [139590.042847] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  [139590.043199] CR2: 00007f8c064935e0 CR3: 0000000232252002 CR4: 00000000003606e0
  [139590.043547] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
  [139590.043899] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
  [139590.044250] Call Trace:
  [139590.044631]  copy_items+0xa3f/0x1000 [btrfs]
  [139590.045009]  ? generic_bin_search.constprop.32+0x61/0x200 [btrfs]
  [139590.045396]  btrfs_log_inode+0x7b3/0xd70 [btrfs]
  [139590.045773]  btrfs_log_inode_parent+0x2b3/0xce0 [btrfs]
  [139590.046143]  ? do_raw_spin_unlock+0x49/0xc0
  [139590.046510]  btrfs_log_dentry_safe+0x4a/0x70 [btrfs]
  [139590.046872]  btrfs_sync_file+0x3b6/0x440 [btrfs]
  [139590.047243]  btrfs_file_write_iter+0x45b/0x5c0 [btrfs]
  [139590.047592]  __vfs_write+0x129/0x1c0
  [139590.047932]  vfs_write+0xc2/0x1b0
  [139590.048270]  ksys_write+0x55/0xc0
  [139590.048608]  do_syscall_64+0x60/0x1b0
  [139590.048946]  entry_SYSCALL_64_after_hwframe+0x49/0xbe
  [139590.049287] RIP: 0033:0x7f2efc4be190
  (...)
  [139590.050342] RSP: 002b:00007ffe743243a8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
  [139590.050701] RAX: ffffffffffffffda RBX: 0000000000008d58 RCX: 00007f2efc4be190
  [139590.051067] RDX: 0000000000008d58 RSI: 00005567eca0f370 RDI: 0000000000000003
  [139590.051459] RBP: 0000000000000024 R08: 0000000000000003 R09: 0000000000008d60
  [139590.051863] R10: 0000000000000078 R11: 0000000000000246 R12: 0000000000000003
  [139590.052252] R13: 00000000003d3507 R14: 00005567eca0f370 R15: 0000000000000000
  (...)
  [139590.055128] ---[ end trace 193f35d0215cdeeb ]---

So fix this race between a full ranged fsync and writeback of adjacent
ranges by flushing all delalloc and waiting for all ordered extents to
complete before logging the inode. This is the simplest way to solve the
problem because currently the full fsync path does not deal with ranges
at all (it assumes a full range from 0 to LLONG_MAX) and it always needs
to look at adjacent ranges for hole detection. For use cases of ranged
fsyncs this can make a few fsyncs slower but on the other hand it can
make some following fsyncs to other ranges do less work or no need to do
anything at all. A full fsync is rare anyway and happens only once after
loading/creating an inode and once after less common operations such as a
shrinking truncate.

This is an issue that exists for a long time, and was often triggered by
generic/127, because it does mmap'ed writes and msync (which triggers a
ranged fsync). Adding support for the tree checker to detect overlapping
extents (next patch in the series) and trigger a WARN() when such cases
are found, and then calling btrfs_check_leaf_full() at the end of
btrfs_insert_file_extent() made the issue much easier to detect. Running
btrfs/072 with that change to the tree checker and making fsstress open
files always with O_SYNC made it much easier to trigger the issue (as
triggering it with generic/127 is very rare).

CC: stable@vger.kernel.org # 3.16+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Btrfs: avoid fallback to transaction commit during fsync of files with holes

commit ebb929060aeb162417b4c1307e63daee47b208d9 upstream.

When we are doing a full fsync (bit BTRFS_INODE_NEEDS_FULL_SYNC set) of a
file that has holes and has file extent items spanning two or more leafs,
we can end up falling to back to a full transaction commit due to a logic
bug that leads to failure to insert a duplicate file extent item that is
meant to represent a hole between the last file extent item of a leaf and
the first file extent item in the next leaf. The failure (EEXIST error)
leads to a transaction commit (as most errors when logging an inode do).

For example, we have the two following leafs:

Leaf N:

  -----------------------------------------------
  | ..., ..., ..., (257, FILE_EXTENT_ITEM, 64K) |
  -----------------------------------------------
  The file extent item at the end of leaf N has a length of 4Kb,
  representing the file range from 64K to 68K - 1.

Leaf N + 1:

  -----------------------------------------------
  | (257, FILE_EXTENT_ITEM, 72K), ..., ..., ... |
  -----------------------------------------------
  The file extent item at the first slot of leaf N + 1 has a length of
  4Kb too, representing the file range from 72K to 76K - 1.

During the full fsync path, when we are at tree-log.c:copy_items() with
leaf N as a parameter, after processing the last file extent item, that
represents the extent at offset 64K, we take a look at the first file
extent item at the next leaf (leaf N + 1), and notice there's a 4K hole
between the two extents, and therefore we insert a file extent item
representing that hole, starting at file offset 68K and ending at offset
72K - 1. However we don't update the value of *last_extent, which is used
to represent the end offset (plus 1, non-inclusive end) of the last file
extent item inserted in the log, so it stays with a value of 68K and not
with a value of 72K.

Then, when copy_items() is called for leaf N + 1, because the value of
*last_extent is smaller then the offset of the first extent item in the
leaf (68K < 72K), we look at the last file extent item in the previous
leaf (leaf N) and see it there's a 4K gap between it and our first file
extent item (again, 68K < 72K), so we decide to insert a file extent item
representing the hole, starting at file offset 68K and ending at offset
72K - 1, this insertion will fail with -EEXIST being returned from
btrfs_insert_file_extent() because we already inserted a file extent item
representing a hole for this offset (68K) in the previous call to
copy_items(), when processing leaf N.

The -EEXIST error gets propagated to the fsync callback, btrfs_sync_file(),
which falls back to a full transaction commit.

Fix this by adjusting *last_extent after inserting a hole when we had to
look at the next leaf.

Fixes: 4ee3fad34a9c ("Btrfs: fix fsync after hole punching when using no-holes feature")
Cc: stable@vger.kernel.org # 4.14+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Btrfs: do not abort transaction at btrfs_update_root() after failure to COW path

commit 72bd2323ec87722c115a5906bc6a1b31d11e8f54 upstream.

Currently when we fail to COW a path at btrfs_update_root() we end up
always aborting the transaction. However all the current callers of
btrfs_update_root() are able to deal with errors returned from it, many do
end up aborting the transaction themselves (directly or not, such as the
transaction commit path), other BUG_ON() or just gracefully cancel whatever
they were doing.

When syncing the fsync log, we call btrfs_update_root() through
tree-log.c:update_log_root(), and if it returns an -ENOSPC error, the log
sync code does not abort the transaction, instead it gracefully handles
the error and returns -EAGAIN to the fsync handler, so that it falls back
to a transaction commit. Any other error different from -ENOSPC, makes the
log sync code abort the transaction.

So remove the transaction abort from btrfs_update_log() when we fail to
COW a path to update the root item, so that if an -ENOSPC failure happens
we avoid aborting the current transaction and have a chance of the fsync
succeeding after falling back to a transaction commit.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=203413
Fixes: 79787eaab46121 ("btrfs: replace many BUG_ONs with proper error handling")
Cc: stable@vger.kernel.org # 4.4+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: Check the compression level before getting a workspace

commit 2b90883c561ddcc641741c2e4df1f702a4f2acb8 upstream.

When a file's compression property is set as zlib or zstd but leave
the compression mount option not be set, that means btrfs will try
to compress the file with default compression level. But in
btrfs_compress_pages(), it calls get_workspace() with level = 0.
This will return a workspace with a wrong compression level.
For zlib, the compression level in the workspace will be 0
(that means "store only"). And for zstd, the compression in the
workspace will be 1, not the default level 3.

How to reproduce:
  mkfs -t btrfs /dev/sdb
  mount /dev/sdb /mnt/
  mkdir /mnt/zlib
  btrfs property set /mnt/zlib/ compression zlib
  dd if=/dev/zero of=/mnt/zlib/compression-friendly-file-10M bs=1M count=10
  sync
  btrfs-debugfs -f /mnt/zlib/compression-friendly-file-10M

btrfs-debugfs output:
* before:
  ...
  (258 9961472): ram 524288 disk 1106247680 disk_size 524288
  file: ... extents 20 disk size 10485760 logical size 10485760 ratio 1.00

* after:
...
(258 10354688): ram 131072 disk 14217216 disk_size 4096
file: ... extents 80 disk size 327680 logical size 10485760 ratio 32.00

The steps for zstd are similar, but need to put a debugging message to
show the level of the return workspace in zstd_get_workspace().

This commit adds a check of the compression level before getting a
workspace by set_level().

CC: stable@vger.kernel.org # 5.1+
Signed-off-by: Johnny Chang <johnnyc@synology.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: don't double unlock on error in btrfs_punch_hole

commit 8fca955057b9c58467d1b231e43f19c4cf26ae8c upstream.

If we have an error writing out a delalloc range in
btrfs_punch_hole_lock_range we'll unlock the inode and then goto
out_only_mutex, where we will again unlock the inode. This is bad,
don't do this.

Fixes: f27451f22996 ("Btrfs: add support for fallocate's zero range operation")
CC: stable@vger.kernel.org # 4.19+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

gfs2: Fix sign extension bug in gfs2_update_stats

commit 5a5ec83d6ac974b12085cd99b196795f14079037 upstream.

Commit 4d207133e9c3 changed the types of the statistic values in struct
gfs2_lkstats from s64 to u64. Because of that, what should be a signed
value in gfs2_update_stats turned into an unsigned value. When shifted
right, we end up with a large positive value instead of a small negative
value, which results in an incorrect variance estimate.

Fixes: 4d207133e9c3 ("gfs2: Make statistics unsigned, suitable for use with do_div()")
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Cc: stable@vger.kernel.org # v4.4+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64/iommu: handle non-remapped addresses in ->mmap and ->get_sgtable

commit a98d9ae937d256ed679a935fc82d9deaa710d98e upstream.

DMA allocations that can't sleep may return non-remapped addresses, but
we do not properly handle them in the mmap and get_sgtable methods.
Resolve non-vmalloc addresses using virt_to_page to handle this corner
case.

Cc: <stable@vger.kernel.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: Kconfig: Make ARM64_PSEUDO_NMI depend on BROKEN for now

commit 96a13f57b946be7a6c10405e4bd780c0b6b6fe63 upstream.

Although we merged support for pseudo-nmi using interrupt priority
masking in 5.1, we've since uncovered a number of non-trivial issues
with the implementation. Although there are patches pending to address
these problems, we're facing issues that prevent us from merging them at
this current time:

https://lkml.kernel.org/r/1556553607-46531-1-git-send-email-julien.thierry@arm.com

For now, simply mark this optional feature as BROKEN in the hope that we
can fix things properly in the near future.

Cc: <stable@vger.kernel.org> # 5.1
Cc: Julien Thierry <julien.thierry@arm.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64/kernel: kaslr: reduce module randomization range to 2 GB

commit b2eed9b58811283d00fa861944cb75797d4e52a7 upstream.

The following commit

7290d5809571 ("module: use relative references for __ksymtab entries")

updated the ksymtab handling of some KASLR capable architectures
so that ksymtab entries are emitted as pairs of 32-bit relative
references. This reduces the size of the entries, but more
importantly, it gets rid of statically assigned absolute
addresses, which require fixing up at boot time if the kernel
is self relocating (which takes a 24 byte RELA entry for each
member of the ksymtab struct).

Since ksymtab entries are always part of the same module as the
symbol they export, it was assumed at the time that a 32-bit
relative reference is always sufficient to capture the offset
between a ksymtab entry and its target symbol.

Unfortunately, this is not always true: in the case of per-CPU
variables, a per-CPU variable's base address (which usually differs
from the actual address of any of its per-CPU copies) is allocated
in the vicinity of the ..data.percpu section in the core kernel
(i.e., in the per-CPU reserved region which follows the section
containing the core kernel's statically allocated per-CPU variables).

Since we randomize the module space over a 4 GB window covering
the core kernel (based on the -/+ 4 GB range of an ADRP/ADD pair),
we may end up putting the core kernel out of the -/+ 2 GB range of
32-bit relative references of module ksymtab entries that refer to
per-CPU variables.

So reduce the module randomization range a bit further. We lose
1 bit of randomization this way, but this is something we can
tolerate.

Cc: <stable@vger.kernel.org> # v4.19+
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

libnvdimm/pmem: Bypass CONFIG_HARDENED_USERCOPY overhead

commit 52f476a323f9efc959be1c890d0cdcf12e1582e0 upstream.

Jeff discovered that performance improves from ~375K iops to ~519K iops
on a simple psync-write fio workload when moving the location of 'struct
page' from the default PMEM location to DRAM. This result is surprising
because the expectation is that 'struct page' for dax is only needed for
third party references to dax mappings. For example, a dax-mapped buffer
passed to another system call for direct-I/O requires 'struct page' for
sending the request down the driver stack and pinning the page. There is
no usage of 'struct page' for first party access to a file via
read(2)/write(2) and friends.

However, this "no page needed" expectation is violated by
CONFIG_HARDENED_USERCOPY and the check_copy_size() performed in
copy_from_iter_full_nocache() and copy_to_iter_mcsafe(). The
check_heap_object() helper routine assumes the buffer is backed by a
slab allocator (DRAM) page and applies some checks. Those checks are
invalid, dax pages do not originate from the slab, and redundant,
dax_iomap_actor() has already validated that the I/O is within bounds.
Specifically that routine validates that the logical file offset is
within bounds of the file, then it does a sector-to-pfn translation
which validates that the physical mapping is within bounds of the block
device.

Bypass additional hardened usercopy overhead and call the 'no check'
versions of the copy_{to,from}_iter operations directly.

Fixes: 0aed55af8834 ("x86, uaccess: introduce copy_from_iter_flushcache...")
Cc: <stable@vger.kernel.org>
Cc: Jeff Moyer <jmoyer@redhat.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Matthew Wilcox <willy@infradead.org>
Reported-and-tested-by: Jeff Smits <jeff.smits@intel.com>
Acked-by: Kees Cook <keescook@chromium.org>
Acked-by: Jan Kara <jack@suse.cz>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: nVMX: Fix using __this_cpu_read() in preemptible context

commit 541e886f7972cc647804dbb4909189e67987a945 upstream.

BUG: using __this_cpu_read() in preemptible [00000000] code: qemu-system-x86/4590
  caller is nested_vmx_enter_non_root_mode+0xebd/0x1790 [kvm_intel]
  CPU: 4 PID: 4590 Comm: qemu-system-x86 Tainted: G           OE     5.1.0-rc4+ #1
  Call Trace:
   dump_stack+0x67/0x95
   __this_cpu_preempt_check+0xd2/0xe0
   nested_vmx_enter_non_root_mode+0xebd/0x1790 [kvm_intel]
   nested_vmx_run+0xda/0x2b0 [kvm_intel]
   handle_vmlaunch+0x13/0x20 [kvm_intel]
   vmx_handle_exit+0xbd/0x660 [kvm_intel]
   kvm_arch_vcpu_ioctl_run+0xa2c/0x1e50 [kvm]
   kvm_vcpu_ioctl+0x3ad/0x6d0 [kvm]
   do_vfs_ioctl+0xa5/0x6e0
   ksys_ioctl+0x6d/0x80
   __x64_sys_ioctl+0x1a/0x20
   do_syscall_64+0x6f/0x6c0
   entry_SYSCALL_64_after_hwframe+0x49/0xbe

Accessing per-cpu variable should disable preemption, this patch extends the
preemption disable region for __this_cpu_read().

Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Fixes: 52017608da33 ("KVM: nVMX: add option to perform early consistency checks via H/W")
Cc: stable@vger.kernel.org
Reviewed-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kvm: svm/avic: fix off-by-one in checking host APIC ID

commit c9bcd3e3335d0a29d89fabd2c385e1b989e6f1b0 upstream.

Current logic does not allow VCPU to be loaded onto CPU with
APIC ID 255. This should be allowed since the host physical APIC ID
field in the AVIC Physical APIC table entry is an 8-bit value,
and APIC ID 255 is valid in system with x2APIC enabled.
Instead, do not allow VCPU load if the host APIC ID cannot be
represented by an 8-bit value.

Also, use the more appropriate AVIC_PHYSICAL_ID_ENTRY_HOST_PHYSICAL_ID_MASK
instead of AVIC_MAX_PHYSICAL_ID_COUNT.

Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kvm: Check irqchip mode before assign irqfd

commit 654f1f13ea56b92bacade8ce2725aea0457f91c0 upstream.

When assigning kvm irqfd we didn't check the irqchip mode but we allow
KVM_IRQFD to succeed with all the irqchip modes.  However it does not
make much sense to create irqfd even without the kernel chips.  Let's
provide a arch-dependent helper to check whether a specific irqfd is
allowed by the arch.  At least for x86, it should make sense to check:

- when irqchip mode is NONE, all irqfds should be disallowed, and,

- when irqchip mode is SPLIT, irqfds that are with resamplefd should
  be disallowed.

For either of the case, previously we'll silently ignore the irq or
the irq ack event if the irqchip mode is incorrect.  However that can
cause misterious guest behaviors and it can be hard to triage.  Let's
fail KVM_IRQFD even earlier to detect these incorrect configurations.

CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Radim Krčmář <rkrcmar@redhat.com>
CC: Alex Williamson <alex.williamson@redhat.com>
CC: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dax: Arrange for dax_supported check to span multiple devices

commit 7bf7eac8d648057519adb6fce1e31458c902212c upstream.

Pankaj reports that starting with commit ad428cdb525a "dax: Check the
end of the block-device capacity with dax_direct_access()" device-mapper
no longer allows dax operation. This results from the stricter checks in
__bdev_dax_supported() that validate that the start and end of a
block-device map to the same 'pagemap' instance.

Teach the dax-core and device-mapper to validate the 'pagemap' on a
per-target basis. This is accomplished by refactoring the
bdev_dax_supported() internals into generic_fsdax_supported() which
takes a sector range to validate. Consequently generic_fsdax_supported()
is suitable to be used in a device-mapper ->iterate_devices() callback.
A new ->dax_supported() operation is added to allow composite devices to
split and route upper-level bdev_dax_supported() requests.

Fixes: ad428cdb525a ("dax: Check the end of the block-device...")
Cc: <stable@vger.kernel.org>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Keith Busch <keith.busch@intel.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reported-by: Pankaj Gupta <pagupta@redhat.com>
Reviewed-by: Pankaj Gupta <pagupta@redhat.com>
Tested-by: Pankaj Gupta <pagupta@redhat.com>
Tested-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tracing: Add a check_val() check before updating cond_snapshot() track_val

commit 9b2ca371b1505a547217b244f903ad3fb86fa5b4 upstream.

Without this check a snapshot is taken whenever a bucket's max is hit,
rather than only when the global max is hit, as it should be.

Before:

  In this example, we do a first run of the workload (cyclictest),
  examine the output, note the max ('triggering value') (347), then do
  a second run and note the max again.

  In this case, the max in the second run (39) is below the max in the
  first run, but since we haven't cleared the histogram, the first max
  is still in the histogram and is higher than any other max, so it
  should still be the max for the snapshot.  It isn't however - the
  value should still be 347 after the second run.

  # echo 'hist:keys=pid:ts0=common_timestamp.usecs if comm=="cyclictest"' >> /sys/kernel/debug/tracing/events/sched/sched_waking/trigger
  # echo 'hist:keys=next_pid:wakeup_lat=common_timestamp.usecs-$ts0:onmax($wakeup_lat).save(next_prio,next_comm,prev_pid,prev_prio,prev_comm):onmax($wakeup_lat).snapshot() if next_comm=="cyclictest"' >> /sys/kernel/debug/tracing/events/sched/sched_switch/trigger

  # cyclictest -p 80 -n -s -t 2 -D 2

  # cat /sys/kernel/debug/tracing/events/sched/sched_switch/hist

  { next_pid:       2143 } hitcount:        199
    max:         44  next_prio:        120  next_comm: cyclictest
    prev_pid:          0  prev_prio:        120  prev_comm: swapper/4

  { next_pid:       2145 } hitcount:       1325
    max:         38  next_prio:         19  next_comm: cyclictest
    prev_pid:          0  prev_prio:        120  prev_comm: swapper/2

  { next_pid:       2144 } hitcount:       1982
    max:        347  next_prio:         19  next_comm: cyclictest
    prev_pid:          0  prev_prio:        120  prev_comm: swapper/6

  Snapshot taken (see tracing/snapshot).  Details:
      triggering value { onmax($wakeup_lat) }:        347
      triggered by event with key: { next_pid:       2144 }

  # cyclictest -p 80 -n -s -t 2 -D 2

  # cat /sys/kernel/debug/tracing/events/sched/sched_switch/hist

  { next_pid:       2143 } hitcount:        199
    max:         44  next_prio:        120  next_comm: cyclictest
    prev_pid:          0  prev_prio:        120  prev_comm: swapper/4

  { next_pid:       2148 } hitcount:        199
    max:         16  next_prio:        120  next_comm: cyclictest
    prev_pid:          0  prev_prio:        120  prev_comm: swapper/1

  { next_pid:       2145 } hitcount:       1325
    max:         38  next_prio:         19  next_comm: cyclictest
    prev_pid:          0  prev_prio:        120  prev_comm: swapper/2

  { next_pid:       2150 } hitcount:       1326
    max:         39  next_prio:         19  next_comm: cyclictest
    prev_pid:          0  prev_prio:        120  prev_comm: swapper/4

  { next_pid:       2144 } hitcount:       1982
    max:        347  next_prio:         19  next_comm: cyclictest
    prev_pid:          0  prev_prio:        120  prev_comm: swapper/6

  { next_pid:       2149 } hitcount:       1983
    max:        130  next_prio:         19  next_comm: cyclictest
    prev_pid:          0  prev_prio:        120  prev_comm: swapper/0

  Snapshot taken (see tracing/snapshot).  Details:
    triggering value { onmax($wakeup_lat) }:    39
    triggered by event with key: { next_pid:       2150 }

After:

  In this example, we do a first run of the workload (cyclictest),
  examine the output, note the max ('triggering value') (375), then do
  a second run and note the max again.

  In this case, the max in the second run is still 375, the highest in
  any bucket, as it should be.

  # cyclictest -p 80 -n -s -t 2 -D 2

  # cat /sys/kernel/debug/tracing/events/sched/sched_switch/hist

  { next_pid:       2072 } hitcount:        200
    max:         28  next_prio:        120  next_comm: cyclictest
    prev_pid:          0  prev_prio:        120  prev_comm: swapper/5

  { next_pid:       2074 } hitcount:       1323
    max:        375  next_prio:         19  next_comm: cyclictest
    prev_pid:          0  prev_prio:        120  prev_comm: swapper/2

  { next_pid:       2073 } hitcount:       1980
    max:        153  next_prio:         19  next_comm: cyclictest
    prev_pid:          0  prev_prio:        120  prev_comm: swapper/6

  Snapshot taken (see tracing/snapshot).  Details:
    triggering value { onmax($wakeup_lat) }:        375
    triggered by event with key: { next_pid:       2074 }

  # cyclictest -p 80 -n -s -t 2 -D 2

  # cat /sys/kernel/debug/tracing/events/sched/sched_switch/hist

  { next_pid:       2101 } hitcount:        199
    max:         49  next_prio:        120  next_comm: cyclictest
    prev_pid:          0  prev_prio:        120  prev_comm: swapper/6

  { next_pid:       2072 } hitcount:        200
    max:         28  next_prio:        120  next_comm: cyclictest
    prev_pid:          0  prev_prio:        120  prev_comm: swapper/5

  { next_pid:       2074 } hitcount:       1323
    max:        375  next_prio:         19  next_comm: cyclictest
    prev_pid:          0  prev_prio:        120  prev_comm: swapper/2

  { next_pid:       2103 } hitcount:       1325
    max:         74  next_prio:         19  next_comm: cyclictest
    prev_pid:          0  prev_prio:        120  prev_comm: swapper/4

  { next_pid:       2073 } hitcount:       1980
    max:        153  next_prio:         19  next_comm: cyclictest
    prev_pid:          0  prev_prio:        120  prev_comm: swapper/6

  { next_pid:       2102 } hitcount:       1981
    max:         84  next_prio:         19  next_comm: cyclictest
    prev_pid:         12  prev_prio:        120  prev_comm: kworker/0:1

  Snapshot taken (see tracing/snapshot).  Details:
    triggering value { onmax($wakeup_lat) }:        375
    triggered by event with key: { next_pid:       2074 }

Link: http://lkml.kernel.org/r/95958351329f129c07504b4d1769c47a97b70d65.1555597045.git.tom.zanussi@linux.intel.com
Cc: stable@vger.kernel.org
Fixes: a3785b7eca8fd ("tracing: Add hist trigger snapshot() action")
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: sdhci-iproc: Set NO_HISPD bit to fix HS50 data hold time problem

commit ec0970e0a1b2c807c908d459641a9f9a1be3e130 upstream.

The iproc host eMMC/SD controller hold time does not meet the
specification in the HS50 mode. This problem can be mitigated
by disabling the HISPD bit; thus forcing the controller output
data to be driven on the falling clock edges rather than the
rising clock edges.

Stable tag (v4.12+) chosen to assist stable kernel maintainers so that
the change does not produce merge conflicts backporting to older kernel
versions. In reality, the timing bug existed since the driver was first
introduced but there is no need for this driver to be supported in kernel
versions that old.

Cc: stable@vger.kernel.org # v4.12+
Signed-off-by: Trac Hoang <trac.hoang@broadcom.com>
Signed-off-by: Scott Branden <scott.branden@broadcom.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: sdhci-iproc: cygnus: Set NO_HISPD bit to fix HS50 data hold time problem

commit b7dfa695afc40d5396ed84b9f25aa3754de23e39 upstream.

The iproc host eMMC/SD controller hold time does not meet the
specification in the HS50 mode. This problem can be mitigated
by disabling the HISPD bit; thus forcing the controller output
data to be driven on the falling clock edges rather than the
rising clock edges.

This change applies only to the Cygnus platform.

Stable tag (v4.12+) chosen to assist stable kernel maintainers so that
the change does not produce merge conflicts backporting to older kernel
versions. In reality, the timing bug existed since the driver was first
introduced but there is no need for this driver to be supported in kernel
versions that old.

Cc: stable@vger.kernel.org # v4.12+
Signed-off-by: Trac Hoang <trac.hoang@broadcom.com>
Signed-off-by: Scott Branden <scott.branden@broadcom.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto: vmx - CTR: always increment IV as quadword

commit 009b30ac7444c17fae34c4f435ebce8e8e2b3250 upstream.

The kernel self-tests picked up an issue with CTR mode:
alg: skcipher: p8_aes_ctr encryption test failed (wrong result) on test vector 3, cfg="uneven misaligned splits, may sleep"

Test vector 3 has an IV of FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFD, so
after 3 increments it should wrap around to 0.

In the aesp8-ppc code from OpenSSL, there are two paths that
increment IVs: the bulk (8 at a time) path, and the individual
path which is used when there are fewer than 8 AES blocks to
process.

In the bulk path, the IV is incremented with vadduqm: "Vector
Add Unsigned Quadword Modulo", which does 128-bit addition.

In the individual path, however, the IV is incremented with
vadduwm: "Vector Add Unsigned Word Modulo", which instead
does 4 32-bit additions. Thus the IV would instead become
FFFFFFFFFFFFFFFFFFFFFFFF00000000, throwing off the result.

Use vadduqm.

This was probably a typo originally, what with q and w being
adjacent. It is a pretty narrow edge case: I am really
impressed by the quality of the kernel self-tests!

Fixes: 5c380d623ed3 ("crypto: vmx - Add support for VMS instructions by ASM")
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Axtens <dja@axtens.net>
Acked-by: Nayna Jain <nayna@linux.ibm.com>
Tested-by: Nayna Jain <nayna@linux.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto: hash - fix incorrect HASH_MAX_DESCSIZE

commit e1354400b25da645c4764ed6844d12f1582c3b66 upstream.

The "hmac(sha3-224-generic)" algorithm has a descsize of 368 bytes,
which is greater than HASH_MAX_DESCSIZE (360) which is only enough for
sha3-224-generic.  The check in shash_prepare_alg() doesn't catch this
because the HMAC template doesn't set descsize on the algorithms, but
rather sets it on each individual HMAC transform.

This causes a stack buffer overflow when SHASH_DESC_ON_STACK() is used
with hmac(sha3-224-generic).

Fix it by increasing HASH_MAX_DESCSIZE to the real maximum.  Also add a
sanity check to hmac_init().

This was detected by the improved crypto self-tests in v5.2, by loading
the tcrypt module with CONFIG_CRYPTO_MANAGER_EXTRA_TESTS=y enabled.  I
didn't notice this bug when I ran the self-tests by requesting the
algorithms via AF_ALG (i.e., not using tcrypt), probably because the
stack layout differs in the two cases and that made a difference here.

KASAN report:

    BUG: KASAN: stack-out-of-bounds in memcpy include/linux/string.h:359 [inline]
    BUG: KASAN: stack-out-of-bounds in shash_default_import+0x52/0x80 crypto/shash.c:223
    Write of size 360 at addr ffff8880651defc8 by task insmod/3689

    CPU: 2 PID: 3689 Comm: insmod Tainted: G            E     5.1.0-10741-g35c99ffa20edd #11
    Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014
    Call Trace:
     __dump_stack lib/dump_stack.c:77 [inline]
     dump_stack+0x86/0xc5 lib/dump_stack.c:113
     print_address_description+0x7f/0x260 mm/kasan/report.c:188
     __kasan_report+0x144/0x187 mm/kasan/report.c:317
     kasan_report+0x12/0x20 mm/kasan/common.c:614
     check_memory_region_inline mm/kasan/generic.c:185 [inline]
     check_memory_region+0x137/0x190 mm/kasan/generic.c:191
     memcpy+0x37/0x50 mm/kasan/common.c:125
     memcpy include/linux/string.h:359 [inline]
     shash_default_import+0x52/0x80 crypto/shash.c:223
     crypto_shash_import include/crypto/hash.h:880 [inline]
     hmac_import+0x184/0x240 crypto/hmac.c:102
     hmac_init+0x96/0xc0 crypto/hmac.c:107
     crypto_shash_init include/crypto/hash.h:902 [inline]
     shash_digest_unaligned+0x9f/0xf0 crypto/shash.c:194
     crypto_shash_digest+0xe9/0x1b0 crypto/shash.c:211
     generate_random_hash_testvec.constprop.11+0x1ec/0x5b0 crypto/testmgr.c:1331
     test_hash_vs_generic_impl+0x3f7/0x5c0 crypto/testmgr.c:1420
     __alg_test_hash+0x26d/0x340 crypto/testmgr.c:1502
     alg_test_hash+0x22e/0x330 crypto/testmgr.c:1552
     alg_test.part.7+0x132/0x610 crypto/testmgr.c:4931
     alg_test+0x1f/0x40 crypto/testmgr.c:4952

Fixes: b68a7ec1e9a3 ("crypto: hash - Remove VLA usage")
Reported-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Cc: <stable@vger.kernel.org> # v4.20+
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "scsi: sd: Keep disk read-only when re-reading partition"

commit 8acf608e602f6ec38b7cc37b04c80f1ce9a1a6cc upstream.

This reverts commit 20bd1d026aacc5399464f8328f305985c493cde3.

This patch introduced regressions for devices that come online in
read-only state and subsequently switch to read-write.

Given how the partition code is currently implemented it is not
possible to persist the read-only flag across a device revalidate
call. This may need to get addressed in the future since it is common
for user applications to proactively call BLKRRPART.

Reverting this commit will re-introduce a regression where a
device-initiated revalidate event will cause the admin state to be
forgotten. A separate patch will address this issue.

Fixes: 20bd1d026aac ("scsi: sd: Keep disk read-only when re-reading partition")
Cc: <stable@vger.kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sbitmap: fix improper use of smp_mb__before_atomic()

commit a0934fd2b1208458e55fc4b48f55889809fce666 upstream.

This barrier only applies to the read-modify-write operations; in
particular, it does not apply to the atomic_set() primitive.

Replace the barrier with an smp_mb().

Fixes: 6c0ca7ae292ad ("sbitmap: fix wakeup hang after sbq resize")
Cc: stable@vger.kernel.org
Reported-by: "Paul E. McKenney" <paulmck@linux.ibm.com>
Reported-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Andrea Parri <andrea.parri@amarulasolutions.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Omar Sandoval <osandov@fb.com>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: linux-block@vger.kernel.org
Cc: "Paul E. McKenney" <paulmck@linux.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bio: fix improper use of smp_mb__before_atomic()

commit f381c6a4bd0ae0fde2d6340f1b9bb0f58d915de6 upstream.

This barrier only applies to the read-modify-write operations; in
particular, it does not apply to the atomic_set() primitive.

Replace the barrier with an smp_mb().

Fixes: dac56212e8127 ("bio: skip atomic inc/dec of ->bi_cnt for most use cases")
Cc: stable@vger.kernel.org
Reported-by: "Paul E. McKenney" <paulmck@linux.ibm.com>
Reported-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Andrea Parri <andrea.parri@amarulasolutions.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: linux-block@vger.kernel.org
Cc: "Paul E. McKenney" <paulmck@linux.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/kvm/pmu: Set AMD's virt PMU version to 1

commit a80c4ec10ed9632c44c829452dc40a0443ff4e85 upstream.

After commit:

  672ff6cff80c ("KVM: x86: Raise #GP when guest vCPU do not support PMU")

my AMD guests started #GPing like this:

  general protection fault: 0000 [#1] PREEMPT SMP
  CPU: 1 PID: 4355 Comm: bash Not tainted 5.1.0-rc6+ #3
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014
  RIP: 0010:x86_perf_event_update+0x3b/0xa0

with Code: pointing to RDPMC. It is RDPMC because the guest has the
hardware watchdog CONFIG_HARDLOCKUP_DETECTOR_PERF enabled which uses
perf. Instrumenting kvm_pmu_rdpmc() some, showed that it fails due to:

  if (!pmu->version)
   return 1;

which the above commit added. Since AMD's PMU leaves the version at 0,
that causes the #GP injection into the guest.

Set pmu->version arbitrarily to 1 and move it above the non-applicable
struct kvm_pmu members.

Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Janakarajan Natarajan <Janakarajan.Natarajan@amd.com>
Cc: kvm@vger.kernel.org
Cc: Liran Alon <liran.alon@oracle.com>
Cc: Mihai Carabas <mihai.carabas@oracle.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: "Radim Krčmář" <rkrcmar@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: x86@kernel.org
Cc: stable@vger.kernel.org
Fixes: 672ff6cff80c ("KVM: x86: Raise #GP when guest vCPU do not support PMU")
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: x86: fix return value for reserved EFER

commit 66f61c92889ff3ca365161fb29dd36d6354682ba upstream.

Commit 11988499e62b ("KVM: x86: Skip EFER vs. guest CPUID checks for
host-initiated writes", 2019-04-02) introduced a "return false" in a
function returning int, and anyway set_efer has a "nonzero on error"
conventon so it should be returning 1.

Reported-by: Pavel Machek <pavel@denx.de>
Fixes: 11988499e62b ("KVM: x86: Skip EFER vs. guest CPUID checks for host-initiated writes")
Cc: Sean Christopherson <sean.j.christopherson@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: wait for outstanding dio during truncate in nojournal mode

commit 82a25b027ca48d7ef197295846b352345853dfa8 upstream.

We didn't wait for outstanding direct IO during truncate in nojournal
mode (as we skip orphan handling in that case). This can lead to fs
corruption or stale data exposure if truncate ends up freeing blocks
and these get reallocated before direct IO finishes. Fix the condition
determining whether the wait is necessary.

CC: stable@vger.kernel.org
Fixes: 1c9114f9c0f1 ("ext4: serialize unlocked dio reads with truncate")
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: do not delete unlinked inode from orphan list on failed truncate

commit ee0ed02ca93ef1ecf8963ad96638795d55af2c14 upstream.

It is possible that unlinked inode enters ext4_setattr() (e.g. if
somebody calls ftruncate(2) on unlinked but still open file). In such
case we should not delete the inode from the orphan list if truncate
fails. Note that this is mostly a theoretical concern as filesystem is
corrupted if we reach this path anyway but let's be consistent in our
orphan handling.

Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86: Hide the int3_emulate_call/jmp functions from UML

commit 693713cbdb3a4bda5a8a678c31f06560bbb14657 upstream.

User Mode Linux does not have access to the ip or sp fields of the pt_regs,
and accessing them causes UML to fail to build. Hide the int3_emulate_jmp()
and int3_emulate_call() instructions from UML, as it doesn't need them
anyway.

Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 5.1.5

fbdev: sm712fb: fix memory frequency by avoiding a switch/case fallthrough

commit 9dc20113988b9a75ea6b3abd68dc45e2d73ccdab upstream.

A fallthrough in switch/case was introduced in f627caf55b8e ("fbdev:
sm712fb: fix crashes and garbled display during DPMS modesetting"),
due to my copy-paste error, which would cause the memory clock frequency
for SM720 to be programmed to SM712.

Since it only reprograms the clock to a different frequency, it's only
a benign issue without visible side-effect, so it also evaded Sudip
Mukherjee's code review and regression tests. scripts/checkpatch.pl
also failed to discover the issue, possibly due to nested switch
statements.

This issue was found by Stephen Rothwell by building linux-next with
-Wimplicit-fallthrough.

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Fixes: f627caf55b8e ("fbdev: sm712fb: fix crashes and garbled display during DPMS modesetting")
Signed-off-by: Yifeng Li <tomli@tomli.me>
Cc: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Cc: "Gustavo A. R. Silva" <gustavo@embeddedor.com>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: dts: imx6q-logicpd: Reduce inrush current on start

commit dbb58e291cd47e594b64293bd91a4ce40626513c upstream.

The main 3.3V regulator sources a series of additional regulators.
This patch adds a small delay, so when the 3.3V regulator comes
on it delays a bit before the subsequent regulators can come on.
This reduces the inrush current a bit on the external DC power
supply to help prevent a situation where the sourcing power supply
cannot source enough current and overloads and the kit fails to
start.

Fixes: 1c207f911fe9 ("ARM: dts: imx: Add support for Logic PD i.MX6QD EVM")
Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: dts: imx6q-logicpd: Reduce inrush current on USBH1

commit 7aedca875074b33795bc77066b325898b1eb8032 upstream.

Some USB peripherals draw more power, and the sourcing regulator
take a little time to turn on. This patch fixes an issue where
some devices occasionally do not get detected, because the power
isn't quite ready when communication starts, so we add a bit
of a delay.

Fixes: 1c207f911fe9 ("ARM: dts: imx: Add support for Logic PD i.MX6QD EVM")
Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: reloc: Fix NULL pointer dereference due to expanded reloc_root lifespan

commit 10995c0491204c861948c9850939a7f4e90760a4 upstream.

Commit d2311e698578 ("btrfs: relocation: Delay reloc tree deletion after
merge_reloc_roots()") expands the life span of root->reloc_root.

This breaks certain checs of fs_info->reloc_ctl.  Before that commit, if
we have a root with valid reloc_root, then it's ensured to have
fs_info->reloc_ctl.

But now since reloc_root doesn't always mean a valid fs_info->reloc_ctl,
such check is unreliable and can cause the following NULL pointer
dereference:

  BUG: unable to handle kernel NULL pointer dereference at 00000000000005c1
  IP: btrfs_reloc_pre_snapshot+0x20/0x50 [btrfs]
  PGD 0 P4D 0
  Oops: 0000 [#1] SMP PTI
  CPU: 0 PID: 10379 Comm: snapperd Not tainted
  Call Trace:
   create_pending_snapshot+0xd7/0xfc0 [btrfs]
   create_pending_snapshots+0x8e/0xb0 [btrfs]
   btrfs_commit_transaction+0x2ac/0x8f0 [btrfs]
   btrfs_mksubvol+0x561/0x570 [btrfs]
   btrfs_ioctl_snap_create_transid+0x189/0x190 [btrfs]
   btrfs_ioctl_snap_create_v2+0x102/0x150 [btrfs]
   btrfs_ioctl+0x5c9/0x1e60 [btrfs]
   do_vfs_ioctl+0x90/0x5f0
   SyS_ioctl+0x74/0x80
   do_syscall_64+0x7b/0x150
   entry_SYSCALL_64_after_hwframe+0x3d/0xa2
  RIP: 0033:0x7fd7cdab8467

Fix it by explicitly checking fs_info->reloc_ctl other than using the
implied root->reloc_root.

Fixes: d2311e698578 ("btrfs: relocation: Delay reloc tree deletion after merge_reloc_roots")
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

y2038: Make CONFIG_64BIT_TIME unconditional

commit f3d964673b2f1c5d5c68c77273efcf7103eed03b upstream.

As Stepan Golosunov points out, there is a small mistake in the
get_timespec64() function in the kernel. It was originally added under the
assumption that CONFIG_64BIT_TIME would get enabled on all 32-bit and
64-bit architectures, but when the conversion was done, it was only turned
on for 32-bit ones.

The effect is that the get_timespec64() function never clears the upper
half of the tv_nsec field for 32-bit tasks in compat mode. Clearing this is
required for POSIX compliant behavior of functions that pass a 'timespec'
structure with a 64-bit tv_sec and a 32-bit tv_nsec, plus uninitialized
padding.

The easiest fix for linux-5.1 is to just make the Kconfig symbol
unconditional, as it was originally intended. As a follow-up, the #ifdef
CONFIG_64BIT_TIME can be removed completely..

Note: for native 32-bit mode, no change is needed, this works as
designed and user space should never need to clear the upper 32
bits of the tv_nsec field, in or out of the kernel.

Fixes: 00bf25d693e7 ("y2038: use time32 syscall names on 32-bit")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Joseph Myers <joseph@codesourcery.com>
Cc: libc-alpha@sourceware.org
Cc: linux-api@vger.kernel.org
Cc: Deepa Dinamani <deepa.kernel@gmail.com>
Cc: Lukasz Majewski <lukma@denx.de>
Cc: Stepan Golosunov <stepan@golosunov.pp.ru>
Link: https://lore.kernel.org/lkml/20190422090710.bmxdhhankurhafxq@sghpc.golosunov.pp.ru/
Link: https://lkml.kernel.org/r/20190429131951.471701-1-arnd@arndb.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bpf, lru: avoid messing with eviction heuristics upon syscall lookup

commit 50b045a8c0ccf44f76640ac3eea8d80ca53979a3 upstream.

One of the biggest issues we face right now with picking LRU map over
regular hash table is that a map walk out of user space, for example,
to just dump the existing entries or to remove certain ones, will
completely mess up LRU eviction heuristics and wrong entries such
as just created ones will get evicted instead. The reason for this
is that we mark an entry as "in use" via bpf_lru_node_set_ref() from
system call lookup side as well. Thus upon walk, all entries are
being marked, so information of actual least recently used ones
are "lost".

In case of Cilium where it can be used (besides others) as a BPF
based connection tracker, this current behavior causes disruption
upon control plane changes that need to walk the map from user space
to evict certain entries. Discussion result from bpfconf [0] was that
we should simply just remove marking from system call side as no
good use case could be found where it's actually needed there.
Therefore this patch removes marking for regular LRU and per-CPU
flavor. If there ever should be a need in future, the behavior could
be selected via map creation flag, but due to mentioned reason we
avoid this here.

[0] http://vger.kernel.org/bpfconf.html

Fixes: 29ba732acbee ("bpf: Add BPF_MAP_TYPE_LRU_HASH")
Fixes: 8f8449384ec3 ("bpf: Add BPF_MAP_TYPE_LRU_PERCPU_HASH")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bpf: add map_lookup_elem_sys_only for lookups from syscall side

commit c6110222c6f49ea68169f353565eb865488a8619 upstream.

Add a callback map_lookup_elem_sys_only() that map implementations
could use over map_lookup_elem() from system call side in case the
map implementation needs to handle the latter differently than from
the BPF data path. If map_lookup_elem_sys_only() is set, this will
be preferred pick for map lookups out of user space. This hook is
used in a follow-up fix for LRU map, but once development window
opens, we can convert other map types from map_lookup_elem() (here,
the one called upon BPF_MAP_LOOKUP_ELEM cmd is meant) over to use
the callback to simplify and clean up the latter.

Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bpf: relax inode permission check for retrieving bpf program

commit e547ff3f803e779a3898f1f48447b29f43c54085 upstream.

For iptable module to load a bpf program from a pinned location, it
only retrieve a loaded program and cannot change the program content so
requiring a write permission for it might not be necessary.
Also when adding or removing an unrelated iptable rule, it might need to
flush and reload the xt_bpf related rules as well and triggers the inode
permission check. It might be better to remove the write premission
check for the inode so we won't need to grant write access to all the
processes that flush and restore iptables rules.

Signed-off-by: Chenbo Feng <fengc@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

driver core: Postpone DMA tear-down until after devres release for probe failure

commit 0b777eee88d712256ba8232a9429edb17c4f9ceb upstream.

In commit 376991db4b64 ("driver core: Postpone DMA tear-down until after
devres release"), we changed the ordering of tearing down the device DMA
ops and releasing all the device's resources; this was because the DMA ops
should be maintained until we release the device's managed DMA memories.

However, we have seen another crash on an arm64 system when a
device driver probe fails:

  hisi_sas_v3_hw 0000:74:02.0: Adding to iommu group 2
  scsi host1: hisi_sas_v3_hw
  BUG: Bad page state in process swapper/0  pfn:313f5
  page:ffff7e0000c4fd40 count:1 mapcount:0
  mapping:0000000000000000 index:0x0
  flags: 0xfffe00000001000(reserved)
  raw: 0fffe00000001000 ffff7e0000c4fd48 ffff7e0000c4fd48
0000000000000000
  raw: 0000000000000000 0000000000000000 00000001ffffffff
0000000000000000
  page dumped because: PAGE_FLAGS_CHECK_AT_FREE flag(s) set
  bad because of flags: 0x1000(reserved)
  Modules linked in:
  CPU: 49 PID: 1 Comm: swapper/0 Not tainted
5.1.0-rc1-43081-g22d97fd-dirty #1433
  Hardware name: Huawei D06/D06, BIOS Hisilicon D06 UEFI
RC0 - V1.12.01 01/29/2019
  Call trace:
  dump_backtrace+0x0/0x118
  show_stack+0x14/0x1c
  dump_stack+0xa4/0xc8
  bad_page+0xe4/0x13c
  free_pages_check_bad+0x4c/0xc0
  __free_pages_ok+0x30c/0x340
  __free_pages+0x30/0x44
  __dma_direct_free_pages+0x30/0x38
  dma_direct_free+0x24/0x38
  dma_free_attrs+0x9c/0xd8
  dmam_release+0x20/0x28
  release_nodes+0x17c/0x220
  devres_release_all+0x34/0x54
  really_probe+0xc4/0x2c8
  driver_probe_device+0x58/0xfc
  device_driver_attach+0x68/0x70
  __driver_attach+0x94/0xdc
  bus_for_each_dev+0x5c/0xb4
  driver_attach+0x20/0x28
  bus_add_driver+0x14c/0x200
  driver_register+0x6c/0x124
  __pci_register_driver+0x48/0x50
  sas_v3_pci_driver_init+0x20/0x28
  do_one_initcall+0x40/0x25c
  kernel_init_freeable+0x2b8/0x3c0
  kernel_init+0x10/0x100
  ret_from_fork+0x10/0x18
  Disabling lock debugging due to kernel taint
  BUG: Bad page state in process swapper/0  pfn:313f6
  page:ffff7e0000c4fd80 count:1 mapcount:0
mapping:0000000000000000 index:0x0
[   89.322983] flags: 0xfffe00000001000(reserved)
  raw: 0fffe00000001000 ffff7e0000c4fd88 ffff7e0000c4fd88
0000000000000000
  raw: 0000000000000000 0000000000000000 00000001ffffffff
0000000000000000

The crash occurs for the same reason.

In this case, on the really_probe() failure path, we are still clearing
the DMA ops prior to releasing the device's managed memories.

This patch fixes this issue by reordering the DMA ops teardown and the
call to devres_release_all() on the failure path.

Reported-by: Xiang Chen <chenxiang66@hisilicon.com>
Tested-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dmaengine: imx-sdma: Only check ratio on parts that support 1:1

commit 941acd566b1807b291bbdca31cc5158e26ffcf83 upstream.

On imx8mq B0 chip, AHB/SDMA clock ratio 2:1 can't be supported,
since SDMA clock ratio has to be increased to 250Mhz, AHB can't reach
to 500Mhz, so use 1:1 instead.

To limit this change to the imx8mq for now this patch also adds an
im8mq-sdma compatible string.

Signed-off-by: Angus Ainslie (Purism) <angus@akkea.ca>
Acked-by: Robin Gong <yibin.gong@nxp.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Cc: Richard Leitner <richard.leitner@skidata.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>