fs/minix: remove expected error message in block_to_path()

[ Upstream commit f666f9fb9a36f1c833b9d18923572f0e4d304754 ]

When truncating a file to a size within the last allowed logical block,
block_to_path() is called with the *next* block.  This exceeds the limit,
causing the "block %ld too big" error message to be printed.

This case isn't actually an error; there are just no more blocks past that
point.  So, remove this error message.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Qiujun Huang <anenbupt@gmail.com>
Link: http://lkml.kernel.org/r/20200628060846.682158-7-ebiggers@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

fs/minix: fix block limit check for V1 filesystems

[ Upstream commit 0a12c4a8069607247cb8edc3b035a664e636fd9a ]

The minix filesystem reads its maximum file size from its on-disk
superblock.  This value isn't necessarily a multiple of the block size.
When it's not, the V1 block mapping code doesn't allow mapping the last
possible block.  Commit 6ed6a722f9ab ("minixfs: fix block limit check")
fixed this in the V2 mapping code.  Fix it in the V1 mapping code too.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Qiujun Huang <anenbupt@gmail.com>
Link: http://lkml.kernel.org/r/20200628060846.682158-6-ebiggers@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

fs/minix: set s_maxbytes correctly

[ Upstream commit 32ac86efff91a3e4ef8c3d1cadd4559e23c8e73a ]

The minix filesystem leaves super_block::s_maxbytes at MAX_NON_LFS rather
than setting it to the actual filesystem-specific limit.  This is broken
because it means userspace doesn't see the standard behavior like getting
EFBIG and SIGXFSZ when exceeding the maximum file size.

Fix this by setting s_maxbytes correctly.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Qiujun Huang <anenbupt@gmail.com>
Link: http://lkml.kernel.org/r/20200628060846.682158-5-ebiggers@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nfs: Fix getxattr kernel panic and memory overflow

[ Upstream commit b4487b93545214a9db8cbf32e86411677b0cca21 ]

Move the buffer size check to decode_attr_security_label() before memcpy()
Only call memcpy() if the buffer is large enough

Fixes: aa9c2669626c ("NFS: Client implementation of Labeled-NFS")
Signed-off-by: Jeffrey Mitchell <jeffrey.mitchell@starlab.io>
[Trond: clean up duplicate test of label->len != 0]
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: qcom/emac: add missed clk_disable_unprepare in error path of emac_clks_phase1_init

[ Upstream commit 50caa777a3a24d7027748e96265728ce748b41ef ]

Fix the missing clk_disable_unprepare() before return
from emac_clks_phase1_init() in the error handling case.

Fixes: b9b17debc69d ("net: emac: emac gigabit ethernet controller driver")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Acked-by: Timur Tabi <timur@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/vmwgfx: Fix two list_for_each loop exit tests

[ Upstream commit 4437c1152ce0e57ab8f401aa696ea6291cc07ab1 ]

These if statements are supposed to be true if we ended the
list_for_each_entry() loops without hitting a break statement but they
don't work.

In the first loop, we increment "i" after the "if (i == unit)" condition
so we don't necessarily know that "i" is not equal to unit at the end of
the loop.

In the second loop we exit when mode is not pointing to a valid
drm_display_mode struct so it doesn't make sense to check "mode->type".

Fixes: a278724aa23c ("drm/vmwgfx: Implement fbdev on kms v2")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Signed-off-by: Roland Scheidegger <sroland@vmware.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/vmwgfx: Use correct vmw_legacy_display_unit pointer

[ Upstream commit 1d2c0c565bc0da25f5e899a862fb58e612b222df ]

The "entry" pointer is an offset from the list head and it doesn't
point to a valid vmw_legacy_display_unit struct.  Presumably the
intent was to point to the last entry.

Also the "i++" wasn't used so I have removed that as well.

Fixes: d7e1958dbe4a ("drm/vmwgfx: Support older hardware.")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Signed-off-by: Roland Scheidegger <sroland@vmware.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Input: sentelic - fix error return when fsp_reg_write fails

[ Upstream commit ea38f06e0291986eb93beb6d61fd413607a30ca4 ]

Currently when the call to fsp_reg_write fails -EIO is not being returned
because the count is being returned instead of the return value in retval.
Fix this by returning the value in retval instead of count.

Addresses-Coverity: ("Unused value")
Fixes: fc69f4a6af49 ("Input: add new driver for Sentelic Finger Sensing Pad")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20200603141218.131663-1-colin.king@canonical.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

watchdog: initialize device before misc_register

[ Upstream commit cb36e29bb0e4b0c33c3d5866a0a4aebace4c99b7 ]

When watchdog device is being registered, it calls misc_register that
makes watchdog available for systemd to open. This is a data race
scenario, because when device is open it may still have device struct
not initialized - this in turn causes a crash. This patch moves
device initialization before misc_register call and it solves the
problem printed below.

------------[ cut here ]------------
WARNING: CPU: 3 PID: 1 at lib/kobject.c:612 kobject_get+0x50/0x54
kobject: '(null)' ((ptrval)): is not initialized, yet kobject_get() is being called.
Modules linked in: k2_reset_status(O) davinci_wdt(+) sfn_platform_hwbcn(O) fsmddg_sfn(O) clk_misc_mmap(O) clk_sw_bcn(O) fsp_reset(O) cma_mod(O) slave_sup_notif(O) fpga_master(O) latency(O+) evnotify(O) enable_arm_pmu(O) xge(O) rio_mport_cdev br_netfilter bridge stp llc nvrd_checksum(O) ipv6
CPU: 3 PID: 1 Comm: systemd Tainted: G           O      4.19.113-g2579778-fsm4_k2 #1
Hardware name: Keystone
[<c02126c4>] (unwind_backtrace) from [<c020da94>] (show_stack+0x18/0x1c)
[<c020da94>] (show_stack) from [<c07f87d8>] (dump_stack+0xb4/0xe8)
[<c07f87d8>] (dump_stack) from [<c0221f70>] (__warn+0xfc/0x114)
[<c0221f70>] (__warn) from [<c0221fd8>] (warn_slowpath_fmt+0x50/0x74)
[<c0221fd8>] (warn_slowpath_fmt) from [<c07fd394>] (kobject_get+0x50/0x54)
[<c07fd394>] (kobject_get) from [<c0602ce8>] (get_device+0x1c/0x24)
[<c0602ce8>] (get_device) from [<c06961e0>] (watchdog_open+0x90/0xf0)
[<c06961e0>] (watchdog_open) from [<c06001dc>] (misc_open+0x130/0x17c)
[<c06001dc>] (misc_open) from [<c0388228>] (chrdev_open+0xec/0x1a8)
[<c0388228>] (chrdev_open) from [<c037fa98>] (do_dentry_open+0x204/0x3cc)
[<c037fa98>] (do_dentry_open) from [<c0391e2c>] (path_openat+0x330/0x1148)
[<c0391e2c>] (path_openat) from [<c0394518>] (do_filp_open+0x78/0xec)
[<c0394518>] (do_filp_open) from [<c0381100>] (do_sys_open+0x130/0x1f4)
[<c0381100>] (do_sys_open) from [<c0201000>] (ret_fast_syscall+0x0/0x28)
Exception stack(0xd2ceffa8 to 0xd2cefff0)
ffa0:                   b6f69968 00000000 ffffff9c b6ebd210 000a0001 00000000
ffc0: b6f69968 00000000 00000000 00000142 fffffffd ffffffff 00b65530 bed7bb78
ffe0: 00000142 bed7ba70 b6cc2503 b6cc41d6
---[ end trace 7b16eb105513974f ]---

------------[ cut here ]------------
WARNING: CPU: 3 PID: 1 at lib/refcount.c:153 kobject_get+0x24/0x54
refcount_t: increment on 0; use-after-free.
Modules linked in: k2_reset_status(O) davinci_wdt(+) sfn_platform_hwbcn(O) fsmddg_sfn(O) clk_misc_mmap(O) clk_sw_bcn(O) fsp_reset(O) cma_mod(O) slave_sup_notif(O) fpga_master(O) latency(O+) evnotify(O) enable_arm_pmu(O) xge(O) rio_mport_cdev br_netfilter bridge stp llc nvrd_checksum(O) ipv6
CPU: 3 PID: 1 Comm: systemd Tainted: G        W  O      4.19.113-g2579778-fsm4_k2 #1
Hardware name: Keystone
[<c02126c4>] (unwind_backtrace) from [<c020da94>] (show_stack+0x18/0x1c)
[<c020da94>] (show_stack) from [<c07f87d8>] (dump_stack+0xb4/0xe8)
[<c07f87d8>] (dump_stack) from [<c0221f70>] (__warn+0xfc/0x114)
[<c0221f70>] (__warn) from [<c0221fd8>] (warn_slowpath_fmt+0x50/0x74)
[<c0221fd8>] (warn_slowpath_fmt) from [<c07fd368>] (kobject_get+0x24/0x54)
[<c07fd368>] (kobject_get) from [<c0602ce8>] (get_device+0x1c/0x24)
[<c0602ce8>] (get_device) from [<c06961e0>] (watchdog_open+0x90/0xf0)
[<c06961e0>] (watchdog_open) from [<c06001dc>] (misc_open+0x130/0x17c)
[<c06001dc>] (misc_open) from [<c0388228>] (chrdev_open+0xec/0x1a8)
[<c0388228>] (chrdev_open) from [<c037fa98>] (do_dentry_open+0x204/0x3cc)
[<c037fa98>] (do_dentry_open) from [<c0391e2c>] (path_openat+0x330/0x1148)
[<c0391e2c>] (path_openat) from [<c0394518>] (do_filp_open+0x78/0xec)
[<c0394518>] (do_filp_open) from [<c0381100>] (do_sys_open+0x130/0x1f4)
[<c0381100>] (do_sys_open) from [<c0201000>] (ret_fast_syscall+0x0/0x28)
Exception stack(0xd2ceffa8 to 0xd2cefff0)
ffa0:                   b6f69968 00000000 ffffff9c b6ebd210 000a0001 00000000
ffc0: b6f69968 00000000 00000000 00000142 fffffffd ffffffff 00b65530 bed7bb78
ffe0: 00000142 bed7ba70 b6cc2503 b6cc41d6
---[ end trace 7b16eb1055139750 ]---

Fixes: 72139dfa2464 ("watchdog: Fix the race between the release of watchdog_core_data and cdev")
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Alexander Sverdlin <alexander.sverdlin@nokia.com>
Signed-off-by: Krzysztof Sobota <krzysztof.sobota@nokia.com>
Link: https://lore.kernel.org/r/20200717103109.14660-1-krzysztof.sobota@nokia.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: lpfc: nvmet: Avoid hang / use-after-free again when destroying targetport

[ Upstream commit af6de8c60fe9433afa73cea6fcccdccd98ad3e5e ]

We cannot wait on a completion object in the lpfc_nvme_targetport structure
in the _destroy_targetport() code path because the NVMe/fc transport will
free that structure immediately after the .targetport_delete() callback.
This results in a use-after-free, and a crash if slub_debug=FZPU is
enabled.

An earlier fix put put the completion on the stack, but commit 2a0fb340fcc8
("scsi: lpfc: Correct localport timeout duration error") subsequently
changed the code to reference the completion through a pointer in the
object rather than the local stack variable.  Fix this by using the stack
variable directly.

Link: https://lore.kernel.org/r/20200729231011.13240-1-emilne@redhat.com
Fixes: 2a0fb340fcc8 ("scsi: lpfc: Correct localport timeout duration error")
Reviewed-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

openrisc: Fix oops caused when dumping stack

[ Upstream commit 57b8e277c33620e115633cdf700a260b55095460 ]

When dumping a stack with 'cat /proc/#/stack' the kernel would oops.
For example:

    # cat /proc/690/stack
    Unable to handle kernel access
     at virtual address 0x7fc60f58

    Oops#: 0000
    CPU #: 0
       PC: c00097fc    SR: 0000807f    SP: d6f09b9c
    GPR00: 00000000 GPR01: d6f09b9c GPR02: d6f09bb8 GPR03: d6f09bc4
    GPR04: 7fc60f5c GPR05: c00099b4 GPR06: 00000000 GPR07: d6f09ba3
    GPR08: ffffff00 GPR09: c0009804 GPR10: d6f08000 GPR11: 00000000
    GPR12: ffffe000 GPR13: dbb86000 GPR14: 00000001 GPR15: dbb86250
    GPR16: 7fc60f63 GPR17: 00000f5c GPR18: d6f09bc4 GPR19: 00000000
    GPR20: c00099b4 GPR21: ffffffc0 GPR22: 00000000 GPR23: 00000000
    GPR24: 00000001 GPR25: 000002c6 GPR26: d78b6850 GPR27: 00000001
    GPR28: 00000000 GPR29: dbb86000 GPR30: ffffffff GPR31: dbb862fc
      RES: 00000000 oGPR11: ffffffff
    Process cat (pid: 702, stackpage=d79d6000)

    Stack:
    Call trace:
    [<598977f2>] save_stack_trace_tsk+0x40/0x74
    [<95063f0e>] stack_trace_save_tsk+0x44/0x58
    [<b557bfdd>] proc_pid_stack+0xd0/0x13c
    [<a2df8eda>] proc_single_show+0x6c/0xf0
    [<e5a737b7>] seq_read+0x1b4/0x688
    [<2d6c7480>] do_iter_read+0x208/0x248
    [<2182a2fb>] vfs_readv+0x64/0x90

This was caused by the stack trace code in save_stack_trace_tsk using
the wrong stack pointer.  It was using the user stack pointer instead of
the kernel stack pointer.  Fix this by using the right stack.

Also for good measure we add try_get_task_stack/put_task_stack to ensure
the task is not lost while we are walking it's stack.

Fixes: eecac38b0423a ("openrisc: support framepointers and STACKTRACE_SUPPORT")
Signed-off-by: Stafford Horne <shorne@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

i2c: rcar: avoid race when unregistering slave

[ Upstream commit c7c9e914f9a0478fba4dc6f227cfd69cf84a4063 ]

Due to the lockless design of the driver, it is theoretically possible
to access a NULL pointer, if a slave interrupt was running while we were
unregistering the slave. To make this rock solid, disable the interrupt
for a short time while we are clearing the interrupt_enable register.
This patch is purely based on code inspection. The OOPS is super-hard to
trigger because clearing SAR (the address) makes interrupts even more
unlikely to happen as well. While here, reinit SCR to SDBS because this
bit should always be set according to documentation. There is no effect,
though, because the interface is disabled.

Fixes: 7b814d852af6 ("i2c: rcar: avoid race when unregistering slave client")
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tools build feature: Use CC and CXX from parent

[ Upstream commit e3232c2f39acafd5a29128425bc30b9884642cfa ]

commit c8c188679ccf ("tools build: Use the same CC for feature detection
and actual build") changed these assignments from unconditional (:=) to
conditional (?=) so that they wouldn't clobber values from the
environment. However, conditional assignment does not work properly for
variables that Make implicitly sets, among which are CC and CXX. To
quote tools/scripts/Makefile.include, which handles this properly:

  # Makefiles suck: This macro sets a default value of $(2) for the
  # variable named by $(1), unless the variable has been set by
  # environment or command line. This is necessary for CC and AR
  # because make sets default values, so the simpler ?= approach
  # won't work as expected.

In other words, the conditional assignments will not run even if the
variables are not overridden in the environment; Make will set CC to
"cc" and CXX to "g++" when it starts[1], meaning the variables are not
empty by the time the conditional assignments are evaluated. This breaks
cross-compilation when CROSS_COMPILE is set but CC isn't, since "cc"
gets used for feature detection instead of the cross compiler (and
likewise for CXX).

To fix the issue, just pass down the values of CC and CXX computed by
the parent Makefile, which gets included by the Makefile that actually
builds whatever we're detecting features for and so is guaranteed to
have good values. This is a better solution anyway, since it means we
aren't trying to replicate the logic of the parent build system and so
don't risk it getting out of sync.

Leave PKG_CONFIG alone, since 1) there's no common logic to compute it
in Makefile.include, and 2) it's not an implicit variable, so
conditional assignment works properly.

[1] https://www.gnu.org/software/make/manual/html_node/Implicit-Variables.html

Fixes: c8c188679ccf ("tools build: Use the same CC for feature detection and actual build")
Signed-off-by: Thomas Hebb <tommyhebb@gmail.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Carrillo-Cisneros <davidcc@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Igor Lubashev <ilubashe@akamai.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Quentin Monnet <quentin@isovalent.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: thomas hebb <tommyhebb@gmail.com>
Link: http://lore.kernel.org/lkml/0a6e69d1736b0fa231a648f50b0cce5d8a6734ef.1595822871.git.tommyhebb@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pwm: bcm-iproc: handle clk_get_rate() return

[ Upstream commit 6ced5ff0be8e94871ba846dfbddf69d21363f3d7 ]

Handle clk_get_rate() returning 0 to avoid possible division by zero.

Fixes: daa5abc41c80 ("pwm: Add support for Broadcom iProc PWM controller")
Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com>
Signed-off-by: Scott Branden <scott.branden@broadcom.com>
Reviewed-by: Ray Jui <ray.jui@broadcom.com>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: clk-atlas6: fix return value check in atlas6_clk_init()

[ Upstream commit 12b90b40854a8461a02ef19f6f4474cc88d64b66 ]

In case of error, the function clk_register() returns ERR_PTR()
and never returns NULL. The NULL test in the return value check
should be replaced with IS_ERR().

Signed-off-by: Xu Wang <vulab@iscas.ac.cn>
Link: https://lore.kernel.org/r/20200713032143.21362-1-vulab@iscas.ac.cn
Acked-by: Barry Song <baohua@kernel.org>
Fixes: 7bf21bc81f28 ("clk: sirf: re-arch to make the codes support both prima2 and atlas6")
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

i2c: rcar: slave: only send STOP event when we have been addressed

[ Upstream commit 314139f9f0abdba61ed9a8463bbcb0bf900ac5a2 ]

When the SSR interrupt is activated, it will detect every STOP condition
on the bus, not only the ones after we have been addressed. So, enable
this interrupt only after we have been addressed, and disable it
otherwise.

Fixes: de20d1857dd6 ("i2c: rcar: add slave support")
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iommu/vt-d: Enforce PASID devTLB field mask

[ Upstream commit 5f77d6ca5ca74e4b4a5e2e010f7ff50c45dea326 ]

Set proper masks to avoid invalid input spillover to reserved bits.

Signed-off-by: Liu Yi L <yi.l.liu@intel.com>
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Link: https://lore.kernel.org/r/20200724014925.15523-2-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iommu/omap: Check for failure of a call to omap_iommu_dump_ctx

[ Upstream commit dee9d154f40c58d02f69acdaa5cfd1eae6ebc28b ]

It is possible for the call to omap_iommu_dump_ctx to return
a negative error number, so check for the failure and return
the error number rather than pass the negative value to
simple_read_from_buffer.

Fixes: 14e0e6796a0d ("OMAP: iommu: add initial debugfs support")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20200714192211.744776-1-colin.king@canonical.com
Addresses-Coverity: ("Improper use of negative value")
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests/powerpc: ptrace-pkey: Don't update expected UAMOR value

[ Upstream commit 3563b9bea0ca7f53e4218b5e268550341a49f333 ]

With commit 4a4a5e5d2aad ("powerpc/pkeys: key allocation/deallocation
must not change pkey registers") we are not updating UAMOR on key
allocation. So don't update the expected uamor value in the test.

Fixes: 4a4a5e5d2aad ("powerpc/pkeys: key allocation/deallocation must not change pkey registers")
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200709032946.881753-23-aneesh.kumar@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests/powerpc: ptrace-pkey: Update the test to mark an invalid pkey correctly

[ Upstream commit 0eaa3b5ca7b5a76e3783639c828498343be66a01 ]

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200709032946.881753-22-aneesh.kumar@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests/powerpc: ptrace-pkey: Rename variables to make it easier to follow code

[ Upstream commit 9a11f12e0a6c374b3ef1ce81e32ce477d28eb1b8 ]

Rename variable to indicate that they are invalid values which we will
use to test ptrace update of pkeys.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200709032946.881753-21-aneesh.kumar@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

dm rq: don't call blk_mq_queue_stopped() in dm_stop_queue()

[ Upstream commit e766668c6cd49d741cfb49eaeb38998ba34d27bc ]

dm_stop_queue() only uses blk_mq_quiesce_queue() so it doesn't
formally stop the blk-mq queue; therefore there is no point making the
blk_mq_queue_stopped() check -- it will never be stopped.

In addition, even though dm_stop_queue() actually tries to quiesce hw
queues via blk_mq_quiesce_queue(), checking with blk_queue_quiesced()
to avoid unnecessary queue quiesce isn't reliable because: the
QUEUE_FLAG_QUIESCED flag is set before synchronize_rcu() and
dm_stop_queue() may be called when synchronize_rcu() from another
blk_mq_quiesce_queue() is in-progress.

Fixes: 7b17c2f7292ba ("dm: Fix a race condition related to stopping and starting queues")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

gpu: ipu-v3: image-convert: Combine rotate/no-rotate irq handlers

[ Upstream commit 0f6245f42ce9b7e4d20f2cda8d5f12b55a44d7d1 ]

Combine the rotate_irq() and norotate_irq() handlers into a single
eof_irq() handler.

Signed-off-by: Steve Longerbeam <slongerbeam@gmail.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mmc: renesas_sdhi_internal_dmac: clean up the code for dma complete

[ Upstream commit 2b26e34e9af3fa24fa1266e9ea2d66a1f7d62dc0 ]

To add end() operation in the future, clean the code of
renesas_sdhi_internal_dmac_complete_tasklet_fn(). No behavior change.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/1590044466-28372-3-git-send-email-yoshihiro.shimoda.uh@renesas.com
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

USB: serial: ftdi_sio: clean up receive processing

[ Upstream commit ce054039ba5e47b75a3be02a00274e52b06a6456 ]

Clean up receive processing by dropping the character pointer and
keeping the length argument unchanged throughout the function.

Also make it more apparent that sysrq processing can consume a
characters by adding an explicit continue.

Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

USB: serial: ftdi_sio: make process-packet buffer unsigned

[ Upstream commit ab4cc4ef6724ea588e835fc1e764c4b4407a70b7 ]

Use an unsigned type for the process-packet buffer argument and give it
a more apt name.

Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: rockchip: rga: Only set output CSC mode for RGB input

[ Upstream commit 0f879bab72f47e8ba2421a984e7acfa763d3e84e ]

Setting the output CSC mode is required for a YUV output, but must not
be set when the input is also YUV. Doing this (as tested with a YUV420P
to YUV420P conversion) results in wrong colors.

Adapt the logic to only set the output CSC mode when the output is YUV and
the input is RGB. Also add a comment to clarify the rationale.

Fixes: f7e7b48e6d79 ("[media] rockchip/rga: v4l2 m2m support")
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: rockchip: rga: Introduce color fmt macros and refactor CSC mode logic

[ Upstream commit ded874ece29d3fe2abd3775810a06056067eb68c ]

This introduces two macros: RGA_COLOR_FMT_IS_YUV and RGA_COLOR_FMT_IS_RGB
which allow quick checking of the colorspace familily of a RGA color format.

These macros are then used to refactor the logic for CSC mode selection.
The two nested tests for input colorspace are simplified into a single one,
with a logical and, making the whole more readable.

Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/ipoib: Fix ABBA deadlock with ipoib_reap_ah()

[ Upstream commit 65936bf25f90fe440bb2d11624c7d10fab266639 ]

ipoib_mcast_carrier_on_task() insanely open codes a rtnl_lock() such that
the only time flush_workqueue() can be called is if it also clears
IPOIB_FLAG_OPER_UP.

Thus the flush inside ipoib_flush_ah() will deadlock if it gets unlucky
enough, and lockdep doesn't help us to find it early:

          CPU0               CPU1          CPU2
   __ipoib_ib_dev_flush()
      down_read(vlan_rwsem)

                         ipoib_vlan_add()
                           rtnl_trylock()
                           down_write(vlan_rwsem)

      ipoib_mcast_carrier_on_task()
 while (!rtnl_trylock())
      msleep(20);

      ipoib_flush_ah()
flush_workqueue(priv->wq)

Clean up the ah_reaper related functions and lifecycle to make sense:

 - Start/Stop of the reaper should only be done in open/stop NDOs, not in
   any other places

 - cancel and flush of the reaper should only happen in the stop NDO.
   cancel is only functional when combined with IPOIB_STOP_REAPER.

 - Non-stop places were flushing the AH's just need to flush out dead AH's
   synchronously and ignore the background task completely. It is fully
   locked and harmless to leave running.

Which ultimately fixes the ABBA deadlock by removing the unnecessary
flush_workqueue() from the problematic place under the vlan_rwsem.

Fixes: efc82eeeae4e ("IB/ipoib: No longer use flush as a parameter")
Link: https://lore.kernel.org/r/20200625174219.290842-1-kamalheib1@gmail.com
Reported-by: Kamal Heib <kheib@redhat.com>
Tested-by: Kamal Heib <kheib@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/ipoib: Return void from ipoib_ib_dev_stop()

[ Upstream commit 95a5631f6c9f3045f26245e6045244652204dfdb ]

The return value from ipoib_ib_dev_stop() is always 0 - change it to be
void.

Link: https://lore.kernel.org/r/20200623105236.18683-1-kamalheib1@gmail.com
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mfd: arizona: Ensure 32k clock is put on driver unbind and error

[ Upstream commit ddff6c45b21d0437ce0c85f8ac35d7b5480513d7 ]

Whilst it doesn't matter if the internal 32k clock register settings
are cleaned up on exit, as the part will be turned off losing any
settings, hence the driver hasn't historially bothered. The external
clock should however be cleaned up, as it could cause clocks to be
left on, and will at best generate a warning on unbind.

Add clean up on both the probe error path and unbind for the 32k
clock.

Fixes: cdd8da8cc66b ("mfd: arizona: Add gating of external MCLKn clocks")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/imx: imx-ldb: Disable both channels for split mode in enc->disable()

commit 3b2a999582c467d1883716b37ffcc00178a13713 upstream.

Both of the two LVDS channels should be disabled for split mode
in the encoder's ->disable() callback, because they are enabled
in the encoder's ->enable() callback.

Fixes: 6556f7f82b9c ("drm: imx: Move imx-drm driver out of staging")
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

remoteproc: qcom: q6v5: Update running state before requesting stop

commit 5b7be880074c73540948f8fc597e0407b98fabfa upstream.

Sometimes the stop triggers a watchdog rather than a stop-ack. Update
the running state to false on requesting stop to skip the watchdog
instead.

Error Logs:
$ echo stop > /sys/class/remoteproc/remoteproc0/state
ipa 1e40000.ipa: received modem stopping event
remoteproc-modem: watchdog received: sys_m_smsm_mpss.c:291:APPS force stop
qcom-q6v5-mss 4080000.remoteproc-modem: port failed halt
ipa 1e40000.ipa: received modem offline event
remoteproc0: stopped remote processor 4080000.remoteproc-modem

Reviewed-by: Evan Green <evgreen@chromium.org>
Fixes: 3b415c8fb263 ("remoteproc: q6v5: Extract common resource handling")
Cc: stable@vger.kernel.org
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Link: https://lore.kernel.org/r/20200602163257.26978-1-sibis@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf intel-pt: Fix FUP packet state

commit 401136bb084fd021acd9f8c51b52fe0a25e326b2 upstream.

While walking code towards a FUP ip, the packet state is
INTEL_PT_STATE_FUP or INTEL_PT_STATE_FUP_NO_TIP. That was mishandled
resulting in the state becoming INTEL_PT_STATE_IN_SYNC prematurely.  The
result was an occasional lost EXSTOP event.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: stable@vger.kernel.org
Link: http://lore.kernel.org/lkml/20200710151104.15137-2-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

module: Correctly truncate sysfs sections output

commit 11990a5bd7e558e9203c1070fc52fb6f0488e75b upstream.

The only-root-readable /sys/module/$module/sections/$section files
did not truncate their output to the available buffer size. While most
paths into the kernfs read handlers end up using PAGE_SIZE buffers,
it's possible to get there through other paths (e.g. splice, sendfile).
Actually limit the output to the "count" passed into the read function,
and report it back correctly. *sigh*

Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/lkml/20200805002015.GE23458@shao2-debian
Fixes: ed66f991bb19 ("module: Refactor section attr into bin attribute")
Cc: stable@vger.kernel.org
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Jessica Yu <jeyu@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

pseries: Fix 64 bit logical memory block panic

commit 89c140bbaeee7a55ed0360a88f294ead2b95201b upstream.

Booting with a 4GB LMB size causes us to panic:

  qemu-system-ppc64: OS terminated: OS panic:
      Memory block size not suitable: 0x0

Fix pseries_memory_block_size() to handle 64 bit LMBs.

Cc: stable@vger.kernel.org
Signed-off-by: Anton Blanchard <anton@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200715000820.1255764-1-anton@ozlabs.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

watchdog: f71808e_wdt: clear watchdog timeout occurred flag

commit 4f39d575844148fbf3081571a1f3b4ae04150958 upstream.

The flag indicating a watchdog timeout having occurred normally persists
till Power-On Reset of the Fintek Super I/O chip. The user can clear it
by writing a `1' to the bit.

The driver doesn't offer a restart method, so regular system reboot
might not reset the Super I/O and if the watchdog isn't enabled, we
won't touch the register containing the bit on the next boot.
In this case all subsequent regular reboots will be wrongly flagged
by the driver as being caused by the watchdog.

Fix this by having the flag cleared after read. This is also done by
other drivers like those for the i6300esb and mpc8xxx_wdt.

Fixes: b97cb21a4634 ("watchdog: f71808e_wdt: Fix WDTMOUT_STS register read")
Cc: stable@vger.kernel.org
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20200611191750.28096-5-a.fatoum@pengutronix.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

watchdog: f71808e_wdt: remove use of wrong watchdog_info option

commit 802141462d844f2e6a4d63a12260d79b7afc4c34 upstream.

The flags that should be or-ed into the watchdog_info.options by drivers
all start with WDIOF_, e.g. WDIOF_SETTIMEOUT, which indicates that the
driver's watchdog_ops has a usable set_timeout.

WDIOC_SETTIMEOUT was used instead, which expands to 0xc0045706, which
equals:

   WDIOF_FANFAULT | WDIOF_EXTERN1 | WDIOF_PRETIMEOUT | WDIOF_ALARMONLY |
   WDIOF_MAGICCLOSE | 0xc0045000

These were so far indicated to userspace on WDIOC_GETSUPPORT.
As the driver has not yet been migrated to the new watchdog kernel API,
the constant can just be dropped without substitute.

Fixes: 96cb4eb019ce ("watchdog: f71808e_wdt: new watchdog driver for Fintek F71808E and F71882FG")
Cc: stable@vger.kernel.org
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20200611191750.28096-4-a.fatoum@pengutronix.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

watchdog: f71808e_wdt: indicate WDIOF_CARDRESET support in watchdog_info.options

commit e871e93fb08a619dfc015974a05768ed6880fd82 upstream.

The driver supports populating bootstatus with WDIOF_CARDRESET, but so
far userspace couldn't portably determine whether absence of this flag
meant no watchdog reset or no driver support. Or-in the bit to fix this.

Fixes: b97cb21a4634 ("watchdog: f71808e_wdt: Fix WDTMOUT_STS register read")
Cc: stable@vger.kernel.org
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20200611191750.28096-3-a.fatoum@pengutronix.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tracing: Use trace_sched_process_free() instead of exit() for pid tracing

commit afcab636657421f7ebfa0783a91f90256bba0091 upstream.

On exit, if a process is preempted after the trace_sched_process_exit()
tracepoint but before the process is done exiting, then when it gets
scheduled in, the function tracers will not filter it properly against the
function tracing pid filters.

That is because the function tracing pid filters hooks to the
sched_process_exit() tracepoint to remove the exiting task's pid from the
filter list. Because the filtering happens at the sched_switch tracepoint,
when the exiting task schedules back in to finish up the exit, it will no
longer be in the function pid filtering tables.

This was noticeable in the notrace self tests on a preemptable kernel, as
the tests would fail as it exits and preempted after being taken off the
notrace filter table and on scheduling back in it would not be in the
notrace list, and then the ending of the exit function would trace. The test
detected this and would fail.

Cc: stable@vger.kernel.org
Cc: Namhyung Kim <namhyung@kernel.org>
Fixes: 1e10486ffee0a ("ftrace: Add 'function-fork' trace option")
Fixes: c37775d57830a ("tracing: Add infrastructure to allow set_event_pid to follow children"
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tracing/hwlat: Honor the tracing_cpumask

commit 96b4833b6827a62c295b149213c68b559514c929 upstream.

In calculation of the cpu mask for the hwlat kernel thread, the wrong
cpu mask is used instead of the tracing_cpumask, this causes the
tracing/tracing_cpumask useless for hwlat tracer. Fixes it.

Link: https://lkml.kernel.org/r/20200730082318.42584-2-haokexin@gmail.com
Cc: Ingo Molnar <mingo@redhat.com>
Cc: stable@vger.kernel.org
Fixes: 0330f7aa8ee6 ("tracing: Have hwlat trace migrate across tracing_cpumask CPUs")
Signed-off-by: Kevin Hao <haokexin@gmail.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kprobes: Fix NULL pointer dereference at kprobe_ftrace_handler

commit 0cb2f1372baa60af8456388a574af6133edd7d80 upstream.

We found a case of kernel panic on our server. The stack trace is as
follows(omit some irrelevant information):

  BUG: kernel NULL pointer dereference, address: 0000000000000080
  RIP: 0010:kprobe_ftrace_handler+0x5e/0xe0
  RSP: 0018:ffffb512c6550998 EFLAGS: 00010282
  RAX: 0000000000000000 RBX: ffff8e9d16eea018 RCX: 0000000000000000
  RDX: ffffffffbe1179c0 RSI: ffffffffc0535564 RDI: ffffffffc0534ec0
  RBP: ffffffffc0534ec1 R08: ffff8e9d1bbb0f00 R09: 0000000000000004
  R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
  R13: ffff8e9d1f797060 R14: 000000000000bacc R15: ffff8e9ce13eca00
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 0000000000000080 CR3: 00000008453d0005 CR4: 00000000003606e0
  DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
  DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
  Call Trace:
   <IRQ>
   ftrace_ops_assist_func+0x56/0xe0
   ftrace_call+0x5/0x34
   tcpa_statistic_send+0x5/0x130 [ttcp_engine]

The tcpa_statistic_send is the function being kprobed. After analysis,
the root cause is that the fourth parameter regs of kprobe_ftrace_handler
is NULL. Why regs is NULL? We use the crash tool to analyze the kdump.

  crash> dis tcpa_statistic_send -r
         <tcpa_statistic_send>: callq 0xffffffffbd8018c0 <ftrace_caller>

The tcpa_statistic_send calls ftrace_caller instead of ftrace_regs_caller.
So it is reasonable that the fourth parameter regs of kprobe_ftrace_handler
is NULL. In theory, we should call the ftrace_regs_caller instead of the
ftrace_caller. After in-depth analysis, we found a reproducible path.

  Writing a simple kernel module which starts a periodic timer. The
  timer's handler is named 'kprobe_test_timer_handler'. The module
  name is kprobe_test.ko.

  1) insmod kprobe_test.ko
  2) bpftrace -e 'kretprobe:kprobe_test_timer_handler {}'
  3) echo 0 > /proc/sys/kernel/ftrace_enabled
  4) rmmod kprobe_test
  5) stop step 2) kprobe
  6) insmod kprobe_test.ko
  7) bpftrace -e 'kretprobe:kprobe_test_timer_handler {}'

We mark the kprobe as GONE but not disarm the kprobe in the step 4).
The step 5) also do not disarm the kprobe when unregister kprobe. So
we do not remove the ip from the filter. In this case, when the module
loads again in the step 6), we will replace the code to ftrace_caller
via the ftrace_module_enable(). When we register kprobe again, we will
not replace ftrace_caller to ftrace_regs_caller because the ftrace is
disabled in the step 3). So the step 7) will trigger kernel panic. Fix
this problem by disarming the kprobe when the module is going away.

Link: https://lkml.kernel.org/r/20200728064536.24405-1-songmuchun@bytedance.com
Cc: stable@vger.kernel.org
Fixes: ae6aa16fdc16 ("kprobes: introduce ftrace based optimization")
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Co-developed-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ftrace: Setup correct FTRACE_FL_REGS flags for module

commit 8a224ffb3f52b0027f6b7279854c71a31c48fc97 upstream.

When module loaded and enabled, we will use __ftrace_replace_code
for module if any ftrace_ops referenced it found. But we will get
wrong ftrace_addr for module rec in ftrace_get_addr_new, because
rec->flags has not been setup correctly. It can cause the callback
function of a ftrace_ops has FTRACE_OPS_FL_SAVE_REGS to be called
with pt_regs set to NULL.
So setup correct FTRACE_FL_REGS flags for rec when we call
referenced_filters to find ftrace_ops references it.

Link: https://lkml.kernel.org/r/20200728180554.65203-1-zhouchengming@bytedance.com
Cc: stable@vger.kernel.org
Fixes: 8c4f3c3fa9681 ("ftrace: Check module functions being traced on reload")
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm/page_counter.c: fix protection usage propagation

commit a6f23d14ec7d7d02220ad8bb2774be3322b9aeec upstream.

When workload runs in cgroups that aren't directly below root cgroup and
their parent specifies reclaim protection, it may end up ineffective.

The reason is that propagate_protected_usage() is not called in all
hierarchy up.  All the protected usage is incorrectly accumulated in the
workload's parent.  This means that siblings_low_usage is overestimated
and effective protection underestimated.  Even though it is transitional
phenomenon (uncharge path does correct propagation and fixes the wrong
children_low_usage), it can undermine the intended protection
unexpectedly.

We have noticed this problem while seeing a swap out in a descendant of a
protected memcg (intermediate node) while the parent was conveniently
under its protection limit and the memory pressure was external to that
hierarchy.  Michal has pinpointed this down to the wrong
siblings_low_usage which led to the unwanted reclaim.

The fix is simply updating children_low_usage in respective ancestors also
in the charging path.

Fixes: 230671533d64 ("mm: memory.low hierarchical behavior")
Signed-off-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Roman Gushchin <guro@fb.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: <stable@vger.kernel.org> [4.18+]
Link: http://lkml.kernel.org/r/20200803153231.15477-1-mhocko@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ocfs2: change slot number type s16 to u16

commit 38d51b2dd171ad973afc1f5faab825ed05a2d5e9 upstream.

Dan Carpenter reported the following static checker warning.

fs/ocfs2/super.c:1269 ocfs2_parse_options() warn: '(-1)' 65535 can't fit into 32767 'mopt->slot'
fs/ocfs2/suballoc.c:859 ocfs2_init_inode_steal_slot() warn: '(-1)' 65535 can't fit into 32767 'osb->s_inode_steal_slot'
fs/ocfs2/suballoc.c:867 ocfs2_init_meta_steal_slot() warn: '(-1)' 65535 can't fit into 32767 'osb->s_meta_steal_slot'

That's because OCFS2_INVALID_SLOT is (u16)-1. Slot number in ocfs2 can be
never negative, so change s16 to u16.

Fixes: 9277f8334ffc ("ocfs2: fix value of OCFS2_INVALID_SLOT")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Reviewed-by: Gang He <ghe@suse.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Jun Piao <piaojun@huawei.com>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/20200627001259.19757-1-junxiao.bi@oracle.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext2: fix missing percpu_counter_inc

commit bc2fbaa4d3808aef82dd1064a8e61c16549fe956 upstream.

sbi->s_freeinodes_counter is only decreased by the ext2 code, it is never
increased. This patch fixes it.

Note that sbi->s_freeinodes_counter is only used in the algorithm that
tries to find the group for new allocations, so this bug is not easily
visible (the only visibility is that the group finding algorithm selects
inoptinal result).

Link: https://lore.kernel.org/r/alpine.LRH.2.02.2004201538300.19436@file01.intranet.prod.int.rdu2.redhat.com
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

MIPS: CPU#0 is not hotpluggable

commit 9cce844abf07b683cff5f0273977d5f8d0af94c7 upstream.

Now CPU#0 is not hotpluggable on MIPS, so prevent to create /sys/devices
/system/cpu/cpu0/online which confuses some user-space tools.

Cc: stable@vger.kernel.org
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

driver core: Avoid binding drivers to dead devices

commit 654888327e9f655a9d55ad477a9583e90e8c9b5c upstream.

Commit 3451a495ef24 ("driver core: Establish order of operations for
device_add and device_del via bitflag") sought to prevent asynchronous
driver binding to a device which is being removed.  It added a
per-device "dead" flag which is checked in the following code paths:

* asynchronous binding in __driver_attach_async_helper()
*  synchronous binding in device_driver_attach()
* asynchronous binding in __device_attach_async_helper()

It did *not* check the flag upon:

*  synchronous binding in __device_attach()

However __device_attach() may also be called asynchronously from:

deferred_probe_work_func()
  bus_probe_device()
    device_initial_probe()
      __device_attach()

So if the commit's intention was to check the "dead" flag in all
asynchronous code paths, then a check is also necessary in
__device_attach().  Add the missing check.

Fixes: 3451a495ef24 ("driver core: Establish order of operations for device_add and device_del via bitflag")
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Cc: stable@vger.kernel.org # v5.1+
Cc: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Link: https://lore.kernel.org/r/de88a23a6fe0ef70f7cfd13c8aea9ab51b4edab6.1594214103.git.lukas@wunner.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mac80211: fix misplaced while instead of if

commit 5981fe5b0529ba25d95f37d7faa434183ad618c5 upstream.

This never was intended to be a 'while' loop, it should've
just been an 'if' instead of 'while'. Fix this.

I noticed this while applying another patch from Ben that
intended to fix a busy loop at this spot.

Cc: stable@vger.kernel.org
Fixes: b16798f5b907 ("mac80211: mark station unauthorized before key removal")
Reported-by: Ben Greear <greearb@candelatech.com>
Link: https://lore.kernel.org/r/20200803110209.253009ae41ff.I3522aad099392b31d5cf2dcca34cbac7e5832dde@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bcache: fix overflow in offset_to_stripe()

commit 7a1481267999c02abf4a624515c1b5c7c1fccbd6 upstream.

offset_to_stripe() returns the stripe number (in type unsigned int) from
an offset (in type uint64_t) by the following calculation,
do_div(offset, d->stripe_size);
For large capacity backing device (e.g. 18TB) with small stripe size
(e.g. 4KB), the result is 4831838208 and exceeds UINT_MAX. The actual
returned value which caller receives is 536870912, due to the overflow.

Indeed in bcache_device_init(), bcache_device->nr_stripes is limited in
range [1, INT_MAX]. Therefore all valid stripe numbers in bcache are
in range [0, bcache_dev->nr_stripes - 1].

This patch adds a upper limition check in offset_to_stripe(): the max
valid stripe number should be less than bcache_device->nr_stripes. If
the calculated stripe number from do_div() is equal to or larger than
bcache_device->nr_stripe, -EINVAL will be returned. (Normally nr_stripes
is less than INT_MAX, exceeding upper limitation doesn't mean overflow,
therefore -EOVERFLOW is not used as error code.)

This patch also changes nr_stripes' type of struct bcache_device from
'unsigned int' to 'int', and return value type of offset_to_stripe()
from 'unsigned int' to 'int', to match their exact data ranges.

All locations where bcache_device->nr_stripes and offset_to_stripe() are
referenced also get updated for the above type change.

Reported-and-tested-by: Ken Raeburn <raeburn@redhat.com>
Signed-off-by: Coly Li <colyli@suse.de>
Cc: stable@vger.kernel.org
Link: https://bugzilla.redhat.com/show_bug.cgi?id=1783075
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bcache: allocate meta data pages as compound pages

commit 5fe48867856367142d91a82f2cbf7a57a24cbb70 upstream.

There are some meta data of bcache are allocated by multiple pages,
and they are used as bio bv_page for I/Os to the cache device. for
example cache_set->uuids, cache->disk_buckets, journal_write->data,
bset_tree->data.

For such meta data memory, all the allocated pages should be treated
as a single memory block. Then the memory management and underlying I/O
code can treat them more clearly.

This patch adds __GFP_COMP flag to all the location allocating >0 order
pages for the above mentioned meta data. Then their pages are treated
as compound pages now.

Signed-off-by: Coly Li <colyli@suse.de>
Cc: stable@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

md/raid5: Fix Force reconstruct-write io stuck in degraded raid5

commit a1c6ae3d9f3dd6aa5981a332a6f700cf1c25edef upstream.

In degraded raid5, we need to read parity to do reconstruct-write when
data disks fail. However, we can not read parity from
handle_stripe_dirtying() in force reconstruct-write mode.

Reproducible Steps:

1. Create degraded raid5
mdadm -C /dev/md2 --assume-clean -l5 -n3 /dev/sda2 /dev/sdb2 missing
2. Set rmw_level to 0
echo 0 > /sys/block/md2/md/rmw_level
3. IO to raid5

Now some io may be stuck in raid5. We can use handle_stripe_fill() to read
the parity in this situation.

Cc: <stable@vger.kernel.org> # v4.4+
Reviewed-by: Alex Wu <alexwu@synology.com>
Reviewed-by: BingJing Chang <bingjingc@synology.com>
Reviewed-by: Danny Shih <dannyshih@synology.com>
Signed-off-by: ChangSyun Peng <allenpeng@synology.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/compat: Add missing sock updates for SCM_RIGHTS

commit d9539752d23283db4692384a634034f451261e29 upstream.

Add missed sock updates to compat path via a new helper, which will be
used more in coming patches. (The net/core/scm.c code is left as-is here
to assist with -stable backports for the compat path.)

Cc: Christoph Hellwig <hch@lst.de>
Cc: Sargun Dhillon <sargun@sargun.me>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: stable@vger.kernel.org
Fixes: 48a87cc26c13 ("net: netprio: fd passed in SCM_RIGHTS datagram not set correctly")
Fixes: d84295067fc7 ("net: net_cls: fd passed in SCM_RIGHTS datagram not set correctly")
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: stmmac: dwmac1000: provide multicast filter fallback

commit 592d751c1e174df5ff219946908b005eb48934b3 upstream.

If we don't have a hardware multicast filter available then instead of
silently failing to listen for the requested ethernet broadcast
addresses fall back to receiving all multicast packets, in a similar
fashion to other drivers with no multicast filter.

Cc: stable@vger.kernel.org
Signed-off-by: Jonathan McDowell <noodles@earth.li>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: ethernet: stmmac: Disable hardware multicast filter

commit df43dd526e6609769ae513a81443c7aa727c8ca3 upstream.

The IPQ806x does not appear to have a functional multicast ethernet
address filter. This was observed as a failure to correctly receive IPv6
packets on a LAN to the all stations address. Checking the vendor driver
shows that it does not attempt to enable the multicast filter and
instead falls back to receiving all multicast packets, internally
setting ALLMULTI.

Use the new fallback support in the dwmac1000 driver to correctly
achieve the same with the mainline IPQ806x driver. Confirmed to fix IPv6
functionality on an RB3011 router.

Cc: stable@vger.kernel.org
Signed-off-by: Jonathan McDowell <noodles@earth.li>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: vsp1: dl: Fix NULL pointer dereference on unbind

commit c92d30e4b78dc331909f8c6056c2792aa14e2166 upstream.

In commit f3b98e3c4d2e16 ("media: vsp1: Provide support for extended
command pools"), the vsp pointer used for referencing the VSP1 device
structure from a command pool during vsp1_dl_ext_cmd_pool_destroy() was
not populated.

Correctly assign the pointer to prevent the following
null-pointer-dereference when removing the device:

[*] h3ulcb-kf #>
echo fea28000.vsp > /sys/bus/platform/devices/fea28000.vsp/driver/unbind
 Unable to handle kernel NULL pointer dereference at virtual address 0000000000000028
 Mem abort info:
   ESR = 0x96000006
   EC = 0x25: DABT (current EL), IL = 32 bits
   SET = 0, FnV = 0
   EA = 0, S1PTW = 0
 Data abort info:
   ISV = 0, ISS = 0x00000006
   CM = 0, WnR = 0
 user pgtable: 4k pages, 48-bit VAs, pgdp=00000007318be000
 [0000000000000028] pgd=00000007333a1003, pud=00000007333a6003, pmd=0000000000000000
 Internal error: Oops: 96000006 [#1] PREEMPT SMP
 Modules linked in:
 CPU: 1 PID: 486 Comm: sh Not tainted 5.7.0-rc6-arm64-renesas-00118-ge644645abf47 #185
 Hardware name: Renesas H3ULCB Kingfisher board based on r8a77951 (DT)
 pstate: 40000005 (nZcv daif -PAN -UAO)
 pc : vsp1_dlm_destroy+0xe4/0x11c
 lr : vsp1_dlm_destroy+0xc8/0x11c
 sp : ffff800012963b60
 x29: ffff800012963b60 x28: ffff0006f83fc440
 x27: 0000000000000000 x26: ffff0006f5e13e80
 x25: ffff0006f5e13ed0 x24: ffff0006f5e13ed0
 x23: ffff0006f5e13ed0 x22: dead000000000122
 x21: ffff0006f5e3a080 x20: ffff0006f5df2938
 x19: ffff0006f5df2980 x18: 0000000000000003
 x17: 0000000000000000 x16: 0000000000000016
 x15: 0000000000000003 x14: 00000000000393c0
 x13: ffff800011a5ec18 x12: ffff800011d8d000
 x11: ffff0006f83fcc68 x10: ffff800011a53d70
 x9 : ffff8000111f3000 x8 : 0000000000000000
 x7 : 0000000000210d00 x6 : 0000000000000000
 x5 : ffff800010872e60 x4 : 0000000000000004
 x3 : 0000000078068000 x2 : ffff800012781000
 x1 : 0000000000002c00 x0 : 0000000000000000
 Call trace:
  vsp1_dlm_destroy+0xe4/0x11c
  vsp1_wpf_destroy+0x10/0x20
  vsp1_entity_destroy+0x24/0x4c
  vsp1_destroy_entities+0x54/0x130
  vsp1_remove+0x1c/0x40
  platform_drv_remove+0x28/0x50
  __device_release_driver+0x178/0x220
  device_driver_detach+0x44/0xc0
  unbind_store+0xe0/0x104
  drv_attr_store+0x20/0x30
  sysfs_kf_write+0x48/0x70
  kernfs_fop_write+0x148/0x230
  __vfs_write+0x18/0x40
  vfs_write+0xdc/0x1c4
  ksys_write+0x68/0xf0
  __arm64_sys_write+0x18/0x20
  el0_svc_common.constprop.0+0x70/0x170
  do_el0_svc+0x20/0x80
  el0_sync_handler+0x134/0x1b0
  el0_sync+0x140/0x180
 Code: b40000c2 f9403a60 d2800084 a9400663 (f9401400)
 ---[ end trace 3875369841fb288a ]---

Fixes: f3b98e3c4d2e16 ("media: vsp1: Provide support for extended command pools")
Cc: stable@vger.kernel.org # v4.19+
Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Tested-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc: Fix circular dependency between percpu.h and mmu.h

commit 0c83b277ada72b585e6a3e52b067669df15bcedb upstream.

Recently random.h started including percpu.h (see commit
f227e3ec3b5c ("random32: update the net random state on interrupt and
activity")), which broke corenet64_smp_defconfig:

  In file included from /linux/arch/powerpc/include/asm/paca.h:18,
                   from /linux/arch/powerpc/include/asm/percpu.h:13,
                   from /linux/include/linux/random.h:14,
                   from /linux/lib/uuid.c:14:
  /linux/arch/powerpc/include/asm/mmu.h:139:22: error: unknown type name 'next_tlbcam_idx'
    139 | DECLARE_PER_CPU(int, next_tlbcam_idx);

This is due to a circular header dependency:
  asm/mmu.h includes asm/percpu.h, which includes asm/paca.h, which
  includes asm/mmu.h

Which means DECLARE_PER_CPU() isn't defined when mmu.h needs it.

We can fix it by moving the include of paca.h below the include of
asm-generic/percpu.h.

This moves the include of paca.h out of the #ifdef __powerpc64__, but
that is OK because paca.h is almost entirely inside #ifdef
CONFIG_PPC64 anyway.

It also moves the include of paca.h out of the #ifdef CONFIG_SMP,
which could possibly break something, but seems to have no ill
effects.

Fixes: f227e3ec3b5c ("random32: update the net random state on interrupt and activity")
Cc: stable@vger.kernel.org # v5.8
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200804130558.292328-1-mpe@ellerman.id.au
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc: Allow 4224 bytes of stack expansion for the signal frame

commit 63dee5df43a31f3844efabc58972f0a206ca4534 upstream.

We have powerpc specific logic in our page fault handling to decide if
an access to an unmapped address below the stack pointer should expand
the stack VMA.

The code was originally added in 2004 "ported from 2.4". The rough
logic is that the stack is allowed to grow to 1MB with no extra
checking. Over 1MB the access must be within 2048 bytes of the stack
pointer, or be from a user instruction that updates the stack pointer.

The 2048 byte allowance below the stack pointer is there to cover the
288 byte "red zone" as well as the "about 1.5kB" needed by the signal
delivery code.

Unfortunately since then the signal frame has expanded, and is now
4224 bytes on 64-bit kernels with transactional memory enabled. This
means if a process has consumed more than 1MB of stack, and its stack
pointer lies less than 4224 bytes from the next page boundary, signal
delivery will fault when trying to expand the stack and the process
will see a SEGV.

The total size of the signal frame is the size of struct rt_sigframe
(which includes the red zone) plus __SIGNAL_FRAMESIZE (128 bytes on
64-bit).

The 2048 byte allowance was correct until 2008 as the signal frame
was:

struct rt_sigframe {
        struct ucontext    uc;                           /*     0  1440 */
        /* --- cacheline 11 boundary (1408 bytes) was 32 bytes ago --- */
        long unsigned int          _unused[2];           /*  1440    16 */
        unsigned int               tramp[6];             /*  1456    24 */
        struct siginfo *           pinfo;                /*  1480     8 */
        void *                     puc;                  /*  1488     8 */
        struct siginfo     info;                         /*  1496   128 */
        /* --- cacheline 12 boundary (1536 bytes) was 88 bytes ago --- */
        char                       abigap[288];          /*  1624   288 */

        /* size: 1920, cachelines: 15, members: 7 */
        /* padding: 8 */
};

1920 + 128 = 2048

Then in commit ce48b2100785 ("powerpc: Add VSX context save/restore,
ptrace and signal support") (Jul 2008) the signal frame expanded to
2304 bytes:

struct rt_sigframe {
        struct ucontext    uc;                           /*     0  1696 */ <--
        /* --- cacheline 13 boundary (1664 bytes) was 32 bytes ago --- */
        long unsigned int          _unused[2];           /*  1696    16 */
        unsigned int               tramp[6];             /*  1712    24 */
        struct siginfo *           pinfo;                /*  1736     8 */
        void *                     puc;                  /*  1744     8 */
        struct siginfo     info;                         /*  1752   128 */
        /* --- cacheline 14 boundary (1792 bytes) was 88 bytes ago --- */
        char                       abigap[288];          /*  1880   288 */

        /* size: 2176, cachelines: 17, members: 7 */
        /* padding: 8 */
};

2176 + 128 = 2304

At this point we should have been exposed to the bug, though as far as
I know it was never reported. I no longer have a system old enough to
easily test on.

Then in 2010 commit 320b2b8de126 ("mm: keep a guard page below a
grow-down stack segment") caused our stack expansion code to never
trigger, as there was always a VMA found for a write up to PAGE_SIZE
below r1.

That meant the bug was hidden as we continued to expand the signal
frame in commit 2b0a576d15e0 ("powerpc: Add new transactional memory
state to the signal context") (Feb 2013):

struct rt_sigframe {
        struct ucontext    uc;                           /*     0  1696 */
        /* --- cacheline 13 boundary (1664 bytes) was 32 bytes ago --- */
        struct ucontext    uc_transact;                  /*  1696  1696 */ <--
        /* --- cacheline 26 boundary (3328 bytes) was 64 bytes ago --- */
        long unsigned int          _unused[2];           /*  3392    16 */
        unsigned int               tramp[6];             /*  3408    24 */
        struct siginfo *           pinfo;                /*  3432     8 */
        void *                     puc;                  /*  3440     8 */
        struct siginfo     info;                         /*  3448   128 */
        /* --- cacheline 27 boundary (3456 bytes) was 120 bytes ago --- */
        char                       abigap[288];          /*  3576   288 */

        /* size: 3872, cachelines: 31, members: 8 */
        /* padding: 8 */
        /* last cacheline: 32 bytes */
};

3872 + 128 = 4000

And commit 573ebfa6601f ("powerpc: Increase stack redzone for 64-bit
userspace to 512 bytes") (Feb 2014):

struct rt_sigframe {
        struct ucontext    uc;                           /*     0  1696 */
        /* --- cacheline 13 boundary (1664 bytes) was 32 bytes ago --- */
        struct ucontext    uc_transact;                  /*  1696  1696 */
        /* --- cacheline 26 boundary (3328 bytes) was 64 bytes ago --- */
        long unsigned int          _unused[2];           /*  3392    16 */
        unsigned int               tramp[6];             /*  3408    24 */
        struct siginfo *           pinfo;                /*  3432     8 */
        void *                     puc;                  /*  3440     8 */
        struct siginfo     info;                         /*  3448   128 */
        /* --- cacheline 27 boundary (3456 bytes) was 120 bytes ago --- */
        char                       abigap[512];          /*  3576   512 */ <--

        /* size: 4096, cachelines: 32, members: 8 */
        /* padding: 8 */
};

4096 + 128 = 4224

Then finally in 2017, commit 1be7107fbe18 ("mm: larger stack guard
gap, between vmas") exposed us to the existing bug, because it changed
the stack VMA to be the correct/real size, meaning our stack expansion
code is now triggered.

Fix it by increasing the allowance to 4224 bytes.

Hard-coding 4224 is obviously unsafe against future expansions of the
signal frame in the same way as the existing code. We can't easily use
sizeof() because the signal frame structure is not in a header. We
will either fix that, or rip out all the custom stack expansion
checking logic entirely.

Fixes: ce48b2100785 ("powerpc: Add VSX context save/restore, ptrace and signal support")
Cc: stable@vger.kernel.org # v2.6.27+
Reported-by: Tom Lane <tgl@sss.pgh.pa.us>
Tested-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200724092528.1578671-2-mpe@ellerman.id.au
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cifs: Fix leak when handling lease break for cached root fid

commit baf57b56d3604880ccb3956ec6c62ea894f5de99 upstream.

Handling a lease break for the cached root didn't free the
smb2_lease_break_work allocation, resulting in a leak:

    unreferenced object 0xffff98383a5af480 (size 128):
      comm "cifsd", pid 684, jiffies 4294936606 (age 534.868s)
      hex dump (first 32 bytes):
        c0 ff ff ff 1f 00 00 00 88 f4 5a 3a 38 98 ff ff  ..........Z:8...
        88 f4 5a 3a 38 98 ff ff 80 88 d6 8a ff ff ff ff  ..Z:8...........
      backtrace:
        [<0000000068957336>] smb2_is_valid_oplock_break+0x1fa/0x8c0
        [<0000000073b70b9e>] cifs_demultiplex_thread+0x73d/0xcc0
        [<00000000905fa372>] kthread+0x11c/0x150
        [<0000000079378e4e>] ret_from_fork+0x22/0x30

Avoid this leak by only allocating when necessary.

Fixes: a93864d93977 ("cifs: add lease tracking to the cached root fid")
Signed-off-by: Paul Aurich <paul@darkrain42.org>
CC: Stable <stable@vger.kernel.org> # v4.18+
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xtensa: fix xtensa_pmu_setup prototype

commit 6d65d3769d1910379e1cfa61ebf387efc6bfb22c upstream.

Fix the following build error in configurations with
CONFIG_XTENSA_VARIANT_HAVE_PERF_EVENTS=y:

  arch/xtensa/kernel/perf_event.c:420:29: error: passing argument 3 of
  ‘cpuhp_setup_state’ from incompatible pointer type

Cc: stable@vger.kernel.org
Fixes: 25a77b55e74c ("xtensa/perf: Convert the hotplug notifier to state machine callbacks")
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: dac: ad5592r: fix unbalanced mutex unlocks in ad5592r_read_raw()

commit 65afb0932a81c1de719ceee0db0b276094b10ac8 upstream.

There are 2 exit paths where the lock isn't held, but try to unlock the
mutex when exiting. In these places we should just return from the
function.

A neater approach would be to cleanup the ad5592r_read_raw(), but that
would make this patch more difficult to backport to stable versions.

Fixes 56ca9db862bf3: ("iio: dac: Add support for the AD5592R/AD5593R ADCs/DACs")
Reported-by: Charles Stanhope <charles.stanhope@gmail.com>
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dt-bindings: iio: io-channel-mux: Fix compatible string in example code

commit add48ba425192c6e04ce70549129cacd01e2a09e upstream.

The correct compatible string is "gpio-mux" (see
bindings/mux/gpio-mux.txt).

Cc: stable@vger.kernel.org # v4.13+
Reviewed-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Christian Eggers <ceggers@arri.de>
Link: https://lore.kernel.org/r/20200727101605.24384-1-ceggers@arri.de
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: fix return value mixup in btrfs_get_extent

commit 881a3a11c2b858fe9b69ef79ac5ee9978a266dc9 upstream.

btrfs_get_extent() sets variable ret, but out: error path expect error
to be in variable err so the error code is lost.

Fixes: 6bf9e4bd6a27 ("btrfs: inode: Verify inode mode to avoid NULL pointer dereference")
CC: stable@vger.kernel.org # 5.4+
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Pavel Machek (CIP) <pavel@denx.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: fix memory leaks after failure to lookup checksums during inode logging

commit 4f26433e9b3eb7a55ed70d8f882ae9cd48ba448b upstream.

While logging an inode, at copy_items(), if we fail to lookup the checksums
for an extent we release the destination path, free the ins_data array and
then return immediately. However a previous iteration of the for loop may
have added checksums to the ordered_sums list, in which case we leak the
memory used by them.

So fix this by making sure we iterate the ordered_sums list and free all
its checksums before returning.

Fixes: 3650860b90cc2a ("Btrfs: remove almost all of the BUG()'s from tree-log.c")
CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: only search for left_info if there is no right_info in try_merge_free_space

commit bf53d4687b8f3f6b752f091eb85f62369a515dfd upstream.

In try_to_merge_free_space we attempt to find entries to the left and
right of the entry we are adding to see if they can be merged.  We
search for an entry past our current info (saved into right_info), and
then if right_info exists and it has a rb_prev() we save the rb_prev()
into left_info.

However there's a slight problem in the case that we have a right_info,
but no entry previous to that entry.  At that point we will search for
an entry just before the info we're attempting to insert.  This will
simply find right_info again, and assign it to left_info, making them
both the same pointer.

Now if right_info _can_ be merged with the range we're inserting, we'll
add it to the info and free right_info.  However further down we'll
access left_info, which was right_info, and thus get a use-after-free.

Fix this by only searching for the left entry if we don't find a right
entry at all.

The CVE referenced had a specially crafted file system that could
trigger this use-after-free. However with the tree checker improvements
we no longer trigger the conditions for the UAF.  But the original
conditions still apply, hence this fix.

Reference: CVE-2019-19448
Fixes: 963030817060 ("Btrfs: use hybrid extents+bitmap rb tree for free space")
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: fix messages after changing compression level by remount

commit 27942c9971cc405c60432eca9395e514a2ae9f5e upstream.

Reported by Forza on IRC that remounting with compression options does
not reflect the change in level, or at least it does not appear to do so
according to the messages:

  mount -o compress=zstd:1 /dev/sda /mnt
  mount -o remount,compress=zstd:15 /mnt

does not print the change to the level to syslog:

  [   41.366060] BTRFS info (device vda): use zstd compression, level 1
  [   41.368254] BTRFS info (device vda): disk space caching is enabled
  [   41.390429] BTRFS info (device vda): disk space caching is enabled

What really happens is that the message is lost but the level is actualy
changed.

There's another weird output, if compression is reset to 'no':

  [   45.413776] BTRFS info (device vda): use no compression, level 4

To fix that, save the previous compression level and print the message
in that case too and use separate message for 'no' compression.

CC: stable@vger.kernel.org # 4.19+
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: open device without device_list_mutex

commit 18c850fdc5a801bad4977b0f1723761d42267e45 upstream.

There's long existed a lockdep splat because we open our bdev's under
the ->device_list_mutex at mount time, which acquires the bd_mutex.
Usually this goes unnoticed, but if you do loopback devices at all
suddenly the bd_mutex comes with a whole host of other dependencies,
which results in the splat when you mount a btrfs file system.

======================================================
WARNING: possible circular locking dependency detected
5.8.0-0.rc3.1.fc33.x86_64+debug #1 Not tainted
------------------------------------------------------
systemd-journal/509 is trying to acquire lock:
ffff970831f84db0 (&fs_info->reloc_mutex){+.+.}-{3:3}, at: btrfs_record_root_in_trans+0x44/0x70 [btrfs]

but task is already holding lock:
ffff97083144d598 (sb_pagefaults){.+.+}-{0:0}, at: btrfs_page_mkwrite+0x59/0x560 [btrfs]

which lock already depends on the new lock.

the existing dependency chain (in reverse order) is:

 -> #6 (sb_pagefaults){.+.+}-{0:0}:
       __sb_start_write+0x13e/0x220
       btrfs_page_mkwrite+0x59/0x560 [btrfs]
       do_page_mkwrite+0x4f/0x130
       do_wp_page+0x3b0/0x4f0
       handle_mm_fault+0xf47/0x1850
       do_user_addr_fault+0x1fc/0x4b0
       exc_page_fault+0x88/0x300
       asm_exc_page_fault+0x1e/0x30

 -> #5 (&mm->mmap_lock#2){++++}-{3:3}:
       __might_fault+0x60/0x80
       _copy_from_user+0x20/0xb0
       get_sg_io_hdr+0x9a/0xb0
       scsi_cmd_ioctl+0x1ea/0x2f0
       cdrom_ioctl+0x3c/0x12b4
       sr_block_ioctl+0xa4/0xd0
       block_ioctl+0x3f/0x50
       ksys_ioctl+0x82/0xc0
       __x64_sys_ioctl+0x16/0x20
       do_syscall_64+0x52/0xb0
       entry_SYSCALL_64_after_hwframe+0x44/0xa9

 -> #4 (&cd->lock){+.+.}-{3:3}:
       __mutex_lock+0x7b/0x820
       sr_block_open+0xa2/0x180
       __blkdev_get+0xdd/0x550
       blkdev_get+0x38/0x150
       do_dentry_open+0x16b/0x3e0
       path_openat+0x3c9/0xa00
       do_filp_open+0x75/0x100
       do_sys_openat2+0x8a/0x140
       __x64_sys_openat+0x46/0x70
       do_syscall_64+0x52/0xb0
       entry_SYSCALL_64_after_hwframe+0x44/0xa9

 -> #3 (&bdev->bd_mutex){+.+.}-{3:3}:
       __mutex_lock+0x7b/0x820
       __blkdev_get+0x6a/0x550
       blkdev_get+0x85/0x150
       blkdev_get_by_path+0x2c/0x70
       btrfs_get_bdev_and_sb+0x1b/0xb0 [btrfs]
       open_fs_devices+0x88/0x240 [btrfs]
       btrfs_open_devices+0x92/0xa0 [btrfs]
       btrfs_mount_root+0x250/0x490 [btrfs]
       legacy_get_tree+0x30/0x50
       vfs_get_tree+0x28/0xc0
       vfs_kern_mount.part.0+0x71/0xb0
       btrfs_mount+0x119/0x380 [btrfs]
       legacy_get_tree+0x30/0x50
       vfs_get_tree+0x28/0xc0
       do_mount+0x8c6/0xca0
       __x64_sys_mount+0x8e/0xd0
       do_syscall_64+0x52/0xb0
       entry_SYSCALL_64_after_hwframe+0x44/0xa9

 -> #2 (&fs_devs->device_list_mutex){+.+.}-{3:3}:
       __mutex_lock+0x7b/0x820
       btrfs_run_dev_stats+0x36/0x420 [btrfs]
       commit_cowonly_roots+0x91/0x2d0 [btrfs]
       btrfs_commit_transaction+0x4e6/0x9f0 [btrfs]
       btrfs_sync_file+0x38a/0x480 [btrfs]
       __x64_sys_fdatasync+0x47/0x80
       do_syscall_64+0x52/0xb0
       entry_SYSCALL_64_after_hwframe+0x44/0xa9

 -> #1 (&fs_info->tree_log_mutex){+.+.}-{3:3}:
       __mutex_lock+0x7b/0x820
       btrfs_commit_transaction+0x48e/0x9f0 [btrfs]
       btrfs_sync_file+0x38a/0x480 [btrfs]
       __x64_sys_fdatasync+0x47/0x80
       do_syscall_64+0x52/0xb0
       entry_SYSCALL_64_after_hwframe+0x44/0xa9

 -> #0 (&fs_info->reloc_mutex){+.+.}-{3:3}:
       __lock_acquire+0x1241/0x20c0
       lock_acquire+0xb0/0x400
       __mutex_lock+0x7b/0x820
       btrfs_record_root_in_trans+0x44/0x70 [btrfs]
       start_transaction+0xd2/0x500 [btrfs]
       btrfs_dirty_inode+0x44/0xd0 [btrfs]
       file_update_time+0xc6/0x120
       btrfs_page_mkwrite+0xda/0x560 [btrfs]
       do_page_mkwrite+0x4f/0x130
       do_wp_page+0x3b0/0x4f0
       handle_mm_fault+0xf47/0x1850
       do_user_addr_fault+0x1fc/0x4b0
       exc_page_fault+0x88/0x300
       asm_exc_page_fault+0x1e/0x30

other info that might help us debug this:

Chain exists of:
  &fs_info->reloc_mutex --> &mm->mmap_lock#2 --> sb_pagefaults

Possible unsafe locking scenario:

     CPU0                    CPU1
     ----                    ----
 lock(sb_pagefaults);
                             lock(&mm->mmap_lock#2);
                             lock(sb_pagefaults);
 lock(&fs_info->reloc_mutex);

 *** DEADLOCK ***

3 locks held by systemd-journal/509:
 #0: ffff97083bdec8b8 (&mm->mmap_lock#2){++++}-{3:3}, at: do_user_addr_fault+0x12e/0x4b0
 #1: ffff97083144d598 (sb_pagefaults){.+.+}-{0:0}, at: btrfs_page_mkwrite+0x59/0x560 [btrfs]
 #2: ffff97083144d6a8 (sb_internal){.+.+}-{0:0}, at: start_transaction+0x3f8/0x500 [btrfs]

stack backtrace:
CPU: 0 PID: 509 Comm: systemd-journal Not tainted 5.8.0-0.rc3.1.fc33.x86_64+debug #1
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
Call Trace:
 dump_stack+0x92/0xc8
 check_noncircular+0x134/0x150
 __lock_acquire+0x1241/0x20c0
 lock_acquire+0xb0/0x400
 ? btrfs_record_root_in_trans+0x44/0x70 [btrfs]
 ? lock_acquire+0xb0/0x400
 ? btrfs_record_root_in_trans+0x44/0x70 [btrfs]
 __mutex_lock+0x7b/0x820
 ? btrfs_record_root_in_trans+0x44/0x70 [btrfs]
 ? kvm_sched_clock_read+0x14/0x30
 ? sched_clock+0x5/0x10
 ? sched_clock_cpu+0xc/0xb0
 btrfs_record_root_in_trans+0x44/0x70 [btrfs]
 start_transaction+0xd2/0x500 [btrfs]
 btrfs_dirty_inode+0x44/0xd0 [btrfs]
 file_update_time+0xc6/0x120
 btrfs_page_mkwrite+0xda/0x560 [btrfs]
 ? sched_clock+0x5/0x10
 do_page_mkwrite+0x4f/0x130
 do_wp_page+0x3b0/0x4f0
 handle_mm_fault+0xf47/0x1850
 do_user_addr_fault+0x1fc/0x4b0
 exc_page_fault+0x88/0x300
 ? asm_exc_page_fault+0x8/0x30
 asm_exc_page_fault+0x1e/0x30
RIP: 0033:0x7fa3972fdbfe
Code: Bad RIP value.

Fix this by not holding the ->device_list_mutex at this point.  The
device_list_mutex exists to protect us from modifying the device list
while the file system is running.

However it can also be modified by doing a scan on a device.  But this
action is specifically protected by the uuid_mutex, which we are holding
here.  We cannot race with opening at this point because we have the
->s_mount lock held during the mount.  Not having the
->device_list_mutex here is perfectly safe as we're not going to change
the devices at this point.

CC: stable@vger.kernel.org # 4.19+
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ add some comments ]
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: don't traverse into the seed devices in show_devname

commit 4faf55b03823e96c44dc4e364520000ed3b12fdb upstream.

->show_devname currently shows the lowest devid in the list. As the seed
devices have the lowest devid in the sprouted filesystem, the userland
tool such as findmnt end up seeing seed device instead of the device from
the read-writable sprouted filesystem. As shown below.

 mount /dev/sda /btrfs
 mount: /btrfs: WARNING: device write-protected, mounted read-only.

 findmnt --output SOURCE,TARGET,UUID /btrfs
 SOURCE   TARGET UUID
 /dev/sda /btrfs 899f7027-3e46-4626-93e7-7d4c9ad19111

 btrfs dev add -f /dev/sdb /btrfs

 umount /btrfs
 mount /dev/sdb /btrfs

 findmnt --output SOURCE,TARGET,UUID /btrfs
 SOURCE   TARGET UUID
 /dev/sda /btrfs 899f7027-3e46-4626-93e7-7d4c9ad19111

All sprouts from a single seed will show the same seed device and the
same fsid. That's confusing.
This is causing problems in our prototype as there isn't any reference
to the sprout file-system(s) which is being used for actual read and
write.

This was added in the patch which implemented the show_devname in btrfs
commit 9c5085c14798 ("Btrfs: implement ->show_devname").
I tried to look for any particular reason that we need to show the seed
device, there isn't any.

So instead, do not traverse through the seed devices, just show the
lowest devid in the sprouted fsid.

After the patch:

 mount /dev/sda /btrfs
 mount: /btrfs: WARNING: device write-protected, mounted read-only.

 findmnt --output SOURCE,TARGET,UUID /btrfs
 SOURCE   TARGET UUID
 /dev/sda /btrfs 899f7027-3e46-4626-93e7-7d4c9ad19111

 btrfs dev add -f /dev/sdb /btrfs
 mount -o rw,remount /dev/sdb /btrfs

 findmnt --output SOURCE,TARGET,UUID /btrfs
 SOURCE   TARGET UUID
 /dev/sdb /btrfs 595ca0e6-b82e-46b5-b9e2-c72a6928be48

 mount /dev/sda /btrfs1
 mount: /btrfs1: WARNING: device write-protected, mounted read-only.

 btrfs dev add -f /dev/sdc /btrfs1

 findmnt --output SOURCE,TARGET,UUID /btrfs1
 SOURCE   TARGET  UUID
 /dev/sdc /btrfs1 ca1dbb7a-8446-4f95-853c-a20f3f82bdbb

 cat /proc/self/mounts | grep btrfs
 /dev/sdb /btrfs btrfs rw,relatime,noacl,space_cache,subvolid=5,subvol=/ 0 0
 /dev/sdc /btrfs1 btrfs ro,relatime,noacl,space_cache,subvolid=5,subvol=/ 0 0

Reported-by: Martin K. Petersen <martin.petersen@oracle.com>
CC: stable@vger.kernel.org # 4.19+
Tested-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: ref-verify: fix memory leak in add_block_entry

commit d60ba8de1164e1b42e296ff270c622a070ef8fe7 upstream.

clang static analysis flags this error

fs/btrfs/ref-verify.c:290:3: warning: Potential leak of memory pointed to by 're' [unix.Malloc]
                kfree(be);
                ^~~~~

The problem is in this block of code:

if (root_objectid) {
struct root_entry *exist_re;

exist_re = insert_root_entry(&exist->roots, re);
if (exist_re)
kfree(re);
}

There is no 'else' block freeing when root_objectid is 0. Add the
missing kfree to the else branch.

Fixes: fd708b81d972 ("Btrfs: add a extent ref verify tool")
CC: stable@vger.kernel.org # 4.19+
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: don't allocate anonymous block device for user invisible roots

commit 851fd730a743e072badaf67caf39883e32439431 upstream.

[BUG]
When a lot of subvolumes are created, there is a user report about
transaction aborted:

  BTRFS: Transaction aborted (error -24)
  WARNING: CPU: 17 PID: 17041 at fs/btrfs/transaction.c:1576 create_pending_snapshot+0xbc4/0xd10 [btrfs]
  RIP: 0010:create_pending_snapshot+0xbc4/0xd10 [btrfs]
  Call Trace:
   create_pending_snapshots+0x82/0xa0 [btrfs]
   btrfs_commit_transaction+0x275/0x8c0 [btrfs]
   btrfs_mksubvol+0x4b9/0x500 [btrfs]
   btrfs_ioctl_snap_create_transid+0x174/0x180 [btrfs]
   btrfs_ioctl_snap_create_v2+0x11c/0x180 [btrfs]
   btrfs_ioctl+0x11a4/0x2da0 [btrfs]
   do_vfs_ioctl+0xa9/0x640
   ksys_ioctl+0x67/0x90
   __x64_sys_ioctl+0x1a/0x20
   do_syscall_64+0x5a/0x110
   entry_SYSCALL_64_after_hwframe+0x44/0xa9
  ---[ end trace 33f2f83f3d5250e9 ]---
  BTRFS: error (device sda1) in create_pending_snapshot:1576: errno=-24 unknown
  BTRFS info (device sda1): forced readonly
  BTRFS warning (device sda1): Skipping commit of aborted transaction.
  BTRFS: error (device sda1) in cleanup_transaction:1831: errno=-24 unknown

[CAUSE]
The error is EMFILE (Too many files open) and comes from the anonymous
block device allocation. The ids are in a shared pool of size 1<<20.

The ids are assigned to live subvolumes, ie. the root structure exists
in memory (eg. after creation or after the root appears in some path).
The pool could be exhausted if the numbers are not reclaimed fast
enough, after subvolume deletion or if other system component uses the
anon block devices.

[WORKAROUND]
Since it's not possible to completely solve the problem, we can only
minimize the time the id is allocated to a subvolume root.

Firstly, we can reduce the use of anon_dev by trees that are not
subvolume roots, like data reloc tree.

This patch will do extra check on root objectid, to skip roots that
don't need anon_dev.  Currently it's only data reloc tree and orphan
roots.

Reported-by: Greed Rong <greedrong@gmail.com>
Link: https://lore.kernel.org/linux-btrfs/CA+UqX+NTrZ6boGnWHhSeZmEY5J76CTqmYjO2S+=tHJX7nb9DPw@mail.gmail.com/
CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: free anon block device right after subvolume deletion

commit 082b6c970f02fefd278c7833880cda29691a5f34 upstream.

[BUG]
When a lot of subvolumes are created, there is a user report about
transaction aborted caused by slow anonymous block device reclaim:

  BTRFS: Transaction aborted (error -24)
  WARNING: CPU: 17 PID: 17041 at fs/btrfs/transaction.c:1576 create_pending_snapshot+0xbc4/0xd10 [btrfs]
  RIP: 0010:create_pending_snapshot+0xbc4/0xd10 [btrfs]
  Call Trace:
   create_pending_snapshots+0x82/0xa0 [btrfs]
   btrfs_commit_transaction+0x275/0x8c0 [btrfs]
   btrfs_mksubvol+0x4b9/0x500 [btrfs]
   btrfs_ioctl_snap_create_transid+0x174/0x180 [btrfs]
   btrfs_ioctl_snap_create_v2+0x11c/0x180 [btrfs]
   btrfs_ioctl+0x11a4/0x2da0 [btrfs]
   do_vfs_ioctl+0xa9/0x640
   ksys_ioctl+0x67/0x90
   __x64_sys_ioctl+0x1a/0x20
   do_syscall_64+0x5a/0x110
   entry_SYSCALL_64_after_hwframe+0x44/0xa9
  ---[ end trace 33f2f83f3d5250e9 ]---
  BTRFS: error (device sda1) in create_pending_snapshot:1576: errno=-24 unknown
  BTRFS info (device sda1): forced readonly
  BTRFS warning (device sda1): Skipping commit of aborted transaction.
  BTRFS: error (device sda1) in cleanup_transaction:1831: errno=-24 unknown

[CAUSE]
The anonymous device pool is shared and its size is 1M. It's possible to
hit that limit if the subvolume deletion is not fast enough and the
subvolumes to be cleaned keep the ids allocated.

[WORKAROUND]
We can't avoid the anon device pool exhaustion but we can shorten the
time the id is attached to the subvolume root once the subvolume becomes
invisible to the user.

Reported-by: Greed Rong <greedrong@gmail.com>
Link: https://lore.kernel.org/linux-btrfs/CA+UqX+NTrZ6boGnWHhSeZmEY5J76CTqmYjO2S+=tHJX7nb9DPw@mail.gmail.com/
CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI: Probe bridge window attributes once at enumeration-time

commit 51c48b310183ab6ba5419edfc6a8de889cc04521 upstream.

pci_bridge_check_ranges() determines whether a bridge supports the optional
I/O and prefetchable memory windows and sets the flag bits in the bridge
resources.  This *could* be done once during enumeration except that the
resource allocation code completely clears the flag bits, e.g., in the
pci_assign_unassigned_bridge_resources() path.

The problem with pci_bridge_check_ranges() in the resource allocation path
is that we may allocate resources after devices have been claimed by
drivers, and pci_bridge_check_ranges() *changes* the window registers to
determine whether they're writable.  This may break concurrent accesses to
devices behind the bridge.

Add a new pci_read_bridge_windows() to determine whether a bridge supports
the optional windows, call it once during enumeration, remember the
results, and change pci_bridge_check_ranges() so it doesn't touch the
bridge windows but sets the flag bits based on those remembered results.

Link: https://lore.kernel.org/linux-pci/1506151482-113560-1-git-send-email-wangzhou1@hisilicon.com
Link: https://lists.gnu.org/archive/html/qemu-devel/2018-12/msg02082.html
Reported-by: Yandong Xu <xuyandong2@huawei.com>
Tested-by: Yandong Xu <xuyandong2@huawei.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Ofer Hayut <ofer@lightbitslabs.com>
Cc: Roy Shterman <roys@lightbitslabs.com>
Cc: Keith Busch <keith.busch@intel.com>
Cc: Zhou Wang <wangzhou1@hisilicon.com>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=208371
Signed-off-by: Dima Stepanov <dimastep@yandex-team.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI: qcom: Add support for tx term offset for rev 2.1.0

commit de3c4bf648975ea0b1d344d811e9b0748907b47c upstream.

Add tx term offset support to pcie qcom driver need in some revision of
the ipq806x SoC. Ipq8064 needs tx term offset set to 7.

Link: https://lore.kernel.org/r/20200615210608.21469-9-ansuelsmth@gmail.com
Fixes: 82a823833f4e ("PCI: qcom: Add Qualcomm PCIe controller driver")
Signed-off-by: Sham Muthayyan <smuthayy@codeaurora.org>
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>
Cc: stable@vger.kernel.org # v4.5+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI: qcom: Define some PARF params needed for ipq8064 SoC

commit 5149901e9e6deca487c01cc434a3ac4125c7b00b upstream.

Set some specific value for Tx De-Emphasis, Tx Swing and Rx equalization
needed on some ipq8064 based device (Netgear R7800 for example). Without
this the system locks on kernel load.

Link: https://lore.kernel.org/r/20200615210608.21469-8-ansuelsmth@gmail.com
Fixes: 82a823833f4e ("PCI: qcom: Add Qualcomm PCIe controller driver")
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>
Cc: stable@vger.kernel.org # v4.5+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI: Add device even if driver attach failed

commit 2194bc7c39610be7cabe7456c5f63a570604f015 upstream.

device_attach() returning failure indicates a driver error while trying to
probe the device. In such a scenario, the PCI device should still be added
in the system and be visible to the user.

When device_attach() fails, merely warn about it and keep the PCI device in
the system.

This partially reverts ab1a187bba5c ("PCI: Check device_attach() return
value always").

Link: https://lore.kernel.org/r/20200706233240.3245512-1-rajatja@google.com
Signed-off-by: Rajat Jain <rajatja@google.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: stable@vger.kernel.org # v4.6+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI: Mark AMD Navi10 GPU rev 0x00 ATS as broken

commit 45beb31d3afb651bb5c41897e46bd4fa9980c51c upstream.

We are seeing AMD Radeon Pro W5700 doesn't work when IOMMU is enabled:

  iommu ivhd0: AMD-Vi: Event logged [IOTLB_INV_TIMEOUT device=63:00.0 address=0x42b5b01a0]
  iommu ivhd0: AMD-Vi: Event logged [IOTLB_INV_TIMEOUT device=63:00.0 address=0x42b5b01c0]

The error also makes graphics driver fail to probe the device.

It appears to be the same issue as commit 5e89cd303e3a ("PCI: Mark AMD
Navi14 GPU rev 0xc5 ATS as broken") addresses, and indeed the same ATS
quirk can workaround the issue.

See-also: 5e89cd303e3a ("PCI: Mark AMD Navi14 GPU rev 0xc5 ATS as broken")
See-also: d28ca864c493 ("PCI: Mark AMD Stoney Radeon R7 GPU ATS as broken")
See-also: 9b44b0b09dec ("PCI: Mark AMD Stoney GPU ATS as broken")
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=208725
Link: https://lore.kernel.org/r/20200728104554.28927-1-kai.heng.feng@canonical.com
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI: hotplug: ACPI: Fix context refcounting in acpiphp_grab_context()

commit dae68d7fd4930315389117e9da35b763f12238f9 upstream.

If context is not NULL in acpiphp_grab_context(), but the
is_going_away flag is set for the device's parent, the reference
counter of the context needs to be decremented before returning
NULL or the context will never be freed, so make that happen.

Fixes: edf5bf34d408 ("ACPI / dock: Use callback pointers from devices' ACPI hotplug contexts")
Reported-by: Vasily Averin <vvs@virtuozzo.com>
Cc: 3.15+ <stable@vger.kernel.org> # 3.15+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

genirq/affinity: Make affinity setting if activated opt-in

commit f0c7baca180046824e07fc5f1326e83a8fd150c7 upstream.

John reported that on a RK3288 system the perf per CPU interrupts are all
affine to CPU0 and provided the analysis:

 "It looks like what happens is that because the interrupts are not per-CPU
  in the hardware, armpmu_request_irq() calls irq_force_affinity() while
  the interrupt is deactivated and then request_irq() with IRQF_PERCPU |
  IRQF_NOBALANCING.

  Now when irq_startup() runs with IRQ_STARTUP_NORMAL, it calls
  irq_setup_affinity() which returns early because IRQF_PERCPU and
  IRQF_NOBALANCING are set, leaving the interrupt on its original CPU."

This was broken by the recent commit which blocked interrupt affinity
setting in hardware before activation of the interrupt. While this works in
general, it does not work for this particular case. As contrary to the
initial analysis not all interrupt chip drivers implement an activate
callback, the safe cure is to make the deferred interrupt affinity setting
at activation time opt-in.

Implement the necessary core logic and make the two irqchip implementations
for which this is required opt-in. In hindsight this would have been the
right thing to do, but ...

Fixes: baedb87d1b53 ("genirq/affinity: Handle affinity setting on inactive interrupts correctly")
Reported-by: John Keeping <john@metanate.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Marc Zyngier <maz@kernel.org>
Acked-by: Marc Zyngier <maz@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/87blk4tzgm.fsf@nanos.tec.linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

smb3: warn on confusing error scenario with sec=krb5

commit 0a018944eee913962bce8ffebbb121960d5125d9 upstream.

When mounting with Kerberos, users have been confused about the
default error returned in scenarios in which either keyutils is
not installed or the user did not properly acquire a krb5 ticket.
Log a warning message in the case that "ENOKEY" is returned
from the get_spnego_key upcall so that users can better understand
why mount failed in those two cases.

CC: Stable <stable@vger.kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 4.19.140

Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xen/gntdev: Fix dmabuf import with non-zero sgt offset

commit 5fa4e6f1c2d8c9a4e47e1931b42893172d388f2b upstream.

It is possible that the scatter-gather table during dmabuf import has
non-zero offset of the data, but user-space doesn't expect that.
Fix this by failing the import, so user-space doesn't access wrong data.

Fixes: bf8dc55b1358 ("xen/gntdev: Implement dma-buf import functionality")
Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Acked-by: Juergen Gross <jgross@suse.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200813062113.11030-2-andr2000@gmail.com
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xen/balloon: make the balloon wait interruptible

commit 88a479ff6ef8af7f07e11593d58befc644244ff7 upstream.

So it can be killed, or else processes can get hung indefinitely
waiting for balloon pages.

Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200727091342.52325-3-roger.pau@citrix.com
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xen/balloon: fix accounting in alloc_xenballooned_pages error path

commit 1951fa33ec259abdf3497bfee7b63e7ddbb1a394 upstream.

target_unpopulated is incremented with nr_pages at the start of the
function, but the call to free_xenballooned_pages will only subtract
pgno number of pages, and thus the rest need to be subtracted before
returning or else accounting will be skewed.

Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200727091342.52325-2-roger.pau@citrix.com
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

irqdomain/treewide: Free firmware node after domain removal

commit ec0160891e387f4771f953b888b1fe951398e5d9 upstream.

Commit 711419e504eb ("irqdomain: Add the missing assignment of
domain->fwnode for named fwnode") unintentionally caused a dangling pointer
page fault issue on firmware nodes that were freed after IRQ domain
allocation. Commit e3beca48a45b fixed that dangling pointer issue by only
freeing the firmware node after an IRQ domain allocation failure. That fix
no longer frees the firmware node immediately, but leaves the firmware node
allocated after the domain is removed.

The firmware node must be kept around through irq_domain_remove, but should be
freed it afterwards.

Add the missing free operations after domain removal where where appropriate.

Fixes: e3beca48a45b ("irqdomain/treewide: Keep firmware node unconditionally allocated")
Signed-off-by: Jon Derrick <jonathan.derrick@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com> # drivers/pci
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/1595363169-7157-1-git-send-email-jonathan.derrick@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: 8992/1: Fix unwind_frame for clang-built kernels

commit b4d5ec9b39f8b31d98f65bc5577b5d15d93795d7 upstream.

Since clang does not push pc and sp in function prologues, the current
implementation of unwind_frame does not work. By using the previous
frame's lr/fp instead of saved pc/sp we get valid unwinds on clang-built
kernels.

The bounds check on next frame pointer must be changed as well since
there are 8 less bytes between frames.

This fixes /proc/<pid>/stack.

Link: https://github.com/ClangBuiltLinux/linux/issues/912
Reported-by: Miles Chen <miles.chen@mediatek.com>
Tested-by: Miles Chen <miles.chen@mediatek.com>
Cc: stable@vger.kernel.org
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Nathan Huckleberry <nhuck@google.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

parisc: mask out enable and reserved bits from sba imask

commit 5b24993c21cbf2de11aff077a48c5cb0505a0450 upstream.

When using kexec the SBA IOMMU IBASE might still have the RE
bit set. This triggers a WARN_ON when trying to write back the
IBASE register later, and it also makes some mask calculations fail.

Cc: <stable@vger.kernel.org>
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

parisc: Implement __smp_store_release and __smp_load_acquire barriers

commit e96ebd589debd9a6a793608c4ec7019c38785dea upstream.

This patch implements the __smp_store_release and __smp_load_acquire barriers
using ordered stores and loads.  This avoids the sync instruction present in
the generic implementation.

Cc: <stable@vger.kernel.org> # 4.14+
Signed-off-by: Dave Anglin <dave.anglin@bell.net>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mtd: rawnand: qcom: avoid write to unavailable register

commit 443440cc4a901af462239d286cd10721aa1c7dfc upstream.

SFLASHC_BURST_CFG is only available on older ipq NAND platforms, this
register has been removed when the NAND controller got implemented in
the qpic controller.

Avoid writing this register on devices which are based on qpic NAND
controller.

Fixes: dce84760b09f ("mtd: nand: qcom: Support for IPQ8074 QPIC NAND controller")
Cc: stable@vger.kernel.org
Signed-off-by: Sivaprakash Murugesan <sivaprak@codeaurora.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/1591948696-16015-2-git-send-email-sivaprak@codeaurora.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

spi: spidev: Align buffers for DMA

commit aa9e862d7d5bcecd4dca9f39e8b684b93dd84ee7 upstream.

Simply copying all xfers from userspace into one bounce buffer causes
alignment problems if the SPI controller uses DMA.

Ensure that all transfer data blocks within the rx and tx bounce buffers
are aligned for DMA (according to ARCH_KMALLOC_MINALIGN).

Alignment may increase the usage of the bounce buffers. In some cases,
the buffers may need to be increased using the "bufsiz" module
parameter.

Signed-off-by: Christian Eggers <ceggers@arri.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200728100832.24788-1-ceggers@arri.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

include/asm-generic/vmlinux.lds.h: align ro_after_init

commit 7f897acbe5d57995438c831670b7c400e9c0dc00 upstream.

Since the patch [1], building the kernel using a toolchain built with
binutils 2.33.1 prevents booting a sh4 system under Qemu.  Apply the patch
provided by Alan Modra [2] that fix alignment of rodata.

[1] https://sourceware.org/git/gitweb.cgi?p=binutils-gdb.git;h=ebd2263ba9a9124d93bbc0ece63d7e0fae89b40e
[2] https://www.sourceware.org/ml/binutils/2019-12/msg00112.html

Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Alan Modra <amodra@gmail.com>
Cc: Bin Meng <bin.meng@windriver.com>
Cc: Chen Zhou <chenzhou10@huawei.com>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Cc: Rich Felker <dalias@libc.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: <stable@vger.kernel.org>
Link: https://marc.info/?l=linux-sh&m=158429470221261
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cpufreq: dt: fix oops on armada37xx

commit 10470dec3decaf5ed3c596f85debd7c42777ae12 upstream.

Commit 0c868627e617e43a295d8 (cpufreq: dt: Allow platform specific
intermediate callbacks) added two function pointers to the
struct cpufreq_dt_platform_data. However, armada37xx_cpufreq_driver_init()
has this struct (pdata) located on the stack and uses only "suspend"
and "resume" fields. So these newly added "get_intermediate" and
"target_intermediate" pointers are uninitialized and contain arbitrary
non-null values, causing all kinds of trouble.

For instance, here is an oops on espressobin after an attempt to change
the cpefreq governor:

[   29.174554] Unable to handle kernel execute from non-executable memory at virtual address ffff00003f87bdc0
...
[   29.269373] pc : 0xffff00003f87bdc0
[   29.272957] lr : __cpufreq_driver_target+0x138/0x580
...

Fixed by zeroing out pdata before use.

Cc: <stable@vger.kernel.org> # v5.7+
Signed-off-by: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

NFS: Don't return layout segments that are in use

commit d474f96104bd4377573526ebae2ee212205a6839 upstream.

If the NFS_LAYOUT_RETURN_REQUESTED flag is set, we want to return the
layout as soon as possible, meaning that the affected layout segments
should be marked as invalid, and should no longer be in use for I/O.

Fixes: f0b429819b5f ("pNFS: Ignore non-recalled layouts in pnfs_layout_need_return()")
Cc: stable@vger.kernel.org # v4.19+
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

NFS: Don't move layouts to plh_return_segs list while in use

commit ff041727e9e029845857cac41aae118ead5e261b upstream.

If the layout segment is still in use for a read or a write, we should
not move it to the layout plh_return_segs list. If we do, we can end
up returning the layout while I/O is still in progress.

Fixes: e0b7d420f72a ("pNFS: Don't discard layout segments that are marked for return")
Cc: stable@vger.kernel.org # v4.19+
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/ttm/nouveau: don't call tt destroy callback on alloc failure.

commit 5de5b6ecf97a021f29403aa272cb4e03318ef586 upstream.

This is confusing, and from my reading of all the drivers only
nouveau got this right.

Just make the API act under driver control of it's own allocation
failing, and don't call destroy, if the page table fails to
create there is nothing to cleanup here.

(I'm willing to believe I've missed something here, so please
review deeply).

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200728041736.20689-1-airlied@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

9p: Fix memory leak in v9fs_mount

commit cb0aae0e31c632c407a2cab4307be85a001d4d98 upstream.

v9fs_mount
  v9fs_session_init
    v9fs_cache_session_get_cookie
      v9fs_random_cachetag                     -->alloc cachetag
      v9ses->fscache = fscache_acquire_cookie  -->maybe NULL
  sb = sget                                    -->fail, goto clunk
clunk_fid:
  v9fs_session_close
    if (v9ses->fscache)                        -->NULL
      kfree(v9ses->cachetag)

Thus memleak happens.

Link: http://lkml.kernel.org/r/20200615012153.89538-1-zhengbin13@huawei.com
Fixes: 60e78d2c993e ("9p: Add fscache support to 9p")
Cc: <stable@vger.kernel.org> # v2.6.32+
Signed-off-by: Zheng Bin <zhengbin13@huawei.com>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: usb-audio: add quirk for Pioneer DDJ-RB

commit 6e8596172ee1cd46ec0bfd5adcf4ff86371478b6 upstream.

This is just another Pioneer device with fixed endpoints. Input is dummy
but used as feedback (it always returns silence).

Cc: stable@vger.kernel.org
Signed-off-by: Hector Martin <marcan@marcan.st>
Link: https://lore.kernel.org/r/20200810082502.225979-1-marcan@marcan.st
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fs/minix: reject too-large maximum file size

commit 270ef41094e9fa95273f288d7d785313ceab2ff3 upstream.

If the minix filesystem tries to map a very large logical block number to
its on-disk location, block_to_path() can return offsets that are too
large, causing out-of-bounds memory accesses when accessing indirect index
blocks.  This should be prevented by the check against the maximum file
size, but this doesn't work because the maximum file size is read directly
from the on-disk superblock and isn't validated itself.

Fix this by validating the maximum file size at mount time.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: syzbot+c7d9ec7a1a7272dd71b3@syzkaller.appspotmail.com
Reported-by: syzbot+3b7b03a0c28948054fb5@syzkaller.appspotmail.com
Reported-by: syzbot+6e056ee473568865f3e6@syzkaller.appspotmail.com
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Qiujun Huang <anenbupt@gmail.com>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/20200628060846.682158-4-ebiggers@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fs/minix: don't allow getting deleted inodes

commit facb03dddec04e4aac1bb2139accdceb04deb1f3 upstream.

If an inode has no links, we need to mark it bad rather than allowing it
to be accessed.  This avoids WARNINGs in inc_nlink() and drop_nlink() when
doing directory operations on a fuzzed filesystem.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: syzbot+a9ac3de1b5de5fb10efc@syzkaller.appspotmail.com
Reported-by: syzbot+df958cf5688a96ad3287@syzkaller.appspotmail.com
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Qiujun Huang <anenbupt@gmail.com>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/20200628060846.682158-3-ebiggers@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fs/minix: check return value of sb_getblk()

commit da27e0a0e5f655f0d58d4e153c3182bb2b290f64 upstream.

Patch series "fs/minix: fix syzbot bugs and set s_maxbytes".

This series fixes all syzbot bugs in the minix filesystem:

KASAN: null-ptr-deref Write in get_block
KASAN: use-after-free Write in get_block
KASAN: use-after-free Read in get_block
WARNING in inc_nlink
KMSAN: uninit-value in get_block
WARNING in drop_nlink

It also fixes the minix filesystem to set s_maxbytes correctly, so that
userspace sees the correct behavior when exceeding the max file size.

This patch (of 6):

sb_getblk() can fail, so check its return value.

This fixes a NULL pointer dereference.

Originally from Qiujun Huang.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: syzbot+4a88b2b9dc280f47baf4@syzkaller.appspotmail.com
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Qiujun Huang <anenbupt@gmail.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/20200628060846.682158-1-ebiggers@kernel.org
Link: http://lkml.kernel.org/r/20200628060846.682158-2-ebiggers@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bitfield.h: don't compile-time validate _val in FIELD_FIT

commit 444da3f52407d74c9aa12187ac6b01f76ee47d62 upstream.

When ur_load_imm_any() is inlined into jeq_imm(), it's possible for the
compiler to deduce a case where _val can only have the value of -1 at
compile time. Specifically,

/* struct bpf_insn: _s32 imm */
u64 imm = insn->imm; /* sign extend */
if (imm >> 32) { /* non-zero only if insn->imm is negative */
  /* inlined from ur_load_imm_any */
  u32 __imm = imm >> 32; /* therefore, always 0xffffffff */
  if (__builtin_constant_p(__imm) && __imm > 255)
    compiletime_assert_XXX()

This can result in tripping a BUILD_BUG_ON() in __BF_FIELD_CHECK() that
checks that a given value is representable in one byte (interpreted as
unsigned).

FIELD_FIT() should return true or false at runtime for whether a value
can fit for not. Don't break the build over a value that's too large for
the mask. We'd prefer to keep the inlining and compiler optimizations
though we know this case will always return false.

Cc: stable@vger.kernel.org
Fixes: 1697599ee301a ("bitfield.h: add FIELD_FIT() helper")
Link: https://lore.kernel.org/kernel-hardening/CAK7LNASvb0UDJ0U5wkYYRzTAdnEs64HjXpEUL7d=V0CXiAXcNw@mail.gmail.com/
Reported-by: Masahiro Yamada <masahiroy@kernel.org>
Debugged-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>