Input: serio - fix blocking of parport

[ Upstream commit 1a5e251996e1b602f2ddc9261ee9de0ca1875bfa ]

If parkbd_allocate_serio() fails to allocate memory we are releasing the
parport but we missed unregistering the device. As a result this device
with exclusive access to that parport remains registered. And no other
device will be able to use that parport even though this driver has
failed to load.

Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

Input: psmouse - add small delay for IBM trackpoint pass-through mode

[ Upstream commit 66bc2f51ef7deabc8b8f3baa98ae64b65e5e973a ]

There are trackpoint devices that fail to respond to the PS2 command
PSMOUSE_CMD_GETID if immediately queried after the parent device is
deactivated. Add a small delay for the hardware to get in a sane state
before sending any PS2 commands.

One example of such a system is:
Lenovo ThinkPad X120e, model 30515QG
synaptics: Touchpad model: 1, fw: 8.0, id: 0x1e2b1, caps: 0xd001a3/0x940300/0x121c00, board id: 1811, fw id: 797391

Signed-off-by: Stefan Assmann <sassmann@kpanic.de>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

HID: quirks: add QUIRK_NOGET for an other TPV touchscreen

[ Upstream commit c9b57724b38d4c1555ee49418be3d76801e3327c ]

Looks like 0x8882 needs the same quirk than 0x8883.
Given that both devices claim they are "TPV OpticalTouchScreen" rename
the 0x8883 to add its PID in the #define.

Reported-by: Blaine Lee <blaine.j.lee@medtronic.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

HID: apple: Add support for the 2015 Macbook Pro

[ Upstream commit a4a2c54560f2c57b88ba0283f141b44f594c2337 ]

This patch adds keyboard support for MacbookPro12,1 as WELLSPRING9
(0x0272, 0x0273, 0x0274). The touchpad is handled in a separate
bcm5974 patch, as usual.

Tested-by: John Horan <knasher@gmail.com>
Tested-by: Jochen Radmacher <jradmacher@gmx.de>
Tested-by: Yang Hongyang <burnef@gmail.com>
Tested-by: Yen-Chin, Lee <coldnew.tw@gmail.com>
Tested-by: George Hilios <ghilios@gmail.com>
Tested-by: Janez Urevc <janez@janezurevc.name>
Signed-off-by: Henrik Rydberg <rydberg@bitmath.org>
Acked-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

usb: musb: fix cppi channel teardown for isoch transfer

[ Upstream commit b431ba8803666e56c1d178a421b3cbc36e8d3d33 ]

After a few iterations of start/stop UVC camera streaming, the streaming
stops.

This patch adds 250us delay in the cppi channel abort path to let cppi
drain properly.

Using 50us delay seems to be too aggressive, some webcams are still
broken. 250us is the original value used in TI 3.2 kernel.

Signed-off-by: Bin Liu <b-liu@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

usb: musb: cppi41: improve rx channel abort routine

[ Upstream commit cb83df77f3ec151d68a1b6be957207e6fc7b7f50 ]

1. set AUTOREQ to NONE at the beginning of teardown;

2. add delay for dma pipeline to drain;

3. Do not set USB_TDOWN bit for RX teardown.

  The CPPI hw has an issue that when tearing down a RX channel, if
  another RX channel is receiving data, the CPPI will lockup.

  To workaround the issue, do not set the CPPI TD bit. The steps before
  this point ensures the CPPI channel will be torn down properly.

Signed-off-by: Bin Liu <b-liu@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

USB: symbolserial: Correct transferred data size

[ Upstream commit 8ae25a355b5969e12f3185e8cb8eb08b871c9084 ]

The scanner (here DS3508) always returns 64 bytes per urb buffer. The first
byte indicates the data length used in the current buffer. There even was
a comment describing this. But the comment also said that we'll send
everything in the buffer to the tty layer. That means sending the actual
barcode data and lots of trailing zeroes. This patch lets the driver only
send the real data.

Signed-off-by: Philipp Hachtmann <hachti@hachti.de>
Acked-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

usb: chipidea: debug: add runtime pm for register access

[ Upstream commit bc24937943d9f71a1e32b5dc4e2f0ef8fcc07b64 ]

Add runtime pm operations for registers access to avoid system hang.

Signed-off-by: Li Jun <jun.li@freescale.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

s390/3270: redraw screen on unsolicited device end

[ Upstream commit 05bfd70bcdd3cd12c061cb77b73a11ba6f87379d ]

If a 3270 terminal is disconnected and later reconnected again,
it gets an unsolicited device end. This is currently ignored and
you have to hit the clear key to get the screen redrawn.
Add an automatic full redraw of the screen for this case.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

iommu/amd: Handle integer overflow in dma_ops_area_alloc

[ Upstream commit e6aabee05f41c9d18e0b92194819edd84f352ac9 ]

Handle this case to make sure boundary_size does not become
0 and trigger a BUG_ON later.

Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

client MUST ignore EncryptionKeyLength if CAP_EXTENDED_SECURITY is set

[ Upstream commit f291095f340db986271e951e3891bb95624a93ea ]

[MS-SMB] 2.2.4.5.2.1 states:

"ChallengeLength (1 byte): When the CAP_EXTENDED_SECURITY bit is set,
 the server MUST set this value to zero and clients MUST ignore this
 value."

Signed-off-by: Noel Power <noel.power@suse.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

USB: usbtmc: add device quirk for Rigol DS6104

[ Upstream commit f50420223071b6ff4b586308f5c27eec54694a81 ]

Recently we purchased the Rigol DS6104 and when I try to operate it from
my Linux pc, everything works well with the default usbtmc driver,
except when I want to download a big datachunk like a screenshot. This
bitmapfile has a size of 1152054 bytes but I receive a smaller file and
no new packets can be read.

When I took a look at the driver source, I found this "Rigol quirk" and
I added the id of the new DS series oscilloscopes to this list. I
compiled it and loaded the new driver and now everything seems to work
fine.

Signed-off-by: Teunis van Beelen <teuniz@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

sched: Fix cpu_active_mask/cpu_online_mask race

[ Upstream commit dd9d3843755da95f63dd3a376f62b3e45c011210 ]

There is a race condition in SMP bootup code, which may result
in

    WARNING: CPU: 0 PID: 1 at kernel/workqueue.c:4418
    workqueue_cpu_up_callback()
or
    kernel BUG at kernel/smpboot.c:135!

It can be triggered with a bit of luck in Linux guests running
on busy hosts.

CPU0                        CPUn
====                        ====

_cpu_up()
  __cpu_up()
    start_secondary()
      set_cpu_online()
cpumask_set_cpu(cpu,
   to_cpumask(cpu_online_bits));
  cpu_notify(CPU_ONLINE)
    <do stuff, see below>
cpumask_set_cpu(cpu,
   to_cpumask(cpu_active_bits));

During the various CPU_ONLINE callbacks CPUn is online but not
active. Several things can go wrong at that point, depending on
the scheduling of tasks on CPU0.

Variant 1:

  cpu_notify(CPU_ONLINE)
    workqueue_cpu_up_callback()
      rebind_workers()
        set_cpus_allowed_ptr()

  This call fails because it requires an active CPU; rebind_workers()
  ends with a warning:

    WARNING: CPU: 0 PID: 1 at kernel/workqueue.c:4418
    workqueue_cpu_up_callback()

Variant 2:

  cpu_notify(CPU_ONLINE)
    smpboot_thread_call()
      smpboot_unpark_threads()
       ..
        __kthread_unpark()
          __kthread_bind()
          wake_up_state()
           ..
            select_task_rq()
              select_fallback_rq()

  The ->wake_cpu of the unparked thread is not allowed, making a call
  to select_fallback_rq() necessary. Then, select_fallback_rq() cannot
  find an allowed, active CPU and promptly resets the allowed CPUs, so
  that the task in question ends up on CPU0.

  When those unparked tasks are eventually executed, they run
  immediately into a BUG:

    kernel BUG at kernel/smpboot.c:135!

Just changing the order in which the online/active bits are set
(and adding some memory barriers), would solve the two issues
above. However, it would change the order of operations back to
the one before commit 6acbfb96976f ("sched: Fix hotplug vs.
set_cpus_allowed_ptr()"), thus, reintroducing that particular
problem.

Going further back into history, we have at least the following
commits touching this topic:
- commit 2baab4e90495 ("sched: Fix select_fallback_rq() vs cpu_active/cpu_online")
- commit 5fbd036b552f ("sched: Cleanup cpu_active madness")

Together, these give us the following non-working solutions:

  - secondary CPU sets active before online, because active is assumed to
    be a subset of online;

  - secondary CPU sets online before active, because the primary CPU
    assumes that an online CPU is also active;

  - secondary CPU sets online and waits for primary CPU to set active,
    because it might deadlock.

Commit 875ebe940d77 ("powerpc/smp: Wait until secondaries are
active & online") introduces an arch-specific solution to this
arch-independent problem.

Now, go for a more general solution without explicit waiting and
simply set active twice: once on the secondary CPU after online
was set and once on the primary CPU after online was seen.

set_cpus_allowed_ptr()")

Signed-off-by: Jan H. Schönherr <jschoenh@amazon.de>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: <stable@vger.kernel.org>
Cc: Anton Blanchard <anton@samba.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Joerg Roedel <jroedel@suse.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matt Wilson <msw@amazon.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 6acbfb96976f ("sched: Fix hotplug vs. set_cpus_allowed_ptr()")
Link: http://lkml.kernel.org/r/1439408156-18840-1-git-send-email-jschoenh@amazon.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

PCI: Add VPD function 0 quirk for Intel Ethernet devices

[ Upstream commit 7aa6ca4d39edf01f997b9e02cf6d2fdeb224f351 ]

Set the PCI_DEV_FLAGS_VPD_REF_F0 flag on all Intel Ethernet device
functions other than function 0, so that on multi-function devices, we will
always read VPD from function 0 instead of from the other functions.

[bhelgaas: changelog]
Signed-off-by: Mark Rustad <mark.d.rustad@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Alexander Duyck <alexander.h.duyck@redhat.com>
CC: stable@vger.kernel.org
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

PCI: Add dev_flags bit to access VPD through function 0

[ Upstream commit 91a37c794cf2cf7ec1f9afc4cbf4a118df7e085e ]

commit 932c435caba8a2ce473a91753bad0173269ef334 upstream.

Add a dev_flags bit, PCI_DEV_FLAGS_VPD_REF_F0, to access VPD through
function 0 to provide VPD access on other functions.  This is for hardware
devices that provide copies of the same VPD capability registers in
multiple functions.  Because the kernel expects that each function has its
own registers, both the locking and the state tracking are affected by VPD
accesses to different functions.

On such devices for example, if a VPD write is performed on function 0,
*any* later attempt to read VPD from any other function of that device will
hang.  This has to do with how the kernel tracks the expected value of the
F bit per function.

Concurrent accesses to different functions of the same device can not only
hang but also corrupt both read and write VPD data.

When hangs occur, typically the error message:

  vpd r/w failed.  This is likely a firmware bug on this device.

will be seen.

Never set this bit on function 0 or there will be an infinite recursion.

Signed-off-by: Mark Rustad <mark.d.rustad@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Alexander Duyck <alexander.h.duyck@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

PCI: Add flag for devices that don't reset on D3hot->D0 transition

[ Upstream commit 51e537387990dc1f00752103f314fd135cb94bc6 ]

Per the PCI Power Management spec r1.2, sec 3.2.4, a device that advertises
No_Soft_Reset == 0 in the PMCSR register (reported by lspci as "NoSoftRst-")
should perform an internal reset when transitioning from D3hot to D0 via
software control.  Configuration context is lost and the device requires a
full reinitialization sequence.

Unfortunately the definition of "internal reset", beyond the application of
the configuration context, is largely left to the interpretation of the
specific device.  Some devices don't seem to perform an "internal reset"
even if they report No_Soft_Reset == 0.

We still need to honor the PCI specification and restore PCI config context
in the event that we do a PM reset, so we don't cache and modify the
PCI_PM_CTRL_NO_SOFT_RESET bit for the device, but for interfaces where the
intention is to reset the device, like pci_reset_function(), we need a
mechanism to flag that PM reset (a D3hot->D0 transition) doesn't perform
any significant "internal reset" of the device.

Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

KEYS: Fix crash when attempt to garbage collect an uninstantiated keyring

[ Upstream commit f05819df10d7b09f6d1eb6f8534a8f68e5a4fe61 ]

The following sequence of commands:

    i=`keyctl add user a a @s`
    keyctl request2 keyring foo bar @t
    keyctl unlink $i @s

tries to invoke an upcall to instantiate a keyring if one doesn't already
exist by that name within the user's keyring set.  However, if the upcall
fails, the code sets keyring->type_data.reject_error to -ENOKEY or some
other error code.  When the key is garbage collected, the key destroy
function is called unconditionally and keyring_destroy() uses list_empty()
on keyring->type_data.link - which is in a union with reject_error.
Subsequently, the kernel tries to unlink the keyring from the keyring names
list - which oopses like this:

BUG: unable to handle kernel paging request at 00000000ffffff8a
IP: [<ffffffff8126e051>] keyring_destroy+0x3d/0x88
...
Workqueue: events key_garbage_collector
...
RIP: 0010:[<ffffffff8126e051>] keyring_destroy+0x3d/0x88
RSP: 0018:ffff88003e2f3d30  EFLAGS: 00010203
RAX: 00000000ffffff82 RBX: ffff88003bf1a900 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 000000003bfc6901 RDI: ffffffff81a73a40
RBP: ffff88003e2f3d38 R08: 0000000000000152 R09: 0000000000000000
R10: ffff88003e2f3c18 R11: 000000000000865b R12: ffff88003bf1a900
R13: 0000000000000000 R14: ffff88003bf1a908 R15: ffff88003e2f4000
...
CR2: 00000000ffffff8a CR3: 000000003e3ec000 CR4: 00000000000006f0
...
Call Trace:
 [<ffffffff8126c756>] key_gc_unused_keys.constprop.1+0x5d/0x10f
 [<ffffffff8126ca71>] key_garbage_collector+0x1fa/0x351
 [<ffffffff8105ec9b>] process_one_work+0x28e/0x547
 [<ffffffff8105fd17>] worker_thread+0x26e/0x361
 [<ffffffff8105faa9>] ? rescuer_thread+0x2a8/0x2a8
 [<ffffffff810648ad>] kthread+0xf3/0xfb
 [<ffffffff810647ba>] ? kthread_create_on_node+0x1c2/0x1c2
 [<ffffffff815f2ccf>] ret_from_fork+0x3f/0x70
 [<ffffffff810647ba>] ? kthread_create_on_node+0x1c2/0x1c2

Note the value in RAX.  This is a 32-bit representation of -ENOKEY.

The solution is to only call ->destroy() if the key was successfully
instantiated.

Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

KEYS: Fix race between key destruction and finding a keyring by name

[ Upstream commit 94c4554ba07adbdde396748ee7ae01e86cf2d8d7 ]

There appears to be a race between:

 (1) key_gc_unused_keys() which frees key->security and then calls
     keyring_destroy() to unlink the name from the name list

 (2) find_keyring_by_name() which calls key_permission(), thus accessing
     key->security, on a key before checking to see whether the key usage is 0
     (ie. the key is dead and might be cleaned up).

Fix this by calling ->destroy() before cleaning up the core key data -
including key->security.

Reported-by: Petr Matousek <pmatouse@redhat.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

ext4: fix loss of delalloc extent info in ext4_zero_range()

[ Upstream commit 94426f4b9648154dc5a6760b59e6953e640ab3b1 ]

In ext4_zero_range(), removing a file's entire block range from the
extent status tree removes all records of that file's delalloc extents.
The delalloc accounting code uses this information, and its loss can
then lead to accounting errors and kernel warnings at writeback time and
subsequent file system damage.  This is most noticeable on bigalloc
file systems where code in ext4_ext_map_blocks() handles cases where
delalloc extents share clusters with a newly allocated extent.

Because we're not deleting a block range and are correctly updating the
status of its associated extent, there is no need to remove anything
from the extent status tree.

When this patch is combined with an unrelated bug fix for
ext4_zero_range(), kernel warnings and e2fsck errors reported during
xfstests runs on bigalloc filesystems are greatly reduced without
introducing regressions on other xfstests-bld test scenarios.

Signed-off-by: Eric Whitney <enwlinux@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

ext4: allocate entire range in zero range

[ Upstream commit 0f2af21aae11972fa924374ddcf52e88347cf5a8 ]

Currently there is a bug in zero range code which causes zero range
calls to only allocate block aligned portion of the range, while
ignoring the rest in some cases.

In some cases, namely if the end of the range is past i_size, we do
attempt to preallocate the last nonaligned block. However this might
cause kernel to BUG() in some carefully designed zero range requests
on setups where page size > block size.

Fix this problem by first preallocating the entire range, including
the nonaligned edges and converting the written extents to unwritten
in the next step. This approach will also give us the advantage of
having the range to be as linearly contiguous as possible.

Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

vhost/scsi: potential memory corruption

[ Upstream commit 59c816c1f24df0204e01851431d3bab3eb76719c ]

This code in vhost_scsi_make_tpg() is confusing because we limit "tpgt"
to UINT_MAX but the data type of "tpg->tport_tpgt" and that is a u16.

I looked at the context and it turns out that in
vhost_scsi_set_endpoint(), "tpg->tport_tpgt" is used as an offset into
the vs_tpg[] array which has VHOST_SCSI_MAX_TARGET (256) elements so
anything higher than 255 then it is invalid.  I have made that the limit
now.

In vhost_scsi_send_evt() we mask away values higher than 255, but now
that the limit has changed, we don't need the mask.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

serial: 8250_pci: Add support for 12 port Exar boards

[ Upstream commit be32c0cf0462c36f482b5ddcff1d8371be1e183c ]

The Exar XR17V358 can also be combined with a XR17V354 chip to act as a
single 12 port chip. This works the same way as the combining two XR17V358
chips. But the reported device id then is 0x4358.

Signed-off-by: Soeren Grunewald <soeren.grunewald@desy.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

serial: 8250_pci: Add support for 16 port Exar boards

[ Upstream commit 96a5d18bc1338786fecac73599f1681f59a59a8e ]

The Exar XR17V358 chip usually provides only 8 ports. But two chips can be
combined to act as a single 16 port chip. Therefor one chip is configured
as master the second as slave by connecting the mode pin to VCC (master)
or GND (slave).

Then the master chip is reporting a different device-id depending on
whether a slave is detected or not. The UARTs 8-15 are addressed from
0x2000-0x3fff. So the offset of 0x400 from UART to UART can be used to
address all 16 ports as before.

See: https://www.exar.com/common/content/document.ashx?id=1587 page 11

Signed-off-by: Soeren Grunewald <soeren.grunewald@desy.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

md/raid5: fix locking in handle_stripe_clean_event()

[ Upstream commit b8a9d66d043ffac116100775a469f05f5158c16f ]

After commit 566c09c53455 ("raid5: relieve lock contention in get_active_stripe()")
__find_stripe() is called under conf->hash_locks + hash.
But handle_stripe_clean_event() calls remove_hash() under
conf->device_lock.

Under some cirscumstances the hash chain can be circuited,
and we get an infinite loop with disabled interrupts and locked hash
lock in __find_stripe(). This leads to hard lockup on multiple CPUs
and following system crash.

I was able to reproduce this behavior on raid6 over 6 ssd disks.
The devices_handle_discard_safely option should be set to enable trim
support. The following script was used:

for i in `seq 1 32`; do
    dd if=/dev/zero of=large$i bs=10M count=100 &
done

neilb: original was against a 3.x kernel.  I forward-ported
  to 4.3-rc.  This verison is suitable for any kernel since
  Commit: 59fc630b8b5f ("RAID5: batch adjacent full stripe write")
  (v4.1+).  I'll post a version for earlier kernels to stable.

Signed-off-by: Roman Gushchin <klamm@yandex-team.ru>
Fixes: 566c09c53455 ("raid5: relieve lock contention in get_active_stripe()")
Signed-off-by: NeilBrown <neilb@suse.com>
Cc: Shaohua Li <shli@kernel.org>
Cc: <stable@vger.kernel.org> # 3.13 - 4.2
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

IB/cm: Fix rb-tree duplicate free and use-after-free

[ Upstream commit 0ca81a2840f77855bbad1b9f172c545c4dc9e6a4 ]

ib_send_cm_sidr_rep could sometimes erase the node from the sidr
(depending on errors in the process). Since ib_send_cm_sidr_rep is
called both from cm_sidr_req_handler and cm_destroy_id, cm_id_priv
could be either erased from the rb_tree twice or not erased at all.
Fixing that by making sure it's erased only once before freeing
cm_id_priv.

Fixes: a977049dacde ('[PATCH] IB: Add the kernel CM implementation')
Signed-off-by: Doron Tsur <doront@mellanox.com>
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

mvsas: Fix NULL pointer dereference in mvs_slot_task_free

[ Upstream commit 2280521719e81919283b82902ac24058f87dfc1b ]

When pci_pool_alloc fails in mvs_task_prep then task->lldd_task stays
NULL but it's later used in mvs_abort_task as slot which is passed
to mvs_slot_task_free causing NULL pointer dereference.

Just return from mvs_slot_task_free when passed with NULL slot.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=101891
Signed-off-by: Dāvis Mosāns <davispuh@gmail.com>
Reviewed-by: Tomas Henzl <thenzl@redhat.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Cc: stable@vger.kernel.org
Signed-off-by: James Bottomley <JBottomley@Odin.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

Revert "md: allow a partially recovered device to be hot-added to an array."

[ Upstream commit d01552a76d71f9879af448e9142389ee9be6e95b ]

This reverts commit 7eb418851f3278de67126ea0c427641ab4792c57.

This commit is poorly justified, I can find not discusison in email,
and it clearly causes a problem.

If a device which is being recovered fails and is subsequently
re-added to an array, there could easily have been changes to the
array *before* the point where the recovery was up to.  So the
recovery must start again from the beginning.

If a spare is being recovered and fails, then when it is re-added we
really should do a bitmap-based recovery up to the recovery-offset,
and then a full recovery from there.  Before this reversion, we only
did the "full recovery from there" which is not corect.  After this
reversion with will do a full recovery from the start, which is safer
but not ideal.

It will be left to a future patch to arrange the two different styles
of recovery.

Reported-and-tested-by: Nate Dailey <nate.dailey@stratus.com>
Signed-off-by: NeilBrown <neilb@suse.com>
Cc: stable@vger.kernel.org (3.14+)
Fixes: 7eb418851f32 ("md: allow a partially recovered device to be hot-added to an array.")
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

md/raid10: submit_bio_wait() returns 0 on success

[ Upstream commit 681ab4696062f5aa939c9e04d058732306a97176 ]

This was introduced with 9e882242c6193ae6f416f2d8d8db0d9126bd996b
which changed the return value of submit_bio_wait() to return != 0 on
error, but didn't update the caller accordingly.

Fixes: 9e882242c6 ("block: Add submit_bio_wait(), remove from md")
Cc: stable@vger.kernel.org (v3.10)
Reported-by: Bill Kuzeja <William.Kuzeja@stratus.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

md/raid1: submit_bio_wait() returns 0 on success

[ Upstream commit 203d27b0226a05202438ddb39ef0ef1acb14a759 ]

This was introduced with 9e882242c6193ae6f416f2d8d8db0d9126bd996b
which changed the return value of submit_bio_wait() to return != 0 on
error, but didn't update the caller accordingly.

Fixes: 9e882242c6 ("block: Add submit_bio_wait(), remove from md")
Cc: stable@vger.kernel.org (v3.10)
Reported-by: Bill Kuzeja <William.Kuzeja@stratus.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

crypto: api - Only abort operations on fatal signal

[ Upstream commit 3fc89adb9fa4beff31374a4bf50b3d099d88ae83 ]

Currently a number of Crypto API operations may fail when a signal
occurs.  This causes nasty problems as the caller of those operations
are often not in a good position to restart the operation.

In fact there is currently no need for those operations to be
interrupted by user signals at all.  All we need is for them to
be killable.

This patch replaces the relevant calls of signal_pending with
fatal_signal_pending, and wait_for_completion_interruptible with
wait_for_completion_killable, respectively.

Cc: stable@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

module: Fix locking in symbol_put_addr()

[ Upstream commit 275d7d44d802ef271a42dc87ac091a495ba72fc5 ]

Poma (on the way to another bug) reported an assertion triggering:

  [<ffffffff81150529>] module_assert_mutex_or_preempt+0x49/0x90
  [<ffffffff81150822>] __module_address+0x32/0x150
  [<ffffffff81150956>] __module_text_address+0x16/0x70
  [<ffffffff81150f19>] symbol_put_addr+0x29/0x40
  [<ffffffffa04b77ad>] dvb_frontend_detach+0x7d/0x90 [dvb_core]

Laura Abbott <labbott@redhat.com> produced a patch which lead us to
inspect symbol_put_addr(). This function has a comment claiming it
doesn't need to disable preemption around the module lookup
because it holds a reference to the module it wants to find, which
therefore cannot go away.

This is wrong (and a false optimization too, preempt_disable() is really
rather cheap, and I doubt any of this is on uber critical paths,
otherwise it would've retained a pointer to the actual module anyway and
avoided the second lookup).

While its true that the module cannot go away while we hold a reference
on it, the data structure we do the lookup in very much _CAN_ change
while we do the lookup. Therefore fix the comment and add the
required preempt_disable().

Reported-by: poma <pomidorabelisima@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Fixes: a6e6abd575fc ("module: remove module_text_address()")
Cc: stable@kernel.org
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

xen-blkfront: check for null drvdata in blkback_changed (XenbusStateClosing)

[ Upstream commit a54c8f0f2d7df525ff997e2afe71866a1a013064 ]

xen-blkfront will crash if the check to talk_to_blkback()
in blkback_changed()(XenbusStateInitWait) returns an error.
The driver data is freed and info is set to NULL. Later during
the close process via talk_to_blkback's call to xenbus_dev_fatal()
the null pointer is passed to and dereference in blkfront_closing.

CC: stable@vger.kernel.org
Signed-off-by: Cathy Avery <cathy.avery@oracle.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

xhci: Add spurious wakeup quirk for LynxPoint-LP controllers

[ Upstream commit fd7cd061adcf5f7503515ba52b6a724642a839c8 ]

We received several reports of systems rebooting and powering on
after an attempted shutdown. Testing showed that setting
XHCI_SPURIOUS_WAKEUP quirk in addition to the XHCI_SPURIOUS_REBOOT
quirk allowed the system to shutdown as expected for LynxPoint-LP
xHCI controllers. Set the quirk back.

Note that the quirk was originally introduced for LynxPoint and
LynxPoint-LP just for this same reason. See:

commit 638298dc66ea ("xhci: Fix spurious wakeups after S5 on Haswell")

It was later limited to only concern HP machines as it caused
regression on some machines, see both bug and commit:

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=66171
commit 6962d914f317 ("xhci: Limit the spurious wakeup fix only to HP machines")

Later it was discovered that the powering on after shutdown
was limited to LynxPoint-LP (Haswell-ULT) and that some non-LP HP
machine suffered from spontaneous resume from S3 (which should
not be related to the SPURIOUS_WAKEUP quirk at all). An attempt
to fix this then removed the SPURIOUS_WAKEUP flag usage completely.

commit b45abacde3d5 ("xhci: no switching back on non-ULT Haswell")

Current understanding is that LynxPoint-LP (Haswell ULT) machines
need the SPURIOUS_WAKEUP quirk, otherwise they will restart, and
plain Lynxpoint (Haswell) machines may _not_ have the quirk
set otherwise they again will restart.

Signed-off-by: Laura Abbott <labbott@fedoraproject.org>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Oliver Neukum <oneukum@suse.com>
[Added more history to commit message -Mathias]
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

xhci: handle no ping response error properly

[ Upstream commit 3b4739b8951d650becbcd855d7d6f18ac98a9a85 ]

If a host fails to wake up a isochronous SuperSpeed device from U1/U2
in time for a isoch transfer it will generate a "No ping response error"
Host will then move to the next transfer descriptor.

Handle this case in the same way as missed service errors, tag the
current TD as skipped and handle it on the next transfer event.

Cc: stable <stable@vger.kernel.org>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

dm btree: fix leak of bufio-backed block in btree_split_beneath error path

[ Upstream commit 4dcb8b57df3593dcb20481d9d6cf79d1dc1534be ]

btree_split_beneath()'s error path had an outstanding FIXME that speaks
directly to the potential for _not_ cleaning up a previously allocated
bufio-backed block.

Fix this by releasing the previously allocated bufio block using
unlock_block().

Reported-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Acked-by: Joe Thornber <thornber@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

dm btree remove: fix a bug when rebalancing nodes after removal

[ Upstream commit 2871c69e025e8bc507651d5a9cf81a8a7da9d24b ]

Commit 4c7e309340ff ("dm btree remove: fix bug in redistribute3") wasn't
a complete fix for redistribute3().

The redistribute3 function takes 3 btree nodes and shares out the entries
evenly between them.  If the three nodes in total contained
(MAX_ENTRIES * 3) - 1 entries between them then this was erroneously getting
rebalanced as (MAX_ENTRIES - 1) on the left and right, and (MAX_ENTRIES + 1) in
the center.

Fix this issue by being more careful about calculating the target number
of entries for the left and right nodes.

Unit tested in userspace using this program:
https://github.com/jthornber/redistribute3-test/blob/master/redistribute3_t.c

Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

Revert "ARM64: unwind: Fix PC calculation"

[ Upstream commit 9702970c7bd3e2d6fecb642a190269131d4ac16c ]

This reverts commit e306dfd06fcb44d21c80acb8e5a88d55f3d1cf63.

With this patch applied, we were the only architecture making this sort
of adjustment to the PC calculation in the unwinder. This causes
problems for ftrace, where the PC values are matched against the
contents of the stack frames in the callchain and fail to match any
records after the address adjustment.

Whilst there has been some effort to change ftrace to workaround this,
those patches are not yet ready for mainline and, since we're the odd
architecture in this regard, let's just step in line with other
architectures (like arch/arm/) for now.

Cc: <stable@vger.kernel.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

rbd: require stable pages if message data CRCs are enabled

[ Upstream commit bae818ee1577c27356093901a0ea48f672eda514 ]

rbd requires stable pages, as it performs a crc of the page data before
they are send to the OSDs.

But since kernel 3.9 (patch 1d1d1a767206fbe5d4c69493b7e6d2a8d08cc0a0
"mm: only enforce stable page writes if the backing device requires
it") it is not assumed anymore that block devices require stable pages.

This patch sets the necessary flag to get stable pages back for rbd.

In a ceph installation that provides multiple ext4 formatted rbd
devices "bad crc" messages appeared regularly (ca 1 message every 1-2
minutes on every OSD that provided the data for the rbd) in the
OSD-logs before this patch. After this patch this messages are pretty
much gone (only ca 1-2 / month / OSD).

Cc: stable@vger.kernel.org # 3.9+, needs backporting
Signed-off-by: Ronny Hegewald <Ronny.Hegewald@online.de>
[idryomov@gmail.com: require stable pages only in crc case, changelog]
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

iio: mxs-lradc: Fix temperature offset

[ Upstream commit b94e22805a2224061bb263a82b72e09544a5fbb3 ]

0° Kelvin is actually −273.15°C, not -272.15°C. Fix the temperature offset.
Also improve the comment explaining the calculation.

Reported-by: Janusz Użycki <j.uzycki@elpromaelectronics.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Stefan Wahren <stefan.wahren@i2se.com>
Acked-by: Marek Vasut <marex@denx.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

drm/radeon: don't try to recreate sysfs entries on resume

[ Upstream commit 49abb26651167c892393cd9f2ad23df429645ed9 ]

Fixes a harmless error message caused by:
51a4726b04e880fdd9b4e0e58b13f70b0a68a7f5

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

drm/i915: Restore lost DPLL register write on gen2-4

[ Upstream commit 8e7a65aa70bcc1235a44e40ae0da5056525fe081 ]

We accidentally lost the initial DPLL register write in
1c4e02746147 drm/i915: Fix DVO 2x clock enable on 830M

The "three times for luck" hack probably saved us from a total
disaster. But anyway, bring the initial write back so that the
code actually makes some sense.

Reported-and-tested-by: Nick Bowler <nbowler@draconx.ca>
References: http://mid.gmane.org/CAN_QmVyMaArxYgEcVVsGvsMo7-6ohZr8HmF5VhkkL4i9KOmrhw@mail.gmail.com
Cc: stable@vger.kernel.org
Cc: Nick Bowler <nbowler@draconx.ca>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

drm/nouveau/gem: return only valid domain when there's only one

[ Upstream commit 2a6c521bb41ce862e43db46f52e7681d33e8d771 ]

On nv50+, we restrict the valid domains to just the one where the buffer
was originally created. However after the buffer is evicted to system
memory, we might move it back to a different domain that was not
originally valid. When sharing the buffer and retrieving its GEM_INFO
data, we still want the domain that will be valid for this buffer in a
pushbuf, not the one where it currently happens to be.

This resolves fdo#92504 and several others. These are due to suspend
evicting all buffers, making it more likely that they temporarily end up
in the wrong place.

Cc: stable@vger.kernel.org
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=92504
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

power: bq24190_charger: suppress build warning

[ Upstream commit 31f50e48e3e4ea9d503285a389d6a1b5349d66c0 ]

This patch fixes following build warning:

In file included from include/linux/printk.h:261:0,
                 from include/linux/kernel.h:13,
                 from include/linux/list.h:8,
                 from include/linux/module.h:9,
                 from drivers/power/bq24190_charger.c:11:
drivers/power/bq24190_charger.c: In function ‘bq24190_irq_handler_thread’:
include/linux/dynamic_debug.h:86:20: warning: ‘ss_reg’ may be used uninitialized in this function [-Wmaybe-uninitialized]
   __dynamic_dev_dbg(&descriptor, dev, fmt, \
                    ^
drivers/power/bq24190_charger.c:1211:5: note: ‘ss_reg’ was declared here
  u8 ss_reg, f_reg;
     ^
In file included from include/linux/printk.h:261:0,
                 from include/linux/kernel.h:13,
                 from include/linux/list.h:8,
                 from include/linux/module.h:9,
                 from drivers/power/bq24190_charger.c:11:
include/linux/dynamic_debug.h:86:20: warning: ‘f_reg’ may be used uninitialized in this function [-Wmaybe-uninitialized]
   __dynamic_dev_dbg(&descriptor, dev, fmt, \
                    ^
drivers/power/bq24190_charger.c:1211:13: note: ‘f_reg’ was declared here
  u8 ss_reg, f_reg;

Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

sfc: Fix memcpy() with const destination compiler warning.

[ Upstream commit 1d20a16062e771b6e26b843c0cde3b17c1146e00 ]

drivers/net/ethernet/sfc/selftest.c: In function ‘efx_iterate_state’:
drivers/net/ethernet/sfc/selftest.c:388:9: warning: passing argument 1 of ‘memcpy’ discards ‘const’ qualifier from pointer target type [-Wdiscarded-array-qualifiers]

This is because the msg[] member of struct efx_loopback_payload
is marked as 'const'.  Remove that.

Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

mm: make sendfile(2) killable

[ Upstream commit 296291cdd1629c308114504b850dc343eabc2782 ]

Currently a simple program below issues a sendfile(2) system call which
takes about 62 days to complete in my test KVM instance.

        int fd;
        off_t off = 0;

        fd = open("file", O_RDWR | O_TRUNC | O_SYNC | O_CREAT, 0644);
        ftruncate(fd, 2);
        lseek(fd, 0, SEEK_END);
        sendfile(fd, fd, &off, 0xfffffff);

Now you should not ask kernel to do a stupid stuff like copying 256MB in
2-byte chunks and call fsync(2) after each chunk but if you do, sysadmin
should have a way to stop you.

We actually do have a check for fatal_signal_pending() in
generic_perform_write() which triggers in this path however because we
always succeed in writing something before the check is done, we return
value > 0 from generic_perform_write() and thus the information about
signal gets lost.

Fix the problem by doing the signal check before writing anything.  That
way generic_perform_write() returns -EINTR, the error gets propagated up
and the sendfile loop terminates early.

Signed-off-by: Jan Kara <jack@suse.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

ASoC: wm8904: Correct number of EQ registers

[ Upstream commit 97aff2c03a1e4d343266adadb52313613efb027f ]

There are 24 EQ registers not 25, I suspect this bug came about because
the registers start at EQ1 not zero. The bug is relatively harmless as
the extra register written is an unused one.

Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

powerpc/rtas: Validate rtas.entry before calling enter_rtas()

[ Upstream commit 8832317f662c06f5c06e638f57bfe89a71c9b266 ]

Currently we do not validate rtas.entry before calling enter_rtas(). This
leads to a kernel oops when user space calls rtas system call on a powernv
platform (see below). This patch adds code to validate rtas.entry before
making enter_rtas() call.

  Oops: Exception in kernel mode, sig: 4 [#1]
  SMP NR_CPUS=1024 NUMA PowerNV
  task: c000000004294b80 ti: c0000007e1a78000 task.ti: c0000007e1a78000
  NIP: 0000000000000000 LR: 0000000000009c14 CTR: c000000000423140
  REGS: c0000007e1a7b920 TRAP: 0e40   Not tainted  (3.18.17-340.el7_1.pkvm3_1_0.2400.1.ppc64le)
  MSR: 1000000000081000 <HV,ME>  CR: 00000000  XER: 00000000
  CFAR: c000000000009c0c SOFTE: 0
  NIP [0000000000000000]           (null)
  LR [0000000000009c14] 0x9c14
  Call Trace:
  [c0000007e1a7bba0] [c00000000041a7f4] avc_has_perm_noaudit+0x54/0x110 (unreliable)
  [c0000007e1a7bd80] [c00000000002ddc0] ppc_rtas+0x150/0x2d0
  [c0000007e1a7be30] [c000000000009358] syscall_exit+0x0/0x98

Cc: stable@vger.kernel.org # v3.2+
Fixes: 55190f88789a ("powerpc: Add skeleton PowerNV platform")
Reported-by: NAGESWARA R. SASTRY <nasastry@in.ibm.com>
Signed-off-by: Vasant Hegde <hegdevasant@linux.vnet.ibm.com>
[mpe: Reword change log, trim oops, and add stable + fixes]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

iommu/amd: Don't clear DTE flags when modifying it

[ Upstream commit cbf3ccd09d683abf1cacd36e3640872ee912d99b ]

During device assignment/deassignment the flags in the DTE
get lost, which might cause spurious faults, for example
when the device tries to access the system management range.
Fix this by not clearing the flags with the rest of the DTE.

Reported-by: G. Richard Bellamy <rbellamy@pteradigm.com>
Tested-by: G. Richard Bellamy <rbellamy@pteradigm.com>
Cc: stable@vger.kernel.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

iwlwifi: pci: add a few more PCI subvendor IDs for the 7265 series

[ Upstream commit f08f625876476b6c4a87834dc86e3b927f4697d2 ]

Add 3 new subdevice IDs for the 0x095A device ID and 2 for the 0x095B
device ID.

Cc: <stable@vger.kernerl.org> [3.13+]
Reported-by: Jeremy <jeremy.bomkamp@gmail.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

iwlwifi: mvm: fix D3 firmware PN programming

[ Upstream commit 2cf5eb3ab7bb7f2e3a70edcef236cd62c87db030 ]

The code to send the RX PN data (for each TID) to the firmware
has a devastating bug: it overwrites the data for TID 0 with
all the TID data, leaving the remaining TIDs zeroed. This will
allow replays to actually be accepted by the firmware, which
could allow waking up the system.

Cc: <stable@vger.kernel.org> [3.1+]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

iwlwifi: pcie: support 7265-D devices

[ Upstream commit 3fd0d3c170ad6ba8b64e16938f699d0b43cc782e ]

Identify 7265-D devices using the hardware revision (they have the
same PCI IDs as 7265) and change the configuration for them taking
the differences (currently only the firmware image) into account.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

iwlwifi: fix firmware filename for 3160

[ Upstream commit b5a48134f8af08f5243328f8a0b05fc5ae7cf343 ]

The MODULE_FIRMWARE() for 3160 should be using the 7260 version as
it's done in the device configuration struct instead of referencing
IWL3160_UCODE_API_OK which doesn't even exist.

Cc: <stable@vger.kernel.org> [3.8+]
Reported-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

iwlwifi: dvm: fix D3 firmware PN programming

[ Upstream commit 5bd166872d8f99f156fac191299d24f828bb2348 ]

The code to send the RX PN data (for each TID) to the firmware
has a devastating bug: it overwrites the data for TID 0 with
all the TID data, leaving the remaining TIDs zeroed. This will
allow replays to actually be accepted by the firmware, which
could allow waking up the system.

Cc: <stable@vger.kernel.org> [3.1+]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

ath9k: declare required extra tx headroom

[ Upstream commit 029cd0370241641eb70235d205aa0b90c84dce44 ]

ath9k inserts padding between the 802.11 header and the data area (to
align it). Since it didn't declare this extra required headroom, this
led to some nasty issues like randomly dropped packets in some setups.

Cc: stable@vger.kernel.org
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

lib/radix-tree.c: change to simpler include

[ Upstream commit 886d3dfa85d5aa6f11813c319e50f5402c7cf4e4 ]

The comment helpfully explains why hardirq.h is included, but since
commit 2d4b84739f0a ("hardirq: Split preempt count mask definitions")
in_interrupt() has been provided by preempt_mask.h.  Use that instead,
saving around 40 lines in the generated dependency file.

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

rbd: fix double free on rbd_dev->header_name

[ Upstream commit 3ebe138ac642a195c7f2efdb918f464734421fd6 ]

If rbd_dev_image_probe() in rbd_dev_probe_parent() fails, header_name
is freed twice: once in rbd_dev_probe_parent() and then in its caller
rbd_dev_image_probe() (rbd_dev_image_probe() is called recursively to
handle parent images).

rbd_dev_probe_parent() is responsible for probing the parent, so it
shouldn't muck with clone's fields.

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

dm thin: fix missing pool reference count decrement in pool_ctr error path

[ Upstream commit ba30670f4d5292c4e7f7980bbd5071f7c4794cdd ]

Fixes: ac8c3f3df ("dm thin: generate event when metadata threshold passed")
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Cc: stable@vger.kernel.org # 3.10+
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

drm/radeon: add pm sysfs files late

[ Upstream commit 51a4726b04e880fdd9b4e0e58b13f70b0a68a7f5 ]

They were added relatively early in the driver init process
which meant that in some cases the driver was not finished
initializing before external tools tried to use them which
could result in a crash depending on the timing.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

drm/nouveau/fbcon: take runpm reference when userspace has an open fd

[ Upstream commit f231976c2e8964ceaa9250e57d27c35ff03825c2 ]

We need to do this in order to prevent accesses to the device while it's
powered down.  Userspace may have an mmap of the fb, and there's no good
way (that I know of) to prevent it from touching the device otherwise.

This fixes some nasty races between runpm and plymouth on some systems,
which result in the GPU getting very upset and hanging the boot.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

workqueue: make sure delayed work run in local cpu

[ Upstream commit 874bbfe600a660cba9c776b3957b1ce393151b76 ]

My system keeps crashing with below message. vmstat_update() schedules a delayed
work in current cpu and expects the work runs in the cpu.
schedule_delayed_work() is expected to make delayed work run in local cpu. The
problem is timer can be migrated with NO_HZ. __queue_work() queues work in
timer handler, which could run in a different cpu other than where the delayed
work is scheduled. The end result is the delayed work runs in different cpu.
The patch makes __queue_delayed_work records local cpu earlier. Where the timer
runs doesn't change where the work runs with the change.

[   28.010131] ------------[ cut here ]------------
[   28.010609] kernel BUG at ../mm/vmstat.c:1392!
[   28.011099] invalid opcode: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC KASAN
[   28.011860] Modules linked in:
[   28.012245] CPU: 0 PID: 289 Comm: kworker/0:3 Tainted: G        W4.3.0-rc3+ #634
[   28.013065] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.7.5-20140709_153802- 04/01/2014
[   28.014160] Workqueue: events vmstat_update
[   28.014571] task: ffff880117682580 ti: ffff8800ba428000 task.ti: ffff8800ba428000
[   28.015445] RIP: 0010:[<ffffffff8115f921>]  [<ffffffff8115f921>]vmstat_update+0x31/0x80
[   28.016282] RSP: 0018:ffff8800ba42fd80  EFLAGS: 00010297
[   28.016812] RAX: 0000000000000000 RBX: ffff88011a858dc0 RCX:0000000000000000
[   28.017585] RDX: ffff880117682580 RSI: ffffffff81f14d8c RDI:ffffffff81f4df8d
[   28.018366] RBP: ffff8800ba42fd90 R08: 0000000000000001 R09:0000000000000000
[   28.019169] R10: 0000000000000000 R11: 0000000000000121 R12:ffff8800baa9f640
[   28.019947] R13: ffff88011a81e340 R14: ffff88011a823700 R15:0000000000000000
[   28.020071] FS:  0000000000000000(0000) GS:ffff88011a800000(0000)knlGS:0000000000000000
[   28.020071] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[   28.020071] CR2: 00007ff6144b01d0 CR3: 00000000b8e93000 CR4:00000000000006f0
[   28.020071] Stack:
[   28.020071]  ffff88011a858dc0 ffff8800baa9f640 ffff8800ba42fe00ffffffff8106bd88
[   28.020071]  ffffffff8106bd0b 0000000000000096 0000000000000000ffffffff82f9b1e8
[   28.020071]  ffffffff829f0b10 0000000000000000 ffffffff81f18460ffff88011a81e340
[   28.020071] Call Trace:
[   28.020071]  [<ffffffff8106bd88>] process_one_work+0x1c8/0x540
[   28.020071]  [<ffffffff8106bd0b>] ? process_one_work+0x14b/0x540
[   28.020071]  [<ffffffff8106c214>] worker_thread+0x114/0x460
[   28.020071]  [<ffffffff8106c100>] ? process_one_work+0x540/0x540
[   28.020071]  [<ffffffff81071bf8>] kthread+0xf8/0x110
[   28.020071]  [<ffffffff81071b00>] ?kthread_create_on_node+0x200/0x200
[   28.020071]  [<ffffffff81a6522f>] ret_from_fork+0x3f/0x70
[   28.020071]  [<ffffffff81071b00>] ?kthread_create_on_node+0x200/0x200

Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: stable@vger.kernel.org # v2.6.31+
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

i2c: designware: Do not use parameters from ACPI on Dell Inspiron 7348

[ Upstream commit 56d4b8a24cef5d66f0d10ac778a520d3c2c68a48 ]

ACPI SSCN/FMCN methods were originally added because then the platform can
provide the most accurate HCNT/LCNT values to the driver. However, this
seems not to be true for Dell Inspiron 7348 where using these causes the
touchpad to fail in boot:

  i2c_hid i2c-DLL0675:00: failed to retrieve report from device.
  i2c_designware INT3433:00: i2c_dw_handle_tx_abort: lost arbitration
  i2c_hid i2c-DLL0675:00: failed to retrieve report from device.
  i2c_designware INT3433:00: controller timed out

The values received from ACPI are (in fast mode):

  HCNT: 72
  LCNT: 160

this translates to following timings (input clock is 100MHz on Broadwell):

  tHIGH: 720 ns (spec min 600 ns)
  tLOW: 1600 ns (spec min 1300 ns)
  Bus period: 2920 ns (assuming 300 ns tf and tr)
  Bus speed: 342.5 kHz

Both tHIGH and tLOW are within the I2C specification.

The calculated values when ACPI parameters are not used are (in fast mode):

  HCNT: 87
  LCNT: 159

which translates to:

  tHIGH: 870 ns (spec min 600 ns)
  tLOW: 1590 ns (spec min 1300 ns)
  Bus period 3060 ns (assuming 300 ns tf and tr)
  Bus speed 326.8 kHz

These values are also within the I2C specification.

Since both ACPI and calculated values meet the I2C specification timing
requirements it is hard to say why the touchpad does not function properly
with the ACPI values except that the bus speed is higher in this case (but
still well below the max 400kHz).

Solve this by adding DMI quirk to the driver that disables using ACPI
parameters on this particulare machine.

Reported-by: Pavel Roskin <plroskin@gmail.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Tested-by: Pavel Roskin <plroskin@gmail.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Cc: stable@kernel.org
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

i2c: s3c2410: enable RuntimePM before registering to the core

[ Upstream commit eadd709f5d2e8aebb1b7bf49460e97a68d81a9b0 ]

The core may register clients attached to this master which may use
funtionality from the master. So, RuntimePM must be enabled before, otherwise
this will fail. While here, move drvdata, too.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Acked-by: Kukjin Kim <kgene@kernel.org>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Cc: stable@kernel.org
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

i2c: rcar: enable RuntimePM before registering to the core

[ Upstream commit 4f7effddf4549d57114289f273710f077c4c330a ]

The core may register clients attached to this master which may use
funtionality from the master. So, RuntimePM must be enabled before, otherwise
this will fail. While here, move drvdata, too.

Reported-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Cc: stable@kernel.org
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

arm64: errata: use KBUILD_CFLAGS_MODULE for erratum #843419

[ Upstream commit b6dd8e0719c0d2d01429639a11b7bc2677de240c ]

Commit df057cc7b4fa ("arm64: errata: add module build workaround for
erratum #843419") sets CFLAGS_MODULE to ensure that the large memory
model is used by the compiler when building kernel modules.

However, CFLAGS_MODULE is an environment variable and intended to be
overridden on the command line, which appears to be the case with the
Ubuntu kernel packaging system, so use KBUILD_CFLAGS_MODULE instead.

Cc: <stable@vger.kernel.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Fixes: df057cc7b4fa ("arm64: errata: add module build workaround for erratum #843419")
Reported-by: Dann Frazier <dann.frazier@canonical.com>
Tested-by: Dann Frazier <dann.frazier@canonical.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

btrfs: fix use after free iterating extrefs

[ Upstream commit dc6c5fb3b514221f2e9d21ee626a9d95d3418dff ]

The code for btrfs inode-resolve has never worked properly for
files with enough hard links to trigger extrefs.  It was trying to
get the leaf out of a path after freeing the path:

btrfs_release_path(path);
leaf = path->nodes[0];
item_size = btrfs_item_size_nr(leaf, slot);

The fix here is to use the extent buffer we cloned just a little higher
up to avoid deadlocks caused by using the leaf in the path.

Signed-off-by: Chris Mason <clm@fb.com>
cc: stable@vger.kernel.org # v3.7+
cc: Mark Fasheh <mfasheh@suse.de>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Mark Fasheh <mfasheh@suse.de>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

crypto: ahash - ensure statesize is non-zero

[ Upstream commit 8996eafdcbad149ac0f772fb1649fbb75c482a6a ]

Unlike shash algorithms, ahash drivers must implement export
and import as their descriptors may contain hardware state and
cannot be exported as is.  Unfortunately some ahash drivers did
not provide them and end up causing crashes with algif_hash.

This patch adds a check to prevent these drivers from registering
ahash algorithms until they are fixed.

Cc: stable@vger.kernel.org
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

crypto: sparc - initialize blkcipher.ivsize

[ Upstream commit a66d7f724a96d6fd279bfbd2ee488def6b081bea ]

Some of the crypto algorithms write to the initialization vector,
but no space has been allocated for it. This clobbers adjacent memory.

Cc: stable@vger.kernel.org
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

ethtool: Use kcalloc instead of kmalloc for ethtool_get_strings

[ Upstream commit 077cb37fcf6f00a45f375161200b5ee0cd4e937b ]

It seems that kernel memory can leak into userspace by a
kmalloc, ethtool_get_strings, then copy_to_user sequence.

Avoid this by using kcalloc to zero fill the copied buffer.

Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

ppp: don't override sk->sk_state in pppoe_flush_dev()

[ Upstream commit e6740165b8f7f06d8caee0fceab3fb9d790a6fed ]

Since commit 2b018d57ff18 ("pppoe: drop PPPOX_ZOMBIEs in pppoe_release"),
pppoe_release() calls dev_put(po->pppoe_dev) if sk is in the
PPPOX_ZOMBIE state. But pppoe_flush_dev() can set sk->sk_state to
PPPOX_ZOMBIE _and_ reset po->pppoe_dev to NULL. This leads to the
following oops:

[  570.140800] BUG: unable to handle kernel NULL pointer dereference at 00000000000004e0
[  570.142931] IP: [<ffffffffa018c701>] pppoe_release+0x50/0x101 [pppoe]
[  570.144601] PGD 3d119067 PUD 3dbc1067 PMD 0
[  570.144601] Oops: 0000 [#1] SMP
[  570.144601] Modules linked in: l2tp_ppp l2tp_netlink l2tp_core ip6_udp_tunnel udp_tunnel pppoe pppox ppp_generic slhc loop crc32c_intel ghash_clmulni_intel jitterentropy_rng sha256_generic hmac drbg ansi_cprng aesni_intel aes_x86_64 ablk_helper cryptd lrw gf128mul glue_helper acpi_cpufreq evdev serio_raw processor button ext4 crc16 mbcache jbd2 virtio_net virtio_blk virtio_pci virtio_ring virtio
[  570.144601] CPU: 1 PID: 15738 Comm: ppp-apitest Not tainted 4.2.0 #1
[  570.144601] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Debian-1.8.2-1 04/01/2014
[  570.144601] task: ffff88003d30d600 ti: ffff880036b60000 task.ti: ffff880036b60000
[  570.144601] RIP: 0010:[<ffffffffa018c701>]  [<ffffffffa018c701>] pppoe_release+0x50/0x101 [pppoe]
[  570.144601] RSP: 0018:ffff880036b63e08  EFLAGS: 00010202
[  570.144601] RAX: 0000000000000000 RBX: ffff880034340000 RCX: 0000000000000206
[  570.144601] RDX: 0000000000000006 RSI: ffff88003d30dd20 RDI: ffff88003d30dd20
[  570.144601] RBP: ffff880036b63e28 R08: 0000000000000001 R09: 0000000000000000
[  570.144601] R10: 00007ffee9b50420 R11: ffff880034340078 R12: ffff8800387ec780
[  570.144601] R13: ffff8800387ec7b0 R14: ffff88003e222aa0 R15: ffff8800387ec7b0
[  570.144601] FS:  00007f5672f48700(0000) GS:ffff88003fc80000(0000) knlGS:0000000000000000
[  570.144601] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  570.144601] CR2: 00000000000004e0 CR3: 0000000037f7e000 CR4: 00000000000406a0
[  570.144601] Stack:
[  570.144601]  ffffffffa018f240 ffff8800387ec780 ffffffffa018f240 ffff8800387ec7b0
[  570.144601]  ffff880036b63e48 ffffffff812caabe ffff880039e4e000 0000000000000008
[  570.144601]  ffff880036b63e58 ffffffff812cabad ffff880036b63ea8 ffffffff811347f5
[  570.144601] Call Trace:
[  570.144601]  [<ffffffff812caabe>] sock_release+0x1a/0x75
[  570.144601]  [<ffffffff812cabad>] sock_close+0xd/0x11
[  570.144601]  [<ffffffff811347f5>] __fput+0xff/0x1a5
[  570.144601]  [<ffffffff811348cb>] ____fput+0x9/0xb
[  570.144601]  [<ffffffff81056682>] task_work_run+0x66/0x90
[  570.144601]  [<ffffffff8100189e>] prepare_exit_to_usermode+0x8c/0xa7
[  570.144601]  [<ffffffff81001a26>] syscall_return_slowpath+0x16d/0x19b
[  570.144601]  [<ffffffff813babb1>] int_ret_from_sys_call+0x25/0x9f
[  570.144601] Code: 48 8b 83 c8 01 00 00 a8 01 74 12 48 89 df e8 8b 27 14 e1 b8 f7 ff ff ff e9 b7 00 00 00 8a 43 12 a8 0b 74 1c 48 8b 83 a8 04 00 00 <48> 8b 80 e0 04 00 00 65 ff 08 48 c7 83 a8 04 00 00 00 00 00 00
[  570.144601] RIP  [<ffffffffa018c701>] pppoe_release+0x50/0x101 [pppoe]
[  570.144601]  RSP <ffff880036b63e08>
[  570.144601] CR2: 00000000000004e0
[  570.200518] ---[ end trace 46956baf17349563 ]---

pppoe_flush_dev() has no reason to override sk->sk_state with
PPPOX_ZOMBIE. pppox_unbind_sock() already sets sk->sk_state to
PPPOX_DEAD, which is the correct state given that sk is unbound and
po->pppoe_dev is NULL.

Fixes: 2b018d57ff18 ("pppoe: drop PPPOX_ZOMBIEs in pppoe_release")
Tested-by: Oleksii Berezhniak <core@irc.lg.ua>
Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

net: add pfmemalloc check in sk_add_backlog()

[ Upstream commit c7c49b8fde26b74277188bdc6c9dca38db6fa35b ]

Greg reported crashes hitting the following check in __sk_backlog_rcv()

BUG_ON(!sock_flag(sk, SOCK_MEMALLOC));

The pfmemalloc bit is currently checked in sk_filter().

This works correctly for TCP, because sk_filter() is ran in
tcp_v[46]_rcv() before hitting the prequeue or backlog checks.

For UDP or other protocols, this does not work, because the sk_filter()
is ran from sock_queue_rcv_skb(), which might be called _after_ backlog
queuing if socket is owned by user by the time packet is processed by
softirq handler.

Fixes: b4b9e35585089 ("netvm: set PF_MEMALLOC as appropriate during SKB processing")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Greg Thelen <gthelen@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

skbuff: Fix skb checksum partial check.

[ Upstream commit 31b33dfb0a144469dd805514c9e63f4993729a48 ]

Earlier patch 6ae459bda tried to detect void ckecksum partial
skb by comparing pull length to checksum offset. But it does
not work for all cases since checksum-offset depends on
updates to skb->data.

Following patch fixes it by validating checksum start offset
after skb-data pointer is updated. Negative value of checksum
offset start means there is no need to checksum.

Fixes: 6ae459bda ("skbuff: Fix skb checksum flag on skb pull")
Reported-by: Andrew Vagin <avagin@odin.com>
Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

skbuff: Fix skb checksum flag on skb pull

[ Upstream commit 6ae459bdaaeebc632b16e54dcbabb490c6931d61 ]

VXLAN device can receive skb with checksum partial. But the checksum
offset could be in outer header which is pulled on receive. This results
in negative checksum offset for the skb. Such skb can cause the assert
failure in skb_checksum_help(). Following patch fixes the bug by setting
checksum-none while pulling outer header.

Following is the kernel panic msg from old kernel hitting the bug.

------------[ cut here ]------------
kernel BUG at net/core/dev.c:1906!
RIP: 0010:[<ffffffff81518034>] skb_checksum_help+0x144/0x150
Call Trace:
<IRQ>
[<ffffffffa0164c28>] queue_userspace_packet+0x408/0x470 [openvswitch]
[<ffffffffa016614d>] ovs_dp_upcall+0x5d/0x60 [openvswitch]
[<ffffffffa0166236>] ovs_dp_process_packet_with_key+0xe6/0x100 [openvswitch]
[<ffffffffa016629b>] ovs_dp_process_received_packet+0x4b/0x80 [openvswitch]
[<ffffffffa016c51a>] ovs_vport_receive+0x2a/0x30 [openvswitch]
[<ffffffffa0171383>] vxlan_rcv+0x53/0x60 [openvswitch]
[<ffffffffa01734cb>] vxlan_udp_encap_recv+0x8b/0xf0 [openvswitch]
[<ffffffff8157addc>] udp_queue_rcv_skb+0x2dc/0x3b0
[<ffffffff8157b56f>] __udp4_lib_rcv+0x1cf/0x6c0
[<ffffffff8157ba7a>] udp_rcv+0x1a/0x20
[<ffffffff8154fdbd>] ip_local_deliver_finish+0xdd/0x280
[<ffffffff81550128>] ip_local_deliver+0x88/0x90
[<ffffffff8154fa7d>] ip_rcv_finish+0x10d/0x370
[<ffffffff81550365>] ip_rcv+0x235/0x300
[<ffffffff8151ba1d>] __netif_receive_skb+0x55d/0x620
[<ffffffff8151c360>] netif_receive_skb+0x80/0x90
[<ffffffff81459935>] virtnet_poll+0x555/0x6f0
[<ffffffff8151cd04>] net_rx_action+0x134/0x290
[<ffffffff810683d8>] __do_softirq+0xa8/0x210
[<ffffffff8162fe6c>] call_softirq+0x1c/0x30
[<ffffffff810161a5>] do_softirq+0x65/0xa0
[<ffffffff810687be>] irq_exit+0x8e/0xb0
[<ffffffff81630733>] do_IRQ+0x63/0xe0
[<ffffffff81625f2e>] common_interrupt+0x6e/0x6e

Reported-by: Anupam Chanda <achanda@vmware.com>
Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
Acked-by: Tom Herbert <tom@herbertland.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

net/unix: fix logic about sk_peek_offset

[ Upstream commit e9193d60d363e4dff75ff6d43a48f22be26d59c7 ]

Now send with MSG_PEEK can return data from multiple SKBs.

Unfortunately we take into account the peek offset for each skb,
that is wrong. We need to apply the peek offset only once.

In addition, the peek offset should be used only if MSG_PEEK is set.

Cc: "David S. Miller" <davem@davemloft.net> (maintainer:NETWORKING
Cc: Eric Dumazet <edumazet@google.com> (commit_signer:1/14=7%)
Cc: Aaron Conole <aconole@bytheb.org>
Fixes: 9f389e35674f ("af_unix: return data from multiple SKBs on recv() with MSG_PEEK flag")
Signed-off-by: Andrey Vagin <avagin@openvz.org>
Tested-by: Aaron Conole <aconole@bytheb.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

af_unix: return data from multiple SKBs on recv() with MSG_PEEK flag

[ Upstream commit 9f389e35674f5b086edd70ed524ca0f287259725 ]

AF_UNIX sockets now return multiple skbs from recv() when MSG_PEEK flag
is set.

This is referenced in kernel bugzilla #12323 @
https://bugzilla.kernel.org/show_bug.cgi?id=12323

As described both in the BZ and lkml thread @
http://lkml.org/lkml/2008/1/8/444 calling recv() with MSG_PEEK on an
AF_UNIX socket only reads a single skb, where the desired effect is
to return as much skb data has been queued, until hitting the recv
buffer size (whichever comes first).

The modified MSG_PEEK path will now move to the next skb in the tree
and jump to the again: label, rather than following the natural loop
structure. This requires duplicating some of the loop head actions.

This was tested using the python socketpair python code attached to
the bugzilla issue.

Signed-off-by: Aaron Conole <aconole@bytheb.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

af_unix: Convert the unix_sk macro to an inline function for type safety

[ Upstream commit 4613012db1d911f80897f9446a49de817b2c4c47 ]

As suggested by Eric Dumazet this change replaces the
#define with a static inline function to enjoy
complaints by the compiler when misusing the API.

Signed-off-by: Aaron Conole <aconole@bytheb.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

l2tp: protect tunnel->del_work by ref_count

[ Upstream commit 06a15f51cf3618e32a73871ee6a547ef7fd902b5 ]

There is a small chance that tunnel_free() is called before tunnel->del_work scheduled
resulting in a zero pointer dereference.

Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
Acked-by: James Chapman <jchapman@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

jbd2: avoid infinite loop when destroying aborted journal

[ Upstream commit 841df7df196237ea63233f0f9eaa41db53afd70f ]

Commit 6f6a6fda2945 "jbd2: fix ocfs2 corrupt when updating journal
superblock fails" changed jbd2_cleanup_journal_tail() to return EIO
when the journal is aborted. That makes logic in
jbd2_log_do_checkpoint() bail out which is fine, except that
jbd2_journal_destroy() expects jbd2_log_do_checkpoint() to always make
a progress in cleaning the journal. Without it jbd2_journal_destroy()
just loops in an infinite loop.

Fix jbd2_journal_destroy() to cleanup journal checkpoint lists of
jbd2_log_do_checkpoint() fails with error.

Reported-by: Eryu Guan <guaneryu@gmail.com>
Tested-by: Eryu Guan <guaneryu@gmail.com>
Fixes: 6f6a6fda294506dfe0e3e0a253bb2d2923f28f0a
Signed-off-by: Jan Kara <jack@suse.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

Linux 3.18.24

Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

tty: fix stall caused by missing memory barrier in drivers/tty/n_tty.c

[ Upstream commit e81107d4c6bd098878af9796b24edc8d4a9524fd ]

My colleague ran into a program stall on a x86_64 server, where
n_tty_read() was waiting for data even if there was data in the buffer
in the pty.  kernel stack for the stuck process looks like below.
 #0 [ffff88303d107b58] __schedule at ffffffff815c4b20
 #1 [ffff88303d107bd0] schedule at ffffffff815c513e
 #2 [ffff88303d107bf0] schedule_timeout at ffffffff815c7818
 #3 [ffff88303d107ca0] wait_woken at ffffffff81096bd2
 #4 [ffff88303d107ce0] n_tty_read at ffffffff8136fa23
 #5 [ffff88303d107dd0] tty_read at ffffffff81368013
 #6 [ffff88303d107e20] __vfs_read at ffffffff811a3704
 #7 [ffff88303d107ec0] vfs_read at ffffffff811a3a57
 #8 [ffff88303d107f00] sys_read at ffffffff811a4306
 #9 [ffff88303d107f50] entry_SYSCALL_64_fastpath at ffffffff815c86d7

There seems to be two problems causing this issue.

First, in drivers/tty/n_tty.c, __receive_buf() stores the data and
updates ldata->commit_head using smp_store_release() and then checks
the wait queue using waitqueue_active().  However, since there is no
memory barrier, __receive_buf() could return without calling
wake_up_interactive_poll(), and at the same time, n_tty_read() could
start to wait in wait_woken() as in the following chart.

        __receive_buf()                         n_tty_read()
------------------------------------------------------------------------
if (waitqueue_active(&tty->read_wait))
/* Memory operations issued after the
   RELEASE may be completed before the
   RELEASE operation has completed */
                                        add_wait_queue(&tty->read_wait, &wait);
                                        ...
                                        if (!input_available_p(tty, 0)) {
smp_store_release(&ldata->commit_head,
                  ldata->read_head);
                                        ...
                                        timeout = wait_woken(&wait,
                                          TASK_INTERRUPTIBLE, timeout);
------------------------------------------------------------------------

The second problem is that n_tty_read() also lacks a memory barrier
call and could also cause __receive_buf() to return without calling
wake_up_interactive_poll(), and n_tty_read() to wait in wait_woken()
as in the chart below.

        __receive_buf()                         n_tty_read()
------------------------------------------------------------------------
                                        spin_lock_irqsave(&q->lock, flags);
                                        /* from add_wait_queue() */
                                        ...
                                        if (!input_available_p(tty, 0)) {
                                        /* Memory operations issued after the
                                           RELEASE may be completed before the
                                           RELEASE operation has completed */
smp_store_release(&ldata->commit_head,
                  ldata->read_head);
if (waitqueue_active(&tty->read_wait))
                                        __add_wait_queue(q, wait);
                                        spin_unlock_irqrestore(&q->lock,flags);
                                        /* from add_wait_queue() */
                                        ...
                                        timeout = wait_woken(&wait,
                                          TASK_INTERRUPTIBLE, timeout);
------------------------------------------------------------------------

There are also other places in drivers/tty/n_tty.c which have similar
calls to waitqueue_active(), so instead of adding many memory barrier
calls, this patch simply removes the call to waitqueue_active(),
leaving just wake_up*() behind.

This fixes both problems because, even though the memory access before
or after the spinlocks in both wake_up*() and add_wait_queue() can
sneak into the critical section, it cannot go past it and the critical
section assures that they will be serialized (please see "INTER-CPU
ACQUIRING BARRIER EFFECTS" in Documentation/memory-barriers.txt for a
better explanation).  Moreover, the resulting code is much simpler.

Latency measurement using a ping-pong test over a pty doesn't show any
visible performance drop.

Signed-off-by: Kosuke Tatsukawa <tatsu@ab.jp.nec.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

Revert "tty: fix stall caused by missing memory barrier in drivers/tty/n_tty.c"

This reverts commit af32cc7bde6304dac92e6a74fe4b2cc8120cb29a.

The commit was incorrectly backported and was causing hangs.

Reported-by: Corey Wright <undefined@pobox.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

Linux 3.18.23

Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

x86: Init per-cpu shadow copy of CR4 on 32-bit CPUs too

[ Upstream commit 5b2bdbc84556774afbe11bcfd24c2f6411cfa92b ]

Commit:

   1e02ce4cccdc ("x86: Store a per-cpu shadow copy of CR4")

added a shadow CR4 such that reads and writes that do not
modify the CR4 execute much faster than always reading the
register itself.

The change modified cpu_init() in common.c, so that the
shadow CR4 gets initialized before anything uses it.

Unfortunately, there's two cpu_init()s in common.c. There's
one for 64-bit and one for 32-bit. The commit only added
the shadow init to the 64-bit path, but the 32-bit path
needs the init too.

Link: http://lkml.kernel.org/r/20150227125208.71c36402@gandalf.local.home
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Acked-by: Andy Lutomirski <luto@amacapital.net>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/20150227145019.2bdd4354@gandalf.local.home
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

3w-9xxx: don't unmap bounce buffered commands

[ Upstream commit 15e3d5a285ab9283136dba34bbf72886d9146706 ]

3w controller don't dma map small single SGL entry commands but instead
bounce buffer them.  Add a helper to identify these commands and don't
call scsi_dma_unmap for them.

Based on an earlier patch from James Bottomley.

Fixes: 118c85 ("3w-9xxx: fix command completion race")
Reported-by: Tóth Attila <atoth@atoth.sote.hu>
Tested-by: Tóth Attila <atoth@atoth.sote.hu>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Adam Radford <aradford@gmail.com>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

fib_rules: Fix dump_rules() not to exit early

[ Upstream commit 8ea4b34355189e1f1eacaf2d825f2dce776b3b9c ]

Backports of 41fc014332d9 ("fib_rules: fix fib rule dumps across
multiple skbs") introduced a regression in "ip rule show" - it ends up
dumping the first rule over and over and never exiting, because 3.19
and earlier are missing commit 053c095a82cf ("netlink: make
nlmsg_end() and genlmsg_end() void"), so fib_nl_fill_rule() ends up
returning skb->len (i.e. > 0) in the success case.

Fix this by checking the return code for < 0 instead of != 0.

Signed-off-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

vfs: Test for and handle paths that are unreachable from their mnt_root

[ Upstream commit 397d425dc26da728396e66d392d5dcb8dac30c37 ]

In rare cases a directory can be renamed out from under a bind mount.
In those cases without special handling it becomes possible to walk up
the directory tree to the root dentry of the filesystem and down
from the root dentry to every other file or directory on the filesystem.

Like division by zero .. from an unconnected path can not be given
a useful semantic as there is no predicting at which path component
the code will realize it is unconnected.  We certainly can not match
the current behavior as the current behavior is a security hole.

Therefore when encounting .. when following an unconnected path
return -ENOENT.

- Add a function path_connected to verify path->dentry is reachable
  from path->mnt.mnt_root.  AKA to validate that rename did not do
  something nasty to the bind mount.

  To avoid races path_connected must be called after following a path
  component to it's next path component.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

md: flush ->event_work before stopping array.

[ Upstream commit ee5d004fd0591536a061451eba2b187092e9127c ]

The 'event_work' worker used by dm-raid may still be running
when the array is stopped.  This can result in an oops.

So flush the workqueue on which it is run after detaching
and before destroying the device.

Reported-by: Heinz Mauelshagen <heinzm@redhat.com>
Signed-off-by: NeilBrown <neilb@suse.com>
Cc: stable@vger.kernel.org (2.6.38+ please delay 2 weeks after -final release)
Fixes: 9d09e663d550 ("dm: raid456 basic support")
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

x86/nmi/64: Fix a paravirt stack-clobbering bug in the NMI code

[ Upstream commit 83c133cf11fb0e68a51681447e372489f052d40e ]

The NMI entry code that switches to the normal kernel stack needs to
be very careful not to clobber any extra stack slots on the NMI
stack.  The code is fine under the assumption that SWAPGS is just a
normal instruction, but that assumption isn't really true.  Use
SWAPGS_UNSAFE_STACK instead.

This is part of a fix for some random crashes that Sasha saw.

Fixes: 9b6e6a8334d5 ("x86/nmi/64: Switch stacks on userspace NMI entry")
Reported-and-tested-by: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/974bc40edffdb5c2950a5c4977f821a446b76178.1442791737.git.luto@kernel.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

Revert "iio: bmg160: IIO_BUFFER and IIO_TRIGGERED_BUFFER are required"

[ Upstream commit HEAD ]

This reverts commit 279c039ca63acbd69e69d6d7ddfed50346fb2185 which was
commit 06d2f6ca5a38abe92f1f3a132b331eee773868c3 upstream as it should
not have been applied.

Reported-by: Luis Henriques <luis.henriques@canonical.com>
Cc: Markus Pargmann <mpa@pengutronix.de>
Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
(cherry picked from commit 934d9b907aeec5f344ca801ed7361551199dfc69)
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

net: Fix skb_set_peeked use-after-free bug

[ Upstream commit a0a2a6602496a45ae838a96db8b8173794b5d398 ]

The commit 738ac1ebb96d02e0d23bc320302a6ea94c612dec ("net: Clone
skb before setting peeked flag") introduced a use-after-free bug
in skb_recv_datagram.  This is because skb_set_peeked may create
a new skb and free the existing one.  As it stands the caller will
continue to use the old freed skb.

This patch fixes it by making skb_set_peeked return the new skb
(or the old one if unchanged).

Fixes: 738ac1ebb96d ("net: Clone skb before setting peeked flag")
Reported-by: Brenden Blanco <bblanco@plumgrid.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Tested-by: Brenden Blanco <bblanco@plumgrid.com>
Reviewed-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

mm: check if section present during memory block registering

[ Upstream commit 04697858d89e4bf2650364f8d6956e2554e8ef88 ]

Tony Luck found on his setup, if memory block size 512M will cause crash
during booting.

  BUG: unable to handle kernel paging request at ffffea0074000020
  IP: get_nid_for_pfn+0x17/0x40
  PGD 128ffcb067 PUD 128ffc9067 PMD 0
  Oops: 0000 [#1] SMP
  Modules linked in:
  CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.2.0-rc8 #1
  ...
  Call Trace:
     ? register_mem_sect_under_node+0x66/0xe0
     register_one_node+0x17b/0x240
     ? pci_iommu_alloc+0x6e/0x6e
     topology_init+0x3c/0x95
     do_one_initcall+0xcd/0x1f0

The system has non continuous RAM address:
 BIOS-e820: [mem 0x0000001300000000-0x0000001cffffffff] usable
 BIOS-e820: [mem 0x0000001d70000000-0x0000001ec7ffefff] usable
 BIOS-e820: [mem 0x0000001f00000000-0x0000002bffffffff] usable
 BIOS-e820: [mem 0x0000002c18000000-0x0000002d6fffefff] usable
 BIOS-e820: [mem 0x0000002e00000000-0x00000039ffffffff] usable

So there are start sections in memory block not present.  For example:

    memory block : [0x2c18000000, 0x2c20000000) 512M

first three sections are not present.

The current register_mem_sect_under_node() assume first section is
present, but memory block section number range [start_section_nr,
end_section_nr] would include not present section.

For arch that support vmemmap, we don't setup memmap for struct page
area within not present sections area.

So skip the pfn range that belong to absent section.

[akpm@linux-foundation.org: simplification]
[rientjes@google.com: more simplification]
Fixes: bdee237c0343 ("x86: mm: Use 2GB memory block size on large memory x86-64 systems")
Fixes: 982792c782ef ("x86, mm: probe memory block size for generic x86 64bit")
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: David Rientjes <rientjes@google.com>
Reported-by: Tony Luck <tony.luck@intel.com>
Tested-by: Tony Luck <tony.luck@intel.com>
Cc: Greg KH <greg@kroah.com>
Cc: Ingo Molnar <mingo@elte.hu>
Tested-by: David Rientjes <rientjes@google.com>
Cc: <stable@vger.kernel.org> [3.15+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

hpfs: update ctime and mtime on directory modification

[ Upstream commit f49a26e7718dd30b49e3541e3e25aecf5e7294e2 ]

Update ctime and mtime when a directory is modified. (though OS/2 doesn't
update them anyway)

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@kernel.org # v3.3+
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

drivercore: Fix unregistration path of platform devices

[ Upstream commit 7f5dcaf1fdf289767a126a0a5cc3ef39b5254b06 ]

The unregister path of platform_device is broken. On registration, it
will register all resources with either a parent already set, or
type==IORESOURCE_{IO,MEM}. However, on unregister it will release
everything with type==IORESOURCE_{IO,MEM}, but ignore the others. There
are also cases where resources don't get registered in the first place,
like with devices created by of_platform_populate()*.

Fix the unregister path to be symmetrical with the register path by
checking the parent pointer instead of the type field to decide which
resources to unregister. This is safe because the upshot of the
registration path algorithm is that registered resources have a parent
pointer, and non-registered resources do not.

* It can be argued that of_platform_populate() should be registering
  it's resources, and they argument has some merit. However, there are
  quite a few platforms that end up broken if we try to do that due to
  overlapping resources in the device tree. Until that is fixed, we need
  to solve the immediate problem.

Cc: Pantelis Antoniou <pantelis.antoniou@konsulko.com>
Cc: Wolfram Sang <wsa@the-dreams.de>
Cc: Rob Herring <robh@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: Grant Likely <grant.likely@linaro.org>
Tested-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Cc: stable@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

ARM: OMAP2+: DRA7: clockdomain: change l4per2_7xx_clkdm to SW_WKUP

[ Upstream commit b9e23f321940d2db2c9def8ff723b8464fb86343 ]

Legacy IPs like PWMSS, present under l4per2_7xx_clkdm, cannot support
smart-idle when its clock domain is in HW_AUTO on DRA7 SoCs. Hence,
program clock domain to SW_WKUP.

Signed-off-by: Vignesh R <vigneshr@ti.com>
Acked-by: Tero Kristo <t-kristo@ti.com>
Reviewed-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

of/address: Don't loop forever in of_find_matching_node_by_address().

[ Upstream commit 3a496b00b6f90c41bd21a410871dfc97d4f3c7ab ]

If the internal call to of_address_to_resource() fails, we end up
looping forever in of_find_matching_node_by_address().  This can be
caused by a defective device tree, or calling with an incorrect
matches argument.

Fix by calling of_find_matching_node() unconditionally at the end of
the loop.

Signed-off-by: David Daney <david.daney@cavium.com>
Cc: stable@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

auxdisplay: ks0108: fix refcount

[ Upstream commit bab383de3b84e584b0f09227151020b2a43dc34c ]

parport_find_base() will implicitly do parport_get_port() which
increases the refcount. Then parport_register_device() will again
increment the refcount. But while unloading the module we are only
doing parport_unregister_device() decrementing the refcount only once.
We add an parport_put_port() to neutralize the effect of
parport_get_port().

Cc: <stable@vger.kernel.org> # 2.6.32+
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

Doc: ABI: testing: configfs-usb-gadget-sourcesink

[ Upstream commit 4bc58eb16bb2352854b9c664cc36c1c68d2bfbb7 ]

Fix the name of attribute

Cc: <stable@vger.kernel.org>
Signed-off-by: Peter Chen <peter.chen@freescale.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

Doc: ABI: testing: configfs-usb-gadget-loopback

[ Upstream commit 8cd50626823c00ca7472b2f61cb8c0eb9798ddc0 ]

Fix the name of attribute

Cc: <stable@vger.kernel.org>
Signed-off-by: Peter Chen <peter.chen@freescale.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

devres: fix devres_get()

[ Upstream commit 64526370d11ce8868ca495723d595b61e8697fbf ]

Currently, devres_get() passes devres_free() the pointer to devres,
but devres_free() should be given with the pointer to resource data.

Fixes: 9ac7849e35f7 ("devres: device resource management")
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: stable <stable@vger.kernel.org> # 2.6.21+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

xtensa: fix kernel register spilling

[ Upstream commit 77d6273e79e3a86552fcf10cdd31a69b46ed2ce6 ]

call12 can't be safely used as the first call in the inline function,
because the compiler does not extend the stack frame of the bounding
function accordingly, which may result in corruption of local variables.

If a call needs to be done, do call8 first followed by call12.

For pure assembly code in _switch_to increase stack frame size of the
bounding function.

Cc: stable@vger.kernel.org
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

xtensa: fix threadptr reload on return to userspace

[ Upstream commit 4229fb12a03e5da5882b420b0aa4a02e77447b86 ]

Userspace return code may skip restoring THREADPTR register if there are
no registers that need to be zeroed. This leads to spurious failures in
libc NPTL tests.

Always restore THREADPTR on return to userspace.

Cc: stable@vger.kernel.org
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>