geneve: fix incorrect setting of UDP checksum flag

[ Upstream commit 5e0740c445e6ae4026f5e52456ff8d0be9725183 ]

Creating a geneve link with 'udpcsum' set results in a creation of link
for which UDP checksum will NOT be computed on outbound packets, as can
be seen below.

11: gen0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN
    link/ether c2:85:27:b6:b4:15 brd ff:ff:ff:ff:ff:ff promiscuity 0
    geneve id 200 remote 192.168.13.1 dstport 6081 noudpcsum

Similarly, creating a link with 'noudpcsum' set results in a creation
of link for which UDP checksum will be computed on outbound packets.

Fixes: 9b4437a5b870 ("geneve: Unify LWT and netdev handling.")
Signed-off-by: Girish Moodalbail <girish.moodalbail@oracle.com>
Acked-by: Pravin B Shelar <pshelar@ovn.org>
Acked-by: Lance Richardson <lrichard@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: macb: fix phy interrupt parsing

[ Upstream commit ae3696c167cc04d32634c4af82f43b446c5176b0 ]

Since 83a77e9ec415, the phydev irq is explicitly set to PHY_POLL when
there is no pdata. It doesn't work on DT enabled platforms because the
phydev irq is already set by libphy before.

Fixes: 83a77e9ec415 ("net: macb: Added PCI wrapper for Platform Driver.")
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: adjust skb->truesize in ___pskb_trim()

[ Upstream commit c21b48cc1bbf2f5af3ef54ada559f7fadf8b508b ]

Andrey found a way to trigger the WARN_ON_ONCE(delta < len) in
skb_try_coalesce() using syzkaller and a filter attached to a TCP
socket.

As we did recently in commit 158f323b9868 ("net: adjust skb->truesize in
pskb_expand_head()") we can adjust skb->truesize from ___pskb_trim(),
via a call to skb_condense().

If all frags were freed, then skb->truesize can be recomputed.

This call can be done if skb is not yet owned, or destructor is
sock_edemux().

Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tcp: do not underestimate skb->truesize in tcp_trim_head()

[ Upstream commit 7162fb242cb8322beb558828fd26b33c3e9fc805 ]

Andrey found a way to trigger the WARN_ON_ONCE(delta < len) in
skb_try_coalesce() using syzkaller and a filter attached to a TCP
socket over loopback interface.

I believe one issue with looped skbs is that tcp_trim_head() can end up
producing skb with under estimated truesize.

It hardly matters for normal conditions, since packets sent over
loopback are never truncated.

Bytes trimmed from skb->head should not change skb truesize, since
skb->head is not reallocated.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

macsec: dynamically allocate space for sglist

[ Upstream commit 5294b83086cc1c35b4efeca03644cf9d12282e5b ]

We call skb_cow_data, which is good anyway to ensure we can actually
modify the skb as such (another error from prior). Now that we have the
number of fragments required, we can safely allocate exactly that amount
of memory.

Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Acked-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sparc64: fix fault handling in NGbzero.S and GENbzero.S

commit 3c7f62212018b904ae17f5636ead18a4dca3a88f upstream.

When any of the functions contained in NGbzero.S and GENbzero.S
vector through *bzero_from_clear_user, we may end up taking a
fault when executing one of the store alternate address space
instructions. If this happens, the exception handler does not
restore the %asi register.

This commit fixes the issue by introducing a new exception
handler that ensures the %asi register is restored when
a fault is handled.

Orabug: 25577560

Signed-off-by: Dave Aldridge <david.j.aldridge@oracle.com>
Reviewed-by: Rob Gardner <rob.gardner@oracle.com>
Reviewed-by: Babu Moger <babu.moger@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda - Fix deadlock of controller device lock at unbinding

commit ab949d519601880fd46e8bc1445d6a453bf2dc09 upstream.

Imre Deak reported a deadlock of HD-audio driver at unbinding while
it's still in probing.  Since we probe the codecs asynchronously in a
work, the codec driver probe may still be kicked off while the
controller itself is being unbound.  And, azx_remove() tries to
process all pending tasks via cancel_work_sync() for fixing the other
races (see commit [0b8c82190c12: ALSA: hda - Cancel probe work instead
of flush at remove]), now we may meet a bizarre deadlock:

Unbind snd_hda_intel via sysfs:
  device_release_driver() ->
    device_lock(snd_hda_intel) ->
      azx_remove() ->
        cancel_work_sync(azx_probe_work)

azx_probe_work():
  codec driver probe() ->
     __driver_attach() ->
       device_lock(snd_hda_intel)

This deadlock is caused by the fact that both device_release_driver()
and driver_probe_device() take both the device and its parent locks at
the same time.  The codec device sets the controller device as its
parent, and this lock is taken before the probe() callback is called,
while the controller remove() callback gets called also with the same
lock.

In this patch, as an ugly workaround, we unlock the controller device
temporarily during cancel_work_sync() call.  The race against another
bind call should be still suppressed by the parent's device lock.

Reported-by: Imre Deak <imre.deak@intel.com>
Fixes: 0b8c82190c12 ("ALSA: hda - Cancel probe work instead of flush at remove")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: ptlrpc: avoid warning on missing return

commit 74e3bb75315ce62a4567f2871276bab32802e8b4 upstream.

The newly added function triggers a harmless warning:

drivers/staging/lustre/lustre/ptlrpc/pack_generic.c: In function 'lustre_shrink_msg':
drivers/staging/lustre/lustre/ptlrpc/pack_generic.c:472:1: error: control reaches end of non-void function [-Werror=return-type]

This probably happens because LASSERTF() contains an 'unlikely()' that
sometimes prevents gcc from analysing the control flow correctly.
Adding a return statement here seems harmless and lets us keep that
unlikely().

Fixes: 96049bd1ecd0 ("staging: lustre: ptlrpc: embed highest XID in each request")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: emxx_udc: remove incorrect __init annotations

commit 4f3445067d5f78fb8d1970b02610f85c2f377ea4 upstream.

The probe function is not marked __init, but some other functions
are. This leads to a warning on older compilers (e.g. gcc-4.3),
and can cause executing freed memory when built with those
compilers:

WARNING: drivers/staging/emxx_udc/emxx_udc.o(.text+0x2d78): Section mismatch in reference from the function nbu2ss_drv_probe() to the function .init.text:nbu2ss_drv_contest_init()

This removes the annotations.

Fixes: 33aa8d45a4fe ("staging: emxx_udc: Add Emma Mobile USB Gadget driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wlan-ng: add missing byte order conversion

commit 2c474b8579e9b67ff72b2bcefce9f53c7f4469d4 upstream.

Conversion macros le16_to_cpu was removed and that caused new sparse warning

sparse output:
drivers/staging/wlan-ng/p80211netdev.c:241:44: warning: incorrect type in argument 2 (different base types)
drivers/staging/wlan-ng/p80211netdev.c:241:44:    expected unsigned short [unsigned] [usertype] fc
drivers/staging/wlan-ng/p80211netdev.c:241:44:    got restricted __le16 [usertype] fc

Fixes: 7ad82572348c ("staging:wlan-ng:Fix sparse warning")
Signed-off-by: Igor Pylypiv <igor.pylypiv@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/llite: move root_squash from sysfs to debugfs

commit 4c13990e35b9f053857d4ad83bf0f58e612ec414 upstream.

root_squash control got accidentally moved to sysfs instead of
debugfs, and the write side of it was also broken expecting a
userspace buffer.
It contains both uid and gid values in a single file, so debugfs
is a clear place for it.

Reported-by: Al Viro <viro@ZenIV.linux.org.uk>
Fixes: c948390f10ccc "fix inconsistencies of root squash feature"
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Reviewed-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

brcmfmac: Make skb header writable before use

commit 9cc4b7cb86cbcc6330a3faa8cd65268cd2d3c227 upstream.

The driver was making changes to the skb_header without
ensuring it was writable (i.e. uncloned).
This patch also removes some boiler plate header size
checking/adjustment code as that is also handled by the
skb_cow_header function used to make header writable.

Signed-off-by: James Hughes <james.hughes@raspberrypi.org>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

brcmfmac: Ensure pointer correctly set if skb data location changes

commit 455a1eb4654c24560eb9dfc634f29cba3d87601e upstream.

The incoming skb header may be resized if header space is
insufficient, which might change the data adddress in the skb.
Ensure that a cached pointer to that data is correctly set by
moving assignment to after any possible changes.

Signed-off-by: James Hughes <james.hughes@raspberrypi.org>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

MIPS: R2-on-R6 MULTU/MADDU/MSUBU emulation bugfix

commit d65e5677ad5b3a49c43f60ec07644dc1f87bbd2e upstream.

MIPS instructions MULTU, MADDU and MSUBU emulation requires registers HI/LO
to be converted to signed 32bits before 64bit sign extension on MIPS64.

Bug was found on running MIPS32 R2 test application on MIPS64 R6 kernel.

Fixes: b0a668fb2038 ("MIPS: kernel: mips-r2-to-r6-emul: Add R2 emulator for MIPS R6")
Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com>
Reported-by: Nikola.Veljkovic@imgtec.com
Cc: paul.burton@imgtec.com
Cc: yamada.masahiro@socionext.com
Cc: akpm@linux-foundation.org
Cc: andrea.gelmini@gelma.net
Cc: macro@imgtec.com
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/14043/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: smartpqi: fix time handling

commit ed10858eadd4988260c6bc7d75fc25176342b5a7 upstream.

When we have turned off RTC support, the smartpqi driver fails to build:

ERROR: "rtc_time64_to_tm" [drivers/scsi/smartpqi/smartpqi.ko] undefined!

This is easily avoided by using the generic 'struct tm' based helper rather
than the RTC specific one. While fixing this, I noticed that even though
the driver uses time64_t for storing seconds, it gets them from the
old 32-bit struct timeval. To address this, we can simplify the code
by calling ktime_get_real_seconds() directly.

Fixes: 6c223761eb54 ("smartpqi: initial commit of Microsemi smartpqi driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: mac_scsi: Fix MAC_SCSI=m option when SCSI=m

commit 2559a1ef688f933835912c731bed2254146a9b04 upstream.

The mac_scsi driver still gets disabled when SCSI=m. This should have
been fixed back when I enabled the tristate but I didn't see the bug.

Fixes: 6e9ae6d560e1 ("[PATCH] mac_scsi: Add module option to Kconfig")
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: qla2xxx: Fix crash in qla2xxx_eh_abort on bad ptr

commit 5f7c2beef819d9ea2d1b814edf6f5981420e9cf8 upstream.

After a Qlogic card breaks when initializing (test case), the system can
crash in qla2xxx_eh_abort if processing anything but a scsi command type
srb.

Fixes: 1535aa75a3d8 ("scsi: qla2xxx: fix invalid DMA access after command aborts in PCI device remove")
Signed-off-by: Bill Kuzeja <william.kuzeja@stratus.com>
Acked-By: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: qedi: fix build error without DEBUG_FS

commit bd571195c9535c0b074fc7cd1b541b93817ed647 upstream.

Without CONFIG_DEBUG_FS, we run into a link error:

drivers/scsi/qedi/qedi_iscsi.o: In function `qedi_ep_poll':
qedi_iscsi.c:(.text.qedi_ep_poll+0x134): undefined reference to `do_not_recover'
drivers/scsi/qedi/qedi_iscsi.o: In function `qedi_ep_disconnect':
qedi_iscsi.c:(.text.qedi_ep_disconnect+0x36c): undefined reference to `do_not_recover'
drivers/scsi/qedi/qedi_iscsi.o: In function `qedi_ep_connect':
qedi_iscsi.c:(.text.qedi_ep_connect+0x350): undefined reference to `do_not_recover'
drivers/scsi/qedi/qedi_fw.o: In function `qedi_tmf_work':
qedi_fw.c:(.text.qedi_tmf_work+0x3b4): undefined reference to `do_not_recover'

This defines the symbol as a constant in this case, as there is no way to
set it to anything other than zero without DEBUG_FS. In addition, I'm renaming
it to qedi_do_not_recover in order to put it into a driver specific namespace,
as "do_not_recover" is a really bad name for a kernel-wide global identifier
when it is used only in one driver.

Fixes: ace7f46ba5fd ("scsi: qedi: Add QLogic FastLinQ offload iSCSI driver framework.")
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Manish Rangankar <Manish.Rangankar@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: qedi: Fix possible memory leak in qedi_iscsi_update_conn()

commit 8b9b22ba75907dcced88c815a5427ec0b4298aec upstream.

'conn_info' is malloced in qedi_iscsi_update_conn() and should be freed
before leaving from the error handling cases, otherwise it will cause
memory leak.

Fixes: ace7f46ba5fd ("scsi: qedi: Add QLogic FastLinQ offload iSCSI driver framework.")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Acked-by: Manish Rangankar <Manish.Rangankar@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

serial: 8250_omap: Fix probe and remove for PM runtime

commit 4e0f5cc65098ea32a1e77baae74215b9bd5276b1 upstream.

Otherwise the interconnect related code implementing PM runtime will
produce these errors on a failed probe:

omap_uart 48066000.serial: omap_device: omap_device_enable() called from invalid state 1
omap_uart 48066000.serial: use pm_runtime_put_sync_suspend() in driver?

Note that we now also need to check for priv in omap8250_runtime_suspend()
as it has not yet been registered if probe fails. And we need to use
pm_runtime_put_sync() to properly idle the device like we already do
in omap8250_remove().

Fixes: 61929cf0169d ("tty: serial: Add 8250-core based omap driver")
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

phy: qcom-usb-hs: Add depends on EXTCON

commit 1a09b6a7c10e22c489a8b212dd6862b1fd9674ad upstream.

We get the following compile errors if EXTCON is enabled as a
module but this driver is builtin:

drivers/built-in.o: In function `qcom_usb_hs_phy_power_off':
phy-qcom-usb-hs.c:(.text+0x1089): undefined reference to `extcon_unregister_notifier'
drivers/built-in.o: In function `qcom_usb_hs_phy_probe':
phy-qcom-usb-hs.c:(.text+0x11b5): undefined reference to `extcon_get_edev_by_phandle'
drivers/built-in.o: In function `qcom_usb_hs_phy_power_on':
phy-qcom-usb-hs.c:(.text+0x128e): undefined reference to `extcon_get_state'
phy-qcom-usb-hs.c:(.text+0x12a9): undefined reference to `extcon_register_notifier'

so let's mark this as needing to follow the modular status of
the extcon framework.

Fixes: 9994a33865f4 e2427b09ba929c2b9 (phy: Add support for Qualcomm's USB HS phy")
Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

clk: rockchip: add "," to mux_pll_src_apll_dpll_gpll_usb480m_p on rk3036

commit 9b1b23f03abdd25ffde8bbfe5824b89bc0448c28 upstream.

The mux_pll_src_apll_dpll_gpll_usb480m_p parent list was missing a ","
between the 3rd and 4th parent names, making them fall together and thus
lookups fail. Fix that.

Fixes: 5190c08b2989 ("clk: rockchip: add clock controller for rk3036")
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: io_edgeport: fix descriptor error handling

commit 3c0e25d883d06a1fbd1ad35257e8abaa57befb37 upstream.

Make sure to detect short control-message transfers and log an error
when reading incomplete manufacturer and boot descriptors.

Note that the default all-zero descriptors will now be used after a
short transfer is detected instead of partially initialised ones.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: ch341: fix modem-status handling

commit a0467a967f347842b30739aae636c44980265265 upstream.

The modem-status register was read as part of device configuration at
port_probe and then again at open (and reset-resume). During open (and
reset-resume) the MSR was read before submitting the interrupt URB,
something which could lead to an MSR-change going unnoticed when it
races with open (reset-resume).

Fix this by dropping the redundant reconfiguration of the port at every
open, and only read the MSR after the interrupt URB has been submitted.

Fixes: 664d5df92e88 ("USB: usb-serial ch341: support for DTR/RTS/CTS")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: mct_u232: fix modem-status error handling

commit 36356a669eddb32917fc4b5c2b9b8bf80ede69de upstream.

Make sure to detect short control-message transfers so that errors are
logged when reading the modem status at open.

Note that while this also avoids initialising the modem status using
uninitialised heap data, these bits could not leak to user space as they
are currently not used.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: quatech2: fix control-message error handling

commit 8c34cb8ddfe808d557b51da983ff10c02793beb2 upstream.

Make sure to detect short control-message transfers when fetching
modem and line state in open and when retrieving registers.

This specifically makes sure that an errno is returned to user space on
errors in TIOCMGET instead of a zero bitmask.

Also drop the unused getdevice function which also lacked appropriate
error handling.

Fixes: f7a33e608d9a ("USB: serial: add quatech2 usb to serial driver")
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: ftdi_sio: fix latency-timer error handling

commit e3e574ad85a208cb179f33720bb5f12b453de33c upstream.

Make sure to detect short responses when reading the latency timer to
avoid using stale buffer data.

Note that no heap data would currently leak through sysfs as
ASYNC_LOW_LATENCY is set by default.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: ark3116: fix open error handling

commit b631433b175f1002a31020e09bbfc2e5caecf290 upstream.

Fix open error handling which failed to detect errors when reading the
MSR and LSR registers, something which could lead to the shadow
registers being initialised from errnos.

Note that calling the generic close implementation is sufficient in the
error paths as the interrupt urb has not yet been submitted and the
register updates have not been made.

Fixes: f4c1e8d597d1 ("USB: ark3116: Make existing functions 16450-aware
and add close and release functions.")
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: ti_usb_3410_5052: fix control-message error handling

commit 39712e8bfa8d3aa6ce1e60fc9d62c9b076c17a30 upstream.

Make sure to detect and return an error on zero-length control-message
transfers when reading from the device.

This addresses a potential failure to detect an empty transmit buffer
during close.

Also remove a redundant check for short transfer when sending a command.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: io_edgeport: fix epic-descriptor handling

commit e4457d9798adb96272468e93da663de9bd0a4198 upstream.

Use a dedicated buffer for the DMA transfer and make sure to detect
short transfers to avoid parsing a corrupt descriptor.

Fixes: 6e8cf7751f9f ("USB: add EPIC support to the io_edgeport driver")
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: ssu100: fix control-message error handling

commit 1eac5c244f705182d1552a53e2f74e2775ed95d6 upstream.

Make sure to detect short control-message transfers rather than continue
with zero-initialised data when retrieving modem status and during
device initialisation.

Fixes: 52af95459939 ("USB: add USB serial ssu100 driver")
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: digi_acceleport: fix incomplete rx sanity check

commit 1b0aed2b1600f6e5c7b9acfbd610a4e351ef5232 upstream.

Make sure the received data has the required headers before parsing it.

Also drop the redundant urb-status check, which has already been handled
by the caller.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: keyspan_pda: fix receive sanity checks

commit c528fcb116e61afc379a2e0a0f70906b937f1e2c upstream.

Make sure to check for short transfers before parsing the receive buffer
to avoid acting on stale data.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: chipidea: Handle extcon events properly

commit a89b94b53371bbfa582787c2fa3378000ea4263d upstream.

We're currently emulating the vbus and id interrupts in the OTGSC
read API, but we also need to make sure that if we're handling
the events with extcon that we don't enable the interrupts for
those events in the hardware. Therefore, properly emulate this
register if we're using extcon, but don't enable the interrupts.
This allows me to get my cable connect/disconnect working
properly without getting spurious interrupts on my device that
uses an extcon for these two events.

Acked-by: Peter Chen <peter.chen@nxp.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Ivan T. Ivanov" <iivanov.xz@gmail.com>
Fixes: 3ecb3e09b042 ("usb: chipidea: Use extcon framework for VBUS and ID detect")
Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org>
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: chipidea: Only read/write OTGSC from one place

commit f60f8ccd54e03c1afafb2b20ceb029a0eaf7a134 upstream.

With the id and vbus detection done via extcon we need to make
sure we poll the status of OTGSC properly by considering what the
extcon is saying, and not just what the register is saying. Let's
move this hw_wait_reg() function to the only place it's used and
simplify it for polling the OTGSC register. Then we can make
certain we only use the hw_read_otgsc() API to read OTGSC, which
will make sure we properly handle extcon events.

Acked-by: Peter Chen <peter.chen@nxp.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Ivan T. Ivanov" <iivanov.xz@gmail.com>
Fixes: 3ecb3e09b042 ("usb: chipidea: Use extcon framework for VBUS and ID detect")
Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org>
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: host: ohci-exynos: Decrese node refcount on exynos_ehci_get_phy() error paths

commit 68bd6fc3cfa98ef253e17307ccafd8ef907b5556 upstream.

Returning from for_each_available_child_of_node() loop requires cleaning
up node refcount.  Error paths lacked it so for example in case of
deferred probe, the refcount of phy node was left increased.

Fixes: 6d40500ac9b6 ("usb: ehci/ohci-exynos: Fix of_node_put() for child when getting PHYs")
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: host: ehci-exynos: Decrese node refcount on exynos_ehci_get_phy() error paths

commit 3f6026b1dcb3c8ee71198c485a72ac674c6890dd upstream.

Returning from for_each_available_child_of_node() loop requires cleaning
up node refcount.  Error paths lacked it so for example in case of
deferred probe, the refcount of phy node was left increased.

Fixes: 6d40500ac9b6 ("usb: ehci/ohci-exynos: Fix of_node_put() for child when getting PHYs")
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: dwc2: host: use msleep() for long delay

commit d3fe81d2ccc41b355e494413115c0c7c18426fa1 upstream.

ulseep_range() uses hrtimers and provides no advantage over msleep()
for larger delays. Fix up the 100ms delays here passing the adjusted "min"
value to msleep(). This helps reduce the load on the hrtimer subsystem.

Link: http://lkml.org/lkml/2017/1/11/377
Fixes: commit 2938fc63e0c2 ("usb: dwc2: Properly account for the force mode delays")
Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Signed-off-by: John Youn <johnyoun@synopsys.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: nVMX: do not leak PML full vmexit to L1

commit ab007cc94ff9d82f5a8db8363b3becbd946e58cf upstream.

The PML feature is not exposed to guests so we should not be forwarding
the vmexit either.

This commit fixes BSOD 0x20001 (HYPERVISOR_ERROR) when running Hyper-V
enabled Windows Server 2016 in L1 on hardware that supports PML.

Fixes: 843e4330573c ("KVM: VMX: Add PML support in VMX")
Signed-off-by: Ladi Prosek <lprosek@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: nVMX: initialize PML fields in vmcs02

commit 1fb883bb827ee8efc1cc9ea0154f953f8a219d38 upstream.

L2 was running with uninitialized PML fields which led to incomplete
dirty bitmap logging. This manifested as all kinds of subtle erratic
behavior of the nested guest.

Fixes: 843e4330573c ("KVM: VMX: Add PML support in VMX")
Signed-off-by: Ladi Prosek <lprosek@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "KVM: nested VMX: disable perf cpuid reporting"

commit 0b4c208d443ba2af82b4c70f99ca8df31e9a0020 upstream.

This reverts commit bc6134942dbbf31c25e9bd7c876be5da81c9e1ce.

A CPUID instruction executed in VMX non-root mode always causes a
VM-exit, regardless of the leaf being queried.

Fixes: bc6134942dbb ("KVM: nested VMX: disable perf cpuid reporting")
Signed-off-by: Jim Mattson <jmattson@google.com>
[The issue solved by bc6134942dbb has been resolved with ff651cb613b4
 ("KVM: nVMX: Add nested msr load/restore algorithm").]
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: PPC: Book3S HV: Don't try to signal cpu -1

commit 3deda5e50c893be38c1b6b3a73f8f8fb5560baa4 upstream.

If the target vcpu for kvmppc_fast_vcpu_kick_hv() is not running on
any CPU, then we will have vcpu->arch.thread_cpu == -1, and as it
happens, kvmppc_fast_vcpu_kick_hv will call kvmppc_ipi_thread with
-1 as the cpu argument.  Although this is not meaningful, in the past,
before commit 1704a81ccebc ("KVM: PPC: Book3S HV: Use msgsnd for IPIs
to other cores on POWER9", 2016-11-18), it was harmless because CPU
-1 is not in the same core as any real CPU thread.  On a POWER9,
however, we don't do the "same core" check, so we were trying to
do a msgsnd to thread -1, which is invalid.  To avoid this, we add
a check to see that vcpu->arch.thread_cpu is >= 0 before calling
kvmppc_ipi_thread() with it.  Since vcpu->arch.thread_vcpu can change
asynchronously, we use READ_ONCE to ensure that the value we check is
the same value that we use as the argument to kvmppc_ipi_thread().

Fixes: 1704a81ccebc ("KVM: PPC: Book3S HV: Use msgsnd for IPIs to other cores on POWER9")
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/platform/intel-mid: Correct MSI IRQ line for watchdog device

commit 80354c29025833acd72ddac1ffa21c6cb50128cd upstream.

The interrupt line used for the watchdog is 12, according to the official
Intel Edison BSP code.

And indeed after fixing it we start getting an interrupt and thus the
watchdog starts working again:

  [  191.699951] Kernel panic - not syncing: Kernel Watchdog

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: David Cohen <david.a.cohen@linux.intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 78a3bb9e408b ("x86: intel-mid: add watchdog platform code for Merrifield")
Link: http://lkml.kernel.org/r/20170312150744.45493-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kprobes/x86: Fix kernel panic when certain exception-handling addresses are probed

commit 75013fb16f8484898eaa8d0b08fed942d790f029 upstream.

Fix to the exception table entry check by using probed address
instead of the address of copied instruction.

This bug may cause unexpected kernel panic if user probe an address
where an exception can happen which should be fixup by __ex_table
(e.g. copy_from_user.)

Unless user puts a kprobe on such address, this doesn't
cause any problem.

This bug has been introduced years ago, by commit:

  464846888d9a ("x86/kprobes: Fix a bug which can modify kernel code permanently").

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 464846888d9a ("x86/kprobes: Fix a bug which can modify kernel code permanently")
Link: http://lkml.kernel.org/r/148829899399.28855.12581062400757221722.stgit@devbox
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

platform/x86: intel_pmc_core: fix out-of-bounds accesses on stack

commit 4f24ecff0153047a4a8b53c31d8001ee79e1cab7 upstream.

pmc_core_mtpmc_link_status() an pmc_core_check_read_lock_bit() use
test_bit() on local 32-bit variable. This causes out-of-bounds
access since test_bit() expects object at least of 'unsigned long' size:

   BUG: KASAN: stack-out-of-bounds in pmc_core_probe+0x3aa/0x3b0
    Call Trace:
     __asan_report_load_n_noabort+0x5c/0x80
     pmc_core_probe+0x3aa/0x3b0
     local_pci_probe+0xf9/0x1e0
     pci_device_probe+0x27b/0x350
     driver_probe_device+0x419/0x830
     __driver_attach+0x15f/0x1d0
     bus_for_each_dev+0x129/0x1d0
     driver_attach+0x42/0x70
     bus_add_driver+0x385/0x690
     driver_register+0x1a9/0x3d0
     __pci_register_driver+0x1a2/0x290
     intel_pmc_core_driver_init+0x19/0x1b
     do_one_initcall+0x12e/0x280
     kernel_init_freeable+0x57c/0x623
     kernel_init+0x13/0x140
     ret_from_fork+0x2e/0x40

Fix this by open coding bit test. While at it, also refactor this code
a little bit.

Fixes: 173943b3dae5 ("platform/x86: intel_pmc_core: ModPhy core lanes pg status")
Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
[andy: reverted not related changes, used BIT() macro]
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

clk: Make x86/ conditional on CONFIG_COMMON_CLK

commit f35b6542c3ac3f28056d298348a81f7d56d3a041 upstream.

Fix Makefile for x86 support, dependency on CONFIG_COMMON_CLK
was not explicit

Fixes: 701190fd7419 ('clk: x86: add support for Lynxpoint LPSS clocks')
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/mpx: Re-add MPX to selftests Makefile

commit e64d5fbe56259c94df504af8ce804cfc6a022adb upstream.

Ingo pointed out that the MPX tests were no longer in the selftests
Makefile.  It appears that I shot myself in the foot on this one
and accidentally removed them when I added the pkeys tests, probably
from bungling a merge conflict.

Reported-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 5f23f6d082a9 ("x86/pkeys: Add self-tests")
Link: http://lkml.kernel.org/r/20170201225629.C3070852@viggo.jf.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/pci-calgary: Fix iommu_free() comparison of unsigned expression >= 0

commit 68dee8e2f2cacc54d038394e70d22411dee89da2 upstream.

commit 8fd524b355da ("x86: Kill bad_dma_address variable") has killed
bad_dma_address variable and used instead of macro DMA_ERROR_CODE
which is always zero. Since dma_addr is unsigned, the statement

   dma_addr >= DMA_ERROR_CODE

is always true, and not needed.

arch/x86/kernel/pci-calgary_64.c: In function ‘iommu_free’:
arch/x86/kernel/pci-calgary_64.c:299:2: warning: comparison of unsigned expression >= 0 is always true [-Wtype-limits]
  if (unlikely((dma_addr >= DMA_ERROR_CODE) && (dma_addr < badend))) {

Fixes: 8fd524b355da ("x86: Kill bad_dma_address variable")
Signed-off-by: Nikola Pajkovsky <npajkovsky@suse.cz>
Cc: iommu@lists.linux-foundation.org
Cc: Jon Mason <jdmason@kudzu.us>
Cc: Muli Ben-Yehuda <mulix@mulix.org>
Link: http://lkml.kernel.org/r/7612c0f9dd7c1290407dbf8e809def922006920b.1479161177.git.npajkovsky@suse.cz
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/ioapic: Restore IO-APIC irq_chip retrigger callback

commit a9b4f08770b415f30f2fb0f8329a370c8f554aa3 upstream.

commit d32932d02e18 removed the irq_retrigger callback from the IO-APIC
chip and did not add it to the new IO-APIC-IR irq chip.

There is no harm because the interrupts are resent in software when the
retrigger callback is NULL, but it's less efficient. So restore them.

[ tglx: Massaged changelog ]

Fixes: d32932d02e18 ("x86/irq: Convert IOAPIC to use hierarchical irqdomain interfaces")
Signed-off-by: Ruslan Ruslichenko <rruslich@cisco.com>
Cc: xe-linux-external@cisco.com
Link: http://lkml.kernel.org/r/1484662432-13580-1-git-send-email-rruslich@cisco.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iwlwifi: mvm: fix accessing fw_id_to_mac_id

commit a95600294157ca7527ee7c70249fb53e09d8c566 upstream.

Access should be by rcu_dereference. Issue was found by sparse.

Fixes: 65e254821cee ("iwlwifi: mvm: use firmware station PM notification for AP_LINK_PS")
Signed-off-by: Sara Sharon <sara.sharon@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iwlwifi: mvm: writing zero bytes to debugfs causes a crash

commit 251fe09f13bfb54c1ede66ee8bf8ddd0061c4f7c upstream.

This is a static analysis fix.  The warning is:

drivers/net/wireless/intel/iwlwifi/mvm/fw-dbg.c:912 iwl_mvm_fw_dbg_collect()
warn: integer overflows 'sizeof(*desc) + len'

I guess this code is supposed to take a NUL character, but if we write
zero bytes then it tries to write -1 characters and crashes.

Fixes: c91b865cb14d ("iwlwifi: mvm: support description for user triggered fw dbg collection")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iwlwifi: mvm: synchronize firmware DMA paging memory

commit 4b70f07686d75d1eb5d956812cc810944e0b29b2 upstream.

When driver needs to access the contents of a streaming DMA buffer
without unmapping it it should call dma_sync_single_for_cpu().
Once the call has been made, the CPU "owns" the DMA buffer and can
work with it as needed.
Before the device accesses the buffer, however, ownership should be
transferred back to it with dma_sync_single_for_device().
Both calls weren't performed by the driver, resulting with odd paging
errors on some platforms. Fix it.

Fixes: a6c4fb4441f4 ("iwlwifi: mvm: Add FW paging mechanism for the UMAC on PCI")
Signed-off-by: Sara Sharon <sara.sharon@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iwlwifi: mvm: fix references to first_agg_queue in DQA mode

commit c56108b58ab870892277940a1def0d6b153f3e26 upstream.

In DQA mode, first_agg_queue is initialized to
IWL_MVM_DQA_MIN_DATA_QUEUE. This causes two bugs in the tx response
flow:

1. When TX fails, we set IEEE80211_TX_STAT_AMPDU_NO_BACK regardless
   if we actually have aggregation open on the queue. This causes
   mac80211 to send a BAR frame even though there is no aggregation
   open.
   Fix that by simply checking the AMPDU flag that is set on by
   mac80211 for AMPDU packets.

2. When reclaiming frames in aggregation mode, we reclaim based on
   scheduler ssn and not the SN.
   The reason is that scheduler ssn may be ahead of SN due to a hole
   in the BA window that was filled.
   However, if we have aggregations open on IWL_MVM_DQA_BSS_CLIENT_QUEUE
   the reclaim flow will still go to the code of non-aggregation
   instead of the aggregation code since IWL_MVM_DQA_BSS_CLIENT_QUEUE
   is smaller than IWL_MVM_DQA_MIN_DATA_QUEUE, although it is a valid
   aggregation queue.
   Fix that by always using the aggregation reclaim code by default in
   DQA mode (currently it is implicitly used by default for all queues
   except the reserved BSS queue).

Fixes: cf961e16620f ("iwlwifi: mvm: support dqa-mode agg on non-shared queue")
Signed-off-by: Sara Sharon <sara.sharon@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iwlwifi: mvm: fix pending frame counter calculation

commit 94c3e614df2117626fccfac8f821c66e30556384 upstream.

In DQA mode the check whether to decrement the pending frames
counter relies on the tid status and not on the txq id.
This may result in an inconsistent state of the pending frames
counter in case frame is queued on a non aggregation queue but
with this TID, and will be followed by a failure to remove the
station and later on SYSASSERT 0x3421 when trying to remove the
MAC.
Such frames are for example bar and qos NDPs.
Fix it by aligning the condition of incrementing the counter
with the condition of decrementing it - rely on TID state for
DQA mode.
Also, avoid internal error like this affecting station removal
for DQA mode - since we can know for sure it is an internal
error.

Fixes: cf961e16620f ("iwlwifi: mvm: support dqa-mode agg on non-shared queue")
Signed-off-by: Sara Sharon <sara.sharon@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iwlwifi: mvm/pcie: adjust A-MSDU tx_cmd length in PCIe

commit 05e5a7e58d3f8f597ebe6f78aaa13a2656b78239 upstream.

Instead of setting the tx_cmd length in the mvm code, which is
complicated by the fact that DQA may want to temporarily store
the SKB on the side, adjust the length in the PCIe code which
also knows about this since it's responsible for duplicating
all those headers that are account for in this code.

As the PCIe code already relies on the tx_cmd->len field, this
doesn't really introduce any new dependencies.

To make this possible we need to move the memcpy() of the TX
command until after it was updated.

This does even simplify the code though, since the PCIe code
already does a lot of manipulations to build A-MSDUs correctly
and changing the length becomes a simple operation to see how
much was added/removed, rather than predicting it.

Fixes: 24afba7690e4 ("iwlwifi: mvm: support bss dynamic alloc/dealloc of queues")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iwlwifi: mvm: Use aux queue for offchannel frames in dqa

commit 6574dc943fc32a2fce69fab14891abca7eecb67c upstream.

Since offchannel activity doesn't always require a BSS, e.g. ANQP
sessions, offchannel frames should not use the BSS queue, because it
might not be initialized.
Use the auxilary queue instead

Fixes: e3118ad74d7e ("iwlwifi: mvm: support tdls in dqa mode")
Signed-off-by: Beni Lev <beni.lev@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iwlwifi: mvm: fix reorder timer re-arming

commit 5351f9ab254c30d41659924265f1ecd7b4758d9e upstream.

When NSSN is behind the reorder buffer due to timeout
the reorder timer isn't getting re-armed until NSSN
catches up. Fix it.

Fixes: 0690405fef29 ("iwlwifi: mvm: add reorder timeout per frame")
Signed-off-by: Sara Sharon <sara.sharon@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iwlwifi: pcie: fix the set of DMA memory mask

commit 2c6262b754f3c3338cb40b23880a3ac1f4693b25 upstream.

Our 9000 device supports 64 bit DMA address for RX only, and
not for TX.
Setting DMA mask to 64 for the whole device is erroneous - we
can do it only for a000 devices where device is capable of
both RX & TX DMA with 64 bit address space.

Fixes: 96a6497bc3ed ("iwlwifi: pcie: add 9000 series multi queue rx DMA support")
Signed-off-by: Sara Sharon <sara.sharon@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iwlwifi: pcie: trans: Remove unused 'shift_param'

commit 3ce4a03852d6dd3fd28c2fb2ee9f89bb9ccf9a9b upstream.

shift_param is defined and set in iwl_pcie_load_cpu_sections but not
used. Fix this to avoid -Wunused-but-set-variable warning.

The code using it turned into dead code with commit dcab8ecd5617
("iwlwifi: mvm: support ucode load for family_8000 B0 only") which
added a separate function iwl_pcie_load_given_ucode_8000 (then 8000b)
for IWL_DEVICE_FAMILY_8000. Commit 76f8c0e17edc ("iwlwifi: pcie:
remove dead code") removed the dead code but left shift_param as is.

iwlwifi/pcie/trans.c: In function ‘iwl_pcie_load_cpu_sections’:
iwlwifi/pcie/trans.c:871:6: warning: variable ‘shift_param’ set but not used [-Wunused-but-set-variable]

Fixes: dcab8ecd5617 ("iwlwifi: mvm: support ucode load for family_8000 B0 only")
Fixes: 76f8c0e17edc ("iwlwifi: pcie: remove dead code")
Signed-off-by: Kirtika Ruchandani <kirtika@google.com>
Cc: Sara Sharon <sara.sharon@intel.com>
Cc: Luca Coelho <luciano.coelho@intel.com>
Cc: Liad Kaufman <liad.kaufman@intel.com>
Cc: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
[removed some unnecessary braces]
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iwlwifi: pcie: don't increment / decrement a bool

commit 04fa3e680b4dd2fdd11d0152fb9b6067e7aac140 upstream.

David reported that the code I added uses the decrement
and increment operator on a boolean variable.

Fix that.

Fixes: 0cd58eaab148 ("iwlwifi: pcie: allow the op_mode to block the tx queues")
Reported-by: David Binderman <dcb314@hotmail.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iwlwifi: mvm: overwrite skb info later

commit bd05a5bd6b11d7fd26a668de83c5cb996de05f8f upstream.

We don't really need clear the skb's status area nor store the
dev_cmd into it until we really commit to the frame by handing
it to the transport - defer those operations until just before
we do that.

This doesn't entirely fix the bug with frames not getting sent
out after having been deferred due to DQA, because it doesn't
restore the info->driver_data[0] place that was already set to
zero (or another value) by the A-MSDU logic.

Fixes: 24afba7690e4 ("iwlwifi: mvm: support bss dynamic alloc/dealloc of queues")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iwlwifi: mvm: don't restart HW if suspend fails with unified image

commit bac453ab3745eaa64137ea6e77e009b45954f0ae upstream.

For unified images, we shouldn't restart the HW if suspend fails.  The
only reason for restarting the HW with non-unified images is to go
back to the D0 image.

Fixes: 23ae61282b88 ("iwlwifi: mvm: Do not switch to D3 image on suspend")
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iwlwifi: fix MODULE_FIRMWARE for 6030

commit d8320d75b59ecdc1b8e60ac793d3a54d84333a18 upstream.

IWL6000G2B_UCODE_API_MAX is not defined. ucode_api_max of
IWL_DEVICE_6030 uses IWL6000G2_UCODE_API_MAX. Use this also for
MODULE_FIRMWARE.

Fixes: 9d9b21d1b616 ("iwlwifi: remove IWL_*_UCODE_API_OK")
Signed-off-by: Jürg Billeter <j@bitron.ch>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iwlwifi: mvm: properly check for transport data in dump

commit c2e27e16f2411155b906db201b7e478144034ffe upstream.

When copying from vmalloc'ed memory to the SG list, don't crash
if the transport didn't provide any data.

Fixes: 7e62a699aafb ("iwlwifi: mvm: use dev_coredumpsg()")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mwifiex: set adapter->dev before starting to use mwifiex_dbg()

commit ba1c7e45ec224cc8d2df33ecaee1946d48e79231 upstream.

The mwifiex_dbg() log handler utilizes the struct device in
adapter->dev. Without it, it decides not to print anything.

As of commit 2e02b5814217 ("mwifiex: Allow mwifiex early access to device
structure"), we started assigning that pointer only after we finished
mwifiex_register() -- this effectively neuters any mwifiex_dbg() logging
done before this point.

Let's move the device assignment into mwifiex_register().

Fixes: 2e02b5814217 ("mwifiex: Allow mwifiex early access to device structure")
Cc: Rajat Jain <rajatja@google.com>
Signed-off-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mwifiex: don't enable/disable IRQ 0 during suspend/resume

commit 2447e2cad75239ae407c0f98acf12511354208c5 upstream.

If we don't have an out-of-band wakeup IRQ configured through DT (as
most platforms don't), then we fall out of this function with
'irq_wakeup == 0'. Other code (e.g., mwifiex_disable_wake() and
mwifiex_enable_wake()) treats 'irq_wakeup >= 0' as a valid IRQ, and so
we end up calling {enable,disable}_irq() on IRQ 0.

That seems bad, so let's not do that.

Same problem as fixed in this patch:

https://patchwork.kernel.org/patch/9531693/
[PATCH v2 2/3] btmrvl: set irq_bt to -1 when failed to parse it

with the difference that:
(a) this one is actually a regression and
(b) this affects both device tree and non-device-tree systems

While fixing the regression, also drop the verbosity on the parse
failure, so we don't see this when a DT node is present but doesn't have
an interrupt property (this is perfectly legal):

[   21.999000] mwifiex_pcie 0000:01:00.0: fail to parse irq_wakeup from device tree

Fixes: 853402a00823 ("mwifiex: Enable WoWLAN for both sdio and pcie")
Signed-off-by: Brian Norris <briannorris@chromium.org>
Acked-by: Rajat Jain <rajatja@google.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mwifiex: Avoid skipping WEP key deletion for AP

commit a5b60de6972decc6b50a39abb376077c3c3621c8 upstream.

This patch fixes the issue specific to AP. AP is started with WEP
security and external station is connected to it. Data path works
in this case. Now if AP is restarted with WPA/WPA2 security,
station is able to connect but ping fails.

Driver skips the deletion of WEP keys if interface type is AP.
Removing that redundant check resolves the issue.

Fixes: e57f1734d87a ("mwifiex: add key material v2 support")
Signed-off-by: Ganapathi Bhat <gbhat@marvell.com>
Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mwifiex: remove redundant dma padding in AMSDU

commit 5f0a221f59ad6b72202ef9c6e232086de8c336f2 upstream.

We already ensure 64 bytes alignment and add padding if required
during skb_aggr allocation.

Alignment and padding in mwifiex_11n_form_amsdu_txpd() is redundant.
We may end up accessing more data than allocated size with this.

This patch fixes following issue by removing redundant padding.

[  370.241338] skbuff: skb_over_panic: text:ffffffffc046946a len:3550
put:72 head:ffff880000110000 data:ffff8800001100e4 tail:0xec2 end:0xec0 dev:<NULL>
[  370.241374] ------------[ cut here ]------------
[  370.241382] kernel BUG at net/core/skbuff.c:104!
  370.244032] Call Trace:
[  370.244041]  [<ffffffff8c3df5ec>] skb_put+0x44/0x45
[  370.244055]  [<ffffffffc046946a>]
mwifiex_11n_aggregate_pkt+0x1e9/0xa50 [mwifiex]
[  370.244067]  [<ffffffffc0467c16>] mwifiex_wmm_process_tx+0x44a/0x6b7
[mwifiex]
[  370.244074]  [<ffffffffc0411eb8>] ? 0xffffffffc0411eb8
[  370.244084]  [<ffffffffc046116b>] mwifiex_main_process+0x476/0x5a5
[mwifiex]
[  370.244098]  [<ffffffffc0461298>] mwifiex_main_process+0x5a3/0x5a5
[mwifiex]
[  370.244113]  [<ffffffff8be7e9ff>] process_one_work+0x1a4/0x309
[  370.244123]  [<ffffffff8be7f4ca>] worker_thread+0x20c/0x2ee
[  370.244130]  [<ffffffff8be7f2be>] ? rescuer_thread+0x383/0x383
[  370.244136]  [<ffffffff8be7f2be>] ? rescuer_thread+0x383/0x383
[  370.244143]  [<ffffffff8be83742>] kthread+0x11c/0x124
[  370.244150]  [<ffffffff8be83626>] ? kthread_parkme+0x24/0x24
[  370.244157]  [<ffffffff8c4da1ef>] ret_from_fork+0x3f/0x70
[  370.244168]  [<ffffffff8be83626>] ? kthread_parkme+0x24/0x24

Fixes: 84b313b35f8158d ("mwifiex: make tx packet 64 byte DMA aligned")
Signed-off-by: Xinming Hu <huxm@marvell.com>
Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mwifiex: debugfs: Fix (sometimes) off-by-1 SSID print

commit 6183468a23fc6b6903f8597982017ad2c7fdefcf upstream.

Similar to commit fcd2042e8d36 ("mwifiex: printk() overflow with 32-byte
SSIDs"), we failed to account for the existence of 32-char SSIDs in our
debugfs code. Unlike in that case though, we zeroed out the containing
struct first, and I'm pretty sure we're guaranteed to have some padding
after the 'ssid.ssid' and 'ssid.ssid_len' fields (the struct is 33 bytes
long).

So, this is the difference between:

  # cat /sys/kernel/debug/mwifiex/mlan0/info
  ...
  essid="0123456789abcdef0123456789abcdef "
  ...

and the correct output:

  # cat /sys/kernel/debug/mwifiex/mlan0/info
  ...
  essid="0123456789abcdef0123456789abcdef"
  ...

Fixes: 5e6e3a92b9a4 ("wireless: mwifiex: initial commit for Marvell mwifiex driver")
Signed-off-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: dts: sun7i: lamobo-r1: Fix CPU port RGMII settings

commit 0cdefd5b5485ee6eb3512a75739d09a4090176ed upstream.

The CPU port of the BCM53125 is configured with RGMII (no delays) but
this should actually be RGMII with transmit delay (rgmii-txid) because
STMMAC takes care of inserting the transmitter delay. This fixes
occasional packet loss encountered.

Fixes: d7b9eaff5f0c ("ARM: dts: sun7i: Add BCM53125 switch nodes to the lamobo-r1 board")
Reported-by: Hartmut Knaack <knaack.h@gmx.de>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: dts: am57xx-idk: tpic2810 is on I2C bus, not SPI

commit f5432f01240ef69a391940d623b6a51768aefd65 upstream.

commit 50e95b6b854c ("ARM: dts: am57xx-idk: Add Industrial
output support") added the TPIC2810 device-tree node under
SPI bus instead of I2C1.

Fix it. Tested on AM572x IDK by driving on-board LEDs
connected to TPIC2810

Fixes: 50e95b6b854c ("ARM: dts: am57xx-idk: Add Industrial output support")
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Acked-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: OMAP3: Fix smartreflex platform data regression

commit 179125085bd4ca70e8e028913193a93653bd12f7 upstream.

Commit d9d9cec02835 ("ARM: OMAP2+: Remove legacy data from hwmod for
omap3") dropped platform data that should no longer be used as we're
booting with device tree. It turns out that smartreflex is still
using platform data and produces the following errors during probe:

smartreflex smartreflex.0: invalid resource
smartreflex smartreflex.0: omap_sr_probe: ioremap fail
smartreflex: probe of smartreflex.0 failed with error -22
smartreflex smartreflex.1: invalid resource
smartreflex smartreflex.1: omap_sr_probe: ioremap fail
smartreflex: probe of smartreflex.1 failed with error -22

Let's fix the regression by adding back the smartreflex hwmod data.
The long term is to update the smartreflex driver to use device tree
based probing.

Fixes: d9d9cec02835 ("ARM: OMAP2+: Remove legacy data from hwmod
for omap3")
Reported-by: Adam Ford <aford173@gmail.com>
Tested-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: OMAP5 / DRA7: Fix HYP mode boot for thumb2 build

commit 448c077eeb02240c430db2a2c3bf5285a4c65d66 upstream.

'adr' yields a data-pointer, not a function-pointer.

Fixes: 999f934de195 ("ARM: omap5/dra7xx: Enable booting secondary
CPU in HYP mode")
Signed-off-by: Matthijs van Duin <matthijsvanduin@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: dts: imx6sx-udoo-neo: Fix reboot hang

commit 12aff99723901bcc0e2a6a34343a4f62c371fdd9 upstream.

After issuing a 'reboot' command the imx6sx-udoo-neo board does not
reboot as expected and it just hangs instead.

In mainline kernel only LDO enabled mode is supported. Do not provide
arm-supply/soc-supply nodes in the device tree, so that the board operates
in LDO enabled mode and can then successfully reboot via watchdog.

Fixes: 76e691fc7653b85d39 ("ARM: dts: imx6sx: Add UDOO Neo support")
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Tested-by: Breno Lima <breno.lima@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: dts: NSP: GPIO reboot open-source

commit acfa28b3649ec07775efaac0c00de2db39d71634 upstream.

The libgpio code pre-sets the GPIO values for the gpio-reset in the
device tree.  This results in the device being reset during bringup.
To prevent this pre-setting, use the "open-source" flag in the device
tree.

Signed-off-by: Jon Mason <jon.mason@broadcom.com>
Fixes: b1aaf88 ("ARM: dts: NSP: Add GPIO reboot method to bcm958625hr DTS file")
Fixes: 10baed1 ("ARM: dts: NSP: Add GPIO reboot method to bcm958625xmc DTS file")
Fixes: 088e3148 ("ARM: dts: NSP: Add new DT file for bcm958522er")
Fixes: e3227c1 ("ARM: dts: NSP: Add new DT file for bcm958525er")
Fixes: 2f8bc00 ("ARM: dts: NSP: Add new DT file for bcm958622hr")
Fixes: d454c37 ("ARM: dts: NSP: Add new DT file for bcm958623hr")
Fixes: f27eacf ("ARM: dts: NSP: Add new DT file for bcm988312hr")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: pxa: ezx: fix a910 camera data

commit 67af5ebde1a4cd10e7bb663440de0773b7597c70 upstream.

The camera_supply_dummy_device definition is shared between a780 and a910,
but only provided when the first is enabled and fails to build for a
configuration with only a910:

arch/arm/mach-pxa/ezx.c:1097:3: error: 'camera_supply_dummy_device' undeclared here (not in a function)

This moves the definition into its own section.

Fixes: 6c1b417adc8f ("ARM: pxa: ezx: use the new pxa_camera platform_data")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

leds: ktd2692: avoid harmless maybe-uninitialized warning

commit cbe99c538d1776009e8710755bb6e726f7fffa9b upstream.

gcc gets confused about the control flow in ktd2692_parse_dt(), causing
it to warn about what seems like a potential bug:

drivers/leds/leds-ktd2692.c: In function 'ktd2692_probe':
drivers/leds/leds-ktd2692.c:244:15: error: '*((void *)&led_cfg+8)' may be used uninitialized in this function [-Werror=maybe-uninitialized]
drivers/leds/leds-ktd2692.c:225:7: error: 'led_cfg.flash_max_microamp' may be used uninitialized in this function [-Werror=maybe-uninitialized]
drivers/leds/leds-ktd2692.c:232:3: error: 'led_cfg.movie_max_microamp' may be used uninitialized in this function [-Werror=maybe-uninitialized]

The code is fine, and slightly reworking it in an equivalent way lets
gcc figure that out too, which gets rid of the warning.

Fixes: 77e7915b15bb ("leds: ktd2692: Add missing of_node_put")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

spi: armada-3700: Remove spi_master_put in a3700_spi_remove()

commit e92f0051c0c65d7bee989884a233cfcd80303bdf upstream.

The call to spi_master_put() in a3700_spi_remove() is redundant since
the master is registered using devm_spi_register_master() and no
reference hold by using spi_master_get() in a3700_spi_remove().

This is detected by Coccinelle semantic patch.

Fixes: 5762ab71eb24 ("spi: Add support for Armada 3700 SPI Controller")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: Improve detection of user/non-user mappings in set_pte(_at)

commit ec663d967b2276448a416406ca59ff247c0c80c5 upstream.

Commit cab15ce604e5 ("arm64: Introduce execute-only page access
permissions") allowed a valid user PTE to have the PTE_USER bit clear.
As a consequence, the pte_valid_not_user() macro in set_pte() was
replaced with pte_valid_global() under the assumption that only user
pages have the nG bit set. EFI mappings, however, also have the nG bit
set and set_pte() wrongly ignores issuing the DSB+ISB.

This patch reinstates the pte_valid_not_user() macro and adds the
PTE_UXN bit check since all kernel mappings have this bit set. For
clarity, pte_exec() is renamed to pte_user_exec() as it only checks for
the absence of PTE_UXN. Consequently, the user executable check in
set_pte_at() drops the pte_ng() test since pte_user_exec() is
sufficient.

Fixes: cab15ce604e5 ("arm64: Introduce execute-only page access permissions")
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: remove wrong CONFIG_PROC_SYSCTL ifdef

commit fe0a7ef74d1f65b86820a54636323df2b31e0c3f upstream.

The sysfs cpu_capacity entry for each CPU has nothing to do with
PROC_FS, nor it's in /proc/sys path.

Remove such ifdef.

Cc: Will Deacon <will.deacon@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Reported-and-suggested-by: Sudeep Holla <sudeep.holla@arm.com>
Fixes: be8f185d8af4 ('arm64: add sysfs cpu_capacity attribute')
Signed-off-by: Juri Lelli <juri.lelli@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm: dts: qcom: Fix ipq board clock rates

commit 06dbf468a2c42bf6c327a8eaf11ecb3ea96196f9 upstream.

The ipq board has these rates as 25MHz, and not 19.2 and 27. I
copy/pasted from other boards that have those rates but forgot
to fix the rates here.

Fixes: 30fc4212d541 ("arm: dts: qcom: Add more board clocks")
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: dts: r8a7795: Mark EthernetAVB device node disabled

commit 0d1390ff283f6c38595288e7f74da6829896b8b7 upstream.

Device nodes representing I/O devices should be marked disabled in the
SoC-specific DTS, and overridden by board-specific DTSes where needed.

Fixes: a92843c8a6f8c039 ("arm64: dts: r8a7795: add EthernetAVB device node")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

power: supply: bq24190_charger: Handle fault before status on interrupt

commit ba52e75718784fda1b683ee0bfded72a0b83b047 upstream.

Reading both fault and status registers and logging any fault should
take priority over handling status register update.

Fix by moving the status handling to later in interrupt routine.

Fixes: d7bf353fd0aa3 ("bq24190_charger: Add support for TI BQ24190 Battery Charger")
Signed-off-by: Liam Breck <kernel@networkimprov.net>
Acked-by: Mark Greer <mgreer@animalcreek.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

power: supply: bq24190_charger: Don't read fault register outside irq_handle_thread()

commit 68abfb8015832ddf728b911769659468efaf8bd9 upstream.

Caching the fault register after a single I2C read may not keep an accurate
value.

Fix by doing two reads in irq_handle_thread() and using the cached value
elsewhere. If a safety timer fault later clears itself, we apparently don't get
an interrupt (INT), however other interrupts would refresh the register cache.

From the data sheet: "When a fault occurs, the charger device sends out INT
 and keeps the fault state in REG09 until the host reads the fault register.
 Before the host reads REG09 and all the faults are cleared, the charger
 device would not send any INT upon new faults. In order to read the
 current fault status, the host has to read REG09 two times consecutively.
 The 1st reads fault register status from the last read [1] and the 2nd reads
 the current fault register status."

[1] presumably a typo; should be "last fault"

Fixes: d7bf353fd0aa3 ("bq24190_charger: Add support for TI BQ24190 Battery Charger")
Signed-off-by: Liam Breck <kernel@networkimprov.net>
Acked-by: Mark Greer <mgreer@animalcreek.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

power: supply: bq24190_charger: Call power_supply_changed() for relevant component

commit 2d9fee6a42ea170e4378b3363a7ad385d0e67281 upstream.

We wrongly get uevents for bq24190-charger and bq24190-battery on every
register change.

Fix by checking the association with charger and battery before
emitting uevent(s).

Fixes: d7bf353fd0aa3 ("bq24190_charger: Add support for TI BQ24190 Battery Charger")
Signed-off-by: Liam Breck <kernel@networkimprov.net>
Acked-by: Mark Greer <mgreer@animalcreek.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

power: supply: bq24190_charger: Install irq_handler_thread() at end of probe()

commit d62acc5ef0621463446091ebd7a345e06e9ab80c upstream.

The device specific data is not fully initialized on
request_threaded_irq(). This may cause a crash when the IRQ handler
tries to reference them.

Fix the issue by installing IRQ handler at the end of the probe.

Fixes: d7bf353fd0aa3 ("bq24190_charger: Add support for TI BQ24190 Battery Charger")
Signed-off-by: Liam Breck <kernel@networkimprov.net>
Acked-by: Mark Greer <mgreer@animalcreek.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

power: supply: bq24190_charger: Call set_mode_host() on pm_resume()

commit e05ad7e0741ce0505e1df157c62b22b95172bb97 upstream.

pm_resume() does a register_reset() which clears charger host mode.

Fix by calling set_mode_host() after the reset.

Fixes: d7bf353fd0aa3 ("bq24190_charger: Add support for TI BQ24190 Battery Charger")
Signed-off-by: Liam Breck <kernel@networkimprov.net>
Acked-by: Mark Greer <mgreer@animalcreek.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

power: supply: bq24190_charger: Fix irq trigger to IRQF_TRIGGER_FALLING

commit 767eee362fd72bb2ca44cc80419ca4b38c6d8369 upstream.

The interrupt signal is TRIGGER_FALLING. This is is specified in the
data sheet PIN FUNCTIONS: "The INT pin sends active low, 256us
pulse to host to report charger device status and fault."

Also the direction can be seen in the data sheet Figure 37 "BQ24190
with D+/D- Detection and USB On-The-Go (OTG)" which shows a 10k
pull-up resistor installed for the sample configurations.

Fixes: d7bf353fd0aa3 ("bq24190_charger: Add support for TI BQ24190 Battery Charger")
Signed-off-by: Liam Breck <kernel@networkimprov.net>
Acked-by: Mark Greer <mgreer@animalcreek.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf/x86/intel/pt: Add format strings for PTWRITE and power event tracing

commit 5443624bedd0d23e112d5f2a919435182875bce9 upstream.

Commit:

  8ee83b2ab3 ("perf/x86/intel/pt: Add support for PTWRITE and power event tracing")

forgot to add format strings to the PT driver. So one could enable these features
by setting corresponding bits in the event config, but not by their mnemonic names.

This patch adds the format strings.

Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: vince@deater.net
Fixes: 8ee83b2ab3 ("perf/x86/intel/pt: Add support for PTWRITE...")
Link: http://lkml.kernel.org/r/20170127151644.8585-2-alexander.shishkin@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc: Correctly disable latent entropy GCC plugin on prom_init.o

commit eac6f8b0c7adb003776dbad9d037ee2fc64f9d62 upstream.

Commit 38addce8b600 ("gcc-plugins: Add latent_entropy plugin") excludes
certain powerpc early boot code from the latent entropy plugin by adding
appropriate CFLAGS. It looks like this was supposed to cover
prom_init.o, but ended up saying init.o (which doesn't exist) instead.
Fix the typo.

Fixes: 38addce8b600 ("gcc-plugins: Add latent_entropy plugin")
Signed-off-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/ftrace: Fix confusing help text for DISABLE_MPROFILE_KERNEL

commit 496e9cb5b2aa2ba303d2bbd08518f9be2219ab4b upstream.

The final paragraph of the help text is reversed. We want to enable
this option by default, and disable it if the toolchain has a working
-mprofile-kernel.

Fixes: 8c50b72a3b4f ("powerpc/ftrace: Add Kconfig & Make glue for mprofile-kernel")
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/mm: Fix build break when CMA=n && SPAPR_TCE_IOMMU=y

commit a05ef161cdd22faccffe06f21fc8f1e249565385 upstream.

Currently the build breaks if CMA=n and SPAPR_TCE_IOMMU=y:

  arch/powerpc/mm/mmu_context_iommu.c: In function ‘mm_iommu_get’:
  arch/powerpc/mm/mmu_context_iommu.c:193:42: error: ‘MIGRATE_CMA’ undeclared (first use in this function)
  if (get_pageblock_migratetype(page) == MIGRATE_CMA) {
  ^~~~~~~~~~~

Fix it by using the existing is_migrate_cma_page(), which evaulates to
false when CMA=n.

Fixes: 2e5bbb5461f1 ("KVM: PPC: Book3S HV: Migrate pinned pages out of CMA")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/powernv: Fix opal_exit tracepoint opcode

commit a7e0fb6c2029a780444d09560f739e020d54fe4d upstream.

Currently the opal_exit tracepoint usually shows the opcode as 0:

  <idle>-0     [047] d.h.   635.654292: opal_entry: opcode=63
  <idle>-0     [047] d.h.   635.654296: opal_exit: opcode=0 retval=0
  kopald-1209  [019] d...   636.420943: opal_entry: opcode=10
  kopald-1209  [019] d...   636.420959: opal_exit: opcode=0 retval=0

This is because we incorrectly load the opcode into r0 before calling
__trace_opal_exit(), whereas it expects the opcode in r3 (first function
parameter). In fact we are leaving the retval in r3, so opcode and
retval will always show the same value.

Instead load the opcode into r3, resulting in:

  <idle>-0     [040] d.h.   636.618625: opal_entry: opcode=63
  <idle>-0     [040] d.h.   636.618627: opal_exit: opcode=63 retval=0

Fixes: c49f63530bb6 ("powernv: Add OPAL tracepoints")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/mm: Fixup wrong LPCR_VRMASD value

commit 4ab2537c4204b976e4ca350bbdc193b4649cad28 upstream.

In commit a4b349540a26af ("powerpc/mm: Cleanup LPCR defines") we updated
LPCR_VRMASD wrongly as below.

-#define   LPCR_VRMASD  (0x1ful << (63-16))
+#define   LPCR_VRMASD_SH       47
+#define   LPCR_VRMASD          (ASM_CONST(1) << LPCR_VRMASD_SH)

We initialize the VRMA bits in LPCR to 0x00 in kvm. Hence using a
different mask value as above while updating lpcr should not have any
impact.

This patch updates it to the correct value.

Fixes: a4b349540a26 ("powerpc/mm: Cleanup LPCR defines")
Reported-by: Ram Pai <linuxram@us.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Jia He <hejianet@gmail.com>
Acked-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/perf: Avoid FAB_*_MATCH checks for power9

commit 78a16d9fc1206e1a484b6ac96348756f3846bfea upstream.

Since power9 does not support FAB_*_MATCH bits in MMCR1,
avoid these checks for power9. For this, patch factor out
code in isa207_get_constraint() to retain these checks
only for power8.

Patch also updates the comment in power9-pmu raw event
encode layout to remove FAB_*_MATCH.

Finally for power9, patch adds additional check for
threshold events when adding the thresh mask and value in
isa207_get_constraint().

fixes: 7ffd948fae4c ('powerpc/perf: factor out power8 pmu functions')
fixes: 18201b204286 ('powerpc/perf: power9 raw event format encoding')
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/perf: Handle sdar_mode for marked event in power9

commit 78b4416aa249365dd3c1b64da4d3a232014320b0 upstream.

MMCRA[SDAR_MODE] specifices how the SDAR should be updated in
continous sampling mode. On P9 it must be set to 0b00 when
MMCRA[63] is set.

Fixes: c7c3f568beff2 ('powerpc/perf: macros for power9 format encoding')
Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/perf: Fix perf_get_data_addr() for power9 DD1

commit f04d108029063a8a67528a88449c412aecf4d3d8 upstream.

Power9 DD1 do not support PMU_HAS_SIER flag and sdsync in
perf_get_data_addr() defaults to MMCRA_SDSYNC which is wrong. Since
power9 MMCRA does not support SDSYNC bit, patch includes PPMU_NO_SIAR
flag to the check and set the sdsync with MMCRA_SAMPLE_ENABLE;

Fixes: 27593d72c4ad ("powerpc/perf: Use MSR to report privilege level on P9 DD1")
Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cpupower: Fix turbo frequency reporting for pre-Sandy Bridge cores

commit 4cca0457686e4ee1677d69469e4ddfd94d389a80 upstream.

The switch that conditionally sets CPUPOWER_CAP_HAS_TURBO_RATIO and
CPUPOWER_CAP_IS_SNB flags is missing a break, so all cores get both
flags set and an assumed base clock of 100 MHz for turbo values.

Reported-by: GSR <gsr.bugs@infernal-iceberg.com>
Tested-by: GSR <gsr.bugs@infernal-iceberg.com>
References: https://bugs.debian.org/859978
Fixes: 8fb2e440b223 (cpupower: Show Intel turbo ratio support via ...)
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

power: supply: lp8788: prevent out of bounds array access

commit bdd9968d35f7fcdb76089347d1529bf079534214 upstream.

val might become 7 in which case stime[7] (array of length 7) would be
accessed during the scnprintf call later and that will cause issues.
Obviously, string concatenation is not intended here so just a comma needs
to be added to fix the issue.

Fixes: 98a276649358 ("power_supply: Add new lp8788 charger driver")
Signed-off-by: Giedrius Statkevičius <giedrius.statkevicius@gmail.com>
Acked-by: Milo Kim <milo.kim@ti.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto: caam - don't dma_map key for hash algorithms

commit cfb725f6d3d31355fa4510da7d7bdce807045b42 upstream.

Shared descriptors for hash algorithms are small enough
for (split) keys to be inlined in all cases.
Since driver already does this, all what's left is to remove
unused ctx->key_dma.

Fixes: 045e36780f115 ("crypto: caam - ahash hmac support")
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>