git.fsl.cs.sunysb.edu Git - wrapfs-4.20.y.git/log

gro_cells: make sure device is up in gro_cells_receive()

[ Upstream commit 2a5ff07a0eb945f291e361aa6f6becca8340ba46 ]

We keep receiving syzbot reports [1] that show that tunnels do not play
the rcu/IFF_UP rules properly.

At device dismantle phase, gro_cells_destroy() will be called
only after a full rcu grace period is observed after IFF_UP
has been cleared.

This means that IFF_UP needs to be tested before queueing packets
into netif_rx() or gro_cells.

This patch implements the test in gro_cells_receive() because
too many callers do not seem to bother enough.

[1]
BUG: unable to handle kernel paging request at fffff4ca0b9ffffe
PGD 0 P4D 0
Oops: 0000 [#1] PREEMPT SMP KASAN
CPU: 0 PID: 21 Comm: kworker/u4:1 Not tainted 5.0.0+ #97
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Workqueue: netns cleanup_net
RIP: 0010:__skb_unlink include/linux/skbuff.h:1929 [inline]
RIP: 0010:__skb_dequeue include/linux/skbuff.h:1945 [inline]
RIP: 0010:__skb_queue_purge include/linux/skbuff.h:2656 [inline]
RIP: 0010:gro_cells_destroy net/core/gro_cells.c:89 [inline]
RIP: 0010:gro_cells_destroy+0x19d/0x360 net/core/gro_cells.c:78
Code: 03 42 80 3c 20 00 0f 85 53 01 00 00 48 8d 7a 08 49 8b 47 08 49 c7 07 00 00 00 00 48 89 f9 49 c7 47 08 00 00 00 00 48 c1 e9 03 <42> 80 3c 21 00 0f 85 10 01 00 00 48 89 c1 48 89 42 08 48 c1 e9 03
RSP: 0018:ffff8880aa3f79a8 EFLAGS: 00010a02
RAX: 00ffffffffffffe8 RBX: ffffe8ffffc64b70 RCX: 1ffff8ca0b9ffffe
RDX: ffffc6505cffffe8 RSI: ffffffff858410ca RDI: ffffc6505cfffff0
RBP: ffff8880aa3f7a08 R08: ffff8880aa3e8580 R09: fffffbfff1263645
R10: fffffbfff1263644 R11: ffffffff8931b223 R12: dffffc0000000000
R13: 0000000000000000 R14: ffffe8ffffc64b80 R15: ffffe8ffffc64b75
kobject: 'loop2' (000000004bd7d84a): kobject_uevent_env
FS:  0000000000000000(0000) GS:ffff8880ae800000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: fffff4ca0b9ffffe CR3: 0000000094941000 CR4: 00000000001406f0
Call Trace:
kobject: 'loop2' (000000004bd7d84a): fill_kobj_path: path = '/devices/virtual/block/loop2'
ip_tunnel_dev_free+0x19/0x60 net/ipv4/ip_tunnel.c:1010
netdev_run_todo+0x51c/0x7d0 net/core/dev.c:8970
rtnl_unlock+0xe/0x10 net/core/rtnetlink.c:116
ip_tunnel_delete_nets+0x423/0x5f0 net/ipv4/ip_tunnel.c:1124
vti_exit_batch_net+0x23/0x30 net/ipv4/ip_vti.c:495
ops_exit_list.isra.0+0x105/0x160 net/core/net_namespace.c:156
cleanup_net+0x3fb/0x960 net/core/net_namespace.c:551
process_one_work+0x98e/0x1790 kernel/workqueue.c:2173
worker_thread+0x98/0xe40 kernel/workqueue.c:2319
kthread+0x357/0x430 kernel/kthread.c:246
ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:352
Modules linked in:
CR2: fffff4ca0b9ffffe
   [ end trace 513fc9c1338d1cb3 ]
RIP: 0010:__skb_unlink include/linux/skbuff.h:1929 [inline]
RIP: 0010:__skb_dequeue include/linux/skbuff.h:1945 [inline]
RIP: 0010:__skb_queue_purge include/linux/skbuff.h:2656 [inline]
RIP: 0010:gro_cells_destroy net/core/gro_cells.c:89 [inline]
RIP: 0010:gro_cells_destroy+0x19d/0x360 net/core/gro_cells.c:78
Code: 03 42 80 3c 20 00 0f 85 53 01 00 00 48 8d 7a 08 49 8b 47 08 49 c7 07 00 00 00 00 48 89 f9 49 c7 47 08 00 00 00 00 48 c1 e9 03 <42> 80 3c 21 00 0f 85 10 01 00 00 48 89 c1 48 89 42 08 48 c1 e9 03
RSP: 0018:ffff8880aa3f79a8 EFLAGS: 00010a02
RAX: 00ffffffffffffe8 RBX: ffffe8ffffc64b70 RCX: 1ffff8ca0b9ffffe
RDX: ffffc6505cffffe8 RSI: ffffffff858410ca RDI: ffffc6505cfffff0
RBP: ffff8880aa3f7a08 R08: ffff8880aa3e8580 R09: fffffbfff1263645
R10: fffffbfff1263644 R11: ffffffff8931b223 R12: dffffc0000000000
kobject: 'loop3' (00000000e4ee57a6): kobject_uevent_env
R13: 0000000000000000 R14: ffffe8ffffc64b80 R15: ffffe8ffffc64b75
FS:  0000000000000000(0000) GS:ffff8880ae800000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: fffff4ca0b9ffffe CR3: 0000000094941000 CR4: 00000000001406f0

Fixes: c9e6bc644e55 ("net: add gro_cells infrastructure")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

connector: fix unsafe usage of ->real_parent

[ Upstream commit 6d2b0f02f5a07a4bf02e4cbc90d7eaa85cac2986 ]

proc_exit_connector() uses ->real_parent lockless. This is not
safe that its parent can go away at any moment, so use RCU to
protect it, and ensure that this task is not released.

[  747.624551] ==================================================================
[  747.632946] BUG: KASAN: use-after-free in proc_exit_connector+0x1f7/0x310
[  747.640686] Read of size 4 at addr ffff88a0276988e0 by task sshd/2882
[  747.648032]
[  747.649804] CPU: 11 PID: 2882 Comm: sshd Tainted: G            E     4.19.26-rc2 #11
[  747.658629] Hardware name: IBM x3550M4 -[7914OFV]-/00AM544, BIOS -[D7E142BUS-1.71]- 07/31/2014
[  747.668419] Call Trace:
[  747.671269]  dump_stack+0xf0/0x19b
[  747.675186]  ? show_regs_print_info+0x5/0x5
[  747.679988]  ? kmsg_dump_rewind_nolock+0x59/0x59
[  747.685302]  print_address_description+0x6a/0x270
[  747.691162]  kasan_report+0x258/0x380
[  747.695835]  ? proc_exit_connector+0x1f7/0x310
[  747.701402]  proc_exit_connector+0x1f7/0x310
[  747.706767]  ? proc_coredump_connector+0x2d0/0x2d0
[  747.712715]  ? _raw_write_unlock_irq+0x29/0x50
[  747.718270]  ? _raw_write_unlock_irq+0x29/0x50
[  747.723820]  ? ___preempt_schedule+0x16/0x18
[  747.729193]  ? ___preempt_schedule+0x16/0x18
[  747.734574]  do_exit+0xa11/0x14f0
[  747.738880]  ? mm_update_next_owner+0x590/0x590
[  747.744525]  ? debug_show_all_locks+0x3c0/0x3c0
[  747.761448]  ? ktime_get_coarse_real_ts64+0xeb/0x1c0
[  747.767589]  ? lockdep_hardirqs_on+0x1a6/0x290
[  747.773154]  ? check_chain_key+0x139/0x1f0
[  747.778345]  ? check_flags.part.35+0x240/0x240
[  747.783908]  ? __lock_acquire+0x2300/0x2300
[  747.789171]  ? _raw_spin_unlock_irqrestore+0x59/0x70
[  747.795316]  ? _raw_spin_unlock_irqrestore+0x59/0x70
[  747.801457]  ? do_raw_spin_unlock+0x10f/0x1e0
[  747.806914]  ? do_raw_spin_trylock+0x120/0x120
[  747.812481]  ? preempt_count_sub+0x14/0xc0
[  747.817645]  ? _raw_spin_unlock+0x2e/0x50
[  747.822708]  ? __handle_mm_fault+0x12db/0x1fa0
[  747.828367]  ? __pmd_alloc+0x2d0/0x2d0
[  747.833143]  ? check_noncircular+0x50/0x50
[  747.838309]  ? match_held_lock+0x7f/0x340
[  747.843380]  ? check_noncircular+0x50/0x50
[  747.848561]  ? handle_mm_fault+0x21a/0x5f0
[  747.853730]  ? check_flags.part.35+0x240/0x240
[  747.859290]  ? check_chain_key+0x139/0x1f0
[  747.864474]  ? __do_page_fault+0x40f/0x760
[  747.869655]  ? __audit_syscall_entry+0x4b/0x1f0
[  747.875319]  ? syscall_trace_enter+0x1d5/0x7b0
[  747.880877]  ? trace_raw_output_preemptirq_template+0x90/0x90
[  747.887895]  ? trace_raw_output_sys_exit+0x80/0x80
[  747.893860]  ? up_read+0x3b/0x90
[  747.898142]  ? stop_critical_timings+0x260/0x260
[  747.903909]  do_group_exit+0xe0/0x1c0
[  747.908591]  ? __x64_sys_exit+0x30/0x30
[  747.913460]  ? trace_raw_output_preemptirq_template+0x90/0x90
[  747.920485]  ? tracer_hardirqs_on+0x270/0x270
[  747.925956]  __x64_sys_exit_group+0x28/0x30
[  747.931214]  do_syscall_64+0x117/0x400
[  747.935988]  ? syscall_return_slowpath+0x2f0/0x2f0
[  747.941931]  ? trace_hardirqs_off_thunk+0x1a/0x1c
[  747.947788]  ? trace_hardirqs_on_caller+0x1d0/0x1d0
[  747.953838]  ? lockdep_sys_exit+0x16/0x8e
[  747.958915]  ? trace_hardirqs_off_thunk+0x1a/0x1c
[  747.964784]  entry_SYSCALL_64_after_hwframe+0x49/0xbe
[  747.971021] RIP: 0033:0x7f572f154c68
[  747.975606] Code: Bad RIP value.
[  747.979791] RSP: 002b:00007ffed2dfaa58 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7
[  747.989324] RAX: ffffffffffffffda RBX: 00007f572f431840 RCX: 00007f572f154c68
[  747.997910] RDX: 0000000000000001 RSI: 000000000000003c RDI: 0000000000000001
[  748.006495] RBP: 0000000000000001 R08: 00000000000000e7 R09: fffffffffffffee0
[  748.015079] R10: 00007f572f4387e8 R11: 0000000000000246 R12: 00007f572f431840
[  748.023664] R13: 000055a7f90f2c50 R14: 000055a7f96e2310 R15: 000055a7f96e2310
[  748.032287]
[  748.034509] Allocated by task 2300:
[  748.038982]  kasan_kmalloc+0xa0/0xd0
[  748.043562]  kmem_cache_alloc_node+0xf5/0x2e0
[  748.049018]  copy_process+0x1781/0x4790
[  748.053884]  _do_fork+0x166/0x9a0
[  748.058163]  do_syscall_64+0x117/0x400
[  748.062943]  entry_SYSCALL_64_after_hwframe+0x49/0xbe
[  748.069180]
[  748.071405] Freed by task 15395:
[  748.075591]  __kasan_slab_free+0x130/0x180
[  748.080752]  kmem_cache_free+0xc2/0x310
[  748.085619]  free_task+0xea/0x130
[  748.089901]  __put_task_struct+0x177/0x230
[  748.095063]  finish_task_switch+0x51b/0x5d0
[  748.100315]  __schedule+0x506/0xfa0
[  748.104791]  schedule+0xca/0x260
[  748.108978]  futex_wait_queue_me+0x27e/0x420
[  748.114333]  futex_wait+0x251/0x550
[  748.118814]  do_futex+0x75b/0xf80
[  748.123097]  __x64_sys_futex+0x231/0x2a0
[  748.128065]  do_syscall_64+0x117/0x400
[  748.132835]  entry_SYSCALL_64_after_hwframe+0x49/0xbe
[  748.139066]
[  748.141289] The buggy address belongs to the object at ffff88a027698000
[  748.141289]  which belongs to the cache task_struct of size 12160
[  748.156589] The buggy address is located 2272 bytes inside of
[  748.156589]  12160-byte region [ffff88a027698000, ffff88a02769af80)
[  748.171114] The buggy address belongs to the page:
[  748.177055] page:ffffea00809da600 count:1 mapcount:0 mapping:ffff888107d01e00 index:0x0 compound_mapcount: 0
[  748.189136] flags: 0x57ffffc0008100(slab|head)
[  748.194688] raw: 0057ffffc0008100 ffffea00809a3200 0000000300000003 ffff888107d01e00
[  748.204424] raw: 0000000000000000 0000000000020002 00000001ffffffff 0000000000000000
[  748.214146] page dumped because: kasan: bad access detected
[  748.220976]
[  748.223197] Memory state around the buggy address:
[  748.229128]  ffff88a027698780: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[  748.238271]  ffff88a027698800: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[  748.247414] >ffff88a027698880: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[  748.256564]                                                        ^
[  748.264267]  ffff88a027698900: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[  748.273493]  ffff88a027698980: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[  748.282630] ==================================================================

Fixes: b086ff87251b4a4 ("connector: add parent pid and tgid to coredump and exit events")
Signed-off-by: Zhang Yu <zhangyu31@baidu.com>
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 4.20.16

perf/x86/intel: Implement support for TSX Force Abort

commit 400816f60c543153656ac74eaf7f36f6b7202378 upstream

Skylake (and later) will receive a microcode update to address a TSX
errata. This microcode will, on execution of a TSX instruction
(speculative or not) use (clobber) PMC3. This update will also provide
a new MSR to change this behaviour along with a CPUID bit to enumerate
the presence of this new MSR.

When the MSR gets set; the microcode will no longer use PMC3 but will
Force Abort every TSX transaction (upon executing COMMIT).

When TSX Force Abort (TFA) is allowed (default); the MSR gets set when
PMC3 gets scheduled and cleared when, after scheduling, PMC3 is
unused.

When TFA is not allowed; clear PMC3 from all constraints such that it
will not get used.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86: Add TSX Force Abort CPUID/MSR

commit 52f64909409c17adf54fcf5f9751e0544ca3a6b4 upstream

Skylake systems will receive a microcode update to address a TSX
errata. This microcode will (by default) clobber PMC3 when TSX
instructions are (speculatively or not) executed.

It also provides an MSR to cause all TSX transaction to abort and
preserve PMC3.

Add the CPUID enumeration and MSR definition.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf/x86/intel: Generalize dynamic constraint creation

commit 11f8b2d65ca9029591c8df26bb6bd063c312b7fe upstream

Such that we can re-use it.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf/x86/intel: Make cpuc allocations consistent

commit d01b1f96a82e5dd7841a1d39db3abfdaf95f70ab upstream

The cpuc data structure allocation is different between fake and real
cpuc's; use the same code to init/free both.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ath9k: Avoid OF no-EEPROM quirks without qca,no-eeprom

commit ce938231bd3b1d7af3cbd8836f084801090470e1 upstream.

ath9k_of_init() function[0] was initially written on the assumption that
if someone had an explicit ath9k OF node that "there must be something
wrong, why would someone add an OF node if everything is fine"[1]
(Quoting Martin Blumenstingl <martin.blumenstingl@googlemail.com>)

"it turns out it's not that simple. with your requirements I'm now aware
of two use-cases where the current code in ath9k_of_init() doesn't work
without modifications"[1]

The "your requirements" Martin speaks of is the result of the fact that I
have a device (PowerCloud Systems CR5000) has some kind of default - not
unique mac address - set and requires to set the correct MAC address via
mac-address devicetree property, however:

"some cards come with a physical EEPROM chip [or OTP] so "qca,no-eeprom"
should not be set (your use-case). in this case AH_USE_EEPROM should be
set (which is the default when there is no OF node)"[1]

The other use case is:

the firmware on some PowerMac G5 seems to add a OF node for the ath9k
card automatically. depending on the EEPROM on the card AH_NO_EEP_SWAP
should be unset (which is the default when there is no OF node). see [3]

After this patch to ath9k_of_init() the new behavior will be:

    if there's no OF node then everything is the same as before
    if there's an empty OF node then ath9k will use the hardware EEPROM
      (before ath9k would fail to initialize because no EEPROM data was
      provided by userspace)
    if there's an OF node with only a MAC address then ath9k will use
      the MAC address and the hardware EEPROM (see the case above)
    with "qca,no-eeprom" EEPROM data from userspace will be requested.
      the behavior here will not change
[1]

Martin provides additional background on EEPROM swapping[1].

Thanks to Christian Lamparter <chunkeey@gmail.com> for all his help on
troubleshooting this issue and the basis for this patch.

[0]https://elixir.bootlin.com/linux/v4.20-rc7/source/drivers/net/wireless/ath/ath9k/init.c#L615
[1]https://github.com/openwrt/openwrt/pull/1645#issuecomment-448027058
[2]https://github.com/openwrt/openwrt/pull/1613
[3]https://patchwork.kernel.org/patch/10241731/

Fixes: 138b41253d9c ("ath9k: parse the device configuration from an OF node")
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Daniel F. Dickinson <cshored@thecshore.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Cc: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: erofs: keep corrupted fs from crashing kernel in erofs_namei()

commit 419d6efc50e94bcf5d6b35cd8c71f79edadec564 upstream.

As Al pointed out, "
... and while we are at it, what happens to
unsigned int nameoff = le16_to_cpu(de[mid].nameoff);
unsigned int matched = min(startprfx, endprfx);

struct qstr dname = QSTR_INIT(data + nameoff,
unlikely(mid >= ndirents - 1) ?
maxsize - nameoff :
le16_to_cpu(de[mid + 1].nameoff) - nameoff);

/* string comparison without already matched prefix */
int ret = dirnamecmp(name, &dname, &matched);
if le16_to_cpu(de[...].nameoff) is not monotonically increasing? I.e.
what's to prevent e.g. (unsigned)-1 ending up in dname.len?

Corrupted fs image shouldn't oops the kernel.. "

Revisit the related lookup flow to address the issue.

Fixes: d72d1ce60174 ("staging: erofs: add namei functions")
Cc: <stable@vger.kernel.org> # 4.19+
Suggested-by: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

gfs2: Fix missed wakeups in find_insert_glock

commit 605b0487f0bc1ae9963bf52ece0f5c8055186f81 upstream.

Mark Syms has reported seeing tasks that are stuck waiting in
find_insert_glock. It turns out that struct lm_lockname contains four padding
bytes on 64-bit architectures that function glock_waitqueue doesn't skip when
hashing the glock name. As a result, we can end up waking up the wrong
waitqueue, and the waiting tasks may be stuck forever.

Fix that by using ht_parms.key_len instead of sizeof(struct lm_lockname) for
the key length.

Reported-by: Mark Syms <mark.syms@citrix.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bpf: Stop the psock parser before canceling its work

commit e8e3437762ad938880dd48a3c52d702e7cf3c124 upstream.

We might have never enabled (started) the psock's parser, in which case it
will not get stopped when destroying the psock. This leads to a warning
when trying to cancel parser's work from psock's deferred destructor:

[  405.325769] WARNING: CPU: 1 PID: 3216 at net/strparser/strparser.c:526 strp_done+0x3c/0x40
[  405.326712] Modules linked in: [last unloaded: test_bpf]
[  405.327359] CPU: 1 PID: 3216 Comm: kworker/1:164 Tainted: G        W         5.0.0 #42
[  405.328294] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20180531_142017-buildhw-08.phx2.fedoraproject.org-1.fc28 04/01/2014
[  405.329712] Workqueue: events sk_psock_destroy_deferred
[  405.330254] RIP: 0010:strp_done+0x3c/0x40
[  405.330706] Code: 28 e8 b8 d5 6b ff 48 8d bb 80 00 00 00 e8 9c d5 6b ff 48 8b 7b 18 48 85 ff 74 0d e8 1e a5 e8 ff 48 c7 43 18 00 00 00 00 5b c3 <0f> 0b eb cf 66 66 66 66 90 55 89 f5 53 48 89 fb 48 83 c7 28 e8 0b
[  405.332862] RSP: 0018:ffffc900026bbe50 EFLAGS: 00010246
[  405.333482] RAX: ffffffff819323e0 RBX: ffff88812cb83640 RCX: ffff88812cb829e8
[  405.334228] RDX: 0000000000000001 RSI: ffff88812cb837e8 RDI: ffff88812cb83640
[  405.335366] RBP: ffff88813fd22680 R08: 0000000000000000 R09: 000073746e657665
[  405.336472] R10: 8080808080808080 R11: 0000000000000001 R12: ffff88812cb83600
[  405.337760] R13: 0000000000000000 R14: ffff88811f401780 R15: ffff88812cb837e8
[  405.338777] FS:  0000000000000000(0000) GS:ffff88813fd00000(0000) knlGS:0000000000000000
[  405.339903] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  405.340821] CR2: 00007fb11489a6b8 CR3: 000000012d4d6000 CR4: 00000000000406e0
[  405.341981] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  405.343131] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[  405.344415] Call Trace:
[  405.344821]  sk_psock_destroy_deferred+0x23/0x1b0
[  405.345585]  process_one_work+0x1ae/0x3e0
[  405.346110]  worker_thread+0x3c/0x3b0
[  405.346576]  ? pwq_unbound_release_workfn+0xd0/0xd0
[  405.347187]  kthread+0x11d/0x140
[  405.347601]  ? __kthread_parkme+0x80/0x80
[  405.348108]  ret_from_fork+0x35/0x40
[  405.348566] ---[ end trace a4a3af4026a327d4 ]---

Stop psock's parser just before canceling its work.

Fixes: 1d79895aef18 ("sk_msg: Always cancel strp work before freeing the psock")
Reported-by: kernel test robot <rong.a.chen@intel.com>
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sk_msg: Always cancel strp work before freeing the psock

commit 1d79895aef18fa05789995d86d523c9b2ee58a02 upstream.

Despite having stopped the parser, we still need to deinitialize it
by calling strp_done so that it cancels its work. Otherwise the worker
thread can run after we have freed the parser, and attempt to access
its workqueue resulting in a use-after-free:

==================================================================
BUG: KASAN: use-after-free in pwq_activate_delayed_work+0x1b/0x1d0
Read of size 8 at addr ffff888069975240 by task kworker/u2:2/93

CPU: 0 PID: 93 Comm: kworker/u2:2 Not tainted 5.0.0-rc2-00335-g28f9d1a3d4fe-dirty #14
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-2.fc27 04/01/2014
Workqueue: (null) (kstrp)
Call Trace:
print_address_description+0x6e/0x2b0
? pwq_activate_delayed_work+0x1b/0x1d0
kasan_report+0xfd/0x177
? pwq_activate_delayed_work+0x1b/0x1d0
? pwq_activate_delayed_work+0x1b/0x1d0
pwq_activate_delayed_work+0x1b/0x1d0
? process_one_work+0x4aa/0x660
pwq_dec_nr_in_flight+0x9b/0x100
worker_thread+0x82/0x680
? process_one_work+0x660/0x660
kthread+0x1b9/0x1e0
? __kthread_create_on_node+0x250/0x250
ret_from_fork+0x1f/0x30

Allocated by task 111:
sk_psock_init+0x3c/0x1b0
sock_map_link.isra.2+0x103/0x4b0
sock_map_update_common+0x94/0x270
sock_map_update_elem+0x145/0x160
__se_sys_bpf+0x152e/0x1e10
do_syscall_64+0xb2/0x3e0
entry_SYSCALL_64_after_hwframe+0x44/0xa9

Freed by task 112:
kfree+0x7f/0x140
process_one_work+0x40b/0x660
worker_thread+0x82/0x680
kthread+0x1b9/0x1e0
ret_from_fork+0x1f/0x30

The buggy address belongs to the object at ffff888069975180
which belongs to the cache kmalloc-512 of size 512
The buggy address is located 192 bytes inside of
512-byte region [ffff888069975180, ffff888069975380)
The buggy address belongs to the page:
page:ffffea0001a65d00 count:1 mapcount:0 mapping:ffff88806d401280 index:0x0 compound_mapcount: 0
flags: 0x4000000000010200(slab|head)
raw: 4000000000010200 dead000000000100 dead000000000200 ffff88806d401280
raw: 0000000000000000 00000000800c000c 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
ffff888069975100: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff888069975180: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
>ffff888069975200: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff888069975280: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff888069975300: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
==================================================================

Reported-by: Marek Majkowski <marek@cloudflare.com>
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/netdev/CAJPywTLwgXNEZ2dZVoa=udiZmtrWJ0q5SuBW64aYs0Y1khXX3A@mail.gmail.com
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "PCI/PME: Implement runtime PM callbacks"

commit c528f7bd362b097eeeafa6fbbeccd9750b79c7ba upstream.

This reverts commit 0e157e52860441cb26051f131dd0b5ae3187a07b.

Heiner reported that the commit in question prevents his network adapter
from triggering PME and waking up when network cable is plugged.

The commit tried to prevent root port waking up from D3cold immediately but
looks like disabing root port PME interrupt is not the right way to fix
that issue so revert it now. The patch following proposes an alternative
solution to that issue.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=202103
Fixes: 0e157e528604 ("PCI/PME: Implement runtime PM callbacks")
Reported-by: Heiner Kallweit <hkallweit1@gmail.com>
Tested-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
CC: stable@vger.kernel.org # v4.20+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: Revert "media: rc: some events are dropped by userspace"

commit 05f0edadcc5fccdfc0676825b3e70e75dc0a8a84 upstream.

When an rc device is created, we do not know what key codes it will
support, since a new keymap might be loaded at some later point. So,
we set all keybit in the input device.

The uevent for the input device includes all the key codes, of which
there are now 768. This overflows the size of the uevent
(UEVENT_BUFFER_SIZE) and no event is generated.

Revert for now until we figure out a different solution.

This reverts commit fec225a04330d0f222d24feb5bea045526031675.

Cc: <stable@vger.kernel.org> # 4.20+
Reported-by: Christian Holpert <christian@holpert.de>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm: disable uncached DMA optimization for ARM and arm64

[ Upstream commit e02f5c1bb2283cfcee68f2f0feddcc06150f13aa ]

The DRM driver stack is designed to work with cache coherent devices
only, but permits an optimization to be enabled in some cases, where
for some buffers, both the CPU and the GPU use uncached mappings,
removing the need for DMA snooping and allocation in the CPU caches.

The use of uncached GPU mappings relies on the correct implementation
of the PCIe NoSnoop TLP attribute by the platform, otherwise the GPU
will use cached mappings nonetheless. On x86 platforms, this does not
seem to matter, as uncached CPU mappings will snoop the caches in any
case. However, on ARM and arm64, enabling this optimization on a
platform where NoSnoop is ignored results in loss of coherency, which
breaks correct operation of the device. Since we have no way of
detecting whether NoSnoop works or not, just disable this
optimization entirely for ARM and arm64.

Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: David Zhou <David1.Zhou@amd.com>
Cc: Huang Rui <ray.huang@amd.com>
Cc: Junwei Zhang <Jerry.Zhang@amd.com>
Cc: Michel Daenzer <michel.daenzer@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Sean Paul <sean@poorly.run>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: amd-gfx list <amd-gfx@lists.freedesktop.org>
Cc: dri-devel <dri-devel@lists.freedesktop.org>
Reported-by: Carsten Haitzler <Carsten.Haitzler@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.kernel.org/patch/10778815/
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: exynos: Fix max voltage for buck8 regulator on Odroid XU3/XU4

commit a3238924a820c1d7c977b632b769f3b5690cba09 upstream.

The maximum voltage value for buck8 regulator on Odroid XU3/XU4 boards is
set too low. Increase it to the 2000mV as specified on the board schematic.
So far the board worked fine, because of the bug in the PMIC driver, which
used incorrect step value for that regulator. It interpreted the voltage
value set by the bootloader as 1225mV and kept it unchanged. The regulator
driver has been however fixed recently in the commit 56b5d4ea778c
("regulator: s2mps11: Fix steps for buck7, buck8 and LDO35"), what results
in reading the proper buck8 value and forcing it to 1500mV on boot. This
is not enough for proper board operation and results in eMMC errors during
heavy IO traffic. Increasing maximum voltage value for buck8 restores
original driver behavior and fixes eMMC issues.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Fixes: 86a2d2ac5e5d ("ARM: dts: Add dts file for Odroid XU3 board")
Fixes: 56b5d4ea778c ("regulator: s2mps11: Fix steps for buck7, buck8 and LDO35")
Cc: <stable@vger.kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: dts: exynos: Add minimal clkout parameters to Exynos3250 PMU

commit a66352e005488ecb4b534ba1af58a9f671eba9b8 upstream.

Add minimal parameters needed by the Exynos CLKOUT driver to Exynos3250
PMU node. This fixes the following warning on boot:

exynos_clkout_init: failed to register clkout clock

Fixes: d19bb397e19e ("ARM: dts: exynos: Update PMU node with CLKOUT related data")
Cc: <stable@vger.kernel.org>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: dts: exynos: Fix pinctrl definition for eMMC RTSN line on Odroid X2/U3

commit ec33745bccc8f336957c751f4153421cc9ef5a54 upstream.

Commit 225da7e65a03 ("ARM: dts: add eMMC reset line for
exynos4412-odroid-common") added MMC power sequence for eMMC card of
Odroid X2/U3. It reused generic sd1_cd pin control configuration node
and only disabled pull-up. However that time the pinctrl configuration
was not applied during MMC power sequence driver initialization. This
has been changed later by commit d97a1e5d7cd2 ("mmc: pwrseq: convert to
proper platform device").

It turned out then, that the provided pinctrl configuration is not
correct, because the eMMC_RTSN line is being re-configured as 'special
function/card detect function for mmc1 controller' not the simple
'output', thus the power sequence driver doesn't really set the pin
value. This in effect broke the reboot of Odroid X2/U3 boards. Fix this
by providing separate node with eMMC_RTSN pin configuration.

Cc: <stable@vger.kernel.org>
Reported-by: Markus Reichl <m.reichl@fivetechno.de>
Suggested-by: Ulf Hansson <ulf.hansson@linaro.org>
Fixes: 225da7e65a03 ("ARM: dts: add eMMC reset line for exynos4412-odroid-common")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: dts: hikey: Revert "Enable HS200 mode on eMMC"

commit 8d26c1390aec795d492b8de5e4437751e8805a1d upstream.

This reverts commit abd7d0972a192ee653efc7b151a6af69db58f2bb. This
change was already partially reverted by John Stultz in
commit 9c6d26df1fae ("arm64: dts: hikey: Fix eMMC corruption regression").

This change appears to cause controller resets and block read failures
which prevents successful booting on some hikey boards.

Cc: Ryan Grachek <ryan@edited.us>
Cc: Wei Xu <xuwei5@hisilicon.com>
Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: devicetree@vger.kernel.org
Cc: stable <stable@vger.kernel.org> #4.17+
Signed-off-by: Alistair Strachan <astrachan@google.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: dts: hikey: Give wifi some time after power-on

commit 83b944174ad79825ae84a47af1a0354485b24602 upstream.

Somewhere along recent changes to power control of the wl1835, power-on
became very unreliable on the hikey, failing like this:

wl1271_sdio: probe of mmc2:0001:1 failed with error -16
wl1271_sdio: probe of mmc2:0001:2 failed with error -16

After playing with some dt parameters and comparing to other users of
this chip, it turned out we need some power-on delay to make things
stable again. In contrast to those other users which define 200 ms, the
hikey would already be happy with 1 ms. Still, we use the safer 10 ms,
like on the Ultra96.

Fixes: ea452678734e ("arm64: dts: hikey: Fix WiFi support")
Cc: <stable@vger.kernel.org> #4.12+
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: dts: zcu100-revC: Give wifi some time after power-on

commit 35a4f89cd4731ac6ec985cd29ddc1630903006b7 upstream.

Somewhere along recent changes to power control of the wl1831, power-on
became very unreliable on the Ultra96, failing like this:

wl1271_sdio: probe of mmc2:0001:1 failed with error -16
wl1271_sdio: probe of mmc2:0001:2 failed with error -16

After playing with some dt parameters and comparing to other users of
this chip, it turned out we need some power-on delay to make things
stable again. In contrast to those other users which define 200 ms,
Ultra96 is already happy with 10 ms.

Fixes: 5869ba0653b9 ("arm64: zynqmp: Add support for Xilinx zcu100-revC")
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/PCI: Fixup RTIT_BAR of Intel Denverton Trace Hub

commit 2e095ce7b6ecce2f3e2ff330527f12056ed1e1a1 upstream.

On Denverton's integration of the Intel(R) Trace Hub (for a reference and
overview see Documentation/trace/intel_th.rst) the reported size of one of
its resources (RTIT_BAR) doesn't match its actual size, which leads to
overlaps with other devices' resources.

In practice, it overlaps with XHCI MMIO space, which results in the xhci
driver bailing out after seeing its registers as 0xffffffff, and perceived
disappearance of all USB devices:

  intel_th_pci 0000:00:1f.7: enabling device (0004 -> 0006)
  xhci_hcd 0000:00:15.0: xHCI host controller not responding, assume dead
  xhci_hcd 0000:00:15.0: xHC not responding in xhci_irq, assume controller is dead
  xhci_hcd 0000:00:15.0: HC died; cleaning up
  usb 1-1: USB disconnect, device number 2

For this reason, we need to resize the RTIT_BAR on Denverton to its actual
size, which in this case is 4MB.  The corresponding erratum is DNV36 at the
link below:

  DNV36.       Processor Host Root Complex May Incorrectly Route Memory
               Accesses to Intel® Trace Hub

  Problem:     The Intel® Trace Hub RTIT_BAR (B0:D31:F7 offset 20h) is
       reported as a 2KB memory range.  Due to this erratum, the
       processor Host Root Complex will forward addresses from
       RTIT_BAR to RTIT_BAR + 4MB -1 to Intel® Trace Hub.

  Implication: Devices assigned within the RTIT_BAR to RTIT_BAR + 4MB -1
               space may not function correctly.

  Workaround:  A BIOS code change has been identified and may be
               implemented as a workaround for this erratum.

  Status:      No Fix.

Note that 5118ccd34780 ("intel_th: pci: Add Denverton SOC support") updates
the Trace Hub driver so it claims the Denverton device, but the resource
overlap exists regardless of whether that driver is loaded or that commit
is included.

Link: https://www.intel.com/content/dam/www/public/us/en/documents/specification-updates/atom-c3000-family-spec-update.pdf
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
[bhelgaas: include erratum text, clarify relationship with 5118ccd34780]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: aacraid: Fix missing break in switch statement

commit 5e420fe635813e5746b296cfc8fff4853ae205a2 upstream.

Add missing break statement and fix identation issue.

This bug was found thanks to the ongoing efforts to enable
-Wimplicit-fallthrough.

Fixes: 9cb62fa24e0d ("aacraid: Log firmware AIF messages")
Cc: stable@vger.kernel.org
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iscsi_ibft: Fix missing break in switch statement

commit df997abeebadaa4824271009e2d2b526a70a11cb upstream.

Add missing break statement in order to prevent the code from falling
through to case ISCSI_BOOT_TGT_NAME, which is unnecessary.

This bug was found thanks to the ongoing efforts to enable
-Wimplicit-fallthrough.

Fixes: b33a84a38477 ("ibft: convert iscsi_ibft module to iscsi boot lib")
Cc: stable@vger.kernel.org
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Input: elan_i2c - add id for touchpad found in Lenovo s21e-20

commit e154ab69321ce2c54f19863d75c77b4e2dc9d365 upstream.

Lenovo s21e-20 uses ELAN0601 in its ACPI tables for the Elan touchpad.

Signed-off-by: Vincent Batts <vbatts@hashbangbash.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Input: wacom_serial4 - add support for Wacom ArtPad II tablet

commit 44fc95e218a09d7966a9d448941fdb003f6bb69f upstream.

Tablet initially begins communicating at 9600 baud, so this command
should be used to connect to the device:

$ inputattach --daemon --baud 9600 --wacom_iv /dev/ttyS0

https://github.com/linuxwacom/xf86-input-wacom/issues/40

Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netfilter: nft_compat: don't use refcount_inc on newly allocated entry

[ Upstream commit 947e492c0fc2132ae5fca081a9c2952ccaab0404 ]

When I moved the refcount to refcount_t type I missed the fact that
refcount_inc() will result in use-after-free warning with
CONFIG_REFCOUNT_FULL=y builds.

The correct fix would be to init the reference count to 1 at allocation
time, but, unfortunately we cannot do this, as we can't undo that
in case something else fails later in the batch.

So only solution I see is to special-case the 'new entry' condition
and replace refcount_inc() with a "delayed" refcount_set(1) in this case,
as done here.

The .activate callback can be removed to simplify things, we only
need to make sure that deactivate() decrements/unlinks the entry
from the list at end of transaction phase (commit or abort).

Fixes: 12c44aba6618 ("netfilter: nft_compat: use refcnt_t type for nft_xt reference count")
Reported-by: Jordan Glover <Golden_Miller83@protonmail.ch>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfilter: nf_tables: unbind set in rule from commit path

[ Upstream commit f6ac8585897684374a19863fff21186a05805286 ]

Anonymous sets that are bound to rules from the same transaction trigger
a kernel splat from the abort path due to double set list removal and
double free.

This patch updates the logic to search for the transaction that is
responsible for creating the set and disable the set list removal and
release, given the rule is now responsible for this. Lookup is reverse
since the transaction that adds the set is likely to be at the tail of
the list.

Moreover, this patch adds the unbind step to deliver the event from the
commit path. This should not be done from the worker thread, since we
have no guarantees of in-order delivery to the listener.

This patch removes the assumption that both activate and deactivate
callbacks need to be provided.

Fixes: cd5125d8f518 ("netfilter: nf_tables: split set destruction in deactivate and destroy phase")
Reported-by: Mikhail Morfikov <mmorfikov@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nvme-pci: add missing unlock for reset error

[ Upstream commit 4726bcf30fad37cc555cd9dcd6c73f2b2668c879 ]

The reset work holds a mutex to prevent races with removal modifying the
same resources, but was unlocking only on success. Unlock on failure
too.

Fixes: 5c959d73dba64 ("nvme-pci: fix rapid add remove sequence")
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

blk-iolatency: fix IO hang due to negative inflight counter

[ Upstream commit 8c772a9bfc7c07c76f4a58b58910452fbb20843b ]

Our test reported the following stack, and vmcore showed that
->inflight counter is -1.

[ffffc9003fcc38d0] __schedule at ffffffff8173d95d
[ffffc9003fcc3958] schedule at ffffffff8173de26
[ffffc9003fcc3970] io_schedule at ffffffff810bb6b6
[ffffc9003fcc3988] blkcg_iolatency_throttle at ffffffff813911cb
[ffffc9003fcc3a20] rq_qos_throttle at ffffffff813847f3
[ffffc9003fcc3a48] blk_mq_make_request at ffffffff8137468a
[ffffc9003fcc3b08] generic_make_request at ffffffff81368b49
[ffffc9003fcc3b68] submit_bio at ffffffff81368d7d
[ffffc9003fcc3bb8] ext4_io_submit at ffffffffa031be00 [ext4]
[ffffc9003fcc3c00] ext4_writepages at ffffffffa03163de [ext4]
[ffffc9003fcc3d68] do_writepages at ffffffff811c49ae
[ffffc9003fcc3d78] __filemap_fdatawrite_range at ffffffff811b6188
[ffffc9003fcc3e30] filemap_write_and_wait_range at ffffffff811b6301
[ffffc9003fcc3e60] ext4_sync_file at ffffffffa030cee8 [ext4]
[ffffc9003fcc3ea8] vfs_fsync_range at ffffffff8128594b
[ffffc9003fcc3ee8] do_fsync at ffffffff81285abd
[ffffc9003fcc3f18] sys_fsync at ffffffff81285d50
[ffffc9003fcc3f28] do_syscall_64 at ffffffff81003c04
[ffffc9003fcc3f50] entry_SYSCALL_64_after_swapgs at ffffffff81742b8e

The ->inflight counter may be negative (-1) if

1) blk-iolatency was disabled when the IO was issued,

2) blk-iolatency was enabled before this IO reached its endio,

3) the ->inflight counter is decreased from 0 to -1 in endio()

In fact the hang can be easily reproduced by the below script,

H=/sys/fs/cgroup/unified/
P=/sys/fs/cgroup/unified/test

echo "+io" > $H/cgroup.subtree_control
mkdir -p $P

echo $$ > $P/cgroup.procs

xfs_io -f -d -c "pwrite 0 4k" /dev/sdg

echo "`cat /sys/block/sdg/dev` target=1000000" > $P/io.latency

xfs_io -f -d -c "pwrite 0 4k" /dev/sdg

This fixes the problem by freezing the queue so that while
enabling/disabling iolatency, there is no inflight rq running.

Note that quiesce_queue is not needed as this only updating iolatency
configuration about which dispatching request_queue doesn't care.

Signed-off-by: Liu Bo <bo.liu@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

qede: Fix system crash on configuring channels.

[ Upstream commit 0aa4febb420d91df5b56b1864a2465765da85f4b ]

Under heavy traffic load, when changing number of channels via
ethtool (ethtool -L) which will cause interface to be reloaded,
it was observed that some packets gets transmitted on old TX
channel/queue id which doesn't really exist after the channel
configuration leads to system crash.

Add a safeguard in the driver by validating queue id through
ndo_select_queue() which is called before the ndo_start_xmit().

Signed-off-by: Sudarsana Reddy Kalluru <skalluru@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

qed: Consider TX tcs while deriving the max num_queues for PF.

[ Upstream commit fb1faab74ddef9ec2d841d54e5d0912a097b3abe ]

Max supported queues is derived incorrectly in the case of multi-CoS.
Need to consider TCs while calculating num_queues for PF.

Signed-off-by: Sudarsana Reddy Kalluru <skalluru@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

qed: Fix EQ full firmware assert.

[ Upstream commit 660492bcf4a7561b5fdc13be0ae0b0c0a8c120be ]

When slowpath messages are sent with high rate, the resulting
events can lead to a FW assert in case they are not handled fast
enough (Event Queue Full assert). Attempt to send queued slowpath
messages only after the newly evacuated entries in the EQ ring
are indicated to FW.

Signed-off-by: Manish Chopra <manishc@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

fs: ratelimit __find_get_block_slow() failure message.

[ Upstream commit 43636c804df0126da669c261fc820fb22f62bfc2 ]

When something let __find_get_block_slow() hit all_mapped path, it calls
printk() for 100+ times per a second. But there is no need to print same
message with such high frequency; it is just asking for stall warning, or
at least bloating log files.

  [  399.866302][T15342] __find_get_block_slow() failed. block=1, b_blocknr=8
  [  399.873324][T15342] b_state=0x00000029, b_size=512
  [  399.878403][T15342] device loop0 blocksize: 4096
  [  399.883296][T15342] __find_get_block_slow() failed. block=1, b_blocknr=8
  [  399.890400][T15342] b_state=0x00000029, b_size=512
  [  399.895595][T15342] device loop0 blocksize: 4096
  [  399.900556][T15342] __find_get_block_slow() failed. block=1, b_blocknr=8
  [  399.907471][T15342] b_state=0x00000029, b_size=512
  [  399.912506][T15342] device loop0 blocksize: 4096

This patch reduces frequency to up to once per a second, in addition to
concatenating three lines into one.

  [  399.866302][T15342] __find_get_block_slow() failed. block=1, b_blocknr=8, b_state=0x00000029, b_size=512, device loop0 blocksize: 4096

Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nvme-pci: fix rapid add remove sequence

[ Upstream commit 5c959d73dba6495ec01d04c206ee679d61ccb2b0 ]

A surprise removal may fail to tear down request queues if it is racing
with the initial asynchronous probe. If that happens, the remove path
won't see the queue resources to tear down, and the controller reset
path may create a new request queue on a removed device, but will not
be able to make forward progress, deadlocking the pci removal.

Protect setting up non-blocking resources from a shutdown by holding the
same mutex, and transition to the CONNECTING state after these resources
are initialized so the probe path may see the dead controller state
before dispatching new IO.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=202081
Reported-by: Alex Gagniuc <Alex_Gagniuc@Dellteam.com>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Tested-by: Alex Gagniuc <mr.nuke.me@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nvme: lock NS list changes while handling command effects

[ Upstream commit e7ad43c3eda6a1690c4c3c341f95dc1c6898da83 ]

If a controller supports the NS Change Notification, the namespace
scan_work is automatically triggered after attaching a new namespace.

Occasionally the namespace scan_work may append the new namespace to the
list before the admin command effects handling is completed. The effects
handling unfreezes namespaces, but if it unfreezes the newly attached
namespace, its request_queue freeze depth will be off and we'll hit the
warning in blk_mq_unfreeze_queue().

On the next namespace add, we will fail to freeze that queue due to the
previous bad accounting and deadlock waiting for frozen.

Fix that by preventing scan work from altering the namespace list while
command effects handling needs to pair freeze with unfreeze.

Reported-by: Wen Xiong <wenxiong@us.ibm.com>
Tested-by: Wen Xiong <wenxiong@us.ibm.com>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/omap: dsi: Hack-fix DSI bus flags

[ Upstream commit 6297388e1eddd2f1345cea5892156223995bcf2d ]

Since commit b4935e3a3cfa ("drm/omap: Store bus flags in the
omap_dss_device structure") video mode flags are managed by the omapdss
(and later omapdrm) core based on bus flags stored in omap_dss_device.
This works fine for all devices whose video modes are set by the omapdss
and omapdrm core, but breaks DSI operation as the DSI still uses legacy
code paths and sets the DISPC timings manually.

To fix the problem properly we should move the DSI encoder to the new
encoder model. This will however require a considerable amount of work.
Restore DSI operation by adding back video mode flags handling in the
DSI encoder driver as a hack in the meantime.

Fixes: b4935e3a3cfa ("drm/omap: Store bus flags in the omap_dss_device structure")
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190111035120.20668-5-laurent.pinchart@ideasonboard.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/omap: dsi: Fix OF platform depopulate

[ Upstream commit 0940c52742de0d2f70ba687bfd5fe8aa38c5f27d ]

Commit edb715dffdee ("drm/omap: dss: dsi: Move initialization code from
bind to probe") moved the of_platform_populate() call from dsi_bind() to
dsi_probe(), but failed to move the corresponding
of_platform_depopulate() from dsi_unbind() to dsi_remove(). This results
in OF child devices being potentially removed multiple times. Fix it by
placing the of_platform_depopulate() call where it belongs.

Fixes: edb715dffdee ("drm/omap: dss: dsi: Move initialization code from bind to probe")
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190111035120.20668-4-laurent.pinchart@ideasonboard.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/omap: dsi: Fix crash in DSI debug dumps

[ Upstream commit 4df04ac9b37f278c48bb696289aff8f81226af4b ]

Reading any of the DSI debugfs files results in a crash, as wrong
pointer is passed to the dump functions, and the dump functions use a
wrong pointer. This patch fixes DSI debug dumps.

Fixes: f3ed97f9ae7d ("drm/omap: dsi: Simplify debugfs implementation")
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190111035120.20668-3-laurent.pinchart@ideasonboard.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amdgpu: use spin_lock_irqsave to protect vm_manager.pasid_idr

[ Upstream commit 0a5f49cbf9d6ad3721c16f8a6d823363ea7a160f ]

amdgpu_vm_get_task_info is called from interrupt handler and sched timeout
workqueue, we should use irq version spin_lock to avoid deadlock.

Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

i2c: omap: Use noirq system sleep pm ops to idle device for suspend

[ Upstream commit c6e2bd956936d925748581e4d0294f10f1d92f2c ]

We currently get the following error with pixcir_ts driver during a
suspend resume cycle:

omap_i2c 4802a000.i2c: controller timed out
pixcir_ts 1-005c: pixcir_int_enable: can't read reg 0x34 : -110
pixcir_ts 1-005c: Failed to disable interrupt generation: -110
pixcir_ts 1-005c: Failed to stop
dpm_run_callback(): pixcir_i2c_ts_resume+0x0/0x98
[pixcir_i2c_ts] returns -110
PM: Device 1-005c failed to resume: error -110

And at least am437x based devices with pixcir_ts will fail to resume
to a touchscreen that is configured as the wakeup-source in device
tree for these devices.

This is because pixcir_ts tries to reconfigure it's registers for
noirq suspend which fails. This also leaves i2c-omap in enabled state
for suspend.

Let's fix the pixcir_ts issue and make sure i2c-omap is suspended by
adding SET_NOIRQ_SYSTEM_SLEEP_PM_OPS.

Let's also get rid of some ifdefs while at it and replace them with
__maybe_unused as SET_RUNTIME_PM_OPS and SET_NOIRQ_SYSTEM_SLEEP_PM_OPS
already deal with the various PM Kconfig options.

Reported-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Acked-by: Vignesh R <vigneshr@ti.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Revert "scsi: libfc: Add WARN_ON() when deleting rports"

[ Upstream commit d8f6382a7d026989029e2e50c515df954488459b ]

This reverts commit bbc0f8bd88abefb0f27998f40a073634a3a2db89.

It added a warning whose intent was to check whether the rport was still
linked into the peer list. It doesn't work as intended and gives false
positive warnings for two reasons:

1) If the rport is never linked into the peer list it will not be
considered empty since the list_head is never initialized.

2) If the rport is deleted from the peer list using list_del_rcu(), then
the list_head is in an undefined state and it is not considered empty.

Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

MIPS: Remove function size check in get_frame_info()

[ Upstream commit 2b424cfc69728224fcb5fad138ea7260728e0901 ]

Patch (b6c7a324df37b "MIPS: Fix get_frame_info() handling of
microMIPS function size.") introduces additional function size
check for microMIPS by only checking insn between ip and ip + func_size.
However, func_size in get_frame_info() is always 0 if KALLSYMS is not
enabled. This causes get_frame_info() to return immediately without
calculating correct frame_size, which in turn causes "Can't analyze
schedule() prologue" warning messages at boot time.

This patch removes func_size check, and let the frame_size check run
up to 128 insns for both MIPS and microMIPS.

Signed-off-by: Jun-Ru Chang <jrjang@realtek.com>
Signed-off-by: Tony Wu <tonywu@realtek.com>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Fixes: b6c7a324df37b ("MIPS: Fix get_frame_info() handling of microMIPS function size.")
Cc: <ralf@linux-mips.org>
Cc: <jhogan@kernel.org>
Cc: <macro@mips.com>
Cc: <yamada.masahiro@socionext.com>
Cc: <peterz@infradead.org>
Cc: <mingo@kernel.org>
Cc: <linux-mips@vger.kernel.org>
Cc: <linux-kernel@vger.kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf trace: Support multiple "vfs_getname" probes

[ Upstream commit 6ab3bc240ade47a0f52bc16d97edd9accbe0024e ]

With a suitably defined "probe:vfs_getname" probe, 'perf trace' can
"beautify" its output, so syscalls like open() or openat() can print the
"filename" argument instead of just its hex address, like:

  $ perf trace -e open -- touch /dev/null
  [...]
       0.590 ( 0.014 ms): touch/18063 open(filename: /dev/null, flags: CREAT|NOCTTY|NONBLOCK|WRONLY, mode: IRUGO|IWUGO) = 3
  [...]

The output without such beautifier looks like:

     0.529 ( 0.011 ms): touch/18075 open(filename: 0xc78cf288, flags: CREAT|NOCTTY|NONBLOCK|WRONLY, mode: IRUGO|IWUGO) = 3

However, when the vfs_getname probe expands to multiple probes and it is
not the first one that is hit, the beautifier fails, as following:

     0.326 ( 0.010 ms): touch/18072 open(filename: , flags: CREAT|NOCTTY|NONBLOCK|WRONLY, mode: IRUGO|IWUGO) = 3

Fix it by hooking into all the expanded probes (inlines), now, for instance:

  [root@quaco ~]# perf probe -l
    probe:vfs_getname    (on getname_flags:73@fs/namei.c with pathname)
    probe:vfs_getname_1  (on getname_flags:73@fs/namei.c with pathname)
  [root@quaco ~]# perf trace -e open* sleep 1
       0.010 ( 0.005 ms): sleep/5588 openat(dfd: CWD, filename: /etc/ld.so.cache, flags: RDONLY|CLOEXEC)   = 3
       0.029 ( 0.006 ms): sleep/5588 openat(dfd: CWD, filename: /lib64/libc.so.6, flags: RDONLY|CLOEXEC)   = 3
       0.194 ( 0.008 ms): sleep/5588 openat(dfd: CWD, filename: /usr/lib/locale/locale-archive, flags: RDONLY|CLOEXEC) = 3
  [root@quaco ~]#

Works, further verified with:

  [root@quaco ~]# perf test vfs
  65: Use vfs_getname probe to get syscall args filenames   : Ok
  66: Add vfs_getname probe to get syscall args filenames   : Ok
  67: Check open filename arg using perf trace + vfs_getname: Ok
  [root@quaco ~]#

Reported-by: Michael Petlan <mpetlan@redhat.com>
Tested-by: Michael Petlan <mpetlan@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-mv8kolk17xla1smvmp3qabv1@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf symbols: Filter out hidden symbols from labels

[ Upstream commit 59a17706915fe5ea6f711e1f92d4fb706bce07fe ]

When perf is built with the annobin plugin (RHEL8 build) extra symbols
are added to its binary:

  # nm perf | grep annobin | head -10
  0000000000241100 t .annobin_annotate.c
  0000000000326490 t .annobin_annotate.c
  0000000000249255 t .annobin_annotate.c_end
  00000000003283a8 t .annobin_annotate.c_end
  00000000001bce18 t .annobin_annotate.c_end.hot
  00000000001bce18 t .annobin_annotate.c_end.hot
  00000000001bc3e2 t .annobin_annotate.c_end.unlikely
  00000000001bc400 t .annobin_annotate.c_end.unlikely
  00000000001bce18 t .annobin_annotate.c.hot
  00000000001bce18 t .annobin_annotate.c.hot
  ...

Those symbols have no use for report or annotation and should be
skipped.  Moreover they interfere with the DWARF unwind test on the PPC
arch, where they are mixed with checked symbols and then the test fails:

  # perf test dwarf -v
  59: Test dwarf unwind                                     :
  --- start ---
  test child forked, pid 8515
  unwind: .annobin_dwarf_unwind.c:ip = 0x10dba40dc (0x2740dc)
  ...
  got: .annobin_dwarf_unwind.c 0x10dba40dc, expecting test__arch_unwind_sample
  unwind: failed with 'no error'

The annobin symbols are defined as NOTYPE/LOCAL/HIDDEN:

  # readelf -s ./perf | grep annobin | head -1
    40: 00000000001bce4f     0 NOTYPE  LOCAL  HIDDEN    13 .annobin_init.c

They can still pass the check for the label symbol. Adding check for
HIDDEN and INTERNAL (as suggested by Nick below) visibility and filter
out such symbols.

>   Just to be awkward, if you are going to ignore STV_HIDDEN
>   symbols then you should probably also ignore STV_INTERNAL ones
>   as well...  Annobin does not generate them, but you never know,
>   one day some other tool might create some.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nick Clifton <nickc@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190128133526.GD15461@krava
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

s390/qeth: conclude all event processing before offlining a card

[ Upstream commit c0a2e4d10d9366ada133a8ae4ff2f32397f8b15b ]

Work for Bridgeport events is currently placed on a driver-wide
workqueue. If the card is removed and freed while any such work is still
active, this causes a use-after-free.
So put the events on a per-card queue, where we can control their
lifetime. As we also don't want stale events to last beyond an
offline & online cycle, flush this queue when setting the card offline.

Fixes: b4d72c08b358 ("qeth: bridgeport support - basic control")
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

s390/qeth: cancel close_dev work before removing a card

[ Upstream commit c2780c1a3fb724560b1d44f7976e0de17bf153c7 ]

A card's close_dev work is scheduled on a driver-wide workqueue. If the
card is removed and freed while the work is still active, this causes a
use-after-free.
So make sure that the work is completed before freeing the card.

Fixes: 0f54761d167f ("qeth: Support VEPA mode")
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

s390/qeth: fix use-after-free in error path

[ Upstream commit afa0c5904ba16d59b0454f7ee4c807dae350f432 ]

The error path in qeth_alloc_qdio_buffers() that takes care of
cleaning up the Output Queues is buggy. It first frees the queue, but
then calls qeth_clear_outq_buffers() with that very queue struct.

Make the call to qeth_clear_outq_buffers() part of the free action
(in the correct order), and while at it fix the naming of the helper.

Fixes: 0da9581ddb0f ("qeth: exploit asynchronous delivery of storage blocks")
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

s390/qeth: release cmd buffer in error paths

[ Upstream commit 5065b2dd3e5f9247a6c9d67974bc0472bf561b9d ]

Whenever we fail before/while starting an IO, make sure to release the
IO buffer. Usually qeth_irq() would do this for us, but if the IO
doesn't even start we obviously won't get an interrupt for it either.

Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfilter: nf_nat: skip nat clash resolution for same-origin entries

[ Upstream commit 4e35c1cb9460240e983a01745b5f29fe3a4d8e39 ]

It is possible that two concurrent packets originating from the same
socket of a connection-less protocol (e.g. UDP) can end up having
different IP_CT_DIR_REPLY tuples which results in one of the packets
being dropped.

To illustrate this, consider the following simplified scenario:

1. Packet A and B are sent at the same time from two different threads
   by same UDP socket.  No matching conntrack entry exists yet.
   Both packets cause allocation of a new conntrack entry.
2. get_unique_tuple gets called for A.  No clashing entry found.
   conntrack entry for A is added to main conntrack table.
3. get_unique_tuple is called for B and will find that the reply
   tuple of B is already taken by A.
   It will allocate a new UDP source port for B to resolve the clash.
4. conntrack entry for B cannot be added to main conntrack table
   because its ORIGINAL direction is clashing with A and the REPLY
   directions of A and B are not the same anymore due to UDP source
   port reallocation done in step 3.

This patch modifies nf_conntrack_tuple_taken so it doesn't consider
colliding reply tuples if the IP_CT_DIR_ORIGINAL tuples are equal.

[ Florian: simplify patch to not use .allow_clash setting
  and always ignore identical flows ]

Signed-off-by: Martynas Pumputis <martynas@weave.works>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests: netfilter: add simple masq/redirect test cases

[ Upstream commit 98bfc3414bda335dbd7fec58bde6266f991801d7 ]

Check basic nat/redirect/masquerade for ipv4 and ipv6.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests: netfilter: fix config fragment CONFIG_NF_TABLES_INET

[ Upstream commit 952b72f89ae23b316da8c1021b18d0c388ad6cc4 ]

In selftests the config fragment for netfilter was added as
NF_TABLES_INET=y and this patch correct it as CONFIG_NF_TABLES_INET=y

Signed-off-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dmaengine: dmatest: Abort test in case of mapping error

[ Upstream commit 6454368a804c4955ccd116236037536f81e5b1f1 ]

In case of mapping error the DMA addresses are invalid and continuing
will screw system memory or potentially something else.

[  222.480310] dmatest: dma0chan7-copy0: summary 1 tests, 3 failures 6 iops 349 KB/s (0)
...
[  240.912725] check: Corrupted low memory at 00000000c7c75ac9 (2940 phys) = 5656000000000000
[  240.921998] check: Corrupted low memory at 000000005715a1cd (2948 phys) = 279f2aca5595ab2b
[  240.931280] check: Corrupted low memory at 000000002f4024c0 (2950 phys) = 5e5624f349e793cf
...

Abort any test if mapping failed.

Fixes: 4076e755dbec ("dmatest: convert to dmaengine_unmap_data")
Cc: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

vsock/virtio: reset connected sockets on device removal

[ Upstream commit 85965487abc540368393a15491e6e7fcd230039d ]

When the virtio transport device disappear, we should reset all
connected sockets in order to inform the users.

Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

vsock/virtio: fix kernel panic after device hot-unplug

[ Upstream commit 22b5c0b63f32568e130fa2df4ba23efce3eb495b ]

virtio_vsock_remove() invokes the vsock_core_exit() also if there
are opened sockets for the AF_VSOCK protocol family. In this way
the vsock "transport" pointer is set to NULL, triggering the
kernel panic at the first socket activity.

This patch move the vsock_core_init()/vsock_core_exit() in the
virtio_vsock respectively in module_init and module_exit functions,
that cannot be invoked until there are open sockets.

Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1609699
Reported-by: Yan Fu <yafu@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dmaengine: at_xdmac: Fix wrongfull report of a channel as in use

[ Upstream commit dc3f595b6617ebc0307e0ce151e8f2f2b2489b95 ]

atchan->status variable is used to store two different information:
- pass channel interrupts status from interrupt handler to tasklet;
- channel information like whether it is cyclic or paused;

This causes a bug when device_terminate_all() is called,
(AT_XDMAC_CHAN_IS_CYCLIC cleared on atchan->status) and then a late End
of Block interrupt arrives (AT_XDMAC_CIS_BIS), which sets bit 0 of
atchan->status. Bit 0 is also used for AT_XDMAC_CHAN_IS_CYCLIC, so when
a new descriptor for a cyclic transfer is created, the driver reports
the channel as in use:

if (test_and_set_bit(AT_XDMAC_CHAN_IS_CYCLIC, &atchan->status)) {
dev_err(chan2dev(chan), "channel currently used\n");
return NULL;
}

This patch fixes the bug by adding a different struct member to keep
the interrupts status separated from the channel status bits.

Fixes: e1f7c9eee707 ("dmaengine: at_xdmac: creation of the atmel eXtended DMA Controller driver")
Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/sun4i: tcon: Prepare and enable TCON channel 0 clock at init

[ Upstream commit b14e945bda8ae227d1bf2b1837c0c4a61721cd1a ]

When initializing clocks, a reference to the TCON channel 0 clock is
obtained. However, the clock is never prepared and enabled later.
Switching from simplefb to DRM actually disables the clock (that was
usually configured by U-Boot) because of that.

On the V3s, this results in a hang when writing to some mixer registers
when switching over to DRM from simplefb.

Fix this by preparing and enabling the clock when initializing other
clocks. Waiting for sun4i_tcon_channel_enable to enable the clock is
apparently too late and results in the same mixer register access hang.

Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190131132550.26355-1-paul.kocialkowski@bootlin.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amdgpu: fix the incorrect external id for raven series

[ Upstream commit 7e4545d372b560df10fa47281ef0783a479ce435 ]

This patch fixes the incorrect external id that kernel reports to user mode
driver. Raven2's rev_id is starts from 0x8, so its external id (0x81) should
start from rev_id + 0x79 (0x81 - 0x8). And Raven's rev_id should be 0x21 while
rev_id == 1.

Reported-by: Crystal Jin <Crystal.Jin@amd.com>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amdgpu: Implement doorbell self-ring for NBIO 7.4

[ Upstream commit 12292519d919ecde92e7e7c8acbcdb9f0c7c6013 ]

Fixes doorbell reflection on Vega20.

Change-Id: I0495139d160a9032dff5977289b1eec11c16f781
Signed-off-by: Jay Cornwall <Jay.Cornwall@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf: Fix syscall's stackmap lookup potential deadlock

[ Upstream commit 7c4cd051add3d00bbff008a133c936c515eaa8fe ]

The map_lookup_elem used to not acquiring spinlock
in order to optimize the reader.

It was true until commit 557c0c6e7df8 ("bpf: convert stackmap to pre-allocation")
The syscall's map_lookup_elem(stackmap) calls bpf_stackmap_copy().
bpf_stackmap_copy() may find the elem no longer needed after the copy is done.
If that is the case, pcpu_freelist_push() saves this elem for reuse later.
This push requires a spinlock.

If a tracing bpf_prog got run in the middle of the syscall's
map_lookup_elem(stackmap) and this tracing bpf_prog is calling
bpf_get_stackid(stackmap) which also requires the same pcpu_freelist's
spinlock, it may end up with a dead lock situation as reported by
Eric Dumazet in https://patchwork.ozlabs.org/patch/1030266/

The situation is the same as the syscall's map_update_elem() which
needs to acquire the pcpu_freelist's spinlock and could race
with tracing bpf_prog. Hence, this patch fixes it by protecting
bpf_stackmap_copy() with this_cpu_inc(bpf_prog_active)
to prevent tracing bpf_prog from running.

A later syscall's map_lookup_elem commit f1a2e44a3aec ("bpf: add queue and stack maps")
also acquires a spinlock and races with tracing bpf_prog similarly.
Hence, this patch is forward looking and protects the majority
of the map lookups. bpf_map_offload_lookup_elem() is the exception
since it is for network bpf_prog only (i.e. never called by tracing
bpf_prog).

Fixes: 557c0c6e7df8 ("bpf: convert stackmap to pre-allocation")
Reported-by: Eric Dumazet <eric.dumazet@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf: fix potential deadlock in bpf_prog_register

[ Upstream commit e16ec34039c701594d55d08a5aa49ee3e1abc821 ]

Lockdep found a potential deadlock between cpu_hotplug_lock, bpf_event_mutex, and cpuctx_mutex:
[   13.007000] WARNING: possible circular locking dependency detected
[   13.007587] 5.0.0-rc3-00018-g2fa53f892422-dirty #477 Not tainted
[   13.008124] ------------------------------------------------------
[   13.008624] test_progs/246 is trying to acquire lock:
[   13.009030] 0000000094160d1d (tracepoints_mutex){+.+.}, at: tracepoint_probe_register_prio+0x2d/0x300
[   13.009770]
[   13.009770] but task is already holding lock:
[   13.010239] 00000000d663ef86 (bpf_event_mutex){+.+.}, at: bpf_probe_register+0x1d/0x60
[   13.010877]
[   13.010877] which lock already depends on the new lock.
[   13.010877]
[   13.011532]
[   13.011532] the existing dependency chain (in reverse order) is:
[   13.012129]
[   13.012129] -> #4 (bpf_event_mutex){+.+.}:
[   13.012582]        perf_event_query_prog_array+0x9b/0x130
[   13.013016]        _perf_ioctl+0x3aa/0x830
[   13.013354]        perf_ioctl+0x2e/0x50
[   13.013668]        do_vfs_ioctl+0x8f/0x6a0
[   13.014003]        ksys_ioctl+0x70/0x80
[   13.014320]        __x64_sys_ioctl+0x16/0x20
[   13.014668]        do_syscall_64+0x4a/0x180
[   13.015007]        entry_SYSCALL_64_after_hwframe+0x49/0xbe
[   13.015469]
[   13.015469] -> #3 (&cpuctx_mutex){+.+.}:
[   13.015910]        perf_event_init_cpu+0x5a/0x90
[   13.016291]        perf_event_init+0x1b2/0x1de
[   13.016654]        start_kernel+0x2b8/0x42a
[   13.016995]        secondary_startup_64+0xa4/0xb0
[   13.017382]
[   13.017382] -> #2 (pmus_lock){+.+.}:
[   13.017794]        perf_event_init_cpu+0x21/0x90
[   13.018172]        cpuhp_invoke_callback+0xb3/0x960
[   13.018573]        _cpu_up+0xa7/0x140
[   13.018871]        do_cpu_up+0xa4/0xc0
[   13.019178]        smp_init+0xcd/0xd2
[   13.019483]        kernel_init_freeable+0x123/0x24f
[   13.019878]        kernel_init+0xa/0x110
[   13.020201]        ret_from_fork+0x24/0x30
[   13.020541]
[   13.020541] -> #1 (cpu_hotplug_lock.rw_sem){++++}:
[   13.021051]        static_key_slow_inc+0xe/0x20
[   13.021424]        tracepoint_probe_register_prio+0x28c/0x300
[   13.021891]        perf_trace_event_init+0x11f/0x250
[   13.022297]        perf_trace_init+0x6b/0xa0
[   13.022644]        perf_tp_event_init+0x25/0x40
[   13.023011]        perf_try_init_event+0x6b/0x90
[   13.023386]        perf_event_alloc+0x9a8/0xc40
[   13.023754]        __do_sys_perf_event_open+0x1dd/0xd30
[   13.024173]        do_syscall_64+0x4a/0x180
[   13.024519]        entry_SYSCALL_64_after_hwframe+0x49/0xbe
[   13.024968]
[   13.024968] -> #0 (tracepoints_mutex){+.+.}:
[   13.025434]        __mutex_lock+0x86/0x970
[   13.025764]        tracepoint_probe_register_prio+0x2d/0x300
[   13.026215]        bpf_probe_register+0x40/0x60
[   13.026584]        bpf_raw_tracepoint_open.isra.34+0xa4/0x130
[   13.027042]        __do_sys_bpf+0x94f/0x1a90
[   13.027389]        do_syscall_64+0x4a/0x180
[   13.027727]        entry_SYSCALL_64_after_hwframe+0x49/0xbe
[   13.028171]
[   13.028171] other info that might help us debug this:
[   13.028171]
[   13.028807] Chain exists of:
[   13.028807]   tracepoints_mutex --> &cpuctx_mutex --> bpf_event_mutex
[   13.028807]
[   13.029666]  Possible unsafe locking scenario:
[   13.029666]
[   13.030140]        CPU0                    CPU1
[   13.030510]        ----                    ----
[   13.030875]   lock(bpf_event_mutex);
[   13.031166]                                lock(&cpuctx_mutex);
[   13.031645]                                lock(bpf_event_mutex);
[   13.032135]   lock(tracepoints_mutex);
[   13.032441]
[   13.032441]  *** DEADLOCK ***
[   13.032441]
[   13.032911] 1 lock held by test_progs/246:
[   13.033239]  #0: 00000000d663ef86 (bpf_event_mutex){+.+.}, at: bpf_probe_register+0x1d/0x60
[   13.033909]
[   13.033909] stack backtrace:
[   13.034258] CPU: 1 PID: 246 Comm: test_progs Not tainted 5.0.0-rc3-00018-g2fa53f892422-dirty #477
[   13.034964] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-2.el7 04/01/2014
[   13.035657] Call Trace:
[   13.035859]  dump_stack+0x5f/0x8b
[   13.036130]  print_circular_bug.isra.37+0x1ce/0x1db
[   13.036526]  __lock_acquire+0x1158/0x1350
[   13.036852]  ? lock_acquire+0x98/0x190
[   13.037154]  lock_acquire+0x98/0x190
[   13.037447]  ? tracepoint_probe_register_prio+0x2d/0x300
[   13.037876]  __mutex_lock+0x86/0x970
[   13.038167]  ? tracepoint_probe_register_prio+0x2d/0x300
[   13.038600]  ? tracepoint_probe_register_prio+0x2d/0x300
[   13.039028]  ? __mutex_lock+0x86/0x970
[   13.039337]  ? __mutex_lock+0x24a/0x970
[   13.039649]  ? bpf_probe_register+0x1d/0x60
[   13.039992]  ? __bpf_trace_sched_wake_idle_without_ipi+0x10/0x10
[   13.040478]  ? tracepoint_probe_register_prio+0x2d/0x300
[   13.040906]  tracepoint_probe_register_prio+0x2d/0x300
[   13.041325]  bpf_probe_register+0x40/0x60
[   13.041649]  bpf_raw_tracepoint_open.isra.34+0xa4/0x130
[   13.042068]  ? __might_fault+0x3e/0x90
[   13.042374]  __do_sys_bpf+0x94f/0x1a90
[   13.042678]  do_syscall_64+0x4a/0x180
[   13.042975]  entry_SYSCALL_64_after_hwframe+0x49/0xbe
[   13.043382] RIP: 0033:0x7f23b10a07f9
[   13.045155] RSP: 002b:00007ffdef42fdd8 EFLAGS: 00000202 ORIG_RAX: 0000000000000141
[   13.045759] RAX: ffffffffffffffda RBX: 00007ffdef42ff70 RCX: 00007f23b10a07f9
[   13.046326] RDX: 0000000000000070 RSI: 00007ffdef42fe10 RDI: 0000000000000011
[   13.046893] RBP: 00007ffdef42fdf0 R08: 0000000000000038 R09: 00007ffdef42fe10
[   13.047462] R10: 0000000000000000 R11: 0000000000000202 R12: 0000000000000000
[   13.048029] R13: 0000000000000016 R14: 00007f23b1db4690 R15: 0000000000000000

Since tracepoints_mutex will be taken in tracepoint_probe_register/unregister()
there is no need to take bpf_event_mutex too.
bpf_event_mutex is protecting modifications to prog array used in kprobe/perf bpf progs.
bpf_raw_tracepoints don't need to take this mutex.

Fixes: c4f6699dfcb8 ("bpf: introduce BPF_RAW_TRACEPOINT")
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf: fix lockdep false positive in percpu_freelist

[ Upstream commit a89fac57b5d080771efd4d71feaae19877cf68f0 ]

Lockdep warns about false positive:
[   12.492084] 00000000e6b28347 (&head->lock){+...}, at: pcpu_freelist_push+0x2a/0x40
[   12.492696] but this lock was taken by another, HARDIRQ-safe lock in the past:
[   12.493275]  (&rq->lock){-.-.}
[   12.493276]
[   12.493276]
[   12.493276] and interrupts could create inverse lock ordering between them.
[   12.493276]
[   12.494435]
[   12.494435] other info that might help us debug this:
[   12.494979]  Possible interrupt unsafe locking scenario:
[   12.494979]
[   12.495518]        CPU0                    CPU1
[   12.495879]        ----                    ----
[   12.496243]   lock(&head->lock);
[   12.496502]                                local_irq_disable();
[   12.496969]                                lock(&rq->lock);
[   12.497431]                                lock(&head->lock);
[   12.497890]   <Interrupt>
[   12.498104]     lock(&rq->lock);
[   12.498368]
[   12.498368]  *** DEADLOCK ***
[   12.498368]
[   12.498837] 1 lock held by dd/276:
[   12.499110]  #0: 00000000c58cb2ee (rcu_read_lock){....}, at: trace_call_bpf+0x5e/0x240
[   12.499747]
[   12.499747] the shortest dependencies between 2nd lock and 1st lock:
[   12.500389]  -> (&rq->lock){-.-.} {
[   12.500669]     IN-HARDIRQ-W at:
[   12.500934]                       _raw_spin_lock+0x2f/0x40
[   12.501373]                       scheduler_tick+0x4c/0xf0
[   12.501812]                       update_process_times+0x40/0x50
[   12.502294]                       tick_periodic+0x27/0xb0
[   12.502723]                       tick_handle_periodic+0x1f/0x60
[   12.503203]                       timer_interrupt+0x11/0x20
[   12.503651]                       __handle_irq_event_percpu+0x43/0x2c0
[   12.504167]                       handle_irq_event_percpu+0x20/0x50
[   12.504674]                       handle_irq_event+0x37/0x60
[   12.505139]                       handle_level_irq+0xa7/0x120
[   12.505601]                       handle_irq+0xa1/0x150
[   12.506018]                       do_IRQ+0x77/0x140
[   12.506411]                       ret_from_intr+0x0/0x1d
[   12.506834]                       _raw_spin_unlock_irqrestore+0x53/0x60
[   12.507362]                       __setup_irq+0x481/0x730
[   12.507789]                       setup_irq+0x49/0x80
[   12.508195]                       hpet_time_init+0x21/0x32
[   12.508644]                       x86_late_time_init+0xb/0x16
[   12.509106]                       start_kernel+0x390/0x42a
[   12.509554]                       secondary_startup_64+0xa4/0xb0
[   12.510034]     IN-SOFTIRQ-W at:
[   12.510305]                       _raw_spin_lock+0x2f/0x40
[   12.510772]                       try_to_wake_up+0x1c7/0x4e0
[   12.511220]                       swake_up_locked+0x20/0x40
[   12.511657]                       swake_up_one+0x1a/0x30
[   12.512070]                       rcu_process_callbacks+0xc5/0x650
[   12.512553]                       __do_softirq+0xe6/0x47b
[   12.512978]                       irq_exit+0xc3/0xd0
[   12.513372]                       smp_apic_timer_interrupt+0xa9/0x250
[   12.513876]                       apic_timer_interrupt+0xf/0x20
[   12.514343]                       default_idle+0x1c/0x170
[   12.514765]                       do_idle+0x199/0x240
[   12.515159]                       cpu_startup_entry+0x19/0x20
[   12.515614]                       start_kernel+0x422/0x42a
[   12.516045]                       secondary_startup_64+0xa4/0xb0
[   12.516521]     INITIAL USE at:
[   12.516774]                      _raw_spin_lock_irqsave+0x38/0x50
[   12.517258]                      rq_attach_root+0x16/0xd0
[   12.517685]                      sched_init+0x2f2/0x3eb
[   12.518096]                      start_kernel+0x1fb/0x42a
[   12.518525]                      secondary_startup_64+0xa4/0xb0
[   12.518986]   }
[   12.519132]   ... key      at: [<ffffffff82b7bc28>] __key.71384+0x0/0x8
[   12.519649]   ... acquired at:
[   12.519892]    pcpu_freelist_pop+0x7b/0xd0
[   12.520221]    bpf_get_stackid+0x1d2/0x4d0
[   12.520563]    ___bpf_prog_run+0x8b4/0x11a0
[   12.520887]
[   12.521008] -> (&head->lock){+...} {
[   12.521292]    HARDIRQ-ON-W at:
[   12.521539]                     _raw_spin_lock+0x2f/0x40
[   12.521950]                     pcpu_freelist_push+0x2a/0x40
[   12.522396]                     bpf_get_stackid+0x494/0x4d0
[   12.522828]                     ___bpf_prog_run+0x8b4/0x11a0
[   12.523296]    INITIAL USE at:
[   12.523537]                    _raw_spin_lock+0x2f/0x40
[   12.523944]                    pcpu_freelist_populate+0xc0/0x120
[   12.524417]                    htab_map_alloc+0x405/0x500
[   12.524835]                    __do_sys_bpf+0x1a3/0x1a90
[   12.525253]                    do_syscall_64+0x4a/0x180
[   12.525659]                    entry_SYSCALL_64_after_hwframe+0x49/0xbe
[   12.526167]  }
[   12.526311]  ... key      at: [<ffffffff838f7668>] __key.13130+0x0/0x8
[   12.526812]  ... acquired at:
[   12.527047]    __lock_acquire+0x521/0x1350
[   12.527371]    lock_acquire+0x98/0x190
[   12.527680]    _raw_spin_lock+0x2f/0x40
[   12.527994]    pcpu_freelist_push+0x2a/0x40
[   12.528325]    bpf_get_stackid+0x494/0x4d0
[   12.528645]    ___bpf_prog_run+0x8b4/0x11a0
[   12.528970]
[   12.529092]
[   12.529092] stack backtrace:
[   12.529444] CPU: 0 PID: 276 Comm: dd Not tainted 5.0.0-rc3-00018-g2fa53f892422 #475
[   12.530043] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-2.el7 04/01/2014
[   12.530750] Call Trace:
[   12.530948]  dump_stack+0x5f/0x8b
[   12.531248]  check_usage_backwards+0x10c/0x120
[   12.531598]  ? ___bpf_prog_run+0x8b4/0x11a0
[   12.531935]  ? mark_lock+0x382/0x560
[   12.532229]  mark_lock+0x382/0x560
[   12.532496]  ? print_shortest_lock_dependencies+0x180/0x180
[   12.532928]  __lock_acquire+0x521/0x1350
[   12.533271]  ? find_get_entry+0x17f/0x2e0
[   12.533586]  ? find_get_entry+0x19c/0x2e0
[   12.533902]  ? lock_acquire+0x98/0x190
[   12.534196]  lock_acquire+0x98/0x190
[   12.534482]  ? pcpu_freelist_push+0x2a/0x40
[   12.534810]  _raw_spin_lock+0x2f/0x40
[   12.535099]  ? pcpu_freelist_push+0x2a/0x40
[   12.535432]  pcpu_freelist_push+0x2a/0x40
[   12.535750]  bpf_get_stackid+0x494/0x4d0
[   12.536062]  ___bpf_prog_run+0x8b4/0x11a0

It has been explained that is a false positive here:
https://lkml.org/lkml/2018/7/25/756
Recap:
- stackmap uses pcpu_freelist
- The lock in pcpu_freelist is a percpu lock
- stackmap is only used by tracing bpf_prog
- A tracing bpf_prog cannot be run if another bpf_prog
  has already been running (ensured by the percpu bpf_prog_active counter).

Eric pointed out that this lockdep splats stops other
legit lockdep splats in selftests/bpf/test_progs.c.

Fix this by calling local_irq_save/restore for stackmap.

Another false positive had also been worked around by calling
local_irq_save in commit 89ad2fa3f043 ("bpf: fix lockdep splat").
That commit added unnecessary irq_save/restore to fast path of
bpf hash map. irqs are already disabled at that point, since htab
is holding per bucket spin_lock with irqsave.

Let's reduce overhead for htab by introducing __pcpu_freelist_push/pop
function w/o irqsave and convert pcpu_freelist_push/pop to irqsave
to be used elsewhere (right now only in stackmap).
It stops lockdep false positive in stackmap with a bit of acceptable overhead.

Fixes: 557c0c6e7df8 ("bpf: convert stackmap to pre-allocation")
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Reported-by: Eric Dumazet <eric.dumazet@gmail.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf: run bpf programs with preemption disabled

[ Upstream commit 6cab5e90ab2bd323c9f3811b6c70a4687df51e27 ]

Disabled preemption is necessary for proper access to per-cpu maps
from BPF programs.

But the sender side of socket filters didn't have preemption disabled:
unix_dgram_sendmsg->sk_filter->sk_filter_trim_cap->bpf_prog_run_save_cb->BPF_PROG_RUN

and a combination of af_packet with tun device didn't disable either:
tpacket_snd->packet_direct_xmit->packet_pick_tx_queue->ndo_select_queue->
tun_select_queue->tun_ebpf_select_queue->bpf_prog_run_clear_cb->BPF_PROG_RUN

Disable preemption before executing BPF programs (both classic and extended).

Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf, selftests: fix handling of sparse CPU allocations

[ Upstream commit 1bb54c4071f585ebef56ce8fdfe6026fa2cbcddd ]

Previously, bpf_num_possible_cpus() had a bug when calculating a
number of possible CPUs in the case of sparse CPU allocations, as
it was considering only the first range or element of
/sys/devices/system/cpu/possible.

E.g. in the case of "0,2-3" (CPU 1 is not available), the function
returned 1 instead of 3.

This patch fixes the function by making it parse all CPU ranges and
elements.

Signed-off-by: Martynas Pumputis <m@lambda.lt>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ath10k: correct bus type for WCN3990

[ Upstream commit 2c2008a63e482654ab137c84d3c61c03b75e7df6 ]

WCN3990 is SNOC, not PCI. This prevents probing WCN3990.

Fixes: 367c899f622c ("ath10k: add bus type check in ath10k_init_hw_params")
Signed-off-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

relay: check return of create_buf_file() properly

[ Upstream commit 2c1cf00eeacb784781cf1c9896b8af001246d339 ]

If create_buf_file() returns an error, don't try to reference it later
as a valid dentry pointer.

This problem was exposed when debugfs started to return errors instead
of just NULL for some calls when they do not succeed properly.

Also, the check for WARN_ON(dentry) was just wrong :)

Reported-by: Kees Cook <keescook@chromium.org>
Reported-and-tested-by: syzbot+16c3a70e1e9b29346c43@syzkaller.appspotmail.com
Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: David Rientjes <rientjes@google.com>
Fixes: ff9fb72bc077 ("debugfs: return error values, not NULL")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

irqchip/gic-v3-its: Fix ITT_entry_size accessor

[ Upstream commit 56841070ccc87b463ac037d2d1f2beb8e5e35f0c ]

According to ARM IHI 0069C (ID070116), we should use GITS_TYPER's
bits [7:4] as ITT_entry_size instead of [8:4]. Although this is
pretty annoying, it only results in a potential over-allocation
of memory, and nothing bad happens.

Fixes: 3dfa576bfb45 ("irqchip/gic-v3-its: Add probing for VLPI properties")
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
[maz: massaged subject and commit message]
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: stmmac: Disable EEE mode earlier in XMIT callback

[ Upstream commit e2cd682deb231ba6f80524bb84e57e7138261149 ]

In stmmac xmit callback we use a different flow for TSO packets but TSO
xmit callback is not disabling the EEE mode.

Fix this by disabling earlier the EEE mode, i.e. before calling the TSO
xmit callback.

Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: stmmac: Send TSO packets always from Queue 0

[ Upstream commit c5acdbee22a1b200dde07effd26fd1f649e9ab8a ]

The number of TSO enabled channels in HW can be different than the
number of total channels. There is no way to determined, at runtime, the
number of TSO capable channels and its safe to assume that if TSO is
enabled then at least channel 0 will be TSO capable.

Lets always send TSO packets from Queue 0.

Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: stmmac: Fallback to Platform Data clock in Watchdog conversion

[ Upstream commit 4ec5302fa906ec9d86597b236f62315bacdb9622 ]

If we don't have DT then stmmac_clk will not be available. Let's add a
new Platform Data field so that we can specify the refclk by this mean.

This way we can still use the coalesce command in PCI based setups.

Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amdgpu: Transfer fences to dmabuf importer

[ Upstream commit 6e11ea9de9576a644045ffdc2067c09bc2012eda ]

amdgpu only uses shared-fences internally, but dmabuf importers rely on
implicit write hazard tracking via the reservation_object.fence_excl.
For example, the importer use the write hazard for timing a page flip to
only occur after the exporter has finished flushing its write into the
surface. As such, on exporting a dmabuf, we must either flush all
outstanding fences (for we do not know which are writes and should have
been exclusive) or alternatively create a new exclusive fence that is
the composite of all the existing shared fences, and so will only be
signaled when all earlier fences are signaled (ensuring that we can not
be signaled before the completion of any earlier write).

v2: reservation_object is already locked by amdgpu_bo_reserve()
v3: Replace looping with get_fences_rcu and special case the promotion
of a single shared fence directly to an exclusive fence, bypassing the
fence array.
v4: Drop the fence array ref after assigning to reservation_object

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107341
Testcase: igt/amd_prime/amd-to-i915
References: 8e94a46c1770 ("drm/amdgpu: Attach exclusive fence to prime exported bo's. (v5)")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Reviewed-by: "Christian König" <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/radeon: check if device is root before getting pci speed caps

[ Upstream commit afeff4c16edaa6275b903f82b0561406259aa3a3 ]

Check if the device is root rather before attempting to see what
speeds the pcie port supports. Fixes a crash with pci passthrough
in a VM.

Bug: https://bugs.freedesktop.org/show_bug.cgi?id=109366
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amdgpu: Add missing power attribute to APU check

[ Upstream commit dc14eb12f6bb3e779c5461429c1889a339c67aab ]

Add missing power_average to visible check for power
attributes for APUs. Was missed before.

Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

irqchip/mmp: Only touch the PJ4 IRQ & FIQ bits on enable/disable

[ Upstream commit 2380a22b60ce6f995eac806e69c66e397b59d045 ]

Resetting bit 4 disables the interrupt delivery to the "secure
processor" core. This breaks the keyboard on a OLPC XO 1.75 laptop,
where the firmware running on the "secure processor" bit-bangs the
PS/2 protocol over the GPIO lines.

It is not clear what the rest of the bits are and Marvell was unhelpful
when asked for documentation. Aside from the SP bit, there are probably
priority bits.

Leaving the unknown bits as the firmware set them up seems to be a wiser
course of action compared to just turning them off.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Acked-by: Pavel Machek <pavel@ucw.cz>
[maz: fixed-up subject and commit message]
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

irqchip/gic-v3-its: Gracefully fail on LPI exhaustion

[ Upstream commit 45725e0fc3e7fe52fedb94f59806ec50e9618682 ]

In the unlikely event that we cannot find any available LPI in the
system, we should gracefully return an error instead of carrying
on with no LPI allocated at all.

Fixes: 38dd7c494cf6 ("irqchip/gic-v3-its: Drop chunk allocation compatibility")
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

irqchip/gic-v4: Fix occasional VLPI drop

[ Upstream commit 6479450f72c1391c03f08affe0d0110f41ae7ca0 ]

1. In current implementation, every VLPI will temporarily be mapped to
the first CPU in system (normally CPU0) and then moved to the real
scheduled CPU later.

2. So there is a time window and a VLPI may be sent to CPU0 instead of
the real scheduled vCPU, in a multi-CPU virtual machine.

3. However, CPU0 may have not been scheduled as a virtual CPU after
system boots up, so the value of its GICR_VPROPBASER is unknown at
that moment.

4. If the INTID of VLPI is larger than 2^(GICR_VPROPBASER.IDbits+1),
while IDbits is also in unknown state, GIC will behave as if the VLPI
is out of range and simply drop it, which results in interrupt missing
in Guest.

As no code will clear GICR_VPROPBASER at runtime, we can safely
initialize the IDbits field at boot time for each CPU to get rid of
this issue.

We also clear Valid bit of GICR_VPENDBASER in case any ancient
programming gets left in and causes memory corrupting. A new function
its_clear_vpend_valid() is added to reuse the code in
its_vpe_deschedule().

Fixes: e643d8034036 ("irqchip/gic-v3-its: Add VPE scheduling")
Signed-off-by: Heyi Guo <guoheyi@huawei.com>
Signed-off-by: Heyi Guo <heyi.guo@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: dwc3: exynos: Fix error handling of clk_prepare_enable

[ Upstream commit 512e6fb589bc18f9321457632e89b95017447db9 ]

If clk_prepare_enable() fails in dwc3_exynos_probe() or in
dwc3_exynos_resume(), exynos->clks[0] is left undisabled
because of usage preincrement in while condition.

Found by Linux Driver Verification project (linuxtesting.org).

Fixes: 9f2168367a0a ("usb: dwc3: exynos: Rework clock handling and prepare for new variants")
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: phy: fix link errors

[ Upstream commit f2105d42597f4d10e431b195d69e96dccaf9b012 ]

Fix link errors when CONFIG_FSL_USB2_OTG is enabled and USB_OTG_FSM is
set to module then the following link error occurs.

aarch64-linux-gnu-ld: drivers/usb/phy/phy-fsl-usb.o: in function `fsl_otg_ioctl':
drivers/usb/phy/phy-fsl-usb.c:1083: undefined reference to `otg_statemachine'
aarch64-linux-gnu-ld: drivers/usb/phy/phy-fsl-usb.c:1083:(.text+0x574): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `otg_statemachine'
aarch64-linux-gnu-ld: drivers/usb/phy/phy-fsl-usb.o: in function `fsl_otg_start_srp':
drivers/usb/phy/phy-fsl-usb.c:674: undefined reference to `otg_statemachine'
aarch64-linux-gnu-ld: drivers/usb/phy/phy-fsl-usb.c:674:(.text+0x61c): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `otg_statemachine'
aarch64-linux-gnu-ld: drivers/usb/phy/phy-fsl-usb.o: in function `fsl_otg_set_host':
drivers/usb/phy/phy-fsl-usb.c:593: undefined reference to `otg_statemachine'
aarch64-linux-gnu-ld: drivers/usb/phy/phy-fsl-usb.c:593:(.text+0x7a4): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `otg_statemachine'
aarch64-linux-gnu-ld: drivers/usb/phy/phy-fsl-usb.o: in function `fsl_otg_start_hnp':
drivers/usb/phy/phy-fsl-usb.c:695: undefined reference to `otg_statemachine'
aarch64-linux-gnu-ld: drivers/usb/phy/phy-fsl-usb.c:695:(.text+0x858): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `otg_statemachine'
aarch64-linux-gnu-ld: drivers/usb/phy/phy-fsl-usb.o: in function `a_wait_enum':
drivers/usb/phy/phy-fsl-usb.c:274: undefined reference to `otg_statemachine'
aarch64-linux-gnu-ld: drivers/usb/phy/phy-fsl-usb.c:274:(.text+0x16f0): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `otg_statemachine'
aarch64-linux-gnu-ld: drivers/usb/phy/phy-fsl-usb.o:drivers/usb/phy/phy-fsl-usb.c:619: more undefined references to `otg_statemachine' follow
aarch64-linux-gnu-ld: drivers/usb/phy/phy-fsl-usb.o: in function `fsl_otg_set_peripheral':
drivers/usb/phy/phy-fsl-usb.c:619:(.text+0x1fa0): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `otg_statemachine'
make[1]: *** [Makefile:1020: vmlinux] Error 1
make[1]: Target 'Image' not remade because of errors.
make: *** [Makefile:152: sub-make] Error 2
make: Target 'Image' not remade because of errors.

Rework so that FSL_USB2_OTG depends on that the USB_OTG_FSM is builtin.

Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

DTS: CI20: Fix bugs in ci20's device tree.

[ Upstream commit 1ca1c87f91d9dc50d6a38e2177b2032996e7901c ]

According to the Schematic, the hardware of ci20 leads to uart3,
but not to uart2. Uart2 is miswritten in the original code.

Signed-off-by: Zhou Yanjie <zhouyanjie@cduestc.edu.cn>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: linux-mips <linux-mips@vger.kernel.org>
Cc: linux-kernel <linux-kernel@vger.kernel.org>
Cc: devicetree@vger.kernel.org
Cc: robh+dt@kernel.org
Cc: ralf@linux-mips.org
Cc: jhogan@kernel.org
Cc: mark.rutland@arm.com
Cc: malat@debian.org
Cc: ezequiel@collabora.co.uk
Cc: ulf.hansson@linaro.org
Cc: syq <syq@debian.org>
Cc: jiaxun.yang <jiaxun.yang@flygoat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

MIPS: DTS: jz4740: Correct interrupt number of DMA core

[ Upstream commit 70999ec1c9d3f783a7232973cfc26971e5732758 ]

The interrupt number set in the devicetree node of the DMA driver was
wrong.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: devicetree@vger.kernel.org
Cc: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

batman-adv: release station info tidstats

[ Upstream commit 7d652669b61d702c6e62a39579d17f6881670ab6 ]

With the addition of TXQ stats in the per-tid statistics the struct
station_info grew significantly. This resulted in stack size warnings
due to the structure itself being above the limit for the warnings.

To work around this, the TID array was allocated dynamically. Also a
function to free this content was introduced with commit 7ea3e110f2f8
("cfg80211: release station info tidstats where needed") but the necessary
changes were not provided for batman-adv's B.A.T.M.A.N. V implementation.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
Fixes: 8689c051a201 ("cfg80211: dynamically allocate per-tid stats for station info")
[sven@narfation.org: add commit message]
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: add msm8996 compatible to gicv3

[ Upstream commit 2a81efb0de0e33f2d2c83154af0bd3ce389b3269 ]

Add compatible to gicv3 node to enable quirk required to restrict writing
to GICR_WAKER register which is restricted on msm8996 SoC in Hypervisor.

With this quirk MSM8996 can at least boot out of mainline, which can help
community to work with boards based on MSM8996.

Without this patch Qualcomm DB820c board reboots on mainline.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: am335x-shc.dts: fix wrong cd pin level

[ Upstream commit 063c20e12f8bbbc10cabc2413606b140085beb62 ]

cd pin on mmc1 is GPIO_ACTIVE_LOW not GPIO_ACTIVE_HIGH

Fixes: e63201f19438 ("mmc: omap_hsmmc: Delete platform data GPIO CD and WP")
Signed-off-by: Heiko Schocher <hs@denx.de>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: n900: fix mmc1 card detect gpio polarity

[ Upstream commit ac9c908eecde3ed252cb1d67fc79b3c1346f76bc ]

Wrong polarity of card detect GPIO pin leads to the system not
booting from external mmc, if the back cover of N900 is closed.
When the cover is open the system boots fine.

This wasn't noticed before, because of a bug, which was fixed
by commit e63201f19 (mmc: omap_hsmmc: Delete platform data GPIO
CD and WP).

Kernels up to 4.19 ignored the card detect GPIO from DT.

Fixes: e63201f19438 ("mmc: omap_hsmmc: Delete platform data GPIO CD and WP")
Signed-off-by: Arthur Demchenkov <spinal.by@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: omap3-gta04: Fix graph_port warning

[ Upstream commit 5b90df44fd9b415d8c5d11b92746212a63d3c47f ]

We're currently getting a warning with make dtbs:

arch/arm/boot/dts/omap3-gta04.dtsi:720.7-727.4: Warning (graph_port):
/ocp@68000000/dss@48050000/encoder@48050c0 0/port: graph node unit
address error, expected "0"

Tested-by: H. Nikolaus Schaller <hns@goldelico.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: pxa: ssp: unneeded to free devm_ allocated data

[ Upstream commit ba16adeb346387eb2d1ada69003588be96f098fa ]

devm_ allocated data will be automatically freed. The free
of devm_ allocated data is invalid.

Fixes: 1c459de1e645 ("ARM: pxa: ssp: use devm_ functions")
Signed-off-by: Peng Hao <peng.hao2@zte.com.cn>
[title's prefix changed]
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf: sock recvbuff must be limited by rmem_max in bpf_setsockopt()

[ Upstream commit c9e4576743eeda8d24dedc164d65b78877f9a98c ]

When sock recvbuff is set by bpf_setsockopt(), the value must by
limited by rmem_max. It is the same with sendbuff.

Fixes: 8c4b4c7e9ff0 ("bpf: Add setsockopt helper function to bpf")
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Lawrence Brakmo <brakmo@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpftool: fix percpu maps updating

[ Upstream commit b0ca5ecb8e2279d706261f525f1bd0ba9e3fe800 ]

When updating a percpu map, bpftool currently copies the provided
value only into the first per CPU copy of the specified value,
all others instances are left zeroed.

This change explicitly copies the user-provided bytes to all the
per CPU instances, keeping the sub-command syntax unchanged.

v2 -> v3:
- drop unused argument, as per Quentin's suggestion
v1 -> v2:
- rename the helper as per Quentin's suggestion

Fixes: 71bb428fe2c1 ("tools: bpf: add bpftool")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpftool: Fix prog dump by tag

[ Upstream commit 752bcf80f5549c9901b2e8bc77b2138de55b1026 ]

Lance reported an issue with bpftool not being able to
dump program if there are more programs loaded and you
want to dump any but the first program, like:

  # bpftool prog
  28: kprobe  name trace_req_start  tag 1dfc28ba8b3dd597  gpl
   loaded_at 2019-01-18T17:02:40+1100  uid 0
   xlated 112B  jited 109B  memlock 4096B  map_ids 13
  29: kprobe  name trace_req_compl  tag 5b6a5ecc6030a683  gpl
   loaded_at 2019-01-18T17:02:40+1100  uid 0
   xlated 928B  jited 575B  memlock 4096B  map_ids 13,14
  #  bpftool prog dum jited tag 1dfc28ba8b3dd597
   0: push   %rbp
   1: mov    %rsp,%rbp
  ...

  #  bpftool prog dum jited tag 5b6a5ecc6030a683
  Error: can't get prog info (29): Bad address

The problem is in the prog_fd_by_tag function not cleaning
the struct bpf_prog_info before another request, so the
previous program length is still in there and kernel assumes
it needs to dump the program, which fails because there's no
user pointer set.

Moving the struct bpf_prog_info declaration into the loop,
so it gets cleaned before each query.

Fixes: 71bb428fe2c1 ("tools: bpf: add bpftool")
Reported-by: Lance Digby <ldigby@redhat.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wlcore: sdio: Fixup power on/off sequence

[ Upstream commit 13e62626c578d9889ebbda7c521be5adff9bef8e ]

During "wlan-up", we are programming the FW into the WiFi-chip. However,
re-programming the FW doesn't work, unless a power cycle of the WiFi-chip
is made in-between the programmings.

To conform to this requirement and to fix the regression in a simple way,
let's start by allowing that the SDIO card (WiFi-chip) may stay powered on
(runtime resumed) when wl12xx_sdio_power_off() returns. The intent with the
current code is to treat this scenario as an error, but unfortunate this
doesn't work as expected, so let's fix this.

The other part is to guarantee that a power cycle of the SDIO card has been
completed when wl12xx_sdio_power_on() returns, as to allow the FW
programming to succeed. However, relying solely on runtime PM to deal with
this isn't sufficient. For example, userspace may prevent runtime suspend
via sysfs for the device that represents the SDIO card, leading to that the
mmc core also keeps it powered on. For this reason, let's instead do a
brute force power cycle in wl12xx_sdio_power_on().

Fixes: 728a9dc61f13 ("wlcore: sdio: Fix flakey SDIO runtime PM handling")
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Tested-by: Tony Lindgren <tony@atomide.com>
Tested-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pinctrl: mcp23s08: spi: Fix regmap allocation for mcp23s18

[ Upstream commit f165988b77ef849eb0c1aebd94fe778024f88314 ]

Fixes issue created by 9b3e4207661e67f04c72af15e29f74cd944f5964.

It wasn't possible for one_regmap_config to be non-NULL at the point
it was tested for mcp23s18 devices.

Applied the same pattern of allocating one_regmap_config using
devm_kmemdump() and then initializing the local regmap structure
from that.

Signed-off-by: Jason Kridner <jdk@ti.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

soc: fsl: qbman: avoid race in clearing QMan interrupt

[ Upstream commit 89857a8a5c89a406b967ab2be7bd2ccdbe75e73d ]

By clearing all interrupt sources, not only those that
already occurred, the existing code may acknowledge by
mistake interrupts that occurred after the code checks
for them.

Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
Signed-off-by: Roy Pledge <roy.pledge@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: renesas: r8a77965: Enable DMA for SCIF2

[ Upstream commit 05c8478abd485507c25aa565afab604af8d8fe46 ]

SCIF2 on R-Car M3-N can be used with both DMAC1 and DMAC2.

Fixes: 0ea5b2fd38db56aa ("arm64: dts: renesas: r8a77965: Add SCIF device nodes")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: renesas: r8a7796: Enable DMA for SCIF2

[ Upstream commit 97f26702bc95b5c3a72671d5c6675e4d6ee0a2f4 ]

SCIF2 on R-Car M3-W can be used with both DMAC1 and DMAC2.

Fixes: dbcae5ea4bd27409 ("arm64: dts: r8a7796: Enable SCIF DMA")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: imx6sx: correct backward compatible of gpt

[ Upstream commit ba0f4560526ba19300c07ed5a3c1df7592815dc6 ]

i.MX6SX has same GPT type as i.MX6DL, in GPT driver, it uses
below TIMER_OF_DECLARE, so the backward compatible should be
"fsl,imx6dl-gpt", correct it.

TIMER_OF_DECLARE(imx6sx_timer, "fsl,imx6sx-gpt", imx6dl_timer_init_dt);

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

signal: Make siginmask safe when passed a signal of 0

[ Upstream commit ee17e5d6201c66492a0e8053190fca2ed2b8457d ]

Eric Biggers reported:
> The following commit, which went into v4.20, introduced undefined behavior when
> sys_rt_sigqueueinfo() is called with sig=0:
>
> commit 4ce5f9c9e7546915c559ffae594e6d73f918db00
> Author: Eric W. Biederman <ebiederm@xmission.com>
> Date:   Tue Sep 25 12:59:31 2018 +0200
>
>     signal: Use a smaller struct siginfo in the kernel
>
> In sig_specific_sicodes(), used from known_siginfo_layout(), the expression
> '1ULL << ((sig)-1)' is undefined as it evaluates to 1ULL << 4294967295.
>
> Reproducer:
>
> #include <signal.h>
> #include <sys/syscall.h>
> #include <unistd.h>
>
> int main(void)
> {
> siginfo_t si = { .si_code = 1 };
> syscall(__NR_rt_sigqueueinfo, 0, 0, &si);
> }
>
> UBSAN report for v5.0-rc1:
>
> UBSAN: Undefined behaviour in kernel/signal.c:2946:7
> shift exponent 4294967295 is too large for 64-bit type 'long unsigned int'
> CPU: 2 PID: 346 Comm: syz_signal Not tainted 5.0.0-rc1 #25
> Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014
> Call Trace:
>  __dump_stack lib/dump_stack.c:77 [inline]
>  dump_stack+0x70/0xa5 lib/dump_stack.c:113
>  ubsan_epilogue+0xd/0x40 lib/ubsan.c:159
>  __ubsan_handle_shift_out_of_bounds+0x12c/0x170 lib/ubsan.c:425
>  known_siginfo_layout+0xae/0xe0 kernel/signal.c:2946
>  post_copy_siginfo_from_user kernel/signal.c:3009 [inline]
>  __copy_siginfo_from_user+0x35/0x60 kernel/signal.c:3035
>  __do_sys_rt_sigqueueinfo kernel/signal.c:3553 [inline]
>  __se_sys_rt_sigqueueinfo kernel/signal.c:3549 [inline]
>  __x64_sys_rt_sigqueueinfo+0x31/0x70 kernel/signal.c:3549
>  do_syscall_64+0x4c/0x1b0 arch/x86/entry/common.c:290
>  entry_SYSCALL_64_after_hwframe+0x49/0xbe
> RIP: 0033:0x433639
> Code: c4 18 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 7b 27 00 00 c3 66 2e 0f 1f 84 00 00 00 00
> RSP: 002b:00007fffcb289fc8 EFLAGS: 00000246 ORIG_RAX: 0000000000000081
> RAX: ffffffffffffffda RBX: 00000000004002e0 RCX: 0000000000433639
> RDX: 00007fffcb289fd0 RSI: 0000000000000000 RDI: 0000000000000000
> RBP: 00000000006b2018 R08: 000000000000004d R09: 0000000000000000
> R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000401560
> R13: 00000000004015f0 R14: 0000000000000000 R15: 0000000000000000

I have looked at the other callers of siginmask and they all appear to
in locations where sig can not be zero.

I have looked at the code generation of adding an extra test against
zero and gcc was able with a simple decrement instruction to combine
the two tests together. So the at most adding this test cost a single
cpu cycle.  In practice that decrement instruction was already present
as part of the mask comparison, so the only change was when the
instruction was executed.

So given that it is cheap, and obviously correct to update siginmask
to verify the signal is not zero.  Fix this issue there to avoid any
future problems.

Reported-by: Eric Biggers <ebiggers@kernel.org>
Fixes: 4ce5f9c9e754 ("signal: Use a smaller struct siginfo in the kernel")
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: meson8m2: mxiii-plus: mark the SD card detection GPIO active-low

[ Upstream commit 8615f5596335db0978cea593dcd0070dc5f8b116 ]

After commit 89a5e15bcba87d ("gpio/mmc/of: Respect polarity in the device
tree") SD cards are not detected anymore.

The CD GPIO is "active low" on the MXIII-Plus. The MMC dt-bindings
specify: "[...] using the "cd-inverted" property means, that the CD line
is active high, i.e. it is high, when a card is inserted".

Fix the description of the SD card by marking it as GPIO_ACTIVE_LOW and
drop the "cd-inverted" property. This makes the definition consistent
with the existing dt-bindings and fixes the check whether an SD card is
inserted.

Fixes: 35ee52bea66c74 ("ARM: dts: meson8m2: add support for the Tronsmart MXIII Plus")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: meson8b: ec100: mark the SD card detection GPIO active-low

[ Upstream commit c8bfe65fb1fb7a43d766df1dfa379406112cba61 ]

After commit 89a5e15bcba87d ("gpio/mmc/of: Respect polarity in the device
tree") SD cards are not detected anymore.

The CD GPIO is "active low" on the EC-100. The MMC dt-bindings specify:
"[...] using the "cd-inverted" property means, that the CD line is active
high, i.e. it is high, when a card is inserted".

Fix the description of the SD card by marking it as GPIO_ACTIVE_LOW and
drop the "cd-inverted" property. This makes the definition consistent
with the existing dt-bindings and fixes the check whether an SD card is
inserted.

Fixes: bbedc1f1d90e33 ("ARM: dts: meson8b: Add support for the Endless Mini (EC-100)")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: meson8b: odroidc1: mark the SD card detection GPIO active-low

[ Upstream commit 3fb348e030319f20ebbde082a449d4bf8a96f2fd ]

After commit 89a5e15bcba87d ("gpio/mmc/of: Respect polarity in the device
tree") SD cards are not detected anymore.

The CD GPIO is "active low" on Odroid-C1. The MMC dt-bindings specify:
"[...] using the "cd-inverted" property means, that the CD line is active
high, i.e. it is high, when a card is inserted".

Fix the description of the SD card by marking it as GPIO_ACTIVE_LOW and
drop the "cd-inverted" property. This makes the definition consistent
with the existing dt-bindings and fixes the check whether an SD card is
inserted.

Fixes: e03efbce6bebf5 ("ARM: dts: meson8b-odroidc1: add microSD support")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Anand Moon <linux.amoon@gmail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm: dts: meson: Fix IRQ trigger type for macirq

[ Upstream commit e35e26b26e955c53e61c154ba26b9bb15da6b858 ]

A long running stress test on a custom board shipping an AXG SoCs and a
Realtek RTL8211F PHY revealed that after a few hours the connection
speed would drop drastically, from ~1000Mbps to ~3Mbps. At the same time
the 'macirq' (eth0) IRQ would stop being triggered at all and as
consequence the GMAC IRQs never ACKed.

After a painful investigation the problem seemed to be due to a wrong
defined IRQ type for the GMAC IRQ that should be LEVEL_HIGH instead of
EDGE_RISING.

The change in the macirq IRQ type also solved another long standing
issue affecting this SoC/PHY where EEE was causing the network
connection to die after stressing it with iperf3 (even though much
sooner). It's now possible to remove the 'eee-broken-1000t' quirk as
well.

Fixes: 9c15795a4f96 ("ARM: dts: meson8b-odroidc1: ethernet support")
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>