Uwe Kleine-König [Thu, 1 Jul 2021 08:27:51 +0000 (10:27 +0200)]
pwm: sprd: Ensure configuring period and duty_cycle isn't wrongly skipped
[ Upstream commit
65e2e6c1c20104ed19060a38f4edbf14e9f9a9a5 ]
As the last call to sprd_pwm_apply() might have exited early if
state->enabled was false, the values for period and duty_cycle stored in
pwm->state might not have been written to hardware and it must be
ensured that they are configured before enabling the PWM.
Fixes: 8aae4b02e8a6 ("pwm: sprd: Add Spreadtrum PWM support")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Hangbin Liu [Wed, 7 Jul 2021 08:15:30 +0000 (16:15 +0800)]
selftests: icmp_redirect: IPv6 PMTU info should be cleared after redirect
[ Upstream commit
0e02bf5de46ae30074a2e1a8194a422a84482a1a ]
After redirecting, it's already a new path. So the old PMTU info should
be cleared. The IPv6 test "mtu exception plus redirect" should only
has redirect info without old PMTU.
The IPv4 test can not be changed because of legacy.
Fixes: ec8105352869 ("selftests: Add redirect tests")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Hangbin Liu [Wed, 7 Jul 2021 08:15:29 +0000 (16:15 +0800)]
selftests: icmp_redirect: remove from checking for IPv6 route get
[ Upstream commit
24b671aad4eae423e1abf5b7f08d9a5235458b8d ]
If the kernel doesn't enable option CONFIG_IPV6_SUBTREES, the RTA_SRC
info will not be exported to userspace in rt6_fill_node(). And ip cmd will
not print "from ::" to the route output. So remove this check.
Fixes: ec8105352869 ("selftests: Add redirect tests")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Nicolas Dichtel [Tue, 6 Jul 2021 09:13:35 +0000 (11:13 +0200)]
ipv6: fix 'disable_policy' for fwd packets
[ Upstream commit
ccd27f05ae7b8ebc40af5b004e94517a919aa862 ]
The goal of commit
df789fe75206 ("ipv6: Provide ipv6 version of
"disable_policy" sysctl") was to have the disable_policy from ipv4
available on ipv6.
However, it's not exactly the same mechanism. On IPv4, all packets coming
from an interface, which has disable_policy set, bypass the policy check.
For ipv6, this is done only for local packets, ie for packets destinated to
an address configured on the incoming interface.
Let's align ipv6 with ipv4 so that the 'disable_policy' sysctl has the same
effect for both protocols.
My first approach was to create a new kind of route cache entries, to be
able to set DST_NOPOLICY without modifying routes. This would have added a
lot of code. Because the local delivery path is already handled, I choose
to focus on the forwarding path to minimize code churn.
Fixes: df789fe75206 ("ipv6: Provide ipv6 version of "disable_policy" sysctl")
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Christophe JAILLET [Thu, 1 Jul 2021 20:18:24 +0000 (22:18 +0200)]
gve: Fix an error handling path in 'gve_probe()'
[ Upstream commit
2342ae10d1272d411a468a85a67647dd115b344f ]
If the 'register_netdev() call fails, we must release the resources
allocated by the previous 'gve_init_priv()' call, as already done in the
remove function.
Add a new label and the missing 'gve_teardown_priv_resources()' in the
error handling path.
Fixes: 893ce44df565 ("gve: Add basic driver framework for Compute Engine Virtual NIC")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Catherine Sullivan <csully@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jedrzej Jagielski [Fri, 11 Jun 2021 22:42:17 +0000 (22:42 +0000)]
igb: Fix position of assignment to *ring
[ Upstream commit
382a7c20d9253bcd5715789b8179528d0f3de72c ]
Assignment to *ring should be done after correctness check of the
argument queue.
Fixes: 91db364236c8 ("igb: Refactor igb_configure_cbs()")
Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Aleksandr Loktionov [Thu, 22 Apr 2021 10:19:23 +0000 (10:19 +0000)]
igb: Check if num of q_vectors is smaller than max before array access
[ Upstream commit
6c19d772618fea40d9681f259368f284a330fd90 ]
Ensure that the adapter->q_vector[MAX_Q_VECTORS] array isn't accessed
beyond its size. It was fixed by using a local variable num_q_vectors
as a limit for loop index, and ensure that num_q_vectors is not bigger
than MAX_Q_VECTORS.
Fixes: 047e0030f1e6 ("igb: add new data structure for handling interrupts and NAPI")
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Grzegorz Siwik <grzegorz.siwik@intel.com>
Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Reviewed-by: Slawomir Laba <slawomirx.laba@intel.com>
Reviewed-by: Sylwester Dziedziuch <sylwesterx.dziedziuch@intel.com>
Reviewed-by: Mateusz Palczewski <mateusz.placzewski@intel.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Christophe JAILLET [Wed, 16 Jun 2021 05:53:02 +0000 (07:53 +0200)]
iavf: Fix an error handling path in 'iavf_probe()'
[ Upstream commit
af30cbd2f4d6d66a9b6094e0aa32420bc8b20e08 ]
If an error occurs after a 'pci_enable_pcie_error_reporting()' call, it
must be undone by a corresponding 'pci_disable_pcie_error_reporting()'
call, as already done in the remove function.
Fixes: 5eae00c57f5e ("i40evf: main driver core")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Christophe JAILLET [Wed, 16 Jun 2021 05:05:53 +0000 (07:05 +0200)]
e1000e: Fix an error handling path in 'e1000_probe()'
[ Upstream commit
4589075608420bc49fcef6e98279324bf2bb91ae ]
If an error occurs after a 'pci_enable_pcie_error_reporting()' call, it
must be undone by a corresponding 'pci_disable_pcie_error_reporting()'
call, as already done in the remove function.
Fixes: 111b9dc5c981 ("e1000e: add aer support")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Christophe JAILLET [Wed, 16 Jun 2021 05:00:36 +0000 (07:00 +0200)]
fm10k: Fix an error handling path in 'fm10k_probe()'
[ Upstream commit
e85e14d68f517ef12a5fb8123fff65526b35b6cd ]
If an error occurs after a 'pci_enable_pcie_error_reporting()' call, it
must be undone by a corresponding 'pci_disable_pcie_error_reporting()'
call, as already done in the remove function.
Fixes: 19ae1b3fb99c ("fm10k: Add support for PCI power management and error handling")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Christophe JAILLET [Sat, 12 Jun 2021 20:08:33 +0000 (22:08 +0200)]
igb: Fix an error handling path in 'igb_probe()'
[ Upstream commit
fea03b1cebd653cd095f2e9a58cfe1c85661c363 ]
If an error occurs after a 'pci_enable_pcie_error_reporting()' call, it
must be undone by a corresponding 'pci_disable_pcie_error_reporting()'
call, as already done in the remove function.
Fixes: 40a914fa72ab ("igb: Add support for pci-e Advanced Error Reporting")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Christophe JAILLET [Sat, 12 Jun 2021 20:00:05 +0000 (22:00 +0200)]
igc: Fix an error handling path in 'igc_probe()'
[ Upstream commit
c6bc9e5ce5d37cb3e6b552f41b92a193db1806ab ]
If an error occurs after a 'pci_enable_pcie_error_reporting()' call, it
must be undone by a corresponding 'pci_disable_pcie_error_reporting()'
call, as already done in the remove function.
Fixes: c9a11c23ceb6 ("igc: Add netdev")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com>
Acked-by: Sasha Neftin <sasha.neftin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sasha Neftin [Sun, 10 Nov 2019 14:05:20 +0000 (16:05 +0200)]
igc: Prefer to use the pci_release_mem_regions method
[ Upstream commit
faf4dd52e9e34a36254a6ad43369064b6928d504 ]
Use the pci_release_mem_regions method instead of the
pci_release_selected_regions method
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Christophe JAILLET [Sat, 12 Jun 2021 13:46:09 +0000 (15:46 +0200)]
ixgbe: Fix an error handling path in 'ixgbe_probe()'
[ Upstream commit
dd2aefcd5e37989ae5f90afdae44bbbf3a2990da ]
If an error occurs after a 'pci_enable_pcie_error_reporting()' call, it
must be undone by a corresponding 'pci_disable_pcie_error_reporting()'
call, as already done in the remove function.
Fixes: 6fabd715e6d8 ("ixgbe: Implement PCIe AER support")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Tom Rix [Fri, 21 May 2021 19:50:19 +0000 (12:50 -0700)]
igc: change default return of igc_read_phy_reg()
[ Upstream commit
05682a0a61b6cbecd97a0f37f743b2cbfd516977 ]
Static analysis reports this problem
igc_main.c:4944:20: warning: The left operand of '&'
is a garbage value
if (!(phy_data & SR_1000T_REMOTE_RX_STATUS) &&
~~~~~~~~ ^
phy_data is set by the call to igc_read_phy_reg() only if
there is a read_reg() op, else it is unset and a 0 is
returned. Change the return to -EOPNOTSUPP.
Fixes: 208983f099d9 ("igc: Add watchdog")
Signed-off-by: Tom Rix <trix@redhat.com>
Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Vinicius Costa Gomes [Fri, 14 May 2021 00:31:04 +0000 (17:31 -0700)]
igb: Fix use-after-free error during reset
[ Upstream commit
7b292608db23ccbbfbfa50cdb155d01725d7a52e ]
Cleans the next descriptor to watch (next_to_watch) when cleaning the
TX ring.
Failure to do so can cause invalid memory accesses. If igb_poll() runs
while the controller is reset this can lead to the driver try to free
a skb that was already freed.
(The crash is harder to reproduce with the igb driver, but the same
potential problem exists as the code is identical to igc)
Fixes: 7cc6fd4c60f2 ("igb: Don't bother clearing Tx buffer_info in igb_clean_tx_ring")
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Reported-by: Erez Geva <erez.geva.ext@siemens.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Vinicius Costa Gomes [Fri, 14 May 2021 00:31:03 +0000 (17:31 -0700)]
igc: Fix use-after-free error during reset
[ Upstream commit
56ea7ed103b46970e171eb1c95916f393d64eeff ]
Cleans the next descriptor to watch (next_to_watch) when cleaning the
TX ring.
Failure to do so can cause invalid memory accesses. If igc_poll() runs
while the controller is being reset this can lead to the driver try to
free a skb that was already freed.
Log message:
[ 101.525242] refcount_t: underflow; use-after-free.
[ 101.525251] WARNING: CPU: 1 PID: 646 at lib/refcount.c:28 refcount_warn_saturate+0xab/0xf0
[ 101.525259] Modules linked in: sch_etf(E) sch_mqprio(E) rfkill(E) intel_rapl_msr(E) intel_rapl_common(E)
x86_pkg_temp_thermal(E) intel_powerclamp(E) coretemp(E) binfmt_misc(E) kvm_intel(E) kvm(E) irqbypass(E) crc32_pclmul(E)
ghash_clmulni_intel(E) aesni_intel(E) mei_wdt(E) libaes(E) crypto_simd(E) cryptd(E) glue_helper(E) snd_hda_codec_hdmi(E)
rapl(E) intel_cstate(E) snd_hda_intel(E) snd_intel_dspcfg(E) sg(E) soundwire_intel(E) intel_uncore(E) at24(E)
soundwire_generic_allocation(E) iTCO_wdt(E) soundwire_cadence(E) intel_pmc_bxt(E) serio_raw(E) snd_hda_codec(E)
iTCO_vendor_support(E) watchdog(E) snd_hda_core(E) snd_hwdep(E) snd_soc_core(E) snd_compress(E) snd_pcsp(E)
soundwire_bus(E) snd_pcm(E) evdev(E) snd_timer(E) mei_me(E) snd(E) soundcore(E) mei(E) configfs(E) ip_tables(E) x_tables(E)
autofs4(E) ext4(E) crc32c_generic(E) crc16(E) mbcache(E) jbd2(E) sd_mod(E) t10_pi(E) crc_t10dif(E) crct10dif_generic(E)
i915(E) ahci(E) libahci(E) ehci_pci(E) igb(E) xhci_pci(E) ehci_hcd(E)
[ 101.525303] drm_kms_helper(E) dca(E) xhci_hcd(E) libata(E) crct10dif_pclmul(E) cec(E) crct10dif_common(E) tsn(E) igc(E)
e1000e(E) ptp(E) i2c_i801(E) crc32c_intel(E) psmouse(E) i2c_algo_bit(E) i2c_smbus(E) scsi_mod(E) lpc_ich(E) pps_core(E)
usbcore(E) drm(E) button(E) video(E)
[ 101.525318] CPU: 1 PID: 646 Comm: irq/37-enp7s0-T Tainted: G E 5.10.30-rt37-tsn1-rt-ipipe #ipipe
[ 101.525320] Hardware name: SIEMENS AG SIMATIC IPC427D/
A5E31233588, BIOS V17.02.09 03/31/2017
[ 101.525322] RIP: 0010:refcount_warn_saturate+0xab/0xf0
[ 101.525325] Code: 05 31 48 44 01 01 e8 f0 c6 42 00 0f 0b c3 80 3d 1f 48 44 01 00 75 90 48 c7 c7 78 a8 f3 a6 c6 05 0f 48
44 01 01 e8 d1 c6 42 00 <0f> 0b c3 80 3d fe 47 44 01 00 0f 85 6d ff ff ff 48 c7 c7 d0 a8 f3
[ 101.525327] RSP: 0018:
ffffbdedc0917cb8 EFLAGS:
00010286
[ 101.525329] RAX:
0000000000000000 RBX:
ffff98fd6becbf40 RCX:
0000000000000001
[ 101.525330] RDX:
0000000000000001 RSI:
ffffffffa6f2700c RDI:
00000000ffffffff
[ 101.525332] RBP:
ffff98fd6becc14c R08:
ffffffffa7463d00 R09:
ffffbdedc0917c50
[ 101.525333] R10:
ffffffffa74c3578 R11:
0000000000000034 R12:
00000000ffffff00
[ 101.525335] R13:
ffff98fd6b0b1000 R14:
0000000000000039 R15:
ffff98fd6be35c40
[ 101.525337] FS:
0000000000000000(0000) GS:
ffff98fd6e240000(0000) knlGS:
0000000000000000
[ 101.525339] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 101.525341] CR2:
00007f34135a3a70 CR3:
0000000150210003 CR4:
00000000001706e0
[ 101.525343] Call Trace:
[ 101.525346] sock_wfree+0x9c/0xa0
[ 101.525353] unix_destruct_scm+0x7b/0xa0
[ 101.525358] skb_release_head_state+0x40/0x90
[ 101.525362] skb_release_all+0xe/0x30
[ 101.525364] napi_consume_skb+0x57/0x160
[ 101.525367] igc_poll+0xb7/0xc80 [igc]
[ 101.525376] ? sched_clock+0x5/0x10
[ 101.525381] ? sched_clock_cpu+0xe/0x100
[ 101.525385] net_rx_action+0x14c/0x410
[ 101.525388] __do_softirq+0xe9/0x2f4
[ 101.525391] __local_bh_enable_ip+0xe3/0x110
[ 101.525395] ? irq_finalize_oneshot.part.47+0xe0/0xe0
[ 101.525398] irq_forced_thread_fn+0x6a/0x80
[ 101.525401] irq_thread+0xe8/0x180
[ 101.525403] ? wake_threads_waitq+0x30/0x30
[ 101.525406] ? irq_thread_check_affinity+0xd0/0xd0
[ 101.525408] kthread+0x183/0x1a0
[ 101.525412] ? kthread_park+0x80/0x80
[ 101.525415] ret_from_fork+0x22/0x30
Fixes: 13b5b7fd6a4a ("igc: Add support for Tx/Rx rings")
Reported-by: Erez Geva <erez.geva.ext@siemens.com>
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Greg Kroah-Hartman [Sun, 25 Jul 2021 12:35:16 +0000 (14:35 +0200)]
Linux 5.4.135
Link: https://lore.kernel.org/r/20210722155617.865866034@linuxfoundation.org
Tested-by: Hulk Robot <hulkrobot@huawei.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Dumazet [Wed, 30 Jun 2021 16:42:44 +0000 (09:42 -0700)]
udp: annotate data races around unix_sk(sk)->gso_size
commit
18a419bad63b7f68a1979e28459782518e7b6bbe upstream.
Accesses to unix_sk(sk)->gso_size are lockless.
Add READ_ONCE()/WRITE_ONCE() around them.
BUG: KCSAN: data-race in udp_lib_setsockopt / udpv6_sendmsg
write to 0xffff88812d78f47c of 2 bytes by task 10849 on cpu 1:
udp_lib_setsockopt+0x3b3/0x710 net/ipv4/udp.c:2696
udpv6_setsockopt+0x63/0x90 net/ipv6/udp.c:1630
sock_common_setsockopt+0x5d/0x70 net/core/sock.c:3265
__sys_setsockopt+0x18f/0x200 net/socket.c:2104
__do_sys_setsockopt net/socket.c:2115 [inline]
__se_sys_setsockopt net/socket.c:2112 [inline]
__x64_sys_setsockopt+0x62/0x70 net/socket.c:2112
do_syscall_64+0x4a/0x90 arch/x86/entry/common.c:47
entry_SYSCALL_64_after_hwframe+0x44/0xae
read to 0xffff88812d78f47c of 2 bytes by task 10852 on cpu 0:
udpv6_sendmsg+0x161/0x16b0 net/ipv6/udp.c:1299
inet6_sendmsg+0x5f/0x80 net/ipv6/af_inet6.c:642
sock_sendmsg_nosec net/socket.c:654 [inline]
sock_sendmsg net/socket.c:674 [inline]
____sys_sendmsg+0x360/0x4d0 net/socket.c:2337
___sys_sendmsg net/socket.c:2391 [inline]
__sys_sendmmsg+0x315/0x4b0 net/socket.c:2477
__do_sys_sendmmsg net/socket.c:2506 [inline]
__se_sys_sendmmsg net/socket.c:2503 [inline]
__x64_sys_sendmmsg+0x53/0x60 net/socket.c:2503
do_syscall_64+0x4a/0x90 arch/x86/entry/common.c:47
entry_SYSCALL_64_after_hwframe+0x44/0xae
value changed: 0x0000 -> 0x0005
Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 10852 Comm: syz-executor.0 Not tainted 5.13.0-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Fixes: bec1f6f69736 ("udp: generate gso with UDP_SEGMENT")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Riccardo Mancini [Thu, 15 Jul 2021 16:07:24 +0000 (18:07 +0200)]
perf test bpf: Free obj_buf
commit
937654ce497fb6e977a8c52baee5f7d9616302d9 upstream.
ASan reports some memory leaks when running:
# perf test "42: BPF filter"
The first of these leaks is caused by obj_buf never being deallocated in
__test__bpf.
This patch adds the missing free.
Signed-off-by: Riccardo Mancini <rickyman7@gmail.com>
Fixes: ba1fae431e74bb42 ("perf test: Add 'perf test BPF'")
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lore.kernel.org/lkml/60f3ca935fe6672e7e866276ce6264c9e26e4c87.1626343282.git.rickyman7@gmail.com
[ Added missing stdlib.h include ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Gu Shengxian [Tue, 6 Jul 2021 01:35:43 +0000 (18:35 -0700)]
bpftool: Properly close va_list 'ap' by va_end() on error
commit
bc832065b60f973771ff3e657214bb21b559833c upstream.
va_list 'ap' was opened but not closed by va_end() in error case. It should
be closed by va_end() before the return.
Fixes: aa52bcbe0e72 ("tools: bpftool: Fix json dump crash on powerpc")
Signed-off-by: Gu Shengxian <gushengxian@yulong.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/bpf/20210706013543.671114-1-gushengxian507419@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Dumazet [Thu, 8 Jul 2021 07:21:09 +0000 (00:21 -0700)]
ipv6: tcp: drop silly ICMPv6 packet too big messages
commit
c7bb4b89033b764eb07db4e060548a6311d801ee upstream.
While TCP stack scales reasonably well, there is still one part that
can be used to DDOS it.
IPv6 Packet too big messages have to lookup/insert a new route,
and if abused by attackers, can easily put hosts under high stress,
with many cpus contending on a spinlock while one is stuck in fib6_run_gc()
ip6_protocol_deliver_rcu()
icmpv6_rcv()
icmpv6_notify()
tcp_v6_err()
tcp_v6_mtu_reduced()
inet6_csk_update_pmtu()
ip6_rt_update_pmtu()
__ip6_rt_update_pmtu()
ip6_rt_cache_alloc()
ip6_dst_alloc()
dst_alloc()
ip6_dst_gc()
fib6_run_gc()
spin_lock_bh() ...
Some of our servers have been hit by malicious ICMPv6 packets
trying to _increase_ the MTU/MSS of TCP flows.
We believe these ICMPv6 packets are a result of a bug in one ISP stack,
since they were blindly sent back for _every_ (small) packet sent to them.
These packets are for one TCP flow:
09:24:36.266491 IP6 Addr1 > Victim ICMP6, packet too big, mtu 1460, length 1240
09:24:36.266509 IP6 Addr1 > Victim ICMP6, packet too big, mtu 1460, length 1240
09:24:36.316688 IP6 Addr1 > Victim ICMP6, packet too big, mtu 1460, length 1240
09:24:36.316704 IP6 Addr1 > Victim ICMP6, packet too big, mtu 1460, length 1240
09:24:36.608151 IP6 Addr1 > Victim ICMP6, packet too big, mtu 1460, length 1240
TCP stack can filter some silly requests :
1) MTU below IPV6_MIN_MTU can be filtered early in tcp_v6_err()
2) tcp_v6_mtu_reduced() can drop requests trying to increase current MSS.
This tests happen before the IPv6 routing stack is entered, thus
removing the potential contention and route exhaustion.
Note that IPv6 stack was performing these checks, but too late
(ie : after the route has been added, and after the potential
garbage collect war)
v2: fix typo caught by Martin, thanks !
v3: exports tcp_mtu_to_mss(), caught by David, thanks !
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Maciej Żenczykowski <maze@google.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Dumazet [Fri, 2 Jul 2021 20:09:03 +0000 (13:09 -0700)]
tcp: annotate data races around tp->mtu_info
commit
561022acb1ce62e50f7a8258687a21b84282a4cb upstream.
While tp->mtu_info is read while socket is owned, the write
sides happen from err handlers (tcp_v[46]_mtu_reduced)
which only own the socket spinlock.
Fixes: 563d34d05786 ("tcp: dont drop MTU reduction indications")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jason Ekstrand [Thu, 24 Jun 2021 17:47:32 +0000 (12:47 -0500)]
dma-buf/sync_file: Don't leak fences on merge failure
commit
ffe000217c5068c5da07ccb1c0f8cce7ad767435 upstream.
Each add_fence() call does a dma_fence_get() on the relevant fence. In
the error path, we weren't calling dma_fence_put() so all those fences
got leaked. Also, in the krealloc_array failure case, we weren't
freeing the fences array. Instead, ensure that i and fences are always
zero-initialized and dma_fence_put() all the fences and kfree(fences) on
every error path.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Christian König <christian.koenig@amd.com>
Fixes: a02b9dc90d84 ("dma-buf/sync_file: refactor fence storage in struct sync_file")
Cc: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Cc: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210624174732.1754546-1-jason@jlekstrand.net
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pavel Skripkin [Tue, 13 Jul 2021 10:58:53 +0000 (13:58 +0300)]
net: fddi: fix UAF in fza_probe
commit
deb7178eb940e2c5caca1b1db084a69b2e59b4c9 upstream.
fp is netdev private data and it cannot be
used after free_netdev() call. Using fp after free_netdev()
can cause UAF bug. Fix it by moving free_netdev() after error message.
Fixes: 61414f5ec983 ("FDDI: defza: Add support for DEC FDDIcontroller 700
TURBOchannel adapter")
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Taehee Yoo [Fri, 9 Jul 2021 17:35:18 +0000 (17:35 +0000)]
net: validate lwtstate->data before returning from skb_tunnel_info()
commit
67a9c94317402b826fc3db32afc8f39336803d97 upstream.
skb_tunnel_info() returns pointer of lwtstate->data as ip_tunnel_info
type without validation. lwtstate->data can have various types such as
mpls_iptunnel_encap, etc and these are not compatible.
So skb_tunnel_info() should validate before returning that pointer.
Splat looks like:
BUG: KASAN: slab-out-of-bounds in vxlan_get_route+0x418/0x4b0 [vxlan]
Read of size 2 at addr
ffff888106ec2698 by task ping/811
CPU: 1 PID: 811 Comm: ping Not tainted 5.13.0+ #1195
Call Trace:
dump_stack_lvl+0x56/0x7b
print_address_description.constprop.8.cold.13+0x13/0x2ee
? vxlan_get_route+0x418/0x4b0 [vxlan]
? vxlan_get_route+0x418/0x4b0 [vxlan]
kasan_report.cold.14+0x83/0xdf
? vxlan_get_route+0x418/0x4b0 [vxlan]
vxlan_get_route+0x418/0x4b0 [vxlan]
[ ... ]
vxlan_xmit_one+0x148b/0x32b0 [vxlan]
[ ... ]
vxlan_xmit+0x25c5/0x4780 [vxlan]
[ ... ]
dev_hard_start_xmit+0x1ae/0x6e0
__dev_queue_xmit+0x1f39/0x31a0
[ ... ]
neigh_xmit+0x2f9/0x940
mpls_xmit+0x911/0x1600 [mpls_iptunnel]
lwtunnel_xmit+0x18f/0x450
ip_finish_output2+0x867/0x2040
[ ... ]
Fixes: 61adedf3e3f1 ("route: move lwtunnel state to dst_entry")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alexander Ovechkin [Fri, 9 Jul 2021 15:28:23 +0000 (18:28 +0300)]
net: send SYNACK packet with accepted fwmark
commit
43b90bfad34bcb81b8a5bc7dc650800f4be1787e upstream.
commit
e05a90ec9e16 ("net: reflect mark on tcp syn ack packets")
fixed IPv4 only.
This part is for the IPv6 side.
Fixes: e05a90ec9e16 ("net: reflect mark on tcp syn ack packets")
Signed-off-by: Alexander Ovechkin <ovov@yandex-team.ru>
Acked-by: Dmitry Yakunin <zeil@yandex-team.ru>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pavel Skripkin [Fri, 9 Jul 2021 14:58:29 +0000 (17:58 +0300)]
net: ti: fix UAF in tlan_remove_one
commit
0336f8ffece62f882ab3012820965a786a983f70 upstream.
priv is netdev private data and it cannot be
used after free_netdev() call. Using priv after free_netdev()
can cause UAF bug. Fix it by moving free_netdev() at the end of the
function.
Fixes: 1e0a8b13d355 ("tlan: cancel work at remove path")
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pavel Skripkin [Fri, 9 Jul 2021 14:24:18 +0000 (17:24 +0300)]
net: qcom/emac: fix UAF in emac_remove
commit
ad297cd2db8953e2202970e9504cab247b6c7cb4 upstream.
adpt is netdev private data and it cannot be
used after free_netdev() call. Using adpt after free_netdev()
can cause UAF bug. Fix it by moving free_netdev() at the end of the
function.
Fixes: 54e19bc74f33 ("net: qcom/emac: do not use devm on internal phy pdev")
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pavel Skripkin [Fri, 9 Jul 2021 14:09:53 +0000 (17:09 +0300)]
net: moxa: fix UAF in moxart_mac_probe
commit
c78eaeebe855fd93f2e77142ffd0404a54070d84 upstream.
In case of netdev registration failure the code path will
jump to init_fail label:
init_fail:
netdev_err(ndev, "init failed\n");
moxart_mac_free_memory(ndev);
irq_map_fail:
free_netdev(ndev);
return ret;
So, there is no need to call free_netdev() before jumping
to error handling path, since it can cause UAF or double-free
bug.
Fixes: 6c821bd9edc9 ("net: Add MOXA ART SoCs ethernet driver")
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hangbin Liu [Fri, 9 Jul 2021 03:45:02 +0000 (11:45 +0800)]
net: ip_tunnel: fix mtu calculation for ETHER tunnel devices
commit
9992a078b1771da354ac1f9737e1e639b687caa2 upstream.
Commit
28e104d00281 ("net: ip_tunnel: fix mtu calculation") removed
dev->hard_header_len subtraction when calculate MTU for tunnel devices
as there is an overhead for device that has header_ops.
But there are ETHER tunnel devices, like gre_tap or erspan, which don't
have header_ops but set dev->hard_header_len during setup. This makes
pkts greater than (MTU - ETH_HLEN) could not be xmited. Fix it by
subtracting the ETHER tunnel devices' dev->hard_header_len for MTU
calculation.
Fixes: 28e104d00281 ("net: ip_tunnel: fix mtu calculation")
Reported-by: Jianlin Shi <jishi@redhat.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Florian Fainelli [Fri, 9 Jul 2021 01:55:32 +0000 (18:55 -0700)]
net: bcmgenet: Ensure all TX/RX queues DMAs are disabled
commit
2b452550a203d88112eaf0ba9fc4b750a000b496 upstream.
Make sure that we disable each of the TX and RX queues in the TDMA and
RDMA control registers. This is a correctness change to be symmetrical
with the code that enables the TX and RX queues.
Tested-by: Maxime Ripard <maxime@cerno.tech>
Fixes: 1c1008c793fa ("net: bcmgenet: add main driver file")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Wolfgang Bumiller [Fri, 2 Jul 2021 12:07:36 +0000 (14:07 +0200)]
net: bridge: sync fdb to new unicast-filtering ports
commit
a019abd8022061b917da767cd1a66ed823724eab upstream.
Since commit
2796d0c648c9 ("bridge: Automatically manage
port promiscuous mode.")
bridges with `vlan_filtering 1` and only 1 auto-port don't
set IFF_PROMISC for unicast-filtering-capable ports.
Normally on port changes `br_manage_promisc` is called to
update the promisc flags and unicast filters if necessary,
but it cannot distinguish between *new* ports and ones
losing their promisc flag, and new ports end up not
receiving the MAC address list.
Fix this by calling `br_fdb_sync_static` in `br_add_if`
after the port promisc flags are updated and the unicast
filter was supposed to have been filled.
Fixes: 2796d0c648c9 ("bridge: Automatically manage port promiscuous mode.")
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
wenxu [Fri, 2 Jul 2021 03:34:31 +0000 (11:34 +0800)]
net/sched: act_ct: fix err check for nf_conntrack_confirm
commit
8955b90c3cdad199137809aac8ccbbb585355913 upstream.
The confirm operation should be checked. If there are any failed,
the packet should be dropped like in ovs and netfilter.
Fixes: b57dc7c13ea9 ("net/sched: Introduce action ct")
Signed-off-by: wenxu <wenxu@ucloud.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Vasily Averin [Thu, 1 Jul 2021 05:02:49 +0000 (08:02 +0300)]
netfilter: ctnetlink: suspicious RCU usage in ctnetlink_dump_helpinfo
commit
c23a9fd209bc6f8c1fa6ee303fdf037d784a1627 upstream.
Two patches listed below removed ctnetlink_dump_helpinfo call from under
rcu_read_lock. Now its rcu_dereference generates following warning:
=============================
WARNING: suspicious RCU usage
5.13.0+ #5 Not tainted
-----------------------------
net/netfilter/nf_conntrack_netlink.c:221 suspicious rcu_dereference_check() usage!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
stack backtrace:
CPU: 1 PID: 2251 Comm: conntrack Not tainted 5.13.0+ #5
Call Trace:
dump_stack+0x7f/0xa1
ctnetlink_dump_helpinfo+0x134/0x150 [nf_conntrack_netlink]
ctnetlink_fill_info+0x2c2/0x390 [nf_conntrack_netlink]
ctnetlink_dump_table+0x13f/0x370 [nf_conntrack_netlink]
netlink_dump+0x10c/0x370
__netlink_dump_start+0x1a7/0x260
ctnetlink_get_conntrack+0x1e5/0x250 [nf_conntrack_netlink]
nfnetlink_rcv_msg+0x613/0x993 [nfnetlink]
netlink_rcv_skb+0x50/0x100
nfnetlink_rcv+0x55/0x120 [nfnetlink]
netlink_unicast+0x181/0x260
netlink_sendmsg+0x23f/0x460
sock_sendmsg+0x5b/0x60
__sys_sendto+0xf1/0x160
__x64_sys_sendto+0x24/0x30
do_syscall_64+0x36/0x70
entry_SYSCALL_64_after_hwframe+0x44/0xae
Fixes: 49ca022bccc5 ("netfilter: ctnetlink: don't dump ct extensions of unconfirmed conntracks")
Fixes: 0b35f6031a00 ("netfilter: Remove duplicated rcu_read_lock.")
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Reviewed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Vadim Fedorenko [Thu, 1 Jul 2021 23:47:00 +0000 (02:47 +0300)]
net: ipv6: fix return value of ip6_skb_dst_mtu
commit
40fc3054b45820c28ea3c65e2c86d041dc244a8a upstream.
Commit
628a5c561890 ("[INET]: Add IP(V6)_PMTUDISC_RPOBE") introduced
ip6_skb_dst_mtu with return value of signed int which is inconsistent
with actually returned values. Also 2 users of this function actually
assign its value to unsigned int variable and only __xfrm6_output
assigns result of this function to signed variable but actually uses
as unsigned in further comparisons and calls. Change this function
to return unsigned int value.
Fixes: 628a5c561890 ("[INET]: Add IP(V6)_PMTUDISC_RPOBE")
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Vadim Fedorenko <vfedorenko@novek.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Marek Behún [Wed, 30 Jun 2021 22:22:28 +0000 (00:22 +0200)]
net: dsa: mv88e6xxx: enable .rmu_disable() on Topaz
commit
3709488790022c85720f991bff50d48ed5a36e6a upstream.
Commit
9e5baf9b36367 ("net: dsa: mv88e6xxx: add RMU disable op")
introduced .rmu_disable() method with implementation for several models,
but forgot to add Topaz, which can use the Peridot implementation.
Use the Peridot implementation of .rmu_disable() on Topaz.
Signed-off-by: Marek Behún <kabel@kernel.org>
Fixes: 9e5baf9b36367 ("net: dsa: mv88e6xxx: add RMU disable op")
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Marek Behún [Wed, 30 Jun 2021 22:22:26 +0000 (00:22 +0200)]
net: dsa: mv88e6xxx: enable .port_set_policy() on Topaz
commit
7da467d82d1ed4fb317aff836f99709169e73f10 upstream.
Commit
f3a2cd326e44 ("net: dsa: mv88e6xxx: introduce .port_set_policy")
introduced .port_set_policy() method with implementation for several
models, but forgot to add Topaz, which can use the 6352 implementation.
Use the 6352 implementation of .port_set_policy() on Topaz.
Signed-off-by: Marek Behún <kabel@kernel.org>
Fixes: f3a2cd326e44 ("net: dsa: mv88e6xxx: introduce .port_set_policy")
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mikulas Patocka [Thu, 4 Feb 2021 10:20:52 +0000 (05:20 -0500)]
dm writecache: return the exact table values that were set
commit
054bee16163df023e2589db09fd27d81f7ad9e72 upstream.
LVM doesn't like it when the target returns different values from what
was set in the constructor. Fix dm-writecache so that the returned
table values are exactly the same as requested values.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org # v4.18+
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Nanyong Sun [Tue, 20 Jul 2021 08:20:48 +0000 (16:20 +0800)]
mm: slab: fix kmem_cache_create failed when sysfs node not destroyed
The commit
d38a2b7a9c93 ("mm: memcg/slab: fix memory leak at non-root
kmem_cache destroy") introduced a problem: If one thread destroy a
kmem_cache A and another thread concurrently create a kmem_cache B,
which is mergeable with A and has same size with A, the B may fail to
create due to the duplicate sysfs node.
The scenario in detail:
1) Thread 1 uses kmem_cache_destroy() to destroy kmem_cache A which is
mergeable, it decreases A's refcount and if refcount is 0, then call
memcg_set_kmem_cache_dying() which set A->memcg_params.dying = true,
then unlock the slab_mutex and call flush_memcg_workqueue(), it may cost
a while.
Note: now the sysfs node(like '/kernel/slab/:
0000248') of A is still
present, it will be deleted in shutdown_cache() which will be called
after flush_memcg_workqueue() is done and lock the slab_mutex again.
2) Now if thread 2 is coming, it use kmem_cache_create() to create B, which
is mergeable with A(their size is same), it gain the lock of slab_mutex,
then call __kmem_cache_alias() trying to find a mergeable node, because
of the below added code in commit
d38a2b7a9c93 ("mm: memcg/slab: fix
memory leak at non-root kmem_cache destroy"), B is not mergeable with
A whose memcg_params.dying is true.
int slab_unmergeable(struct kmem_cache *s)
if (s->refcount < 0)
return 1;
/*
* Skip the dying kmem_cache.
*/
if (s->memcg_params.dying)
return 1;
return 0;
}
So B has to create its own sysfs node by calling:
create_cache->
__kmem_cache_create->
sysfs_slab_add->
kobject_init_and_add
Because B is mergeable itself, its filename of sysfs node is based on its size,
like '/kernel/slab/:
0000248', which is duplicate with A, and the sysfs
node of A is still present now, so kobject_init_and_add() will return
fail and result in kmem_cache_create() fail.
Concurrently modprobe and rmmod the two modules below can reproduce the issue
quickly: nf_conntrack_expect, se_sess_cache. See call trace in the end.
LTS versions of v4.19.y and v5.4.y have this problem, whereas linux versions after
v5.9 do not have this problem because the patchset: ("The new cgroup slab memory
controller") almost refactored memcg slab.
A potential solution(this patch belongs): Just let the dying kmem_cache be mergeable,
the slab_mutex lock can prevent the race between alias kmem_cache creating thread
and root kmem_cache destroying thread. In the destroying thread, after
flush_memcg_workqueue() is done, judge the refcount again, if someone
reference it again during un-lock time, we don't need to destroy the kmem_cache
completely, we can reuse it.
Another potential solution: revert the commit
d38a2b7a9c93 ("mm: memcg/slab:
fix memory leak at non-root kmem_cache destroy"), compare to the fail of
kmem_cache_create, the memory leak in special scenario seems less harmful.
Call trace:
sysfs: cannot create duplicate filename '/kernel/slab/:
0000248'
Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015
Call trace:
dump_backtrace+0x0/0x198
show_stack+0x24/0x30
dump_stack+0xb0/0x100
sysfs_warn_dup+0x6c/0x88
sysfs_create_dir_ns+0x104/0x120
kobject_add_internal+0xd0/0x378
kobject_init_and_add+0x90/0xd8
sysfs_slab_add+0x16c/0x2d0
__kmem_cache_create+0x16c/0x1d8
create_cache+0xbc/0x1f8
kmem_cache_create_usercopy+0x1a0/0x230
kmem_cache_create+0x50/0x68
init_se_kmem_caches+0x38/0x258 [target_core_mod]
target_core_init_configfs+0x8c/0x390 [target_core_mod]
do_one_initcall+0x54/0x230
do_init_module+0x64/0x1ec
load_module+0x150c/0x16f0
__se_sys_finit_module+0xf0/0x108
__arm64_sys_finit_module+0x24/0x30
el0_svc_common+0x80/0x1c0
el0_svc_handler+0x78/0xe0
el0_svc+0x10/0x260
kobject_add_internal failed for :
0000248 with -EEXIST, don't try to register things with the same name in the same directory.
kmem_cache_create(se_sess_cache) failed with error -17
Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015
Call trace:
dump_backtrace+0x0/0x198
show_stack+0x24/0x30
dump_stack+0xb0/0x100
kmem_cache_create_usercopy+0xa8/0x230
kmem_cache_create+0x50/0x68
init_se_kmem_caches+0x38/0x258 [target_core_mod]
target_core_init_configfs+0x8c/0x390 [target_core_mod]
do_one_initcall+0x54/0x230
do_init_module+0x64/0x1ec
load_module+0x150c/0x16f0
__se_sys_finit_module+0xf0/0x108
__arm64_sys_finit_module+0x24/0x30
el0_svc_common+0x80/0x1c0
el0_svc_handler+0x78/0xe0
el0_svc+0x10/0x260
Fixes: d38a2b7a9c93 ("mm: memcg/slab: fix memory leak at non-root kmem_cache destroy")
Signed-off-by: Nanyong Sun <sunnanyong@huawei.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sanket Parmar [Mon, 17 May 2021 15:05:12 +0000 (17:05 +0200)]
usb: cdns3: Enable TDL_CHK only for OUT ep
commit
d6eef886903c4bb5af41b9a31d4ba11dc7a6f8e8 upstream.
ZLP gets stuck if TDL_CHK bit is set and TDL_FROM_TRB is used
as TDL source for IN endpoints. To fix it, TDL_CHK is only
enabled for OUT endpoints.
Fixes: 7733f6c32e36 ("usb: cdns3: Add Cadence USB3 DRD Driver")
Reported-by: Aswath Govindraju <a-govindraju@ti.com>
Signed-off-by: Sanket Parmar <sparmar@cadence.com>
Link: https://lore.kernel.org/r/1621263912-13175-1-git-send-email-sparmar@cadence.com
Signed-off-by: Peter Chen <peter.chen@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Daniel Rosenberg [Thu, 3 Jun 2021 09:50:37 +0000 (09:50 +0000)]
f2fs: Show casefolding support only when supported
commit
39307f8ee3539478c28e71b4909b5b028cce14b1 upstream.
The casefolding feature is only supported when CONFIG_UNICODE is set.
This modifies the feature list f2fs presents under sysfs accordingly.
Fixes: 5aba54302a46 ("f2fs: include charset encoding information in the superblock")
Cc: stable@vger.kernel.org # v5.4+
Signed-off-by: Daniel Rosenberg <drosen@google.com>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pali Rohár [Thu, 20 May 2021 11:38:44 +0000 (13:38 +0200)]
arm64: dts: marvell: armada-37xx: move firmware node to generic dtsi file
[ Upstream commit
3a52a48973b355b3aac5add92ef50650ae37c2bd ]
Move the turris-mox-rwtm firmware node from Turris MOX' device tree into
the generic armada-37xx.dtsi file and use the generic compatible string
'marvell,armada-3700-rwtm-firmware' instead of the current one.
Turris MOX DTS file contains also old compatible string for backward
compatibility.
The Turris MOX rWTM firmware can be used on any Armada 37xx device,
giving them access to the rWTM hardware random number generator, which
is otherwise unavailable.
This change allows Linux to load the turris-mox-rwtm.ko module on these
boards.
Tested on ESPRESSObin v5 with both default Marvell WTMI firmware and
CZ.NIC's firmware. With default WTMI firmware the turris-mox-rwtm fails
to probe, while with CZ.NIC's firmware it registers the HW random number
generator.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Pali Rohár [Thu, 20 May 2021 11:38:43 +0000 (13:38 +0200)]
firmware: turris-mox-rwtm: add marvell,armada-3700-rwtm-firmware compatible string
[ Upstream commit
90ae47215de3fec862aeb1a0f0e28bb505ab1351 ]
Add more generic compatible string 'marvell,armada-3700-rwtm-firmware' for
this driver, since it can also be used on other Armada 3720 devices.
Current compatible string 'cznic,turris-mox-rwtm' is kept for backward
compatibility.
Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Marek Behún [Wed, 4 Sep 2019 17:07:39 +0000 (19:07 +0200)]
arm64: dts: armada-3720-turris-mox: add firmware node
[ Upstream commit
46d2f6d0c99f7f95600e633c7dc727745faaf95e ]
Add the node representing the firmware running on the secure processor.
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Paulo Alcantara [Fri, 2 Jul 2021 14:50:54 +0000 (11:50 -0300)]
cifs: prevent NULL deref in cifs_compose_mount_options()
[ Upstream commit
03313d1c3a2f086bb60920607ab79ac8f8578306 ]
The optional @ref parameter might contain an NULL node_name, so
prevent dereferencing it in cifs_compose_mount_options().
Addresses-Coverity:
1476408 ("Explicit null dereferenced")
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Heiko Carstens [Mon, 5 Jul 2021 18:16:10 +0000 (20:16 +0200)]
s390: introduce proper type handling call_on_stack() macro
[ Upstream commit
41d71fe59cce41237f24f3b7bdc1b414069a34ed ]
The existing CALL_ON_STACK() macro allows for subtle bugs:
- There is no type checking of the function that is being called. That
is: missing or too many arguments do not cause any compile error or
warning. The same is true if the return type of the called function
changes. This can lead to quite random bugs.
- Sign and zero extension of arguments is missing. Given that the s390
C ABI requires that the caller of a function performs proper sign
and zero extension this can also lead to subtle bugs.
- If arguments to the CALL_ON_STACK() macros contain functions calls
register corruption can happen due to register asm constructs being
used.
Therefore introduce a new call_on_stack() macro which is supposed to
fix all these problems.
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Odin Ugedal [Tue, 29 Jun 2021 12:14:52 +0000 (14:14 +0200)]
sched/fair: Fix CFS bandwidth hrtimer expiry type
[ Upstream commit
72d0ad7cb5bad265adb2014dbe46c4ccb11afaba ]
The time remaining until expiry of the refresh_timer can be negative.
Casting the type to an unsigned 64-bit value will cause integer
underflow, making the runtime_refresh_within return false instead of
true. These situations are rare, but they do happen.
This does not cause user-facing issues or errors; other than
possibly unthrottling cfs_rq's using runtime from the previous period(s),
making the CFS bandwidth enforcement less strict in those (special)
situations.
Signed-off-by: Odin Ugedal <odin@uged.al>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Ben Segall <bsegall@google.com>
Link: https://lore.kernel.org/r/20210629121452.18429-1-odin@uged.al
Signed-off-by: Sasha Levin <sashal@kernel.org>
Javed Hasan [Thu, 24 Jun 2021 17:18:02 +0000 (10:18 -0700)]
scsi: qedf: Add check to synchronize abort and flush
[ Upstream commit
df99446d5c2a63dc6e6920c8090da0e9da6539d5 ]
A race condition was observed between qedf_cleanup_fcport() and
qedf_process_error_detect()->qedf_initiate_abts():
[
2069091.203145] BUG: unable to handle kernel NULL pointer dereference at
0000000000000030
[
2069091.213100] IP: [<
ffffffffc0666cc6>] qedf_process_error_detect+0x96/0x130 [qedf]
[
2069091.223391] PGD
1943049067 PUD
194304e067 PMD 0
[
2069091.233420] Oops: 0000 [#1] SMP
[
2069091.361820] CPU: 1 PID: 14751 Comm: kworker/1:46 Kdump: loaded Tainted: P OE ------------ 3.10.0-1160.25.1.el7.x86_64 #1
[
2069091.388474] Hardware name: HPE Synergy 480 Gen10/Synergy 480 Gen10 Compute Module, BIOS I42 04/08/2020
[
2069091.402148] Workqueue: qedf_io_wq qedf_fp_io_handler [qedf]
[
2069091.415780] task:
ffff9bb9f5190000 ti:
ffff9bacaef9c000 task.ti:
ffff9bacaef9c000
[
2069091.429590] RIP: 0010:[<
ffffffffc0666cc6>] [<
ffffffffc0666cc6>] qedf_process_error_detect+0x96/0x130 [qedf]
[
2069091.443666] RSP: 0018:
ffff9bacaef9fdb8 EFLAGS:
00010246
[
2069091.457692] RAX:
0000000000000000 RBX:
ffff9bbbbbfb18a0 RCX:
ffffffffc0672310
[
2069091.471997] RDX:
00000000000005de RSI:
ffffffffc066e7f0 RDI:
ffff9beb3f4538d8
[
2069091.486130] RBP:
ffff9bacaef9fdd8 R08:
0000000000006000 R09:
0000000000006000
[
2069091.500321] R10:
0000000000001551 R11:
ffffb582996ffff8 R12:
ffffb5829b39cc18
[
2069091.514779] R13:
ffff9badab380c28 R14:
ffffd5827f643900 R15:
0000000000000040
[
2069091.529472] FS:
0000000000000000(0000) GS:
ffff9beb3f440000(0000) knlGS:
0000000000000000
[
2069091.543926] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[
2069091.558942] CR2:
0000000000000030 CR3:
000000193b9a2000 CR4:
00000000007607e0
[
2069091.573424] DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
[
2069091.587876] DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
[
2069091.602007] PKRU:
00000000
[
2069091.616010] Call Trace:
[
2069091.629902] [<
ffffffffc0663969>] qedf_process_cqe+0x109/0x2e0 [qedf]
[
2069091.643941] [<
ffffffffc0663b66>] qedf_fp_io_handler+0x26/0x60 [qedf]
[
2069091.657948] [<
ffffffff85ebddcf>] process_one_work+0x17f/0x440
[
2069091.672111] [<
ffffffff85ebeee6>] worker_thread+0x126/0x3c0
[
2069091.686057] [<
ffffffff85ebedc0>] ? manage_workers.isra.26+0x2a0/0x2a0
[
2069091.700033] [<
ffffffff85ec5da1>] kthread+0xd1/0xe0
[
2069091.713891] [<
ffffffff85ec5cd0>] ? insert_kthread_work+0x40/0x40
Add check in qedf_process_error_detect(). When flush is active, let the
cmds be completed from the cleanup contex.
Link: https://lore.kernel.org/r/20210624171802.598-1-jhasan@marvell.com
Signed-off-by: Javed Hasan <jhasan@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Javed Hasan [Tue, 15 Jun 2021 16:59:39 +0000 (09:59 -0700)]
scsi: libfc: Fix array index out of bound exception
[ Upstream commit
b27c4577557045f1ab3cdfeabfc7f3cd24aca1fe ]
Fix array index out of bound exception in fc_rport_prli_resp().
Link: https://lore.kernel.org/r/20210615165939.24327-1-jhasan@marvell.com
Signed-off-by: Javed Hasan <jhasan@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yufen Yu [Tue, 22 Jun 2021 03:40:37 +0000 (11:40 +0800)]
scsi: libsas: Add LUN number check in .slave_alloc callback
[ Upstream commit
49da96d77938db21864dae6b7736b71e96c1d203 ]
Offlining a SATA device connected to a hisi SAS controller and then
scanning the host will result in detecting 255 non-existent devices:
# lsscsi
[2:0:0:0] disk ATA Samsung SSD 860 2B6Q /dev/sda
[2:0:1:0] disk ATA WDC WD2003FYYS-3 1D01 /dev/sdb
[2:0:2:0] disk SEAGATE ST600MM0006 B001 /dev/sdc
# echo "offline" > /sys/block/sdb/device/state
# echo "- - -" > /sys/class/scsi_host/host2/scan
# lsscsi
[2:0:0:0] disk ATA Samsung SSD 860 2B6Q /dev/sda
[2:0:1:0] disk ATA WDC WD2003FYYS-3 1D01 /dev/sdb
[2:0:1:1] disk ATA WDC WD2003FYYS-3 1D01 /dev/sdh
...
[2:0:1:255] disk ATA WDC WD2003FYYS-3 1D01 /dev/sdjb
After a REPORT LUN command issued to the offline device fails, the SCSI
midlayer tries to do a sequential scan of all devices whose LUN number is
not 0. However, SATA does not support LUN numbers at all.
Introduce a generic sas_slave_alloc() handler which will return -ENXIO for
SATA devices if the requested LUN number is larger than 0 and make libsas
drivers use this function as their .slave_alloc callback.
Link: https://lore.kernel.org/r/20210622034037.1467088-1-yuyufen@huawei.com
Reported-by: Wu Bo <wubo40@huawei.com>
Suggested-by: John Garry <john.garry@huawei.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Reviewed-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Yufen Yu <yuyufen@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Colin Ian King [Mon, 21 Jun 2021 15:17:27 +0000 (16:17 +0100)]
scsi: aic7xxx: Fix unintentional sign extension issue on left shift of u8
[ Upstream commit
332a9dd1d86f1e7203fc7f0fd7e82f0b304200fe ]
The shifting of the u8 integer returned fom ahc_inb(ahc, port+3) by 24 bits
to the left will be promoted to a 32 bit signed int and then sign-extended
to a u64. In the event that the top bit of the u8 is set then all then all
the upper 32 bits of the u64 end up as also being set because of the
sign-extension. Fix this by casting the u8 values to a u64 before the 24
bit left shift.
[ This dates back to 2002, I found the offending commit from the git
history git://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git,
commit
f58eb66c0b0a ("Update aic7xxx driver to 6.2.10...") ]
Link: https://lore.kernel.org/r/20210621151727.20667-1-colin.king@canonical.com
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Addresses-Coverity: ("Unintended sign extension")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Krzysztof Kozlowski [Wed, 26 May 2021 17:20:34 +0000 (13:20 -0400)]
rtc: max77686: Do not enforce (incorrect) interrupt trigger type
[ Upstream commit
742b0d7e15c333303daad4856de0764f4bc83601 ]
Interrupt line can be configured on different hardware in different way,
even inverted. Therefore driver should not enforce specific trigger
type - edge falling - but instead rely on Devicetree to configure it.
The Maxim 77686 datasheet describes the interrupt line as active low
with a requirement of acknowledge from the CPU therefore the edge
falling is not correct.
The interrupt line is shared between PMIC and RTC driver, so using level
sensitive interrupt is here especially important to avoid races. With
an edge configuration in case if first PMIC signals interrupt followed
shortly after by the RTC, the interrupt might not be yet cleared/acked
thus the second one would not be noticed.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20210526172036.183223-6-krzysztof.kozlowski@canonical.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Matthias Maennich [Sat, 12 Jun 2021 14:18:38 +0000 (15:18 +0100)]
kbuild: mkcompile_h: consider timestamp if KBUILD_BUILD_TIMESTAMP is set
[ Upstream commit
a979522a1a88556e42a22ce61bccc58e304cb361 ]
To avoid unnecessary recompilations, mkcompile_h does not regenerate
compile.h if just the timestamp changed.
Though, if KBUILD_BUILD_TIMESTAMP is set, an explicit timestamp for the
build was requested, in which case we should not ignore it.
If a user follows the documentation for reproducible builds [1] and
defines KBUILD_BUILD_TIMESTAMP as the git commit timestamp, a clean
build will have the correct timestamp. A subsequent cherry-pick (or
amend) changes the commit timestamp and if an incremental build is done
with a different KBUILD_BUILD_TIMESTAMP now, that new value is not taken
into consideration. But it should for reproducibility.
Hence, whenever KBUILD_BUILD_TIMESTAMP is explicitly set, do not ignore
UTS_VERSION when making a decision about whether the regenerated version
of compile.h should be moved into place.
[1] https://www.kernel.org/doc/html/latest/kbuild/reproducible-builds.html
Signed-off-by: Matthias Maennich <maennich@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yang Yingliang [Mon, 17 May 2021 05:10:20 +0000 (13:10 +0800)]
thermal/core: Correct function name thermal_zone_device_unregister()
[ Upstream commit
a052b5118f13febac1bd901fe0b7a807b9d6b51c ]
Fix the following make W=1 kernel build warning:
drivers/thermal/thermal_core.c:1376: warning: expecting prototype for thermal_device_unregister(). Prototype was for thermal_zone_device_unregister() instead
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20210517051020.3463536-1-yangyingliang@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Lucas Stach [Fri, 7 May 2021 22:12:13 +0000 (00:12 +0200)]
arm64: dts: imx8mq: assign PCIe clocks
[ Upstream commit
15a5261e4d052bf85c7fba24dbe0e9a7c8c05925 ]
This fixes multiple issues with the current non-existent PCIe clock setup:
The controller can run at up to 250MHz, so use a parent that provides this
clock.
The PHY needs an exact 100MHz reference clock to function if the PCIe
refclock is not fed in via the refclock pads. While this mode is not
supported (yet) in the driver it doesn't hurt to make sure we are
providing a clock with the right rate.
The AUX clock is specified to have a maximum clock rate of 10MHz. So
the current setup, which drives it straight from the 25MHz oscillator is
actually overclocking the AUX input.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Mian Yousaf Kaukab [Wed, 28 Apr 2021 12:58:07 +0000 (14:58 +0200)]
arm64: dts: ls208xa: remove bus-num from dspi node
[ Upstream commit
8240c972c1798ea013cbb407722295fc826b3584 ]
On LS2088A-RDB board, if the spi-fsl-dspi driver is built as module
then its probe fails with the following warning:
[ 10.471363] couldn't get idr
[ 10.471381] WARNING: CPU: 4 PID: 488 at drivers/spi/spi.c:2689 spi_register_controller+0x73c/0x8d0
...
[ 10.471651] fsl-dspi
2100000.spi: Problem registering DSPI ctlr
[ 10.471708] fsl-dspi: probe of
2100000.spi failed with error -16
Reason for the failure is that bus-num property is set for dspi node.
However, bus-num property is not set for the qspi node. If probe for
spi-fsl-qspi happens first then id 0 is dynamically allocated to it.
Call to spi_register_controller() from spi-fsl-dspi driver then fails.
Since commit
29d2daf2c33c ("spi: spi-fsl-dspi: Make bus-num property
optional") bus-num property is optional. Remove bus-num property from
dspi node to fix the issue.
Signed-off-by: Mian Yousaf Kaukab <ykaukab@suse.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Thierry Reding [Tue, 13 Apr 2021 12:23:35 +0000 (14:23 +0200)]
firmware: tegra: bpmp: Fix Tegra234-only builds
[ Upstream commit
bd778b893963d67d7eb01f49d84ffcd3eaf229dd ]
The tegra186_bpmp_ops symbol is used on Tegra234, so make sure it's
available.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Thierry Reding [Tue, 13 Apr 2021 12:20:57 +0000 (14:20 +0200)]
soc/tegra: fuse: Fix Tegra234-only builds
[ Upstream commit
e2d0ee225e49a5553986f3138dd2803852a31fd5 ]
The tegra30_fuse_read() symbol is used on Tegra234, so make sure it's
available.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Alexandre Torgue [Thu, 15 Apr 2021 10:10:31 +0000 (12:10 +0200)]
ARM: dts: stm32: move stmmac axi config in ethernet node on stm32mp15
[ Upstream commit
fb1406335c067be074eab38206cf9abfdce2fb0b ]
It fixes the following warning seen running "make dtbs_check W=1"
Warning (simple_bus_reg): /soc/stmmac-axi-config: missing or empty
reg/ranges property
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Alexandre Torgue [Thu, 15 Apr 2021 10:10:30 +0000 (12:10 +0200)]
ARM: dts: stm32: fix i2c node name on stm32f746 to prevent warnings
[ Upstream commit
ad0ed10ba5792064fc3accbf8f0341152a57eecb ]
Replace upper case by lower case in i2c nodes name.
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Johan Jonker [Sun, 6 Jun 2021 18:16:32 +0000 (20:16 +0200)]
ARM: dts: rockchip: fix supply properties in io-domains nodes
[ Upstream commit
f07edc41220b14ce057a4e6d7161b30688ddb8a2 ]
A test with rockchip-io-domain.yaml gives notifications
for supply properties in io-domains nodes.
Fix them all into ".*-supply$" format.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20210606181632.13371-1-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sudeep Holla [Tue, 8 Jun 2021 14:51:33 +0000 (15:51 +0100)]
arm64: dts: juno: Update SCPI nodes as per the YAML schema
[ Upstream commit
70010556b158a0fefe43415fb0c58347dcce7da0 ]
The SCPI YAML schema expects standard node names for clocks and
power domain controllers. Fix those as per the schema for Juno
platforms.
Link: https://lore.kernel.org/r/20210608145133.2088631-1-sudeep.holla@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Alexandre Torgue [Thu, 15 Apr 2021 10:10:27 +0000 (12:10 +0200)]
ARM: dts: stm32: fix timer nodes on STM32 MCU to prevent warnings
[ Upstream commit
2388f14d8747f8304e26ee870790e188c9431efd ]
Prevent warning seen with "make dtbs_check W=1" command:
Warning (avoid_unnecessary_addr_size): /soc/timers@
40001c00: unnecessary
address-cells/size-cells without "ranges" or child "reg" property
Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Alexandre Torgue [Thu, 15 Apr 2021 10:10:26 +0000 (12:10 +0200)]
ARM: dts: stm32: fix RCC node name on stm32f429 MCU
[ Upstream commit
e4b948415a89a219d13e454011cdcf9e63ecc529 ]
This prevent warning observed with "make dtbs_check W=1"
Warning (simple_bus_reg): /soc/rcc@
40023810: simple-bus unit address format
error, expected "
40023800"
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Alexandre Torgue [Thu, 15 Apr 2021 10:10:25 +0000 (12:10 +0200)]
ARM: dts: stm32: fix gpio-keys node on STM32 MCU boards
[ Upstream commit
bf24b91f4baf7e421c770a1d9c7d381b10206ac9 ]
Fix following warning observed with "make dtbs_check W=1" command.
It concerns f429 eval and disco boards, f769 disco board.
Warning (unit_address_vs_reg): /gpio_keys/button@0: node has a unit name,
but no reg or ranges property
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Grygorii Strashko [Fri, 21 May 2021 22:24:10 +0000 (01:24 +0300)]
ARM: dts: am437x-gp-evm: fix ti,no-reset-on-init flag for gpios
[ Upstream commit
2566d5b8c1670f7d7a44cc1426d254147ec5c421 ]
The ti,no-reset-on-init flag need to be at the interconnect target module
level for the modules that have it defined.
The ti-sysc driver handles this case, but produces warning, not a critical
issue.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Grygorii Strashko [Fri, 21 May 2021 22:24:09 +0000 (01:24 +0300)]
ARM: dts: am57xx-cl-som-am57x: fix ti,no-reset-on-init flag for gpios
[ Upstream commit
b644c5e01c870056e13a096e14b9a92075c8f682 ]
The ti,no-reset-on-init flag need to be at the interconnect target module
level for the modules that have it defined.
The ti-sysc driver handles this case, but produces warning, not a critical
issue.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Masahiro Yamada [Mon, 17 May 2021 07:03:13 +0000 (16:03 +0900)]
kbuild: sink stdout from cmd for silent build
[ Upstream commit
174a1dcc96429efce4ef7eb2f5c4506480da2182 ]
When building with 'make -s', no output to stdout should be printed.
As Arnd Bergmann reported [1], mkimage shows the detailed information
of the generated images.
I think this should be suppressed by the 'cmd' macro instead of by
individual scripts.
Insert 'exec >/dev/null;' in order to redirect stdout to /dev/null for
silent builds.
[Note about this implementation]
'exec >/dev/null;' may look somewhat tricky, but this has a reason.
Appending '>/dev/null' at the end of command line is a common way for
redirection, so I first tried this:
cmd = @set -e; $(echo-cmd) $(cmd_$(1)) >/dev/null
... but it would not work if $(cmd_$(1)) itself contains a redirection.
For example, cmd_wrap in scripts/Makefile.asm-generic redirects the
output from the 'echo' command into the target file.
It would be expanded into:
echo "#include <asm-generic/$*.h>" > $@ >/dev/null
Then, the target file gets empty because the string will go to /dev/null
instead of $@.
Next, I tried this:
cmd = @set -e; $(echo-cmd) { $(cmd_$(1)); } >/dev/null
The form above would be expanded into:
{ echo "#include <asm-generic/$*.h>" > $@; } >/dev/null
This works as expected. However, it would be a syntax error if
$(cmd_$(1)) is empty.
When CONFIG_TRIM_UNUSED_KSYMS is disabled, $(call cmd,gen_ksymdeps) in
scripts/Makefile.build would be expanded into:
set -e; { ; } >/dev/null
..., which causes an syntax error.
I also tried this:
cmd = @set -e; $(echo-cmd) ( $(cmd_$(1)) ) >/dev/null
... but this causes a syntax error for the same reason.
So, finally I adopted:
cmd = @set -e; $(echo-cmd) exec >/dev/null; $(cmd_$(1))
[1]: https://lore.kernel.org/lkml/
20210514135752.
2910387-1-arnd@kernel.org/
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Bixuan Cui [Sat, 8 May 2021 03:15:09 +0000 (11:15 +0800)]
rtc: mxc_v2: add missing MODULE_DEVICE_TABLE
[ Upstream commit
206e04ec7539e7bfdde9aa79a7cde656c9eb308e ]
This patch adds missing MODULE_DEVICE_TABLE definition which generates
correct modalias for automatic loading of this driver when it is built
as an external module.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Bixuan Cui <cuibixuan@huawei.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20210508031509.53735-1-cuibixuan@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jonathan Neuschäfer [Sat, 24 Apr 2021 12:37:28 +0000 (14:37 +0200)]
ARM: imx: pm-imx5: Fix references to imx5_cpu_suspend_info
[ Upstream commit
89b759469d525f4d5f9c29cd3b1f490311c67f85 ]
The name of the struct, as defined in arch/arm/mach-imx/pm-imx5.c,
is imx5_cpu_suspend_info.
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Primoz Fiser [Mon, 12 Apr 2021 06:24:50 +0000 (08:24 +0200)]
ARM: dts: imx6: phyFLEX: Fix UART hardware flow control
[ Upstream commit
14cdc1f243d79e0b46be150502b7dba9c5a6bdfd ]
Serial interface uart3 on phyFLEX board is capable of 5-wire connection
including signals RTS and CTS for hardware flow control.
Fix signals UART3_CTS_B and UART3_RTS_B padmux assignments and add
missing property "uart-has-rtscts" to allow serial interface to be
configured and used with the hardware flow control.
Signed-off-by: Primoz Fiser <primoz.fiser@norik.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Rafał Miłecki [Fri, 16 Apr 2021 13:37:53 +0000 (15:37 +0200)]
ARM: dts: Hurricane 2: Fix NAND nodes names
[ Upstream commit
a4528d9029e2eda16e4fc9b9da1de1fbec10ab26 ]
This matches nand-controller.yaml requirements.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Rafał Miłecki [Fri, 16 Apr 2021 13:37:52 +0000 (15:37 +0200)]
ARM: dts: BCM63xx: Fix NAND nodes names
[ Upstream commit
75e2f012f6e34b93124d1d86eaa8f27df48e9ea0 ]
This matches nand-controller.yaml requirements.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Rafał Miłecki [Fri, 16 Apr 2021 13:37:51 +0000 (15:37 +0200)]
ARM: NSP: dts: fix NAND nodes names
[ Upstream commit
0484594be733d5cdf976f55a2d4e8d887f351b69 ]
This matches nand-controller.yaml requirements.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Rafał Miłecki [Fri, 16 Apr 2021 13:37:50 +0000 (15:37 +0200)]
ARM: Cygnus: dts: fix NAND nodes names
[ Upstream commit
e256b48a3b07ee1ae4bfa60abbf509ba8e386862 ]
This matches nand-controller.yaml requirements.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Rafał Miłecki [Fri, 16 Apr 2021 13:37:49 +0000 (15:37 +0200)]
ARM: brcmstb: dts: fix NAND nodes names
[ Upstream commit
9a800ce1aada6e0f56b78e4713f4858c8990c1f7 ]
This matches nand-controller.yaml requirements.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Philipp Zabel [Thu, 4 Mar 2021 16:01:39 +0000 (17:01 +0100)]
reset: ti-syscon: fix to_ti_syscon_reset_data macro
[ Upstream commit
05cf8fffcdeb47aef1203c08cbec5224fd3a0e1c ]
The to_ti_syscon_reset_data macro currently only works if the
parameter passed into it is called 'rcdev'.
Fixes a checkpatch --strict issue:
CHECK: Macro argument reuse 'rcdev' - possible side-effects?
#53: FILE: drivers/reset/reset-ti-syscon.c:53:
+#define to_ti_syscon_reset_data(rcdev) \
+ container_of(rcdev, struct ti_syscon_reset_data, rcdev)
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Elaine Zhang [Sat, 17 Apr 2021 11:29:43 +0000 (13:29 +0200)]
arm64: dts: rockchip: Fix power-controller node names for rk3328
[ Upstream commit
6e6a282b49c6db408d27231e3c709fbdf25e3c1b ]
Use more generic names (as recommended in the device tree specification
or the binding documentation)
Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20210417112952.8516-7-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Elaine Zhang [Sat, 17 Apr 2021 11:29:42 +0000 (13:29 +0200)]
arm64: dts: rockchip: Fix power-controller node names for px30
[ Upstream commit
d5de0d688ac6e0202674577b05d0726b8a6af401 ]
Use more generic names (as recommended in the device tree specification
or the binding documentation)
Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20210417112952.8516-6-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Elaine Zhang [Sat, 17 Apr 2021 11:29:40 +0000 (13:29 +0200)]
ARM: dts: rockchip: Fix power-controller node names for rk3288
[ Upstream commit
970cdc53cb1afa73602028c103dbfb6a230080be ]
Use more generic names (as recommended in the device tree specification
or the binding documentation)
Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20210417112952.8516-4-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Elaine Zhang [Sat, 17 Apr 2021 11:29:39 +0000 (13:29 +0200)]
ARM: dts: rockchip: Fix power-controller node names for rk3188
[ Upstream commit
d3bcbcd396175ac26aa54919c0b31c7d2878fc24 ]
Use more generic names (as recommended in the device tree specification
or the binding documentation)
Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20210417112952.8516-3-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Elaine Zhang [Sat, 17 Apr 2021 11:29:38 +0000 (13:29 +0200)]
ARM: dts: rockchip: Fix power-controller node names for rk3066a
[ Upstream commit
f2948781a72f0d8cf2adf31758c357f2f35e6c79 ]
Use more generic names (as recommended in the device tree specification
or the binding documentation)
Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20210417112952.8516-2-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Benjamin Gaignard [Fri, 7 May 2021 09:02:29 +0000 (11:02 +0200)]
ARM: dts: rockchip: Fix IOMMU nodes properties on rk322x
[ Upstream commit
6b023929666f0be5df75f5e0278d1b70effadf42 ]
Add '#" to iommu-cells properties.
Remove useless interrupt-names properties
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Link: https://lore.kernel.org/r/20210507090232.233049-4-benjamin.gaignard@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ezequiel Garcia [Thu, 6 May 2021 11:11:35 +0000 (08:11 -0300)]
ARM: dts: rockchip: Fix the timer clocks order
[ Upstream commit
7b46d674ac000b101fdad92cf16cc11d90b72f86 ]
Fixed order is the device-tree convention.
The timer driver currently gets clocks by name,
so no changes are needed there.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Link: https://lore.kernel.org/r/20210506111136.3941-3-ezequiel@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Johan Jonker [Tue, 26 Jan 2021 11:02:21 +0000 (12:02 +0100)]
arm64: dts: rockchip: fix pinctrl sleep nodename for rk3399.dtsi
[ Upstream commit
a7ecfad495f8af63a5cb332c91f60ab2018897f5 ]
A test with the command below aimed at powerpc generates
notifications in the Rockchip arm64 tree.
Fix pinctrl "sleep" nodename by renaming it to "suspend"
for rk3399.dtsi
make ARCH=arm64 dtbs_check
DT_SCHEMA_FILES=Documentation/devicetree/bindings/powerpc/sleep.yaml
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20210126110221.10815-2-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Johan Jonker [Tue, 26 Jan 2021 11:02:20 +0000 (12:02 +0100)]
ARM: dts: rockchip: fix pinctrl sleep nodename for rk3036-kylin and rk3288
[ Upstream commit
dfbfb86a43f9a5bbd166d88bca9e07ee4e1bff31 ]
A test with the command below aimed at powerpc generates
notifications in the Rockchip ARM tree.
Fix pinctrl "sleep" nodename by renaming it to "suspend"
for rk3036-kylin and rk3288
make ARCH=arm dtbs_check
DT_SCHEMA_FILES=Documentation/devicetree/bindings/powerpc/sleep.yaml
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20210126110221.10815-1-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Corentin Labbe [Mon, 3 May 2021 18:52:28 +0000 (18:52 +0000)]
ARM: dts: gemini: add device_type on pci
[ Upstream commit
483f3645b3f7acfd1c78a19d51b80c0656161974 ]
Fixes DT warning on pci node by adding the missing device_type.
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Corentin Labbe [Wed, 28 Apr 2021 17:48:30 +0000 (17:48 +0000)]
ARM: dts: gemini: rename mdio to the right name
[ Upstream commit
fc5b59b945b546e27977e99a5ca6fe61179ff0d2 ]
ethernet-phy is not the right name for mdio, fix it.
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Greg Kroah-Hartman [Tue, 20 Jul 2021 14:10:54 +0000 (16:10 +0200)]
Linux 5.4.134
Link: https://lore.kernel.org/r/20210719144901.370365147@linuxfoundation.org
Link: https://lore.kernel.org/r/20210719184316.974243081@linuxfoundation.org
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Sandeen [Tue, 13 Jul 2021 15:49:23 +0000 (17:49 +0200)]
seq_file: disallow extremely large seq buffer allocations
commit
8cae8cd89f05f6de223d63e6d15e31c8ba9cf53b upstream.
There is no reasonable need for a buffer larger than this, and it avoids
int overflow pitfalls.
Fixes: 058504edd026 ("fs/seq_file: fallback to vmalloc allocation")
Suggested-by: Al Viro <viro@zeniv.linux.org.uk>
Reported-by: Qualys Security Advisory <qsa@qualys.com>
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tong Zhang [Sat, 22 May 2021 04:37:25 +0000 (00:37 -0400)]
misc: alcor_pci: fix inverted branch condition
commit
281e468446994a7672733af2bf941f4110d4a895 upstream.
This patch fixes a trivial mistake that I made in the previous attempt
in fixing the null bridge issue. The branch condition is inverted and we
should call alcor_pci_find_cap_offset() only if bridge is not null.
Reported-by: Colin Ian King <colin.king@canonical.com>
Fixes: 3ce3e45cc333 ("misc: alcor_pci: fix null-ptr-deref when there is no PCI bridge")
Signed-off-by: Tong Zhang <ztong0001@gmail.com>
Link: https://lore.kernel.org/r/20210522043725.602179-1-ztong0001@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dan Carpenter [Thu, 3 Jun 2021 12:33:20 +0000 (15:33 +0300)]
scsi: scsi_dh_alua: Fix signedness bug in alua_rtpg()
commit
80927822e8b6be46f488524cd7d5fe683de97fc4 upstream.
The "retval" variable needs to be signed for the error handling to work.
Link: https://lore.kernel.org/r/YLjMEAFNxOas1mIp@mwanda
Fixes: 7e26e3ea0287 ("scsi: scsi_dh_alua: Check for negative result value")
Reviewed-by: Martin Wilck <mwilck@suse.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Martin Fäcknitz [Mon, 5 Jul 2021 00:03:54 +0000 (02:03 +0200)]
MIPS: vdso: Invalid GIC access through VDSO
[ Upstream commit
47ce8527fbba145a7723685bc9a27d9855e06491 ]
Accessing raw timers (currently only CLOCK_MONOTONIC_RAW) through VDSO
doesn't return the correct time when using the GIC as clock source.
The address of the GIC mapped page is in this case not calculated
correctly. The GIC mapped page is calculated from the VDSO data by
subtracting PAGE_SIZE:
void *get_gic(const struct vdso_data *data) {
return (void __iomem *)data - PAGE_SIZE;
}
However, the data pointer is not page aligned for raw clock sources.
This is because the VDSO data for raw clock sources (CS_RAW = 1) is
stored after the VDSO data for coarse clock sources (CS_HRES_COARSE = 0).
Therefore, only the VDSO data for CS_HRES_COARSE is page aligned:
+--------------------+
| |
| vd[CS_RAW] | ---+
| vd[CS_HRES_COARSE] | |
+--------------------+ | -PAGE_SIZE
| | |
| GIC mapped page | <--+
| |
+--------------------+
When __arch_get_hw_counter() is called with &vd[CS_RAW], get_gic returns
the wrong address (somewhere inside the GIC mapped page). The GIC counter
values are not returned which results in an invalid time.
Fixes: a7f4df4e21dd ("MIPS: VDSO: Add implementations of gettimeofday() and clock_gettime()")
Signed-off-by: Martin Fäcknitz <faecknitz@hotsplots.de>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Randy Dunlap [Sun, 4 Jul 2021 23:02:11 +0000 (16:02 -0700)]
mips: disable branch profiling in boot/decompress.o
[ Upstream commit
97e488073cfca0eea84450169ca4cbfcc64e33e3 ]
Use DISABLE_BRANCH_PROFILING for arch/mips/boot/compressed/decompress.o
to prevent linkage errors.
mips64-linux-ld: arch/mips/boot/compressed/decompress.o: in function `LZ4_decompress_fast_extDict':
decompress.c:(.text+0x8c): undefined reference to `ftrace_likely_update'
mips64-linux-ld: decompress.c:(.text+0xf4): undefined reference to `ftrace_likely_update'
mips64-linux-ld: decompress.c:(.text+0x200): undefined reference to `ftrace_likely_update'
mips64-linux-ld: decompress.c:(.text+0x230): undefined reference to `ftrace_likely_update'
mips64-linux-ld: decompress.c:(.text+0x320): undefined reference to `ftrace_likely_update'
mips64-linux-ld: arch/mips/boot/compressed/decompress.o:decompress.c:(.text+0x3f4): more undefined references to `ftrace_likely_update' follow
Fixes: e76e1fdfa8f8 ("lib: add support for LZ4-compressed kernel")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: linux-mips@vger.kernel.org
Cc: Kyungsik Lee <kyungsik.lee@lge.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Arnd Bergmann [Fri, 2 Jul 2021 14:28:37 +0000 (16:28 +0200)]
mips: always link byteswap helpers into decompressor
[ Upstream commit
cddc40f5617e53f97ef019d5b29c1bd6cbb031ec ]
My series to clean up the unaligned access implementation
across architectures caused some mips randconfig builds to
fail with:
mips64-linux-ld: arch/mips/boot/compressed/decompress.o: in function `decompress_kernel':
decompress.c:(.text.decompress_kernel+0x54): undefined reference to `__bswapsi2'
It turns out that this problem has already been fixed for the XZ
decompressor but now it also shows up in (at least) LZO and LZ4. From my
analysis I concluded that the compiler could always have emitted those
calls, but the different implementation allowed it to make otherwise
better decisions about not inlining the byteswap, which results in the
link error when the out-of-line code is missing.
While it could be addressed by adding it to the two decompressor
implementations that are known to be affected, but as this only adds
112 bytes to the kernel, the safer choice is to always add them.
Fixes: c50ec6787536 ("MIPS: zboot: Fix the build with XZ compression on older GCC versions")
Fixes: 0652035a5794 ("asm-generic: unaligned: remove byteshift helpers")
Link: https://lore.kernel.org/linux-mm/202106301304.gz2wVY9w-lkp@intel.com/
Link: https://lore.kernel.org/linux-mm/202106260659.TyMe8mjr-lkp@intel.com/
Link: https://lore.kernel.org/linux-mm/202106172016.onWT6Tza-lkp@intel.com/
Link: https://lore.kernel.org/linux-mm/202105231743.JJcALnhS-lkp@intel.com/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Christophe JAILLET [Sat, 12 Jun 2021 07:18:34 +0000 (09:18 +0200)]
scsi: be2iscsi: Fix an error handling path in beiscsi_dev_probe()
[ Upstream commit
030e4138d11fced3b831c2761e4cecf347bae99c ]
If an error occurs after a pci_enable_pcie_error_reporting() call, it must
be undone by a corresponding pci_disable_pcie_error_reporting() call, as
already done in the remove function.
Link: https://lore.kernel.org/r/77adb02cfea7f1364e5603ecf3930d8597ae356e.1623482155.git.christophe.jaillet@wanadoo.fr
Fixes: 3567f36a09d1 ("[SCSI] be2iscsi: Fix AER handling in driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Pali Rohár [Thu, 20 May 2021 11:35:19 +0000 (13:35 +0200)]
firmware: turris-mox-rwtm: fail probing when firmware does not support hwrng
[ Upstream commit
2eab59cf0d2036a5a9e264f719b71c21ccf679c2 ]
When Marvell's rWTM firmware, which does not support the GET_RANDOM
command, is used, kernel prints an error message
hwrng: no data available
every 10 seconds.
Fail probing of this driver if the rWTM firmware does not support the
GET_RANDOM command.
Fixes: 389711b37493 ("firmware: Add Turris Mox rWTM firmware driver")
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Marek Behún [Thu, 20 May 2021 11:35:18 +0000 (13:35 +0200)]
firmware: turris-mox-rwtm: report failures better
[ Upstream commit
72f99888944c44de1c899bbe44db1e53bdc9d994 ]
Report a notice level message if a command is not supported by the rWTM
firmware.
This should not be an error, merely a notice, because the firmware can
be used on boards that do not have manufacturing information burned.
Fixes: 389711b37493 ("firmware: Add Turris Mox rWTM firmware driver")
Signed-off-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Marek Behún [Thu, 20 May 2021 11:35:17 +0000 (13:35 +0200)]
firmware: turris-mox-rwtm: fix reply status decoding function
[ Upstream commit
e34e60253d9272311831daed8a2d967cf80ca3dc ]
The status decoding function mox_get_status() currently contains an
incorrect check: if the error status is not MBOX_STS_SUCCESS, it always
returns -EIO, so the comparison to MBOX_STS_FAIL is never executed and
we don't get the actual error code sent by the firmware.
Fix this.
Signed-off-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Fixes: 389711b37493 ("firmware: Add Turris Mox rWTM firmware driver")
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
projects / wrapfs-5.10.y.git / log