release-2.6.35.13

Release 2.6.35.13

From: Andi Kleen <andi@firstfloor.org>

Release 2.6.35.13
Signed-off-by: Andi Kleen <ak@linux.intel.com>

2.6.35.13 longterm review

Also please revert the patch "fix-cred-leak-in-af_netlink" from 2.6.35.12.
The proper fix was "af_netlink-add-needed-scm_destroy-after-scm_send" which
was also added in that release. Here's a revert patch:

Signed-off-by: Andi Kleen <ak@linux.intel.com>

Revert "tpm_tis: Use timeouts returned from TPM"

[ upstream commit e58713724059da7d2982d6ad945192c8fca5b729 ]

This reverts commit 9b29050f8f75916f974a2d231ae5d3cd59792296.

It has caused hibernate regressions, for example Juri Sladby's report:

  "I'm unable to hibernate 2.6.37.1 unless I rmmod tpm_tis:
   [10974.074587] Suspending console(s) (use no_console_suspend to debug)
   [10974.103073] tpm_tis 00:0c: Operation Timed out
   [10974.103089] legacy_suspend(): pnp_bus_suspend+0x0/0xa0 returns -62
   [10974.103095] PM: Device 00:0c failed to freeze: error -62"

and Rafael points out that some of the new conditionals in that commit
seem to make no sense.  This commit needs more work and testing, let's
revert it for now.

Reported-by: Norbert Preining <preining@logic.at>
Reported-and-requested-by: Jiri Slaby <jirislaby@gmail.com>
Cc: Stefan Berger <stefanb@linux.vnet.ibm.com>
Cc: Guillaume Chazarain <guichaz@gmail.com>
Cc: Rajiv Andrade <srajiv@linux.vnet.ibm.com>
Acked-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Andi Kleen <ak@linux.intel.com>

Revert "TPM: Long default timeout fix"

[ upstream commit 8d1dc20e8d689c7e6a0a4d2c94e36a99d5793ecb ]

This reverts commit c4ff4b829ef9e6353c0b133b7adb564a68054979.

Ted Ts'o reports:

 "TPM is working for me so I can log into employer's network in 2.6.37.
  It broke when I tried 2.6.38-rc6, with the following relevant lines
  from my dmesg:

  [   11.081627] tpm_tis 00:0b: 1.2 TPM (device-id 0x0, rev-id 78)
  [   25.734114] tpm_tis 00:0b: Operation Timed out
  [   78.040949] tpm_tis 00:0b: Operation Timed out

  This caused me to get suspicious, especially since the _other_ TPM
  commit in 2.6.38 had already been reverted, so I tried reverting
  commit c4ff4b829e: "TPM: Long default timeout fix".  With this commit
  reverted, my TPM on my Lenovo T410 is once again working."

Requested-and-tested-by: Theodore Ts'o <tytso@mit.edu>
Acked-by: Rajiv Andrade <srajiv@linux.vnet.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Andi Kleen <ak@linux.intel.com>

2.6.35.y: Revert "SH: Add missing consts to sys_execve() declaration"

This reverts commit 1219932ca26da2026e598590a3b7a2f36b3c3621
(commit d8b5fc01683c66060edc202d6bb5635365822181 upstream).

The reverted commit depends on an upstream commit that has not
been applied to 2.6.35.y (d7627467b7a8dd6944885290a03a07ceb28c10eb).

This fixes a build failure on all SH devices:

/arch/sh/kernel/process_32.c:299: error: conflicting types for 'sys_execve'
/arch/sh/include/asm/syscalls_32.h:22: note: previous declaration of 'sys_execve' was here

Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>

USB: xhci - also free streams when resetting devices

upstream commit: 2dea75d96ade3c7cd2bfe73f99c7b3291dc3d03a

Currently, when resetting a device, xHCI driver disables all but one
endpoints and frees their rings, but leaves alone any streams that
might have been allocated. Later, when users try to free allocated
streams, we oops in xhci_setup_no_streams_ep_input_ctx() because
ep->ring is NULL.

Let's free not only rings but also stream data as well, so that
calling free_streams() on a device that was reset will be safe.

This should be queued for stable trees back to 2.6.35.

Reviewed-by: Micah Elizabeth Scott <micah@vmware.com>
Signed-off-by: Dmitry Torokhov <dtor@vmware.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: stable@kernel.org

USB: Fix unplug of device with active streams

upstream commit: b214f191d95ba4b5a35aebd69cd129cf7e3b1884

If I unplug a device while the UAS driver is loaded, I get an oops
in usb_free_streams().  This is because usb_unbind_interface() calls
usb_disable_interface() which calls usb_disable_endpoint() which sets
ep_out and ep_in to NULL.  Then the UAS driver calls usb_pipe_endpoint()
which returns a NULL pointer and passes an array of NULL pointers to
usb_free_streams().

I think the correct fix for this is to check for the NULL pointer
in usb_free_streams() rather than making the driver check for this
situation.  My original patch for this checked for dev->state ==
USB_STATE_NOTATTACHED, but the call to usb_disable_interface() is
conditional, so not all drivers would want this check.

Note from Sarah Sharp: This patch does avoid a potential dereference,
but the real fix (which will be implemented later) is to set the
.soft_unbind flag in the usb_driver structure for the UAS driver, and
all drivers that allocate streams.  The driver should free any streams
when it is unbound from the interface.  This avoids leaking stream rings
in the xHCI driver when usb_disable_interface() is called.

This should be queued for stable trees back to 2.6.35.

Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: stable@kernel.org

intel-iommu: Fix use after release during device attach

upstream commit 7a6610139a

Obtain the new pgd pointer before releasing the page containing this
value.

Cc: stable@kernel.org
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Reviewed-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

iwlwifi: fix skb usage after free

[AK: Did some changes for the backport to .35. Stanislaw, please verify
them]

Since

commit a120e912eb51e347f36c71b60a1d13af74d30e83
Author: Stanislaw Gruszka <sgruszka@redhat.com>
Date:   Fri Feb 19 15:47:33 2010 -0800

    iwlwifi: sanity check before counting number of tfds can be free

we use skb->data after calling ieee80211_tx_status_irqsafe(), which
could free skb instantly.

On current kernels I do not observe practical problems related with
bug, but on 2.6.35.y it cause random system hangs when stressing
wireless link.

Cc: stable@kernel.org # 2.6.32+
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>

ALSA: hda - VIA: Fix stereo mixer recording no sound issue

commit bff5fbf50bd498c217994bd2d41a53ac3141185a upstream.

Modify function via_mux_enum_put() to fix stereo mixer recording
no sound issue.

Signed-off-by: Lydia Wang <lydiawang@viatech.com.cn>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Andi Kleen <ak@linux.intel.com>

ALSA: hda - VIA: Add missing support for VT1718S in A-A path

commit ab657e0cacc39d88145871c6a3c844597c02d406 upstream.

Modify mute_aa_path() function to support VT1718S codec.

Signed-off-by: Lydia Wang <lydiawang@viatech.com.cn>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Andi Kleen <ak@linux.intel.com>

Revert "intel_idle: PCI quirk to prevent Lenovo Ideapad s10-3 boot hang"

This reverts commit 05f7676dc3559c2b9061fda4e44c085a8d32fb05.

To quote Len Brown:
intel_idle was deemed a "feature", and thus not included in
2.6.33.stable, and thus 2.6.33.stable does not need this patch.
so I'm removing it.

Cc: Len Brown <len.brown@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Andi Kleen <ak@linux.intel.com>

uvcvideo: Fix descriptor parsing for video output devices

commit 4093a5c4a3f59cba1a085bbf87b6ffdddc5a443d upstream.

Commit 4057ac6ca9a77c4275b34b5925ab5c99557913b1

    V4L/DVB (13505): uvcvideo: Refactor chain scan

broke output terminals parsing. Fix it.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Andi Kleen <ak@linux.intel.com>

iwlagn: Support new 5000 microcode.

commit 41504cce240f791f1e16561db95728c5537fbad9 upstream.

New iwlwifi-5000 microcode requires driver support for API version 5.

Signed-off-by: Don Fry <donald.h.fry@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Andi Kleen <ak@linux.intel.com>

dasd: correct device table

commit 5da24b7627ff821e154a3aaecd5d60e1d8e228a5 upstream.

The 3880 storage control unit supports a 3380 device
type, but not a 3390 device type.

Reported-by: Stephen Powell <zlinuxman@wowway.com>
Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Stephen Powell <zlinuxman@wowway.com>
Cc: Jonathan Nieder <jrnieder@gmail.com>
Cc: Bastian Blank <waldi@debian.org>

Remove extra struct page member from the buffer info structure

commit b1d670f10e8078485884f0cf7e384d890909aeaa upstream.

declaration.

Reported-by: Andi Kleen <andi@firstfloor.org>
Signed-off-by: Greg Rose <gregory.v.rose@intel.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Tested-by: Emil Tantilov <emil.s.tantilov@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Cc: Andreas Radke <a.radke@arcor.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

UBIFS: fix master node recovery

commit 6e0d9fd38b750d678bf9fd07db23582f52fafa55 upstream.

This patch fixes the following symptoms:
1. Unmount UBIFS cleanly.
2. Start mounting UBIFS R/W and have a power cut immediately
3. Start mounting UBIFS R/O, this succeeds
4. Try to re-mount UBIFS R/W - this fails immediately or later on,
   because UBIFS will write the master node to the flash area
   which has been written before.

The analysis of the problem:

1. UBIFS is unmounted cleanly, both copies of the master node are clean.
2. UBIFS is being mounter R/W, starts changing master node copy 1, and
   a power cut happens. The copy N1 becomes corrupted.
3. UBIFS is being mounted R/O. It notices the copy N1 is corrupted and
   reads copy N2. Copy N2 is clean.
4. Because of R/O mode, UBIFS cannot recover copy 1.
5. The mount code (ubifs_mount()) sees that the master node is clean,
   so it decides that no recovery is needed.
6. We are re-mounting R/W. UBIFS believes no recovery is needed and
   starts updating the master node, but copy N1 is still corrupted
   and was not recovered!

Fix this problem by marking the master node as dirty every time we
recover it and we are in R/O mode. This forces further recovery and
the UBIFS cleans-up the corruptions and recovers the copy N1 when
re-mounting R/W later.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Andi Kleen <ak@linux.intel.com>

kconfig: Avoid buffer underrun in choice input

commit 3ba41621156681afcdbcd624e3191cbc65eb94f4 upstream.

Commit 40aee729b350 ('kconfig: fix default value for choice input')
fixed some cases where kconfig would select the wrong option from a
choice with a single valid option and thus enter an infinite loop.

However, this broke the test for user input of the form 'N?', because
when kconfig selects the single valid option the input is zero-length
and the test will read the byte before the input buffer.  If this
happens to contain '?' (as it will in a mips build on Debian unstable
today) then kconfig again enters an infinite loop.

Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Andi Kleen <ak@linux.intel.com>

ASoC: Fix output PGA enabling in wm_hubs CODECs

commit 39cca168bdfaef9d0c496ec27f292445d6184946 upstream.

The output PGA was not being powered up in headphone and speaker paths,
removing the ability to offer volume control and mute with the output
PGA.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Andi Kleen <ak@linux.intel.com>

serial/imx: read cts state only after acking cts change irq

commit 5680e94148a86e8c31fdc5cb0ea0d5c6810c05b0 upstream.

If cts changes between reading the level at the cts input (USR1_RTSS)
and acking the irq (USR1_RTSD) the last edge doesn't generate an irq and
uart_handle_cts_change is called with a outdated value for cts.

The race was introduced by commit

ceca629 ([ARM] 2971/1: i.MX uart handle rts irq)

Reported-by: Arwed Springer <Arwed.Springer@de.trumpf.com>
Tested-by: Arwed Springer <Arwed.Springer@de.trumpf.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Andi Kleen <ak@linux.intel.com>

NFS: nfs_wcc_update_inode() should set nfsi->attr_gencount

commit 27dc1cd3ad9300f81e1219e5fc305d91d85353f8 upstream.

If the call to nfs_wcc_update_inode() results in an attribute update, we
need to ensure that the inode's attr_gencount gets bumped too, otherwise
we are not protected against races with other GETATTR calls.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Andi Kleen <ak@linux.intel.com>

drm/radeon/kms: fix bad shift in atom iio table parser

commit 8e461123f28e6b17456225e70eb834b3b30d28bb upstream.

Noticed by Patrick Lowry.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Andi Kleen <ak@linux.intel.com>

intel-iommu: Fix get_domain_for_dev() error path

commit 2fe9723df8e45fd247782adea244a5e653c30bf4 upstream.

If we run out of domain_ids and fail iommu_attach_domain(), we
fall into domain_exit() without having setup enough of the
domain structure for this to do anything useful.  In fact, it
typically runs off into the weeds walking the bogus domain->devices
list.  Just free the domain.

Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Acked-by: Donald Dutile <ddutile@redhat.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Andi Kleen <ak@linux.intel.com>

intel-iommu: Unlink domain from iommu

commit a97590e56d0d58e1dd262353f7cbd84e81d8e600 upstream.

When we remove a device, we unlink the iommu from the domain, but
we never do the reverse unlinking of the domain from the iommu.
This means that we never clear iommu->domain_ids, eventually leading
to resource exhaustion if we repeatedly bind and unbind a device
to a driver.  Also free empty domains to avoid a resource leak.

Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Acked-by: Donald Dutile <ddutile@redhat.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Andi Kleen <ak@linux.intel.com>

x86, gart: Make sure GART does not map physmem above 1TB

commit 665d3e2af83c8fbd149534db8f57d82fa6fa6753 upstream.

The GART can only map physical memory below 1TB. Make sure
the gart driver in the kernel does not try to map memory
above 1TB.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Link: http://lkml.kernel.org/r/1303134346-5805-5-git-send-email-joerg.roedel@amd.com
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

p54: Initialize extra_len in p54_tx_80211

commit a6756da9eace8b4af73e9dea43f1fc2889224c94 upstream.

This patch fixes a very serious off-by-one bug in
the driver, which could leave the device in an
unresponsive state.

The problem was that the extra_len variable [used to
reserve extra scratch buffer space for the firmware]
was left uninitialized. Because p54_assign_address
later needs the value to reserve additional space,
the resulting frame could be to big for the small
device's memory window and everything would
immediately come to a grinding halt.

Reference: https://bugs.launchpad.net/bugs/722185

Acked-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: Jason Conti <jason.conti@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Andi Kleen <ak@linux.intel.com>

block, blk-sysfs: Fix an err return path in blk_register_queue()

commit ed5302d3c25006a9edc7a7fbea97a30483f89ef7 upstream.

We do not call blk_trace_remove_sysfs() in err return path
if kobject_add() fails. This path fixes it.

Signed-off-by: Liu Yuan <tailai.ly@taobao.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Andi Kleen <ak@linux.intel.com>

ath: add missing regdomain pair 0x5c mapping

commit bd39a274fb7b43374c797bafdb7f506598f36f77 upstream.

Joe Culler reported a problem with his AR9170 device:

> ath: EEPROM regdomain: 0x5c
> ath: EEPROM indicates we should expect a direct regpair map
> ath: invalid regulatory domain/country code 0x5c
> ath: Invalid EEPROM contents

It turned out that the regdomain 'APL7_FCCA' was not mapped yet.
According to Luis R. Rodriguez [Atheros' engineer] APL7 maps to
FCC_CTL and FCCA maps to FCC_CTL as well, so the attached patch
should be correct.

Reported-by: Joe Culler <joe.culler@gmail.com>
Acked-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Andi Kleen <ak@linux.intel.com>

ath9k: fix a chip wakeup related crash in ath9k_start

[ upstream commit f62d816fc4324afbb7cf90110c70b6a14139b225 ]

When the chip is still asleep when ath9k_start is called,
ath9k_hw_configpcipowersave can trigger a data bus error.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: stable@kernel.org
Signed-off-by: John W. Linville <linville@tuxdriver.com>

Input: synaptics - fix crash in synaptics_module_init()

[ upstream commit 708748670c7c6dd5bd3b141473086e6937e72737 ]

'struct dmi_system_id' arrays must always have a terminator to keep
dmi_check_system() from looking at data (and possibly crashing) it
isn't supposed to look at.

The issue went unnoticed until ef8313bb1a22e7d2125d9d758aa8a81f1de91d81,
but was introduced about a year earlier with
7705d548cbe33f18ea7713b9a07aa11047aaeca4 (which also similarly changed
lifebook.c, but the problem there got eliminated shortly afterwards).

The first hunk therefore is a stable candidate back to 2.6.33, while
the full change is needed only on 2.6.38.

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: stable@kernel.org
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

net: ax25: fix information leak to userland harder

commit 5b919f833d9d60588d026ad82d17f17e8872c7a9 upstream.

Commit fe10ae53384e48c51996941b7720ee16995cbcb7 adds a memset() to clear
the structure being sent back to userspace, but accidentally used the
wrong size.

Reported-by: Brad Spengler <spender@grsecurity.net>
Signed-off-by: Kees Cook <kees.cook@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Andi Kleen <ak@linux.intel.com>

x86, cpu: Fix regression in AMD errata checking code

commit 07a7795ca2e6e66d00b184efb46bd0e23d90d3fe upstream.

A bug in the family-model-stepping matching code caused the presence of
errata to go undetected when OSVW was not used. This causes hangs on
some K8 systems because the E400 workaround is not enabled.

Signed-off-by: Hans Rosenfeld <hans.rosenfeld@amd.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
LKML-Reference: <1282141190-930137-1-git-send-email-hans.rosenfeld@amd.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

USB: xhci - fix math in xhci_get_endpoint_interval()

commit dfa49c4ad120a784ef1ff0717168aa79f55a483a upstream.

When parsing exponent-expressed intervals we subtract 1 from the
value and then expect it to match with original + 1, which is
highly unlikely, and we end with frequent spew:

usb 3-4: ep 0x83 - rounding interval to 512 microframes

Also, parsing interval for fullspeed isochronous endpoints was
incorrect - according to USB spec they use exponent-based
intervals (but xHCI spec claims frame-based intervals). I trust
USB spec more, especially since USB core agrees with it.

This should be queued for stable kernels back to 2.6.31.

Reviewed-by: Micah Elizabeth Scott <micah@vmware.com>
Signed-off-by: Dmitry Torokhov <dtor@vmware.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Andi Kleen <ak@linux.intel.com>

USB: xhci - fix unsafe macro definitions

commit 5a6c2f3ff039154872ce597952f8b8900ea0d732 upstream.

Macro arguments used in expressions need to be enclosed in parenthesis
to avoid unpleasant surprises.

This should be queued for kernels back to 2.6.31

Signed-off-by: Dmitry Torokhov <dtor@vmware.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Andi Kleen <ak@linux.intel.com>

USB: fix formatting of SuperSpeed endpoints in /proc/bus/usb/devices

commit 2868a2b1ba8f9c7f6c4170519ebb6c62934df70e upstream.

Isochronous and interrupt SuperSpeed endpoints use the same mechanisms
for decoding bInterval values as HighSpeed ones so adjust the code
accordingly.

Also bandwidth reservation for SuperSpeed matches highspeed, not
low/full speed.

Signed-off-by: Dmitry Torokhov <dtor@vmware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Andi Kleen <ak@linux.intel.com>

USB: EHCI: unlink unused QHs when the controller is stopped

commit 94ae4976e253757e9b03a44d27d41b20f1829d80 upstream.

This patch (as1458) fixes a problem affecting ultra-reliable systems:
When hardware failover of an EHCI controller occurs, the data
structures do not get released correctly.  This is because the routine
responsible for removing unused QHs from the async schedule assumes
the controller is running properly (the frame counter is used in
determining how long the QH has been idle) -- but when a failover
causes the controller to be electronically disconnected from the PCI
bus, obviously it stops running.

The solution is simple: Allow scan_async() to remove a QH from the
async schedule if it has been idle for long enough _or_ if the
controller is stopped.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Reported-and-Tested-by: Dan Duval <dan.duval@stratus.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

proc: do proper range check on readdir offset

commit d8bdc59f215e62098bc5b4256fd9928bf27053a1 upstream.

Rather than pass in some random truncated offset to the pid-related
functions, check that the offset is in range up-front.

This is just cleanup, the previous commit fixed the real problem.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Andi Kleen <ak@linux.intel.com>

next_pidmap: fix overflow condition

commit c78193e9c7bcbf25b8237ad0dec82f805c4ea69b upstream.

next_pidmap() just quietly accepted whatever 'last' pid that was passed
in, which is not all that safe when one of the users is /proc.

Admittedly the proc code should do some sanity checking on the range
(and that will be the next commit), but that doesn't mean that the
helper functions should just do that pidmap pointer arithmetic without
checking the range of its arguments.

So clamp 'last' to PID_MAX_LIMIT.  The fact that we then do "last+1"
doesn't really matter, the for-loop does check against the end of the
pidmap array properly (it's only the actual pointer arithmetic overflow
case we need to worry about, and going one bit beyond isn't going to
overflow).

[ Use PID_MAX_LIMIT rather than pid_max as per Eric Biederman ]

Reported-by: Tavis Ormandy <taviso@cmpxchg8b.com>
Analyzed-by: Robert Święcki <robert@swiecki.net>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Andi Kleen <ak@linux.intel.com>

USB: option: Added support for Samsung GT-B3730/GT-B3710 LTE USB modem.

commit 80f9df3e0093ad9f1eeefd2ff7fd27daaa518d25 upstream.

Bind only modem AT command endpoint to option.

Signed-off-by: Marius B. Kotsbak <marius@kotsbak.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Andi Kleen <ak@linux.intel.com>

USB: option: Add new ONDA vendor id and product id for ONDA MT825UP

commit c6991b6fd2b4201174dc4620d0c8c4f5ff27b36f upstream.

This patch, adds to the option driver the Onda Communication
(http://www.ondacommunication.com) vendor id, and the MT825UP modem
device id.

Note that many variants of this same device are being release here in
Italy (at least one or two per telephony operator).

These devices are perfectly equivalent except for some predefined
settings (which can be changed of course).

It should be noted that most ONDA devices are allready supported (they
used other vendor's ids in the past). The patch seems working fine here,
and the rest of the driver seems uninfluenced.

Signed-off-by: Enrico Mioso <mrkiko.rs@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Andi Kleen <ak@linux.intel.com>

USB: ftdi_sio: add ids for Hameg HO720 and HO730

commit c53c2fab40cf16e13af66f40bfd27200cda98d2f upstream.

usb serial: ftdi_sio: add two missing USB ID's for Hameg interfaces HO720
and HO730

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Andi Kleen <ak@linux.intel.com>

USB: ftdi_sio: add PID for OCT DK201 docking station

commit 11a31d84129dc3133417d626643d714c9df5317e upstream.

Add PID 0x0103 for serial port of the OCT DK201 docking station.

Reported-by: Jan Hoogenraad <jan@hoogenraad.net>
Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Andi Kleen <ak@linux.intel.com>

USB: ftdi_sio: Added IDs for CTI USB Serial Devices

commit 5a9443f08c83c294c5c806a689c1184b27cb26b3 upstream.

I added new ProdutIds for two devices from CTI GmbH Leipzig.

Signed-off-by: Christian Simon <simon@swine.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Andi Kleen <ak@linux.intel.com>

x86, amd: Disable GartTlbWlkErr when BIOS forgets it

commit 5bbc097d890409d8eff4e3f1d26f11a9d6b7c07e upstream.

This patch disables GartTlbWlk errors on AMD Fam10h CPUs if
the BIOS forgets to do is (or is just too old). Letting
these errors enabled can cause a sync-flood on the CPU
causing a reboot.

The AMD BKDG recommends disabling GART TLB Wlk Error completely.

This patch is the fix for

https://bugzilla.kernel.org/show_bug.cgi?id=33012

on my machine.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Link: http://lkml.kernel.org/r/20110415131152.GJ18463@8bytes.org
Tested-by: Alexandre Demers <alexandre.f.demers@gmail.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

x86, AMD: Set ARAT feature on AMD processors

commit b87cf80af3ba4b4c008b4face3c68d604e1715c6 upstream.

Support for Always Running APIC timer (ARAT) was introduced in
commit db954b5898dd3ef3ef93f4144158ea8f97deb058. This feature
allows us to avoid switching timers from LAPIC to something else
(e.g. HPET) and go into timer broadcasts when entering deep
C-states.

AMD processors don't provide a CPUID bit for that feature but
they also keep APIC timers running in deep C-states (except for
cases when the processor is affected by erratum 400). Therefore
we should set ARAT feature bit on AMD CPUs.

Tested-by: Borislav Petkov <borislav.petkov@amd.com>
Acked-by: Andreas Herrmann <andreas.herrmann3@amd.com>
Acked-by: Mark Langsdorf <mark.langsdorf@amd.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@amd.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
LKML-Reference: <1300205624-4813-1-git-send-email-ostr@amd64.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

x86, cpu: Clean up AMD erratum 400 workaround

commit 9d8888c2a214aece2494a49e699a097c2ba9498b upstream.

Remove check_c1e_idle() and use the new AMD errata checking framework
instead.

Signed-off-by: Hans Rosenfeld <hans.rosenfeld@amd.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
LKML-Reference: <1280336972-865982-2-git-send-email-hans.rosenfeld@amd.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

x86, cpu: AMD errata checking framework

commit d78d671db478eb8b14c78501c0cee1cc7baf6967 upstream.

Errata are defined using the AMD_LEGACY_ERRATUM() or AMD_OSVW_ERRATUM()
macros. The latter is intended for newer errata that have an OSVW id
assigned, which it takes as first argument. Both take a variable number
of family-specific model-stepping ranges created by AMD_MODEL_RANGE().

Iff an erratum has an OSVW id, OSVW is available on the CPU, and the
OSVW id is known to the hardware, it is used to determine whether an
erratum is present. Otherwise, the model-stepping ranges are matched
against the current CPU to find out whether the erratum applies.

For certain special errata, the code using this framework might have to
conduct further checks to make sure an erratum is really (not) present.

Signed-off-by: Hans Rosenfeld <hans.rosenfeld@amd.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
LKML-Reference: <1280336972-865982-1-git-send-email-hans.rosenfeld@amd.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

UBIFS: fix oops when R/O file-system is fsync'ed

commit 78530bf7f2559b317c04991b52217c1608d5a58d upstream.

This patch fixes severe UBIFS bug: UBIFS oopses when we 'fsync()' an
file on R/O-mounter file-system. We (the UBIFS authors) incorrectly
thought that VFS would not propagate 'fsync()' down to the file-system
if it is read-only, but this is not the case.

It is easy to exploit this bug using the following simple perl script:

use strict;
use File::Sync qw(fsync sync);

die "File path is not specified" if not defined $ARGV[0];
my $path = $ARGV[0];

open FILE, "<", "$path" or die "Cannot open $path: $!";
fsync(\*FILE) or die "cannot fsync $path: $!";
close FILE or die "Cannot close $path: $!";

Thanks to Reuben Dowle <Reuben.Dowle@navico.com> for reporting about this
issue.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Reported-by: Reuben Dowle <Reuben.Dowle@navico.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

MAINTAINERS: update STABLE BRANCH info

commit d00ebeac5f24f290636f7a895dafc124b2930a08 upstream.

Drop Chris Wright from STABLE maintainers.  He hasn't done STABLE release
work for quite some time.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Acked-by: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Andi Kleen <ak@linux.intel.com>

ramfs: fix memleak on no-mmu arch

commit b836aec53e2bce71de1d5415313380688c851477 upstream.

On no-mmu arch, there is a memleak during shmem test.  The cause of this
memleak is ramfs_nommu_expand_for_mapping() added page refcount to 2
which makes iput() can't free that pages.

The simple test file is like this:

  int main(void)
  {
int i;
key_t k = ftok("/etc", 42);

for ( i=0; i<100; ++i) {
int id = shmget(k, 10000, 0644|IPC_CREAT);
if (id == -1) {
printf("shmget error\n");
}
if(shmctl(id, IPC_RMID, NULL ) == -1) {
printf("shm  rm error\n");
return -1;
}
}
printf("run ok...\n");
return 0;
  }

And the result:

  root:/> free
               total         used         free       shared      buffers
  Mem:         60320        17912        42408            0            0
  -/+ buffers:              17912        42408
  root:/> shmem
  run ok...
  root:/> free
               total         used         free       shared      buffers
  Mem:         60320        19096        41224            0            0
  -/+ buffers:              19096        41224
  root:/> shmem
  run ok...
  root:/> free
               total         used         free       shared      buffers
  Mem:         60320        20296        40024            0            0
  -/+ buffers:              20296        40024
  ...

After this patch the test result is:(no memleak anymore)

  root:/> free
               total         used         free       shared      buffers
  Mem:         60320        16668        43652            0            0
  -/+ buffers:              16668        43652
  root:/> shmem
  run ok...
  root:/> free
               total         used         free       shared      buffers
  Mem:         60320        16668        43652            0            0
  -/+ buffers:              16668        43652

Signed-off-by: Bob Liu <lliubbo@gmail.com>
Acked-by: Hugh Dickins <hughd@google.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Andi Kleen <ak@linux.intel.com>

mca.c: Fix cast from integer to pointer warning

commit c1d036c4d1cb00b7e8473a2ad0a78f13e13a8183 upstream.

ia64_mca_cpu_init has a void *data local variable that is assigned
the value from either __get_free_pages() or mca_bootmem(). The problem
is that __get_free_pages returns an unsigned long and mca_bootmem, via
alloc_bootmem(), returns a void *. format_mca_init_stack takes the void *,
and it's also used with __pa(), but that casts it to long anyway.

This results in the following build warning:

arch/ia64/kernel/mca.c:1898: warning: assignment makes pointer from
integer without a cast

Cast the return of __get_free_pages to a void * to avoid
the warning.

Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Andi Kleen <ak@linux.intel.com>

tioca: Fix assignment from incompatible pointer warnings

commit b4a6b3436531f6c5256e6d60d388c3c28ff1a0e9 upstream.

The prototype for sn_pci_provider->{dma_map,dma_map_consistent} expects
an unsigned long instead of a u64.

Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Andi Kleen <ak@linux.intel.com>

x86: Fix a bogus unwind annotation in lib/semaphore_32.S

commit e938c287ea8d977e079f07464ac69923412663ce upstream.

'simple' would have required specifying current frame address
and return address location manually, but that's obviously not
the case (and not necessary) here.

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
LKML-Reference: <4D6D1082020000780003454C@vpn.id2.novell.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

NET: cdc-phonet, handle empty phonet header

commit 468c3f924f043cad7a04f4f4d5224a2c9bc886c1 upstream.

Currently, for N 5800 XM I get:
cdc_phonet: probe of 1-6:1.10 failed with error -22

It's because phonet_header is empty. Extra altsetting looks like
there:
E 05 24 00 01 10 03 24 ab 05 24 06 0a 0b 04 24 fd  .$....$..$....$.
E 00                                               .

I don't see the header used anywhere so just check if the phonet
descriptor is there, not the structure itself.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Rémi Denis-Courmont <remi.denis-courmont@nokia.com>
Cc: David S. Miller <davem@davemloft.net>
Acked-by: Rémi Denis-Courmont <remi.denis-courmont@nokia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

UBIFS: restrict world-writable debugfs files

commit 8c559d30b4e59cf6994215ada1fe744928f494bf upstream.

Don't allow everybody to dump sensitive information about filesystems.

Signed-off-by: Vasiliy Kulikov <segoon@openwall.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Andi Kleen <ak@linux.intel.com>

video: sn9c102: world-wirtable sysfs files

commit 14ddc3188d50855ae2a419a6aced995e2834e5d4 upstream.

Don't allow everybody to change video settings.

Signed-off-by: Vasiliy Kulikov <segoon@openwall.com>
Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Acked-by: Luca Risolia <luca.risolia@studio.unibo.it>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Andi Kleen <ak@linux.intel.com>

cifs: always do is_path_accessible check in cifs_mount

commit 70945643722ffeac779d2529a348f99567fa5c33 upstream.

Currently, we skip doing the is_path_accessible check in cifs_mount if
there is no prefixpath. I have a report of at least one server however
that allows a TREE_CONNECT to a share that has a DFS referral at its
root. The reporter in this case was using a UNC that had no prefixpath,
so the is_path_accessible check was not triggered and the box later hit
a BUG() because we were chasing a DFS referral on the root dentry for
the mount.

This patch fixes this by removing the check for a zero-length
prefixpath.  That should make the is_path_accessible check be done in
this situation and should allow the client to chase the DFS referral at
mount time instead.

Reported-and-Tested-by: Yogesh Sharma <ysharma@cymer.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Andi Kleen <ak@linux.intel.com>

xfs: zero proper structure size for geometry calls

commit af24ee9ea8d532e16883251a6684dfa1be8eec29 upstream.

Commit 493f3358cb289ccf716c5a14fa5bb52ab75943e5 added this call to
xfs_fs_geometry() in order to avoid passing kernel stack data back
to user space:

+       memset(geo, 0, sizeof(*geo));

Unfortunately, one of the callers of that function passes the
address of a smaller data type, cast to fit the type that
xfs_fs_geometry() requires.  As a result, this can happen:

Kernel panic - not syncing: stack-protector: Kernel stack is corrupted
in: f87aca93

Pid: 262, comm: xfs_fsr Not tainted 2.6.38-rc6-493f3358cb2+ #1
Call Trace:

[<c12991ac>] ? panic+0x50/0x150
[<c102ed71>] ? __stack_chk_fail+0x10/0x18
[<f87aca93>] ? xfs_ioc_fsgeometry_v1+0x56/0x5d [xfs]

Fix this by fixing that one caller to pass the right type and then
copy out the subset it is interested in.

Note: This patch is an alternative to one originally proposed by
Eric Sandeen.

Reported-by: Jeffrey Hundstad <jeffrey.hundstad@mnsu.edu>
Signed-off-by: Alex Elder <aelder@sgi.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Tested-by: Jeffrey Hundstad <jeffrey.hundstad@mnsu.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

net: fix rds_iovec page count overflow

commit 1b1f693d7ad6d193862dcb1118540a030c5e761f upstream.

As reported by Thomas Pollet, the rdma page counting can overflow.  We
get the rdma sizes in 64-bit unsigned entities, but then limit it to
UINT_MAX bytes and shift them down to pages (so with a possible "+1" for
an unaligned address).

So each individual page count fits comfortably in an 'unsigned int' (not
even close to overflowing into signed), but as they are added up, they
might end up resulting in a signed return value. Which would be wrong.

Catch the case of tot_pages turning negative, and return the appropriate
error code.

Reported-by: Thomas Pollet <thomas.pollet@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Andy Grover <andy.grover@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
[v2: nr is unsigned in the old code]
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Acked-by: Tim Gardner <tim.gardner@canonical.com>
Acked-by: Brad Figg <brad.figg@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

CAN: Use inode instead of kernel address for /proc file

commit 9f260e0efa4766e56d0ac14f1aeea6ee5eb8fe83 upstream.

Since the socket address is just being used as a unique identifier, its
inode number is an alternative that does not leak potentially sensitive
information.

CC-ing stable because MITRE has assigned CVE-2010-4565 to the issue.

Signed-off-by: Dan Rosenberg <drosenberg@vsecurity.com>
Acked-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Moritz Muehlenhoff <jmm@debian.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

irda: prevent integer underflow in IRLMP_ENUMDEVICES

commit fdac1e0697356ac212259f2147aa60c72e334861 upstream.

If the user-provided len is less than the expected offset, the
IRLMP_ENUMDEVICES getsockopt will do a copy_to_user() with a very large
size value.  While this isn't be a security issue on x86 because it will
get caught by the access_ok() check, it may leak large amounts of kernel
heap on other architectures.  In any event, this patch fixes it.

Signed-off-by: Dan Rosenberg <drosenberg@vsecurity.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Moritz Muehlenhoff <jmm@debian.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

inet_diag: Make sure we actually run the same bytecode we audited.

commit 22e76c849d505d87c5ecf3d3e6742a65f0ff4860 upstream.

We were using nlmsg_find_attr() to look up the bytecode by attribute when
auditing, but then just using the first attribute when actually running
bytecode. So, if we received a message with two attribute elements, where only
the second had type INET_DIAG_REQ_BYTECODE, we would validate and run different
bytecode strings.

Fix this by consistently using nlmsg_find_attr everywhere.

[AK: Add const to nlmsg_find_attr to fix new warning]

Signed-off-by: Nelson Elhage <nelhage@ksplice.com>
Signed-off-by: Thomas Graf <tgraf@infradead.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
[jmm: Slightly adapted to apply against 2.6.32]
Cc: Moritz Muehlenhoff <jmm@debian.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

net: tipc: fix information leak to userland

commit 88f8a5e3e7defccd3925cabb1ee4d3994e5cdb52 upstream.

Structure sockaddr_tipc is copied to userland with padding bytes after
"id" field in union field "name" unitialized.  It leads to leaking of
contents of kernel stack memory.  We have to initialize them to zero.

Signed-off-by: Vasiliy Kulikov <segooon@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Moritz Muehlenhoff <jmm@debian.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

nfsd: fix auth_domain reference leak on nlm operations

commit 954032d2527f2fce7355ba70709b5e143d6b686f upstream.

This was noticed by users who performed more than 2^32 lock operations
and hence made this counter overflow (eventually leading to
use-after-free's).  Setting rq_client to NULL here means that it won't
later get auth_domain_put() when it should be.

Appears to have been introduced in 2.5.42 by "[PATCH] kNFSd: Move auth
domain lookup into svcauth" which moved most of the rq_client handling
to common svcauth code, but left behind this one line.

Cc: Neil Brown <neilb@suse.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Andi Kleen <ak@linux.intel.com>

ext4: fix credits computing for indirect mapped files

commit 5b41395fcc0265fc9f193aef9df39ce49d64677c upstream.

When writing a contiguous set of blocks, two indirect blocks could be
needed depending on how the blocks are aligned, so we need to increase
the number of credits needed by one.

[ Also fixed a another bug which could further underestimate the
  number of journal credits needed by 1; the code was using integer
  division instead of DIV_ROUND_UP() -- tytso]

Signed-off-by: Yongqiang Yang <xiaoqiangnk@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Andi Kleen <ak@linux.intel.com>

atm/solos-pci: Don't include frame pseudo-header on transmit hex-dump

commit 18b429e74eeafe42e947b1b0f9a760c7153a0b5c upstream.

Omit pkt_hdr preamble when dumping transmitted packet as hex-dump;
we can pull this up because the frame has already been sent, and
dumping it is the last thing we do with it before freeing it.

Also include the size, vpi, and vci in the debug as is done on
receive.

Use "port" consistently instead of "device" intermittently.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Andi Kleen <ak@linux.intel.com>

Squashfs: handle corruption of directory structure

commit 44cff8a9ee8a974f9e931df910688e7fc1f0b0f9 upstream.

Handle the rare case where a directory metadata block is uncompressed and
corrupted, leading to a kernel oops in directory scanning (memcpy).
Normally corruption is detected at the decompression stage and dealt with
then, however, this will not happen if:

- metadata isn't compressed (users can optionally request no metadata
  compression), or
- the compressed metadata block was larger than the original, in which
  case the uncompressed version was used, or
- the data was corrupt after decompression

This patch fixes this by adding some sanity checks against known maximum
values.

Signed-off-by: Phillip Lougher <phillip@lougher.demon.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Andi Kleen <ak@linux.intel.com>

x86, microcode, AMD: Extend ucode size verification

Upstream commit: 44d60c0f5c58c2168f31df9a481761451840eb54

The different families have a different max size for the ucode patch,
adjust size checking to the family we're running on. Also, do not
vzalloc the max size of the ucode but only the actual size that is
passed on from the firmware loader.

Cc: <stable@kernel.org>
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Andi Kleen <ak@linux.intel.com>

gro: reset skb_iif on reuse

commit 6d152e23ad1a7a5b40fef1f42e017d66e6115159 upstream.

Like Herbert's change from a few days ago:

66c46d741e2e60f0e8b625b80edb0ab820c46d7a gro: Reset dev pointer on reuse

this may not be necessary at this point, but we should still clean up
the skb->skb_iif.  If not we may end up with an invalid valid for
skb->skb_iif when the skb is reused and the check is done in
__netif_receive_skb.

Signed-off-by: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Brandon Philips <bphilips@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Andi Kleen <ak@linux.intel.com>

gro: Reset dev pointer on reuse

commit 66c46d741e2e60f0e8b625b80edb0ab820c46d7a upstream.

On older kernels the VLAN code may zero skb->dev before dropping
it and causing it to be reused by GRO.

Unfortunately we didn't reset skb->dev in that case which causes
the next GRO user to get a bogus skb->dev pointer.

This particular problem no longer happens with the current upstream
kernel due to changes in VLAN processing.

However, for correctness we should still reset the skb->dev pointer
in the GRO reuse function in case a future user does the same thing.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Brandon Philips <bphilips@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Andi Kleen <ak@linux.intel.com>

sound: oss: midi_synth: check get_user() return value

commit b3390ceab95601afc12213c3ec5551d3bc7b638f upstream.

get_user() may fail, if so return -EFAULT.

Signed-off-by: Kulikov Vasiliy <segooon@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Andi Kleen <ak@linux.intel.com>

sound/oss: remove offset from load_patch callbacks

commit b769f49463711205d57286e64cf535ed4daf59e9 upstream.

Was: [PATCH] sound/oss/midi_synth: prevent underflow, use of
uninitialized value, and signedness issue

The offset passed to midi_synth_load_patch() can be essentially
arbitrary.  If it's greater than the header length, this will result in
a copy_from_user(dst, src, negative_val).  While this will just return
-EFAULT on x86, on other architectures this may cause memory corruption.
Additionally, the length field of the sysex_info structure may not be
initialized prior to its use.  Finally, a signed comparison may result
in an unintentionally large loop.

On suggestion by Takashi Iwai, version two removes the offset argument
from the load_patch callbacks entirely, which also resolves similar
issues in opl3.  Compile tested only.

v3 adjusts comments and hopefully gets copy offsets right.

Signed-off-by: Dan Rosenberg <drosenberg@vsecurity.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Andi Kleen <ak@linux.intel.com>

econet: 4 byte infoleak to the network

commit 67c5c6cb8129c595f21e88254a3fc6b3b841ae8e upstream.

struct aunhdr has 4 padding bytes between 'pad' and 'handle' fields on
x86_64.  These bytes are not initialized in the variable 'ah' before
sending 'ah' to the network.  This leads to 4 bytes kernel stack
infoleak.

This bug was introduced before the git epoch.

Signed-off-by: Vasiliy Kulikov <segoon@openwall.com>
Acked-by: Phil Blundell <philb@gnu.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Andi Kleen <ak@linux.intel.com>

drivers/misc/ep93xx_pwm.c: world-writable sysfs files

commit deb187e72470b0382d4f0cb859e76e1ebc3a1082 upstream.

Don't allow everybody to change device settings.

Signed-off-by: Vasiliy Kulikov <segoon@openwall.com>
Acked-by: Hartley Sweeten <hartleys@visionengravers.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Matthieu Crapet <mcrapet@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

drivers/rtc/rtc-ds1511.c: world-writable sysfs nvram file

commit 49d50fb1c28738ef6bad0c2b87d5355a1653fed5 upstream.

Don't allow everybogy to write to NVRAM.

Signed-off-by: Vasiliy Kulikov <segoon@openwall.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Andy Sharp <andy.sharp@onstor.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

mfd: ab3100: world-writable debugfs *_priv files

commit f8a0697722d12a201588225999cfc8bfcbc82781 upstream.

Don't allow everybody to change device hardware registers.

Signed-off-by: Vasiliy Kulikov <segoon@openwall.com>
Acked-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Andi Kleen <ak@linux.intel.com>

ipv6: netfilter: ip6_tables: fix infoleak to userspace

commit 6a8ab060779779de8aea92ce3337ca348f973f54 upstream.

Structures ip6t_replace, compat_ip6t_replace, and xt_get_revision are
copied from userspace.  Fields of these structs that are
zero-terminated strings are not checked.  When they are used as argument
to a format string containing "%s" in request_module(), some sensitive
information is leaked to userspace via argument of spawned modprobe
process.

The first bug was introduced before the git epoch;  the second was
introduced in 3bc3fe5e (v2.6.25-rc1);  the third is introduced by
6b7d31fc (v2.6.15-rc1).  To trigger the bug one should have
CAP_NET_ADMIN.

Signed-off-by: Vasiliy Kulikov <segoon@openwall.com>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Andi Kleen <ak@linux.intel.com>

netfilter: ipt_CLUSTERIP: fix buffer overflow

commit 961ed183a9fd080cf306c659b8736007e44065a5 upstream.

'buffer' string is copied from userspace.  It is not checked whether it is
zero terminated.  This may lead to overflow inside of simple_strtoul().
Changli Gao suggested to copy not more than user supplied 'size' bytes.

It was introduced before the git epoch.  Files "ipt_CLUSTERIP/*" are
root writable only by default, however, on some setups permissions might be
relaxed to e.g. network admin user.

Signed-off-by: Vasiliy Kulikov <segoon@openwall.com>
Acked-by: Changli Gao <xiaosuo@gmail.com>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Andi Kleen <ak@linux.intel.com>

netfilter: arp_tables: fix infoleak to userspace

commit 42eab94fff18cb1091d3501cd284d6bd6cc9c143 upstream.

Structures ipt_replace, compat_ipt_replace, and xt_get_revision are
copied from userspace.  Fields of these structs that are
zero-terminated strings are not checked.  When they are used as argument
to a format string containing "%s" in request_module(), some sensitive
information is leaked to userspace via argument of spawned modprobe
process.

The first bug was introduced before the git epoch;  the second is
introduced by 6b7d31fc (v2.6.15-rc1);  the third is introduced by
6b7d31fc (v2.6.15-rc1).  To trigger the bug one should have
CAP_NET_ADMIN.

Signed-off-by: Vasiliy Kulikov <segoon@openwall.com>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Andi Kleen <ak@linux.intel.com>

netfilter: ip_tables: fix infoleak to userspace

commit 78b79876761b86653df89c48a7010b5cbd41a84a upstream.

Structures ipt_replace, compat_ipt_replace, and xt_get_revision are
copied from userspace.  Fields of these structs that are
zero-terminated strings are not checked.  When they are used as argument
to a format string containing "%s" in request_module(), some sensitive
information is leaked to userspace via argument of spawned modprobe
process.

The first and the third bugs were introduced before the git epoch; the
second was introduced in 2722971c (v2.6.17-rc1).  To trigger the bug
one should have CAP_NET_ADMIN.

Signed-off-by: Vasiliy Kulikov <segoon@openwall.com>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Andi Kleen <ak@linux.intel.com>

char/tpm: Fix unitialized usage of data buffer

commit 1309d7afbed112f0e8e90be9af975550caa0076b upstream.

This patch fixes information leakage to the userspace by initializing
the data buffer to zero.

Reported-by: Peter Huewe <huewe.external@infineon.com>
Signed-off-by: Peter Huewe <huewe.external@infineon.com>
Signed-off-by: Marcel Selhorst <m.selhorst@sirrix.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
[ Also removed the silly "* sizeof(u8)".  If that isn't 1, we have way
  deeper problems than a simple multiplication can fix.   - Linus ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Treat writes as new when holes span across page boundaries

commit 272b62c1f0f6f742046e45b50b6fec98860208a0 upstream.

When a hole spans across page boundaries, the next write forces
a read of the block. This could end up reading existing garbage
data from the disk in ocfs2_map_page_blocks. This leads to
non-zero holes. In order to avoid this, mark the writes as new
when the holes span across page boundaries.

Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.de>
Signed-off-by: jlbec <jlbec@evilplan.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Andi Kleen <ak@linux.intel.com>

Bluetooth: add support for Apple MacBook Pro 8,2

commit 63a8588debd4dc72becb9e27add9343c76301c7d upstream.

Just adding the vendor details makes it work fine.

Signed-off-by: Marc-Antoine Perennou <Marc-Antoine@Perennou.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Andi Kleen <ak@linux.intel.com>

Bluetooth: bnep: fix buffer overflow

commit 43629f8f5ea32a998d06d1bb41eefa0e821ff573 upstream.

Struct ca is copied from userspace.  It is not checked whether the "device"
field is NULL terminated.  This potentially leads to BUG() inside of
alloc_netdev_mqs() and/or information leak by creating a device with a name
made of contents of kernel stack.

Signed-off-by: Vasiliy Kulikov <segoon@openwall.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Andi Kleen <ak@linux.intel.com>

bridge: netfilter: fix information leak

commit d846f71195d57b0bbb143382647c2c6638b04c5a upstream.

Struct tmp is copied from userspace.  It is not checked whether the "name"
field is NULL terminated.  This may lead to buffer overflow and passing
contents of kernel stack as a module name to try_then_request_module() and,
consequently, to modprobe commandline.  It would be seen by all userspace
processes.

Signed-off-by: Vasiliy Kulikov <segoon@openwall.com>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Andi Kleen <ak@linux.intel.com>

Bluetooth: sco: fix information leak to userspace

commit c4c896e1471aec3b004a693c689f60be3b17ac86 upstream.

struct sco_conninfo has one padding byte in the end.  Local variable
cinfo of type sco_conninfo is copied to userspace with this uninizialized
one byte, leading to old stack contents leak.

Signed-off-by: Vasiliy Kulikov <segoon@openwall.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Andi Kleen <ak@linux.intel.com>

b43: allocate receive buffers big enough for max frame len + offset

commit c85ce65ecac078ab1a1835c87c4a6319cf74660a upstream.

Otherwise, skb_put inside of dma_rx can fail...

https://bugzilla.kernel.org/show_bug.cgi?id=32042

Signed-off-by: John W. Linville <linville@tuxdriver.com>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Andi Kleen <ak@linux.intel.com>

p54usb: IDs for two new devices

commit 220107610c7c2c9703e09eb363e8ab31025b9315 upstream.

Reported-by: Mark Davis [via p54/devices wiki]
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Andi Kleen <ak@linux.intel.com>

mm: avoid wrapping vm_pgoff in mremap()

commit 982134ba62618c2d69fbbbd166d0a11ee3b7e3d8 upstream.

The normal mmap paths all avoid creating a mapping where the pgoff
inside the mapping could wrap around due to overflow.  However, an
expanding mremap() can take such a non-wrapping mapping and make it
bigger and cause a wrapping condition.

Noticed by Robert Swiecki when running a system call fuzzer, where it
caused a BUG_ON() due to terminally confusing the vma_prio_tree code.  A
vma dumping patch by Hugh then pinpointed the crazy wrapped case.

Reported-and-tested-by: Robert Swiecki <robert@swiecki.net>
Acked-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Andi Kleen <ak@linux.intel.com>

quota: Don't write quota info in dquot_commit()

commit b03f24567ce7caf2420b8be4c6eb74c191d59a91 upstream.

There's no reason to write quota info in dquot_commit(). The writing is a
relict from the old days when we didn't have dquot_acquire() and
dquot_release() and thus dquot_commit() could have created / removed quota
structures from the file. These days dquot_commit() only updates usage counters
/ limits in quota structure and thus there's no need to write quota info.

This also fixes an issue with journaling filesystem which didn't reserve
enough space in the transaction for write of quota info (it could have been
dirty at the time of dquot_commit() because of a race with other operation
changing it).

Reported-and-tested-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Andi Kleen <ak@linux.intel.com>

UBIFS: fix debugging failure in dbg_check_space_info

commit 7da6443aca9be29c6948dcbd636ad50154d0bc0c upstream.

This patch fixes a debugging failure with which looks like this:
UBIFS error (pid 32313): dbg_check_space_info: free space changed from 6019344 to 6022654

The reason for this failure is described in the comment this patch adds
to the code. But in short - 'c->freeable_cnt' may be different before
and after re-mounting, and this is normal. So the debugging code should
make sure that free space calculations do not depend on 'c->freeable_cnt'.

A similar issue has been reported here:
http://lists.infradead.org/pipermail/linux-mtd/2011-April/034647.html

This patch should fix it.

For the -stable guys: this patch is only relevant for kernels 2.6.30
onwards.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Andi Kleen <ak@linux.intel.com>

UBIFS: fix oops on error path in read_pnode

commit 54acbaaa523ca0bd284a18f67ad213c379679e86 upstream.

Thanks to coverity which spotted that UBIFS will oops if 'kmalloc()'
in 'read_pnode()' fails and we dereference a NULL 'pnode' pointer
when we 'goto out'.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Andi Kleen <ak@linux.intel.com>

UBIFS: do not read flash unnecessarily

commit 8b229c76765816796eec7ccd428f03bd8de8b525 upstream.

This fix makes the 'dbg_check_old_index()' function return
immediately if debugging is disabled, instead of executing
incorrect 'goto out' which causes UBIFS to:

1. Allocate memory
2. Read the flash

On every commit. OK, we do not commit that often, but it is
still silly to do unneeded I/O anyway.

Credits to coverity for spotting this silly issue.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Andi Kleen <ak@linux.intel.com>

x86, mtrr, pat: Fix one cpu getting out of sync during resume

commit 84ac7cdbdd0f04df6b96153f7a79127fd6e45467 upstream.

On laptops with core i5/i7, there were reports that after resume
graphics workloads were performing poorly on a specific AP, while
the other cpu's were ok. This was observed on a 32bit kernel
specifically.

Debug showed that the PAT init was not happening on that AP
during resume and hence it contributing to the poor workload
performance on that cpu.

On this system, resume flow looked like this:

1. BP starts the resume sequence and we reinit BP's MTRR's/PAT
   early on using mtrr_bp_restore()

2. Resume sequence brings all AP's online

3. Resume sequence now kicks off the MTRR reinit on all the AP's.

4. For some reason, between point 2 and 3, we moved from BP
   to one of the AP's. My guess is that printk() during resume
   sequence is contributing to this. We don't see similar
   behavior with the 64bit kernel but there is no guarantee that
   at this point the remaining resume sequence (after AP's bringup)
   has to happen on BP.

5. set_mtrr() was assuming that we are still on BP and skipped the
   MTRR/PAT init on that cpu (because of 1 above)

6. But we were on an AP and this led to not reprogramming PAT
   on this cpu leading to bad performance.

Fix this by doing unconditional mtrr_if->set_all() in set_mtrr()
during MTRR/PAT init. This might be unnecessary if we are still
running on BP. But it is of no harm and will guarantee that after
resume, all the cpu's will be in sync with respect to the
MTRR/PAT registers.

Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
LKML-Reference: <1301438292-28370-1-git-send-email-eric@anholt.net>
Signed-off-by: Eric Anholt <eric@anholt.net>
Tested-by: Keith Packard <keithp@keithp.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Btrfs: Fix uninitialized root flags for subvolumes

commit 08fe4db170b4193603d9d31f40ebaf652d07ac9c upstream.

root_item->flags and root_item->byte_limit are not initialized when
a subvolume is created. This bug is not revealed until we added
readonly snapshot support - now you mount a btrfs filesystem and you
may find the subvolumes in it are readonly.

To work around this problem, we steal a bit from root_item->inode_item->flags,
and use it to indicate if those fields have been properly initialized.
When we read a tree root from disk, we check if the bit is set, and if
not we'll set the flag and initialize the two fields of the root item.

Reported-by: Andreas Philipp <philipp.andreas@gmail.com>
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Tested-by: Andreas Philipp <philipp.andreas@gmail.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

ROSE: prevent heap corruption with bad facilities

commit be20250c13f88375345ad99950190685eda51eb8 upstream.

When parsing the FAC_NATIONAL_DIGIS facilities field, it's possible for
a remote host to provide more digipeaters than expected, resulting in
heap corruption.  Check against ROSE_MAX_DIGIS to prevent overflows, and
abort facilities parsing on failure.

Additionally, when parsing the FAC_CCITT_DEST_NSAP and
FAC_CCITT_SRC_NSAP facilities fields, a remote host can provide a length
of less than 10, resulting in an underflow in a memcpy size, causing a
kernel panic due to massive heap corruption.  A length of greater than
20 results in a stack overflow of the callsign array.  Abort facilities
parsing on these invalid length values.

Signed-off-by: Dan Rosenberg <drosenberg@vsecurity.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Andi Kleen <ak@linux.intel.com>

ALSA: ens1371: fix Creative Ectiva support

commit 6ebb8a4a43e34f999ab36f27f972f3cd751cda4f upstream.

To make the EV1938 chip work, add a magic bit and an extra delay.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Tested-by: Tino Schmidt <mailtinoshomepage@gmx.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

ASoC: Explicitly say registerless widgets have no register

commit 0ca03cd7d0fa3bfbd56958136a10f19733c4ce12 upstream.

This stops code that handles widgets generically from attempting to access
registers for these widgets.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Andi Kleen <ak@linux.intel.com>

nilfs2: fix data loss in mmap page write for hole blocks

commit 34094537943113467faee98fe67c8a3d3f9a0a8b upstream.

From the result of a function test of mmap, mmap write to shared pages
turned out to be broken for hole blocks.  It doesn't write out filled
blocks and the data will be lost after umount.  This is due to a bug
that the target file is not queued for log writer when filling hole
blocks.

Also, nilfs_page_mkwrite function exits normal code path even after
successfully filled hole blocks due to a change of block_page_mkwrite
function; just after nilfs was merged into the mainline,
block_page_mkwrite() started to return VM_FAULT_LOCKED instead of zero
by the patch "mm: close page_mkwrite races" (commit:
b827e496c893de0c).  The current nilfs_page_mkwrite() is not handling
this value properly.

This corrects nilfs_page_mkwrite() and will resolve the data loss
problem in mmap write.

[This should be applied to every kernel since 2.6.30 but a fix is
 needed for 2.6.37 and prior kernels]

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Tested-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

irda: prevent heap corruption on invalid nickname

commit d50e7e3604778bfc2dc40f440e0742dbae399d54 upstream.

Invalid nicknames containing only spaces will result in an underflow in
a memcpy size calculation, subsequently destroying the heap and
panicking.

v2 also catches the case where the provided nickname is longer than the
buffer size, which can result in controllable heap corruption.

Signed-off-by: Dan Rosenberg <drosenberg@vsecurity.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Andi Kleen <ak@linux.intel.com>