arm64: dts: imx8mn-ddr4-evk: Describe the 32.768 kHz PMIC clock

[ Upstream commit 0310b5aa0656a94102344f1e9ae2892e342a665d ]

The ROHM BD71847 PMIC has a 32.768 kHz clock.

Describe the PMIC clock to fix the following boot errors:

bd718xx-clk bd71847-clk.1.auto: No parent clk found
bd718xx-clk: probe of bd71847-clk.1.auto failed with error -22

Based on the same fix done for imx8mm-evk as per commit
a6a355ede574 ("arm64: dts: imx8mm-evk: Add 32.768 kHz clock to PMIC")

Fixes: 3e44dd09736d ("arm64: dts: imx8mn-ddr4-evk: Add rohm,bd71847 PMIC support")
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: imx6ull-colibri: fix vqmmc regulator

[ Upstream commit 45974e4276a8d6653394f66666fc57d8ffa6de9a ]

The correct spelling for the property is gpios. Otherwise, the regulator
will neither reserve nor control any GPIOs. Thus, any SD/MMC card which
can use UHS-I modes will fail.

Fixes: c2e4987e0e02 ("ARM: dts: imx6ull: add Toradex Colibri iMX6ULL support")
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Signed-off-by: Denys Drozdov <denys.drozdov@toradex.com>
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

sctp: check asoc strreset_chunk in sctp_generate_reconf_event

[ Upstream commit 165e3e17fe8fe6a8aab319bc6e631a2e23b9a857 ]

A null pointer reference issue can be triggered when the response of a
stream reconf request arrives after the timer is triggered, such as:

  send Incoming SSN Reset Request --->
  CPU0:
   reconf timer is triggered,
   go to the handler code before hold sk lock
                            <--- reply with Outgoing SSN Reset Request
  CPU1:
   process Outgoing SSN Reset Request,
   and set asoc->strreset_chunk to NULL
  CPU0:
   continue the handler code, hold sk lock,
   and try to hold asoc->strreset_chunk, crash!

In Ying Xu's testing, the call trace is:

  [ ] BUG: kernel NULL pointer dereference, address: 0000000000000010
  [ ] RIP: 0010:sctp_chunk_hold+0xe/0x40 [sctp]
  [ ] Call Trace:
  [ ]  <IRQ>
  [ ]  sctp_sf_send_reconf+0x2c/0x100 [sctp]
  [ ]  sctp_do_sm+0xa4/0x220 [sctp]
  [ ]  sctp_generate_reconf_event+0xbd/0xe0 [sctp]
  [ ]  call_timer_fn+0x26/0x130

This patch is to fix it by returning from the timer handler if asoc
strreset_chunk is already set to NULL.

Fixes: 7b9438de0cd4 ("sctp: add stream reconf timer")
Reported-by: Ying Xu <yinxu@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tcp: ensure to use the most recently sent skb when filling the rate sample

[ Upstream commit b253a0680ceadc5d7b4acca7aa2d870326cad8ad ]

If an ACK (s)acks multiple skbs, we favor the information
from the most recently sent skb by choosing the skb with
the highest prior_delivered count. But in the interval
between receiving ACKs, we send multiple skbs with the same
prior_delivered, because the tp->delivered only changes
when we receive an ACK.

We used RACK's solution, copying tcp_rack_sent_after() as
tcp_skb_sent_after() helper to determine "which packet was
sent last?". Later, we will use tcp_skb_sent_after() instead
in RACK.

Fixes: b9f64820fb22 ("tcp: track data delivery rate for a TCP connection")
Signed-off-by: Pengcheng Yang <yangpc@wangsu.com>
Cc: Paolo Abeni <pabeni@redhat.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Tested-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/1650422081-22153-1-git-send-email-yangpc@wangsu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tcp: md5: incorrect tcp_header_len for incoming connections

[ Upstream commit 5b0b9e4c2c895227c8852488b3f09839233bba54 ]

In tcp_create_openreq_child we adjust tcp_header_len for md5 using the
remote address in newsk. But that address is still 0 in newsk at this
point, and it is only set later by the callers (tcp_v[46]_syn_recv_sock).
Use the address from the request socket instead.

Fixes: cfb6eeb4c860 ("[TCP]: MD5 Signature Option (RFC2385) support.")
Signed-off-by: Francesco Ruggeri <fruggeri@arista.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20220421005026.686A45EC01F2@us226.sjc.aristanetworks.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf, lwt: Fix crash when using bpf_skb_set_tunnel_key() from bpf_xmit lwt hook

[ Upstream commit b02d196c44ead1a5949729be9ff08fe781c3e48a ]

xmit_check_hhlen() observes the dst for getting the device hard header
length to make sure a modified packet can fit. When a helper which changes
the dst - such as bpf_skb_set_tunnel_key() - is called as part of the
xmit program the accessed dst is no longer valid.

This leads to the following splat:

 BUG: kernel NULL pointer dereference, address: 00000000000000de
 #PF: supervisor read access in kernel mode
 #PF: error_code(0x0000) - not-present page
 PGD 0 P4D 0
 Oops: 0000 [#1] PREEMPT SMP PTI
 CPU: 0 PID: 798 Comm: ping Not tainted 5.18.0-rc2+ #103
 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014
 RIP: 0010:bpf_xmit+0xfb/0x17f
 Code: c6 c0 4d cd 8e 48 c7 c7 7d 33 f0 8e e8 42 09 fb ff 48 8b 45 58 48 8b 95 c8 00 00 00 48 2b 95 c0 00 00 00 48 83 e0 fe 48 8b 00 <0f> b7 80 de 00 00 00 39 c2 73 22 29 d0 b9 20 0a 00 00 31 d2 48 89
 RSP: 0018:ffffb148c0bc7b98 EFLAGS: 00010282
 RAX: 0000000000000000 RBX: 0000000000240008 RCX: 0000000000000000
 RDX: 0000000000000010 RSI: 00000000ffffffea RDI: 00000000ffffffff
 RBP: ffff922a828a4e00 R08: ffffffff8f1350e8 R09: 00000000ffffdfff
 R10: ffffffff8f055100 R11: ffffffff8f105100 R12: 0000000000000000
 R13: ffff922a828a4e00 R14: 0000000000000040 R15: 0000000000000000
 FS:  00007f414e8f0080(0000) GS:ffff922afdc00000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 00000000000000de CR3: 0000000002d80006 CR4: 0000000000370ef0
 Call Trace:
  <TASK>
  lwtunnel_xmit.cold+0x71/0xc8
  ip_finish_output2+0x279/0x520
  ? __ip_finish_output.part.0+0x21/0x130

Fix by fetching the device hard header length before running the BPF code.

Fixes: 3a0af8fd61f9 ("bpf: BPF for lightweight tunnel infrastructure")
Signed-off-by: Eyal Birger <eyal.birger@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220420165219.1755407-1-eyal.birger@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

mtd: rawnand: Fix return value check of wait_for_completion_timeout

[ Upstream commit 084c16ab423a8890121b902b405823bfec5b4365 ]

wait_for_completion_timeout() returns unsigned long not int.
It returns 0 if timed out, and positive if completed.
The check for <= 0 is ambiguous and should be == 0 here
indicating timeout which is the only error case.

Fixes: 83738d87e3a0 ("mtd: sh_flctl: Add DMA capabilty")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20220412083435.29254-1-linmq006@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

ipvs: correctly print the memory size of ip_vs_conn_tab

[ Upstream commit eba1a872cb73314280d5448d934935b23e30b7ca ]

The memory size of ip_vs_conn_tab changed after we use hlist
instead of list.

Fixes: 731109e78415 ("ipvs: use hlist instead of list")
Signed-off-by: Pengcheng Yang <yangpc@wangsu.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
Acked-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: logicpd-som-lv: Fix wrong pinmuxing on OMAP35

[ Upstream commit 46ff3df87215ff42c0cd2c4bdb7d74540384a69c ]

The pinout of the OMAP35 and DM37 variants of the SOM-LV are the
same, but the macros which define the pinmuxing are different
between OMAP3530 and DM3730.  The pinmuxing was correct for
for the DM3730, but wrong for the OMAP3530.  Since the boot loader
was correctly pin-muxing the pins, this was not obvious. As the
bootloader not guaranteed to pinmux all the pins any more, this
causes an issue, so the pinmux needs to be moved from a common
file to their respective board files.

Fixes: f8a2e3ff7103 ("ARM: dts: Add minimal support for LogicPD OMAP35xx SOM-LV devkit")
Signed-off-by: Adam Ford <aford173@gmail.com>
Message-Id: <20220303171818.11060-1-aford173@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: am3517-evm: Fix misc pinmuxing

[ Upstream commit 942da3af32b2288e674736eb159d1fc676261691 ]

The bootloader for the AM3517 has previously done much of the pin
muxing, but as the bootloader is moving more and more to a model
based on the device tree, it may no longer automatically mux the
pins, so it is necessary to add the pinmuxing to the Linux device
trees so the respective peripherals can remain functional.

Fixes: 6ed1d7997561 ("ARM: dts: am3517-evm: Add support for UI board and Audio")
Signed-off-by: Adam Ford <aford173@gmail.com>
Message-Id: <20220226214820.747847-1-aford173@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: Fix mmc order for omap3-gta04

[ Upstream commit 09269dd050094593fc747f2a5853d189fefcb6b5 ]

Commit a1ebdb374199 ("ARM: dts: Fix swapped mmc order for omap3")
introduces general mmc aliases. Let's tailor them to the need
of the GTA04 board which does not make use of mmc2 and mmc3 interfaces.

Fixes: a1ebdb374199 ("ARM: dts: Fix swapped mmc order for omap3")
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Message-Id: <dc9173ee3d391d9e92b7ab8ed4f84b29f0a21c83.1646744420.git.hns@goldelico.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

phy: ti: Add missing pm_runtime_disable() in serdes_am654_probe

[ Upstream commit ce88613e5bd579478653a028291098143f2a5bdf ]

The pm_runtime_enable() will increase power disable depth.
If the probe fails, we should use pm_runtime_disable() to balance
pm_runtime_enable().
Add missing pm_runtime_disable() for serdes_am654_probe().

Fixes: 71e2f5c5c224 ("phy: ti: Add a new SERDES driver for TI's AM654x SoC")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20220301025853.1911-1-linmq006@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

phy: mapphone-mdm6600: Fix PM error handling in phy_mdm6600_probe

[ Upstream commit d644e0d79829b1b9a14beedbdb0dc1256fc3677d ]

The pm_runtime_enable will increase power disable depth.
If the probe fails, we should use pm_runtime_disable() to balance
pm_runtime_enable(). And use pm_runtime_dont_use_autosuspend() to
undo pm_runtime_use_autosuspend()
In the PM Runtime docs:
    Drivers in ->remove() callback should undo the runtime PM changes done
    in ->probe(). Usually this means calling pm_runtime_disable(),
    pm_runtime_dont_use_autosuspend() etc.

We should do this in error handling.

Fixes: f7f50b2a7b05 ("phy: mapphone-mdm6600: Add runtime PM support for n_gsm on USB suspend")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20220301024615.31899-1-linmq006@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: at91: Map MCLK for wm8731 on at91sam9g20ek

[ Upstream commit 0e486fe341fabd8e583f3d601a874cd394979c45 ]

The MCLK of the WM8731 on the AT91SAM9G20-EK board is connected to the
PCK0 output of the SoC and is expected to be set to 12MHz. Previously
this was mapped using pre-common clock API calls in the audio machine
driver but the conversion to the common clock framework broke that so
describe things in the DT instead.

Fixes: ff78a189b0ae55f ("ARM: at91: remove old at91-specific clock driver")
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20220404102806.581374-2-broonie@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

phy: ti: omap-usb2: Fix error handling in omap_usb2_enable_clocks

[ Upstream commit 3588060befff75ff39fab7122b94c6fb3148fcda ]

The corresponding API for clk_prepare_enable is clk_disable_unprepare.
Make sure that the clock is unprepared on exit by changing clk_disable
to clk_disable_unprepare.

Fixes: ed31ee7cf1fe ("phy: ti: usb2: Fix logic on -EPROBE_DEFER")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20220318105748.19532-1-linmq006@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: OMAP2+: Fix refcount leak in omap_gic_of_init

[ Upstream commit 0f83e6b4161617014017a694888dd8743f46f071 ]

The of_find_compatible_node() function returns a node pointer with
refcount incremented, We should use of_node_put() on it when done
Add the missing of_node_put() to release the refcount.

Fixes: fd1c07861491 ("ARM: OMAP4: Fix the init code to have OMAP4460 errata available in DT build")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Message-Id: <20220309104302.18398-1-linmq006@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

phy: samsung: exynos5250-sata: fix missing device put in probe error paths

[ Upstream commit 5c8402c4db45dd55c2c93c8d730f5dfa7c78a702 ]

The actions of of_find_i2c_device_by_node() in probe function should be
reversed in error paths by putting the reference to obtained device.

Fixes: bcff4cba41bc ("PHY: Exynos: Add Exynos5250 SATA PHY driver")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Link: https://lore.kernel.org/r/20220407091857.230386-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

phy: samsung: Fix missing of_node_put() in exynos_sata_phy_probe

[ Upstream commit 388ec8f079f2f20d5cd183c3bc6f33cbc3ffd3ef ]

The device_node pointer is returned by of_parse_phandle() with refcount
incremented. We should use of_node_put() on it when done.

Fixes: bcff4cba41bc ("PHY: Exynos: Add Exynos5250 SATA PHY driver")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220407091857.230386-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: imx6qdl-apalis: Fix sgtl5000 detection issue

[ Upstream commit fa51e1dc4b91375bc18349663a52395ad585bd3c ]

On a custom carrier board with a i.MX6Q Apalis SoM, the sgtl5000 codec
on the SoM is often not detected and the following error message is
seen when the sgtl5000 driver tries to read the ID register:

sgtl5000 1-000a: Error reading chip id -6

The reason for the error is that the MCLK clock is not provided
early enough.

Fix the problem by describing the MCLK pinctrl inside the codec
node instead of placing it inside the audmux pinctrl group.

With this change applied the sgtl5000 is always detected on every boot.

Fixes: 693e3ffaae5a ("ARM: dts: imx6: Add support for Toradex Apalis iMX6Q/D SoM")
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Tim Harvey <tharvey@gateworks.com>
Acked-by: Max Krummenacher <max.krummenacher@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

USB: Fix xhci event ring dequeue pointer ERDP update issue

[ Upstream commit e91ac20889d1a26d077cc511365cd7ff4346a6f3 ]

In some situations software handles TRB events slower than adding TRBs.
If the number of TRB events to be processed in a given interrupt is exactly
the same as the event ring size 256, then the local variable
"event_ring_deq" that holds the initial dequeue position is equal to
software_dequeue after handling all 256 interrupts.

It will cause driver to not update ERDP to hardware,

Software dequeue pointer is out of sync with ERDP on interrupt exit.
On the next interrupt, the event ring may full but driver will not
update ERDP as software_dequeue is equal to ERDP.

[  536.377115] xhci_hcd 0000:00:12.0: ERROR unknown event type 37
[  566.933173] sd 8:0:0:0: [sdb] tag#27 uas_eh_abort_handler 0 uas-tag 7 inflight: CMD OUT
[  566.933181] sd 8:0:0:0: [sdb] tag#27 CDB: Write(10) 2a 00 17 71 e6 78 00 00 08 00
[  572.041186] xhci_hcd On some situataions,the0000:00:12.0: xHCI host not responding to stop endpoint command.
[  572.057193] xhci_hcd 0000:00:12.0: Host halt failed, -110
[  572.057196] xhci_hcd 0000:00:12.0: xHCI host controller not responding, assume dead
[  572.057236] sd 8:0:0:0: [sdb] tag#26 uas_eh_abort_handler 0 uas-tag 6 inflight: CMD
[  572.057240] sd 8:0:0:0: [sdb] tag#26 CDB: Write(10) 2a 00 38 eb cc d8 00 00 08 00
[  572.057244] sd 8:0:0:0: [sdb] tag#25 uas_eh_abort_handler 0 uas-tag 5 inflight: CMD

Hardware ERDP is updated mid event handling if there are more than 128
events in an interrupt (half of ring size).
Fix this by updating the software local variable at the same time as
hardware ERDP.

[commit message rewording -Mathias]

Fixes: dc0ffbea5729 ("usb: host: xhci: update event ring dequeue pointer on purpose")
Reviewed-by: Peter Chen <peter.chen@kernel.org>
Signed-off-by: Weitao Wang <WeitaoWang-oc@zhaoxin.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20220408134823.2527272-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mtd: rawnand: fix ecc parameters for mt7622

[ Upstream commit 9fe4e0d3cbfe90152137963cc024ecb63db6e8e6 ]

According to the datasheet, mt7622 only has 5 ECC capabilities instead
of 7, and the decoding error register is arranged  as follows:
+------+---------+---------+---------+---------+
| Bits |  19:15  |  14:10  |   9:5   |   4:0   |
+------+---------+---------+---------+---------+
| Name | ERRNUM3 | ERRNUM2 | ERRNUM1 | ERRNUM0 |
+------+---------+---------+---------+---------+
This means err_mask should be 0x1f instead of 0x3f and the number of
bits shifted in mtk_ecc_get_stats should be 5 instead of 8.

This commit introduces err_shift for the difference in this register
and fix other existing parameters.

Public MT7622 reference manual can be found on [0] and the info this
commit is based on is from page 656 and page 660.

[0]: https://wiki.banana-pi.org/Banana_Pi_BPI-R64#Documents

Fixes: 98dea8d71931 ("mtd: nand: mtk: Support MT7622 NAND flash controller.")
Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20220402160315.919094-1-gch981213@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: meson: remove CPU opps below 1GHz for SM1 boards

[ Upstream commit fd86d85401c2049f652293877c0f7e6e5afc3bbc ]

Amlogic SM1 devices experience CPU stalls and random board wedges when
the system idles and CPU cores clock down to lower opp points. Recent
vendor kernels include a change to remove 100-250MHz and other distro
sources also remove the 500/667MHz points. Unless all 100-667Mhz opps
are removed or the CPU governor forced to performance stalls are still
observed, so let's remove them to improve stability and uptime.

Fixes: 3d9e76483049 ("arm64: dts: meson-sm1-sei610: enable DVFS")
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20220210100638.19130-3-christianshewitt@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: meson: remove CPU opps below 1GHz for G12B boards

[ Upstream commit 6c4d636bc00dc17c63ffb2a73a0da850240e26e3 ]

Amlogic G12B devices experience CPU stalls and random board wedges when
the system idles and CPU cores clock down to lower opp points. Recent
vendor kernels include a change to remove 100-250MHz and other distro
sources also remove the 500/667MHz points. Unless all 100-667Mhz opps
are removed or the CPU governor forced to performance stalls are still
observed, so let's remove them to improve stability and uptime.

Fixes: b96d4e92709b ("arm64: dts: meson-g12b: support a311d and s922x cpu operating points")
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20220210100638.19130-2-christianshewitt@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

video: fbdev: udlfb: properly check endpoint type

[ Upstream commit aaf7dbe07385e0b8deb7237eca2a79926bbc7091 ]

syzbot reported warning in usb_submit_urb, which is caused by wrong
endpoint type.

This driver uses out bulk endpoint for communication, so
let's check if this endpoint is present and bail out early if not.

Fail log:

usb 1-1: BOGUS urb xfer, pipe 3 != type 1
WARNING: CPU: 0 PID: 4822 at drivers/usb/core/urb.c:493 usb_submit_urb+0xd27/0x1540 drivers/usb/core/urb.c:493
Modules linked in:
CPU: 0 PID: 4822 Comm: kworker/0:3 Tainted: G        W         5.13.0-syzkaller #0
...
Workqueue: usb_hub_wq hub_event
RIP: 0010:usb_submit_urb+0xd27/0x1540 drivers/usb/core/urb.c:493
...
Call Trace:
 dlfb_submit_urb+0x89/0x160 drivers/video/fbdev/udlfb.c:1969
 dlfb_set_video_mode+0x21f0/0x2950 drivers/video/fbdev/udlfb.c:315
 dlfb_ops_set_par+0x2a3/0x840 drivers/video/fbdev/udlfb.c:1110
 dlfb_usb_probe.cold+0x113e/0x1f4a drivers/video/fbdev/udlfb.c:1732
 usb_probe_interface+0x315/0x7f0 drivers/usb/core/driver.c:396

Fixes: 88e58b1a42f8 ("Staging: add udlfb driver")
Reported-and-tested-by: syzbot+53ce4a4246d0fe0fee34@syzkaller.appspotmail.com
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

hex2bin: fix access beyond string end

commit e4d8a29997731b3bb14059024b24df9f784288d0 upstream.

If we pass too short string to "hex2bin" (and the string size without
the terminating NUL character is even), "hex2bin" reads one byte after
the terminating NUL character.  This patch fixes it.

Note that hex_to_bin returns -1 on error and hex2bin return -EINVAL on
error - so we can't just return the variable "hi" or "lo" on error.
This inconsistency may be fixed in the next merge window, but for the
purpose of fixing this bug, we just preserve the existing behavior and
return -1 and -EINVAL.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Fixes: b78049831ffe ("lib: add error checking to hex2bin")
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

hex2bin: make the function hex_to_bin constant-time

commit e5be15767e7e284351853cbaba80cde8620341fb upstream.

The function hex2bin is used to load cryptographic keys into device
mapper targets dm-crypt and dm-integrity.  It should take constant time
independent on the processed data, so that concurrently running
unprivileged code can't infer any information about the keys via
microarchitectural convert channels.

This patch changes the function hex_to_bin so that it contains no
branches and no memory accesses.

Note that this shouldn't cause performance degradation because the size
of the new function is the same as the size of the old function (on
x86-64) - and the new function causes no branch misprediction penalties.

I compile-tested this function with gcc on aarch64 alpha arm hppa hppa64
i386 ia64 m68k mips32 mips64 powerpc powerpc64 riscv sh4 s390x sparc32
sparc64 x86_64 and with clang on aarch64 arm hexagon i386 mips32 mips64
powerpc powerpc64 s390x sparc32 sparc64 x86_64 to verify that there are
no branches in the generated code.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arch_topology: Do not set llc_sibling if llc_id is invalid

commit 1dc9f1a66e1718479e1c4f95514e1750602a3cb9 upstream.

When ACPI is not enabled, cpuid_topo->llc_id = cpu_topo->llc_id = -1, which
will set llc_sibling 0xff(...), this is misleading.

Don't set llc_sibling(default 0) if we don't know the cache topology.

Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Wang Qing <wangqing@vivo.com>
Fixes: 37c3ec2d810f ("arm64: topology: divorce MC scheduling domain from core_siblings")
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/1649644580-54626-1-git-send-email-wangqing@vivo.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

serial: 8250: Correct the clock for EndRun PTP/1588 PCIe device

commit 637674fa40059cddcc3ad2212728965072f62ea3 upstream.

The EndRun PTP/1588 dual serial port device is based on the Oxford
Semiconductor OXPCIe952 UART device with the PCI vendor:device ID set
for EndRun Technologies and is therefore driven by a fixed 62.5MHz clock
input derived from the 100MHz PCI Express clock.  The clock rate is
divided by the oversampling rate of 16 as it is supplied to the baud
rate generator, yielding the baud base of 3906250.

Replace the incorrect baud base of 4000000 with the right value of
3906250 then, complementing commit 6cbe45d8ac93 ("serial: 8250: Correct
the clock for OxSemi PCIe devices").

Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Cc: stable <stable@kernel.org>
Fixes: 1bc8cde46a159 ("8250_pci: Added driver for Endrun Technologies PTP PCIe card.")
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/alpine.DEB.2.21.2204181515270.9383@angie.orcam.me.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

serial: 8250: Also set sticky MCR bits in console restoration

commit 6e6eebdf5e2455f089ccd000754a0deaeb79af82 upstream.

Sticky MCR bits are lost in console restoration if console suspending
has been disabled.  This currently affects the AFE bit, which works in
combination with RTS which we set, so we want to make sure the UART
retains control of its FIFO where previously requested.  Also specific
drivers may need other bits in the future.

Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Fixes: 4516d50aabed ("serial: 8250: Use canary to restart console after suspend")
Cc: stable@vger.kernel.org # v4.0+
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/alpine.DEB.2.21.2204181518490.9383@angie.orcam.me.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

serial: imx: fix overrun interrupts in DMA mode

commit 3ee82c6e41f3d2212647ce0bc5a05a0f69097824 upstream.

Commit 76821e222c18 ("serial: imx: ensure that RX irqs are off if RX is
off") accidentally enabled overrun interrupts unconditionally when
deferring DMA enable until after the receiver has been enabled during
startup.

Fix this by using the DMA-initialised instead of DMA-enabled flag to
determine whether overrun interrupts should be enabled.

Note that overrun interrupts are already accounted for in
imx_uart_clear_rx_errors() when using DMA since commit 41d98b5da92f
("serial: imx-serial - update RX error counters when DMA is used").

Fixes: 76821e222c18 ("serial: imx: ensure that RX irqs are off if RX is off")
Cc: stable@vger.kernel.org # 4.17
Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20220411081957.7846-1-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: dwc3: gadget: Return proper request status

commit c7428dbddcf4ea1919e1c8e15f715b94ca359268 upstream.

If the user sets the usb_request's no_interrupt, then there will be no
completion event for the request. Currently the driver incorrectly uses
the event status of a different request to report the status for a
request with no_interrupt. The dwc3 driver needs to check the TRB status
associated with the request when reporting its status.

Note: this is only applicable to missed_isoc TRB completion status, but
the other status are also listed for completeness/documentation.

Fixes: 6d8a019614f3 ("usb: dwc3: gadget: check for Missed Isoc from event status")
Cc: <stable@vger.kernel.org>
Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/db2c80108286cfd108adb05bad52138b78d7c3a7.1650673655.git.Thinh.Nguyen@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: dwc3: core: Fix tx/rx threshold settings

commit f28ad9069363dec7deb88032b70612755eed9ee6 upstream.

The current driver logic checks against 0 to determine whether the
periodic tx/rx threshold settings are set, but we may get bogus values
from uninitialized variables if no device property is set. Properly
default these variables to 0.

Fixes: 938a5ad1d305 ("usb: dwc3: Check for ESS TX/RX threshold config")
Cc: <stable@vger.kernel.org>
Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/cccfce990b11b730b0dae42f9d217dc6fb988c90.1649727139.git.Thinh.Nguyen@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: gadget: configfs: clear deactivation flag in configfs_composite_unbind()

commit bf95c4d4630c7a2c16e7b424fdea5177d9ce0864 upstream.

If any function like UVC is deactivating gadget as part of composition
switch which results in not calling pullup enablement, it is not getting
enabled after switch to new composition due to this deactivation flag
not cleared. This results in USB enumeration not happening after switch
to new USB composition. Hence clear deactivation flag inside gadget
structure in configfs_composite_unbind() before switch to new USB
composition.

Signed-off-by: Vijayavardhan Vennapusa <vvreddy@codeaurora.org>
Signed-off-by: Dan Vacura <w36195@motorola.com>
Cc: stable <stable@kernel.org>
Link: https://lore.kernel.org/r/20220413211038.72797-1-w36195@motorola.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: gadget: uvc: Fix crash when encoding data for usb request

commit 71d471e3faf90c9674cadc7605ac719e82cb7fac upstream.

During the uvcg_video_pump() process, if an error occurs and
uvcg_queue_cancel() is called, the buffer queue will be cleared out, but
the current marker (queue->buf_used) of the active buffer (no longer
active) is not reset. On the next iteration of uvcg_video_pump() the
stale buf_used count will be used and the logic of min((unsigned
int)len, buf->bytesused - queue->buf_used) may incorrectly calculate a
nbytes size, causing an invalid memory access.

[80802.185460][  T315] configfs-gadget gadget: uvc: VS request completed
with status -18.
[80802.185519][  T315] configfs-gadget gadget: uvc: VS request completed
with status -18.
...
uvcg_queue_cancel() is called and the queue is cleared out, but the
marker queue->buf_used is not reset.
...
[80802.262328][ T8682] Unable to handle kernel paging request at virtual
address ffffffc03af9f000
...
...
[80802.263138][ T8682] Call trace:
[80802.263146][ T8682]  __memcpy+0x12c/0x180
[80802.263155][ T8682]  uvcg_video_pump+0xcc/0x1e0
[80802.263165][ T8682]  process_one_work+0x2cc/0x568
[80802.263173][ T8682]  worker_thread+0x28c/0x518
[80802.263181][ T8682]  kthread+0x160/0x170
[80802.263188][ T8682]  ret_from_fork+0x10/0x18
[80802.263198][ T8682] Code: a8c12829 a88130cb a8c130

Fixes: d692522577c0 ("usb: gadget/uvc: Port UVC webcam gadget to use videobuf2 framework")
Cc: <stable@vger.kernel.org>
Signed-off-by: Dan Vacura <w36195@motorola.com>
Link: https://lore.kernel.org/r/20220331184024.23918-1-w36195@motorola.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: typec: ucsi: Fix role swapping

commit eb5d7ff3cf0d55093c619b5ad107cd5c05ce8134 upstream.

All attempts to swap the roles timed out because the
completion was done without releasing the port lock. Fixing
that by releasing the lock before starting to wait for the
completion.

Link: https://lore.kernel.org/linux-usb/037de7ac-e210-bdf5-ec7a-8c0c88a0be20@gmail.com/
Fixes: ad74b8649bea ("usb: typec: ucsi: Preliminary support for alternate modes")
Cc: stable@vger.kernel.org
Reported-and-tested-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20220405134824.68067-3-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: misc: fix improper handling of refcount in uss720_probe()

commit 0a96fa640dc928da9eaa46a22c46521b037b78ad upstream.

usb_put_dev shouldn't be called when uss720_probe succeeds because of
priv->usbdev. At the same time, priv->usbdev shouldn't be set to NULL
before destroy_priv in uss720_disconnect because usb_put_dev is in
destroy_priv.

Fix this by moving priv->usbdev = NULL after usb_put_dev.

Fixes: dcb4b8ad6a44 ("misc/uss720: fix memory leak in uss720_probe")
Cc: stable <stable@kernel.org>
Reviewed-by: Dongliang Mu <mudongliangabcd@gmail.com>
Signed-off-by: Hangyu Hua <hbh25y@gmail.com>
Link: https://lore.kernel.org/r/20220407024001.11761-1-hbh25y@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: magnetometer: ak8975: Fix the error handling in ak8975_power_on()

commit 3a26787dacf04257a68b16315c984eb2c340bc5e upstream.

When the driver fails to enable the regulator 'vid', we will get the
following splat:

[   79.955610] WARNING: CPU: 5 PID: 441 at drivers/regulator/core.c:2257 _regulator_put+0x3ec/0x4e0
[   79.959641] RIP: 0010:_regulator_put+0x3ec/0x4e0
[   79.967570] Call Trace:
[   79.967773]  <TASK>
[   79.967951]  regulator_put+0x1f/0x30
[   79.968254]  devres_release_group+0x319/0x3d0
[   79.968608]  i2c_device_probe+0x766/0x940

Fix this by disabling the 'vdd' regulator when failing to enable 'vid'
regulator.

Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Link: https://lore.kernel.org/r/20220409034849.3717231-2-zheyuma97@gmail.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: dac: ad5446: Fix read_raw not returning set value

commit 89a01cd688d3c0ac983ef0b0e5f40018ab768317 upstream.

read_raw should return the un-scaled value.

Fixes: 5e06bdfb46e8b ("staging:iio:dac:ad5446: Return cached value for 'raw' attribute")
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20220406105620.1171340-1-michael.hennerich@analog.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: dac: ad5592r: Fix the missing return value.

commit b55b38f7cc12da3b9ef36e7a3b7f8f96737df4d5 upstream.

The third call to `fwnode_property_read_u32` did not record
the return value, resulting in `channel_offstate` possibly
being assigned the wrong value.

Fixes: 56ca9db862bf ("iio: dac: Add support for the AD5592R/AD5593R ADCs/DACs")
Signed-off-by: Zizhuang Deng <sunsetdzz@gmail.com>
Link: https://lore.kernel.org/r/20220310125450.4164164-1-sunsetdzz@gmail.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xhci: increase usb U3 -> U0 link resume timeout from 100ms to 500ms

commit 33597f0c48be0836854d43c577e35c8f8a765a7d upstream.

The first U3 wake signal by the host may be lost if the USB 3 connection is
tunneled over USB4, with a runtime suspended USB4 host, and firmware
implemented connection manager.

Specs state the host must wait 100ms (tU3WakeupRetryDelay) before
resending a U3 wake signal if device doesn't respond, leading to U3 -> U0
link transition times around 270ms in the tunneled case.

Fixes: 0200b9f790b0 ("xhci: Wait until link state trainsits to U0 after setting USB_SS_PORT_LS_U0")
Cc: stable@vger.kernel.org
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20220408134823.2527272-4-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xhci: stop polling roothubs after shutdown

commit dc92944a014cd6a6f6c94299aaa36164dd2c238a upstream.

While rebooting, XHCI controller and its bus device will be shut down
in order by .shutdown callback. Stopping roothubs polling in
xhci_shutdown() can prevent XHCI driver from accessing port status
after its bus device shutdown.

Take PCIe XHCI controller as example, if XHCI driver doesn't stop roothubs
polling, XHCI driver may access PCIe BAR register for port status after
parent PCIe root port driver is shutdown and cause PCIe bus error.

[check shared hcd exist before stopping its roothub polling -Mathias]

Cc: stable@vger.kernel.org
Signed-off-by: Henry Lin <henryl@nvidia.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20220408134823.2527272-3-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: option: add Telit 0x1057, 0x1058, 0x1075 compositions

commit f32c5a0423400e01f4d7c607949fa3a1f006e8fa upstream.

Add support for the following Telit FN980 and FN990 compositions:

0x1057: tty, adb, rmnet, tty, tty, tty, tty, tty
0x1058: tty, adb, tty, tty, tty, tty, tty
0x1075: adb, tty

Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
Link: https://lore.kernel.org/r/20220406141408.580669-1-dnlplm@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: option: add support for Cinterion MV32-WA/MV32-WB

commit b4a64ed6e7b857317070fcb9d87ff5d4a73be3e8 upstream.

Add support for Cinterion device MV32-WA/MV32-WB. MV32-WA PID is
0x00F1, and MV32-WB PID is 0x00F2.

Test evidence as below:
T:  Bus=04 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#=  4 Spd=5000 MxCh= 0
D:  Ver= 3.20 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs=  1
P:  Vendor=1e2d ProdID=00f1 Rev=05.04
S:  Manufacturer=Cinterion
S:  Product=Cinterion PID 0x00F1 USB Mobile Broadband
S:  SerialNumber=78ada8c4
C:  #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=896mA
I:  If#=0x0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim
I:  If#=0x1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
I:  If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
I:  If#=0x3 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
I:  If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option
I:  If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option

T:  Bus=04 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#=  3 Spd=5000 MxCh= 0
D:  Ver= 3.20 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs=  1
P:  Vendor=1e2d ProdID=00f2 Rev=05.04
S:  Manufacturer=Cinterion
S:  Product=Cinterion PID 0x00F2 USB Mobile Broadband
S:  SerialNumber=cdd06a78
C:  #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=896mA
I:  If#=0x0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim
I:  If#=0x1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
I:  If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
I:  If#=0x3 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
I:  If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option
I:  If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option

Interface 0&1: MBIM, 2:Modem, 3: GNSS, 4: NMEA, 5: Diag
GNSS port don't use serial driver.

Signed-off-by: Slark Xiao <slark_xiao@163.com>
Link: https://lore.kernel.org/r/20220414074434.5699-1-slark_xiao@163.com
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: cp210x: add PIDs for Kamstrup USB Meter Reader

commit 35a923a0b329c343e9e81d79518e2937eba06fcd upstream.

Wireless reading of water and heat meters using 868 MHz wM-Bus mode C1.

The two different product IDs allow detection of dongle antenna
solution:
- Internal antenna
- External antenna using SMA connector

https://www.kamstrup.com/en-en/water-solutions/water-meter-reading/usb-meter-reader

Signed-off-by: Bruno Thomsen <bruno.thomsen@gmail.com>
Link: https://lore.kernel.org/r/20220414081202.5591-1-bruno.thomsen@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: whiteheat: fix heap overflow in WHITEHEAT_GET_DTR_RTS

commit e23e50e7acc8d8f16498e9c129db33e6a00e80eb upstream.

The sizeof(struct whitehat_dr_info) can be 4 bytes under CONFIG_AEABI=n
due to "-mabi=apcs-gnu", even though it has a single u8:

whiteheat_private {
        __u8                       mcr;                  /*     0     1 */

        /* size: 4, cachelines: 1, members: 1 */
        /* padding: 3 */
        /* last cacheline: 4 bytes */
};

The result is technically harmless, as both the source and the
destinations are currently the same allocation size (4 bytes) and don't
use their padding, but if anything were to ever be added after the
"mcr" member in "struct whiteheat_private", it would be overwritten. The
structs both have a single u8 "mcr" member, but are 4 bytes in padded
size. The memcpy() destination was explicitly targeting the u8 member
(size 1) with the length of the whole structure (size 4), triggering
the memcpy buffer overflow warning:

In file included from include/linux/string.h:253,
                 from include/linux/bitmap.h:11,
                 from include/linux/cpumask.h:12,
                 from include/linux/smp.h:13,
                 from include/linux/lockdep.h:14,
                 from include/linux/spinlock.h:62,
                 from include/linux/mmzone.h:8,
                 from include/linux/gfp.h:6,
                 from include/linux/slab.h:15,
                 from drivers/usb/serial/whiteheat.c:17:
In function 'fortify_memcpy_chk',
    inlined from 'firm_send_command' at drivers/usb/serial/whiteheat.c:587:4:
include/linux/fortify-string.h:328:25: warning: call to '__write_overflow_field' declared with attribute warning: detected write beyond size of field (1st parameter); maybe use struct_group()? [-Wattribute-warning]
  328 |                         __write_overflow_field(p_size_field, size);
      |                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Instead, just assign the one byte directly.

Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/lkml/202204142318.vDqjjSFn-lkp@intel.com
Cc: stable@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20220421001234.2421107-1-keescook@chromium.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: quirks: add STRING quirk for VCOM device

commit ec547af8a9ea6441864bad34172676b5652ceb96 upstream.

This has been reported to stall if queried

Cc: stable <stable@vger.kernel.org>
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Link: https://lore.kernel.org/r/20220414123152.1700-1-oneukum@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: quirks: add a Realtek card reader

commit 2a7ccf6bb6f147f64c025ad68f4255d8e1e0ce6d upstream.

This device is reported to stall when enummerated.

Cc: stable <stable@vger.kernel.org>
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Link: https://lore.kernel.org/r/20220414110209.30924-1-oneukum@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: mtu3: fix USB 3.0 dual-role-switch from device to host

commit 456244aeecd54249096362a173dfe06b82a5cafa upstream.

Issue description:
  When an OTG port has been switched to device role and then switch back
  to host role again, the USB 3.0 Host (XHCI) will not be able to detect
  "plug in event of a connected USB 2.0/1.0 ((Highspeed and Fullspeed)
  devices until system reboot.

Root cause and Solution:
  There is a condition checking flag "ssusb->otg_switch.is_u3_drd" in
  toggle_opstate(). At the end of role switch procedure, toggle_opstate()
  will be called to set DC_SESSION and SOFT_CONN bit. If "is_u3_drd" was
  set and switched the role to USB host 3.0, bit DC_SESSION and SOFT_CONN
  will be skipped hence caused the port cannot detect connected USB 2.0
  (Highspeed and Fullspeed) devices. Simply remove the condition check to
  solve this issue.

Fixes: d0ed062a8b75 ("usb: mtu3: dual-role mode support")
Cc: stable@vger.kernel.org
Tested-by: Fabien Parent <fparent@baylibre.com>
Reviewed-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com>
Signed-off-by: Tainping Fang <tianping.fang@mediatek.com>
Link: https://lore.kernel.org/r/20220419081245.21015-1-macpaul.lin@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

lightnvm: disable the subsystem

In commit 9ea9b9c48387 ("remove the lightnvm subsystem") the lightnvm
subsystem was removed as there is no hardware in the wild for it, and
the code is known to have problems.  This should also be disabled for
older LTS kernels as well to prevent anyone from accidentally using it.

Cc: Christoph Hellwig <hch@lst.de>
Cc: Matias Bjørling <mb@lightnvm.io>
Cc: Javier González <javier@javigon.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

hamradio: remove needs_free_netdev to avoid UAF

commit 81b1d548d00bcd028303c4f3150fa753b9b8aa71 upstream.

The former patch "defer 6pack kfree after unregister_netdev" reorders
the kfree of two buffer after the unregister_netdev to prevent the race
condition. It also adds free_netdev() function in sixpack_close(), which
is a direct copy from the similar code in mkiss_close().

However, in sixpack driver, the flag needs_free_netdev is set to true in
sp_setup(), hence the unregister_netdev() will free the netdev
automatically. Therefore, as the sp is netdev_priv, use-after-free
occurs.

This patch removes the needs_free_netdev = true and just let the
free_netdev to finish this deallocation task.

Fixes: 0b9111922b1f ("hamradio: defer 6pack kfree after unregister_netdev")
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Link: https://lore.kernel.org/r/20211111141402.7551-1-linma@zju.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

hamradio: defer 6pack kfree after unregister_netdev

commit 0b9111922b1f399aba6ed1e1b8f2079c3da1aed8 upstream.

There is a possible race condition (use-after-free) like below

 (USE)                       |  (FREE)
  dev_queue_xmit             |
   __dev_queue_xmit          |
    __dev_xmit_skb           |
     sch_direct_xmit         | ...
      xmit_one               |
       netdev_start_xmit     | tty_ldisc_kill
        __netdev_start_xmit  |  6pack_close
         sp_xmit             |   kfree
          sp_encaps          |
                             |

According to the patch "defer ax25 kfree after unregister_netdev", this
patch reorder the kfree after the unregister_netdev to avoid the possible
UAF as the unregister_netdev() is well synchronized and won't return if
there is a running routine.

Signed-off-by: Lin Ma <linma@zju.edu.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

floppy: disable FDRAWCMD by default

commit 233087ca063686964a53c829d547c7571e3f67bf upstream.

Minh Yuan reported a concurrency use-after-free issue in the floppy code
between raw_cmd_ioctl and seek_interrupt.

[ It turns out this has been around, and that others have reported the
  KASAN splats over the years, but Minh Yuan had a reproducer for it and
  so gets primary credit for reporting it for this fix   - Linus ]

The problem is, this driver tends to break very easily and nowadays,
nobody is expected to use FDRAWCMD anyway since it was used to
manipulate non-standard formats.  The risk of breaking the driver is
higher than the risk presented by this race, and accessing the device
requires privileges anyway.

Let's just add a config option to completely disable this ioctl and
leave it disabled by default.  Distros shouldn't use it, and only those
running on antique hardware might need to enable it.

Link: https://lore.kernel.org/all/000000000000b71cdd05d703f6bf@google.com/
Link: https://lore.kernel.org/lkml/CAKcFiNC=MfYVW-Jt9A3=FPJpTwCD2PL_ULNCpsCVE5s8ZeBQgQ@mail.gmail.com
Link: https://lore.kernel.org/all/CAEAjamu1FRhz6StCe_55XY5s389ZP_xmCF69k987En+1z53=eg@mail.gmail.com
Reported-by: Minh Yuan <yuanmingbuaa@gmail.com>
Reported-by: syzbot+8e8958586909d62b6840@syzkaller.appspotmail.com
Reported-by: cruise k <cruise4k@gmail.com>
Reported-by: Kyungtae Kim <kt0755@gmail.com>
Suggested-by: Linus Torvalds <torvalds@linuxfoundation.org>
Tested-by: Denis Efremov <efremov@linux.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 5.4.191

Link: https://lore.kernel.org/r/20220426081737.209637816@linuxfoundation.org
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "net: micrel: fix KS8851_MLL Kconfig"

This reverts commit 4cd3c9e070d6a9a9dc76a5ffa79114953bf69087 which is
commit c3efcedd272aa6dd5929e20cf902a52ddaa1197a upstream.

The upstream commit c3efcedd272a ("net: micrel: fix KS8851_MLL Kconfig")
depends on e5f31552674e ("ethernet: fix PTP_1588_CLOCK dependencies")
which is not part of Linux 5.4.y . Revert the aforementioned commit to
prevent breakage in 5.4.y .

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: David S. Miller <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Sasha Levin <sashal@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

block/compat_ioctl: fix range check in BLKGETSIZE

commit ccf16413e520164eb718cf8b22a30438da80ff23 upstream.

kernel ulong and compat_ulong_t may not be same width. Use type directly
to eliminate mismatches.

This would result in truncation rather than EFBIG for 32bit mode for
large disks.

Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Khazhismel Kumykov <khazhy@google.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20220414224056.2875681-1-khazhy@google.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ion: Prevent incorrect reference counting behavour

Supply additional check in order to prevent unexpected results.

Fixes: b892bf75b2034 ("ion: Switch ion to use dma-buf")
Suggested-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

spi: atmel-quadspi: Fix the buswidth adjustment between spi-mem and controller

commit 8c235cc25087495c4288d94f547e9d3061004991 upstream.

Use the spi_mem_default_supports_op() core helper in order to take into
account the buswidth specified by the user in device tree.

Cc: <stable@vger.kernel.org>
Fixes: 0e6aae08e9ae ("spi: Add QuadSPI driver for Atmel SAMA5D2")
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Link: https://lore.kernel.org/r/20220406133604.455356-1-tudor.ambarus@microchip.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

jbd2: fix a potential race while discarding reserved buffers after an abort

commit 23e3d7f7061f8682c751c46512718f47580ad8f0 upstream.

we got issue as follows:
[   72.796117] EXT4-fs error (device sda): ext4_journal_check_start:83: comm fallocate: Detected aborted journal
[   72.826847] EXT4-fs (sda): Remounting filesystem read-only
fallocate: fallocate failed: Read-only file system
[   74.791830] jbd2_journal_commit_transaction: jh=0xffff9cfefe725d90 bh=0x0000000000000000 end delay
[   74.793597] ------------[ cut here ]------------
[   74.794203] kernel BUG at fs/jbd2/transaction.c:2063!
[   74.794886] invalid opcode: 0000 [#1] PREEMPT SMP PTI
[   74.795533] CPU: 4 PID: 2260 Comm: jbd2/sda-8 Not tainted 5.17.0-rc8-next-20220315-dirty #150
[   74.798327] RIP: 0010:__jbd2_journal_unfile_buffer+0x3e/0x60
[   74.801971] RSP: 0018:ffffa828c24a3cb8 EFLAGS: 00010202
[   74.802694] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
[   74.803601] RDX: 0000000000000001 RSI: ffff9cfefe725d90 RDI: ffff9cfefe725d90
[   74.804554] RBP: ffff9cfefe725d90 R08: 0000000000000000 R09: ffffa828c24a3b20
[   74.805471] R10: 0000000000000001 R11: 0000000000000001 R12: ffff9cfefe725d90
[   74.806385] R13: ffff9cfefe725d98 R14: 0000000000000000 R15: ffff9cfe833a4d00
[   74.807301] FS:  0000000000000000(0000) GS:ffff9d01afb00000(0000) knlGS:0000000000000000
[   74.808338] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   74.809084] CR2: 00007f2b81bf4000 CR3: 0000000100056000 CR4: 00000000000006e0
[   74.810047] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[   74.810981] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[   74.811897] Call Trace:
[   74.812241]  <TASK>
[   74.812566]  __jbd2_journal_refile_buffer+0x12f/0x180
[   74.813246]  jbd2_journal_refile_buffer+0x4c/0xa0
[   74.813869]  jbd2_journal_commit_transaction.cold+0xa1/0x148
[   74.817550]  kjournald2+0xf8/0x3e0
[   74.819056]  kthread+0x153/0x1c0
[   74.819963]  ret_from_fork+0x22/0x30

Above issue may happen as follows:
        write                   truncate                   kjournald2
generic_perform_write
 ext4_write_begin
  ext4_walk_page_buffers
   do_journal_get_write_access ->add BJ_Reserved list
 ext4_journalled_write_end
  ext4_walk_page_buffers
   write_end_fn
    ext4_handle_dirty_metadata
                ***************JBD2 ABORT**************
     jbd2_journal_dirty_metadata
 -> return -EROFS, jh in reserved_list
                                                   jbd2_journal_commit_transaction
                                                    while (commit_transaction->t_reserved_list)
                                                      jh = commit_transaction->t_reserved_list;
                        truncate_pagecache_range
                         do_invalidatepage
  ext4_journalled_invalidatepage
   jbd2_journal_invalidatepage
    journal_unmap_buffer
     __dispose_buffer
      __jbd2_journal_unfile_buffer
       jbd2_journal_put_journal_head ->put last ref_count
        __journal_remove_journal_head
 bh->b_private = NULL;
 jh->b_bh = NULL;
                      jbd2_journal_refile_buffer(journal, jh);
bh = jh2bh(jh);
->bh is NULL, later will trigger null-ptr-deref
 journal_free_journal_head(jh);

After commit 96f1e0974575, we no longer hold the j_state_lock while
iterating over the list of reserved handles in
jbd2_journal_commit_transaction().  This potentially allows the
journal_head to be freed by journal_unmap_buffer while the commit
codepath is also trying to free the BJ_Reserved buffers.  Keeping
j_state_lock held while trying extends hold time of the lock
minimally, and solves this issue.

Fixes: 96f1e0974575("jbd2: avoid long hold times of j_state_lock while committing a transaction")
Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220317142137.1821590-1-yebin10@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: force overhead calculation if the s_overhead_cluster makes no sense

commit 85d825dbf4899a69407338bae462a59aa9a37326 upstream.

If the file system does not use bigalloc, calculating the overhead is
cheap, so force the recalculation of the overhead so we don't have to
trust the precalculated overhead in the superblock.

Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: fix overhead calculation to account for the reserved gdt blocks

commit 10b01ee92df52c8d7200afead4d5e5f55a5c58b1 upstream.

The kernel calculation was underestimating the overhead by not taking
into account the reserved gdt blocks.  With this change, the overhead
calculated by the kernel matches the overhead calculation in mke2fs.

Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4, doc: fix incorrect h_reserved size

commit 7102ffe4c166ca0f5e35137e9f9de83768c2d27d upstream.

According to document and code, ext4_xattr_header's size is 32 bytes, so
h_reserved size should be 3.

Signed-off-by: Wang Jianjian <wangjianjian3@huawei.com>
Link: https://lore.kernel.org/r/92fcc3a6-7d77-8c09-4126-377fcb4c46a5@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: limit length to bitmap_maxbytes - blocksize in punch_hole

commit 2da376228a2427501feb9d15815a45dbdbdd753e upstream.

Syzbot found an issue [1] in ext4_fallocate().
The C reproducer [2] calls fallocate(), passing size 0xffeffeff000ul,
and offset 0x1000000ul, which, when added together exceed the
bitmap_maxbytes for the inode. This triggers a BUG in
ext4_ind_remove_space(). According to the comments in this function
the 'end' parameter needs to be one block after the last block to be
removed. In the case when the BUG is triggered it points to the last
block. Modify the ext4_punch_hole() function and add constraint that
caps the length to satisfy the one before laster block requirement.

LINK: [1] https://syzkaller.appspot.com/bug?id=b80bd9cf348aac724a4f4dff251800106d721331
LINK: [2] https://syzkaller.appspot.com/text?tag=ReproC&x=14ba0238700000

Fixes: a4bb6b64e39a ("ext4: enable "punch hole" functionality")
Reported-by: syzbot+7a806094edd5d07ba029@syzkaller.appspotmail.com
Signed-off-by: Tadeusz Struk <tadeusz.struk@linaro.org>
Link: https://lore.kernel.org/r/20220331200515.153214-1-tadeusz.struk@linaro.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: fix use-after-free in ext4_search_dir

commit c186f0887fe7061a35cebef024550ec33ef8fbd8 upstream.

We got issue as follows:
EXT4-fs (loop0): mounted filesystem without journal. Opts: ,errors=continue
==================================================================
BUG: KASAN: use-after-free in ext4_search_dir fs/ext4/namei.c:1394 [inline]
BUG: KASAN: use-after-free in search_dirblock fs/ext4/namei.c:1199 [inline]
BUG: KASAN: use-after-free in __ext4_find_entry+0xdca/0x1210 fs/ext4/namei.c:1553
Read of size 1 at addr ffff8881317c3005 by task syz-executor117/2331

CPU: 1 PID: 2331 Comm: syz-executor117 Not tainted 5.10.0+ #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014
Call Trace:
 __dump_stack lib/dump_stack.c:83 [inline]
 dump_stack+0x144/0x187 lib/dump_stack.c:124
 print_address_description+0x7d/0x630 mm/kasan/report.c:387
 __kasan_report+0x132/0x190 mm/kasan/report.c:547
 kasan_report+0x47/0x60 mm/kasan/report.c:564
 ext4_search_dir fs/ext4/namei.c:1394 [inline]
 search_dirblock fs/ext4/namei.c:1199 [inline]
 __ext4_find_entry+0xdca/0x1210 fs/ext4/namei.c:1553
 ext4_lookup_entry fs/ext4/namei.c:1622 [inline]
 ext4_lookup+0xb8/0x3a0 fs/ext4/namei.c:1690
 __lookup_hash+0xc5/0x190 fs/namei.c:1451
 do_rmdir+0x19e/0x310 fs/namei.c:3760
 do_syscall_64+0x33/0x40 arch/x86/entry/common.c:46
 entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x445e59
Code: 4d c7 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 1b c7 fb ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007fff2277fac8 EFLAGS: 00000246 ORIG_RAX: 0000000000000054
RAX: ffffffffffffffda RBX: 0000000000400280 RCX: 0000000000445e59
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 00000000200000c0
RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000002
R10: 00007fff2277f990 R11: 0000000000000246 R12: 0000000000000000
R13: 431bde82d7b634db R14: 0000000000000000 R15: 0000000000000000

The buggy address belongs to the page:
page:0000000048cd3304 refcount:0 mapcount:0 mapping:0000000000000000 index:0x1 pfn:0x1317c3
flags: 0x200000000000000()
raw: 0200000000000000 ffffea0004526588 ffffea0004528088 0000000000000000
raw: 0000000000000001 0000000000000000 00000000ffffffff 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
 ffff8881317c2f00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 ffff8881317c2f80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>ffff8881317c3000: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
                   ^
 ffff8881317c3080: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 ffff8881317c3100: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
==================================================================

ext4_search_dir:
  ...
  de = (struct ext4_dir_entry_2 *)search_buf;
  dlimit = search_buf + buf_size;
  while ((char *) de < dlimit) {
  ...
    if ((char *) de + de->name_len <= dlimit &&
 ext4_match(dir, fname, de)) {
    ...
    }
  ...
    de_len = ext4_rec_len_from_disk(de->rec_len, dir->i_sb->s_blocksize);
    if (de_len <= 0)
      return -1;
    offset += de_len;
    de = (struct ext4_dir_entry_2 *) ((char *) de + de_len);
  }

Assume:
de=0xffff8881317c2fff
dlimit=0x0xffff8881317c3000

If read 'de->name_len' which address is 0xffff8881317c3005, obviously is
out of range, then will trigger use-after-free.
To solve this issue, 'dlimit' must reserve 8 bytes, as we will read
'de->name_len' to judge if '(char *) de + de->name_len' out of range.

Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220324064816.1209985-1-yebin10@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: fix symlink file size not match to file content

commit a2b0b205d125f27cddfb4f7280e39affdaf46686 upstream.

We got issue as follows:
[home]# fsck.ext4  -fn  ram0yb
e2fsck 1.45.6 (20-Mar-2020)
Pass 1: Checking inodes, blocks, and sizes
Pass 2: Checking directory structure
Symlink /p3/d14/d1a/l3d (inode #3494) is invalid.
Clear? no
Entry 'l3d' in /p3/d14/d1a (3383) has an incorrect filetype (was 7, should be 0).
Fix? no

As the symlink file size does not match the file content. If the writeback
of the symlink data block failed, ext4_finish_bio() handles the end of IO.
However this function fails to mark the buffer with BH_write_io_error and
so when unmount does journal checkpoint it cannot detect the writeback
error and will cleanup the journal. Thus we've lost the correct data in the
journal area. To solve this issue, mark the buffer as BH_write_io_error in
ext4_finish_bio().

Cc: stable@kernel.org
Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220321144438.201685-1-yebin10@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm_pmu: Validate single/group leader events

commit e5c23779f93d45e39a52758ca593bd7e62e9b4be upstream.

In the case where there is only a cycle counter available (i.e.
PMCR_EL0.N is 0) and an event other than CPU cycles is opened, the open
should fail as the event can never possibly be scheduled. However, the
event validation when an event is opened is skipped when the group
leader is opened. Fix this by always validating the group leader events.

Reported-by: Al Grant <al.grant@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20220408203330.4014015-1-robh@kernel.org
Cc: <stable@vger.kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARC: entry: fix syscall_trace_exit argument

commit b1c6ecfdd06907554518ec384ce8e99889d15193 upstream.

Function syscall_trace_exit expects pointer to pt_regs. However
r0 is also used to keep syscall return value. Restore pointer
to pt_regs before calling syscall_trace_exit.

Cc: <stable@vger.kernel.org>
Signed-off-by: Sergey Matyukevich <sergey.matyukevich@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

e1000e: Fix possible overflow in LTR decoding

commit 04ebaa1cfddae5f240cc7404f009133bb0389a47 upstream.

When we decode the latency and the max_latency, u16 value may not fit
the required size and could lead to the wrong LTR representation.

Scaling is represented as:
scale 0 - 1         (2^(5*0)) = 2^0
scale 1 - 32        (2^(5 *1))= 2^5
scale 2 - 1024      (2^(5 *2)) =2^10
scale 3 - 32768     (2^(5 *3)) =2^15
scale 4 - 1048576   (2^(5 *4)) = 2^20
scale 5 - 33554432  (2^(5 *4)) = 2^25
scale 4 and scale 5 required 20 and 25 bits respectively.
scale 6 reserved.

Replace the u16 type with the u32 type and allow corrected LTR
representation.

Cc: stable@vger.kernel.org
Fixes: 44a13a5d99c7 ("e1000e: Fix the max snoop/no-snoop latency for 10M")
Reported-by: James Hutchinson <jahutchinson99@googlemail.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215689
Suggested-by: Dima Ruinskiy <dima.ruinskiy@intel.com>
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Tested-by: James Hutchinson <jahutchinson99@googlemail.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: soc-dapm: fix two incorrect uses of list iterator

commit f730a46b931d894816af34a0ff8e4ad51565b39f upstream.

These two bug are here:
list_for_each_entry_safe_continue(w, n, list,
power_list);
list_for_each_entry_safe_continue(w, n, list,
power_list);

After the list_for_each_entry_safe_continue() exits, the list iterator
will always be a bogus pointer which point to an invalid struct objdect
containing HEAD member. The funciton poniter 'w->event' will be a
invalid value which can lead to a control-flow hijack if the 'w' can be
controlled.

The original intention was to continue the outer list_for_each_entry_safe()
loop with the same entry if w->event is NULL, but misunderstanding the
meaning of list_for_each_entry_safe_continue().

So just add a 'continue;' to fix the bug.

Cc: stable@vger.kernel.org
Fixes: 163cac061c973 ("ASoC: Factor out DAPM sequence execution")
Signed-off-by: Xiaomeng Tong <xiam0nd.tong@gmail.com>
Link: https://lore.kernel.org/r/20220329012134.9375-1-xiam0nd.tong@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

openvswitch: fix OOB access in reserve_sfa_size()

commit cefa91b2332d7009bc0be5d951d6cbbf349f90f8 upstream.

Given a sufficiently large number of actions, while copying and
reserving memory for a new action of a new flow, if next_offset is
greater than MAX_ACTIONS_BUFSIZE, the function reserve_sfa_size() does
not return -EMSGSIZE as expected, but it allocates MAX_ACTIONS_BUFSIZE
bytes increasing actions_len by req_size. This can then lead to an OOB
write access, especially when further actions need to be copied.

Fix it by rearranging the flow action size check.

KASAN splat below:

==================================================================
BUG: KASAN: slab-out-of-bounds in reserve_sfa_size+0x1ba/0x380 [openvswitch]
Write of size 65360 at addr ffff888147e4001c by task handler15/836

CPU: 1 PID: 836 Comm: handler15 Not tainted 5.18.0-rc1+ #27
...
Call Trace:
 <TASK>
 dump_stack_lvl+0x45/0x5a
 print_report.cold+0x5e/0x5db
 ? __lock_text_start+0x8/0x8
 ? reserve_sfa_size+0x1ba/0x380 [openvswitch]
 kasan_report+0xb5/0x130
 ? reserve_sfa_size+0x1ba/0x380 [openvswitch]
 kasan_check_range+0xf5/0x1d0
 memcpy+0x39/0x60
 reserve_sfa_size+0x1ba/0x380 [openvswitch]
 __add_action+0x24/0x120 [openvswitch]
 ovs_nla_add_action+0xe/0x20 [openvswitch]
 ovs_ct_copy_action+0x29d/0x1130 [openvswitch]
 ? __kernel_text_address+0xe/0x30
 ? unwind_get_return_address+0x56/0xa0
 ? create_prof_cpu_mask+0x20/0x20
 ? ovs_ct_verify+0xf0/0xf0 [openvswitch]
 ? prep_compound_page+0x198/0x2a0
 ? __kasan_check_byte+0x10/0x40
 ? kasan_unpoison+0x40/0x70
 ? ksize+0x44/0x60
 ? reserve_sfa_size+0x75/0x380 [openvswitch]
 __ovs_nla_copy_actions+0xc26/0x2070 [openvswitch]
 ? __zone_watermark_ok+0x420/0x420
 ? validate_set.constprop.0+0xc90/0xc90 [openvswitch]
 ? __alloc_pages+0x1a9/0x3e0
 ? __alloc_pages_slowpath.constprop.0+0x1da0/0x1da0
 ? unwind_next_frame+0x991/0x1e40
 ? __mod_node_page_state+0x99/0x120
 ? __mod_lruvec_page_state+0x2e3/0x470
 ? __kasan_kmalloc_large+0x90/0xe0
 ovs_nla_copy_actions+0x1b4/0x2c0 [openvswitch]
 ovs_flow_cmd_new+0x3cd/0xb10 [openvswitch]
 ...

Cc: stable@vger.kernel.org
Fixes: f28cd2af22a0 ("openvswitch: fix flow actions reallocation")
Signed-off-by: Paolo Valerio <pvalerio@redhat.com>
Acked-by: Eelco Chaudron <echaudro@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xtensa: fix a7 clobbering in coprocessor context load/store

commit 839769c35477d4acc2369e45000ca7b0b6af39a7 upstream.

Fast coprocessor exception handler saves a3..a6, but coprocessor context
load/store code uses a4..a7 as temporaries, potentially clobbering a7.
'Potentially' because coprocessor state load/store macros may not use
all four temporary registers (and neither FPU nor HiFi macros do).
Use a3..a6 as intended.

Cc: stable@vger.kernel.org
Fixes: c658eac628aa ("[XTENSA] Add support for configurable registers and coprocessors")
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xtensa: patch_text: Fixup last cpu should be master

commit ee69d4be8fd064cd08270b4808d2dfece3614ee0 upstream.

These patch_text implementations are using stop_machine_cpuslocked
infrastructure with atomic cpu_count. The original idea: When the
master CPU patch_text, the others should wait for it. But current
implementation is using the first CPU as master, which couldn't
guarantee the remaining CPUs are waiting. This patch changes the
last CPU as the master to solve the potential risk.

Fixes: 64711f9a47d4 ("xtensa: implement jump_label support")
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Signed-off-by: Guo Ren <guoren@kernel.org>
Reviewed-by: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: <stable@vger.kernel.org>
Message-Id: <20220407073323.743224-4-guoren@kernel.org>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/perf: Fix power9 event alternatives

[ Upstream commit 0dcad700bb2776e3886fe0a645a4bf13b1e747cd ]

When scheduling a group of events, there are constraint checks done to
make sure all events can go in a group. Example, one of the criteria is
that events in a group cannot use the same PMC. But platform specific
PMU supports alternative event for some of the event codes. During
perf_event_open(), if any event group doesn't match constraint check
criteria, further lookup is done to find alternative event.

By current design, the array of alternatives events in PMU code is
expected to be sorted by column 0. This is because in
find_alternative() the return criteria is based on event code
comparison. ie. "event < ev_alt[i][0])". This optimisation is there
since find_alternative() can be called multiple times. In power9 PMU
code, the alternative event array is not sorted properly and hence there
is breakage in finding alternative events.

To work with existing logic, fix the alternative event array to be
sorted by column 0 for power9-pmu.c

Results:

With alternative events, multiplexing can be avoided. That is, for
example, in power9 PM_LD_MISS_L1 (0x3e054) has alternative event,
PM_LD_MISS_L1_ALT (0x400f0). This is an identical event which can be
programmed in a different PMC.

Before:

 # perf stat -e r3e054,r300fc

 Performance counter stats for 'system wide':

           1057860      r3e054              (50.21%)
               379      r300fc              (49.79%)

       0.944329741 seconds time elapsed

Since both the events are using PMC3 in this case, they are
multiplexed here.

After:

 # perf stat -e r3e054,r300fc

 Performance counter stats for 'system wide':

           1006948      r3e054
               182      r300fc

Fixes: 91e0bd1e6251 ("powerpc/perf: Add PM_LD_MISS_L1 and PM_BR_2PATH to power9 event list")
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Reviewed-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220419114828.89843-1-atrajeev@linux.vnet.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/vc4: Use pm_runtime_resume_and_get to fix pm_runtime_get_sync() usage

[ Upstream commit 3d0b93d92a2790337aa9d18cb332d02356a24126 ]

If the device is already in a runtime PM enabled state
pm_runtime_get_sync() will return 1.

Also, we need to call pm_runtime_put_noidle() when pm_runtime_get_sync()
fails, so use pm_runtime_resume_and_get() instead. this function
will handle this.

Fixes: 4078f5757144 ("drm/vc4: Add DSI driver")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220420135008.2757-1-linmq006@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

KVM: PPC: Fix TCE handling for VFIO

[ Upstream commit 26a62b750a4e6364b0393562f66759b1494c3a01 ]

The LoPAPR spec defines a guest visible IOMMU with a variable page size.
Currently QEMU advertises 4K, 64K, 2M, 16MB pages, a Linux VM picks
the biggest (16MB). In the case of a passed though PCI device, there is
a hardware IOMMU which does not support all pages sizes from the above -
P8 cannot do 2MB and P9 cannot do 16MB. So for each emulated
16M IOMMU page we may create several smaller mappings ("TCEs") in
the hardware IOMMU.

The code wrongly uses the emulated TCE index instead of hardware TCE
index in error handling. The problem is easier to see on POWER8 with
multi-level TCE tables (when only the first level is preallocated)
as hash mode uses real mode TCE hypercalls handlers.
The kernel starts using indirect tables when VMs get bigger than 128GB
(depends on the max page order).
The very first real mode hcall is going to fail with H_TOO_HARD as
in the real mode we cannot allocate memory for TCEs (we can in the virtual
mode) but on the way out the code attempts to clear hardware TCEs using
emulated TCE indexes which corrupts random kernel memory because
it_offset==1<<59 is subtracted from those indexes and the resulting index
is out of the TCE table bounds.

This fixes kvmppc_clear_tce() to use the correct TCE indexes.

While at it, this fixes TCE cache invalidation which uses emulated TCE
indexes instead of the hardware ones. This went unnoticed as 64bit DMA
is used these days and VMs map all RAM in one go and only then do DMA
and this is when the TCE cache gets populated.

Potentially this could slow down mapping, however normally 16MB
emulated pages are backed by 64K hardware pages so it is one write to
the "TCE Kill" per 256 updates which is not that bad considering the size
of the cache (1024 TCEs or so).

Fixes: ca1fc489cfa0 ("KVM: PPC: Book3S: Allow backing bigger guest IOMMU pages with smaller physical pages")
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Tested-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Frederic Barrat <fbarrat@linux.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220420050840.328223-1-aik@ozlabs.ru
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/panel/raspberrypi-touchscreen: Initialise the bridge in prepare

[ Upstream commit 5f18c0782b99e26121efa93d20b76c19e17aa1dd ]

The panel has a prepare call which is before video starts, and an
enable call which is after.
The Toshiba bridge should be configured before video, so move
the relevant power and initialisation calls to prepare.

Fixes: 2f733d6194bd ("drm/panel: Add support for the Raspberry Pi 7" Touchscreen.")
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220415162513.42190-3-stefan.wahren@i2se.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/panel/raspberrypi-touchscreen: Avoid NULL deref if not initialised

[ Upstream commit f92055ae0acb035891e988ce345d6b81a0316423 ]

If a call to rpi_touchscreen_i2c_write from rpi_touchscreen_probe
fails before mipi_dsi_device_register_full is called, then
in trying to log the error message if uses ts->dsi->dev when
it is still NULL.

Use ts->i2c->dev instead, which is initialised earlier in probe.

Fixes: 2f733d6194bd ("drm/panel: Add support for the Raspberry Pi 7" Touchscreen.")
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220415162513.42190-2-stefan.wahren@i2se.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

dma: at_xdmac: fix a missing check on list iterator

commit 206680c4e46b62fd8909385e0874a36952595b85 upstream.

The bug is here:
__func__, desc, &desc->tx_dma_desc.phys, ret, cookie, residue);

The list iterator 'desc' will point to a bogus position containing
HEAD if the list is empty or no element is found. To avoid dev_dbg()
prints a invalid address, use a new variable 'iter' as the list
iterator, while use the origin variable 'desc' as a dedicated
pointer to point to the found element.

Cc: stable@vger.kernel.org
Fixes: 82e2424635f4c ("dmaengine: xdmac: fix print warning on dma_addr_t variable")
Signed-off-by: Xiaomeng Tong <xiam0nd.tong@gmail.com>
Link: https://lore.kernel.org/r/20220327061154.4867-1-xiam0nd.tong@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ata: pata_marvell: Check the 'bmdma_addr' beforing reading

commit aafa9f958342db36c17ac2a7f1b841032c96feb4 upstream.

Before detecting the cable type on the dma bar, the driver should check
whether the 'bmdma_addr' is zero, which means the adapter does not
support DMA, otherwise we will get the following error:

[    5.146634] Bad IO access at port 0x1 (return inb(port))
[    5.147206] WARNING: CPU: 2 PID: 303 at lib/iomap.c:44 ioread8+0x4a/0x60
[    5.150856] RIP: 0010:ioread8+0x4a/0x60
[    5.160238] Call Trace:
[    5.160470]  <TASK>
[    5.160674]  marvell_cable_detect+0x6e/0xc0 [pata_marvell]
[    5.161728]  ata_eh_recover+0x3520/0x6cc0
[    5.168075]  ata_do_eh+0x49/0x3c0

Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

oom_kill.c: futex: delay the OOM reaper to allow time for proper futex cleanup

commit e4a38402c36e42df28eb1a5394be87e6571fb48a upstream.

The pthread struct is allocated on PRIVATE|ANONYMOUS memory [1] which
can be targeted by the oom reaper.  This mapping is used to store the
futex robust list head; the kernel does not keep a copy of the robust
list and instead references a userspace address to maintain the
robustness during a process death.

A race can occur between exit_mm and the oom reaper that allows the oom
reaper to free the memory of the futex robust list before the exit path
has handled the futex death:

    CPU1                               CPU2
    --------------------------------------------------------------------
    page_fault
    do_exit "signal"
    wake_oom_reaper
                                        oom_reaper
                                        oom_reap_task_mm (invalidates mm)
    exit_mm
    exit_mm_release
    futex_exit_release
    futex_cleanup
    exit_robust_list
    get_user (EFAULT- can't access memory)

If the get_user EFAULT's, the kernel will be unable to recover the
waiters on the robust_list, leaving userspace mutexes hung indefinitely.

Delay the OOM reaper, allowing more time for the exit path to perform
the futex cleanup.

Reproducer: https://gitlab.com/jsavitz/oom_futex_reproducer

Based on a patch by Michal Hocko.

Link: https://elixir.bootlin.com/glibc/glibc-2.35/source/nptl/allocatestack.c#L370
Link: https://lkml.kernel.org/r/20220414144042.677008-1-npache@redhat.com
Fixes: 212925802454 ("mm: oom: let oom_reap_task and exit_mmap run concurrently")
Signed-off-by: Joel Savitz <jsavitz@redhat.com>
Signed-off-by: Nico Pache <npache@redhat.com>
Co-developed-by: Joel Savitz <jsavitz@redhat.com>
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Rafael Aquini <aquini@redhat.com>
Cc: Waiman Long <longman@redhat.com>
Cc: Herton R. Krzesinski <herton@redhat.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Ben Segall <bsegall@google.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Daniel Bristot de Oliveira <bristot@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Joel Savitz <jsavitz@redhat.com>
Cc: Darren Hart <dvhart@infradead.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

EDAC/synopsys: Read the error count from the correct register

commit e2932d1f6f055b2af2114c7e64a26dc1b5593d0c upstream.

Currently, the error count is read wrongly from the status register. Read
the count from the proper error count register (ERRCNT).

  [ bp: Massage. ]

Fixes: b500b4a029d5 ("EDAC, synopsys: Add ECC support for ZynqMP DDR controller")
Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220414102813.4468-1-shubhrajyoti.datta@xilinx.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

stat: fix inconsistency between struct stat and struct compat_stat

[ Upstream commit 932aba1e169090357a77af18850a10c256b50819 ]

struct stat (defined in arch/x86/include/uapi/asm/stat.h) has 32-bit
st_dev and st_rdev; struct compat_stat (defined in
arch/x86/include/asm/compat.h) has 16-bit st_dev and st_rdev followed by
a 16-bit padding.

This patch fixes struct compat_stat to match struct stat.

[ Historical note: the old x86 'struct stat' did have that 16-bit field
  that the compat layer had kept around, but it was changes back in 2003
  by "struct stat - support larger dev_t":

    https://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git/commit/?id=e95b2065677fe32512a597a79db94b77b90c968d

  and back in those days, the x86_64 port was still new, and separate
  from the i386 code, and had already picked up the old version with a
  16-bit st_dev field ]

Note that we can't change compat_dev_t because it is used by
compat_loop_info.

Also, if the st_dev and st_rdev values are 32-bit, we don't have to use
old_valid_dev to test if the value fits into them.  This fixes
-EOVERFLOW on filesystems that are on NVMe because NVMe uses the major
number 259.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: Andreas Schwab <schwab@linux-m68k.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: qedi: Fix failed disconnect handling

[ Upstream commit 857b06527f707f5df634b854898a191b5c1d0272 ]

We set the qedi_ep state to EP_STATE_OFLDCONN_START when the ep is
created. Then in qedi_set_path we kick off the offload work. If userspace
times out the connection and calls ep_disconnect, qedi will only flush the
offload work if the qedi_ep state has transitioned away from
EP_STATE_OFLDCONN_START. If we can't connect we will not have transitioned
state and will leave the offload work running, and we will free the qedi_ep
from under it.

This patch just has us init the work when we create the ep, then always
flush it.

Link: https://lore.kernel.org/r/20220408001314.5014-10-michael.christie@oracle.com
Tested-by: Manish Rangankar <mrangankar@marvell.com>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Reviewed-by: Chris Leech <cleech@redhat.com>
Acked-by: Manish Rangankar <mrangankar@marvell.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: macb: Restart tx only if queue pointer is lagging

[ Upstream commit 5ad7f18cd82cee8e773d40cc7a1465a526f2615c ]

commit 4298388574da ("net: macb: restart tx after tx used bit read")
added support for restarting transmission. Restarting tx does not work
in case controller asserts TXUBR interrupt and TQBP is already at the end
of the tx queue. In that situation, restarting tx will immediately cause
assertion of another TXUBR interrupt. The driver will end up in an infinite
interrupt loop which it cannot break out of.

For cases where TQBP is at the end of the tx queue, instead
only clear TX_USED interrupt. As more data gets pushed to the queue,
transmission will resume.

This issue was observed on a Xilinx Zynq-7000 based board.
During stress test of the network interface,
driver would get stuck on interrupt loop within seconds or minutes
causing CPU to stall.

Signed-off-by: Tomas Melin <tomas.melin@vaisala.com>
Tested-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20220407161659.14532-1-tomas.melin@vaisala.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm/mdp5: check the return of kzalloc()

[ Upstream commit 047ae665577776b7feb11bd4f81f46627cff95e7 ]

kzalloc() is a memory allocation function which can return NULL when
some internal memory errors happen. So it is better to check it to
prevent potential wrong memory access.

Besides, since mdp5_plane_reset() is void type, so we should better
set `plane-state` to NULL after releasing it.

Signed-off-by: Xiaoke Wang <xkernel.wang@foxmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/481055/
Link: https://lore.kernel.org/r/tencent_8E2A1C78140EE1784AB2FF4B2088CC0AB908@qq.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dpaa_eth: Fix missing of_node_put in dpaa_get_ts_info()

[ Upstream commit 1a7eb80d170c28be2928433702256fe2a0bd1e0f ]

Both of of_get_parent() and of_parse_phandle() return node pointer with
refcount incremented, use of_node_put() on it to decrease refcount
when done.

Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Lv Ruyi <lv.ruyi@zte.com.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

brcmfmac: sdio: Fix undefined behavior due to shift overflowing the constant

[ Upstream commit 6fb3a5868b2117611f41e421e10e6a8c2a13039a ]

Fix:

  drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c: In function ‘brcmf_sdio_drivestrengthinit’:
  drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c:3798:2: error: case label does not reduce to an integer constant
    case SDIOD_DRVSTR_KEY(BRCM_CC_43143_CHIP_ID, 17):
    ^~~~
  drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c:3809:2: error: case label does not reduce to an integer constant
    case SDIOD_DRVSTR_KEY(BRCM_CC_43362_CHIP_ID, 13):
    ^~~~

See https://lore.kernel.org/r/YkwQ6%2BtIH8GQpuct@zn.tnic for the gory
details as to why it triggers with older gccs only.

Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Arend van Spriel <aspriel@gmail.com>
Cc: Franky Lin <franky.lin@broadcom.com>
Cc: Hante Meuleman <hante.meuleman@broadcom.com>
Cc: Kalle Valo <kvalo@kernel.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: brcm80211-dev-list.pdl@broadcom.com
Cc: netdev@vger.kernel.org
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/Ykx0iRlvtBnKqtbG@zn.tnic
Signed-off-by: Sasha Levin <sashal@kernel.org>

mt76: Fix undefined behavior due to shift overflowing the constant

[ Upstream commit dbc2b1764734857d68425468ffa8486e97ab89df ]

Fix:

  drivers/net/wireless/mediatek/mt76/mt76x2/pci.c: In function ‘mt76x2e_probe’:
  ././include/linux/compiler_types.h:352:38: error: call to ‘__compiletime_assert_946’ \
declared with attribute error: FIELD_PREP: mask is not constant
    _compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)

See https://lore.kernel.org/r/YkwQ6%2BtIH8GQpuct@zn.tnic for the gory
details as to why it triggers with older gccs only.

Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Felix Fietkau <nbd@nbd.name>
Cc: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com>
Cc: Ryder Lee <ryder.lee@mediatek.com>
Cc: Shayne Chen <shayne.chen@mediatek.com>
Cc: Sean Wang <sean.wang@mediatek.com>
Cc: Kalle Valo <kvalo@kernel.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220405151517.29753-9-bp@alien8.de
Signed-off-by: Sasha Levin <sashal@kernel.org>

cifs: Check the IOCB_DIRECT flag, not O_DIRECT

[ Upstream commit 994fd530a512597ffcd713b0f6d5bc916c5698f0 ]

Use the IOCB_DIRECT indicator flag on the I/O context rather than checking to
see if the file was opened O_DIRECT.

Signed-off-by: David Howells <dhowells@redhat.com>
cc: Steve French <sfrench@samba.org>
cc: Shyam Prasad N <nspmangalore@gmail.com>
cc: Rohith Surabattula <rohiths.msft@gmail.com>
cc: linux-cifs@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

vxlan: fix error return code in vxlan_fdb_append

[ Upstream commit 7cea5560bf656b84f9ed01c0cc829d4eecd0640b ]

When kmalloc and dst_cache_init failed,
should return ENOMEM rather than ENOBUFS.

Signed-off-by: Hongbin Wang <wh_bin@126.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: usb-audio: Fix undefined behavior due to shift overflowing the constant

[ Upstream commit 1ef8715975de8bd481abbd0839ed4f49d9e5b0ff ]

Fix:

  sound/usb/midi.c: In function ‘snd_usbmidi_out_endpoint_create’:
  sound/usb/midi.c:1389:2: error: case label does not reduce to an integer constant
    case USB_ID(0xfc08, 0x0101): /* Unknown vendor Cable */
    ^~~~

See https://lore.kernel.org/r/YkwQ6%2BtIH8GQpuct@zn.tnic for the gory
details as to why it triggers with older gccs only.

[ A slight correction with parentheses around the argument by tiwai ]

Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20220405151517.29753-3-bp@alien8.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

platform/x86: samsung-laptop: Fix an unsigned comparison which can never be negative

[ Upstream commit 0284d4d1be753f648f28b77bdfbe6a959212af5c ]

Eliminate the follow smatch warnings:

drivers/platform/x86/samsung-laptop.c:1124 kbd_led_set() warn: unsigned
'value' is never less than zero.

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Link: https://lore.kernel.org/r/20220322061830.105579-1-jiapeng.chong@linux.alibaba.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

reset: tegra-bpmp: Restore Handle errors in BPMP response

[ Upstream commit d1da1052ffad63aa5181b69f20a6952e31f339c2 ]

This reverts following commit 69125b4b9440 ("reset: tegra-bpmp: Revert
Handle errors in BPMP response").

The Tegra194 HDA reset failure is fixed by commit d278dc9151a0 ("ALSA:
hda/tegra: Fix Tegra194 HDA reset failure"). The temporary revert of
original commit c045ceb5a145 ("reset: tegra-bpmp: Handle errors in BPMP
response") can be removed now.

Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://lore.kernel.org/r/1641995806-15245-1-git-send-email-spujar@nvidia.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: vexpress/spc: Avoid negative array index when !SMP

[ Upstream commit b3f1dd52c991d79118f35e6d1bf4d7cb09882e38 ]

When building multi_v7_defconfig+CONFIG_SMP=n, -Warray-bounds exposes
a couple negative array index accesses:

arch/arm/mach-vexpress/spc.c: In function 've_spc_clk_init':
arch/arm/mach-vexpress/spc.c:583:21: warning: array subscript -1 is below array bounds of 'bool[2]' {aka '_Bool[2]'} [-Warray-bounds]
  583 |   if (init_opp_table[cluster])
      |       ~~~~~~~~~~~~~~^~~~~~~~~
arch/arm/mach-vexpress/spc.c:556:7: note: while referencing 'init_opp_table'
  556 |  bool init_opp_table[MAX_CLUSTERS] = { false };
      |       ^~~~~~~~~~~~~~
arch/arm/mach-vexpress/spc.c:592:18: warning: array subscript -1 is below array bounds of 'bool[2]' {aka '_Bool[2]'} [-Warray-bounds]
  592 |    init_opp_table[cluster] = true;
      |    ~~~~~~~~~~~~~~^~~~~~~~~
arch/arm/mach-vexpress/spc.c:556:7: note: while referencing 'init_opp_table'
  556 |  bool init_opp_table[MAX_CLUSTERS] = { false };
      |       ^~~~~~~~~~~~~~

Skip this logic when built !SMP.

Link: https://lore.kernel.org/r/20220331190443.851661-1-keescook@chromium.org
Cc: Liviu Dudau <liviu.dudau@arm.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: linux-arm-kernel@lists.infradead.org
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests: mlxsw: vxlan_flooding: Prevent flooding of unwanted packets

[ Upstream commit 044011fdf162c5dd61c02841930c8f438a9adadb ]

The test verifies that packets are correctly flooded by the bridge and
the VXLAN device by matching on the encapsulated packets at the other
end. However, if packets other than those generated by the test also
ingress the bridge (e.g., MLD packets), they will be flooded as well and
interfere with the expected count.

Make the test more robust by making sure that only the packets generated
by the test can ingress the bridge. Drop all the rest using tc filters
on the egress of 'br0' and 'h1'.

In the software data path, the problem can be solved by matching on the
inner destination MAC or dropping unwanted packets at the egress of the
VXLAN device, but this is not currently supported by mlxsw.

Fixes: 94d302deae25 ("selftests: mlxsw: Add a test for VxLAN flooding")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netlink: reset network and mac headers in netlink_dump()

[ Upstream commit 99c07327ae11e24886d552dddbe4537bfca2765d ]

netlink_dump() is allocating an skb, reserves space in it
but forgets to reset network header.

This allows a BPF program, invoked later from sk_filter()
to access uninitialized kernel memory from the reserved
space.

Theorically mac header reset could be omitted, because
it is set to a special initial value.
bpf_internal_load_pointer_neg_helper calls skb_mac_header()
without checking skb_mac_header_was_set().
Relying on skb->len not being too big seems fragile.
We also could add a sanity check in bpf_internal_load_pointer_neg_helper()
to avoid surprises in the future.

syzbot report was:

BUG: KMSAN: uninit-value in ___bpf_prog_run+0xa22b/0xb420 kernel/bpf/core.c:1637
 ___bpf_prog_run+0xa22b/0xb420 kernel/bpf/core.c:1637
 __bpf_prog_run32+0x121/0x180 kernel/bpf/core.c:1796
 bpf_dispatcher_nop_func include/linux/bpf.h:784 [inline]
 __bpf_prog_run include/linux/filter.h:626 [inline]
 bpf_prog_run include/linux/filter.h:633 [inline]
 __bpf_prog_run_save_cb+0x168/0x580 include/linux/filter.h:756
 bpf_prog_run_save_cb include/linux/filter.h:770 [inline]
 sk_filter_trim_cap+0x3bc/0x8c0 net/core/filter.c:150
 sk_filter include/linux/filter.h:905 [inline]
 netlink_dump+0xe0c/0x16c0 net/netlink/af_netlink.c:2276
 netlink_recvmsg+0x1129/0x1c80 net/netlink/af_netlink.c:2002
 sock_recvmsg_nosec net/socket.c:948 [inline]
 sock_recvmsg net/socket.c:966 [inline]
 sock_read_iter+0x5a9/0x630 net/socket.c:1039
 do_iter_readv_writev+0xa7f/0xc70
 do_iter_read+0x52c/0x14c0 fs/read_write.c:786
 vfs_readv fs/read_write.c:906 [inline]
 do_readv+0x432/0x800 fs/read_write.c:943
 __do_sys_readv fs/read_write.c:1034 [inline]
 __se_sys_readv fs/read_write.c:1031 [inline]
 __x64_sys_readv+0xe5/0x120 fs/read_write.c:1031
 do_syscall_x64 arch/x86/entry/common.c:51 [inline]
 do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:81
 entry_SYSCALL_64_after_hwframe+0x44/0xae

Uninit was stored to memory at:
 ___bpf_prog_run+0x96c/0xb420 kernel/bpf/core.c:1558
 __bpf_prog_run32+0x121/0x180 kernel/bpf/core.c:1796
 bpf_dispatcher_nop_func include/linux/bpf.h:784 [inline]
 __bpf_prog_run include/linux/filter.h:626 [inline]
 bpf_prog_run include/linux/filter.h:633 [inline]
 __bpf_prog_run_save_cb+0x168/0x580 include/linux/filter.h:756
 bpf_prog_run_save_cb include/linux/filter.h:770 [inline]
 sk_filter_trim_cap+0x3bc/0x8c0 net/core/filter.c:150
 sk_filter include/linux/filter.h:905 [inline]
 netlink_dump+0xe0c/0x16c0 net/netlink/af_netlink.c:2276
 netlink_recvmsg+0x1129/0x1c80 net/netlink/af_netlink.c:2002
 sock_recvmsg_nosec net/socket.c:948 [inline]
 sock_recvmsg net/socket.c:966 [inline]
 sock_read_iter+0x5a9/0x630 net/socket.c:1039
 do_iter_readv_writev+0xa7f/0xc70
 do_iter_read+0x52c/0x14c0 fs/read_write.c:786
 vfs_readv fs/read_write.c:906 [inline]
 do_readv+0x432/0x800 fs/read_write.c:943
 __do_sys_readv fs/read_write.c:1034 [inline]
 __se_sys_readv fs/read_write.c:1031 [inline]
 __x64_sys_readv+0xe5/0x120 fs/read_write.c:1031
 do_syscall_x64 arch/x86/entry/common.c:51 [inline]
 do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:81
 entry_SYSCALL_64_after_hwframe+0x44/0xae

Uninit was created at:
 slab_post_alloc_hook mm/slab.h:737 [inline]
 slab_alloc_node mm/slub.c:3244 [inline]
 __kmalloc_node_track_caller+0xde3/0x14f0 mm/slub.c:4972
 kmalloc_reserve net/core/skbuff.c:354 [inline]
 __alloc_skb+0x545/0xf90 net/core/skbuff.c:426
 alloc_skb include/linux/skbuff.h:1158 [inline]
 netlink_dump+0x30f/0x16c0 net/netlink/af_netlink.c:2242
 netlink_recvmsg+0x1129/0x1c80 net/netlink/af_netlink.c:2002
 sock_recvmsg_nosec net/socket.c:948 [inline]
 sock_recvmsg net/socket.c:966 [inline]
 sock_read_iter+0x5a9/0x630 net/socket.c:1039
 do_iter_readv_writev+0xa7f/0xc70
 do_iter_read+0x52c/0x14c0 fs/read_write.c:786
 vfs_readv fs/read_write.c:906 [inline]
 do_readv+0x432/0x800 fs/read_write.c:943
 __do_sys_readv fs/read_write.c:1034 [inline]
 __se_sys_readv fs/read_write.c:1031 [inline]
 __x64_sys_readv+0xe5/0x120 fs/read_write.c:1031
 do_syscall_x64 arch/x86/entry/common.c:51 [inline]
 do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:81
 entry_SYSCALL_64_after_hwframe+0x44/0xae

CPU: 0 PID: 3470 Comm: syz-executor751 Not tainted 5.17.0-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011

Fixes: db65a3aaf29e ("netlink: Trim skb to alloc size to avoid MSG_TRUNC")
Fixes: 9063e21fb026 ("netlink: autosize skb lengthes")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Link: https://lore.kernel.org/r/20220415181442.551228-1-eric.dumazet@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

l3mdev: l3mdev_master_upper_ifindex_by_index_rcu should be using netdev_master_upper_dev_get_rcu

[ Upstream commit 83daab06252ee5d0e1f4373ff28b79304945fc19 ]

Next patch uses l3mdev_master_upper_ifindex_by_index_rcu which throws
a splat with debug kernels:

[13783.087570] ------------[ cut here ]------------
[13783.093974] RTNL: assertion failed at net/core/dev.c (6702)
[13783.100761] WARNING: CPU: 3 PID: 51132 at net/core/dev.c:6702 netdev_master_upper_dev_get+0x16a/0x1a0

[13783.184226] CPU: 3 PID: 51132 Comm: kworker/3:3 Not tainted 5.17.0-custom-100090-g6f963aafb1cc #682
[13783.194788] Hardware name: Mellanox Technologies Ltd. MSN2010/SA002610, BIOS 5.6.5 08/24/2017
[13783.204755] Workqueue: mld mld_ifc_work [ipv6]
[13783.210338] RIP: 0010:netdev_master_upper_dev_get+0x16a/0x1a0
[13783.217209] Code: 0f 85 e3 fe ff ff e8 65 ac ec fe ba 2e 1a 00 00 48 c7 c6 60 6f 38 83 48 c7 c7 c0 70 38 83 c6 05 5e b5 d7 01 01 e8 c6 29 52 00 <0f> 0b e9 b8 fe ff ff e8 5a 6c 35 ff e9 1c ff ff ff 48 89 ef e8 7d
[13783.238659] RSP: 0018:ffffc9000b37f5a8 EFLAGS: 00010286
[13783.244995] RAX: 0000000000000000 RBX: ffff88812ee5c000 RCX: 0000000000000000
[13783.253379] RDX: ffff88811ce09d40 RSI: ffffffff812d0fcd RDI: fffff5200166fea7
[13783.261769] RBP: 0000000000000000 R08: 0000000000000001 R09: ffff8882375f4287
[13783.270138] R10: ffffed1046ebe850 R11: 0000000000000001 R12: dffffc0000000000
[13783.278510] R13: 0000000000000275 R14: ffffc9000b37f688 R15: ffff8881273b4af8
[13783.286870] FS:  0000000000000000(0000) GS:ffff888237400000(0000) knlGS:0000000000000000
[13783.296352] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[13783.303177] CR2: 00007ff25fc9b2e8 CR3: 0000000174d23000 CR4: 00000000001006e0
[13783.311546] Call Trace:
[13783.314660]  <TASK>
[13783.317553]  l3mdev_master_upper_ifindex_by_index_rcu+0x43/0xe0
...

Change l3mdev_master_upper_ifindex_by_index_rcu to use
netdev_master_upper_dev_get_rcu.

Fixes: 6a6d6681ac1a ("l3mdev: add function to retreive upper master")
Signed-off-by: Ido Schimmel <idosch@idosch.org>
Signed-off-by: David Ahern <dsahern@kernel.org>
Cc: Alexis Bauvin <abauvin@scaleway.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/sched: cls_u32: fix possible leak in u32_init_knode()

[ Upstream commit ec5b0f605b105457f257f2870acad4a5d463984b ]

While investigating a related syzbot report,
I found that whenever call to tcf_exts_init()
from u32_init_knode() is failing, we end up
with an elevated refcount on ht->refcnt

To avoid that, only increase the refcount after
all possible errors have been evaluated.

Fixes: b9a24bb76bf6 ("net_sched: properly handle failure case of tcf_exts_init()")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/packet: fix packet_sock xmit return value checking

[ Upstream commit 29e8e659f984be00d75ec5fef4e37c88def72712 ]

packet_sock xmit could be dev_queue_xmit, which also returns negative
errors. So only checking positive errors is not enough, or userspace
sendmsg may return success while packet is not send out.

Move the net_xmit_errno() assignment in the braces as checkpatch.pl said
do not use assignment in if condition.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: Flavio Leitner <fbl@redhat.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/smc: Fix sock leak when release after smc_shutdown()

[ Upstream commit 1a74e99323746353bba11562a2f2d0aa8102f402 ]

Since commit e5d5aadcf3cd ("net/smc: fix sk_refcnt underflow on linkdown
and fallback"), for a fallback connection, __smc_release() does not call
sock_put() if its state is already SMC_CLOSED.

When calling smc_shutdown() after falling back, its state is set to
SMC_CLOSED but does not call sock_put(), so this patch calls it.

Reported-and-tested-by: syzbot+6e29a053eb165bd50de5@syzkaller.appspotmail.com
Fixes: e5d5aadcf3cd ("net/smc: fix sk_refcnt underflow on linkdown and fallback")
Signed-off-by: Tony Lu <tonylu@linux.alibaba.com>
Acked-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

rxrpc: Restore removed timer deletion

[ Upstream commit ee3b0826b4764f6c13ad6db67495c5a1c38e9025 ]

A recent patch[1] from Eric Dumazet flipped the order in which the
keepalive timer and the keepalive worker were cancelled in order to fix a
syzbot reported issue[2].  Unfortunately, this enables the mirror image bug
whereby the timer races with rxrpc_exit_net(), restarting the worker after
it has been cancelled:

CPU 1 CPU 2
=============== =====================
if (rxnet->live)
<INTERRUPT>
rxnet->live = false;
  cancel_work_sync(&rxnet->peer_keepalive_work);
rxrpc_queue_work(&rxnet->peer_keepalive_work);
del_timer_sync(&rxnet->peer_keepalive_timer);

Fix this by restoring the removed del_timer_sync() so that we try to remove
the timer twice.  If the timer runs again, it should see ->live == false
and not restart the worker.

Fixes: 1946014ca3b1 ("rxrpc: fix a race in rxrpc_exit_net()")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Eric Dumazet <edumazet@google.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Link: https://lore.kernel.org/r/20220404183439.3537837-1-eric.dumazet@gmail.com/
Link: https://syzkaller.appspot.com/bug?extid=724378c4bb58f703b09a
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>