nvme-rdma: fix timeout handler

[ Upstream commit 0475a8dcbcee92a5d22e40c9c6353829fc6294b8 ]

When a request times out in a LIVE state, we simply trigger error
recovery and let the error recovery handle the request cancellation,
however when a request times out in a non LIVE state, we make sure to
complete it immediately as it might block controller setup or teardown
and prevent forward progress.

However tearing down the entire set of I/O and admin queues causes
freeze/unfreeze imbalance (q->mq_freeze_depth) because and is really
an overkill to what we actually need, which is to just fence controller
teardown that may be running, stop the queue, and cancel the request if
it is not already completed.

Now that we have the controller teardown_lock, we can safely serialize
request cancellation. This addresses a hang caused by calling extra
queue freeze on controller namespaces, causing unfreeze to not complete
correctly.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nvme-rdma: serialize controller teardown sequences

[ Upstream commit 5110f40241d08334375eb0495f174b1d2c07657e ]

In the timeout handler we may need to complete a request because the
request that timed out may be an I/O that is a part of a serial sequence
of controller teardown or initialization. In order to complete the
request, we need to fence any other context that may compete with us
and complete the request that is timing out.

In this case, we could have a potential double completion in case
a hard-irq or a different competing context triggered error recovery
and is running inflight request cancellation concurrently with the
timeout handler.

Protect using a ctrl teardown_lock to serialize contexts that may
complete a cancelled request due to error recovery or a reset.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nvme-tcp: fix reset hang if controller died in the middle of a reset

[ Upstream commit e5c01f4f7f623e768e868bcc08d8e7ceb03b75d0 ]

If the controller becomes unresponsive in the middle of a reset, we will
hang because we are waiting for the freeze to complete, but that cannot
happen since we have commands that are inflight holding the
q_usage_counter, and we can't blindly fail requests that times out.

So give a timeout and if we cannot wait for queue freeze before
unfreezing, fail and have the error handling take care how to proceed
(either schedule a reconnect of remove the controller).

Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nvme-tcp: fix timeout handler

[ Upstream commit 236187c4ed195161dfa4237c7beffbba0c5ae45b ]

When a request times out in a LIVE state, we simply trigger error
recovery and let the error recovery handle the request cancellation,
however when a request times out in a non LIVE state, we make sure to
complete it immediately as it might block controller setup or teardown
and prevent forward progress.

However tearing down the entire set of I/O and admin queues causes
freeze/unfreeze imbalance (q->mq_freeze_depth) because and is really
an overkill to what we actually need, which is to just fence controller
teardown that may be running, stop the queue, and cancel the request if
it is not already completed.

Now that we have the controller teardown_lock, we can safely serialize
request cancellation. This addresses a hang caused by calling extra
queue freeze on controller namespaces, causing unfreeze to not complete
correctly.

Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nvme-tcp: serialize controller teardown sequences

[ Upstream commit d4d61470ae48838f49e668503e840e1520b97162 ]

In the timeout handler we may need to complete a request because the
request that timed out may be an I/O that is a part of a serial sequence
of controller teardown or initialization. In order to complete the
request, we need to fence any other context that may compete with us
and complete the request that is timing out.

In this case, we could have a potential double completion in case
a hard-irq or a different competing context triggered error recovery
and is running inflight request cancellation concurrently with the
timeout handler.

Protect using a ctrl teardown_lock to serialize contexts that may
complete a cancelled request due to error recovery or a reset.

Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nvme: have nvme_wait_freeze_timeout return if it timed out

[ Upstream commit 7cf0d7c0f3c3b0203aaf81c1bc884924d8fdb9bd ]

Users can detect if the wait has completed or not and take appropriate
actions based on this information (e.g. weather to continue
initialization or rather fail and schedule another initialization
attempt).

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nvme-fabrics: don't check state NVME_CTRL_NEW for request acceptance

[ Upstream commit d7144f5c4cf4de95fdc3422943cf51c06aeaf7a7 ]

NVME_CTRL_NEW should never see any I/O, because in order to start
initialization it has to transition to NVME_CTRL_CONNECTING and from
there it will never return to this state.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nvmet-tcp: Fix NULL dereference when a connect data comes in h2cdata pdu

[ Upstream commit a6ce7d7b4adaebc27ee7e78e5ecc378a1cfc221d ]

When handling commands without in-capsule data, we assign the ttag
assuming we already have the queue commands array allocated (based
on the queue size information in the connect data payload). However
if the connect itself did not send the connect data in-capsule we
have yet to allocate the queue commands,and we will assign a bogus
ttag and suffer a NULL dereference when we receive the corresponding
h2cdata pdu.

Fix this by checking if we already allocated commands before
dereferencing it when handling h2cdata, if we didn't, its for sure a
connect and we should use the preallocated connect command.

Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Sasha Levin <sashal@kernel.org>

irqchip/eznps: Fix build error for !ARC700 builds

[ Upstream commit 89d29997f103d08264b0685796b420d911658b96 ]

eznps driver is supposed to be platform independent however it ends up
including stuff from inside arch/arc headers leading to rand config
build errors.

The quick hack to fix this (proper fix is too much chrun for non active
user-base) is to add following to nps platform agnostic header.
 - copy AUX_IENABLE from arch/arc header
 - move CTOP_AUX_IACK from arch/arc/plat-eznps/*/**

Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://lkml.kernel.org/r/20200824095831.5lpkmkafelnvlpi2@linutronix.de
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

xfs: initialize the shortform attr header padding entry

[ Upstream commit 125eac243806e021f33a1fdea3687eccbb9f7636 ]

Don't leak kernel memory contents into the shortform attr fork.

Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cfg80211: Adjust 6 GHz frequency to channel conversion

[ Upstream commit 2d9b55508556ccee6410310fb9ea2482fd3328eb ]

Adjust the 6 GHz frequency to channel conversion function,
the other way around was previously handled.

Signed-off-by: Amar Singhal <asinghal@codeaurora.org>
Link: https://lore.kernel.org/r/1592599921-10607-1-git-send-email-asinghal@codeaurora.org
[rewrite commit message, hard-code channel 2]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drivers/net/wan/lapbether: Set network_header before transmitting

[ Upstream commit 91244d108441013b7367b3b4dcc6869998676473 ]

Set the skb's network_header before it is passed to the underlying
Ethernet device for transmission.

This patch fixes the following issue:

When we use this driver with AF_PACKET sockets, there would be error
messages of:
   protocol 0805 is buggy, dev (Ethernet interface name)
printed in the system "dmesg" log.

This is because skbs passed down to the Ethernet device for transmission
don't have their network_header properly set, and the dev_queue_xmit_nit
function in net/core/dev.c complains about this.

Reason of setting the network_header to this place (at the end of the
Ethernet header, and at the beginning of the Ethernet payload):

Because when this driver receives an skb from the Ethernet device, the
network_header is also set at this place.

Cc: Martin Schiller <ms@dev.tdt.de>
Signed-off-by: Xie He <xie.he.0141@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

xfs: fix off-by-one in inode alloc block reservation calculation

[ Upstream commit 657f101930bc6c5b41bd7d6c22565c4302a80d33 ]

The inode chunk allocation transaction reserves inobt_maxlevels-1
blocks to accommodate a full split of the inode btree. A full split
requires an allocation for every existing level and a new root
block, which means inobt_maxlevels is the worst case block
requirement for a transaction that inserts to the inobt. This can
lead to a transaction block reservation overrun when tmpfile
creation allocates an inode chunk and expands the inobt to its
maximum depth. This problem has been observed in conjunction with
overlayfs, which makes frequent use of tmpfiles internally.

The existing reservation code goes back as far as the Linux git repo
history (v2.6.12). It was likely never observed as a problem because
the traditional file/directory creation transactions also include
worst case block reservation for directory modifications, which most
likely is able to make up for a single block deficiency in the inode
allocation portion of the calculation. tmpfile support is relatively
more recent (v3.15), less heavily used, and only includes the inode
allocation block reservation as tmpfiles aren't linked into the
directory tree on creation.

Fix up the inode alloc block reservation macro and a couple of the
block allocator minleft parameters that enforce an allocation to
leave enough free blocks in the AG for a full inobt split.

Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: hns3: Fix for geneve tx checksum bug

[ Upstream commit a156998fc92d3859c8e820f1583f6d0541d643c3 ]

when skb->encapsulation is 0, skb->ip_summed is CHECKSUM_PARTIAL
and it is udp packet, which has a dest port as the IANA assigned.
the hardware is expected to do the checksum offload, but the
hardware will not do the checksum offload when udp dest port is
6081.

This patch fixes it by doing the checksum in software.

Reported-by: Li Bing <libing@winhong.com>
Signed-off-by: Yi Li <yili@winhong.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drivers/dma/dma-jz4780: Fix race condition between probe and irq handler

[ Upstream commit 6d6018fc30bee67290dbed2fa51123f7c6f3d691 ]

In probe, IRQ is requested before zchan->id is initialized which can be
read in the irq handler. Hence, shift request irq after other initializations
complete.

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Madhuparna Bhowmik <madhuparnabhowmik10@gmail.com>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20200821034423.12713-1-madhuparnabhowmik10@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: hda/tegra: Program WAKEEN register for Tegra

[ Upstream commit 23d63a31d9f44d7daeac0d1fb65c6a73c70e5216 ]

The WAKEEN bits are used to indicate which bits in the
STATESTS register may cause wake event during the codec
state change request. Configure the WAKEEN register for
the Tegra to detect the wake events.

Signed-off-by: Mohan Kumar <mkumard@nvidia.com>
Acked-by: Sameer Pujar <spujar@nvidia.com>
Link: https://lore.kernel.org/r/20200825052415.20626-3-mkumard@nvidia.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: hda: Fix 2 channel swapping for Tegra

[ Upstream commit 216116eae43963c662eb84729507bad95214ca6b ]

The Tegra HDA codec HW implementation has an issue related to not
swapping the 2 channel Audio Sample Packet(ASP) channel mapping.
Whatever the FL and FR mapping specified the left channel always
comes out of left speaker and right channel on right speaker. So
add condition to disallow the swapping of FL,FR during the playback.

Signed-off-by: Mohan Kumar <mkumard@nvidia.com>
Acked-by: Sameer Pujar <spujar@nvidia.com>
Link: https://lore.kernel.org/r/20200825052415.20626-2-mkumard@nvidia.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

firestream: Fix memleak in fs_open

[ Upstream commit 15ac5cdafb9202424206dc5bd376437a358963f9 ]

When make_rate() fails, vcc should be freed just
like other error paths in fs_open().

Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

NFC: st95hf: Fix memleak in st95hf_in_send_cmd

[ Upstream commit f97c04c316d8fea16dca449fdfbe101fbdfee6a2 ]

When down_killable() fails, skb_resp should be freed
just like when st95hf_spi_send() fails.

Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drivers/net/wan/lapbether: Added needed_tailroom

[ Upstream commit 1ee39c1448c4e0d480c5b390e2db1987561fb5c2 ]

The underlying Ethernet device may request necessary tailroom to be
allocated by setting needed_tailroom. This driver should also set
needed_tailroom to request the tailroom needed by the underlying
Ethernet device to be allocated.

Cc: Willem de Bruijn <willemdebruijn.kernel@gmail.com>
Cc: Martin Schiller <ms@dev.tdt.de>
Signed-off-by: Xie He <xie.he.0141@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfilter: conntrack: allow sctp hearbeat after connection re-use

[ Upstream commit cc5453a5b7e90c39f713091a7ebc53c1f87d1700 ]

If an sctp connection gets re-used, heartbeats are flagged as invalid
because their vtag doesn't match.

Handle this in a similar way as TCP conntrack when it suspects that the
endpoints and conntrack are out-of-sync.

When a HEARTBEAT request fails its vtag validation, flag this in the
conntrack state and accept the packet.

When a HEARTBEAT_ACK is received with an invalid vtag in the reverse
direction after we allowed such a HEARTBEAT through, assume we are
out-of-sync and re-set the vtag info.

v2: remove left-over snippet from an older incarnation that moved
    new_state/old_state assignments, thats not needed so keep that
    as-is.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dmaengine: acpi: Put the CSRT table after using it

[ Upstream commit 7eb48dd094de5fe0e216b550e73aa85257903973 ]

The acpi_get_table() should be coupled with acpi_put_table() if
the mapped table is not used at runtime to release the table
mapping, put the CSRT table buf after using it.

Signed-off-by: Hanjun Guo <guohanjun@huawei.com>
Link: https://lore.kernel.org/r/1595411661-15936-1-git-send-email-guohanjun@huawei.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARC: HSDK: wireup perf irq

[ Upstream commit fe81d927b78c4f0557836661d32e41ebc957b024 ]

Newer version of HSDK aka HSDK-4xD (with dual issue HS48x4 CPU) wired up
the perf interrupt, so enable that in DT.
This is OK for old HSDK where this irq is ignored because pct irq is not
wired up in hardware.

Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: ns2: Fixed QSPI compatible string

[ Upstream commit 686e0a0c8c61e0e3f55321d0181fece3efd92777 ]

The string was incorrectly defined before from least to most specific,
swap the compatible strings accordingly.

Fixes: ff73917d38a6 ("ARM64: dts: Add QSPI Device Tree node for NS2")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: BCM5301X: Fixed QSPI compatible string

[ Upstream commit b793dab8d811e103665d6bddaaea1c25db3776eb ]

The string was incorrectly defined before from least to most
specific, swap the compatible strings accordingly.

Fixes: 1c8f40650723 ("ARM: dts: BCM5301X: convert to iProc QSPI")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: NSP: Fixed QSPI compatible string

[ Upstream commit d1ecc40a954fd0f5e3789b91fa80f15e82284e39 ]

The string was incorrectly defined before from least to most
specific, swap the compatible strings accordingly.

Fixes: 329f98c1974e ("ARM: dts: NSP: Add QSPI nodes to NSPI and bcm958625k DTSes")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: bcm: HR2: Fixed QSPI compatible string

[ Upstream commit d663186293a818af97c648624bee6c7a59e8218b ]

The string was incorrectly defined before from least to most specific,
swap the compatible strings accordingly.

Fixes: b9099ec754b5 ("ARM: dts: Add Broadcom Hurricane 2 DTS include file")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

IB/isert: Fix unaligned immediate-data handling

[ Upstream commit 0b089c1ef7047652b13b4cdfdb1e0e7dbdb8c9ab ]

Currently we allocate rx buffers in a single contiguous buffers for
headers (iser and iscsi) and data trailer. This means that most likely the
data starting offset is aligned to 76 bytes (size of both headers).

This worked fine for years, but at some point this broke, resulting in
data corruptions in isert when a command comes with immediate data and the
underlying backend device assumes 512 bytes buffer alignment.

We assume a hard-requirement for all direct I/O buffers to be 512 bytes
aligned. To fix this, we should avoid passing unaligned buffers for I/O.

Instead, we allocate our recv buffers with some extra space such that we
can have the data portion align to 512 byte boundary. This also means that
we cannot reference headers or data using structure but rather
accessors (as they may move based on alignment). Also, get rid of the
wrong __packed annotation from iser_rx_desc as this has only harmful
effects (not aligned to anything).

This affects the rx descriptors for iscsi login and data plane.

Fixes: 3d75ca0adef4 ("block: introduce multi-page bvec helpers")
Link: https://lore.kernel.org/r/20200904195039.31687-1-sagi@grimberg.me
Reported-by: Stephen Rust <srust@blockbridge.com>
Tested-by: Doug Dumitru <doug@dumitru.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

block: Set same_page to false in __bio_try_merge_page if ret is false

[ Upstream commit 2cd896a5e86fc326bda8614b96c0401dcc145868 ]

If we hit the UINT_MAX limit of bio->bi_iter.bi_size and so we are anyway
not merging this page in this bio, then it make sense to make same_page
also as false before returning.

Without this patch, we hit below WARNING in iomap.
This mostly happens with very large memory system and / or after tweaking
vm dirty threshold params to delay writeback of dirty data.

WARNING: CPU: 18 PID: 5130 at fs/iomap/buffered-io.c:74 iomap_page_release+0x120/0x150
 CPU: 18 PID: 5130 Comm: fio Kdump: loaded Tainted: G        W         5.8.0-rc3 #6
 Call Trace:
  __remove_mapping+0x154/0x320 (unreliable)
  iomap_releasepage+0x80/0x180
  try_to_release_page+0x94/0xe0
  invalidate_inode_page+0xc8/0x110
  invalidate_mapping_pages+0x1dc/0x540
  generic_fadvise+0x3c8/0x450
  xfs_file_fadvise+0x2c/0xe0 [xfs]
  vfs_fadvise+0x3c/0x60
  ksys_fadvise64_64+0x68/0xe0
  sys_fadvise64+0x28/0x40
  system_call_exception+0xf8/0x1c0
  system_call_common+0xf0/0x278

Fixes: cc90bc68422 ("block: fix "check bi_size overflow before merge"")
Reported-by: Shivaprasad G Bhat <sbhat@linux.ibm.com>
Suggested-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Anju T Sudhakar <anju@linux.vnet.ibm.com>
Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

spi: stm32: fix pm_runtime_get_sync() error checking

[ Upstream commit c170a5a3b6944ad8e76547c4a1d9fe81c8f23ac8 ]

The pm_runtime_get_sync() can return either 0 or 1 on success but this
code treats 1 as a failure.

Fixes: db96bf976a4f ("spi: stm32: fixes suspend/resume management")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Alain Volmat <alain.volmat@st.com>
Link: https://lore.kernel.org/r/20200909094304.GA420136@mwanda
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nvme-fabrics: allow to queue requests for live queues

[ Upstream commit 73a5379937ec89b91e907bb315e2434ee9696a2c ]

Right now we are failing requests based on the controller state (which
is checked inline in nvmf_check_ready) however we should definitely
accept requests if the queue is live.

When entering controller reset, we transition the controller into
NVME_CTRL_RESETTING, and then return BLK_STS_RESOURCE for non-mpath
requests (have blk_noretry_request set).

This is also the case for NVME_REQ_USER for the wrong reason. There
shouldn't be any reason for us to reject this I/O in a controller reset.
We do want to prevent passthru commands on the admin queue because we
need the controller to fully initialize first before we let user passthru
admin commands to be issued.

In a non-mpath setup, this means that the requests will simply be
requeued over and over forever not allowing the q_usage_counter to drop
its final reference, causing controller reset to hang if running
concurrently with heavy I/O.

Fixes: 35897b920c8a ("nvme-fabrics: fix and refine state checks in __nvmf_check_ready")
Reviewed-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

spi: stm32: Rate-limit the 'Communication suspended' message

[ Upstream commit ea8be08cc9358f811e4175ba7fa7fea23c5d393e ]

The 'spi_stm32 44004000.spi: Communication suspended' message means that
when using PIO, the kernel did not read the FIFO fast enough and so the
SPI controller paused the transfer. Currently, this is printed on every
single such event, so if the kernel is busy and the controller is pausing
the transfers often, the kernel will be all the more busy scrolling this
message into the log buffer every few milliseconds. That is not helpful.

Instead, rate-limit the message and print it every once in a while. It is
not possible to use the default dev_warn_ratelimited(), because that is
still too verbose, as it prints 10 lines (DEFAULT_RATELIMIT_BURST) every
5 seconds (DEFAULT_RATELIMIT_INTERVAL). The policy here is to print 1 line
every 50 seconds (DEFAULT_RATELIMIT_INTERVAL * 10), because 1 line is more
than enough and the cycles saved on printing are better left to the CPU to
handle the SPI. However, dev_warn_once() is also not useful, as the user
should be aware that this condition is possibly recurring or ongoing. Thus
the custom rate-limit policy.

Finally, turn the message from dev_warn() to dev_dbg(), since the system
does not suffer any sort of malfunction if this message appears, it is
just slowing down. This further reduces the printing into the log buffer
and frees the CPU to do useful work.

Fixes: dcbe0d84dfa5 ("spi: add driver for STM32 SPI controller")
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: Amelie Delaunay <amelie.delaunay@st.com>
Cc: Antonio Borneo <borneo.antonio@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20200905151913.117775-1-marex@denx.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mmc: sdhci-msm: Add retries when all tuning phases are found valid

[ Upstream commit 9d5dcefb7b114d610aeb2371f6a6f119af316e43 ]

As the comments in this patch say, if we tune and find all phases are
valid it's _almost_ as bad as no phases being found valid.  Probably
all phases are not really reliable but we didn't detect where the
unreliable place is.  That means we'll essentially be guessing and
hoping we get a good phase.

This is not just a problem in theory.  It was causing real problems on
a real board.  On that board, most often phase 10 is found as the only
invalid phase, though sometimes 10 and 11 are invalid and sometimes
just 11.  Some percentage of the time, however, all phases are found
to be valid.  When this happens, the current logic will decide to use
phase 11.  Since phase 11 is sometimes found to be invalid, this is a
bad choice.  Sure enough, when phase 11 is picked we often get mmc
errors later in boot.

I have seen cases where all phases were found to be valid 3 times in a
row, so increase the retry count to 10 just to be extra sure.

Fixes: 415b5a75da43 ("mmc: sdhci-msm: Add platform_execute_tuning implementation")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Veerabhadrarao Badiganti <vbadigan@codeaurora.org>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20200827075809.1.If179abf5ecb67c963494db79c3bc4247d987419b@changeid
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mmc: sdhci-acpi: Clear amd_sdhci_host on reset

[ Upstream commit 2cf9bfe9be75ed3656bbf882fb70c3e3047866e4 ]

The commit 61d7437ed1390 ("mmc: sdhci-acpi: Fix HS400 tuning for AMDI0040")
broke resume for eMMC HS400. When the system suspends the eMMC controller
is powered down. So, on resume we need to reinitialize the controller.
Although, amd_sdhci_host was not getting cleared, so the DLL was never
re-enabled on resume. This results in HS400 being non-functional.

To fix the problem, this change clears the tuned_clock flag, clears the
dll_enabled flag and disables the DLL on reset.

Fixes: 61d7437ed1390 ("mmc: sdhci-acpi: Fix HS400 tuning for AMDI0040")
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20200831150517.1.I93c78bfc6575771bb653c9d3fca5eb018a08417d@changeid
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/sun4i: backend: Disable alpha on the lowest plane on the A20

[ Upstream commit 5e2e2600a3744491a8b49b92597c13b693692082 ]

Unlike we previously thought, the per-pixel alpha is just as broken on the
A20 as it is on the A10. Remove the quirk that says we can use it.

Fixes: dcf496a6a608 ("drm/sun4i: sun4i: Introduce a quirk for lowest plane alpha support")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Cc: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200728134810.883457-2-maxime@cerno.tech
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/sun4i: backend: Support alpha property on lowest plane

[ Upstream commit e359c70462d2a82aae80274d027351d38792dde6 ]

Unlike what we previously thought, only the per-pixel alpha is broken on
the lowest plane and the per-plane alpha isn't. Remove the check on the
alpha property being set on the lowest plane to reject a mode.

Fixes: dcf496a6a608 ("drm/sun4i: sun4i: Introduce a quirk for lowest plane alpha support")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Cc: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200728134810.883457-1-maxime@cerno.tech
Signed-off-by: Sasha Levin <sashal@kernel.org>

soundwire: fix double free of dangling pointer

[ Upstream commit 3fbbf2148a406b3e350fe91e6fdd78eb42ecad24 ]

clang static analysis flags this problem

stream.c:844:9: warning: Use of memory after
  it is freed
        kfree(bus->defer_msg.msg->buf);
              ^~~~~~~~~~~~~~~~~~~~~~~

This happens in an error handler cleaning up memory
allocated for elements in a list.

list_for_each_entry(m_rt, &stream->master_list, stream_node) {
bus = m_rt->bus;

kfree(bus->defer_msg.msg->buf);
kfree(bus->defer_msg.msg);
}

And is triggered when the call to sdw_bank_switch() fails.
There are a two problems.

First, when sdw_bank_switch() fails, though it frees memory it
does not clear bus's reference 'defer_msg.msg' to that memory.

The second problem is the freeing msg->buf. In some cases
msg will be NULL so this will dereference a null pointer.
Need to check before freeing.

Fixes: 99b8a5d608a6 ("soundwire: Add bank switch routine")
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200902202650.14189-1-trix@redhat.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: mpt3sas: Don't call disable_irq from IRQ poll handler

[ Upstream commit b614d55b970d08bcac5b0bc15a5526181b3e4459 ]

disable_irq() might sleep, replace it with disable_irq_nosync(). For
synchronisation 'irq_poll_scheduled' is sufficient

Fixes: 320e77acb3 scsi: mpt3sas: Irq poll to avoid CPU hard lockups
Link: https://lore.kernel.org/r/20200901145026.12174-1-thenzl@redhat.com
Signed-off-by: Tomas Henzl <thenzl@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: megaraid_sas: Don't call disable_irq from process IRQ poll

[ Upstream commit d2af39141eea34ef651961e885f49d96781a1016 ]

disable_irq() might sleep. Replace it with disable_irq_nosync() which is
sufficient as irq_poll_scheduled protects against concurrently running
complete_cmd_fusion() from megasas_irqpoll() and megasas_isr_fusion().

Link: https://lore.kernel.org/r/20200827165332.8432-1-thenzl@redhat.com
Fixes: a6ffd5bf681 scsi: megaraid_sas: Call disable_irq from process IRQ poll
Signed-off-by: Tomas Henzl <thenzl@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/core: Fix reported speed and width

[ Upstream commit 28b0865714b315e318ac45c4fc9156f3d4649646 ]

When the returned speed from __ethtool_get_link_ksettings() is
SPEED_UNKNOWN this will lead to reporting a wrong speed and width for
providers that uses ib_get_eth_speed(), fix that by defaulting the
netdev_speed to SPEED_1000 in case the returned value from
__ethtool_get_link_ksettings() is SPEED_UNKNOWN.

Fixes: d41861942fc5 ("IB/core: Add generic function to extract IB speed from netdev")
Link: https://lore.kernel.org/r/20200902124304.170912-1-kamalheib1@gmail.com
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: libsas: Set data_dir as DMA_NONE if libata marks qc as NODATA

[ Upstream commit 53de092f47ff40e8d4d78d590d95819d391bf2e0 ]

It was discovered that sdparm will fail when attempting to disable write
cache on a SATA disk connected via libsas.

In the ATA command set the write cache state is controlled through the SET
FEATURES operation. This is roughly corresponds to MODE SELECT in SCSI and
the latter command is what is used in the SCSI-ATA translation layer. A
subtle difference is that a MODE SELECT carries data whereas SET FEATURES
is defined as a non-data command in ATA.

Set the DMA data direction to DMA_NONE if the requested ATA command is
identified as non-data.

[mkp: commit desc]

Fixes: fa1c1e8f1ece ("[SCSI] Add SATA support to libsas")
Link: https://lore.kernel.org/r/1598426666-54544-1-git-send-email-luojiaxing@huawei.com
Reviewed-by: John Garry <john.garry@huawei.com>
Reviewed-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iio: adc: mcp3422: fix locking scope

commit 3f1093d83d7164e4705e4232ccf76da54adfda85 upstream.

Locking should be held for the entire reading sequence involving setting
the channel, waiting for the channel switch and reading from the
channel.
If not, reading from a channel can result mixing with the reading from
another channel.

Fixes: 07914c84ba30 ("iio: adc: Add driver for Microchip MCP3422/3/4 high resolution ADC")
Signed-off-by: Angelo Compagnucci <angelo.compagnucci@gmail.com>
Link: https://lore.kernel.org/r/20200819075525.1395248-1-angelo.compagnucci@gmail.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: adc: mcp3422: fix locking on error path

[ Upstream commit a139ffa40f0c24b753838b8ef3dcf6ad10eb7854 ]

Reading from the chip should be unlocked on error path else the lock
could never being released.

Fixes: 07914c84ba30 ("iio: adc: Add driver for Microchip MCP3422/3/4 high resolution ADC")
Fixes: 3f1093d83d71 ("iio: adc: mcp3422: fix locking scope")
Acked-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Signed-off-by: Angelo Compagnucci <angelo.compagnucci@gmail.com>
Link: https://lore.kernel.org/r/20200901093218.1500845-1-angelo.compagnucci@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/sun4i: Fix dsi dcs long write function

[ Upstream commit fd90e3808fd2c207560270c39b86b71af2231aa1 ]

It's writing too much data. regmap_bulk_write expects number of
register sized chunks to write, not a byte sized length of the
bounce buffer. Bounce buffer needs to be padded too, so that
regmap_bulk_write will not read past the end of the buffer.

Fixes: 133add5b5ad4 ("drm/sun4i: Add Allwinner A31 MIPI-DSI controller support")
Signed-off-by: Ondrej Jirman <megous@megous.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Jernej Skrabec <jernej.skrabec@siol.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20200828125032.937148-1-megous@megous.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: imx8mq: Fix TMU interrupt property

[ Upstream commit 1f2f98f2703e8134678fe20982886085631eda23 ]

"interrupt" is not a valid property.  Using proper name fixes dtbs_check
warning:

  arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-zest.dt.yaml: tmu@30260000: 'interrupts' is a required property

Fixes: e464fd2ba4d4 ("arm64: dts: imx8mq: enable the multi sensor TMU")
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/sun4i: add missing put_device() call in sun8i_r40_tcon_tv_set_mux()

[ Upstream commit 07b5b12d97dc9f47ff3dff46c4f944a15bd762e5 ]

If sun8i_r40_tcon_tv_set_mux() succeed, sun8i_r40_tcon_tv_set_mux()
doesn't have a corresponding put_device(). Thus add put_device()
to fix the exception handling for this function implementation.

Fixes: 0305189afb32 ("drm/sun4i: tcon: Add support for R40 TCON")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20200826010826.1785487-1-yukuai3@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/bnxt_re: Do not report transparent vlan from QP1

[ Upstream commit 2d0e60ee322d512fa6bc62d23a6760b39a380847 ]

QP1 Rx CQE reports transparent VLAN ID in the completion and this is used
while reporting the completion for received MAD packet. Check if the vlan
id is configured before reporting it in the work completion.

Fixes: 84511455ac5b ("RDMA/bnxt_re: report vlan_id and sl in qp1 recv completion")
Link: https://lore.kernel.org/r/1598292876-26529-3-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/rxe: Fix panic when calling kmem_cache_create()

[ Upstream commit d862060a4b43479887ae8e2c0b74a58c4e27e5f3 ]

To avoid the following kernel panic when calling kmem_cache_create() with
a NULL pointer from pool_cache(), Block the rxe_param_set_add() from
running if the rdma_rxe module is not initialized.

 BUG: unable to handle kernel NULL pointer dereference at 000000000000000b
 PGD 0 P4D 0
 Oops: 0000 [#1] SMP NOPTI
 CPU: 4 PID: 8512 Comm: modprobe Kdump: loaded Not tainted 4.18.0-231.el8.x86_64 #1
 Hardware name: HPE ProLiant DL385 Gen10/ProLiant DL385 Gen10, BIOS A40 10/02/2018
 RIP: 0010:kmem_cache_alloc+0xd1/0x1b0
 Code: 8b 57 18 45 8b 77 1c 48 8b 5c 24 30 0f 1f 44 00 00 5b 48 89 e8 5d 41 5c 41 5d 41 5e 41 5f c3 81 e3 00 00 10 00 75 0e 4d 89 fe <41> f6 47 0b 04 0f 84 6c ff ff ff 4c 89 ff e8 cc da 01 00 49 89 c6
 RSP: 0018:ffffa2b8c773f9d0 EFLAGS: 00010246
 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000005
 RDX: 0000000000000004 RSI: 00000000006080c0 RDI: 0000000000000000
 RBP: ffff8ea0a8634fd0 R08: ffffa2b8c773f988 R09: 00000000006000c0
 R10: 0000000000000000 R11: 0000000000000230 R12: 00000000006080c0
 R13: ffffffffc0a97fc8 R14: 0000000000000000 R15: 0000000000000000
 FS:  00007f9138ed9740(0000) GS:ffff8ea4ae800000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 000000000000000b CR3: 000000046d59a000 CR4: 00000000003406e0
 Call Trace:
  rxe_alloc+0xc8/0x160 [rdma_rxe]
  rxe_get_dma_mr+0x25/0xb0 [rdma_rxe]
  __ib_alloc_pd+0xcb/0x160 [ib_core]
  ib_mad_init_device+0x296/0x8b0 [ib_core]
  add_client_context+0x11a/0x160 [ib_core]
  enable_device_and_get+0xdc/0x1d0 [ib_core]
  ib_register_device+0x572/0x6b0 [ib_core]
  ? crypto_create_tfm+0x32/0xe0
  ? crypto_create_tfm+0x7a/0xe0
  ? crypto_alloc_tfm+0x58/0xf0
  rxe_register_device+0x19d/0x1c0 [rdma_rxe]
  rxe_net_add+0x3d/0x70 [rdma_rxe]
  ? dev_get_by_name_rcu+0x73/0x90
  rxe_param_set_add+0xaf/0xc0 [rdma_rxe]
  parse_args+0x179/0x370
  ? ref_module+0x1b0/0x1b0
  load_module+0x135e/0x17e0
  ? ref_module+0x1b0/0x1b0
  ? __do_sys_init_module+0x13b/0x180
  __do_sys_init_module+0x13b/0x180
  do_syscall_64+0x5b/0x1a0
  entry_SYSCALL_64_after_hwframe+0x65/0xca
 RIP: 0033:0x7f9137ed296e

This can be triggered if a user tries to use the 'module option' which is
not actually a real module option but some idiotic (and thankfully no
obsolete) sysfs interface.

Fixes: 8700e3e7c485 ("Soft RoCE driver")
Link: https://lore.kernel.org/r/20200825151725.254046-1-kamalheib1@gmail.com
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/rxe: Drop pointless checks in rxe_init_ports

[ Upstream commit 6112ef62826e91afbae5446d5d47b38e25f47e3f ]

Both pkey_tbl_len and gid_tbl_len are set in rxe_init_port_param() - so no
need to check if they aren't set.

Fixes: 8700e3e7c485 ("Soft RoCE driver")
Link: https://lore.kernel.org/r/20200705104313.283034-2-kamalheib1@gmail.com
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/rxe: Fix memleak in rxe_mem_init_user

[ Upstream commit e3ddd6067ee62f6e76ebcf61ff08b2c729ae412b ]

When page_address() fails, umem should be freed just like when
rxe_mem_alloc() fails.

Fixes: 8700e3e7c485 ("Soft RoCE driver")
Link: https://lore.kernel.org/r/20200819075632.22285-1-dinghao.liu@zju.edu.cn
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: imx7ulp: Correct gpio ranges

[ Upstream commit deb6323b739c54e1a1e83cd3a2bae4901e3eebf6 ]

Correct gpio ranges according to i.MX7ULP pinctrl driver:

gpio_ptc: ONLY pin 0~19 are available;
gpio_ptd: ONLY pin 0~11 are available;
gpio_pte: ONLY pin 0~15 are available;
gpio_ptf: ONLY pin 0~19 are available;

Fixes: 20434dc92c05 ("ARM: dts: imx: add common imx7ulp dtsi support")
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: ls1021a: fix QuadSPI-memory reg range

[ Upstream commit 81dbbb417da4d1ac407dca5b434d39d5b6b91ef3 ]

According to the Reference Manual, the correct size is 512 MiB.

Without this fix, probing the QSPI fails:

    fsl-quadspi 1550000.spi: ioremap failed for resource
        [mem 0x40000000-0x7fffffff]
    fsl-quadspi 1550000.spi: Freescale QuadSPI probe failed
    fsl-quadspi: probe of 1550000.spi failed with error -12

Fixes: 85f8ee78ab72 ("ARM: dts: ls1021a: Add support for QSPI with ls1021a SoC")
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests/timers: Turn off timeout setting

[ Upstream commit 5c1e4f7e9e49b6925b1fb5c507d2c614f3edb292 ]

The following 4 tests in timers can take longer than the default 45
seconds that added in commit 852c8cbf34d3 ("selftests/kselftest/runner.sh:
Add 45 second timeout per test") to run:
  * nsleep-lat - 2m7.350s
  * set-timer-lat - 2m0.66s
  * inconsistency-check - 1m45.074s
  * raw_skew - 2m0.013s

Thus they will be marked as failed with the current 45s setting:
  not ok 3 selftests: timers: nsleep-lat # TIMEOUT
  not ok 4 selftests: timers: set-timer-lat # TIMEOUT
  not ok 6 selftests: timers: inconsistency-check # TIMEOUT
  not ok 7 selftests: timers: raw_skew # TIMEOUT

Disable the timeout setting for timers can make these tests finish
properly:
  ok 3 selftests: timers: nsleep-lat
  ok 4 selftests: timers: set-timer-lat
  ok 6 selftests: timers: inconsistency-check
  ok 7 selftests: timers: raw_skew

https://bugs.launchpad.net/bugs/1864626
Fixes: 852c8cbf34d3 ("selftests/kselftest/runner.sh: Add 45 second timeout per test")
Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com>
Acked-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: socfpga: fix register entry for timer3 on Arria10

[ Upstream commit 0ff5a4812be4ebd4782bbb555d369636eea164f7 ]

Fixes the register address for the timer3 entry on Arria10.

Fixes: 475dc86d08de4 ("arm: dts: socfpga: Add a base DTSI for Altera's Arria10 SOC")
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

regulator: remove superfluous lock in regulator_resolve_coupling()

[ Upstream commit a577f3456c0a2fac3dee037c483753e6e68f3e49 ]

The code modifies rdev, but locks c_rdev instead. Remove the lock
as this is held together by regulator_list_mutex taken in the caller.

Fixes: f9503385b187 ("regulator: core: Mutually resolve regulators coupling")
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/25eb81cefb37a646f3e44eaaf1d8ae8881cfde52.1597195321.git.mirq-linux@rere.qmqm.pl
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

regulator: push allocation in regulator_ena_gpio_request() out of lock

[ Upstream commit 467bf30142c64f2eb64e2ac67fa4595126230efd ]

Move another allocation out of regulator_list_mutex-protected region, as
reclaim might want to take the same lock.

WARNING: possible circular locking dependency detected
5.7.13+ #534 Not tainted
------------------------------------------------------
kswapd0/383 is trying to acquire lock:
c0e5d920 (regulator_list_mutex){+.+.}-{3:3}, at: regulator_lock_dependent+0x54/0x2c0

but task is already holding lock:
c0e38518 (fs_reclaim){+.+.}-{0:0}, at: __fs_reclaim_acquire+0x0/0x50

which lock already depends on the new lock.

the existing dependency chain (in reverse order) is:

-> #1 (fs_reclaim){+.+.}-{0:0}:
       fs_reclaim_acquire.part.11+0x40/0x50
       fs_reclaim_acquire+0x24/0x28
       kmem_cache_alloc_trace+0x40/0x1e8
       regulator_register+0x384/0x1630
       devm_regulator_register+0x50/0x84
       reg_fixed_voltage_probe+0x248/0x35c
[...]
other info that might help us debug this:

 Possible unsafe locking scenario:

       CPU0                    CPU1
       ----                    ----
  lock(fs_reclaim);
                               lock(regulator_list_mutex);
                               lock(fs_reclaim);
  lock(regulator_list_mutex);

 *** DEADLOCK ***
[...]
2 locks held by kswapd0/383:
 #0: c0e38518 (fs_reclaim){+.+.}-{0:0}, at: __fs_reclaim_acquire+0x0/0x50
 #1: cb70e5e0 (hctx->srcu){....}-{0:0}, at: hctx_lock+0x60/0xb8
[...]

Fixes: 541d052d7215 ("regulator: core: Only support passing enable GPIO descriptors")
[this commit only changes context]
Fixes: f8702f9e4aa7 ("regulator: core: Use ww_mutex for regulators locking")
[this is when the regulator_list_mutex was introduced in reclaim locking path]

Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Link: https://lore.kernel.org/r/41fe6a9670335721b48e8f5195038c3d67a3bf92.1597195321.git.mirq-linux@rere.qmqm.pl
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: logicpd-som-lv-baseboard: Fix missing video

[ Upstream commit d1db7b80a6c8c5f81db0e80664d29b374750e2c6 ]

A previous commit removed the panel-dpi driver, which made the
SOM-LV video stop working because it relied on the DPI driver
for setting video timings.  Now that the simple-panel driver is
available in omap2plus, this patch migrates the SOM-LV dev kits
to use a similar panel and remove the manual timing requirements.
A similar patch was already done and applied to the Torpedo family.

Fixes: 8bf4b1621178 ("drm/omap: Remove panel-dpi driver")
Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: logicpd-som-lv-baseboard: Fix broken audio

[ Upstream commit 4d26e9a028e3d88223e06fa133c3d55af7ddbceb ]

Older versions of U-Boot would pinmux the whole board, but as
the bootloader got updated, it started to only pinmux the pins
it needed, and expected Linux to configure what it needed.

Unfortunately this caused an issue with the audio, because the
mcbsp2 pins were configured in the device tree but never
referenced by the driver. When U-Boot stopped muxing the audio
pins, the audio died.

This patch adds the references to the associate the pin controller
with the mcbsp2 driver which makes audio operate again.

Fixes: 5cb8b0fa55a9 ("ARM: dts: Move most of logicpd-som-lv-37xx-devkit.dts to logicpd-som-lv-baseboard.dtsi")
Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: logicpd-torpedo-baseboard: Fix broken audio

[ Upstream commit d7dfee67688ac7f2dfd4c3bc70c053ee990c40b5 ]

Older versions of U-Boot would pinmux the whole board, but as
the bootloader got updated, it started to only pinmux the pins
it needed, and expected Linux to configure what it needed.

Unfortunately this caused an issue with the audio, because the
mcbsp2 pins were configured in the device tree, they were never
referenced by the driver. When U-Boot stopped muxing the audio
pins, the audio died.

This patch adds the references to the associate the pin controller
with the mcbsp2 driver which makes audio operate again.

Fixes: 739f85bba5ab ("ARM: dts: Move most of logicpd-torpedo-37xx-devkit to logicpd-torpedo-baseboard")
Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Linux 5.4.65

Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: disable netpoll on fresh napis

[ Upstream commit 96e97bc07e90f175a8980a22827faf702ca4cb30 ]

napi_disable() makes sure to set the NAPI_STATE_NPSVC bit to prevent
netpoll from accessing rings before init is complete. However, the
same is not done for fresh napi instances in netif_napi_add(),
even though we expect NAPI instances to be added as disabled.

This causes crashes during driver reconfiguration (enabling XDP,
changing the channel count) - if there is any printk() after
netif_napi_add() but before napi_enable().

To ensure memory ordering is correct we need to use RCU accessors.

Reported-by: Rob Sherwood <rsher@fb.com>
Fixes: 2d8bff12699a ("netpoll: Close race condition between poll_one_napi and napi_disable")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tipc: fix shutdown() of connectionless socket

[ Upstream commit 2a63866c8b51a3f72cea388dfac259d0e14c4ba6 ]

syzbot is reporting hung task at nbd_ioctl() [1], for there are two
problems regarding TIPC's connectionless socket's shutdown() operation.

----------
#include <fcntl.h>
#include <sys/socket.h>
#include <sys/ioctl.h>
#include <linux/nbd.h>
#include <unistd.h>

int main(int argc, char *argv[])
{
        const int fd = open("/dev/nbd0", 3);
        alarm(5);
        ioctl(fd, NBD_SET_SOCK, socket(PF_TIPC, SOCK_DGRAM, 0));
        ioctl(fd, NBD_DO_IT, 0); /* To be interrupted by SIGALRM. */
        return 0;
}
----------

One problem is that wait_for_completion() from flush_workqueue() from
nbd_start_device_ioctl() from nbd_ioctl() cannot be completed when
nbd_start_device_ioctl() received a signal at wait_event_interruptible(),
for tipc_shutdown() from kernel_sock_shutdown(SHUT_RDWR) from
nbd_mark_nsock_dead() from sock_shutdown() from nbd_start_device_ioctl()
is failing to wake up a WQ thread sleeping at wait_woken() from
tipc_wait_for_rcvmsg() from sock_recvmsg() from sock_xmit() from
nbd_read_stat() from recv_work() scheduled by nbd_start_device() from
nbd_start_device_ioctl(). Fix this problem by always invoking
sk->sk_state_change() (like inet_shutdown() does) when tipc_shutdown() is
called.

The other problem is that tipc_wait_for_rcvmsg() cannot return when
tipc_shutdown() is called, for tipc_shutdown() sets sk->sk_shutdown to
SEND_SHUTDOWN (despite "how" is SHUT_RDWR) while tipc_wait_for_rcvmsg()
needs sk->sk_shutdown set to RCV_SHUTDOWN or SHUTDOWN_MASK. Fix this
problem by setting sk->sk_shutdown to SHUTDOWN_MASK (like inet_shutdown()
does) when the socket is connectionless.

[1] https://syzkaller.appspot.com/bug?id=3fe51d307c1f0a845485cf1798aa059d12bf18b2

Reported-by: syzbot <syzbot+e36f41d207137b5d12f7@syzkaller.appspotmail.com>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

taprio: Fix using wrong queues in gate mask

[ Upstream commit 09e31cf0c528dac3358a081dc4e773d1b3de1bc9 ]

Since commit 9c66d1564676 ("taprio: Add support for hardware
offloading") there's a bit of inconsistency when offloading schedules
to the hardware:

In software mode, the gate masks are specified in terms of traffic
classes, so if say "sched-entry S 03 20000", it means that the traffic
classes 0 and 1 are open for 20us; when taprio is offloaded to
hardware, the gate masks are specified in terms of hardware queues.

The idea here is to fix hardware offloading, so schedules in hardware
and software mode have the same behavior. What's needed to do is to
map traffic classes to queues when applying the offload to the driver.

Fixes: 9c66d1564676 ("taprio: Add support for hardware offloading")
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sctp: not disable bh in the whole sctp_get_port_local()

[ Upstream commit 3106ecb43a05dc3e009779764b9da245a5d082de ]

With disabling bh in the whole sctp_get_port_local(), when
snum == 0 and too many ports have been used, the do-while
loop will take the cpu for a long time and cause cpu stuck:

  [ ] watchdog: BUG: soft lockup - CPU#11 stuck for 22s!
  [ ] RIP: 0010:native_queued_spin_lock_slowpath+0x4de/0x940
  [ ] Call Trace:
  [ ]  _raw_spin_lock+0xc1/0xd0
  [ ]  sctp_get_port_local+0x527/0x650 [sctp]
  [ ]  sctp_do_bind+0x208/0x5e0 [sctp]
  [ ]  sctp_autobind+0x165/0x1e0 [sctp]
  [ ]  sctp_connect_new_asoc+0x355/0x480 [sctp]
  [ ]  __sctp_connect+0x360/0xb10 [sctp]

There's no need to disable bh in the whole function of
sctp_get_port_local. So fix this cpu stuck by removing
local_bh_disable() called at the beginning, and using
spin_lock_bh() instead.

The same thing was actually done for inet_csk_get_port() in
Commit ea8add2b1903 ("tcp/dccp: better use of ephemeral
ports in bind()").

Thanks to Marcelo for pointing the buggy code out.

v1->v2:
  - use cond_resched() to yield cpu to other tasks if needed,
    as Eric noticed.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: Ying Xu <yinxu@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: usb: dm9601: Add USB ID of Keenetic Plus DSL

[ Upstream commit a609d0259183a841621f252e067f40f8cc25d6f6 ]

Keenetic Plus DSL is a xDSL modem that uses dm9620 as its USB interface.

Signed-off-by: Kamil Lorenc <kamil@re-ws.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netlabel: fix problems with mapping removal

[ Upstream commit d3b990b7f327e2afa98006e7666fb8ada8ed8683 ]

This patch fixes two main problems seen when removing NetLabel
mappings: memory leaks and potentially extra audit noise.

The memory leaks are caused by not properly free'ing the mapping's
address selector struct when free'ing the entire entry as well as
not properly cleaning up a temporary mapping entry when adding new
address selectors to an existing entry.  This patch fixes both these
problems such that kmemleak reports no NetLabel associated leaks
after running the SELinux test suite.

The potentially extra audit noise was caused by the auditing code in
netlbl_domhsh_remove_entry() being called regardless of the entry's
validity.  If another thread had already marked the entry as invalid,
but not removed/free'd it from the list of mappings, then it was
possible that an additional mapping removal audit record would be
generated.  This patch fixes this by returning early from the removal
function when the entry was previously marked invalid.  This change
also had the side benefit of improving the code by decreasing the
indentation level of large chunk of code by one (accounting for most
of the diffstat).

Fixes: 63c416887437 ("netlabel: Add network address selectors to the NetLabel/LSM domain mapping")
Reported-by: Stephen Smalley <stephen.smalley.work@gmail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipv6: Fix sysctl max for fib_multipath_hash_policy

[ Upstream commit 05d4487197b2b71d5363623c28924fd58c71c0b6 ]

Cited commit added the possible value of '2', but it cannot be set. Fix
it by adjusting the maximum value to '2'. This is consistent with the
corresponding IPv4 sysctl.

Before:

# sysctl -w net.ipv6.fib_multipath_hash_policy=2
sysctl: setting key "net.ipv6.fib_multipath_hash_policy": Invalid argument
net.ipv6.fib_multipath_hash_policy = 2
# sysctl net.ipv6.fib_multipath_hash_policy
net.ipv6.fib_multipath_hash_policy = 0

After:

# sysctl -w net.ipv6.fib_multipath_hash_policy=2
net.ipv6.fib_multipath_hash_policy = 2
# sysctl net.ipv6.fib_multipath_hash_policy
net.ipv6.fib_multipath_hash_policy = 2

Fixes: d8f74f0975d8 ("ipv6: Support multipath hashing on inner IP pkts")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Stephen Suryaputra <ssuryaextr@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipv4: Silence suspicious RCU usage warning

[ Upstream commit 7f6f32bb7d3355cd78ebf1dece9a6ea7a0ca8158 ]

fib_info_notify_update() is always called with RTNL held, but not from
an RCU read-side critical section. This leads to the following warning
[1] when the FIB table list is traversed with
hlist_for_each_entry_rcu(), but without a proper lockdep expression.

Since modification of the list is protected by RTNL, silence the warning
by adding a lockdep expression which verifies RTNL is held.

[1]
 =============================
 WARNING: suspicious RCU usage
 5.9.0-rc1-custom-14233-g2f26e122d62f #129 Not tainted
 -----------------------------
 net/ipv4/fib_trie.c:2124 RCU-list traversed in non-reader section!!

 other info that might help us debug this:

 rcu_scheduler_active = 2, debug_locks = 1
 1 lock held by ip/834:
  #0: ffffffff85a3b6b0 (rtnl_mutex){+.+.}-{3:3}, at: rtnetlink_rcv_msg+0x49a/0xbd0

 stack backtrace:
 CPU: 0 PID: 834 Comm: ip Not tainted 5.9.0-rc1-custom-14233-g2f26e122d62f #129
 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-2.fc32 04/01/2014
 Call Trace:
  dump_stack+0x100/0x184
  lockdep_rcu_suspicious+0x143/0x14d
  fib_info_notify_update+0x8d1/0xa60
  __nexthop_replace_notify+0xd2/0x290
  rtm_new_nexthop+0x35e2/0x5946
  rtnetlink_rcv_msg+0x4f7/0xbd0
  netlink_rcv_skb+0x17a/0x480
  rtnetlink_rcv+0x22/0x30
  netlink_unicast+0x5ae/0x890
  netlink_sendmsg+0x98a/0xf40
  ____sys_sendmsg+0x879/0xa00
  ___sys_sendmsg+0x122/0x190
  __sys_sendmsg+0x103/0x1d0
  __x64_sys_sendmsg+0x7d/0xb0
  do_syscall_64+0x32/0x50
  entry_SYSCALL_64_after_hwframe+0x44/0xa9
 RIP: 0033:0x7fde28c3be57
 Code: 0c 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51
c3 48 83 ec 28 89 54 24 1c 48 89 74 24 10
RSP: 002b:00007ffc09330028 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007fde28c3be57
RDX: 0000000000000000 RSI: 00007ffc09330090 RDI: 0000000000000003
RBP: 000000005f45f911 R08: 0000000000000001 R09: 00007ffc0933012c
R10: 0000000000000076 R11: 0000000000000246 R12: 0000000000000001
R13: 00007ffc09330290 R14: 00007ffc09330eee R15: 00005610e48ed020

Fixes: 1bff1a0c9bbd ("ipv4: Add function to send route updates")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 5.4.64

Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: usb: Fix uninit-was-stored issue in asix_read_phy_addr()

commit a092b7233f0e000cc6f2c71a49e2ecc6f917a5fc upstream.

The buffer size is 2 Bytes and we expect to receive the same amount of
data. But sometimes we receive less data and run into uninit-was-stored
issue upon read. Hence modify the error check on the return value to match
with the buffer size as a prevention.

Reported-and-tested by: syzbot+a7e220df5a81d1ab400e@syzkaller.appspotmail.com
Signed-off-by: Himadri Pandya <himadrispandya@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cfg80211: regulatory: reject invalid hints

commit 47caf685a6854593348f216e0b489b71c10cbe03 upstream.

Reject invalid hints early in order to not cause a kernel
WARN later if they're restored to or similar.

Reported-by: syzbot+d451401ffd00a60677ee@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?extid=d451401ffd00a60677ee
Link: https://lore.kernel.org/r/20200819084648.13956-1-johannes@sipsolutions.net
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm/khugepaged.c: fix khugepaged's request size in collapse_file

commit e5a59d308f52bb0052af5790c22173651b187465 upstream.

collapse_file() in khugepaged passes PAGE_SIZE as the number of pages to
be read to page_cache_sync_readahead().  The intent was probably to read
a single page.  Fix it to use the number of pages to the end of the
window instead.

Fixes: 99cb0dbd47a1 ("mm,thp: add read-only THP support for (non-shmem) FS")
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Acked-by: Song Liu <songliubraving@fb.com>
Acked-by: Yang Shi <shy828301@gmail.com>
Acked-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: Eric Biggers <ebiggers@google.com>
Link: https://lkml.kernel.org/r/20200903140844.14194-2-willy@infradead.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm/hugetlb: fix a race between hugetlb sysctl handlers

commit 17743798d81238ab13050e8e2833699b54e15467 upstream.

There is a race between the assignment of `table->data` and write value
to the pointer of `table->data` in the __do_proc_doulongvec_minmax() on
the other thread.

  CPU0:                                 CPU1:
                                        proc_sys_write
  hugetlb_sysctl_handler                  proc_sys_call_handler
  hugetlb_sysctl_handler_common             hugetlb_sysctl_handler
    table->data = &tmp;                       hugetlb_sysctl_handler_common
                                                table->data = &tmp;
      proc_doulongvec_minmax
        do_proc_doulongvec_minmax           sysctl_head_finish
          __do_proc_doulongvec_minmax         unuse_table
            i = table->data;
            *i = val;  // corrupt CPU1's stack

Fix this by duplicating the `table`, and only update the duplicate of
it.  And introduce a helper of proc_hugetlb_doulongvec_minmax() to
simplify the code.

The following oops was seen:

    BUG: kernel NULL pointer dereference, address: 0000000000000000
    #PF: supervisor instruction fetch in kernel mode
    #PF: error_code(0x0010) - not-present page
    Code: Bad RIP value.
    ...
    Call Trace:
     ? set_max_huge_pages+0x3da/0x4f0
     ? alloc_pool_huge_page+0x150/0x150
     ? proc_doulongvec_minmax+0x46/0x60
     ? hugetlb_sysctl_handler_common+0x1c7/0x200
     ? nr_hugepages_store+0x20/0x20
     ? copy_fd_bitmaps+0x170/0x170
     ? hugetlb_sysctl_handler+0x1e/0x20
     ? proc_sys_call_handler+0x2f1/0x300
     ? unregister_sysctl_table+0xb0/0xb0
     ? __fd_install+0x78/0x100
     ? proc_sys_write+0x14/0x20
     ? __vfs_write+0x4d/0x90
     ? vfs_write+0xef/0x240
     ? ksys_write+0xc0/0x160
     ? __ia32_sys_read+0x50/0x50
     ? __close_fd+0x129/0x150
     ? __x64_sys_write+0x43/0x50
     ? do_syscall_64+0x6c/0x200
     ? entry_SYSCALL_64_after_hwframe+0x44/0xa9

Fixes: e5ff215941d5 ("hugetlb: multiple hstates for multiple page sizes")
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Andi Kleen <ak@linux.intel.com>
Link: http://lkml.kernel.org/r/20200828031146.43035-1-songmuchun@bytedance.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

checkpatch: fix the usage of capture group ( ... )

commit 13e45417cedbfc44b1926124b1846f5ee8c6ba4a upstream.

The usage of "capture group (...)" in the immediate condition after `&&`
results in `$1` being uninitialized.  This issues a warning "Use of
uninitialized value $1 in regexp compilation at ./scripts/checkpatch.pl
line 2638".

I noticed this bug while running checkpatch on the set of commits from
v5.7 to v5.8-rc1 of the kernel on the commits with a diff content in
their commit message.

This bug was introduced in the script by commit e518e9a59ec3
("checkpatch: emit an error when there's a diff in a changelog").  It
has been in the script since then.

The author intended to store the match made by capture group in variable
`$1`.  This should have contained the name of the file as `[\w/]+`
matched.  However, this couldn't be accomplished due to usage of capture
group and `$1` in the same regular expression.

Fix this by placing the capture group in the condition before `&&`.
Thus, `$1` can be initialized to the text that capture group matches
thereby setting it to the desired and required value.

Fixes: e518e9a59ec3 ("checkpatch: emit an error when there's a diff in a changelog")
Signed-off-by: Mrinal Pandey <mrinalmni@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Reviewed-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Cc: Joe Perches <joe@perches.com>
Link: https://lkml.kernel.org/r/20200714032352.f476hanaj2dlmiot@mrinalpandey
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sdhci: tegra: Add missing TMCLK for data timeout

commit 8048822bac01936fda2c7b924a52131da81e6198 upstream.

commit b5a84ecf025a ("mmc: tegra: Add Tegra210 support")

Tegra210 and later has a separate sdmmc_legacy_tm (TMCLK) used by Tegra
SDMMC hawdware for data timeout to achive better timeout than using
SDCLK and using TMCLK is recommended.

USE_TMCLK_FOR_DATA_TIMEOUT bit in Tegra SDMMC register
SDHCI_TEGRA_VENDOR_SYS_SW_CTRL can be used to choose either TMCLK or
SDCLK for data timeout.

Default USE_TMCLK_FOR_DATA_TIMEOUT bit is set to 1 and TMCLK is used
for data timeout by Tegra SDMMC hardware and having TMCLK not enabled
is not recommended.

So, this patch adds quirk NVQUIRK_HAS_TMCLK for SoC having separate
timeout clock and keeps TMCLK enabled all the time.

Fixes: b5a84ecf025a ("mmc: tegra: Add Tegra210 support")
Cc: stable <stable@vger.kernel.org> # 5.4
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Link: https://lore.kernel.org/r/1598548861-32373-8-git-send-email-skomatineni@nvidia.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf record: Correct the help info of option "--no-bpf-event"

commit a060c1f12b525ba828f871eff3127dabf8daa1e6 upstream.

The help info of option "--no-bpf-event" is wrongly described as "record
bpf events", correct it.

Committer testing:

  $ perf record -h bpf

   Usage: perf record [<options>] [<command>]
      or: perf record [<options>] -- <command> [<options>]

          --clang-opt <clang options>
                            options passed to clang when compiling BPF scriptlets
          --clang-path <clang path>
                            clang binary to use for compiling BPF scriptlets
          --no-bpf-event    do not record bpf events

  $

Fixes: 71184c6ab7e6 ("perf record: Replace option --bpf-event with --no-bpf-event")
Signed-off-by: Wei Li <liwei391@huawei.com>
Acked-by: Song Liu <songliubraving@fb.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Hanjun Guo <guohanjun@huawei.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Li Bin <huawei.libin@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/20200819031947.12115-1-liwei391@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

vfio/pci: Fix SR-IOV VF handling with MMIO blocking

commit ebfa440ce38b7e2e04c3124aa89c8a9f4094cf21 upstream.

SR-IOV VFs do not implement the memory enable bit of the command
register, therefore this bit is not set in config space after
pci_enable_device().  This leads to an unintended difference
between PF and VF in hand-off state to the user.  We can correct
this by setting the initial value of the memory enable bit in our
virtualized config space.  There's really no need however to
ever fault a user on a VF though as this would only indicate an
error in the user's management of the enable bit, versus a PF
where the same access could trigger hardware faults.

Fixes: abafbc551fdd ("vfio-pci: Invalidate mmaps and block MMIO access on disabled memory")
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm: madvise: fix vma user-after-free

commit 7867fd7cc44e63c6673cd0f8fea155456d34d0de upstream.

The syzbot reported the below use-after-free:

  BUG: KASAN: use-after-free in madvise_willneed mm/madvise.c:293 [inline]
  BUG: KASAN: use-after-free in madvise_vma mm/madvise.c:942 [inline]
  BUG: KASAN: use-after-free in do_madvise.part.0+0x1c8b/0x1cf0 mm/madvise.c:1145
  Read of size 8 at addr ffff8880a6163eb0 by task syz-executor.0/9996

  CPU: 0 PID: 9996 Comm: syz-executor.0 Not tainted 5.9.0-rc1-syzkaller #0
  Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
  Call Trace:
    __dump_stack lib/dump_stack.c:77 [inline]
    dump_stack+0x18f/0x20d lib/dump_stack.c:118
    print_address_description.constprop.0.cold+0xae/0x497 mm/kasan/report.c:383
    __kasan_report mm/kasan/report.c:513 [inline]
    kasan_report.cold+0x1f/0x37 mm/kasan/report.c:530
    madvise_willneed mm/madvise.c:293 [inline]
    madvise_vma mm/madvise.c:942 [inline]
    do_madvise.part.0+0x1c8b/0x1cf0 mm/madvise.c:1145
    do_madvise mm/madvise.c:1169 [inline]
    __do_sys_madvise mm/madvise.c:1171 [inline]
    __se_sys_madvise mm/madvise.c:1169 [inline]
    __x64_sys_madvise+0xd9/0x110 mm/madvise.c:1169
    do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
    entry_SYSCALL_64_after_hwframe+0x44/0xa9

  Allocated by task 9992:
    kmem_cache_alloc+0x138/0x3a0 mm/slab.c:3482
    vm_area_alloc+0x1c/0x110 kernel/fork.c:347
    mmap_region+0x8e5/0x1780 mm/mmap.c:1743
    do_mmap+0xcf9/0x11d0 mm/mmap.c:1545
    vm_mmap_pgoff+0x195/0x200 mm/util.c:506
    ksys_mmap_pgoff+0x43a/0x560 mm/mmap.c:1596
    do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
    entry_SYSCALL_64_after_hwframe+0x44/0xa9

  Freed by task 9992:
    kmem_cache_free.part.0+0x67/0x1f0 mm/slab.c:3693
    remove_vma+0x132/0x170 mm/mmap.c:184
    remove_vma_list mm/mmap.c:2613 [inline]
    __do_munmap+0x743/0x1170 mm/mmap.c:2869
    do_munmap mm/mmap.c:2877 [inline]
    mmap_region+0x257/0x1780 mm/mmap.c:1716
    do_mmap+0xcf9/0x11d0 mm/mmap.c:1545
    vm_mmap_pgoff+0x195/0x200 mm/util.c:506
    ksys_mmap_pgoff+0x43a/0x560 mm/mmap.c:1596
    do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
    entry_SYSCALL_64_after_hwframe+0x44/0xa9

It is because vma is accessed after releasing mmap_lock, but someone
else acquired the mmap_lock and the vma is gone.

Releasing mmap_lock after accessing vma should fix the problem.

Fixes: 692fe62433d4c ("mm: Handle MADV_WILLNEED through vfs_fadvise()")
Reported-by: syzbot+b90df26038d1d5d85c97@syzkaller.appspotmail.com
Signed-off-by: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: <stable@vger.kernel.org> [5.4+]
Link: https://lkml.kernel.org/r/20200816141204.162624-1-shy828301@gmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm: slub: fix conversion of freelist_corrupted()

commit dc07a728d49cf025f5da2c31add438d839d076c0 upstream.

Commit 52f23478081ae0 ("mm/slub.c: fix corrupted freechain in
deactivate_slab()") suffered an update when picked up from LKML [1].

Specifically, relocating 'freelist = NULL' into 'freelist_corrupted()'
created a no-op statement.  Fix it by sticking to the behavior intended
in the original patch [1].  In addition, make freelist_corrupted()
immune to passing NULL instead of &freelist.

The issue has been spotted via static analysis and code review.

[1] https://lore.kernel.org/linux-mm/20200331031450.12182-1-dongli.zhang@oracle.com/

Fixes: 52f23478081ae0 ("mm/slub.c: fix corrupted freechain in deactivate_slab()")
Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Dongli Zhang <dongli.zhang@oracle.com>
Cc: Joe Jin <joe.jin@oracle.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20200824130643.10291-1-erosca@de.adit-jv.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dm thin metadata: Fix use-after-free in dm_bm_set_read_only

commit 3a653b205f29b3f9827a01a0c88bfbcb0d169494 upstream.

The following error ocurred when testing disk online/offline:

[  301.798344] device-mapper: thin: 253:5: aborting current metadata transaction
[  301.848441] device-mapper: thin: 253:5: failed to abort metadata transaction
[  301.849206] Aborting journal on device dm-26-8.
[  301.850489] EXT4-fs error (device dm-26) in __ext4_new_inode:943: Journal has aborted
[  301.851095] EXT4-fs (dm-26): Delayed block allocation failed for inode 398742 at logical offset 181 with max blocks 19 with error 30
[  301.854476] BUG: KASAN: use-after-free in dm_bm_set_read_only+0x3a/0x40 [dm_persistent_data]

Reason is:

 metadata_operation_failed
    abort_transaction
        dm_pool_abort_metadata
    __create_persistent_data_objects
        r = __open_or_format_metadata
        if (r) --> If failed will free pmd->bm but pmd->bm not set NULL
    dm_block_manager_destroy(pmd->bm);
    set_pool_mode
dm_pool_metadata_read_only(pool->pmd);
dm_bm_set_read_only(pmd->bm);  --> use-after-free

Add checks to see if pmd->bm is NULL in dm_bm_set_read_only and
dm_bm_set_read_write functions.  If bm is NULL it means creating the
bm failed and so dm_bm_is_read_only must return true.

Signed-off-by: Ye Bin <yebin10@huawei.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dm thin metadata: Avoid returning cmd->bm wild pointer on error

commit 219403d7e56f9b716ad80ab87db85d29547ee73e upstream.

Maybe __create_persistent_data_objects() caller will use PTR_ERR as a
pointer, it will lead to some strange things.

Signed-off-by: Ye Bin <yebin10@huawei.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dm cache metadata: Avoid returning cmd->bm wild pointer on error

commit d16ff19e69ab57e08bf908faaacbceaf660249de upstream.

Maybe __create_persistent_data_objects() caller will use PTR_ERR as a
pointer, it will lead to some strange things.

Signed-off-by: Ye Bin <yebin10@huawei.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dm crypt: Initialize crypto wait structures

commit 7785a9e4c228db6d01086a52d5685cd7336a08b7 upstream.

Use the DECLARE_CRYPTO_WAIT() macro to properly initialize the crypto
wait structures declared on stack before their use with
crypto_wait_req().

Fixes: 39d13a1ac41d ("dm crypt: reuse eboiv skcipher for IV generation")
Fixes: bbb1658461ac ("dm crypt: Implement Elephant diffuser for Bitlocker compatibility")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dm integrity: fix error reporting in bitmap mode after creation

commit e27fec66f0a94e35a35548bd0b29ae616e62ec62 upstream.

The dm-integrity target did not report errors in bitmap mode just after
creation. The reason is that the function integrity_recalc didn't clean up
ic->recalc_bitmap as it proceeded with recalculation.

Fix this by updating the bitmap accordingly -- the double shift serves
to rounddown.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Fixes: 468dfca38b1a ("dm integrity: add a bitmap mode")
Cc: stable@vger.kernel.org # v5.2+
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dm mpath: fix racey management of PG initialization

commit c322ee9320eaa4013ca3620b1130992916b19b31 upstream.

Commit 935fcc56abc3 ("dm mpath: only flush workqueue when needed")
changed flush_multipath_work() to avoid needless workqueue
flushing (of a multipath global workqueue). But that change didn't
realize the surrounding flush_multipath_work() code should also only
run if 'pg_init_in_progress' is set.

Fix this by only doing all of flush_multipath_work()'s PG init related
work if 'pg_init_in_progress' is set.

Otherwise multipath_wait_for_pg_init_completion() will run
unconditionally but the preceeding flush_workqueue(kmpath_handlerd)
may not. This could lead to deadlock (though only if kmpath_handlerd
never runs a corresponding work to decrement 'pg_init_in_progress').

It could also be, though highly unlikely, that the kmpath_handlerd
work that does PG init completes before 'pg_init_in_progress' is set,
and then an intervening DM table reload's multipath_postsuspend()
triggers flush_multipath_work().

Fixes: 935fcc56abc3 ("dm mpath: only flush workqueue when needed")
Cc: stable@vger.kernel.org
Reported-by: Ben Marzinski <bmarzins@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dm writecache: handle DAX to partitions on persistent memory correctly

commit f9e040efcc28309e5c592f7e79085a9a52e31f58 upstream.

The function dax_direct_access doesn't take partitions into account,
it always maps pages from the beginning of the device. Therefore,
persistent_memory_claim() must get the partition offset using
get_start_sect() and add it to the page offsets passed to
dax_direct_access().

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Fixes: 48debafe4f2f ("dm: add writecache target")
Cc: stable@vger.kernel.org # 4.18+
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amd/pm: avoid false alarm due to confusing softwareshutdowntemp setting

commit 971df65cbf32da9bc9af52c1196ca504dd316086 upstream.

Normally softwareshutdowntemp should be greater than Thotspotlimit.
However, on some VEGA10 ASIC, the softwareshutdowntemp is 91C while
Thotspotlimit is 105C. This seems not right and may trigger some
false alarms.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dmaengine: dw-edma: Fix scatter-gather address calculation

commit 05655541c9503bfd01af4e6cbd7f5a29ac748e6c upstream.

Fix the source and destination physical address calculation of a
peripheral device on scatter-gather implementation.

This issue manifested during tests using a 64 bits architecture system.
The abnormal behavior wasn't visible before due to all previous tests
were done using 32 bits architecture system, that masked his effect.

Fixes: e63d79d1ffcd ("dmaengine: Add Synopsys eDMA IP core driver")
Cc: stable@vger.kernel.org
Signed-off-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
Link: https://lore.kernel.org/r/8d3ab7e2ba96563fe3495b32f60077fffb85307d.1597327623.git.gustavo.pimentel@synopsys.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

blk-iocost: ioc_pd_free() shouldn't assume irq disabled

commit 5aeac7c4b16069aae49005f0a8d4526baa83341b upstream.

ioc_pd_free() grabs irq-safe ioc->lock without ensuring that irq is disabled
when it can be called with irq disabled or enabled. This has a small chance
of causing A-A deadlocks and triggers lockdep splats. Use irqsave operations
instead.

Signed-off-by: Tejun Heo <tj@kernel.org>
Fixes: 7caa47151ab2 ("blkcg: implement blk-iocost")
Cc: stable@vger.kernel.org # v5.4+
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

libata: implement ATA_HORKAGE_MAX_TRIM_128M and apply to Sandisks

commit 3b5455636fe26ea21b4189d135a424a6da016418 upstream.

All three generations of Sandisk SSDs lock up hard intermittently.
Experiments showed that disabling NCQ lowered the failure rate significantly
and the kernel has been disabling NCQ for some models of SD7's and 8's,
which is obviously undesirable.

Karthik worked with Sandisk to root cause the hard lockups to trim commands
larger than 128M. This patch implements ATA_HORKAGE_MAX_TRIM_128M which
limits max trim size to 128M and applies it to all three generations of
Sandisk SSDs.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Karthik Shivaram <karthikgs@fb.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

block: ensure bdi->io_pages is always initialized

commit de1b0ee490eafdf65fac9eef9925391a8369f2dc upstream.

If a driver leaves the limit settings as the defaults, then we don't
initialize bdi->io_pages. This means that file systems may need to
work around bdi->io_pages == 0, which is somewhat messy.

Initialize the default value just like we do for ->ra_pages.

Cc: stable@vger.kernel.org
Fixes: 9491ae4aade6 ("mm: don't cap request size based on read-ahead setting")
Reported-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

block: allow for_each_bvec to support zero len bvec

commit 7e24969022cbd61ddc586f14824fc205661bb124 upstream.

Block layer usually doesn't support or allow zero-length bvec. Since
commit 1bdc76aea115 ("iov_iter: use bvec iterator to implement
iterate_bvec()"), iterate_bvec() switches to bvec iterator. However,
Al mentioned that 'Zero-length segments are not disallowed' in iov_iter.

Fixes for_each_bvec() so that it can move on after seeing one zero
length bvec.

Fixes: 1bdc76aea115 ("iov_iter: use bvec iterator to implement iterate_bvec()")
Reported-by: syzbot <syzbot+61acc40a49a3e46e25ea@syzkaller.appspotmail.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Tested-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: <stable@vger.kernel.org>
Link: https://www.mail-archive.com/linux-kernel@vger.kernel.org/msg2262077.html
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

affs: fix basic permission bits to actually work

commit d3a84a8d0dde4e26bc084b36ffcbdc5932ac85e2 upstream.

The basic permission bits (protection bits in AmigaOS) have been broken
in Linux' AFFS - it would only set bits, but never delete them.
Also, contrary to the documentation, the Archived bit was not handled.

Let's fix this for good, and set the bits such that Linux and classic
AmigaOS can coexist in the most peaceful manner.

Also, update the documentation to represent the current state of things.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Signed-off-by: Max Staudt <max@enpas.org>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: rc: uevent sysfs file races with rc_unregister_device()

commit 4f0835d6677dc69263f90f976524cb92b257d9f4 upstream.

Only report uevent file contents if device still registered, else we
might read freed memory.

Reported-by: syzbot+ceef16277388d6f24898@syzkaller.appspotmail.com
Cc: Hillf Danton <hdanton@sina.com>
Cc: <stable@vger.kernel.org> # 4.16+
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: rc: do not access device via sysfs after rc_unregister_device()

commit a2e2d73fa28136598e84db9d021091f1b98cbb1a upstream.

Device drivers do not expect to have change_protocol or wakeup
re-programming to be accesed after rc_unregister_device(). This can
cause the device driver to access deallocated resources.

Cc: <stable@vger.kernel.org> # 4.16+
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: sdhci-pci: Fix SDHCI_RESET_ALL for CQHCI for Intel GLK-based controllers

commit df57d73276b863af1debc48546b0e59e44998a55 upstream.

For Intel controllers, SDHCI_RESET_ALL resets also CQHCI registers.
Normally, SDHCI_RESET_ALL is not used while CQHCI is enabled, but that can
happen on the error path. e.g. if mmc_cqe_recovery() fails, mmc_blk_reset()
is called which, for a eMMC that does not support HW Reset, will cycle the
bus power and the driver will perform SDHCI_RESET_ALL.

So whenever performing SDHCI_RESET_ALL ensure CQHCI is deactivated.
That will force the driver to reinitialize CQHCI when it is next used.

A similar change was done already for sdhci-msm, and other drivers using
CQHCI might benefit from a similar change, if they also have CQHCI reset
by SDHCI_RESET_ALL.

Fixes: 8ee82bda230fc9 ("mmc: sdhci-pci: Add CQHCI support for Intel GLK")
Cc: stable@vger.kernel.org # 5.4.x: 0ffa6cfbd949: mmc: cqhci: Add cqhci_deactivate()
Cc: stable@vger.kernel.org # 5.4+
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20200819121848.16967-1-adrian.hunter@intel.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: cqhci: Add cqhci_deactivate()

commit 0ffa6cfbd94982e6c028a8924b06a96c1b91bed8 upstream.

Host controllers can reset CQHCI either directly or as a consequence of
host controller reset. Add cqhci_deactivate() which puts the CQHCI
driver into a state that is consistent with that.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Veerabhadrarao Badiganti <vbadigan@codeaurora.org>
Link: https://lore.kernel.org/r/1583503724-13943-2-git-send-email-vbadigan@codeaurora.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: dt-bindings: Add resets/reset-names for Mediatek MMC bindings

commit 65557383191de46611dd3d6b639cbcfbade43c4a upstream.

Add description for resets/reset-names.

Cc: <stable@vger.kernel.org> # v5.4+
Fixes: 966580ad236e ("mmc: mediatek: add support for MT7622 SoC")
Signed-off-by: Wenbin Mei <wenbin.mei@mediatek.com>
Tested-by: Frank Wunderlich <frank-w@public-files.de>
Link: https://lore.kernel.org/r/20200814014346.6496-2-wenbin.mei@mediatek.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: mediatek: add optional module reset property

commit 855d388df217989fbf1f18c781ae6490dbb48e86 upstream.

This patch fixs eMMC-Access on mt7622/Bpi-64.
Before we got these Errors on mounting eMMC ion R64:
[   48.664925] blk_update_request: I/O error, dev mmcblk0, sector 204800 op 0x1:(WRITE)
flags 0x800 phys_seg 1 prio class 0
[   48.676019] Buffer I/O error on dev mmcblk0p1, logical block 0, lost sync page write

This patch adds a optional reset management for msdc.
Sometimes the bootloader does not bring msdc register
to default state, so need reset the msdc controller.

Cc: <stable@vger.kernel.org> # v5.4+
Fixes: 966580ad236e ("mmc: mediatek: add support for MT7622 SoC")
Signed-off-by: Wenbin Mei <wenbin.mei@mediatek.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Tested-by: Frank Wunderlich <frank-w@public-files.de>
Link: https://lore.kernel.org/r/20200814014346.6496-4-wenbin.mei@mediatek.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: dts: mt7622: add reset node for mmc device

commit d6f6cbeee4e5ee6976792851e0461c19f1ede864 upstream.

This commit adds reset node for mmc device.

Cc: <stable@vger.kernel.org> # v5.4+
Fixes: 966580ad236e ("mmc: mediatek: add support for MT7622 SoC")
Signed-off-by: Wenbin Mei <wenbin.mei@mediatek.com>
Tested-by: Frank Wunderlich <frank-w@public-files.de>
Acked-by: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/20200814014346.6496-3-wenbin.mei@mediatek.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>