usb: renesas_usbhs: getting residue from callback_result

[ Upstream commit ea0efd687b01355cd799c8643d0c636ba4859ffc ]

This driver assumed that dmaengine_tx_status() could return
the residue even if the transfer was completed. However,
this was not correct usage [1] and this caused to break getting
the residue after the commit 24461d9792c2 ("dmaengine:
virt-dma: Fix access after free in vchan_complete()") actually.
So, this is possible to get wrong received size if the usb
controller gets a short packet. For example, g_zero driver
causes "bad OUT byte" errors.

The usb-dmac driver will support the callback_result, so this
driver can use it to get residue correctly. Note that even if
the usb-dmac driver has not supported the callback_result yet,
this patch doesn't cause any side-effects.

[1]
https://lore.kernel.org/dmaengine/20200616165550.GP2324254@vkoul-mobl/

Reported-by: Hien Dang <hien.dang.eb@renesas.com>
Fixes: 24461d9792c2 ("dmaengine: virt-dma: Fix access after free in vchan_complete()")
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/1592482277-19563-1-git-send-email-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: gadget: udc: Potential Oops in error handling code

[ Upstream commit e55f3c37cb8d31c7e301f46396b2ac6a19eb3a7c ]

If this is in "transceiver" mode the the ->qwork isn't required and is
a NULL pointer.  This can lead to a NULL dereference when we call
destroy_workqueue(udc->qwork).

Fixes: 3517c31a8ece ("usb: gadget: mv_udc: use devm_xxx for probe")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: lpfc: Avoid another null dereference in lpfc_sli4_hba_unset()

[ Upstream commit 46da547e21d6cefceec3fb3dba5ebbca056627fc ]

Commit cdb42becdd40 ("scsi: lpfc: Replace io_channels for nvme and fcp with
general hdw_queues per cpu") has introduced static checker warnings for
potential null dereferences in 'lpfc_sli4_hba_unset()' and commit 1ffdd2c0440d
("scsi: lpfc: resolve static checker warning in lpfc_sli4_hba_unset") has
tried to fix it.  However, yet another potential null dereference is
remaining.  This commit fixes it.

This bug was discovered and resolved using Coverity Static Analysis
Security Testing (SAST) by Synopsys, Inc.

Link: https://lore.kernel.org/r/20200623084122.30633-1-sjpark@amazon.com
Fixes: 1ffdd2c0440d ("scsi: lpfc: resolve static checker warning inlpfc_sli4_hba_unset")
Fixes: cdb42becdd40 ("scsi: lpfc: Replace io_channels for nvme and fcp with general hdw_queues per cpu")
Reviewed-by: James Smart <james.smart@broadcom.com>
Signed-off-by: SeongJae Park <sjpark@amazon.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: imx5: add missing put_device() call in imx_suspend_alloc_ocram()

[ Upstream commit 586745f1598ccf71b0a5a6df2222dee0a865954e ]

if of_find_device_by_node() succeed, imx_suspend_alloc_ocram() doesn't
have a corresponding put_device(). Thus add a jump target to fix the
exception handling for this function implementation.

Fixes: 1579c7b9fe01 ("ARM: imx53: Set DDR pins to high impedance when in suspend to RAM.")
Signed-off-by: yu kuai <yukuai3@huawei.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cxgb4: move PTP lock and unlock to caller in Tx path

[ Upstream commit 030c98824deaba205787af501a074b3d7f46e32e ]

Check for whether PTP is enabled or not at the caller and perform
locking/unlocking at the caller.

Fixes following sparse warning:
sge.c:1641:26: warning: context imbalance in 'cxgb4_eth_xmit' -
different lock contexts for basic block

Fixes: a456950445a0 ("cxgb4: time stamping interface for PTP")
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cxgb4: move handling L2T ARP failures to caller

[ Upstream commit 11d8cd5c9f3b46f397f889cefdb66795518aaebd ]

Move code handling L2T ARP failures to the only caller.

Fixes following sparse warning:
skbuff.h:2091:29: warning: context imbalance in
'handle_failed_resolution' - unexpected unlock

Fixes: 749cb5fe48bb ("cxgb4: Replace arpq_head/arpq_tail with SKB double link-list code")
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: qed: reset ILT block sizes before recomputing to fix crashes

[ Upstream commit c221dd1831732449f844e03631a34fd21c2b9429 ]

Sizes of all ILT blocks must be reset before ILT recomputing when
disabling clients, or memory allocation may exceed ILT shadow array
and provoke system crashes.

Fixes: 1408cc1fa48c ("qed: Introduce VFs")
Signed-off-by: Alexander Lobakin <alobakin@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: qede: fix use-after-free on recovery and AER handling

[ Upstream commit ec6c80590bde6b5dfa4970fffa3572f1acd313ca ]

Set edev->cdev pointer to NULL after calling remove() callback to avoid
using of already freed object.

Fixes: ccc67ef50b90 ("qede: Error recovery process")
Signed-off-by: Alexander Lobakin <alobakin@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: qede: fix PTP initialization on recovery

[ Upstream commit 1c85f394c2206ea3835f43534d5675f0574e1b70 ]

Currently PTP cyclecounter and timecounter are initialized only on
the first probing and are cleaned up during removal. This means that
PTP becomes non-functional after device recovery.
Fix this by unconditional PTP initialization on probing and clearing
Tx pending bit on exiting.

Fixes: ccc67ef50b90 ("qede: Error recovery process")
Signed-off-by: Alexander Lobakin <alobakin@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: qed: fix excessive QM ILT lines consumption

[ Upstream commit d434d02f7e7c24c721365fd594ed781acb18e0da ]

This is likely a copy'n'paste mistake. The amount of ILT lines to
reserve for a single VF was being multiplied by the total VFs count.
This led to a huge redundancy in reservation and potential lines
drainouts.

Fixes: 1408cc1fa48c ("qed: Introduce VFs")
Signed-off-by: Alexander Lobakin <alobakin@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: qed: fix NVMe login fails over VFs

[ Upstream commit ccd7c7ce167a21dbf2b698ffcf00f11d96d44f9b ]

25ms sleep cycles in waiting for PF response are excessive and may lead
to different timeout failures.

Start to wait with short udelays, and in most cases polling will end
here. If the time was not sufficient, switch to msleeps.
usleep_range() may go far beyond 100us depending on platform and tick
configuration, hence atomic udelays for consistency.

Also add explicit DMA barriers since 'done' always comes from a shared
request-response DMA pool, and note that in the comment nearby.

Fixes: 1408cc1fa48c ("qed: Introduce VFs")
Signed-off-by: Alexander Lobakin <alobakin@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: qede: stop adding events on an already destroyed workqueue

[ Upstream commit 4079c7f7a2a00ab403c177ce723b560de59139c3 ]

Set rdma_wq pointer to NULL after destroying the workqueue and check
for it when adding new events to fix crashes on driver unload.

Fixes: cee9fbd8e2e9 ("qede: Add qedr framework")
Signed-off-by: Alexander Lobakin <alobakin@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: qed: fix async event callbacks unregistering

[ Upstream commit 31333c1a2521ff4b4ceb0c29de492549cd4a8de3 ]

qed_spq_unregister_async_cb() should be called before
qed_rdma_info_free() to avoid crash-spawning uses-after-free.
Instead of calling it from each subsystem exit code, do it in one place
on PF down.

Fixes: 291d57f67d24 ("qed: Fix rdma_info structure allocation")
Signed-off-by: Alexander Lobakin <alobakin@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: qed: fix left elements count calculation

[ Upstream commit 97dd1abd026ae4e6a82fa68645928404ad483409 ]

qed_chain_get_element_left{,_u32} returned 0 when the difference
between producer and consumer page count was equal to the total
page count.
Fix this by conditional expanding of producer value (vs
unconditional). This allowed to eliminate normalizaton against
total page count, which was the cause of this bug.

Misc: replace open-coded constants with common defines.

Fixes: a91eb52abb50 ("qed: Revisit chain implementation")
Signed-off-by: Alexander Lobakin <alobakin@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dma-direct: add missing set_memory_decrypted() for coherent mapping

[ Upstream commit 1a2b3357e860d890f8045367b179c7e7e802cd71 ]

When a coherent mapping is created in dma_direct_alloc_pages(), it needs
to be decrypted if the device requires unencrypted DMA before returning.

Fixes: 3acac065508f ("dma-mapping: merge the generic remapping helpers into dma-direct")
Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

soc: imx8m: Correct i.MX8MP UID fuse offset

[ Upstream commit c95c9693b112f312b59c5d100fd09a1349970fab ]

Correct i.MX8MP UID fuse offset according to fuse map:

UID_LOW: 0x420
UID_HIGH: 0x430

Fixes: fc40200ebf82 ("soc: imx: increase build coverage for imx8m soc driver")
Fixes: 18f662a73862 ("soc: imx: Add i.MX8MP SoC driver support")
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Reviewed-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iommu/vt-d: Update scalable mode paging structure coherency

[ Upstream commit 04c00956ee3cd138fd38560a91452a804a8c5550 ]

The Scalable-mode Page-walk Coherency (SMPWC) field in the VT-d extended
capability register indicates the hardware coherency behavior on paging
structures accessed through the pasid table entry. This is ignored in
current code and using ECAP.C instead which is only valid in legacy mode.
Fix this so that paging structure updates could be manually flushed from
the cache line if hardware page walking is not snooped.

Fixes: 765b6a98c1de3 ("iommu/vt-d: Enumerate the scalable mode capability")
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Kevin Tian <kevin.tian@intel.com>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Link: https://lore.kernel.org/r/20200622231345.29722-6-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iommu/vt-d: Enable PCI ACS for platform opt in hint

[ Upstream commit 50310600ebda74b9988467e2e6128711c7ba56fc ]

PCI ACS is disabled if Intel IOMMU is off by default or intel_iommu=off
is used in command line. Unfortunately, Intel IOMMU will be forced on if
there're devices sitting on an external facing PCI port that is marked
as untrusted (for example, thunderbolt peripherals). That means, PCI ACS
is disabled while Intel IOMMU is forced on to isolate those devices. As
the result, the devices of an MFD will be grouped by a single group even
the ACS is supported on device.

[    0.691263] pci 0000:00:07.1: Adding to iommu group 3
[    0.691277] pci 0000:00:07.2: Adding to iommu group 3
[    0.691292] pci 0000:00:07.3: Adding to iommu group 3

Fix it by requesting PCI ACS when Intel IOMMU is detected with platform
opt in hint.

Fixes: 89a6079df791a ("iommu/vt-d: Force IOMMU on for platform opt in hint")
Co-developed-by: Lalithambika Krishnakumar <lalithambika.krishnakumar@intel.com>
Signed-off-by: Lalithambika Krishnakumar <lalithambika.krishnakumar@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: Ashok Raj <ashok.raj@intel.com>
Link: https://lore.kernel.org/r/20200622231345.29722-5-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iommu/vt-d: Set U/S bit in first level page table by default

[ Upstream commit 16ecf10e815d70d11d2300243f4a3b4c7c5acac7 ]

When using first-level translation for IOVA, currently the U/S bit in the
page table is cleared which implies DMA requests with user privilege are
blocked. As the result, following error messages might be observed when
passing through a device to user level:

DMAR: DRHD: handling fault status reg 3
DMAR: [DMA Read] Request device [41:00.0] PASID 1 fault addr 7ecdcd000
        [fault reason 129] SM: U/S set 0 for first-level translation
        with user privilege

This fixes it by setting U/S bit in the first level page table and makes
IOVA over first level compatible with previous second-level translation.

Fixes: b802d070a52a1 ("iommu/vt-d: Use iova over first level")
Reported-by: Xin Zeng <xin.zeng@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20200622231345.29722-3-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Revert "KVM: VMX: Micro-optimize vmexit time when not exposing PMU"

[ Upstream commit 49097762fa405cdc16f8f597f6d27c078d4a31e9 ]

Guest crashes are observed on a Cascade Lake system when 'perf top' is
launched on the host, e.g.

 BUG: unable to handle kernel paging request at fffffe0000073038
 PGD 7ffa7067 P4D 7ffa7067 PUD 7ffa6067 PMD 7ffa5067 PTE ffffffffff120
 Oops: 0000 [#1] SMP PTI
 CPU: 1 PID: 1 Comm: systemd Not tainted 4.18.0+ #380
...
 Call Trace:
  serial8250_console_write+0xfe/0x1f0
  call_console_drivers.constprop.0+0x9d/0x120
  console_unlock+0x1ea/0x460

Call traces are different but the crash is imminent. The problem was
blindly bisected to the commit 041bc42ce2d0 ("KVM: VMX: Micro-optimize
vmexit time when not exposing PMU"). It was also confirmed that the
issue goes away if PMU is exposed to the guest.

With some instrumentation of the guest we can see what is being switched
(when we do atomic_switch_perf_msrs()):

 vmx_vcpu_run: switching 2 msrs
 vmx_vcpu_run: switching MSR38f guest: 70000000d host: 70000000f
 vmx_vcpu_run: switching MSR3f1 guest: 0 host: 2

The current guess is that PEBS (MSR_IA32_PEBS_ENABLE, 0x3f1) is to blame.
Regardless of whether PMU is exposed to the guest or not, PEBS needs to
be disabled upon switch.

This reverts commit 041bc42ce2d0efac3b85bbb81dea8c74b81f4ef9.

Reported-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20200619094046.654019-1-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ionic: tame the watchdog timer on reconfig

[ Upstream commit b59eabd23ee53e8c3492602722e1697f9a2f63ad ]

Even with moving netif_tx_disable() to an earlier point when
taking down the queues for a reconfiguration, we still end
up with the occasional netdev watchdog Tx Timeout complaint.
The old method of using netif_trans_update() works fine for
queue 0, but has no effect on the remaining queues.  Using
netif_device_detach() allows us to signal to the watchdog to
ignore us for the moment.

Fixes: beead698b173 ("ionic: Add the basic NDO callbacks for netdev support")
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Acked-by: Jonathan Toppins <jtoppins@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests/net: report etf errors correctly

[ Upstream commit ca8826095e4d4afc0ccaead27bba6e4b623a12ae ]

The ETF qdisc can queue skbs that it could not pace on the errqueue.

Address a few issues in the selftest

- recv buffer size was too small, and incorrectly calculated
- compared errno to ee_code instead of ee_errno
- missed invalid request error type

v2:
  - fix a few checkpatch --strict indentation warnings

Fixes: ea6a547669b3 ("selftests/net: make so_txtime more robust to timer variance")
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/mad: Fix possible memory leak in ib_mad_post_receive_mads()

[ Upstream commit a17f4bed811c60712d8131883cdba11a105d0161 ]

If ib_dma_mapping_error() returns non-zero value,
ib_mad_post_receive_mads() will jump out of loops and return -ENOMEM
without freeing mad_priv. Fix this memory-leak problem by freeing mad_priv
in this case.

Fixes: 2c34e68f4261 ("IB/mad: Check and handle potential DMA mapping errors")
Link: https://lore.kernel.org/r/20200612063824.180611-1-guofan5@huawei.com
Signed-off-by: Fan Guo <guofan5@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

s390/qeth: fix error handling for isolation mode cmds

[ Upstream commit e2dfcfba00ba4a414617ef4c5a8501fe21567eb3 ]

Current(?) OSA devices also store their cmd-specific return codes for
SET_ACCESS_CONTROL cmds into the top-level cmd->hdr.return_code.
So once we added stricter checking for the top-level field a while ago,
none of the error logic that rolls back the user's configuration to its
old state is applied any longer.

For this specific cmd, go back to the old model where we peek into the
cmd structure even though the top-level field indicated an error.

Fixes: 686c97ee29c8 ("s390/qeth: fix error handling in adapter command callbacks")
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: rockchip: Fix a reference count leak.

[ Upstream commit f141a422159a199f4c8dedb7e0df55b3b2cf16cd ]

Calling pm_runtime_get_sync increments the counter even in case of
failure, causing incorrect ref count if pm_runtime_put is not called in
error handling paths. Call pm_runtime_put if pm_runtime_get_sync fails.

Fixes: fc05a5b22253 ("ASoC: rockchip: add support for pdm controller")
Signed-off-by: Qiushi Wu <wu000273@umn.edu>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20200613205158.27296-1-wu000273@umn.edu
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/core: Check that type_attrs is not NULL prior access

[ Upstream commit 4121fb0db68ed4de574f9bdc630b75fcc99b4835 ]

In disassociate flow, the type_attrs is set to be NULL, which is in an
implicit way is checked in alloc_uobj() by "if (!attrs->context)".

Change the logic to rely on that check, to be consistent with other
alloc_uobj() places that will fix the following kernel splat.

 BUG: kernel NULL pointer dereference, address: 0000000000000018
 #PF: supervisor read access in kernel mode
 #PF: error_code(0x0000) - not-present page
 PGD 0 P4D 0
 Oops: 0000 [#1] SMP PTI
 CPU: 3 PID: 2743 Comm: python3 Not tainted 5.7.0-rc6-for-upstream-perf-2020-05-23_19-04-38-5 #1
 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014
 RIP: 0010:alloc_begin_fd_uobject+0x18/0xf0 [ib_uverbs]
 Code: 89 43 48 eb 97 66 66 66 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 41 55 49 89 f5 41 54 55 48 89 fd 53 48 83 ec 08 48 8b 1f <48> 8b 43 18 48 8b 80 80 00 00 00 48 3d 20 10 33 a0 74 1c 48 3d 30
 RSP: 0018:ffffc90001127b70 EFLAGS: 00010282
 RAX: ffffffffa0339fe0 RBX: 0000000000000000 RCX: 8000000000000007
 RDX: fffffffffffffffb RSI: ffffc90001127d28 RDI: ffff88843fe1f600
 RBP: ffff88843fe1f600 R08: ffff888461eb06d8 R09: ffff888461eb06f8
 R10: ffff888461eb0700 R11: 0000000000000000 R12: ffff88846a5f6450
 R13: ffffc90001127d28 R14: ffff88845d7d6ea0 R15: ffffc90001127cb8
 FS: 00007f469bff1540(0000) GS:ffff88846f980000(0000) knlGS:0000000000000000
 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 0000000000000018 CR3: 0000000450018003 CR4: 0000000000760ee0
 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
 PKRU: 55555554
 Call Trace:
 ? xa_store+0x28/0x40
 rdma_alloc_begin_uobject+0x4f/0x90 [ib_uverbs]
 ib_uverbs_create_comp_channel+0x87/0xf0 [ib_uverbs]
 ib_uverbs_handler_UVERBS_METHOD_INVOKE_WRITE+0xb1/0xf0 [ib_uverbs]
 ib_uverbs_cmd_verbs.isra.8+0x96d/0xae0 [ib_uverbs]
 ? get_page_from_freelist+0x3bb/0xf70
 ? _copy_to_user+0x22/0x30
 ? uverbs_disassociate_api+0xd0/0xd0 [ib_uverbs]
 ? __wake_up_common_lock+0x87/0xc0
 ib_uverbs_ioctl+0xbc/0x130 [ib_uverbs]
 ksys_ioctl+0x83/0xc0
 ? ksys_write+0x55/0xd0
 __x64_sys_ioctl+0x16/0x20
 do_syscall_64+0x48/0x130
 entry_SYSCALL_64_after_hwframe+0x44/0xa9
 RIP: 0033:0x7f469ac43267

Fixes: 849e149063bd ("RDMA/core: Do not allow alloc_commit to fail")
Link: https://lore.kernel.org/r/20200617061826.2625359-1-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/cma: Protect bind_list and listen_list while finding matching cm id

[ Upstream commit 730c8912484186d4623d0c76509066d285c3a755 ]

The bind_list and listen_list must be accessed under a lock, add the
missing locking around the access in cm_ib_id_from_event()

In addition add lockdep asserts to make it clearer what the locking
semantic is here.

  general protection fault: 0000 [#1] SMP NOPTI
  CPU: 226 PID: 126135 Comm: kworker/226:1 Tainted: G OE 4.12.14-150.47-default #1 SLE15
  Hardware name: Cray Inc. Windom/Windom, BIOS 0.8.7 01-10-2020
  Workqueue: ib_cm cm_work_handler [ib_cm]
  task: ffff9c5a60a1d2c0 task.stack: ffffc1d91f554000
  RIP: 0010:cma_ib_req_handler+0x3f1/0x11b0 [rdma_cm]
  RSP: 0018:ffffc1d91f557b40 EFLAGS: 00010286
  RAX: deacffffffffff30 RBX: 0000000000000001 RCX: ffff9c2af5bb6000
  RDX: 00000000000000a9 RSI: ffff9c5aa4ed2f10 RDI: ffffc1d91f557b08
  RBP: ffffc1d91f557d90 R08: ffff9c340cc80000 R09: ffff9c2c0f901900
  R10: 0000000000000000 R11: 0000000000000001 R12: deacffffffffff30
  R13: ffff9c5a48aeec00 R14: ffffc1d91f557c30 R15: ffff9c5c2eea3688
  FS: 0000000000000000(0000) GS:ffff9c5c2fa80000(0000) knlGS:0000000000000000
  CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 00002b5cc03fa320 CR3: 0000003f8500a000 CR4: 00000000003406e0
  Call Trace:
  ? rdma_addr_cancel+0xa0/0xa0 [ib_core]
  ? cm_process_work+0x28/0x140 [ib_cm]
  cm_process_work+0x28/0x140 [ib_cm]
  ? cm_get_bth_pkey.isra.44+0x34/0xa0 [ib_cm]
  cm_work_handler+0xa06/0x1a6f [ib_cm]
  ? __switch_to_asm+0x34/0x70
  ? __switch_to_asm+0x34/0x70
  ? __switch_to_asm+0x40/0x70
  ? __switch_to_asm+0x34/0x70
  ? __switch_to_asm+0x40/0x70
  ? __switch_to_asm+0x34/0x70
  ? __switch_to_asm+0x40/0x70
  ? __switch_to+0x7c/0x4b0
  ? __switch_to_asm+0x40/0x70
  ? __switch_to_asm+0x34/0x70
  process_one_work+0x1da/0x400
  worker_thread+0x2b/0x3f0
  ? process_one_work+0x400/0x400
  kthread+0x118/0x140
  ? kthread_create_on_node+0x40/0x40
  ret_from_fork+0x22/0x40
  Code: 00 66 83 f8 02 0f 84 ca 05 00 00 49 8b 84 24 d0 01 00 00 48 85 c0 0f 84 68 07 00 00 48 2d d0 01
  00 00 49 89 c4 0f 84 59 07 00 00 <41> 0f b7 44 24 20 49 8b 77 50 66 83 f8 0a 75 9e 49 8b 7c 24 28

Fixes: 4c21b5bcef73 ("IB/cma: Add net_dev and private data checks to RDMA CM")
Link: https://lore.kernel.org/r/20200616104304.2426081-1-leon@kernel.org
Signed-off-by: Mark Zhang <markz@mellanox.com>
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/qedr: Fix KASAN: use-after-free in ucma_event_handler+0x532

[ Upstream commit 0dfbd5ecf28cbcb81674c49d34ee97366db1be44 ]

Private data passed to iwarp_cm_handler is copied for connection request /
response, but ignored otherwise.  If junk is passed, it is stored in the
event and used later in the event processing.

The driver passes an old junk pointer during connection close which leads
to a use-after-free on event processing.  Set private data to NULL for
events that don 't have private data.

  BUG: KASAN: use-after-free in ucma_event_handler+0x532/0x560 [rdma_ucm]
  kernel: Read of size 4 at addr ffff8886caa71200 by task kworker/u128:1/5250
  kernel:
  kernel: Workqueue: iw_cm_wq cm_work_handler [iw_cm]
  kernel: Call Trace:
  kernel: dump_stack+0x8c/0xc0
  kernel: print_address_description.constprop.0+0x1b/0x210
  kernel: ? ucma_event_handler+0x532/0x560 [rdma_ucm]
  kernel: ? ucma_event_handler+0x532/0x560 [rdma_ucm]
  kernel: __kasan_report.cold+0x1a/0x33
  kernel: ? ucma_event_handler+0x532/0x560 [rdma_ucm]
  kernel: kasan_report+0xe/0x20
  kernel: check_memory_region+0x130/0x1a0
  kernel: memcpy+0x20/0x50
  kernel: ucma_event_handler+0x532/0x560 [rdma_ucm]
  kernel: ? __rpc_execute+0x608/0x620 [sunrpc]
  kernel: cma_iw_handler+0x212/0x330 [rdma_cm]
  kernel: ? iw_conn_req_handler+0x6e0/0x6e0 [rdma_cm]
  kernel: ? enqueue_timer+0x86/0x140
  kernel: ? _raw_write_lock_irq+0xd0/0xd0
  kernel: cm_work_handler+0xd3d/0x1070 [iw_cm]

Fixes: e411e0587e0d ("RDMA/qedr: Add iWARP connection management functions")
Link: https://lore.kernel.org/r/20200616093408.17827-1-michal.kalderon@marvell.com
Signed-off-by: Ariel Elior <ariel.elior@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/efa: Set maximum pkeys device attribute

[ Upstream commit 0133654d8eb8607eacc96badfe49bf992155f4cb ]

The max_pkeys device attribute was not set in query device verb, set it to
one in order to account for the default pkey (0xffff). This information is
exposed to userspace and can cause malfunction

Fixes: 40909f664d27 ("RDMA/efa: Add EFA verbs implementation")
Link: https://lore.kernel.org/r/20200614103534.88060-1-galpress@amazon.com
Reviewed-by: Firas JahJah <firasj@amazon.com>
Reviewed-by: Yossi Leybovich <sleybo@amazon.com>
Signed-off-by: Gal Pressman <galpress@amazon.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/rvt: Fix potential memory leak caused by rvt_alloc_rq

[ Upstream commit 90a239ee25fa3a483facec3de7c144361a3d3a51 ]

In case of failure of alloc_ud_wq_attr(), the memory allocated by
rvt_alloc_rq() is not freed. Fix it by calling rvt_free_rq() using the
existing clean-up code.

Fixes: d310c4bf8aea ("IB/{rdmavt, hfi1, qib}: Remove AH refcount for UD QPs")
Link: https://lore.kernel.org/r/20200614041148.131983-1-pakki001@umn.edu
Signed-off-by: Aditya Pakki <pakki001@umn.edu>
Acked-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

rxrpc: Fix handling of rwind from an ACK packet

[ Upstream commit a2ad7c21ad8cf1ce4ad65e13df1c2a1c29b38ac5 ]

The handling of the receive window size (rwind) from a received ACK packet
is not correct.  The rxrpc_input_ackinfo() function currently checks the
current Tx window size against the rwind from the ACK to see if it has
changed, but then limits the rwind size before storing it in the tx_winsize
member and, if it increased, wake up the transmitting process.  This means
that if rwind > RXRPC_RXTX_BUFF_SIZE - 1, this path will always be
followed.

Fix this by limiting rwind before we compare it to tx_winsize.

The effect of this can be seen by enabling the rxrpc_rx_rwind_change
tracepoint.

Fixes: 702f2ac87a9a ("rxrpc: Wake up the transmitter if Rx window size increases on the peer")
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: NSP: Correct FA2 mailbox node

[ Upstream commit ac4e106d8934a5894811fc263f4b03fc8ed0fb7a ]

The FA2 mailbox is specified at 0x18025000 but should actually be
0x18025c00, length 0x400 according to socregs_nsp.h and board_bu.c. Also
the interrupt was off by one and should be GIC SPI 151 instead of 150.

Fixes: 17d517172300 ("ARM: dts: NSP: Add mailbox (PDC) to NSP")
Signed-off-by: Matthew Hagan <mnhagan88@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf: Don't return EINVAL from {get,set}sockopt when optlen > PAGE_SIZE

[ Upstream commit d8fe449a9c51a37d844ab607e14e2f5c657d3cf2 ]

Attaching to these hooks can break iptables because its optval is
usually quite big, or at least bigger than the current PAGE_SIZE limit.
David also mentioned some SCTP options can be big (around 256k).

For such optvals we expose only the first PAGE_SIZE bytes to
the BPF program. BPF program has two options:
1. Set ctx->optlen to 0 to indicate that the BPF's optval
   should be ignored and the kernel should use original userspace
   value.
2. Set ctx->optlen to something that's smaller than the PAGE_SIZE.

v5:
* use ctx->optlen == 0 with trimmed buffer (Alexei Starovoitov)
* update the docs accordingly

v4:
* use temporary buffer to avoid optval == optval_end == NULL;
  this removes the corner case in the verifier that might assume
  non-zero PTR_TO_PACKET/PTR_TO_PACKET_END.

v3:
* don't increase the limit, bypass the argument

v2:
* proper comments formatting (Jakub Kicinski)

Fixes: 0d01da6afc54 ("bpf: implement getsockopt and setsockopt hooks")
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Cc: David Laight <David.Laight@ACULAB.COM>
Link: https://lore.kernel.org/bpf/20200617010416.93086-1-sdf@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

devmap: Use bpf_map_area_alloc() for allocating hash buckets

[ Upstream commit 99c51064fb06146b3d494b745c947e438a10aaa7 ]

Syzkaller discovered that creating a hash of type devmap_hash with a large
number of entries can hit the memory allocator limit for allocating
contiguous memory regions. There's really no reason to use kmalloc_array()
directly in the devmap code, so just switch it to the existing
bpf_map_area_alloc() function that is used elsewhere.

Fixes: 6f9d451ab1a3 ("xdp: Add devmap_hash map type for looking up devices by hashed index")
Reported-by: Xiumei Mu <xmu@redhat.com>
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20200616142829.114173-1-toke@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

regmap: Fix memory leak from regmap_register_patch

[ Upstream commit 95b2c3ec4cb1689db2389c251d39f64490ba641c ]

When a register patch is registered the reg_sequence is copied but the
memory allocated is never freed. Add a kfree in regmap_exit to clean it
up.

Fixes: 22f0d90a3482 ("regmap: Support register patch sets")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20200617152129.19655-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

efi/x86: Setup stack correctly for efi_pe_entry

[ Upstream commit 41d90b0c1108d1e46c48cf79964636c553844f4c ]

Commit

  17054f492dfd ("efi/x86: Implement mixed mode boot without the handover protocol")

introduced a new entry point for the EFI stub to be booted in mixed mode
on 32-bit firmware.

When entered via efi32_pe_entry, control is first transferred to
startup_32 to setup for the switch to long mode, and then the EFI stub
proper is entered via efi_pe_entry. efi_pe_entry is an MS ABI function,
and the ABI requires 32 bytes of shadow stack space to be allocated by
the caller, as well as the stack being aligned to 8 mod 16 on entry.

Allocate 40 bytes on the stack before switching to 64-bit mode when
calling efi_pe_entry to account for this.

For robustness, explicitly align boot_stack_end to 16 bytes. It is
currently implicitly aligned since .bss is cacheline-size aligned,
head_64.o is the first object file with a .bss section, and the heap and
boot sizes are aligned.

Fixes: 17054f492dfd ("efi/x86: Implement mixed mode boot without the handover protocol")
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Link: https://lore.kernel.org/r/20200617131957.2507632-1-nivedita@alum.mit.edu
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

x86/resctrl: Fix a NULL vs IS_ERR() static checker warning in rdt_cdp_peer_get()

[ Upstream commit cc5277fe66cf3ad68f41f1c539b2ef0d5e432974 ]

The callers don't expect *d_cdp to be set to an error pointer, they only
check for NULL.  This leads to a static checker warning:

  arch/x86/kernel/cpu/resctrl/rdtgroup.c:2648 __init_one_rdt_domain()
  warn: 'd_cdp' could be an error pointer

This would not trigger a bug in this specific case because
__init_one_rdt_domain() calls it with a valid domain that would not have
a negative id and thus not trigger the return of the ERR_PTR(). If this
was a negative domain id then the call to rdt_find_domain() in
domain_add_cpu() would have returned the ERR_PTR() much earlier and the
creation of the domain with an invalid id would have been prevented.

Even though a bug is not triggered currently the right and safe thing to
do is to set the pointer to NULL because that is what can be checked for
when the caller is handling the CDP and non-CDP cases.

Fixes: 52eb74339a62 ("x86/resctrl: Fix rdt_find_domain() return value and checks")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Reinette Chatre <reinette.chatre@intel.com>
Acked-by: Fenghua Yu <fenghua.yu@intel.com>
Link: https://lkml.kernel.org/r/20200602193611.GA190851@mwanda
Signed-off-by: Sasha Levin <sashal@kernel.org>

dma-direct: check return value when encrypting or decrypting memory

[ Upstream commit 56fccf21d1961a06e2a0c96ce446ebf036651062 ]

__change_page_attr() can fail which will cause set_memory_encrypted() and
set_memory_decrypted() to return non-zero.

If the device requires unencrypted DMA memory and decryption fails, simply
free the memory and fail.

If attempting to re-encrypt in the failure path and that encryption fails,
there is no alternative other than to leak the memory.

Fixes: c10f07aa27da ("dma/direct: Handle force decryption for DMA coherent buffers in common code")
Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dma-direct: re-encrypt memory if dma_direct_alloc_pages() fails

[ Upstream commit 96a539fa3bb71f443ae08e57b9f63d6e5bb2207c ]

If arch_dma_set_uncached() fails after memory has been decrypted, it needs
to be re-encrypted before freeing.

Fixes: fa7e2247c572 ("dma-direct: make uncached_kernel_address more general")
Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: Fix duovero smsc interrupt for suspend

[ Upstream commit 9cf28e41f9f768791f54ee18333239fda6927ed8 ]

While testing the recent suspend and resume regressions I noticed that
duovero can still end up losing edge gpio interrupts on runtime
suspend. This causes NFSroot easily stopping working after resume on
duovero.

Let's fix the issue by using gpio level interrupts for smsc as then
the gpio interrupt state is seen by the gpio controller on resume.

Fixes: 731b409878a3 ("ARM: dts: Configure duovero for to allow core retention during idle")
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: am335x-pocketbeagle: Fix mmc0 Write Protect

[ Upstream commit d7af722344e6dc52d87649100516515263e15c75 ]

AM3358 pin mcasp0_aclkr (ZCZ ball B13) [0] is routed to P1.31 header [1]
Mode 4 of this pin is mmc0_sdwp (SD Write Protect).  A signal connected
to P1.31 may accidentally trigger mmc0 write protection.  To avoid this
situation, do not put mcasp0_aclkr in mode 4 (mmc0_sdwp) by default.

[0] http://www.ti.com/lit/ds/symlink/am3358.pdf
[1] https://github.com/beagleboard/pocketbeagle/wiki/System-Reference-Manual#531_Expansion_Headers

Fixes: 047905376a16 (ARM: dts: Add am335x-pocketbeagle)
Signed-off-by: Robert Nelson <robertcnelson@gmail.com>
Signed-off-by: Drew Fustini <drew@beagleboard.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf, xdp, samples: Fix null pointer dereference in *_user code

[ Upstream commit 6903cdae9f9f08d61e49c16cbef11c293e33a615 ]

Memset on the pointer right after malloc can cause a NULL pointer
deference if it failed to allocate memory. A simple fix is to
replace malloc()/memset() pair with a simple call to calloc().

Fixes: 0fca931a6f21 ("samples/bpf: program demonstrating access to xdp_rxq_info")
Signed-off-by: Gaurav Singh <gaurav1086@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

samples/bpf: xdp_redirect_cpu: Set MAX_CPUS according to NR_CPUS

[ Upstream commit 6a09815428547657f3ffd2f5c31ac2a191e7fdf3 ]

xdp_redirect_cpu is currently failing in bpf_prog_load_xattr()
allocating cpu_map map if CONFIG_NR_CPUS is less than 64 since
cpu_map_alloc() requires max_entries to be less than NR_CPUS.
Set cpu_map max_entries according to NR_CPUS in xdp_redirect_cpu_kern.c
and get currently running cpus in xdp_redirect_cpu_user.c

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/374472755001c260158c4e4b22f193bdd3c56fb7.1589300442.git.lorenzo@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: fsl_ssi: Fix bclk calculation for mono channel

[ Upstream commit ed1220df6e666500ebf58c4f2fccc681941646fb ]

For mono channel, SSI will switch to Normal mode.

In Normal mode and Network mode, the Word Length Control bits
control the word length divider in clock generator, which is
different with I2S Master mode (the word length is fixed to
32bit), it should be the value of params_width(hw_params).

The condition "slots == 2" is not good for I2S Master mode,
because for Network mode and Normal mode, the slots can also
be 2. Then we need to use (ssi->i2s_net & SSI_SCR_I2S_MODE_MASK)
to check if it is I2S Master mode.

So we refine the formula for mono channel, otherwise there
will be sound issue for S24_LE.

Fixes: b0a7043d5c2c ("ASoC: fsl_ssi: Caculate bit clock rate using slot number and width")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Nicolin Chen <nicoleotsuka@gmail.com>
Link: https://lore.kernel.org/r/034eff1435ff6ce300b6c781130cefd9db22ab9a.1592276147.git.shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: NSP: Disable PL330 by default, add dma-coherent property

[ Upstream commit b9dbe0101e344e8339406a11b7a91d4a0c50ad13 ]

Currently the PL330 is enabled by default. However if left in IDM reset, as is
the case with the Meraki and Synology NSP devices, the system will hang when
probing for the PL330's AMBA peripheral ID. We therefore should be able to
disable it in these cases.

The PL330 is also included among of the list of peripherals put into coherent
mode, so "dma-coherent" has been added here as well.

Fixes: 5fa1026a3e4d ("ARM: dts: NSP: Add PL330 support")
Signed-off-by: Matthew Hagan <mnhagan88@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/siw: Fix pointer-to-int-cast warning in siw_rx_pbl()

[ Upstream commit 6769b275a313c76ddcd7d94c632032326db5f759 ]

The variable buf_addr is type dma_addr_t, which may not be the same size
as a pointer.  To ensure it is the correct size, cast to a uintptr_t.

Fixes: c536277e0db1 ("RDMA/siw: Fix 64/32bit pointer inconsistency")
Link: https://lore.kernel.org/r/20200610174717.15932-1-tseewald@gmail.com
Signed-off-by: Tom Seewald <tseewald@gmail.com>
Reviewed-by: Bernard Metzler <bmt@zurich.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

efi/libstub: Fix path separator regression

[ Upstream commit 7a88a6227dc7f2e723bba11ece05e57bd8dce8e4 ]

Commit 9302c1bb8e47 ("efi/libstub: Rewrite file I/O routine") introduced a
regression that made a couple of (badly configured) systems fail to
boot [1]: Until 5.6, we silently accepted Unix-style file separators in
EFI paths, which might violate the EFI standard, but are an easy to make
mistake. This fix restores the pre-5.7 behaviour.

[1] https://bbs.archlinux.org/viewtopic.php?id=256273

Fixes: 9302c1bb8e47 ("efi/libstub: Rewrite file I/O routine")
Signed-off-by: Philipp Fent <fent@in.tum.de>
Link: https://lore.kernel.org/r/20200615115109.7823-1-fent@in.tum.de
[ardb: rewrite as chained if/else statements]
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

regualtor: pfuze100: correct sw1a/sw2 on pfuze3000

[ Upstream commit 6f1cf5257acc6e6242ddf2f52bc7912aed77b79f ]

PFUZE100_SWB_REG is not proper for sw1a/sw2, because enable_mask/enable_reg
is not correct. On PFUZE3000, sw1a/sw2 should be the same as sw1a/sw2 on
pfuze100 except that voltages are not linear, so add new PFUZE3000_SW_REG
and pfuze3000_sw_regulator_ops which like the non-linear PFUZE100_SW_REG
and pfuze100_sw_regulator_ops.

Fixes: 1dced996ee70 ("regulator: pfuze100: update voltage setting for pfuze3000 sw1a")
Reported-by: Christophe Meynard <Christophe.Meynard@ign.fr>
Signed-off-by: Robin Gong <yibin.gong@nxp.com>
Link: https://lore.kernel.org/r/1592171648-8752-1-git-send-email-yibin.gong@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: qcom: common: set correct directions for dailinks

[ Upstream commit a2120089251f1fe221305e88df99af16f940e236 ]

Currently both FE and BE dai-links are configured bi-directional,
However the DSP BE dais are only single directional,
so set the directions as supported by the BE dais.

Fixes: c25e295cd77b (ASoC: qcom: Add support to parse common audio device nodes)
Reported-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Tested-by: John Stultz <john.stultz@linaro.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20200612123711.29130-2-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoc: q6afe: add support to get port direction

[ Upstream commit 4a95737440d426e93441d49d11abf4c6526d4666 ]

This patch adds support to q6afe_is_rx_port() to get direction
of DSP BE dai port, this is useful for setting dailink
directions correctly.

Fixes: c25e295cd77b (ASoC: qcom: Add support to parse common audio device nodes)
Reported-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20200612123711.29130-1-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: soc-pcm: fix checks for multi-cpu FE dailinks

[ Upstream commit 96bf62f018f40cb5d4e4bed95e50fd990a2354af ]

soc_dpcm_fe_runtime_update() is called for all dailinks, and we want
to first discard all back-ends, then deal with front-ends.

The existing code first reports an error with multi-cpu front-ends,
and that check needs to be moved after we know that we are dealing
with a front-end.

Fixes: 6e1276a5e613d ('ASoC: Return error if the function does not support multi-cpu')
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
BugLink: https://github.com/thesofproject/linux/issues/1970
Link: https://lore.kernel.org/r/20200612203507.25621-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

efi/esrt: Fix reference count leak in esre_create_sysfs_entry.

[ Upstream commit 4ddf4739be6e375116c375f0a68bf3893ffcee21 ]

kobject_init_and_add() takes reference even when it fails.
If this function returns an error, kobject_put() must be called to
properly clean up the memory associated with the object. Previous
commit "b8eb718348b8" fixed a similar problem.

Fixes: 0bb549052d33 ("efi: Add esrt support")
Signed-off-by: Qiushi Wu <wu000273@umn.edu>
Link: https://lore.kernel.org/r/20200528183804.4497-1-wu000273@umn.edu
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

efi/tpm: Verify event log header before parsing

[ Upstream commit 7dfc06a0f25b593a9f51992f540c0f80a57f3629 ]

It is possible that the first event in the event log is not actually a
log header at all, but rather a normal event. This leads to the cast in
__calc_tpm2_event_size being an invalid conversion, which means that
the values read are effectively garbage. Depending on the first event's
contents, this leads either to apparently normal behaviour, a crash or
a freeze.

While this behaviour of the firmware is not in accordance with the
TCG Client EFI Specification, this happens on a Dell Precision 5510
with the TPM enabled but hidden from the OS ("TPM On" disabled, state
otherwise untouched). The EFI firmware claims that the TPM is present
and active and that it supports the TCG 2.0 event log format.

Fortunately, this can be worked around by simply checking the header
of the first event and the event log header signature itself.

Commit b4f1874c6216 ("tpm: check event log version before reading final
events") addressed a similar issue also found on Dell models.

Fixes: 6b0326190205 ("efi: Attempt to get the TCG2 event log in the boot stub")
Signed-off-by: Fabian Vogt <fvogt@suse.de>
Link: https://lore.kernel.org/r/1927248.evlx2EsYKh@linux-e202.suse.de
Bugzilla: https://bugzilla.suse.com/show_bug.cgi?id=1165773
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

x86/resctrl: Fix memory bandwidth counter width for AMD

[ Upstream commit 2c18bd525c47f882f033b0a813ecd09c93e1ecdf ]

Memory bandwidth is calculated reading the monitoring counter
at two intervals and calculating the delta. It is the software’s
responsibility to read the count often enough to avoid having
the count roll over _twice_ between reads.

The current code hardcodes the bandwidth monitoring counter's width
to 24 bits for AMD. This is due to default base counter width which
is 24. Currently, AMD does not implement the CPUID 0xF.[ECX=1]:EAX
to adjust the counter width. But, the AMD hardware supports much
wider bandwidth counter with the default width of 44 bits.

Kernel reads these monitoring counters every 1 second and adjusts the
counter value for overflow. With 24 bits and scale value of 64 for AMD,
it can only measure up to 1GB/s without overflowing. For the rates
above 1GB/s this will fail to measure the bandwidth.

Fix the issue setting the default width to 44 bits by adjusting the
offset.

AMD future products will implement CPUID 0xF.[ECX=1]:EAX.

 [ bp: Let the line stick out and drop {}-brackets around a single
   statement. ]

Fixes: 4d05bf71f157 ("x86/resctrl: Introduce AMD QOS feature")
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/159129975546.62538.5656031125604254041.stgit@naples-babu.amd.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

x86/resctrl: Support CPUID enumeration of MBM counter width

[ Upstream commit f3d44f18b0662327c42128b9d3604489bdb6e36f ]

The original Memory Bandwidth Monitoring (MBM) architectural
definition defines counters of up to 62 bits in the
IA32_QM_CTR MSR while the first-generation MBM implementation
uses statically defined 24 bit counters.

Expand the MBM CPUID enumeration properties to include the MBM
counter width. The previously undefined EAX output register contains,
in bits [7:0], the MBM counter width encoded as an offset from
24 bits. Enumerating this property is only specified for Intel
CPUs.

Suggested-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/afa3af2f753f6bc301fb743bc8944e749cb24afa.1588715690.git.reinette.chatre@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

x86/cpu: Move resctrl CPUID code to resctrl/

[ Upstream commit 0118ad82c2a64ebcf15d7565ed35361407efadfa ]

The function determining a platform's support and properties of cache
occupancy and memory bandwidth monitoring (properties of
X86_FEATURE_CQM_LLC) can be found among the common CPU code. After
the feature's properties is populated in the per-CPU data the resctrl
subsystem is the only consumer (via boot_cpu_data).

Move the function that obtains the CPU information used by resctrl to
the resctrl subsystem and rename it from init_cqm() to
resctrl_cpu_detect(). The function continues to be called from the
common CPU code. This move is done in preparation of the addition of some
vendor specific code.

No functional change.

Suggested-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/38433b99f9d16c8f4ee796f8cc42b871531fa203.1588715690.git.reinette.chatre@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: bcm: Select ARM_TIMER_SP804 for ARCH_BCM_NSP

[ Upstream commit 0386e9ce5877ee73e07675529d5ae594d00f0900 ]

The NSP SoC includes an SP804 timer so should be enabled here.

Fixes: a0efb0d28b77 ("ARM: dts: NSP: Add SP804 Support to DT")
Signed-off-by: Matthew Hagan <mnhagan88@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: BCM5301X: Add missing memory "device_type" for Luxul XWC-2000

[ Upstream commit de1f6d9304c38e414552c3565d36286609ced0c1 ]

This property is needed since commit abe60a3a7afb ("ARM: dts: Kill off
skeleton{64}.dtsi"). Without it booting silently hangs at:
[    0.000000] Memory policy: Data cache writealloc

Fixes: 984829e2d39b ("ARM: dts: BCM5301X: Add DT for Luxul XWC-2000")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

regulator: da9063: fix LDO9 suspend and warning.

[ Upstream commit d7442ba13d62de9afc4e57344a676f9f4623dcaa ]

Commit 99f75ce66619 ("regulator: da9063: fix suspend") converted
the regulators to use a common (corrected) suspend bit setting but
one of regulators (LDO9) slipped through the crack.

This means that the original problem was not fixed for LDO9 and
also leads to a warning found by the test robot.
da9063-regulator.c:515:3: warning: initialized field overwritten

Fix this by converting that regulator too like the others.

Fixes: 99f75ce66619 ("regulator: da9063: fix suspend")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Martin Fuzzey <martin.fuzzey@flowbird.group>
Link: https://lore.kernel.org/r/1591959073-16792-1-git-send-email-martin.fuzzey@flowbird.group
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: q6asm: handle EOS correctly

[ Upstream commit 6476b60f32866be49d05e2e0163f337374c55b06 ]

Successful send of EOS command does not indicate that EOS is actually
finished, correct event to wait EOS is finished is EOS_RENDERED event.
EOS_RENDERED means that the DSP has finished processing all the buffers
for that particular session and stream.

This patch fixes EOS handling!

Fixes: 68fd8480bb7b ("ASoC: qdsp6: q6asm: Add support to audio stream apis")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200611124159.20742-3-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: Fix am33xx.dtsi ti,sysc-mask wrong softreset flag

[ Upstream commit 9f872f924545324a06fa216ad38132804c20f2db ]

AM335x TRM: Figure 16-23 define sysconfig register and soft_reset
are in first position corresponding to SYSC_OMAP4_SOFTRESET defined
in ti-sysc.h.

Fixes: 0782e8572ce4 ("ARM: dts: Probe am335x musb with ti-sysc")
Signed-off-by: Oskar Holmlund <oskar@ohdata.se>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: Fix am33xx.dtsi USB ranges length

[ Upstream commit 3f311e8993ed18fb7325373ec0f82a7f8e8be82e ]

AM335x TRM: Table 2-1 defines USBSS - USB Queue Manager in memory region
0x4740 0000 to 0x4740 7FFF.

Looks like the older TRM revisions list the range from 0x5000 to 0x8000
as reserved.

Fixes: 0782e8572ce4 ("ARM: dts: Probe am335x musb with ti-sysc")
Signed-off-by: Oskar Holmlund <oskar@ohdata.se>
[tony@atomide.com: updated comments]
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

xfrm: Fix double ESP trailer insertion in IPsec crypto offload.

[ Upstream commit 94579ac3f6d0820adc83b5dc5358ead0158101e9 ]

During IPsec performance testing, we see bad ICMP checksum. The error packet
has duplicated ESP trailer due to double validate_xmit_xfrm calls. The first call
is from ip_output, but the packet cannot be sent because
netif_xmit_frozen_or_stopped is true and the packet gets dev_requeue_skb. The second
call is from NET_TX softirq. However after the first call, the packet already
has the ESP trailer.

Fix by marking the skb with XFRM_XMIT bit after the packet is handled by
validate_xmit_xfrm to avoid duplicate ESP trailer insertion.

Fixes: f6e27114a60a ("net: Add a xfrm validate function to validate_xmit_skb")
Signed-off-by: Huy Nguyen <huyn@mellanox.com>
Reviewed-by: Boris Pismenny <borisp@mellanox.com>
Reviewed-by: Raed Salem <raeds@mellanox.com>
Reviewed-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: OMAP2+: Fix legacy mode dss_reset

[ Upstream commit 77cad9dbc957f23a73169e8a8971186744296614 ]

We must check for "dss_core" instead of "dss" to avoid also matching
also "dss_dispc". This only matters for the mixed case of data
configured in device tree but with legacy booting ti,hwmods property
still enabled.

Fixes: 8b30919a4e3c ("ARM: OMAP2+: Handle reset quirks for dynamically allocated modules")
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bus: ti-sysc: Fix uninitialized framedonetv_irq

[ Upstream commit 085bc0e576a4bf53b67a917c54908f299a2fb949 ]

We are currently only setting the framedonetv_irq disabled for the SoCs
that don't have it. But we are never setting it enabled for the SoCs that
have it. Let's initialized it to true by default.

Fixes: 7324a7a0d5e2 ("bus: ti-sysc: Implement display subsystem reset quirk")
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bus: ti-sysc: Ignore clockactivity unless specified as a quirk

[ Upstream commit 08b91dd6e547467fad61a7c201ff71080d7ad65a ]

We must ignore the clockactivity bit for most modules and not set it
unless specified for the module with SYSC_QUIRK_USE_CLOCKACT. Otherwise
the interface clock can be automatically gated constantly causing
unexpected performance issues.

Fixes: ae9ae12e9daa ("bus: ti-sysc: Handle clockactivity for enable and disable")
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bus: ti-sysc: Use optional clocks on for enable and wait for softreset bit

[ Upstream commit d46f9fbec71997420e4fb83c04d9affdf423f879 ]

Some modules reset automatically when idled, and when re-enabled, we must
wait for the automatic OCP softreset to complete. And if optional clocks
are configured, we need to keep the clocks on while waiting for the reset
to complete.

Let's fix the issue by moving the OCP softreset code to a separate
function sysc_wait_softreset(), and call it also from sysc_enable_module()
with the optional clocks enabled.

This is based on what we're already doing for legacy platform data booting
in _enable_sysc().

Fixes: 7324a7a0d5e2 ("bus: ti-sysc: Implement display subsystem reset quirk")
Reported-by: Faiz Abbas <faiz_abbas@ti.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bus: ti-sysc: Flush posted write on enable and disable

[ Upstream commit 5ce8aee81be6c8bc19051d7c7b0d3cbb7ac5fc3f ]

Looks like we're missing flush of posted write after module enable and
disable. I've seen occasional errors accessing various modules, and it
is suspected that the lack of posted writes can also cause random reboots.

The errors we can see are similar to the one below from spi for example:

44000000.ocp:L3 Custom Error: MASTER MPU TARGET L4CFG (Read): Data Access
in User mode during Functional access
...
mcspi_wait_for_reg_bit
omap2_mcspi_transfer_one
spi_transfer_one_message
...

We also want to also flush posted write for disable. The clkctrl clock
disable happens after module disable, and we don't want to have the
module potentially stay active while we're trying to disable the clock.

Fixes: d59b60564cbf ("bus: ti-sysc: Add generic enable/disable functions")
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

IB/hfi1: Fix module use count flaw due to leftover module put calls

commit 822fbd37410639acdae368ea55477ddd3498651d upstream.

When the try_module_get calls were removed from opening and closing of the
i2c debugfs file, the corresponding module_put calls were missed.  This
results in an inaccurate module use count that requires a power cycle to
fix.

Fixes: 09fbca8e6240 ("IB/hfi1: No need to use try_module_get for debugfs")
Link: https://lore.kernel.org/r/20200623203230.106975.76240.stgit@awfm-01.aw.intel.com
Cc: <stable@vger.kernel.org>
Reviewed-by: Kaike Wan <kaike.wan@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

IB/mad: Fix use after free when destroying MAD agent

commit 116a1b9f1cb769b83e5adff323f977a62b1dcb2e upstream.

Currently, when RMPP MADs are processed while the MAD agent is destroyed,
it could result in use after free of rmpp_recv, as decribed below:

cpu-0 cpu-1
----- -----
ib_mad_recv_done()
 ib_mad_complete_recv()
  ib_process_rmpp_recv_wc()
unregister_mad_agent()
 ib_cancel_rmpp_recvs()
  cancel_delayed_work()
   process_rmpp_data()
    start_rmpp()
     queue_delayed_work(rmpp_recv->cleanup_work)
  destroy_rmpp_recv()
   free_rmpp_recv()
     cleanup_work()[1]
      spin_lock_irqsave(&rmpp_recv->agent->lock) <-- use after free

[1] cleanup_work() == recv_cleanup_handler

Fix it by waiting for the MAD agent reference count becoming zero before
calling to ib_cancel_rmpp_recvs().

Fixes: 9a41e38a467c ("IB/mad: Use IDR for agent IDs")
Link: https://lore.kernel.org/r/20200621104738.54850-2-leon@kernel.org
Signed-off-by: Shay Drory <shayd@mellanox.com>
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

loop: replace kill_bdev with invalidate_bdev

[ Upstream commit f4bd34b139a3fa2808c4205f12714c65e1548c6c ]

When a filesystem is mounted on a loop device and on a loop ioctl
LOOP_SET_STATUS64, because of kill_bdev, buffer_head mappings are getting
destroyed.
kill_bdev
  truncate_inode_pages
    truncate_inode_pages_range
      do_invalidatepage
        block_invalidatepage
          discard_buffer  -->clear BH_Mapped flag

sb_bread
  __bread_gfp
  bh = __getblk_gfp
  -->discard_buffer clear BH_Mapped flag
  __bread_slow
    submit_bh
      submit_bh_wbc
        BUG_ON(!buffer_mapped(bh))  --> hit this BUG_ON

Fixes: 5db470e229e2 ("loop: drop caches if offset or block_size are changed")
Signed-off-by: Zheng Bin <zhengbin13@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cdc-acm: Add DISABLE_ECHO quirk for Microchip/SMSC chip

commit 03894573f2913181ee5aae0089f333b2131f2d4b upstream.

USB_DEVICE(0x0424, 0x274e) can send data before cdc_acm is ready,
causing garbage chars on the TTY causing stray input to the shell
and/or login prompt.

Signed-off-by: Joakim Tjernlund <joakim.tjernlund@infinera.com>
Cc: stable@vger.kernel.org
Acked-by: Oliver Neukum <oneukum@suse.com>
Link: https://lore.kernel.org/r/20200605105418.22263-1-joakim.tjernlund@infinera.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xhci: Return if xHCI doesn't support LPM

commit f0c472a6da51f9fac15e80fe2fd9c83b68754cff upstream.

Just return if xHCI is quirked to disable LPM. We can save some time
from reading registers and doing spinlocks.

Add stable tag as we want this patch together with the next one,
"Poll for U0 after disabling USB2 LPM" which fixes a suspend issue
for some USB2 LPM devices

Cc: stable@vger.kernel.org
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20200624135949.22611-5-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xhci: Fix enumeration issue when setting max packet size for FS devices.

commit a73d9d9cfc3cfceabd91fb0b0c13e4062b6dbcd7 upstream.

Unable to complete the enumeration of a USB TV Tuner device.

Per XHCI spec (4.6.5), the EP state field of the input context shall
be cleared for a set address command. In the special case of an FS
device that has "MaxPacketSize0 = 8", the Linux XHCI driver does
not do this before evaluating the context. With an XHCI controller
that checks the EP state field for parameter context error this
causes a problem in cases such as the device getting reset again
after enumeration.

When that field is cleared, the problem does not occur.

This was found and fixed by Sasi Kumar.

Cc: stable@vger.kernel.org
Signed-off-by: Al Cooper <alcooperx@gmail.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20200624135949.22611-3-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xhci: Fix incorrect EP_STATE_MASK

commit dceea67058fe22075db3aed62d5cb62092be5053 upstream.

EP_STATE_MASK should be 0x7 instead of 0xf

xhci spec 6.2.3 shows that the EP state field in the endpoint context data
structure consist of bits [2:0].
The old value included a bit from the next field which fortunately is a
 RsvdZ region. So hopefully this hasn't caused too much harm

Cc: stable@vger.kernel.org
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20200624135949.22611-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cifs/smb3: Fix data inconsistent when zero file range

commit 6b69040247e14b43419a520f841f2b3052833df9 upstream.

CIFS implements the fallocate(FALLOC_FL_ZERO_RANGE) with send SMB
ioctl(FSCTL_SET_ZERO_DATA) to server. It just set the range of the
remote file to zero, but local page cache not update, then the data
inconsistent with server, which leads the xfstest generic/008 failed.

So we need to remove the local page caches before send SMB
ioctl(FSCTL_SET_ZERO_DATA) to server. After next read, it will
re-cache it.

Fixes: 30175628bf7f5 ("[SMB3] Enable fallocate -z support for SMB3 mounts")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhang Xiaoxu <zhangxiaoxu5@huawei.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Cc: stable@vger.kernel.org # v3.17
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cifs/smb3: Fix data inconsistent when punch hole

commit acc91c2d8de4ef46ed751c5f9df99ed9a109b100 upstream.

When punch hole success, we also can read old data from file:
  # strace -e trace=pread64,fallocate xfs_io -f -c "pread 20 40" \
           -c "fpunch 20 40" -c"pread 20 40" file
  pread64(3, " version 5.8.0-rc1+"..., 40, 20) = 40
  fallocate(3, FALLOC_FL_KEEP_SIZE|FALLOC_FL_PUNCH_HOLE, 20, 40) = 0
  pread64(3, " version 5.8.0-rc1+"..., 40, 20) = 40

CIFS implements the fallocate(FALLOCATE_FL_PUNCH_HOLE) with send SMB
ioctl(FSCTL_SET_ZERO_DATA) to server. It just set the range of the
remote file to zero, but local page caches not updated, then the
local page caches inconsistent with server.

Also can be found by xfstests generic/316.

So, we need to remove the page caches before send the SMB
ioctl(FSCTL_SET_ZERO_DATA) to server.

Fixes: 31742c5a33176 ("enable fallocate punch hole ("fallocate -p") for SMB3")
Suggested-by: Pavel Shilovsky <pshilov@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Zhang Xiaoxu <zhangxiaoxu5@huawei.com>
Cc: stable@vger.kernel.org # v3.17
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cifs: Fix cached_fid refcnt leak in open_shroot

commit 77577de64167aa0643d47ffbaacf3642632b321b upstream.

open_shroot() invokes kref_get(), which increases the refcount of the
"tcon->crfid" object. When open_shroot() returns not zero, it means the
open operation failed and close_shroot() will not be called to decrement
the refcount of the "tcon->crfid".

The reference counting issue happens in one normal path of
open_shroot(). When the cached root have been opened successfully in a
concurrent process, the function increases the refcount and jump to
"oshr_free" to return. However the current return value "rc" may not
equal to 0, thus the increased refcount will not be balanced outside the
function, causing a refcnt leak.

Fix this issue by setting the value of "rc" to 0 before jumping to
"oshr_free" label.

Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn>
Signed-off-by: Xin Tan <tanxin.ctf@gmail.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
CC: Stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: zfcp: Fix panic on ERP timeout for previously dismissed ERP action

commit 936e6b85da0476dd2edac7c51c68072da9fb4ba2 upstream.

Suppose that, for unrelated reasons, FSF requests on behalf of recovery are
very slow and can run into the ERP timeout.

In the case at hand, we did adapter recovery to a large degree.  However
due to the slowness a LUN open is pending so the corresponding fc_rport
remains blocked.  After fast_io_fail_tmo we trigger close physical port
recovery for the port under which the LUN should have been opened.  The new
higher order port recovery dismisses the pending LUN open ERP action and
dismisses the pending LUN open FSF request.  Such dismissal decouples the
ERP action from the pending corresponding FSF request by setting
zfcp_fsf_req->erp_action to NULL (among other things)
[zfcp_erp_strategy_check_fsfreq()].

If now the ERP timeout for the pending open LUN request runs out, we must
not use zfcp_fsf_req->erp_action in the ERP timeout handler.  This is a
problem since v4.15 commit 75492a51568b ("s390/scsi: Convert timers to use
timer_setup()"). Before that we intentionally only passed zfcp_erp_action
as context argument to zfcp_erp_timeout_handler().

Note: The lifetime of the corresponding zfcp_fsf_req object continues until
a (late) response or an (unrelated) adapter recovery.

Just like the regular response path ignores dismissed requests
[zfcp_fsf_req_complete() => zfcp_fsf_protstatus_eval() => return early] the
ERP timeout handler now needs to ignore dismissed requests.  So simply
return early in the ERP timeout handler if the FSF request is marked as
dismissed in its status flags.  To protect against the race where
zfcp_erp_strategy_check_fsfreq() dismisses and sets
zfcp_fsf_req->erp_action to NULL after our previous status flag check,
return early if zfcp_fsf_req->erp_action is NULL.  After all, the former
ERP action does not need to be woken up as that was already done as part of
the dismissal above [zfcp_erp_action_dismiss()].

This fixes the following panic due to kernel page fault in IRQ context:

Unable to handle kernel pointer dereference in virtual kernel address space
Failing address: 0000000000000000 TEID: 0000000000000483
Fault in home space mode while using kernel ASCE.
AS:000009859238c00b R2:00000e3e7ffd000b R3:00000e3e7ffcc007 S:00000e3e7ffd7000 P:000000000000013d
Oops: 0004 ilc:2 [#1] SMP
Modules linked in: ...
CPU: 82 PID: 311273 Comm: stress Kdump: loaded Tainted: G            E  X   ...
Hardware name: IBM 8561 T01 701 (LPAR)
Krnl PSW : 0404c00180000000 001fffff80549be0 (zfcp_erp_notify+0x40/0xc0 [zfcp])
           R:0 T:1 IO:0 EX:0 Key:0 M:1 W:0 P:0 AS:3 CC:0 PM:0 RI:0 EA:3
Krnl GPRS: 0000000000000080 00000e3d00000000 00000000000000f0 0000000000030000
           000000010028e700 000000000400a39c 000000010028e700 00000e3e7cf87e02
           0000000010000000 0700098591cb67f0 0000000000000000 0000000000000000
           0000033840e9a000 0000000000000000 001fffe008d6bc18 001fffe008d6bbc8
Krnl Code: 001fffff80549bd4: a7180000            lhi     %r1,0
           001fffff80549bd8: 4120a0f0            la      %r2,240(%r10)
          #001fffff80549bdc: a53e0003            llilh   %r3,3
          >001fffff80549be0: ba132000            cs      %r1,%r3,0(%r2)
           001fffff80549be4: a7740037            brc     7,1fffff80549c52
           001fffff80549be8: e320b0180004        lg      %r2,24(%r11)
           001fffff80549bee: e31020e00004        lg      %r1,224(%r2)
           001fffff80549bf4: 412020e0            la      %r2,224(%r2)
Call Trace:
 [<001fffff80549be0>] zfcp_erp_notify+0x40/0xc0 [zfcp]
 [<00000985915e26f0>] call_timer_fn+0x38/0x190
 [<00000985915e2944>] expire_timers+0xfc/0x190
 [<00000985915e2ac4>] run_timer_softirq+0xec/0x218
 [<0000098591ca7c4c>] __do_softirq+0x144/0x398
 [<00000985915110aa>] do_softirq_own_stack+0x72/0x88
 [<0000098591551b58>] irq_exit+0xb0/0xb8
 [<0000098591510c6a>] do_IRQ+0x82/0xb0
 [<0000098591ca7140>] ext_int_handler+0x128/0x12c
 [<0000098591722d98>] clear_subpage.constprop.13+0x38/0x60
([<000009859172ae4c>] clear_huge_page+0xec/0x250)
 [<000009859177e7a2>] do_huge_pmd_anonymous_page+0x32a/0x768
 [<000009859172a712>] __handle_mm_fault+0x88a/0x900
 [<000009859172a860>] handle_mm_fault+0xd8/0x1b0
 [<0000098591529ef6>] do_dat_exception+0x136/0x3e8
 [<0000098591ca6d34>] pgm_check_handler+0x1c8/0x220
Last Breaking-Event-Address:
 [<001fffff80549c88>] zfcp_erp_timeout_handler+0x10/0x18 [zfcp]
Kernel panic - not syncing: Fatal exception in interrupt

Link: https://lore.kernel.org/r/20200623140242.98864-1-maier@linux.ibm.com
Fixes: 75492a51568b ("s390/scsi: Convert timers to use timer_setup()")
Cc: <stable@vger.kernel.org> #4.15+
Reviewed-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: qla2xxx: Keep initiator ports after RSCN

commit 632f24f09d5b7c8a2f94932c3391ca957ae76cc4 upstream.

The driver performs SCR (state change registration) in all modes including
pure target mode.

For each RSCN, scan_needed flag is set in qla2x00_handle_rscn() for the
port mentioned in the RSCN and fabric rescan is scheduled. During the
rescan, GNN_FT handler, qla24xx_async_gnnft_done() deletes session of the
port that caused the RSCN.

In target mode, the session deletion has an impact on ATIO handler,
qlt_24xx_atio_pkt(). Target responds with SAM STATUS BUSY to I/O incoming
from the deleted session. qlt_handle_cmd_for_atio() and
qlt_handle_task_mgmt() return -EFAULT if they are not able to find session
of the command/TMF, and that results in invocation of qlt_send_busy():

  qlt_24xx_atio_pkt_all_vps: qla_target(0): type 6 ox_id 0014
  qla_target(0): Unable to send command to target, sending BUSY status

Such response causes command timeout on the initiator. Error handler thread
on the initiator will be spawned to abort the commands:

  scsi 23:0:0:0: tag#0 abort scheduled
  scsi 23:0:0:0: tag#0 aborting command
  qla2xxx [0000:af:00.0]-188c:23: Entered qla24xx_abort_command.
  qla2xxx [0000:af:00.0]-801c:23: Abort command issued nexus=23:0:0 -- 0 2003.

Command abort is rejected by target and fails (2003), error handler then
tries to perform DEVICE RESET and TARGET RESET but they're also doomed to
fail because TMFs are ignored for the deleted sessions.

Then initiator makes BUS RESET that resets the link via
qla2x00_full_login_lip(). BUS RESET succeeds and brings initiator port up,
SAN switch detects that and sends RSCN to the target port and it fails
again the same way as described above. It never goes out of the loop.

The change breaks the RSCN loop by keeping initiator sessions mentioned in
RSCN payload in all modes, including dual and pure target mode.

Link: https://lore.kernel.org/r/20200605144435.27023-1-r.bolshakov@yadro.com
Fixes: 2037ce49d30a ("scsi: qla2xxx: Fix stale session")
Cc: Quinn Tran <qutran@marvell.com>
Cc: Arun Easi <aeasi@marvell.com>
Cc: Nilesh Javali <njavali@marvell.com>
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Daniel Wagner <dwagner@suse.de>
Cc: Himanshu Madhani <himanshu.madhani@oracle.com>
Cc: Martin Wilck <mwilck@suse.com>
Cc: stable@vger.kernel.org # v5.4+
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Reviewed-by: Shyam Sundar <ssundar@marvell.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: cdns3: ep0: add spinlock for cdns3_check_new_setup

commit 2587a029fa2a877d0a8dda955ef1b24c94b4bd0e upstream.

The other thread may access other endpoints when the cdns3_check_new_setup
is handling, add spinlock to protect it.

Cc: <stable@vger.kernel.org>
Fixes: 7733f6c32e36 ("usb: cdns3: Add Cadence USB3 DRD Driver")
Reviewed-by: Pawel Laszczak <pawell@cadence.com>
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: cdns3: ep0: fix the test mode set incorrectly

commit b51e1cf64f93acebb6d8afbacd648a6ecefc39b4 upstream.

The 'tmode' is ctrl->wIndex, changing it as the real test
mode value for register assignment.

Cc: <stable@vger.kernel.org>
Fixes: 7733f6c32e36 ("usb: cdns3: Add Cadence USB3 DRD Driver")
Reviewed-by: Jun Li <jun.li@nxp.com>
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: cdns3: trace: using correct dir value

commit ba3a80fe0fb67d8790f62b7bc60df97406d89871 upstream.

It should use the correct direction value from register, not depends
on previous software setting. It fixed the EP number wrong issue at
trace when the TRBERR interrupt occurs for EP0IN.

When the EP0IN IOC has finished, software prepares the setup packet
request, the expected direction is OUT, but at that time, the TRBERR
for EP0IN may occur since it is DMULT mode, the DMA does not stop
until TRBERR has met.

Cc: <stable@vger.kernel.org>
Fixes: 7733f6c32e36 ("usb: cdns3: Add Cadence USB3 DRD Driver")
Reviewed-by: Pawel Laszczak <pawell@cadence.com>
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: usb-audio: Fix OOB access of mixer element list

commit 220345e98f1cdc768eeb6e3364a0fa7ab9647fe7 upstream.

The USB-audio mixer code holds a linked list of usb_mixer_elem_list,
and several operations are performed for each mixer element.  A few of
them (snd_usb_mixer_notify_id() and snd_usb_mixer_interrupt_v2())
assume each mixer element being a usb_mixer_elem_info object that is a
subclass of usb_mixer_elem_list, cast via container_of() and access it
members.  This may result in an out-of-bound access when a
non-standard list element has been added, as spotted by syzkaller
recently.

This patch adds a new field, is_std_info, in usb_mixer_elem_list to
indicate that the element is the usb_mixer_elem_info type or not, and
skip the access to such an element if needed.

Reported-by: syzbot+fb14314433463ad51625@syzkaller.appspotmail.com
Reported-by: syzbot+2405ca3401e943c538b5@syzkaller.appspotmail.com
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200624122340.9615-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: usb-audio: add quirk for Samsung USBC Headset (AKG)

commit a32a1fc99807244d920d274adc46ba04b538cc8a upstream.

We've found Samsung USBC Headset (AKG) (VID: 0x04e8, PID: 0xa051)
need a tiny delay after each class compliant request.
Otherwise the device might not be able to be recognized each times.

Signed-off-by: Chihhao Chen <chihhao.chen@mediatek.com>
Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/1592910203-24035-1-git-send-email-macpaul.lin@mediatek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: usb-audio: Add registration quirk for Kingston HyperX Cloud Flight S

commit 73094608b8e214952444fb104651704c98a37aeb upstream.

Similar to the Kingston HyperX AMP, the Kingston HyperX Cloud
Alpha S (0951:0x16ea) uses two interfaces, but only the second
interface contains the capture stream. This patch delays the
registration until the second interface appears.

Signed-off-by: Christoffer Nielsen <cn@obviux.dk>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/CAOtG2YHOM3zy+ed9KS-J4HkZo_QGzcUG9MigSp4e4_-13r6B=Q@mail.gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: usb-audio: Set 48 kHz rate for Rodecaster

commit 8abf41dcd1bcdda0d09905fb59d18f45c035c752 upstream.

Like the Line6 devices, the Rode Rodecaster Pro does not support
UAC2_CS_RANGE and only supports a sample rate of 48 kHz.

Tested against a Rode Rodecaster Pro.

Tested-by: Christopher Swenson <swenson@swenson.io>
Signed-off-by: Christopher Swenson <swenson@swenson.io>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/ebdb9e72-9649-0b5e-b9b9-d757dbf26927@swenson.io
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: usb-audio: add quirk for Denon DCD-1500RE

commit c9808bbfed3cfc911ecb60fe8e80c0c27876c657 upstream.

fix error "clock source 41 is not valid, cannot use"

[] New USB device found, idVendor=154e, idProduct=1002, bcdDevice= 1.00
[] New USB device strings: Mfr=1, Product=2, SerialNumber=0
[] Product: DCD-1500RE
[] Manufacturer: D & M Holdings Inc.
[]
[] clock source 41 is not valid, cannot use
[] usbcore: registered new interface driver snd-usb-audio

Signed-off-by: Yick W. Tse <y_w_tse@yahoo.com.hk>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/1373857985.210365.1592048406997@mail.yahoo.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: usb-audio: Add implicit feedback quirk for SSL2+.

commit e7585db1b0b5b4e4eb1967bb1472df308f7ffcbf upstream.

This uses the same quirk as the Motu M2 and M4 to ensure the driver uses the
audio interface's clock. Tested on an SSL2+.

Signed-off-by: Laurence Tratt <laurie@tratt.net>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200612111807.dgnig6rwhmsl2bod@overdrive.tratt.net
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: typec: mux: intel_pmc_mux: Fix DP alternate mode entry

commit 130206a88683d859f63ed6d4a56ab5c2b4930c8e upstream.

The PMC needs to be notified separately about HPD (hotplug
detected) signal being high after mode entry. There is a bit
"HPD High" in the Alternate Mode Request that the driver
already sets, but that bit is only valid when the
DisplayPort Alternate Mode is directly entered from
disconnected state.

Fixes: 5c4edcdbcd97 ("usb: typec: mux: intel: Fix DP_HPD_LVL bit field")
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Cc: stable <stable@vger.kernel.org>
Tested-by: Prashant Malani <pmalani@chromium.org>
Link: https://lore.kernel.org/r/20200529131753.15587-1-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: typec: tcpci_rt1711h: avoid screaming irq causing boot hangs

commit 302c570bf36e997d55ad0d60628a2feec76954a4 upstream.

John reported screaming irq caused by rt1711h when system boot[1],
this is because irq request is done before tcpci_register_port(),
so the chip->tcpci has not been setup, irq handler is entered but
can't do anything, this patch is to address this by moving the irq
request after tcpci_register_port().

[1] https://lore.kernel.org/linux-usb/20200530040157.31038-1-john.stultz@linaro.org

Fixes: ce08eaeb6388 ("staging: typec: rt1711h typec chip driver")
Cc: stable <stable@vger.kernel.org> # v4.18+
Cc: John Stultz <john.stultz@linaro.org>
Reported-and-tested-by: John Stultz <john.stultz@linaro.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Li Jun <jun.li@nxp.com>
Link: https://lore.kernel.org/r/20200604112118.38062-1-jun.li@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: host: ehci-exynos: Fix error check in exynos_ehci_probe()

commit 44ed240d62736ad29943ec01e41e194b96f7c5e9 upstream.

If the function platform_get_irq() failed, the negative value
returned will not be detected here. So fix error handling in
exynos_ehci_probe(). And when get irq failed, the function
platform_get_irq() logs an error message, so remove redundant
message here.

Fixes: 1bcc5aa87f04 ("USB: Add initial S5P EHCI driver")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com>
Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com>
Link: https://lore.kernel.org/r/20200602114708.28620-1-tangbin@cmss.chinamobile.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xhci: Poll for U0 after disabling USB2 LPM

commit b3d71abd135e6919ca0b6cab463738472653ddfb upstream.

USB2 devices with LPM enabled may interrupt the system suspend:
[  932.510475] usb 1-7: usb suspend, wakeup 0
[  932.510549] hub 1-0:1.0: hub_suspend
[  932.510581] usb usb1: bus suspend, wakeup 0
[  932.510590] xhci_hcd 0000:00:14.0: port 9 not suspended
[  932.510593] xhci_hcd 0000:00:14.0: port 8 not suspended
..
[  932.520323] xhci_hcd 0000:00:14.0: Port change event, 1-7, id 7, portsc: 0x400e03
..
[  932.591405] PM: pci_pm_suspend(): hcd_pci_suspend+0x0/0x30 returns -16
[  932.591414] PM: dpm_run_callback(): pci_pm_suspend+0x0/0x160 returns -16
[  932.591418] PM: Device 0000:00:14.0 failed to suspend async: error -16

During system suspend, USB core will let HC suspends the device if it
doesn't have remote wakeup enabled and doesn't have any children.
However, from the log above we can see that the usb 1-7 doesn't get bus
suspended due to not in U0. After a while the port finished U2 -> U0
transition, interrupts the suspend process.

The observation is that after disabling LPM, port doesn't transit to U0
immediately and can linger in U2. xHCI spec 4.23.5.2 states that the
maximum exit latency for USB2 LPM should be BESL + 10us. The BESL for
the affected device is advertised as 400us, which is still not enough
based on my testing result.

So let's use the maximum permitted latency, 10000, to poll for U0
status to solve the issue.

Cc: stable@vger.kernel.org
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20200624135949.22611-6-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: host: xhci-mtk: avoid runtime suspend when removing hcd

commit a24d5072e87457a14023ee1dd3fc8b1e76f899ef upstream.

When runtime suspend was enabled, runtime suspend might happen
when xhci is removing hcd. This might cause kernel panic when hcd
has been freed but runtime pm suspend related handle need to
reference it.

Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com>
Reviewed-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20200624135949.22611-4-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: ehci: reopen solution for Synopsys HC bug

commit 1ddcb71a3edf0e1682b6e056158e4c4b00325f66 upstream.

A Synopsys USB2.0 core used in Huawei Kunpeng920 SoC has a bug which
might cause the host controller not issuing ping.

Bug description:
After indicating an Interrupt on Async Advance, the software uses the
doorbell mechanism to delete the Next Link queue head of the last
executed queue head. At this time, the host controller still references
the removed queue head(the queue head is NULL). NULL reference causes
the host controller to lose the USB device.

Solution:
After deleting the Next Link queue head, when has_synopsys_hc_bug set
to 1，the software can write one of the valid queue head addresses to
the ASYNCLISTADDR register to allow the host controller to get
the valid queue head. in order to solve that problem, this patch set
the flag for Huawei Kunpeng920

There are detailed instructions and solutions in this patch:
commit 2f7ac6c19997 ("USB: ehci: add workaround for Synopsys HC bug")

Signed-off-by: Longfang Liu <liulongfang@huawei.com>
Cc: stable <stable@vger.kernel.org>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/1591588019-44284-1-git-send-email-liulongfang@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: add USB_QUIRK_DELAY_INIT for Logitech C922

commit 5d8021923e8a8cc37a421a64e27c7221f0fee33c upstream.

The Logitech C922, just like other Logitech webcams,
needs the USB_QUIRK_DELAY_INIT or it will randomly
not respond after device connection

Signed-off-by: Tomasz Meresiński <tomasz@meresinski.eu>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200603203347.7792-1-tomasz@meresinski.eu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: dwc2: Postponed gadget registration to the udc class driver

commit 207324a321a866401b098cadf19e4a2dd6584622 upstream.

During dwc2 driver probe, after gadget registration to the udc class
driver, if exist any builtin function driver it immediately bound to
dwc2 and after init host side (dwc2_hcd_init()) stucked in host mode.
Patch postpone gadget registration after host side initialization done.

Fixes: 117777b2c3bb9 ("usb: dwc2: Move gadget probe function into platform code")
Reported-by: kbuild test robot <lkp@intel.com>
Tested-by: Marek Vasut <marex@denx.de>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Minas Harutyunyan <hminas@synopsys.com>
Link: https://lore.kernel.org/r/f21cb38fecc72a230b86155d94c7e60c9cb66f58.1591690938.git.hminas@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: ohci-sm501: Add missed iounmap() in remove

commit 07c112fb09c86c0231f6ff0061a000ffe91c8eb9 upstream.

This driver misses calling iounmap() in remove to undo the ioremap()
called in probe.
Add the missed call to fix it.

Fixes: f54aab6ebcec ("usb: ohci-sm501 driver")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20200610024844.3628408-1-hslester96@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "usb: dwc3: exynos: Add support for Exynos5422 suspend clk"

commit ad38beb373a14e082f4e64b68c0b6e6b09764680 upstream.

This reverts commit 07f6842341abe978e6375078f84506ec3280ece5.

Since SCLK_SCLK_USBD300 suspend clock need to be configured
for phy module, I wrongly mapped this clock to DWC3 code.

Cc: Felipe Balbi <balbi@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Anand Moon <linux.amoon@gmail.com>
Cc: stable <stable@vger.kernel.org>
Fixes: 07f6842341ab ("usb: dwc3: exynos: Add support for Exynos5422 suspend clk")
Link: https://lore.kernel.org/r/20200623074637.756-1-linux.amoon@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mei: me: add tiger lake point device ids for H platforms.

commit 8c289ea064165237891a7b4be77b74d5cba8fa99 upstream.

Add Tiger Lake device ids H for HECI1.
TGH_H is also used in Tatlow SPS platform we need to
disable the mei interface there.

Cc: <stable@vger.kernel.org>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20200619165121.2145330-7-tomas.winkler@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>