ARC: fix build warnings

[ Upstream commit 89c92142f75eb80064f5b9f1111484b1b4d81790 ]

| arch/arc/mm/tlb.c:914:2: warning: variable length array 'pd0' is used [-Wvla]
| arch/arc/include/asm/cmpxchg.h:95:29: warning: value computed is not used [-Wunused-value]

Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

lkdtm/usercopy: Moves the KERNEL_DS test to non-canonical

[ Upstream commit 2bf8496f6e9b7e9a557f65eb95eab16fea7958c7 ]

The prior implementation of the KERNEL_DS fault checking would work on
any unmapped kernel address, but this was narrowed to the non-canonical
range instead. This adjusts the LKDTM test to match.

Fixes: 00c42373d397 ("x86-64: add warning for non-canonical user access address dereferences")
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

brcmfmac: sdio: Don't tune while the card is off

commit 65dade6044079a5c206fd1803642ff420061417a upstream.

When Broadcom SDIO cards are idled they go to sleep and a whole
separate subsystem takes over their SDIO communication.  This is the
Always-On-Subsystem (AOS) and it can't handle tuning requests.

Specifically, as tested on rk3288-veyron-minnie (which reports having
BCM4354/1 in dmesg), if I force a retune in brcmf_sdio_kso_control()
when "on = 1" (aka we're transition from sleep to wake) by whacking:
  bus->sdiodev->func1->card->host->need_retune = 1
...then I can often see tuning fail.  In this case dw_mmc reports "All
phases bad!").  Note that I don't get 100% failure, presumably because
sometimes the card itself has already transitioned away from the AOS
itself by the time we try to wake it up.  If I force retuning when "on
= 0" (AKA force retuning right before sending the command to go to
sleep) then retuning is always OK.

NOTE: we need _both_ this patch and the patch to avoid triggering
tuning due to CRC errors in the sleep/wake transition, AKA ("brcmfmac:
sdio: Disable auto-tuning around commands expected to fail").  Though
both patches handle issues with Broadcom's AOS, the problems are
distinct:
1. We want to defer (but not ignore) asynchronous (like
   timer-requested) tuning requests till the card is awake.  However,
   we want to ignore CRC errors during the transition, we don't want
   to queue deferred tuning request.
2. You could imagine that the AOS could implement retuning but we
   could still get errors while transitioning in and out of the AOS.
   Similarly you could imagine a seamless transition into and out of
   the AOS (with no CRC errors) even if the AOS couldn't handle
   tuning.

ALSO NOTE: presumably there is never a desperate need to retune in
order to wake up the card, since doing so is impossible.  Luckily the
only way the card can get into sleep state is if we had a good enough
tuning to send it the command to put it into sleep, so presumably that
"good enough" tuning is enough to wake us up, at least with a few
retries.

Cc: stable@vger.kernel.org #v4.18+
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Acked-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

brcmfmac: sdio: Disable auto-tuning around commands expected to fail

commit 2de0b42da263c97d330d276f5ccf7c4470e3324f upstream.

There are certain cases, notably when transitioning between sleep and
active state, when Broadcom SDIO WiFi cards will produce errors on the
SDIO bus.  This is evident from the source code where you can see that
we try commands in a loop until we either get success or we've tried
too many times.  The comment in the code reinforces this by saying
"just one write attempt may fail"

Unfortunately these failures sometimes end up causing an "-EILSEQ"
back to the core which triggers a retuning of the SDIO card and that
blocks all traffic to the card until it's done.

Let's disable retuning around the commands we expect might fail.

Cc: stable@vger.kernel.org #v4.18+
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Acked-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "brcmfmac: disable command decode in sdio_aos"

commit abdd5dcc00207e7c38680f3754d1bfffafff1093 upstream.

This reverts commit 29f6589140a10ece8c1d73f58043ea5b3473ab3e.

After that patch landed I find that my kernel log on
rk3288-veyron-minnie and rk3288-veyron-speedy is filled with:
brcmfmac: brcmf_sdio_bus_sleep: error while changing bus sleep state -110

This seems to happen every time the Broadcom WiFi transitions out of
sleep mode.  Reverting the commit fixes the problem for me, so that's
what this patch does.

Note that, in general, the justification in the original commit seemed
a little weak.  It looked like someone was testing on a SD card
controller that would sometimes die if there were CRC errors on the
bus.  This used to happen back in early days of dw_mmc (the controller
on my boards), but we fixed it.  Disabling a feature on all boards
just because one SD card controller is broken seems bad.

Fixes: 29f6589140a1 ("brcmfmac: disable command decode in sdio_aos")
Cc: Wright Feng <wright.feng@cypress.com>
Cc: Double Lo <double.lo@cypress.com>
Cc: Madhan Mohan R <madhanmohan.r@cypress.com>
Cc: Chi-Hsien Lin <chi-hsien.lin@cypress.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Cc: stable@vger.kernel.org
Acked-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

apparmor: reset pos on failure to unpack for various functions

commit 156e42996bd84eccb6acf319f19ce0cb140d00e3 upstream.

Each function that manipulates the aa_ext struct should reset it's "pos"
member on failure. This ensures that, on failure, no changes are made to
the state of the aa_ext struct.

There are paths were elements are optional and the error path is
used to indicate the optional element is not present. This means
instead of just aborting on error the unpack stream can become
unsynchronized on optional elements, if using one of the affected
functions.

Cc: stable@vger.kernel.org
Fixes: 736ec752d95e ("AppArmor: policy routines for loading and unpacking policy")
Signed-off-by: Mike Salvatore <mike.salvatore@canonical.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

apparmor: enforce nullbyte at end of tag string

commit 8404d7a674c49278607d19726e0acc0cae299357 upstream.

A packed AppArmor policy contains null-terminated tag strings that are read
by unpack_nameX(). However, unpack_nameX() uses string functions on them
without ensuring that they are actually null-terminated, potentially
leading to out-of-bounds accesses.

Make sure that the tag string is null-terminated before passing it to
strcmp().

Cc: stable@vger.kernel.org
Fixes: 736ec752d95e ("AppArmor: policy routines for loading and unpacking policy")
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

apparmor: fix PROFILE_MEDIATES for untrusted input

commit 23375b13f98c5464c2b4d15f983cc062940f1f4e upstream.

While commit 11c236b89d7c2 ("apparmor: add a default null dfa") ensure
every profile has a policy.dfa it does not resize the policy.start[]
to have entries for every possible start value. Which means
PROFILE_MEDIATES is not safe to use on untrusted input. Unforunately
commit b9590ad4c4f2 ("apparmor: remove POLICY_MEDIATES_SAFE") did not
take into account the start value usage.

The input string in profile_query_cb() is user controlled and is not
properly checked to be within the limited start[] entries, even worse
it can't be as userspace policy is allowed to make us of entries types
the kernel does not know about. This mean usespace can currently cause
the kernel to access memory up to 240 entries beyond the start array
bounds.

Cc: stable@vger.kernel.org
Fixes: b9590ad4c4f2 ("apparmor: remove POLICY_MEDIATES_SAFE")
Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Input: silead - add MSSL0017 to acpi_device_id

commit 0e658060e5fc50dc282885dc424a94b5d95547e5 upstream.

On Chuwi Hi10 Plus, the Silead device id is MSSL0017.

Signed-off-by: Daniel Smith <danct12@disroot.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Input: uinput - add compat ioctl number translation for UI_*_FF_UPLOAD

commit 7c7da40da1640ce6814dab1e8031b44e19e5a3f6 upstream.

In the case of compat syscall ioctl numbers for UI_BEGIN_FF_UPLOAD and
UI_END_FF_UPLOAD need to be adjusted before being passed on
uinput_ioctl_handler() since code built with -m32 will be passing
slightly different values. Extend the code already covering
UI_SET_PHYS to cover UI_BEGIN_FF_UPLOAD and UI_END_FF_UPLOAD as well.

Reported-by: Pierre-Loup A. Griffais <pgriffais@valvesoftware.com>
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Input: synaptics - enable SMBus on ThinkPad E480 and E580

commit 9843f3e08e2144724be7148e08d77a195dea257a upstream.

They are capable of using intertouch and it works well with
psmouse.synaptics_intertouch=1, so add them to the list.

Without it, scrolling and gestures are jumpy, three-finger pinch gesture
doesn't work and three- or four-finger swipes sometimes get stuck.

Signed-off-by: Alexander Mikhaylenko <exalm7659@gmail.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: temperature: mlx90632 Relax the compatibility check

commit 389fc70b60f534d679aea9a3f05146040ce20d77 upstream.

Register EE_VERSION contains mixture of calibration information and DSP
version. So far, because calibrations were definite, the driver
compatibility depended on whole contents, but in the newer production
process the calibration part changes. Because of that, value in EE_VERSION
will be changed and to avoid that calibration value is same as DSP version
the MSB in calibration part was fixed to 1.
That means existing calibrations (medical and consumer) will now have
hex values (bits 8 to 15) of 83 and 84 respectively. Driver compatibility
should be based only on DSP version part of the EE_VERSION (bits 0 to 7)
register.

Signed-off-by: Crt Mori <cmo@melexis.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: imu: st_lsm6dsx: fix PM support for st_lsm6dsx i2c controller

commit bce0d57db388cdb1c1931d0aa7d31c77b590e0f0 upstream.

Properly suspend/resume i2c slaves connected to st_lsm6dsx master
controller if the CPU goes in suspended state

Fixes: c91c1c844ebd ("imu: st_lsm6dsx: add i2c embedded controller support")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

IB/hfi1: Silence txreq allocation warnings

commit 3230f4a8d44e4a0bb7afea814b280b5129521f52 upstream.

The following warning can happen when a memory shortage
occurs during txreq allocation:

[10220.939246] SLUB: Unable to allocate memory on node -1, gfp=0xa20(GFP_ATOMIC)
[10220.939246] Hardware name: Intel Corporation S2600WT2R/S2600WT2R, BIOS SE5C610.86B.01.01.0018.C4.072020161249 07/20/2016
[10220.939247]   cache: mnt_cache, object size: 384, buffer size: 384, default order: 2, min order: 0
[10220.939260] Workqueue: hfi0_0 _hfi1_do_send [hfi1]
[10220.939261]   node 0: slabs: 1026568, objs: 43115856, free: 0
[10220.939262] Call Trace:
[10220.939262]   node 1: slabs: 820872, objs: 34476624, free: 0
[10220.939263]  dump_stack+0x5a/0x73
[10220.939265]  warn_alloc+0x103/0x190
[10220.939267]  ? wake_all_kswapds+0x54/0x8b
[10220.939268]  __alloc_pages_slowpath+0x86c/0xa2e
[10220.939270]  ? __alloc_pages_nodemask+0x2fe/0x320
[10220.939271]  __alloc_pages_nodemask+0x2fe/0x320
[10220.939273]  new_slab+0x475/0x550
[10220.939275]  ___slab_alloc+0x36c/0x520
[10220.939287]  ? hfi1_make_rc_req+0x90/0x18b0 [hfi1]
[10220.939299]  ? __get_txreq+0x54/0x160 [hfi1]
[10220.939310]  ? hfi1_make_rc_req+0x90/0x18b0 [hfi1]
[10220.939312]  __slab_alloc+0x40/0x61
[10220.939323]  ? hfi1_make_rc_req+0x90/0x18b0 [hfi1]
[10220.939325]  kmem_cache_alloc+0x181/0x1b0
[10220.939336]  hfi1_make_rc_req+0x90/0x18b0 [hfi1]
[10220.939348]  ? hfi1_verbs_send_dma+0x386/0xa10 [hfi1]
[10220.939359]  ? find_prev_entry+0xb0/0xb0 [hfi1]
[10220.939371]  hfi1_do_send+0x1d9/0x3f0 [hfi1]
[10220.939372]  process_one_work+0x171/0x380
[10220.939374]  worker_thread+0x49/0x3f0
[10220.939375]  kthread+0xf8/0x130
[10220.939377]  ? max_active_store+0x80/0x80
[10220.939378]  ? kthread_bind+0x10/0x10
[10220.939379]  ret_from_fork+0x35/0x40
[10220.939381] SLUB: Unable to allocate memory on node -1, gfp=0xa20(GFP_ATOMIC)

The shortage is handled properly so the message isn't needed. Silence by
adding the no warn option to the slab allocation.

Fixes: 45842abbb292 ("staging/rdma/hfi1: move txreq header code")
Cc: <stable@vger.kernel.org>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

IB/hfi1: Correct tid qp rcd to match verbs context

commit cc78076af14e1478c1a8fb18997674b5f8cbe3c8 upstream.

The qp priv rcd pointer doesn't match the context being used for verbs
causing issues when 9B and kdeth packets are processed by different
receive contexts and hence different CPUs.

When running on different CPUs the following panic can occur:

 WARNING: CPU: 3 PID: 2584 at lib/list_debug.c:59 __list_del_entry+0xa1/0xd0
 list_del corruption. prev->next should be ffff9a7ac31f7a30, but was ffff9a7c3bc89230
 CPU: 3 PID: 2584 Comm: z_wr_iss Kdump: loaded Tainted: P           OE  ------------   3.10.0-862.2.3.el7_lustre.x86_64 #1
 Call Trace:
  <IRQ>  [<ffffffffb7b0d78e>] dump_stack+0x19/0x1b
  [<ffffffffb74916d8>] __warn+0xd8/0x100
  [<ffffffffb749175f>] warn_slowpath_fmt+0x5f/0x80
  [<ffffffffb7768671>] __list_del_entry+0xa1/0xd0
  [<ffffffffc0c7a945>] process_rcv_qp_work+0xb5/0x160 [hfi1]
  [<ffffffffc0c7bc2b>] handle_receive_interrupt_nodma_rtail+0x20b/0x2b0 [hfi1]
  [<ffffffffc0c70683>] receive_context_interrupt+0x23/0x40 [hfi1]
  [<ffffffffb7540a94>] __handle_irq_event_percpu+0x44/0x1c0
  [<ffffffffb7540c42>] handle_irq_event_percpu+0x32/0x80
  [<ffffffffb7540ccc>] handle_irq_event+0x3c/0x60
  [<ffffffffb7543a1f>] handle_edge_irq+0x7f/0x150
  [<ffffffffb742d504>] handle_irq+0xe4/0x1a0
  [<ffffffffb7b23f7d>] do_IRQ+0x4d/0xf0
  [<ffffffffb7b16362>] common_interrupt+0x162/0x162
  <EOI>  [<ffffffffb775a326>] ? memcpy+0x6/0x110
  [<ffffffffc109210d>] ? abd_copy_from_buf_off_cb+0x1d/0x30 [zfs]
  [<ffffffffc10920f0>] ? abd_copy_to_buf_off_cb+0x30/0x30 [zfs]
  [<ffffffffc1093257>] abd_iterate_func+0x97/0x120 [zfs]
  [<ffffffffc10934d9>] abd_copy_from_buf_off+0x39/0x60 [zfs]
  [<ffffffffc109b828>] arc_write_ready+0x178/0x300 [zfs]
  [<ffffffffb7b11032>] ? mutex_lock+0x12/0x2f
  [<ffffffffb7b11032>] ? mutex_lock+0x12/0x2f
  [<ffffffffc1164d05>] zio_ready+0x65/0x3d0 [zfs]
  [<ffffffffc04d725e>] ? tsd_get_by_thread+0x2e/0x50 [spl]
  [<ffffffffc04d1318>] ? taskq_member+0x18/0x30 [spl]
  [<ffffffffc115ef22>] zio_execute+0xa2/0x100 [zfs]
  [<ffffffffc04d1d2c>] taskq_thread+0x2ac/0x4f0 [spl]
  [<ffffffffb74cee80>] ? wake_up_state+0x20/0x20
  [<ffffffffc115ee80>] ? zio_taskq_member.isra.7.constprop.10+0x80/0x80 [zfs]
  [<ffffffffc04d1a80>] ? taskq_thread_spawn+0x60/0x60 [spl]
  [<ffffffffb74bae31>] kthread+0xd1/0xe0
  [<ffffffffb74bad60>] ? insert_kthread_work+0x40/0x40
  [<ffffffffb7b1f5f7>] ret_from_fork_nospec_begin+0x21/0x21
  [<ffffffffb74bad60>] ? insert_kthread_work+0x40/0x40

Fix by reading the map entry in the same manner as the hardware so that
the kdeth and verbs contexts match.

Cc: <stable@vger.kernel.org>
Fixes: 5190f052a365 ("IB/hfi1: Allow the driver to initialize QP priv struct")
Reviewed-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

IB/hfi1: Avoid hardlockup with flushlist_lock

commit cf131a81967583ae737df6383a0893b9fee75b4e upstream.

Heavy contention of the sde flushlist_lock can cause hard lockups at
extreme scale when the flushing logic is under stress.

Mitigate by replacing the item at a time copy to the local list with
an O(1) list_splice_init() and using the high priority work queue to
do the flushes.

Fixes: 7724105686e7 ("IB/hfi1: add driver files")
Cc: <stable@vger.kernel.org>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

IB/hfi1: Close PSM sdma_progress sleep window

commit da9de5f8527f4b9efc82f967d29a583318c034c7 upstream.

The call to sdma_progress() is called outside the wait lock.

In this case, there is a race condition where sdma_progress() can return
false and the sdma_engine can idle.  If that happens, there will be no
more sdma interrupts to cause the wakeup and the user_sdma xmit will hang.

Fix by moving the lock to enclose the sdma_progress() call.

Also, delete busycount. The need for this was removed by:
commit bcad29137a97 ("IB/hfi1: Serve the most starved iowait entry first")

Cc: <stable@vger.kernel.org>
Fixes: 7724105686e7 ("IB/hfi1: add driver files")
Reviewed-by: Gary Leshner <Gary.S.Leshner@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

IB/hfi1: Validate fault injection opcode user input

commit 5f90677ed31963abb184ee08ebee4a4a68225dd8 upstream.

The opcode range for fault injection from user should be validated before
it is applied to the fault->opcodes[] bitmap to avoid out-of-bound
error.

Cc: <stable@vger.kernel.org>
Fixes: a74d5307caba ("IB/hfi1: Rework fault injection machinery")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cifs: fix GlobalMid_Lock bug in cifs_reconnect

commit 61cabc7b0a5cf0d3c532cfa96594c801743fe7f6 upstream.

We can not hold the GlobalMid_Lock spinlock during the
dfs processing in cifs_reconnect since it invokes things that may sleep
and thus trigger :

BUG: sleeping function called from invalid context at kernel/locking/rwsem.c:23

Thus we need to drop the spinlock during this code block.

RHBZ: 1716743

Cc: stable@vger.kernel.org
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Acked-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cifs: add spinlock for the openFileList to cifsInodeInfo

commit 487317c99477d00f22370625d53be3239febabbe upstream.

We can not depend on the tcon->open_file_lock here since in multiuser mode
we may have the same file/inode open via multiple different tcons.

The current code is race prone and will crash if one user deletes a file
at the same time a different user opens/create the file.

To avoid this we need to have a spinlock attached to the inode and not the tcon.

RHBZ:  1580165

CC: Stable <stable@vger.kernel.org>
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: xhci: Don't try to recover an endpoint if port is in error state.

commit b8c3b718087bf7c3c8e388eb1f72ac1108a4926e upstream.

A USB3 device needs to be reset and re-enumarated if the port it
connects to goes to a error state, with link state inactive.

There is no use in trying to recover failed transactions by resetting
endpoints at this stage. Tests show that in rare cases, after multiple
endpoint resets of a roothub port the whole host controller might stop
completely.

Several retries to recover from transaction error can happen as
it can take a long time before the hub thread discovers the USB3
port error and inactive link.

We can't reliably detect the port error from slot or endpoint context
due to a limitation in xhci, see xhci specs section 4.8.3:
"There are several cases where the EP State field in the Output
Endpoint Context may not reflect the current state of an endpoint"
and
"Software should maintain an accurate value for EP State, by tracking it
with an internal variable that is driven by Events and Doorbell accesses"

Same appears to be true for slot state.

set a flag to the corresponding slot if a USB3 roothub port link goes
inactive to prevent both queueing new URBs and resetting endpoints.

Reported-by: Rapolu Chiranjeevi <chiranjeevi.rapolu@intel.com>
Tested-by: Rapolu Chiranjeevi <chiranjeevi.rapolu@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xhci: detect USB 3.2 capable host controllers correctly

commit ddd57980a0fde30f7b5d14b888a2cc84d01610e8 upstream.

USB 3.2 capability in a host can be detected from the
xHCI Supported Protocol Capability major and minor revision fields.

If major is 0x3 and minor 0x20 then the host is USB 3.2 capable.

For USB 3.2 capable hosts set the root hub lane count to 2.

The Major Revision and Minor Revision fields contain a BCD version number.
The value of the Major Revision field is JJh and the value of the Minor
Revision field is MNh for version JJ.M.N, where JJ = major revision number,
M - minor version number, N = sub-minor version number,
e.g. version 3.1 is represented with a value of 0310h.

Also fix the extra whitespace printed out when announcing regular
SuperSpeed hosts.

Cc: <stable@vger.kernel.org> # v4.18+
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: chipidea: udc: workaround for endpoint conflict issue

commit c19dffc0a9511a7d7493ec21019aefd97e9a111b upstream.

An endpoint conflict occurs when the USB is working in device mode
during an isochronous communication. When the endpointA IN direction
is an isochronous IN endpoint, and the host sends an IN token to
endpointA on another device, then the OUT transaction may be missed
regardless the OUT endpoint number. Generally, this occurs when the
device is connected to the host through a hub and other devices are
connected to the same hub.

The affected OUT endpoint can be either control, bulk, isochronous, or
an interrupt endpoint. After the OUT endpoint is primed, if an IN token
to the same endpoint number on another device is received, then the OUT
endpoint may be unprimed (cannot be detected by software), which causes
this endpoint to no longer respond to the host OUT token, and thus, no
corresponding interrupt occurs.

There is no good workaround for this issue, the only thing the software
could do is numbering isochronous IN from the highest endpoint since we
have observed most of device number endpoint from the lowest.

Cc: <stable@vger.kernel.org> #v3.14+
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Greg KH <gregkh@linuxfoundation.org>
Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Cc: Jun Li <jun.li@nxp.com>
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: ufs: Avoid runtime suspend possibly being blocked forever

commit 24e2e7a19f7e4b83d0d5189040d997bce3596473 upstream.

UFS runtime suspend can be triggered after pm_runtime_enable() is invoked
in ufshcd_pltfrm_init(). However if the first runtime suspend is triggered
before binding ufs_hba structure to ufs device structure via
platform_set_drvdata(), then UFS runtime suspend will be no longer
triggered in the future because its dev->power.runtime_error was set in the
first triggering and does not have any chance to be cleared.

To be more clear, dev->power.runtime_error is set if hba is NULL in
ufshcd_runtime_suspend() which returns -EINVAL to rpm_callback() where
dev->power.runtime_error is set as -EINVAL. In this case, any future
rpm_suspend() for UFS device fails because rpm_check_suspend_allowed()
fails due to non-zero
dev->power.runtime_error.

To resolve this issue, make sure the first UFS runtime suspend get valid
"hba" in ufshcd_runtime_suspend(): Enable UFS runtime PM only after hba is
successfully bound to UFS device structure.

Fixes: 62694735ca95 ([SCSI] ufs: Add runtime PM support for UFS host controller driver)
Cc: stable@vger.kernel.org
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: core: Prevent processing SDIO IRQs when the card is suspended

commit 83293386bc95cf5e9f0c0175794455835bd1cb4a upstream.

Processing of SDIO IRQs must obviously be prevented while the card is
system suspended, otherwise we may end up trying to communicate with an
uninitialized SDIO card.

Reports throughout the years shows that this is not only a theoretical
problem, but a real issue. So, let's finally fix this problem, by keeping
track of the state for the card and bail out before processing the SDIO
IRQ, in case the card is suspended.

Cc: stable@vger.kernel.org
Reported-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: core: Add sdio_retune_hold_now() and sdio_retune_release()

commit b4c9f938d542d5f88c501744d2d12fad4fd2915f upstream.

We want SDIO drivers to be able to temporarily stop retuning when the
driver knows that the SDIO card is not in a state where retuning will
work (maybe because the card is asleep).  We'll move the relevant
functions to a place where drivers can call them.

Cc: stable@vger.kernel.org #v4.18+
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: core: API to temporarily disable retuning for SDIO CRC errors

commit 0a55f4ab9678413a01e740c86e9367ba0c612b36 upstream.

Normally when the MMC core sees an "-EILSEQ" error returned by a host
controller then it will trigger a retuning of the card.  This is
generally a good idea.

However, if a command is expected to sometimes cause transfer errors
then these transfer errors shouldn't cause a re-tuning.  This
re-tuning will be a needless waste of time.  One example case where a
transfer is expected to cause errors is when transitioning between
idle (sometimes referred to as "sleep" in Broadcom code) and active
state on certain Broadcom WiFi SDIO cards.  Specifically if the card
was already transitioning between states when the command was sent it
could cause an error on the SDIO bus.

Let's add an API that the SDIO function drivers can call that will
temporarily disable the auto-tuning functionality.  Then we can add a
call to this in the Broadcom WiFi driver and any other driver that
might have similar needs.

NOTE: this makes the assumption that the card is already tuned well
enough that it's OK to disable the auto-retuning during one of these
error-prone situations.  Presumably the driver code performing the
error-prone transfer knows how to recover / retry from errors.  ...and
after we can get back to a state where transfers are no longer
error-prone then we can enable the auto-retuning again.  If we truly
find ourselves in a case where the card needs to be retuned sometimes
to handle one of these error-prone transfers then we can always try a
few transfers first without auto-retuning and then re-try with
auto-retuning if the first few fail.

Without this change on rk3288-veyron-minnie I periodically see this in
the logs of a machine just sitting there idle:
  dwmmc_rockchip ff0d0000.dwmmc: Successfully tuned phase to XYZ

Cc: stable@vger.kernel.org #v4.18+
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: mediatek: fix SDIO IRQ detection issue

commit 20314ce30af197963b0c239f0952db6aaef73f99 upstream.

If cmd19 timeout or response crcerr occurs during execute_tuning(),
it need invoke msdc_reset_hw(). Otherwise SDIO IRQ can't be detected.

Signed-off-by: jjian zhou <jjian.zhou@mediatek.com>
Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com>
Signed-off-by: Yong Mao <yong.mao@mediatek.com>
Fixes: 5215b2e952f3 ("mmc: mediatek: Add MMC_CAP_SDIO_IRQ support")
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: mediatek: fix SDIO IRQ interrupt handle flow

commit 8a5df8ac628f4febea1e6cd3044bff2d536dd096 upstream.

SDIO IRQ is triggered by low level. It need disable SDIO IRQ
detected function. Otherwise the interrupt register can't be cleared.
It will process the interrupt more.

Signed-off-by: Jjian Zhou <jjian.zhou@mediatek.com>
Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com>
Signed-off-by: Yong Mao <yong.mao@mediatek.com>
Fixes: 5215b2e952f3 ("mmc: mediatek: Add MMC_CAP_SDIO_IRQ support")
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: sdhi: disallow HS400 for M3-W ES1.2, RZ/G2M, and V3H

commit 97bf85b6ec9e6597ce81c79b26a28f7918fc4eaf upstream.

Our HW engineers informed us that HS400 is not working on these SoC
revisions.

Fixes: 0f4e2054c971 ("mmc: renesas_sdhi: disable HS400 on H3 ES1.x and M3-W ES1.[012]")
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: sdhci: sdhci-pci-o2micro: Correctly set bus width when tuning

commit 0f7b79a44e7d7dd3ef1f59758c1a341f217ff5e5 upstream.

The O2Micro controller only supports tuning at 4-bits. So the host driver
needs to change the bus width while tuning and then set it back when done.

There was a bug in the original implementation in that mmc->ios.bus_width
also wasn't updated. Thus setting the incorrect blocksize in
sdhci_send_tuning which results in a tuning failure.

Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Fixes: 0086fc217d5d7 ("mmc: sdhci: Add support for O2 hardware tuning")
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tracing: Silence GCC 9 array bounds warning

commit 0c97bf863efce63d6ab7971dad811601e6171d2f upstream.

Starting with GCC 9, -Warray-bounds detects cases when memset is called
starting on a member of a struct but the size to be cleared ends up
writing over further members.

Such a call happens in the trace code to clear, at once, all members
after and including `seq` on struct trace_iterator:

    In function 'memset',
        inlined from 'ftrace_dump' at kernel/trace/trace.c:8914:3:
    ./include/linux/string.h:344:9: warning: '__builtin_memset' offset
    [8505, 8560] from the object at 'iter' is out of the bounds of
    referenced subobject 'seq' with type 'struct trace_seq' at offset
    4368 [-Warray-bounds]
      344 |  return __builtin_memset(p, c, size);
          |         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~

In order to avoid GCC complaining about it, we compute the address
ourselves by adding the offsetof distance instead of referring
directly to the member.

Since there are two places doing this clear (trace.c and trace_kdb.c),
take the chance to move the workaround into a single place in
the internal header.

Link: http://lkml.kernel.org/r/20190523124535.GA12931@gmail.com
Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
[ Removed unnecessary parenthesis around "iter" ]
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 5.1.14

tcp: refine memory limit test in tcp_fragment()

commit b6653b3629e5b88202be3c9abc44713973f5c4b4 upstream.

tcp_fragment() might be called for skbs in the write queue.

Memory limits might have been exceeded because tcp_sendmsg() only
checks limits at full skb (64KB) boundaries.

Therefore, we need to make sure tcp_fragment() wont punish applications
that might have setup very low SO_SNDBUF values.

Fixes: f070ef2ac667 ("tcp: tcp_fragment() should apply sane memory limits")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Christoph Paasch <cpaasch@apple.com>
Tested-by: Christoph Paasch <cpaasch@apple.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 5.1.13

coredump: fix race condition between collapse_huge_page() and core dumping

commit 59ea6d06cfa9247b586a695c21f94afa7183af74 upstream.

When fixing the race conditions between the coredump and the mmap_sem
holders outside the context of the process, we focused on
mmget_not_zero()/get_task_mm() callers in 04f5866e41fb70 ("coredump: fix
race condition between mmget_not_zero()/get_task_mm() and core
dumping"), but those aren't the only cases where the mmap_sem can be
taken outside of the context of the process as Michal Hocko noticed
while backporting that commit to older -stable kernels.

If mmgrab() is called in the context of the process, but then the
mm_count reference is transferred outside the context of the process,
that can also be a problem if the mmap_sem has to be taken for writing
through that mm_count reference.

khugepaged registration calls mmgrab() in the context of the process,
but the mmap_sem for writing is taken later in the context of the
khugepaged kernel thread.

collapse_huge_page() after taking the mmap_sem for writing doesn't
modify any vma, so it's not obvious that it could cause a problem to the
coredump, but it happens to modify the pmd in a way that breaks an
invariant that pmd_trans_huge_lock() relies upon.  collapse_huge_page()
needs the mmap_sem for writing just to block concurrent page faults that
call pmd_trans_huge_lock().

Specifically the invariant that "!pmd_trans_huge()" cannot become a
"pmd_trans_huge()" doesn't hold while collapse_huge_page() runs.

The coredump will call __get_user_pages() without mmap_sem for reading,
which eventually can invoke a lockless page fault which will need a
functional pmd_trans_huge_lock().

So collapse_huge_page() needs to use mmget_still_valid() to check it's
not running concurrently with the coredump...  as long as the coredump
can invoke page faults without holding the mmap_sem for reading.

This has "Fixes: khugepaged" to facilitate backporting, but in my view
it's more a bug in the coredump code that will eventually have to be
rewritten to stop invoking page faults without the mmap_sem for reading.
So the long term plan is still to drop all mmget_still_valid().

Link: http://lkml.kernel.org/r/20190607161558.32104-1-aarcange@redhat.com
Fixes: ba76149f47d8 ("thp: khugepaged")
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Reported-by: Michal Hocko <mhocko@suse.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Jann Horn <jannh@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Jason Gunthorpe <jgg@mellanox.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nvme-tcp: fix queue mapping when queue count is limited

commit 6486199378a505c58fddc47459631235c9fb7638 upstream.

When the controller supports less queues than requested, we
should make sure that queue mapping does the right thing and
not assume that all queues are available. This fixes a crash
when the controller supports less queues than requested.

The rules are:
1. if no write queues are requested, we assign the available queues
   to the default queue map. The default and read queue maps share the
   existing queues.
2. if write queues are requested:
  - first make sure that read queue map gets the requested
    nr_io_queues count
  - then grant the default queue map the minimum between the requested
    nr_write_queues and the remaining queues. If there are no available
    queues to dedicate to the default queue map, fallback to (1) and
    share all the queues in the existing queue map.

Also, provide a log indication on how we constructed the different
queue maps.

Reported-by: Harris, James R <james.r.harris@intel.com>
Tested-by: Jim Harris <james.r.harris@intel.com>
Cc: <stable@vger.kernel.org> # v5.0+
Suggested-by: Roy Shterman <roys@lightbitslabs.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nvme-tcp: fix possible null deref on a timed out io queue connect

commit f34e25898a608380a60135288019c4cb6013bec8 upstream.

If I/O queue connect times out, we might have freed the queue socket
already, so check for that on the error path in nvme_tcp_start_queue.

Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nvme-tcp: rename function to have nvme_tcp prefix

commit efb973b19b88642bb7e08b8ce8e03b0bbd2a7e2a upstream.

usually nvme_ prefix is for core functions.
While we're cleaning up, remove redundant empty lines

Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Minwoo Im <minwoo.im@samsung.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm: mmu_gather: remove __tlb_reset_range() for force flush

commit 7a30df49f63ad92318ddf1f7498d1129a77dd4bd upstream.

A few new fields were added to mmu_gather to make TLB flush smarter for
huge page by telling what level of page table is changed.

__tlb_reset_range() is used to reset all these page table state to
unchanged, which is called by TLB flush for parallel mapping changes for
the same range under non-exclusive lock (i.e.  read mmap_sem).

Before commit dd2283f2605e ("mm: mmap: zap pages with read mmap_sem in
munmap"), the syscalls (e.g.  MADV_DONTNEED, MADV_FREE) which may update
PTEs in parallel don't remove page tables.  But, the forementioned
commit may do munmap() under read mmap_sem and free page tables.  This
may result in program hang on aarch64 reported by Jan Stancek.  The
problem could be reproduced by his test program with slightly modified
below.

---8<---

static int map_size = 4096;
static int num_iter = 500;
static long threads_total;

static void *distant_area;

void *map_write_unmap(void *ptr)
{
int *fd = ptr;
unsigned char *map_address;
int i, j = 0;

for (i = 0; i < num_iter; i++) {
map_address = mmap(distant_area, (size_t) map_size, PROT_WRITE | PROT_READ,
MAP_SHARED | MAP_ANONYMOUS, -1, 0);
if (map_address == MAP_FAILED) {
perror("mmap");
exit(1);
}

for (j = 0; j < map_size; j++)
map_address[j] = 'b';

if (munmap(map_address, map_size) == -1) {
perror("munmap");
exit(1);
}
}

return NULL;
}

void *dummy(void *ptr)
{
return NULL;
}

int main(void)
{
pthread_t thid[2];

/* hint for mmap in map_write_unmap() */
distant_area = mmap(0, DISTANT_MMAP_SIZE, PROT_WRITE | PROT_READ,
MAP_ANONYMOUS | MAP_PRIVATE, -1, 0);
munmap(distant_area, (size_t)DISTANT_MMAP_SIZE);
distant_area += DISTANT_MMAP_SIZE / 2;

while (1) {
pthread_create(&thid[0], NULL, map_write_unmap, NULL);
pthread_create(&thid[1], NULL, dummy, NULL);

pthread_join(thid[0], NULL);
pthread_join(thid[1], NULL);
}
}
---8<---

The program may bring in parallel execution like below:

        t1                                        t2
munmap(map_address)
  downgrade_write(&mm->mmap_sem);
  unmap_region()
  tlb_gather_mmu()
    inc_tlb_flush_pending(tlb->mm);
  free_pgtables()
    tlb->freed_tables = 1
    tlb->cleared_pmds = 1

                                        pthread_exit()
                                        madvise(thread_stack, 8M, MADV_DONTNEED)
                                          zap_page_range()
                                            tlb_gather_mmu()
                                              inc_tlb_flush_pending(tlb->mm);

  tlb_finish_mmu()
    if (mm_tlb_flush_nested(tlb->mm))
      __tlb_reset_range()

__tlb_reset_range() would reset freed_tables and cleared_* bits, but this
may cause inconsistency for munmap() which do free page tables.  Then it
may result in some architectures, e.g.  aarch64, may not flush TLB
completely as expected to have stale TLB entries remained.

Use fullmm flush since it yields much better performance on aarch64 and
non-fullmm doesn't yields significant difference on x86.

The original proposed fix came from Jan Stancek who mainly debugged this
issue, I just wrapped up everything together.

Jan's testing results:

v5.2-rc2-24-gbec7550cca10
--------------------------
         mean     stddev
real    37.382   2.780
user     1.420   0.078
sys     54.658   1.855

v5.2-rc2-24-gbec7550cca10 + "mm: mmu_gather: remove __tlb_reset_range() for force flush"
---------------------------------------------------------------------------------------_
         mean     stddev
real    37.119   2.105
user     1.548   0.087
sys     55.698   1.357

[akpm@linux-foundation.org: coding-style fixes]
Link: http://lkml.kernel.org/r/1558322252-113575-1-git-send-email-yang.shi@linux.alibaba.com
Fixes: dd2283f2605e ("mm: mmap: zap pages with read mmap_sem in munmap")
Signed-off-by: Yang Shi <yang.shi@linux.alibaba.com>
Signed-off-by: Jan Stancek <jstancek@redhat.com>
Reported-by: Jan Stancek <jstancek@redhat.com>
Tested-by: Jan Stancek <jstancek@redhat.com>
Suggested-by: Will Deacon <will.deacon@arm.com>
Tested-by: Will Deacon <will.deacon@arm.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Nick Piggin <npiggin@gmail.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com>
Cc: Nadav Amit <namit@vmware.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: <stable@vger.kernel.org> [4.20+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ocfs2: fix error path kobject memory leak

[ Upstream commit b9fba67b3806e21b98bd5a98dc3921a8e9b42d61 ]

If a call to kobject_init_and_add() fails we should call kobject_put()
otherwise we leak memory.

Add call to kobject_put() in the error path of call to
kobject_init_and_add().  Please note, this has the side effect that the
release method is called if kobject_init_and_add() fails.

Link: http://lkml.kernel.org/r/20190513033458.2824-1-tobin@kernel.org
Signed-off-by: Tobin C. Harding <tobin@kernel.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mlxsw: spectrum: Prevent force of 56G

[ Upstream commit 275e928f19117d22f6d26dee94548baf4041b773 ]

Force of 56G is not supported by hardware in Ethernet devices. This
configuration fails with a bad parameter error from firmware.

Add check of this case. Instead of trying to set 56G with autoneg off,
return a meaningful error.

Fixes: 56ade8fe3fe1 ("mlxsw: spectrum: Add initial support for Spectrum ASIC")
Signed-off-by: Amit Cohen <amitc@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: libsas: delete sas port if expander discover failed

[ Upstream commit 3b0541791453fbe7f42867e310e0c9eb6295364d ]

The sas_port(phy->port) allocated in sas_ex_discover_expander() will not be
deleted when the expander failed to discover. This will cause resource leak
and a further issue of kernel BUG like below:

[159785.843156]  port-2:17:29: trying to add phy phy-2:17:29 fails: it's
already part of another port
[159785.852144] ------------[ cut here  ]------------
[159785.856833] kernel BUG at drivers/scsi/scsi_transport_sas.c:1086!
[159785.863000] Internal error: Oops - BUG: 0 [#1] SMP
[159785.867866] CPU: 39 PID: 16993 Comm: kworker/u96:2 Tainted: G
W  OE     4.19.25-vhulk1901.1.0.h111.aarch64 #1
[159785.878458] Hardware name: Huawei Technologies Co., Ltd.
Hi1620EVBCS/Hi1620EVBCS, BIOS Hi1620 CS B070 1P TA 03/21/2019
[159785.889231] Workqueue: 0000:74:02.0_disco_q sas_discover_domain
[159785.895224] pstate: 40c00009 (nZcv daif +PAN +UAO)
[159785.900094] pc : sas_port_add_phy+0x188/0x1b8
[159785.904524] lr : sas_port_add_phy+0x188/0x1b8
[159785.908952] sp : ffff0001120e3b80
[159785.912341] x29: ffff0001120e3b80 x28: 0000000000000000
[159785.917727] x27: ffff802ade8f5400 x26: ffff0000681b7560
[159785.923111] x25: ffff802adf11a800 x24: ffff0000680e8000
[159785.928496] x23: ffff802ade8f5728 x22: ffff802ade8f5708
[159785.933880] x21: ffff802adea2db40 x20: ffff802ade8f5400
[159785.939264] x19: ffff802adea2d800 x18: 0000000000000010
[159785.944649] x17: 00000000821bf734 x16: ffff00006714faa0
[159785.950033] x15: ffff0000e8ab4ecf x14: 7261702079646165
[159785.955417] x13: 726c612073277469 x12: ffff00006887b830
[159785.960802] x11: ffff00006773eaa0 x10: 7968702079687020
[159785.966186] x9 : 0000000000002453 x8 : 726f702072656874
[159785.971570] x7 : 6f6e6120666f2074 x6 : ffff802bcfb21290
[159785.976955] x5 : ffff802bcfb21290 x4 : 0000000000000000
[159785.982339] x3 : ffff802bcfb298c8 x2 : 337752b234c2ab00
[159785.987723] x1 : 337752b234c2ab00 x0 : 0000000000000000
[159785.993108] Process kworker/u96:2 (pid: 16993, stack limit =
0x0000000072dae094)
[159786.000576] Call trace:
[159786.003097]  sas_port_add_phy+0x188/0x1b8
[159786.007179]  sas_ex_get_linkrate.isra.5+0x134/0x140
[159786.012130]  sas_ex_discover_expander+0x128/0x408
[159786.016906]  sas_ex_discover_dev+0x218/0x4c8
[159786.021249]  sas_ex_discover_devices+0x9c/0x1a8
[159786.025852]  sas_discover_root_expander+0x134/0x160
[159786.030802]  sas_discover_domain+0x1b8/0x1e8
[159786.035148]  process_one_work+0x1b4/0x3f8
[159786.039230]  worker_thread+0x54/0x470
[159786.042967]  kthread+0x134/0x138
[159786.046269]  ret_from_fork+0x10/0x18
[159786.049918] Code: 91322300 f0004402 91178042 97fe4c9b (d4210000)
[159786.056083] Modules linked in: hns3_enet_ut(OE) hclge(OE) hnae3(OE)
hisi_sas_test_hw(OE) hisi_sas_test_main(OE) serdes(OE)
[159786.067202] ---[ end trace 03622b9e2d99e196  ]---
[159786.071893] Kernel panic - not syncing: Fatal exception
[159786.077190] SMP: stopping secondary CPUs
[159786.081192] Kernel Offset: disabled
[159786.084753] CPU features: 0x2,a2a00a38

Fixes: 2908d778ab3e ("[SCSI] aic94xx: new driver")
Reported-by: Jian Luo <luojian5@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
CC: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: scsi_dh_alua: Fix possible null-ptr-deref

[ Upstream commit 12e750bc62044de096ab9a95201213fd912b9994 ]

If alloc_workqueue fails in alua_init, it should return -ENOMEM, otherwise
it will trigger null-ptr-deref while unloading module which calls
destroy_workqueue dereference
wq->lock like this:

BUG: KASAN: null-ptr-deref in __lock_acquire+0x6b4/0x1ee0
Read of size 8 at addr 0000000000000080 by task syz-executor.0/7045

CPU: 0 PID: 7045 Comm: syz-executor.0 Tainted: G         C        5.1.0+ #28
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1
Call Trace:
 dump_stack+0xa9/0x10e
 __kasan_report+0x171/0x18d
 ? __lock_acquire+0x6b4/0x1ee0
 kasan_report+0xe/0x20
 __lock_acquire+0x6b4/0x1ee0
 lock_acquire+0xb4/0x1b0
 __mutex_lock+0xd8/0xb90
 drain_workqueue+0x25/0x290
 destroy_workqueue+0x1f/0x3f0
 __x64_sys_delete_module+0x244/0x330
 do_syscall_64+0x72/0x2a0
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes: 03197b61c5ec ("scsi_dh_alua: Use workqueue for RTPG")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: smartpqi: properly set both the DMA mask and the coherent DMA mask

[ Upstream commit 1d94f06e7f5df4064ef336b7b710f50143b64a53 ]

When SME is enabled, the smartpqi driver won't work on the HP DL385 G10
machine, which causes the failure of kernel boot because it fails to
allocate pqi error buffer. Please refer to the kernel log:
....
[    9.431749] usbcore: registered new interface driver uas
[    9.441524] Microsemi PQI Driver (v1.1.4-130)
[    9.442956] i40e 0000:04:00.0: fw 6.70.48768 api 1.7 nvm 10.2.5
[    9.447237] smartpqi 0000:23:00.0: Microsemi Smart Family Controller found
         Starting dracut initqueue hook...
[  OK  ] Started Show Plymouth Boot Scre[    9.471654] Broadcom NetXtreme-C/E driver bnxt_en v1.9.1
en.
[  OK  ] Started Forward Password Requests to Plymouth Directory Watch.
[[0;[    9.487108] smartpqi 0000:23:00.0: failed to allocate PQI error buffer
....
[  139.050544] dracut-initqueue[949]: Warning: dracut-initqueue timeout - starting timeout scripts
[  139.589779] dracut-initqueue[949]: Warning: dracut-initqueue timeout - starting timeout scripts

Basically, the fact that the coherent DMA mask value wasn't set caused the
driver to fall back to SWIOTLB when SME is active.

For correct operation, lets call the dma_set_mask_and_coherent() to
properly set the mask for both streaming and coherent, in order to inform
the kernel about the devices DMA addressing capabilities.

Signed-off-by: Lianbo Jiang <lijiang@redhat.com>
Acked-by: Don Brace <don.brace@microsemi.com>
Tested-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: libcxgbi: add a check for NULL pointer in cxgbi_check_route()

[ Upstream commit cc555759117e8349088e0c5d19f2f2a500bafdbd ]

ip_dev_find() can return NULL so add a check for NULL pointer.

Signed-off-by: Varun Prakash <varun@chelsio.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: phy: dp83867: Set up RGMII TX delay

[ Upstream commit 2b892649254fec01678c64f16427622b41fa27f4 ]

PHY_INTERFACE_MODE_RGMII_RXID is less then TXID
so code to set tx delay is never called.

Fixes: 2a10154abcb75 ("net: phy: dp83867: Add TI dp83867 phy")
Signed-off-by: Max Uvarov <muvarov@gmail.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: phy: dp83867: increase SGMII autoneg timer duration

[ Upstream commit 1a97a477e666cbdededab93bd3754e508f0c09d7 ]

After reset SGMII Autoneg timer is set to 2us (bits 6 and 5 are 01).
That is not enough to finalize autonegatiation on some devices.
Increase this timer duration to maximum supported 16ms.

Signed-off-by: Max Uvarov <muvarov@gmail.com>
Cc: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: phy: dp83867: fix speed 10 in sgmii mode

[ Upstream commit 333061b924539c0de081339643f45514f5f1c1e6 ]

For supporting 10Mps speed in SGMII mode DP83867_10M_SGMII_RATE_ADAPT bit
of DP83867_10M_SGMII_CFG register has to be cleared by software.
That does not affect speeds 100 and 1000 so can be done on init.

Signed-off-by: Max Uvarov <muvarov@gmail.com>
Cc: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: phylink: ensure consistent phy interface mode

[ Upstream commit c678726305b9425454be7c8a7624290b602602fc ]

Ensure that we supply the same phy interface mode to mac_link_down() as
we did for the corresponding mac_link_up() call.  This ensures that MAC
drivers that use the phy interface mode in these methods can depend on
mac_link_down() always corresponding to a mac_link_up() call for the
same interface mode.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

blk-mq: Fix memory leak in error handling

[ Upstream commit 41de54c64811bf087c8464fdeb43c6ad8be2686b ]

If blk_mq_init_allocated_queue() fails, make sure to free the poll
stat callback struct allocated.

Signed-off-by: Jes Sorensen <jsorensen@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: sh_eth: fix mdio access in sh_eth_close() for R-Car Gen2 and RZ/A1 SoCs

[ Upstream commit 315ca92dd863fecbffc0bb52ae0ac11e0398726a ]

The sh_eth_close() resets the MAC and then calls phy_stop()
so that mdio read access result is incorrect without any error
according to kernel trace like below:

ifconfig-216   [003] .n..   109.133124: mdio_access: ee700000.ethernet-ffffffff read  phy:0x01 reg:0x00 val:0xffff

According to the hardware manual, the RMII mode should be set to 1
before operation the Ethernet MAC. However, the previous code was not
set to 1 after the driver issued the soft_reset in sh_eth_dev_exit()
so that the mdio read access result seemed incorrect. To fix the issue,
this patch adds a condition and set the RMII mode register in
sh_eth_dev_exit() for R-Car Gen2 and RZ/A1 SoCs.

Note that when I have tried to move the sh_eth_dev_exit() calling
after phy_stop() on sh_eth_close(), but it gets worse (kernel panic
happened and it seems that a register is accessed while the clock is
off).

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: use the correct function type for __arm64_sys_ni_syscall

[ Upstream commit 1e29ab3186e33c77dbb2d7566172a205b59fa390 ]

Calling sys_ni_syscall through a syscall_fn_t pointer trips indirect
call Control-Flow Integrity checking due to a function type
mismatch. Use SYSCALL_DEFINE0 for __arm64_sys_ni_syscall instead and
remove the now unnecessary casts.

Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: use the correct function type in SYSCALL_DEFINE0

[ Upstream commit 0e358bd7b7ebd27e491dabed938eae254c17fe3b ]

Although a syscall defined using SYSCALL_DEFINE0 doesn't accept
parameters, use the correct function type to avoid indirect call
type mismatches with Control-Flow Integrity checking.

Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: fix syscall_fn_t type

[ Upstream commit 8ef8f368ce72b5e17f7c1f1ef15c38dcfd0fef64 ]

Syscall wrappers in <asm/syscall_wrapper.h> use const struct pt_regs *
as the argument type. Use const in syscall_fn_t as well to fix indirect
call type mismatches with Control-Flow Integrity checking.

Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: fireface: Use ULL suffixes for 64-bit constants

[ Upstream commit 6954158a16404e7091cea494cd0a435ca2f90388 ]

With gcc 4.1:

    sound/firewire/fireface/ff-protocol-latter.c: In function ‘latter_switch_fetching_mode’:
    sound/firewire/fireface/ff-protocol-latter.c:97: warning: integer constant is too large for ‘long’ type
    sound/firewire/fireface/ff-protocol-latter.c: In function ‘latter_begin_session’:
    sound/firewire/fireface/ff-protocol-latter.c:170: warning: integer constant is too large for ‘long’ type
    sound/firewire/fireface/ff-protocol-latter.c:197: warning: integer constant is too large for ‘long’ type
    sound/firewire/fireface/ff-protocol-latter.c:205: warning: integer constant is too large for ‘long’ type
    sound/firewire/fireface/ff-protocol-latter.c: In function ‘latter_finish_session’:
    sound/firewire/fireface/ff-protocol-latter.c:214: warning: integer constant is too large for ‘long’ type

Fix this by adding the missing "ULL" suffixes.
Add the same suffix to the last constant, to maintain consistency.

Fixes: fd1cc9de64c2ca6c ("ALSA: fireface: add support for Fireface UCX")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

KVM: PPC: Book3S HV: Don't take kvm->lock around kvm_for_each_vcpu

[ Upstream commit 5a3f49364c3ffa1107bd88f8292406e98c5d206c ]

Currently the HV KVM code takes the kvm->lock around calls to
kvm_for_each_vcpu() and kvm_get_vcpu_by_id() (which can call
kvm_for_each_vcpu() internally).  However, that leads to a lock
order inversion problem, because these are called in contexts where
the vcpu mutex is held, but the vcpu mutexes nest within kvm->lock
according to Documentation/virtual/kvm/locking.txt.  Hence there
is a possibility of deadlock.

To fix this, we simply don't take the kvm->lock mutex around these
calls.  This is safe because the implementations of kvm_for_each_vcpu()
and kvm_get_vcpu_by_id() have been designed to be able to be called
locklessly.

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

KVM: PPC: Book3S: Use new mutex to synchronize access to rtas token list

[ Upstream commit 1659e27d2bc1ef47b6d031abe01b467f18cb72d9 ]

Currently the Book 3S KVM code uses kvm->lock to synchronize access
to the kvm->arch.rtas_tokens list.  Because this list is scanned
inside kvmppc_rtas_hcall(), which is called with the vcpu mutex held,
taking kvm->lock cause a lock inversion problem, which could lead to
a deadlock.

To fix this, we add a new mutex, kvm->arch.rtas_token_lock, which nests
inside the vcpu mutexes, and use that instead of kvm->lock when
accessing the rtas token list.

This removes the lockdep_assert_held() in kvmppc_rtas_tokens_free().
At this point we don't hold the new mutex, but that is OK because
kvmppc_rtas_tokens_free() is only called when the whole VM is being
destroyed, and at that point nothing can be looking up a token in
the list.

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

KVM: PPC: Book3S HV: Use new mutex to synchronize MMU setup

[ Upstream commit 0d4ee88d92884c661fcafd5576da243aa943dc24 ]

Currently the HV KVM code uses kvm->lock in conjunction with a flag,
kvm->arch.mmu_ready, to synchronize MMU setup and hold off vcpu
execution until the MMU-related data structures are ready.  However,
this means that kvm->lock is being taken inside vcpu->mutex, which
is contrary to Documentation/virtual/kvm/locking.txt and results in
lockdep warnings.

To fix this, we add a new mutex, kvm->arch.mmu_setup_lock, which nests
inside the vcpu mutexes, and is taken in the places where kvm->lock
was taken that are related to MMU setup.

Additionally we take the new mutex in the vcpu creation code at the
point where we are creating a new vcore, in order to provide mutual
exclusion with kvmppc_update_lpcr() and ensure that an update to
kvm->arch.lpcr doesn't get missed, which could otherwise lead to a
stale vcore->lpcr value.

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dfs_cache: fix a wrong use of kfree in flush_cache_ent()

[ Upstream commit 50fbc13dc12666f3604dc2555a47fc8c4e29162b ]

In flush_cache_ent(), 'ce->ce_path' is allocated by kstrdup_const().
It should be freed by kfree_const(), rather than kfree().

Signed-off-by: Gen Zhang <blackgod016574@gmail.com>
Reviewed-by: Paulo Alcantara <palcantara@suse.de>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

xenbus: Avoid deadlock during suspend due to open transactions

[ Upstream commit d10e0cc113c9e1b64b5c6e3db37b5c839794f3df ]

During a suspend/resume, the xenwatch thread waits for all outstanding
xenstore requests and transactions to complete. This does not work
correctly for transactions started by userspace because it waits for
them to complete after freezing userspace threads which means the
transactions have no way of completing, resulting in a deadlock. This is
trivial to reproduce by running this script and then suspending the VM:

    import pyxs, time
    c = pyxs.client.Client(xen_bus_path="/dev/xen/xenbus")
    c.connect()
    c.transaction()
    time.sleep(3600)

Even if this deadlock were resolved, misbehaving userspace should not
prevent a VM from being migrated. So, instead of waiting for these
transactions to complete before suspending, store the current generation
id for each transaction when it is started. The global generation id is
incremented during resume. If the caller commits the transaction and the
generation id does not match the current generation id, return EAGAIN so
that they try again. If the transaction was instead discarded, return OK
since no changes were made anyway.

This only affects users of the xenbus file interface. In-kernel users of
xenbus are assumed to be well-behaved and complete all transactions
before freezing.

Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

xen/pvcalls: Remove set but not used variable

[ Upstream commit 41349672e3cbc2e8349831f21253509c3415aa2b ]

Fixes gcc '-Wunused-but-set-variable' warning:

drivers/xen/pvcalls-front.c: In function pvcalls_front_sendmsg:
drivers/xen/pvcalls-front.c:543:25: warning: variable bedata set but not used [-Wunused-but-set-variable]
drivers/xen/pvcalls-front.c: In function pvcalls_front_recvmsg:
drivers/xen/pvcalls-front.c:638:25: warning: variable bedata set but not used [-Wunused-but-set-variable]

They are never used since introduction.

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dpaa_eth: use only online CPU portals

[ Upstream commit 7aae703f8096d21e34ce5f34f16715587bc30902 ]

Make sure only the portals for the online CPUs are used.
Without this change, there are issues when someone boots with
maxcpus=n, with n < actual number of cores available as frames
either received or corresponding to the transmit confirmation
path would be offered for dequeue to the offline CPU portals,
getting lost.

Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ia64: fix build errors by exporting paddr_to_nid()

[ Upstream commit 9a626c4a6326da4433a0d4d4a8a7d1571caf1ed3 ]

Fix build errors on ia64 when DISCONTIGMEM=y and NUMA=y by
exporting paddr_to_nid().

Fixes these build errors:

ERROR: "paddr_to_nid" [sound/core/snd-pcm.ko] undefined!
ERROR: "paddr_to_nid" [net/sunrpc/sunrpc.ko] undefined!
ERROR: "paddr_to_nid" [fs/cifs/cifs.ko] undefined!
ERROR: "paddr_to_nid" [drivers/video/fbdev/core/fb.ko] undefined!
ERROR: "paddr_to_nid" [drivers/usb/mon/usbmon.ko] undefined!
ERROR: "paddr_to_nid" [drivers/usb/core/usbcore.ko] undefined!
ERROR: "paddr_to_nid" [drivers/md/raid1.ko] undefined!
ERROR: "paddr_to_nid" [drivers/md/dm-mod.ko] undefined!
ERROR: "paddr_to_nid" [drivers/md/dm-crypt.ko] undefined!
ERROR: "paddr_to_nid" [drivers/md/dm-bufio.ko] undefined!
ERROR: "paddr_to_nid" [drivers/ide/ide-core.ko] undefined!
ERROR: "paddr_to_nid" [drivers/ide/ide-cd_mod.ko] undefined!
ERROR: "paddr_to_nid" [drivers/gpu/drm/drm.ko] undefined!
ERROR: "paddr_to_nid" [drivers/char/agp/agpgart.ko] undefined!
ERROR: "paddr_to_nid" [drivers/block/nbd.ko] undefined!
ERROR: "paddr_to_nid" [drivers/block/loop.ko] undefined!
ERROR: "paddr_to_nid" [drivers/block/brd.ko] undefined!
ERROR: "paddr_to_nid" [crypto/ccm.ko] undefined!

Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: linux-ia64@vger.kernel.org
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf record: Fix s390 missing module symbol and warning for non-root users

[ Upstream commit 6738028dd57df064b969d8392c943ef3b3ae705d ]

Command 'perf record' and 'perf report' on a system without kernel
debuginfo packages uses /proc/kallsyms and /proc/modules to find
addresses for kernel and module symbols. On x86 this works for root and
non-root users.

On s390, when invoked as non-root user, many of the following warnings
are shown and module symbols are missing:

    proc/{kallsyms,modules} inconsistency while looking for
        "[sha1_s390]" module!

Command 'perf record' creates a list of module start addresses by
parsing the output of /proc/modules and creates a PERF_RECORD_MMAP
record for the kernel and each module. The following function call
sequence is executed:

  machine__create_kernel_maps
    machine__create_module
      modules__parse
        machine__create_module --> for each line in /proc/modules
          arch__fix_module_text_start

Function arch__fix_module_text_start() is s390 specific. It opens
file /sys/module/<name>/sections/.text to extract the module's .text
section start address. On s390 the module loader prepends a header
before the first section, whereas on x86 the module's text section
address is identical the the module's load address.

However module section files are root readable only. For non-root the
read operation fails and machine__create_module() returns an error.
Command perf record does not generate any PERF_RECORD_MMAP record
for loaded modules. Later command perf report complains about missing
module maps.

To fix this function arch__fix_module_text_start() always returns
success. For root users there is no change, for non-root users
the module's load address is used as module's text start address
(the prepended header then counts as part of the text section).

This enable non-root users to use module symbols and avoid the
warning when perf report is executed.

Output before:

  [tmricht@m83lp54 perf]$ ./perf report -D | fgrep MMAP
  0 0x168 [0x50]: PERF_RECORD_MMAP ... x [kernel.kallsyms]_text

Output after:

  [tmricht@m83lp54 perf]$ ./perf report -D | fgrep MMAP
  0 0x168 [0x50]: PERF_RECORD_MMAP ... x [kernel.kallsyms]_text
  0 0x1b8 [0x98]: PERF_RECORD_MMAP ... x /lib/modules/.../autofs4.ko.xz
  0 0x250 [0xa8]: PERF_RECORD_MMAP ... x /lib/modules/.../sha_common.ko.xz
  0 0x2f8 [0x98]: PERF_RECORD_MMAP ... x /lib/modules/.../des_generic.ko.xz

Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Link: http://lkml.kernel.org/r/20190522144601.50763-4-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf namespace: Protect reading thread's namespace

[ Upstream commit 6584140ba9e6762dd7ec73795243289b914f31f9 ]

It seems that the current code lacks holding the namespace lock in
thread__namespaces().  Otherwise it can see inconsistent results.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Hari Bathini <hbathini@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Krister Johansen <kjlx@templeofstupid.com>
Link: http://lkml.kernel.org/r/20190522053250.207156-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

s390/zcrypt: Fix wrong dispatching for control domain CPRBs

[ Upstream commit 7379e652797c0b9b5f6caea1576f2dff9ce6a708 ]

The zcrypt device driver does not handle CPRBs which address
a control domain correctly. This fix introduces a workaround:
The domain field of the request CPRB is checked if there is
a valid domain value in there. If this is true and the value
is a control only domain (a domain which is enabled in the
crypto config ADM mask but disabled in the AQM mask) the
CPRB is forwarded to the default usage domain. If there is
no default domain, the request is rejected with an ENODEV.

This fix is important for maintaining crypto adapters. For
example one LPAR can use a crypto adapter domain ('Control
and Usage') but another LPAR needs to be able to maintain
this adapter domain ('Control'). Scenarios like this did
not work properly and the patch enables this.

Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf data: Fix 'strncat may truncate' build failure with recent gcc

[ Upstream commit 97acec7df172cd1e450f81f5e293c0aa145a2797 ]

This strncat() is safe because the buffer was allocated with zalloc(),
however gcc doesn't know that. Since the string always has 4 non-null
bytes, just use memcpy() here.

    CC       /home/shawn/linux/tools/perf/util/data-convert-bt.o
  In file included from /usr/include/string.h:494,
                   from /home/shawn/linux/tools/lib/traceevent/event-parse.h:27,
                   from util/data-convert-bt.c:22:
  In function ‘strncat’,
      inlined from ‘string_set_value’ at util/data-convert-bt.c:274:4:
  /usr/include/powerpc64le-linux-gnu/bits/string_fortified.h:136:10: error: ‘__builtin_strncat’ output may be truncated copying 4 bytes from a string of length 4 [-Werror=stringop-truncation]
    136 |   return __builtin___strncat_chk (__dest, __src, __len, __bos (__dest));
        |          ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Signed-off-by: Shawn Landden <shawn@git.icu>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
LPU-Reference: 20190518183238.10954-1-shawn@git.icu
Link: https://lkml.kernel.org/n/tip-289f1jice17ta7tr3tstm9jm@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

configfs: Fix use-after-free when accessing sd->s_dentry

[ Upstream commit f6122ed2a4f9c9c1c073ddf6308d1b2ac10e0781 ]

In the vfs_statx() context, during path lookup, the dentry gets
added to sd->s_dentry via configfs_attach_attr(). In the end,
vfs_statx() kills the dentry by calling path_put(), which invokes
configfs_d_iput(). Ideally, this dentry must be removed from
sd->s_dentry but it doesn't if the sd->s_count >= 3. As a result,
sd->s_dentry is holding reference to a stale dentry pointer whose
memory is already freed up. This results in use-after-free issue,
when this stale sd->s_dentry is accessed later in
configfs_readdir() path.

This issue can be easily reproduced, by running the LTP test case -
sh fs_racer_file_list.sh /config
(https://github.com/linux-test-project/ltp/blob/master/testcases/kernel/fs/racer/fs_racer_file_list.sh)

Fixes: 76ae281f6307 ('configfs: fix race between dentry put and lookup')
Signed-off-by: Sahitya Tummala <stummala@codeaurora.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: hda - Force polling mode on CNL for fixing codec communication

[ Upstream commit fa763f1b2858752e6150ffff46886a1b7faffc82 ]

We observed the same issue as reported by commit a8d7bde23e7130686b7662
("ALSA: hda - Force polling mode on CFL for fixing codec communication")
We don't have a better solution. So apply the same workaround to CNL.

Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

i2c: dev: fix potential memory leak in i2cdev_ioctl_rdwr

[ Upstream commit a0692f0eef91354b62c2b4c94954536536be5425 ]

If I2C_M_RECV_LEN check failed, msgs[i].buf allocated by memdup_user
will not be freed. Pump index up so it will be freed.

Fixes: 838bfa6049fb ("i2c-dev: Add support for I2C_M_RECV_LEN")
Signed-off-by: Yingjoe Chen <yingjoe.chen@mediatek.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: aquantia: fix LRO with FCS error

[ Upstream commit eaeb3b7494ba9159323814a8ce8af06a9277d99b ]

Driver stops producing skbs on ring if a packet with FCS error
was coalesced into LRO session. Ring gets hang forever.

Thats a logical error in driver processing descriptors:
When rx_stat indicates MAC Error, next pointer and eop flags
are not filled. This confuses driver so it waits for descriptor 0
to be filled by HW.

Solution is fill next pointer and eop flag even for packets with FCS error.

Fixes: bab6de8fd180b ("net: ethernet: aquantia: Atlantic A0 and B0 specific functions.")
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: Dmitry Bogdanov <dmitry.bogdanov@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: aquantia: tx clean budget logic error

[ Upstream commit 31bafc49a7736989e4c2d9f7280002c66536e590 ]

In case no other traffic happening on the ring, full tx cleanup
may not be completed. That may cause socket buffer to overflow
and tx traffic to stuck until next activity on the ring happens.

This is due to logic error in budget variable decrementor.
Variable is compared with zero, and then post decremented,
causing it to become MAX_INT. Solution is remove decrementor
from the `for` statement and rewrite it in a clear way.

Fixes: b647d3980948e ("net: aquantia: Add tx clean budget and valid budget handling logic")
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/etnaviv: lock MMU while dumping core

[ Upstream commit 1396500d673bd027683a0609ff84dca7eb6ea2e7 ]

The devcoredump needs to operate on a stable state of the MMU while
it is writing the MMU state to the coredump. The missing lock
allowed both the userspace submit, as well as the GPU job finish
paths to mutate the MMU state while a coredump is under way.

Fixes: a8c21a5451d8 (drm/etnaviv: add initial etnaviv DRM driver)
Reported-by: David Jander <david@protonic.nl>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Tested-by: David Jander <david@protonic.nl>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ACPI/PCI: PM: Add missing wakeup.flags.valid checks

[ Upstream commit 9a51c6b1f9e0239a9435db036b212498a2a3b75c ]

Both acpi_pci_need_resume() and acpi_dev_needs_resume() check if the
current ACPI wakeup configuration of the device matches what is
expected as far as system wakeup from sleep states is concerned, as
reflected by the device_may_wakeup() return value for the device.

However, they only should do that if wakeup.flags.valid is set for
the device's ACPI companion, because otherwise the wakeup.prepare_count
value for it is meaningless.

Add the missing wakeup.flags.valid checks to these functions.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: tulip: de4x5: Drop redundant MODULE_DEVICE_TABLE()

[ Upstream commit 3e66b7cc50ef921121babc91487e1fb98af1ba6e ]

Building with Clang reports the redundant use of MODULE_DEVICE_TABLE():

drivers/net/ethernet/dec/tulip/de4x5.c:2110:1: error: redefinition of '__mod_eisa__de4x5_eisa_ids_device_table'
MODULE_DEVICE_TABLE(eisa, de4x5_eisa_ids);
^
./include/linux/module.h:229:21: note: expanded from macro 'MODULE_DEVICE_TABLE'
extern typeof(name) __mod_##type##__##name##_device_table               \
                    ^
<scratch space>:90:1: note: expanded from here
__mod_eisa__de4x5_eisa_ids_device_table
^
drivers/net/ethernet/dec/tulip/de4x5.c:2100:1: note: previous definition is here
MODULE_DEVICE_TABLE(eisa, de4x5_eisa_ids);
^
./include/linux/module.h:229:21: note: expanded from macro 'MODULE_DEVICE_TABLE'
extern typeof(name) __mod_##type##__##name##_device_table               \
                    ^
<scratch space>:85:1: note: expanded from here
__mod_eisa__de4x5_eisa_ids_device_table
^

This drops the one further from the table definition to match the common
use of MODULE_DEVICE_TABLE().

Fixes: 07563c711fbc ("EISA bus MODALIAS attributes support")
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dpaa2-eth: Use PTR_ERR_OR_ZERO where appropriate

[ Upstream commit bd8460fa4de46e9d6177af4fe33bf0763a7af4b7 ]

Use PTR_ERR_OR_ZERO instead of PTR_ERR in cases where
zero is a valid input. Reported by smatch.

Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dpaa2-eth: Fix potential spectre issue

[ Upstream commit 5a20a093d965560f632b2ec325f8876918f78165 ]

Smatch reports a potential spectre vulnerability in the dpaa2-eth
driver, where the value of rxnfc->fs.location (which is provided
from user-space) is used as index in an array.

Add a call to array_index_nospec() to sanitize the access.

Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

io_uring: Fix __io_uring_register() false success

[ Upstream commit a278682dad37fd2f8d2f30d8e84e376a856ab472 ]

If io_copy_iov() fails, it will break the loop and report success,
albeit partially completed operation.

Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: stmmac: dwmac-mediatek: modify csr_clk value to fix mdio read/write fail

[ Upstream commit f4ca7a9260dfe700f2a16f0881825de625067515 ]

1. the frequency of csr clock is 66.5MHz, so the csr_clk value should
be 0 other than 5.
2. the csr_clk can be got from device tree, so remove initialization here.

Fixes: 9992f37e346b ("stmmac: dwmac-mediatek: add support for mt2712")
Signed-off-by: Biao Huang <biao.huang@mediatek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: stmmac: fix csr_clk can't be zero issue

[ Upstream commit 5e7f7fc538d894b2d9aa41876b8dcf35f5fe11e6 ]

The specific clk_csr value can be zero, and
stmmac_clk is necessary for MDC clock which can be set dynamically.
So, change the condition from plat->clk_csr to plat->stmmac_clk to
fix clk_csr can't be zero issue.

Fixes: cd7201f477b9 ("stmmac: MDC clock dynamically based on the csr clock input")
Signed-off-by: Biao Huang <biao.huang@mediatek.com>
Acked-by: Alexandre TORGUE <alexandre.torgue@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: stmmac: update rx tail pointer register to fix rx dma hang issue.

[ Upstream commit 4523a5611526709ec9b4e2574f1bb7818212651e ]

Currently we will not update the receive descriptor tail pointer in
stmmac_rx_refill. Rx dma will think no available descriptors and stop
once received packets exceed DMA_RX_SIZE, so that the rx only test will fail.

Update the receive tail pointer in stmmac_rx_refill to add more descriptors
to the rx channel, so packets can be received continually

Fixes: 54139cf3bb33 ("net: stmmac: adding multiple buffers for rx")
Signed-off-by: Biao Huang <biao.huang@mediatek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

gpio: fix gpio-adp5588 build errors

[ Upstream commit e9646f0f5bb62b7d43f0968f39d536cfe7123b53 ]

The gpio-adp5588 driver uses interfaces that are provided by
GPIOLIB_IRQCHIP, so select that symbol in its Kconfig entry.

Fixes these build errors:

../drivers/gpio/gpio-adp5588.c: In function ‘adp5588_irq_handler’:
../drivers/gpio/gpio-adp5588.c:266:26: error: ‘struct gpio_chip’ has no member named ‘irq’
            dev->gpio_chip.irq.domain, gpio));
                          ^
../drivers/gpio/gpio-adp5588.c: In function ‘adp5588_irq_setup’:
../drivers/gpio/gpio-adp5588.c:298:2: error: implicit declaration of function ‘gpiochip_irqchip_add_nested’ [-Werror=implicit-function-declaration]
  ret = gpiochip_irqchip_add_nested(&dev->gpio_chip,
  ^
../drivers/gpio/gpio-adp5588.c:307:2: error: implicit declaration of function ‘gpiochip_set_nested_irqchip’ [-Werror=implicit-function-declaration]
  gpiochip_set_nested_irqchip(&dev->gpio_chip,
  ^

Fixes: 459773ae8dbb ("gpio: adp5588-gpio: support interrupt controller")
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: linux-gpio@vger.kernel.org
Reviewed-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf/ring-buffer: Always use {READ,WRITE}_ONCE() for rb->user_page data

[ Upstream commit 4d839dd9e4356bbacf3eb0ab13a549b83b008c21 ]

We must use {READ,WRITE}_ONCE() on rb->user_page data such that
concurrent usage will see whole values. A few key sites were missing
this.

Suggested-by: Yabin Cui <yabinc@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: acme@kernel.org
Cc: mark.rutland@arm.com
Cc: namhyung@kernel.org
Fixes: 7b732a750477 ("perf_counter: new output ABI - part 1")
Link: http://lkml.kernel.org/r/20190517115418.394192145@infradead.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf/ring_buffer: Add ordering to rb->nest increment

[ Upstream commit 3f9fbe9bd86c534eba2faf5d840fd44c6049f50e ]

Similar to how decrementing rb->next too early can cause data_head to
(temporarily) be observed to go backward, so too can this happen when
we increment too late.

This barrier() ensures the rb->head load happens after the increment,
both the one in the 'goto again' path, as the one from
perf_output_get_handle() -- albeit very unlikely to matter for the
latter.

Suggested-by: Yabin Cui <yabinc@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: acme@kernel.org
Cc: mark.rutland@arm.com
Cc: namhyung@kernel.org
Fixes: ef60777c9abd ("perf: Optimize the perf_output() path by removing IRQ-disables")
Link: http://lkml.kernel.org/r/20190517115418.309516009@infradead.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf/ring_buffer: Fix exposing a temporarily decreased data_head

[ Upstream commit 1b038c6e05ff70a1e66e3e571c2e6106bdb75f53 ]

In perf_output_put_handle(), an IRQ/NMI can happen in below location and
write records to the same ring buffer:

...
local_dec_and_test(&rb->nest)
...                          <-- an IRQ/NMI can happen here
rb->user_page->data_head = head;
...

In this case, a value A is written to data_head in the IRQ, then a value
B is written to data_head after the IRQ. And A > B. As a result,
data_head is temporarily decreased from A to B. And a reader may see
data_head < data_tail if it read the buffer frequently enough, which
creates unexpected behaviors.

This can be fixed by moving dec(&rb->nest) to after updating data_head,
which prevents the IRQ/NMI above from updating data_head.

[ Split up by peterz. ]

Signed-off-by: Yabin Cui <yabinc@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: mark.rutland@arm.com
Fixes: ef60777c9abd ("perf: Optimize the perf_output() path by removing IRQ-disables")
Link: http://lkml.kernel.org/r/20190517115418.224478157@infradead.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

x86/CPU/AMD: Don't force the CPB cap when running under a hypervisor

[ Upstream commit 2ac44ab608705948564791ce1d15d43ba81a1e38 ]

For F17h AMD CPUs, the CPB capability ('Core Performance Boost') is forcibly set,
because some versions of that chip incorrectly report that they do not have it.

However, a hypervisor may filter out the CPB capability, for good
reasons. For example, KVM currently does not emulate setting the CPB
bit in MSR_K7_HWCR, and unchecked MSR access errors will be thrown
when trying to set it as a guest:

unchecked MSR access error: WRMSR to 0xc0010015 (tried to write 0x0000000001000011) at rIP: 0xffffffff890638f4 (native_write_msr+0x4/0x20)

Call Trace:
boost_set_msr+0x50/0x80 [acpi_cpufreq]
cpuhp_invoke_callback+0x86/0x560
sort_range+0x20/0x20
cpuhp_thread_fun+0xb0/0x110
smpboot_thread_fn+0xef/0x160
kthread+0x113/0x130
kthread_create_worker_on_cpu+0x70/0x70
ret_from_fork+0x35/0x40

To avoid this issue, don't forcibly set the CPB capability for a CPU
when running under a hypervisor.

Signed-off-by: Frank van der Linden <fllinden@amazon.com>
Acked-by: Borislav Petkov <bp@suse.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: bp@alien8.de
Cc: jiaxun.yang@flygoat.com
Fixes: 0237199186e7 ("x86/CPU/AMD: Set the CPB bit unconditionally on F17h")
Link: http://lkml.kernel.org/r/20190522221745.GA15789@dev-dsk-fllinden-2c-c1893d73.us-west-2.amazon.com
[ Minor edits to the changelog. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mISDN: make sure device name is NUL terminated

[ Upstream commit ccfb62f27beb295103e9392462b20a6ed807d0ea ]

The user can change the device_name with the IMSETDEVNAME ioctl, but we
need to ensure that the user's name is NUL terminated.  Otherwise it
could result in a buffer overflow when we copy the name back to the user
with IMGETDEVINFO ioctl.

I also changed two strcpy() calls which handle the name to strscpy().
Hopefully, there aren't any other ways to create a too long name, but
it's nice to do this as a kernel hardening measure.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: xhci: Fix a potential null pointer dereference in xhci_debugfs_create_endpoint()

[ Upstream commit 5bce256f0b528624a34fe907db385133bb7be33e ]

In xhci_debugfs_create_slot(), kzalloc() can fail and
dev->debugfs_private will be NULL.
In xhci_debugfs_create_endpoint(), dev->debugfs_private is used without
any null-pointer check, and can cause a null pointer dereference.

To fix this bug, a null-pointer check is added in
xhci_debugfs_create_endpoint().

This bug is found by a runtime fuzzing tool named FIZZER written by us.

[subjet line change change, add potential -Mathais]
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/powernv: Return for invalid IMC domain

[ Upstream commit b59bd3527fe3c1939340df558d7f9d568fc9f882 ]

Currently init_imc_pmu() can fail either because we try to register an
IMC unit with an invalid domain (i.e an IMC node not supported by the
kernel) or something went wrong while registering a valid IMC unit. In
both the cases kernel provides a 'Register failed' error message.

For example when trace-imc node is not supported by the kernel, but
skiboot advertises a trace-imc node we print:

  IMC Unknown Device type
  IMC PMU (null) Register failed

To avoid confusion just print the unknown device type message, before
attempting PMU registration, so the second message isn't printed.

Fixes: 8f95faaac56c ("powerpc/powernv: Detect and create IMC device")
Reported-by: Pavaman Subramaniyam <pavsubra@in.ibm.com>
Signed-off-by: Anju T Sudhakar <anju@linux.vnet.ibm.com>
Reviewed-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
[mpe: Reword change log a bit]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: ti: clkctrl: Fix clkdm_clk handling

[ Upstream commit 1cc54078d104f5b4d7e9f8d55362efa5a8daffdb ]

We need to always call clkdm_clk_enable() and clkdm_clk_disable() even
the clkctrl clock(s) enabled for the domain do not have any gate register
bits. Otherwise clockdomains may never get enabled except when devices get
probed with the legacy "ti,hwmods" devicetree property.

Fixes: 88a172526c32 ("clk: ti: add support for clkctrl clocks")
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests: netfilter: missing error check when setting up veth interface

[ Upstream commit 82ce6eb1dd13fd12e449b2ee2c2ec051e6f52c43 ]

A test for the basic NAT functionality uses ip command which needs veth
device. There is a condition where the kernel support for veth is not
compiled into the kernel and the test script breaks. This patch contains
code for reasonable error display and correct code exit.

Signed-off-by: Jeffrin Jose T <jeffrin@rajagiritech.edu.in>
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ipvs: Fix use-after-free in ip_vs_in

[ Upstream commit 719c7d563c17b150877cee03a4b812a424989dfa ]

BUG: KASAN: use-after-free in ip_vs_in.part.29+0xe8/0xd20 [ip_vs]
Read of size 4 at addr ffff8881e9b26e2c by task sshd/5603

CPU: 0 PID: 5603 Comm: sshd Not tainted 4.19.39+ #30
Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
Call Trace:
 dump_stack+0x71/0xab
 print_address_description+0x6a/0x270
 kasan_report+0x179/0x2c0
 ip_vs_in.part.29+0xe8/0xd20 [ip_vs]
 ip_vs_in+0xd8/0x170 [ip_vs]
 nf_hook_slow+0x5f/0xe0
 __ip_local_out+0x1d5/0x250
 ip_local_out+0x19/0x60
 __tcp_transmit_skb+0xba1/0x14f0
 tcp_write_xmit+0x41f/0x1ed0
 ? _copy_from_iter_full+0xca/0x340
 __tcp_push_pending_frames+0x52/0x140
 tcp_sendmsg_locked+0x787/0x1600
 ? tcp_sendpage+0x60/0x60
 ? inet_sk_set_state+0xb0/0xb0
 tcp_sendmsg+0x27/0x40
 sock_sendmsg+0x6d/0x80
 sock_write_iter+0x121/0x1c0
 ? sock_sendmsg+0x80/0x80
 __vfs_write+0x23e/0x370
 vfs_write+0xe7/0x230
 ksys_write+0xa1/0x120
 ? __ia32_sys_read+0x50/0x50
 ? __audit_syscall_exit+0x3ce/0x450
 do_syscall_64+0x73/0x200
 entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x7ff6f6147c60
Code: 73 01 c3 48 8b 0d 28 12 2d 00 f7 d8 64 89 01 48 83 c8 ff c3 66 0f 1f 44 00 00 83 3d 5d 73 2d 00 00 75 10 b8 01 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 31 c3 48 83
RSP: 002b:00007ffd772ead18 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 0000000000000034 RCX: 00007ff6f6147c60
RDX: 0000000000000034 RSI: 000055df30a31270 RDI: 0000000000000003
RBP: 000055df30a31270 R08: 0000000000000000 R09: 0000000000000000
R10: 00007ffd772ead70 R11: 0000000000000246 R12: 00007ffd772ead74
R13: 00007ffd772eae20 R14: 00007ffd772eae24 R15: 000055df2f12ddc0

Allocated by task 6052:
 kasan_kmalloc+0xa0/0xd0
 __kmalloc+0x10a/0x220
 ops_init+0x97/0x190
 register_pernet_operations+0x1ac/0x360
 register_pernet_subsys+0x24/0x40
 0xffffffffc0ea016d
 do_one_initcall+0x8b/0x253
 do_init_module+0xe3/0x335
 load_module+0x2fc0/0x3890
 __do_sys_finit_module+0x192/0x1c0
 do_syscall_64+0x73/0x200
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

Freed by task 6067:
 __kasan_slab_free+0x130/0x180
 kfree+0x90/0x1a0
 ops_free_list.part.7+0xa6/0xc0
 unregister_pernet_operations+0x18b/0x1f0
 unregister_pernet_subsys+0x1d/0x30
 ip_vs_cleanup+0x1d/0xd2f [ip_vs]
 __x64_sys_delete_module+0x20c/0x300
 do_syscall_64+0x73/0x200
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

The buggy address belongs to the object at ffff8881e9b26600 which belongs to the cache kmalloc-4096 of size 4096
The buggy address is located 2092 bytes inside of 4096-byte region [ffff8881e9b26600, ffff8881e9b27600)
The buggy address belongs to the page:
page:ffffea0007a6c800 count:1 mapcount:0 mapping:ffff888107c0e600 index:0x0 compound_mapcount: 0
flags: 0x17ffffc0008100(slab|head)
raw: 0017ffffc0008100 dead000000000100 dead000000000200 ffff888107c0e600
raw: 0000000000000000 0000000080070007 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected

while unregistering ipvs module, ops_free_list calls
__ip_vs_cleanup, then nf_unregister_net_hooks be called to
do remove nf hook entries. It need a RCU period to finish,
however net->ipvs is set to NULL immediately, which will
trigger NULL pointer dereference when a packet is hooked
and handled by ip_vs_in where net->ipvs is dereferenced.

Another scene is ops_free_list call ops_free to free the
net_generic directly while __ip_vs_cleanup finished, then
calling ip_vs_in will triggers use-after-free.

This patch moves nf_unregister_net_hooks from __ip_vs_cleanup()
to __ip_vs_dev_cleanup(),  where rcu_barrier() is called by
unregister_pernet_device -> unregister_pernet_operations,
that will do the needed grace period.

Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes: efe41606184e ("ipvs: convert to use pernet nf_hook api")
Suggested-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfilter: nft_fib: Fix existence check support

[ Upstream commit e633508a95289489d28faacb68b32c3e7e68ef6f ]

NFTA_FIB_F_PRESENT flag was not always honored since eval functions did
not call nft_fib_store_result in all cases.

Given that in all callsites there is a struct net_device pointer
available which holds the interface data to be stored in destination
register, simplify nft_fib_store_result() to just accept that pointer
instead of the nft_pktinfo pointer and interface index. This also
allows to drop the index to interface lookup previously needed to get
the name associated with given index.

Fixes: 055c4b34b94f6 ("netfilter: nft_fib: Support existence check")
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfilter: nf_queue: fix reinject verdict handling

[ Upstream commit 946c0d8e6ed43dae6527e878d0077c1e11015db0 ]

This patch fixes netfilter hook traversal when there are more than 1 hooks
returning NF_QUEUE verdict. When the first queue reinjects the packet,
'nf_reinject' starts traversing hooks with a proper hook_index. However,
if it again receives a NF_QUEUE verdict (by some other netfilter hook), it
queues the packet with a wrong hook_index. So, when the second queue
reinjects the packet, it re-executes hooks in between.

Fixes: 960632ece694 ("netfilter: convert hook list to an array")
Signed-off-by: Jagdish Motwani <jagdish.motwani@sophos.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf/x86/intel/ds: Fix EVENT vs. UEVENT PEBS constraints

[ Upstream commit 23e3983a466cd540ffdd2bbc6e0c51e31934f941 ]

This patch fixes an bug revealed by the following commit:

  6b89d4c1ae85 ("perf/x86/intel: Fix INTEL_FLAGS_EVENT_CONSTRAINT* masking")

That patch modified INTEL_FLAGS_EVENT_CONSTRAINT() to only look at the event code
when matching a constraint. If code+umask were needed, then the
INTEL_FLAGS_UEVENT_CONSTRAINT() macro was needed instead.
This broke with some of the constraints for PEBS events.

Several of them, including the one used for cycles:p, cycles:pp, cycles:ppp
fell in that category and caused the event to be rejected in PEBS mode.
In other words, on some platforms a cmdline such as:

  $ perf top -e cycles:pp

would fail with -EINVAL.

This patch fixes this bug by properly using INTEL_FLAGS_UEVENT_CONSTRAINT()
when needed in the PEBS constraint tables.

Reported-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Stephane Eranian <eranian@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: kan.liang@intel.com
Link: http://lkml.kernel.org/r/20190521005246.423-1-eranian@google.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfilter: nf_tables: fix oops during rule dump

[ Upstream commit 2c82c7e724ff51cab78e1afd5c2aaa31994fe41e ]

We can oops in nf_tables_fill_rule_info().

Its not possible to fetch previous element in rcu-protected lists
when deletions are not prevented somehow: list_del_rcu poisons
the ->prev pointer value.

Before rcu-conversion this was safe as dump operations did hold
nfnetlink mutex.

Pass previous rule as argument, obtained by keeping a pointer to
the previous rule during traversal.

Fixes: d9adf22a291883 ("netfilter: nf_tables: use call_rcu in netlink dumps")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pinctrl: intel: Clear interrupt status in mask/unmask callback

[ Upstream commit 670784fb4ebe54434e263837390e358405031d9e ]

Commit a939bb57cd47 ("pinctrl: intel: implement gpio_irq_enable") was
added because clearing interrupt status bit is required to avoid
unexpected behavior.

Turns out the unmask callback also needs the fix, which can solve weird
IRQ triggering issues on I2C touchpad ELAN1200.

Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

staging: wilc1000: Fix some double unlock bugs in wilc_wlan_cleanup()

[ Upstream commit fea69916360468e364a4988db25a5afa835f3406 ]

If ->hif_read_reg() or ->hif_write_reg() fail then the code unlocks
and keeps executing.  It should just return.

Fixes: c5c77ba18ea6 ("staging: wilc1000: Add SDIO/SPI 802.11 driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Staging: vc04_services: Fix a couple error codes

[ Upstream commit ca4e4efbefbbdde0a7bb3023ea08d491f4daf9b9 ]

These are accidentally returning positive EINVAL instead of negative
-EINVAL.  Some of the callers treat positive values as success.

Fixes: 7b3ad5abf027 ("staging: Import the BCM2835 MMAL-based V4L2 camera driver.")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>